tfl supplementary signs standard - transport for...
TRANSCRIPT
Transport for London
MAYOR OF LONDON Transport for London
Supplementary signs standardIssue 3
Contents
General safety signs 1.1 CCTV 1.2 Priority seat 1.3 Priority seat: Seat mounted 1.4 End-of-platform warning1.5 End-of-platform warning : Narrow 1.6 Escalator warning 1.7 Emergency train-stop plunger 1.8 Induction loop 1.9 Fast trains warning 1.10 CCTV monitor label
Safe condition signs
2.1 First aid 2.2 Stretcher 2.3 Wheelchair emergency procedure
Prohibition signs
3.1 No smoking 3.2 No begging 3.3 No busking 3.4 No entry - large format 3.5 No fl ash photography 3.6 No skating3.7 No smoking / CCTV combined3.8 Drinking Control Zone
Fire safety signs
4.1 Fire point 4.2 Rendezvous point 4.3 Staff assembly point
Security signs
5.1 Fire call point 5.2 Help point: Sub-surface 5.3 Help point: Sub-surface directional 5.4 Help point: Surface stations 5.5 Help point: Surface stations directional 5.6 Combined Help point/waiting room 5.7 Help point: Sub-surface instructional 5.8 Help point: Surface stations instructional
Ticketing signs
6.1 Penalty fares 6.2 Oyster Card reader: Identifi cation 6.3 Oyster Card reader: Instructional
Forecourt signs
7.1 Cycle parking: Standard 7.2 Cycle parking: Directional 7.3 No parking: Standard 7.4 No parking : Permit holders7.5 No parking: Emergency vehicles7.6 No parking: Gates in constant use7.7 Cycles will be removed
1.1 CCTV sign for station areas
Material
Flat vitreous enamel.
Do not scale
Digital fi le available from TfL Signs Unit.
Contents
19mm cap
160mmWordingdependenton mode
10mm cap
4mm external rad2mm white borders
300mm
White symbol onCorporate Blue
Full colour Mode logo
Roundel useddependenton mode.
Position
CCTV signs are required in order to comply with the Data Protection and Freedom of Information Acts. They should be fi xed in the following key locations:
• on interchange concourses a single sign should be fi tted facing each entry point.• on platforms, they should be fi tted on either side of each main entry/exit point to/from the platform.
For CCTV signs at station entrances, the combined CCTV/No smoking version should be used—refer to sheet 3.7.Where additional signs are seen as a requirement, eg. due to high crime levels, care should be taken not to use too many signs, as this may lead to the area appearing hostile and increase customer anxiety.CCTV signs should not be fi xed at every camera point.
1.2 Priority seat sign
Material
Flat vitreous enamel.
Do not scale
Digital fi le available from TfL Signs Unit.
Position Priority seat signs should be fi tted above designated priority seats which should make up 20% of platform seating.
Signs are to be centred over seat at a height of 1500mm to bottom edge. Where seating is in open areas, and there is no surface for fi xing a sign above the seat, the smaller seat mounted version may be used as detailed on page 1.3.
Priority seats should be evenly distributed throughout station ticket halls, routeways and platforms, including waiting rooms.
Contents
White on Safety Blue
2mm white borders
14mm cap
8.5mm cap
4mm external rad
200mm
250mm
1.3 Priority seat sign – Seat mounted
Material
Flat vitreous enamel.
Do not scale
Digital fi le available from TfL Signs Unit.
Contents
White onSafety Blue
2mm white borders
9.5mm cap
6mm cap
4mm external rad
175mm
45mm
Note:
This sign may only be used where there is no surface
above the seat to affi x a standard Priority Seat Sign.
Care must be taken to ensure sign is securely fi xed
and cannot catch on customers clothing.
1.4 End-of-platform warning sign
Material
Flanged vitreous enamel panels with modifi ed fl anges to suit standard end-of-platform barriers.
Do not scale
Digital fi le available from TfL Signs Unit.
Position Sign should be fi tted in accordance with relevant mode standards.
Contents
72.5mm ext. rad.
Black on textSafety Yellow
Black symbol and border on Safety Yellow
White text on Safety Blue
White symbol on Safety Blue circle
White text on Safety Red
Black symbol on white with Safety Redring and bar
Black textSafety Yellow
Black symbol and border on Safety Yellow
160mm wide symbols
35mm cap
25mm cap
25mm cap
35mm cap
25mm cap
17mm cap
25mm cap
997mm
471mm
6mm white borderbetween blocks
8mm white borderaround edges
1.5 End-of-platform warning sign – Narrow version
Material
Flanged vitreous enamel panels with modifi ed fl anges to suit standard end-of-platform barriers.
Do not scale
Digital fi le available from TfL Signs Unit.
Position Sign should be fi tted in accordance with relevant mode standards.
Contents
14mm cap
11mm cap15mm cap
15mm cap
15mm cap
25mm cap
997mm
174mm72.5mm ext. rad
White text onSafety Blue
White symbol on
Safety Blue circle
White text on Safety Red
Black symbol on white withSafety redring and bar
8mm white borderaround edges
Black text Safety Yellow
Black symbol andborder on Safety Yellow
107mm wide symbols
25mm cap
1.6 Escalator warning sign
Material
Flanged vitreous enamel.
Do not scale
Digital fi le available from TfL Signs Unit.
Position Sign should be fi tted in accordance with relevant mode standards.
Contents
10mm external rad
White on Safety Red
White on Safety Blue
White on Safety Blue
26mm cap
26mm cap
45mm cap
940mm
450mm
5mm white borders
26mm cap
26mm cap
1.7 Emergency train stop plunger sign
Material
Flanged vitreous enamel.
Do not scale
Digital fi le available from TfL Signs Unit.
Position Sign should be fi tted in accordance with relevant mode standards.
Contents
White onSafety Red
160mm
White on Corporate Dark Blue
4mm external rad2mm white borders
110mm
9mm cap
9mm cap
12.5mm cap
1.8 Induction loop sign
Material
Flanged vitreous enamel panels with modifi ed fl anges to suit standard end-of-platform barriers.
Do not scale
Digital fi le available from TfL Signs Unit.
Position Sign should be fi tted in accordance with relevant mode standards.
Contents
White symbol and stripe on Corporate Magenta
95mm
2mm white borders
4mm external rad95mm
1.9 Fast trains – warning sign
Material
Flanged vitreous enamel panels with modifi ed fl anges to suit standard end-of-platform barriers.
Do not scale
Digital fi le available from TfL Signs Unit.
Position Sign should be fi tted in accordance with relevant mode standards, in positions requested by station management.
Contents
Black symbol andborder, Safety yellow triangle
Black letters on Safety Yellow
20mm cap
100mm
12mm cap
4mm external rad2mm white borders
250mm
1.10 CCTV label for monitors
Material
Flat vitreous enamel.
Do not scale
Digital fi le available from TfL Signs Unit.
Position Sign should be fi tted in accordance with relevant mode standards.
Contents
40mm
4mm external rad2mm white borders
300mm
White letters on Corporate Dark Blue
8mm cap
Wording dependenton mode.
2.1 First aid sign
Material
Flat vitreous enamel.
Do not scale
Digital fi le available from TfL Signs Unit.
Position Sign should be fi tted in accordance with relevant mode standards.
Contents
White cross on Safety Green
2mm white borders
24mm cap
4mm external rad
175mm
250mm
2.2 Stretcher sign
Material
Flat vitreous enamel.
Do not scale
Digital fi le available from TfL Signs Unit.
Position Sign should be fi tted in accordance with relevant mode standards.
Contents
White cross on Safety Green
2mm white borders
22mm cap
4mm external rad175mm
250mm
2.3 Wheelchair user emergency procedure sign
Material
Flat vitreous enamel.
Do not scale
Digital fi le available from TfL Signs Unit.
Position Sign should be fi tted in accordance with relevant mode standards.
Contents
White on Safety Green
16mm cap
100mm
10mm cap
4mm external rad2mm white borders
Note:
Actual text may be varied to suit
specifi c situations at stations
300mm
3.1 No smoking sign
Material
Flanged vitreous enamel panels with modifi ed fl anges to suit standard end-of-platform barriers.
Do not scale
Digital fi le available from TfL Signs Unit.
Position On London Underground platforms a single No smoking sign should be positioned over alternate trackside roundel signs. On open platforms signs should either be incorporated in panel roundels, or fi xed centrally above alternate silhouette roundels outside the roundel exclusion zone. As a general rule, a platform should display a maximum of eight No Smoking signs. Where possible signs should be positioned at a height of 2m to top edge. No smoking signs must not be fi tted more frequently than prescribed above.
On all other modes No Smoking signs should be fi tted in accordance with relevant mode standards, in positions requested by station management.
Contents
Black symbolon white.Safety Redring and bar
2mm white borders
White letters on Safety red
4mm external rad
200mm
20mm cap
250mm
3.2 No begging sign – subways
Material
Flanged vitreous enamel panels with modifi ed fl anges to suit standard end-of-platform barriers.
Do not scale
Digital fi le available from TfL Signs Unit.
Position Signs should be fi tted only in problem areas identifi ed by station management.
Contents
White letters on Safety Red
34mm cap
150mm
11mm cap
8mm external rad4mm white borders450mm
Safety redring & bar on white
3.3 No busking sign – subways
Material
Flanged vitreous enamel panels with modifi ed fl anges to suit standard end-of-platform barriers.
Do not scale
Digital fi le available from TfL Signs Unit.
Position Signs should be fi tted only in problem areas identifi ed by station management.
Contents
Safety red ring & bar on white
White letters onSafety Red
34mm cap
150mm
11mm cap
8mm external rad4mm white borders450mm
3.4 No entry – Large format
Material
Flanged vitreous enamel panels with modifi ed fl anges to suit standard end-of-platform barriers.
Do not scale
Digital fi le available from TfL Signs Unit.
Position Sign should be fi tted in accordance with relevant mode standards.
Contents
Black symbol on whiteSafety red ring & bar
White letters on Safety Red
42mm cap
200mm
30mm cap
8mm external rad4mm white borders450mm
3.5 No fl ash photography
Material
Flanged vitreous enamel panels with modifi ed fl anges to suit standard end-of-platform barriers.
Do not scale
Digital fi le available from TfL Signs Unit.
Position Sign to be fi tted only in problem areas identifi ed by the premises management, such as those with high numbers of tourists, or of specifi c architectural interest.
Contents
Black symbol on whiteSafety red ring & bar
White letters on Safety Red
18mm cap
75mm
4mm external rad2mm white borders250mm
3.6 No skating sign – subways
Material
Flanged vitreous enamel panels with modifi ed fl anges to suit standard end-of-platform barriers.
Do not scale
Digital fi le available from TfL Signs Unit.
Position Signs should be fi tted only in problem areas identifi ed by the premises management.
Contents
Safety red ring & bar on white
White letters on Safety Red
125mm
25mm cap
8mm external rad4mm white borders450mm
3.7 No smoking and CCTV sign (including legal text to meet
Department of Health – Smoke free premises & vehicles regulations)
Material
Flanged vitreous enamel panels with modifi ed fl anges to suit standard end-of-platform barriers.
Do not scale
Digital fi le available from TfL Signs Unit.
Position At either side of each premises entrance, preferably orientated to face customers, or on entrance sides if there is insuffi cient space. CCTV signs are required in order to comply with the Data Protection and Freedom of Information Acts.
Contents
White letters on Corporate Blue
70mm dia. 2mm white borders
19mm cap
19mm cap
10mm cap
10mm cap
4mm external radWhite letters on Corporate Blue
300mm
White symbol on Corporate Blue
Full colour Underground logo
Roundel used dependent or mode
White symbol on Corporate Blue
Black symbol Safety Red ring & bar
250mm
Wording dependenton mode
3.8 Drinking control zone sign
Material
Flat vitreous enamel.
Do not scale
Digital fi le available from TfL Signs Unit.
Position Sign should be fi tted in accordance with relevant mode standards.
Contents
19mm cap
9mm cap
4mm external rad2mm white borders
300mm
160mm
4.1 Fire point sign – No hydrant
Material
Flat vitreous enamel.
Do not scale
Digital fi le available from TfL Signs Unit.
Position Sign should be fi tted in accordance with relevant mode standards.
Contents
White symbols on Safety red
200mm
4mm external rad2mm white borders
200mm
4.2 Rendezvous point sign
Material
Flat vitreous enamel.
Do not scale
Digital fi le available from TfL Signs Unit.
Position Sign should be fi tted in accordance with relevant mode standards.
Contents
60mm cap
Black on SafetyYellow
2mm white borders
4mm external rad
300mm
175mm
4.3 Staff assembly point sign
Material
Flat vitreous enamel.
Do not scale
Digital fi le available from TfL Signs Unit.
Position Sign should be fi tted in accordance with relevant mode standards.
Contents
60mm cap
White on Safety Green
2mm white borders
4mm external rad
300mm
175mm
5.1 Fire call point sign
Material
Flat vitreous enamel.
Do not scale
Digital fi le available from TfL Signs Unit.
Position Sign should be fi tted in accordance with relevant mode standards.
Note
This sign is to be used with stand alone fi re call points only. For Help Point signing refer to section 5.7.
Contents
250mm
250mm
50mm dia.
2mm white borders 4mm external rad
12mm cap
White text on Safety Blue
8mm cap
12mm cap
White symbol on Safety Blue
5.2 Help point sign: Sub-surface
Material
Flat vitreous enamel.
Do not scale
Digital fi le available from TfL Signs Unit.
Position Sign should be fi tted in accordance with relevant mode standards.
Contents
170mm
490mm
150 x 150mmsymbols
White symbol on Safety Red
White symbol on Safety Green
White symbol on Corporate Blue
490mm
170mm
Standard horizontal version : H1
Vertical version : H2
5.3 Help point sign: Sub-surface directional
Material
Flanged vitreous enamel panel for fi xing within aluminium trim.
Do not scale
Digital fi le available from TfL Signs Unit.
Position Sign should be fi tted in accordance with relevant mode standards.
Contents
250mm
Standard directional
version : H3490mm
Directional options
White symbol on Safety Red
White symbol on Safety Green
White symbol on Corporate Blue
150 x 150mm symbols
Typesize ECorporate Blue
5.4 Help point sign: Surface stations
Material
Flanged vitreous enamel panel for fi xing within aluminium trim.
Do not scale
Digital fi le available from TfL Signs Unit.
Position Sign should be fi tted in accordance with relevant mode standards.
Contents
Vertical version : H5
150 x 150mm symbols
White symbol on Safety Green
White symbol on Corporate Blue
170mm
170mm
330mm
330mm
Standard horizontal version : H4
5.5 Help point sign: Surface station directional
Material
Flanged vitreous enamel panel for fi xing within aluminium trim.
Do not scale
Digital fi le available from TfL Signs Unit.
Position Sign should be fi tted in accordance with relevant mode standards.
Contents
225mm
330mm
White symbol on Safety Green
White symbol on Corporate Blue
150 x 150mm symbols
Directional options
30mm cap CorporateBlue
Standard directional
version : H6
5.6 Help point sign: Outside waiting room
Material
Flanged vitreous enamel panel for fi xing within aluminium trim.
Do not scale
Digital fi le available from TfL Signs Unit.
Position Sign should be fi tted in accordance with relevant mode standards.
Contents
490mm
170mm
Typesize F Corporate Blue
White symbol on Corporate Blue
150 x 150mmsymbols
Mount from this end
Reverce face : 10mm borders
Standard waiting
room sign : H7
White symbol on Corporate Blue
5.7 Help point sign: Sub-surface instructional
Material
Flat vitreous enamel panel in accordance with TfL standards.
Do not scale
Digital fi le available from TfL Signs Unit.
Position Sign should be fi tted centrally directly above Help Point unit if not incorporated into the standard Help Point stand.
Contents
118 x 118mmsymbols
White symbol/text on Safety Red
White symbol/text on Safety Green
White symbol/text on Corporate Blue
8mm external rad
4mm white borders
370mm
6mm cap
3.5mm cap
8mm cap
210mm
5.8 Help point sign: Surface stations instructional
Material
Flat vitreous enamel panel in accordance with TfL standards.
Do not scale
Digital fi le available from TfL Signs Unit.
Position Sign should be fi tted centrally directly above Help Point unit if not incorporated into the standard Help Point stand.
Contents
210mm
4mm white borders
8mm external rad
248mm
6mm cap
4mm cap
8mm cap
118 x 118mm symbols
White symbol/text on Safety Green
White symbol/text on Corporate Blue
6.1 Penalty fares sign
Material
Flanged vitreous enamel panel for fi xing within aluminium trim, or as part of VE directional sign.
Do not scale
Digital fi le available from TfL Signs Unit.
Position Sign should be fi tted in accordance with relevant mode standards.
Contents
Standard version :
Non-grated interchange version :
White text on Corporate Blue
250mm
8mm white border to allow for fl ange5mm internal rad
750mm
Typesize E
Typesize E
26mm cap
26mm cap
6.2 Oyster card reader: Identifi cation sign
Material
Flanged aluminium panel.
Do not scale
Digital fi le available from TfL Signs Unit.
Position Sign should be fi tted in accordance with relevant mode standards.
Contents
300mm cap
155mm dia.
26mm cap
4mm white borderallowing for fl ange
200mm
White on Corporate Blue
White ticket with TfL Dark Grey shadow on Safety Yellow circle
6.3 Oyster card reader: Instruction sign
Material
Flat vitreous enamel in accordance with TfL standards
Do not scale
Digital fi le available from TfL Signs Unit.
Position Sign should be fi tted in accordance with relevant mode standards.
Contents
175mm
8mm external rad4mm white border
450mm
85mm dia.
White ticket with TfL Dark Grey shadow on Safety Yellow circle
White on Corporate Blue
32 / 16mm cap
7.1 Cycle parking
Material
Corporate Flanged vitreous enamel panel for fi xing within aluminium trim.
Do not scale
Digital fi le available from TfL Signs Unit.
Position Sign should be fi tted direcly over cycle parking facility. Preferred height 1600mm to bottom edge.
Contents
200mm
350mm
14mm cap
White P on Safety Blue square
Corporate Blue on white
7.2 Cycle parking (directional)
Material
Flanged vitreous enamel panel for fi xing within aluminium trim.
Do not scale
Digital fi le available from TfL Signs Unit.
Position Sign should be fi tted so as to be clearly visible when approaching station entrance. Preferred height 1600mm to bottom edge.
Contents
750mm
750mm
Typesize F
White P on Safety Blue square
Corporate Blue on white
7.3 No parking (standard text)
Material
Flanged vitreous enamel panel for fi xing within aluminium trim.
Do not scale
Digital fi le available from TfL Signs Unit.
Position Sign should be fi tted in accordance with relevant mode standards, in positions requested by station management.
Contents
750mm
Safety redring & bar—150mm dia.Safety Blue centres.
White text on Corporate Blue
8mm white border to allow for fl ange500mm
Typesize E
Typesize C
Safety Yellowbackground
5mm white line—5mm rad corners
7.4 No parking (Staff permit holders only)
Material
Flanged vitreous enamel panel for fi xing within aluminium trim.
Do not scale
Digital fi le available from TfL Signs Unit.
Position Sign should be fi tted in accordance with relevant mode standards, in positions requested by station management.
Contents
750mm
Safety redring & bar—150mm dia.Safety Blue centres.
White text on Corporate Blue
8mm white border to allow for fl ange500mm
Typesize E
Typesize C
Safety Yellow background
5mm whiteline—5mm rad corners
7.5 No parking (Emergency vehicles only)
Material
Flanged vitreous enamel panel for fi xing within aluminium trim.
Do not scale
Digital fi le available from TfL Signs Unit.
Position Sign should be fi tted in accordance with relevant mode standards, in positions requested by station management.
Contents
750mm
Safety redring & bar—150mm dia.Safety Blue centres.
White text on Corporate Blue
8mm white border to allow for fl ange500mm
Typesize E
Typesize C
Safety Yellow background
5mm whiteline—5mm rad corners
7.6 No parking (Gates in constant use)
Material
Flanged vitreous enamel panel for fi xing within aluminium trim.
Do not scale
Digital fi le available from TfL Signs Unit.
Position Sign should be fi tted in accordance with relevant mode standards, in positions requested by station management.
Contents
750mm
Safety redring & bar—150mm dia.Safety Blue centres.
White text on Corporate Blue
8mm white border to allow for fl ange500mm
Typesize E
Typesize C
Safety Yellow background
5mm whiteline—5mm rad corners
7.7 Cycles will be removed
Material
Flat vitreous enamel.
Do not scale
Digital fi le available from TfL Signs Unit.
Position Sign should be fi tted in accordance with relevant mode standards.
Contents
White symbol on Corporate Blue
White letters on Corporate Blue
17mm cap
140mm
4mm external rad2mm white borders
300mm
Issue 3, January 2009
© Transport for London
These standards intend to outline basic principles and therefore cannot cover every application or eventuality.
In case of difficulty or doubt as to the correctness in the application of these standards, please contact TfL Corporate Design.Telephone: 020 7126 4462 Internal extension: 64462Email: [email protected]
All TfL corporate design standards are available from the TfL internet site.tfl.gov.uk/corporatedesign
ContentsFor further information: