and Construction Related Systems

FinTech

Shutter Release

Curing

Grout

Adhesives

Bonding

Priming

Repairs

Skimming

Crack Injection

Waterproofing

Jointing

Overlays

Tiling

Coatings

Range

CONSTRUCTION PRODUCT

CONSTRUCTION PRODUCT

FinTech

Adhesives and Repair Products

Techfin Solidkote 110 Wet to dry epoxy bonding agent and primer

An epoxy adhesive resin system for bonding new concrete onto existing concrete surfaces. It is able to form a solid bond between newly laid wet concrete on to older dry prepared concrete surfaces.

Product Description Typical Applications / Use

Techfin Concrete Surface Dressing

Decorative concrete surface dressing brush applied

A fine finishing compound to give a uniform, aesthetically enhanced finish to unsightly concrete. Very economical and easy to apply without adding any material height the concrete surface.

Techfin CrackInjection

Crack injection compound (epoxy) Low viscosity crack injection resin used to inject and repair cracks varying in sizes. This includes cracks that are too fine to be filled with traditional materials.

Techfin GP Epoxy Epoxy resin tile adhesive and repair mortar

High strength general purpose epoxy paste used for filling of voids and as an adhesive to various substrates. Trowel or spatula applied.

Techfin Hi-Density Bonding Liquid

Multi purpose polymer latex for cementitious systems

Single component bonding liquid used for bonding of cementitious systems to new mortar or host concrete.

Techfin Chemical Repair Mortar

Chemical set mortar for high early strength concrete repairs

High early strength chemical mortar which, unlike concrete, is resistant to sulphate attack. For use as a concrete alternative to resist concrete attack such as in sewers, water works, live stock holding pens, dairies, abattoirs.

Techfin Structural Repair Mortar

Modified cementitious fibre repair mortar

Fibre reinforced and polymer modified cementitious mortar suitable for heavy duty repairs to concrete, aerated concrete and cementitious structures.

Fine skimming cementitious compound trowel applied

Techfin Plaster Finish

Techfin Metal Primer Cementitious resin system with enhanced alkalinity for protection of exposed steel

Cementitious resin slurry that is applied to exposed steel and rebar. The enhanced alkalinity seals and protects steel against further corrosion.

Cementitious rapid hardening plaster/fairing compound used for fine skimming of all cement based surfaces down to a featheredge.

Concrete Curing and Shutter Release Agents

Product Description Typical Applications / Use

Techfin Shutter Release OB

Shutter release oil emulsion Diesel emulsion based chemical release agent applied to mould and shutter surfaces prior to casting concrete for effective release.

Techfin Acrylic Cure Water based acrylic emulsion concrete curing compound

Economical concrete acrylic curing agent which dries to a colourless, stain-free surface finish when applied to the concrete.

Techfin Acrylic Cure White

Water based acrylic emulsion concrete curing compound white

White curing compound used to reflect light and more effectively retains moisture in freshly cast concrete. It assists to minimize initial shrinkage crack development. The concrete surfaces therefore have a harder, dust free surface whilst hairline cracks are reduced to a minimum.

Techfin Resin Cure Petroleum resin based concrete curing compound

Resin based concrete curing agent which is more effective than acrylic curing compounds in retaining moisture in freshly cast concrete. This curing agent will need to be removed prior to application of coatings to the concrete surface.

Techfin Resin Cure White

Petroleum resin based concrete curing compound white

Resin based concrete curing agent used to reflect light and more effectively retains moisture in the freshly cast concrete. This curing agent will need to be removed prior to application of coatings to the concrete surface.

Construction Grouting

Product Description Typical Applications / Use

Techfin Bulked Grout Cementitious non-shrink high early strength non-pourable grout for bulking

Non shrink, high early strength cement based grout used to fill and bulk out areas required for heavy duty support. More economical for large volume bulking.

Techfin Flowable Grout

Techfin GP Grout

Cementitious non-shrink high early strength fluid grout

Flowable non-shrink high early strength cement based grout that provides precision support for areas that require a fluid grout filler such as under machine base plates, sole plates, crane and transporter rails, stanchions and column bases, anchor bolts, turbines, pump, generators, precast units and bridge bearings.

Cementitious non-shrink high early strength workable general purpose grout

Pourable general purpose non-shrink high early strength cement based grout. Easy to work with due to its pourable but non fluid consistency. Used to fill and bulk where fluid or bulking grout is not practical and often used as a general purpose grout for both instances.

Construction Floor Systems

Product Description Typical Applications / Use

Techfin Concrete Densifier

Techfin Concrete Dry Shake

Techfin Industrial Overlay

Sodium silicate sealer

Natural and colour aggregate concrete floor hardener

High cement content pigmented and natural concrete additive used to harden the surface of freshly cast concrete. Apply to the wet concrete to give a decorative, mottled hard finish.

Concrete surface densifier used to harden and strengthen concrete surfaces.

Industrial overlay system including quartz aggregate combined with blended cements to achieve controlled setting and workability characteristics. High early strength and high ultimate strength non-shrink screed topping.

Cementitious high early strength screed overlay

FinTech

Techfin Pourable GP Epoxy

Pourable epoxy grout and gap filler

High strength, low viscosity self-levelling Epoxy grout used for rail chairs, machine bases, bridge and structural bearing pads and floor bolts, holding down bolts.

Techfin Smooth & Patch

Universal floor smoothing and patching compound

A polymer reinforced self-smoothing versatile floor patching and levelling screed. For use in both floor repairs and preparation, and final screed finishes.

Waterproofing Products

Product Description Typical Applications / Use

Techfin Hydrakote

Techfin Waterguard Two component cementitious block brush applied water barrier system for concrete, cementitious and masonry substrates.

Cementitious surface water barrier system

Techfin Waterstop Quick setting cement compoundto stop flowing water

Techfin Bitumen MB Heavy duty bituminous coating TECHFIN BITUMEN MB is used as a vapour barrier between brick and block work skins in exterior double skin walling construction. It is also used to protect the steel in concrete which is to be backfilled.

Fast setting cementitious grout used for the sealing off of flowing water in concrete structures.

Construction Tiling Products

Product Description Typical Applications / Use

Techfin GP Epoxy Epoxy resin tile adhesive and repair mortar

Thixotropic solvent-free epoxy putty with excellent gap filling properties, a medium working life and a rapid practical cure. Offers excellent strength, waterproofing and adheres inseparably to suitable substrate surfaces.

Techfin Tile Grout NJ Epoxy

Narrow joint epoxy tile grout An epoxy tile grout for resistance to chemical attack in abattoirs, dairies, fruit juice producers, wineries etc. For use in narrow joints less than 5mm for walls and floors. May also be used in wide joints greater than 5mm.

Techfin Tile Grout WJ Epoxy

Wide joint epoxy tile grout An epoxy tile grout for resistance to chemical attack in abattoirs, dairies, fruit juice producers, wineries etc. For use in wide joints greater than 5mm for walls and floors.

Techfin Tile Bond Bonding additive for tile adhesive Bonding agent, replacing the mixing water when using cement based TILE ADHESIVES and TILE GROUTS in areas where the tiling is to be subjected to very wet conditions or where tiling is to be done onto smooth or ”difficult” surfaces.

This keying agent for concrete can also be used to prime gypsum plastered surfaces and to prepare a bonding slurry for tiling onto previously painted and very smooth surfaces.

Techfin Tile Primer Keying agent for tiling on to smooth surfaces

Driven by TechnologyTechnical Finishes (Pty) Ltd manufacture a wide range of construction related products, using International Technology. Our factories in Western Cape and Gauteng are certified as SABS ISO 9001:2008 Quality Management System facilities and are committed to the development of local expertise.

Flexible crack bridging waterproof coating

Flexible waterproof coating for bridging cracks and providing a waterproofing membrane on concrete and masonry substrates.

Techfin Prodox Single component, cementitious trowel or block brush applied waterproofing system. Available in a range of colours.

Two component, cementitious polymer modified trowel / sprayable lining system

Smooth and patch special is a modified plaster used for dams, reservoir and canals linings. It is highly versatile and can be used as a waterproof plastering system.

Techfin Smooth and Patch Special

Versatile decorative waterproofing system for walls, floors and other masonary or concrete substrates. This system offers excellent flexibility and adhesion properties.