thank you for purchasing fuvision!
TRANSCRIPT
Emai: [email protected]
Thank you for purchasing FUVISION!Before you begin,please make sure you have the following minimum requirements:1.Home WiFi network(2.4GHz only)2.You may possibly need a Wi-Fi extender if your Wi-Fi signal is weak around the yard where you want to install it.3. Please format the micro SD card to FAT32 format and install the card when camera powered off.(Micro SD card is not included in the package) 4. Please charge your A8 camera before you set it up, it usually takes up to 10-12 hours to fully charge it.Do not use any power adaptor exceed 5V/2A,or it may damage the camera. (There's no indicator to show charging status from the camera) 5. Make sure the distance between your phone,router and the camera is no more than 1.5 feet when you're ready to pair the camera. Ensure that the Wi-fi signal strength on your phone is good. 6. The PIR range is 16 feet around,the recommend camera install height is 8 feet around.To avoid too much false alarms, we suggest you do not install the camera with nearby bushes,shrubs, grasses and tree leaves coming into the PIR range. 7. To ensure an accurate motion detection function,it is suggested to adjust the camera angle physically to focus the motion area within the PIR suggested 16ft range.
To install your device,you can:A)Follow the in-app instructions as directed.B)Follow the steps listed in this guide.C)Contact us through email for our in-depth setup guide and troubleshooting information. After-sale email:[email protected]
Front
The first methodQR code bridging(recommended)
Step 1:Download App:ToSee
Please ensure to allow location access to "TOSEE" App,otherwise you may be troubled in selecting your WiFi network in the next steps.
Step 2:Open the App,click “+” and “QRcode Bridging”
Step 3:Power on the camera and reset the camera, you can see the camera is flashing red if you reset it successfully,otherwise reset again.
Step 4:Click “The Red Light is Flashing” when the device red light flashing
Step 5:Choose your home WiFi and input your password,click “Next”
Choose your network
input your password
Step 6:Use the device to scan the QR code (recommend 12 inch distance between device and QR code),click “Next” after you hear the prompt music and voice
Step 7:Wait for the connection process
Step 8:Set administrator passwordPlease note:there is no default administrator password,please keep your own password in mind,if you forget it,you have to set up the device again.
Set your password
Step 9:Name the device
Step 10:Set up successfully
The Second Method
Step 1:Download App:ToSee
Download the “ToSee” App from Apple Store or Google Play.
Please ensure to allow location access to "TOSEE" App,otherwise you may be troubled in selecting your WiFi network in the next steps.
Add a device
Step 3:Power on the camera and reset the camera, you can see the camera is flashing red if you reset it successfully,otherwise reset again.
Step 4:Click “The Red Light is Flashing” when the device red light flashing
Step 2:Open the App,click “+” and “Add a device”
Step 5:Click “ Enter the Configuration Interface”
Step 6:Choose WiFi hotspot like “TOSEE_XXXX” and then connect it
step 7:Get back to "TOSEE" app and click "NEXT" to continue
Step 8:Find your network(2.4G only) and input password and click “NEXT”
Step 9:Set your administrator password and click “NEXT”Please note:there is no default administrator password,please keep your own password in mind,if you forget it,you have to set up the device again.
Set your password
Step 10:Name your device and click “Complete”
Step 11:Set up successfully
How to share your device?Step 1:Open “TooSee” app,click your device and enter “live steam” mode
Step 2:Click “ ”
Step 3:Input administrator password and click “Confirm”
Step 4:Click the “ ”
Step 5:Name the new user,and click the “Confirm”
+
Step 6:App generates a shared QR code
+Step 7:New users open the App,click “ ” and “Scan QR Code” to scan the QR code generated in the first user App.After scanning,return to the main interface of the App,click the device interface to wake it up, if it shows image means added successfully
Please note:One device supports 8 users connection,allows maximum 3 users view live video simultaneously.
App function introduction
1.Enable/disable low power consumption2.Device indicator on/off3.Night vision infrared light on/off4.Image flip on/off5.Low battery reminder on/off6.Set video length:closed,15s,30s,45s, permanent video7.Adjust Motion detection sensitivity: low -high8.Adjust intercom volume9.Anti-flicker setting:recommend remain closed10.Information for storage11.Information for available storage12.Format SD card13.Show device information
1.Control the scene volume2.Playback recorded videos3.Image effect configuration4.Full screen view5.Screenshot button6.Talk to visitor7.Tap to record on smart phone8.Share the device to other users 9.Setting menu10.Back to device list11.Battery charging icon (Low battery alert : )
9
10111213
Q:What kind of SD card should be used?A:Micro SD card,C10 class,8-128GB.
Q:Why the battery only lasts several days or weeks?A:(1)View live video too often. (2)The device is triggered too frequently because it is not fixed in a appropriate. (3)WiFi signal is too weak.
Q:Why I can’t see playback video?A:Please format the Micro SD card(C10 speed) and try again.
Q:Why I can’t connect the camera?A:(1)5G WiFi,not 2.4G WiFi. (2)WiFi signal is too weak,please make sure your phone, WiFi router,camera within 3 meters when set up. (3)Not reset the device successfully,please make sure you can see the flashing red light after reset. (4)Low battery.please charge the device for 12 hours.
Q:Why I can’t see live video remotely?A:Because your setup is not success,after setup,try to use cellular signal to view live video to test whether your setup is success or not.
Q:Why I can’t receive push alarm?A:(1)Your cell phone should allow the “TOSEE” app to push notification. (2)Adjust motion detection sensitivity on the app. (3)“Tosee” App:General--turn on “push message”
FAQ
Q:When charge it,why I can’t see the led indicator?A:There is no indicator led for charging,when charge it, make sure the cable is ok.you can see the battery status only on the “TOSEE” App when your phone is connected to the camera.
Q:Is the charger included?A:Battery charger is not included,you can charge the battery with DC5V,1A-2A adapters(same as the charger for most Android smart phones) through the Micro USB port at the bottom side of the device.
Q:Can I have 2 cameras (for front and black) at the same residence?A:Yes,you can add as many devices as you like. Please note:One device supports 8 users connection, allows maximum 3 users view live video simultaneously.
Q:What happens when the SD card is full?A:When the memory card is full,the device will erase the oldest footage.
Emai: [email protected]