Guide Book

The 4th International Conference on Small Sample Test Techniques

4th International Conference on

Small Sample Test

Techniques 12nd-14th October 2016

MATERIÁLOVÝ A METALURGICKÝ

VÝZKUM s.r.o.

MATERIÁLOVÝ A METALURGICKÝ

VÝZKUM s.r.o.

Binan Shou (China) Chairman of the Conference

Karel Matocha (Czech) Co-Chairman of the Conference

Kaishu Guan (China) Executive chairman of the Conference

INTERNATIONAL STEERING COMMITTEE

Roger Hurst (UK) Chairman Martin Abendroth (Germany)

Michail Sokolov (USA) Raghu Prakash (India)

Shin-ichi Komazaki (Japan) Kaishu Guan (China)

4th International Conference SSTT 2016 Determination of Mechanical Properties of Materials by Small Punch

and other Miniature Testing Techniques Shanghai, October 12 to 14, 2016

FINAL PROGRAMME

VENUE: Building Yifu, East China University of Science and Technology

Theme 1: Small Punch Testing For Tensile And Fracture Behaviour Theme 2: Small Punch Creep Testing Theme 3: Small Sample Test Technique Theme 4: Other Miniature Test Techniques

REGISTRATION Wednesday October 12, 2016 10:00-18:00 Thursday October 13,2016 8:30-18:00

Thursday October 13-Friday October 14, 2016

8:30-18:00 Conference Sessions

October 13, 2016 8:00 Bus from Grand skylight Gardens hotel to ECUST

8:30 – 9:00 OPENING CEREMONY

PLENARY SESSION Chairman of the Session : R. J. Lancaster (UK)

9:00-9:25 Shou Binan (China) Development of Hydraulic Bulge Testing Techniques

9:25-9:50 Roger Hurst, Karel Matocha (United Kingdom, Czech) Small Punch Testing – the transition from a Code of Practice to a European testing standard

9:50-10:15 Shan-Tung Tu (China)) Transferability of Mechanical Properties from Small Specimen Testing to Engineering Structure at High Temperature

10:15-10:30 COFFEE BREAK

10:30-11:00 M. A. Sokolov (USA) Use of Small Compact Tension Specimen for Fracture Toughness Evaluation of RPV Steels

11:00-11:30 Martin Abendroth (Germany) FEM Analysis of Small Punch Tests

11:30-12:00 G.A.Jackson,D.G.McCartney,W.Sun (GB) The High Temperature Creep Properties of a Thermally Sprayed CoNiCrAIY Coating via Small Punch Creep Testing

12:00-13:00 LUNCH BREAK

October 13, 2016 Theme 1 Chairman of the Session : Karel Matocha (Czech) Room 1

13:00-13:20 H.W. Illsley, R.J. Lancaster, R.C.Hurst, S.P.Jeffs, G. Baxter (GB) Mechanical property Characterisation of electron Beam Melted (EBM) Ti-6Al-4V via Small Punch Tensile Testing

13:20-13:40 Y. Matsumoto, H. Yukawa, T. Nambu (Japan) Evaluation of Ductile-to-Brittle transition for Tantalum in hydrogen Environment by Small Punch Test

13:40-14:00 R. J. Lancaster, H.W.Illsley, R. C. Hurst, S.P. Jeffs, G. Baxter (GB) A Novel Approach to Small Punch Fatigue Testing

14:00-14:20 COFFEE BREAK 14:20-14:40 K. Guan (China) Development and standardization of small punch testing techniques in China

14:40-15:00 P. Dymáček, F. Dobeš, L. Kloc (Czech Republic) Small Punch Testing of Sanicro 25 Steel and its correlation with uniaxial tests

15:00-15:20 R.Lacalle, D.Andrés, B.Arroyo, J.A.Alvarez, D.Ferreňo, F.Gutiérrez-Solana(Spain) Transition Region of Nuclear vessel Steels: Master Curve Approach Using Notched Small Punch Specimens

15:20-15:40 J. Petzová, M. Březina, M. Baľák, Ľ. Kupča (Slovakia) Application of Small Punch Testing Methods for Thermal Ageing Evaluation on Samples from Primary Piping of NPP

15:40 -16:00 COFFEE BREAK

October 13, 2016

Theme 1: Chairman of the Session : Shou Binan (China) Room 1

16:00-16:20 R. Kopřiva, I. Eliasova, J. Stefan, M. Falcník, M. Kytka (Czech Republic) Innovative Approach of Small Punch Testing and Automated Ball Indentation in the Process of Irradiated Nuclear Power Plant Structural Materials Degradation Evaluation

16:20-16:40 M. Song, N. P. Gurao, K. Guan, J. A. Szpunar (China) Effects of textures of unidirectional and multi-step cross rollings on AISI 316L austenitic stainless steel by means of small punch test

16:40-17:00 K. Matocha, O. Dorazil, R.Hurst (Czech Republic, United Kingdom) The Present SP Tests for Determining the Transition Temperature TSP on „U“ notch disc specimens

17:00-17:20 S. Davies, R. Lancaster, S. Jeffs, G. Baxter Small Punch Testing of Powder Bed Direct Laser Deposits

17:20-17:40 R. Jojima, S. Komazaki, T. Matsuoka, K. Kubushiro, D. Abe (Japan) Local Strength Evaluation of Weld-Overlay Cladding by Small Punch Tests

17:40-18:00 Bo Zhao (China) Study on Small Punch Test to Characterize the Mechanical Property of Aged High-Density Polyethylene (HDPE).

Theme 3: Chairman of the Session : Mikhail Sokolov (USA) Room 2

13:00-13:20 Zhai Jianguang (China) Numerical analysis of plastic constraint in small specimens for cleavage fracture

13:20-13:40 M. Adendroth, H. Zielke (Germany) Determination of fracture and damage mechanical properties of ceramic filter materials using miniaturized specimens

October 13, 2016

Theme 3 Chairman of the Session : Mikhail Sokolov (USA) Room 2

13:40-14:00 J. Xin, S. Liu, Q. Huang and FDS Team (China) Influence of sample size on the neutron irradiation properties of CLAM steel

14:20-14:40 J.Liang, Ch. Zhou, B. Wang (China) Study on high temperature creep of P92 material based on the minimally invasive technique

14:40-15:00 C.J.Hyde (GB) Small Ring Testing of High Temperature Materials

15:00-15:20 F. Qi (China) Research on Fatigue Properties of Micron Scale Copper Bonding Wires

15:20-15:40T. Sugimoto, T. Itoh, M. Sakane (Japan) Development of Fatigue Testing machine for Small sized specimen in Liquid Conditions

15:40 -16:00 COFFEE BREAK

16:00-16:20 Y. Konishi, T. Itoh, M. Sakane, F. Ogawa, H. Kanayama (Japan) Low cycle Fatigue Test of Lead Free Solders Using Small Sized specimens

16:20-16:40 S. Yao (China) Strain Correction in Small Specimen Tensile Test without Extensometer

16:40-17:00 Z. Xia, J. Chen (Canada) An Alternative Method for Strain- controlled Fatique Test at Elevated temperature

October 13, 2016

17:00-17:20 Z. Jin, J. Zhao (China) A New Method to Extract the Plastic Properties of Metal Materials from A Continuous Spherical Indentation Test

18:30 RECEPTION

October 14, 2016

Theme 2 Chairman of the Session : Roger Hurst (UK) Room 1

8:30-8:50 D. Omacht, Z. Kubánek, R. Doležal (Czech republic) Development of Testing Machines and Equipment for Small Punch Testing, Proposals for Improvement of CWA 156

8:50-9:10 S. Komazaki, Y. Ohkawa, M.Yonemura (Japan) Effect of Ductility on Small Punch Creep Property of Ni-Base Alloys

9:10-9:30 D. Andrés, P. Dymáček, R. Lacalle, J. A. Alvarez (Spain, Czech Rep.) Influence of different factors on the Small Punch Creep test

9:30-9:50 S. P. Jeffs, R. J. Lancaster, S. Davies (GB) Effect of build orientation and post processing of a DirectLaser Deposited Nickel Superalloy as determined by the Small Punch Creep Test

9:50-10.20 COFFEE BREAK

10:20-10:40 Naveena, S. Komazaki (Japan) Effect of Specimen Size on Small Punch Creep Behaviour of High Cr Ferritic Heat Resistant Steels

10:40-11:00 P. Dobeš, P. Dymáček (Czech Republic) Estimation of Anisotropy of Creep Properties in Al and Mg Alloys by Means of Small Punch Test

11:00-11:20 Y.Li, J. Geng, D. Ma, L. Xu (Netherlands, China) Determination of creep properties from small punch test with reverse algorithm

11:20-11:40 G.A.Jackson,D.G.McCartney, W.Sun The Application of the Small Punch Tensile Test to Evaluate the Ductile to Brittle Transition of a Thermally Sprayed NiCoCrAlY Coating

11:40-12:00 Arturo Ortiz-Mariscal, Maribel Saucedo-Munoz, Shin-ichi Komazaki Creep properties measurement of aged 5Cr-0.5Mo steel by Small Punch Test

Theme 4 Chairman of the Session: Martin Adendroth (Germany) Room 2

8:30-8:50 A. Takita, K.Sasaki, K. Ohguchi, H. Fujiki (Japan) Evaluation of Creep deformation by indentation Test with a Constant depth-Applicability for Inhomogeneous materials

8:50-9:10 J.Lu, A.Campbell-Brown, Shan-Tung Tu, W.Sun (UK, China) Determination of creep damage properties from a miniature three point bending specimen using an inverse approach

9:10-9:30 Y. Li, P. Stevens, M. Sun, Ch. Zhang, W. Wang (Netherlands, China) Improvement of predicting mechanical properties from spherical indentation test

9:30-9:50 R. V. Prakash (India) Study of fatigue properties of materials through Cyclic Automated Ball Indentation and Cyclic Small Punch test Methods

9:50-10:20 COFFEE BREAK

10:20-10:40 H. Zhao, G. Cheng (China) Surface Defect Inspection of Pressure Equipment Based on Indentation and Numerical Simulation

10:40-11:00 C. Wen, T. Xu, K. Guan (China) Correlation Factor Study of small punch creep test and its life prediction

11:00-11:20 D. Rao, Y. Shen (China) Mechanical behaviour evaluation of an arc welded nickel-aluminium bronze alloy with micro indentation method

11:20-11:40 M. Sun, Ch. Zhang, Ch. Yang, D. Han (China) Verification and calibration of instrumented indentation testing machine

11:40 – 12:00 Wang Yan, Yang Shanglei, Jiang Yishuai, Yang Zhihua Low-cycle Fatigue Behaviour of 6061 Aluminum Alloy Used in Astronautic Industries

12:40 – 13:40 LUNCH

14:30 – 15:30 FINAL DISCUSSION AND CONCLUSIONS

18:00 DINNER

News media is supported by Journals: Materials for Mechanical Engineering and Physical Testing and Chemical Analysis Part A Physical Testing (机械工程材料,理化检验物理分册) http://www.mdpi.com/journal/materials

Publication and full paper submission deadline

Proceedings will be published in full text in a periodical KEM (Key Engineering Materials) by TTP Ltd. ( www.ttp.net ) after they have been accepted by the Publisher’s Internal Review Process .Index related (more detailed) information you can find following the link on www.scientific.net (by Trans Tech Publications Ltd.).

We are pleased to announce that Materials (http://www.mdpi.com/journal/materials) will be publishing several excellent papers presented at the SSTT2016 conference in a special issue of the journal. It is envisaged that a paper should showcase the diversity and innovative nature of the research that is currently developing across the world on small scale test techniques.

Q&A Which parties are to hold this conference ?

1. East China University of Science and Technology,

2. China Special Equipment Inspection and Research Institute,

3. Chinese Mechanical Engineering Society 4. Material and Metallurgical Research Ltd,

Czech Republic 5. Technical University of Ostrava

When will the conference be held?

The 4th International Conference on Small Sample Test Technique will be held in Shanghai China on 12nd-14th, October 2016.

Hotel Location Conference Location

• 4 Star Hotel • (Recommended) No. 100 Baise Road (百色路100号), Xuhui district, Shanghai 2 kilometers from the conference location at ECUST(within 2Km, 20Minutes by walk) Meals, Banquets and Registration will be in GRAND SKYLIGHT HOTEL

Building Yifu (逸夫楼),East China University of Science and Technology (ECUST), 130 Meilong Rd., Xuhui Dist., Shanghai, China. A shuttle bus will be provided to commute from Building Yifu to the GRAND SKYLIGHT hotel during the meeting period.

Urban Transport Means of Transport:

Taxi：45Km, 50Min, 140CNY Pudong airport>>>East China University of Science and Technology(Grand Skylight Gardens Hotel )

Public bus:1hr 40Min,20CNY Pudong airport>>>Shanghai south railway station. Airport 7th line bus

Public Transport A: 80CNY,1Hr 10Min Pudong> Maglev train>Longyang Rd> Metro Line2> People’s Square>Metro Line 1 > Shanghai south railway station

The campus is about 1.7 Km from the Metro station (Shanghai south railway station).

Map

Conference Location

The specific Building where of the conference will be hold is Yifu Building(逸夫楼) inside the campus of East China University of Science and Technology.

Accommodation and Registration Booking hotel Hotel Information

Help will be provided for delegates in terms of hotel booking. Complete the registration by filling the form in the attached word profile “Accommodation Registration” and send it back to :guankaishu@ecust.edu.cn

Grand Skylight Gardens Hotel Grand Skylight Gardens Hotel

Registration

Location: Grand Skylight Gardens Hotel on 12 October or the at conference (Yifu Building) on 13 October.

Registration fee will be 500 USD, Extra charge for relative companion with the attendance : 150 USD Students are welcomed with a reduced registration fee of 200 USD.

Registration fee is required to be paid on site (only in cash) or by transferring to the bank account: 上海峰加化工科技有限公司 (Shanghai Fengjia Chemical technology Co.Ltd) Bank account ：03002879898

Extra Information for Bank Transfer: 1、English Name of the Bank：BANK OF SHANGHAI; 2、Swift Code:BOSHCNSH; 3、Account:319017-03002879898.