testing laboratory iso/iec 17025; 2005 accreditation no ...iso/iec 17025; 2005 accreditation no. 037...

49
037 Accreditation No. ISO/IEC 17025; 2005 ISO/IEC 17025; 2005 ISO/IEC 17020; 2012 Testing Laboratory Calibration Laboratory Inspection Activity-Type A Department: ื”ืชืขื•ื“ื” ื”ืžืฆื•ืจืคืช ืœื ืกืคื— ื–ื” ืžื”ื•ื•ื” ื—ืœืง ื‘ืœืชื™ ื ืคืจื“ ืžืžื ื• ื•ืžืกืคืจื” ื–ื”ื” ืœืžืกืคืจ ื”ื ืกืคื—The certificate attached is an integral part of the schedule and is numbered identically Date of issue 12.07.2017 Version No. 17 Page No. 1 of: 49 Name and Address: System Maabadot Mitkadmot ltd. Building 3, 4 Faran Street, North Industrial Zone, Yavne 81225, Israel Organization Name Main office Address +972-8-942-2322 Phone +972-8-942-1333 Fax E-Mail As declared by the organization, following is a list of the permanent sites and the phones numbers at which accredited activities are preformed P Main: Center (Yavne) Definitions: Main site: A central site where the quality system is controlled for all sites where tests, calibrations or sampling are performed. Permanent site (Branch): Permanent or temporary site existing longer than 6 months where at, or from which, the activities part of the accreditation schedule are performed. P1 Beer Sheva +972-8-620-9238 P2 Hasharon (Hadera) +972-4-632-2513 P3 Jerusalem +972-2-643-0506 P4 North (Haifa) +972-4-840-0363 P5 Eilat +972-8-637-8948 P6 Chemistry and Microbiology lab, Har Tov, Industrial Zone A +972-2-570-0733

Upload: others

Post on 04-Feb-2021

56 views

Category:

Documents


0 download

TRANSCRIPT

  • 037 Accreditation No. ISO/IEC 17025; 2005

    ISO/IEC 17025; 2005

    ISO/IEC 17020; 2012

    Testing Laboratory

    Calibration Laboratory

    Inspection Activity-Type A

    Department:

    The certificate attached is an integral part of the schedule and is numbered identicallyื”ืชืขื•ื“ื” ื”ืžืฆื•ืจืคืช ืœื ืกืคื— ื–ื” ืžื”ื•ื•ื” ื—ืœืง ื‘ืœืชื™ ื ืคืจื“ ืžืžื ื• ื•ืžืกืคืจื” ื–ื”ื” ืœืžืกืคืจ ื”ื ืกืคื—

    Date of issue 12.07.2017 Version No. 17 Page No. 1 of: 49

    Name and Address:

    System Maabadot Mitkadmot ltd.

    Building 3, 4 Faran Street, North Industrial Zone, Yavne 81225, Israel

    Organization Name

    Main office Address

    +972-8-942-2322 Phone

    +972-8-942-1333 Fax

    E-Mail

    As declared by the organization, following is a list of the permanent sites and the phones numbers at which accredited activities are preformed

    P Main: Center (Yavne) Definitions:

    Main site:

    A central site where the quality system is controlled

    for all sites where tests, calibrations or sampling are

    performed.

    Permanent site (Branch):

    Permanent or temporary site existing longer than 6

    months where at, or from which, the activities part of

    the accreditation schedule are performed.

    P1 Beer Sheva +972-8-620-9238

    P2 Hasharon (Hadera) +972-4-632-2513

    P3 Jerusalem +972-2-643-0506

    P4 North (Haifa) +972-4-840-0363

    P5 Eilat +972-8-637-8948

    P6 Chemistry and Microbiology lab,

    Har Tov, Industrial Zone A

    +972-2-570-0733

  • 037 Accreditation No. ISO/IEC 17025; 2005 Testing Laboratory Department:

    Schedule of Accreditation

    Site: P or T or M, P-Permanent, T-Temporary, M-Mobile

    Type of Scopes: A- Fixed, C- Flexible scope in analytical tests: Type of matrix, analytes, experimental systems and/or analytical characteristics may be subject to changes, in accordance with the laboratory's

    approved and documented procedures. For details, please refer to the list of Accredited Tests, available from the laboratory upon request.

    Date of issue 12.07.2017 Version No. 17 Page No. 2 of: 49 The certificate attached is an integral part of the schedule and is numbered identically ื”ืชืขื•ื“ื” ื”ืžืฆื•ืจืคืช ืœื ืกืคื— ื–ื” ืžื”ื•ื•ื” ื—ืœืง ื‘ืœืชื™ ื ืคืจื“ ืžืžื ื• ื•ืžืกืคืจื” ื–ื”ื” ืœืžืกืคืจ ื”ื ืกืคื—

    Item Scope

    Type

    Site Materials / Products Tested Types of Test / Properties Measured Standard / Method Opinion and

    Interpretation

    Remarks

    Group of Products: Construction - Building Systems :ืžืขืจื›ื•ืช ื”ื‘ื ื™ื™ืŸ -ื‘ื ื™ื” ืžืฉืคื—ืช ืžื•ืฆืจื™ื

    Design and Installation, Building Envelope ืžืขื˜ืคืช ื”ืžื‘ื ื”ืชื›ืŸ ื•ื”ืชืงื ื” ,

    1 A T;T1 External walls and openings in external walls

    ืงื™ืจื•ืช ื—ื™ืฆื•ื ื™ื™ื ื•ืคืชื—ื™ื ื‘ืงื™ืจื•ืช ื—ื™ืฆื•ื ื™ื™ื

    Water tightness test ื‘ื“ื™ืงืช ืื˜ื™ืžื•ืช SI 1476 part 2 ---

    SI = Israeli Standards

    2 A T;T1 Flat roofs and balconies ื’ื’ื•ืช ืฉื˜ื•ื—ื™ื ื•ืžืจืคืกื•ืช Water tightness test ื‘ื“ื™ืงืช ืื˜ื™ืžื•ืช SI 1476 part 1 ---

    3 A T1 Sloped roofs ืขื™ืื’ื’ื•ืช ืžืฉื•ืค Water tightness test ื‘ื“ื™ืงืช ืื˜ื™ืžื•ืช SI 1476 part 3 ---

  • 037 Accreditation No. ISO/IEC 17025; 2005 Testing Laboratory Department:

    Schedule of Accreditation

    Site: P or T or M, P-Permanent, T-Temporary, M-Mobile

    Type of Scopes: A- Fixed, C- Flexible scope in analytical tests: Type of matrix, analytes, experimental systems and/or analytical characteristics may be subject to changes, in accordance with the laboratory's

    approved and documented procedures. For details, please refer to the list of Accredited Tests, available from the laboratory upon request.

    Date of issue 12.07.2017 Version No. 17 Page No. 3 of: 49 The certificate attached is an integral part of the schedule and is numbered identically ื”ืชืขื•ื“ื” ื”ืžืฆื•ืจืคืช ืœื ืกืคื— ื–ื” ืžื”ื•ื•ื” ื—ืœืง ื‘ืœืชื™ ื ืคืจื“ ืžืžื ื• ื•ืžืกืคืจื” ื–ื”ื” ืœืžืกืคืจ ื”ื ืกืคื—

    Item Scope

    Type

    Site Materials / Products Tested Types of Test / Properties Measured Standard / Method Opinion and

    Interpretation

    Remarks

    Group of Products: Construction - Concrete, Cladding and Raw Materials for Concrete

    Manufacturing

    ืŸ ื•ื—ื•ืžืจื™ ื’ืœื ืœื™ื™ืฆื•ืจ ื‘ื˜ื•ื—ื™ืคื•ื™ื™ื ื‘ื˜ื•ืŸ, -ื‘ื ื™ื” ืžืฉืคื—ืช ืžื•ืฆืจื™ื:

    Physical Testing ื‘ื“ื™ืงื•ืช ืคื™ื–ื™ืงืœื™ื•ืช

    4 A P;T; P1;T1;

    P2;T2;

    P3;T3; P4;T4;

    P5;T5

    Concrete ื‘ื˜ื•ืŸ Making and curing of test specimens

    ื“ื•ื’ืžื•ืช ื‘ื“ื™ืงื” ืฉืœ ื”ื›ื ืช ื•ืืฉืคืจืชืŸ

    SI 26 part 3

    ---

    5 A P;P1; P2; P4 ;P5

    Concrete : Specification,

    performance and production

    : ื“ืจื™ืฉื•ืช ืชืคืงื•ื“ ื‘ื˜ื•ืŸ ื•ื™ื™ืฆื•ืจ

    Compressive strength ื—ื•ื–ืง ื”ืœื—ื™ืฆื” SI 118 section 10.3 & 10.4 ---

    ื ื˜ื™ืœื” ื‘ืœื‘ื“ โ€“P1 ;P2 P5;ื‘ืกื ื™ืคื™ื:

    6 A P;T P2;T2;

    P4;T4

    Fresh concrete ื‘ื˜ื•ืŸ ื˜ืจื™ Air content โ€“ Pressure gauge method

    SI 26 part 2.6 ืœื—ืฅืžื“ ืฉื™ื˜ืช -ืชื›ื•ืœืช ื”ืื•ื•ื™ืจ---

    7 A P;T P2;T2; P4;T4

    Fresh concrete ื‘ื˜ื•ืŸ ื˜ืจื™ Bleeding ื”ืคืจืฉืช ืžื™ื SI 26 part 2.8 ---

    8 A P2;T2 Fresh concrete ื‘ื˜ื•ืŸ ื˜ืจื™ Consistency - Vebe test ื‘ื“ื™ืงืช ืกื•ืžืš ื‘ืฉื™ื˜ืช ื•ื™ื‘ื™ SI 26 part 2.2 ---

    9 A P;T; P1;T1;

    P2;T2;

    P3;T3;

    P4;T4

    Fresh concrete ื‘ื˜ื•ืŸ ื˜ืจื™ Degree of compactability ื“ืจื’ืช ื”ื™ื“ื•ืง โ€“ืกื•ืžืš SI 26 part 2.3

    ---

    10 A P;T; P2;T2;

    P3;T3;

    P4;T4

    Fresh concrete ื‘ื˜ื•ืŸ ื˜ืจื™ Density ืฆืคื™ืคื•ืช SI 26 part 2.5

    ---

  • 037 Accreditation No. ISO/IEC 17025; 2005 Testing Laboratory Department:

    Schedule of Accreditation

    Site: P or T or M, P-Permanent, T-Temporary, M-Mobile

    Type of Scopes: A- Fixed, C- Flexible scope in analytical tests: Type of matrix, analytes, experimental systems and/or analytical characteristics may be subject to changes, in accordance with the laboratory's

    approved and documented procedures. For details, please refer to the list of Accredited Tests, available from the laboratory upon request.

    Date of issue 12.07.2017 Version No. 17 Page No. 4 of: 49 The certificate attached is an integral part of the schedule and is numbered identically ื”ืชืขื•ื“ื” ื”ืžืฆื•ืจืคืช ืœื ืกืคื— ื–ื” ืžื”ื•ื•ื” ื—ืœืง ื‘ืœืชื™ ื ืคืจื“ ืžืžื ื• ื•ืžืกืคืจื” ื–ื”ื” ืœืžืกืคืจ ื”ื ืกืคื—

    Item Scope

    Type

    Site Materials / Products Tested Types of Test / Properties Measured Standard / Method Opinion and

    Interpretation

    Remarks

    Group of Products: Construction - Concrete, Cladding and Raw Materials for Concrete

    Manufacturing

    ืŸ ื•ื—ื•ืžืจื™ ื’ืœื ืœื™ื™ืฆื•ืจ ื‘ื˜ื•ื—ื™ืคื•ื™ื™ื ื‘ื˜ื•ืŸ, -ื‘ื ื™ื” ืžืฉืคื—ืช ืžื•ืฆืจื™ื:

    Physical Testing ื‘ื“ื™ืงื•ืช ืคื™ื–ื™ืงืœื™ื•ืช

    11 A T;T1; T2;T3;

    T4; P5

    Fresh concrete ื‘ื˜ื•ืŸ ื˜ืจื™ Sampling ื ื˜ื™ืœืช ื”ืžื“ื’ื ื”ืžื™ื™ืฆื’ SI 26 part 1 ---

    12 A P2;T2; P4;T4

    Fresh concrete ื‘ื˜ื•ืŸ ื˜ืจื™ Setting time - Penetration resistance

    ื”ืชื ื’ื“ื•ืช -ื–ืžืŸ ื”ื”ืชืงืฉืจื•ืช ืœื—ื“ื™ืจื”

    SI 26 part 2.7 ---

    13 A T;T1; T2;T3;

    T4; P5

    Fresh concrete ื‘ื˜ื•ืŸ ื˜ืจื™ Slump test ื‘ื“ื™ืงืช ืฉืงื™ืขื” -ืกื•ืžืš SI 26 part 2.1 ---

    Meet the requirement of IS 118 part 4.2.1

    14 A P;T; P1;T1; P2;T2;

    P3;T3;

    P4;T4; P5;T5

    Freshly Mixed Portland

    Cement Concrete

    ื‘ื˜ื•ืŸ ืฆืžื ื˜ ืคื•ืจื˜ืœื ื“ ืžืขื•ืจื‘ ื˜ืจื™

    Temperature ื˜ืžืคืจื˜ื•ืจื” ASTM-C-1064

    ---

    ASTM= American Society for Testing

    and Materials

    15 A P Hardened concrete ื‘ื˜ื•ืŸ ืงืฉื•ื™ Abrasion Resistance ืขืžื™ื“ื•ืช ื‘ืฉื—ื™ืงื” SI 26 part 5 section 208 ---

    16 A P;P1; P2;P3;

    P4; P5

    Hardened concrete ื‘ื˜ื•ืŸ ืงืฉื•ื™ Compressive Strength ืœื—ื™ืฆื” ื—ื•ื–ืง SI 26 part 4.1 ---

    17 A P;P2; P4

    Hardened concrete ื‘ื˜ื•ืŸ ืงืฉื•ื™ Depth of penetration of water under pressure

    SI 26 part 5 section 205 ืฉืœ ืžื™ื ื‘ืœื—ืฅ ืขื•ืžืง ื”ื—ื“ื™ืจื”---

    18 A P Hardened concrete ื‘ื˜ื•ืŸ ืงืฉื•ื™ Flexural Strength ื›ืคื™ืคื” ื—ื•ื–ืง SI 26 part 4.2 ---

    19 A P2 Hardened concrete ื‘ื˜ื•ืŸ ืงืฉื•ื™ Flexural Strength ื›ืคื™ืคื” ื—ื•ื–ืง SI 26 part 4.2 ---

  • 037 Accreditation No. ISO/IEC 17025; 2005 Testing Laboratory Department:

    Schedule of Accreditation

    Site: P or T or M, P-Permanent, T-Temporary, M-Mobile

    Type of Scopes: A- Fixed, C- Flexible scope in analytical tests: Type of matrix, analytes, experimental systems and/or analytical characteristics may be subject to changes, in accordance with the laboratory's

    approved and documented procedures. For details, please refer to the list of Accredited Tests, available from the laboratory upon request.

    Date of issue 12.07.2017 Version No. 17 Page No. 5 of: 49 The certificate attached is an integral part of the schedule and is numbered identically ื”ืชืขื•ื“ื” ื”ืžืฆื•ืจืคืช ืœื ืกืคื— ื–ื” ืžื”ื•ื•ื” ื—ืœืง ื‘ืœืชื™ ื ืคืจื“ ืžืžื ื• ื•ืžืกืคืจื” ื–ื”ื” ืœืžืกืคืจ ื”ื ืกืคื—

    Item Scope

    Type

    Site Materials / Products Tested Types of Test / Properties Measured Standard / Method Opinion and

    Interpretation

    Remarks

    Group of Products: Construction - Concrete, Cladding and Raw Materials for Concrete

    Manufacturing

    ืŸ ื•ื—ื•ืžืจื™ ื’ืœื ืœื™ื™ืฆื•ืจ ื‘ื˜ื•ื—ื™ืคื•ื™ื™ื ื‘ื˜ื•ืŸ, -ื‘ื ื™ื” ืžืฉืคื—ืช ืžื•ืฆืจื™ื:

    Physical Testing ื‘ื“ื™ืงื•ืช ืคื™ื–ื™ืงืœื™ื•ืช

    20 A P Hardened concrete ื‘ื˜ื•ืŸ ืงืฉื•ื™ Moisture content when dry in air ืชื›ื•ืœืช ื”ืจื˜ื™ื‘ื•ืช ื‘ืžืฆื‘ ื™ื‘ืฉ ื‘ืื•ื•ื™ืจ

    SI 26 part 5 section 203 ---

    21 A P2 Hardened concrete ื‘ื˜ื•ืŸ ืงืฉื•ื™ Moisture content when dry in air ืชื›ื•ืœืช ื”ืจื˜ื™ื‘ื•ืช ื‘ืžืฆื‘ ื™ื‘ืฉ ื‘ืื•ื•ื™ืจ

    SI 26 part 5 section 203 ---

    22 A P;T; P4;T4

    Hardened concrete ื‘ืžื‘ื ื” ื‘ื˜ื•ืŸ ืฉื”ืชืงืฉื” Sampling, preparing and testing compressive strength

    SI 26 part 6 ื”ื›ื ื” ื•ื‘ื“ื™ืงืช ื—ื•ื–ืง ื ื˜ื™ืœื”,---

    23 A P5;T5 Hardened concrete ื‘ื˜ื•ืŸ ืฉื”ืชืงืฉื” ื‘ืžื‘ื ื” Sampling, preparing and testing compressive strength- Sampling

    only.

    โ€“ื ื˜ื™ืœื”, ื”ื›ื ื” ื•ื‘ื“ื™ืงืช ื—ื•ื–ืง ื ื˜ื™ืœื” ื‘ืœื‘ื“.

    SI 26 part 6 section 4 &

    5 ---

    24 A P Hardened concrete ื‘ื˜ื•ืŸ ืงืฉื•ื™ Specific gravity ืžืกื” ืกื’ื•ืœื™ืช ืžืจื—ื‘ื™ืช SI 26 part 5 section 202 ---

    25 A P2 Hardened concrete ื‘ื˜ื•ืŸ ืงืฉื•ื™ Specific density ืžืกื” ืกื’ื•ืœื™ืช ืžืจื—ื‘ื™ืช SI 26 part 5 section 202 ---

    26 A P;P2 Hardened concrete ื‘ื˜ื•ืŸ ืงืฉื•ื™ Tensile splitting Strength ืžืชื™ื—ื” ืœื ื™ืฉื™ืจื” ื—ื•ื–ืง SI 26 part 4.3 ---

    27 A P Hardened concrete ื‘ื˜ื•ืŸ ืงืฉื•ื™ Water absorption ื›ื•ืฉืจ ืกืคื™ื’ื•ืช ืœืžื™ื SI 26 part 5 section 204 ---

    28 A P2 Hardened concrete ื‘ื˜ื•ืŸ ืงืฉื•ื™ Water absorption ื›ื•ืฉืจ ื”ืกืคื™ื’ื•ืช ืœืžื™ื SI 26 part 5 section 204 ---

    29 A P;P3 Non-structural lightweight concrete

    ื‘ื˜ื•ืŸ ืงืœ ืœืฉื™ืžื•ืฉื™ื ืœื ืžื‘ื ื™ื™ื

    Compressive strength ื—ื•ื–ืง ื”ืœื—ื™ืฆื” SI 1513 section 203 ---

    30 A T; T1; T2; T3; T4; T5

    Non-structural lightweight

    concrete

    ื‘ื˜ื•ืŸ ืงืœ ืœืฉื™ืžื•ืฉื™ื ืœื ืžื‘ื ื™ื™ื

    Sampling ื ื˜ื™ืœืช ืžื“ื’ืžื™ื ื•ื”ื›ื ืช ื“ื•ื’ืžื•ืช ื‘ื“ื™ืงื”

    SI 1513 section 107 ---

  • 037 Accreditation No. ISO/IEC 17025; 2005 Testing Laboratory Department:

    Schedule of Accreditation

    Site: P or T or M, P-Permanent, T-Temporary, M-Mobile

    Type of Scopes: A- Fixed, C- Flexible scope in analytical tests: Type of matrix, analytes, experimental systems and/or analytical characteristics may be subject to changes, in accordance with the laboratory's

    approved and documented procedures. For details, please refer to the list of Accredited Tests, available from the laboratory upon request.

    Date of issue 12.07.2017 Version No. 17 Page No. 6 of: 49 The certificate attached is an integral part of the schedule and is numbered identically ื”ืชืขื•ื“ื” ื”ืžืฆื•ืจืคืช ืœื ืกืคื— ื–ื” ืžื”ื•ื•ื” ื—ืœืง ื‘ืœืชื™ ื ืคืจื“ ืžืžื ื• ื•ืžืกืคืจื” ื–ื”ื” ืœืžืกืคืจ ื”ื ืกืคื—

    Item Scope

    Type

    Site Materials / Products Tested Types of Test / Properties Measured Standard / Method Opinion and

    Interpretation

    Remarks

    Group of Products: Construction - Concrete, Cladding and Raw Materials for Concrete

    Manufacturing

    ืŸ ื•ื—ื•ืžืจื™ ื’ืœื ืœื™ื™ืฆื•ืจ ื‘ื˜ื•ื—ื™ืคื•ื™ื™ื ื‘ื˜ื•ืŸ, -ื‘ื ื™ื” ืžืฉืคื—ืช ืžื•ืฆืจื™ื:

    Physical Testing ื‘ื“ื™ืงื•ืช ืคื™ื–ื™ืงืœื™ื•ืช

    31 A P;P1; P3

    Non-structural lightweight

    concrete

    ื‘ื˜ื•ืŸ ืงืœ ืœืฉื™ืžื•ืฉื™ื ืœื ืžื‘ื ื™ื™ื

    Specific density ืžืกื” ืกื’ื•ืœื™ืช ืžืจื—ื‘ื™ืช SI 1513 section 202 ---

    32 A P; P3 Non-structural lightweight concrete

    ืœื ื‘ื˜ื•ืŸ ืงืœ ืœืฉื™ืžื•ืฉื™ื ืžื‘ื ื™ื™ื

    Water absorption ื›ื•ืฉืจ ื”ืกืคื™ื’ื•ืช ืœืžื™ื SI 1513 section 204 ---

    33 A P;T; P3;T3;

    P4;T4

    Pre-stressed concrete ื‘ื˜ื•ืŸ ื“ืจื•ืš Grout ื“ื™ืก SI 466 part 3 section 31.3 ---

  • 037 Accreditation No. ISO/IEC 17025; 2005 Testing Laboratory Department:

    Schedule of Accreditation

    Site: P or T or M, P-Permanent, T-Temporary, M-Mobile

    Type of Scopes: A- Fixed, C- Flexible scope in analytical tests: Type of matrix, analytes, experimental systems and/or analytical characteristics may be subject to changes, in accordance with the laboratory's

    approved and documented procedures. For details, please refer to the list of Accredited Tests, available from the laboratory upon request.

    Date of issue 12.07.2017 Version No. 17 Page No. 7 of: 49 The certificate attached is an integral part of the schedule and is numbered identically ื”ืชืขื•ื“ื” ื”ืžืฆื•ืจืคืช ืœื ืกืคื— ื–ื” ืžื”ื•ื•ื” ื—ืœืง ื‘ืœืชื™ ื ืคืจื“ ืžืžื ื• ื•ืžืกืคืจื” ื–ื”ื” ืœืžืกืคืจ ื”ื ืกืคื—

    Item Scope

    Type

    Site Materials / Products Tested Types of Test / Properties Measured Standard / Method Opinion and

    Interpretation

    Remarks

    Group of Products: Construction - Engineering Testing :ื‘ื“ื™ืงื•ืช ื”ื ื“ืกื™ื•ืช -ื‘ื ื™ื” ืžืฉืคื—ืช ืžื•ืฆืจื™ื

    Carpentry Work in Buildings and Shelters and Protected Areas ืžื‘ื ื™ืื‘ื•ื ื’ืจื•ืช ืžืงืœื˜ื™ื ืžืžื“ื™ื

    34 A T;T1 Air- raid shelters and protective areas

    SI 4577 ื‘ื“ื™ืงืช ืื˜ื™ืžื•ืช Sealing test ืžืงืœื˜ื™ื ื•ืžืจื—ื‘ื™ื ืžื•ื’ื ื™ื---

    35 A T Air ventilation and filtration systems for air-raid shelters

    ืžืขืจื›ื•ืช ืœืื•ื•ืจื•ืจ ื•ืœืกื™ื ื•ืŸ ืฉืœ ืื•ื•ื™ืจ ื‘ืžืงืœื˜ื™ื

    Acceptance tests ื‘ื“ื™ืงื•ืช ืงื‘ืœื” SI 4570 part 4 section 3.3

    ---

    36 A T Metalworks items for shelters: items for protected

    areas

    ืคืจื™ื˜ื™ ืžืกื’ืจื•ืช ืœืžืงืœื˜ื™ื: ืคืจื™ื˜ื™ื ืœืžืงืœื˜ื™ื ืžืจื—ื‘ื™ื

    ืžื•ื’ื ื™ื

    Installation testing ื‘ื“ื™ืงื•ืช ื”ืชืงื ื” SI 4422 part 3 ---

    37 A T;T1 Metalworks items for shelters: items for shelters

    that are not protected areas

    ืคืจื™ื˜ื™ ืžืกื’ืจื•ืช ืœืžืงืœื˜ื™ื: ืคืจื™ื˜ื™ื ืœืžืงืœื˜ื™ื ืฉืื™ื ื

    ืžืจื—ื‘ื™ื ืžื•ื’ื ื™ื

    Requirements testing and

    installation

    SI 4422 part 1 ื•ื”ืชืงื ื” ื‘ื“ื™ืงื•ืช, ื“ืจื™ืฉื•ืช---

    38 A T;T1 Plaster ื˜ื™ื— Adherence of the plaster system

    SI 1920 part 2 section ื”ื™ื“ื‘ืงื•ืช ืžืขืจื›ืช ื”ื˜ื™ื—5.2.3.4

    --- Requirements according to: SI 5075

    sections 3.1, 4.1.2, 5.1

    39 A T;T1 Plaster ื˜ื™ื— Thickness ืขื•ื‘ื™ SI 1920 part 2 section 5.2.3.5

    --- Requirements according to: SI 5075

    sections 3.2, 4.2, 5.1.3

  • 037 Accreditation No. ISO/IEC 17025; 2005 Testing Laboratory Department:

    Schedule of Accreditation

    Site: P or T or M, P-Permanent, T-Temporary, M-Mobile

    Type of Scopes: A- Fixed, C- Flexible scope in analytical tests: Type of matrix, analytes, experimental systems and/or analytical characteristics may be subject to changes, in accordance with the laboratory's

    approved and documented procedures. For details, please refer to the list of Accredited Tests, available from the laboratory upon request.

    Date of issue 12.07.2017 Version No. 17 Page No. 8 of: 49 The certificate attached is an integral part of the schedule and is numbered identically ื”ืชืขื•ื“ื” ื”ืžืฆื•ืจืคืช ืœื ืกืคื— ื–ื” ืžื”ื•ื•ื” ื—ืœืง ื‘ืœืชื™ ื ืคืจื“ ืžืžื ื• ื•ืžืกืคืจื” ื–ื”ื” ืœืžืกืคืจ ื”ื ืกืคื—

    Item Scope

    Type

    Site Materials / Products Tested Types of Test / Properties Measured Standard / Method Opinion and

    Interpretation

    Remarks

    Group of Products: Construction Materials Raw and Products :ื—ื•ืžืจื™ื ื•ืžื•ืฆืจื™ ื‘ื ื™ื”ืžืฉืคื—ืช ืžื•ืฆืจื™ื

    Chemical Testing, Spectrometry ื™ื”ืจื‘ื“ื™ืงื•ืช ื›ื™ืžื™ื•ืช, ืกืคืงื˜ืจื•ืžื˜

    40 A P Construction materials, Industrial Waste

    --- ฮณ SI 5098 ืžื ื™ื™ืช ืจื“ื™ื•ื ื•ืงืœื™ื“ื™ื ืคื•ืœื˜ื™ Measurements of ฮณ emitters ืžื•ืฆืจื™ ื‘ื ื™ื”, ืคืกื•ืœืช ืชืขืฉื™ืชื™ืช

    41 A P Construction materials, Industrial Waste

    ฮณ SI 5098 --- Requirements of Ministry of ืžื ื™ื™ืช ืจื“ื™ื•ื ื•ืงืœื™ื“ื™ื ืคื•ืœื˜ื™ Measurements of ฮณ emitters ืžื•ืฆืจื™ ื‘ื ื™ื”, ืคืกื•ืœืช ืชืขืฉื™ืชื™ืชEnvironmental Protection

  • 037 Accreditation No. ISO/IEC 17025; 2005 Testing Laboratory Department:

    Schedule of Accreditation

    Site: P or T or M, P-Permanent, T-Temporary, M-Mobile

    Type of Scopes: A- Fixed, C- Flexible scope in analytical tests: Type of matrix, analytes, experimental systems and/or analytical characteristics may be subject to changes, in accordance with the laboratory's

    approved and documented procedures. For details, please refer to the list of Accredited Tests, available from the laboratory upon request.

    Date of issue 12.07.2017 Version No. 17 Page No. 9 of: 49 The certificate attached is an integral part of the schedule and is numbered identically ื”ืชืขื•ื“ื” ื”ืžืฆื•ืจืคืช ืœื ืกืคื— ื–ื” ืžื”ื•ื•ื” ื—ืœืง ื‘ืœืชื™ ื ืคืจื“ ืžืžื ื• ื•ืžืกืคืจื” ื–ื”ื” ืœืžืกืคืจ ื”ื ืกืคื—

    Item Scope

    Type

    Site Materials / Products Tested Types of Test / Properties Measured Standard / Method Opinion and

    Interpretation

    Remarks

    Group of Products: Construction Materials Raw and Products :ื—ื•ืžืจื™ื ื•ืžื•ืฆืจื™ ื‘ื ื™ื”ืžืฉืคื—ืช ืžื•ืฆืจื™ื

    Physical Testing ื‘ื“ื™ืงื•ืช ืคื™ื–ื™ืงืœื™ื•ืช

    42 A T; T1 Exterior cladding: mosaic and ceramic

    ื—ื™ืคื•ื™ ื—ื•ืฅ: ืคืกื™ืคืก ื•ืงืจืžื™ืงื”

    Installation of mosaic and ceramic flooring

    and cladding system in buildings: Exterior

    Tensile strength of the implementation layer

    in the intermediate layer (Mortar)

    ืžืขืจื›ืช ืคืกื™ืคืก ื•ืืจื™ื—ื™ ืงืจืžื™ืงื” ืœืจื™ืฆื•ืฃ ื•ืœื—ื™ืคื•ื™ ื‘ื ื™ื™ื ื™ื: ื—ื™ืคื•ื™ ื—ื•ืฅ.

    ื—ื•ื–ืง ื”ืžืชื™ื—ื” ืฉืœ ื”ืจืงืข ืื• ืฉืœ ื”ืจืงืข ื•ืฉื›ื‘ืช ื”ื‘ื™ื ื™ื™ื )ื˜ื™ื—(

    SI 1555 part 1 section

    5.2.1.2 ---

    43 A T; T1 Exterior cladding: mosaic and ceramic

    ื—ื™ืคื•ื™ ื—ื•ืฅ: ืคืกื™ืคืก ื•ืงืจืžื™ืงื”

    Installation of mosaic and ceramic flooring

    and cladding system in buildings: Exterior Adhesion strength: axle pull

    ืžืขืจื›ืช ืคืกื™ืคืก ื•ืืจื™ื—ื™ ืงืจืžื™ืงื” ืœืจื™ืฆื•ืฃ ื•ืœื—ื™ืคื•ื™ ื‘ื ื™ื™ื ื™ื: ื—ื™ืคื•ื™ ื—ื•ืฅ.

    ื—ื•ื–ืง ื” ื”ื“ื‘ืงื” ื‘ืžืฉื™ื›ื” ืฆื™ืจื™ืช

    SI 1555 part 1 section 5.2.2 ---

    44 A T; T1 Exterior cladding: mosaic and ceramic

    ื—ื™ืคื•ื™ ื—ื•ืฅ: ืคืกื™ืคืก ื•ืงืจืžื™ืงื”

    Installation of mosaic and ceramic flooring

    and cladding system in buildings: Exterior

    Adhesion strength: axle pull

    ืžืขืจื›ืช ืคืกื™ืคืก ื•ืืจื™ื—ื™ ืงืจืžื™ืงื” ืœืจื™ืฆื•ืฃ . ื‘ื ื™ื™ื ื™ื: ื—ื™ืคื•ื™ ื—ื•ืฅื•ืœื—ื™ืคื•ื™

    ื—ื•ื–ืง ื”ื”ื“ื‘ืงื” ื‘ืžืฉื™ื›ื” ืฆื™ืจื™ืช

    SI 1555 part 1 section

    5.2.1.3 ---

    45 A T; T1 Floor Coverings: Mosaic tiles made of ceramic and glass

    ืžืงืจืžื™ืงื” ืคืกื™ืคืกืจื™ืฆื•ืฃ: ืžื–ื›ื•ื›ื™ืชื•

    Installation of mosaic and ceramic flooring

    and cladding system in buildings: Exterior Axial pull tensile strength

    ืžืขืจื›ืช ืคืกื™ืคืก ื•ืืจื™ื—ื™ ืงืจืžื™ืงื” ืœืจื™ืฆื•ืฃ ื•ืœื—ื™ืคื•ื™ ื‘ื ื™ื™ื ื™ื: ื—ื™ืคื•ื™ ื—ื•ืฅ.

    ื—ื•ื–ืง ืžืชื™ื—ื” ื‘ืžืฉื™ื›ื” ืฆื™ืจื™ืช

    SI 1555 part 3 section 5.1.3 ---

    46 A T; T1 Floor Coverings: Mosaic tiles made of

    ceramic and glass

    ืžืงืจืžื™ืงื” ืคืกื™ืคืกืจื™ืฆื•ืฃ: ืžื–ื›ื•ื›ื™ืชื•

    Installation of mosaic and ceramic flooring

    and cladding system in buildings: Exterior

    Tapping test

    ืžืขืจื›ืช ืคืกื™ืคืก ื•ืืจื™ื—ื™ ืงืจืžื™ืงื” ืœืจื™ืฆื•ืฃ ื•ืœื—ื™ืคื•ื™ ื‘ื ื™ื™ื ื™ื: ื—ื™ืคื•ื™ ื—ื•ืฅ.

    ื‘ื“ื™ืงื” ื‘ื”ืงืฉื”

    SI 1555 part 3 section 5.2.3 ---

    47 A T; T1 Floor Coverings: Mosaic tiles made of

    ceramic and glass

    ืžืงืจืžื™ืงื” ืคืกื™ืคืกืจื™ืฆื•ืฃ: ืžื–ื›ื•ื›ื™ืชื•

    Installation of mosaic and ceramic flooring and cladding system in buildings: Exterior

    Axial pull adhesion strength

    ืžืขืจื›ืช ืคืกื™ืคืก ื•ืืจื™ื—ื™ ืงืจืžื™ืงื” ืœืจื™ืฆื•ืฃ ื•ืœื—ื™ืคื•ื™ ื‘ื ื™ื™ื ื™ื: ื—ื™ืคื•ื™ ื—ื•ืฅ.

    ื—ื•ื–ืง ื”ื”ื“ื‘ืงื” ื‘ืžืฉื™ื›ื” ืฆื™ืจื™ืช

    SI 1555 part 3 section 5.2.4 ---

    48 A P Natural stone cladded walls

    ื‘ืื‘ืŸ ืžื—ื•ืคื™ื ืงื™ืจื•ืช ื˜ื‘ืขื™ืช

    Bulk specific gravity )ืžืฉืงืœ ืกื’ื•ืœื™ ืžืจื—ื‘ื™ )ืžืฉืงืœ ืžืจื—ื‘ื™ SI 2378 part 1 section 6.1.3 ---

    49 A P Natural stone cladded walls

    ื‘ืื‘ืŸ ืžื—ื•ืคื™ื ืงื™ืจื•ืช ื˜ื‘ืขื™ืช

    Evaluation of durability of rock for erosion

    control under freezing and thawing

    conditions

    ืขืžื™ื“ื•ืช ื‘ื›ืคื•ืจ ื•ื”ืคืฉืจื” ืฉืœ ืื‘ืŸ ืœื—ื™ืคื•ื™ ืงื™ืจื•ืช

    ASTM-D-5312 ---

    Meet the requirement of SI

    2378 part 1 section 6.1.5

    50 A P Natural stone cladded walls

    ื‘ืื‘ืŸ ืžื—ื•ืคื™ื ืงื™ืจื•ืช ื˜ื‘ืขื™ืช

    Initial compressive strength ื—ื•ื–ืง ืชื—ื™ืœื™ ื‘ืœื—ื™ืฆื” SI 2378 part 1 section 6.1.7 ---

  • 037 Accreditation No. ISO/IEC 17025; 2005 Testing Laboratory Department:

    Schedule of Accreditation

    Site: P or T or M, P-Permanent, T-Temporary, M-Mobile

    Type of Scopes: A- Fixed, C- Flexible scope in analytical tests: Type of matrix, analytes, experimental systems and/or analytical characteristics may be subject to changes, in accordance with the laboratory's

    approved and documented procedures. For details, please refer to the list of Accredited Tests, available from the laboratory upon request.

    Date of issue 12.07.2017 Version No. 17 Page No. 10 of: 49 The certificate attached is an integral part of the schedule and is numbered identically ื”ืชืขื•ื“ื” ื”ืžืฆื•ืจืคืช ืœื ืกืคื— ื–ื” ืžื”ื•ื•ื” ื—ืœืง ื‘ืœืชื™ ื ืคืจื“ ืžืžื ื• ื•ืžืกืคืจื” ื–ื”ื” ืœืžืกืคืจ ื”ื ืกืคื—

    Item Scope

    Type

    Site Materials / Products Tested Types of Test / Properties Measured Standard / Method Opinion and

    Interpretation

    Remarks

    Group of Products: Construction Materials Raw and Products :ื—ื•ืžืจื™ื ื•ืžื•ืฆืจื™ ื‘ื ื™ื”ืžืฉืคื—ืช ืžื•ืฆืจื™ื

    Physical Testing ื‘ื“ื™ืงื•ืช ืคื™ื–ื™ืงืœื™ื•ืช

    51 A P Natural stone cladded walls

    ื‘ืื‘ืŸ ืžื—ื•ืคื™ื ืงื™ืจื•ืช ื˜ื‘ืขื™ืช

    Initial modulus of rupture ื—ื•ื–ืง ืชื—ื™ืœื™ ื‘ื›ืคื™ืคื” SI 2378 part 1 section 6.1.9 ---

    52 A P Natural stone cladded walls

    ื‘ืื‘ืŸ ืžื—ื•ืคื™ื ืงื™ืจื•ืช ื˜ื‘ืขื™ืช

    Resistance to salt crystallization ื”ืชื’ื‘ืฉื•ืช ืžืœื—ื™ื SI 2378 part 1 section 6.1.4 ---

    53 A P Natural stone cladded walls

    ื‘ืื‘ืŸ ืžื—ื•ืคื™ื ืงื™ืจื•ืช ื˜ื‘ืขื™ืช

    Water absorption ืกืคื™ื’ื•ืช ื›ื•ืœืœืช SI 2378 part 1 section 6.1.1 ---

    54 A P Natural stone cladded walls

    ื‘ืื‘ืŸ ืžื—ื•ืคื™ื ืงื™ืจื•ืช ื˜ื‘ืขื™ืช

    Water absorption by capillarity ืกืคื™ื’ื•ืช ื ื™ืžื™ืช SI 2378 part 1 section 6.1.2 ---

    55 A P Prefabricated concrete products for paving

    ืžื•ืฆืจื™ ื‘ื˜ื•ืŸ ื˜ืจื•ืžื™ื™ื ืœืจื™ืฆื•ืฃ

    All activities specified in the standard ื‘ืชืงืŸ ื•ืชื”ืžืคื•ืจื˜ื”ืฉื™ื˜ื•ืช SI 8 ---

    56 A P Screws ื‘ืจื’ื™ื Mechanical properties(Strength) )ืžืืคื™ื™ื ื™ื ืžื›ื ื™ื™ื )ื—ื•ื–ืง SI 1225 part 1 section 3.2.1 ---

    57 A P Slabs for stairs surfacing: Natural stone

    slabs

    ืœื•ื—ื•ืช ืœื—ื™ืคื•ื™ ืžื“ืจื’ื•ืช: ืœื•ื—ื•ืช ืžืื‘ืŸ ื˜ื‘ืขื™ืช

    Determination abrasion value ืงื‘ื™ืขืช ืฉื™ืขื•ืจ ื”ืฉื—ื™ืงื” SI 1554 part 2 section 3.8 ---

    58 A P Steel for the reinforcement of

    concrete: Ribbed bars

    ืคืœื“ื” ืœื–ื™ื•ืŸ ื‘ื˜ื•ืŸ: ืžื•ื˜ื•ืช ืžืฆื•ืœืขื™ื

    Bending and rebending strength ื›ืคื™ืคื” ื•ื›ืคื™ืคื” ื—ื•ื–ืจืช SI 4466 part 3 section 303 ---

    59 A P Steel for the reinforcement of

    concrete: Ribbed bars

    ืคืœื“ื” ืœื–ื™ื•ืŸ ื‘ื˜ื•ืŸ: ืžื•ื˜ื•ืช ืžืฆื•ืœืขื™ื

    Defects ืคื’ืžื™ื SI 4466 part 3 section 109 ---

    60 A P Steel for the reinforcement of

    concrete: Ribbed bars

    ืคืœื“ื” ืœื–ื™ื•ืŸ ื‘ื˜ื•ืŸ: ืžื•ื˜ื•ืช ืžืฆื•ืœืขื™ื

    Shape ืฆื•ืจื” SI 4466 part 3 section 301.1 ---

    ื‘ื“ื™ืงืช ื›ืคื™ืคื” ื‘ืœื‘ื“ ืœืœื ื‘ื“ื™ืงืช ื›ืคื™ืคื” ื—ื•ื–ืจืช.

  • 037 Accreditation No. ISO/IEC 17025; 2005 Testing Laboratory Department:

    Schedule of Accreditation

    Site: P or T or M, P-Permanent, T-Temporary, M-Mobile

    Type of Scopes: A- Fixed, C- Flexible scope in analytical tests: Type of matrix, analytes, experimental systems and/or analytical characteristics may be subject to changes, in accordance with the laboratory's

    approved and documented procedures. For details, please refer to the list of Accredited Tests, available from the laboratory upon request.

    Date of issue 12.07.2017 Version No. 17 Page No. 11 of: 49 The certificate attached is an integral part of the schedule and is numbered identically ื”ืชืขื•ื“ื” ื”ืžืฆื•ืจืคืช ืœื ืกืคื— ื–ื” ืžื”ื•ื•ื” ื—ืœืง ื‘ืœืชื™ ื ืคืจื“ ืžืžื ื• ื•ืžืกืคืจื” ื–ื”ื” ืœืžืกืคืจ ื”ื ืกืคื—

    Item Scope

    Type

    Site Materials / Products Tested Types of Test / Properties Measured Standard / Method Opinion and

    Interpretation

    Remarks

    Group of Products: Construction Materials Raw and Products :ื—ื•ืžืจื™ื ื•ืžื•ืฆืจื™ ื‘ื ื™ื”ืžืฉืคื—ืช ืžื•ืฆืจื™ื

    Physical Testing ื‘ื“ื™ืงื•ืช ืคื™ื–ื™ืงืœื™ื•ืช

    61 A P Steel for the reinforcement of

    concrete: Ribbed bars

    ืคืœื“ื” ืœื–ื™ื•ืŸ ื‘ื˜ื•ืŸ: ืžื•ื˜ื•ืช ืžืฆื•ืœืขื™ื

    Tensile strength ื—ื•ื–ืง ื”ืžืชื™ื—ื” SI 4466 part 3 section 302 ---

    62 A P Terrazzo floor tiles ืืจื™ื—ื™ ืจืฆืคื” ืžื˜ืจืืฆื• Abrasion value ืฉื™ืขื•ืจ ื”ืฉื—ื™ืงื” SI 6 section 3.8 ---

  • 037 Accreditation No. ISO/IEC 17025; 2005 Testing Laboratory Department:

    Schedule of Accreditation

    Site: P or T or M, P-Permanent, T-Temporary, M-Mobile

    Type of Scopes: A- Fixed, C- Flexible scope in analytical tests: Type of matrix, analytes, experimental systems and/or analytical characteristics may be subject to changes, in accordance with the laboratory's

    approved and documented procedures. For details, please refer to the list of Accredited Tests, available from the laboratory upon request.

    Date of issue 12.07.2017 Version No. 17 Page No. 12 of: 49 The certificate attached is an integral part of the schedule and is numbered identically ื”ืชืขื•ื“ื” ื”ืžืฆื•ืจืคืช ืœื ืกืคื— ื–ื” ืžื”ื•ื•ื” ื—ืœืง ื‘ืœืชื™ ื ืคืจื“ ืžืžื ื• ื•ืžืกืคืจื” ื–ื”ื” ืœืžืกืคืจ ื”ื ืกืคื—

    Item Scope

    Type

    Site Materials / Products Tested Types of Test / Properties Measured Standard / Method Opinion and

    Interpretation

    Remarks

    Group of products: Cosmetic :ืงื•ืกืžื˜ื™ืงื” ืžืฉืคื—ืช ืžื•ืฆืจื™ื

    Biological Testing, Bacteria, Fungi and Yeast, Count, Classification and Identification ,ืกืคื™ืจื”, ืžื™ื•ืŸ ื•ื–ื™ื”ื•ื™ ื‘ื“ื™ืงื•ืช ื‘ื™ื•ืœื•ื’ื™ื•ืช, ื—ื™ื™ื“ืงื™ื ืคื˜ืจื™ื•ืช ื•ืฉืžืจื™ื

    63 A P6 Cosmetic Products ืžื•ืฆืจื™ ืงื•ืกืžื˜ื™ืงื” Total count of aerobic microorganisms

    ืกืคื™ืจื” ื›ืœืœื™ืช ืฉืœ ืžื™ืงืจื•ืื•ืจื’ื ื™ื–ืžื™ื ืื™ืจื•ื‘ื™ื™ื

    FDA BAM Chapter 23 ---

    64 A P6 Cosmetic Products ืžื•ืฆืจื™ ืงื•ืกืžื˜ื™ืงื” Yeast and mold ืฉืžืจื™ื ื•ืขื•ื‘ืฉ FDA BAM Chapter 23 ---

  • 037 Accreditation No. ISO/IEC 17025; 2005 Testing Laboratory Department:

    Schedule of Accreditation

    Site: P or T or M, P-Permanent, T-Temporary, M-Mobile

    Type of Scopes: A- Fixed, C- Flexible scope in analytical tests: Type of matrix, analytes, experimental systems and/or analytical characteristics may be subject to changes, in accordance with the laboratory's

    approved and documented procedures. For details, please refer to the list of Accredited Tests, available from the laboratory upon request.

    Date of issue 12.07.2017 Version No. 17 Page No. 13 of: 49 The certificate attached is an integral part of the schedule and is numbered identically ื”ืชืขื•ื“ื” ื”ืžืฆื•ืจืคืช ืœื ืกืคื— ื–ื” ืžื”ื•ื•ื” ื—ืœืง ื‘ืœืชื™ ื ืคืจื“ ืžืžื ื• ื•ืžืกืคืจื” ื–ื”ื” ืœืžืกืคืจ ื”ื ืกืคื—

    Item Scope

    Type

    Site Materials / Products Tested Types of Test / Properties Measured Standard / Method Opinion and

    Interpretation

    Remarks

    Group of products: Cosmetic :ืงื•ืกืžื˜ื™ืงื” ืžืฉืคื—ืช ืžื•ืฆืจื™ื

    Chemical Testing, Classical Chemistry ื‘ื“ื™ืงื•ืช ื›ื™ืžื™ื•ืช, ื›ื™ืžื™ื” ืงืœืืกื™ืช

    65 A P6 Cosmetic Products ืžื•ืฆืจื™ ืงื•ืกืžื˜ื™ืงื” pH pH USP 36, Chapter 791 --- USP= U.S. Pharmacopeia

  • 037 Accreditation No. ISO/IEC 17025; 2005 Testing Laboratory Department:

    Schedule of Accreditation

    Site: P or T or M, P-Permanent, T-Temporary, M-Mobile

    Type of Scopes: A- Fixed, C- Flexible scope in analytical tests: Type of matrix, analytes, experimental systems and/or analytical characteristics may be subject to changes, in accordance with the laboratory's

    approved and documented procedures. For details, please refer to the list of Accredited Tests, available from the laboratory upon request.

    Date of issue 12.07.2017 Version No. 17 Page No. 14 of: 49 The certificate attached is an integral part of the schedule and is numbered identically ื”ืชืขื•ื“ื” ื”ืžืฆื•ืจืคืช ืœื ืกืคื— ื–ื” ืžื”ื•ื•ื” ื—ืœืง ื‘ืœืชื™ ื ืคืจื“ ืžืžื ื• ื•ืžืกืคืจื” ื–ื”ื” ืœืžืกืคืจ ื”ื ืกืคื—

    Item Scope

    Type

    Site Materials / Products Tested Types of Test / Properties Measured Standard / Method Opinion and

    Interpretation

    Remarks

    Group of Products: Engineering Items - Buildings, Constructions, Infrastructure and

    Concrete

    ืžื‘ื ื™ื, ืชืฉืชื™ื•ืช ื•ื‘ื˜ื•ืŸ -ืคืจื™ื˜ื™ื ื”ื ื“ืกื™ื™ืืžืฉืคื—ืช ืžื•ืฆืจื™ื:

    Non Destructive Testing ื‘ื“ื™ืงื•ืช ืœื ื”ื•ืจืกื•ืช

    66 A P;T; P2;T2; P4;T4

    Hardened concrete ื‘ื˜ื•ืŸ ืงืฉื•ื™ Testing of surface hardness using a rebound hammer

    ื‘ื“ื™ืงืช ืงืฉื™ื•ืช ืฉื˜ื— ื”ืคื ื™ื ื‘ืืžืฆืขื•ืช ืคื˜ื™ืฉ ืจืชืข

    SI 26 part 7 section 201 ---

    Based on: Schmidt method

    67 A P;T Piles ื›ืœื•ื ืกืื•ืช Integrity testing by ultrasonic crosshole testing

    -ื‘ื“ื™ืงืช ืจืฆื™ืคื•ืช ื‘ืฉื™ื˜ื” ืขืœ ืื•ืœื˜ืจืกื•ื ื™ืช(ืงื•ืœื™ืช )

    ASTM-D-6760 ---

    68 A P;T Piles ื›ืœื•ื ืกืื•ืช Low strain integrity testing ื‘ื“ื™ืงืช ืจืฆื™ืคื•ืช ื‘ืฉื™ื˜ื” ื”ื“- ืงื•ืœื™ืช )ืกื•ื ื™ืช(

    ASTM-D-5882 ---

    PEM only

  • 037 Accreditation No. ISO/IEC 17025; 2005 Testing Laboratory Department:

    Schedule of Accreditation

    Site: P or T or M, P-Permanent, T-Temporary, M-Mobile

    Type of Scopes: A- Fixed, C- Flexible scope in analytical tests: Type of matrix, analytes, experimental systems and/or analytical characteristics may be subject to changes, in accordance with the laboratory's

    approved and documented procedures. For details, please refer to the list of Accredited Tests, available from the laboratory upon request.

    Date of issue 12.07.2017 Version No. 17 Page No. 15 of: 49 The certificate attached is an integral part of the schedule and is numbered identically ื”ืชืขื•ื“ื” ื”ืžืฆื•ืจืคืช ืœื ืกืคื— ื–ื” ืžื”ื•ื•ื” ื—ืœืง ื‘ืœืชื™ ื ืคืจื“ ืžืžื ื• ื•ืžืกืคืจื” ื–ื”ื” ืœืžืกืคืจ ื”ื ืกืคื—

    Item Site Site Materials / Products Tested Types of Test / Properties Measured Standard / Method Opinion and

    Interpretation

    Remarks

    Group of Products: Engineering Items - Buildings, Constructions, Infrastructure and

    Concrete

    ืžื‘ื ื™ื, ืชืฉืชื™ื•ืช ื•ื‘ื˜ื•ืŸ -ืคืจื™ื˜ื™ื ื”ื ื“ืกื™ื™ื ืžืฉืคื—ืช ืžื•ืฆืจื™ื:

    Physical and Engineering Testing ื‘ื“ื™ืงื•ืช ืคื™ื–ื™ืงืœื™ื•ืช ื•ื”ื ื“ืกื™ื•ืช

    69 A T Basketball equipment ืžืชืงื ื™ ื›ื“ื•ืจืกืœ Functional and safety requirements and test methods โ€“ Installation only

    ื“ืจื™ืฉื•ืช ืชืคืงื•ื“ ื•ื‘ื˜ื™ื—ื•ืช ื•ืฉื™ื˜ื•ืช ื”ืชืงื ื” ื‘ืœื‘ื“ -ื‘ื“ื™ืงื”

    SI 5515part 1

    Excluding chapter 5.3 ---

    70 A T Gymnastic equipment - Ladders

    โ€“ืฆื™ื•ื“ ื”ืชืขืžืœื•ืช ืกื•ืœืžื•ืช

    Safety requirements and test

    methods.

    ื“ืจื™ืฉื•ืช ืชืคืงื•ื“ ื•ื‘ื˜ื™ื—ื•ืช ื•ืฉื™ื˜ื•ืช .ื‘ื“ื™ืงื”

    SI 5515part 3

    Excluding chapter 5.1 ---

    71 A T Gymnastic equipment โ€“ Rings ื˜ื‘ืขื•ืช โ€“ืฆื™ื•ื“ ื”ืชืขืžืœื•ืช Functional and safety requirements and test methods

    ื“ืจื™ืฉื•ืช ืชืคืงื•ื“ ื•ื‘ื˜ื™ื—ื•ืช ื•ืฉื™ื˜ื•ืช .ื‘ื“ื™ืงื”

    SI 5515part 4

    Excluding chapter 6.2.2 ---

    72 A T Soccer Goals ืฉืขืจื™ ืงื˜ ืจื’ืœ Safety requirements and test methods.

    SI 5515 ื“ืจื™ืฉื•ืช ื‘ื˜ื™ื—ื•ืชAustralian competition & consumer commission โ€“ movable soccer goals

    safety.

    ---

    73 A T Suspended detachable ceiling ืชืงืจื•ืช ืชื•ืชื‘ ืคืจื™ืงื•ืช Code of practice for the design and installation in shelters and protected areas - Installation test only

    ื›ืœืœื™ ืชื›ืŸ ื•ื”ืชืงื ื” ื‘ืžืงืœื˜ื™ื ื‘ื“ื™ืงื•ืช -ื•ืžืจื—ื‘ื™ื ืžื•ื’ื ื™ื

    ื”ืชืงื ื” ื‘ืœื‘ื“

    SI 5103 part 4 ---

    74 A T Suspended detachable ceiling ืคืจื™ืงื•ืชืชืงืจื•ืช ืชื•ืชื‘ Specification for performance of components and assemblies

    ื“ืจื™ืฉื•ืช ืชืคืงื•ื“ ืฉืœ ืจื›ื™ื‘ื™ื ื•ืžื›ืœื•ืœื™ื

    SI 5103 part 3 section 8 ---

    Meet the requirement of

    SI 5103 part 2

  • 037 Accreditation No. ISO/IEC 17025; 2005 Testing Laboratory Department:

    Schedule of Accreditation

    Site: P or T or M, P-Permanent, T-Temporary, M-Mobile

    Type of Scopes: A- Fixed, C- Flexible scope in analytical tests: Type of matrix, analytes, experimental systems and/or analytical characteristics may be subject to changes, in accordance with the laboratory's

    approved and documented procedures. For details, please refer to the list of Accredited Tests, available from the laboratory upon request.

    Date of issue 12.07.2017 Version No. 17 Page No. 16 of: 49 The certificate attached is an integral part of the schedule and is numbered identically ื”ืชืขื•ื“ื” ื”ืžืฆื•ืจืคืช ืœื ืกืคื— ื–ื” ืžื”ื•ื•ื” ื—ืœืง ื‘ืœืชื™ ื ืคืจื“ ืžืžื ื• ื•ืžืกืคืจื” ื–ื”ื” ืœืžืกืคืจ ื”ื ืกืคื—

    Item Scope

    Type

    Site Materials / Products Tested Types of Test / Properties Measured Standard / Method Opinion and

    Interpretation

    Remarks

    Group of Products: Engineering Items, Non Destructive Test (NDT) :ืคืจื™ื˜ื™ื ื”ื ื“ืกื™ื™ื, ื‘ื“ื™ืงื•ืช ืœื ื”ื•ืจืกื•ืช )ืžืฉืคื—ืช ืžื•ืฆืจื™ืNDT)

    Industrial Products โ€“ Magnetic Particle Testing ื‘ื“ื™ืงื•ืช ื—ืœืงื™ืงื™ื ืžื’ื ื˜ื™ื™ื , ืžื•ืฆืจื™ ืชืขืฉื™ื™ื”

    75 A P; T Ferromagnetic metals ืžืชื›ื•ืช ืคืจื•ืžื’ื ื˜ื™ื•ืช Magnetic particle examination

    ASTM E 1444/1444M - 11 ื‘ื“ื™ืงืช ื—ืœืงื™ืงื™ื ืžื’ื ื˜ื™ื™ื---

    76 A P; T Ferromagnetic metals ืžืชื›ื•ืช ืคืจื•ืžื’ื ื˜ื™ื•ืช Magnetic particle examination

    ASTM-E-709 ื‘ื“ื™ืงืช ื—ืœืงื™ืงื™ื ืžื’ื ื˜ื™ื™ื---

    Item Scope

    Type

    Site Materials / Products Tested Types of Test / Properties Measured Standard / Method Opinion and

    Interpretation

    Remarks

    Group of Products: Engineering Items, Non Destructive Test (NDT) :ื‘ื“ื™ืงื•ืช ืœื ื”ื•ืจืกื•ืช )ืคืจื™ื˜ื™ื ื”ื ื“ืกื™ื™ื, ืžืฉืคื—ืช ืžื•ืฆืจื™ืNDT)

    Industrial Products, Penetrant Testing ,ื—ื•ืžืจื™ื ื—ื•ื“ืจื™ืืžื•ืฆืจื™ ืชืขืฉื™ื™ื”

    77 A P; T Light and dense metals including castings, forgings, pipelines, machined parts

    and weldments including

    aerospace structures components

    ืžืชื›ื•ืช ืงืœื•ืช ื•ื›ื‘ื“ื•ืช ื›ื•ืœืœ ื™ืฆื™ืงื•ืช, ื—ื™ืฉื•ืœื™ื, ืฆื ืจืช,

    ื—ื•ืžืจื™ื ืžืขื•ื‘ื“ื™ื, ืจื™ืชื•ื›ื™ื ื•ืจื›ื™ื‘ื™ ืžื‘ื ื™ื ืชืขื•ืคืชื™ื™ื

    Liquid penetrant examination ื‘ื“ื™ืงืช ื ื•ื–ืœื™ื ื—ื•ื“ืจื™ื ASTM-E-1417 --- Meets requirements regarding the materials/products tested as in: SI 1225 section 11.9.6, SI 127 part 1 section 7.4,

    AWS D1.1

    AWS = American Welding Society

    78 A P; T Light and dense metals including castings, forgings,

    pipelines, machined parts and weldments

    ืžืชื›ื•ืช ืงืœื•ืช ื•ื›ื‘ื“ื•ืช ื›ื•ืœืœ ื™ืฆื™ืงื•ืช, ื—ื™ืฉื•ืœื™ื, ืฆื ืจืช,

    ื—ื•ืžืจื™ื ืžืขื•ื‘ื“ื™ื ื•ืจื™ืชื•ื›ื™ื

    Liquid penetrant examination ื‘ื“ื™ืงืช ื ื•ื–ืœื™ื ื—ื•ื“ืจื™ื ASTM-E-165 --- Meets requirements regarding the materials/products tested as in: SI 1225

    section 11.9.6, SI 127 part 1 section 7.4, AWS D1.1

    79 A P; T Light and dense metals including castings, forgings,

    pipelines, machined parts and weldments

    ืžืชื›ื•ืช ืงืœื•ืช ื•ื›ื‘ื“ื•ืช ื›ื•ืœืœ ื™ืฆื™ืงื•ืช, ื—ื™ืฉื•ืœื™ื, ืฆื ืจืช,

    ื—ื•ืžืจื™ื ืžืขื•ื‘ื“ื™ื ื•ืจื™ืชื•ื›ื™ื

    Fluorescent penetrant

    examination using the solvent

    removable process

    ื‘ื“ื™ืงืช ื ื•ื–ืœื™ื ื—ื•ื“ืจื™ื ื‘ืชื”ืœื™ืš ื™ืืคืœื•ืื•ืจืกืฆื ื˜ ื”ืกืจื” ื‘ืžืžืก

    ASTM-E-1219 --- Meets requirements regarding the

    materials/products tested as in: SI 1225

    section 11.9.6, SI 127 part 1 section 7.4, AWS D1.1

  • 037 Accreditation No. ISO/IEC 17025; 2005 Testing Laboratory Department:

    Schedule of Accreditation

    Site: P or T or M, P-Permanent, T-Temporary, M-Mobile

    Type of Scopes: A- Fixed, C- Flexible scope in analytical tests: Type of matrix, analytes, experimental systems and/or analytical characteristics may be subject to changes, in accordance with the laboratory's

    approved and documented procedures. For details, please refer to the list of Accredited Tests, available from the laboratory upon request.

    Date of issue 12.07.2017 Version No. 17 Page No. 17 of: 49 The certificate attached is an integral part of the schedule and is numbered identically ื”ืชืขื•ื“ื” ื”ืžืฆื•ืจืคืช ืœื ืกืคื— ื–ื” ืžื”ื•ื•ื” ื—ืœืง ื‘ืœืชื™ ื ืคืจื“ ืžืžื ื• ื•ืžืกืคืจื” ื–ื”ื” ืœืžืกืคืจ ื”ื ืกืคื—

    Item Scope

    Type

    Site Materials / Products Tested Types of Test / Properties Measured Standard / Method Opinion and

    Interpretation

    Remarks

    Group of Products: Engineering Items, Non Destructive Test (NDT) :ื‘ื“ื™ืงื•ืช ืœื ื”ื•ืจืกื•ืช )ืคืจื™ื˜ื™ื ื”ื ื“ืกื™ื™ื, ืžืฉืคื—ืช ืžื•ืฆืจื™ืNDT)

    Industrial Products, Penetrant Testing ,ื—ื•ืžืจื™ื ื—ื•ื“ืจื™ืืžื•ืฆืจื™ ืชืขืฉื™ื™ื”

    80 A P; T Light and dense metals including castings, forgings,

    pipelines, machined parts and weldments

    ืžืชื›ื•ืช ืงืœื•ืช ื•ื›ื‘ื“ื•ืช ื›ื•ืœืœ ื™ืฆื™ืงื•ืช, ื—ื™ืฉื•ืœื™ื, ืฆื ืจืช,

    ื—ื•ืžืจื™ื ืžืขื•ื‘ื“ื™ื ื•ืจื™ืชื•ื›ื™ื

    Visible penetrant

    examination using the solvent

    removable process

    ื‘ื“ื™ืงืช ื ื•ื–ืœื™ื ื—ื•ื“ืจื™ื ื‘ืื•ืจ ื ืจืื” ื‘ืชื”ืœื™ืš ื”ืกืจื” ื‘ืžืžืก

    ASTM-E-1220 --- Meets requirements regarding the materials/products tested as in: SI 1225

    section 11.9.6, SI 127 part 1 section 7.4, AWS D1.1

    Item Scope

    Type

    Site Materials / Products Tested Types of Test / Properties Measured Standard / Method Opinion and

    Interpretation

    Remarks

    Group of Products: Engineering Items, Non Destructive Test (NDT) :ืคืจื™ื˜ื™ื ื”ื ื“ืกื™ื™ื, ื‘ื“ื™ืงื•ืช ืœื ื”ื•ืจืกื•ืช )ืžืฉืคื—ืช ืžื•ืฆืจื™ืNDT)

    Industrial Products, Radiographic testing: X and Gamma rays ,ื‘ื“ื™ืงื•ืช ืจื“ื™ื•ื’ืจืคื™ื•ืช: ืงืจื ื™ ืžื•ืฆืจื™ ืชืขืฉื™ื™ื”X ื’ืžื

    81 C P;T Light and dense metals including castings, forgings, pipelines, machined parts and welds, buildings, concrete

    materials and Infrastructures

    ืžืชื›ื•ืช ืงืœื•ืช ื•ื›ื‘ื“ื•ืช ื›ื•ืœืœ ื™ืฆื™ืงื•ืช, ื—ื™ืฉื•ืœื™ื, ืฆื ืจืช, ื—ื•ืžืจื™ื ืžืขื•ื‘ื“ื™ื, ืจื™ืชื•ื›ื™ื ื•ืžื‘ื ื™ื

    ืชืขื•ืคืชื™ื™ื, ืžื‘ื ื™ื, ื—ื•ืžืจื™ื ื‘ื˜ื•ื ื™ื™ื ื•ืชืฉืชื™ื•ืช

    Radiographic

    examination

    ASTM-E-1742 ื‘ื“ื™ืงื•ืช ืจื“ื™ื•ื’ืจืคื™ื•ืช

    ---

    82 C P;T Light and dense metals including castings and welds

    Radiographic ืžืชื›ื•ืช ืงืœื•ืช ื•ื›ื‘ื“ื•ืช ื›ื•ืœืœ ื™ืฆื™ืงื•ืช ื•ืจื™ืชื•ื›ื™ืexamination

    ASTM-E-94 ื‘ื“ื™ืงื•ืช ืจื“ื™ื•ื’ืจืคื™ื•ืช---

    83 C P;T Light and dense metals including castings

    Radiographic ื•ื›ื‘ื“ื•ืช ื›ื•ืœืœ ื™ืฆื™ืงื•ืชืžืชื›ื•ืช ืงืœื•ืช examination

    ASTM-E-1030 ื‘ื“ื™ืงื•ืช ืจื“ื™ื•ื’ืจืคื™ื•ืช---

    84 C P;T Light and dense metals including welds ืžืชื›ื•ืช ืงืœื•ืช ื•ื›ื‘ื“ื•ืช ื›ื•ืœืœ ืจื™ืชื•ื›ื™ื Radiographic examination

    ื‘ื“ื™ืงื•ืช ืจื“ื™ื•ื’ืจืคื™ื•ืช

    ASTM-E-1032 ---

    85 C P;T Light and dense metals including castings, forgings, pipelines, machined parts and weldments, buildings,

    concrete materials and Infrastructures

    ืžืชื›ื•ืช ืงืœื•ืช ื•ื›ื‘ื“ื•ืช ื›ื•ืœืœ ื™ืฆื™ืงื•ืช, ื—ื™ืฉื•ืœื™ื, ืฆื ืจืช, ื—ื•ืžืจื™ื ืžืขื•ื‘ื“ื™ื, ืจื™ืชื•ื›ื™ื ,ืžื‘ื ื™ื,

    ื—ื•ืžืจื™ื ื‘ื˜ื•ื ื™ื™ื ื•ืชืฉืชื™ื•ืช.

    Radiographic

    examination

    AWS D1.1 ื“ื™ื•ื’ืจืคื™ื•ืชื‘ื“ื™ืงื•ืช ืจ

    ---

  • 037 Accreditation No. ISO/IEC 17025; 2005 Testing Laboratory Department:

    Schedule of Accreditation

    Site: P or T or M, P-Permanent, T-Temporary, M-Mobile

    Type of Scopes: A- Fixed, C- Flexible scope in analytical tests: Type of matrix, analytes, experimental systems and/or analytical characteristics may be subject to changes, in accordance with the laboratory's

    approved and documented procedures. For details, please refer to the list of Accredited Tests, available from the laboratory upon request.

    Date of issue 12.07.2017 Version No. 17 Page No. 18 of: 49 The certificate attached is an integral part of the schedule and is numbered identically ื”ืชืขื•ื“ื” ื”ืžืฆื•ืจืคืช ืœื ืกืคื— ื–ื” ืžื”ื•ื•ื” ื—ืœืง ื‘ืœืชื™ ื ืคืจื“ ืžืžื ื• ื•ืžืกืคืจื” ื–ื”ื” ืœืžืกืคืจ ื”ื ืกืคื—

    Item Scope

    Type

    Site Materials / Products Tested Types of Test / Properties Measured Standard / Method Opinion and

    Interpretation

    Remarks

    Group of Products: Engineering Items, Non Destructive Test (NDT) :ื”ื ื“ืกื™ื™ื, ื‘ื“ื™ืงื•ืช ืœื ื”ื•ืจืกื•ืช )ืคืจื™ื˜ื™ื ืžืฉืคื—ืช ืžื•ืฆืจื™ืNDT)

    Industrial Products, Ultrasonic Testing ,ื‘ื“ื™ืงื•ืช ืื•ืœื˜ืจืกื•ื ื™ื•ืชืžื•ืฆืจื™ ืชืขืฉื™ื™ื”

    86 A P;T Bridge welding ืจื™ืชื•ื›ื™ ื’ืฉืจื™ื Nondestructive examination ื‘ื“ื™ืงื•ืช ืืœ ื”ืจืก AWS D1.5 --

    87 A P;T Light and dense metals including castings, forgings

    and weldments

    ืžืชื›ื•ืช ืงืœื•ืช ื•ื›ื‘ื“ื•ืช ื›ื•ืœืœ ื™ืฆื™ืงื•ืช, ื—ื™ืฉื•ืœื™ื ื•ืจื™ืชื•ื›ื™ื

    Nondestructive examination ื‘ื“ื™ืงื•ืช ืืœ ื”ืจืก ASME V articles 4 --- ASME= American Society of Mechanical Engineering

    In the frequency range:

    20 kHz โ€“ 20 MHz

    88 A P;T Light and dense metals including castings, forgings

    and welds including

    aerospace structures

    components

    ื›ื•ืœืœืžืชื›ื•ืช ืงืœื•ืช ื•ื›ื‘ื“ื•ืช ื™ืฆื™ืงื•ืช, ื—ื™ืฉื•ืœื™ื, ืจื™ืชื•ื›ื™ื

    ื•ืจื›ื™ื‘ื™ ืžื‘ื ื™ื ืชืขื•ืคืชื™ื™ื

    Measuring thickness by

    manual ultrasonic pulse-echo

    contact method

    ื” ืงื‘ื™ืขืช ืขื•ื‘ื™ ื‘ืฉื™ื˜ื”ืื•ืœื˜ืจืกื•ื ื™ืช ื‘ืžื’ืข ื‘ื˜ื›ื ื™ืงืช

    ืืงื•-ืคื•ืœืก

    ASTM-E-797

    ---

    In the frequency range:

    100 kHz โ€“ 25 MHz

    89 A P;T Structural welding steel ืจื™ืชื•ื›ื™ ืงื•ื ืกื˜ืจื•ืงืฆื™ื•ืช ืคืœื“ื” Nondestructive examination ื‘ื“ื™ืงื•ืช ืืœ ื”ืจืก AWS D1.1 --

    90 A P;T Welding pipelines and related facilities

    --- API 1104 part 9 ื‘ื“ื™ืงื•ืช ืืœ ื”ืจืก Nondestructive examination ืจื™ืชื•ื›ื™ ืฆื ืจืช ื•ืžืชืงื ื™ื

    Item Scope

    Type

    Site Materials / Products Tested Types of Test / Properties Measured Standard / Method Opinion and

    Interpretation

    Remarks

    Group of products: Engineering items , Non destructive test (NDT) :ืคืจื™ื˜ื™ื ื”ื ื“ืกื™ื™ื, ื‘ื“ื™ืงื•ืช ืœื ื”ื•ืจืกื•ืช )ืžืฉืคื—ืช ืžื•ืฆืจื™ืNDT)

    Pressure vessel and piping, Radiographic testing: x and Gamma rays ืžื™ื›ืœื™ื ื•ืฆื ืจืช ืœื—ืฅ, ื‘ื“ื™ืงื•ืช ืจื“ื™ื•ื’ืจืคื™ื•ืช: ืงืจื ื™X ื•ื’ืžื

    91 C P;T Light and dense metals including castings and welds

    ืžืชื›ื•ืช ืงืœื•ืช ื•ื›ื‘ื“ื•ืช ื›ื•ืœืœ ื™ืฆื™ืงื•ืช ื•ืจื™ืชื•ื›ื™ื

    Nondestructive examination ื‘ื“ื™ืงื•ืช ืืœ ื”ืจืก ASME V article 2 ---

    92 C T Welding pipelines and related facilities

    API 1104 part 9 ื‘ื“ื™ืงื•ืช ืืœ ื”ืจืก Nondestructive examination ืจื™ืชื•ื›ื™ ืฆื ืจืช ื•ืžืชืงื ื™ื---

    API= American Petroleum Institute

  • 037 Accreditation No. ISO/IEC 17025; 2005 Testing Laboratory Department:

    Schedule of Accreditation

    Site: P or T or M, P-Permanent, T-Temporary, M-Mobile

    Type of Scopes: A- Fixed, C- Flexible scope in analytical tests: Type of matrix, analytes, experimental systems and/or analytical characteristics may be subject to changes, in accordance with the laboratory's

    approved and documented procedures. For details, please refer to the list of Accredited Tests, available from the laboratory upon request.

    Date of issue 12.07.2017 Version No. 17 Page No. 19 of: 49 The certificate attached is an integral part of the schedule and is numbered identically ื”ืชืขื•ื“ื” ื”ืžืฆื•ืจืคืช ืœื ืกืคื— ื–ื” ืžื”ื•ื•ื” ื—ืœืง ื‘ืœืชื™ ื ืคืจื“ ืžืžื ื• ื•ืžืกืคืจื” ื–ื”ื” ืœืžืกืคืจ ื”ื ืกืคื—

    Item Scope

    Type

    Site Materials / Products Tested Types of Test / Properties Measured Standard / Method Opinion and

    Interpretation

    Remarks

    Group of products: Food, Water and Beverages :ืžื–ื•ืŸ, ืžื™ื ื•ืžืฉืงืื•ืชืžืฉืคื—ืช ืžื•ืฆืจื™ื

    Biological Testing, Bacteria, Fungi and Yeast, Count, Classification and Identification ,ืกืคื™ืจื”, ืžื™ื•ืŸ ื•ื–ื™ื”ื•ื™ ื‘ื“ื™ืงื•ืช ื‘ื™ื•ืœื•ื’ื™ื•ืช, ื—ื™ื™ื“ืงื™ื ืคื˜ืจื™ื•ืช ื•ืฉืžืจื™ื

    93 A P6 Foodstuffs as detailed in the specific standards listed in this scope

    ืžื•ืฆืจื™ ืžื–ื•ืŸ ื›ืžืคื•ืจื˜ ื‘ืชืงื ื™ื ืกืคืฆื™ืคื™ื™ื ื”ืžืคื•ืจื˜ื™ื ื‘ื”ื™ืงืฃ ื–ื”

    Total count of aerobic

    microorganisms

    ืกืคื™ืจื” ื›ืœืœื™ืช ืฉืœ ืžื™ืงืจื•ืื•ืจื’ื ื™ื–ืžื™ื

    ืื™ืจื•ื‘ื™ื™ื

    SI 885 part 3 ---

    94 A P6 Foodstuffs as detailed in the specific standards listed in this scope

    ื‘ืชืงื ื™ื ืžื•ืฆืจื™ ืžื–ื•ืŸ ื›ืžืคื•ืจื˜ ืกืคืฆื™ืคื™ื™ื ื”ืžืคื•ืจื˜ื™ื ื‘ื”ื™ืงืฃ ื–ื”

    Yeast and mold ืฉืžืจื™ื ื•ืขื•ื‘ืฉ SI 885 part 8 ---

  • 037 Accreditation No. ISO/IEC 17025; 2005 Testing Laboratory Department:

    Schedule of Accreditation

    Site: P or T or M, P-Permanent, T-Temporary, M-Mobile

    Type of Scopes: A- Fixed, C- Flexible scope in analytical tests: Type of matrix, analytes, experimental systems and/or analytical characteristics may be subject to changes, in accordance with the laboratory's

    approved and documented procedures. For details, please refer to the list of Accredited Tests, available from the laboratory upon request.

    Date of issue 12.07.2017 Version No. 17 Page No. 20 of: 49 The certificate attached is an integral part of the schedule and is numbered identically ื”ืชืขื•ื“ื” ื”ืžืฆื•ืจืคืช ืœื ืกืคื— ื–ื” ืžื”ื•ื•ื” ื—ืœืง ื‘ืœืชื™ ื ืคืจื“ ืžืžื ื• ื•ืžืกืคืจื” ื–ื”ื” ืœืžืกืคืจ ื”ื ืกืคื—

    Item Scope

    Type

    Site Materials / Products Tested Types of Test / Properties Measured Standard / Method Opinion and

    Interpretation

    Remarks

    Group of products: Fuels, Oils and Bitumens :ื“ืœืงื™ื, ืฉืžื ื™ื ื•ื‘ื™ื˜ื•ืžื ื™ืืžืฉืคื—ืช ืžื•ืฆืจื™ื

    Chemical Testing, Classical Chemistry, Wet chemistry measurements ืžื“ื™ื“ื•ืช ื›ื™ืžื™ื” ืจื˜ื•ื‘ื”, ื‘ื“ื™ืงื•ืช ื›ื™ืžื™ื•ืช, ื›ื™ืžื™ื” ืงืœืืกื™ืช

    95 A P Asphaltic (Bitumen) compounds

    ASTM-D-92 ื ืงื•ื“ืช ื”ื‘ื–ืงื” ื•ืืฉ Flash and fire points ืชืจื›ื•ื‘ืช ืืกืคืœื˜ื™ืช )ื‘ื™ื˜ื•ืžืŸ(---

  • 037 Accreditation No. ISO/IEC 17025; 2005 Testing Laboratory Department:

    Schedule of Accreditation

    Site: P or T or M, P-Permanent, T-Temporary, M-Mobile

    Type of Scopes: A- Fixed, C- Flexible scope in analytical tests: Type of matrix, analytes, experimental systems and/or analytical characteristics may be subject to changes, in accordance with the laboratory's

    approved and documented procedures. For details, please refer to the list of Accredited Tests, available from the laboratory upon request.

    Date of issue 12.07.2017 Version No. 17 Page No. 21 of: 49 The certificate attached is an integral part of the schedule and is numbered identically ื”ืชืขื•ื“ื” ื”ืžืฆื•ืจืคืช ืœื ืกืคื— ื–ื” ืžื”ื•ื•ื” ื—ืœืง ื‘ืœืชื™ ื ืคืจื“ ืžืžื ื• ื•ืžืกืคืจื” ื–ื”ื” ืœืžืกืคืจ ื”ื ืกืคื—

    Item Scope

    Type

    Site Materials / Products Tested Types of Test / Properties Measured Standard / Method Opinion and

    Interpretation

    Remarks

    Group of products: Metallic and Nonmetallic Materials :ืžืชื›ื•ืช ื•ื—ื•ืžืจื™ื ืืœ ืžืชื›ืชื™ื™ืืžืฉืคื—ืช ืžื•ืฆืจื™ื

    Physical Testing ื‘ื“ื™ืงื•ืช ืคื™ื–ื™ืงืœื™ื•ืช

    96 A P;T Hot - dip Zinc coating on steel and cast iron products

    ืขืœื‘ื˜ื‘ื™ืœื” ื—ืžื” ืฆื™ืคื•ื™ ืื‘ืฅ ื™ืฆืงืช ืžื•ืฆืจื™ ื•ืขืœ ืคืœื“ื” ืžื•ืฆืจื™ ื‘ืจื–ืœ

    Thickness and adhesion

    test of hot- dip zinc

    coating on steel

    ื‘ื“ื™ืงืช ืขื•ื‘ื™ ื•ื”ื™ื“ื‘ืงื•ืช ืฉืœ ืฆื™ืคื•ื™ ืื‘ืฅ ื‘ื˜ื‘ื™ืœื” ื—ืžื”

    SI 918 ---

    97 A P;T Paints and varnishes ื•ืœื›ื•ืช ืฆื‘ืขื™ื Adhesion test by x-cut method

    --- X SI 785 part 27 ื—ื™ืชื•ืš ื‘ืฉื™ื˜ืช ื”ื™ื“ื‘ืงื•ืชื‘ื“ื™ืงืช

    98 A P;T Paints and varnishes ื•ืœื›ื•ืช ืฆื‘ืขื™ื Determination of film thickness

    --- SI 785 part 10 ืงื‘ื™ืขืช ืขื•ื‘ื™ ื”ื“ื•ืง

    99 A T Zinc coating on Aluminum Lighting columns

    ืฆื™ืคื•ื™ ืื‘ืฅ ืขืœ ืขืžื•ื“ื™ ืชืื•ืจื” ืžืืœื•ืžื™ื ื™ื•ื

    Thickness and adhesion

    test of hot- dip zinc

    coating on steel

    ื‘ื“ื™ืงืช ืขื•ื‘ื™ ื•ื”ื™ื“ื‘ืงื•ืช ืฉืœ ืฆื™ืคื•ื™ ืื‘ืฅ ื‘ื˜ื‘ื™ืœื” ื—ืžื”

    SI 812 part 2 section 3.8 --- Meet the requirement of SI 918

    100 A T Zinc coating on Steel Lighting columns

    ืฆื™ืคื•ื™ ืื‘ืฅ ืขืœ ืขืžื•ื“ื™ ืชืื•ืจื” ืžืคืœื“ื”

    Thickness and adhesion

    test of hot- dip zinc coating on steel

    ื‘ื“ื™ืงืช ืขื•ื‘ื™ ื•ื”ื™ื“ื‘ืงื•ืช ืฉืœ ืฆื™ืคื•ื™ ืื‘ืฅ ื‘ื˜ื‘ื™ืœื” ื—ืžื”

    SI 812 part 1 section 3.8 --- Meet the requirement of SI 918

  • 037 Accreditation No. ISO/IEC 17025; 2005 Testing Laboratory Department:

    Schedule of Accreditation

    Site: P or T or M, P-Permanent, T-Temporary, M-Mobile

    Type of Scopes: A- Fixed, C- Flexible scope in analytical tests: Type of matrix, analytes, experimental systems and/or analytical characteristics may be subject to changes, in accordance with the laboratory's

    approved and documented procedures. For details, please refer to the list of Accredited Tests, available from the laboratory upon request.

    Date of issue 12.07.2017 Version No. 17 Page No. 22 of: 49 The certificate attached is an integral part of the schedule and is numbered identically ื”ืชืขื•ื“ื” ื”ืžืฆื•ืจืคืช ืœื ืกืคื— ื–ื” ืžื”ื•ื•ื” ื—ืœืง ื‘ืœืชื™ ื ืคืจื“ ืžืžื ื• ื•ืžืกืคืจื” ื–ื”ื” ืœืžืกืคืจ ื”ื ืกืคื—

    Item Scope

    Type

    Site Materials / Products Tested Types of Test / Properties Measured Standard / Method Opinion and

    Interpretation

    Remarks

    Group of Products: Soil and Paving :ืงืจืงืข ื•ืกืœื™ืœื” ืžืฉืคื—ืช ืžื•ืฆืจื™ื

    Base Construction ื”ืžื‘ื ื”ื‘ื™ืกื•ืก

    101 A P Cohesive Soils ืงืจืงืขื•ืช ืงื•ื”ื–ื™ื‘ื™ื•ืช Consolidated Undrained Triaxial Compression (CU)

    ื’ื–ื™ืจื” ืžืจื—ื‘ื™ืช ื‘ืœืชื™ ืžื ื•ืงื–ืช (CU) ืœืื—ืจ ืงื•ื ืกื•ืœื™ื“ืฆื™ื”

    ASTM-D-4767 ---

    102 A P Cohesive soils ืงืจืงืขื•ืช ืงื•ื”ื–ื™ื‘ื™ื•ืช One-dimensional swell or settlement potential

    ื—ื“ ืฉืงื™ืขื”ืœืชืคื™ื—ื” ืื• ืœืคื•ื˜ื ืฆื™ืืœ ืฆื™ืจื™ืช

    ASTM-D-4546 ---

    103 A P Cohesive soils ืงืจืงืขื•ืช ืงื•ื”ื–ื™ื‘ื™ื•ืช Unconfined compressive strength ื—ื•ื–ืง ื”ืœื—ื™ืฆื” ื‘ืœื ื›ืœื•ื ASTM-D-2166 ---

    104 A P Cohesive soils ืงื•ื”ื–ื™ื‘ื™ื•ืช ืงืจืงืขื•ืช Unconsolidated-undrained triaxial compression test (UU)

    ืžืจื—ื‘ื™ืช ื‘ืœืชื™ ืžื ื•ืงื–ืช ืœืœื ื’ื–ื™ืจื” (UU) ืงื•ื ืกื•ืœื™ื“ืฆื™ื”

    ASTM-D-2850 ---

    105 A P Intact rock core specimens ืฉืœืžื™ื ื’ืœืขื™ื ื™ ืกืœืข Splitting tensile strength ืœืžืชื™ื—ื” ื‘ื‘ืงื™ืขื” ื—ื•ื–ืง ASTM-D-3967 ---

    106 A P Intact rock core specimens ื’ืœืขื™ื ื™ ืกืœืข ืฉืœืžื™ื Unconfined compressive strength ื—ื•ื–ืง ืœื—ื™ืฆื” ื‘ืœื ื›ืœื•ื ASTM-D-7012 ---

    107 A T Paved and UnPaved Surfaces

    -Deflections with a Falling-Weight ืžืฉื˜ื—ื™ื ืกืœื•ืœื™ื ื•ืœื ืกืœื•ืœื™ืType Impulse Load Device.

    ืžื“ื™ื“ืช ืื’ื ื™ ืฉืงื™ืขื•ืช ื‘ืฉื™ื˜ืช ื”ืžืฉืงื•ืœืช ื”ื ื•ืคืœืช

    ASTM-D-4694-09 ---

    108 A T Paved and UnPaved Surfaces

    Standard Guide for General ืžืฉื˜ื—ื™ื ืกืœื•ืœื™ื ื•ืœื ืกืœื•ืœื™ืPavement Deflection Measurements

    ื”ื ื—ื™ื•ืช ื›ืœืœื™ื•ืช ืœืžื“ื™ื“ืช ืฉืงื™ืขื” ื‘ืžื™ืกืขื•ืช

    ASTM-D-4695-03 ---

    109 A P Rock ืกืœืข Determination of the point load strength index

    ASTM-D-5731 ื ืงื•ื“ืชื™ ื—ื•ื–ืง ืื™ื ื“ืงืก ื‘ื“ื™ืงืช---

    110 A P;T Rock core ืกืœืข ื’ืœืขื™ื ื™ Determining rock quality designation (RQD)

    ASTM-D-6032 ืกืœืข ื’ืœืขื™ื ื™ ืื™ื›ื•ืช ืœืงื‘ื™ืขืช ืฉื™ื˜ื”---

    111 A P Shales and similar weak rocks

    ASTM-D-4644 ืขืžื™ื“ื•ืช ืกืœืข ืจืš ืœืฉื—ื™ืงื” ื‘ืžื™ื Slake durability ืกืœืข ืจืš---

    112 A P Soil ืงืจืงืขื•ืช Direct shear test under consolidated drained conditions

    ื’ื–ื™ืจื” ื™ืฉื™ืจื” ืžื ื•ืงื–ืช ืœืื—ืจ ืงื•ื ืกื•ืœื™ื“ืฆื™ื”

    ASTM-D-3080 ---

  • 037 Accreditation No. ISO/IEC 17025; 2005 Testing Laboratory Department:

    Schedule of Accreditation

    Site: P or T or M, P-Permanent, T-Temporary, M-Mobile

    Type of Scopes: A- Fixed, C- Flexible scope in analytical tests: Type of matrix, analytes, experimental systems and/or analytical characteristics may be subject to changes, in accordance with the laboratory's

    approved and documented procedures. For details, please refer to the list of Accredited Tests, available from the laboratory upon request.

    Date of issue 12.07.2017 Version No. 17 Page No. 23 of: 49 The certificate attached is an integral part of the schedule and is numbered identically ื”ืชืขื•ื“ื” ื”ืžืฆื•ืจืคืช ืœื ืกืคื— ื–ื” ืžื”ื•ื•ื” ื—ืœืง ื‘ืœืชื™ ื ืคืจื“ ืžืžื ื• ื•ืžืกืคืจื” ื–ื”ื” ืœืžืกืคืจ ื”ื ืกืคื—

    Item Scope

    Type

    Site Materials / Products Tested Types of Test / Properties Measured Standard / Method Opinion and

    Interpretation

    Remarks

    Group of Products: Soil and Paving :ืงืจืงืข ื•ืกืœื™ืœื” ืžืฉืคื—ืช ืžื•ืฆืจื™ื

    Base Construction ื”ืžื‘ื ื”ื‘ื™ืกื•ืก

    113 A T Soil ืงืจืงืขื•ืช Investigation and sampling by auger borings

    ืžืงื“ื— ืื•ื’ืจ ืœืฆืจื›ื™ ื“ื’ื™ืžื” ื‘ืขื–ืจืช ื—ืงื™ืจืช ืงืจืงืข

    ASTM-D-1452 ---

    114 A P Soil ืงืจืงืขื•ืช Measurement of collapse potential ืคื•ื˜ื ืฆื™ืืœ ืœืงื‘ื™ืขืช ื‘ื“ื™ืงื” (ืžื™ื™ื˜) ืœื”ืชืžื•ื˜ื˜ื•ืช

    ASTM-D-5333 ---

    115 A P Soil ืงืจืงืขื•ืช One-dimensional consolidation properties

    ASTM-D-2435 ื—ื“ ืฆื™ืจื™ืช ืงื•ื ืกื•ืœื™ื“ืฆื™ื”---

    116 A T Soil ืงืจืงืขื•ืช Penetration test and split-barrel sampling

    ื‘ื“ื™ืงืช ื”ื—ื“ืจื” ืชืงื ื™ืช ื•ื“ื’ื™ืžืช (SPT) ืงืจืงืข ื‘ื’ืœื™ืœ ืžืคื•ืฆืœ

    ASTM-D-1586 ---

    117 A T Soil ืงืจืงืขื•ืช Standard Practice for Thin-Walled Tube Sampling of Soils for Geotechnical Purposes

    ื ื˜ื™ืœืช ืžื“ื’ื ืงืจืงืข ื‘ืœืชื™ ืžื•ืคืจ ืขืœ ืฆื™ื ื•ืจ ื“ืง ื“ื•ืคืŸื™ื“ื™

    In house procedure

    ---

    Based on: ASTMโ€“D-1587

    118 A T Soil samples ืงืจืงืขืžื“ื’ืžื™ Preserving and transporting ืืจื™ื–ื” ื•ื”ื•ื‘ืœื” ASTM-D-4220 ---

    119 A P Soils for civil engineering purposes

    ื”ื ื“ืกื”ืœืžื˜ืจื•ืช ืงืจืงืขื•ืช ืื–ืจื—ื™ืช

    Consolidated drained triaxial

    compression test with measurement of volume change

    (CD)

    ื’ื–ื™ืจื” ืžืจื—ื‘ื™ืช ืžื ื•ืงื–ืช ืœืื—ืจ ืงื•ื ืกื•ืœื™ื“ืฆื™ื” ื›ื•ืœืœ ืžื“ื™ื“ืช ืฉื™ื ื•ื™

    (CDื ืคื— )

    BS 1377 part 8

    section 8 ---

  • 037 Accreditation No. ISO/IEC 17025; 2005 Testing Laboratory Department:

    Schedule of Accreditation

    Site: P or T or M, P-Permanent, T-Temporary, M-Mobile

    Type of Scopes: A- Fixed, C- Flexible scope in analytical tests: Type of matrix, analytes, experimental systems and/or analytical characteristics may be subject to changes, in accordance with the laboratory's

    approved and documented procedures. For details, please refer to the list of Accredited Tests, available from the laboratory upon request.

    Date of issue 12.07.2017 Version No. 17 Page No. 24 of: 49 The certificate attached is an integral part of the schedule and is numbered identically ื”ืชืขื•ื“ื” ื”ืžืฆื•ืจืคืช ืœื ืกืคื— ื–ื” ืžื”ื•ื•ื” ื—ืœืง ื‘ืœืชื™ ื ืคืจื“ ืžืžื ื• ื•ืžืกืคืจื” ื–ื”ื” ืœืžืกืคืจ ื”ื ืกืคื—

    Item Scope

    Type

    Site Materials / Products Tested Types of Test / Properties Measured Standard / Method Opinion and

    Interpretation

    Remarks

    Group of Products: Soil and Paving :ืงืจืงืข ื•ืกืœื™ืœื”ืžืฉืคื—ืช ืžื•ืฆืจื™ื

    Physical Test and Asphalt, Traffic Signs & Pavement Marking ื•ืชื‘ื“ื™ืงื•ืช ืคื™ื–ื™ืงืœื™ื•ืช ื•ืืกืคืœื˜, ืกื™ืžื ื™ ื“ืจืš ื•ืชืžืจื•ืจื™ื ื‘ืžื™ืกืข

    120 A P;T Fixed, Vertical road traffic signs

    SI 12899 part 1 ืžื“ื™ื“ืช ื”ื—ื–ืจ ืื•ืจ Measuring of reflected light ืชืžืจื•ืจื™ ื“ืจืš ืื ื›ื™ื™ื, ืงื‘ื•ืขื™ื---

    121 A T Pavement markings ืกื™ืžื•ื ื™ ื›ื‘ื™ืฉ / ืžื™ืกืขื•ืช Measurement of the Luminance Coefficient

    ASTM E 2302 ืžื“ื™ื“ืช ืžืงื“ื ื‘ื”ื™ืงื•ืช ---

  • 037 Accreditation No. ISO/IEC 17025; 2005 Testing Laboratory Department:

    Schedule of Accreditation

    Site: P or T or M, P-Permanent, T-Temporary, M-Mobile

    Type of Scopes: A- Fixed, C- Flexible scope in analytical tests: Type of matrix, analytes, experimental systems and/or analytical characteristics may be subject to changes, in accordance with the laboratory's

    approved and documented procedures. For details, please refer to the list of Accredited Tests, available from the laboratory upon request.

    Date of issue 12.07.2017 Version No. 17 Page No. 25 of: 49 The certificate attached is an integral part of the schedule and is numbered identically ื”ืชืขื•ื“ื” ื”ืžืฆื•ืจืคืช ืœื ืกืคื— ื–ื” ืžื”ื•ื•ื” ื—ืœืง ื‘ืœืชื™ ื ืคืจื“ ืžืžื ื• ื•ืžืกืคืจื” ื–ื”ื” ืœืžืกืคืจ ื”ื ืกืคื—

    Item Scope

    Type

    Site Materials / Products Tested Types of Test / Properties Measured Standard / Method Opinion and

    Interpretation

    Remarks

    Group of Products: Soil and Paving - Asphalts and Bitumen :ืืกืคืœื˜ ื•ื‘ื™ื˜ื•ืžืŸ -ืงืจืงืข ื•ืกืœื™ืœื” ืžืฉืคื—ืช ืžื•ืฆืจื™ื

    Chemical and Physical Testing ื‘ื“ื™ืงื•ืช ื›ื™ืžื™ื•ืช ื•ืคื™ื–ื™ืงืœื™ื•ืช

    122 A P;T Asphalt Binder ืฉื™ื›ื‘ื” ืžืงืฉืจืช -ืืกืคืœื˜ Accelerated Aging of Asphalt Binder Using a Pressurized Aging Vessel (PAV)

    ื”ื–ื“ืงื ื•ืช ื‘ื™ื˜ื•ืžืŸ ืืกืคืœื˜ื™ PAV ืžื›ืฉื™ืจ ื‘ืืžืฆืขื•ืช

    ASTM-D-6521

    --- ASTM= American Society for Testing

    and Materials

    123 A P Asphalt Binder ืฉื™ื›ื‘ื” ืžืงืฉืจืช -ืืกืคืœื˜ Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear

    Rheometer (DSR)

    ื‘ื“ื™ืงืช ืชื›ื•ื ื•ืช ืจื™ืื•ืœื•ื’ื™ื•ืช ืฉืœ ื‘ื™ื˜ื•ืžืŸ ืืกืคืœื˜ื™ ืชื•ืš ืฉื™ืžื•ืฉ

    ื‘ื’ื–ื™ืจื” ื“ื™ื ืืžื™ืช ื‘ืืžืฆืขื•ืช DSRืžื›ืฉื™ืจ

    ASTM-D-7175

    ---

    Meet the requirement of SI 161 part 1

    124 A P;T Asphalt Binder ืืกืคืœื˜ - ืฉื™ื›ื‘ื” ืžืงืฉืจืช Effect of Heat and Air on a Moving Film of Asphalt

    (Rolling Thin-film Oven test)

    ื‘ื“ื™ืงืช ื”ืฉืคืขืช ื—ื™ืžื•ื ื•ืื•ื•ื™ืจ ืขืœ ืกืจื˜ ื‘ื™ื˜ื•ืžืŸ ืืกืคืœื˜ื™ ื ืข

    ื“ืงื”()ื‘ื“ื™ืงื” ื‘ืชื ื•ืจ ืฉืœ ืฉื›ื‘ื”

    ASTM-D-2872

    ---

    Meet the requirement of SI 161 part 1

    125 A P; P1; P4

    Bituminous Paving Mixture ืชืขืจื•ื‘ื•ืช ืกืœื™ืœื” ื‘ื™ื˜ื•ืžื ื™ื•ืช Maximum Specific Gravity and Density Using Automatic Vacuum Sealing Method

    ืฆืคื™ืคื•ืชืžืฉืงืœ ืกื’ื•ืœื™ ื•ืื™ื˜ื•ื ื‘ืฉื™ื˜ืช ืกื™ืžืœื™ืชืงืž ืืงื•ืื•ื•ื‘

    ASTM โ€“D6857 ---

    126 A P1;P3 Bituminous paving mixtures ืชืขืจื•ื‘ื•ืช ืกืœื™ืœื” ื‘ื™ื˜ื•ืžื ื™ื•ืช Quantitative extraction from bituminous paving mixtures:

    Cold extraction

    ื‘ื“ื™ืงืช ื”ืชื›ื•ืœื” ื”ื›ืžื•ืชื™ืช ื‘ืชืขืจื•ื‘ืช ืืกืคืœื˜ื™ืช: ืžื™ืฆื•ื™ ืงืจ

    ASTM-D-2172

    Method A ---

    127 A P1 Bituminous paving mixtures ืชืขืจื•ื‘ื•ืช ืกืœื™ืœื” ื‘ื™ื˜ื•ืžื ื™ื•ืช Quantitative extraction from bituminous paving mixtures:

    Hot extraction

    ื‘ื“ื™ืงืช ื”ืชื›ื•ืœื” ื”ื›ืžื•ืชื™ืช ื‘ืชืขืจื•ื‘ืช ืืกืคืœื˜ื™ืช: ืžื™ืฆื•ื™ ื—ื

    ASTM-D-2172

    Method B ---

    128 A P1 Bituminous paving mixtures ืชืขืจื•ื‘ื•ืช ืกืœื™ืœื” ื‘ื™ื˜ื•ืžื ื™ื•ืช Quantitative extraction from bituminous paving mixtures:

    Hot extraction

    ื‘ื“ื™ืงืช ื”ืชื›ื•ืœื” ื”ื›ืžื•ืชื™ืช ื‘ืชืขืจื•ื‘ืช ืืกืคืœื˜ื™ืช: ืžื™ืฆื•ื™ ื—ื

    BS 598 part 102 ---

    BS= British Standards

    129 A T;T1; T3;T4

    T5;

    Bituminous paving mixtures ืชืขืจื•ื‘ื•ืช ืกืœื™ืœื” ื‘ื™ื˜ื•ืžื ื™ื•ืช Sampling ื ื˜ื™ืœืช ื”ืžื“ื’ื ื”ืžื™ื™ืฆื’ ASTM-D-979 ---

    130 A P; P1 Bituminous paving mixtures ืชืขืจื•ื‘ื•ืช ืกืœื™ืœื” ื‘ื™ื˜ื•ืžื ื™ื•ืช Theoretical maximum specific gravity and density

    ืงื‘ื™ืขืช ื”ืฆืคื™ืคื•ืช ืžืฉืงืœ ืกื’ื•ืœื™ ื• ื”ืžืงืกื™ืžืœื™ืช ื”ืชื™ืื•ืจื˜ื™ืช

    ASTM-D-2041 ---

  • 037 Accreditation No. ISO/IEC 17025; 2005 Testing Laboratory Department:

    Schedule of Accreditation

    Site: P or T or M, P-Permanent, T-Temporary, M-Mobile

    Type of Scopes: A- Fixed, C- Flexible scope in analytical tests: Type of matrix, analytes, experimental systems and/or analytical characteristics may be subject to changes, in accordance with the laboratory's

    approved and documented procedures. For details, please refer to the list of Accredited Tests, available from the laboratory upon request.

    Date of issue 12.07.2017 Version No. 17 Page No. 26 of: 49 The certificate attached is an integral part of the schedule and is numbered identically ื”ืชืขื•ื“ื” ื”ืžืฆื•ืจืคืช ืœื ืกืคื— ื–ื” ืžื”ื•ื•ื” ื—ืœืง ื‘ืœืชื™ ื ืคืจื“ ืžืžื ื• ื•ืžืกืคืจื” ื–ื”ื” ืœืžืกืคืจ ื”ื ืกืคื—

    Item Scope

    Type

    Site Materials / Products Tested Types of Test / Properties Measured Standard / Method Opinion and

    Interpretation

    Remarks

    Group of Products: Soil and Paving - Asphalts and Bitumen :ืืกืคืœื˜ ื•ื‘ื™ื˜ื•ืžืŸ -ืงืจืงืข ื•ืกืœื™ืœื” ืžืฉืคื—ืช ืžื•ืฆืจื™ื

    Chemical and Physical Testing ื‘ื“ื™ืงื•ืช ื›ื™ืžื™ื•ืช ื•ืคื™ื–ื™ืงืœื™ื•ืช

    131 A P; P1; P4

    Compacted Bituminous

    Mixtures

    ืชืขืจื•ื‘ื•ืช ื‘ื™ื˜ื•ืžื ื™ื•ืช ืžื”ื•ื“ืงื•ืช

    Bulk Specific Gravity and

    Density Using Automatic

    Vacuum Sealing Method

    ืžืžืฉื™ืช ื•ืฆืคื™ืคื•ืช ืกื’ื•ืœื™ ืžืฉืงืœ ื•ืืงื•ืืื™ื˜ื•ื ื‘ื• ื‘ืฉื™ื˜ืช

    ASTM-D6752

    ---

    132 A P;P1; P3; P4

    P5;

    Compacted bituminous

    paving mixture specimens

    ื“ื•ื’ืžืื•ืช ืฉืœ ืชืขืจื•ื‘ื•ืช ืกืœื™ืœื” ื‘ื™ื˜ื•ืžื ื™ื•ืช ืžื”ื•ื“ืงื•ืช

    Thickness or height ืื• ื’ื•ื‘ื” ืขื•ื‘ื™ ASTM-D-3549 ---

    133 A P;P1; P3; P4

    Compacted dense and open

    bituminous paving mixtures

    ืชืขืจื•ื‘ื•ืช ืืกืคืœื˜ ื‘ื™ื˜ื•ืžื ื™ื•ืช ืžื”ื•ื“ืงื•ืช ืœืกืœื™ืœื” ื•ืคืชื•ื—ื•ืช

    Percent air voids ืื—ื•ื– ื”ื—ืœืœ ASTM-D-3203 ---

    134 A P;T Existing and New Pedestrian Surfaces

    ืžืฉื˜ื—ื™ ื”ืœื™ื›ื” ืงื™ื™ืžื™ื ื•ื—ื“ืฉื™ื

    Slip resistance Using the British Pendulum Tester

    ื‘ืืžืฆืขื•ืช ื”ืชื ื’ื“ื•ืช ืœื”ื—ืœืงื” ืžื˜ื•ื˜ืœืช ื‘ืจื™ื˜ื™ืช

    SI 2279 Par. 1-5 ---

    135 A P;T Existing Pedestrian Surfaces ืžืฉื˜ื—ื™ ื”ืœื™ื›ื” ืงื™ื™ืžื™ื Slip resistance Using the British Pendulum Tester

    ื‘ืืžืฆืขื•ืช ื”ืชื ื’ื“ื•ืช ืœื”ื—ืœืงื” ืžื˜ื•ื˜ืœืช ื‘ืจื™ื˜ื™ืช

    AS/NZS 4663 Par. 1-6 ---

    AS/NZS = Australian New Zealand

    Standard

    136 A P;T; P1;T1

    Hot asphalt mixtures ืชืขืจื•ื‘ื•ืช ืืกืคืœื˜ื™ื•ืช ื—ืžื•ืช Stability, plastic flow and density using Marshall

    apparatus

    ื‘ื“ื™ืงืช ื™ืฆื™ื‘ื•ืช, ื ื–ื™ืœื•ืช ื•ืฆืคื™ืคื•ืช ื‘ืฉื™ื˜ืช ืžืจืฉืœ

    SI 362 appendix A ---

    SI= Israeli Standards

    137 A P;P1; P4; P3

    Non-absorptive compacted

    bituminous mixtures

    ืชืขืจื•ื‘ื•ืช ืืกืคืœื˜ ื‘ื™ื˜ื•ืžื ื™ื•ืช ืœื ืกื•ืคื’ื•ืช

    Bulk specific gravity and

    density

    ASTM-D-2726 ืžืฉืงืœ ืกื’ื•ืœื™ ื•ืฆืคื™ืคื•ืช---

    138 A P;T Painted Asphalt and Concrete Surfaces

    Slip resistance Using the British ืžืฉื˜ื—ื™ ืืกืคืœื˜ ื•ื‘ื˜ื•ืŸ ืฆื‘ื•ืขื™ื Pendulum Tester

    ื‘ืืžืฆืขื•ืช ื”ืชื ื’ื“ื•ืช ืœื”ื—ืœืงื” ืžื˜ื•ื˜ืœืช ื‘ืจื™ื˜ื™ืช

    BS EN 1436 : Annex D:

    D1; D2 ---

    139 A T;T1; T2

    Paved roads ื“ืจื›ื™ื ืกืœื•ืœื•ืช Accuracy of surface face ืคื ื™ ืฉื›ื‘ื•ืชื“ื™ื•ืง In house procedure ---

    Based on: PWD specification for paving

    and bridging section 32.8.1

    140 A P;T Surfaces ืžืฉื˜ื—ื™ื Measuring Surface Frictional Properties Using the British

    Pendulum Tester

    ืžืืคื™ื™ื ื™ ื”ื—ื™ื›ื•ืš ืฉืœ ืžื“ื™ื“ืชื‘ืืžืฆืขื•ืช ืžื˜ื•ื˜ืœืช ืžืฉื˜ื—

    ื‘ืจื™ื˜ื™ืช

    ASTM E 303 ---

    141 A P Traveled Surfaces ืžื™ืกืขื•ืช Measuring the Longitudinal Profile of Traveled Surfaces

    ืื•ืจื›ื™ ืฉืœ ืžื“ื™ื“ืช ืคืจื•ืคื™ืœ ืžื™ืกืขื•ืช

    ASTM-E-950 ---

  • 037 Accreditation No. ISO/IEC 17025; 2005 Testing Laboratory Department:

    Schedule of Accreditation

    Site: P or T or M, P-Permanent, T-Temporary, M-Mobile

    Type of Scopes: A- Fixed, C- Flexible scope in analytical tests: Type of matrix, analytes, experimental systems and/or analytical characteristics may be subject to changes, in accordance with the laboratory's

    approved and documented procedures. For details, please refer to the list of Accredited Tests, available from the laboratory upon request.

    Date of issue 12.07.2017 Version No. 17 Page No. 27 of: 49 The certificate attached is an integral part of the schedule and is numbered identically ื”ืชืขื•ื“ื” ื”ืžืฆื•ืจืคืช ืœื ืกืคื— ื–ื” ืžื”ื•ื•ื” ื—ืœืง ื‘ืœืชื™ ื ืคืจื“ ืžืžื ื• ื•ืžืกืคืจื” ื–ื”ื” ืœืžืกืคืจ ื”ื ืกืคื—

    Item Scope

    Type

    Site Materials / Products Tested Types of Test / Properties Measured Standard / Method Opinion and

    Interpretation

    Remarks

    Group of Products: Soil and Paving - Asphalts and Bitumen :ืืกืคืœื˜ ื•ื‘ื™ื˜ื•ืžืŸ -ืงืจืงืข ื•ืกืœื™ืœื” ืžืฉืคื—ืช ืžื•ืฆืจื™ื

    Chemical and Physical Testing ื‘ื“ื™ืงื•ืช ื›ื™ืžื™ื•ืช ื•ืคื™ื–ื™ืงืœื™ื•ืช

    142 A P Traveled Surfaces ืžื™ืกืขื•ืช Operating Inertial Profiling System

    ื”ืคืขืœืช ืžืขืจื›ืช ืœื‘ื“ื™ืงืช ืคืจื•ืคื™ืœ )ื’ืœื™ื•ืช( ื‘ืžื™ืกืขื•ืช

    AASHTO-R-57 ---

    AASHTO = American Association of

    State Highway and Transportation

    Officials

    Item Scope

    Type

    Site Materials / Products Tested Types of Test / Properties Measured Standard / Method Opinion and

    Interpretation

    Remarks

    Group of Products: Soil and Paving - Soil, Aggregates and Water :ื•ืžื™ื ืื’ืจื’ื˜ื™ืืงืจืงืข -ืงืจืงืข ื•ืกืœื™ืœื” ืžืฉืคื—ืช ืžื•ืฆืจื™ื

    Chemical and Physical Testing ื‘ื“ื™ืงื•ืช ื›ื™ืžื™ื•ืช ื•ืคื™ื–ื™ืงืœื™ื•ืช

    143 A P;T; P1;T1;

    P2;T2

    Aggregates ืื’ืจื’ื˜ื™ื Clay lumps and friable particles

    SI 1865 part 2 chapter 7 ืื—ื•ื– ื‘ื•ืœื™ ื—ืจืกื™ืช---

    Based on ASTM C 142

    Meet the requirement of SI 3

    144 A P2 Aggregates ืื’ืจื’ื˜ื™ื Determination of the crushing value (ACV)

    ืงื‘ื™ืขืช ืฉื™ืขื•ืจ ื”ื’ืจื™ืกื•ืช ื‘ืฉื™ื˜ื” ื”ื‘ืจื™ื˜ื™ืช

    BS 812 part 110 ---

    145 A P2 Aggregates ืื’ืจื’ื˜ื™ื Determination of the crushing value (ACV)

    ืงื‘ื™ืขืช ืฉื™ืขื•ืจ ื”ื’ืจื™ืกื•ืช ื‘ืฉื™ื˜ื” ื”ื‘ืจื™ื˜ื™ืช

    SI 1865 part 2 chapter 9 ---

    Based on BS 812 part 110

    Meet the requirement of SI 3

    146 A T;T1; T2;T3;

    T4;T5

    Aggregates ืื’ืจื’ื˜ื™ื Practice for sampling ื ื˜ื™ืœืช ืžื“ื’ืžื™ ืงืจืงืข ASTM-D-75 ---

    147 A T;T1; T2;T3;T4; T5

    Aggregates ืื’ืจื’ื˜ื™ื Practice for sampling ื ื˜ื™ืœืช ืžื“ื’ืžื™ ืงืจืงืข SI 1865 part 2 chapter 2 ---

    Based on ASTM D 75

  • 037 Accreditation No. ISO/IEC 17025; 2005 Testing Laboratory Department:

    Schedule of Accreditation

    Site: P or T or M, P-Permanent, T-Temporary, M-Mobile

    Type of Scopes: A- Fixed, C- Flexible scope in analytical tests: Type of matrix, analytes, experimental systems and/or analytical characteristics may be subject to changes, in accordance with the laboratory's

    approved and documented procedures. For details, please refer to the list of Accredited Tests, available from the laboratory upon request.

    Date of issue 12.07.2017 Version No. 17 Page No. 28 of: 49 The certificate attached is an integral part of the schedule and is numbered identically ื”ืชืขื•ื“ื” ื”ืžืฆื•ืจืคืช ืœื ืกืคื— ื–ื” ืžื”ื•ื•ื” ื—ืœืง ื‘ืœืชื™ ื ืคืจื“ ืžืžื ื• ื•ืžืกืคืจื” ื–ื”ื” ืœืžืกืคืจ ื”ื ืกืคื—

    Item Scope

    Type

    Site Materials / Products Tested Types of Test / Properties Measured Standard / Method Opinion and

    Interpretation

    Remarks

    Group of Products: Soil and Paving - Soil, Aggregates and Water :ื•ืžื™ื ืื’ืจื’ื˜ื™ืืงืจืงืข -ืงืจืงืข ื•ืกืœื™ืœื” ืžืฉืคื—ืช ืžื•ืฆืจื™ื

    Chemical and Physical Testing ื‘ื“ื™ืงื•ืช ื›ื™ืžื™ื•ืช ื•ืคื™ื–ื™ืงืœื™ื•ืช

    148 A P;T; P1;T1; P2;T2;

    P3;T3;

    P4;T4; P5;T5

    Aggregates ืื’ืจื’ื˜ื™ื Reducing samples to testing size

    ASTM-C-702 ื—ืฆื™ื™ืช ืžื“ื’ืžื™ ืงืจืงืข

    ---

    149 A P;T; P1;T1;

    P2;T2; P3;T3;

    P4;T4;

    P5;T5

    Aggregates ืื’ืจื’ื˜ื™ื Reducing samples to testing size

    ื”ื›ื ืช ื“ื•ื’ืžืื•ืช ื‘ื“ื™ืงื” )ื—ืฆื™ื™ืช ืžื“ื’ืžื™ื(

    SI 1865 part 2 chapter 3

    ---

    Based on ASTM C 702

    150 A P;T; P1;T1; P2;T2;

    P4;T4;

    P5;T5

    Bentonite suspension ืชืจื—ื™ืฃ ื‘ื ื˜ื•ื ื™ื™ื˜ PH pH In house procedure

    ---

    Based on: API series 13 โ€“ Drilling fluid

    materials

    API= American Petroleum Institute

    151 A P;T; P1;T1;

    P2;T2;

    P4;T4; P5;T5

    Bentonite suspension ืชืจื—ื™ืฃ ื‘ื ื˜ื•ื ื™ื™ื˜ Viscosity: Marsh funnel ื‘ื“ื™ืงืช ืฆืžื™ื’ื•ืช ืขืœ ื™ื“ื™ ืžืฉืคืš ืžืืจืฉ

    In house procedure

    ---

    Based on: API series 13 โ€“ Drilling fluid

    materials

    152 A P;P1; P2;P3;

    P4; P5

    Coarse aggregates ืื’ืจื’ื˜ื™ื ื’ืกื™ื Density, relative density (specific gravity), and

    absorption

    ASTM-C-127 ืฆืคื™ืคื•ืช, ืžืฉืงืœ ืกื’ื•ืœื™ ื•ืกืคื™ื’ื•ืช---

    153 A P;T; P1;T1; P2; T2

    Coarse aggregates ืื’ืจื’ื˜ื™ื ื’ืกื™ื Determination of particle shape: elongation index

    ืงื‘ื™ืขืช ืฆื•ืจืช ื”ื’ืจื’ื™ืจื™ื: ืžื“ื“ ื”ืžื•ืืจื›ื•ืช

    BS 812 part 105.2 ---

  • 037 Accreditation No. ISO/IEC 17025; 2005 Testing Laboratory Department:

    Schedule of Accreditation

    Site: P or T or M, P-Permanent, T-Temporary, M-Mobile

    Type of Scopes: A- Fixed, C- Flexible scope in analytical tests: Type of matrix, analytes, experimental systems and/or analytical characteristics may be subject to changes, in accordance with the laboratory's

    approved and documented procedures. For details, please refer to the list of Accredited Tests, available from the laboratory upon request.

    Date of issue 12.07.2017 Version No. 17 Page No. 29 of: 49 The certificate attached is an integral part of the schedule and is numbered identically ื”ืชืขื•ื“ื” ื”ืžืฆื•ืจืคืช ืœื ืกืคื— ื–ื” ืžื”ื•ื•ื” ื—ืœืง ื‘ืœืชื™ ื ืคืจื“ ืžืžื ื• ื•ืžืกืคืจื” ื–ื”ื” ืœืžืกืคืจ ื”ื ืกืคื—

    Item Scope

    Type

    Site Materials / Products Tested Types of Test / Properties Measured Standard / Method Opinion and

    Interpretation

    Remarks

    Group of Products: Soil and Paving - Soil, Aggregates and Water :ื•ืžื™ื ืื’ืจื’ื˜ื™ืืงืจืงืข -ืงืจืงืข ื•ืกืœื™ืœื” ืžืฉืคื—ืช ืžื•ืฆืจื™ื

    Chemical and Physical Testing ื‘ื“ื™ืงื•ืช ื›ื™ืžื™ื•ืช ื•ืคื™ื–ื™ืงืœื™ื•ืช

    154 A P;T; P1;T1; P2;T2

    Coarse aggregates ื’ืกื™ื ืื’ืจื’ื˜ื™ื Determination of particle shape: elongation index

    ืงื‘ื™ืขืช ืฆื•ืจืช ื”ื’ืจื’ื™ืจื™ื: ืžื“ื“ ื”ืžืื•ืจื›ื•ืช

    SI 1865 part 2 chapter

    11 --- Based on BS 812 part 105 sec 105.2

    Meet the requirement of SI 3

    155 A P;T; P1;T1;

    P2; T2

    Coarse aggregates ื’ืกื™ื ืื’ืจื’ื˜ื™ื Determination of particle shape: flakiness index

    ืงื‘ื™ืขืช ืฆื•ืจืช ื”ื’ืจื’ื™ืจื™ื: ืžื“ื“ ื”ืคื—ื™ืกื•ืช

    BS 812 part 105.1 ---

    BS= British Standards

    156 A P;T; P1;T1; P2;T2

    Coarse aggregates ื’ืกื™ื ืื’ืจื’ื˜ื™ื Determination of particle shape: flakiness index

    ืงื‘ื™ืขืช ืฆื•ืจืช ื”ื’ืจื’ื™ืจื™ื: ืžื“ื“ ื”ืคื—ื™ืกื•ืช

    SI 1865 part 2 chapter

    10 --- Based on BS 812 part 105 sec 105.1

    Meet the requirement of SI 3

    157 A P;T; P1;T1;

    P2;T2; P3;T3;

    P4;T4;

    P5;T5

    Fine aggregates ืื’ืจื’ื˜ื™ื ื“ืงื™ื Amount of material finer than the no. 200 (75-um)

    sieve

    ื“ืงื™ื ืขื•ื‘ืจื™ื ื”ื›ืžื•ืช ืงื‘ื™ืขืช (200)ืžืกืคืจ ืžืง"ืž 75ื ืคื”

    ASTM-C-117

    ---

    158 A P;T; P1;T1; P2;T2;

    P3;T3; P4;T4;

    P5;T5

    Fine aggregates ืื’ืจื’ื˜ื™ื ื“ืงื™ื Amount of material finer than the no. 200 (75-um) sieve

    ื“ืงื™ื ืขื•ื‘ืจื™ื ื”ื›ืžื•ืช ืงื‘ื™ืขืช (200)ืžืกืคืจ ืžืง"ืž 75ื ืคื”

    ASTM-D-1140

    ---

    159 A P;T; P1;T1;

    P2;T2; P3;T3;

    P4;T4;

    P5;T5

    Fine aggregates ื“ืงื™ื ืื’ืจื’ื˜ื™ื Amount of material finer than the no. 200 (75-um)

    sieve

    ื“ืงื™ื ืขื•ื‘ืจื™ื ื”ื›ืžื•ืช ืงื‘ื™ืขืช (200)ืžืกืคืจ ืžืง"ืž 75ื ืคื”

    SI 1865 part 2 chapter 6

    ---

    Based on ASTM C117

    Meet the requirement of SI 3

  • 037 Accreditation No. ISO/IEC 17025; 2005 Testing Laboratory Department:

    Schedule of Accreditation

    Site: P or T or M, P-Permanent, T-Temporary, M-Mobile

    Type of Scopes: A- Fixed, C- Flexible scope in analytical tests: Type of matrix, analytes, experimental systems and/or analytical characteristics may be subject to changes, in accordance with the laboratory's

    approved and documented procedures. For details, please refer to the list of Accredited Tests, available from the laboratory upon request.

    Date of issue 12.07.2017 Version No. 17 Page No. 30 of: 49 The certificate attached is an integral part of the schedule and is numbered identically ื”ืชืขื•ื“ื” ื”ืžืฆื•ืจืคืช ืœื ืกืคื— ื–ื” ืžื”ื•ื•ื” ื—ืœืง ื‘ืœืชื™ ื ืคืจื“ ืžืžื ื• ื•ืžืกืคืจื” ื–ื”ื” ืœืžืกืคืจ ื”ื ืกืคื—

    Item Scope

    Type

    Site Materials / Products Tested Types of Test / Properties Measured Standard / Method Opinion and

    Interpretation

    Remarks

    Group of Products: Soil and Paving - Soil, Aggregates and Water :ื•ืžื™ื ืื’ืจื’ื˜ื™ืืงืจืงืข -ืงืจืงืข ื•ืกืœื™ืœื” ืžืฉืคื—ืช ืžื•ืฆืจื™ื

    Chemical and Physical Testing ื‘ื“ื™ืงื•ืช ื›ื™ืžื™ื•ืช ื•ืคื™ื–ื™ืงืœื™ื•ืช

    160 A P;P1; P3; P4

    Fine aggregates ืื’ืจื’ื˜ื™ื ื“ืงื™ื Density, relative density (specific gravity), and absorption

    ASTM-C-128 ืฆืคื™ืคื•ืช, ืžืฉืงืœ ืกื’ื•ืœื™ ื•ืกืคื™ื’ื•ืช---

    161 A P Fine aggregates for concrete ื“ืงื™ื ืœื‘ื˜ื•ืŸ ืื’ืจื’ื˜ื™ื Organic impurities ืชื›ื•ืœืช ืœื›ืœื•ื›ืช ืื•ืจื’ื ื™ืช ASTM-C-40 ---

    Meet the requirement of SI 3

    162 A P;P1; P3;P4;

    P5

    Fine and coarse aggregates ื“ืงื™ื ื•ื’ืกื™ื ืื’ืจื’ื˜ื™ื Density, relative density (specific gravity), and

    absorption

    SI 1865 part 2 chapter 4 ืฆืคื™ืคื•ืช, ืžืฉืงืœ ืกื’ื•ืœื™ ื•ืกืคื™ื’ื•ืช---

    Based on ASTM C 127, ASTM C 128

    Meet the requirement of SI 3

    163 A P Fine and coarse aggregates ื“ืงื™ื ื•ื’ืกื™ื ืื’ืจื’ื˜ื™ื Resistance to degradation by abrasion and impact in the

    Los Angeles machine

    ืฉื™ืขื•ืจ ืฉื—ื™ืงื” ื‘ืฉื™ื˜ืช ืœื•ืก ืื ื’'ืœืก

    SI 1865 part 2 chapter 8 ---

    Based on ASTM C 535, C 131 Meet

    the requirement of SI 3

    164 A P;T; P1; T1;

    P2; T2;

    P3; T3; P4; T4;

    P5 ;T5;

    Fine and coarse aggregates ื“ืงื™ื ื•ื’ืกื™ื ืื’ืจื’ื˜ื™ื Sieve analysis ื ื™ืคื•ื™ ASTM-C-136

    ---

    165 A P; T; P1; T1;

    P2; T2; P3; T3;

    P4; T4;

    P5; T5;

    Fine and coarse aggregates ื“ืงื™ื ื•ื’ืกื™ื ืื’ืจื’ื˜ื™ื Sieve analysis ื ื™ืคื•ื™ SI 1865 part 2 chapter 5

    ---

    Similar to ASTM C 136

    Meet the requirement of SI 3

    166 A P Large-size coarse aggregates ืžื™ืžื“ ื™ื’ื“ื•ืœ ื™ืื’ืก ืื’ืจื’ื˜ื™ื Resistance to degradation by abrasion and impact in the

    Los Angeles machine

    ืฉื™ืขื•ืจ ืฉื—ื™ืงื” ื‘ืฉื™ื˜ืช ืœื•ืก ืื ื’'ืœืก

    ASTM-C-535 ---

  • 037 Accreditation No. ISO/IEC 17025; 2005 Testing Laboratory Department:

    Schedule of Accreditation

    Site: P or T or M, P-Permanent, T-Temporary, M-Mobile

    Type of Scopes: A- Fixed, C- Flexible scope in analytical tests: Type of matrix, analytes, experimental systems and/or analytical characteristics may be subject to changes, in accordance with the laboratory's

    approved and documented procedures. For details, please refer to the list of Accredited Tests, available from the laboratory upon request.

    Date of issue 12.07.2017 Version No. 17 Page No. 31 of: 49 The certificate attached is an integral part of the schedule and is numbered identically ื”ืชืขื•ื“ื” ื”ืžืฆื•ืจืคืช ืœื ืกืคื— ื–ื” ืžื”ื•ื•ื” ื—ืœืง ื‘ืœืชื™ ื ืคืจื“ ืžืžื ื• ื•ืžืกืคืจื” ื–ื”ื” ืœืžืกืคืจ ื”ื ืกืคื—

    Item Scope

    Type

    Site Materials / Products Tested Types of Test / Properties Measured Standard / Method Opinion and

    Interpretation

    Remarks

    Group of Products: Soil and Paving - Soil, Aggregates and Water :ื•ืžื™ื ืื’ืจื’ื˜ื™ืืงืจืงืข -ืงืจืงืข ื•ืกืœื™ืœื” ืžืฉืคื—ืช ืžื•ืฆืจื™ื

    Chemical and Physical Testing ื‘ื“ื™ืงื•ืช ื›ื™ืžื™ื•ืช ื•ืคื™ื–ื™ืงืœื™ื•ืช

    167 A P Organic soils and peat ืงืจืงืขื•ืช ืื•ืจื’ื ื™ื•ืช ื•ื›ื‘ื•ืœ Moisture, Ash, and Organic Matter

    ืชื›ื•ืœืช ืœื—ื•ืช, ืืคืจ ื•ื—ื•ืžืจื™ื ืื•ืจื’ื ื™ื™ื

    ASTM-D-2974 ---

    168 A P Small-size coarse aggregates ืžื™ืžื“ ืงื˜ื ื™ ื™ืื’ืก ืื’ืจื’ื˜ื™ื Resistance to degradation by abrasion and impact in the

    Los Angeles machine

    ืฉื™ืขื•ืจ ืฉื—ื™ืงื” ื‘ืฉื™ื˜ืช ืœื•ืก ืื ื’'ืœืก

    ASTM-C-131 ---

    169 A P;T; P1;T1;

    P2;T2;

    P3;T3;

    P4;T4

    Soil ืงืจืงืขื•ืช Classification of soils for civil engineering purposes:

    laboratory classification and

    visual classification

    ื”ื ื“ืกื” ืœืžื˜ืจื•ืช ืงืจืงืขื•ืช ืžื™ื•ืŸ ื•ืžื™ื•ืŸ ื‘ืžืขื‘ื“ื” ืžื™ื•ืŸ: ืื–ืจื—ื™ืช

    ื—ื–ื•ืชื™

    SI 253

    ---

    170 A P;T; P1;T1;

    P2;T2;

    P3;T3; P4;T4;

    P5;T5

    Soil ืงืจืงืขื•ืช Compaction characteristics using modified effort

    ื‘ื“ื™ืงืช ื™ื—ืกื™ ืฆืคื™ืคื•ืช ืจื˜ื™ื‘ื•ืช ื‘ืฉื™ื˜ืช ืžื•ื“ื™ืคื™ื™ื“

    ASTM-D-1557

    ---

    171 A P;T; P1;T1; P2;T2;

    P3;T3;

    P4;T4; P5;T5

    Soil ืงืจืงืขื•ืช Compaction characteristics using standard effort

    ASTM-D-698 ื‘ื“ื™ืงืช ื™ื—ืกื™ ืฆืคื™ืคื•ืช ืจื˜ื™ื‘ื•ืช

    ---

    172 A T;T1

    Soil ืงืจืงืขื•ืช DCP- South African pick ื“ืงืจ ื“ืจื•ื ืืคืจื™ืงืื™ In house procedure ---

    Based on: Prof. M. Livneh, transportation

    research institute

    173 A P;P1; P2;P3;

    P4;

    Soil ืงืจืงืขื•ืช Determination of free expansion in a measuring

    tube

    In house procedure ืงื‘ื™ืขืช ืชืคื™ื—ื” ื—ื•ืคืฉื™ืช ื‘ืžืฉื•ืจื”---

    Based on: PWD 13.110

  • 037 Accreditation No. ISO/IEC 17025; 2005 Testing Laboratory Department:

    Schedule of Accreditation

    Site: P or T or M, P-Permanent, T-Temporary, M-Mobile

    Type of Scopes: A- Fixed, C- Flexible scope in analytical tests: Type of matrix, analytes, experimental systems and/or analytical characteristics may be subject to changes, in accordance with the laboratory's

    approved and documented procedures. For details, please refer to the list of Accredited Tests, available from the laboratory upon request.

    Date of issue 12.07.2017 Version No. 17 Page No. 32 of: 49 The certificate attached is an integral part of the schedule and is numbered identically ื”ืชืขื•ื“ื” ื”ืžืฆื•ืจืคืช ืœื ืกืคื— ื–ื” ืžื”ื•ื•ื” ื—ืœืง ื‘ืœืชื™ ื ืคืจื“ ืžืžื ื• ื•ืžืกืคืจื” ื–ื”ื” ืœืžืกืคืจ ื”ื ืกืคื—

    Item Scope

    Type

    Site Materials / Products Tested Types of Test / Properties Measured Standard / Method Opinion and

    Interpretation

    Remarks

    Group of Products: Soil and Paving - Soil, Aggregates and Water :ื•ืžื™ื ืื’ืจื’ื˜ื™ืืงืจืงืข -ืงืจืงืข ื•ืกืœื™ืœื” ืžืฉืคื—ืช ืžื•ืฆืจื™ื

    Chemical and Physical Testing ื‘ื“ื™ืงื•ืช ื›ื™ืžื™ื•ืช ื•ืคื™ื–ื™ืงืœื™ื•ืช

    174 A P;P1; P2;P3; P4;

    Soil ื•ืชืงืจืงืข Determination of Water (Moisture) Content of Soil By Direct Heating

    )ืจื˜ื™ื‘ื•ืช( ืฉืœ ืชื›ื•ืœืช ืžื™ื ืงืจืงืขื•ืช ื‘ื—ื™ืžื•ื ื™ืฉื™ืจ

    SI 1865 part 3 chapter 8 ---

    Based on ASTM D 4959

    175 A P; P1; P2; P3;

    P4;

    Soil ืงืจืงืขื•ืช Liquid limit, plastic limit, and plasticity index

    ื’ื‘ื•ืœื•ืช ื ื–ื™ืœื•ืช, ื’ื‘ื•ืœ ืคืœืกื˜ื™ื•ืช ื•ืื™ื ื“ืงืก ื”ืคืœืกื˜ื™ื•ืช

    ASTM-D-4318 ---

    Meet the requirement of SI 3

    176 A P Soil

    Particle size Analysis by ืงืจืงืขื•ืช hydrometer-smaller than 0.075 mm

    ืื ืœื™ื–ื” ืžื›ื ื™ืช ืฉืœ ืงืจืงืขื•ืช ื’ื•ื“ืœ โ€“ื‘ืืžืฆืขื•ืช ื”ื™ื“ืจื•ืžื˜ืจ

    ืž"ืž 0.075 โ€“ื’ืจื’ื™ืจ ืงื˜ืŸ ืž ASTM D 422 ---

    177 A P;T; P1;T1;

    P2;T2; P3;T3;

    P4;T4;

    P5;T5

    Soil and aggregates ื•ืื’ืจื’ื˜ื™ื ื•ืชืงืจืงืข Compaction characteristics using Modified Effort

    ื‘ื“ื™ืงืช ื™ื—ืกื™ ืฆืคื™ืคื•ืช ืจื˜ื™ื‘ื•ืช ื‘ืฉื™ื˜ืช ืžื•ื“ื™ืคื™ื™ื“

    SI 1865 part 3 chapter 2

    ---

    Based on ASTM D 1557, ASTM D 698

    178 A P Soil and Aggregates ืงืจืงืขื•ืช ื•ืื’ืจื’ื˜ื™ื Determination of maximum density index of soil

    ืงื‘ื™ืขืช ืื™ื ื“ืงืก ืฆืคื™ืคื•ืช ืžืงืกื™ืžืืœื™ืช ืฉืœ ืงืจืงืขื•ืช

    ASTM D 4253 ---

    179 A P Soil and Aggregates ืงืจืงืขื•ืช ื•ืื’ืจื’ื˜ื™ื Determination of Micro-Deval Resistance to Wear

    ืงื‘ื™ืขืช ื”ืชื ื’ื“ื•ืช ืœืฉื—ื™ืงื” ื‘ืฉื™ื˜ืช ืžื™ืงืจื•ื“ื‘ืœ

    EN 1097 โ€“ 1 ---

    180 A P Soil and Aggregates ืงืจืงืขื•ืช ื•ืื’ืจื’ื˜ื™ื Determination of Micro-Deval Resistance to Wear of

    Railway Ballast

    ืงื‘ื™ืขืช ื”ืชื ื’ื“ื•ืช ืœืฉื—ื™ืงื” ื‘ืฉื™ื˜ืช ืžื™ืงืจื•ื“ื‘ืœ

    13450 2002 annex E ---

    181 A P Soil and Aggregates ืงืจืงืขื•ืช ื•ืื’ืจื’ื˜ื™ื Determination of minimum density index of soil

    ืงื‘ื™ืขืช ืื™ื ื“ืงืก ืฆืคื™ืคื•ืช ืžื™ื ื™ืžืืœื™ืช ืฉืœ ืงืจืงืขื•ืช

    ASTM D 4254 ---

    182 A P; P1; P2;P3;

    P4; P5;

    Soil and fine aggregate ื“ืงื™ื ืื’ืจื’ื˜ื™ืืงืจืงืขื•ืช ื• Sand equivalent value ื‘ื“ื™ืงืช ืฉื•ื•ื” ืขืจืš ื—ื•ืœ ASTM-D-2419 ---

  • 037 Accreditation No. ISO/IEC 17025; 2005 Testing Laboratory Department:

    Schedule of Accreditation

    Site: P or T or M, P-Permanent, T-Temporary, M-Mobile

    Type of Scopes: A- Fixed, C- Flexible scope in analytical tests: Type of matrix, analytes, experimental systems and/or analytical characteristics may be subject to changes, in accordance with the laboratory's

    approved and documented procedures. For details, please refer to the list of Accredited Tests, available from the laboratory upon request.

    Date of issue 12.07.2017 Version No. 17 Page No. 33 of: 49 The certificate attached is an integral part of the schedule and is numbered identically ื”ืชืขื•ื“ื” ื”ืžืฆื•ืจืคืช ืœื ืกืคื— ื–ื” ืžื”ื•ื•ื” ื—ืœืง ื‘ืœืชื™ ื ืคืจื“ ืžืžื ื• ื•ืžืกืคืจื” ื–ื”ื” ืœืžืกืคืจ ื”ื ืกืคื—

    Item Scope

    Type

    Site Materials / Products Tested Types of Test / Properties Measured Standard / Method Opinion and

    Interpretation

    Remarks

    Group of Products: Soil and Paving - Soil, Aggregates and Water :ื•ืžื™ื ืื’ืจื’ื˜ื™ืืงืจืงืข -ืงืจืงืข ื•ืกืœื™ืœื” ืžืฉืคื—ืช ืžื•ืฆืจื™ื

    Chemical and Physical Testing ื‘ื“ื™ืงื•ืช ื›ื™ืžื™ื•ืช ื•ืคื™ื–ื™ืงืœื™ื•ืช

    183 A P;P1; P2;P3; P4; P5;

    Soil and fine aggregates ื“ืงื™ื ืื’ืจื’ื˜ื™ืืงืจืงืข ื• Sand equivalent value

    SI 1865 part 3 chapter 6 ืขืจืš ื—ื•ืœื‘ื“ื™ืงืช ืฉื•ื•ื” ---

    Based on ASTM D 2419

    184 A P;P1; P2;P3;

    P4

    Soil and rock ืงืจืงืข ื•ืกืœืข Laboratory determination of water (moisture) content

    ASTM-D-2216 ืชื›ื•ืœืช ืžื™ื ื‘ืžืขื‘ื“ื”---

    Included Bentonite suspension and

    powder

    ื‘ื ื˜ื•ื ื™ื™ื˜ืœืจื‘ื•ืช ืื‘ืงื” ื•ืชืจื—ื™ืฃ

    185 A P1;P2 Soil and soil-aggregate mixtures

    ืงืจืงืขื•ืช ื•ืชืขืจื•ื‘ื•ืช ืงืจืงืข ื•ืื’ืจื’ืื˜

    CBR (California Bearing

    Ratio)

    ื‘ืžืฆื‘ ื ืช ืชืกื‘ื•ืœืช ืงืœื™ืคื•ืจื ื™ืชืž ืจื•ื•ื™ื”

    ASTM-D-1883 ---

    The compaction based on:

    ASTM-D-1557 method D

    186 A P1 Soil and soil-aggregate mixtures

    ืงืจืงืขื•ืช ื•ืชืขืจื•ื‘ื•ืช ืงืจืงืข ื•ืื’ืจื’ืื˜

    CBR (Cali