textile processing - kongunadu arts and science college
TRANSCRIPT
![Page 1: Textile processing - Kongunadu Arts and Science College](https://reader030.vdocuments.us/reader030/viewer/2022012803/61bd248061276e740b0fcb17/html5/thumbnails/1.jpg)
PREPARED BY
SHEEBA.C
ASSISTANT PROFESSOR ,
DEPARTMENT OF COSTUME DESIGN AND FASHION
TEXTILE PROCESSING
![Page 2: Textile processing - Kongunadu Arts and Science College](https://reader030.vdocuments.us/reader030/viewer/2022012803/61bd248061276e740b0fcb17/html5/thumbnails/2.jpg)
TEXTILE FINISHES
Textile finishes refer to a finishing
treatment given to a fiber, yarn, fabric
either before or after fabrication to
improve its physical appearance,
functionally, hand , drape, and easy
care features.
![Page 3: Textile processing - Kongunadu Arts and Science College](https://reader030.vdocuments.us/reader030/viewer/2022012803/61bd248061276e740b0fcb17/html5/thumbnails/3.jpg)
APPLICATION OF TEXTILE FINISHES
1.Water bath finish
▪ It is one of the main application method for
year.
▪ Inexpensive, and readily available solvent.
▪ In this method , the chemical was dissolved
in water and applied on to the fabric by
immersion and squeezing out the extra.
![Page 4: Textile processing - Kongunadu Arts and Science College](https://reader030.vdocuments.us/reader030/viewer/2022012803/61bd248061276e740b0fcb17/html5/thumbnails/4.jpg)
APPLICATION OF FINISHES
2.Foam finishes
▪ Foam finishing saves water and energy.
▪ This method utilize foam instead of a liquid
to apply the finish.
▪ Foam is made up of a mixture of air and
liquid and therefore a small amount of
liquid is used and absorbed by the fabric.
![Page 5: Textile processing - Kongunadu Arts and Science College](https://reader030.vdocuments.us/reader030/viewer/2022012803/61bd248061276e740b0fcb17/html5/thumbnails/5.jpg)
APPLICATION OF FINISHES
3.Solvent finish
▪ Solvent finishing was developed to reduce
water pollution and lower energy costs.
▪ In this process , the finishing chemical is
mixed in a solvent.
These finishes can be applied in open width
or rope form.
![Page 6: Textile processing - Kongunadu Arts and Science College](https://reader030.vdocuments.us/reader030/viewer/2022012803/61bd248061276e740b0fcb17/html5/thumbnails/6.jpg)
CLASSIFICATION OF FINISHES
Finishes can be classified as based on,
• Types of finish: preparatory finishes, aesthetic finishes, and functional finishes
• Process of finishing : Chemical finishes and mechanical finishes
• Durability of finishes : Permanent finishes, durable finishes, semi-durable finishes and temporary finishes
![Page 7: Textile processing - Kongunadu Arts and Science College](https://reader030.vdocuments.us/reader030/viewer/2022012803/61bd248061276e740b0fcb17/html5/thumbnails/7.jpg)
1.PREPARATORY FINISHES
The preparatory finishes are applied to
fabrics to make them suitable for dyeing,
printing, and further finishing processes.
▪ Desizing:
Desizing is a process of removal of sizes
starches and other substances applied to
the yarns before the process of weaving.
![Page 8: Textile processing - Kongunadu Arts and Science College](https://reader030.vdocuments.us/reader030/viewer/2022012803/61bd248061276e740b0fcb17/html5/thumbnails/8.jpg)
PREPARATORY FINISHES
▪ Singing
The process of singeing involves the
burning of fiber ends projecting from the
fabric by using one or more gas flames.
This process helps in making the fabric
smoother and finer.
![Page 9: Textile processing - Kongunadu Arts and Science College](https://reader030.vdocuments.us/reader030/viewer/2022012803/61bd248061276e740b0fcb17/html5/thumbnails/9.jpg)
PREPARATORY FINISHES
▪ Souring
Souring is carried out to remove natural or
applied impurities from the fabric before
further finishing operations and dyeing.
The impurities could be in the form of oils,
starches, natural waxes, soil, and color
tints.
![Page 10: Textile processing - Kongunadu Arts and Science College](https://reader030.vdocuments.us/reader030/viewer/2022012803/61bd248061276e740b0fcb17/html5/thumbnails/10.jpg)
PREPARATORY FINISHES
▪ Bleaching
Bleaching is carried out to remove the
natural color and hydrophobic impurities of
the fiber and make it white in color.
It is done on fibers, yarns or fabrics. Most
bleaches, such as hydrogen peroxide are
oxidizing agents and the action is carried out
by the active oxygen present in them.
![Page 11: Textile processing - Kongunadu Arts and Science College](https://reader030.vdocuments.us/reader030/viewer/2022012803/61bd248061276e740b0fcb17/html5/thumbnails/11.jpg)
PREPARATORY FINISHES
▪ Mercerizing:
Cellulosic yarns or fabrics undergo the
mercerization treatment to increase their
strength, luster, softness and affinity for
dyes and water- borne finishes due to
swelling of the fibers.
![Page 12: Textile processing - Kongunadu Arts and Science College](https://reader030.vdocuments.us/reader030/viewer/2022012803/61bd248061276e740b0fcb17/html5/thumbnails/12.jpg)
PREPARATORY FINISHES
▪ Sizing
Sizing finish provides stiffness, weight and
body to the fabric.
Water-soluble sizing is temporary, while
rein-based sizing is permanent.
During the process, the fabric is immersed
in a mixture of waxes, oils, glycerin and
softeners in adequate quantity. Talc, clay or
chalk is used to add weight to the fabric.
![Page 13: Textile processing - Kongunadu Arts and Science College](https://reader030.vdocuments.us/reader030/viewer/2022012803/61bd248061276e740b0fcb17/html5/thumbnails/13.jpg)
PREPARATORY FINISHES
Calendering involves a pressing process in
which a fabric is passed between heavy
rollers to make it smooth and glossy, it is a
mechanical finish and the process is not
permanent and needs to be repeated after
each laundering.
![Page 14: Textile processing - Kongunadu Arts and Science College](https://reader030.vdocuments.us/reader030/viewer/2022012803/61bd248061276e740b0fcb17/html5/thumbnails/14.jpg)
2.AESTHETIC FINISHES
Aesthetic Finishes are applied to fabrics tochange their appearance and hand. Theycreate and applied design on the alreadyconstructed fabric and are therefore quickerand less expensive to produce than fabricswith structural designs, that is, designsincorporated during fabric construction , suchas dobby and jacquard patterns, in woven'sand knits.
![Page 15: Textile processing - Kongunadu Arts and Science College](https://reader030.vdocuments.us/reader030/viewer/2022012803/61bd248061276e740b0fcb17/html5/thumbnails/15.jpg)
AESTHETIC FINISHES
▪ Luster Finishes
Luster finishes are applied to improve the
fabric luster. They act by changing the light
reflectance of a fabric. These finishes are
applied by calendering, in which the fabric
passes between two cylinders, which exert
pressure to apply the finish.
![Page 16: Textile processing - Kongunadu Arts and Science College](https://reader030.vdocuments.us/reader030/viewer/2022012803/61bd248061276e740b0fcb17/html5/thumbnails/16.jpg)
AESTHETIC FINISHES
▪ Moireing
The moire effect provides a wood grain or watermarked appearance.
▪ Schreinerizing.
Schreinerizing provides a sharp line appearance.
This process is carried out with a metal rollerengraved with very fine 200-500 diagonal linesper inch of the roller.
![Page 17: Textile processing - Kongunadu Arts and Science College](https://reader030.vdocuments.us/reader030/viewer/2022012803/61bd248061276e740b0fcb17/html5/thumbnails/17.jpg)
3.FUNCTIONAL FINISHES
Functional finishes given to fabrics to
improve their performance in terms of
stability , shape, appearance, comfort,
resistance to insects and microbes, and
safety.
![Page 18: Textile processing - Kongunadu Arts and Science College](https://reader030.vdocuments.us/reader030/viewer/2022012803/61bd248061276e740b0fcb17/html5/thumbnails/18.jpg)
a)Comfort Related Finishes
Comfort related finishes are given to fabrics to them
comfortable to wear.
▪ Water-repellent Finishes :
Water-repelling fabrics are resistant to wetting but tend to
get wet in excessive water, water repellency is dependent
on surface tension and fabric permeability and therefore
can be controlled by a combination of right fabric
construction and finishing .
![Page 19: Textile processing - Kongunadu Arts and Science College](https://reader030.vdocuments.us/reader030/viewer/2022012803/61bd248061276e740b0fcb17/html5/thumbnails/19.jpg)
a)Comfort Related Finishes
▪ Water-repellent Finishes
Water-repelling fabrics need to have a very high warp
count and should be made of regular yarns.
The most common water-repelling chemicals are
silicones, as they are durable when combined with durable
press finished. These also give the fabric good drape,soft
hand and stain resistance.
![Page 20: Textile processing - Kongunadu Arts and Science College](https://reader030.vdocuments.us/reader030/viewer/2022012803/61bd248061276e740b0fcb17/html5/thumbnails/20.jpg)
Comfort Related Finishes
▪ Anti- static Finishes
Static build up refers to the problem of garments clinging
on to the body or to other fabrics. Static build-up also
creates problems during production as fabrics cling to the
machinery and attract dust and dirt.
Anti-static finishes in the form of ammonium compounds
are applied to reduce the static build-up on fabrics. These
finishes act by improving surface conductivity so that
excess electrons move to the atmosphere or ground.
![Page 21: Textile processing - Kongunadu Arts and Science College](https://reader030.vdocuments.us/reader030/viewer/2022012803/61bd248061276e740b0fcb17/html5/thumbnails/21.jpg)
b)Safety-Related Finishes
Safety-related finishes are applied on fabrics to
make the wearer safe as per their usage. There are
various types of Safety-related finishes.
▪ Flame –Retarding Finishes
Flame-related finishes act by either blocking the flame’s
access to fuel and hindering flame propagation or emitting
a flame extinguishing gas. They also act by modifying the
solids so that the end-products of combustion are not
volatile or require excess heat to continue the fire.
![Page 22: Textile processing - Kongunadu Arts and Science College](https://reader030.vdocuments.us/reader030/viewer/2022012803/61bd248061276e740b0fcb17/html5/thumbnails/22.jpg)
c)Biological Control Finishes
A large number of insects can damage textiles,
especially when the fabric is stored in dump and
warm conditions. Therefore, the fabrics should
always be stored in dry conditions after cleaning.
For extra protection, some finishes can be
applied to the fabrics.
![Page 23: Textile processing - Kongunadu Arts and Science College](https://reader030.vdocuments.us/reader030/viewer/2022012803/61bd248061276e740b0fcb17/html5/thumbnails/23.jpg)
Biological Control Finishes
▪ Anti-Mildew Finishes
Both cellulosic and protein fibres are damaged by
moulds and mildew. It is best to prevent mildew growth
by keeping textiles clean and dry and by regularly sunning
and airing them. Electric lights and dehumidifiers can be
used in dark and humid places.
The finishes in the form of salicylanilide, also known as
fungicides are applied to prevent mildew growth.
![Page 24: Textile processing - Kongunadu Arts and Science College](https://reader030.vdocuments.us/reader030/viewer/2022012803/61bd248061276e740b0fcb17/html5/thumbnails/24.jpg)
Biological Control Finishes
▪ Anti-Moth Finishes
Insects, such as silverfish, crickets and cockroaches,
damage textiles, especially the textiles that are soiled.
Moths and carpet beetles damage protein fibers. The
problem aggravates in heat and moisture.
▪ Insect control finishes, knows as fumigants and
insecticides can be used to protect the fabrics.
▪ Other method of insects control storing fabrics in a cold
place.
![Page 25: Textile processing - Kongunadu Arts and Science College](https://reader030.vdocuments.us/reader030/viewer/2022012803/61bd248061276e740b0fcb17/html5/thumbnails/25.jpg)
Biological Control Finishes
Anti-Bacterial Finishes
Anti-Bacterial finishes act by inhibiting the
growth of bacteria and other odor-causing germs,
preventing damage due to sweat, controlling
spread of disease, and reducing infection risk
after injury. These finishes are also known as
antibacterial , antiseptic and germicidal. These
finishes are used in hospital linen; contract
carpeting, and skin contact clothing.
![Page 26: Textile processing - Kongunadu Arts and Science College](https://reader030.vdocuments.us/reader030/viewer/2022012803/61bd248061276e740b0fcb17/html5/thumbnails/26.jpg)
Biological Control Finishes
▪ Anti-Bacterial Finishes
The most widely used finish these days is irradiation
treatment or sterilization, also known as electron beam
sterilization.
This treatment is cheaper, simpler, safer and is used for
medical products, such as sutures and bandages. The
beam can penetrate thermoplastic and foil packaging and
therefore the goods can even be treated in the packed
state. This process maintains the sterile environment until
the package is opened.
![Page 27: Textile processing - Kongunadu Arts and Science College](https://reader030.vdocuments.us/reader030/viewer/2022012803/61bd248061276e740b0fcb17/html5/thumbnails/27.jpg)
DYEING
Definition:
Dyeing is the application of dyes or
pigments on textile materials such as fibers,
yarns, and fabrics with the goal of
achieving color with desired color fastness.
![Page 28: Textile processing - Kongunadu Arts and Science College](https://reader030.vdocuments.us/reader030/viewer/2022012803/61bd248061276e740b0fcb17/html5/thumbnails/28.jpg)
TEXTILE DYEING
Dye:
A dye can generally be described as a colored substance that
has an affinity to the substrate to which it is being applied. The
dye is usually used as an aqueous solution and may require
a mordant to improve the fastness of the dye on the fiber.
Pigment:
Pigments are the special type of dyeing or printing materials
for wet processing technology. Generally pigment is use for
printing. Pigments can be define as a water insoluble coloring
material mostly mineral origin have been used for coloration of
metal, wood, stone and textile materials
![Page 29: Textile processing - Kongunadu Arts and Science College](https://reader030.vdocuments.us/reader030/viewer/2022012803/61bd248061276e740b0fcb17/html5/thumbnails/29.jpg)
Difference between Printing and Dyeing
Dyeing has no
localized application.
According to
the design printing has localized
application of dyes or pigments on the
fabric
Color is
applied in form of solution.
Color is
applied in form of thick paste.
In this
process fabric, yarn and fibers are dyed.
In printing
only fabric are print.
liquor ratio is higher. Less liquor ratio here than dyeing
application.
Thickener is not used here. Thickener is widely used here.
Steaming is
not required on dyed material.
Steaming is used in the printed fabric for
fixation.
Here, color penetrates throughout the
fabric.
Here, color is applied only in the fabric
surface.
less expensive. More expensive.
![Page 30: Textile processing - Kongunadu Arts and Science College](https://reader030.vdocuments.us/reader030/viewer/2022012803/61bd248061276e740b0fcb17/html5/thumbnails/30.jpg)
Classification of dye
![Page 31: Textile processing - Kongunadu Arts and Science College](https://reader030.vdocuments.us/reader030/viewer/2022012803/61bd248061276e740b0fcb17/html5/thumbnails/31.jpg)
DYES
Acid or Anionic Dyes
Acid or Anionic dyes have a complete color
range and can be used on protein fibers and man-
made fibers, such as polyester, modified acrylic
and modified rayon.
The dyes produce bright colors but have poor
fastness to washing and therefore fabrics need to
be dry-cleaned.
![Page 32: Textile processing - Kongunadu Arts and Science College](https://reader030.vdocuments.us/reader030/viewer/2022012803/61bd248061276e740b0fcb17/html5/thumbnails/32.jpg)
DYES
Azoic Dyes
Azoic dyes are applied in cold bath with ice, as
this helps lower the dye-bath temperature for
efficient dyeing.
They are also known as ice colors.
The dyes have a complete color of bright shades
in yellows,reds and blacks.
The dyes are cheap and are mainly used for
cottons along with limited use on acetate and
nylon.
![Page 33: Textile processing - Kongunadu Arts and Science College](https://reader030.vdocuments.us/reader030/viewer/2022012803/61bd248061276e740b0fcb17/html5/thumbnails/33.jpg)
DYES
Basic or Cationic Dyes
The first synthetic dyes produced belonged to the class
of Basic or Cationic dyes.
It also have a complete color range with bright colors,
but have limited use these days.
It can be used to dye cottons with the help of mordants,
while other fibers, such as wool, silk, nylon, acrylic, and
polyester, can be dyed without mordanting.
Basic days are mainly used on acrylics and for direct
printing on acetate and discharge printing on cottons.
![Page 34: Textile processing - Kongunadu Arts and Science College](https://reader030.vdocuments.us/reader030/viewer/2022012803/61bd248061276e740b0fcb17/html5/thumbnails/34.jpg)
DYES
Direct Dyes(developed)
Direct (developed) dyes are developed in the
fiber with the help of copper salts.
It also have a complete color range through the
colors are not as bright as in the case of acid or
basic dyes.
They are used to dye cellulosic fibers, but some
can dye wool, silk, and nylon fibres.
![Page 35: Textile processing - Kongunadu Arts and Science College](https://reader030.vdocuments.us/reader030/viewer/2022012803/61bd248061276e740b0fcb17/html5/thumbnails/35.jpg)
DYES
Disperse Dyes
Disperse class of dyes was developed for acetates but ispresently used for all man-made fibers.
Disperse dye is insoluble in water, the dye particlesdisperse in water so as to dissolve in fibers.
Shade range is good.
The dye fastness to light is fair to excellent whilehaving fair to good wash fastness.
Fastness to perspiration, rubbing, and sea water is good,but it can stain wool badly.
![Page 36: Textile processing - Kongunadu Arts and Science College](https://reader030.vdocuments.us/reader030/viewer/2022012803/61bd248061276e740b0fcb17/html5/thumbnails/36.jpg)
DYES
Reactive Dyes
Reactive dyes are available in several varieties,
such as hot and cold. These dyes form chemical
combinations with the fiber and produce the
brightest shade on cottons.
The dye provides good all-around fastness and is
used for dyeing at the fiber stage, yarn stage,
fabric stage and is also used for printing.
![Page 37: Textile processing - Kongunadu Arts and Science College](https://reader030.vdocuments.us/reader030/viewer/2022012803/61bd248061276e740b0fcb17/html5/thumbnails/37.jpg)
DYES
Reactive Dyes
Some reactive dyes can be used for wool, silk
nylons, acrylics, and blends.
These dyes have good light, wash and dry-
cleaning fastness.
They also have good resistance to bleeding
perspiration, rubbing, and sea water.
![Page 38: Textile processing - Kongunadu Arts and Science College](https://reader030.vdocuments.us/reader030/viewer/2022012803/61bd248061276e740b0fcb17/html5/thumbnails/38.jpg)
DYES
Sulfur Dyes
Sulfur dyes are generally insoluble in water. The
colors are not bright and shade range is also
incomplete.
The dye can be applied at the fiber, yarn of fabric
stage.
It Is used for both heavy woven and cotton knits,
and jute and linen. It is not used much for
printing.
![Page 39: Textile processing - Kongunadu Arts and Science College](https://reader030.vdocuments.us/reader030/viewer/2022012803/61bd248061276e740b0fcb17/html5/thumbnails/39.jpg)
DYES
Vat Dyes
Vat Dyes are insoluble in water and require
reduction for their application . Their shade
range is incomplete. They are mainly used for
cottons and sometimes woolens, mostly for
printing.
These dyes have good light, wash, and dry-
cleaning fastness along with having food
resistance to perspiration, rubbing, sea water and
bleeding.
![Page 40: Textile processing - Kongunadu Arts and Science College](https://reader030.vdocuments.us/reader030/viewer/2022012803/61bd248061276e740b0fcb17/html5/thumbnails/40.jpg)
DYES
A mordant is a substance used to set dyes on
fabrics by forming a coordination complex with
the dye which then attaches to the fabric.
![Page 41: Textile processing - Kongunadu Arts and Science College](https://reader030.vdocuments.us/reader030/viewer/2022012803/61bd248061276e740b0fcb17/html5/thumbnails/41.jpg)
STAGES OF DYEING
▪ Stock dyeing at the fiber stage
▪ Top dyeing at the sliver stage
▪ Dope dyeing before a man made fiber is
extruded from the spinneret
▪ Yarn dyeing after the fiber has been spun into
yarn
▪ Piece dyeing after the yarn has been constructed
into fabric
▪ Garment dyeing after the apparel has been
constructed
![Page 42: Textile processing - Kongunadu Arts and Science College](https://reader030.vdocuments.us/reader030/viewer/2022012803/61bd248061276e740b0fcb17/html5/thumbnails/42.jpg)
METHODS OF DYEING
The process of dyeing can also be classified onthe basis of the dyeing methods. The followingare the three methods of combining the dye withthe textile:
• Batch Dyeing : Textile is circulated in a dye-bath
• Package Dyeing : Dye-bath is circulated around the textile
• Combination Dyeing : Both textile and dye-bath are circulated together.
![Page 43: Textile processing - Kongunadu Arts and Science College](https://reader030.vdocuments.us/reader030/viewer/2022012803/61bd248061276e740b0fcb17/html5/thumbnails/43.jpg)
a)Batch dyeing
Batch dyeing is also known as exhaust dyeing. In
this process, the textile is circulated through the
dye-bath.
The process has good flexibility in terms of color
selection and low cost. Temperature can be
controlled depending on the dye fiber
combination. Beck dyeing, jig dyeing and pad
dyeing are some examples of this type of dyeing.
![Page 44: Textile processing - Kongunadu Arts and Science College](https://reader030.vdocuments.us/reader030/viewer/2022012803/61bd248061276e740b0fcb17/html5/thumbnails/44.jpg)
Winch dyeing
The winch or beck dyeing machine is oldest form of piece dyeing machine.
It is suitable for practical all types of fabric,especially light weights, which can normallywithstand creasing when in rope form as woolen andsilk fabric, loosely woven cotton and syntheticfabrics, circular and warp knitted fabrics.
This a dyeing machine for fabrics in rope forms withstationary liquor and moving material.
![Page 45: Textile processing - Kongunadu Arts and Science College](https://reader030.vdocuments.us/reader030/viewer/2022012803/61bd248061276e740b0fcb17/html5/thumbnails/45.jpg)
Winch dyeing machine
![Page 46: Textile processing - Kongunadu Arts and Science College](https://reader030.vdocuments.us/reader030/viewer/2022012803/61bd248061276e740b0fcb17/html5/thumbnails/46.jpg)
Jigger dyeing
Jigger dyeing machine is the most commonly used fordyeing all kinds of cotton fabric. There are mainly two typesof jigger dyeing machine. One is open jigger dyeingmachine and other is closed jigger dyeing machine.This machine consists of V shaped stainless steel vessel.Two rollers are fitted above the vessel called as cloth rollers.These rollers are rotated by power.Out of these two rollers one roller is driven by a motorwhich is called take up roller and the other roller fromwhich the cloth is delivered is called let off roller.When all the cloth is passed from the let off roller to thetake up roller, it is called as one end or one turn. Thenumber of ends or turns depends upon the type of thefabric and also the percentage of the shade.
![Page 47: Textile processing - Kongunadu Arts and Science College](https://reader030.vdocuments.us/reader030/viewer/2022012803/61bd248061276e740b0fcb17/html5/thumbnails/47.jpg)
Jigger dyeing machine
![Page 48: Textile processing - Kongunadu Arts and Science College](https://reader030.vdocuments.us/reader030/viewer/2022012803/61bd248061276e740b0fcb17/html5/thumbnails/48.jpg)
b) Package dyeing
In Package dyeing, the dye-bath is forced
through the textile. Normally, the textile is
in yarn stage but the technique is also used
for some fiber or fabric dyeing. Examples
include beam dyeing, skein dyeing,
package dyeing, stock dyeing and top
dyeing.
![Page 49: Textile processing - Kongunadu Arts and Science College](https://reader030.vdocuments.us/reader030/viewer/2022012803/61bd248061276e740b0fcb17/html5/thumbnails/49.jpg)
Package dyeing machine
![Page 50: Textile processing - Kongunadu Arts and Science College](https://reader030.vdocuments.us/reader030/viewer/2022012803/61bd248061276e740b0fcb17/html5/thumbnails/50.jpg)
c)Combination Dyeing
In combination dyeing, both textile and
dye-bath are circulated, for example,
jet dyeing, paddle machine dyeing.
![Page 51: Textile processing - Kongunadu Arts and Science College](https://reader030.vdocuments.us/reader030/viewer/2022012803/61bd248061276e740b0fcb17/html5/thumbnails/51.jpg)
Jet dyeing
Jet dyeing is a process that can be used for batch dyeingoperations such as dyeing, bleaching, washing and rinsing.
In this process, dyeing is accomplished in a closed tubularsystem, basically composed of an impeller pump and ashallow dye bath.
The fabric to be dyed is loosely collapsed in a form of a rope,and tied into a loop.
The impeller pump supplies a jet of dye solution, propelled bywater and/or air, which transport the fabric within the dyeingsystem ,surrounded by dye liquor , under optimumconditions.
Turbulence created by the jet aids in dye penetration andprevents the fabric from touching the walls of the tube, thusminimizing mechanical impact on the fabric.
![Page 52: Textile processing - Kongunadu Arts and Science College](https://reader030.vdocuments.us/reader030/viewer/2022012803/61bd248061276e740b0fcb17/html5/thumbnails/52.jpg)
Jet dyeing
![Page 53: Textile processing - Kongunadu Arts and Science College](https://reader030.vdocuments.us/reader030/viewer/2022012803/61bd248061276e740b0fcb17/html5/thumbnails/53.jpg)
Padding machine
Padding mangle offer continuous process of thefabric in concerned liquor , such as pretreatment,dyeing or
finishing.
Application of dyestuffs is conducted in the paddyeing machines with single or multiple dipping insolution. During padding, the fabric passes into asolution of chemicals, under a submerged roller andout of the bath. It is then squeezed to remove excesssolution .
![Page 54: Textile processing - Kongunadu Arts and Science College](https://reader030.vdocuments.us/reader030/viewer/2022012803/61bd248061276e740b0fcb17/html5/thumbnails/54.jpg)
Padding machine
![Page 55: Textile processing - Kongunadu Arts and Science College](https://reader030.vdocuments.us/reader030/viewer/2022012803/61bd248061276e740b0fcb17/html5/thumbnails/55.jpg)
PRINTING
Printing is coloring applied to pre-planned
areas of a fabric surface. In printing, a
pattern to a design is imprinted on the
fabric in in one or more colors using dyes
or pigments in paste form or by other
means.
![Page 56: Textile processing - Kongunadu Arts and Science College](https://reader030.vdocuments.us/reader030/viewer/2022012803/61bd248061276e740b0fcb17/html5/thumbnails/56.jpg)
PRINTING
The printing paste is made up of the following ingredients
along with the colorant:
• Catalysis : Help bond the pigment to the fiber.
• Opacifiers : Give different type of luster, such as flossy,
matte, and metallic, to the print and produce a pigment
with good covering power.
• Thickeners : Help produce dark shades. They are added to
avoid migration of the paste to surrounding areas.
• Thinners : Help to thin down a thick paste when added.
![Page 57: Textile processing - Kongunadu Arts and Science College](https://reader030.vdocuments.us/reader030/viewer/2022012803/61bd248061276e740b0fcb17/html5/thumbnails/57.jpg)
PRINTING
• Anti-bleeding agents: Eliminate the halo effect, keeping
the print edges sharp and clear.
• Softeners : Help maintain a soft hand.
• Retarders : Help slow down the drying process when
added to the paste. This is helpful in the maintenance of
screens.
• Dryers : Help speed up the drying process in slow-drying
pigments.
![Page 58: Textile processing - Kongunadu Arts and Science College](https://reader030.vdocuments.us/reader030/viewer/2022012803/61bd248061276e740b0fcb17/html5/thumbnails/58.jpg)
Classification of printing
![Page 59: Textile processing - Kongunadu Arts and Science College](https://reader030.vdocuments.us/reader030/viewer/2022012803/61bd248061276e740b0fcb17/html5/thumbnails/59.jpg)
TYPES OF PRINTS
a).Direct Prints
In direct prints, color in the form of printing paste is applied directly to the fabric in pattern.
This method of manufacturing the direct prints is easy and economical. These are darker color prints on white or light color background.
Patterns are sharp at the front side and slightly dullat the back side.
![Page 60: Textile processing - Kongunadu Arts and Science College](https://reader030.vdocuments.us/reader030/viewer/2022012803/61bd248061276e740b0fcb17/html5/thumbnails/60.jpg)
Printing methods
Block printing
This is a traditional printing method where a blockmade from wood, rubber, sponge or metal is shapedinto a relief pattern (usually using a laser cutter or byhand), then dye is applied to the block and it is handprinted, or stamped, on to fabric. The print can thenbe repeated several times to achieve a pattern.
![Page 61: Textile processing - Kongunadu Arts and Science College](https://reader030.vdocuments.us/reader030/viewer/2022012803/61bd248061276e740b0fcb17/html5/thumbnails/61.jpg)
Block printing
![Page 62: Textile processing - Kongunadu Arts and Science College](https://reader030.vdocuments.us/reader030/viewer/2022012803/61bd248061276e740b0fcb17/html5/thumbnails/62.jpg)
Printing method
Screen printing:This method requires a screen, which is a frame with a finemesh fabric tightly stretched over it. A pattern is either instencil form or is blocked off on the screen itself, using ascreen for each colour to be printed. Dye is pushed throughthe mesh fabric with a squeegee tool to evenly disperse thedye into the fabric below in the areas that have not beenblocked out.Flat-screen printing is done in a similar way but machinesoperate each stage and often the pattern is applied to thescreen digitally.Digital printing is a favored method for small batches offabric, as screen printing is an expensive process requiringspace and specialist equipment.
![Page 63: Textile processing - Kongunadu Arts and Science College](https://reader030.vdocuments.us/reader030/viewer/2022012803/61bd248061276e740b0fcb17/html5/thumbnails/63.jpg)
Screen printing
![Page 64: Textile processing - Kongunadu Arts and Science College](https://reader030.vdocuments.us/reader030/viewer/2022012803/61bd248061276e740b0fcb17/html5/thumbnails/64.jpg)
Printing method
Engraved Roller Printing
Engraved roller printing is an industrial method forlarge print runs; metal rollers are engraved with apattern and dye reservoirs apply the color as needed.As in screen printing, a roller is needed for eachcolor; the method is therefore too expensive for shortruns of fabric, but it can be very cost-effective forlarge print runs as hundreds of metres can beprinted per minute.
![Page 65: Textile processing - Kongunadu Arts and Science College](https://reader030.vdocuments.us/reader030/viewer/2022012803/61bd248061276e740b0fcb17/html5/thumbnails/65.jpg)
Engraved Roller printing
![Page 66: Textile processing - Kongunadu Arts and Science College](https://reader030.vdocuments.us/reader030/viewer/2022012803/61bd248061276e740b0fcb17/html5/thumbnails/66.jpg)
Printing method
Stenciling
Stencils are made from card.
The pattern is cut out and then the dye is sponged orbrushed into the cut-out areas. Each stencil can beused several times.
Today many stencils are made using computerizedcutting machines for more accuracy than hand-cutstencils.
![Page 67: Textile processing - Kongunadu Arts and Science College](https://reader030.vdocuments.us/reader030/viewer/2022012803/61bd248061276e740b0fcb17/html5/thumbnails/67.jpg)
Stencil print
![Page 68: Textile processing - Kongunadu Arts and Science College](https://reader030.vdocuments.us/reader030/viewer/2022012803/61bd248061276e740b0fcb17/html5/thumbnails/68.jpg)
Printing method
Digital Printing
A design can be made on the computer usingcomputer-aided design (CAD) packages and theneither transferred on to paper (sublimation paper),which can be transferred to the fabric with heat, or itcan be directly printed on to the fabric using a textileprinter and then steam heated to fix the design.
In direct printing the fabric may need to be thickenedusing a special chemical agent, which can be washedout afterwards, to help it feed through the printer.
![Page 69: Textile processing - Kongunadu Arts and Science College](https://reader030.vdocuments.us/reader030/viewer/2022012803/61bd248061276e740b0fcb17/html5/thumbnails/69.jpg)
Digital printing
![Page 70: Textile processing - Kongunadu Arts and Science College](https://reader030.vdocuments.us/reader030/viewer/2022012803/61bd248061276e740b0fcb17/html5/thumbnails/70.jpg)
Printing method
Rotary screen printing Rotary screen printing uses seamless cylindrical screens
made of metal foil. The machine uses a rotary screen for each colour. As the
fabric is fed under uniform tension into the printer sectionof the machine, its back is usually coated with an adhesivewhich causes it to adhere to a conveyor printing blanket.
The fabric passes under the rotating screen through whichthe printing paste is automatically pumped from pressuretanks.
A squeegee in each rotary screen forces the pastethrough the screen onto the fabric as it moves along . Thefabric then passes to a drying oven.
![Page 71: Textile processing - Kongunadu Arts and Science College](https://reader030.vdocuments.us/reader030/viewer/2022012803/61bd248061276e740b0fcb17/html5/thumbnails/71.jpg)
Rotary Screen printing
![Page 72: Textile processing - Kongunadu Arts and Science College](https://reader030.vdocuments.us/reader030/viewer/2022012803/61bd248061276e740b0fcb17/html5/thumbnails/72.jpg)
Printing method
Heat-transfer printing
In heat-transfer printing, the pattern is firstprinted onto a special paper substrate. The paper isthen positioned against the fabric and subjected toheat and pressure. The dyes are transferred tothe fabric via sublimation.
![Page 73: Textile processing - Kongunadu Arts and Science College](https://reader030.vdocuments.us/reader030/viewer/2022012803/61bd248061276e740b0fcb17/html5/thumbnails/73.jpg)
TYPES OF PRINTS
2.Discharge Prints
Discharge prints are unique in which the pattern
is created by removing color from the selected
areas of the fabric and leaving it devoid of any
color or introducing another color from where
the discharge paste has removed color. This
technique is carried out on dark background to
attain maximum color effect.
![Page 74: Textile processing - Kongunadu Arts and Science College](https://reader030.vdocuments.us/reader030/viewer/2022012803/61bd248061276e740b0fcb17/html5/thumbnails/74.jpg)
TYPES OF PRINTS
3.Resist Prints
In Resist prints, color absorption in fabrics is
blocked or resisted at the time if yarn or fabric
dyeing. There are three different types of resist
prints .
![Page 75: Textile processing - Kongunadu Arts and Science College](https://reader030.vdocuments.us/reader030/viewer/2022012803/61bd248061276e740b0fcb17/html5/thumbnails/75.jpg)
Types of Resist Prints
a)Batik :
Batik involves the application of hot wax to
resist color application in specified areas. The
wax is applied by hand depending on the
design and is then left to harden. The fabric is
then piece dyed and the hardened wax prevents
the penetration of color into the waxed areas.
The wax is later removed to get the batik
printed fabric.
![Page 76: Textile processing - Kongunadu Arts and Science College](https://reader030.vdocuments.us/reader030/viewer/2022012803/61bd248061276e740b0fcb17/html5/thumbnails/76.jpg)
Batik
![Page 77: Textile processing - Kongunadu Arts and Science College](https://reader030.vdocuments.us/reader030/viewer/2022012803/61bd248061276e740b0fcb17/html5/thumbnails/77.jpg)
TYPES OF RESIST PRINTS
Tie and Dye:
This is also a hand process in which the color penetration
is resisted by using tightly tied cotton threads. It is a
laborious process producing beautiful result in a number
of colors.
In tie and dye, the yarn or fabric to be dyed is first tied
with thread to resist color penetration in areas as required
by the design and then dyed in the first color, which is
lightest of all. This process of tying and dyeing continues
till the product is colored in its final color.
![Page 78: Textile processing - Kongunadu Arts and Science College](https://reader030.vdocuments.us/reader030/viewer/2022012803/61bd248061276e740b0fcb17/html5/thumbnails/78.jpg)
Tie and Dye
![Page 79: Textile processing - Kongunadu Arts and Science College](https://reader030.vdocuments.us/reader030/viewer/2022012803/61bd248061276e740b0fcb17/html5/thumbnails/79.jpg)
TYPES OF RESIST PRINTS
Ikat :
Ikat is a traditional art of weaving in which the yarn is
tied in a pattern specified by the design to resist color
from entering in those areas.
The yarn is then dyed and the ready yarn is used to
weave a fabric in which the design can be formed by
only warp dyeing, weft dyeing, or a combination of
warp and weft dyeing.
These techniques are know as warp ikat, weft ikat and
double ikat, respectively.
![Page 80: Textile processing - Kongunadu Arts and Science College](https://reader030.vdocuments.us/reader030/viewer/2022012803/61bd248061276e740b0fcb17/html5/thumbnails/80.jpg)
Ikat dyeing
![Page 81: Textile processing - Kongunadu Arts and Science College](https://reader030.vdocuments.us/reader030/viewer/2022012803/61bd248061276e740b0fcb17/html5/thumbnails/81.jpg)
Thank you