test results for cisco unified communications system release 10 · cuc ciscounityconnection...

Test Results for Cisco Unified Communications System Release 10.6for JapanFirst Published: December 08, 2014

Last Modified: January 05, 2015

Americas HeadquartersCisco Systems, Inc.170 West Tasman DriveSan Jose, CA 95134-1706USAhttp://www.cisco.comTel: 408 526-4000 800 553-NETS (6387)Fax: 408 527-0883

C O N T E N T S

C H A P T E R 1 Cisco Unified Communications System Test 1

Cisco Unified Communications System Test 1

Cisco Unified Communications System Test for Japan 2

Acronyms 3

C H A P T E R 2 Test Topology and Environment Matrix 9

Test Topology 10

Environment Matrix 12

Open Caveats 16

What's New? 17

C H A P T E R 3 Test Results Summary 19

Cisco Unified Communications Manager 19

Cisco TelePresence Video Communication Server 24

Cisco Jabber for iPhone and iPad 51

Cisco Jabber for Android 57

Cisco Jabber for Windows 60

Cisco Jabber for Mac 61

Cisco Unified Survivable Remote Site Telephony 64

Cisco Unity Connection 66

Cisco Virtualization Experience Media Engine for Windows 67

Cisco TelePresence Multipoint Control Unit 69

Cisco TelePresence Management Suite 74

Cisco TelePresence Conductor 77

Cisco TelePresence Server 87

Cisco Jabber Guest 91

Cisco Collaboration Expressway 98

Cisco Prime Collaboration 109

Test Results for Cisco Unified Communications System Release 10.6 for Japan iii

Cisco Prime Collaboration Provisioning 109

Cisco Prime Collaboration Assurance 123

Cisco Prime Collaboration Analytics 134

Cisco Unified Communication System Upgrade / Migration Test 144

Upgrade Paths 144

Upgrade 6.1.5 to 10.5.2 146

Upgrade 7.1.5 to 10.5.2 148

Upgrade 8.5.1 to 10.5.2 150

Upgrade 8.6.2 to 10.5.2 152

Upgrade 9.1.2 to 10.5.2 154

Upgrade 10.5.1 to 10.5.2 156

Regression 158

Related Documentation 160

Test Results for Cisco Unified Communications System Release 10.6 for Japaniv

Contents

C H A P T E R 1Cisco Unified Communications System Test

• Cisco Unified Communications System Test, page 1

• Cisco Unified Communications System Test for Japan, page 2

• Acronyms, page 3

Cisco Unified Communications System TestCisco Unified Communications System Test, an integral part of the Enterprise Voice Solution Managementis a program that validates and tests specified systems-level solution for the various products and platformsin the Cisco Unified Communications System.

Cisco Unified Communications System Test, the systems integration layer, ensures that the UnifiedCommunications components delivered across the various engineering teams when combined, improves theUnified Communications System software quality. This is achieved by testing the various components.

The requirements for Cisco Unified Communications System Test is derived based on the following:

• Popular customer scenarios

• Input from various Business Units, fields and Cisco Services

The test bed architecture is built based on the Solution Reference Network Design (SRND), cross-section ofproduct deployment models etc. The different types of testing carried out as part of Cisco UnifiedCommunications System Test are:

• Interoperability/Compatibility

• Functionality

• Availability/Reliability/Stability

• Performance/Scalability/Capacity

• Usability/Serviceability

• Special focus area - CAP (Customer Assurance Program)/Technical Assistance Center (TAC)

• Security

Test Results for Cisco Unified Communications System Release 10.6 for Japan 1

Cisco Unified Communications System Test for JapanCisco Unified Communications System Test for Japan, in turn is an add-on testing at the solution level, wherethe requirements gathered are specific to Japanese usage and market. The requirements are derived based onthe following:

• Customer found defects in selected UC products

• High priority cases that are covered by the Cisco Unified Communications System Test team

• Inputs from SEs, TAC team of Cisco Japan

The test execution is carried out on selected UC products, which affect the Japanese segment and that areprioritized by SEs of the Cisco Japan team. Japanese specific equivalents, such as Japanese locale, ISDNSwitch type being NTT, JPNP for Numbering Plan are implemented.

The objective of Cisco Unified Communications System Test for Japan is to run a sub-set of system testingthat is not covered by Cisco Unified Communications System Test and implement equivalents with Japaneseenvironment such as Japanese OS, localized application, select Cisco Compatible Products, and third partyequipment.

In this Cisco Unified Communications System Test release for Japan, the following components are tested.

• Cisco Unified Communications Manager

• Cisco TelePresence Video Communication Server

• Cisco TelePresence Video Communication Server Expressway

• Cisco Jabber for iPhone and iPad

• Cisco Jabber for Android

• Cisco Jabber for Windows

• Cisco Jabber for Mac

• Cisco Unified Border Element

• Cisco Unified Survivable Remote Site Telephony

• Cisco Unified Communications Manager IM and Presence

• Cisco Unity Connection

• Cisco Unified Attendant Console

• Cisco UC Integration ™ for Microsoft Lync

• Cisco Virtualization Experience Media Engine for Windows

• Cisco TelePresence Multipoint Control Unit

• Cisco TelePresence Management Suite

• Cisco TelePresence Conductor

• Cisco TelePresence Server 7010

• Cisco TelePresence Server on VM

Test Results for Cisco Unified Communications System Release 10.6 for Japan2

Cisco Unified Communications System TestCisco Unified Communications System Test for Japan

• Cisco Jabber Guest

• Cisco Collaboration Expressway

• Cisco Prime Collaboration

• Upgrade

AcronymsDescriptionAcronym

Automated Alternate RoutingAAR

Automatic Call DistributionACD

Alternate Contact NumberACN

Automatic Gain ControlAGC

Audible Message Waiting IndicatorAMWI

Alternate Network Address TranslationANAT

Adaptive Security ApplianceASA

American Standard Code for Information InterchangeASCII

Analog Telephone AdapterATA

Bulk Administration ToolBAT

Busy Lamp FieldBLF

Certificate AuthorityCA

CDR Analysis and ReportingCAR

Channel Associated SignalingCAS

Call Control DiscoveryCCD

Cisco Desktop AdministratorCDA

Cisco Discovery ProtocolCDP

Call Detail RecordCDR

Caller Entered DigitsCED

Call Forward AllCFA

Call Forward BusyCFB

Customer Found DefectCFD

Call Forward No AnswerCFNA

Call Forward No CoverageCFNC


Cisco Unified Communications System TestAcronyms

DescriptionAcronym

Call Forward UnregisteredCFUR

Cisco Unified IP CommunicatorCIPC

Cisco Jabber for AndroidCJA

Cisco Jabber for iPhoneCJI

Cisco Jabber for MacCJM

Cisco Jabber for iPadCJIPad

Cisco Jabber for WindowsCJW

Command Line InterfaceCLI

Calling Line IdentificationCLID

Client Matter CodeCMC

Cisco Unified Communications Manager ExpressCME

Clustering over WANCoW

Cisco Prime CollaborationCPC

Client Services FrameworkCSF

Calling Search SpaceCSS

Computer Telephony InterfaceCTI

Computer Telephony IntegrationCTI

Certificate Trust ListCTL

Cisco Unified Attendant ConsoleCUAC

Cisco Unified Border ElementCUBE

Cisco Unity ConnectionCUC

Cisco UC Integration ™ for Microsoft LyncCUCI-Lync

Cisco Unified Communications ManagerCUCM

Cisco Unified Communications Manager IM and PresenceCUCM IM and Presence

Cisco Unified PresenceCUP

Cisco Unified Personal CommunicatorCUPC

Device and Credential RepositoryDCR

Dynamic Host Configuration ProtocolDHCP

Direct In-Ward DialingDID

Directory NumberDN

Do Not DisturbDND



DescriptionAcronym

Delayed OfferDO

Digital Private Network Signaling SystemDPNSS

Disaster Recovery SystemDRS

Differentiated Services Code PointDSCP

Device Work CenterDWC

Extended Display Identification DataEDID

Enterprise License ManagerELM

Extension MobilityEM

Extension Mobility Cross ClusterEMCC

Early OfferEO

Cisco Enhanced Survivable Remote Site TelephonyE-SRST

Forced Authorization CodeFAC

Foreign Exchange OfficeFXO

Foreign Exchange StationFXS

Graphical User InterfaceGUI

GatewayGW

High AvailabilityHA

High DefinitionHD

Historical ReportingHR

Hyper Text Markup LanguageHTML

Hosted Virtual DesktopHVD

Inter Cluster TrunkICT

Identity ProviderIdP

Instant MessagingIM

IP Phone MessengerIPPM

IP Service Level AgreementsIPSLA

Integrated Services Digital NetworkISDN

Indian Standard TimeIST

Initial Trust ListITL

Key Expansion ModuleKEM

Log Collection CenterLCC



DescriptionAcronym

Lightweight Directory Access ProtocolLDAP

Malicious Caller IDMCID

Media Convergence ServerMCS

Multipoint Control UnitMCU

MultiDimensional eXpressionsMDX

Media Gateway Control ProtocolMGCP

Multilevel Precedence and PreemptionMLPP

Music On HoldMOH

Media Resource Group ListMRGL

Managed Service ProviderMSP

Message Waiting IndicatorMWI

Network Interface and Configuration EngineNICE

Non Linear ProcessingNLP

New Technology LAN Manager version 2NTLMv2

Network Time ProtocolNTP

Operations ManagerOM

On Screen DisplayOSD

Product Authorization KeyPAK

Personal Communication AssistantPCA

Prime Collaboration DeploymentPCD

PC over IPPCoIP

Peer Firmware SharingPFS

Personal Identification NumberPIN

Picture in PicturePiP

Plain Old Telephony SystemPOTS

Primary Rate InterfacePRI

Provisioning Northbound InterfaceProvisioning - NBI

Problem Reporting ToolPRT

Public Switched Telephone NetworkPSTN

Quality Report ToolQRT

Q-Signaling protocolQSIG



DescriptionAcronym

Really Simple SyndicationRSS

Real Time Control ProtocolRTCP

Real Time Monitoring ToolRTMT

Realtime Transport ProtocolRTP

Security Assertion Markup LanguageSAML

Skinny Client Control ProtocolSCCP

Standard DefinitionSD

Service Enabling PlatformSEP

Session Initiation ProtocolSIP

Small and Midsize BusinessSMB

Cisco Unified Survivable Remote Site TelephonySRST

Secure ShellSSH

Secure Socket LayerSSL

Single Sign OnSSO

Technical Assistant CenterTAC

Transmission Control ProtocolTCP

Transport Layer SecurityTLS

TelePresence Management SuiteTMS

The New PhoneTNP

Trust Relay PointTRP

TelePresence ServerTS

Telephony User InterfaceTUI

Unified Computing SystemUCS

User Datagram ProtocolUDP

User Data ServiceUDS

Unified Messaging GatewayUMG

Uniform Resource IdentifierURI

Coordinated Universal TimeUTC

Cisco TelePresence Video Communication ServerVCS

Virtual Desktop InfrastructureVDI

Voice GatewayVGW



DescriptionAcronym

Voice Mail NotificationVMN

View Mail for OutlookVMO

Voice over IPVoIP

Voice Profile for Instant MessagingVPIM

Virtual Private NetworkVPN

Video SLA Assessment AgentVSAA

TelePresence Server on VMVTS

Virtualization Experience Media EngineVXME

Wide Area NetworkWAN

Wireless FidelityWi-Fi

Wireless LAN ControllerWLC

Extensive Application Programming InterfacexAPI

Extensible Markup LanguageXML



C H A P T E R 2Test Topology and Environment Matrix

• Test Topology, page 10

• Environment Matrix, page 12

• Open Caveats, page 16

• What's New?, page 17


Test TopologyFigure 1: Topology in Use


Test Topology and Environment MatrixTest Topology

Upgrade

Figure 2: Topology in Use


Test Topology and Environment MatrixTest Topology

Environment MatrixVersionComponentApplications

10.5.2.10000-5VersionCisco Unified CommunicationsManager

Call Control

10.5.2.1000-1Locale

3-1-9.JPDial Plan

10.5VersionCiscoUnified Survivable RemoteSite Telephony (SRST)

15.4.3 M1IOS

9.0.6VersionCisco Unified SRST Manager

X8.2.2VersionCisco TelePresence VideoCommunication ServerExpressway (VCS) X7.2_LanguagePacks_BETALocale

X8.2.2VersionCisco TelePresence VideoCommunication Server (VCSExpressway) X7.2_LanguagePacks_BETALocale

X8.2.2VersionCisco Expressway-C

X7.2_LanguagePacks_BETALocale

X8.2.2VersionCisco Expressway-E

X7.2_LanguagePacks_BETALocale

10.5.1.10-3VersionCisco Unified Attendant ConsoleApplications

10.5.2.10000-9VersionCisco Unified CommunicationsManager IM and PresenceService 10.5.2.1000-1Locale

10.5.2.10000-5VersionCisco Unity ConnectionVoice Mail andUnified Messaging

10.5.2.1-1Locale


Test Topology and Environment MatrixEnvironment Matrix

VersionComponentApplications

9-4-1-3SIPCisco Unified IP Phone6921/41/61

End Point

9-4-1-3SR1SCCP

9-4-1-3Cisco Unified IP Phone 6945

10-2-1-12Cisco IP Phone 7821/41/61

9-4-2-1SCisco Unified IP Phone7942/62/75

1-4-5-3Cisco UnifiedWireless IP Phone792X

9-3-3-5Cisco Unified IP ConferencePhone 8831

10-2-2-16Cisco IP Phone 8841/8851/8861

9-4-2-8Cisco Unified IP Phone8941/8945

9-4-2-13Cisco Unified IP Phone9951/9971

10-3-1KK0-174Cisco Desktop CollaborationExperience DX650

1-1-0-006Cisco ATA 190 AnalogTelephone Adaptor

9.7(4) ES1Cisco UC Integration™ forMicrosoft Lync

TC 7.2.1EX60 - Cisco TelePresenceSystem EX60

TC 7.2.1EX90 - Cisco TelePresenceSystem EX90

TC 7.2.1SX20 - Cisco TelePresence SX20Quick Set

TC 7.2.1SX80-Cisco TelePresence SX80Codec

TC 7.2.1SX10-Cisco TelePresence SX10Quick Set

TC 7.2.1C90 - Cisco TelePresence SystemIntegrator Package C90

TX6.1.5.1(2)500-32 – Cisco TelePresenceSystem 500 (32)

TX6.1.5.1(2)TX9000 - Cisco TelePresenceSystem TX9000




MX200-G2- Cisco TelePresenceMX200-G2

TC 7.2.1

TC 7.2.1MX300-G2- Cisco TelePresenceMX300-G2

10.6.0.896VersionCisco Prime CollaborationProvisioning

Cisco PrimeCollaboration

10.6.0.56891VersionCisco Prime CollaborationAssurance

2.1(1a)UCSC-C24-M3SCisco C-series ServerUpgrade

ESXi 5.1ESXi host onBlade Server

Hypervisor

MCS 7845 H2HardwareCisco Unified CommunicationsManager

MCS 7845 I2HardwareCisco Unity Connection

MCS 7835 I2HardwareCisco Unified Presence

15.4(3)TIOSVoice Gateway 2951

Voice Gateway 2921

15.0.2-SE 5Cisco 3750Access Switch

15.4.3 M1IOSISR Gateways (3945e, 3925e,3945, 2921)

CommunicationsInfrastructure

3.13.0SIOSISR 4451-X

15.4.3 M1Cisco Unified Border Elementfor ISR

15.0.2-SE 5Cisco 3750 PoE Switch

ESXi 5.1.0VCenter Server

5.2(2 a)M9500MDS Switch

14.5VersionCisco TelePresenceManagementSuite - TMS

TelePresence

4.5 (1.45)VersionMCU 4510 & 5310 - CiscoTelePresence MCU

MCU_4-3_UI_and_audio_JPN.packageLocale

4.0 (2.8)VersionCisco TelePresence Server onVM

XC2.4.1VersionCisco TelePresence Conductor

4.0(2.8)VersionCisco TelePresence Server 7010




7-0-250-0Wireless LAN Controller 4404Wireless andMobility

15.2AutonomousWireless Access Point 1142

12.4LightweightWireless Access Point 3502

10.5.1.194255Cisco Jabber for Mac

10.6.0.47088Cisco Jabber for Windows

10.6.0.196647VersionCisco Jabber for iPhone and iPad

Apple iOS 8.1 (12B411)iPhone 5

Apple iOS 8.1 (12B410)iPad

10.6.0.195947VersionCisco Jabber for Android

Android OS 4.0.3Galaxy SII

Android OS 4.4.2Galaxy S4

Android OS 4.4.2Xperia Z1

10.5VersionCisco Jabber Guest

Windows OS 7Windows

Mac OS 10.9.4Mac

Apple iOS 8.1 (12B411)iPhone 5

Apple iOS 8.1 (12B410)iPad

10.5VersionCisco VXME for Windows

2.1(2a)Cisco UCS6140

Fabric Interconnect PRIMARYUCS


Fabric InterconnectSUBORDINATE


Fabric Cluster

ESXi 5.1.0BladeServer-1

ESXi Host

ESXi 5.1.0C-SeriesServer




Windows 7-SP1 (Japanese)Windows7-SP1

Operating SystemClient

Windows 8/8.1 (Japanese)Windows8/8.1

10.9.4Mac

IE 11 (Supported Japaneselanguage)

IEBrowser

Firefox 29.0.1, Firefox ESR 24, 31(Supported Japanese language)

Mozilla

Chrome 35 (Supported Japaneselanguage)

Chrome

2013Microsoft Lync Client

Windows Server 2008 (R2Enterprise - Japanese)

Microsoft Windows ServerServer

Windows Server 2012

2013Microsoft Exchange Server

2013Microsoft Lync Server

10.0.1.10000-95Cisco MediaSense

2.5.1.28.BCisco WebEx Meetings Server

10.5.2.94Cisco Jabber Guest Server

Open CaveatsTitleDefect ID

Cisco Unified Communications Manager

Handset light strip is blinking continuously when phone is unregisteredCSCur54662

Cisco TelePresence Video Communication Server

'Provisioning' becomes Junk Characters after language change in SX10CSCur60996

Mismatch in count of languages in Remote usage, Touch UI andWeb GUICSCur60216

Last frame to freeze a call to an EX90 from Cisco Jabber GuestCSCur60272

Truncate caller name between jabber guest and TP callCSCur59459

Upgrade

Migration Failure for CUCM 6.1.5 using PCD 10.5.1CSCur58310


Test Topology and Environment MatrixOpen Caveats

What's New?Cisco ATA 190 Analog Telephone Adapter:

The Cisco ATA 190 Analog Telephone Adaptor is a handset-to-Ethernet adaptor that turns traditional telephonedevices into IP devices. It is a low-density analog telephone adapter that connects analog devices to an IPnetwork. The ATA 190 supports two voice ports, each with its own independent telephone number. It has oneRJ45 port that provides access to an Ethernet network.

Cisco IP Phone 8841, 8851 and 8861:

The Cisco IP Phone 8800 Series delivers easy-to-use, highly secure voice communications. New ergonomichardware and software have been designed for ease of use and superior quality voice communications. Navigatemenus more easily with a five-way navigation wheel. Recognize displayed content simply under a variety oflighting conditions with five-inch, widescreen, backlit, high-resolution displays.

Cisco Virtualization Experience Media Engine for Windows:

With the Cisco Virtualization Experience Media Engine (VXME) for Windows software, users can place andreceive calls with their Cisco Unified Communications clients in a virtual environment. The Cisco VirtualizationExperience Media Engine software runs on the endpoint, and the Cisco Unified Communications client andCisco VXME Utilities runs on the Microsoft Windows Hosted Virtual Desktop (HVD), in the data center. Toreduce latency and to enhance media quality, Cisco Virtualization Experience Media Engine streams mediabetween the endpoints without going through the Hosted Virtual Desktops.

Cisco Jabber Guest:

Cisco Jabber Guest lets you invite them in through your website or mobile application to interact with contactcenter agents, remote experts, and other people via video and tour visually through products and services. Nomore requesting a chat and then waiting for a callback. Jabber Guest gives people instant interaction as wellas information. It's a good way to make browsers into buyers. With Cisco Jabber Guest, you can expand yourbusiness reach and reduce costs through more intimate and effective customer interactions. Offer simple,lightweight browser and mobile video calls to customers, partners, and associates, as well as corporate users.

Cisco TelePresence SX10 Quickset:

The SX10 Quick Set is a codec-in-camera unit that easily turns any flat panel into a video collaborationsolution. It is designed to outfit any small room or huddle space with business-quality video, priced to scaleat about the cost of a PC. The SX10 sits at the entry level of our product portfolio, designed to help SMBsadopt video or for scaled deployment in the enterprise. It offers Business-quality video, Simple and elegantcabling system that connects through a single-cable system for both power and Ethernet connectivity. Itsupports high-definition video with up to 1080p30 resolution.

Cisco TelePresence MX200-G2:

The Cisco TelePresence MX200 G2 makes it easy to put high definition video collaboration within reach foreveryone at your organization. It delivers ready-to-use simplicity and high quality performance at value pricingso decisions can be made faster and be more productive and innovative. The MX200 G2 is a value productwithin the MX Series of collaboration room endpoints. It features a sleek, streamlined industrial design thatblends aesthetics, functionality and ease of use at a great value . New features such as dual display and anembedded four-wayMultiSite conferencing option deliver more power and flexibility. The Cisco TelePresenceMX200 G2 is a part of a complete collaboration ecosystem that offers high-quality, easy-to-use TelePresenceexperiences Offers flexible camera features: Cisco TelePresence PrecisionHDCamera with pan, tilt, and zoom


Test Topology and Environment MatrixWhat's New?

helps ensure optimal framing and video clarity. Its dedicated presets provide flexibility and easy viewing forany type of meeting.

Email Notification

The Email Notification feature sends email notifications to the administrator regarding certain task events.You can choose whether to have emails sent for all standard task events (such as when task is scheduled,started, successful, paused, failed and canceled), or only for task errors. Emails will be sent for all types oftasks: cluster discovery, upgrade, migration, switch version, restart, fresh install, readdress.


Test Topology and Environment MatrixWhat's New?

C H A P T E R 3Test Results Summary

• Cisco Unified Communications Manager, page 19

• Cisco TelePresence Video Communication Server, page 24

• Cisco Jabber for iPhone and iPad, page 51

• Cisco Jabber for Android, page 57

• Cisco Jabber for Windows, page 60

• Cisco Jabber for Mac, page 61

• Cisco Unified Survivable Remote Site Telephony , page 64

• Cisco Unity Connection, page 66

• Cisco Virtualization Experience Media Engine for Windows, page 67

• Cisco TelePresence Multipoint Control Unit, page 69

• Cisco TelePresence Management Suite, page 74

• Cisco TelePresence Conductor, page 77

• Cisco TelePresence Server, page 87

• Cisco Jabber Guest, page 91

• Cisco Collaboration Expressway, page 98

• Cisco Prime Collaboration, page 109

• Cisco Unified Communication System Upgrade / Migration Test, page 144

• Regression, page 158

• Related Documentation, page 160

Cisco Unified Communications ManagerDefectsStatusCall Component flowDescriptionTitleLogical ID


PassedIP Phone -> UnifiedCM1 ->MGCPGW ->Unified CM1 ->Analog Phone

Verify whetherthe call isestablishingfrom IP PhonetoAnalog Phonesuccessfully.

Make call fromIP Phone toAnalog Phone.

UCJ10.6S.CUCM.G.63

PassedIP Phone -> UnifiedCM1 -> ICT -> MGCPGW->Unified CM2 ->Analog Phone


Make call fromIP Phone toAnalog Phonevia ICT trunk.

UCJ10.6S.CUCM.G.65

PassedIP Phone A -> UnifiedCM 1 -> IP Phone B ->MGCP GW -> UnifiedCM 2 -> AnalogPhone.


Make call fromIP Phone A toIP Phone B thenIP Phone A callsAnalog Phonewithin the site.

UCJ10.6S.CUCM.G.71

PassedAnalog Phone ->UnifiedCM1 ->MGCPGW -> IP Phone A , IPPhone B -> UnifiedCM1-> MGCP GW ->IP Phone A

Verify whetherthe call back isestablishedbetween AnalogPhone and IPPhonesuccessfully.

Call backfeature for IPPhone toAnalogPhone.

UCJ10.6S.CUCM.G.80

PassedAnalog Phone ->UnifiedCM1 ->MGCPGW -> IP Phone A ->Unified CM1 -> IPPhone B

Verify whetherthe call forwardbusy isestablishedbetween AnalogPhone and IPPhonesuccessfully.

Call forwardbusy feature forIP Phone andAnalog Phone.

UCJ10.6S.CUCM.G.81

PassedAnalog Phone ->UnifiedCM1 ->MGCPGW -> IP Phone A ->Unified CM1 -> IPPhone B

Verify whetherthe call join isestablishedbetween AnalogPhone and IPPhonesuccessfully.

Call join featurefor IP Phoneand AnalogPhone.

UCJ10.6S.CUCM.G.82

PassedIP Phone -> UnifiedCM1 ->MGCPGW ->Analog Phone

Verify whetherthe speed dial isestablished forIP Phone tomake a call toAnalog Phonesuccessfully.

Speed dialfeature for IPPhone to makecall for AnalogPhone.

UCJ10.6S.CUCM.G.83


Test Results SummaryCisco Unified Communications Manager

PassedAnalog Phone ->UnifiedCM1 ->MGCPGW -> IP Phone B

Verify whetherthe call transferis establishedbetween AnalogPhone and IPPhonesuccessfully.

Call transferfeature from IPPhone toAnalogPhone.

UCJ10.6S.CUCM.G.85

PassedIP Phone -> UnifiedCM1 -> SIP -> MGCPGW->Unified CM2 ->Analog Phone


Make call fromIP Phone toAnalog Phonevia SIP trunk

UCJ10.6S.CUCM.G.64

PassedIP Phone A -> UnifiedCM1 -> IP Phone B

Verify whetherthe call is holdand resume fromIP Phone-A toIP Phone-Bsuccessfully.

Make call fromIP Phone-A toIP Phone-B toput the call onhold and resumethe call.

UCJ10.6S.CUCM.G.128

PassedIP Phone A -> UnifiedCM1 -> SIP -> UnifiedCM2 -> IP Phone-B

Verify whetherthe call is holdand resume fromIP Phone-A toIP Phone-B viaSIP trunksuccessfully.

Make call fromIP Phone-A toIP Phone-B toput the call onhold and resumethe call via SIPtrunk.

UCJ10.6S.CUCM.G.130

PassedIP Phone A -> UnifiedCM1 -> ICT ->UnifiedCM2 -> IP Phone B

Verify whetherthe call is holdand resume fromIP Phone-A toIP Phone-B viaICT trunksuccessfully.

Make call fromIP Phone-A toIP Phone-B toput the call onhold and resumethe call via ICTtrunk.

UCJ10.6S.CUCM.G.131

PassedIP Phone A -> UnifiedCM1 -> IP Phone B ->Unified CM1 -> IPPhone C

Verify whetherthe IP Phone-Acall is hold by IPPhone-Csuccessfully.

Check the calltransfer featurefor IP Phonepress the holdsoftkey to putthe call on holdand resume thecall.

UCJ10.6S.CUCM.G.137



PassedIP Phone A -> UnifiedCM1 -> IP Phone B ->Unified CM1 -> IPPhone C

Verify whetherthe IP Phone-Acall is hold andresume by IPPhone-Csuccessfully.

Make theconference callbetween IPPhone-A, B andC then IPPhone-C pressthe hold andresume.

UCJ10.6S.CUCM.G.153

PassedIP Phone A -> UnifiedCM1 -> SIP -> IPPhone B -> UnifiedCM1 -> IP Phone C

Verify whetherthe IP Phone-Acall is hold andresume by IPPhone-Csuccessfully.

Make theconference callbetween IPPhone-A, B andC then IPPhone-C pressthe hold andresume via siptrunk.

UCJ10.6S.CUCM.G.154

PassedIP Phone A -> UnifiedCM1 -> ICT -> IPPhone B -> UnifiedCM2 -> IP Phone C

Verify whetherthe IP Phone-Acall is hold andresume by IPPhone-C via siptrunksuccessfully.

Check the callforward featureand press thehold softkey toput the call onhold and resumethe call via ICTtrunk.

UCJ10.6S.CUCM.G.147

PassedIP Phone A -> UnifiedCM1 -> SIP -> UnifiedCM2 -> IP Phone B

Verify whetherthe call isestablished fromIP Phone-A toIP Phone-Bsuccessfully.

Make a call IPPhone-A to IPPhone-B via siptrunk byregistering thetwo IP Phonesin secondaryserver.

UCJ10.6S.CUCM.G.165

PassedIP Phone A -> UnifiedCM1 -> Unified CM2-> IP Phone B

Verify whetherthe call is holdand resume fromIP Phone-A toIP Phone-B viaPSTN trunksuccessfully.

Make call fromIP Phone-A toIP Phone-B toput the call onhold and resumethe call viaPSTN trunk.

UCJ10.6S.CUCM.G.132

PassedIP Phone A -> UnifiedCM1 -> SIP -> IPPhone B -> UnifiedCM2 -> IP Phone C

Verify whetherthe IP Phone-Acall is hold andresume by IPPhone-C via siptrunksuccessfully.

Check the callforward featureand press thehold softkey toput the call onhold and resumethe call via siptrunk.

UCJ10.6S.CUCM.G.146



PassedIP Phone A -> UnifiedCM -> IP Phone B ->Unified CM -> IPPhone C

Verify whetherthe call isestablished fromIP Phone-A toIP Phone-B andIP Phone-A toIP Phone-Csuccessfully.

Check whetherthe conferenceis establishedbetween the IPPhones when itis registered inthe secondaryserver.

UCJ10.6S.CUCM.G.174

PassedIP Phone A -> UnifiedCM -> ATA 190

Verify whethercall made toATA 190 whenline1 and line2of ATA is inshared line issuccessful

Make a call toATA 190 whenline1 and line2of ATA is inshared line

UCJ10.6S.CUCM.G.501

PassedATA 190 -> UnifiedCM -> IP Phone A

Verify whethercall made fromline1of ATA190 to other IPPhone, whenline1 and line2of ATA is inshared line issuccessful

Make a callfrom line1 ofATA 190 toother IP Phone,when line1 andline2 of ATA isin shared line

UCJ10.6S.CUCM.G.502

PassedIP Phone A -> UnifiedCM -> ATA 190

Verify whetherspeed dial toATA 190 fromIP Phone A issuccessful

Speed dial toATA 190 fromIP Phone A

UCJ10.6S.CUCM.G.503

PassedIP Phone A -> UnifiedCM -> ATA 190 ->Unified CM -> IPPhone B

Verify whethercall forward allfrom ATA 190to other IPPhone aresuccessful

Call ForwardAll from ATA190 to other IPPhones

UCJ10.6S.CUCM.G.504

PassedIP Phone A -> UnifiedCM -> ATA 190 ->Unified CM -> IPPhone B -> UnifiedCM -> ATA 190 -> IPPhone C

Verify whethercall forwardbusy from ATA190 to other IPPhone aresuccessful

Call Forwardbusy from ATA190 to other IPPhones

UCJ10.6S.CUCM.G.505

PassedIP Phone A -> UnifiedCM -> ATA 190 ->Unified CM -> IPPhone B

Verify whethercall forward noanswer fromATA 190 toother IP Phoneare successful

Call Forward noanswer fromATA 190 toother IP Phones

UCJ10.6S.CUCM.G.506



PassedIP Phone A -> UnifiedCM -> ATA 190(Line1) -> Unified CM-> ATA 190 (Line 2)

Verify whethercall forward allfrom line1 ofATA 190 toline2 of ATA190 is successful

Call ForwardAll from line1of ATA 190 toline2 of ATA190

UCJ10.6S.CUCM.G.507

PassedIP Phone A -> UnifiedCM -> ATA 190(Line1) -> Unified CM-> IP Phone B -> ATA190 (Line 1) -> UnifiedCM -> ATA 190(Line2)

Verify whethercall forwardbusy from line1of ATA 190 toline2 of ATA190 is successful

Call ForwardBusy from line1of ATA 190 toline2 of ATA190

UCJ10.6S.CUCM.G.508

PassedIP Phone A -> UnifiedCM -> ATA 190(Line1) -> Unified CM-> ATA 190 (Line 2)

Verify whethercall forward noanswer fromline1 of ATA190 to line2 ofATA 190 issuccessful

Call ForwardNo Answerfrom line1 ofATA 190 toline2 of ATA190

UCJ10.6S.CUCM.G.509

PassedNAVerify whetherthere is an iconor picture ofATA 190available in theUnified CMSelf-Care portal

ATA 190 iconor picture inSelf-Care portal

UCJ10.6S.CUCM.G.510

CSCur54662FailedNAVerify whetherthe Handsetlight strip of88xx phones arenot blinkingcontinuouslywhile pressingthe volume upor down key andwhen phoneremainsunregistered

Function ofhandset lightstrip in 88xx IPPhones whenphone isunregistered

UCJ10.6S.CUCM.G.95

Cisco TelePresence Video Communication ServerDefectsStatusCall Component

FlowDescriptionTitleLogical ID


Test Results SummaryCisco TelePresence Video Communication Server

PassedSX80Codec(H.323) ->Cisco VCS ControlA -> Cisco VCSExpressway ->Cisco VCS ControlB -> EX90(H.323)

Verify whether thevideo call from CiscoTelePresence SX80Codec registered asH.323 in CiscoTelePresence VideoCommunicationServer Control A toCisco TelePresenceSystem EX90registered as H.323 inCisco TelePresenceVideoCommunicationServer Control B viaCisco TelePresenceVideoCommunicationServer Expresswayworks successfully

MakingH.323 callfrom SX80Codec toEX90 viaCisco VCSExpressway

UCJ10.6S.VCS.G.001

PassedSX80 Codec ->Cisco VCS ControlA -> Cisco VCSExpressway ->Cisco VCS ControlB -> EX90

Verify whether thevideo call from CiscoTelePresence SX80Codec registered asSIP in CiscoTelePresence VideoCommunicationServer Control A toCisco TelePresenceSystem EX90registered as SIP inCisco TelePresenceVideoCommunicationServer Control B viaCisco TelePresenceVideoCommunicationServer Expresswayworks successfully

Making SIPcall fromSX80 Codecto EX90 viaCisco VCSExpressway

UCJ10.6S.VCS.G.002



PassedSX80Codec(H.323) ->Cisco VCS ControlA -> Cisco VCSExpressway ->Cisco VCS ControlB -> EX90(H.323)SX80Codec(H.323) ->Add participant ->Cisco VCS ControlA -> Cisco VCSExpressway ->Cisco VCS ControlB -> EX60(H.323)

Verify whethermultisite conferencebetween CiscoTelePresence SX80Codec registered asH.323 in CiscoTelePresence VideoCommunicationServer Control A,Cisco TelePresenceSystem EX90 andCisco TelePresenceSystem EX60 whichare registered asH.323 in CiscoTelePresence VideoCommunicationServer Control B viaCisco TelePresenceVideoCommunicationServer Expresswayworks successfully

Multisiteconferencecall fromSX80 Codecregistered asH.323 viaCisco VCSExpressway

UCJ10.6S.VCS.G.003

PassedSX80 Codec ->Cisco VCS ControlA -> Cisco VCSExpressway ->Cisco VCS ControlB -> EX90SX80 Codec ->Add participant ->Cisco VCS ControlA -> Cisco VCSExpressway ->Cisco VCS ControlB -> EX60

Verify whethermultisite conferencebetween CiscoTelePresence SX80Codec registered asSIP in CiscoTelePresence VideoCommunicationServer Control A,Cisco TelePresenceSystem EX90 andCisco TelePresenceSystem EX60 whichare registered as SIPin Cisco TelePresenceVideoCommunicationServer Control B viaCisco TelePresenceVideoCommunicationServer Expresswayworks successfully

Multisiteconferencecall fromSX80 Codecregistered asSIP via CiscoVCSExpressway

UCJ10.6S.VCS.G.004



PassedSX80 Codec(H.323) -> CiscoVCS Control A ->Cisco VCSExpressway ->Cisco VCS ControlB -> EX90 (H.323)-> Hold/Resume

Verify whether holdand resume for thevideo call from CiscoTelePresence SX80Codec registered asH.323 in CiscoTelePresence VideoCommunicationServer Control A toCisco TelePresenceSystem EX90registered as H.323 inCisco TelePresenceVideoCommunicationServer Control B viaCisco TelePresenceVideoCommunicationServer Expresswayworks successfully

Hold/ResumeH.323 callfrom SX80Codec toEX90 viaCisco VCSExpressway

UCJ10.6S.VCS.G.005

PassedSX80 Codec ->Cisco VCS ControlA -> Cisco VCSExpressway ->Cisco VCS ControlB -> EX90 ->Hold/Resume

Verify whether holdand resume for thevideo call from CiscoTelePresence SX80Codec registered asSIP in CiscoTelePresence VideoCommunicationServer Control A toCisco TelePresenceSystem EX90registered as SIP inCisco TelePresenceVideoCommunicationServer Control B viaCisco TelePresenceVideoCommunicationServer Expresswayworks successfully

Hold/ResumeSIP call fromSX80 Codecto EX90 viaCisco VCSExpressway

UCJ10.6S.VCS.G.006



PassedSX80Codec(H.323) ->Cisco VCS ControlA -> Cisco VCSExpressway ->Cisco VCS ControlB -> EX90(H.323)SX80Codec(H.323) ->Add participant ->Cisco VCS ControlA -> Cisco VCSExpressway ->Cisco VCS ControlB -> EX60(H.323)-> Hold/Resume

Verify whetherHold/Resume for amultisite conferencebetween CiscoTelePresence SX80Codec registered asH.323 in CiscoTelePresence VideoCommunicationServer Control A,Cisco TelePresenceSystem EX90 andCisco TelePresenceSystem EX60 whichare registered asH.323 in CiscoTelePresence VideoCommunicationServer Control B viaCisco TelePresenceVideoCommunicationServer Expresswayworks successfully

Hold/ResumeMultisiteconferencecall fromSX80 Codecregistered asH.323 viaCisco VCSExpressway

UCJ10.6S.VCS.G.007

PassedSX80 Codec ->Cisco VCS ControlA -> Cisco VCSExpressway ->Cisco VCS ControlB -> EX90SX80 Codec ->Add participant ->Cisco VCS ControlA -> Cisco VCSExpressway ->Cisco VCS ControlB -> EX60 ->Hold/Resume

Verify whetherHold/Resume for amultisite conferencebetween CiscoTelePresence SX80Codec registered asSIP in CiscoTelePresence VideoCommunicationServer Control A ,Cisco TelePresenceSystem EX90 andCisco TelePresenceSystem EX60 whichare registered as SIPin Cisco TelePresenceVideoCommunicationServer Control B viaCisco TelePresenceVideoCommunicationServer Expresswayworks successfully

Hold/ResumeMultisiteconferencecall fromSX80 Codecregistered asSIP via CiscoVCSExpressway

UCJ10.6S.VCS.G.008



PassedSX80 Codec ->Cisco VCS ControlA -> Cisco VCSExpressway ->Cisco VCS ControlB -> EX60SX80 Codec ->Transfer -> CiscoVCS Control A ->Cisco VCSExpressway ->Cisco VCS ControlB -> EX90

Verify whether thecall transfer fromCisco TelePresenceSX80 Codecregistered as SIP inCisco TelePresenceVideoCommunicationServer Control A toCisco TelePresenceSystem EX90registered as SIP inCisco TelePresenceVideoCommunicationServer Control B viaCisco TelePresenceVideoCommunicationServer Expresswayworks successfully

Call transferfrom SX80Codec toEX90 viaCisco VCSExpressway

UCJ10.6S.VCS.G.009

PassedSX80Codec(H.323) ->Cisco VCS ControlA -> Cisco VCSExpressway ->Cisco VCS ControlB -> EX90(H.323)SX80Codec(H.323) ->Hold and Place anew call -> CiscoVCS Control A ->Cisco VCSExpressway ->Cisco VCS ControlB -> EX60(H.323)

Verify whether CiscoTelePresence SX80Codec registered asH.323 in CiscoTelePresence VideoCommunicationServer Control A canhold the call withCisco TelePresenceSystem EX90registered as H.323 inCisco TelePresenceVideoCommunicationServer Control B andplace a new call toCisco TelePresenceSystem EX60registered as H.323 inCisco TelePresenceVideoCommunicationServer Control B viaCisco TelePresenceVideoCommunicationServer Expressway

Holdingcurrent calland placingnew call fromSX80 Codecregistered asH.323 viaCisco VCSExpressway

UCJ10.6S.VCS.G.010



PassedSX80 Codec(H.323) -> CiscoVCS Control A ->Cisco VCSExpressway ->Cisco VCS ControlB -> EX90 (H.323)SX80 Codec(H.323) -> Holdand Place a newcall -> Cisco VCSControl A -> CiscoVCS Expressway-> Cisco VCSControl B -> EX60(H.323)

Verify whether CiscoTelePresence SX80Codec registered asSIP in CiscoTelePresence VideoCommunicationServer Control A canhold the call withCisco TelePresenceSystem EX90registered as SIP inCisco TelePresenceVideoCommunicationServer Control B andplace a new call toCisco TelePresenceSystem EX60registered as SIP inCisco TelePresenceVideoCommunicationServer Control B viaCisco TelePresenceVideoCommunicationServer Expressway

Holdingcurrent calland placing anew call fromSX80 Codecregistered asSIP via CiscoVCSExpressway

UCJ10.6S.VCS.G.011

PassedSX80Codec(H.323) ->Cisco VCS ControlA -> Cisco VCSExpressway ->Cisco VCS ControlB -> EX90(H.323)-> Presentationsharing

Verify whether thepresentation is sharedfrom CiscoTelePresence SX80Codec registered asH.323 in CiscoTelePresence VideoCommunicationServer Control A toCisco TelePresenceSystem EX90registered as H.323 inCisco TelePresenceVideoCommunicationServer Control B viaCisco TelePresenceVideoCommunicationServer Expresswayworks successfully

PresentationsharingbetweenSX80 Codecand EX90registered asH.323 viaCisco VCSExpressway

UCJ10.6S.VCS.G.012



PassedSX80 Codec ->Cisco VCS ControlA -> Cisco VCSExpressway ->Cisco VCS ControlB -> EX90 ->Presentationsharing

Verify whether thepresentation is sharedfrom CiscoTelePresence SX80Codec registered asSIP in CiscoTelePresence VideoCommunicationServer Control A toCisco TelePresenceSystem EX90registered as SIP inCisco TelePresenceVideoCommunicationServer Control B viaCisco TelePresenceVideoCommunicationServer Expresswayworks successfully

PresentationsharingbetweenSX80 Codecand EX90registered asSIP via CiscoVCSExpressway

UCJ10.6S.VCS.G.013

PassedSX80Codec(H.323) ->Cisco VCS ControlA -> Cisco VCSExpressway ->Cisco VCS ControlB -> EX90(H.323)SX80Codec(H.323) ->Add participant ->Cisco VCS ControlA -> Cisco VCSExpressway ->Cisco VCS ControlB -> EX60(H.323)-> Presentationsharing

Verify whetherpresentation sharingin Cisco TelePresenceSX80 Codecregistered as H.323 inCisco TelePresenceVideoCommunicationServer Control Aduring multisiteconference with CiscoTelePresence SystemEX90 and CiscoTelePresence SystemEX60 which areregistered as H.323 inCisco TelePresenceVideoCommunicationServer Control B viaCisco TelePresenceVideoCommunicationServer Expresswayworks successfully

Multisiteconferencecall fromSX80 Codecregistered asH.323 andpresentationsharing viaCisco VCSExpressway

UCJ10.6S.VCS.G.014



PassedSX80 Codec ->Cisco VCS ControlA -> Cisco VCSExpressway ->Cisco VCS ControlB -> EX90SX80 Codec ->Add participant ->Cisco VCS ControlA -> Cisco VCSExpressway ->Cisco VCS ControlB -> EX60 ->Presentationsharing

Verify whetherpresentation sharingin Cisco TelePresenceSX80 Codecregistered as SIP inCisco TelePresenceVideoCommunicationServer Control Aduring multisiteconference with CiscoTelePresence SystemEX90 and CiscoTelePresence SystemEX60 which areregistered as SIP inCisco TelePresenceVideoCommunicationServer Control B viaCisco TelePresenceVideoCommunicationServer Expresswayworks successfully

Multisiteconferencecall fromSX80 Codecregistered asSIP andpresentationsharing viaCisco VCSExpressway

UCJ10.6S.VCS.G.015

PassedNAVerify whether theEDID(ExtendedDisplay IdentificationData) information ofCisco TelePresenceSystem EX60 isdisplayed using thecommand 'xStatusVideo Output' in xAPI

ShowingEDIDinformationabout EX60display

UCJ10.6S.VCS.G.016

PassedNAVerify whether theEDID(ExtendedDisplay IdentificationData) information ofCisco TelePresenceSX80 Codec isdisplayed using thecommand 'xStatusVideo Output' in xAPI

ShowingEDIDinformationabout SX80Codec display

UCJ10.6S.VCS.G.017



Passed500-32 -> UnifiedCM ->SX80Codec->Hold/Transfer ->Unified CM ->TX9000

Verify whether theconsultative calltransfer from CiscoTelePresence SX80Codec registered withCisco UnifiedCommunicationsManager to CiscoTelePresence TX9000works successfully

Consultativecall transferfrom SX80Codecregisteredwith UnifiedCM toTX9000

UCJ10.6S.VCS.G.018

Passed500-32 -> UnifiedCM ->SIPTrunk->CiscoVCS-> SX80Codec ->Hold/Transfer->Cisco VCS -> SIPTrunk -> UnifiedCM -> TX9000

Verify whether theconsultative calltransfer from CiscoTelePresence SX80Codec registered withCisco TelePresenceVideoCommunicationServer to CiscoTelePresence TX9000registered with CiscoUnifiedCommunicationsManager workssuccessfully

Consultativecall transferfrom SX80Codecregisteredwith CiscoVCS toTX9000

UCJ10.6S.VCS.G.019

Passed500-32 -> UnifiedCM ->SX80Codec-> Add -> UnifiedCM -> TX9000 &EX60->VideoConference

Verify whethermultisite conferencewith four participantsin Cisco TelePresenceSX80 Codecregistered with CiscoUnifiedCommunicationsManager

Makingmultisiteconferencewith fourparticipants inSX80 Codecregisteredwith UnifiedCM

UCJ10.6S.VCS.G.020

Passed500-32 -> UnifiedCM -> SIP Trunk-> Cisco VCS ->SX80 Codec ->Add ->Cisco VCS-> SIP Trunk->Unified CM ->TX9000&EX60->Video Conference

Verify whethermultisite conferencewith four participantsin Cisco TelePresenceSX80 Codecregistered with CiscoTelePresence VideoCommunicationServer

Makingmultisiteconferencewith fourparticipants inSX80 Codecregisteredwith CiscoVCS

UCJ10.6S.VCS.G.021



PassedSX80 Codec ->Cisco VCS ->EX90 SX80 Codec-> Add participant-> Cisco VCS ->EX60 ->Hold/Resume

Verify whether holdand resume is workingsuccessfully duringmultisite conferencebetween CiscoTelePresence SX80Codec ,CiscoTelePresence SystemEX90 and CiscoTelePresence SystemEX60 when all areregistered in CiscoTelePresence VideoCommunicationServer

Hold/Resumemultisiteconferencecall fromSX80 Codec

UCJ10.6S.VCS.G.022

PassedSX80Codec(H.323) ->Cisco VCS ->EX90(H.323) ->Presentationsharing

Verify whether thepresentation is sharedfrom CiscoTelePresence SX80Codec to CiscoTelePresence EX90successfully whenboth are registered asH.323 in CiscoTelePresence VideoCommunicationServer

MakingH.323 callfrom SX80Codec toEX90 andsharingpresentation

UCJ10.6S.VCS.G.023

PassedSX80Codec(H.323) ->Cisco VCS ->EX90(H.323) ->Hold/Resume

Verify whether holdand resume for thevideo call from CiscoTelePresence SX80Codec to CiscoTelePresence EX90works successfullywhen both areregistered as H.323 inCisco TelePresenceVideoCommunicationServer

Hold/ResumeH.323 callfrom SX80 toEX90

UCJ10.6S.VCS.G.024



Passed500-32 -> UnifiedCM -> TX9000 ->Add and merge ->Unified CM ->SX80 Codec

Verify whether thecall with CiscoTelepresence SX80Codec is merged withthe existing call ofCisco TelepresenceSystem 500-32 inCisco TelepresenceSystem TX9000where all areregistered with CiscoUnifiedCommunicationsManager

MergingSX80 Codeccall with500-32 call inTX9000

UCJ10.6S.VCS.G.025

Passed500-32 -> UnifiedCM ->SX80Codec-> Add -> UnifiedCM -> TX9000

Verify whether CiscoTelePresence TX9000registered with CiscoUnifiedCommunicationsManager can be addedfor multisiteconference fromCiscoTelePresence SX80Codec registered withCisco UnifiedCommunicationsManager

AddingTX9000 formultisiteconferencefrom SX80Codecregisteredwith UnifiedCM

UCJ10.6S.VCS.G.026

Passed500-32 -> UnifiedCM -> SIP Trunk-> Cisco VCS ->SX80 Codec ->Add ->Cisco VCS-> SIP Trunk ->Unified CM ->TX9000

Verify whether CiscoTelePresence TX9000registered with CiscoUnifiedCommunicationsManager can be addedfor multisiteconference fromCiscoTelePresence SX80Codec registered withCisco TelePresenceVideoCommunicationServer

AddingTX9000 formultisiteconferencefrom SX80Codecregisteredwith CiscoVCS

UCJ10.6S.VCS.G.027



Passed500-32 -> UnifiedCM cluster2 ->SX80 Codec ->Add ->Unified CMcluster2 -> SIPTrunk ->UnifiedCM cluster 1 ->TX9000

Verify whether CiscoTelePresence TX9000registered with CiscoUnifiedCommunicationsManager cluster1 canbe added for multisiteconference fromCiscoTelePresence SX80Codec registered withCisco UnifiedCommunicationsManager cluster2

Inter-clustermultisiteconferencecall fromSX80 Codecto TX9000

UCJ10.6S.VCS.G.028

Passed500-32 -> UnifiedCM -> TX9000SX80 Codec ->Unified CM ->TX9000 -> CallForward Busy ->MX300G2

Verify whether callforward busy isworking for CiscoTelePresence TX9000registered in CiscoUnifiedCommunicationsManager to CiscoTelePresenceMX300G2 registeredin Cisco UnifiedCommunicationsManager

Call forwardbusy inTX9000 toMX300G2registered inUnified CM

UCJ10.6S.VCS.G.029

Passed500-32 -> UnifiedCM -> TX9000->Call Forward NoAnswer ->MX300G2

Verify whether callforward no answer isworking for CiscoTelePresence TX9000registered in CiscoUnifiedCommunicationsManager to CiscoTelePresenceMX300G2 registeredin Cisco UnifiedCommunicationsManager

Call forwardno answer inTX9000 toMX300G2registered inUnified CM

UCJ10.6S.VCS.G.030



Passed500-32 -> UnifiedCM cluster 2 ->TX9000EX90 -> UnifiedCM cluster 2 ->TX9000 -> CallForward busy ->Unified CM cluster2 -> SIP Trunk ->Unified CM cluster1 -> SX80 Codec

Verify whether thecall is forwarded toCisco TelePresenceSX80 Codecregistered in CiscoUnifiedCommunicationsManager cluster 1through SIP Trunkwhen CiscoTelePresence TX9000registered in CiscoUnifiedCommunicationsManager cluster 2 isbusy with other call

Call forwardbusy inTX9000 toSX80 Codecthrough SIPTrunk

UCJ10.6S.VCS.G.031

Passed500-32 -> UnifiedCM cluster 2->TX9000 -> CallForward NoAnswer -> UnifiedCM cluster 2 ->SIP Trunk ->Unified CM cluster1 -> SX80 Codec

Verify whether thecall is forwarded toCisco TelePresenceSX80 Codecregistered in CiscoUnifiedCommunicationsManager cluster 1through SIP Trunkwhen CiscoTelePresence TX9000registered in CiscoUnifiedCommunicationsManager cluster 2leaves the callunanswered

Call forwardno answer inTX9000 toSX80 Codecthrough SIPTrunk

UCJ10.6S.VCS.G.032

Passed500-32 -> UnifiedCM -> TX9000EX90 -> UnifiedCM -> TX9000 ->Call Forward Busy-> SX80 Codec

Verify whether callforward busy isworking for CiscoTelePresence TX9000registered in CiscoUnifiedCommunicationsManager to CiscoTelePresence SX80Codec registered inCisco UnifiedCommunicationsManager

Call forwardbusy inTX9000 toSX80 Codecregistered inUnified CM

UCJ10.6S.VCS.G.033



Passed500-32 -> UnifiedCM -> TX9000->Call Forward NoAnswer -> SX80Codec

Verify whether callforward no answer isworking for CiscoTelePresence TX9000registered in CiscoUnifiedCommunicationsManager to CiscoTelePresence SX80Codec registered inCisco UnifiedCommunicationsManager

Call forwardno answer inTX9000 toSX80 Codecregistered inUnified CM

UCJ10.6S.VCS.G.034

PassedNAVerify whether the'xStatus Video Output'command given inxAPI of the end pointCisco TelePresenceSystem IntegratorPackage C90 displaysthe information aboutthe display deviceconnected to it

GettingEDIDinformationabout thedisplaythrough'xStatusVideoOutput'commandgiven in xAPIof IntegratorPackage C90

UCJ10.6S.VCS.G.035

PassedIntegrator PackageC90 -> CiscoVCS-> EX90Integrator PackageC90 -> Add ->Cisco VCS ->Cisco TelePresenceMX300-G2

Verify whether theconference call can beestablished amongCisco TelePresenceSystem IntegratorPackage C90, CiscoTelePresenceMX300-G2 and CiscoTelePresence SystemEX90 all areregistered with CiscoTelePresence VideoCommunicationServer

VideoConferencingbetweenIntegratorPackage C90,MX300-G2and EX90registeredwith CiscoVCS

UCJ10.6S.VCS.G.036



PassedIntegrator PackageC90 -> UnifiedCM-> EX90Integrator PackageC90 -> Add ->Unified CM ->Cisco TelePresenceMX300-G2

Verify whether theconference call can beestablished amongCisco TelePresenceSystem IntegratorPackage C90, CiscoTelePresence SystemEX90 and CiscoTelePresenceMX300-G2 all areregistered with CiscoUnifiedCommunicationsManager

VideoConferencingbetweenIntegratorPackage C90,EX90 andMX300-G2registeredwith UnifiedCM

UCJ10.6S.VCS.G.037

PassedEX90 -> UnifiedCM -> IntegratorPackage C90 ->Hold/Transfer ->Unified CM -> SIPTrunk -> CiscoVCS ->MX300-G2

Verify whether theconsultative calltransfer from CiscoTelePresence SystemIntegrator PackageC90 registered withCisco UnifiedCommunicationsManager to CiscoTelePresenceMX300-G2 registeredwith CiscoTelePresence VideoCommunicationServer works successfully

ConsultativeCall TransferfromIntegratorPackage C90registeredwith UnifiedCM toMX300-G2registeredwith CiscoVCS

UCJ10.6S.VCS.G.038

PassedEX90 -> CiscoVCS -> IntegratorPackage C90 ->Hold/Transfer ->Cisco VCS -> SIPTrunk -> UnifiedCM -> CiscoTelePresenceMX300 -G2

Verify whether theconsultative calltransfer from CiscoTelePresence SystemIntegrator PackageC90 registered withCisco TelePresenceVideoCommunicationServer to CiscoTelePresenceMX300-G2 registeredwith Cisco UnifiedCommunicationsManager workssuccessfully

ConsultativeCall TransferfromIntegratorPackage C90registeredwith CiscoVCS toMX300-G2registeredwith UnifiedCM

UCJ10.6S.VCS.G.039



PassedIntegrator PackageC90 ->Unified CM-> CiscoTelePresenceMX300-G2 ->Presentationsharing

Verify whether thepresentation in CiscoTelePresence SystemIntegrator PackageC90 can be sharedwith CiscoTelePresenceMX300-G2 bothregistered withUnified CM

PresentationsharingbetweenIntegratorPackage C90andMX300-G2both areregisteredwith UnifiedCM

UCJ10.6S.VCS.G.040

PassedIntegrator PackageC90 -> Cisco VCS-> CiscoTelePresenceMX300-G2 ->PresentationSharing

Verify whether thepresentation in CiscoTelePresence SystemIntegrator PackageC90 can be sharedwith CiscoTelePresenceMX300-G2 bothregistered with CiscoTelePresence VideoCommunicationServer.

PresentationsharingbetweenIntegratorPackage C90andMX300-G2both areregisteredwith CiscoVCS

UCJ10.6S.VCS.G.041

PassedIntegrator PackageC90 ->Unified CM-> 500-32 ->Presentationsharing

Verify whether thepresentation in CiscoTelePresence SystemIntegrator PackageC90 can be sharedwith CiscoTelePresence System500-32 both registeredwith Cisco UnifiedCommunicationsManager

PresentationsharingbetweenIntegratorPackage C90and 500-32both areregisteredwith UnifiedCM

UCJ10.6S.VCS.G.042

PassedNAVerify whether the'xStatus Video Output'command given inxAPI of the end pointCisco TelePresenceSX20 Quick Setdisplays theinformation about thedisplay deviceconnected to it

GettingEDIDinformationabout thedisplaythroughxStatus VideoOutputcommandgiven in xAPIof SX20Quick Set.

UCJ10.6S.VCS.G.043



PassedSX20 Quick Set ->CiscoVCS->EX90SX20 Quick Set ->Add -> Cisco VCS-> MX300-G2

Verify whether theconference call can beestablished fromCisco TelePresenceSX20 Quick Set toCisco TelePresenceMX300-G2 bothregistered with CiscoTelePresence VideoCommunicationServer

VideoConferencingfrom SX20Quick Set toMX300-G2bothregisteredwith CiscoVCS

UCJ10.6S.VCS.G.044

PassedSX20 Quick Set ->CiscoVCS->EX90SX20 Quick Set ->Add -> Cisco VCS-> SIP Trunk ->Unified CM ->Cisco TelePresenceMX300-G2

Verify whether theconference call can beestablished fromCisco TelePresenceSX20 Quick Setregistered with CiscoTelePresence VideoCommunicationServer to CiscoTelePresenceMX300-G2 registeredwith Cisco UnifiedCommunicationsManager.

VideoConferencingfrom SX20Quick Setregisteredwith CiscoVCS toMX300-G2registeredwith UnifiedCM

UCJ10.6S.VCS.G.045

PassedSX10 Quick Set ->Unified CM ->Integrator PackageC90

Verify whether videocall from CiscoTelePresence SX10Quick Set to CiscoTelePresence SystemIntegrator PackageC90 both areregistered with CiscoUnifiedCommunicationsManager can beestablishedsuccessfully.

Making videocall fromSX10 QuickSet toIntegratorPackage C90both areregisteredwith UnifiedCM

UCJ10.6S.VCS.G.046



PassedSX10 Quick Set ->Unified CM ->Integrator PackageC90 -> Hold /Resume

Verify whetherHolding andResuming a video callfrom CiscoTelePresence SX10Quick Set to CiscoTelePresence SystemIntegrator PackageC90 both areregistered with CiscoUnifiedCommunicationsManager workssuccessfully.

Hold andResume avideo callfrom SX10Quick Set toIntegratorPackage C90both areregisteredwith UnifiedCM

UCJ10.6S.VCS.G.047

PassedSX10 Quick Set ->Unified CMcluster(1) -> SIPTrunk -> UnifiedCM cluster(2) ->500-32

Verify whether intercluster video call fromCisco TelePresenceSX10 Quick Setregistered with CiscoUnifiedCommunicationsManager cluster(1) toCisco TelePresenceSystem 500-32registered with CiscoUnifiedCommunicationsManager cluster(2)can be establishedsuccessfully.

Making intercluster videocall fromSX10 QuickSet registeredwith UnifiedCMcluster(1)to 500-32registeredwith UnifiedCMcluster(2)

UCJ10.6S.VCS.G.048

PassedSX10 Quick Set ->Unified CM ->SX20 Quick Set

Verify whether videocall from CiscoTelePresence SX10Quick Set to CiscoTelePresence SX20Quick Set both areregistered with CiscoUnifiedCommunicationsManager can beestablishedsuccessfully.

Making videocall fromSX10 QuickSet to SX20Quick Setboth areregisteredwith UnifiedCM

UCJ10.6S.VCS.G.049



PassedSX10 Quick Set ->Unified CM ->SX20 Quick Set ->Hold / Resume

Verify whetherHolding andResuming a video callfrom CiscoTelePresence SX10Quick Set to CiscoTelePresence SX20Quick Set both areregistered with CiscoUnifiedCommunicationsManager workssuccessfully.

Hold andResumevideocall fromSX10 QuickSet to SX20Quick Setboth areregisteredwith UnifiedCM

UCJ10.6S.VCS.G.050

PassedMX200-G2 ->Unified CM ->500-32

Verify whether videocall from CiscoTelePresenceMX200-G2 to CiscoTelePresence System500-32 both areregistered with CiscoUnifiedCommunicationsManager can beestablishedsuccessfully.

Making videocall fromMX200-G2to 500-32both areregisteredwith UnifiedCM

UCJ10.6S.VCS.G.051

PassedMX200-G2 ->Unified CM -> SIPTrunk -> CiscoVCS->MX300-G2

Verify whether videocall from CiscoTelePresenceMX200-G2 registeredwith Cisco UnifiedCommunicationsManager to CiscoTelePresenceMX300-G2 registeredwith CiscoTelePresence VideoCommunicationServer can beestablishedsuccessfully.

Making videocall fromMX200-G2registeredwith UnifiedCM toMX300-G2registeredwith CiscoVCS.

UCJ10.6S.VCS.G.052



PassedMX200-G2 ->Unified CM ->Integrator PackageC90

Verify whether videocall from CiscoTelePresenceMX200-G2 to CiscoTelePresence SystemIntegrator PackageC90 both areregistered with CiscoUnifiedCommunicationsManager can beestablishedsuccessfully.

Making videocall fromMX200-G2to IntegratorPackage C90both areregisteredwith UnifiedCM

UCJ10.6S.VCS.G.053

PassedMX200-G2 ->Unified CMcluster(1) -> SIPTrunk -> UnifiedCM cluster(2) ->500-32

Verify whether intercluster video call fromCisco TelePresenceMX200-G2 registeredwith Cisco UnifiedCommunicationsManager cluster(1) toCisco TelePresenceSystem 500-32registered with CiscoUnifiedCommunicationsManager cluster(2)can be establishedsuccessfully.

Making intercluster videocall fromMX200-G2registeredwith UnifiedCMcluster(1)to 500-32registeredwith UnifiedCMcluster(2)

UCJ10.6S.VCS.G.054

PassedMX200-G2 ->Unified CM ->SX20 Quick Set

Verify whether videocall from CiscoTelePresenceMX200-G2 to CiscoTelePresence SX20Quick Set both areregistered with CiscoUnifiedCommunicationsManager can beestablishedsuccessfully.

Making videocall fromMX200-G2to SX20Quick Setboth areregisteredwith UnifiedCM

UCJ10.6S.VCS.G.055



PassedMX200-G2 ->Unified CM ->SX20 Quick Set ->Hold / Resume

Verify whetherHolding andResuming a video callfrom CiscoTelePresenceMX200-G2 to CiscoTelePresence SX20Quick Set both areregistered with CiscoUnifiedCommunicationsManager workssuccessfully.

Hold andResumevideocall fromMX200-G2to SX20Quick Setboth areregisteredwith UnifiedCM

UCJ10.6S.VCS.G.056

PassedMX200-G2 ->Unified CM ->500-32MX200-G2 ->Add-> Unified CM ->SX20 Quick Set

Verify whether theconference call amongCisco TelePresenceMX200-G2, CiscoTelePresence System500-32 and CiscoTelePresence SX20Quick Set registeredwith Cisco UnifiedCommunicationsManager can beestablishedsuccessfully.

MakingConferencecall amongMX200-G2 ,500-32 andSX20 QuickSet all areregisteredwith UnifiedCM

UCJ10.6S.VCS.G.057

PassedMX200-G2 ->Unified CM ->500-32MX200-G2 -> Add-> Unified CM ->Integrator PackageC90

Verify whether theconference call amongCisco TelePresenceMX200-G2, CiscoTelePresence System500-32 and CiscoTelePresence SystemIntegrator PackageC90 registered withCisco UnifiedCommunicationsManager can beestablishedsuccessfully.

MakingConferencecall amongMX200-G2 ,500-32 andIntegratorPackage C90all areregisteredwith UnifiedCM

UCJ10.6S.VCS.G.058



Passed500-32 -> UnifiedCM -> MX300-G2

Verify whether videocall from CiscoTelePresence System500-32 to CiscoTelePresenceMX300-G2 both areregistered with CiscoUnifiedCommunicationsManager can beestablishedsuccessfully.

Making videocall from500-32 toMX300-G2both areregisteredwith UnifiedCM

UCJ10.6S.VCS.G.059

Passed500-32 -> UnifiedCM -> SIP Trunk-> Cisco VCS ->MX300-G2

Verify whether videocall from CiscoTelePresence System500-32 registeredwithCisco UnifiedCommunicationsManager to CiscoTelePresenceMX300-G2 registeredwith CiscoTelePresence VideoCommunicationServer can beestablished.

Making videocall from500-32registeredwith UnifiedCM toMX300-G2registeredwith CiscoVCS

UCJ10.6S.VCS.G.060

Passed500-32-> UnifiedCM-> EX90500-32-> Add->Unified CM ->MX300-G2

Verify whether theconference call can beestablished fromCisco TelePresenceSystem 500-32 toCisco TelePresenceMX300-G2 both areregistered with CiscoUnifiedCommunicationsManager

MultisiteConferencingbetween500-32, EX90andMX300-G2are registeredwith UnifiedCM

UCJ10.6S.VCS.G.061



Passed500-32-> UnifiedCM -> SIP Trunk-> Cisco VCS ->EX90500-32-> UnifiedCM -> Add -> SIPTrunk -> CiscoVCS ->MX300-G2

Verify whether theconference call can beestablished fromCisco TelePresenceSystem 500-32registered with CiscoUnifiedCommunicationsManager to CiscoTelePresenceMX300-G2 registeredwith CiscoTelePresence VideoCommunicationServer

Conferencingfrom 500-32registeredwith UnifiedCM toMX300-G2registeredwith CiscoVCS

UCJ10.6S.VCS.G.062

Passed500-32 -> UnifiedCM -> CiscoTelePresence SX80Codec

Verify whether thevideo call from CiscoTelePresence System500-32 can beestablished to CiscoTelePresence SX80Codec both areregistered with CiscoUnifiedCommunicationsManager

MakingVideo Callfrom 500-32to SX80Codec bothare registeredwith UnifiedCM

UCJ10.6S.VCS.G.063

Passed500-32 -> UnifiedCM - > SIP Trunk-> Cisco VCS ->Cisco TelePresenceSX80 Codec

Verify whether thevideo call from CiscoTelePresence System500-32 registeredwithCisco UnifiedCommunicationsManager can beestablished to CiscoTelePresence SX80Codec registered withCisco TelePresenceVideoCommunicationServer

MakingVideo Callfrom 500-32registeredwith UnifiedCM to SX80Codecregisteredwith CiscoVCS

UCJ10.6S.VCS.G.064



Passed500-32-> UnifiedCM-> EX90500-32-> Add->Unified CM ->SX80 Codec

Verify whether theconference call can beestablished fromCisco TelePresenceSystem 500-32 toCisco TelePresenceSX80 Codec both areregistered with CiscoUnifiedCommunicationsManager

Conferencingamong500-32,EX90and SX80Codecregisteredwith UnifiedCM

UCJ10.6S.VCS.G.065

Passed500-32 -> UnifiedCM Cluster(1) ->SIP Trunk ->Unified CMCluster(2) -> SX80Codec

Verify whether theinter-cluster call fromCisco TelePresenceSystem 500-32registered with CiscoUnifiedCommunicationsManager Cluster (1)to Cisco TelePresenceSX80 Codecregistered with CiscoUnifiedCommunicationsManager Cluster (2)can be established.

MakingInter-ClusterCall from500-32registeredwith UnifiedCM Cluster(1) to SX80Codecregisteredwith UnifiedCM Cluster(2).

UCJ10.6S.VCS.G.066

Passed500-32(PresentationSharing) -> UnifiedCM Cluster(1) ->SIP Trunk ->Unified CMCluster(2) -> SX80Codec

Verify whether thepresentation fromCisco TelePresenceSystem 500-32registered with CiscoUnifiedCommunicationsManager Cluster(1)can be shared withCisco TelePresenceSX80 Codecregistered with CiscoUnifiedCommunicationsManager Cluster(2)successfully.

Presentationsharing from500-32registeredwith UnifiedCMCluster(1) toSX80 Codecregisteredwith UnifiedCMCluster(2).

UCJ10.6S.VCS.G.067



Passed500-32(PresentationSharing) -> UnifiedCM Cluster(1) ->SIP Trunk ->Unified CMCluster(2) ->MX300-G2

Verify whether theinter-cluster call fromCisco TelePresenceSystem 500-32registered with CiscoUnifiedCommunicationsManager Cluster(1) toCisco TelePresenceMX300-G2 registeredwith Cisco UnifiedCommunicationsManager Cluster(2)can be established.

Presentationsharing from500-32registeredwith UnifiedCMCluster(1) toCiscoTelePresenceMX300-G2registeredwith UnifiedCMCluster(2).

UCJ10.6S.VCS.G.068

Passed500-32(PresentationSharing) -> UnifiedCM -> SIP Trunk-> Cisco VCS ->SX80 Codec

Verify whether thepresentation fromCisco TelePresenceSystem 500-32registered with CiscoUnifiedCommunicationsManager can beshared with CiscoTelePresence SX80Codec registered withCisco TelePresenceVideoCommunicationServer successfully.

Presentationsharing from500-32registeredwith UnifiedCM to SX80Codecregisteredwith CiscoVCS

UCJ10.6S.VCS.G.069

Passed500-32(PresentationSharing) -> UnifiedCM -> SIP Trunk->Cisco VCS ->MX300-G2

Verify whether thepresentation fromCisco TelePresenceSystem 500-32registered with CiscoUnifiedCommunicationsManager can beshared with CiscoTelePresenceMX300-G2 registeredwith CiscoTelePresence VideoCommunicationServer successfully.

Presentationsharing from500-32registeredwith UnifiedCM toMX300-G2registeredwith CiscoVCS

UCJ10.6S.VCS.G.070



PassedEX90 -> UnifiedCM -> 500-32 ->Call forward all - >Unified CM -> SIPTrunk -> CiscoVCS ->MX300-G2

Verify whether videocall to CiscoTelePresence System500-32 registeredwithCisco UnifiedCommunicationsManager can beforwarded to CiscoTelePresenceMX300-G2 registeredwith CiscoTelePresence VideoCommunicationServer.

Call ForwardAll in 500-32registeredwith UnifiedCM toMX300-G2registeredwith CiscoVCS

UCJ10.6S.VCS.G.071

Passed500-32 ->UnifiedCM -> MX300G2-> Hold/Resume

Verify whetherHold/Resume of avideo call betweenCisco TelePresenceSystem 500-32 andCisco TelePresenceMX300-G2 bothregistered in CiscoUnifiedCommunicationsManager workssuccessfully

Hold/Resumea video callbetween500-32 andMX300-G2

UCJ10.6S.VCS.G.072

Passed500-32 ->UnifiedCM ->SX80Codec-> Hold/Resume

Verify whetherHold/Resume of avideo call betweenSystem CiscoTelePresence System500-32 and CiscoTelePresence CiscoTelePresence SX80Codec both areregistered in CiscoUnifiedCommunicationsManager workssuccessfully

Hold/Resumea video callbetween500-32 and toSX80 Codec

UCJ10.6S.VCS.G.073

CSCur60996FailedNAVerify whether thechanges of languagein Cisco TelePresenceSX10 Quick Setworks successfully

Checking thelanguagechanges inSX10 QuickSet

UCJ10.6S.VCS.G.074



CSCur60216FailedNAVerify whether thenumber of languagespresent in Web GUI,Touch UI and remoteusage of CiscoTelePresence SX10Quick Set are equal

Comparingthe number oflanguagesPresent andsupported byWeb GUI,Touch UI andremote usageof SX10Quick Set

UCJ10.6S.VCS.G.075

CSCur60272FailedJabber Guest(Windows) ->CiscoExpressway-E ->Expressway-C ->Unified CM ->EX90

To verify that user isable to make a videocall fromCisco JabberGuest on Windows toEX90 and disablevideo mute

Make a videocall fromCisco JabberGuest onWindows toEX90 andDisable videomute

UCJ10.6S.VCS.G.076

CSCur59459FailedJabber Guest(Windows) ->CiscoExpressway-E ->Expressway-C ->Unified CM -> SIPTrunk -> Cisco TS7010

To Verify that user isable to make meet meconference fromCiscoJabber Guest onWindows to Cisco TS7010 and verify thecaller name isdisplaying correctly

Caller namein CiscoJabber Guestclient whilemaking Meetmeconferencevideo callfrom CiscoJabber Gueston Windowsto Cisco TS7010

UCJ10.6S.VCS.G.077

Cisco Jabber for iPhone and iPadDefectsStatusCall Component FlowDescriptionTitleLogical ID

PassedIP Phone -> UnifiedCM -> Jabber foriPhone

Verify whetherJabber foriPhone can ableto park theincoming callfrom IP Phonesuccessfully

Park theincoming callfrom IP Phonein Jabber foriPhone

UCJ10.6S.CJI.G.001


Test Results SummaryCisco Jabber for iPhone and iPad

PassedIP Phone A -> UnifiedCM -> IP Phone B ->Unified CM -> Jabberfor iPhone

Verify whetherJabber foriPhone can ableto park thetransferred callfrom IP Phonesuccessfully

Park thetransferred callfrom IP Phonein Jabber foriPhone

UCJ10.6S.CJI.G.004

PassedIP Phone A -> UnifiedCM -> IP Phone B ->Unified CM -> Jabberfor iPhone

Verify whetherCisco Jabber foriPhone can ableto park theforwardedincoming callfrom IP Phonesuccessfullywhen the callforward all isenabled

Park theforwarded callfrom IP Phonein Jabber foriPhone when thecall forward allis enabled

UCJ10.6S.CJI.G.013

PassedIP Phone A -> UnifiedCM1 -> SIP Trunk ->Unified CM2 -> Jabberfor iPhone

Verify whetherCisco Jabber foriPhone can ableto park theincoming callfrom IP Phoneafter hold andresume the callvia SIP Trunksuccessfully

Park theincoming callfrom IP Phonein Jabber foriPhone afterhold and resumethe call via SIPTrunk

UCJ10.6S.CJI.G.026

PassedJabber for iPhone1 ->Unified CM -> Jabberfor iPhone2

Verify whetherJabber foriPhone2 canable to park theincoming callfrom Jabber foriPhone1successfully

Park theincoming callfrom Jabber foriPhone in Jabberfor iPhone

UCJ10.6S.CJI.G.031


Verify whetheraudio statisticsshown in Jabberfor iPhone whenaudio call madebetween the IPPhone andJabber foriPhonesuccessfully

Check the audiostatistics inJabber foriPhone whileincoming callfrom IP Phone

UCJ10.6S.CJI.G.036




Verify whethervideo statisticsshown in theJabber foriPhone whenvideo call madebetween the IPPhone andJabber foriPhonesuccessfully

Check the videostatistics in theJabber foriPhone whileincoming callfrom IP Phone

UCJ10.6S.CJI.G.039

PassedCisco TelePresenceSystem EX90 ->Unified CM -> Jabberfor iPhone

Verify whethervideo statisticsshown in theJabber foriPhone whenvideo call madebetween theCiscoTelePresenceSystem EX90and Jabber foriPhonesuccessfully

Check the videostatistics in theJabber foriPhone whileincoming callfrom CiscoTelePresenceSystem EX90

UCJ10.6S.CJI.G.042

PassedNAVerify whetherInstantMessaging canbe sent fromJabber foriPhone1 toJabber foriPhone2successfully

Send InstantMessaging fromJabber foriPhone1 toJabber foriPhone2

UCJ10.6S.CJI.G.043

PassedIP Phone -> UnifiedCM1 -> SIP Trunk ->Unified CM2 -> Jabberfor iPhone

Verify whetheraudio statisticsshown in theJabber foriPhone whenaudio call madebetween the IPPhone andJabber foriPhone via SIPTrunksuccessfully

Check the audiostatistics in theJabber foriPhone whileincoming callfrom IP Phonevia SIP Trunk

UCJ10.6S.CJI.G.037




Verify whetheraudio statisticshas been shownin the Jabber foriPhone whileincoming callfrom IP Phoneafter done holdand resume inJabber foriPhonesuccessfully

Check the audiostatistics in theJabber foriPhone whileincoming callfrom IP Phoneafter hold andresume

UCJ10.6S.CJI.G.041

PassedIP Phone A -> UnifiedCM1 -> SIP Trunk ->Unified CM2 -> IPPhone B -> UnifiedCM2 -> Jabber foriPhone

Verify whetherCisco Jabber foriPhone can ableto park theforwardedincoming callfrom IP Phonevia SIP trunksuccessfullywhen the callforward noanswer isenabled

Park theforwarded callfrom IP Phonein Jabber foriPhone via SIPTrunk when thecall forward noanswer isenabled

UCJ10.6S.CJI.G.020

PassedIP Phone -> UnifiedCM -> Jabber for iPad

Verify whetherJabber for iPadcan able to parkthe incomingcall from IPPhonesuccessfully

Park theincoming callfrom IP Phonein Jabber foriPad

UCJ10.6S.CJIPad.G.001

PassedIP Phone A -> UnifiedCM -> IP Phone B ->Unified CM -> Jabberfor iPad

Verify whetherJabber for iPadcan able to parkthe transferredcall from IPPhonesuccessfully

Park thetransferred callfrom IP Phonein Jabber foriPad




PassedIP Phone A -> UnifiedCM -> IP Phone B ->Unified CM -> Jabberfor iPad

Verify whetherCisco Jabber foriPad can able topark theforwardedincoming callfrom IP Phonesuccessfullywhen the callforward all isenabled

Park theforwarded callfrom IP Phonein Jabber foriPad when thecall forward allis enabled


PassedIP Phone A -> UnifiedCM1 -> SIP Trunk ->Unified CM2 -> Jabberfor iPad

Verify whetherCisco Jabber foriPad can able topark theincoming callfrom IP Phoneafter hold andresume the callvia SIP Trunksuccessfully

Park theincoming callfrom IP Phonein Jabber foriPad after holdand resume thecall via SIPTrunk


PassedJabber for iPad1 ->Unified CM -> Jabberfor iPad2

Verify whetherJabber for iPad2 can able topark theincoming callfrom Jabber foriPad 1successfully

Park theincoming callfrom Jabber foriPad in Jabberfor iPad



Verify whetheraudio statisticsshown in theJabber for iPadwhen audio callmade betweenthe IP Phone andJabber for iPadsuccessfully

Check the audiostatistics in theJabber for iPadwhile incomingcall from IPPhone



Verify whethervideo statisticsshown in theJabber for iPadwhen video callmade betweenthe IP Phone andJabber for iPadsuccessfully

Check the videostatistics in theJabber for iPadwhile incomingcall from IPPhone




PassedCisco TelePresenceSystem EX90 ->Unified CM -> Jabberfor iPad

Verify whethervideo statisticsshown in theJabber for iPadwhen video callmade betweenthe CiscoTelePresenceSystem EX90and Jabber foriPadsuccessfully

Check the videostatistics in theJabber for iPadwhile incomingcall from CiscoTelePresenceSystem EX90


PassedNAVerify whetherInstantMessaging canbe sent fromJabber for iPad1to Jabber foriPad2successfully

Send InstantMessaging fromJabber for iPad1to Jabber foriPad2


PassedIP Phone -> UnifiedCM1 -> SIP Trunk ->Unified CM2 -> Jabberfor iPad

Verify whetheraudio statisticsshown in theJabber for iPadwhen audio callmade betweenthe IP Phone andJabber for iPadvia SIP Trunksuccessfully

Check the audiostatistics in theJabber for iPadwhile incomingcall from IPPhone via SIPTrunk


PassedIP Phone -> UnifiedCM1 -> Jabber for iPad

Verify whetheraudio statisticshas been shownin the Jabber foriPad whileincoming callfrom IP Phoneafter done holdand resume inJabber for iPadsuccessfully

Check the audiostatistics in theJabber for iPadwhile incomingcall from IPPhone after holdand resume




PassedIP Phone A -> UnifiedCM1 -> SIP Trunk ->Unified CM2 -> IPPhone B -> UnifiedCM2 -> Jabber for iPad

Verify whetherCisco Jabber foriPad can able topark theforwardedincoming callfrom IP Phonevia SIP trunksuccessfullywhen the callforward noanswer isenabled

Park theforwarded callfrom IP Phonein Jabber foriPad via SIPTrunk when thecall forward noanswer isenabled


Cisco Jabber for AndroidDefectsStatusCall Component

flowDescriptionTitleLogical ID

PassedIP Phone A ->Unified CM ->Jabber for Android

Verify whetherJabber for Androidcan able to park theincoming call fromIP Phonesuccessfully

Park theincoming callfrom IP Phonein Jabber forAndroid

UCJ10.6S.CJA.G.001

PassedIP Phone A ->Unified CM1 -> SIPTrunk -> UnifiedCM2 -> Jabber forAndroid

Verify whetherJabber for Androidcan able to park theincoming call fromIP Phone via SIPTrunk successfully

Park theincoming callfrom IP Phonein Jabber forAndroid via SIPTrunk

UCJ10.6S.CJA.G.002

PassedIP Phone A ->Unified CM -> IPPhone B -> UnifiedCM -> Jabber forAndroid

Verify whetherJabber for Androidcan able to park thetransferred call fromIP Phonesuccessfully

Park thetransferred callfrom IP Phonein Jabber forAndroid

UCJ10.6S.CJA.G.004

PassedIP Phone A ->Unified CM1 -> SIPTrunk -> UnifiedCM2 -> IP Phone B-> Unified CM2 ->Jabber for Android

Verify whetherJabber for Androidcan able to park theconsult transferredcall from IP Phonevia SIP Trunksuccessfully

Park thetransferred callfrom IP Phonein Jabber forAndroid via SIPTrunk

UCJ10.6S.CJA.G.008


Test Results SummaryCisco Jabber for Android

PassedIP Phone A ->Unified CM -> IPPhone B -> UnifiedCM -> IP Phone C-> Unified CM ->Jabber for Android

Verify whetherJabber for Androidcan able to park thechain transfer callfrom IP Phonesuccessfully

Park the chaintransferred callfrom IP Phonein Jabber forAndroid

UCJ10.6S.CJA.G.010


Verify whetherCisco Jabber forAndroid can able topark the incomingcall from IP Phoneafter hold andresume the callsuccessfully

Park theincoming callfrom IP Phonein Jabber forAndroid afterhold and resumethe call

UCJ10.6S.CJA.G.025


Verify whetheraudio statisticsshown in Jabber forAndroidwhen audiocall made betweenthe IP Phone andJabber for Androidsuccessfully

Check the audiostatistics in theJabber forAndroid whileincoming callfrom IP Phone

UCJ10.6S.CJA.G.036


Verify whethervideo statisticsshown in Jabber forAndroidwhen videocall made betweenIP Phone and Jabberfor Androidsuccessfully

Check the videostatistics inJabber forAndroid whileincoming callfrom IP Phone

UCJ10.6S.CJA.G.039

PassedNAVerify whetherimage file can besent from Jabber forAndroid1 to Jabberfor Android2 duringInstant Messagingsuccessfully

Send image filefrom Jabber forAndroid1 toJabber forAndroid2 duringInstantMessaging

UCJ10.6S.CJA.G.046

PassedNAVerify whethervideo file can besent from Jabber forAndroid1 to Jabberfor Android2 duringInstant Messagingsuccessfully

Send video filefrom Jabber forAndroid1 toJabber forAndroid2 duringInstantMessaging

UCJ10.6S.CJA.G.049



PassedIP Phone A ->Unified CM -> IPPhone B -> UnifiedCM -> Jabber forAndroid

Verify whetherCisco Jabber forAndroid can able topark the forwardedincoming call fromIP Phonesuccessfully whenthe call forward allis enabled

Park theforwarded callfrom IP Phonein Jabber forAndroid whencall forward allis enabled

UCJ10.6S.CJA.G.013

PassedIP Phone A ->Unified CM1 -> SIPTrunk -> UnifiedCM2 -> IP Phone B-> Unified CM2 ->Jabber for Android

Verify whetherCisco Jabber forAndroid can able topark the forwardedincoming call fromIP Phone via SIPTrunk successfullywhen the callforward all isenabled

Park theforwarded callfrom IP Phonein Jabber forAndroid via SIPTrunk when thecall forward allis enabled

UCJ10.6S.CJA.G.014

PassedIP Phone B ->Unified CM -> IPPhone C -> UnifiedCM -> IP Phone A->Unified CM -> IPPhone B -> UnifiedCM -> Jabber forAndroid

Verify whetherCisco Jabber forAndroid can able topark the forwardedincoming call fromIP Phonesuccessfully whenthe call forwardbusy is enabled

Park theforwarded callfrom IP Phonein Jabber forAndroid whencall forwardbusy is enabled

UCJ10.6S.CJA.G.016

PassedJabber for Android-> Unified CM ->Jabber for iPhone

Verify whetherJabber for iPhonecan able to park theincoming call fromJabber for Androidsuccessfully

Park theincoming callfrom Jabber forAndroid inJabber foriPhone

UCJ10.6S.CJA.G.028

PassedIP Phone -> UnifiedCM1 -> SIP Trunk-> Unified CM2 ->Jabber for Android

Verify whetheraudio statisticsshown in the Jabberfor Android whenaudio call madebetween the IPPhone and Jabberfor Android via SIPTrunk successfully

Check the audiostatistics in theJabber forAndroid whileincoming callfrom IP Phonevia SIP Trunk

UCJ10.6S.CJA.G.037



PassedNAVerify whetherInstant Messagingcan be sent fromJabber for Android1to Jabber forAndroid2successfully

Send InstantMessaging fromJabber forAndroid1 toJabber forAndroid2

UCJ10.6S.CJA.G.043

Cisco Jabber for WindowsDefectsStatusCall Component


PassedCJW A -> UnifiedCM 1 -> SIP trunk-> Unified CM 2 ->CJW B

Verify that CiscoJabber for WindowsB attends theincoming call fromCisco Jabber forWindows A via SIPTrunk and CJW Achecks the callstatistics details

Make call fromCJW A to CJWB via SIP Trunkand validate thecall statistics

UCJ10.6S.CJW.G.006

PassedCJW A -> UnifiedCM -> CJW B

Verify that specifiedring tone is heardsuccessfully whilereceiving incomingcall in Cisco Jabberfor Windows B

Validatepersonal ringtone in CJW

UCJ10.6S.CJW.G.011

PassedCJW A -> UnifiedCM1 -> H.323 ->CUBE -> H.323 ->Unified CM2 ->CJW B

Verify that specifiedring tone is heardsuccessfully in CJWB while receivingincoming call fromCisco Jabber forWindows A viaCUBE throughH.323to H.323inter-working

Make call fromCJW A to CJWBvia CUBE andcheck specifiedring tone

UCJ10.6S.CJW.G.014

PassedNAVerify that CiscoJabber for WindowsA initiates IM chatwith Cisco Jabber forWindows B and chatshas been savedsuccessfully

Auto save IM byCisco Jabber forWindows

UCJ10.6S.CJW.G.035


Test Results SummaryCisco Jabber for Windows

PassedNAVerify that CiscoJabber for WindowsA initiates IM chatwith Cisco Jabber forWindows B andcheck whether printIM option is available

Validate printIM option inCisco Jabber forWindows

UCJ10.6S.CJW.G.036

PassedNAVerify that in CiscoJabber for WindowsIM spell check workssuccessfully inWindows 8 ENplatform

Spell check inCisco Jabber forWindows usingWindows 8 ENplatform

UCJ10.6S.CJW.G.001

PassedNAVerify that "Alertwhen available" popup notificationappears when the userbecomes "available"from "away" state

Enable "Alertwhen available"for an user inJabber forWindows

UCJ10.6S.CJW.G.051

PassedNAVerify that duringchat with multipleusers, drag and dropof conversation tab inchat window isworking successfully

ConversationTab reorderingin Jabber forWindows

UCJ10.6S.CJW.G.052

PassedNAVerify that user canable to send protectedchat messages in chatwindow usingsecurity labelsuccessfully

Protected chatmessages inJabber forWindows

UCJ10.6S.CJW.G.054

Cisco Jabber for MacDefectsStatusCall Component flowDescriptionTitleLogical ID

PassedCJM1 -> Unified CM1-> CJM2 -> UnifiedCM1 -> SIP Trunk ->Unified CM2 -> CJW1

Verify Call isForwarded fromCJM2 to CJW1via SIP trunkwhile makingcall from CJM1to CJM2

Inter-clusterCall Forward inCisco Jabber forMac

UCJ10.6S.CJM.G.121


Test Results SummaryCisco Jabber for Mac

PassedCJM1 -> Unified CM1-> CJM2 -> UnifiedCM1 -> CJA

Verify Call isTransferredfrom CJM toCJA whilemaking Callfrom CJM1 toCJM2

Transfer Callfrom Jabber forMac to Jabberfor Android

UCJ10.6S.CJM.G.122

PassedCJM1 -> Unified CM1-> CJM2 -> UnifiedCM1 -> ICT Trunk ->Unified CM2 -> PhoneC (9971)

Verify Call isTransferredfrom CJM to IPPhone 9971 viaICTTrunkwhilemaking callfrom CJM1 toCJM2

Transfer Callfrom Jabber forMac to IP Phone9971 via ICTTrunk

UCJ10.6S.CJM.G.123

PassedNAVerify Groupchats are sentfrom Jabber forMac to 2 ormore users

Send GroupChats tomultiple users inJabber for Mac

UCJ10.6S.CJM.G.124

PassedNAVerify whethertheMac user canshare desktopwith CJW usersuccessfully

SharingDesktopfrom Mac userto CJW user

UCJ10.6S.CJM.G.125

PassedCJM1 -> Unified CM1-> CJM2

Verify whetherthe call isestablishedsuccessfullyfrom CJM1 toCJM2 whilemaking callfrom CJM1 toCJM2 by dialingURI of theCJM2 user

Intra-clusterURI Dialing inJabber for Mac

UCJ10.6S.CJM.G.126

PassedNAVerify WebExmeeting isestablishedbetween CJMand CJW whilesending WebExMeeting requestfrom CJM toCJW

Start WebExMeeting fromCisco Jabber forMac to CiscoJabber forWindows

UCJ10.6S.CJM.G.127



PassedCJM ->Unified CM1 ->CUBE -> Unified CM2-> Phone A (6941)

Verify Chats aresent successfullyfrom CJM toCJA while callis in progressbetween CJMand IP Phone viaCUBE

SendChats fromCJM to CJAwhile call is inprogressbetween CJMand IP Phonevia CUBE

UCJ10.6S.CJM.G.128

PassedNAVerify files (txt,pdf, images,docs) aretransferred fromCJM1 user toCJM2 usersuccessfully

File Transfer inCisco Jabber forMac

UCJ10.6S.CJM.G.129

PassedNAVerify audiofiles aretransferred fromJabber for Macto Jabber forWindowssuccessfully

Audio filetransfer inJabber for Mac

UCJ10.6S.CJM.G.130

PassedCJM ->Unified CM1 ->CJW

Verify files aretransferred fromCJM to CJWwhile call is inprogressbetween Jabberfor Mac andJabber forWindows

Send files fromCisco Jabber forMac when callis in progresswith CiscoJabber forWindows

UCJ10.6S.CJM.G.131

PassedNAVerify chatsshould not sentfrom Jabber forMac to Jabberfor Android userwhen Jabber forAndroid user isin blocked state

Send Chats forblocked usersfrom Jabber forMac to Jabberfor Android

UCJ10.6S.CJM.G.132



PassedCJM ->Unified CM1 ->CJI

Verify whetherthe call isestablishedsuccessfullybetween CJMand Jabber foriPhone whenJabber foriPhone isblocked in CJM

Make call toblocked usersfrom Jabber forMac

UCJ10.6S.CJM.G.133

PassedCJM ->Unified CM1 ->CUBE -> Unified CM2-> Phone A (9951)

Verify Screencaptures are sentfrom CJM toCJW when callis in progressbetween CJMand IP Phone viaCUBE

Send ScreenCaptures whencall is inprogressbetween CJMand IP Phonevia CUBE

UCJ10.6S.CJM.G.134

PassedCJM ->Unified CM1 ->PSTN -> Unified CM2-> Phone A (DX650)

Verify call isestablished fromJabber for MACto DX650 viaPSTNsuccessfully

Make call fromCJM to DX650via PSTN

UCJ10.6S.CJM.G.135

PassedNAVerify states arechanged bychanging thecustom states inJabber for Mac

Custom state inCisco Jabber forMac

UCJ10.6S.CJM.G.136

PassedNAVerifyemoticons aresent from Jabberfor Mac toJabber forAndroid whilechatting

Send chats withemoticons inJabber for Mac

UCJ10.6S.CJM.G.137

Cisco Unified Survivable Remote Site TelephonyDefectsStatusCall Component



Test Results SummaryCisco Unified Survivable Remote Site Telephony

PassedPhone A (99xx) ->Unified SRST ->Phone B

Verify that speed dial in99xx IP phone isassigned successfullyand Cisco Unified IPphone 99xx makes callto IP phone B usingspeed dial button

Assign speeddial for 99xx IPphone andinitiate callusing speed dial

UCJ10.6S.SRST.G.201

PassedPhone A ->UnifiedSRST -> Phone B(99xx) -> Phone C

Verify that call forwardis set in 99xx DNconfiguration page andIP phone A initiates callto 99xx and checkwhether call getsforwarded to IP phone Csuccessfully during failover

Set Call forwardin Phone DNpage of 99xx inUnified CM andprovision it infallback

UCJ10.6S.SRST.G.205

PassedPhone A ->UnifiedSRST -> Phone B(69xx) -> Phone C

Verify that call forwardis set successfully in69xx SIP phone DNpage and afterprovisioning and duringfallback check whethercall forward isconfigured successfullyand validate call getsforwarded to IP phone Csuccessfully when callinitiated from IP phoneA to 69xx IP phone

Assign callforward in 69xxSIP phone DNpage andvalidate duringfail over

UCJ10.6S.SRST.G.207

PassedPhone A (99xx) ->Unified SRST ->Phone B

Verify that Line TextLabel configured in 99xxIP phone is successfuland during fallbackcheck in 99xx IP phoneLine Text Label isdisplayed correctly

Display of LineText Label in99xx IP phone

UCJ10.6S.SRST.G.208

PassedPhone A (99xx) ->Unified SRST ->Phone B (69xx)

Verify that music onhold is heardsuccessfully in 69xx IPphone when IP phone Awhich is in active callwith 69xx IP phone goesto hold state

MOH in 69xxIP phone

UCJ10.6S.SRST.G.210

PassedPhone A ->UnifiedSRST -> Phone B(8945)

Verify that caller IDgiven in IP phone A isdisplayed in 89xx IPphone successfully

Validate callerID in 89xx IPphone

UCJ10.6S.SRST.G.232


Test Results SummaryCisco Unified Survivable Remote Site Telephony

Cisco Unity ConnectionDefectsStatusCall Component flowDescriptionTitleLogical ID

PassedIP Phone -> UnifiedCM -> UnityConnection -> MediaSense

Verify whetherthe user is ableto record avideo greetingsthrough TUIcall

Record VideoGreetingsthrough TUIafter enabledVideo Accountsin CUC

UCJ10.6S.CUC.G.001

PassedIP Phone A -> UnifiedCM -> UnityConnection -> MediaSense -> Unified CM-> IP Phone B

Verify whetherthe user is ableto see videogreetings whencall forward allis enabled tovoicemail

Verify VideoGreetings inUnified IPPhones whenCall forward allis enabled

UCJ10.6S.CUC.G.002

PassedIP Phone A ->UnifiedCM -> UnityConnection -> MediaSense -> Unified CM-> Jabber for Android

Verify whetherthe user is ableto see videogreetings inJabber forAndroid whencall forward allis enabled tovoicemail

Verify VideoGreetings inJabber forAndroid whenCall forward Allis enabled

UCJ10.6S.CUC.G.003

PassedIP Phone A -> UnifiedCM -> UnityConnection -> MediaSense

Verify whetherthe user is ableto record andplayback videogreetingsthrough TUIcall using99XXendpoints

Record andplayback theVideoGreetingsthrough TUIusing 9971 IPPhone

UCJ10.6S.CUC.G.004

Passed500-32 -> Unified CM-> Unity Connection ->Media Sense

Verify whetherthe user is ableto record andplayback videogreetingsthrough TUIcall usingTX9000endpoints

Record andplayback theVideoGreetingsthrough TUIusing CTS500-32

UCJ10.6S.CUC.G.005


Test Results SummaryCisco Unity Connection

Cisco Virtualization Experience Media Engine for WindowsDefectsStatusCall Component


PassedCJW1 -> UnifiedCM -> CJW2

Verify whether audiocall made betweenCJW1 and CJW2 issuccessful when CiscoJabber for Windows isin VirtualizedEnvironment

Make an audiocall fromCJW1 toCJW2when inVirtualizedEnvironment

UCJ10.6S.VXME.G.001

PassedIP Phone A ->Unified CM ->CJW1

Verify whether anintra-cluster audio callmade between IP PhoneA and CJW1 issuccessful when CiscoJabber for Windows isin VirtualizedEnvironment

Make anintra-clusteraudio call fromIP Phone toCJW1 when inVirtualizedEnvironment

UCJ10.6S.VXME.G.002

PassedIP Phone A (99xx)-> Unified CM ->CJW1

Verify whether anintra-cluster video callmade between IP PhoneA (99xx) and CJW1 issuccessful when CiscoJabber for Windows isin VirtualizedEnvironment

Make anintra-clustervideo call fromIP Phone(99xx) toCJW1 whenCisco JabberforWindows isin VirtualizedEnvironment

UCJ10.6S.VXME.G.008

PassedIP Phone A (99xx)-> Unified CM1 ->SIP Trunk ->Unified CM2 ->CJW1

Verify whether aninter-cluster video callmade between IP PhoneA (99xx) and CJW1 viaSIP Trunk is successfulwhen Cisco Jabber forWindows is inVirtualizedEnvironment

Make aninter-clustervideo call fromIP Phone(99xx) toCJW1 via SIPTrunk when inVirtualizedEnvironment

UCJ10.6S.VXME.G.009

PassedIP Phone A ->Unified CM1 ->PSTN Trunk ->Unified CM2 -> IPPhone B -> UnifiedCM2 -> CJW1

Verify whether aninter-cluster calltransfer to CJW1 issuccessful when callmade from IP Phone Ato IP Phone B via PSTNTrunk

Transfer aninter-clustercall from IPPhone toCJW1when callmadefrom an IPPhone viaPSTN Trunk

UCJ10.6S.VXME.G.016


Test Results SummaryCisco Virtualization Experience Media Engine for Windows

PassedIP Phone A (99xx)-> Unified CM1 ->SIP Trunk ->Unified CM2 -> IPPhone B (99xx) ->Unified CM2 ->CJW1

Verify whether aninter-cluster video calltransfer to CJW1 whencall made from IPPhone A (99xx) to IPPhone B (99xx) via SIPTrunk is successful

Transfer aninter-clustervideo call fromIP Phone(99xx) toCJW1 whencall made froman IP Phone A(99xx) via SIPTrunk

UCJ10.6S.VXME.G.024

PassedIP Phone A ->Unified CM ->CJW1

Verify whether anintra-cluster call holdand resume in CJW1 issuccessful when callmade from IP Phone toCJW1 when inVirtualizedEnvironment

Call Hold andResume inCJW1 whencall made fromIP Phone toCJW1 when inVirtualizedEnvironment

UCJ10.6S.VXME.G.034

PassedIP Phone A ->Unified CM ->CJW1 -> UnifiedCM -> IP Phone B

Verify whether theintra-cluster callconference between IPPhone A, IP Phone Band CJW1 is successfulwhen Cisco Jabber forWindows is inVirtualizedEnvironment

Intra-clustercall conferencebetween IPPhone A, IPPhone B andCJW1 when inVirtualizedEnvironment

UCJ10.6S.VXME.G.039

PassedIP Phone A ->Unified CM1 -> SIPTrunk -> UnifiedCM2 -> CJW1 ->Unified CM2 -> IPPhone B

Verify whether theinter-cluster callconference between IPPhone A, IP Phone Band CJW1 is successfulwhen in VirtualizedEnvironment

Inter-clustercall conferencebetween IPPhone A, IPPhone B andCJW1 via SIPTrunk when inVirtualizedEnvironment

UCJ10.6S.VXME.G.040

PassedIP Phone A ->Unified CM -> IPPhone B -> UnifiedCM -> CJW1

Verify whether theCJW in VirtualizedEnvironment is able toretrieve the parked callsuccessfully

Retrieve theparked callfrom CJW1when callmadebetween IPPhones

UCJ10.6S.VXME.G.044


Test Results SummaryCisco Virtualization Experience Media Engine for Windows


Verify whether the CallForward All for CJW1is successful whenCisco Jabber forWindows is inVirtualizedEnvironment

Enable CallForward Allfor CJW1 inUnified CMwhen in VDIenvironment

UCJ10.6S.VXME.G.061

PassedIP Phone A ->Unified CM1 ->CJW -> UnifiedCM1 -> SIP Trunk-> Unified CM2 ->IP Phone B

Verify whether the CallForward All is enabledin Unified CM forCJW1 to IP Phone atthe other cluster via SIPtrunk successfully

Enable CallForward Allfor CJW1 to IPPhone at theother clustervia SIP trunkin Unified CM

UCJ10.6S.VXME.G.062


Verify whether the CallForwardNoAnswer forCJW1 is successfulwhen Cisco Jabber forWindows is inVirtualizedEnvironment

Enable CallForward NoAnswer forCJW1 inUnified CM

UCJ10.6S.VXME.G.066

PassedIP Phone A ->Unified CM1 ->CJW1 -> UnifiedCM1 -> IP Phone B-> Unified CM1 ->CJW1 -> UnifiedCM1 -> SIP Trunk-> Unified CM2 ->IP Phone C

Verify whether the CallForward Busy forCJW1 to IP Phone atthe other cluster via SIPtrunk is successfulwhen Cisco Jabber forWindows is inVirtualizedEnvironment

Enable CallForward Busyfor CJW1 inUnified CM toIP Phone at theother clustervia SIP Trunk

UCJ10.6S.VXME.G.072

PassedNAVerify whether one ofthe UC accessories -mouse is supported andJabber is logged andnavigated using mousewhen Jabber is inVirtualizedEnvironment

Support for oneof theaccessories -Mouse to loginJabber andnavigate to alltabs in Jabberwhen Jabber inVirtualizedEnvironment

UCJ10.6S.VXME.G.121

Cisco TelePresence Multipoint Control UnitDefectsStatusCall Component



Test Results SummaryCisco TelePresence Multipoint Control Unit

PassedMCU 4510 ->CiscoVCS ->CiscoTelePresenceMX300-G2

Verify whetherCisco TelePresenceMX300-G2registered in CiscoTelePresence VideoCommunicationServer can be addedto a conferenceusing SIP registrar inCisco TelePresenceMCU 4510

Adding CiscoTelePresenceMX300-G2registered inCisco VCS tothe conferenceusing SIPRegistrar

UCJ10.6S.MCU.G.001

PassedMCU 4510 ->Cisco VCS-> SX80Codec

Verify whetherCisco TelePresenceSX80 Codecregistered in CiscoTelePresence VideoCommunicationServer can be addedto a conferenceusing SIP registrar inCisco TelePresenceMCU 4510

Adding CiscoTelePresenceSX80 Codecregistered inCisco VCS tothe conferenceusing SIPRegistrar

UCJ10.6S.MCU.G.002

PassedSX20QuickSet->CiscoVCS -> IntegratorPackage C90SX20QuickSet->AddParticipant->CiscoVCS ->CiscoTelepresenceMX300-G2->CiscoVCS -> MCU5310-> hold/resume

Verify whetherCisco TelePresenceSX20 Quick Set ,Cisco TelePresenceSystem IntegratorPackage C90 andCisco TelePresenceMX300-G2registered in CiscoTelePresence VideoCommunicationServer can join theMultiwayconference call byCisco TelePresenceMCU 5310 and holdand resume theconference call inMX300-G2

Hold andresume theMultiwayconference callusing MCU5310 inMX300-G2

UCJ10.6S.MCU.G.003



PassedSX20QuickSet->CiscoVCS ->IntegratorPackage C90SX20 QuickSet->Add Participant->Cisco VCS->CiscoTelepresence SX80Codec -> CiscoVCS -> MCU5310-> hold/resume

Verify whetherCisco TelePresenceSX20 Quick Set ,Cisco TelePresenceSystem IntegratorPackage C90 andCisco TelePresenceSX80 Codecregistered in CiscoTelePresence VideoCommunicationServer can join theconference call byCisco TelePresenceMCU 5310 and holdand resume theconference call inSX80 Codec

Hold andresume theMultiwayconference callusing MCU5310 in CiscoTelePresenceSX80 Codec

UCJ10.6S.MCU.G.004

PassedSX20 QuickSet ->CiscoVCS->IntegratorPackage C90SX20 QuickSet ->Add participant ->Cisco VCS->CiscoTelepresenceMX300-G2 SX20QuickSet -> AddParticipant -> CiscoVCS-> EX90 ->CiscoVCS ->MCU5310

Verify whetherCisco TelePresenceSX20 Quick Set ,Cisco TelePresenceMX300-G2, CiscoTelePresenceSystem IntegratorPackage C90 andCisco TelePresenceSystem EX90registered in CiscoTelePresence VideoCommunicationServer can join theconference call byCisco TelePresenceMCU 5310 and stayin the conference for1hour

Long durationMultiwayconference callin MX300-G2using MCU5310 registeredwith Cisco VCS

UCJ10.6S.MCU.G.005



PassedSX20 QuickSet->CiscoVCS->IntegratorPackage C90SX20QuickSet->AddParticipant-> CiscoVCS->CiscoTelepresence SX80Codec and EX90 ->CiscoVCS ->MCU5310

Verify whetherCisco TelePresenceSX20 Quick Set ,Cisco TelePresenceSX80 Codec, CiscoTelePresenceSystem IntegratorPackage C90 andCisco TelePresenceSystem EX90registered in CiscoTelePresence VideoCommunicationServer can join theconference call byCisco TelePresenceMCU 5310 and stayin the conference for1hour

Long durationMultiwayconference callin SX80 Codecusing MCU5310

UCJ10.6S.MCU.G.006

PassedSX20 QuickSet ->Cisco VCS ->EX90SX20 Quick Set ->Add Participant ->CiscoVCS ->CiscoTelepresenceMX300-G2 ->CiscoVCS ->MCU5310 CiscoTelepresenceMX300-G2 ->PresentationSharing

Verify whetherCisco TelePresenceSX20 Quick Set ,Cisco TelePresenceMX300-G2 andCisco TelePresenceSystem EX90registered in CiscoTelePresence VideoCommunicationServer can join theconference call byCisco TelePresenceMCU 5310 andshare thepresentation fromCisco TelePresenceMX300-G2

Presentationsharing fromCiscoTelePresenceMX300-G2 inMultiwayconference callusingMCU5310

UCJ10.6S.MCU.G.007



PassedSX20 QuickSet->Cisco VCS ->EX90SX20 Quick Set->Add Participant-> Cisco VCS->Cisco TelepresenceSX80 Codec ->CiscoVCS ->MCU5310 ->PresentationSharing

Verify whetherCisco TelePresenceSX20 Quick Set ,Cisco TelePresenceSX80 Codec andCisco TelePresenceSystem EX90registered in CiscoTelePresence VideoCommunicationServer can join theconference call byCisco TelePresenceMCU 5310 andshare thepresentation fromCisco TelePresenceSX80 Codec

Presentationsharing fromCiscoTelePresenceSX80 Codec inMultiwayconference callusingMCU5310

UCJ10.6S.MCU.G.008

PassedIntegrator PackageC90 -> Unified CM-> EX90Integrator PackageC90 -> AddParticipant-> MCU5310 -> SIP Trunk-> Unified CM ->CiscoVCS ->CiscoVCSExpressway ->SX20 QuickSet

Verify whether theconference call fromCisco TelePresenceSystem IntegratorPackage C90registered in CiscoUnifiedCommunicationsManager to SX20QuickSet registeredwith Unified CMviaCollaborationEDGEusing MCU 5310works successfully

Conference callto SX20QuickSetregistered withUnified CM viaCollaborationEDGE fromIntegratorPackage C90registered withUnified CM .

UCJ10.6S.MCU.G.009



PassedSX20 QuickSet,EX90 &MX300-G2 ->CiscoVCS ->MCU5310 ->PresentationSharing

Verify whetherCisco TelePresenceSX20 Quick Set ,Cisco TelePresenceMX300-G2 andCisco TelePresenceSystem EX90registered in CiscoTelePresence VideoCommunicationServer can join theMeetMe conferencecall by CiscoTelePresence MCU5310 and share thepresentation fromCisco TelePresenceMX300-G2

Presentationsharing fromCiscoTelePresenceMX300-G2 inMeet MeconferenceusingMCU5310

UCJ10.6S.MCU.G.010

Cisco TelePresence Management SuiteDefectsStatusCall Component


PassedNAVerify whether the AddSystem is renamed toAdd by Address in theAdd Systems page inCisco TelePresenceManagement Suite

Changes to AddSystems page

UCJ10.6S.TMS.G.001

PassedNAVerify whether the FromList is renamed to Addfrom Unified CM orTMS in CiscoTelePresenceManagement Suite

Changes toFrom List page

UCJ10.6S.TMS.G.002

PassedNAVerify whether the listconferences section hasbeen split into Searchand Advanced in CiscoTelePresenceManagement Suite

Change underListConferences inCisco TMS

UCJ10.6S.TMS.G.003


Test Results SummaryCisco TelePresence Management Suite

PassedNAVerify whether thesearch only phone booksources are removedfrom participants listsunder conferences inCisco TelePresenceManagement Suite

Search onlyphone booksourcesremoved fromscheduling

UCJ10.6S.TMS.G.004

PassedNAVerify whether the longconference title morethan 100 characters aresupported under ListConferences in CiscoTelePresenceManagement Suite

LongConference titlein Cisco TMS

UCJ10.6S.TMS.G.005

PassedNAVerify whether theediting of dial string forparticipants is disabledin Cisco TelePresenceManagement Suite newconference page

Change to dialstring ofparticipants

UCJ10.6S.TMS.G.006

PassedCisco TMS -> MCU5310 -> Cisco VCS-> EX90, EX60,SX80 Codec

Verify whether theReconnect messagedisplays on the masterendpoint registered inCisco TelePresenceVideo CommunicationServer when ShowReconnectMessage Boxon Endpoints is set toNo in CiscoTelePresenceManagement Suite

Reconnectmessage onMaster endpointregistered inCisco VCS

UCJ10.6S.TMS.G.007

PassedNAVerify whether the Usertime zones appearsunder list conferences inCisco TelePresenceManagement Suite

User time zonesin ListConferences

UCJ10.6S.TMS.G.008

PassedNAVerify whether the Usertime zones appearsunder Edit PersonalInformation in CiscoTelePresenceManagement Suite

User time zonesunder EditPersonalInformation

UCJ10.6S.TMS.G.009



PassedNAVerify whether the Usertime zones appearsunder Participant ListTab and ParticipantAvailability Table inCisco TelePresenceManagement Suite

User time zonesunderParticipant Listand ParticipantAvailabilitytable

UCJ10.6S.TMS.G.010

PassedNAVerify whether the valuecan be set for theallocation attempts fieldin Cisco TelePresenceManagement Suite

Change inAllocationAttempts Field

UCJ10.6S.TMS.G.011

PassedCisco TMS -> Adhoc Booking ->Unified CM ->EX90Cisco TMS -> MCU4510 -> SIP Trunk-> Unified CM ->EX90

Verify whether the adhoc call in CiscoTelePresence SystemEX90 registered in CiscoUnifiedCommunicationsManager is notdisconnected when a NoConnect Conference isabout to start in CiscoTelePresenceManagement Suite

No Ad hoc calldisconnectionfor endpointsregistered inUnified CM

UCJ10.6S.TMS.G.012

PassedCisco TMS -> Adhoc Booking ->Cisco VCS -> EX90Cisco TMS -> MCU4510 -> Cisco VCS-> EX90

Verify whether the adhoc call in CiscoTelePresence SystemEX90 registered in CiscoTelePresence VideoCommunication Serveris not disconnectedwhen a No ConnectConference is about tostart in CiscoTelePresenceManagement Suite

No Ad hoc calldisconnectionfor endpointsregistered inCisco VCS

UCJ10.6S.TMS.G.013

PassedNAVerify whether thewarning appears whenthe site administrator isset as default group inCisco TelePresenceManagement Suite

Warning whenSiteAdministrator isset as defaultgroup

UCJ10.6S.TMS.G.014



PassedNAVerify whether theconference title appearsunder the descriptioncolumn in the ActivityStatus page in CiscoTelePresenceManagement Suite

ConferenceTitle underDescriptionColumn

UCJ10.6S.TMS.G.015

PassedNAVerify whether Audiocall-in button underSmart Scheduler can bedisabled in CiscoTelePresenceManagement SuiteProvisioning Extension

Disable AudioCall-In buttonin SmartScheduler

UCJ10.6S.TMS.G.016

PassedNAVerify whether Videocall-in button underSmart Scheduler can bedisabled in CiscoTelePresenceManagement SuiteProvisioning Extension

Disable VideoCall-In buttonin SmartScheduler

UCJ10.6S.TMS.G.017

PassedNAVerify whether ports ona bridge can be reservedfor Cascading in CiscoTelePresenceManagement SuiteProvisioning Extension

Reserve Portson a bridge forCascading

UCJ10.6S.TMS.G.018

PassedNAVerify whether all theoption keys present inCisco TelePresenceSystem EX90 is presentand shown in CiscoTelePresenceManagement Suite

Option keysupport forEX90 in CiscoTMS

UCJ10.6S.TMS.G.019

Cisco TelePresence ConductorDefectsStatusCall Component



Test Results SummaryCisco TelePresence Conductor

PassedNAVerify whetherCisco TelePresenceConductor raises analarm when theCisco TelePresenceServer on VM hasno encryptionfeature key installed

Alarm raisedwhen noEncryptionfeature keyenabled inTelePresenceServer on VM

UCJ10.6S.TC.G.001

PassedNAVerify whetherCisco TelePresenceConductor raises analarm when theCisco TelePresenceServer 7010 has noencryption featurekey installed

Alarm raisedwhen noEncryptionfeature keyenabled inTelePresenceServer 7010

UCJ10.6S.TC.G.002

PassedNAVerify whetherCisco TelePresenceConductor raises analarm when theCisco MCU 4510has no encryptionfeature key installed

Alarm raisedwhen noEncryptionfeature keyenabled inMCU4510

UCJ10.6S.TC.G.003

PassedNAVerify whetherCisco TelePresenceConductor raises analarm when theCisco MCU 5310has no encryptionfeature key installed

Alarm raisedwhen noEncryptionfeature keyenabled inMCU5310

UCJ10.6S.TC.G.004

PassedNAVerify whetherCisco TelePresenceConductor raises analarmwhen the sameCisco MCU 5310 isadded more thanonce

Alarm raisedwhen the sameMCU 5310 isadded to theTelePresenceConductor

UCJ10.6S.TC.G.005

PassedNAVerify whetherCisco TelePresenceConductor raises analarmwhen the sameCisco TelePresenceServer on VM isadded more thanonce

Alarm raisedwhen the sameTelePresenceServer on VM isadded to theTelePresenceConductor

UCJ10.6S.TC.G.006



PassedNAVerify whether thefield Number ofcascade ports toreserve on theConferencetemplates page hasbeen renamed toMaximum numberof cascades in CiscoTelePresenceConductor

Change of fieldname inConductor

UCJ10.6S.TC.G.007

PassedNAVerify whether theSNMPpage displaysa Description fieldin CiscoTelePresenceConductor

Descriptionfield in SNMPpage

UCJ10.6S.TC.G.008

PassedMX300-G2 ->CiscoVCS -> Conductor->TelePresenceServer onVM ->HDLecture Conference

Verify whetherCisco TelePresenceMX300-G2 can joina HD Lectureconferencemanagedby CiscoTelePresence Serveron VM in CiscoTelepresenceConductor

Joining a HDLectureconference fromMX300-G2managed byCiscoTelePresenceServer on VM

UCJ10.6S.TC.G.009

PassedMX300-G2 ->CiscoVCS -> Conductor->TelePresenceServer on VM -> SDLecture Conference

Verify whetherCisco TelePresenceMX300-G2 can joina SD Lectureconferencemanagedby CiscoTelePresence Serveron VM in CiscoTelepresenceConductor

Joining a SDLectureconference fromMX300-G2managed byCiscoTelePresenceServer on VM

UCJ10.6S.TC.G.010

PassedMX300-G2 ->CiscoVCS -> Conductor-> TelePresenceServer 7010 -> HDLecture Conference

Verify whetherCisco TelePresenceMX300-G2 can joina HD Lectureconferencemanagedby CiscoTelePresence Server7010 in CiscoTelepresenceConductor

Joining a HDLectureconference fromMX300-G2managed byCiscoTelePresenceServer 7010

UCJ10.6S.TC.G.011



PassedMX300-G2 ->CiscoVCS -> Conductor-> TelePresenceServer 7010 -> SDLecture Conference

Verify whetherCisco TelePresenceMX300-G2 can joina SD Lectureconferencemanagedby CiscoTelePresence Server7010 in CiscoTelepresenceConductor

Joining a SDLectureconference fromMX300-G2managed byCiscoTelePresenceServer 7010

UCJ10.6S.TC.G.012

PassedMX300-G2 ->CiscoVCS -> Conductor-> TelePresenceServer 7010 ->Audio Only LectureConference

Verify whetherCisco TelePresenceMX300-G2 can joinan Audio-onlyLecture conferencemanaged by CiscoTelePresence Server7010 in CiscoTelepresenceConductor

Joining anAudio-onlyLectureconference fromMX300-G2managed byCiscoTelePresenceServer 7010

UCJ10.6S.TC.G.013

PassedMX300-G2 ->CiscoVCS -> Conductor-> TelePresenceServer onVM ->HDMeeting Conference

Verify whetherCisco TelePresenceMX300-G2 can joina HD Meetingconferencemanagedby CiscoTelePresence Serveron VM in CiscoTelepresenceConductor

Joining a HDMeetingconference fromMX300-G2managed byCiscoTelePresenceServer on VM

UCJ10.6S.TC.G.014

PassedMX300-G2 ->CiscoVCS -> Conductor-> TelePresenceServer on VM -> SDMeeting Conference

Verify whetherCisco TelePresenceMX300-G2 can joina SD Meetingconferencemanagedby CiscoTelePresence Serveron VM in CiscoTelepresenceConductor

Joining a SDMeetingconference fromMX300-G2managed byCiscoTelePresenceServer on VM

UCJ10.6S.TC.G.015



PassedMX300-G2 ->CiscoVCS -> Conductor-> TelePresenceServer 7010 -> HDMeeting Conference

Verify whetherCisco TelePresenceMX300-G2 can joina HD Meetingconferencemanagedby CiscoTelePresence Server7010 in CiscoTelepresenceConductor

Joining a HDMeetingconference fromMX300-G2managed byCiscoTelePresenceServer 7010

UCJ10.6S.TC.G.016

PassedMX300-G2 ->CiscoVCS -> Conductor-> TelePresenceServer 7010 -> SDMeeting Conference

Verify whetherCisco TelePresenceMX300-G2 can joina SD Meetingconferencemanagedby CiscoTelePresence Server7010 in CiscoTelepresenceConductor

Joining a SDMeetingconference fromMX300-G2managed byCiscoTelePresenceServer 7010

UCJ10.6S.TC.G.017

PassedSX80 Codec ->Cisco VCS ->Conductor -> MCU5310 -> MeetingConference

Verify whetherCisco TelePresenceSX80 Codec canjoin a MeetingconferencemanagedbyCiscoMCU5310in CiscoTelepresenceConductor

Joining aMeetingconference fromSX80 Codecmanaged byMCU 5310

UCJ10.6S.TC.G.018

PassedSX80 Codec ->Cisco VCS ->Conductor -> MCU5310 -> LectureConference

Verify whetherCisco TelePresenceSX80 Codec canjoin a LectureconferencemanagedbyCiscoMCU5310in CiscoTelepresenceConductor

Joining aLectureconference fromSX80 Codecmanaged byMCU 5310

UCJ10.6S.TC.G.019

PassedSX80 Codec ->Cisco VCS ->Conductor ->TelePresence Serveron VM -> HDLecture Conference

Verify whetherCisco TelePresenceSX80 Codec canjoin a HD Lectureconferencemanagedby CiscoTelePresence Serveron VM in CiscoTelepresenceConductor

Joining a HDLectureconference fromSX80 Codecmanaged byCiscoTelePresenceServer on VM

UCJ10.6S.TC.G.020



PassedSX80 Codec ->Cisco VCS ->Conductor ->TelePresence Serveron VM -> SDLecture Conference

Verify whetherCisco TelePresenceSX80 Codec canjoin a SD Lectureconferencemanagedby CiscoTelePresence Serveron VM in CiscoTelepresenceConductor

Joining a SDLectureconference fromSX80 Codecmanaged byCiscoTelePresenceServer on VM

UCJ10.6S.TC.G.021

PassedSX80 Codec ->Cisco VCS ->Conductor ->TelePresence Server7010 -> HD LectureConference

Verify whetherCisco TelePresenceSX80 Codec canjoin a HD Lectureconferencemanagedby CiscoTelePresence Server7010 in CiscoTelepresenceConductor

Joining a HDLectureconference fromSX80 Codecmanaged byCiscoTelePresenceServer 7010

UCJ10.6S.TC.G.022

PassedSX80 Codec ->Cisco VCS ->Conductor ->TelePresence Server7010 -> SD LectureConference

Verify whetherCisco TelePresenceSX80 Codec canjoin a SD Lectureconferencemanagedby CiscoTelePresence Server7010 in CiscoTelepresenceConductor

Joining a SDLectureconference fromSX80 Codecmanaged byCiscoTelePresenceServer 7010

UCJ10.6S.TC.G.023

PassedSX80 Codec ->Cisco VCS ->Conductor ->TelePresence Serveron VM -> HDMeeting Conference

Verify whetherCisco TelePresenceSX80 Codec canjoin a HD Meetingconferencemanagedby CiscoTelePresence Serveron VM in CiscoTelepresenceConductor

Joining a HDMeetingconference fromSX80 Codecmanaged byCiscoTelePresenceServer on VM

UCJ10.6S.TC.G.024



PassedSX80 Codec ->Cisco VCS ->Conductor ->TelePresence Serveron VM -> SDMeeting Conference

Verify whetherCisco TelePresenceSX80 Codec canjoin a SD Meetingconferencemanagedby CiscoTelePresence Serveron VM in CiscoTelepresenceConductor

Joining a SDMeetingconference fromSX80 Codecmanaged byCiscoTelePresenceServer on VM

UCJ10.6S.TC.G.025

PassedSX80 Codec ->Cisco VCS ->Conductor ->TelePresence Server7010 ->HDMeetingConference

Verify whetherCisco TelePresenceSX80 Codec canjoin a HD Meetingconferencemanagedby CiscoTelePresence Server7010 in CiscoTelepresenceConductor

Joining a HDMeetingconference fromSX80 Codecmanaged byCiscoTelePresenceServer 7010

UCJ10.6S.TC.G.026

PassedSX80 Codec ->Cisco VCS ->Conductor ->TelePresence Server7010 -> SDMeetingConference

Verify whetherCisco TelePresenceSX80 Codec canjoin a SD Meetingconferencemanagedby CiscoTelePresence Server7010 in CiscoTelepresenceConductor

Joining a SDMeetingconference fromSX80 Codecmanaged byCiscoTelePresenceServer 7010

UCJ10.6S.TC.G.027

PassedSX80 Codec ->Cisco VCS ->Conductor ->TelePresence Serveron VM -> HDMeeting ConferenceHD MeetingConference ->Conductor -> CiscoVCS -> MX300-G2

Verify whetherCisco TelePresenceMX300-G2 can joinas an auto dialedparticipant for a HDMeeting conferencemanaged by CiscoTelePresence Serveron VM in CiscoTelepresenceConductor

AddMX300-G2as anauto-dialedparticipant forMeeting HDconference

UCJ10.6S.TC.G.028



PassedSX80 Codec ->Cisco VCS ->Conductor ->TelePresence Serveron VM -> SDMeeting ConferenceSD MeetingConference ->Conductor -> CiscoVCS -> MX300-G2

Verify whetherCisco TelePresenceMX300-G2 can joinas an auto dialedparticipant for a SDMeeting conferencemanaged by CiscoTelePresence Serveron VM in CiscoTelepresenceConductor

AddMX300-G2as anauto-dialedparticipant forMeeting SDconference

UCJ10.6S.TC.G.029

PassedSX80 Codec ->Cisco VCS ->Conductor -> CiscoTS 7010 -> SDMeeting ConferenceSD MeetingConference ->Conductor -> CiscoVCS -> MX300-G2

Verify whetherCisco TelePresenceMX300-G2 can joinas an auto dialedparticipant for a SDMeeting conferencemanaged by CiscoTelePresence Server7010 in CiscoTelepresenceConductor

AddMX300-G2as anauto-dialedparticipant forMeeting SDconferencemanaged byCisco TS 7010

UCJ10.6S.TC.G.030

PassedSX80 Codec ->Unified CM -> SIPTrunk -> Conductor-> RendezvousConference

Verify whetherrendezvousconference call fromCisco TelePresenceSX80 Codecregistered in CiscoUnifiedCommunicationsManager to CiscoTelePresenceConductor workssuccessfully

Rendezvousconference callfrom SX80Codec toConductor

UCJ10.6S.TC.G.031

PassedSX80 Codec ->UnifiedCM ->EX90-> Add -> EX60 ->Unified CM -> SIPTrunk -> Conductor-> Ad hocConference

Verify whether adhoc conference callfrom CiscoTelePresence SX80Codec registered inCisco UnifiedCommunications toCisco TelePresenceConductor workssuccessfully

Ad hocconference callfrom SX80Codec toConductor

UCJ10.6S.TC.G.032



PassedEX90 ->UnifiedCM-> SIP Trunk ->Conductor ->RendezvousConferenceConductor -> SIPTrunk -> UnifiedCM -> SX80 Codec

Verify whetherCisco TelePresenceConductor makescall to CiscoTelePresence SX80Codec whenrendezvousconference isinitiated in CiscoTelePresenceSystem EX90

Adding SX80Codec asAuto-dialedparticipant for aRendezvousconference inConductor

UCJ10.6S.TC.G.033

PassedMX300G2 ->Unified CM -> SIPTrunk -> Conductor-> RendezvousConference

Verify whetherrendezvousconference call fromCisco TelePresenceMX300G2registered in CiscoUnifiedCommunicationsManager to CiscoTelePresenceConductor workssuccessfully

Rendezvousconference callfromMX300G2to Conductor

UCJ10.6S.TC.G.034

PassedMX300G2 ->UnifiedCM ->EX90-> Add -> EX60 ->Unified CM -> SIPTrunk -> Conductor-> Ad hocConference

Verify whether adhoc conference callfrom CiscoTelePresenceMX300G2registered in CiscoUnifiedCommunications toCisco TelePresenceConductor workssuccessfully

Ad hocconference callfromMX300G2to Conductor

UCJ10.6S.TC.G.035

PassedEX90 ->UnifiedCM-> SIP Trunk ->Conductor ->RendezvousConferenceConductor -> SIPTrunk -> UnifiedCM -> MX300G2

Verify whetherCisco TelePresenceConductor makescall to CiscoTelePresenceMX300G2 whenrendezvousconference isinitiated in CiscoTelePresenceSystem EX90

AddingMX300G2 asAuto-dialedparticipant for aRendezvousconference inConductor

UCJ10.6S.TC.G.036



PassedSX80 Codec ->Cisco VCS-E ->Cisco VCS-C ->Unified CM -> SIPTrunk -> Conductor-> RendezvousConference

Verify whetherrendezvousconference call fromCisco TelePresenceSX80 Codecregistered in CiscoUnifiedCommunicationsManager viaCollaboration Edgeto CiscoTelePresenceConductor workssuccessfully

Rendezvousconference callfrom SX80Codecregistered viaCollaborationEdge toConductor

UCJ10.6S.TC.G.037

PassedSX80 Codec ->UnifiedCM ->EX90-> Add -> EX60 ->Unified CM -> SIPTrunk -> Conductor-> Audio only ad hocConference

Verify whetheraudio only ad hocconference call fromCisco TelePresenceSX80 Codecregistered in CiscoUnifiedCommunications toCisco TelePresenceConductor workssuccessfully

Audio only Adhoc conferencecall from SX80Codec toConductor

UCJ10.6S.TC.G.038

PassedEX90 ->UnifiedCM-> SIP Trunk ->Conductor ->RendezvousConferenceConductor -> SIPTrunk -> UnifiedCM ->CiscoVCS-C-> Cisco VCS-E ->SX80 Codec

Verify whetherCisco TelePresenceConductor makescall to CiscoTelePresence SX80Codec registered inCisco UnifiedCommunicationsManager viaCollaboration Edgewhen rendezvousconference isinitiated in CiscoTelePresenceSystem EX90registered in CiscoUnifiedCommunicationsManager

Adding SX80Codecregistered viaCollaborationEdge asAuto-dialedparticipant for aRendezvousconference inConductor

UCJ10.6S.TC.G.039



PassedSX80 Codec ->Unified CM -> SIPTrunk -> Conductor-> Audio onlyRendezvousConference

Verify whetheraudio onlyrendezvousconference call fromCisco TelePresenceSX80 Codecregistered in CiscoUnifiedCommunicationsManager to CiscoTelePresenceConductor workssuccessfully

Audio onlyrendezvousconference callfrom SX80 toConductor

UCJ10.6S.TC.G.040

Cisco TelePresence ServerDefectsStatusCall Component FlowDescriptionTitleLogical ID

PassedMX200-G2->UnifiedCM->SIP Trunk->CiscoTS 7010->videoconference

To verify thatuser is able todo meet mevideoconference fromCiscoTelePresenceMX200-G2using CiscoTelePresenceServer 7010

Initiate the meetme videoconference fromMX200-G2using Cisco TS7010

UCJ10.6S.TS.G.001

PassedEX60,MX200-G2,SX80Codec ->UnifiedCM->SIP Trunk->CiscoTS 7010->videoconference

To verify thatuser is able todo videoconferencebetween CiscoTelePresenceMX200-G2,CiscoTelePresenceSX80 Codec &CiscoTelePresenceSystem EX60using CiscoTelePresenceServer 7010

ConferencebetweenMX200-G2 ,SX80 Codec &EX60 usingCisco TS 7010

UCJ10.6S.TS.G.002


Test Results SummaryCisco TelePresence Server

PassedEX60,MX200-G2,SX10Quick Set ->UnifiedCM->SIP Trunk->CiscoTS 7010->videoconference ->PresentationSharing

To verify thatuser is able todo presentationsharing in videoconferencebetween CiscoTelePresenceMX200-G2,CiscoTelePresenceSX10 Quick Set& CiscoTelePresenceSystem EX60using CiscoTelePresenceServer 7010

PresentationSharing in videoconferenceusing Cisco TS7010

UCJ10.6S.TS.G.003

PassedEX60,MX200-G2,SX80Codec ->UnifiedCM->SIP Trunk->CiscoTS 7010->videoconference->Hold/Resume

To verify thatuser is able todoHold/Resumein videoconferencebetween CiscoTelePresenceMX200-G2,CiscoTelePresenceSX80 Codec &CiscoTelePresenceSystem EX60using CiscoTelePresenceServer 7010

Hold/Resume inMX200-G2while in videoconferenceusing Cisco TS7010

UCJ10.6S.TS.G.004

Passed7861,MX300-G2,SX80Codec ->UnifiedCM->SIP Trunk->CiscoTS 7010->videoconference ->7861->Park->UnifiedCM->MX200-G2->Retrieve

To verify thatuser is able toretrieve theparked videoconference inCiscoTelePresenceMX200-G2using CiscoTelePresenceServer 7010

Retrieve theparked videoconference inMX200-G2using Cisco TS7010

UCJ10.6S.TS.G.005



PassedEX60,MX200-G2,SX10Quick Set ->UnifiedCM->SIP Trunk->CiscoTS 7010->videoconference ->PresentationSharing->Hold/Resume

To verify thatuser is able todoHold/Resumewhile sharingpresentation invideoconferencebetween CiscoTelePresenceMX200-G2,CiscoTelePresenceSX10 Quick Set& CiscoTelePresenceSystem EX60using CiscoTelePresenceServer 7010

Hold/Resume inMX200-G2while sharingpresentation inconferenceusing Cisco TS7010

UCJ10.6S.TS.G.006

Passed7861,MX200-G2,SX20Quick Set ->UnifiedCM->SIP Trunk->CiscoTS 7010->videoconference ->MX200-G2->Hold/Transfer->UnifiedCM->EX90

To verify thatuser is able todo consultativetransfer fromCiscoTelePresenceMX200-G2while in videoconferenceusing CiscoTelePresenceServer 7010

ConsultativeTransfer inMX200-G2while videoconferenceusing Cisco TS7010

UCJ10.6S.TS.G.007

PassedMX200-G2->UnifiedCM->SIP Trunk->CiscoTS 7010->videoconference SX10 QuickSet->Cisco VCS->SIPTrunk->UnifiedCM->SIPTrunk->Cisco TS 7010->video conference

To verify thatuser is able todo conferencebetween CiscoTelePresenceMX200-G2registered withUnified CM andCiscoTelePresenceSX10 Quick Setregistered withCisco VCSusing CiscoTelePresenceServer 7010

ConferencebetweenMX200-G2registered withUnified CM andSX10 Quick Setwith Cisco VCSusing Cisco TS7010

UCJ10.6S.TS.G.008



PassedMX200-G2(H.323),SX20 Quick Set->CiscoVCS->Cisco TS7010->video conference

To verify thatuser is able todo conferencebetween CiscoTelePresenceMX200-G2 asH.323 endpointand CiscoTelePresenceSX20 Quick Setas SIP endpointregistered withCisco VCSusing CiscoTelePresenceServer 7010

ConferencebetweenMX200-G2(H.323) andSX20 QuickSet(SIP)registered withCisco VCSusing Cisco TS7010

UCJ10.6S.TS.G.009

PassedSX10Quick Set->UnifiedCM->SIP Trunk->CiscoTS 7010->videoconference

To verify thatuser is able todo meet mevideoconference fromCiscoTelePresenceSX10 Quick Setusing CiscoTelePresenceServer 7010

Initiate the meetme videoconference fromSX10 Quick Setusing Cisco TS7010

UCJ10.6S.TS.G.010

PassedEX60,8945,SX10 QuickSet ->Unified CM->SIPTrunk->Cisco TS7010->video conference->PresentationSharing->Hold/Resume

To verify thatuser is able todoHold/Resumewhile sharingpresentation invideoconferencebetween CiscoTelePresenceSX10Quick Set,CiscoTelePresenceSystem EX60&IP Phone 8945using CiscoTelePresenceServer 7010

Hold/Resume inSX10 Quick Setwhile sharingpresentationusing Cisco TS7010

UCJ10.6S.TS.G.011



Passed7861,SX20 Quick Set->Unified CM->SIPTrunk->Cisco TS7010->video conference-> 7861->Park->UnifiedCM->SX10 QuickSet->Retrieve

To verify thatuser is able toretrieve theparked videoconference inCiscoTelePresenceSX10Quick Set,using CiscoTelePresenceServer 7010

Retrieve theparked videoconference inSX10 Quick Setusing Cisco TS7010

UCJ10.6S.TS.G.012

Cisco Jabber GuestDefectsStatusCall Component


PassedJabber guestclient(windows) ->CiscoExpressway-E ->CiscoExpressway-C ->Unified CM ->MX300-G2

To Verify thatuser is able tomake a call fromJabber guestclient to CiscoTelePresenceSystemMX300-G2 viaCiscoExpressway-E

Make a videocall from Jabberguest client onWindows toMX300-G2 viaCiscoExpressway-E

UCJ10.6S.JG.G.001

PassedJabber guestclient(windows) ->CiscoExpressway-E ->CiscoExpressway-C ->Unified CM ->SX80 Codec

To Verify thatuser is able tomake a call fromJabber guestclient onWindows toCiscoTelePresenceSX80 Codec viaCiscoExpressway-E

Make a videocall from Jabberguest client onWindows toSX80 codec viaCiscoExpressway-E

UCJ10.6S.JG.G.002


Test Results SummaryCisco Jabber Guest

PassedJabber guestclient(windows) ->CiscoExpressway-E ->CiscoExpressway-C ->Unified CM ->8945

To Verify thatuser is able tomake a call fromJabber guestclient onwindows toCisco Unified IPPhone 8945 viaCiscoExpressway-E

Make a videocall from Jabberguest client onwindows toCiscoUnified IPPhone 8945 viaCiscoExpressway-E

UCJ10.6S.JG.G.003

PassedJabber guestclient(windows) ->CiscoExpressway-E ->CiscoExpressway-C ->Unified CM ->9971

To Verify thatuser is able tomake a call fromJabber guestclient onwindows toCisco Unified IPPhone 9971viaCiscoExpressway-E

Make a videocall from Jabberguest client onwindows toCiscoUnified IPPhone 9971viaCiscoExpressway-E

UCJ10.6S.JG.G.004

PassedJabber guestclient(windows) ->CiscoExpressway-E ->CiscoExpressway-C ->Unified CM ->SX20 Quickset

To Verify thatuser is able tomake a call fromJabber guestclient onWindows toCiscoTelePresenceSX20 Quicksetvia CiscoExpressway-E

Make a videocall from Jabberguest client onWindows toSX20 Quicksetvia CiscoExpressway-E

UCJ10.6S.JG.G.005

PassedJabber guestclient(MAC) ->CiscoExpressway-E ->CiscoExpressway-C ->Unified CM ->MX300-G2

To Verify thatuser is able tomake a call fromJabber guestclient on MACto CiscoTelePresenceSystemMX300-G2 viaCiscoExpressway-E

Make a videocall from Jabberguest client onMAC toMX300-G2 viaCiscoExpressway-E

UCJ10.6S.JG.G.006



PassedJabber guestclient(MAC) ->CiscoExpressway-E ->CiscoExpressway-C ->Unified CM ->SX20 Quickset

To Verify thatuser is able tomake a call fromJabber guestclient on MACto CiscoTelePresenceSX20 Quicksetvia CiscoExpressway-E

Make a videocall from Jabberguest client onMAC to SX20Quickset viaCiscoExpressway-E

UCJ10.6S.JG.G.007

PassedJabber guestclient(MAC) ->CiscoExpressway-E ->CiscoExpressway-C ->Unified CM ->EX60

To Verify thatuser is able tomake a call fromJabber guestclient on MACto EX60 viaCiscoExpressway-E

Make a videocall from Jabberguest client onMAC to EX60via CiscoExpressway-E

UCJ10.6S.JG.G.008

PassedJabber guestclient(MAC) ->CiscoExpressway-E ->CiscoExpressway-C ->Unified CM ->8945

To Verify thatuser is able tomake a call fromJabber guestclient on MACto Cisco UnifiedIP Phone 8945via CiscoExpressway-E

Make a videocall from Jabberguest client onMAC to CiscoUnified IPPhone 8945 viaCiscoExpressway-E

UCJ10.6S.JG.G.009

PassedJabber guestclient(MAC) ->CiscoExpressway-E ->CiscoExpressway-C ->Unified CM ->9971

To Verify thatuser is able tomake a call fromJabber guestclient on MACto 9971 viaCiscoExpressway-E

Make a videocall from Jabberguest client onMAC to CiscoUnified IPPhone 9971 viaCiscoExpressway-E

UCJ10.6S.JG.G.010



PassedJabber guestclient(windows) ->CiscoExpressway-E ->CiscoExpressway-C ->Unified CM ->SX80 Codec -> addparticipant ->MX300-G2

To Verify thatuser is able toSharepresentationduring adhocconference callbetween SX80Codec,MX300-G2 andJabber guestclient onwindows viaCiscoExpressway-E

Sharingpresentationduring adhocconference callbetween SX80Codec, Jabberguest client onwindows andMX300-G2 viaCiscoExpressway-E

UCJ10.6S.JG.G.011

PassedJabber guestclient(windows) ->CiscoExpressway-E ->CiscoExpressway-C ->Unified CM -> SIPTrunk -> MCU4510

To Verify thatuser is able tomake a meet meconference callfrom Jabberguest client toCiscoTelePresenceMCU 4510 viaCiscoExpressway-E

Make ameet meconference callfrom Jabberguest client onWindows toMCU 4510 viaCiscoExpressway-E

UCJ10.6S.JG.G.012

PassedJabber guestclient(windows) ->CiscoExpressway-E ->CiscoExpressway-C ->Unified CM -> SIPTrunk -> Cisco TS7010

To Verify thatuser is able tomake a meet meconference callfrom Jabberguest client toCiscoTelePresenceServer 7010 viaCiscoExpressway-E

Make ameet meconference callfrom Jabberguest client onWindows toCisco TS 7010via CiscoExpressway-E

UCJ10.6S.JG.G.013



PassedJabber guestclient(windows) ->CiscoExpressway-E ->CiscoExpressway-C ->Unified CM -> SIPTrunk ->Conductor-> MCU 5310

To Verify thatuser is able tomake a meet meconference callfrom Jabberguest client toCiscoTelePresenceConductor withCiscoTelePresenceMCU 5310 viaCiscoExpressway-E

Make ameet meconference callfrom Jabberguest client onWindows toCiscoTelePresenceConductor withMCU 5310 viaCiscoExpressway-E

UCJ10.6S.JG.G.014

PassedJabber guestclient(windows) ->CiscoExpressway-E ->CiscoExpressway-C ->Unified CM -> SIPTrunk ->Conductor-> Cisco TS 7010

To Verify thatuser is able tomake a meet meconference callfrom Jabberguest client toCiscoTelePresenceConductor withCiscoTelePresenceServer 7010 viaCiscoExpressway-E

Make ameet meconference callfrom Jabberguest client onWindows toCiscoTelePresenceConductor withCisco TS 7010via CiscoExpressway-E

UCJ10.6S.JG.G.015

PassedJabber guestclient(MAC) ->CiscoExpressway-E ->CiscoExpressway-C ->Unified CM -> SIPTrunk -> MCU4510

To Verify thatuser is able tomake a meet meconference callfrom Jabberguest client toCiscoTelePresenceMCU 4510 viaCiscoExpressway-E

Make ameet meconference callfrom Jabberguest client onMAC to MCU4510 via CiscoExpressway-E

UCJ10.6S.JG.G.016



PassedJabber guestclient(MAC) ->CiscoExpressway-E ->CiscoExpressway-C ->Unified CM -> SIPTrunk -> Cisco TS7010

To Verify thatuser is able tomake a meet meconference callfrom Jabberguest client toCiscoTelePresenceServer 7010 viaCiscoExpressway-E

Make ameet meconference callfrom Jabberguest client onMAC to CiscoTS 7010 viaCiscoExpressway-E

UCJ10.6S.JG.G.017

PassedJabber guestclient(MAC) ->CiscoExpressway-E ->CiscoExpressway-C ->Unified CM -> SIPTrunk ->Conductor-> MCU 5310

To Verify thatuser is able tomake a meet meconference callfrom Jabberguest client toCiscoTelePresenceConductor withCiscoTelePresenceMCU 5310 viaCiscoExpressway-E

Make ameet meconference callfrom Jabberguest client onMAC to CiscoTelePresenceConductor withMCU 5310 viaCiscoExpressway-E

UCJ10.6S.JG.G.018

PassedJabber guestclient(MAC) ->CiscoExpressway-E ->CiscoExpressway-C ->Unified CM -> SIPTrunk ->Conductor-> Cisco TS 7010

To Verify thatuser is able tomake a meet meconference callfrom Jabberguest client toCiscoTelePresenceConductor withCiscoTelePresenceServer 7010 viaCiscoExpressway-E

Make ameet meconference callfrom Jabberguest client onMAC to CiscoTelePresenceConductor withCisco TS 7010via CiscoExpressway-E

UCJ10.6S.JG.G.019



PassedJabber guestclient(IOS) ->CiscoExpressway-E ->CiscoExpressway-C ->Unified CM ->MX300-G2

To Verify thatuser is able tomake a call fromJabber guestclient on IOS toCiscoTelePresenceSystemMX300-G2 viaCiscoExpressway-E

Make a videocall from Jabberguest client onIOS toMX300-G2 viaCiscoExpressway-E

UCJ10.6S.JG.G.020

PassedJabber guestclient(Windows) ->CiscoExpressway-E ->CiscoExpressway-C ->Unified CM ->EX90

To verify thatuser is able tocall adhoc linkfrom jabberguest client onWindows

Call adhoc linkfrom JabberGuest Client onWindows

UCJ10.6S.JG.G.021

PassedJabber guestclient(MAC) ->CiscoExpressway-E ->CiscoExpressway-C ->Unified CM ->EX90 -> addparticipant -> EX60-> video conference

To Verify thatuser is able to doadhocconferencevideo callbetween jabberguest client onMAC,EX90 andEX60 via CiscoExpressway-E

AdhocConferencebetween jabberguest client onMAC, EX90and EX60 viaCiscoExpressway-E

UCJ10.6S.JG.G.022

PassedJabber guestclient(MAC) ->CiscoExpressway-E ->CiscoExpressway-C ->Unified CM ->EX90 ->Presentationsharing

To Verify thatuser is able toSharepresentationbetween EX90and Jabber guestclient on MACvia CiscoExpressway-E

Sharingpresentationbetween EX90and Jabber guestclient on MACvia CiscoExpressway-E

UCJ10.6S.JG.G.023



PassedJabber guestclient(IOS) ->CiscoExpressway-E ->CiscoExpressway-C ->Unified CM -> SIPTrunk -> MCU5310

To Verify thatuser is able tomake a meet meconference callfrom Jabberguest client onIOS to CiscoTelePresenceMCU 5310 viaCiscoExpressway-E

Make ameet meconference callfrom Jabberguest client onIOS to MCU5310 via CiscoExpressway-E

UCJ10.6S.JG.G.024

PassedJabber guestclient(IOS) ->CiscoExpressway-E ->CiscoExpressway-C ->Unified CM -> SIPTrunk -> Cisco TS7010

To Verify thatuser is able tomake a meet meconference callfrom Jabberguest client onIOS to CiscoTelePresenceServer 7010 viaCiscoExpressway-E

Make ameet meconference callfrom Jabberguest client onIOS to Cisco TS7010 via CiscoExpressway-E

UCJ10.6S.JG.G.025

Cisco Collaboration ExpresswayDefectsStatusCall Component


Passed500-32 -> UnifiedCM -> Cisco VCS ->Cisco VCSExpressway -> EX90(EM user) ->Hold/Transfer ->Cisco VCSExpressway -> CiscoVCS -> Unified CM-> SX80 Codec

Verify whether theconsultative calltransfer from CiscoTelePresence SystemEX90 which islogged in asExtension Mobilityuser registered inCisco UnifiedCommunicationsManager viaCollaboration EDGEto CiscoTelePresence SX80Codec registeredwith Cisco UnifiedCommunicationsManager workssuccessfully

Consultativecall transferfrom EX90logged in asEM user viaEDGE

UCJ10.6S.EDGE.G.001


Test Results SummaryCisco Collaboration Expressway

PassedEX90 (EM user) ->Cisco VCSExpressway -> CiscoVCS -> Unified CM-> SX80 Codec

Verify whether thevideo call fromCisco TelePresenceSystemEX90 loggedin as ExtensionMobility userregistered in CiscoUnifiedCommunicationsManager viaCollaboration EDGEto CiscoTelePresence SX80Codec registeredwith Cisco UnifiedCommunicationsManager workssuccessfully

Making videocall fromEX90 loggedin as EM uservia EDGE

UCJ10.6S.EDGE.G.002

PassedEX90 (EM user) ->Cisco VCSExpressway -> CiscoVCS -> Unified CM-> SX80 Codec ->Hold/Resume

Verify whether theHold/Resume forvideo call in CiscoTelePresence SystemEX90 logged in asExtension Mobilityuser registered inCisco UnifiedCommunicationsManager viaCollaboration EDGEto CiscoTelePresence SX80Codec registeredwith Cisco UnifiedCommunicationsManager workssuccessfully

Hold/Resumevideo call fromEX90 loggedin as EM uservia EDGE

UCJ10.6S.EDGE.G.003



PassedEX90 (EM user) ->Cisco VCSExpressway -> CiscoVCS -> Unified CMcluster 1 -> SIP trunk-> Unified CMcluster 2 -> SX80Codec

Verify whether thevideo call fromCisco TelePresenceSystemEX90 loggedin as ExtensionMobility userregistered with CiscoUnifiedCommunicationsManager cluster 1via CollaborationEDGE to CiscoTelePresence SX80Codec registeredwith Cisco UnifiedCommunicationsManager cluster 2through SIP trunkworks successfully

Makinginter-clustervideo call fromEX90 loggedin as EM uservia EDGE

UCJ10.6S.EDGE.G.004

PassedEX90 (EM user) ->Cisco VCSExpressway -> CiscoVCS -> Unified CM-> EX60 ->Presentation sharing

Verify whether thepresentation sharingfrom CiscoTelePresence SystemEX90 logged in asExtension Mobilityuser, registered withCisco UnifiedCommunicationsManager viaCollaboration EDGEto CiscoTelePresence SystemEX60 registeredwithCisco UnifiedCommunicationsManager workssuccessfully

Presentationsharing fromEX90 loggedin as EM uservia EDGE

UCJ10.6S.EDGE.G.005



PassedEX90 (EM user) ->Cisco VCSExpressway -> CiscoVCS -> Unified CMcluster 1 -> SIP trunk-> Unified CMcluster 2 -> SX80Codec ->Presentation sharing

Verify whether thepresentation sharingfrom CiscoTelePresence SystemEX90 logged in asExtension Mobilityuser registered withCisco UnifiedCommunicationsManager cluster 1via CollaborationEDGE to CiscoTelePresence SX80Codec registeredwith Cisco UnifiedCommunicationsManager cluster 2through SIP trunkworks successfully

Makinginter-clustervideo call andsharingpresentationfrom EX90logged in asEM user

UCJ10.6S.EDGE.G.006

PassedEX90 (EM user) ->Cisco VCSExpressway -> CiscoVCS -> Unified CM-> SX80 CodecEX90 (EM user) ->Add participant ->Cisco VCSExpressway -> CiscoVCS -> Unified CM-> EX60

Verify whethermultisite conferencewith threeparticipants fromCisco TelePresenceSystemEX90 loggedin as ExtensionMobility user viaCollaboration EDGEworks successfully

Makingmultisiteconferencewith threeparticipants ofwhich EX90logged in asEM user viaEDGE

UCJ10.6S.EDGE.G.007

PassedEX90 -> Cisco VCSExpressway -> CiscoVCS -> Unified CMcluster 1 -> SIP trunk-> Unified CMcluster 2 -> SX80Codec

Verify whether thevideo call fromCisco TelePresenceSystem EX90registered with CiscoUnifiedCommunicationsManager cluster 1via CollaborationEDGE to CiscoTelePresence SX80Codec registeredwith Cisco UnifiedCommunicationsManager cluster 2through SIP trunkworks successfully

Makinginter-clustervideo call fromEX90 viaEDGE

UCJ10.6S.EDGE.G.008



PassedEX90 -> Cisco VCSExpressway -> CiscoVCS -> Unified CM-> EX60 ->Presentation sharing

Verify whether thepresentation sharingfrom CiscoTelePresence SystemEX90 registeredwithCisco UnifiedCommunicationsManager viaCollaboration EDGEto CiscoTelePresence SystemEX60 egistered withCisco UnifiedCommunicationsManager workssuccessfully

Making videocall andpresentationsharing fromEX90 viaEDGE

UCJ10.6S.EDGE.G.009

PassedEX90-> Cisco VCSExpressway -> CiscoVCS -> Unified CMcluster 1 -> SIP trunk-> Unified CMcluster 2 -> SX80Codec ->presentation sharing

Verify whether thepresentation sharingfrom CiscoTelePresence SystemEX90 registeredwithCisco UnifiedCommunicationsManager cluster 1via CollaborationEDGE to CiscoTelePresence SX80Codec registeredwith Cisco UnifiedCommunicationsManager cluster 2through SIP trunkworks successfully

Makinginter-clustervideo call andsharingpresentationfrom EX90

UCJ10.6S.EDGE.G.010

Passed500-32 -> UnifiedCM -> Cisco VCS ->Cisco VCSExpressway -> SX20Quick Set

Verify whether thevideo call fromCisco TelePresenceSystem 500-32 canbe establishedsuccessfully to CiscoTelePresence SX20Quick Set registeredin Unified CM viaCollaboration EDGE

Making VideoCall from500-32registered withUnified CM toSX20 QuickSet registeredin Unified CMviaCollaborationEDGE

UCJ10.6S.EDGE.G.011



Passed500-32 -> UnifiedCM -> Cisco VCS ->Cisco VCSExpressway ->Integrator PackageC90

Verify whether thevideo call fromCisco TelePresenceSystem 500-32 canbe established toCisco TelePresenceSystem IntegratorPackage C90registered in UnifiedCM viaCollaboration EDGE

Making VideoCall from500-32registered withUnified CM toIntegratorPackage C90registered inUnified CMviaCollaborationEDGE

UCJ10.6S.EDGE.G.012

Passed500-32 -> UnifiedCM -> Cisco VCS ->Cisco VCSExpressway -> SX20Quick Set ->Presentation Sharing

Verify whether thepresentation in CiscoTelePresence System500-32 can be sharedwith CiscoTelePresence SX20Quick Set registeredin Unified CM viaCollaboration EDGE

Presentationsharing in500-32registered withUnified CM toSX20 QuickSet registeredin Unified CMviaCollaborationEDGE

UCJ10.6S.EDGE.G.013

Passed500-32 -> UnifiedCM -> Cisco VCS ->Cisco VCSExpressway ->Integrator PackageC90 -> PresentationSharing

Verify whether thepresentation in CiscoTelePresence System500-32 can be sharedwith CiscoTelePresence SystemIntegrator PackageC90 registered inCisco UnifiedCommunicationsManager viaCollaboration EDGE

Presentationsharing in500-32registered withUnified CM toIntegratorPackage C90registered inUnified CMviaCollaborationEDGE

UCJ10.6S.EDGE.G.014



PassedIntegrator PackageC90 -> Cisco VCSExpressway -> CiscoVCS A -> UnifiedCM -> SIP Trunk ->Cisco VCS B ->Cisco TelePresenceMX300-G2

Verify whether videocall from CiscoTelePresence SystemIntegrator PackageC90 registered withCisco UnifiedCommunicationsManager viaCollaboration EDGEto CiscoTelePresenceMX300-G2registered with CiscoVideoCommunicationServer can beestablishedsuccessfully.

Making videocall fromIntegratorPackage C90registered inUnified CMviaCollaborationEDGE toCiscoTelePresenceMX300-G2registered withCisco VCS

UCJ10.6S.EDGE.G.015

PassedIntegrator PackageC90 -> Cisco VCSExpressway -> CiscoVCS -> Unified CM-> SX80 Codec

Verify whether videocall from CiscoTelePresence SystemIntegrator PackageC90 registered withCisco UnifiedCommunicationsManager viacollaboration EDGEto CiscoTelePresence SX80Codec registeredwith Cisco UnifiedCommunicationsManager can beestablishedsuccessfully

Making videocall fromIntegratorPackage C90register inUnified CMviaCollaborationEDGE toSX80 Codecregistered withUnified CM

UCJ10.6S.EDGE.G.016



PassedSX20 Quick Set ->Cisco VCSExpressway -> CiscoVCS -> Unified CM-> CiscoTelePresenceMX300-G2

Verify whether videocall from CiscoTelePresence SX20Quick Set registeredwith Cisco UnifiedCommunicationsManager viaCollaboration EDGEto CiscoTelePresenceMX300-G2registered withUnifiedCommunicationsManager can beestablishedsuccessfully.

Making videocall fromSX20 QuickSet registeredwith UnifiedCM viaCollaborationEDGE toCiscoTelePresenceMX300-G2registered withUnified CMthrough

UCJ10.6S.EDGE.G.017

PassedSX20 Quick Set ->Cisco VCSExpressway -> CiscoVCS->Unified CM-> CiscoTelePresence SX80Codec

Verify whether videocall from SX20Quick Set registeredwith Cisco UnifiedCommunicationsManager throughCollaboration EDGEto CiscoTelePresence SX80Codec registeredwith UnifiedCommunicationsManager can beestablished viaCollaborationEDGE.

Making videocall fromSX20 QuickSet registeredwith UnifiedCM throughCollaborationEDGE toCiscoTelePresenceSX80 Codecregistered withUnified CM

UCJ10.6S.EDGE.G.018

PassedSX20 Quick Set ->Cisco VCSExpressway -> CiscoVCS -> Unified CM-> CiscoTelePresence SX80Codec ->Presentation Sharing

Verify whether thepresentation in CiscoTelePresence SX20QuickSet registeredwith Cisco UnifiedCommunicationsManager viaCollaboration EDGEcan be sharedsuccessfully withCisco TelePresenceSX80 Codecregistered with CiscoUnifiedCommunicationsManager

Presentationsharing inSX20QuickSetregistered withUnified CMviaCollaborationEDGE toSX80 Codecregistered withUnified CM

UCJ10.6S.EDGE.G.019



PassedSX20 Quick Set ->Cisco VCSExpressway -> CiscoVCS A -> UnifiedCM -> SIP Trunk ->Cisco VCS B ->Cisco TelePresenceSX80 Codec ->Presentation Sharing

Verify whether thepresentation in CiscoTelePresence SX20Quick Set registeredwith Cisco UnifiedCommunicationsManager viaCollaboration EDGEcan be shared withCisco TelePresenceSX80 Codecregistered with CiscoVideoCommunicationServer.

Presentationsharing inSX20 QuickSet registeredwith UnifiedCM viaCollaborationEDGE toCiscoTelePresenceSX80 Codecregistered withCisco VCS.

UCJ10.6S.EDGE.G.020

PassedCisco TelePresenceMX300-G2 ->Unified CM -> CiscoVCS -> Cisco VCSExpressway -> SX20QuickSet ->Presentation Sharing

Verify whether thepresentation in CiscoTelePresenceMX300-G2 can beshared with SX20Quick Set registeredin UnifiedCommunicationsManager viaCollaboration EDGE

Presentationsharing inCiscoTelePresenceMX300-G2registered withUnified CM toSX20 QuickSet registeredin Unified CMviaCollaborationEDGE

UCJ10.6S.EDGE.G.021

PassedCisco TelePresenceMX300-G2 -> CiscoVCS B -> SIP Trunk-> Unified CM ->Cisco VCS A->Cisco VCSExpressway ->CollaborationEDGE-> CiscoTelePresence SX80Codec ->Presentation Sharing

Verify whether thepresentation in CiscoTelePresenceMX300-G2registered with CiscoVideoCommunicationServer can be sharedwith CiscoTelePresence SX20Quick Set registeredin UnifiedCommunicationsManager viaCollaboration EDGE

Presentationsharing inCiscoTelePresenceMX300-G2registered withCisco VCS toSX20 QuickSet registeredin Unified CMviaCollaborationEDGE

UCJ10.6S.EDGE.G.022



PassedEX90 -> Cisco VCSB-> SIP Trunk ->Unified CM -> CiscoTelePresenceMX300-G2 ->Hold/Transfer ->Unified CM -> CiscoVCSA ->CiscoVCSExpressway -> SX20Quick Set

Verify whether theConsultative calltransfer from CiscoTelePresenceMX300-G2registered with CiscoUnifiedCommunicationsManager to CiscoTelePresence SX20Quick Set registeredwith Cisco UnifiedCommunicationsManager viaCollaboration EDGEworks successfully.

ConsultativeCall Transferfrom CiscoTelePresenceMX300-G2registered withUnified CM toSX20 QuickSet registeredwith UnifiedCM viaCollaborationEDGE.

UCJ10.6S.EDGE.G.023

PassedSX20 Quick Set ->Cisco VCSExpressway -> CiscoVCS A -> UnifiedCM -> SIP Trunk ->Cisco VCS B ->Cisco TelePresenceSX80 Codec ->Presentation Sharing

Verify whether thepresentation in CiscoTelePresence SX20Quick Set registeredwith Cisco UnifiedCommunicationsManager viaCollaboration EDGEcan be shared withCisco TelePresenceSX80 Codecregistered with CiscoVideoCommunicationServer.

Presentationsharing inSX20 QuickSet registeredwith UnifiedCM viaCollaborationEDGE toCiscoTelePresenceSX80 Codecregistered withCisco VCS.

UCJ10.6S.EDGE.G.024

PassedCisco TelePresenceMX300-G2 ->Unified CM -> CiscoVCS -> Cisco VCSExpressway -> SX20Quick Set ->Presentation Sharing

Verify whether thepresentation in CiscoTelePresenceMX300-G2 can beshared with SX20Quick Set registeredin UnifiedCommunicationsManager viaCollaboration EDGE

Presentationsharing inCiscoTelePresenceMX300-G2registered withUnified CM toSX20 QuickSet registeredin Unified CMviaCollaborationEDGE

UCJ10.6S.EDGE.G.025



PassedCisco TelePresenceMX300-G2 -> CiscoVCS B -> SIP Trunk-> Unified CM ->Cisco VCS A->Cisco VCSExpressway -> CiscoTelePresence SX80Codec ->Presentation Sharing

Verify whether thepresentation in CiscoTelePresenceMX300-G2registered with CiscoVideoCommunicationServer can be sharedwith CiscoTelePresence SX20Quick Set registeredin UnifiedCommunicationsManager viaCollaboration EDGE

Presentationsharing inCiscoTelePresenceMX300-G2registered withCisco VCS toSX20 QuickSet registeredin Unified CMviaCollaborationEDGE

UCJ10.6S.EDGE.G.026

PassedEX90 -> Cisco VCSB-> SIP Trunk ->Unified CM -> CiscoTelePresenceMX300-G2 ->Hold/Transfer ->Unified CM -> CiscoVCS A-> Cisco VCSExpressway -> SX20Quick Set

Verify whether theConsultative calltransfer from CiscoTelePresenceMX300-G2registered with CiscoUnifiedCommunicationsManager to CiscoTelePresence SX20Quick Set registeredwith Cisco UnifiedCommunicationsManager viaCollaboration EDGEworks successfully.

ConsultativeCall Transferfrom CiscoTelePresenceMX300-G2registered withUnified CM toSX20 QuickSet registeredwith UnifiedCM viaCollaborationEDGE.

UCJ10.6S.EDGE.G.027

PassedSX10 Quick Set ->Unified CM -> CiscoVCS -> Cisco VCSExpressway ->SX20Quick Set

Verify whether videocall from CiscoTelePresence SX10Quick Set registeredwith Cisco UnifiedCommunicationsManager to CiscoTelePresence SX20Quick Set registeredwith Cisco UnifiedCommunicationsManager viaCollaboration Edgecan be establishedsuccessfully.

Making videocall fromSX10 QuickSet registeredwith UnifiedCM to SX20Quick Setregistered withUnified CMviaCollaborationEDGE

UCJ10.6S.EDGE.G.028



PassedSX10 Quick Set ->Unified CM -> CiscoVCS -> Cisco VCSExpressway ->Integrator PackageC90

Verify whether videocall from CiscoTelePresence SX10Quick Set registeredwith Cisco UnifiedCommunicationsManager to CiscoTelePresence SystemIntegrator PackageC90 registered withCisco UnifiedCommunicationsManager viaCollaboration Edgecan be establishedsuccessfully.

Making videocall fromSX10 QuickSet registeredwith UnifiedCM toIntegratorPackage C90registered withUnified CMviaCollaborationEDGE

UCJ10.6S.EDGE.G.029

Cisco Prime Collaboration

Cisco Prime Collaboration ProvisioningDefectsStatusDescriptionTitleLogical ID

PassedGo to Deploy-> BatchProvisioning and verifywhether user is able to viewCountry specific dial plansDial Plan system service isadded and activated asdefault at Cisco UnifiedCommunications ManagerWeb GUI while addingCisco UnifiedCommunications Managerwith Cisco PrimeCollaboration Provisioning

Provision theCountry specificDial Plan by defaultwhile addingUnified CM in CPCProvisioning

UCJ10.6S.CPC-PR.G.001


Test Results SummaryCisco Prime Collaboration

PassedGo to Deploy-> BatchProvisioning and verifywhether user is able to viewAdHoc Conference systemservice is added andactivated as default at CiscoUnified CommunicationsManager Web GUI whileadding Cisco UnifiedCommunications Managerwith Cisco PrimeCollaboration Provisioning

Provision theAdHoc Conferenceby default whileadding Unified CMinCPCProvisioning


PassedGo to Deploy-> BatchProvisioning and verifywhether user is able to viewMeetme Conference systemservice is added andactivated as default at CiscoUnified CommunicationsManager Web GUI whileadding Cisco UnifiedCommunications Managerwith Cisco PrimeCollaboration Provisioning

Provision theMeetmeConferenceby default whileadding Unified CMinCPCProvisioning


PassedGo to Deploy-> BatchProvisioning and verifywhether user is able to viewOne Touch Transfer systemservice is added andactivated as default at CiscoUnified CommunicationsManager Web GUI whileadding Cisco UnifiedCommunications Managerwith Cisco PrimeCollaboration Provisioning

Provision the OneTouch Transfer bydefault while addingUnified CM in CPCProvisioning


PassedGo to Deploy-> BatchProvisioning and verifywhether user is able to viewBLF Speed Dials systemservice is added andactivated as default at CiscoUnified CommunicationsManager Web GUI whileadding Cisco UnifiedCommunications Managerwith Cisco PrimeCollaboration Provisioning

Provision the BLFSpeed Dials bydefault while addingUnified CM in CPCProvisioning



Test Results SummaryCisco Prime Collaboration Provisioning

PassedGo to Deploy-> BatchProvisioning and verifywhether user is able to viewIntercom system service isadded and activated asdefault at Cisco UnifiedCommunications ManagerWeb GUI while addingCisco UnifiedCommunications Managerwith Cisco PrimeCollaboration Provisioning

Provision theIntercom by defaultwhile addingUnified CM in CPCProvisioning


PassedGo to Deploy-> BatchProvisioning and verifywhether user is able to viewDirected Call Park systemservice is added andactivated as default at CiscoUnified CommunicationsManager Web GUI whileadding Cisco UnifiedCommunications Managerwith Cisco PrimeCollaboration Provisioning

Provision theDirected Call Parkby default whileadding Unified CMinCPCProvisioning


PassedGo to Deploy-> BatchProvisioning and verifywhether user is able to viewHunt Group/ Call Queuingsystem service is added andactivated as default at CiscoUnified CommunicationsManager Web GUI whileadding Cisco UnifiedCommunications Managerwith Cisco PrimeCollaboration Provisioning

Provision the HuntGroup/ CallQueuing by defaultwhile addingUnified CM in CPCProvisioning


PassedGo to Deploy-> BatchProvisioning and verifywhether user is able to viewAutomatic Video systemservice is added andactivated as default at CiscoUnified CommunicationsManager Web GUI whileadding Cisco UnifiedCommunications Managerwith Cisco PrimeCollaboration Provisioning

Provision theAutomatic Video bydefault while addingUnified CM in CPCProvisioning




PassedGo to Deploy-> BatchProvisioning and verifywhether user is able to viewAuto Attendant systemservice is added andactivated as default at CiscoUnified CommunicationsManager Web GUI whileadding Cisco UnifiedCommunications Managerwith Cisco PrimeCollaboration Provisioning

Provision the AutoAttendant by defaultwhile addingUnified CM in CPCProvisioning


PassedGo to Deploy-> BatchProvisioning and verifywhether user is able to viewVisual Voicemail systemservice is added andactivated as default at CiscoUnified CommunicationsManager Web GUI whileadding Cisco UnifiedCommunications Managerwith Cisco PrimeCollaboration Provisioning

Provision the VisualVoicemail bydefault while addingUnified CM in CPCProvisioning


PassedGo to Deploy-> BatchProvisioning and verifywhether user is able to viewCall Pickup Groups systemservice is added andactivated as default at CiscoUnified CommunicationsManager Web GUI whileadding Cisco UnifiedCommunications Managerwith Cisco PrimeCollaboration Provisioning

Provision the CallPickup Groups bydefault while addingUnified CM in CPCProvisioning


PassedGo to Deploy-> BatchProvisioning and verifywhether user is able to viewPhone Button Templatessystem service is added andactivated as default at CiscoUnified CommunicationsManager Web GUI whileadding Cisco UnifiedCommunications Managerwith Cisco PrimeCollaboration Provisioning

Provision the PhoneButton Templatesby default whileadding Unified CMinCPCProvisioning




PassedGo to Deploy-> BatchProvisioning and verifywhether user is able to viewCall back on busy systemservice is added andactivated as default at CiscoUnified CommunicationsManager Web GUI whileadding Cisco UnifiedCommunications Managerwith Cisco PrimeCollaboration Provisioning

Provision the Callback on busy bydefault while addingUnified CM in CPCProvisioning


PassedGo to Deploy-> BatchProvisioning and verifywhether user is able to viewMusic on hold systemservice is added andactivated as default at CiscoUnified CommunicationsManager Web GUI whileadding Cisco UnifiedCommunications Managerwith Cisco PrimeCollaboration Provisioning

Provision theMusicon hold by defaultwhile addingUnified CM in CPCProvisioning


PassedGo to Deploy-> BatchProvisioning and verifywhether user is able to viewCorporate Directory systemservice is added andactivated as default at CiscoUnified CommunicationsManager Web GUI whileadding Cisco UnifiedCommunications Managerwith Cisco PrimeCollaboration Provisioning

Provision theCorporate Directoryby default whileadding Unified CMinCPCProvisioning


PassedGo to Deploy-> BatchProvisioning and verifywhether user is able to viewSingle Number Reachsystem service is added andactivated as default at CiscoUnified CommunicationsManager Web GUI whileadding Cisco UnifiedCommunications Managerwith Cisco PrimeCollaboration Provisioning

Single NumberReach systemservice at UnifiedCMWebGUI whileadding Unified CMinCPCProvisioning




PassedGo to Deploy-> BatchProvisioning and verifywhether user is able to viewGateway templates systemservice is added andactivated as default at CiscoUnified CommunicationsManager Web GUI whileadding Cisco UnifiedCommunications Managerwith Cisco PrimeCollaboration Provisioning

Gateway templatessystem service atUnified CMWebGUI while addingUnified CM in CPCProvisioning


PassedGo to Deploy->UserProvisioning and verifywhether end user is able toimport users from LDAP toCisco Prime CollaborationProvisioning with newlyaddedDepartment customerfield information

Import users withnewly addedDepartmentcustomer fieldinformation fromLDAP


PassedGo to Deploy->UserProvisioning and verifywhether end user is able toimport users from LDAP toCisco Prime CollaborationProvisioning with newlyadded Manager User IDcustomer field information

Import users withnewly addedManager User IDcustomer fieldinformation fromLDAP


PassedGo to Deploy->UserProvisioning and verifywhether end user is able toimport users from LDAP toCisco Prime CollaborationProvisioning with newlyadded Title customer fieldinformation

Import users withnewly added Titlecustomer fieldinformation fromLDAP


PassedGo to Deploy->UserProvisioning and verifywhether end user is able toimport users from LDAP toCisco Prime CollaborationProvisioning with newlyadded City customer fieldinformation

Import users withnewly added Citycustomer fieldinformation fromLDAP




PassedGo to Deploy->UserProvisioning and verifywhether end user is able toimport users from LDAP toCisco Prime CollaborationProvisioning with newlyadded State customer fieldinformation

Import users withnewly added Statecustomer fieldinformation fromLDAP


PassedGo to Deploy->UserProvisioning and verifywhether end user is able toimport users from LDAP toCisco Prime CollaborationProvisioning with newlyadded Office customer fieldinformation

Import users withnewly added Officecustomer fieldinformation fromLDAP


PassedGo to Deploy->UserProvisioning and verifywhether end user is able toimport users from LDAP toCisco Prime CollaborationProvisioning with newlyadded Company customerfield information

Import users withnewly addedCompany customerfield informationfrom LDAP


PassedGo to Deploy->UserProvisioning and verifywhether end user is able toimport users from LDAP toCisco Prime CollaborationProvisioning with newlyadded Street customer fieldinformation

Import users withnewly added Streetcustomer fieldinformation fromLDAP


PassedGo to Deploy->UserProvisioning and verifywhether end user is able toimport users from LDAP toCisco Prime CollaborationProvisioning with newlyadded Country customerfield information

Import users withnewly addedCountry customerfield informationfrom LDAP


PassedGo to Deploy->UserProvisioning and verifywhether end user is able tofilter particular User IDunder User Provisioningpage by using Departmentcustomer field

Filter User ID byusing Departmentcustomer fieldthrough CPCProvisioning




PassedGo to Deploy->UserProvisioning and verifywhether end user is able tofilter particular User IDunder User Provisioningpage by usingManager UserID customer field

Filter User ID byusingManager UserID customer fieldthrough CPCProvisioning


PassedGo to Deploy->UserProvisioning and verifywhether end user is able tofilter particular User IDunder User Provisioningpage by using Title customerfield

Filter User ID byusing Title customerfield through CPCProvisioning


PassedGo to Deploy->UserProvisioning and verifywhether end user is able tofilter particular User IDunder User Provisioningpage by using City customerfield

Filter User ID byusing City customerfield through CPCProvisioning


PassedGo to Deploy->UserProvisioning and verifywhether end user is able tofilter particular User IDunder User Provisioningpage by using Statecustomer field

Filter User ID byusing Statecustomer fieldthrough CPCProvisioning


PassedGo to Deploy->UserProvisioning and verifywhether end user is able tofilter particular User IDunder User Provisioningpage by using Officecustomer field

Filter User ID byusing Officecustomer fieldthrough CPCProvisioning


PassedGo to Deploy->UserProvisioning and verifywhether end user is able tofilter particular User IDunder User Provisioningpage by using Companycustomer field

Filter User ID byusing Companycustomer fieldthrough CPCProvisioning




PassedGo to Deploy->UserProvisioning and verifywhether end user is able tofilter particular User IDunder User Provisioningpage by using Streetcustomer field

Filter User ID byusing Streetcustomer fieldthrough CPCProvisioning


PassedGo to Deploy->UserProvisioning and verifywhether end user is able tofilter particular User IDunder User Provisioningpage by using Countrycustomer field

Filter User ID byusing Countrycustomer fieldthrough CPCProvisioning


PassedGo to Deploy->UserProvisioning and verifywhether end user is able toimport Japanese users fromLDAP to Cisco PrimeCollaboration Provisioningwith newly added customerfields information

Import Japaneseusers from LDAPwith newly addedcustomer fieldsinformation


PassedGo to Deploy->UserProvisioning and verifywhether user is able to createJapanese User IDsuccessfully with newlyadded customer fieldsthrough User Provisioningpage

Create Japaneseusers with newlyadded customerfields through UserProvisioning page


PassedGo to Deploy->UserProvisioning and verifywhether user is able to viewrespective error messageindication while creatingJapanese User ID withspecial characters throughUser Provisioning page

Error messageindication whilecreating JapaneseUser IDwith specialcharacters throughCPC Provisioning


PassedGo to Deploy->UserProvisioning and verifywhether user is able to viewrespective error messageindication while creatingEnglish User IDwith specialcharacters through UserProvisioning page

Error messageindication whilecreating EnglishUser IDwith specialcharacters throughCPC Provisioning




PassedGo to Deploy->UserProvisioning and verifywhether user is able toprovision End Point linewith newly added Companykeyword and it should bedisplayed at Cisco UnifiedCommunications ManagerWeb GUI

Provision End Pointline with newlyadded CompanyKeyword throughCPC Provisioning


PassedGo to Deploy->UserProvisioning and verifywhether user is able toprovision End Point linewith newly added Midnamekeyword and it should bedisplayed at Cisco UnifiedCommunications ManagerWeb GUI

Provision End Pointline with newlyadded MidnameKeyword throughCPC Provisioning


PassedGo to Deploy->UserProvisioning and verifywhether user is able toprovision End Point linewith newly addedDepartment keyword and itshould be displayed at CiscoUnified CommunicationsManager Web GUI

Provision End Pointline with newlyadded DepartmentKeyword throughCPC Provisioning


PassedGo to Deploy->UserProvisioning and verifywhether user is able toprovision End Point linewith newly added Emailkeyword and it should bedisplayed at Cisco UnifiedCommunications ManagerWeb GUI

Provision End Pointline with newlyadded EmailKeyword throughCPC Provisioning


PassedGo to Deploy->UserProvisioning and verifywhether user is able toprovision End Point linewith newly added EmployeeID keyword and it should bedisplayed at Cisco UnifiedCommunications ManagerWeb GUI

Provision End Pointline with newlyadded Employee IDKeyword throughCPC Provisioning




PassedGo to Deploy->UserProvisioning and verifywhether user is able toprovision End Point linewith newly added Managerkeyword and it should bedisplayed at Cisco UnifiedCommunications ManagerWeb GUI

Provision End Pointline with newlyadded ManagerKeyword throughCPC Provisioning


PassedGo to Deploy->UserProvisioning and verifywhether user is able toprovision End Point linewith newly added Countrykeyword and it should bedisplayed at Cisco UnifiedCommunications ManagerWeb GUI

Provision End Pointline with newlyadded CountryKeyword throughCPC Provisioning


PassedGo to Deploy->UserProvisioning and verifywhether user is able toprovision End Point linewith newly added Titlekeyword and it should bedisplayed at Cisco UnifiedCommunications ManagerWeb GUI

Provision End Pointline with newlyadded TitleKeyword throughCPC Provisioning


PassedGo to Deploy->UserProvisioning and verifywhether user is able toprovision End Point linewith newly added Citykeyword and it should bedisplayed at Cisco UnifiedCommunications ManagerWeb GUI

Provision End Pointline with newlyadded CityKeyword throughCPC Provisioning


PassedGo to Deploy->UserProvisioning and verifywhether user is able toprovision End Point linewith newly added Statekeyword and it should bedisplayed at Cisco UnifiedCommunications ManagerWeb GUI

Provision End Pointline with newlyadded StateKeyword throughCPC Provisioning




PassedGo to Deploy->UserProvisioning and verifywhether user is able toprovision End Point linewith newly added CorporateMail keyword and it shouldbe displayed at CiscoUnified CommunicationsManager Web GUI

Provision End Pointline with newlyadded CorporateMail Keywordthrough CPCProvisioning


PassedGo to Deploy->UserProvisioning and verifywhether end user is able tomove the User ID from oneService Area to anotherService Area through UserProvisioning page

Move English UserID from one ServiceArea to anotherService Areathrough UserProvisioning page


PassedGo to Deploy->UserProvisioning and verifywhether end user is able tomove the Japanese User IDfrom one Service Area toanother Service Areathrough User Provisioningpage

Move JapaneseUserID from one ServiceArea to anotherService Areathrough UserProvisioning page


PassedGo to Deploy->UserProvisioning and verifywhether end user is able tomove bulk English usersfrom one Service Area toanother Service Areathrough User Provisioningpage

Move bulk Englishusers from oneService Area toanother ServiceArea through UserProvisioning page


PassedGo to Deploy->UserProvisioning and verifywhether end user is able tomove bulk Japanese usersfrom one Service Area toanother Service Areathrough User Provisioningpage

Move bulk Japaneseusers from oneService Area toanother ServiceArea through UserProvisioning page


PassedGo to Deploy->UserProvisioning and verifywhether end user is able tomove English User ID fromone Domain to anotherDomain through UserProvisioning page

Move English UserID from oneDomain to anotherDomain throughUser Provisioningpage




PassedGo to Deploy->UserProvisioning and verifywhether end user is able tomove Japanese user ID fromone Domain to anotherDomain through UserProvisioning page

Move JapaneseUserID from oneDomain to anotherDomain throughUser Provisioningpage


PassedGo to Deploy->UserProvisioning and verifywhether end user is able tomove bulk English usersfrom one Domain to anotherDomain through UserProvisioning page

Move bulk Englishusers from oneDomain to anotherDomain throughUser Provisioningpage


PassedGo to Deploy->UserProvisioning and verifywhether end user is able tomove bulk Japanese usersfrom one Domain to anotherDomain through UserProvisioning page

Move bulk Japaneseusers from oneDomain to anotherDomain throughUser Provisioningpage


PassedGo to Deploy->UserProvisioning and verifywhether end user is able toview the status whilemoving English user IDfrom one Service Area toanother Service Areathrough User Provisioningpage

Status whilemovingEnglish User IDfrom one ServiceArea to anotherService Areathrough UserProvisioning page


PassedGo to Deploy->UserProvisioning and verifywhether end user is able toview the status whilemoving Japanese user IDfrom one Service Area toanother Service Areathrough User Provisioningpage

Status whilemovingJapanese User IDfrom one ServiceArea to anotherService Areathrough UserProvisioning page


PassedGo to Deploy->UserProvisioning and verifywhether end user is able toview the status whilemoving English user IDfrom one Domain to anotherDomain through UserProvisioning page

Status whilemovingEnglish User IDfrom oneDomain toanother Domainthrough UserProvisioning page




PassedGo to Deploy->UserProvisioning and verifywhether end user is able toview the status whilemoving Japanese user IDfrom one Domain to anotherDomain through UserProvisioning page

Status whilemovingJapanese User IDfrom oneDomain toanother Domainthrough UserProvisioning page


PassedGo to Design-> UserProvisioning Setup andverify whether user is ableto create Service Area withrespective Dial Plan and allthe users provisioned to thatService Area are able toutilize respective Dial Plan

Create Service Areawith Dial Planthrough CPCProvisioning


PassedGo toDeploy->ProvisioningInventory-> ManageEndpoints and verifywhether user is able to deleteendpoint assigned with therespective user which isimported fromCiscoUnifiedCommunications Manager

Delete endpointimported fromUnified CM throughCPC Provisioning


PassedGo toDeploy->ProvisioningInventory-> ManageEndpoints and verifywhether end user is able toassign users to open spacedevices imported fromCiscoUnified CommunicationsManager

Assign Users toopen space devicesthrough CPCProvisioning


PassedGo toDeploy->ProvisioningInventory-> ManageEndpoints and verifywhether end user is able todelete bulk number ofendpoints assigned with therespective users which areimported fromCiscoUnifiedCommunications Manager

Delete bulk numberof endpointsimported fromUnified CM throughCPC Provisioning




PassedGo to Design-> GettingStarted Wizard and verifywhether user is able to addCisco UnifiedCommunications Manager10.5.1 and integrate withother UC applications(CiscoUnity Connection, CiscoUnified IM & Presence)through Cisco PrimeCollaboration Provisioning

Add Unified CM10.5.1 and integratewith other UCapplications usingGetting StartedWizard throughCPC Provisioning


PassedGo to Design-> GettingStarted Wizard and verifywhether user is able to addCisco Unity Connection10.5.1 and integrate withother UC applications(CiscoUnified CommunicationsManger, Cisco Unified IM& Presence) through CiscoPrime CollaborationProvisioning

Add Cisco UnityConnection 10.5.1and integrate withother UCapplications usingGetting StartedWizard throughCPC Provisioning


PassedGo to Design-> GettingStarted Wizard and verifywhether user is able to addCisco Unified IM &Presence 10.5.1 andintegrate with other UCapplications(Cisco UnifiedCommunications Manager,Cisco Unity Connection)through Cisco PrimeCollaboration Provisioning

Add Cisco UnifiedIM & Presence10.5.1 and integratewith other UCapplications usingGetting StartedWizard throughCPC Provisioning


Cisco Prime Collaboration AssuranceDefectsStatusDescriptionTitleLogical ID

PassedGo to Operate -> UtilizationMonitor -> ConferencingDevices and verify whetheruser is able to see correct statusof Cisco TelePresence MCU4510 after the successfuldiscovery

Status of MCU4510 underConferencingDevices

UCJ10.6S.CPC-AS.G.001


Test Results SummaryCisco Prime Collaboration Assurance

PassedGo to Operate -> UtilizationMonitor -> ConferencingDevices and verify whetheruser is able to see correct nameof Cisco TelePresence MCU4510 after the successfuldiscovery

Check name ofMCU 4510 underthe ConferencingDevices


PassedGo to Operate -> UtilizationMonitor -> ConferencingDevices and verify whetheruser is able to see the correctIP Address of CiscoTelePresence MCU 4510

Check IP AddressofMCU4510 underthe ConferencingDevices


PassedGo to Operate -> UtilizationMonitor -> ConferencingDevices and verify whetheruser is able to see the correctVideo Ports/ Screen LicenseUsage of an idle CiscoTelePresence MCU 4510

Check Video Ports/Screen LicenseUsage of an idleMCU 4510 underthe ConferencingDevices


PassedGo to Operate -> UtilizationMonitor -> ConferencingDevices and verify whetheruser is able to see the VideoPorts/ Screen License Usageas 1 of total available during aMeet Me conference with asingle participant using CiscoTelePresence MCU 4510

Check Video Ports/Screen LicenseUsage of MCU4510 during a MeetMe conference withone participant


PassedGo to Operate -> UtilizationMonitor -> ConferencingDevices and verify whetheruser is able to see the VideoPorts/ Screen License Usageas 2 of total available during aMeet Me conference with twoparticipants using CiscoTelePresence MCU 4510

Check Video Ports/Screen LicenseUsage of MCU4510 during a MeetMe conference withtwo participants


PassedGo to Operate -> UtilizationMonitor -> ConferencingDevices and verify whetheruser is able to see the VideoPorts/ Screen License Usageas 3 of total available during aMeetMe conferencewith threeparticipants using CiscoTelePresence MCU 4510

Check Video Ports/Screen LicenseUsage of MCU4510 during a MeetMe conference withthree participants




PassedGo to Operate -> UtilizationMonitor -> ConferencingDevices and verify whetheruser is able to see the VideoPorts/ Screen License Usageas 3 of total available duringan ad hoc conference usingCisco TelePresence MCU4510

Check Video Ports/Screen LicenseUsage of MCU4510 during an Adhoc conference


PassedGo to Operate -> UtilizationMonitor -> ConferencingDevices and verify whetheruser is able to see the correcttotal number of ports as 20 forCisco TelePresence MCU4510 licensed for 20 videoports under the Video Ports/Screen License Usage

Check total numberof ports for MCU4510 under VideoPorts/ ScreenLicense Usage


PassedGo to Operate -> UtilizationMonitor -> ConferencingDevices and verify whetheruser is able to see the AudioPorts Used as 1 of totalavailable during a Meet Meconference with a single audioparticipant using CiscoTelePresence MCU 4510

Check Audio PortsUsed byMCU4510during a Meet Meconferencewith oneparticipant


PassedGo to Operate -> UtilizationMonitor -> ConferencingDevices and verify whetheruser is able to see the AudioPorts Used as 2 of totalavailable during a Meet Meconference with two audioparticipants using CiscoTelePresence MCU 4510

Check Audio PortsUsed byMCU4510during a Meet Meconferencewith twoparticipants


PassedGo to Operate -> UtilizationMonitor -> ConferencingDevices and verify whetheruser is able to see the AudioPorts Used as 3 of totalavailable during a Meet Meconference with three audioparticipants using CiscoTelePresence MCU 4510

Check Audio PortsUsed byMCU4510during a Meet Meconference withthree participants




PassedGo to Operate -> UtilizationMonitor -> ConferencingDevices and verify whetheruser is able to launch device360 view for CiscoTelePresence MCU 4510

Launch Device 360view forMCU4510under theConferencingDevices


PassedGo to Operate -> UtilizationMonitor -> ConferencingDevices and verify whetheruser is able to cross launchCisco TelePresence MCU4510 by clicking the IPAddress cross launch link

Cross launch MCU4510 using IPAddress crosslaunch link underthe ConferencingDevices


PassedGo to Operate -> UtilizationMonitor -> ConferencingDevices and verify whetheruser is able to see the correctname of Cisco TelePresenceServer on VM

Check the name ofCisco TelePresenceServer on VMunder theConferencingDevices


PassedGo to Operate -> UtilizationMonitor -> ConferencingDevices and verify whetheruser is able to see the correctIP Address of CiscoTelePresence Server on VM

Check the IPAddress of CiscoTelePresence Serveron VM under theConferencingDevices


PassedGo to Operate -> UtilizationMonitor and verify whetheruser is able to see the correctVideo Ports/ Screen LicenseUsage of an idle CiscoTelePresence Server on VM

Check Video Ports/Screen LicenseUsage of an idleCisco TelePresenceServer on VMunder theConferencingDevices


PassedGo to Operate -> UtilizationMonitor -> ConferencingDevices and verify whetheruser is able to see the VideoPorts/ Screen License Usageas 1 of total available during aMeet Me conference with asingle participant using CiscoTelePresence Server on VM

Check Video Ports/Screen LicenseUsage of CiscoTelePresence Serveron VM during aMeet Meconferencewith oneparticipant




PassedGo to Operate -> UtilizationMonitor -> ConferencingDevices and verify whetheruser is able to see the VideoPorts/ Screen License Usageas 2 of total available during aMeet Me conference with twoparticipants using CiscoTelePresence Server on VM

Check Video Ports/Screen LicenseUsage of CiscoTelePresence Serveron VM during aMeet Meconferencewith twoparticipants


PassedGo to Operate -> UtilizationMonitor -> ConferencingDevices and verify whetheruser is able to see the VideoPorts/ Screen License Usageas 3 of total available during aMeetMe conferencewith threeparticipants using CiscoTelePresence Server on VM

Check Video Ports/Screen LicenseUsage of CiscoTelePresence Serveron VM during aMeet Meconference withthree participants


PassedGo to Operate -> UtilizationMonitor -> ConferencingDevices and verify whetheruser is able to see the correcttotal number of ports for CiscoTelePresence Server on VMunder the Video Ports/ ScreenLicense Usage

Check the totalnumber of portsunder Video Ports/Screen LicenseUsage for a CiscoTelePresence Serveron VM


PassedGo to Operate -> UtilizationMonitor -> ConferencingDevices and verify whetheruser is able to launch device360 view for CiscoTelePresence Server on VMcorrectly

Launch Device 360view for CiscoTelePresence Serveron VM under theConferencingDevices


PassedGo to Operate -> UtilizationMonitor -> ConferencingDevices and verify whetheruser is able to cross launchCisco TelePresence Server onVMby clicking the IP Addresscross launch link

Cross launch CiscoTelePresence Serveron VM using IPAddress crosslaunch link underthe ConferencingDevices


PassedGo to Home -> Log CollectionCenter and verify whether useris able see CUC as predefinedgroup successfully

Check CUC aspredefined groupunder log collectioncenter




PassedGo to Home -> Log CollectionCenter and verify whether useris able see CUCM aspredefined group successfully

Check CUCM aspredefined groupunder log collectioncenter


PassedGo to Home -> Log CollectionCenter and verify whether useris able see IM & Presence aspredefined group successfully

Check IM &Presence aspredefined groupunder log collectioncenter


PassedGo to Home -> Log CollectionCenter and verify whether useris able to add CUCsuccessfully

Add CUC under logcollection center


PassedGo to Home -> Log CollectionCenter and verify whether useris able to delete CUCsuccessfully

Delete CUC underlog collection center


PassedGo to Home -> Log CollectionCenter and verify whether useris able to edit Time Zone forCUC successfully

Edit Time Zone forCUC under logcollection center


PassedGo to Home -> Log CollectionCenter and verify whether useris able to add IM and Presencesuccessfully

Add IM andPresence under logcollection center


PassedGo to Home -> Log CollectionCenter and verify whether useris able to delete IM andPresence successfully

Delete IM andPresence under logcollection center


PassedGo to Home -> Log CollectionCenter and verify whether useris able to edit Time Zone forIM and Presence successfully

Edit Time Zone forIM and Presenceunder log collectioncenter


PassedVerify whether user can enablethe Auto Refresh for theOpsView dashlet on the HomePage of the Cisco PrimeCollaboration Assurance

Enable AutoRefresh forOpsView dashlet


PassedVerify whether user can disblethe Auto Refresh for theOpsView dashlet on the HomePage of the Cisco PrimeCollaboration Assurance

Disable AutoRefresh forOpsView dashlet




PassedGo to Operate -> DeviceWorkCenter and verify whether usercan enable Auto-Refreshsuccessfully

Enable AutoRefresh on theDWC page


PassedGo to Operate -> DeviceWorkCenter and verify whether usercan disable Auto-Refreshsuccessfully

Disable AutoRefresh on theDWC page


PassedGo to Operate -> Alarms andEvents and verify whether usercan enable Auto-Refreshsuccessfully

EnableAuto-Refresh on theAlarms and Eventpage


PassedGo to Operate -> Alarms andEvents and verify whether usercan disable Auto-Refreshsuccessfully

DisableAuto-Refresh on theAlarms and Eventpage


PassedGo to Operate -> EndpointDiagnostics and verify whetheruser can enable Auto-Refreshsuccessfully

EnableAuto-Refresh on theEndpointDiagnostics page


PassedGo to Operate -> EndpointDiagnostics and verify whetheruser can disable Auto-Refreshsuccessfully

DisableAuto-Refresh on theEndpointDiagnostics page


PassedGo to Report -> InteractiveReports -> UCM/CME VoiceCall Quality Reports -> CDRand verify whether user is ableto get the incoming protocoltype in the CDR report

Check Incomingprotocol type inCDR report


PassedGo to Report -> InteractiveReports -> UCM/CME VoiceCall Quality Reports -> CDRand verify whether user is ableto get the Outgoing protocoltype in the CDR report

Check Outgoingprotocol type inCDR report


PassedGo to Home -> Performanceand verify whether user is ableto get the new improveddashboard for UCM clusters

New improvedcustom dashboardfor UCM clustersunder performancemonitor




PassedGo to Operate -> DeviceWorkCenter and verify whether useris able to launch thePerformanceMonitor page forCisco UnifiedCommunications Managerfrom the 360 view page underthe Device Work Center

LaunchPerformanceMonitor page forUnified CM from360 view


PassedGo to Operate -> DeviceWorkCenter and verify whether useris able to get the MaximizedDevice 360 view for Audio IPPhones

Maximized Device360 view for AudioIP Phones


PassedGo to Operate -> DeviceWorkCenter and verify whether useris able to get the MaximizedDevice 360 view for CiscoJabber group

Maximized Device360 view for CiscoJabber group


PassedGo to Operate -> DeviceWorkCenter and verify whether useris able to get the MaximizedDevice 360 view for Desktopvideo group

Maximized Device360 view forDesktop Videogroup


PassedGo to Operate -> DeviceWorkCenter and verify whether useris able to get the MaximizedDevice 360 view for HardEndpoints

Maximized Device360 view for HardEndpoints


PassedGo to Operate -> DeviceWorkCenter and verify whether useris able to get the MaximizedDevice 360 view for MassEndpoints

Maximized Device360 view for MassEndpoints


PassedGo to Operate -> DeviceWorkCenter and verify whether useris able to get the MaximizedDevice 360 view for MobileEndpoints

Maximized Device360 view forMobile Endpoints


PassedGo to Operate -> DeviceWorkCenter and verify whether useris able to get the MaximizedDevice 360 view for SoftClients

Maximized Device360 view for Softclients




PassedGo to Operate -> DeviceWorkCenter and verify whether useris able to get the MaximizedDevice 360 view for UnknownDevices

Maximized Device360 view forUnknown Devices


PassedGo to Operate -> DeviceWorkCenter and verify whether useris able to get the MaximizedDevice 360 view for 3rd partydevices

Maximized Device360 view for 3rdparty devices


PassedGo to Operate -> DeviceWorkCenter and verify whether useris able to get the MaximizedDevice 360 view forGatekeepers

Maximized Device360 view forGatekeepers


PassedGo to Operate -> DeviceWorkCenter and verify whether useris able to get the MaximizedDevice 360 view for UCApplications

Maximized Device360 view for UCApplications


PassedGo to Operate -> DeviceWorkCenter and verify whether useris able to create a profile forCisco TelePresence VideoCommunication ServerExpressway successfully

Create a profile forCisco VCSExpressway


PassedGo to Operate -> DeviceWorkCenter and verify whether useris able to discover CiscoTelePresence VideoCommunication ServerExpressway successfully

Discover CiscoVCSExpressway inCPC Assurance


PassedGo to Operate -> DeviceWorkCenter and verify whether useris able to delete a profile forCisco TelePresence VideoCommunication ServerExpressway successfully

Delete a profile forCisco VCSExpressway


PassedGo to Operate -> DeviceWorkCenter and verify whether useris able to discover GatewayRouter with SNMPv3authentication successfully

Discover GatewayRouter withSNMPv3authentication




PassedGo to Operate -> CallSignaling Analyzer and verifywhether user is able to openCall Ladder Diagram in a newtab successfully

Open Call LadderDiagram in a newtab


PassedVerify whether user is able toget the home page within 5 (+/-3 ) seconds after the successfullogin

Check UI responsetime for Login tothe CPC Assurance


PassedGo to Operate -> DeviceWorkCenter and verify whether useris able to get the Device 360view and its detailed view pagewithin 5 (+/- 3 ) seconds

Check UI responsetime for Device 360view and itsdetailed view


PassedVerify whether user is able tosee the new improved HomePage in the Cisco PrimeCollaboration Assurance 10.6

New improvedHome Page of CPCAssurance


PassedVerify whether user is able toget the Treemap Cluster viewfor the OpsView dashlet on thehome Page of Cisco PrimeCollaboration Assurance

Treemap Clusterview for OpsViewdashlet on HomePage


PassedVerify whether user is able toget the List view for theOpsView dashlet on the homePage of Cisco PrimeCollaboration Assurance

List view forOpsView dashlet onHome Page


PassedVerify whether user isredirected to the detailed pageof cluster after clicking thecluster's box of the OpsViewpage

Navigate to thedetailed page of acluster fromOpsView Page


PassedVerify whether user is able toget all the alarm summary forTelePresence endpoints,Devices and Infrastructureafter selecting the Alarmdashlet on the Home Page

Check Alarmdashlet under theHome Page


PassedGo to Administration ->Certificate Management andverify whether user is able togenerate a new CSRsuccessfully

Generate CSRunder the CertificateManagement page




PassedGo to Administration ->Certificate Management andverify whether user is able todownload the CSRsuccessfully

Download CSRunder the CertificateManagement page


PassedGo to Administration ->Certificate Management andverify whether user is able touse two characters for theCountry Name fieldsuccessfully

Validate CountryName as twocharacters underCertificateManagement


PassedGo to Administration ->Certificate Management andverify whether user is able toget the warning message forusing lower case character inCountry Name fieldsuccessfully

Check warningmessage for lowercase character inCountry Name field


PassedGo to Administration ->Certificate Management andverify whether user is able toget the warning message forentering non-alphabetcharacters for Country Namefield successfully

Check warningmessage fornon-alphabetcharacters inCountry Name field


PassedGo to Administration ->Certificate Management andverify whether user is able toget the warning message asValue Required if anymandatory field is skippedwithout any value

Check ValueRequired warningmessage afterskipping amandatory fieldunder CertificateManagement


PassedGo to Administration ->Certificate Management andverify whether user is able toget the warning message forentering non-alphabetcharacters in State or ProvinceName field successfully

Check warningmessage fornon-alphabetcharacters in Stateor Province Namefield


PassedGo to Administration ->Certificate Management andverify whether user is able toget the warning message forentering non-alphabetcharacters in Locality Namefield successfully

Check warningmessage fornon-alphabetcharacters inLocality Name field




PassedGo to Administration ->Certificate Management andverify whether user is able toget the warning message forentering non-alphabetcharacters in OrganizationName field successfully

Check warningmessage fornon-alphabetcharacters inOrganization Namefield


PassedGo to Administration ->Certificate Management andverify whether user is able toget the warning message forentering non-alphabetcharacters in OrganizationalUnit Name field successfully

Check warningmessage fornon-alphabetcharacters inOrganizational UnitName field


PassedGo to Administration ->Certificate Management andverify whether user is able toget a successful message aftergenerating a CSR

Verify successfulmessage forgenerating a CSR


PassedGo to Operate -> UtilizationMonitor and verify whetheruser is able to get all the TrunkUtilization list under theUtilizationMonitor dashboard

Trunk UtilizationUnder UtilizationMonitor dashboard


Cisco Prime Collaboration AnalyticsDefectsStatusDescriptionTitleLogical ID

PassedGo to Cisco PrimeCollaboration AssuranceWeb-GUI -> Analyze ->Custom Report Generatorthen click New Query Iconand verify whether user isable to generate a new querysuccessfully

Generate NewQuery in CustomReport Generator

UCJ10.6S.CPC-AN.G.001

PassedGo to Cisco PrimeCollaboration AssuranceWeb-GUI -> Analyze ->Custom Report Generatorthen choose cube, dimensions, measures and verifywhether user is able toGenerate Custom Reportsuccessfully

Generate CustomReport by choosingCube , Dimensionand Measures



Test Results SummaryCisco Prime Collaboration Analytics

PassedGo to Cisco PrimeCollaboration AssuranceWeb-GUI -> Analyze ->Custom Report Generatorthen choose the cube,Columns, rows and verifywhether user is able to savequery successfully

Save a query inCustom ReportGenerator


PassedGo to Cisco PrimeCollaboration AssuranceWeb-GUI -> Analyze ->Custom Report Generatorthen click open query iconand verify whether user isable to open an existingquery successfully

Open an existingquery in CustomReport Generator


PassedGo to Cisco PrimeCollaboration AssuranceWeb-GUI -> Analyze ->Custom Report Generatorthen choose the cube,columns, rows, mode asStacked Bar and verifywhether user is able togenerate and export thecustom report in XLS format

Generate customreport and exportthe report in XLSformat


PassedGo to Cisco PrimeCollaboration AssuranceWeb-GUI -> Analyze ->Custom Report Generator->choose the cube, columns,rows then click tags icon andverify whether user is able toadd tags successfully

Add the Tags inCustom ReportGenerator


PassedGo to Cisco PrimeCollaboration AssuranceWeb-GUI -> Analyze ->Custom ReportGenerator->choose the cube,columns, rows then select thetag to be deleted and verifywhether user is able to deletethe added tags successfully

Delete the Tags inCustom ReportGenerator




PassedGo to Cisco PrimeCollaboration AssuranceWeb-GUI -> Analyze ->Custom Report Generatorthen choose the cube,columns, rows and verifywhether user is able todisplay the report in MDXMode

Display the reportin MDX Mode inCustom reportgenerator


PassedGo to Cisco PrimeCollaboration AssuranceWeb-GUI -> Analyze ->Custom ReportGenerator->choose the cube,columns, rows then click onshow explain plan and verifywhether user is able to seethe data in Explain plan

Show explain Planin Custom reportgenerator


PassedGo to Cisco PrimeCollaboration AssuranceWeb-GUI -> Analyze ->Custom Report Generatorthen click on Show MDXicon and verify whether useris able to show the MDXdetails successfully

ShowMDX Icon inCustom reportgenerator


PassedGo to Cisco PrimeCollaboration AssuranceWeb-GUI -> Analyze ->Custom Report Generatorthen click on Toggle SidebarIcon and verify whether useris able to use toggle sidebarsuccessfully

Check Togglesidebar in Customreport generator


PassedGo to Cisco PrimeCollaboration AssuranceWeb-GUI -> Analyze ->Custom Report Generatorthen click on Toggle FieldsIcon and verify whether useris able to use toggle fieldssuccessfully

Check ToggleFields in Customreport generator




PassedGo to Cisco PrimeCollaboration AssuranceWeb-GUI -> Analyze ->Custom Report Generatorthen click on Drill throughon cell Icon and verifywhether user is able togenerate the cell using drillthrough on cell successfully

Check Drill throughon cell in Customreport generator


PassedGo to Cisco PrimeCollaboration AssuranceWeb-GUI -> Analyze ->Custom ReportGenerator->click on ExportDrill through on cell to CSVIcon then select any cell inthe report and verify whetheruser is able to exportdrill-through on cell to CSVformat successfully

Check Export Drillthrough on cell toCSV format inCustom reportgenerator


PassedGo to Cisco PrimeCollaboration AssuranceWeb-GUI -> Analyze ->Conferences then choose theduration and verify whetheruser is able to see theconference statistics data

Check conferencestatistics data bychoosing the timeperiod filter


PassedGo to Cisco PrimeCollaboration AssuranceWeb-GUI -> Analyze ->Conferences then choose thecluster and verify whetheruser is able to see theconference statistics data

Check conferencestatistics data bychoosing cluster


PassedGo to Cisco PrimeCollaboration AssuranceWeb-GUI -> Analyze ->Conferences then choose theconference option as P2P andverify whether user is able tosee the conference statisticsdata

Check conferencestatistics data bychoosing the P2Poption




PassedGo to Cisco PrimeCollaboration AssuranceWeb-GUI -> Analyze ->Conferences then choose theconference option asMultisite and verify whetheruser is able to check theconference statistics data

Check conferencestatistics data bychoosing theMultisite option


PassedGo to Cisco PrimeCollaboration AssuranceWeb-GUI -> Analyze ->CapacityAnalysisDashboardand verify whether user isable to add DSP Utilizationdashlet successfully

Add DSPUtilization dashletin CapacityAnalysis dashboard


PassedGo to Cisco PrimeCollaboration AssuranceWeb-GUI -> Analyze ->Capacity Analysis -> DSPUtilization then choose thefilter as Peak and verifywhether user is able to viewthe Peak utilized datasuccessfully

Check DSPUtilization data bychoosing the filterPeak


PassedGo to Cisco PrimeCollaboration AssuranceWeb-GUI -> Analyze ->Capacity Analysis-> DSPUtilization then click onSchedule Report in DSPUtilization dashlet and verifywhether user is able toschedule the report for DSPUtilization data in CSVFormat

Schedule the reportfor DSP Utilizationdata


PassedGo to Cisco PrimeCollaboration AssuranceWeb-GUI -> Analyze ->Capacity Analysis-> DSPUtilization then click onExport to CSV in DSPUtilization dashlet and verifywhether user is able to exportthe DSP Utilization data inCSV Format

Export DSPUtilization data toCSV format




PassedGo to Cisco PrimeCollaboration AssuranceWeb-GUI -> Analyze ->Capacity Analysis-> DSPUtilization -> DetailedAnalysis Export ->Scheduled Export and verifywhether user is able toSchedule the report in PDFformat

Schedule Export ofDSP Utilizationdata in PDF format


PassedGo to Cisco PrimeCollaboration AssuranceWeb-GUI -> Analyze ->Capacity Analysis-> DSPUtilization -> DetailedAnalysis Export ->Scheduled Export and verifywhether user is able toSchedule the report in CSVformat

Schedule Export ofDSP Utilizationdata in CSV format


PassedGo to Cisco PrimeCollaboration AssuranceWeb-GUI -> Check detailedview of advanced reportingbased on cluster option andverify whether user is able tosee the detailed view ofadvanced reporting basedcluster option

Detailed View ofadvanced reportingbased on cluster


PassedGo to Cisco PrimeCollaboration AssuranceWeb-GUI -> Administration-> Backup and verifywhether user is able to backup the assurance andanalytics data successfully

Backup theassurance andanalytics data


PassedGo to Cisco PrimeCollaboration AssuranceWeb-GUI -> Administration-> Backup Management andRebuilding a server to restorethe data and verify whetheruser is able to restore theassurance and analytics datasuccessfully

Restore theassurance andanalytics data




PassedAfter the installation of CiscoPrime CollaborationAssurance&Analytics verifywhether root access isdisabled by default

Check Root accessis disabled bydefault


PassedGo to Analyze -> UC systemperformance -> CPUutilization then choose thefilter time period, capability,utilization and verify whetheruser is able to see the CPUutilization data

Check CPUUtilization data


PassedGo to Analyze -> UC systemperformance -> CPUutilization-> choose the filtertime period, capability,utilization then click on thePeak/Avg/Min and verifywhether CPUUtilization datais getting sorted fromAscending to Descendingand vice versa

Check the data sortin CPU Utilization


PassedGo to Analyze -> UC systemperformance -> Memoryutilization then choose thefilter time period, capability,utilization and verify whetheruser is able to generate theMemory utilization data

Check MemoryUtilization data


PassedGo to Analyze -> UC systemperformance -> Memoryutilization-> choose the filtertime period, capability,utilization then click on thePeak/Avg/Min randomly tocheck whether MemoryUtilization data is gettingsorted from Ascending toDescending and vice versa

Check the data sortin MemoryUtilization




PassedGo to Analyze ->Technology Adoption ->Deployment Distribution byendpoint model then choosethe filters as time period,status configured and verifywhether user is able to checkthe deployment count ofconfigured endpoints basedon endpoint model

Deployment countof configuredendpoints based onendpoint model


PassedGo to Analyze -> Assetusage -> Least used endpointtypes then choose the filtersas time period, call count perweek and verify whether useris able to generate the list ofleast used endpoints in aparticular period of time

Least usedendpoints based onendpoint types


PassedGo to Analyze -> Assetusage -> Least used endpointtypes then choose the filtersas time period, call count perweek and verify whether useris able to toggle between theChart mode and Grid mode.

Toggle betweenChart mode andGrid mode for thedata extracted fromLeast usedendpoints


PassedGo to Analyze -> CapacityAnalyze -> Trunk utilizationthen choose the filters as timeperiod, average, utilizationand verify whether user isable to generate trunkutilization data

Check TrunkUtilization data


PassedGo to Analyze -> CapacityAnalyze -> Trunk utilizationthen choose the filters as timeperiod, peak, utilization thenclick on Export to CSV andCheck whether user is ableto export the trunk utilizationdata to CSV

Export the Trunkutilization data toCSV


PassedGo to Analyze -> CapacityAnalysis -> Conferencingdevices video utilization thenchoose the filters as timeperiod, utilization and verifywhether user is able togenerate the video utilizationof conferencing devices

Check videoutilization of theconferencingdevices




PassedGo to Analyze -> CapacityAnalysis -> Conferencingdevices video utilization->choose the filters as timeperiod, utilization then clickon Schedule report and verifywhether user is able togenerate schedule report

Schedule report ofvideo utilization forconferencingdevices


PassedGo to Analyze -> CapacityAnalysis -> Conferencingdevices video utilization->choose the filters as timeperiod utilization then clickon Export to CSV and verifywhether user is able togenerate CSV file of Videoutilization by conferencingdevices

Export the CSV fileof video utilizationfor conferencingdevices


PassedGo to Analyze -> UC Systemperformance -> CPUUtilization->choose thefilters as time period,capability and utilization thenclick on Export to CSV andverify whether user is able togenerate CSV file of CPUUtilization

Export the CSV fileof CPU Utilization


PassedGo to Analyze -> UC Systemperformance -> CPUUtilization->choose thefilters as time period,capability and utilization thenclick on Schedule Report andverify whether user is able togenerate schedule report

Schedule report ofCPU Utilization


PassedGo to Analyze -> UC Systemperformance -> MemoryUtilization->choose thefilters as time period,capability, utilization thenclick on Schedule Report andverify whether user is able togenerate schedule report

Schedule report ofMemory Utilization




PassedGo to Analyze -> UC Systemperformance -> CPUUtilization -> choose thefilters as capability,utilization then click on Seedetails and verify whetheruser is able to view the CPUutilization in detailed view

Detailed view ofCPU Utilization


PassedGo to Analyze -> UC Systemperformance -> MemoryUtilization -> choose thefilters as capability,utilization then click on Seedetails and verify whetheruser is able to view the CPUutilization in detailed view

Detailed view ofMemory Utilization


PassedGo to Analyze ->TechnologyAdoption -> CallDistribution by endpointmodel then choose the filtersas time period, calldistribution and verifywhether user is able to checkcall distribution based on callvolume per endpoint model

Check Calldistribution basedon call volume perendpoint model


PassedGo to Analyze -> ServiceExperience -> ServiceExperience Distribution->choose the filters as timeperiod, Call type ,quality asgraded calls and verifywhether user is able generatethe percentage distribution ofcalls based on good callquality

Service ExperienceDistribution basedon good call quality


PassedGo to Analyze -> ServiceExperience -> ServiceExperience Distribution andchoose the filters as timeperiod, Call type, quality asGraded and ungraded callsand verify whether user isable to generate thepercentage distribution ofcalls based on all quality

Service ExperienceDistribution basedon all call types




PassedGo to Analyze -> CapacityAnalysis -> Busy HourTrunk Capacity then choosethe filters as time period, AllTrunks and verify whetheruser is able to generate thetrunk or route group data thathave minimal traffic

Generate trunk orroute groups datahaving minimaltraffic


Cisco Unified Communication System Upgrade / Migration Test

Upgrade PathsCUP(Upgrade)CUC(Upgrade)CUCM(PCD)6.1(5)

8.6(1) UCS - L28.5(1) UCS - L26.1(5) (MCS)Base Release

8.6(3) - PCD8.6(2) - PCD-Interim Release

-9.X - L26.1(5) (MCS)Migration

10.5(2)10.5(2)10.5(2) (UCS)Target release

CUP(Upgrade)CUC(Upgrade)CUCM(PCD)7.1(5)




10.5(2)10.5(2)10.5(2) (UCS)Target Release







8.6(3) UCS - PCD8.6(1) (UCS) - PCD8.6(2) (UCS)Base Release


Test Results SummaryCisco Unified Communication System Upgrade / Migration Test


-9.x - L2-Interim Release



9.1(1) UCS - PCD9.1(2) (UCS)-L29.1(2) (UCS)Base Release

10.5(2)10.5(2) (UCS)10.5(2) (UCS)Target Release


10.5(1) UCS - PCD10.5(1) (UCS) - PCD10.5(1) (UCS)Base Release

10.5(2)10.5(2) (UCS)10.5(2) (UCS)Target Release

Note: Before Upgrading CUCM/CUC from 9.1.2 to 10.5.2, we need to install the copfile(ciscocm.version3-keys.cop.sgn).

Before upgrading CUC from 8.5.1 to 8.6.2, We need to install the COP file(ciscocm.refresh_upgrade_v1.3.cop.sgn)

COP-File download link:

http://software.cisco.com/download/release.html?mdfid=283782839&reltype=all&relind=AVAILABLE&release=COP-Files&softwareid=282204704&sortparam=2

COP-File installation Procedure:

The COP-File installation steps as follows.

• Put the COP file on an FTP or SFTP server that the server that you are upgrading can access.

• Log in to Cisco Unified Communications Operating System Administration.

• Navigate to Software Upgrades > Install/Upgrade. The Software Installation/Upgrade window displays.

• From the Source list, choose Remote File system.

• In the Directory field, enter the path to the directory that contains the patch file on the remote system.If the upgrade file is located on a Linux or Unix server, you must enter a forward slash (/) at the beginningof the directory path. For example, if the upgrade file is in the patches directory, you must enter /patches. If the upgrade file is located on a Windows server, remember that you are connecting to an FTP orSFTP server, so use the appropriate syntax. Begin the path with a forward slash and use forward slashesthroughout the path. The path must start from the FTP or SFTP root directory on the server, so youcannot enter a Windows absolute path, which starts with a drive letter (for example, C:).

• In the Server field, enter the server name or IP address.

• In the User Name field, enter the user name on the remote server.

• In the User Password field, enter the password on the remote server.


Test Results SummaryUpgrade Paths



• Select the transfer protocol from the Transfer Protocol field.

• To use the Email Notification feature, enter your Email Destination and SMTP Server in the fieldsprovided.

• To continue the upgrade process, click Next.

• Choose the upgrade version that you want to install and click Next.

• In the next window, monitor the progress of the download.

• If you want to install the upgrade and automatically reboot to the upgraded software, choose Switch tonew version after upgrade. The system restarts and runs the upgraded software.

• If you want to install the upgrade and then manually switch to the upgraded software at a later time,choose Do not switch to new version after upgrade. Click Next.

•When the installation completes, click Finish (not applicable for Refresh Upgrades).

• To restart the system and activate the upgrade, choose Settings > Version then click Switch Version.The system restarts running the upgraded software (not applicable for Refresh Upgrades).

Upgrade 6.1.5 to 10.5.2Upgrade 6.1.5 to 10.5.2

Target Release SetMigration ReleaseSet

Intermediate ReleaseSet1

Base ReleaseProduct /Component

10.5.2.99832-3NILNIL6.1.5.10000-10CUCM

10.5.2.9903-120(JP)NILNIL6.1.3.3000-1(JP)CUCM Locale

10.5.2.99832-39.1.2.10000-288.6.2.10000-308.5.1.10000-26CUC

10.5.2.1-1(JP)9.1.2.1-10(JP)8.6.2.1-69(JP)8.5.1.1-92(JP)CUC Locale

10.5.1.98020-2NIL8.6.3.10000-208.6.1.10000-34CUP

10.5.1.1000-1(JP)8.6.3.1000-1(JP)8.6.1.1000-1(JP)CUP locale

10.08.58.54.0(2)SRST

NIL15.1(3)T15.1(3)T12.4(15)T4Voice GatewayIOS

NIL7.0(6)7.0(6)2.1(4)IP Communicator

NIL8.5(6)8.5(6)1.2(4)Unified PersonalCommunicator

10.5.0NILNILNILJabber for Mac

10.5.0NILNILNILJabber for iPhone

10.5.0NILNILNILJabber iPad

10.5.0NILNILNILJabber for Android


Test Results SummaryUpgrade 6.1.5 to 10.5.2

Upgrade 6.1.5 to 10.5.2



Base ReleaseProduct /Component

10.5.0NILNILNILJabber forWindows

DefectsStatusDescriptionTitleLogical ID

PassedVerify whether Installation ofUnified CM 6.1(5) Publisheron MCS is completedsuccessfully

Installation of UnifiedCM 6.1(5) Publisher onMCS

UC1052S.UPGRADE.U.001

PassedVerify whether Installation ofUnified CM 6.1(5) Subscriberon MCS is completedsuccessfully

Installation of UnifiedCM6.1(5) Subscriber onMCS


PassedVerify whether Installation ofCisco Unity Connection 8.5(1)Publisher on UCS is completedsuccessfully

Installation of CiscoUnity Connection 8.5(1)Publisher on UCS


PassedVerify whether Installation ofCisco Unity Connection 8.5(1)Subscriber on UCS iscompleted successfully

Installation of CiscoUnity Connection 8.5(1)Subscriber on UCS


PassedVerify whether Installation ofCisco Unified Presence 8.6(1)Publisher is completed onUCSsuccessfully

Installation of CiscoUnified Presence 8.6(1)Publisher on UCS


PassedVerify whether Installation ofCisco Unified Presence 8.6(1)Subscriber is completed onUCS successfully

Installation of CiscoUnified Presence 8.6(1)Subscriber on UCS


PassedVerify the Japanese localeinstalled successfully intoUnified CM Publisher

Install Japanese localeinto Unified CM 6.1(5)Publisher


PassedVerify whether the Unified CMintegration with ActiveDirectory is successful

Integrate the UnifiedCM with ActiveDirectory


PassedVerify whether end user can becreated in the Unified CM6.1(5) successfully

Create end user in theUnified CM 6.1(5)




PassedVerify whether SCCP/SIP IPPhones can be registered withUnified CM6.1(5) successfully

IP Phones should beregistered with UnifiedCM 6.1(5)


PassedVerify whether SIP Trunk canbe created in the Unified CM6.1(5) successfully

Create SIP Trunk tointerop Site in theUnified CM 6.1(5)Publisher


PassedVerify whether ICT Trunk canbe created in the Unified CM6.1(5) successfully

Create ICT Trunk tointerop Site in theUnified CM 6.1(5)Publisher


PassedVerify whether Gateway can beregistered in Unified CM from6.1(5) Publisher successfully

Register the H.323Gateway in the UnifiedCM 6.1(5) Publisher


CSCur58310FailedVerify whether migration fromUnified CM 6.1(5) Publisher toUnified CM 10.5(2) via PrimeCollaboration Deployment issuccessful

Migrate from UnifiedCM 6.1(5) Publisher toUnified CM 10.5(2) viaPrime CollaborationDeployment





Base ReleaseProduct / Component

10.5.2.99832-3NILNIL7.1.5.10000-12CUCM


10.5.2.99832-39.1.2.10000-288.6.2.10000-308.5.1.10000-26CUC


10.5.1.98020-2NIL8.6.3.10000-208.6.1.10000-34CUP


10.08.58.58SRST

NIL15.1(3)T15.1(3)T15.0(1)MVoice Gateway IOS

NIL7.0.67.0.67.0.6IP Communicator






Upgrade 7.1.5 to 10.5.2






10.5.0NILNILNILJabber for Windows


PassedVerify whether Installation ofUnified CM 7.1(5) Publisher iscompleted on MCS successfully



PassedVerify whether Installation ofUnified CM 7.1(5) Subscriber iscompleted on MCS successfully

Installation of UnifiedCM 7.1(5) Subscriberon MCS


PassedVerify whether Installation ofCisco Unity Connection 8.5(1)Publisher is completed on UCSsuccessfully

Installation of CiscoUnity Connection8.5(1) Publisher onUCS


PassedVerify whether Installation ofCisco Unity Connection 8.5(1)Subscriber is completed on UCSsuccessfully

Installation of CiscoUnity Connection8.5(1) Subscriber onUCS


PassedVerify whether Installation ofCisco Unified Presence 8.6(1)Publisher is completed on UCSsuccessfully



PassedVerify whether Installation ofCisco Unified Presence 8.6(1)Subscriber is completed on UCSsuccessfully



PassedVerify whether the Japaneselocale is installed successfullyinto Unified CM Publisher



PassedVerify whether SCCP/SIP IPPhones can be registered withUnified CM 7.1(5)



PassedVerify whether SIP Trunk can becreated in the Unified CM 7.1(5)successfully

Create SIP Trunk tointerop site in theUnified CM 7.1(5)Publisher




PassedVerify whether ICT Trunk canbe created in the Unified CM7.1(5) successfully

Create ICT Trunk tointerop site in theUnified CM 7.1(5)Publisher


PassedVerify whether H.323 Gatewaycan be registered in the UnifiedCM from 7.1(5) Publishersuccessfully

Register the H.323Gateway in the UnifiedCM 7.1(5) Publisher


PassedVerify whether MGCP Gatewaycan be registered in the UnifiedCM from 7.1(5) Publishersuccessfully

Register the MGCPGateway in the UnifiedCM 7.1(5) Publisher




IntermediateRelease Set1


10.5.2.99832-3NILNIL8.5.1.10000-26CUCM


10.5.2.99832-39.1.2.10000-288.6.2.10000-308.5.1.10000-26CUC


10.5.1.98020-2NIL8.6.3.10000-208.6.1.10000-34CUP


10.08.58.58SRST

NIL15.1(3)T15.1(3)T15.0(1)MVoice Gateway IOS

NIL7.0.67.0.67.0.6IP Communicator






10.5.0NILNILNILJabber for Windows




PassedVerify whether Installation ofUnified CM 8.5(1) Publisher iscompleted on MCS successfully



PassedVerify whether Installation ofUnified CM 8.5(1) Subscriber iscompleted on MCS successfully

Installation of UnifiedCM 8.5(1) Subscriber onMCS


PassedVerify whether Installation of CiscoUnity Connection 8.5(1) Publisheris completed on UCS successfully



PassedVerify whether Installation of CiscoUnity Connection 8.5(1) Subscriberis completed on UCS successfully



PassedVerify whether Installation of CiscoUnified Presence 8.6(1) Publisheris completed on UCS successfully



PassedVerify whether Installation of CiscoUnified Presence 8.6(1) Subscriberis completed on UCS successfully



PassedVerify whether the Japanese localeis installed successfully intoUnified CM Publisher



PassedVerify whether voicemail workssuccessfully in the Cisco UnityConnection 8.5(1)

Voicemail should workproperly in the CiscoUnity Connection 8.5(1)


PassedVerify whether voice mailmessages should receive on theCisco IP Communicatorsuccessfully

Voice mail messagesshould receive on theCisco IP Communicator


PassedVerify whether backup can be takenfrom the Unified CM via DisasterRecovery System successfully

Backup should be takenfrom the Unified CM8.5(1)


PassedVerify whether backup can be takenfrom the Cisco Unity Connection8.5(1) Publisher as well asSubscriber successfully

Backup should be takenfrom the Cisco UnityConnection 8.5(1)Publisher as well asSubscriber


PassedVerify whether backup can be takenfrom the Cisco Unified Presence8.6(1) Publisher as well asSubscriber successfully

Backup should be takenfrom the Cisco UnifiedPresence 8.6(1) Publisheras well as Subscriber





Target Release SetIntermediate ReleaseSet1


10.5.2.99832-3NIL8.6.2.10000-30CUCM

10.5.2.9903-120(JP)8.6.2.1000-1(JP)CUCM Locale

10.5.2.99832-39.1.2.10000-288.6.1.10000-43CUC

10.5.2.1-1(JP)9.1.2.1-10(JP)8.6.1.1-2(JP)CUC Locale

10.5.1.98020-2NIL8.6.3.10000-20CUP

10.5.1.1000-1(JP)8.6.3.1000-1(JP)CUP Locale

10.08.6SRST

15.4(1) T15.1(4)M1Voice Gateway IOS

8.6(1)IP Communicator

8.5(1)/Windows,7.1(2)/Mac

Unified PersonalCommunicator

10.5.08.1.5Jabber for Mac


PassedVerify whether Installation ofUnified CM 8.6(2) Publisher onUCS is successful

Installation of UnifiedCM 8.6(2) Publisher onUCS


PassedVerify whether Installation ofUnified CM 8.6(2) Subscriberon UCS is successful

Installation of UnifiedCM 8.6(2) Subscriberon UCS


PassedVerify whether Installation ofCisco Unity Connection 8.6(1)Publisher on UCS is successful



PassedVerify whether Installation ofCisco Unity Connection 8.6(1)Subscriber on UCS is successful



PassedVerify whether Installation ofCisco Unified Presence 8.6(3)Publisher on UCS is successful



PassedVerify whether Installation ofCisco Unified Presence 8.6(3)Subscriber on UCS is successful





PassedVerify whether the Japaneselocale is installed into UnifiedCM 8.6(2) Publishersuccessfully



PassedVerify whether basic call can bemade between the IP Phones inUnified CM 8.6(2)

Basic call can be madein the Unified CM8.6(2)


PassedVerify whether interoperabilitycall can be made in the UnifiedCM 8.6(2) successfully

Make aninteroperability call inthe Unified CM 8.6(2)


PassedVerify whether PersonalDirectory Service is successfulin Unified CM 8.6(2)

Personal DirectoryService in the UnifiedCM 8.6(2)


PassedVerify whether Fast Dial Serviceis working in Unified CM8.6(2)successfully

Fast Dial Service in theUnified CM 8.6(2)


PassedVerify whether migration fromUnified CM 8.6(2) Publisher toUnified CM 10.5(2) via PrimeCollaboration Deployment issuccessful



PassedVerify whether Upgrade ofCisco Unity ConnectionPublisher from 9.1(2) to 10.5(2)is successful

Upgrade the CiscoUnity ConnectionPublisher from 9.1(2) to10.5(2)


PassedVerify whether Upgrade ofCisco Unified PresencePublisher from 8.6(3) to 10.5(2)via PCD is successful

Upgrade the CiscoUnified PresencePublisher from 8.6(3) to10.5(2) via PrimeCollaborationDeployment


PassedVerify whether the Japaneselocale is installed successfullyinto Unified CM 10.5(2)Publisher

Install Japanese localeinto Unified CM10.5(2) Publisher


PassedVerify the Email Notification forScheduled/Completed tasks inPCD

Checking the EmailNotification ofScheduled/Completedtasks in PCD

UC1052.UPGRADE.U.318

PassedVerify the Email Notification forthe Error/Cancel tasks in PCD

Checking the EmailNotification ofError/Cancel tasks inPCD

UC1052.UPGRADE.U.319




Target Release SetIntermediate ReleaseSet1


10.5.2.99832-3NIL9.1.2.10000-28CUCM

10.5.2.9903-120(JP)9.1.2.1000-1(JP)CUCM Locale

10.5.2.99832-3NIL9.1.2.10000-28CUC

10.5.2.1-1(JP)9.1.2.1-10(JP)CUC Locale

10.5.1.98020-2NIL9.1.1.10000-8CUP

10.5.1.1000-1(JP)9.1.1.1000-1(JP)CUP Locale

10.09.0.1SRST

15.4(1) T15.2(4)MVoice Gateway IOS

10.5.09.0.1Jabber for Mac

10.5.09Jabber for iPhone

10.5.01.1Jabber for iPad

10.5.09.0.1Jabber for Android

10.5.09.0.1Jabber for Windows


PassedVerify whether Installation ofUnified CM Publisher 9.1(2) onUCS is successful

Installation of UnifiedCM Publisher 9.1(2)on UCS


PassedVerify whether Installation of CiscoUnity Connection Publisher 9.1(2)on UCS is successful

Installation of CiscoUnity ConnectionPublisher 9.1(2) onUCS


PassedVerify whether Installation of CiscoUnified Presence Publisher 9.1(1)on UCS is successful

Installation of CiscoUnified PresencePublisher 9.1(1) onUCS


PassedVerify whether the Japanese localeinstalled successfully into UnifiedCM Publisher

Install Japanese localeinto Unified CMPublisher 9.1(2)




PassedVerify whetherMGCPGateway canbe registered in Unified CM 9.1(2)Publisher successfully

Register MGCPGateway in UnifiedCM 9.1(2) Publisher


PassedVerify whether voicemail worksproperly in the Cisco UnityConnection 9.1(2)

Voicemail shouldwork properly in theCisco UnityConnection 9.1(2)


PassedVerify whether backup can be takenfrom Unified CM via DisasterRecovery System successfully

Backup should betaken from UnifiedCM 9.1(2)


PassedVerify whether migration fromUnified CM 9.1(2) Publisher toUnified CM 10.5(2) via PrimeCollaboration Deploymentsuccessfully

Migrate from UnifiedCM 9.1(2) Publisherto Unified CM 10.5(2)via PrimeCollaborationDeployment


PassedVerify whether Upgrade of CiscoUnity Connection Publisher from9.1(2) to 10.5(2) is successful

Upgrade the CiscoUnity ConnectionPublisher from 9.1(2)to 10.5(2)


PassedVerify whether Upgrade of CiscoUnified Presence Publisher from9.1(1) to 10.5(2) via PCD issuccessful

Upgrade the CiscoUnified PresencePublisher from 9.1(1)to 10.5(2) via PCD


PassedVerify whether the Japanese localeinstalled successfully into UnifiedCM 10.5(2) Publisher

Install Japanese localeinto Unified CM10.5(2) Publisher


PassedVerify whether LDAP synchronizeduser is present in the Unified CMafter migration has been donesuccessfully

LDAP synchronizeduser should be in theUnified CM aftermigration has done


PassedVerify whether SCCP/SIP IP Phonescan be registered with Unified CMafter migration has been donesuccessfully

IP Phones should beregistered withUnified CM aftermigration has done


PassedVerify the H.323 GatewayRegistration after the migration ofUnified CM from 9.1(2) to 10.5(2)successfully

H.323 GatewayRegistration statusafter migration hasdone


PassedVerify the MGCP GatewayRegistration after the migration ofUnified CM from 9.1(2) to 10.5(2)successfully

MGCP GatewayRegistration statusafter migration hasdone




PassedVerify whether SIP Trunk should bereplicated in the Unified CM aftermigration has been donesuccessfully

SIP Trunk should bereplicated in UnifiedCM after migrationhas done


PassedVerify whether Fast Dial Service issuccessful after migration of UnifiedCM from 9.1(2) to 10.5(2)

Fast Dial Service aftermigrating the UnifiedCM from 9.1(2) to10.5(2)


PassedVerify whether Voice mail worksproperly after upgrading the CiscoUnity Connection from 9.1(2) to10.5(2) successfully

Voice mail shouldwork after upgradingthe Cisco UnityConnection from9.1(2) to 10.5(2)


PassedVerify whether Instant Messagingon Jabber forWindowsworking fineafter upgrade from 9.1(1) to 10.5(2)successfully

Check the InstantMessaging on Jabberfor Windows afterupgrade from 9.1(1) to10.5(2)


PassedVerify whether basic call on Jabberfor Windows working fine afterupgrade from 9.1(1) to 10.5(2)successfully

Make a basic call onJabber for Windowsafter upgrade from9.1.(1) to 10.5(2)



Target Release SetIntermediate Release Set1Base ReleaseProduct / Component

10.5.2.99832-3NIL10.5.1.10000-7CUCM

10.5.2.9903-120(JP)10.5.1.1000-1(JP)CUCM Locale

10.5.2.99832-3NIL10.5.1.10000-7CUC

10.5.2.1-1(JP)10.5.0.1-1(JP)CUC Locale

10.5.1.98020-2NIL10.5.1.10000-9CUP

10.5.1.1000-1(JP)10.5.1.1000-1(JP)CUP Locale

10.09.0.1SRST

15.4(1) T15.2(4)MVoice Gateway IOS

10.5.010.5Jabber for Mac

10.5.010.5Jabber for iPhone

10.5.01.1Jabber for iPad



Upgrade 10.5.1 to 10.5.2

Target Release SetIntermediate Release Set1Base ReleaseProduct / Component

10.5.010.5Jabber for Android

10.5.010.5Jabber for Windows


PassedVerify whether Installation ofUnified CM Publisher 10.5(1) onUCS is successful

Installation of UnifiedCM Publisher 10.5(1)on UCS


PassedVerify whether Installation ofCisco Unity Connection Publisher10.5(1) on UCS is successful

Installation of CiscoUnity ConnectionPublisher 10.5(1) onUCS


PassedVerify whether Installation ofCisco Unified Presence Publisher10.5(1) on UCS is successful

Installation of CiscoUnified PresencePublisher 10.5(1) onUCS


PassedVerify whether the Japanese localeinstalled successfully into UnifiedCM Publisher

Install Japanese localeinto Unified CMPublisher 10.5(1)


PassedVerify whether SCCP/SIP IPPhones can be registered withUnified CM 10.5(1) successfully



PassedVerify whether SIP Trunk can becreated in the Unified CM 10.5(1)successfully

Create SIP Trunk toInterop site in theUnified CM 10.5(1)Publisher


PassedVerify whether ICT Trunk can becreated in the Unified CM 10.5(1)successfully

Create ICT Trunk toInterop site in theUnified CM 10.5(1)Publisher


PassedVerify whether Gateway can beregistered in the Unified CM10.5(1) Publisher successfully

Register H.323Gatewayin the Unified CM10.5(1) Publisher


PassedVerify whether Voice mailmessages should receive on theCisco Jabber successfully

Voice mail messagesshould receive on theCisco Jabber


PassedVerify whether Instant Messagingon Cisco Jabber is workingsuccessfully

Check the InstantMessaging on CiscoJabber




PassedVerify whether backup can betaken from the Unified CM viaDisaster Recovery Systemsuccessfully

Backup should be takenfrom the Unified CM10.5(1)


PassedVerify whether migration fromUnified CM 10.5(1) Publisher toUnified CM 10.5(2) via PrimeCollaboration Deploymentsuccessfully



PassedVerify whether Upgrade of CiscoUnity Connection Publisher from10.5(1) to 10.5(2) via PCD issuccessful

Upgrade the CiscoUnityConnection Publisherfrom 10.5(1) to 10.5(2)via PCD


PassedVerify whether Upgrade of CiscoUnified Presence Publisher from10.5(1) to 10.5(2) via PCD issuccessful

Upgrade the CiscoUnified PresencePublisher from 10.5(1)to 10.5(2) via PCD


PassedVerify whether the Japanese localeinstalled successfully into UnifiedCM 10.5(2) Publisher

Install Japanese localeinto Unified CM10.5(2)Publisher


PassedVerify whether LDAPsynchronized user is present in theUnified CM after the migration

LDAP synchronizeduser should be in theUnified CM aftermigration


PassedVerify whether SCCP/SIP IPPhones can be registered withUnified CM after the migration

IP Phones should beregistered with UnifiedCM after migration


PassedVerify the Email Notification forScheduled/Completed tasks inPCD

Checking the EmailNotification ofScheduled/Completedtasks in PCD


PassedVerify the Email Notification forthe Error/Cancel tasks in PCD

Checking the EmailNotification ofError/Cancel tasks inPCD


RegressionCisco Unified IP Phone Regression:

Regression Execution - Unified IP Phone Features

Failed %FailedPassed W/X%

PassedW/XPassed %PassedTotal testcases

Featurestested


Test Results SummaryRegression

0%00%0100%99Auto Pickup

0%00%0100%33Barge

0%00%0100%11Call Park

0%00%0100%1515Call Pickup

0%00%0100%33Call Transfer

0%00%0100%11CFWD Busy

0%00%0100%22CFWD NoAnswer

0%00%0100%77CFWD All

0%00%0100%77Conference

0%00%0100%22DND

0%00%0100%22Hold

0%00%0100%1818Hold andResume

0%00%0100%55HoldReversion

0%00%0100%66Make Call

0%00%0100%11Meet-Me

0%00%0100%44Opickup

0%00%0100%1111ParkReversion

0%00%0100%11Privacy onHold

0%00%0100%55Redial

0%00%0100%11Shared Line

0%00%0100%104104Total

Cisco Jabber for Android Regression:

Regression Execution - Cisco Jabber for Android Features

Failed %FailedPassed W/X%

PassedW/X

Passed %PassedTotal testcases

Featurestested

0%00%0100%11AlertingName

0%00%0100%44Make Call


Test Results SummaryRegression

0%00%0100%11Secure Call

0%00%0100%1010User Interface

0%00%0100%1616Total

Related DocumentationCisco IP Phone 8841, 8851, and 8861

User Guide:

http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cuipph/8841_8851_8861/10_5/english/user_guide/P881_BK_U33163AA_00_userguide-8841-8851-8861-10_0.html

Administration Guide:

http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cuipph/8841_8851_8861/10_5/english/admin_guide/P881_BK_AA5170E9_00_adminguide-8841-8851-8861-10_0.html

Release Note:

http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cuipph/8841_8851_8861/firmware/10-2-1/english/ReleaseNotes/P881_BK_R7A58C22_00_rn-10_2_1-8841-8851-8861/P881_BK_R7A58C22_00_rn-10_2_1-8841-8851-8861_chapter_00.html

Cisco Unified Survivable Remote Site Telephony


http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cusrst/admin/sccp_sip_srst/configuration/guide/SCCP_and_SIP_SRST_Admin_Guide/srst_roadmap.html#pgfId-1152146

Cisco ATA 190 Analog Telephone Adapter


http://www.cisco.com/c/dam/en/us/td/docs/voice_ip_comm/cata/190/1_0/english/administration/guide/sip/ATA190_AG.pdf

Release Note:

http://www.cisco.com/c/dam/en/us/td/docs/voice_ip_comm/cata/190/1_0/english/release/notes/ATA190_RN.pdf

Cisco TelePresence Video Communication Server

Installation Guide:

http://www.cisco.com/c/dam/en/us/td/docs/telepresence/infrastructure/vcs/install_guide/Cisco-VCS-Virtual-Machine-Install-Guide-X8-2.pdf

Release Note:

http://www.cisco.com/c/dam/en/us/td/docs/telepresence/infrastructure/vcs/release_note/Cisco-VCS-Release-Note-X8-2-2.pdf


Test Results SummaryRelated Documentation


















Configuration Guide:

http://www.cisco.com/c/dam/en/us/td/docs/telepresence/infrastructure/vcs/config_guide/X8-2/Cisco-VCS-Basic-Configuration-Single-VCS-Control-Deployment-Guide-X8-2.pdf

Collaboration EDGE Configuration Guide:

http://www.cisco.com/c/dam/en/us/td/docs/telepresence/infrastructure/vcs/config_guide/X8-2/Mobile-Remote-Access-via-VCS-Deployment-Guide-X8-2.pdf

Cisco Telepresence Management Suite


http://www.cisco.com/c/dam/en/us/td/docs/telepresence/infrastructure/tms/admin_guide/Cisco-TMS-Admin-Guide-14-5.pdf

Installation Guide:

http://www.cisco.com/c/dam/en/us/td/docs/telepresence/infrastructure/tms/install_guide/Cisco-TMS-install-guide-14-5.pdf

Release Note:

http://www.cisco.com/c/dam/en/us/td/docs/telepresence/infrastructure/tms/release_note/Cisco-TMS-release-notes-14-5.pdf

Cisco TelePresence System 500-32 & Cisco TelePresence TX9000

Release Note:

http://www.cisco.com/c/en/us/td/docs/telepresence/tx_sw/6_0/release/notes/tx_sw_6_0_release_notes.html


http://www.cisco.com/c/en/us/td/docs/telepresence/tx_sw/6_0/admin/guide/tx_6_0_admin_guide.pdf

Cisco TelePresence SX80 Codec


http://www.cisco.com/c/dam/en/us/td/docs/telepresence/endpoint/sx-series/tc7/administration-guide/sx80-administrator-guide-tc72.pdf

Installation Guide:

http://www.cisco.com/c/dam/en/us/td/docs/telepresence/endpoint/sx-series/installation-guide/sx80-installation-sheet.pdf

API Reference Guide:

http://www.cisco.com/c/dam/en/us/td/docs/telepresence/endpoint/sx-series/tc7/api-reference-guide/sx80-api-reference-guide-tc71.pdf

Cisco TelePresence SX20 QuickSet


http://www.cisco.com/c/dam/en/us/td/docs/telepresence/endpoint/quick-set-sx20/tc7/administration-guide/sx20-quickset-administrator-guide-tc72.pdf














http://www.cisco.com/c/en/us/td/docs/telepresence/tx_sw/6_0/release/notes/tx_sw_6_0_release_notes.html

http://www.cisco.com/c/en/us/td/docs/telepresence/tx_sw/6_0/admin/guide/tx_6_0_admin_guide.pdf









http://www.cisco.com/c/dam/en/us/td/docs/telepresence/endpoint/quick-set-sx20/tc7/api-reference-guide/codec-sx20-api-reference-guide-tc72.pdf?mdfid=284091229

Cisco TelePresence SX10 QuickSet



User Guide:

http://www.cisco.com/c/dam/en/us/td/docs/telepresence/endpoint/sx-series/tc7/user-guide/trc6-sx10-user-guide-tc72.pdf

Cisco TelePresence System EX series


http://www.cisco.com/c/dam/en/us/td/docs/telepresence/endpoint/ex-series/tc7/administration-guide/ex-series-administrator-guide-tc72.pdf

Cisco TelePresence System C/SX/EX/MX/Profile Series

Software Release Note TC7:

http://www.cisco.com/c/dam/en/us/td/docs/telepresence/endpoint/software/tc7/release_notes/tc-software-release-notes-tc7.pdf

Getting Started Guide::

http://www.cisco.com/c/dam/en/us/td/docs/telepresence/endpoint/ex-series/tc7/getting-started-guide/video-systems-getting-started-guide-tc72.pdf

Cisco TelePresence System Integrator Package C90


http://www.cisco.com/c/dam/en/us/td/docs/telepresence/endpoint/codec-c-series/tc7/administration-guide/profile-c90-and-codec-c90-administrator-guide-tc72.pdf


http://www.cisco.com/c/dam/en/us/td/docs/telepresence/endpoint/codec-c-series/tc7/api-reference-guide/codec-c90-api-reference-guide-tc72.pdf?mdfid=283688198

Cisco TelePresence MCU


http://www.cisco.com/c/dam/en/us/td/docs/telepresence/infrastructure/mcu/admin_guide/cisco-telepresence-mcu-5300-series-printable-online-help-4-5.pdf

Release Note:

http://www.cisco.com/c/dam/en/us/td/docs/telepresence/infrastructure/mcu/release_note/Cisco-TelePresence-MCU-Software-release-notes-4-5-1-45.pdf

Cisco Telepresence Conductor


http://www.cisco.com/c/dam/en/us/td/docs/telepresence/infrastructure/conductor/admin_guide/TelePresence-Conductor-Admin-Guide-XC2-4.pdf

Installation Guide:






http://www.cisco.com/c/dam/en/us/td/docs/telepresence/endpoint/sx-series/tc7/user-guide/trc6-sx10-user-guide-tc72.pdf

http://www.cisco.com/c/dam/en/us/td/docs/telepresence/endpoint/ex-series/tc7/administration-guide/ex-series-administrator-guide-tc72.pdf

http://www.cisco.com/c/dam/en/us/td/docs/telepresence/endpoint/software/tc7/release_notes/tc-software-release-notes-tc7.pdf

http://www.cisco.com/c/dam/en/us/td/docs/telepresence/endpoint/ex-series/tc7/getting-started-guide/video-systems-getting-started-guide-tc72.pdf











http://www.cisco.com/c/dam/en/us/td/docs/telepresence/infrastructure/conductor/install_guide/TelePresence-Conductor-Virtual-Machine-Install-Guide-XC2-4.pdf

Release Note:

http://www.cisco.com/c/dam/en/us/td/docs/telepresence/infrastructure/conductor/release_note/TelePresence-Conductor-Release-Notes-XC2-4-1.pdf

Cisco Jabber Guest


http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/jabber/Guest/10_0/ag/JABC_BK_J76828F6_00_jabberc-admin-and-api-guide/JABC_BK_J76828F6_00_jabberc-admin-and-api-guide_chapter_01.html

Installation Guide:

http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/jabber/Guest/10_0/icg/JABC_BK_J0FC634A_00_jabberc-installation-and-configuration-guide/JABC_BK_J0FC634A_00_jabberc-installation-and-configuration-guide_chapter_010.html

Cisco TelePresence Server

Release Note:

www.cisco.com/c/dam/en/us/td/docs/telepresence/infrastructure/ts/release_note/Cisco-TelePresence-Server-Software-Release-Notes-4-0-2-8.pdf

Installation Guide:

http://www.cisco.com/c/dam/en/us/td/docs/telepresence/infrastructure/ts/install_guide/Cisco_TelePresence_Server_7010_Installation_Guide.pdf

http://www.cisco.com/c/dam/en/us/td/docs/telepresence/infrastructure/ts/install_guide/Cisco-TelePresence-Server-on-Virtual-Machine-Install-Guide-4-0-2-8.pdf

Deployment Guide:

www.cisco.com/en/US/docs/telepresence/infrastructure/ts/deployment_guide/Cisco_TelePresence_Server_Deployment_Guide.pdf

Cisco Prime Collaboration Provisioning Guide - Standard and Advanced, 10.6

http://www-author.cisco.com/c/en/us/td/docs/net_mgmt/prime/collaboration/10-6/provisioning/Cisco_Prime_Collaboration_Provisioning_Guide_10_6.pdf

Cisco Prime Collaboration Assurance Advanced Guide 10.6

http://www-author.cisco.com/c/en/us/td/docs/net_mgmt/prime/collaboration/10-6/assurance/advanced/guide/Cisco_Prime_Collaboration_Assurance_Guide_Advanced_10_6.pdf

Cisco Prime Collaboration Analytics Guide 10.6

http://www-author.cisco.com/c/en/us/td/docs/net_mgmt/prime/collaboration/10-6/analytics/guide/Cisco_Prime_Collaboration_Analytics_Guide_10-6.pdf

Release Notes for Cisco Prime collaboration Deployment 10.5(1)

http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/rel_notes/10_5_1/CUCM_BK_P139675A_00_pcd-rns-1051/CUCM_BK_P139675A_00_pcd-rns-1051_chapter_01.html

Cisco Prime Collaboration Deployment Administration Guide Release 10.5(1)





























http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/pcdadmin/10_5_1/CUCM_BK_U35347D2_00_pcd-administration-guide-1051/CUCM_BK_U35347D2_00_ucmap-administration-guide-1051_chapter_01.html

Troubleshooting Cisco Prime Collaboration Deployment


Release Notes for Cisco Unified Communications Manager Release 10.5(1)

http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/rel_notes/10_5_1/CUCM_BK_CE15D2A0_00_cucm-release-notes-1051/CUCM_BK_CE15D2A0_00_cucm-release-notes-1051_chapter_00.html












test results for cisco unified communications system release 10 · cuc ciscounityconnection...

Documents