test results for cisco collaboration systems release 12.5 ... › c › dam › m › ja_jp ›...

Test Results for Cisco Collaboration Systems Release 12.5 Testing forJapanFirst Published: 2019-02-11

Last Modified: 2019-02-15

Americas HeadquartersCisco Systems, Inc.170 West Tasman DriveSan Jose, CA 95134-1706USAhttp://www.cisco.comTel: 408 526-4000

800 553-NETS (6387)Fax: 408 527-0883

C O N T E N T S

Cisco Collaboration Systems Release Test 1C H A P T E R 1

Cisco Collaboration Systems Release Test 1

Cisco Collaboration Systems Release Test for Japan 2

Acronym 3

Cisco Unified Communication System Upgrade Test 7C H A P T E R 2

Cisco Unified Communication System Upgrade Test 7

Test Topology and Environment Matrix 9C H A P T E R 3

Test Topology 10

Environment Matrix 11

Open Caveats 16

Resolved Caveats 17

What's New? 18

Test Results Summary 31C H A P T E R 4

Cisco Unified Communications Manager 31

Cisco Unified Communications Manager IM & Presence Service 35

Cisco Unified Communications Manager Express 37

Cisco TelePresence Video Communication Server 47

Cisco Integrated Service Digital Network 131

Cisco IP Phones 133

Cisco Jabber Clients 141

Cisco Jabber Guest 148

CFD Cases 152

ISDN PRI 155

Test Results for Cisco Collaboration Systems Release 12.5 Testing for Japaniii

Cisco Webex Teams 157

Cisco Webex Meetings 194

Cisco Webex Room OS 205

Cisco Webex Board 55 284

Cisco Meeting Server 292

Cisco TelePresence Multipoint Control Unit 376

Cisco TelePresence Server 393

Cisco TelePresence Conductor 404

Cisco TelePresence Management Suite 411

IX 5000 416

Cisco Unified Communication System Upgrade Test 420

Upgrade Paths 420

Upgrade 9.1.2 to 12.5 422

Upgrade 10.5.2 to 12.5 430

Upgrade 11.0.1 to 12.5 437

Upgrade 11.5.1 to 12.5 445

Related Documentation 453

Test Results for Cisco Collaboration Systems Release 12.5 Testing for Japaniv

Contents

C H A P T E R 1Cisco Collaboration Systems Release Test

• Cisco Collaboration Systems Release Test, on page 1• Cisco Collaboration Systems Release Test for Japan, on page 2• Acronym, on page 3

Cisco Collaboration Systems Release TestCisco Collaboration Systems Release test is an integral part of the Enterprise Voice Solution Managementwhich includes key components such as Cisco Unified Communications Manager, Cisco UnifiedCommunications Manager Express, Cisco TelePresence Video Communication Server, Cisco TelePresenceVideo Communication Server Expressway, Cisco Webex Teams, Cisco Webex Room OS, Cisco WebexBoard 55 and Cisco Meeting Server. It is a program that validates and tests specified system-level solutionfor the various products and platforms in the Cisco Collaboration System.

Cisco Collaboration Systems Release, the systems integration layer, ensures that the Collaboration SystemsRelease components are delivered across the various engineering teams, when combined, improves the softwarequality. This is achieved by testing the different components.

The requirements for Cisco Collaboration Systems Release is derived based on the following:

• Popular customer scenarios• Customer demands for upgrade• Inputs from various Business Units, fields and Cisco Services

The test bed architecture is built based on the Solution Reference Network Design (SRND), cross-section ofproduct deployment models etc. The different types of testing carried out as a part of Cisco CollaborationSystems Release are:

• Interoperability/Compatibility• Functionality• Availability/Reliability/Stability• Performance/Scalability/Capacity• Usability/Serviceability• Special focus area - CAP (Customer Assurance Program)/Technical Assistance Center (TAC)• Security

Test Results for Cisco Collaboration Systems Release 12.5 Testing for Japan1

Cisco Collaboration Systems Release Test for JapanCisco Collaboration Systems Release test for Japan includes key components such as Cisco UnifiedCommunications Manager, Cisco Unified Communications Manager Express, Cisco TelePresence VideoCommunication Server, Cisco TelePresence Video Communication Server Expressway, CiscoWebex Teams,Cisco Webex Room OS, Cisco Webex Board 55 and Cisco Meeting Server, which is in turn an add-on testingat the solution level, where the requirements gathered are specific to Japanese usage and market. Therequirements are derived based on the following:

• High priority cases that are covered by the Cisco Collaboration Systems Release test team• Inputs from SE's and TAC team of Cisco Japan

The test execution is carried out on selected Collaboration products, which affects the Japanese segment andthat are prioritized by SE's of the Cisco Japan team. Japanese specific equivalents such as Japanese locale andJPNP for Numbering Plan are implemented.

The objective of Cisco Collaboration Systems Release for Japan is to run a sub-set of system testing that isnot covered by Cisco Collaboration SystemsRelease Test and implement equivalents with Japanese environmentsuch as Japanese OS, localized application, selected Cisco Compatible Products and third party equipment.

In this Cisco Collaboration Systems Release for Japan, the following components are tested.

• Cisco Unified Communications Manager• Cisco Unified Communications Manager Express• Cisco TelePresence Video Communication Server• Cisco TelePresence Video Communication Server Expressway• Cisco Unified Communications Manager IM and Presence• Cisco TelePresence Multipoint Control Unit• Cisco TelePresence Management Suite• Cisco TelePresence Conductor• Cisco TelePresence Server• Cisco Expressway• Cisco Meeting Server• Cisco IP Phone• Cisco Jabber (Windows/Mac/iOS/Android)• Cisco Webex Teams (Windows/Mac/iOS/Android/Web)• Cisco Webex Room OS• Cisco Webex Board 55• Cisco Webex Meetings• Cisco TelePresence Endpoints

Cisco Webex Teams (formerly Cisco Spark)

Cisco Webex Devices (formerly Cisco Spark Devices)

Cisco Webex Board (formerly Cisco Spark Board)

Note


Cisco Collaboration Systems Release TestCisco Collaboration Systems Release Test for Japan

AcronymDescriptionAcronym

Active DirectoryAD

Advanced Encryption StandardAES

Audible Message Waiting IndicatorAMWI

Cisco Application Policy Infrastructure Controller Enterprise ModuleAPIC-EM

American Standard Code for Information InterchangeASCII

Analog Telephone AdapterATA

Bulk Administration ToolBAT

Business EditionBE

Busy Lamp FieldBLF

Cisco Directory IntegrationCDI

Collaboration EdgeCE

Call Forward AllCFA

Call Forward BusyCFB

Call Forward No AnswerCFNA

Cisco Jabber for AndroidCJA

Cisco Jabber for iPhoneCJI

Cisco Jabber for MacCJM

Cisco Jabber for iPadCJIPad

Cisco Jabber for WindowsCJW

Command Line InterfaceCLI

Client Matter CodeCMC

Call Management RecordCMR

Cisco Meeting ServerCMS

Cisco Options PackageCOP

Client Services FrameworkCSF

Cross-Site Request ForgeryCSRF

Cisco Unity ConnectionCUC

Cisco Web DialerCWD

Cisco Webex TeamsCWT

Directed Call ParkDCP


Cisco Collaboration Systems Release TestAcronym

Directory NumberDN

Dialed Number AnalyzerDNA

Do Not DisturbDND

Enhanced 911E911

Elliptical Curve Digital Signature AlgorithmECDSA

Emergency Location Identification NumberELIN

Enterprise License ManagerELM

Enhanced Line ModeELM

Extension MobilityEM

Extension Mobility Cross ClusterEMCC

Forced Authorization CodeFAC

Federal Information Processing StandardsFIPS

Fully Qualified Domain NameFQDN

First Time ExperienceFTE

Hosted Collaboration SolutionHCS

Hypertext Transfer ProtocolHTTP

Inter Cluster TrunkICT

Identity ProviderIdP

Intercluster Lookup ServiceILS

Instant MessagingIM

Internetwork Operating SystemIOS

Integrated Service Digital NetworkISDN

Interactive Voice ResponseIVR

Lightweight Directory Access ProtocolLDAP

Media Adaptation and Resilience ImplementationMARI

Multipoint Control UnitMCU

Multi Device MessagingMDM

MultiDimensional eXpressionsMDX

Managed File TransferMFT

Media Gateway Control ProtocolMGCP

Multilevel Precedence and PreemptionMLPP

Music On HoldMOH

Mobile and Remote AccessMRA



Message Waiting IndicatorMWI

Network Interface and Configuration EngineNICE

New Technology LAN Manager version 2NTLMv2

One Button To PushOBTP

Operations ManagerOM

On Screen DisplayOSD

Peer-to-PeerP2P

Product Authorization KeyPAK

Picture in PicturePIP

Personal MultipartyPMP

Provisioning Northbound InterfaceProvisioning -NBI

Primary Rate InterfacePRI

Problem Reporting ToolPRT

Quality Report ToolQRT

Remote Desktop ProtocolRDP

Real Time Control ProtocolRTCP

Real Time Monitoring ToolRTMT

Realtime Transport ProtocolRTP

Security Assertion Markup LanguageSAML

Skinny Client Control ProtocolSCCP

Secure File Transfer ProtocolSFTP

Session Initiation ProtocolSIP

Small and Midsize BusinessSMB

Shared MultipartySMP

Service Set IDentifierSSID

Simple Network Management ProtocolSNMP

Service Set IDentifierSSID

Smart Software LicensingSSL

Single Sign OnSSO

Technical Assistant CenterTAC

Transport Layer SecurityTLS

TelePresence Management SuiteTMS

TelePresence Management Suite Provisioning ExtensionTMSPE



Trust Relay PointTRP

Cisco Unified Communications ManagerUnified CM

Cisco Unified Communications Manager ExpressUnified CME

Cisco Unified Survivable Remote Site TelephonyUnified SRST

Uniform Resource IdentifierURI

Uniform Resource LocatorURL

Coordinated Universal TimeUTC

Cisco TelePresence Video Communication ServerVCS

Cisco TelePresence Video Communication Server ExpresswayVCS-E

Cisco TelePresence Video Communication Server ControlVCS-C

View Mail for OutlookVMO

Voice over IPVoIP

Voice Profile for Instant MessagingVPIM

Video SLA Assessment AgentVSAA

TelePresence Server on VMVTS

Waveform Audio File FormatWAV

Extensive Application Programming InterfacexAPI

Extensible Markup LanguageXML

Extensible Messaging and Presence ProtocolXMPP



C H A P T E R 2Cisco Unified Communication System UpgradeTest

• Cisco Unified Communication System Upgrade Test, on page 7

Cisco Unified Communication System Upgrade TestCisco Unified Communications SystemUpgrade Test is an integral part of the Cisco Unified Communicationssolution. It is a program that validates and tests upgrade of Unified CommunicationsManager SystemRelease12.5 . This is achieved by testing the upgrade of different versions of Cisco Unified CommunicationsManagerto the latest version 12.5 using Cisco Prime Collaboration Deployment and L2 Upgrade.

This document contains the test results of Cisco Unified Communications Upgrade Testing with Japaneselocalized environment. The testing involves upgrade of different release of Unified CommunicationsManagerto Virtualized Servers on VMware on UCS C-series servers with Japanese environment such as Japanese OSand localized application.

The test execution is carried out on selected UC products, which affects the Japanese segment and that areprioritized based on inputs from various teams of Cisco Japan. Japanese specific equivalents such as, Japaneselocale, Japanese Operating System, and JPNP for Numbering Plan are implemented. Cisco UnifiedCommunications System Test for Japanese is a testing at the solution level, where the requirements gatheredare specific to Japanese usage and market. The requirements are derived based on the following :

• Customer demands for upgrade• Inputs from various teams of Cisco Japan.

The objective of Cisco Unified Communications System Test for Japanese is to run a sub-set of system testingthat is not covered by Cisco Unified Communications System Test and implement equivalents with Japaneseenvironment such as Japanese OS and localized application.



Cisco Unified Communication System Upgrade TestCisco Unified Communication System Upgrade Test

C H A P T E R 3Test Topology and Environment Matrix

• Test Topology, on page 10• Environment Matrix, on page 11• Open Caveats, on page 16• Resolved Caveats, on page 17• What's New?, on page 18


Test Topology


Test Topology and Environment MatrixTest Topology

Environment MatrixVersionComponentApplications

12.5.0.99834-3VersionCisco UnifiedCommunications Manager

Call Control

cm-locale-ja_JP-12.5.2.9902-28Locale

3-1-10.JPDial Plan

12.3VersionCisco UnifiedCommunications ManagerExpress 12.3Locale

X8.11.3VersionCisco TelePresence VideoCommunication ServerExpressway (VCSExpressway)

vcs-lang-ja-jp_8.11_amd64.tlpLocale

X8.11.3VersionCisco TelePresence VideoCommunicationServer(VCS) vcs-lang-ja-jp_8.11_amd64.tlpLocale

8.10-1.0321349ManagementConnector

8.10-1.0.6548Call Connector

X8.11.3VersionCisco TelePresence VideoCommunication ServerExpressway vcs-lang-ja-jp_8.11_amd64.tlpLocale

12.5.0.99834-3VersionCisco UnifiedCommunications ManagerIM and Presence Service

Applications

ps-locale-ja_JP-12.5.0.9902-48Locale

2.4VersionCisco Meeting Server

1.1.0.27VersionCisco MeetingManagement

33.5.1.7VersionCisco Webex MeetingsWBS33

12.5.0.99835-4VersionCisco Unity ConnectionVoice Mail andUnified Messaging uc-locale-ja_JP-12.5.0.1-164Locale


Test Topology and Environment MatrixEnvironment Matrix

VersionComponentApplications

12.5.1.MN-420Cisco IP Phone7811/21/32/41/61

End Point

12.5.1.MN-420Cisco IP Phone8811/41/45/51/61/65

11.0.4SR1.13Cisco Wireless IP Phone8821

9-4-2SR4-1Cisco Unified IP Phone9951/71

12.0.1 SR1Cisco ATA 191

CE 9.5.0SX20 - Cisco TelePresenceSX20 Quick Set

CE 9.5.0SX80 - Cisco TelePresenceSX80 Codec

CE 9.5.0SX10 - Cisco TelePresenceSX10 Quick Set

CE 9.5.0MX200-G2 - CiscoTelePresence MX200 G2

CE 9.5.0MX300-G2 - CiscoTelePresence MX300 G2

CE 9.5.0Cisco Webex Room Kit

CE 9.5.0Cisco Webex Room KitPlus

CE 9.5.0DX70-CiscoWebex DX70

CE 9.5.0DX80-CiscoWebex DX80

15.7.3 M3IOSISR Gateways(3945e/3925e/3945/2921)

CommunicationsInfrastructure

16.9.1IOSISR 4451-X / 4351

16.9.1IOSCisco Unified BorderElement for ISR

16.6.2Cisco 3750 PoE Switch

6.0,6.5vCenter Server

5.2(2 a)M9500MDS Switch




15.7.0VersionCisco TelePresenceManagement Suite-TMS

TelePresence

4.5(1.98)VersionMCU 5310 & 5320 - CiscoTelePresence MCU MCU_4-3_UI_and_audio_JPN.packageLocale

4.5(1.89)VersionMCU 4510

4.4(1.24)VersionCisco TelePresence Server

XC4.3.3VersionCisco TelePresenceConductor

4.4(1.24)VersionCisco TelePresence Server7010

15.3.3VersionWireless Access PointAIR-CAP702I-Q-K9

Wireless andMobility

8.8.104.16VersionWireless Lan Controller




12.5.0.269701VersionCisco Jabber for MacMessagingApplications 12.5.0.269693VersionCisco Jabber for Windows

12.5.0.269655VersionCisco Jabber for iOS

Apple iOS 12.0(16A366)iPhone6

Apple iOS 12.0(16A366)iPhone6S

Apple iOS 12.0(16A366)iPhone7

Apple iOS 12.0(16A366)iPhone X

Apple iOS 12.0.1iPad Pro

Apple iOS 12.0.1iPad Air

Apple iOS 4.3.2Apple Watch

12.5.0.270967VersionCisco Jabber for Android

Android OS 7.0Galaxy S6

Android OS 7.0Galaxy S7

Android OS 7.1.3Xperia Z3

Android OS 7.1Xperia Z3+

Android OS 8.1.0Nexus 5X

Android OS 8.1.0Nexus 6P

Android OS 6.0.1Sony Watch

Android OS 6.0.1Sony Tab

3.11(26683) and 3.8(26341)Version foriPhone and iPad

Cisco Webex Teams

3.04785Version forAndroid

3.0.9230.0Version for Mac

3.0.9257.0Version forWindows

2.0.0Version forWeb

Room OS 2018-10-10 01dee0d1189Version forWebex RoomOS

Cisco Webex Room OS

180907.05896.3Cisco WebexBoard 55

Cisco Webex Board 55

33.5.1.7VersionCisco Webex Meetings forDesktop Client




Cisco Webex Meetings forMobile Client

11.3.0.21130214, 11.3.0(11300.338) and11.1.0(11100.116)

Version forAndroid andiOS (iPhone andiPad)

1.11.3Version forWindows

Cisco Meeting App

1.11.3Version for Mac

1.11.3Version for iOS

2.2(3d)CiscoUCS6140Fabric InterconnectPRIMARY

UCS

2.2(3d)CiscoUCS6140Fabric InterconnectSUBORDINATE

2.2(3d)CiscoUCS6140Fabric Cluster

ESXi 6.0 & 6.5B-Series ServerESXi Host

ESXi 6.0 & 6.5C-Series Server

Windows 7 - SP1 (Japanese)Windows 7-SP1Operating SystemClient

Windows 8/8.1 (Japanese)Windows 8/8.1

Windows 10 (Japanese)Windows 10

10.13.6Mac Book Air

10.14Mac Book Pro

IE 11.1 (Supported Japanese language)IEBrowser

42.17134.167.0Microsoft Edge

Firefox 62.0.3, Firefox ESR60.2.2(Supported Japanese Language)

Mozilla Firefox

Chrome 69.0.3497.100,70.0.3538.67(Supported Japanese language)

Chrome

11.1.2,12Safari

2.4Chrome, IE,Firefox

Cisco Meeting ServerWebRTC

2016VersionMicrosoft Skype forBusiness Client




Windows Server 2008 R2(Standard,Enterprise, Datacenter -Japanese)

MicrosoftWindows ServerServer

Windows Server 2012 R2 (Standard,Datacenter - Japanese)

Windows Server 2016 Datacenter-Japanese

2015Microsoft Skype forBusiness Server

2013 & 2016Microsoft Exchange Server

Open CaveatsTitleDefect ID

Camera Control Icon of the Far End Participant unavailable after Network Re-throwCSCvh14061

Participant Notification is not displayingwhile transferring the video call in meet me conferenceCSCvh63520

Display name of CMS is not displayed in Recents optionCSCvi18326

Favorite option is not displayed in SX20 Quick Set after completed TransferCSCvi88211

No 'Joined the call' notification in MX300 G2 after answering the incoming callCSCvj06866

MoH during conference call with analog phones failsCSCvm80375

ATA 191: Call from analog phone endpoint is active post a completed conference callCSCvm96062

Unable to see video window in Jabber for iPhone XCSCvm82363

IOS Proximity could not answer second call paired with MX200 G2CSCvm93314

NTP Status Error message reflecting twice in CE Endpoints when NTP is not configuredCSCvm83907

The Percentage of volume Increase/Decrease is not visible on MX300 G2 Touch 10CSCvm48079

Unable to Share presentation from SX10 Quick Set during meet me conference of 4510CSCvm71707

Video with presentation is not visible in SX10 Quick Set while it initiate Adhoc conferenceCSCvm83431

Incomplete space name when direct call is made againCSCvm65578

Notification in chat bubble is not cleared even after the message is read for guest login inWebRTC

CSCvm64023

Japanese characters given in json file are not supported during WebRTC CustomizationCSCvn00027

In iPad and iPhone media controls is missing when created conference meeting via webRTCCSCvm93547

Joining meeting as a guest host who created, the meeting space gets disconnected from themeetings

CSCvm79990

CMA (Windows) is receiving chat messages only after refreshing the spaceCSCvm96189


Test Topology and Environment MatrixOpen Caveats

The chat messages always scrolls to top in CMA for WindowsCSCvm96198

iOS: Participants in meeting displayed wrongly (2 out of 3 is only displayed in iPhone)CSCvm80234

iPad: Incomplete Meeting info -> No Space Name, No Ways to inviteCSCvm80242

iPad: Participants in meeting displayed all 3 same in iPadCSCvm80248

Call Transfer merged as second incoming call during Meet-Me Conference in Cisco VCSCSCvk45224

Setting Japanese Presentation Name does not reflect when endpoints registered in UnifiedCM via MRA

CSCvk47747

Error unknown is displaying after pressing mobility soft key for IP Phone (78xx) in Japaneseenvironment

CSCvk23220

Call Back toast message is missing for Japanese in Cisco 78xx IP Phone.CSCvk16426

Quality report logs are not showing in Japanese for 8821 phonesCSCvk19816

Jabber for Windows screen is showing black when changing desktop screen resolution duringscreen share

CSCvk43072

Jabber for Windows screen is displaying black during screen share while changing desktoporientation

CSCvk43089

ATA 191:SIP CALL:Call is active even after the reciever drops the callCSCvk47824

ATA191:Busy tone is not triggered in 88xx/78xx while the analog endpoint is on another callCSCvk47833

Add “invite attendee” feature is not there in Cisco Webex for Windows Web AppCSCvk44700

Resolved CaveatsTitleDefect ID

CMA Participants list not displayed in CMA (iPhone and iPad)CSCvi67302

Host is not able to add participant in Adhoc ConferenceCSCvm96226

Calling to IX5000 from the same Endpoint, can see Accept and reflects in Missed CallNotification

CSCvm50929

Volume down Button of MX300 G2 Touch 10 is not workingCSCvm49002

Unable to select help icon on WebRTC (Windows) during meeting while joined as guest userCSCvm52727

No video in equal layout of Webex Room Kit during Whiteboard sharingCSCvm59356

Rebranding Cisco Webex not translated aptly in Japanese EnvironmentCSCvk05432

Call Duration Timing mismatch in Touch 10 of Cisco IX5000 when called to Webex RoomKit

CSCvj96616

Proximity pairing volume indicator freezes at value 70 in Web UI of IX5000CSCvk30605

Unable to View the Incoming call notification message in Android WebRTC in ChromeBrowser

CSCvj97278

Unable to open the Hyper link for weblink invite in Chrome Webrtc (MAC)CSCvj97264


Test Topology and Environment MatrixResolved Caveats

What's New?New FeaturesComponents

Consistent EM and EMCC Multi Login BehaviorCisco UnifiedCommunicationsManager Quick Add and Universal templates enhancements

Consistent EM and EMCC Multi Login Behavior

Extension Mobility: Maximum Login time at User Level

Rank-Based Access Control enhancements

Activation Code based Device On Boarding (on premises)

Voice Hunt Group Enhancements on Unified CMECisco UnifiedCommunicationsManagerExpress

Support for Cisco IP Conference Phone 7832 on Unified CME

Enhanced Line Mode for 8800 Series Phones on Unified CME

Music on Hold from a Live Feed on Unified CME

TLS Proxy support for Cloud on boardingCisco UnifiedCommunicationsManager IMand Presence

Centralized IM&P Cluster Deployment - backport to 11.5 SU4

Incoming Call Notifications (CallerID) Replaces Line Text LabelsCisco IPPhones Instances of same DN on (2) different partitions on Recents Call History on 88xx - Should

Only show 1

Add/Modify Speed dial through phone UI

All Favorites change to Speed Dial

Whisper paging on/off on CME

ISDN Switch-type as "Primary-ntt" for Japan and tested the ISDN PRI Call ScenariosISDN PRI


Test Topology and Environment MatrixWhat's New?

Multi line supportCisco Jabberfor Desktopclients Rename “Meet Now” to “Start Meeting”

Forgot Password function for Jabber

New Animated Emoticons in 12.0

Speedup the launch time

Default setting Mute MIC in Jabber clients for all calls

Fast WebEx

Update forward message based on forward status

Add a setting in Options

Verification of UDS Proxy support for OpenLDAP

Change Voice messages to Voicemail in UI clients

Phone mode with contacts

Single Number reach

Support starting multiple WebEx meetings

Local contact Import



Default setting Mute MIC in Jabber clients for all callsCisco Jabberfor MobileClients The user could pass the authentication with touch ID

Use Jabber as a default dialer in iPhone

Spotlight search for Jabber Contacts

Remind the end user the contact existed in this group

UX enhancement on Android

Grant the file permission when the user share a file

Verification of UDS Proxy support for OpenLDAP

Change Voice messages to Voicemail in UI clients

Animated Emoticons

Show Offline Contacts and Accessibility

Out of Box Windows Accessibility

Active Control

AES push notification(CJI)

Persistent chat (All Clients)

Check diagnostics report of Cisco Jabber(CJI/CJA)

Add labels for each phone number(CJI)

Change sign-in Email hint(CJA)

Admin control to disable converting numbers to SIP URI(All)

Hide contact photo everywhere when turn off show contact photo(CJA)

Google Calendar Integration(CJM)

User options to enable Google calendar integration

Callme emoticon feature to Jabber Mac(CJM)

Promote Jabber mobile on Jabber desktop client(CJW)



User Interface Menu ChangesCisco VCS

Changes to TLS and Cipher Suite default

ESXi 6.5 Support

Access Policy Support for MRA

Access Control Configuration Changes for MRA

Support for Sip & H.323 registration on Expressway-E

Multiway Support on Expressway

Increased round trip delay for clusters

Load Balancing CMS - Call Bridge Groups

MRA Recording (i-BiB)

Extension mobility over MRA

Hunt Groups over MRA

Cluster deployment enhancement

Lync Share support with Cluster CMS

Load Balancing CMS-Call Bridge Groups

Support for Hunt Groups Over MRA

Forward Proxy Tunnel

HTTP Proxy for Apple Push Notification Service

Custom Domain Search

Diagnostic Logging

Management Port

Reduce No of License Keys

TMS Provisioning Extension Services

Unique crypto keys

Trusted CA Certification Validation

Secure Smart call home connection

OAuth (Open Autherization) with refresh overriding Single Sign On redirect

Restart alarm should be raised on converting Expressway-C to Expressway-E

Default TURN Relays licenses are available in Expressway-E

Expressway role selection wizard (CE1200 only)

System scale

Oauth (Open Autherization) on Cisco Call manager (CUCM) SIP Line

Make Presence Status UI available in Expressway



Intercom support over MRA

Interconnectivity Estabilishment (ICE) Support on Expressway

SIP Proxy for Multiple Meeting Server Conference Bridges

Mandatory Password on Backups

Multiple Presence Domains / Multiple IM Address Domains are supported over MRA

Branding and Halfwake CustomizationCE 9.X

Improved In-room control editor

Admin settings lockdown in UI

Removal of Cisco Proximity indicator

Changing device activation will reset the codec

SRKP with Precision 60 Camera support

Accessibility: Amplified Visual

OBTP Snooze

Touch 10: Custom call rate selection

DX mirrored self view configuration

Highlighted UX changes

Microphone overload diagnostic message

Resume a postponed upgrade

Noise Suppression

Improved Touch 10 Activities

Backup and restore hidden configuration

Support for retrieve provisioning file from URL/FTP Server

Support for Provisioning of Local phone books

RoomOS / CE9.4.0 - Rebranding (Visuals) [Onprem]

H264 video codec with HCP support

Support for Adding participant on CMS bridges

Required Admin User for XAPI access

PIN Challenge for Manual Pairing Touch 10 with TP Endpoints

HDCP(High Definition Copy Protocol) Support for Room Series

Supports Dot.Net Framework 4.7CiscoTelePresenceManagementSuite

Template support for Cisco Meeting Server



Local contactsHeracles

Favorites

Shared line

Prioritized calls

Self care portal

Create a problem report from the phone

Swap between active and held calls

Proximity based Content SharingIX 8.3.1.1

3rd Party CA Certificate Support

DTLSV1,2 Support



Schedule a CallCisco WebeExTeams Diagnostic Information about the devices you pair to the Cisco Spark app

Copy and Paste links from a web browser into Cisco Spark

Frequent Meetings

Profile picture initials

Space's retention policy

New Meeting Layout

New Messaging Features

New Messaging Layout

Initial setup

Mentions message layout

Cisco Spark on an unsupported browser

Join a Meeting box

Minimized and Full screen video at same time

Marking All new messages as read

Stop text from appearing in message notifications

Drafts

Timestamp List

Meeting Tab

Avatar Upload Support

Video Layout Redesign(1:1 meetings)

Full Screens Preview Enhancement

Direct Join Enhancement

Updated Personal Room Lobby Experience

Calling with Cisco Spark for Web on Chrome

Share your screen on Cisco Spark for Mobile Clients

Copy and share from Space to Space

Show in Space

Meeting List, Scheduled Meeting Notifications, More Ways to Join

I18 n Coverage – New Features

Announcement Mode

Application sharing

Restore pages after signed out



Mention All to notify everyone

Terms of Service, Privacy, and Notices and Disclaimers updates(I18n validation)

See Who's in Your Meeting

Cisco Webex Teams Installation and Automatic Upgrade Changes in Windows

Drafts in Cisco Webex Teams for Web

Join Button for Scheduled Meetings in Messages List (Web)

Newway of updating or Automatic Upgrade the CiscoWebex Teams app in Desktop clients

Open Links Using Safari

Notifications about Shared Whiteboards

Resume Sharing Your Screen or Marking Up a Snapshot

Mark Up Your Own Screen While Sharing in a Call or Meeting

Download Marked Up Snapshots

Streamlining Your Spaces

See Colleague's Webex Teams Status in Outlook and Call/Chat using Teams from Outlook

Calling supported in Chrome Web browser

Calling supported in Safari Web browser

Unread Messages

GIF’s



SX80 with Cisco Spark Quad Camera supportCisco WebexRoom OS Snap to whiteboard configuration UI

People Count

People Count for local meetings

HTTP Proxy

Branding and Halfwake Customization

Set ringtone and adjust ringtone volume

Room Kit Plus Precision 60 Camera

Source Composition

Rebranding (Visuals)

Noise suppression

Flashing screen for incoming calls

Improve Touch 10 activities (Extra buttons on home screen)

Automatic uploading of call logs

Whiteboard support on DX

Remote drop participants

OBTP Remind later/Snooze

Webex OBTP - Upcoming meeting list

Support incoming call while in wireless share or call

Unified Meeting Experience - Admit from lobby

Connectivity and Sharing from the Cisco Webex Teams app

HTTP to be ‘HTTPS’ as default instead of ‘HTTP+HTTPS’

Backlight Manual Control UI for DX Series

View Whiteboards and Annotations on Room Series

Undo for Whiteboard

Increasing API access for Webex Teams registered systems



Annotation on PresentationCisco WebexBoard 55 Wi-Fi Support for Cisco Spark Board

Connect Cisco Spark Board to a Proxy Server

HDMI Audio and Static IP

Name tags for participants

Change IP address from the Spark Board

Autoshare live of whiteboard (and content) in call

Share videos wirelessly - locally and in call

Resume screen share after annotation

Advanced settings menu in Cisco Webex Board 55

Auto-complete in search fields

Notification on the Board for Webex backed meetings

Recording indicator on Cisco Webex Board

Automatic Proxy Discovery

Share and Annotate on 4K Presentations

Expose Ultrasound Pairing Volume in Settings

New Toolbar for Whiteboarding and Mark Up

Join Scheduled Meetings with One Button to Push (OBTP)

Users can annotate on content while screen sharing, So that desktop Users can annotate onthe same content simultaneously

Cisco WebexMeetings

Users will now see a grid view on iPads, up to 6 participants at a time

Leverage Google Search to find your recently accessed personal rooms, or your ownpersonal room

In-app host recordings list

Scraped Webex Teams Space Meetings - iOS

Call-in user participant name edit support

Join Notification Improvements

Ability to enlarge/shrink the 3-D objects

Keep PRs history unless specified by user

Extend recently accessed Personal Room limit

Slide-based power point content sharing



Support for ESXi 6.5 and also ESXi 6.0 update 3Cisco MeetingServer Support for the new Cisco Meeting Apps version 1.10

Enhanced Meeting Experience

Support for load balancing

Call diagnostics in log bundle

API additions and change

Name Label API

CallBridge XMPP Trust Bu

Webbridge XMPP certificate checking

Webbridge XMPP trust store

API Support for Screen Layout & Name Label

API DTMF Add Participant

Changes to licensing for branding

Activation key required for unencrypted SIP media

Pane Placement

Using DTMF sequences in clustered Call Bridge deployments

Retrieving the Call Bridge media mode

Creating spaces with nonMemberAccess set to false

Bulk operation on participants

Summary of MMP Changes

Creating spaces with nonMemberAccess set to false

Bulk operation on participants

Summary of MMP changes

Load balancing across Meeting Servers when using Expressway

Setting the maximum number of video streams over a distribution link



New User Experience with improved workflows & new use casesCisco MeetingApp In-Meeting Controls

WebRTC browser parity with Firefox along with Chrome

Intelligent Pairing

Android WebRTC Enhancement

Changes to adhoc calls

Joining a meeting as a guest user

Localization enhancements

Meet one or more people in your organization either from a space or directly

Chat with one or more people in your organization

CMA Support - WebRTC on Firefox, WebRTC on Safari

Create Spaces to manage meetings

Add or edit members to the space to meet or chat

Invite guests to join meeting

Share content, screen or an application with in meeting with one or more participants

Join a meeting with a device of your choice

Chat with one or more people in your organization

Meet one or more people in your organization either from a space or directly

Invite guests to join meetings

Join a meeting with a device of your choice

Intelligent Proximity –Auto connect with Collaboration TP Endpoints

CMA Support - WebRTC on Firefox, WebRTC on Safari

Full Support for Firefox (Desktop only)

Full Support for Safari (Desktop only)

Full Support for Chrome on Android

FIPS cryptography Support (Desktop)

Support Common Access Card on PC client



Meeting Manager and Admin portalCisco MeetingManagement Pin and Unpin meeting at the top of the list

Search by meeting title or owner, or by individual participant

View and Download event log for a meeting

View connected Meeting Servers

Notifications

Change layout for all participants in a meeting

Controls to mute audio/video and drop participants

View a list of participants in a meeting

Add and remove Call Bridge nodes or clusters

NTP status

List of active or recent meeting

Support for large meetings

Scheduled meeting info

Sign-in Messages (Pre & Post Login CMM)

Enhanced audio and layout control during meetings

Integration with TMS Enhancement - Schedule and manage meeting in CMM

Ended meetings information in CMM for the last 24 hours

Integration with TMS Improvements

CMS Configuration Service via CMMWeb Interface

Managing Cisco Telepresence Endpoints via CMMWeb Interface

Meeting Management & Meeting Configuration Enhancements

Improvements to the User Interface

Filter for participants who are speaking and making noise

Improved sorting of meeting list and participant list

Report can take for ended meetings for the last 7 days

Simpler first time setup ( NTP, LDAP & Self- signed certificate are automaticallyconfigured)



C H A P T E R 4Test Results Summary

• Cisco Unified Communications Manager, on page 31• Cisco Unified Communications Manager IM & Presence Service, on page 35• Cisco Unified Communications Manager Express, on page 37• Cisco TelePresence Video Communication Server, on page 47• Cisco Integrated Service Digital Network, on page 131• Cisco IP Phones, on page 133• Cisco Jabber Clients, on page 141• Cisco Jabber Guest, on page 148• CFD Cases, on page 152• ISDN PRI, on page 155• Cisco Webex Teams, on page 157• Cisco Webex Meetings, on page 194• Cisco Webex Room OS, on page 205• Cisco Webex Board 55, on page 284• Cisco Meeting Server, on page 292• Cisco TelePresence Multipoint Control Unit, on page 376• Cisco TelePresence Server, on page 393• Cisco TelePresence Conductor, on page 404• Cisco TelePresence Management Suite, on page 411• IX 5000, on page 416• Cisco Unified Communication System Upgrade Test, on page 420• Related Documentation, on page 453

Cisco Unified Communications ManagerDefectsStatusCall

ComponentFlow

DescriptionTittleLogical ID


PassedIP Phone A ->Unified CM ->IP Phone B; IPPhone A ->Unified CM ->IP Phone C; IPPhone A ->Unified CM ->IP Phone D;

Verify whether user isable to do a calls from theCisco IP Phone 78xx to IPPhone 88xx with the sameuser logged in multipledevices

Dial a callbetween Cisco IPPhone 78xx andCisco IP Phone88xx withextensionmobility multipledevices enabledwith same user

UCJ12.5SPhI.CUCM.G.038

PassedIP Phone A ->Unified CM ->IP Phone B ->Unified CM ->IP Phone C

Verify whether blindtransfer is successful whenuser logged in withextension mobility crosscluster

Blind call transferfrom IP Phone78xx to IP Phone88xx using theextensionmobility in multilogin userbehavior


PassedIP Phone A ->Unified CM ->IP Phone B ->Unified CM ->IP Phone C->Unified CM ->IP Phone D ->Unified CM ->IP Phone E ->Unified CM ->IP Phone F

Verify whether user isable to make a chain calltransfer from IP phone Ato more than 5 Cisco IPPhones when logged inExtension mobility crosscluster

Make a chain calltransfer from IPPhone 78xx tomultiple IP Phone88xx usingExtensionmobility in crosscluster


PassedIP Phone A ->Unified CM ->IP Phone B ->Unified CM ->IP Phone C ->Unified CM ->IP Phone D

Verify whether user isable to set up a conferencecall from the Cisco IPPhone 78xxwhen logginginto the extensionmobilityin cross cluster

Set up aconference callbetween 78xx and88xx using theExtensionmobility in crosscluster


PassedIP Phone A ->Unified CM ->IP Phone B ->Unified CM ->IP Phone C

Verify whether user isable to park the call fromCsico IP Phone 78xx to88xx using the extensionmobility in cross cluster

Park a call in IPPhone 78xx bylogging intoextensionmobility


PassedIP Phone A ->Unified CM ->IP Phone B; IPPhone B ->Unified CM ->IP Phone C

Verify whether user isable to clear call logs inintra cluster after makingmultiple calls once logoutfrom the extensionmobility cross cluster

Clear call logsbehaviour in intracluster



Test Results SummaryCisco Unified Communications Manager

PassedNAVerify whether last loggedin user details are shownsuccssfull when login andlogout extension mobilityuser in Cisco IP Phone78xx for multiple times(ex. 10 attempt)

Remembering thelast logged in userdetails forExtensionMobility in crosscluster


PassedNAVerify whether admin isable to view the activelylogged in device report ofextension mobility whenlogged into the CiscoUnified CommunicationManager cross cluster

Status of activelylogged in devicereport in UnifiedCM


PassedIP Phone A ->Unified CM ->IP Phone B

Verify whether the CiscoIP Phone 78xx and 88xxis able make calls betweeneach other when added anew universal devicetemplate

Make a callbetween 78xx and88xx by creatinga new universaldevice templateand adding thedevice in the sametemplate


PassedJabber forAndroid ->Unified CM ->IP Phone A

Verify whether the user isable to add Cisco Jabberfor Android usinguniversal device templateand call connection hasbeen created beweenCisco Jabber for Androidand Cisco IP Phone 78xx/ 88xx

Adding the deviceJabber forAndroid withuniversal devicetemplate andmaking a callbetween Jabberand 78xx / 88xx


PassedIP Phone D ->Unified CM ->IP Phone B ->Unified CM ->IP Phone E

Verify whether ExtensionMobility multiple loggedend user can able to parkthe active call and retrievethe call in another CiscoIP Phone 88xx withinsame Cisco UnifiedCommunicationsManager

Call Park whenmultiple login isallowed withinIntra-Cluster

UCJ12.5SEFT.CUCM.G.001



PassedIP Phone D ->Unified CM1 ->IP Phone B; IPPhone B ->Unified CM1 ->SIP Trunk ->Unified CM2 ->IP Phone E

Verify whether ExtensionMobility enabled end usercan able to transfer itsactive call from Cisco IPPhone B(88xx) of CiscoUnified CM1 to Cisco IPPhone E(78xx) of CiscoUnified CM2 whenmultiple login behavior isallowed

Consult transferwhen multiplelogin behavior isallowed inInter-Cluster


PassedIP Phone E ->Unified CM2 ->SIP Trunk ->Unified CM1 ->IP Phone C

Verify whether ExtensionMobility enabled user canable to connectautomatically in the activecall when it is shared linewith another Cisco IPPhone 88xx and alsocheck the call status inmultiple logged in phones

AttendInter-Cluster callin shared linephone whenExtensionMobility user islogged intomultiple IPPhones


PassedIP Phone E ->Unified CM ->IP Phone D ->Unified CM ->IP Phone C

Verify whether ExtensionMobility user can able toattend the Call ForwardAll calls and also checkthe call can be hold andresumed in multiplelogged in IP Phoneswithinsame cluster

Hold and Resumethe CFA call inExtensionMobility enabledend user


PassedIP Phone F ->Unified CM ->IP Phone E ->Unified CM ->IP Phone D

Verify whether ExtensionMobility enabled end usercan able to connect in CallForward All call when itsshared line phone attendsthe call and also check thecall status in multiplelogged in phones duringhold and resume

ExtensionMobility enableduser connects toCFA call when itsin shared line


PassedIP Phone E ->Unified CM ->IP Phone D ->Unified CM ->IP Phone C

Verify whether ExtensionMobility enabled end userCisco IP Phone C(88xx)can able to picks up thecall successfully withinsame cluster and alsocheck the call status inmultiple logged in phones

EMmultiple loginend user picks thecall within samecluster




PassedIP Phone F ->Unified CM ->IP Phone E ->Unified CM ->IP Phone D ->Unified CM ->IP Phone C

Verify whether ExtensionMobility enabled end userfrom Cisco IP PhoneC(88xx) can able to jointhe active conference callthrough meet me numbersuccessfully and alsocheck the call status inmultiple logged in phones

Meet me fromEM enabled enduser whenmultiple loginallowed


PassedNAVerify that user has notgrant no read or updateprivileges when theadvanced role page forparent resource has set noread access

Advanced Rolesetting disabledwhen parentresource has NoRead and Noupdate privilege


PassedIP Phone E ->Unified CM ->IP Phone D ->Unified CM ->IP Phone A

Verify whether ExtensionMobility enabled end userof Cisco IP Phone 78xxand 88xx can be able toreceive the conference callnotification from Cisco IPPhone 7832 successfullywhen multiple login isallowed in the cluster

Conference callwhen multiplelogin is enabled inExtensionMobility


PassedNAVerify that user has givenread or update privilegeswhen the advancedresources set from defaultto read and update access

Advanced settingshas Read andUpdate privilegewhen Parentresource has thesame


CiscoUnifiedCommunicationsManagerIM&PresenceServiceDefectsStatusCall

ComponentFlow

DescriptionTitleLogical ID

PassedNAVerify whether Jabberusers registered throughCloud OnBoarding hasthe presence statusupdated wheniphone/ipad devices arepowercycled

Validation ofpresence status inJabber client onceApple Devices arepowercycled

UCJ12.5SPHII.IM&P.G.001


Test Results SummaryCisco Unified Communications Manager IM & Presence Service

PassedNAVerify whether pushnotification for theinstant messages isreceived in iWatch forJabber users logged iniPhone from differentclients

Validate the pushnotification forinstant messagesfrom multiple clientsfor apple devices


PassedNAVerify whether pushnotification for the filetransfer requests isreceived in iWatch forJabber users logged iniPhone

Validate the pushnotification for filetransfer requestsfrom multiple clientsfor apple devices


PassedNAVerify whether pushnotifications arestopped/not received forregistered jabber usersby disabling the "PushNotification" option inthe IM&P server CloudOnboarding section

Validate thenotifications statusby disabling the pushnotification in theCloud OnBoardingpage of IM&P server


PassedIP Phone A-> UnifiedCM -> CJI

Verify whether pushnotification for the VoIPcalls is received iniWatch for Jabber userslogged in iPhone

Validate the pushnotification for VoIPcalls to apple devices


PassedNAVerify whether presencestatus is active for userslogged in iPhone andiPad when any one ofthe device is logged outor shut down

Validate the presencestatus for userslogged in iPhone andiPadwhen any one ofthe device is loggedout or shut down


PassedCJA1 ->VCS-E ->VCS-C ->Unified CM-> VCS-C ->VCS-E ->CJA2 ->Unified CM-> CJI1

Verify whether presencestatus got updated forusers logged in Jabberclients registered inMRA

Validate the presencestatus for usersduring conferencecall between Jabberclients registered viaMRA



Test Results SummaryCisco Unified Communications Manager IM & Presence Service


Verify whether the pushnotification messagereceived for intra clustercall in Jabber clients viaMRA

Validate the pushnotification messagefor intra cluster callin Jabber clients viaMRA



Verify whether the pushnotification messagereceived for intra clustercall in Jabber clients viaMRA

Validate the pushnotification messagefor intra clusterconference call inJabber clients viaMRA


Cisco Unified Communications Manager ExpressDefectsStatusCall Component

FlowDescriptionTitleLogical ID

PassedIP Phone A ->Unified CME ->IP Phone B ->Unified CME ->IP Phone D; IPPhone A ->Unified CME ->IP Phone C;

Verify whether conferenceadmin is able to addparticipants into the existingconversation in CiscoUnified CommunicationsManager Express

Admincontrolling thehardwareconferencebehavior inUnified CME

UCJ12.5SPHI.CME.G.001

PassedIP Phone D ->Unified CME ->IP Phone A ->Unified CME ->IP Phone B ->Unified CME ->IP Phone C

Verify whether conferenceadmin is able to join into theexisting conversation bydialing the ad-hoc numberin Cisco UnifiedCommunications ManagerExpress

Join into theexistingconference as aadmin inUnified CME


PassedNAVerify whether sccpapplication is associated forhardware conferencesuccessfully in Cisco ISR4351 router for initiatinghardware conference inCisco UnifiedCommunications ManagerExpress

SCCPassociation forhardwareconference inUnified CME



Test Results SummaryCisco Unified Communications Manager Express

PassedNAVerify whether CiscoUnified CommunicationsManager Express is shownthe active status forhardware conferencesuccessfully once dspfarmis configured withregistered status

Register UnifiedCME forhardwareconference


PassedIP Phone A ->Unified CME ->IP Phone B ; IPPhone A ->Unified CME ->IP Phone C

Verify whether the one whoinitiated a conference call isable to add new participantssuccessfully by configuringadd-mode with creatoroption in Cisco UnifiedCommunications ManagerExpress

Hardwareconferenceadd-modecreator inUnified CME


PassedIP Phone A ->Unified CME ->IP Phone B ; IPPhone A ->Unified CME ->IP Phone C; IPPhone A ->Unified CME ->IP Phone D

Verify whether status of thedspfarm session summarydetails are shown for thehardware conference inCisco UnifiedCommunications ManagerExpres

Display ofsessionsummary statusduring hardwareconference inUnified CME



Verifywhether conversationis continued whenconference initiator dropsthe call from hardwareconference by configuringkeep conference in CiscoUnified CommunicationsManager Express

Keep conferenceon Cisco SIP IPPhones inUnified CME



Verify whether keep alivemessage is sent as per thetime interval from SIPPhones are in hardwareconference in Cisco UnifiedCommunications ManagerExpress

Keep aliveresponse forhardwareconference onSIP Phones inUnified CME




PassedIP Phone A ->Unified CME 1-> IP Phone B ;IP Phone A ->Unified CME 1-> SIP Trunk ->Unified CME 2-> IP Phone C

Verify whether Cisco SIPIP Phones are able to joininto the hardwareconference created fromCisco UnifiedCommunications ManagerExpress 1 to Cisco UnifiedCommunications ManagerExpress 2

HardwareconferencebetweenUnifiedCME clusters


PassedIP Phone A ->Unified CME ->IP Phone B ->Unified CME ->IP Phone C ->Unified CME ->IP Phone D

Verify whether Cisco IPPhone is able to join into thehardware conference usingbarge option configured inCisco UnifiedCommunications ManagerExpress

Join into thehardwareconference usingbarge in UnifiedCME


PassedIP Phone B ->Unified CME ->IP Phone A ->Unified CME ->IP Phone D ->Unified CME ->IP Phone C

Verify whether conferencestatus is shown the activeusers in the conferenceconversation when sharedline barge user disconnectsfrom the call conference inCisco UnifiedCommunications ManagerExpress

Connectionstatus whenconferenceconversationdisconnect frombarged phone inUnified CME


PassedIP Phone C ->Unified CME ->IP Phone A ->Unified CME ->IP Phone B

Verify whether transcoderstatus is changed fromxcode to conf wheninitiating hardwareconference in Cisco UnifiedCommunications ManagerExpress

Transcoderstatus before andafter initiatinghardwareconference fromUnified CME


PassedIP Phone A ->Unified CME ->IP Phone B

Verify whether Music onhold stream status is shownthe active clients during callheld state between CiscoSIP IP Phones in CiscoUnified CommunicationsManager Express

MoH streamstatus when callheld in UnifiedCME



Verify whether dspfarm isshown the channel statuswith the number of dspsduring Music on Holdbetween Cisco SIP IPPhones in Cisco UnifiedCommunications ManagerExpress

Status ofdspfarm duringMoH in UnifiedCME





Verify whether nightservice bell indicates toother phones with the nightservice notificationconfigured for non-businesshours in Cisco UnifiedCommunications ManagerExpress Cisco SIP IPPhones when receivingincoming calls

Night servicenotificationduringnon-businesshours in UnifiedCME


PassedIP Phone A ->Unified CME ->IP Phone B ->Unified CME ->IP Phone C

Verify whether calls areforwarded to configureddirectory number duringnight service and created asuccessful conversation inCisco UnifiedCommunications ManagerExpress Cisco SIP IPPhones

Night servicecall forward forCisco SIP IPPhones inUnified CME


PassedIP Phone A ->Unified CME ->IP Phone B ->Unified CME ->IP Phone D ->Unified CME ->IP Phone C

Verify whether nightservice call is answered byremote user and bargedsuccessfully in CiscoUnified CommunicationsManager Express

Barge nightservice call oncepicked up byshared line inCisco SIP IPPhonesregistered inUnified CME



Verify whether shared lineremote phone configuredwith do not disturb is shownthe remote in use statuswhile receiving theincoming call in shared linephone 1 and also verify theactive call status in ISR4351 router

Remote in usestatus in DNDenabled phonefor shared linewhen receivingan incoming call


PassedIP Phone A ->Unified CME 1-> IP Phone B ->Unified CME 1-> IP Phone C ->Unified CME 1-> SIP Trunk ->Unified CME 2-> IP Phone D

Verify whether originator isable to continue thehardware conference whenan existing user taken overthe conversation usingmobility in Cisco UnifiedCommunications ManagerExpress

Continue thehardwareconference fromSNR phone inUnified CME




PassedIP Phone A ->Unified CME 1-> IP Phone B ->Unified CME 1-> SIP Trunk ->Unified CME 2-> SIP Trunk ->IP Phone D

Verify whether singlenumber reach is answeredas soon as the mobility callinitiated in Cisco UnifiedCommunications ManagerExpress SIP Phones

Set too soontimer foranswering thecall in SNRdevice



Verify whether varioussupplementary features inCisco UnifiedCommunications managerexpress with all the phoneslocal to the branch

Supplementaryservices withCisco UnifiedCME


PassedIP Phone A ->Unified CM ->SIP Trunk ->Unified CME ->IP Phone B

Verify whether CiscoUnified CommunicationsManager Express is able toreceive a call whentransparent codec is set tog.711ulaw from CiscoUnified CommunicationsManager

Createtransparentcodec fordial-peers andestablish a callwith g.711ulawcodec fromUnified CM toUnified CME


PassedIP Phone A ->Unified CME ->IP Phone E

Verify whether hunt groupcall is answered as per thesequential algorithm in theshared line SIP IP Phonesregistered in the CiscoUnified CommunicationsManager Express

Sequential voicehunt groupbehavior forshared line SIPIP Phones inUnified CME

UCJ12.5SPHII.CME.G.001

PassedIP Phone A ->Unified CME ->IP Phone X

Verify whether configuredfinal destination number hasanswered the voice huntgroup incoming call whenshared line members invoice hunt group is notresponded using longest idlealgorithm in Cisco UnifiedCommunications ManagerExpress

Reach finaldestinationwhenlongest idlevoice hunt groupmember forshared line is notanswered inUnified CME


PassedIP Phone A ->Unified CME ->IP Phone D

Verify whether hunt pilotcall has been answereddynamically in shared linewhen voice hunt group isconfigured with parallelalgorithm in Cisco UnifiedCommunications ManagerExpress

Dynamicallyreceive voicehunt group callsfor shared linewhen configuredwith parallelalgorithm




PassedIP Phone S ->Unified CME ->IP Phone D; IPPhone A ->Unified CME ->IP Phone C

Verify whether shared linemember1 in the voice huntgroup is able to receive thehunt pilot call when sharedline member3 is in anotherconversation in CiscoUnified CommunicationsManager Express

Shared linebehavior whenreceivingincoming callsin voice huntgroup


PassedIP Phone S ->Unified CM ->SIP Trunk ->Unified CME ->IP Phone D ; IPPhone A ->Unified CME ->IP Phone C

Verify whether shared linemembers are able to receivethe incoming calls forparallel algorithmconfigured for voice huntgroup when one of theshared line member is incall conversation in CiscoUnified CommunicationsManager Express withUnified CM registeredphones

Shared linebehavior whenreceivingincoming callsin voice huntgroup forparallelalgorithm


PassedIP Phone A ->Unified CME ->IP Phone D ; IPPhone A ->Unified CME ->IP Phone C

Verify whether voice huntgroup statistics details withtotal number of hunt grouplogin and logout for callagents are generated andstored for every hours inlocal system from CiscoUnified CommunicationsManager Express

Storing huntgroup statisticsas a file in localsystem for everyhours


PassedIP Phone A ->Unified CME ->IP Phone D; IPPhone A ->Unified CME ->IP Phone C

Verify whether voice huntgroup statistics details withtotal number of hunt grouplogin and logout for callagents are generated for 5hours delay and stored inlocal system from CiscoUnified CommunicationsManager Express issuccessful when routerrestarted 1 hour before togenerating the statisticsreport

Delay huntgroup statisticsgeneration for aspecifiednumber of hourswhen routercomes backfrom restart




PassedIP Phone A ->Unified CME ->IP Phone D ->Unified CME ->IP Phone E

Verify whether call infoheader is detected for bargestatus in Cisco UnifiedCommunications ManagerExpress debug log whenshared line voice hunt groupcall is barged by remotephone

Call info headerfor barged voicehunt group callwith shared line


PassedIP Phone A ->Unified CM ->SIP Trunk ->Unified CME ->IP Phone D

Verify whether incomingcalls from Cisco Unifiedcommunications Manageris forwarded to voice huntgroup members configuredin Cisco Unifiedcommunications ManagerExpress through SIP Trunk

ForwardUnifiedCM calls toUnified CMEvoice hunt groupmembers


PassedIP Phone A ->Unified CME ->IP Phone D

Verify whether call madeduring the night service isforwarded to voice huntgroup members configuredin Cisco Unifiedcommunications ManagerExpress

Night servicecall forward tovoice hunt groupmembers


PassedIP Phone A ->Unified CME ->SIP Trunk ->Unified CM -> IPPhone X

Verify whether hunt pilotcall is transferred to thefinal target numberregistered in Cisco UnifiedCommunications Managerthrough SIP Trunk whenhunt group members forhunt pilot call configured inCisco UnifiedCommunications ManagerExpress is not answered

Transfer huntpilot call via SIPtrunk whenvoice hunt finalis targeted toUnified CM



Verify whether audiosupported for call madebetween different codecs9.729r8 and 9.711ulaw areconfigured for SIP IPPhones in Cisco UnifiedCommunications ManagerExpress

Codec when setthe g.729r8 inpreference 1 andcreating callconversationfrom 9.711ulaw





Verify whether audiosupported for call madebetween different codecs9.722-64k and 9.711ulawconfigured for SIP IPPhones in Cisco UnifiedCommunications ManagerExpress

Codec when setthe g.722-64k inpreference 1 andcreating callconversationfrom 9.711ulaw



Verify whether voice classcodec gives clear audioquality when call isestablished between videophones configured forshared line in Cisco UnifiedCommunications ManagerExpress

VCC whenvideo call placedbetween two SIPPhones



Verify whether all agentslogged out status is shownin the hunt group membersat the line level when thelast member of the huntgroup is logged out in CiscoUnified CommunicationsManager Express

All agentslogged out statusin hunt groupmembers inUnified CME



Verify whether stored flashbased Music on hold audiofile is pushed duringunavailability DSP (DigitalSignal Processor) resourcefor transcoding when triedfor live feed MoH

MoH live feedwhen DSPresourceunavailable fortranscoding



Verify supplementaryservices in enhanced linemode when MediaTermination Point (MTP)configured for Cisco IPPhone 88xx registered inCisco UnifiedCommunications ManagerExpress

Supplementaryservices fromenhanced linemode whenMTP configuredfor the 88xx

UCJ12.5SEFT.CME.G.001



PassedIP Phone B ->Unified CM ->SIP Trunk ->Unified CME ->IP Phone A

Verify Cisco IP Phone 88xxregistered in Cisco UnifiedCommunications ManagerExpress is worked forenhanced line mode whenthe phone re-registered backfrom primary TFTP serverfailure with secondaryTFTP server

Enhanced linemodefunctionalitywhen 88xxfailover fromprimary TFTPserver


PassedIP Phone A ->Unified CME 1-> SIP Trunk ->Unified CME 2-> IP Phone B

Verify Cisco UnifiedCommunications Manageris able to display list of filesthat are generated whenconfigurationmade in CiscoIP Phone 88xx for enhancedline mode

TFTP bindingfor 88xxconfigured withenhanced linemode


PassedIP Phone X ->Unified CME ->IP Phone B

Verify Cisco IP Phone 88xxis able to login and logoutfor the hunt groupconfigured using parallelalgorithm when Hlog isconfigured in enhanced linemode

Hunt grouplogin and logoutin 88xxenhanced linemode


PassedIP Phone B ->Unified CME ->SIP Trunk ->Unified CM -> IPPhone A

Verify Cisco IP Phone 88xxis able to enable the do notdisturb state with silentnotification when DNDcontrol is configured onenhanced linemode in 88xx

DND control in88xx enhancedline mode


PassedIP Phone C ->Unified CM ->SIP Trunk ->Unified CME ->IP Phone A

Verify Cisco IP Phone 88xxis enabled privacy fromenhanced line mode and notable to barge the shared linecalls in Cisco UnifiedCommunications Managerexpress when calling fromother cluster

Enable privacyfrom 88xxenhanced linemode and barge


PassedIP Phone C ->Unified CM ->SIP Trunk ->Unified CME ->IP Phone A

Verify Cisco IP Phone 88xxis retrieved the parked callsin enhanced line mode forthe directory numberconfigured in other lines in88xx

Park retrievalfrom enhancedline mode forother linesconfigured in8861





Verify syslog messages aregenerated for Cisco IPConference Phone 7832 asregistered or unregisteredfor manual registration, andregistered* or unregistered*for automatic registrationwith the DN utilizationrange 80 % and 100 %

Syslog messagefor auto andmanuallyregistered andunregistered7832 phones


PassedIP Phone B ->Unified CME ->IP Phone A ->Unified CME ->IP Phone C

Verify Cisco IP ConferencePhone 7832 is able totransfer calls withoutpressing the transfer buttonin phone by selecting speeddial or monitor line in CiscoUnified CommunicationsManager Express

Direct stationselect service in7832 for transfercalls


PassedIP Phone A ->Unified CME 1-> IP Phone B ->Unified CME 1-> SIP Trunk ->Unified CME 2-> IP Phone C ->Unified CME 2-> IP Phone D

Verify active call status areshown the exact count forCisco IP Conference Phone7832 when primary CiscoUnified CommunicationsManager Express reloadedunexpectedly

Active callstatus in 7832when CMRprimary routerreloads



Verify sender and receivercodecs are shown in CiscoIP Conference Phone 7832when Cisco IP Phone 78xxand 88xx are involved inconference with g.729 andg.711 codec configured

Sender andreceiver codecstatus in 7832when differentcodecsconfigured


PassedIP Phone D ->Unified CM ->SIP Trunk ->Unified CME ->IP Phone A ->Unified CME ->IP Phone B

Verify Cisco IP ConferencePhone 7832 is able tocommunicate with otherparticipants in hardwareconference once swap takenplace and doing conferenceagain

Hardwareconference in7832 after swapsession


PassedIP Phone A ->Unified CME ->IP Phone B ->Unified CME ->IP Phone C ->Unified CME ->IP Phone D

Verify Cisco IP Phone 88xxis able to join into themeeting with Cisco IPConference Phone 7832 byre-dialling the meetingnumber through redialconfigured in enhanced linemode

Join into themeet meconference byredialing viaELM




PassedIP Phone A ->Unified CME ->IP Phone B ->Unified CME ->IP Phone C ->Unified CME ->IP Phone D ->Unified CME ->IP Phone E

Verify meet me conferencecontinous in Cisco IPConference Phone 7832when router reloadedunexpectedly

Reload routerwhen all phonesare in meet meconference


Cisco TelePresence Video Communication ServerDefectsStatusCall

ComponentFlow


PassedNAVerify whetherJapaneselanguagepackage can beuploaded inCiscoExpressway-Coreafter installingthe applicationvia ESXi 6.5VMware

Check uploadingJapaneselanguagepackage to CiscoExpressway-Cafter installingvia ESXi 6.5VMware

UCJ12.5SPH1S.VCS.G.001

PassedNAVerify whetherUser InterfaceMenu Changesis reflected inCiscoTelePresenceVideoCommunicationServer webUser InterfaceUnderMaintenancetab afteruploading theJapaneselanguagepackage

Check CiscoVCS web UI forUser InterfaceMenu Changesin Maintenancetab afteruploadingJapaneselanguagepackage



Test Results SummaryCisco TelePresence Video Communication Server

PassedDX80->Expressway-E->Expressway-C->UnifiedCM->Expressway-C->Expressway-E->DX70

Verify whethersecure Videocall can beestablishedbetween CiscoWebex DX80and CiscoWebex DX70both registeredin CiscoUnifiedCommunicationsManager viaMobile andRemote Access

Check secureVideo callestablishedbetween DX80and DX70 bothregistered inUnified CM viaMRA


PassedNAVerify whetherAccess Policysupport optionis available forMobile andRemote Accessendpoints afterupgrading toX8.10.3

Check AccessPolicy supportfor MRAendpoints afterupgrading toX8.10.3


PassedCisco WebexRoom Kit ->Expressway-E->Expressway-C->UnifiedCM-> SipTrunk->CiscoVCS->DX70Cisco WebexRoom Kit ->Add->Expressway-E->Expressway-C->UnifiedCM-> SipTrunk->Cisco VCS->DX80

Verify whetherMultisiteConference canbe initiatedfrom CiscoWebex RoomKit registeredin CiscoUnifiedCommunicationsManager viaMobile andRemote Accessamong CiscoWebex DX70,Cisco WebexDX80 bothregistered inCiscoTelePresenceVideoCommunicationServer as Sipendpoints

InitiateMultisiteConference fromCisco WebexRoom Kitregistered inUnified CM viaMRA amongCisco VCSregisteredendpoints




PassedNATo verify thatCisco WebexRoom Kit is inregistered statein CiscoUnifiedCommunicationsManager evenprimary CiscoExpressway-Egoes down viaMobile andRemote Access

Checkregistrationstatus of CiscoWebex RoomKit whenprimaryExpressway-Edown via MRA


PassedCisco WebexRoom KitPlus->Expressway-E(Secondary)->Expressway-C->UnifiedCM->MX300G2

To verify thatuser is able tocontinue thevideo callbetween CiscoWebex RoomKit Plus &CiscoTelePresenceMX300 G2both registeredin CiscoUnifiedCommunicationsManager evenprimary CiscoExpressway-Egoes down viaMobile andRemote Access

Check the videocall status whenprimaryExpressway-Edown via MRA




PassedCisco WebexRoom KitPlus ->Expressway-E(Secondary)->Expressway-C(Secondary)-> UnifiedCM->SX20Quick Set

To verify thatuser is able tocontinue thepresentationsharing in videocall betweenCisco WebexRoom Kit Plus& CiscoTelePresenceSX20 QuickSet bothregistered inCisco UnifiedCommunicationsManager evenprimary CiscoExpressway-E& CiscoExpressway-Cgoes down viaMobile andRemote Access

Check the statusof presentationsharing in videocall whenprimaryExpressway-E&Expressway- Cdown via MRA


PassedNAVerify whetherHalfwakeJapanese textcan beuploaded inCisco WebexDX80 via WebUser Interface

Check uploadingHalfwakeJapanese text inDX80 via WebUI


PassedNAVerify whetherHalfwakeJapanese textcan beuploaded inCisco WebexRoom Kit Plusvia Web UserInterface

Check uploadingHalfwakeJapanese text inCisco WebexRoom Kit Plusvia Web UI




PassedNAVerify whetherCiscoProximityIndicator isremoved in theOn-ScreenDisplay ofCisco WebexDX80 inJapaneseenvironmentafter upgradingwith the latestCollaborationendpointsoftware.

Check ProximityIndicator notdisplayed inOSD of DX80 inthe latest CEsoftwarewith theEndpoint inJapaneseenvironment


PassedNAVerify whetherCiscoProximityIndicator isremoved in theCiscoTelePresenceTouch 10 ofCisco WebexRoom Kit Plusin Japaneseenvironmentafter upgradingwith the latestCollaborationendpointsoftware

Check ProximityIndicator notdisplayed inTouch 10 ofCisco WebexRoom Kit Plusin the latest CEsoftwarewith theEndpoint inJapaneseenvironment


PassedNAVerify whetherMicrophoneicon added inthe HomeScreen of CiscoWebex RoomKit Plus can bepreviewed inthe In-RoomControl editor

PreviewMicrophone iconadded in Homescreen of CiscoWebex RoomKit Plus in theIn-RoomControleditor




PassedDX80->UnifiedCM->MX200 G2DX80->Transfer->UnifiedCM-> SipTrunk->Cisco VCS->MX300 G2->Forward AllCalls->Zone->Expressway-C->DX70

Verify whetherVideo callbetween CiscoWebex DX80and CiscoTelePresenceMX200 G2both registeredin CiscoUnifiedCommunicationsManager can betransferred toForward AllCalls enabledCiscoTelePresenceMX300 G2registered inCiscoTelePresenceVideoCommunicationServer to CiscoWebex DX70registered inCiscoExpressway-Core

Transfer theVideo call fromDX80 toForward AllCalls enabledMX300 G2 toDX70 registeredin CiscoExpressway-C




PassedCisco WebexRoom KitPlus (PairedwithProximity forAndroid)(H323Presentationsharing)->CiscoVCS->MX300G2 (SipEndpoint)

Verify whetherPresentationScreen can beviewed fromCiscoProximity forAndroid pairedwith CiscoWebex RoomKit Plusregistered inCiscoTelePresenceVideoCommunicationServer as H323endpoint withH323 JapaneseID during aVideo call withCiscoTelePresenceMX300 G2registered inCiscoTelePresenceVideoCommunicationServer as Sipendpoint

ViewPresentationContent inProximity forAndroid pairedwith CiscoWebex RoomKit Plusregistered inCisco VCS asH323 Endpointwith JapaneseH323 ID




PassedSX80Codec->UnifiedCM-> SipTrunk->Cisco VCS->MX200 G2DX70->Cisco VCS->Zone->UnifiedCM-> SX80Codec SX80Codec->Merge(longduration)->UnifiedCM->MRGL-> SipTrunk->MCU 5320

Initiate CiscoTelePresenceMCU 5320long durationAdhocconferencefrom CiscoTelePresenceSX80 Codecregistered inCisco UnifiedCommunicationsManageramong CiscoTelePresenceMX200G2 andCisco WebexDX70 bothregistered inCiscoTelePresenceVideoCommunicationServer

Initiate MCU5320 longduration Adhocconference fromSX80 Codecwith Cisco VCSregisteredEndpoints


PassedSX80 Codec(BFCPPresentationsharing)->UnifiedCM-> DX80

Verify whetherBinary FloorControlProtocolenabledPresentationcontent can beshared fromCiscoTelePresenceSX80 Codec toCisco WebexDX80 bothregistered inCisco UnifiedCommunicationsManager

Check BFCPenabledPresentationsharing fromSX80 Codec toDX80 registeredin Unified CM




PassedNAVerify whetherPNG image canbe uploaded asHalfwakeBrand Logo forCiscoTelePresenceMX300 G2registered inCisco UnifiedCommunicationsManager viaWeb UserInterfacesuccessfully

Check uploadingPNG image asHalfwake BrandLogo forMX300G2 via Web UI


PassedNAVerify whetherthe user canremove thedefault textmessage whichis displayedwhen CiscoTelePresenceMX300 G2 inHalfwake stateusing CLIcommand

Remove thedefault textmessagedisplayed fromMX300 G2when it is inHalfwake stateusing xAPIcommands


PassedNAVerify whetheruser can uploadBackgroundImage in CiscoTelePresenceMX300 G2which isdisplayed whenthe system is inHalfwake state,endpoint is inJapaneseenvironment

UploadBackgroundImage forHalfwake stateMX300 G2which is inJapaneseEnvironment




PassedNAVerify whetheruser can uploadBranding Logoin CiscoTelePresenceMX300 G2which isdisplayed whenthe system is inAwake state,endpoint is inJapaneseenvironment

UploadBrandingLogo for Awakestate MX300 G2which is inJapaneseEnvironment


PassedNAVerify whetheruser can uploada customizedJapanese textmessagethrough WebUser Interfacewhen CiscoTelePresenceSX20 QuickSet inHalfwakestate andJapanese locale

CustomizedOSD HalfwakeJapanese TextMessage inSX20 Quick Set


PassedNAVerify whetheruser can accessserviceactivation pageby providingtheadministratorcredentials inCiscoTelePresenceTouch 10 ofCiscoTelePresenceMX300 G2

Access ServiceActivation pagein Touch 10" byproviding theAdmincredentials inMX300 G2




PassedNAVerify whetherCiscoProximity iconis not displayedin both CiscoTelePresenceTouch 10" andOn-ScreenDisplay ofCiscoTelePresenceMX300 G2when enabledeither in CiscoUnifiedCommunicationsManager or inWeb UserInterface

Cisco ProximityIndicatorremoval fromTouch 10" andOSD of MX300G2


PassedNAVerify whetherCiscoTelePresenceMX300G2getsresets onchanging theserviceactivation fromCiscoTelePresenceTouch 10

Change Serviceactivation fromTouch 10" ofMX300 G2


PassedNAVerify whetherCiscoTelePresenceSX20 QuickSet gets resetson changing theserviceactivation fromCiscoTelePresenceTouch 10

Change Serviceactivation fromTouch 10" ofSX20 Quick Set




PassedNAVerify whetherPNG image canbe uploaded asAwake BrandLogo for CiscoTelePresenceMX200 G2 viaWeb UserInterfacesuccessfully

Check uploadingPNG image asAwake BrandLogo forMX200G2 via Web UI


PassedNAVerify whetherJapanese TextCustomizationfor CiscoTelePresenceMX200 G2 viaWeb UserInterface workssuccessfully inHalfwake State

Check providingJapaneseCustomText inHalfwake Statefor MX200 G2via Web UI


PassedNAVerify whetherAdmin Settingslockdown inCiscoTelePresenceMX200 G2registered inCisco UnifiedCommunicationsManager workssuccessfully inJapaneseEnvironment

Check AdminSettingslockdown in UIwith JapaneseEnvironment


PassedNAVerify whetherCiscoTelePresenceMX200 G2resets whenchanging thedeviceactivation fromCisco UnifiedCommunicationsManager toCiscoTelePresenceVideoCommunicationServer

Check devicereset during CallServicere-provisioning




PassedNAVerify whetherLanguage iconadded in theHome Screenof CiscoTelePresenceMX200 G2registered inCisco UnifiedCommunicationsManager can bepreviewed inthe In-RoomControl editorwith JapaneseEnvironment

PreviewLanguage iconadded in Homescreen ofMX200 G2 inthe In-RoomControl editorwith JapaneseEnvironment


PassedMX200 G2,DX70, SX10Quick Set,SX80Codec,CiscoWebex RoomKit ->Unified CM-> Sip Trunk-> CMS

Verify whetherMute remoteparticipants inCisco MeetingServer hostedMeet meconference(ActiveControl) amongCiscoTelePresenceMX200 G2,Cisco WebexDX70, CiscoTelePresenceSX10 QuickSet, CiscoTelePresenceSX80 Codecand CiscoWebex RoomKit allregistered inCisco UnifiedCommunicationsManager workssuccessfully

Check Muteremoteparticipants inCMS hostedMeet meconference(Active Control)call betweenMX200 G2,DX70, SX10Quick Set, SX80Codec and CiscoWebex RoomKit all registeredin Unified CM




PassedNAVerify whetherJapanese(Hiraghana/Katagana)users aredisplayed inCiscoTelePresenceMX200 G2registered withCiscoTelePresenceVideoCommunicationServersuccessfully

Check Japanese(Hiraghana/Katagana)in MX200 G2registered inCisco VCS


PassedCisco WebexRoom KitPlus -> CiscoVCS -> SipTrunk ->Unified CM-> MX200G2 (CFA) ->Unified CM-> Sip Trunk-> CiscoVCS-> DX70

Verify whethercall from CiscoWebex RoomKit Plusregistered inCiscoTelePresenceVideoCommunicationServer to CiscoTelePresenceMX200 G2registered inCisco UnifiedCommunicationsManager getsforwarded toDX70registered inCiscoTelePresenceVideoCommunicationServer viaCollaborationEdge

Set Call ForwardAll in MX200G2 registered inUnified CM toDX70 registeredin Cisco VCSviaCollaborationEdge




PassedDX70 ->CiscoVCS ->MX200 G2(SipEndpoint)MX200 G2(SipEndpoint)(Transfer)-> CiscoVCS-> SX80Codec (H323Endpoint)

Check whethercall transferbetween CiscoTelePresenceMX200 G2registered asSip endpoint &CiscoTelePresenceSX80 Codecregistered asH323 endpointin CiscoTelePresenceVideoCommunicationServer

Transfer the callfromMX200G2registered as SipEndpoint toSX80 Codecregistered asH323 Endpointin Cisco VCS


PassedMX200 G2(H323Endpoint) ->CiscoVCS ->SX80 Codec(SipEndpoint)MX200 G2(H323Endpoint)(Add)(Hold/Resume)-> CiscoVCS-> SX20Quick Set(SipEndpoint)

Check whethermultisiteconference ofCiscoTelePresenceMX200 G2registered asH323 endpointand CiscoTelePresenceSX80 Codec,SX20 QuickSet registeredas Sipendpoints inCiscoTelePresenceVideoCommunicationServer workssuccessfully

Multisiteconference ofMX200 G2registered asH323 Endpointusing SX80Codec, SX20Quick Setregistered as SipEndpoints inCisco VCS




PassedMX200 G2-> UnifiedCM -> SX80Codec

Verify whethercall betweenCiscoTelePresenceMX200G2 andCiscoTelePresenceSX80 Codecregistered inPrimary CiscoUnifiedCommunicationsManagerfallback toSecondaryCisco UnifiedCommunicationsManager duringPower Reboot

Check Failoverduring PowerReboot ofPrimary UnifiedCM withJapaneseEnvironment


PassedNACheck whetherPNG imageuploaded asCustom BrandLogo for CiscoWebex RoomKit reflects inOn-ScreenDisplay whensystem goes toHalfwake state

Check uploadingPNG Image forLogo in CiscoWebex RoomKit for HalfwakeState


PassedNACheck whetherCiscoProximity Iconvisible inOn-ScreenDisplay ofCisco WebexRoomKitwheniOS devicepaired viaCiscoProximity

Check for CiscoProximityIndicator onOSD of CiscoWebex RoomKit byconnecting iOSdevice viaProximity




PassedNACheck whetheruser able to seeCisco WebexRoom KitIn-RoomControlspreview byclickingPreviewCurrentConfigurationIcon availablein Web UI

Check In-RoomControlsPreview optionin Cisco WebexRoom Kit


PassedNACheck whetherText uploadedCustom Textfield for AwakeState of CiscoWebex DX70reflects inOn-ScreenDisplay whensystem goes toAwake state

Check OSD ofDX70 forCustom Textuploadedthrough Web UIof DX70 forAwake State


PassedNACheck whetherCiscoProximity Iconvisible inOn-ScreenDisplay ofCisco WebexDX70 wheniOS devicepaired viaCiscoProximity

Check for CiscoProximityIndicator onOSD of DX70by connectingiOS device viaProximity




PassedDX70 (SharePresentation)-> UnifiedCM -> CiscoWebex RoomKit

Check whetherRecord Iconadded toIn-Call Screenvia In-RoomControlsreflects inOn-ScreenDisplay ofCisco WebexDX70 whilesharingpresentation toCisco WebexRoom Kit bothregistered inCisco UnifiedCommunicationsManager inJapaneseEnvironment

Check whetherRecord Iconadded to In-CallScreen of DX70reflects in OSDwhen sharingpresentation toCisco WebexRoom Kit inJapaneseEnvironment


PassedNAVerify whetherafter clickingon Deviceactivation loginprompt willdisplayOn-Screen inPhoenix Activemode in CiscoTelePresenceSX10 QuickSet

After clicking onDeviceactivation loginprompt willdisplayOn-Screen inPhoenix Activemode in SX10Quick Set


PassedNAVerify whetherCustom text orpassword inputprompt displaysin CiscoTelePresenceSX10 QuickSet

Custom text orpassword inputprompt isdisplayed inSX10 Quick Set




PassedSX10 (pairedwithwindows) ->Cisco VCS->DX80SX10 (pairedwithwindows)->SharePresentation

Verify whetherSharingpresentationfrom CiscoTelePresenceSX10 QuickSet paired withWindows viaCiscoProximity toCisco WebexDX80 bothregistered asH323 endpointsin CiscoTelePresenceVideoCommunicationServer

Presentationsharing fromSX10 Quick Setpaired withWindows viaProximity toDX80 bothregistered asH323 Endpointsin Cisco VCS


PassedSX10 QuickSet ->Unified CM-> MX200G2

Verify whetherimporting usersfrom CiscoTelePresenceManagementSuitePhonebook andmake Videocall betweenCiscoTelePresenceSX10 QuickSet and CiscoTelePresenceMX200 G2both registeredwith SipContactMethod

Import usersfromCisco TMSPhonebook andmake Video callbetween SX10Quick Set andMX200 G2 bothregistered withSip Contactmethod




PassedSX10 QuickSet (EMUser)->CiscoVCS->DX70SX10 QuickSet (PairedWithWindows )->Cisco VCS->DX70SX10 QuickSet(PairedWithWindows)->CiscoVCS ->Transfer->Cisco WebexRoom KitPlus

Verify whetherVideo callbetween CiscoTelePresenceSX10 QuickSet logged asExtensionMobility userwhich is pairedwith Windowsusing CiscoProximity toCisco WebexDX70 andVideo call canbe transferredfrom CiscoTelePresenceSX10 QuickSet to CiscoWebex RoomKit Plus allregistered asH323 endpointsin CiscoTelePresenceVideoCommunicationServer

Make a Calltransfer fromSX10 Quick Setlogged asExtensionMobility userwhich is pairedwith Windowsusing CiscoProximity toCisco WebexRoom Kit Plusboth registeredas H323Endpoints inCisco VCS


PassedCisco WebexRoom Kit ->Unified CM->DX70CiscoWebex RoomKit (Add)(SharePresentation)-> UnifiedCM -> SX80Codec

Check whetherpresentationcan be sharedfrom secondmonitor ofCisco WebexRoom Kit inmultisiteconferencewithCiscoTelePresenceSX80 Codecand CiscoWebex DX70all registered inCisco UnifiedCommunicationsManager

Sharepresentationfrom Secondmonitor of CiscoWebex RoomKit in MultisiteConference




PassedDX70 ->Unified CM-> Sip Trunk-> CiscoVCS-> CiscoWebex RoomKit SX80Codec ->Barge DX70(SharePresentation)

Check whetherpresentationsharing fromCisco WebexDX70 which isin shared linewith CiscoTelePresenceSX80 Codecregistered inCisco UnifiedCommunicationsManager toCisco WebexRoom Kitregistered inCiscoTelePresenceVideoCommunicationServer workssuccessfully

Sharepresentationfrom DX70which is inShared line withSX80 Codecregistered inUnified CM toCisco WebexRoom Kitregistered inCisco VCS


PassedSX80 Codec-> UnifiedCM -> DX70(EM Profile)-> CFA ->Unified CM-> Sip Trunk-> CiscoVCS-> CiscoWebex RoomKit

Check whethercall from CiscoTelePresenceSX80 Codec toCall ForwardEnabledExtensionMobilityProfile of CiscoWebex DX70registered inCisco UnifiedCommunicationsManagerconnects toCisco WebexRoom Kitregistered inCiscoTelePresenceVideoCommunicationServer

Set Call ForwardAll in EMProfile of DX70to Cisco WebexRoom Kitregistered inCisco VCS




PassedNAVerify whetheroption keys forregisteringTelePresenceRoom Systemscan be installedsuccessfully inCiscoExpressway-Edge

Install RoomSystems optionkeys in CiscoExpressway-E

UCJ12.5SPHIIS.VCS.G.001

PassedNAVerify whetheradvancedparameterCMSload BalancingMode isavailable forthe zonecreated forCisco MeetingServer in CiscoExpressway-Core

Advancedparameterconfiguration forCMS loadbalancing inCiscoExpressway-C


PassedMX300G2(Sip) ->Expressway-C-> Zone ->MeetingServer

Verify whetherCiscoTelePresenceMX300 G2registered asSip Endpoint inCiscoExpressway-Corecan join theconference bydialing thespace ID ofCisco MeetingServer

Joining theconference bydialing the spaceID of MeetingServer fromMX300 G2registered inCiscoExpressway-C asSip endpoint




PassedMX200 G2-> CiscoVCSCluster 1 ->Zone ->Cisco VCSCluster 2 ->SX10 QuickSet

Verify theRound TripDelay valueduring videocall betweenCiscoTelePresenceMX200G2 andCiscoTelePresenceSX10 QuickSet registeredin differentCiscoTelePresenceVideoCommunicationServer Clusters

Increased RoundTrip Delay valueduring video callbetweenMX200G2 and SX10Quick Set in anIntercluster VCScall


PassedMX200 G2->Expressway-E->Expressway-C-> Zone ->Unified CM->Expressway-C->Expressway-E-> DX70

Verify call canbe recordedbetween CiscoTelePresenceMX200G2 andCisco WebexDX70 bothregistered inCisco UnifiedCommunicationsManager viaMobile andRemote Access(Built-in-Bridge)

Call RecordingbetweenMX200G2 and DX70both registeredin Unified CMvia MRA


PassedCisco WebexRoom Kit ->Expressway-E->Expressway-C-> UnifiedCM ->Expressway-C->Expressway-E-> CiscoWebex RoomKit Plus

To verify thatuser is able torecord thevideo callbetween CiscoWebex RoomKit & CiscoWebex RoomKit Plus bothare registered inCisco UnifiedCommunicationsManager viaMobile andRemote Access

Initiate callrecording forvideo callbetween CiscoWebex RoomKit & CiscoWebex RoomKit Plus bothregistered inUnified CM viaMRA




Passed78xx ->Expressway-E->Expressway-C-> UnifiedCM ->Expressway-C->Expressway-E-> DX80

To verify thatuser is able torecord the callbetween CiscoIP Phone 78xx&CiscoWebexDX80 both areregistered inCisco UnifiedCommunicationsManager viaMobile andRemote Access

Recording callbetween 78xxand DX80registered inUnified CM viaMRA


PassedCisco WebexRoom KitPlus ->Expressway-E->Expressway-C(Secondary)-> UnifiedCM

Verify failoverregistration ofCisco WebexRoom Kit Pluswhen PrimaryCiscoTelePresenceVideoCommunicationServerExpressway-Coreoreis down

Check FailoverRegistration ofCisco WebexRoom Kit Pluswhen PrimaryExpressway-C isdown


PassedCisco WebexRoom KitPlus (768Kbps) (PairedwithWindows)(WirelessSharing) ->Expressway-E->Expressway-C-> UnifiedCM -> SipTrunk ->CiscoVCS ->SX20 QuickSet

Verify whetherCisco WebexRoom Kit Plusregistered inCisco UnifiedCommunicationsManager viaMobile andRemote Accesscan performWirelessSharing viaCiscoProximity withdifferentbandwidth callrate to CiscoTelePresenceSX20 QuickSet registeredin CiscoTelePresenceVideoCommunicationServer

DifferentBandwidth Callrate duringWireless Sharingfrom CiscoWebex RoomKit Plusregistered inUnified CM viaMRA to SX20Quick Setregistered inCisco VCS




PassedCisco WebexRoom KitPlus ->Expressway-E->Expressway-C-> UnifiedCM ->MX200 G2Cisco WebexRoom KitPlus -> Add->Expressway-E->Expressway-C-> UnifiedCM -> SX20Quick Set

Verify whetherMultisiteConference canbe initiatedfrom CiscoWebex RoomKit Plusregistered inCisco UnifiedCommunicationsManager viaMobile andRemote Accessamong CiscoTelePresenceMX200 G2,CiscoTelePresenceSX20 QuickSet bothregistered inCisco UnifiedCommunicationsManager

InitiateMultisiteConference fromCisco WebexRoom Kit Plusregistered inUnified CM viaMRA


PassedCisco WebexRoom KitPlus -> CiscoExpressway-C-> DX70Cisco WebexRoom KitPlus -> Add-> CiscoExpressway-C-> MX200G2 CiscoWebex RoomKit Plus ->Hold/Resume

Verify whetherHold andResume duringMultisiteConferencefrom CiscoWebex RoomKit Plusinitiated amongCisco WebexDX70 andCiscoTelePresenceMX200 G2 allregistered inCiscoTelePresenceVideoCommunicationServerExpressway-Coreworkssuccessfully

Hold andResume theMultisiteConference fromCisco WebexRoom Kit Plusregistered inCiscoExpressway-C




PassedCisco WebexRoom KitPlus, SX20Quick Set &MX200 G2(Meet MeConference)->Expressway-E->Expressway-C-> UnifiedCM -> SipTrunk ->MCU 5320

To verify thatuser is able tojoin Meet MeConferenceusing CiscoTelePresenceMCU 5320from CiscoWebex RoomKit Plusregistered withCisco UnifiedCommunicationsManager viaMobile andRemote Access

Join Meet MeConference fromCisco WebexRoom Kit Plusregistered withUnified CM viaMRA


PassedCisco WebexRoom KitPlus ->Unified CM-> MX200G2 MX200G2(AmplifiedVisuals) ->Add ->MRGL ->Unified CM-> SIP Trunk->MCU5310-> SX20Quick SetMX200 G2->Merge

Verify whethernew highvisibilityincoming callalert iswitnessed bothin On-ScreenDisplay andTouch 10 ofCiscoTelePresenceMX200 G2during AdhocConference viaCiscoTelePresenceMCU 5310among CiscoWebex RoomKit Plus andCiscoTelePresenceSX20 QuickSet allregistered inCisco UnifiedCommunicationsManager

AmplifiedVisual incomingcalling alert inOSD and Touch10 ofMX200G2under JapaneseEnvironment




PassedCisco TMS-> UnifiedCM ->MX300 G2and SX20Quick Set(OBTPConference)

Verify whethermeeting can besnoozed fromthe On-ScreenDisplay ofCiscoTelePresenceMX300 G2 forthe initiatedOne Button toPushconferencescheduled viaCiscoTelePresenceManagementSuite, endpointin JapaneseEnvironment

Initiate OBTPconference fromMX300 G2 withSX10 Quick Setand snooze inthe MeetingReminder forMX300 G2conferencescheduled byCisco TMS,endpoints inJapaneseEnvironment


PassedCisco WebexRoom KitPlus ->Unified CM-> MX200G2

Verify whetherMicrophoneoverloaddiagnosticmessage isobserved fromCiscoTelePresenceTouch 10 ofCiscoTelePresenceMX200 G2while in callwith CiscoWebex RoomKit Plus underJapaneseEnvironment

Microphoneoverloaddiagnosticmessage alert inTouch 10 ofMX200 G2under JapaneseEnvironment




PassedMX200 G2-> UnifiedCM Cluster 1-> TLS SIPTrunk ->Unified CMCluster 2 ->Cisco WebexRoom KitPlus

Verify whethersecure videocall can beestablishedbetween CiscoTelePresenceMX200 G2registered inCisco UnifiedCommunicationsManagerCluster 1 andCisco WebexRoom Kit Plusregistered inCisco UnifiedCommunicationsManagerCluster 2 underJapaneseEnvironment

SecureInterclustervideo callbetweenMX200G2 and CiscoWebex RoomKit Plus underJapaneseEnvironment


PassedCisco WebexRoom KitPlus ->Unified CM-> MX200G2 CiscoWebex RoomKit Plus(Add) ->Unified CM-> SIP Trunk-> MRGL ->MCU5320 ->DX80 CiscoWebex RoomKit Plus ->Merge

Verify whetherPeople Count inCisco WebexRoom Kit Pluswhile in anAdhocConferenceamong CiscoTelePresenceMX200G2 andCisco WebexDX80 viaCiscoTelePresenceMCU 5320registered inCisco UnifiedCommunicationsManager

People count inCisco WebexRoom Kit Pluswhile in anAdhocconferenceamong MX200G2 and DX80via MCU 5320




PassedCisco WebexRoom KitPlus (BFCP)(Paired withWindows) ->Unified CM-> DX80Cisco WebexRoom KitPlus (BFCP)(WirelessSharing) ->Unified CM-> DX80

Verify whetherBinary FloorControlProtocolenabledWirelesspresentationsharing worksfrom CiscoWebex RoomKit Plus pairedwith Windowsvia CiscoProximityregistered inCisco UnifiedCommunicationsManager

Check BFCPenabledWirelessPresentationSharing fromCisco WebexRoom Kit Plusregistered inUnified CM


PassedMX200 G2-> PrimaryCiscoVCS ->Cisco WebexRoom KitPlus(NetworkFailure)MX200G2 ->SecondaryCiscoVCS ->Cisco WebexRoom KitPlus

Verify whetherCiscoTelePresenceMX200G2 andCisco WebexRoom Kit Plusregistered inPrimary CiscoTelePresenceVideoCommunicationServer fallbackto SecondaryCiscoTelePresenceVideoCommunicationServer duringNetworkReboot underJapaneseEnvironment

Check Failoverduring NetworkReboot ofPrimary CiscoVCS withJapaneseEnvironment




PassedSX20 QuickSet ->Unified CM-> MX200G2 (EM user)(Paired withAndroid )MX200 G2(EM user)(Paired withAndroid) ->Call Transfer-> UnifiedCM -> SIPTrunk ->VCS ->SX80Codec

Verify whethercall can betransferredfrom CiscoTelePresenceMX200 G2logged asExtensionMobility userpaired withAndroid viaCiscoProximityregistered inCisco UnifiedCommunicationsManager toCiscoTelePresenceSX80 Codecregistered inCiscoTelePresenceVideoCommunicationServer, while incall with CiscoTelePresenceSX20 QuickSet underJapaneseEnvironment

Call transferfromMX200G2logged as EMuser paired withAndroid viaProximity toSX80 Codecunder JapaneseEnvironment




PassedMX200 G2(Paired withProximity forAndroid) ->CiscoVCS ->Cisco WebexRoom KitPlus (H323PresentationSharing)

Verify whetherPresentationContent can beviewed fromCiscoProximity forAndroid pairedwith CiscoTelePresenceMX200 G2registered inCiscoTelePresenceVideoCommunicationServer as H323Endpoint withH323 JapaneseID during avideo call withCisco WebexRoom Kit Plusregistered inCiscoTelePresenceVideoCommunicationServer as SIPEndpoint

ViewPresentationContent inProximity forAndroid pairedwith MX200 G2registered inCisco VCS asH323 Endpointwith JapaneseH323 ID


PassedNACheckWhetherin Japaneseenvironmenttapping 'Audioonly' whileinitiating callfrom CiscoWebex DX80to CiscoTelePresenceSX10 QuickSet sets the callrate to 64kbpsworkssuccessfully

In Japaneseenvironmenttapping 'Audioonly' sets the callrate to 64 Kbpsin SX10 QuickSet




PassedNAVerifyWhetherMicrophonecheckmoved tothe issues anddiagnosticspage in CiscoTelePresenceSX10 QuickSet displayssuccessfully.

Microphonecheck moved tothe issues anddiagnostics pagein SX10 QuickSet


PassedNAVerify whethermicrophoneoverloaddiagnosticsmessage willshow up if wehave detected a"massiveclipping" of themic signal inCisco WebexDX80 workssuccessfully

Microphoneoverloaddiagnosticsmessage willshow up inDX80 if we havedetected a"massiveclipping" of themic signal


PassedNACheckWhetherin Japaneseenvironmentresume theupgrade via the'About thisdevice' page inCisco WebexDX80 workssuccessfully

Resume theupgrade via the'About thisdevice' page inDX80 withJapaneseEnvironment




PassedDX80 (EMuser) ->Unified CM-> DX70DX80 (PairedWith Mac) ->Unified CM-> DX70DX80 (PairedWith Mac) ->Unified CM->Transfer ->MX200 G2

VerifyWhetherVideo callbetween CiscoWebex DX80logged asExtensionMobility userwhich is pairedwith Mac viaCiscoProximity toCisco WebexDX70 andvideo call canbe transferredfrom CiscoWebex DX80to CiscoTelePresenceMX200 G2 allregistered inCisco UnifiedCommunicationsManager

Call transferfrom DX80logged asExtensionMobility userwhich is pairedwith Mac viaProximity toMX200 G2 bothregistered inUnified CM


PassedNAVerify whetherlogs archivecan bedownloaded inCisco WebexDX80 inJapaneseenvironmentafter upgradingtoCollaborationEndpointsoftware 9.3.X

Checkdownloadinglogs archive inDX80 inJapaneseenvironmentafter upgradingto CE software9.3.X




PassedCisco TMS-> UnifiedCM ->DX70,MX300 G2and CiscoWebex RoomKit (OBTPConference)

Check whetherOne Button ToPush Snoozereflects inCisco WebexDX70 when aOne Button ToPush meetinginitiated amongCiscoTelePresenceMX300G2 andCisco WebexRoom Kit viaCiscoTelePresenceManagementSuite allregistered inCisco UnifiedCommunicationsManager

Initiate OBTPConference fromDX70 amongMX300 G2 andCisco WebexRoom Kit andcheck OBTPSnooze/RemindLaternotification inDX70 underJapaneseEnvironment


PassedNACheck whetherMirroredSelfviewoptions isavailable inCisco WebexDX70 inJapaneseEnvironment

Check MirroredSelfview optionsin Web UI ofDX70 inJapaneseEnvironment


PassedNACheck whetherusers canCustom theCall Rate usingCustom CallRate Editoption availablein CiscoTelePresenceTouch 10 ofCisco WebexRoom Kit

Check forCustomCall rateselection optionin Touch 10directly paired toCisco WebexRoom Kit




PassedNACheck whetherchangesreflecting inIssues &Diagnosticsoption in CiscoWebex DX70after upgradingtoCollaborationEndpointSoftware 9.3.X

Check for thechanges in Issues& Diagnosticsoption ofSettings inDX70


PassedNAVerify forMicrophoneStatus of CiscoWebex RoomKit by clickingon MicrophoneCheck option inIssues &DiagnosticsSettings afterupgrading toCollaborationEndpoint 9.3.X

PerformMicrophoneCheck featurefor Cisco WebexRoom Kit viaIssues &Diagnosticsoption in Touch10


PassedNACheck whetherUpgrade Nowoption isavailable inCisco WebexDX70 inJapaneseEnvironmentfor postponedsoftwareupgrade viaCiscoTelePresenceManagementSuite

Check forUpgrade Nowoptionavailability inDX70 forPostponedSoftwareupgrade inJapaneseEnvironment




PassedDX70(Camera LidClosed) ->Unified CM-> CiscoWebex RoomKit

Check forVideo TransitInformation inCisco WebexDX70 (CameraLid Closed)while in a callwith CiscoWebex RoomKit bothregistered inCisco UnifiedCommunicationsManager

Check the VideoTransitInformation inDX70 (CameraLid Closed)while in a callwith CiscoWebex RoomKit


PassedDX70 ->CiscoVCS ->MX300 G2

Check whetherchanges madefor SelfviewPicture InPicture positionof CiscoWebexDX70 fromWeb UIreflecting inOn-ScreenDisplay whileon call withCiscoTelePresenceMX300 G2registered inCiscoTelePresenceVideoCommunicationServer

Change SelfviewPIP position ofDX70 fromWebUI and checkfrom reflectionin OSD of DX70while in callwith MX300 G2




PassedCisco WebexRoom Kit ->Unified CM-> DX70Cisco WebexRoom Kit(Add) ->Unified CM-> MX300G2

Check whetherCamera Presetcreated in mainprofile of CiscoWebex RoomKit availablewhen multisiteconferenceinitiated fromExtensionMobility Userof CiscoWebexRoom Kit withCisco WebexDX70 andCiscoTelePresenceMX300 G2registered inCisco UnifiedCommunicationsManager

Check forCamera Presetposition in CiscoWebex RoomKit EM user byinitiatingmultisiteconference


PassedCisco WebexRoom Kit ->Unified CM-> DX70(Camera LidClosed)

Check forVideoReceivingInformation inCiscoTelePresenceTouch 10 ofCisco WebexRoomKitwhilein a call withCisco WebexDX70 (CameraLid Closed)both registeredin CiscoUnifiedCommunicationsManager

Check the VideoInformation inCisco WebexRoom Kit whilein call withDX70 (CameraLid Closed)


PassedNACheck forChanges in theLayout of WebUI of CiscoWebex RoomKit afterupgrading toCollaborationEndpoint 9.3.X

Check forchanges in WebUI of CiscoWebex RoomKit afterUpgrading to CE9.3.X




PassedNACheckfunctionality ofRevert Buttonin Web UI ofCisco WebexRoom Kit bychangingNetworkServices fromSIP to H323after UpgradingtoCollaborationEndpoint 9.3.X

Checkfunctionality ofRevert Button inWeb UI of CiscoWebex RoomKit by changingNetworkServices afterupgrading to CE9.3.X


PassedCisco WebexRoom Kit ->Cisco VCSSite - 1 ->Zone ->Cisco VCSSite - 2 ->DX70 CiscoWebex RoomKit (Add) ->Cisco VCSSite - 1 ->Zone ->Cisco VCSSite - 2 ->MX300 G2

Check initiatinga multisiteConferencefrom CiscoWebex RoomKit registeredas H323Endpoint inCiscoTelePresenceVideoCommunicationServer Site - 1with CiscoWebex DX70and CiscoTelePresenceMX300 G2registered asH323Endpoints inCiscoTelePresenceVideoCommunicationServer Site - 2

Initiate amultisiteconference fromCisco WebexRoom Kit withDX70 andMX300 G2registered asH323 endpointsin two CiscoVCS Sites




PassedSX80Codec->UnifiedCM->DX80(CFA) ->SX10 QuickSet SX80Codec(Transfer)->UnifiedCM-> DX70

Verify whetherAudio Call canbe transferredfrom CiscoTelePresenceSX80 Codec toCall ForwardAll enabled inCisco WebexDX80registered inCisco UnifiedCommunicationsManager

Transfer theaudio call fromSX80 Codec toCFA enabled inDX80 registeredin Unified CM


PassedSX80Codec(PresentationSharing),MX300 G2,MX200 G2-> UnifiedCM ->SIPTrunk->MeetMe(MCU4510)

Verify whetherthe presentationcan be sharedfrom CiscoTelePresenceSX80 Codec ina Meet MeconferencewithCiscoTelePresenceMX300G2 andCiscoTelePresenceMX200 G2managed byMCU 4510 allregistered inCisco UnifiedCommunicationsManager

Sharepresentationfrom SX80Codec in a MeetMe conferencewith MX300 G2and MX200 G2managed byMCU 4510 inUnified CM




PassedDX70 ->Cisco Exp-CCluster 1 ->Zone ->Cisco Exp-CCluster 2 ->SX20 QuickSet

Verify theRound TripDelay valueduring videocall betweenCisco WebexDX70registered inCiscoExpressway-CCluster 1 andCiscoTelePresenceSX20 QuickSet registeredin CiscoExpressway-CCluster 2

Increased RoundTrip Delay valueduring video callbetween DX70and SX20 QuickSet inExpressway-Cclusters

UCJ12.5PH3S.VCS.G.001

PassedNAVerify whetheradvancedparameterCiscoTelePresenceManagementSuite loadBalancingMode isavailable forthe zonecreated forCisco MeetingServer in CiscoExpressway-C

Advancedparameterconfiguration forCMS loadbalancing inCiscoExpressway-C


PassedDX70 ->Unified CM-> Exp-C ->Exp-E ->Cloud User

Verify ForwardProxy Tunnelin Expresswayin a video callbetween CiscoWebex DX70registered inCisco UnifiedCommunicationsManager andCloud user viaMobile andRemote Access

Forward ProxyTunnel inExpressway in avideo callbetween DX70registered inUnified CM anduser registered inCloud via MRA




PassedNAVerify HTTPProxy forApple PushNotificationService inCiscoExpressway-Cand CiscoExpressway-E

HTTP Proxy forApple PushNotificationService inExpressway-CandExpressway-E


PassedNAVerifyconfiguringNTP Serversusing HostName andFQDN in CiscoExpressway-Cand CiscoExpressway-E

Configure NTPServers usingHost Name andFQDN inExpressway-C


PassedDX70 ->Exp-C ->Webex RoomKit Plus

VerifyDiagnosticLogging of theVideo Callbetween CiscoWebex RoomKit Plus andCisco WebexDX70registered inCiscoExpressway-C

DiagnosticLogging of theVideo Callbetween WebexRoom Kit Plusand DX70registered inExpressway-C


PassedNAVerifyEnabling andDisablingSingle NIC andDual NICDeployment inCiscoExpressway-E

Enabling andDisabling SingleNIC and DualNICDeploymentin Expressway-E




PassedNAVerifyAutomaticimport offeature optionsin CiscoTelePresenceVideoCommunicationServer andCiscoExpresswaySeries withoutmanualinstallation ofOption Keys

Automaticimport of featureoptions in CiscoVCS andExpresswaySeries withoutmanualinstallation ofOption Keys


PassedNAVerifyvalidatingTrusted CACertificate inCiscoExpressway-E

Validate TrustedCACertificate inExpressway-E


PassedWebex RoomKit Plus ->Exp-E ->Exp-C ->Unified CM-> Exp-C ->Exp-E ->78XXWebexRoom KitPlus -> Add-> MRGL ->Unified CM-> Sip Trunk->MCU5310-> SX20QuickSetWebexRoom KitPlus ->MergeWebexRoom KitPlus, 78XX,SX20 QuickSet -> (MRARecording –i-BiB)

To verify thatuser is able torecord theAdhocconferencevideo callbetween CiscoWebex RoomKit Plus, CiscoIP Phone 78XXand CiscoTelePresenceSX20 QuickSet allregistered inCisco UnifiedCommunicationsManager usingCiscoTelePresenceMCU 5310 viaMobile andRemote Access

RecordingAdhocconference videocall betweenWebex RoomKit Plus, 78XXand SX20 QuickSet registered inUnified CMusingMCU5310via MRA




PassedSX10 QuickSet -> Exp-E-> Exp-C ->Unified CM-> Exp-C ->Exp-E ->SX20 QuickSet -> CFA-> Exp-E ->Exp-C ->Unified CM-> Exp-C ->Exp-E ->DX70

Verify whetherVideo callbetween CiscoTelePresenceSX10 QuickSet and CiscoTelePresenceSX20 QuickSet can beforwarded toCisco WebexDX70 allregistered inCisco UnifiedCommunicationsManager viaMobile andRemote Access

Set Call ForwardAll in SX20Quick Set toDX70 bothregistered inUnified CM viaMRA


PassedWebex RoomKit Plus ->Exp-E->Exp-C(Secondary)-> UnifiedCM

Verify failoverregistration ofCisco WebexRoom Kit Pluswhen PrimaryCiscoTelePresenceVideoCommunicationServerExpressway-Cis down

Check FailoverRegistration ofWebex RoomKit Plus whenPrimaryExpressway-C isdown


PassedWebex RoomKit Plus(Local PhoneBook) ->Unified CM-> MX200G2

Verifyprovisioninglocalphonebook inCisco WebexRoom Kit Plusandestablishingvideo call byselecting thecontact ofCiscoTelePresenceMX200 G2registered withCisco UnifiedCommunicationsManager

Create Localphonebook inWebex RoomKit Plus andestablish call byselecting thecontact ofMX200 G2registered inUnified CM




PassedNAVerify whetherin Japaneseenvironmentuser is able toAdd Contactthrough CiscoWebex DX80Web UI workssuccessfully

In Japaneseenvironmentuser is able toAdd contactthrough DX80Web UI


PassedNAVerify whetherImport button isworking afterUser createdcontact throughCisco WebexDX80 Web UIworkssuccessfully

Import button isworking afteruser createdcontact throughDX80 Web UI


PassedNACheck whetheruser can able tocreate a folderfor contacts inWeb UserInterface ofCisco WebexRoom Kit afterupgrading thesystem to latestCollaborationEndpointversion

Check user canable to createfolder ofcontacts in WebUI of WebexRoom Kit


PassedNACheck whetherBackupconfigurationfile isdownloaded forCisco WebexRoom Kit Plusregistered inCisco UnifiedCommunicationsManager

DownloadBackupconfigurationsfrom WebexRoom Kit Plusregistered inUnified CM




PassedNACheck whether“More” Icon isadded in Globalscreen of CiscoTelePresenceSX20 QuickSet configuredvia In-RoomControl editorunder Japaneseenvironment

Configuration of“More” Icon inthe Globalscreen of SX20Quick Set viaIn-RoomControleditor underJapaneseenvironment


PassedNAVerify whetheruser is able tocreate multiplebuttons on thehome screenusing In-RoomControl editorthrough WebUI of CiscoWebex DX80workssuccessfully

User is able tocreate multiplebuttons on thehome screenthrough Web UIof DX80


PassedNACheck whetheruser can able toadd 4 In-RoomControl Panelsto CiscoTelePresenceTouch 10 ofCisco WebexRoomKit usingIn-RoomControl Editoras Endpoint inJapaneseEnvironment

Check adding 4In-RoomControloptions toWebex RoomKit in JapaneseEnvironment




PassedNACheck whetheradding "More"In-RoomControl PanelstoHomeScreenreflects Moreoption in CiscoTelePresenceTouch 10 ofCisco WebexRoomKit usingIn-RoomControl Editor

Check for"More" optionreflects in HomeScreen ofWebexRoom Kit whenmore In-RoomControl panelsare added forSystem


PassedNACheck whetheruser can able toselect type ofPanel whileadded In-Roomcontrol Panelsusing Editorafter upgradingto latestCollaborationEndpointSoftware 9.4.X

Check for Panelselection optionavailability forWebex RoomKit in In-RoomControls


PassedNAVerify whetherProvisioningFile can beretrieved fromURL/FTPServer in CiscoWebex RoomKit Plusregistered inCisco UnifiedCommunicationsManager

RetrieveProvisioning Filefrom URL/FTPServer in WebexRoom Kit Plusregistered inUnified CM




PassedNACheck whetheruser can able toenable NoiseSuppressionoption in WebUI of CiscoWebex RoomKit afterupgrading tolatestCollaborationEndpointversion 9.4.X

Check whetheruser can able toenable NoiseSuppressionoption forWebex RoomKit in JapaneseEnvironment


PassedWebex RoomKit ->Unified CM-> IX5000

Check whetherrustling sound(Keyboard/Clap)reduces whileon call betweenCisco WebexRoom Kit andCiscoTelePresenceIX5000 whileNoiseSuppressionoption isEnabled inCisco WebexRoom Kit allregistered inCisco UnifiedCommunicationsManager

Check whetherrustling soundreduces afterenabling NoiseSuppressionoption forWebex RoomKit in a call withIX5000 bothregistered inUnified CM


PassedNACheck whetheruser can takethe backup ofconfigurationvia Web UserInterface ofCiscoTelePresenceSX80 Codecafter upgradingto latestCollaborationEndpointSoftwareversion 9.4.X

Check whetheruser can take thebackup of hiddenconfiguration ofSX80 Codecafter upgradingto latest CEversion 9.4.X




PassedNACheck whetherJapanese Namegiven toContact inCisco SX80Codec via WebUser Interfacereflects inCiscoTelePresenceTouch 10 ofCiscoTelePresenceSX80 Codecafter upgradingthe system tolatestCollaborationEndpointversion 9.4.X

Check whetherJapanese Namegiven to contactin Web UI ofSX80 Codecreflects in Touch10 of CiscoTelePresenceSX80 Codec


PassedWebex RoomKit ->Unified CM-> DX70

Check whethercall connectsbetween CiscoWebex RoomKit and CiscoWebex DX70contact addedto LocalPhonebook ofCisco WebexRoom Kit viaWeb UserInterface bothregistered inCisco UnifiedCommunicationsManager

Check whethercall connectsbetween WebexRoom Kit andDX70 Contactadded as SIPcontact methodboth registeredin Unified CM


PassedNACheck whethersystemprovisioninginformation canbe retrieved byuser using URLfrom Web UserInterface ofCisco WebexRoom Kit afterupgrading tolatest CEversion

Check whetheruser can able toretrieveProvisioninginformation ofWebex RoomKit using URL




PassedWebex RoomKit Plus ->Unified CM-> DX70Webex RoomKit Plus ->Add - >Unified CM-> SX20Quick SetWebex RoomKit Plus(PresentationSharing) ->DX70, SX20Quick Set

Verify whetherShare TrayRebranding(Visuals)duringPresentationSharing fromCisco WebexRoom Kit Plusto CiscoWebexDX70 andCiscoTelePresenceSX20 QuickSet duringMultisiteConference,endpointsregistered inCisco UnifiedCommunicationsManager underJapaneseEnvironment

Share TrayRebranding(Visuals) duringPresentationSharing fromWebex RoomKit Plus toDX70 and SX20Quick Set duringMultisiteConferenceregistered inUnified CM


PassedSX20 QuickSet -> CiscoVCS ->Webex RoomKit PlusCiscoTMS ->CiscoVCS ->DX70 andSX20 QuickSet (OBTPConference)

Verify whetherSnooze optionis displayed inthe CiscoTelePresenceTouch 10 ofCiscoTelePresenceSX20 QuickSet for the OneButton to Pushconferencescheduled viaCiscoTelePresenceManagementSuite, endpointsin JapaneseEnvironment

Check forSnooze option inthe MeetingReminder popupfor the OBTPconference inSX20 Quick Setscheduled viaCisco TMS,endpoints inJapaneseEnvironment




PassedWebex RoomKit Plus(4000 Kbps)-> DX70 ->SX20 QuickSet ->Unified CM-> SIP Trunk->MCU5310(ScheduledConference)

Verify whethersetting call rateas 4000 Kbpsand scheduleconference viaCiscoTelePresenceMCU 5310 inCisco WebexRoom Kit Plus,Cisco WebexDX70 andCiscoTelePresenceSX20 QuickSet allregistered inCisco UnifiedCommunicationsManager

Set Call Rate as4000 Kbps andscheduleconference fromWebex RoomKit Plus viaMCU 5310,endpointsregistered inUnified CMunder JapaneseEnvironment


PassedWebex RoomKit Plus,Webex RoomKit ->Unified CM-> Sip Trunk-> MCU4510WebexRoom KitPlus ->(PeopleCount)

Verify PeopleCount in CiscoWebex RoomKit Plus duringMeet-MeConferencewith CiscoWebex RoomKit via CiscoTelePresenceMCU 4510registered inCisco UnifiedCommunicationsManager

People count inWebex RoomKit Plus duringMeet-MeConference withWebex RoomKit via MCU4510




PassedDX70 ->Unified CMCluster 1 ->TLS SIPTrunk ->Unified CMCluster 2 ->DX80

Verify whethersecure videocall can beestablishedbetween CiscoWebex DX70registered inCisco UnifiedCommunicationsManagerCluster 1 andCisco WebexDX80registered inCisco UnifiedCommunicationsManagerCluster 2 underJapaneseEnvironment

SecureInterclustervideo callbetween DX70and DX80 underJapaneseEnvironment


PassedWebex RoomKit Plus ->Unified CM-> DX70Webex RoomKit Plus ->Add ->Unified CM-> MRGL ->SIP Trunk ->MCU5310 ->MX300 G2Webex RoomKit Plus ->Merge ->DX70 -> CallTransfer ->Unified CM-> SIP Trunk-> CiscoVCS-> SX20Quick Set

Verify whethercall can betransferredfrom CiscoWebex DX70to CiscoTelePresenceSX20 QuickSet registeredin CiscoTelePresenceVideoCommunicationServer duringAdhocConferenceamong CiscoTelePresenceMX300G2 andCisco WebexRoom Kit Plusregistered inCisco UnifiedCommunicationsManager

Call Transferfrom DX70registered inUnified CM toSX20 Quick Setregistered inCisco VCSduring Adhocconferenceamong MX300G2 and WebexRoom Kit Plusvia MCU 5310registered inUnified CM




PassedSX20 QuickSet, DX70(Meet-Me) ->CiscoVCS ->Zone ->MCU4510DX70 ->(PresentationSharing)

VerifyPresentationSharing fromCisco WebexDX70 inMeet-MeConferencewith CiscoTelePresenceSX20 QuickSet using CiscoTelePresenceMCU 4510 allregistered inCiscoTelePresenceVideoCommunicationServer

PresentationSharing fromDX70 inMeet-MeConference withSX20 Quick SetusingMCU4510all registered inCisco VCS


PassedMX300 G2(PresentationSharing) ->CiscoVCS ->SX20 QuickSetMX300G2 (CallTransfer) ->CiscoVCS ->SX10 QuickSetSX10Quick Set ->CiscoVCS ->SX20 QuickSet

Check whethercall can betransferredfrom CiscoTelePresenceMX300 G2 toCiscoTelePresenceSX10 QuickSet duringWirelessSharingregistered asH323Endpoints inCiscoTelePresenceVideoCommunicationServer

Call transferduring WirelessSharing fromMX300 G2 toSX10 Quick Setregistered asH323 Endpointsin Cisco VCS




PassedSX10 QuickSet ->Unified CM-> MX300G2SX10Quick Set ->Add ->MRGL ->Unified CM->Sip Trunk->MCU4510-> DX70SX10 QuickSet ->MergeSX10Quick Set ->(PresentationSharing)(DifferentLayouts)

Verify whetheruser is able tochange thepresentationlayouts duringAdhocConference viaCiscoTelePresenceMCU 4510from CiscoTelePresenceTouch 10 ofCiscoTelePresenceSX10 QuickSet registeredin CiscoUnifiedCommunicationsManager

ChangePresentationlayouts fromTouch 10 ofSX10 Quick Setduring AdhocConferenceusingMCU4510registered inUnified CM


PassedMX300 G2(PresentationSharing)(Hold/Resume)-> UnifiedCM -> SX10Quick Set

Verify whetherHold/Resumeduringpresentationsharing fromCiscoTelePresenceMX300 G2 toCiscoTelePresenceSX10 QuickSet allregistered inCiscoTelePresenceVideoCommunicationServer

Hold andResume duringPresentationsharing fromMX300 G2 toSX10 Quick Setregistered inCisco VCS




PassedMX300 G2-> UnifiedCM Cluster 1-> SIP Trunk-> UnifiedCM Cluster 2-> MX200G2MX300G2 -> Add ->MRGL ->Unified CMCluster 1 ->Sip Trunk ->MCU5310 ->Unified CMCluster 2 ->DX70MX300G2 -> MergeMX300 G2(PresentationSharing) ->Unified CMCluster 1 ->SIP Trunk ->Unified CMCluster 2->DX70

VerifyInterclusterPresentationSharing inAdhocConferenceamong CiscoTelePresenceMX300 G2registered inCisco UnifiedCommunicationsManagerCluster 1 withCiscoTelePresenceMX200G2 andCisco WebexDX70registered inCisco UnifiedCommunicationsManagerCluster 2

PresentationSharing in anInterclusterAdhocConferenceamong MX300G2, MX200 G2and DX70 viaMCU 5310


PassedSX80Codec(SIP)->CiscoVCS->SX20QuickSet(SIP)SX80Codec(Transfer)->CiscoVCS->H323->DX80(H323)

Verify whetherthe call can betransferredfrom CiscoTelePresenceSX80 Codecregistered asSIP endpoint toCisco WebexDX80registered asH323 endpointin CiscoTelePresenceVideoCommunicationServer

Transfer the callfrom CiscoTelePresenceSX80 Codecregistered as SIPendpoint toDX80 registeredas H323endpoint inCisco VCS




PassedSX80Codec(Sharedline withSX10 QuickSet)->Unified CM->DX70

Verify whethera video call canbe made fromCiscoTelePresenceSX80 Codecwhich is inshared line withCiscoTelePresenceSX10 QuickSet to CiscoWebex DX70all endpointsregistered inCisco UnifiedCommunicationsManager

Make a videocall from SX80Codec which isin shared linewith SX10Quick Set toDX70 allendpointsregistered inUnified CM


PassedSX80Codec->WebexRoom KitPlusSX80Codec ->Add-> SX10QuickSetSX80Codec(WirelessSharing) ->Webex RoomKit Plus &SX10 QuickSet

Verify whethera wirelesspresentationsharing can beperformed fromCiscoTelePresenceSX80Codec(pairedwith Windowsvia proximity)with CiscoTelePresenceWebex RoomKit Plus andCiscoTelePresenceSX10 QuickSet in amultisiteconference allregistered inCisco UnifiedCommunicationsManager

Perform awirelesspresentationsharing fromSX80Codec(pairedwith Windowsvia proximity)with WebexRoom Kit Plusand SX10 QuickSet in a multisiteconference




PassedWebex RoomKit ->Unified CM->DX70WebexRoom Kit(Add) ->Unified CM->IX5000WebexRoom Kit(Add) ->Unified CM-> MX300G2

Check initiatinga multisiteconferencefrom CiscoWebex RoomKit connectedwith DualMonitor amongCisco WebexDX70, CiscoTelePresenceIX5000 andCiscoTelePresenceMX300 G2 allregistered inCisco UnifiedCommunicationsManager

Initiate amultisiteconference fromWebex RoomKit with DualMonitor amongDX70, IX5000and MX300 G2all registered inUnified CM


PassedNACheck whetheruser can able tomake presencestatus availableto see in CiscoExpressway-Core for JabberClientsregistered viaMobile andRemote Access

Check user ableto see presencestatus inExpressway – Cfor Jabber clientsregistered viaMRA

UCJ12.5SEFT.VCS.G.001

PassedNACheck whetheruser can able tomake presencestatus availableto see in CiscoExpressway-Edge for JabberClientsregistered viaMobile andRemote Access

Check user ableto see presencestatus inExpressway – Efor Jabber clientsregistered viaMRA




PassedNACheck whetheruser can set upan password inBackupwindow ofCiscoExpressway –Edge to takebackup of theCiscoExpressway–Edgesuccessfully

Check forPassword optionin Backupwindow ofExpressway- E


PassedNACheck whetheruser canperformBackupfunction ofCiscoExpressway –Edge byproviding theNew BackupPassword inMandatoryPassword fieldin CiscoExpressway -Edge

Change theBackupPassword andcheckperformingbackup ofExpressway- E


PassedNACheck whetherTURN Relaylicenses areavailable asdefault licensesin CiscoExpressway –Edge

Check whetherTURN Relaylicenses areavailable asdefault inExpressway - E




PassedNAVerify whetheruser is able toinstall CiscoTelepresencevideocommunicationserver /Expressway asvirtual machineand selectmedium sizeand manuallyconfigure allsuccessfully

Install CiscoVCS &Expressway asvirtual machineand selectmedium size


PassedNAVerify whetheruser is able toinstall CiscoTelepresencevideocommunicationserver /Expressway asvirtual machineand select largesize andmanuallyconfigure allsuccessfully

Install CiscoVCS &Expressway asvirtual machineand select Largesize


PassedNAVerify whetheruser is able toenable OauthAuthenticationin CiscoUnifiedCommunicationsManagersuccessfully

Enable OAuthAuthenticationin Unified CM




PassedSX10 QuickSet->Expressway-E->Expressway-C->UnifiedCM->WebexRoom Kit

Verify whetheruser is able toMake a callbetween SX10Quick Set andWebex roomkit bothregistered inCisco UnifiedCommunicationsManager viaMRA afterenabling SipOauth in CiscoUnifiedComminicationsManagersuccessfully

Make a callbetween SX10Quick Set andWebex room kitboth registeredin Unified CMvia MRA afterenabling SipOauth in UnifiedCM


PassedNACheck whetherCisco WebexRoom Kitrequests usersfor Adminaccess whileaccessing Puttysession forxAPIcommands,deviceregistered inCisco UnifiedCommunicationsManager

Check forAdminCredentials foraccessing xAPIcommands inWebex RoomKit




PassedNACheck loggingin to Puttysession ofCisco WebexRoom Kit afterchanging theAdmincredentials forsystem andcheck forAdmin accesscredentialsprompt request,deviceregistered inCisco UnifiedCommunicationsManager

Change theAdmincredentials andcheck forsuccessful loginfor xAPI ofWebex RoomKit


PassedNACheck whetherCiscoTelePresenceTouch 10requests toenter PersonalIdentityNumber (PIN)while pairing toCisco WebexRoom Kitwhich is inJapaneseEnvironment

Check for PINoption in Touch10 when pairingmanually toWebex RoomKit in JapaneseEnvironment


PassedNACheck whetheruser cansuccessfullypair CiscoTelePresenceTouch 10 toCisco WebexRoom Kitmanually afterchanging theAdmin accesscredentials ofCisco WebexRoom Kit

Change theAdmin PIN ofWebex RoomKit and checkfor successfulpairing of Touch10 to WebexRoom Kit




PassedMX200 G2-> UnifiedCM ->DX80MX200G2 ->UnifiedCM ->Add->SIP Trunk->MRGL->MCU5310 ->SX10 QuickSetMX200G2 -> Merge

Verify whetherH264 videocodec withHEVC CodecPipeline (HCP)support duringAdhocconferencefrom CiscoTelePresenceMX200 G2 toCisco WebexDX80 andCiscoTelePresenceSX10 QuickSet allregistered inCisco UnifiedCommunicationsManager viaCisco MCU5310

AdhocConference fromMX200 G2 toDX80 and SX10Quick Set withthe support ofH264 videocodec with HCP


PassedMX200 G2-> UnifiedCM ->DX80MX200G2 ->UnifiedCM ->Add->SIP Trunk->MRGL ->MCU5310 ->SX10 QuickSetMX200G2 ->MergeMX200G2->SharePresentation(Hold/Resume)

Check whetherHold andResume duringPresentationSharing inAdhocConferencefrom CiscoTelePresenceMX200 G2 toCisco WebexDX80 andCiscoTelePresenceSX10 QuickSet allregistered inCisco UnifiedCommunicationsManager viaCisco MCU5310 with thesupport ofH264 videocodec withHEVC CodecPipeline (HCP)

Hold andResume duringPresentationSharing inAdhocConference withthe support ofH264 videocodec with HCP




PassedMX200 G2-> DX80->SX10 QuickSet ->UnifiedCM->SIPTrunk->MRGL->MCU5310 ->Meet-MeConference

Verify whetherH264 videocodec withHEVC CodecPipeline (HCP)support duringMeet-meConferencebetween CiscoTelePresenceMX200 G2,Cisco WebexDX80 andCiscoTelePresenceSX10 QuickSet via CiscoTelePresnceMCU 5310 allare registered inCisco UnifiedCommunicationsManager

Meet-meConferencebetweenMX200G2,DX80,SX10Quick Set withthe support ofH264 videocodec with HCP


PassedDX80->UnifiedCM->SX10QuickSetDX80->UnifiedCM->SipTrunk->CMSbridge->MX200G2DX80->MergeDX80->PresentationSharing

Check whetherPresentationsharing fromCisco WebexDX80 afteradding CiscoTelePresenceMX200 G2while is invideo call withCiscoTelePresenceSX10 QuickSet via CiscoMeeting Serverall endpointsare registered inCisco UnifiedCommunicationsManager

CheckPresentationsharing fromDX80 afteradding MX200G2 as thirdparticipant withthe help of CMSbridges .




PassedNACheck whetherauthenticationvia xAPI accessby CiscoWebex DX80as anadministratorregistered inCisco UnifiedCommunicationsManager

User requiredadmin privilegefor accessingxAPI of DX80


PassedNACheck PINverificationafter restartingCiscoTelePresenceMX200 G2while manualpairing of CiscoTelePresenceTouch 10 withCiscoTelePresenceMX200 G2.

After restatingMX200 G2check PINverification forManual pairingof Touch 10




PassedMX200 G2(H323Endpoint) ->CiscoVCS ->SX80 Codec(SIPEndpoint)MX200G2 (H323Endpoint)(Add)(Hold/Resume)-> CiscoVCS-> DX80(SIPEndpoint)

Check whetherHold andResume inmultisiteconferencefrom CiscoTelePresenceMX200 G2registered asH323 Endpointin CiscoTelePresenceVideoCommunicationServer andCiscoTelePresenceSX80 Codec,Cisco WebexDX80registered asSIP Endpointsin CiscoTelePresenceVideoCommunicationServer

Hold andResume inMultisiteconference fromMX200 G2registered asH323 Endpointusing SX80Codec,DX80registered as SIPEndpoints inCisco VCS


PassedMX300 G2,SX10 QuickSet andWebex RoomKit ->Unified CM-> SIP Trunk-> MeetingServer

Check whetheruser can addCiscoTelePresenceSX10 QuickSet and CiscoWebex RoomKit to CiscoMeeting Serverconferencefrom CiscoTelePresenceMX300 G2 allendpointsregistered inCisco UnfiedCommunicationsManager inJapaneseEnvironment

Check addingSX10 Quick Setand WebexRoom Kit toCMS conferencefromMX300G2all endpoints inJapaneseEnvironment




PassedNACheck whetherCiscoTelePresenceMX300 G2requests usersfor Adminaccess whileaccessing Puttysession forxAPIcommands,deviceregistered inCisco UnifiedCommunicationsManager, afterrestarting thedevice viaCiscoTelePresenceTouch 10

Check forAdminCredential loginfor xAPI afterrestartingMX300 G2


PassedNACheck whetherCiscoTelePresenceTouch 10requests toenter PersonalIdentityNumber (PIN)while pairing toCiscoTelePresenceMX300 G2which is inJapaneseEnvironment

Check for PINoption in Touch10 when pairingmanually toMX300 G2 inJapaneseEnvironment




PassedDX80(PresentationSharing),MX300 G2,MX200 G2-> UnifiedCM -> SIPTrunk->Meet-Me(MCU5320)

Verify whetherpresentationsharing amongCisco WebexDX80, CiscoTelePresenceMX300G2 andCiscoTelePresenceMX200 G2managed byCisco MCU5320 allendpointsregistered inCisco UnifiedCommunicationsManager

Sharepresentationfrom DX80 in aMeet-Meconference withMX300 G2 andMX200 G2managed byMCU 5320 allendpointsregistered inUnified CM


PassedMX300G2->UnifiedCM->DX70MX300G2 ->Add->UnifiedCM ->SIPTrunk->MRGL->MCU5320->Webex RoomKitPlusMX300G2 (Merge)-> WebexRoom KitPlus WebexRoom KitPlus(PresentationSharing,Hold/Resume)

Verify whetherpresentationcan be sharedwhilehold/resume inAdhocConferenceamong CiscoTelePresenceMX300 G2,Cisco WebexDX70 andCiscoTelePresenceWebex RoomKit Plusmanaged byCisco MCU5320 allendpointsregistered inCisco UnifiedCommunicationsManager

Hold/ResumePresentationsharing in anAdhocconference fromMX300 G2registered inUnified CMmanaged byMCU 5320




PassedSX80Codec,MX300G2, WebexRoomKit(1152kbps) ->Cisco VCS->Zone->Meet-Me(MCU4510)

Verify whetherin Meet-Meconferencewithcall rate1152kbpsamong CiscoTelePresenceSX80 Codec,CiscoTelePresenceMX300G2 andCisco WebexRoom Kitmanaged byCisco MCU4510 allendpointsregistered inCiscoTelePresenceVideoCommunicationServer

Initiate aMeet-Meconference withCall rate 1152kbps amongSX80 Codec,MX300 G2 andWebex RoomKit managed byMCU 4510 allendpointsregistered inCisco VCS


PassedMX300 G2and SX10Quick Set ->Unified CM-> SIP Trunk-> MeetingServer

Check whetheruser can addCiscoTelePresenceMX300 G2 toCisco MeetingServerconferencefrom CiscoTelePresenceSX10 QuickSet registeredin Cisco UnfiedCommunicationsManager

Check addingMX300 G2 toCMS conferencefrom SX10Quick Set




PassedNACheck whetheruser cansuccessfullypair CiscoTelePresenceTouch 10 toCiscoTelePresenceSX10 QuickSet manuallyafter changingthe Adminaccesscredentials ofCiscoTelePresenceSX10 QuickSet

Change theAdmin PIN ofSX10 Quick Setand check forsuccessfulpairing of Touch10 to SX10Quick Set


PassedSX10 QuickSet ->Unified CM-> MX300G2MX300G2->Add->UnifiedCM ->SIPTrunk ->MRGL->MCU4510-> SX80CodecMX300G2 -> Merge

Verify Longduration callduring Adhocconferenceamong CiscoTelePresenceSX10 QuickSet, CiscoTelePresenceMX300G2 andCiscoTelePresenceSX80 Codecmanaged byCisco MCU4510 allendpointsregistered inCisco UnifiedCommunicationsManager

Long durationAdhocconferenceamong SX10Quick Set,MX300 G2 andSX80 CodecusingMCU4510all endpointsregistered inUnified CM




PassedSX10 QuickSet ->Unified CM-> MX300G2(AmplifiedVisuals)

Verify whethernew highvisibilityincoming callalert iswitnessed bothin On-ScreenDisplay andCIscoTelePresenceTouch 10 ofCiscoTelePresenceMX300 G2 onreceiving callfrom CiscoTelePresenceSX10 QuickSet bothregistered inCisco UnifiedCommunicationsManager

AmplifiedVisual incomingcalling alert inOSD and Touch10 ofMX300G2under JapaneseEnvironment


PassedSX10 QuickSet (512Kbps, 768Kbps, 3072Kbps) ->DX80 ->MX200 G2(Meet-MeConference)-> CiscoVCS-> Zone ->MCU 4510

Verify differentbandwidth callrates duringMeet-Meconferencebetween SX10Quick Set,Cisco WebexDX80, CiscoTelePresenceMX200 G2 viaCisco MCU4510 allregistered inCiscoTelePresenceVideoCommunicationServer

Set differentbandwidth callrates and initiateMeet-MeConferenceamong SX10Quick Set, DX80and MX200 G2via MCU 4510all registered inCisco VCS




PassedSX80Codec(Audioonly)->CiscoVCS->MX200G2MX200G2(AudiocallTransfer)->CiscoVCS->DX80SX80Codec(AudiocallTransfer)->CiscoVCS->SX20Quick Set

Verify whetheraudio call canbe transferredamong CiscoTelePresenceSX80 Codec,CiscoTelePresenceMX200 G2,Cisco WebexDX80, CiscoTelePresenceSX20 QuickSet allregistered inCisco VideoCommunicationServer

Perform audiocall transferamong SX80Codec, MX200G2,DX80, SX20Quick Set allregistered inCisco VCS


PassedSX80 Codec,SX20 QuickSet->CiscoVCS->Zones->MCU5320

Verify whetherPIN EntryMeet-Meconference canbe initiatedamong CiscoTelePresenceSX80 Codec,CiscoTelePresenceSX20 QuickSet after settingPIN from GUIof Cisco MCU5320 allregistered inCisco VCS asH323 endpoints

Initiate a PINentry Meet-Meconferenceamong SX80Codec, SX20Quick Set aftersetting PIN fromGUI of MCU5320 allregistered inCisco VCS asH323 endpoints


PassedSX80 Codec->UnifiedCM->MX200 G2

Verify whetherCiscoTelePresenceSX80 Codecsupports forH264 videocodec withHCP support

Check whetherSX80 Codecsupports forH264 videocodec with HCPsupport




PassedSX80Codec,DX80,DX70-> CiscoVCS->Meet-Me(MCU4510)

Verify whetherMeet-Meconference canbe initiatedamong CiscoTelePresenceSX80 Codec,Cisco WebexDX80 andCisco WebexDX70 viaCiscoMCU 4510 allendpointsregistered inCiscoTelePresenceVideoCommunicationServersuccessfully

Initiate aMeet-Meconferenceamong SX80Codec, DX80and DX70managed byMCU 4510 allendpointsregistered inCisco VCS


PassedSX80 Codec(EM User)(WirelessSharing) ->Unified CM-> Sip Trunk-> CiscoVCS-> SX20Quick Set

VerifyWirelessSharing fromEM user ofCiscoTelePresenceSX80 Codecpaired withWindows viaCiscoProximityregistered inCisco UnifiedCommunicationsManager toCiscoTelePresenceSX20 QuickSet registeredin CiscoTelePresenceVideoCommunicationServerSuccessfully

Wireless Sharingfrom EM user ofSX20 Quick Setregistered inUnified CM toSX80 Codecregistered inCisco VCS




PassedSX80Codec(pairedwithwindows) ->Cisco VCS->SX10QuickSetSX80Codec (pairedwithwindows)->SharePresentation

Verify whetherSharingpresentation for30-40 minutesin Longduration callfrom CiscoTelepresenceSX80 Codecpaired withWindowsDevice viaCiscoProximity toCiscoTelepresenceSX10 QuickSet bothregistered asH323 endpointsin Cisco VideoCommunicationServer

Presentationsharing in Longduration callfrom SX80Codec pairedwith WindowsDevice via CiscoProximity toSX10 Quick Setboth registeredas H.323endpoints inCisco VCS.


PassedDX70->Unified CM-> MX300G2

Verify whetherH264 videoCodec Supportin CiscoWebexDX70 while oncall with CiscoTelePresenceMX300 G2both registeredin CiscoUnifiedCommunicationsManagersuccessfully

Check H264Video Codecsupport in DX70while on callwith MX300 G2both registeredin Unified CM inJapaneseEnvironment




PassedWebex RoomKit , SX10Quick Set A ,SX10 QuickSet B andDX70(Meet-Me) ->Unified CM-> SIP Trunk->MCU5310

Verify whetherNoiseSuppressionoption workingin CiscoWebexRoom Kit inCisco MCUConferencewith two CiscoTelePresenceSX20 QuickSet and CiscoWebex DX70all registered inCisco UnifiedCommunicationsManagersuccessfully

Check whetherNoiseSuppressionoption workingin Webex RoomKit in Meet-MeConference withtwo SX20 QuickSet andDX70 allregistered inUnified CM


PassedDX70(DifferentCall rates),SX20 QuickSet, MX200G2(Meet-Me) ->Unified CM-> SIP Trunk->MCU5310

Verify whetherMeet-MeConference inCisco WebexDX70 withdifference callrates amongCiscoTelePresenceSX20 QuickSet and CiscoTelePresenceMX200 G2using CiscoMCU 5310 allregistered inCisco UnifiedCommunicationsManager inJapaneseEnvironmentsuccessfully

Meet-MeConference inDX70 withdifference callrates amongSX20 Quick Setand MX200 G2usingMCU5310all registered inUnified CM inJapaneseEnvironment




PassedDX70 andDX80 ->Unified CM-> SIP Trunk->MCU5310

Verify whetherDisplay name isdisplayed inCisco WebexDX70 and sameis displayed inCisco WebexDX80 bothregistered inCisco UnifiedCommunicationsManager inJapaneseEnvironmentsuccessfully

Set display nameas “タッチ” inDX70 and checkwhether thesame isdisplayed inDX80when bothare in call bothregistered inUnified CMwithJapaneseEnvironment


PassedDX70 , DX80and SX10Quick Set ->Unified CM-> SIP Trunk->MCU5310

Verify whetherTransfer fromCisco WebexDX70 to CiscoTelePresenceWebex DX80during wirelesssharing fromCisco WebexDX70 pairedwith MAC inMeet meConference allregistered inCisco UnifiedCommunicationsManager inJapaneseEnvironmentsuccessfully

Transfer fromDX70 to DX80during wirelesssharing fromDX70 pairedwith Mac in ameet meconferenceamong DX70 ,DX80 and SX10Quick Set




PassedIX5000,Webex DX80and WebexRoom Kit ->Unified CM-> SIP Trunk-> MeetingServer

Check whetheruser can addCiscoTelePresenceWebex DX80and CiscoWebex RoomKit to CiscoMeeting Serverconferencefrom CiscoTelePresenceIX5000 allendpoints inJapaneseEnvironment

Check addingWebex DX80and WebexRoom Kit toCMS conferencefrom IX5000 allendpoints inJapaneseEnvironment


PassedWebex RoomKit ->Unified CM-> DX70

Check forH264Video Codecsupport inCisco WebexRoomKitwhilein call withCisco WebexDX70 bothregistered inCisco UnifiedCommunicationsManager inJapaneseEnvironment

Check H264Video Codecsupport inWebex RoomKit while on callwith DX70 inJapaneseEnvironment


PassedWebex RoomKit ->Unified CM->DX70WebexRoom Kit(Add) ->Unified CM-> IX5000

Check forH264Video Codecsupport inCisco WebexRoomKitwhilein conferencewith CiscoWebex DX70and CiscoTelePresenceIX5000 allregistered inCisco UnifiedCommunicationsManager

Check H264Video Codecsupport inWebex RoomKit on aconference withDX70, IX5000all registered inUnified CM




PassedWebex RoomKit -> CiscoVCS ->DX70WebexRoom Kit(Add) ->CiscoVCS ->WebexDX80WebexRoom Kit(Add) ->CiscoVCS ->MX300 G2

Check whetheruser can Initiatea Multisiteconferencefrom CiscoWebex RoomKit, CiscoWebex DX70,Cisco WebexDX80 andCiscoTelePresenceMX300 G2 allregistered inCiscoTelePresenceVideoCommunicationServer

Initiate aMultisiteconference fromWebex RoomKit among withDX70, DX80and MX300 G2all registered inCisco VCS


PassedNAVerify whetherlogs archivecan bedownloaded inCisco WebexDX80 inJapaneseenvironmentafter upgradingto latestCollaborationEndpointsoftware

Checkdownloadinglogs archive inDX80 inJapaneseenvironmentafter upgradingto latest CEsoftware




PassedMX200 G2(H323Endpoint)(paired withiOS) -> CiscoVCS ->DX80(H323Endpoint)MX200G2 (H323Endpoint)(paired withiOS ) ->SharePresentationMX200G2 (H323Endpoint)(paired withiOS) ->Hold/Resume

Verify whetherin japaneseenvironmenthold/resumeduringPresentationSharing fromCiscoTelePresenceMX200 G2 ispaired with iOSvia CiscoProximity toCisco WebexDX80 bothregistered asH323Endpoints inCiscoTelePresenceVideoCommunicationServer

In Japaneseenvironmenthold/resumeduringpresentationsharing fromMX200 G2which is pairedwith iOS viaCisco Proximityto DX80 bothregistered asH323 Endpointsin Cisco VCS


PassedDX80->UnifiedCM->MX200G2DX80(3072Kb/s)->Add->UnifiedCM->SIPTrunk->MRGL->SX10QuickSetDX80->Add->UnifiedCM->SIPTrunk->MRGL->MX300G2DX80->MergeDX80->PresentationSharing

Verify whetherafter settingCall Rate as3072 kb/s thenPresentationSharing inAdhocConferencefrom CiscoWebex DX80to CiscoTelePresenceMX200 G2,CiscoTelePresenceSX10 QuickSet and CiscoTelePresenceMX300 G2 viaCiscoTelePresenceMCU 5320 allregistered inCisco UnifiedCommunicationManager

Set Call rate as3072 kb/s thenPresentationSharing inAdhocConference fromDX80 toMX200G2, SX10 QuickSet and MX300G2 using MCU5320 allregistered inUnified CM




PassedDX70->Unified CM-> MX200G2 (Forwardall calls to) ->Unified CM-> SIP Trunk-> UnifiedCM-> DX80

Verify whethervideo call fromCisco WebexDX70 to CiscoTelePresenceMX200 G2registered inCisco UnifiedCommunicationsManager getsforwarded toCisco WebexDX80registered inCisco UnifiedCommunicationsManager

Set Call Forwardall calls to inMX200 G2registered inUnified CM toDX80 registeredin Unified CM


PassedMX200 G2-> UnifiedCM ->DX80(Forwardall calls to) ->Unified CM-> SIP Trunk-> UnifiedCM-> DX70

Verify whetherin japaneseenvironmentvideo call fromCiscoTelePresenceMX200 G2 toCisco WebexDX80registered inCisco UnifiedCommunicationsManager getsforwarded toCisco WebexDX70registered inCiscoTelePresenceVideoCommunicationServer

In Japaneseenvironment setCall Forward Allcalls to in DX80registered inUnified CM toDX70 registeredin Cisco VCS




PassedDX80(pairedwithBluetoothHeadset)->UnifiedCM->SIPTrunk->CiscoVCS->MX200G2DX70->CiscoVCS->Zone->UnifiedCM->DX80(pairedwithBluetoothHeadset)DX80(pairedwithBluetoothHeadset)->Merge->UnifiedCM->MRGL->SIPTrunk->MCU5320

VerifyWhethervideo call canbe answered inAdhocconferencefrom CiscoWebex DX80paired withBluetoothHeadsetregistered inCisco UnifiedCommunicationsManageramong CiscoTelePresenceMX200G2 andCisco WebexDX70bothregistered inCiscoTelePresenceVideoCommunicationServer viaCiscoTelePresenceMCU 5320

Video call canbe answered inAdhocconference fromDX80 pairedwith BluetoothHeadset




PassedMX200 G2-> DX80->SX10 QuickSet ->UnifiedCM->SIPTrunk->MRGL->MCU5310 ->Meet-MeConferenceDX80(PresentationSharing)->CheckLayouts

Verify whetherin japaneseenvironmentdifferentlayouts duringPresentationSharing inMeet-meConferencebetween CiscoTelePresenceMX200 G2,Cisco WebexDX80 andCiscoTelePresenceSX10 QuickSet via CiscoTelePresnceMCU 5310 allare registered inCisco UnifiedCommunicationsManager

In japaneseenvironmentcheck differentpresentationLayouts inMeet-meConferencebetweenMX200G2,DX80,SX10Quick Set viaMCU 5310 allregistered inUnified CM


PassedDX80,DX70,MX200G2->CiscoVCS->Zone->MeetingServerDX80->Presentationsharing

Verify whetherPresentationcan be sharedfrom CiscoWebex DX80in Rendezvousconferenceinitiated viaCisco MeetingServer amongCisco WebexDX80,CiscoWebexDX70andCiscoTelePresenceMX200 G2 allregistered inCiscoTelePresenceVideoCommunicationServer

Presentationsharing fromDX80 inMeeting Server’sRendezvousconference




CSCvm93314FailedNAAfter initiatinga video callbetween DX80to MX200 G2both endpointsare registered inCisco UnifiedCM. PairProximity toMX200 G2.Make a secondcall to MX200G2 from DX70.Answer thecall throughIOS proximity.Whileanswering callthroughproximity, Callis gettingdropped

IOS Proximitycould not answersecond callpaired withMX200 G2


CSCvm83907FailedNACheck for NTPStatus Errormessage inIssues andDiagnosticspage in bothWeb UI andCiscoTelePresenceTouch 10 ofCisco WebexRoom Kit andCisco WebexDX70registered inCisco UnifiedCommunicationsManager

NTPStatus Errormessagereflecting twicein CE Endpointswhen NTP is notconfigured




CSCvm48079FailedNAThe Percentageof volumeIncrease/Decreaseis not visible onMX300 G2Touch 10RingtoneSetting Page byPressingVolumeUp/Downbutton ofMX300 G2Touch 10

The Percentageof volumeIncrease/Decreaseis not visible onMX300 G2Touch 10


CSCvm83431FailedNAIn Adhocconferencefrom SX10Quick Set whilesharingpresentationunable to seevideo withpresentation

Video withpresentation isnot visible inSX10 Quick Setwhile it initiateAdhocconference


CSCvh14061FailedMX200 G2-> UnifiedCM -> DX70DX70 -> CallTransfer ->Unified CM-> SX10Quick SetMX200 G2(Paired withWindows) ->Unified CM-> SX10Quick Set

Verify whetherCiscoTelePresenceMX200 G2,CiscoTelePresenceSX10 QuickSet and CiscoWebex DX70registered inPrimary CiscoUnifiedCommunicationsManagerfallback toSecondaryCisco UnifiedCommunicationsManager duringNetworkRe-throw

Check forCamera ControlIcon of the FarEnd Participantafter NetworkRe-throw




CSCvh63520FailedDX70 ->UnifiedCM->SX10Quick Set>Proximity(Pairedwith iOS)MX200 G2-> UnifiedCM ->SX10Quick Set->Proximity(Pairedwith IOS)

Verify whethersecond call canbe answerredfrom iOSpaired CiscoTelePresenceSX10 QuickSet via CiscoProximitywhile receivingcall from CiscoTelePresenceMX200 G2,endpointsregistered inCisco UnifiedCommunicationsManager

Second calldrops whileansweringthroughproximity


CSCvk45224FailedSX20 QuickSet -> CiscoVCS -> Zone->MCU4510

Verify CiscoTelePresenceMCUMeet-MeConference callcan betransferredfrom CiscoTelePresenceSX20 QuickSet to CiscoWebex DX70,endpointsregistered inCiscoTelePresenceVideoCommunicationServer

Call Transfermerged assecond incomingcall duringMeet-MeConference inCisco VCS




CSCvk47747FailedWebex RoomKit Plus ->Exp-C ->Exp-E ->Unified CM-> Exp-E ->Exp-C ->SX20 QuickSet WebexRoom KitPlus ->WirelessSharing

Verify whetherduringPresentationSharing fromCisco WebexRoom Kit Plusregistered inCisco UnifiedCommunicationsManager viaMobile andRemote Accessto CiscoTelePresenceSX20 QuickSet registeredin CiscoUnifiedCommunicationsManagerCluster 2 workssuccessfullywith JapanesePresentationDisplay Name

Setting JapanesePresentationName does notreflect whenendpointsregistered inUnified CM viaMRA


CSCvi88211FailedSX10 QuickSet and SX20Quick Set ->Unified CM-> SIP Trunk-> MeetingServer

Verify whetherFavorite optionis displayed inCiscoTelePresenceSX20 QuickSet inParticipants listafterCompletedTransferregistered inCisco UnifiedCommunicationsManagersuccessfully

Check Favoriteoption isdisplayed inSX20 Quick Setin Participantslist aftercompletedTransfer



CSCvm71707FailedSX10 QuickSet,MX300G2,DX80->Unified CM-> Sip Trunk->Meet-Me(MCU4510) SX10Quick Set(Sharepresentation)

VerifyPresentationsharing throughwire HDMIport is not ableto proceedduring MeetMe conferencefrom CiscoTelePresenceSX10 Quick toCisco TelePresenceMX300G2 andCisco WebexDX80 initiatedby CiscoTelePresenceMCU 4510 allregistered inCisco UnifiedCommunicationManager

Unable to Sharepresentationfrom SX10Quick Set duringmeet meconference of4510

Cisco Integrated Service Digital NetworkDefectsStatusCallComponentFlowDescriptionTitleLogical ID

PassedIP Phone A -> UnifiedCM 1 -> ISDN BRILine-> Unified CM 2-> IP Phone B

Verify a call fromCluster 1 to Cluster2 using ISDN BRILine

Establish a callfrom Cluster 1 toCluster 2 usingISDN BRI lineconfigured inISR4K

UCJ12.5S.EFT.ISDN.G.001

PassedIP Phone A -> UnifiedCM 1-> IP Phone B ->Unified CM1 -> ISDNBRI Line -> UnifiedCM 2 -> IP Phone C

Verify call transferto an IP Phone inother clusters usingISDN BRI Line

Call transfer to anIP Phone in othercluster via ISDNBRI Line


PassedIP Phone A -> UnifiedCM 1-> ISDN BRILine -> Unified CM 2-> IP Phone B

Verify whetherspeed dial call inCisco IP Phone viaISDN BRI Line

Speed Dial in anIP Phone viaISDN BRI Line


PassedIP Phone A -> UnifiedCM 1-> IP Phone B ->Unified CM1 -> ISDNBRI Line -> UnifiedCM 2 -> IP Phone C

Verify Singlenumber reachworking in a IPPhone via ISDNBRILine

SNR for IP Phonevia ISDN BRILine



Test Results SummaryCisco Integrated Service Digital Network

PassedIP Phone A -> UnifiedCM 1-> ISDN BRILine-> Unified CM 2-> IP Phone B; IPPhone C -> UnifiedCM 1-> ISDN BRILine -> Unified CM 2-> IP Phone D; IPPhone E -> UnifiedCM 1-> ISDN BRILine -> Unified CM 2-> IP Phone F;

Verify whether usercan establishmultiple voice callssimultaneouslybetween two clustersusing ISDN BRILine at a time

Establishmultiplecallssimultaneouslybetween twocluster usingISDN BRI Line


PassedIP Phone A -> UnifiedCM 1 -> ISDN BRILine-> Unified CM 2-> IP Phone B

Verify a callconversation fromCluster 1 to Cluster2 using ISDN PRILine

Establish a callfrom Cluster 1 toCluster 2 usingISDN PRI lineconfigured inISR4K


PassedIP Phone A -> UnifiedCM 1-> ISDN PRILine-> Unified CM 2-> IP Phone B->Unified CM 2-> IPPhone C

Verify Park andretrieved anincoming ISDN PRILine call in Cisco IPPhone

Park and retrievean incomingISDN PRI Linecall in an IPPhone


PassedIP Phone A -> UnifiedCM 1-> ISDN PRILine -> Unified CM 2-> IP Phone B

Verify whetherspeed dial call inCisco IP Phone viaISDN PRI Line

Speed Dial in anIP Phone viaISDN PRI Line


PassedIP Phone A -> UnifiedCM 1-> IP Phone B ->Unified CM1 -> ISDNPRI Line -> UnifiedCM 2 -> IP Phone C

Verify user is able totransfer a call to theSNR number usingmobility softkey viaISDN PRI Line

SNR mobility forIP Phone viaISDN PRI Line


PassedIP Phone A -> UnifiedCM 1 -> ISDN PRILine -> Unified CM 2-> IP Phone C

Verify user is ablelogin to theExtension Mobilityin an IP Phone andmake a call toanother IP Phone viaISDN PRI Line

Login toextensionmobility andmake a call to IPPhone via ISDNPRI Line


PassedIP Phone A -> UnifiedCM 1-> ISDN PRILine -> Unified CM 2-> Group Pickup(IPhone B/ IP Phone C/IP Phone D)

Verify whether canable make calls toGroup Pickupnumber of anothercluster via ISDNPRILine

Make a call toGroup Pickupnumber ofanother clustervia ISDN PRILine



Test Results SummaryCisco Integrated Service Digital Network

PassedIP Phone A -> UnifiedCM 1-> ISDN PRILine -> Unified CM 2-> IP Phone B(iDivert)-> Voicemail

Verify whether useris able establish acall to Cisco IPPhone in anothercluster via ISDNPRILine and iDivert thecall to voice mail

Establish a call toan IP Phone inanother clustervia ISDN PRILine and iDivertthe call to VM


PassedIP Phone A -> UnifiedCM 1-> ISDN PRILine -> Unified CM 2-> IP Phone B

Verify whether useris able receive anincoming ISDN PRILine call in Cisco IPPhone DND (Ringeroff) mode

Incoming ISDNPRI Line call to aDND(Ringer off)enabled IP Phone


Cisco IP PhonesDefectsStatusCall

ComponentFlow


PassedIP PhoneA->UnifiedCM1->SIPTrunk->UnifiedCM2->IPPhoneB->UnifiedCM2 ->IPPhone C

Verify whether linelabel information isdisplayed successfullyin Cisco IP Phone B88xx when receivinginter cluster call fromCisco IP Phone A78xx and validatedcall park by parkingthe call in Cisco IPPhone B 88xx andreceiving parked callin Cisco IP Phone C78xx

Display Linelabelinformation forInter clustercall in 88xxand validatecall park

UCJ12.5SPhI.IPPhone.G.002

PassedIP Phone A ->Unified CM ->IP Phone C

Verify whether CiscoIP Phone 88xx isupdating BLF statussuccessfully inenhanced line modefor shared line inCisco IP Phone 88xx

Validate BLFSpeed-Dialstatus forshared line in88xx in ELMmode

UCJ12.5SPHI.IPPhone.G.010


Test Results SummaryCisco IP Phones

PassedIP Phone A ->Unified CM ->VCS-E ->VCS-C ->Unified CM->IP Phone B

Verify whether CiscoIP Phone A 88xx withkey expansionmoduleis able to make a callto Cisco IP Phone Bregistered in Mobileand Remote Accessusing speed dial

Make a speeddial call toMRAregisteredphone usingKEM with78xx/88xx


PassedIP Phone A->Unified CM-> IP Phone B;IP Phone B ->Unified CM ->IP Phone C

Verify whether CiscoIP Phone B 78xx isable to transfer a callto Cisco IP Phone C88xx in same partitionsuccessfully andvalidating the busylamp speed status incall history of CiscoIP Phone C 88xx

Transfer a callfrom 78xx to88xx which arein samepartition andcheck the BLFstatus in callhistory of 88xx


PassedIP Phone A->Unified CM ->IP Phone B ->Unified CM ->IP Phone C

Verify whether CiscoIP Phone B 88xx isable to forward allcalls to Cisco IPPhone C 78xxsuccessfully whenCisco IP Phone B88xx is in busy stateand archive consolelogs for Cisco IPPhone C 78xx

Set forward allcalls throughself care portalwhen line isbusy in88xx/78xx andarchive consolelogs in88xx/78xx


PassedIP Phone A->UnifiedCM1->SIPTrunk->CUBE->SIPTrunk->UnifiedCM2->IPPhoneB; IP Phone B->Unified CM2-> IP Phone C->Unified CM2-> IP Phone D

Verify whether CiscoIP Phone 78xx withKey ExpansionModule is able tomake a call to CiscoIP Phone 88xxthrough cube speeddial successfully andvalidate chain transferin Cisco IP Phone B,C and D

Create a cubespeed dial inKEM with78xx and makea call throughspeed dial andvalidatingchain transfer




PassedIP PhoneA->UnifiedCM1->SIPTrunk->UnifiedCM2->IPPhoneB; IP Phone A->Unified CM1-> IP Phone C;IP Phone A ->Unified CM1 ->IP Phone D

Verify whether speeddial diretory numberis edited in keyexpansion module forCisco IP Phone78xx/88xx andsuccessfully validatedconference call in IPPhones(78xx/88xx)via SIP Trunk

Modify thespeed dialnumber inKEM with78xx/88xx andmakeconference call


PassedIP Phone A ->Unified CM1 ->SIP Trunk ->CUBE -> SIPTrunk ->Unified CM2 ->IP Phone B

Verify whether theCisco Wireless IPPhone 8821 is able tosearch an existingJapanese contact andable to make a call toIP Phone B via CiscoUnified BorderElement successfully

SearchJapanesecontact in 8821andmake a callfrom IP PhoneA to IP PhoneB via CUBE

UCJ12.5SPH3.IPPhone.G.003

PassedNAVerify whether theCisco Wireless IPPhone 8821 is able toimport all the localcontacts from thephone administrationpage successfully

Import a user’slocal contactsin CiscoWireless IPPhone 8821


PassedNAVerify whether theCisco Wireless IPPhone 8821 is able toexport all the localcontacts from thephone administrationpage successfully

Export a user’slocal contactsin CiscoWireless IPPhone 8821



Verify whether theCisco Wireless IPPhone 8821 is able tocreate a problemreport under settingsapp successfully

Create aproblem reportfrom CiscoWireless IPPhone 8821


PassedIP Phone A ->Unified CM ->IP Phone B ->Unified CM ->IP Phone C; IPPhone D ->Unified CM ->IP Phone A

Verify whether theCisco Wireless IPPhone 8821 is able toswap the heldconference call andactive callsuccessfully

Swap aconference callwith anotheractive call inCisco WirelessIP Phone 8821




PassedNAVerify whether theuser can able toimport the localcontacts into CiscoWireless IP Phone8821 via phoneadministration pagesuccessfully when IPPhone is in JapaneseEnvironment

Import acommaseparatedvalues (CSV)file of localcontacts intoCisco WirelessIP Phone 8821


PassedNAVerify whether theuser is able to viewthe local contactsfirstname andlastname displayformat in CiscoWireless IP Phone8821 when IP Phoneis in JapaneseEnvironment

Local contactsFirstname andLastnamedisplay inCisco WirelessIP Phone 8821


PassedIP Phone A->Unified CM ->IP Phone B

Verify whether CiscoIP Phone 7832 is ableto place an intercomcall successfully

Place intercomcall betweentwo phone inCisco IP Phone7832


PassedIP Phone A ->Unified CM ->IP Phone B ->Unified CM ->IP PhoneC->Unified CM->IP Phone D

Verify whether theCisco IP Phone 7832is able to join aexisting conferencecall using meet menumber

Initiate meetme conferencefrom Cisco IPPhone 7832


PassedIP Phone A ->Unified CM ->IP Phone C; IPPhone B ->Unified CM ->IP Phone C

Verify Cisco IP Phone88xx / 78xx is able toanswer the incomingcalls when line 1 isconfigured for autoanswer with speakerphone, when line 2 isconfigured for autoanswer with Ciscoheadset

78xx / 88xxbehavior whenauto answerwith speakerand headphonefor linesconfigured

UCJ12.5SPH3.SR.G.1004



PassedIP Phone B ->Unified CM 1-> SIP Trunk ->CUBE -> SIPTrunk ->Unified CM2 ->IP Phone A; IPPhone C ->Unified CM 1-> SIP Trunk ->CUBE -> SIPTrunk ->Unified CM2 ->IP Phone A

Verify Cisco IP Phone78xx / 88xx autoanswers the incomingcalls through CiscoBorder Element whenline 1 is configuredfor auto answer withspeaker phone andline 2 is configuredfor auto answer withheadset which isconnected with keyexpansion module

Auto answerCUBE callswith the Ciscoheadsetconnected withKEM



Verify phone buttontemplates for keyexpansion module issaved and applied forKEM supportedphones in CiscoUnifiedCommunicationsManager whenupdating throughInternet Explorer 11

Update the keyexpansionmoduletemplatesthrough IE 11



Verify Cisco IP Phone8865 is able to receivethe call for line 20connected using keyexpansion module byusing hand off as wellas pressing the linekey

Set prime linetrue for KEMline and answerthe call byhandoff


PassedNAVerify whether CiscoIP Phone 78xx/88xxgets register back toCisco UnifiedCommunicationsManager when theserver is shutdown forlong duration andrestarted back

Phoneregistrationstatus for78xx/88xx byrestarting callmanager after along timeshutdown




PassedATA Phone A-> Unified CM-> IP Phone B

Verify if the call issuccessful for CiscoIP Phone 78xx / 88xxto Analog Phoneregistered in CiscoUnifiedCommunicationsManager when autoanswer is enabled

Make call fromAnalog Phoneto IP Phoneregistered viaATA 191 inUnified CMwhen autoanswer isenabled


PassedATA Phone A-> Unified CM-> IP Phone B-> Unified CM-> IP Phone C-> Unified CM-> ATA PhoneD

Verify if a call fromanalog phone to CiscoIP Phone 78xx / 88xxcan be transfered to IPPhone A and B

Make call fromAnalog Phoneto IP Phoneregistered viaATA 191 inUnified CMand make achain transferto multiple IPPhone


PassedIP Phone A ->Unified CM ->ATA Phone A-> Unified CM-> ATA PhoneB

Verify for callforward all for analogphones in CiscoUnifiedCommunicationsManager to Cisco IPPhones

Call ForwardAll from ATA191 to other IPPhones


PassedATA Phone A-> Unified CM-> IP Phone A-> Unified CM-> IP Phone B

Verify whether analogphone connected callwith IP Phone A canbe resumed usingshared line

Resume theactive call inshared line inCisco IP Phoneby initiating acall fromanalog phone



Verify Cisco IP Phone78xx / 88xx registeredin Cisco UnifiedCommunicationsManager displayedthe speed dial optioninstead of favorites bypressing navigationkey down

Speed dialoptionvalidation in78xx / 88xx

UCJ12.5SEFT.IPPhone.G.001



PassedIP Phone A ->UnifiedCME ->IP Phone B ->UnifiedCME ->SIP Trunk ->Unified CM ->IP Phone C ; IPPhone D ->UnifiedCME ->IP Phone A

Verify paging callaudio is heard inCisco IP Phone 78xx/ 88xx duringconferenceconversation betweenCisco UnifiedCommunicationsManager Express andCisco UnifiedCommunicationsManager

Whisperpaging whenactiveconference callwith othercluster


PassedIP Phone A ->UnifiedCME ->IP Phone B ; IPPhone C ->UnifiedCME ->IP Phone B ; IPPhone D ->UnifiedCME ->IP Phone B ; IPPhone E ->UnifiedCME ->IP Phone B

Verify Cisco IP Phone78xx / 88xx isreceived the whisperfor paging call whenline 1, 2, and 3 are incall held state

Whisperpaging when 3lines of call inheld state


PassedIP Phone X ->UnifiedCME ->IP Phone B

Verify Cisco IP Phone78xx / 88xx is able todisconnect the pagingcall by pressing thespeaker button whenwhisper paging isdisabled

Disconnect thewhisper pagingcall by pressingthe speakerbutton


PassedIP Phone X ->UnifiedCME ->IP Phone B; IPPhone X ->UnifiedCME ->IP Phone C; IPPhone X ->UnifiedCME ->IP Phone A

Verify Cisco IP Phone78xx / 88xx is able toreceive the paging callby configuringdifferent codecs forthe phones

Whisperpaging whenphonesconfiguredwith differentcodecs


PassedIP Phone A ->Unified CM ->SIP Trunk ->UnifiedCME ->IP Phone B; IPPhone X ->UnifiedCME ->IP Phone B

Verify Cisco IP Phone88x5 is able tocontinue the video callwith other cluster userthrough SIP Trunkwhen paging callreaches the phone

Whisperpaging for88x5 phonesduring activevideo call




PassedIP Phone A ->Unified CM ->SIP Trunk ->UnifiedCME ->IP Phone B; IPPhone X ->UnifiedCME ->IP Phone B

Verify Cisco IP Phone78xx / 88xx is able tomute and unmute thepaging call whileactive call in progressand whisper paging isdisabled in CiscoUnified CME CLImode

Mute andunmute thepaging callwhen whisperpaging disabledin 78xx / 88xxduring activecall


CSCvk47824FailedIP Phone A ->Unified CM ->ATA Phone A-> Unified CM-> ATA PhoneB -> UnifiedCM -> IP PhoneB

Verify if a call fromanalog phoneregistered via ATA191 can do chaintransfer to multiple IPPhones and terminatefrom the IP Phoneregisterd with CiscoUnifiedCommunicationsManager

Make call fromIP Phone toAnalog Phoneregistered viaATA 191 inCUCM andmake a chaintransfer andfinally drop thecall


CSCvk47833FailedIP Phone A ->Unified CM 1-> SIP Trunk ->CUBE -> SIPTrunk ->Unified CM2 ->ATA Phone A->Unified CM2-> ATA PhoneB

Verify for the call tothe analog phone fromIP Phone registeredwith Cisco UnifiedCommunicationsManager which isbusy on another call

Make a call tothe analogphone from IPPhoneregistered withCUCM whichis busy onanother call


CSCvk23220FailedIP Phone B ->Unified CM->IP Phone A ->Unified CM->IP Phone C

Verify whether CiscoIP Phone 78xx isprompting to selectmobility user afterpressing mobilitysoftkey in phonedisplay screen

Answer theincoming callin remote userusing mobilityin Cisco IPPhone 78xx

UCJ12.5SPH3.IPPV.G.03

CSCvk19816FailedIP Phone A ->Unified CM ->IP Phone B

Verify whether thequality report logs areshowing in Japanesein Cisco Wireless IPPhone 8821

Validatequality reportlogs inJapanese inCisco WirelessIP Phone 8821




CSCvk16426FailedNAVerify whether CiscoIP Phone is able tosend toast message forJapanese in Cisco IPPhone 78xx

Validate callback toastmessage forJapanese inCisco 78xx IPPhone


Cisco Jabber ClientsDefectsStatusCall

ComponentFlow


PassedCJW1 ->Unified CM-> CJW2

Verify whether the CiscoJabber for Windows isable to initiate a call fromthe 3rd active linesuccessfully when multiline is configured forCisco Jabber forWindows

Initiate a call fromthe multi line inJabber forWindows

UCJ12.5SPHI.CJW.G.002

PassedCJW1 ->Unified CM-> CJW2 ->UnityConnection-> CJW2

Verify whether the CiscoJabber for Windows isable to forward calls tovoicemail successfullyfrom the multi line isconfigured in CiscoJabber for Windows

Call forward tovoicemail on multiline in Jabber forWindows


PassedCJA ->Unified CM-> CJW /IPPhone

Verify whether Cisco IPPhone 88xx and CiscoJabber for Windows isreceived the incomingcall alert successfully forCisco Jabber forWindows when Singlenumber reach isconfigured

Single numberreach call flow forJabber forWindows to CiscoIP Phone 88xx


PassedNAVerify whether the CiscoJabber for Windows isable to accept multipleWebEx meetingssuccessfully

Start multiplemeetings fromJabber forWindows



Test Results SummaryCisco Jabber Clients

PassedCJM1 ->Unified CM-> CJM2 ->Unified CM-> CJW

Verify whether the CiscoJabber for Mac2 is ableto forward calls fromline3 to Cisco Jabber forWindows successfullywhen multi line isconfigured for CiscoJabber for Mac2

Set call forward allfrom line3 inJabber for Mac toJabber forWindows

UCJ12.5SPHI.CJM.G.002

PassedIP Phone A-> UnifiedCM ->CJM; IPPhone B ->Unified CM-> CJM;IPPhone C ->Unified CM->CJM;CJA-> UnifiedCM -> CJM

Verify whether the CiscoJabber for Mac is able toreceive calls in Multiplelines (Line 1, Line 2,Line 3, and Line 4)successfully when multiline is configured inCisco Jabber for Mac

Line status inJabber for Macwhen incomingcalls received inmultiple lines

UCJ12.5SPHI.CJM.G.003

PassedCJI1->Unified CM-> CJI2;CJI1 ->Unified CM-> CJA

Verify whether the CiscoJabber for iPhone is ableto make a conference callwith Cisco Jabber forAndroid successfullywhen enhanced phonemode is configured inCisco Unified IM &Presence

Make a conferencecall from Jabberfor iPhone whenEnhanced phonemode is enabled

UCJ12.5SPHI.CJI.G.003

PassedCJI1 ->Unified CM->CJI2/CJM

Verify whether CiscoJabber for iPhone andCisco Jabber for Mac isreceived the incomingcall successfully whenSingle number reach isconfigured

Single numberreach in Jabber foriPhone to Jabberfor Mac


PassedCJA ->Unified CM-> CJM ->Unified CM-> CJI

Verify whether the call istransferred to CiscoJabber for iPhone whenCisco Jabber for Macwhich is configured forsingle number reachsuccessfully

Transfer a call toJabber for iPhonewhen Jabber forMac is configuredfor SNR




PassedNAVerify whether CiscoJabber for Android isable to search a roomsuccessfully in 'AllRooms' tab to join thechat room

Search a room tojoin in 'All Rooms'tab of Cisco Jabberfor Android

UCJ12.5SPH3.CJA.G.003

PassedNAVerify whether CiscoJabber for Android isable to join private chatroom successfully byproviding validcredentials and startconversation

Join private chatroom by providingvalid credentials inCisco Jabber forAndroid and startconversation


PassedCJA 1 ->Unified CM1 -> SIPTrunk ->Unified CM2 -> CJA 2

Verify whether CiscoJabber for Android isable mute a chat roomduring inter cluster call

Mute a single chatroom during intercluster call ofCisco Jabber forAndroid


PassedNAVerify whether CiscoJabber for Android isable to view messagedate and timesuccessfully in ‘MyRooms’ chat list

Validate message‘time and date’ in‘My rooms’ list ofCisco Jabber forAndroid


PassedNAVerify whether CiscoJabber for Android isable to send @someonemessage successfully inchat window

Send @someonemessage in the chatwindow of CiscoJabber for Android


PassedNAVerify whether CiscoJabber for Android isable to display ‘EdgeDomain’ details indiagnostics reportsuccessfully

Validate ‘EdgeDomain’ details indiagnostics reportof Cisco Jabber forAndroid


PassedNAVerify whether CiscoJabber for Android isable to display presenceserver status asdisconnectedsuccessfully when IMand Presence isdisconnected

Validate presenceserver status whenIM and Presence isdisconnected inCisco Jabber forAndroid




PassedNAVerify whether the CiscoJabber for Android1 isable to hide the contactphoto and validate thesettings option in CiscoJabber for Android2successfully

Hiding contactphoto in Jabber forAndroid1 andvalidate thesettings option inJabber forAndroid2 whenJabber forAndroid1 andJabber forAndroid2 loggedwith same user


PassedNAVerify whether CiscoJabber for iPhone andCisco Jabber for iPad isable to receive AESnotification successfullywhen Cisco Jabber foriPhone and Cisco Jabberfor iPad are logged inMulti Device Messaging

Validate AES pushnotification whenCisco Jabber foriPhone and CiscoJabber for iPad arelogged in MDM

UCJ12.5SPH3.CJI.G.002

PassedNAVerify whether CiscoJabber for iPhone is ableto load new messages inchat room successfullywhen user pulled downto view new messages

Pull down chatroom to view newmessages in CiscoJabber for iPhone


PassedNAVerify whether the CiscoJabber for Mac1 is ableto send callme request toCisco Jabber for Mac2successfully whensecurity label is enabledin Jabber config file

Send callmerequest fromCiscoJabber for Mac1 toCisco Jabber forMac2 whensecurity label isenabled in jabberconfig file

UCJ12.5SPH3.CJM.G.007

PassedNAVerify whether the CiscoJabber for Windows isable to enter wrong mailid and validating theCisco Jabber forWindows behaviorsuccessfully

Validate the Jabberbehavior whenuser entered wrongmail id in Jabberfor Windows

UCJ12.5SPH3.CJW.G.006



PassedCJA ->UnifiedCM1 -> SIPtrunk ->UnifiedCM2 ->CJM

Verify whether the CiscoJabber for Android isable to hide the contactphoto and validate theJabber for Androidcontact photo in CiscoJabber for Macsuccessfully

Hiding contactphoto in Jabber forAndroid andvalidate contactphoto in Jabber forMac when it is inactive call


PassedCJI ->Unified CM-> CJA

Verify whether the CiscoJabber for iPhone is ableto add 3 numbers withlabel in a single contactand make a call fromCisco Jabber for iPhonelabel3 to Cisco Jabber forAndroid successfully

Validate label foreach phonenumber in Jabberfor iPhone andmake a call fromJabber for iPhonelabel2 to Jabber forAndroid


PassedNAVerify whether CiscoJabber for Windows isable to display thepresence status in chatwindow successfullywhen users are not addedin contact list.

Validate presencestatus in chatwindow of CiscoJabber forWindows whenusers are not addedin contact list


PassedNAVerify whether CiscoJabber for Android isable to receive all fileformats(JPEG,GIF,Video,MP3)successfully from CiscoJabber for Windows

Send all fileformats in CiscoJabber forWindows to CiscoJabber for Android


PassedNAVerify whether CiscoJabber for Windows isable to make a sign outand sign in successfullyduring bad networkconnection

Validate sign inand sign out inCisco Jabber forWindows duringbad networkconnection


PassedNAVerify whether CiscoJabber for Windows isable to show the correctpresence status when thecontact is removed.

Validate thepresence when thecontact is removedfrom the contactsin cisco jabber forwindows


PassedNAVerify whether CiscoJabber for Windows isable to answer the call ingroup pickup whenpresence is set to DNDsuccessfully

Answer theincoming call ingroup pickupwhenstatus is DND inCisco Jabber forwindows




PassedNAVerify whether CiscoJabber for Windows isable to make a group chatsuccessfully when builtin bridge is enabled inCisco UnifiedCommunicationsManager

Validate CiscoJabber forWindows groupchat when built inbridge is enabledin Cisco UnifiedCommunicationsManager duringnetwork change


PassedCJW ->UnifiedCM1 -> SIPTrunk ->CUBE ->SIPTrunk->Unified CM2 -> CJM ;CJW ->UnifiedCM1 ->CJA

Verify whether CiscoJabber for Windows isable to send the messageto the participantsconnected in aconference call whennetwork coverage is lowand narrator is enabledwith high contrast mode

Send messagefrom JabberWindows in aconference callwhen the networkcoverage is low

UCJ12.5SEFT.CJW.G.008

PassedCJW A->Unified CM-> CJM ->Unified CM-> CJW B

Verify whether CiscoJabber for Windows isable initiate a conferencecall successfully in highcontrast mode when builtin bridge is enabled inCisco UnifiedCommunicationsManager

Initiate conferencecall from JabberforWindowswhenbuilt in bridge isenabled in highcontrast mode


PassedCJW ->Unified CM-> SIPTrunk ->CMS; CJM-> UnifiedCM -> SIPTrunk ->CMS; CJA-> UnifiedCM -> SIPTrunk->CMS

Verify whether Jabberfor Mac can change theself view window size ina conference call underpreservation mode

In Preservationmode adjust selfview window inJabber for Mac

UCJ12.5SEFT.CJM.G.020



PassedCJW ->UnifiedCM-> SIPTrunk->CMS; CJI-> UnifiedCM -> SIPTrunk ->CMS;CJM-> UnifiedCM -> SIPTrunk->CMS

Verify whether Jabberfor Mac is able totransfer the activepresenter to Cisco Jabberfor iPhone and validatethe presenter status inCisco Jabber for iPhonein preservation mode

In preservationmode transfer theactive presenterrole in Jabber forMac


PassedCJW ->UnifiedCM-> SIPTrunk->CMS; CJM-> UnifiedCM-> SIPTrunk->CMS; CJA-> UnifiedCM -> SIPTrunk->CMS

Verify whether Jabberfor Mac is able to sharethe screen to multipleusers and adjust thescreen view during lownetwork coverage

Adjust the screensshared inconference call inJabber for Macduring lownetwork coverage


PassedCJW ->Unified CM-> SIPTrunk ->CMS; CJI-> UnifiedCM -> SIPTrunk->CMS;CJA ->Unified CM-> SIPTrunk->CMS

Verify whether host isable to remove theparticipants in aconference call when thenetwork coverage is lowin Cisco Jabber foriPhone

Active status ofhost in Jabber foriPhone when hostis droppedintermittently

UCJ12.5SEFT.CJI.G.024

PassedCJW ->UnifiedCM1 -> SIPTrunk ->Unified CM2 -> CJA ;CJW ->UnifiedCM1 -> CJI

Verify whether an activecall can be transferredfrom Cisco Jabber forWindows to Cisco Jabberfor iPhone via SIP Trunkin high contrast modewith narrator enabled

Transfer a callfrom Jabber forWindows in highcontrast mode toJabber for iPhonevia SIP Trunk




CSCvm82363FailedCJI->UnifiedCM1 -> SIPTrunk ->UnifiedCM2 ->CJA

Verfiy whether CiscoJabber for iPhoneX isable to see the video ofCisco Jabber for Androidin call conversation

Initiate a video callfrom Jabber foriPhone x


CSCvk43089FailedNAVerify whether CiscoJabber for Windows isable to share screensuccessfully when devicedesktop oreintaion ischanged during screenshare

Share screen fromJabber forWindows bychanging desktoporientation


CSCvk43072FailedNAVerify whether CiscoJabber for Windows isable to share screensuccessfully when devicedesktop resolution ischanged during screenshare

Screen share fromJabber forWindows whenchanging desktopscreen resolutionduring screen share


Cisco Jabber GuestDefectsStatusCall Component FlowDescriptionTitleLogical ID

PassedNATo verify thatenterpriseadmin is ableto configure toallow dynamicguest username on CiscoJabber GuestServer

Configure toallowdynamicguest username onJabber guestServer

UCJ12.5SPH1S.JG.G.001


Test Results SummaryCisco Jabber Guest

PassedJabber guest client (windows)->JGServer-> Cisco Expressway-E->Cisco Expressway-C->UnifiedCM->Webex Room Kit

To Verify thatuser is able tomake an adhoccall betweenCisco Jabberguest client onwindows andCisco WebexRoom Kit viaCiscoExpressway-Eand check thedynamic guestuser name

Make anadhoc callbetweenJabber guestclient onwindows &WebexRoom KitviaExpressway-Eand checkthe dynamicguest username


PassedJabber guest client (Android)-> JGServer-> Cisco Expressway-E->Cisco Expressway-C->UnifiedCM-> Webex Room Kit->Add->Unified CM->MX200-G2->Merge

To Verify thatuser is able tomake an adhocconference callbetween CiscoJabber guestclient onandroid, CiscoTelePresenceMX200 G2and CiscoWebex RoomKit via CiscoExpressway-Eand check thedynamic guestuser name

Make anadhocconferencecall betweenJabber guestclient onandroid,MX200 G2& WebexRoom KitviaExpressway-Eand checkthe dynamicguest username


PassedJabber guest client (iPhone)-> JGServer-> Cisco Expressway-E->Cisco Expressway-C-> UnifiedCM-> Webex Room Kit plus->Content sharing

To Verify thatuser is able tosharing contentfrom Jabberguest client oniPhone duringvideo callbetween CiscoJabber guestclient oniPhone ,CiscoWebex RoomKit plus viaCiscoExpressway-Eand check thedynamic guestuser name

Contentsharing fromJabber guestclient oniPhoneduring videocall betweenJabber guestclient oniPhone,WebexRoom Kitplus viaExpressway-Eand checkthe dynamicguest username




PassedJabber guest client (Android)-> JGServer-> Cisco Expressway-E->Cisco Expressway-C-> UnifiedCM-> MX200-G2->Hold/Resume

To Verify thatuser is able tohold andresume thevideo callbetween CiscoJabber guestclient onandroid andCiscoTelePresenceMX200G2 viaCiscoExpressway-Eand check thedynamic guestuser name

Hold &Resume thevideo callbetweenJabber guestclient onandroid, andMX200 G2viaExpressway-Eand checkthe dynamicguest username


PassedJabber guest client(iPad)-> JGServer->Cisco Expressway-E->Cisco Expressway-C->UnifiedCM-> MX300-G2

To Verify thatuser is able tomake longduration adhocvideo callbetween CiscoJabber guestclient on iPadand CiscoTelePresenceMX300G2 viaCiscoExpressway-Eand check thedynamic guestuser name

Longdurationadhoc videocall betweenJabber guestclient oniPad andMX300 G2viaExpressway-Eand checkthe dynamicguest username




PassedJabber guest client (iPad)->JGServer->Cisco Expressway-E->Cisco Expressway-C->UnifiedCM->MX300-G2MX300-G2->Transfer->Unified CM-> MX200-G2

To Verify thatuser is able tomake videocall fromCiscoJabber guestclient on iPadto CiscoTelePresenceMX300 G2and transferthe call toCiscoTelePresenceMX200G2 viaCiscoExpressway-Eand check thedynamic guestuser name

Make anvideo callfrom Jabberguest clienton iPad toMX300 G2and transfercall toMX200 G2viaExpressway-Eand checkthe dynamicguest username


PassedJabber guest client (iPad)-> JGServer-> Cisco Expressway-E->Cisco Expressway-C-> UnifiedCM-> MX200-G2-> CFA->Unified CM-> Webex Room Kit

To Verify thatuser is able toset callforward all inCiscoTelePresenceMX200 G2 toCiscoTelePresenceWebex RoomKit and makevideo call fromCisco Jabberguest client oniPad to CiscoTelePresenceMX200G2 viaCiscoExpressway-Eand check thedynamic guestuser name

Call forwardall set inMX200 G2and checkthe dynamicguest username




PassedJabber guest client (iPad)-> JGServer->Cisco Expressway-E->Cisco Expressway-C->UnifiedCM-> MX200-G2-> Transfer->Unified CM-> Webex Room Kit->content sharing

To Verify thatuser is able tocheck dynamicguest username whiletransfer videocall along withcontent sharingfrom CiscoJabber guestclient onandroid viaCiscoExpressway-E

Checkdynamicguest username whiletransfervideo callalong withcontentsharing fromJabber guestclient onandroid viaExpressway-E


CFD CasesDefectsStatusCall Component


PassedIP Phone A ->Unified CME ->SIP Trunk ->Unified CM -> IPPhone B / IPPhone C

Verify whether usercan transfer aconference call fromCisco Wireless IPPhone 8821 byroaming to a new siteand connect back

Transfer aconference callfromWireless IPPhone 8821 byroaming to anew site andconnect back

UCJ12.5SEFT.CFD.G.035


Verify whether usercan transfer intercluster call fromCisco Wireless IPPhone 8821 byroaming to a new siteand connect back

Transfer intercluster call fromWireless IPPhone 8821 byroaming to anew site andconnect back



Verify whether usercan dial shared linecall from CiscoWireless IP Phone8821 and roam to anew site via CiscoUnifiedCommunicationsManagers Express

Dial shared linecall fromWireless IPPhone 8821 androam to a newsite via CME



Test Results SummaryCFD Cases

PassedIP Phone A ->Unified CME ->SIP Trunk ->Unified CM -> IPPhone B ->Unified CME ->SIP Trunk ->Unified CM -> IPPhone C

Verify whether usercan hold a sharedline call fromWireless IP Phone8821 and connect toan intercluster call

Hold a sharedline call fromWireless IPPhone 8821 andconnect to aintercluster call


PassedIP Phone A ->Unified CM ->Phone A; IPPhone A ->Unified CM ->Phone B ->Unified CM -> IPPhone B

Verify whether useris able to hold a callin analog phone andswap to a newinterclusterconference call viaCiscoUnified BorderElement

Hold a call inanalog phoneand swap to anew interclusterconference callvia CUBE


PassedCJM -> UnifiedCM -> CJW1;CJA -> UnifiedCM -> CJW1;CJW1 -> UnifiedCM -> CJW2

Verify whether theCisco Jabber forWindows is able toadd one or moreparticipantssuccessfully when itis in multipleWebExmeetings

Add one or moreparticipants fromCisco Jabber forWindows whenit is in multiplemeetings afternetwork change


PassedCJM -> UnifiedCM -> IP PhoneA; CJM ->Unified CM -> IPPhone B; CJM ->Unified CM -> IPPhone C ->Unified CM ->SIP trunk ->Unified CME ->IP Phone B

Verify whether theCisco Jabber forMacis able to joinconference call whenline1 and line2 are inhold state whenmultiline support isconfigured in CiscoJabber for Mac viaCisco UnifiedCommunicationsManager

Make multiplelines to hold andjoin a conferencecall from newline in CiscoJabber for Mac


PassedIP Phone A ->Unified CM 1 ->SIP Trunk ->Unified CM 2 ->IP Phone C ->Unified CM 2 ->IP Phone B

Verify whether CiscoIP Phone is able toanswer inter clustercall successfullyusing call pickupgroup

Delete andregister backCisco IP Phone88xx andconnect with theinter cluster callusing CallPickup




PassedIP Phone A ->Unified CM 1 ->SIP Trunk ->Unified CME ->IP Phone C ->Unified CME ->SIP Trunk ->Unified CM1 ->IP Phone B

Verify whether CiscoIP Phone A 88x isable make aconference callsuccessfully by usingredial button

Join aninterclusterconference callusing the redialbutton in CiscoIP Phone 88xx


PassedCJW -> UnifiedCM 1 -> SIPTrunk -> UnifiedCME -> IP PhoneC ->Unified CME-> SIP Trunk ->Unified CM1 ->IP Phone B

Verify whether thecall is ringing in bothCisco IP Phone 88xxand Cisco Jabber forAndroid when Singlenumber reach isconfiguredsuccessfully

Single numberreach video callflow for CiscoJabber forWindows toCisco IP Phone88xx via CM



Verify whether CiscoIP Phone A 88xx isable to make an intercluster call to CiscoUnifiedCommunicationsManager Expresssuccessfully throughspeed dial

Reboot CMEand initiate aninter clusterconference callfrom Cisco IPPhone 88xxusing speed dial


CSCvm80375FailedIP Phone A ->Unified CME ->SIP trunk ->Unified CM -> IPPhone B

Verify whetherMusic on hold streamstatus is shown theactive clients duringcall held statebetween SIP Phonesin Cisco UnifiedCommunicationsManager Express andCisco UnifiedCommunicationsManager

MoH status forcalls between IPPhonesregistered inUnified CM andUnified CME


CSCvm96062FailedIP Phone A ->Unified CM ->Phone A; IPPhone A ->Unified CM ->Phone B ->Unified CM -> IPPhone B

Verify whether useris able to swap to anew conference callfrom analog phone

Hold a call inAnalog phoneand swap to anew conferencecall via CUBE




ISDN PRIDefectsStatusCall Component


PassedIP Phone A ->Cluster1 -> ISDN PRILine-> Cluster2 -> IPPhone B

To verify a call fromCluster 1 to Cluster 2using ISDNPRI Line

Establish a callfrom Cluster 1 toCluster 2 usingISDN PRI lineconfigured inISR4K

UCJ12.5S.PHI.ISDN.G.024

PassedIP Phone A ->UnifiedCM1-> IP Phone B ->ISDN PRI Line->Unified CM 2 -> IPPhone C

To verify callforward enabled fromCluster 1 to Cluster 2using ISDNPRI Line

Establish callforward fromCluster 1 toCluster 2 usingISDN PRI lineconfigured inISR4K


PassedIP Phone A ->UnifiedCM 1-> ISDN PRILine -> Unified CM 2-> IP Phone B

To verify Hold andResume an incomingcall in an IP Phonewhen call establishedvia ISDN PRI Line

Hold and Resumean incoming callin an IP Phonewhen callestablished viaISDN PRI Line


PassedIP Phone A ->UnifiedCM1-> IP Phone B ->Unified CM 1 ->ISDN PRI Line ->Unified CM 2 -> IPPhone B

To Verify calltransfer to an IPPhone in otherclusters using ISDNPRI Line

Call Transfer toan IP Phone inother cluster viaISDN PRI Line


PassedIP Phone A ->UnifiedCM 1-> ISDN PRILine-> Unified CM 2-> IP Phone B->Unified CM 2-> IPPhone C

To verify Park andRetrieve an incomingISDN PRI Line callin an IP Phone

Park and Retrievean incomingISDN PRI Linecall in an IPPhone



To verify whetherspeed dial call in anIP Phone via ISDNPRI Line

Speed Dial in anIP Phone viaISDN PRI Line


PassedNATo verify whetheruser can able viewthe BLF status of anIP Phone via ISDNPRI Line

BLF status of anIP Phone viaISDN PRI Line



Test Results SummaryISDN PRI

PassedIP Phone A ->UnifiedCM 1-> ISDN PRILine -> Unified CM 2-> Hunt Pilot( IPhoneA/ IP Phone B/ IPPhone C)

To Verify whetheruser can able makecalls to anothercluster Hunt Pilotnumber via ISDNPRI Line

Make a call toanother clusterHunt Pilotnumber via ISDNPRI Line


PassedIP Phone A ->UnifiedCM 1-> ISDN PRILine -> Unified CM 2-> IP PhoneB(Voicemail)

To Verify whethercan able to send avoicemail to anothercluster IP Phone uservia ISDN PRI Line

Send a Voicemailto an IP Phoneuser via ISDNPRI Line


PassedIP Phone A ->UnifiedCM1-> IP Phone B ->Unified CM 1 ->ISDN PRI Line ->Unified CM 2 -> IPPhone C

To Verify Singlenumber reachworking to an IPPhone via ISDN PRILine

SNR for IP Phonevia ISDN PRILine


PassedIP Phone A ->UnifiedCM1-> IP Phone B ->Unified CM 1 ->ISDN PRI Line ->Unified CM 2 -> IPPhone C

To Verify user ableto transfer call to theSNR number usingMobility softkey viaISDN PRI Line

SNRMobility forIP Phone viaISDN PRI Line


PassedIP Phone A ->UnifiedCM 1 -> ISDN PRILine -> Unified CM 2-> IP Phone C

To Verify user ablelogin to theExtension Mobilityin an IP Phone andmake a call toanother IP Phone viaISDN PRI Line

Login toExtensionMobility andmake a call to IPPhone via ISDNPRI Line


PassedIP Phone A ->UnifiedCM 1-> ISDN PRILine -> Unified CM 2-> Group Pickup(IPhone B/ IP Phone C/IP Phone D)

TO Verify whethercan able make callsto Group Pickupnumber of anothercluster via ISDN PRILine

Make a call toGroup Pickupnumber of anothercluster via ISDNPRI Line


PassedIP Phone A ->UnifiedCM 1-> ISDN PRILine-> Unified CM 2-> Shared line DN(IPhone B/ IP Phone C)

Verify whether canable make calls toShared LineDirectory number ofanother cluster viaISDN PRI Line

Make a call toShared lineDirectoryNumberof another clustervia ISDN PRILine



Test Results SummaryISDN PRI

PassedIP Phone A ->UnifiedCM 1-> ISDN PRILine -> Unified CM 2-> IP Phone B(iDivert)-> Voicemail

To verify whetheruser can ableestablish a call to anIP Phone in anothercluster via ISDN PRILine and iDivert thecall to VM

Establish a call toan IP Phone inanother cluster viaISDN PRI Lineand iDivert thecall to VM



To verify whetheruser can able receivean incoming ISDNPRI Line call in an IPPhone DND (Ringeroff) mode

Incoming ISDNPRI Line call to aDND(Ringer off)enabled IP Phone


PassedIP Phone A ->UnifiedCM 1-> ISDN PRILine-> Unified CM 2-> IP Phone B; IPPhone C -> UnifiedCM 1-> ISDN PRILine -> Unified CM 2-> IP Phone D; IPPhone E -> UnifiedCM 1-> ISDN PRILine -> Unified CM 2-> IP Phone F;

To verify whetheruser can establishmultiple voice callssimultaneouslybetween two clustersusing ISDNPRI Lineat a time

EstablishmultipleVoice callssimultaneouslybetween twocluster usingISDN PRI Line


PassedIP Phone A ->UnifiedCM1-> IP Phone B ->Unified CM1-> ISDNPRI Line -> UnifiedCM 2 -> IP Phone C;IP Phone D ->UnifiedCM 1-> IP Phone E ->Unified CM1-> ISDNPRI Line-> UnifiedCM 2 -> IP Phone F

To verify whetheruser can establishmultiple conferencecalls simultaneouslybetween two clustersusing ISDNPRI Lineat a time

Establishmultipleconference callssimultaneouslybetween twocluster usingISDN PRI Line


Cisco Webex TeamsDefectsStatusCall

ComponentFlow


PassedNAVerify whether it is possibleto join meeting 5 minutesbefore the meeting starts byanswering the popupnotification in Cisco WebexTeams for Windows

Join meetings 5minutes beforethe meetingstarts in CiscoWebex Teamsfor windows

UCJ12.5SPHI.CWT.G.001


Test Results SummaryCisco Webex Teams

PassedNAVerify whether it is possibleto join meeting 1 minutesbefore the meeting starts byanswering the popupnotification in Cisco WebexTeams for Windows

Join meetings 1minutes beforethe meetingstarts in CiscoWebex Teamsfor windows


PassedNAVerify whether it is possibleto join meeting at the starttime by answering the popupnotification in Cisco WebexTeams for Windows

Join meetings atthe start timewhen meetingstarts in CiscoWebex Teamsfor windows


PassedNAVerify whether diagnosticsinformation for the paireddevice is displaying in CiscoWebex Teams for windows

Diagnosticsinformation forpaired device inCisco WebexTeams forwindows


PassedNAVerify whether diagnosticsinformation for the paireddevice is displaying in CiscoWebex Teams for Mac

Diagnosticsinformation forpaired device inCisco WebexTeams for Mac


PassedNAVerify whether is possibleto copy and paste themeeting information intopeople space in CiscoWebex Teams forMac client

Copy and Pastemeetinginformation intopeople space inCisco WebexTeams for Mac


PassedNAVerify whether is possibleto copy and paste themeeting information intopeople space in CiscoWebex Teams for Webclient

Copy and Pastemeetinginformation intopeople space inCisco WebexTeams for web


PassedNAVerify whether Space'sretention policy for a useroutside of organization inCisco Webex Teams forWindows

Space'sretention policyinformation foruser outside oforganization inCisco WebexTeams forWindows




PassedNAVerify whether Space'sretention policy for a useroutside of organization inCisco Webex Teams forMac

Space'sretention policyinformation foruser outside oforganization inCisco WebexTeams for Mac


PassedNAVerify whether on clickingthe meeting messageactivity, it is leading toconversation space in CiscoWebex Teams for Windows

Click theMessageactivity to go tothe conversationspace in CiscoWebex Teamsfor Windows


PassedNAVerify whether on clickingthe meeting messageactivity, it is leading toconversation space in CiscoWebex Teams for Windows

Go toconversationspace frommessageconversationfrom a meetingspace havingmany invitees inCisco WebexTeams forWindows


PassedNAVerify the new meetinglayout day view format inCisco Webex Teams forMac

View ofmeeting list infamiliar dayview format inCisco WebexTeams for Mac


PassedNAVerify whether meetingindication in orange colorwhenever mail scheduled incurrent time in CiscoWebexTeams for Mac

Orange lineindication formeetingscheduled incurrent time inCisco WebexTeams for Mac


PassedNAVerify whether sendingvarious attachment in agroup by mentioning thepeople name using@Mention successfullyperform the operation or notin Cisco Webex Teams forWeb

Send attachment@Mention byaddingformatting inCisco WebexTeams for Web




PassedNAVerify whether sendingvarious attachment in agroup by mentioning thepeople name using@Mention successfullyperform the operation or notusing Cisco Webex Teamsfor Web in Cisco WebexTeams for Android device

Send attachment@Mention byaddingformatting usingCisco WebexTeams for Webin Cisco WebexTeams forAndroid device


PassedNAVerify whether sendingvarious attachment in agroup by mentioning thepeople name using@Mention successfullyperform the operation or notusing Cisco Webex Teamsfor Web in Cisco WebexTeams for iOS device

Send attachment@Mention byaddingformatting usingCisco WebexTeams for Webin Cisco WebexTeams for iOSdevice


PassedNAVerify whether user getnotified for using anunsupported browser forCisco Webex Teams inCiscoWebex Teams for iOS

User notified forusing anunsupportedbrowser forCisco WebexTeams in CiscoWebex Teamsfor iOS


PassedNAVerify whether it is possibleto Join any meeting byentering the video addressfrom the calendar invite inthe Join a Meeting box ofthe Cisco Webex Teams forWindows

Join anymeeting byentering thevideo addressfrom thecalendar invitein the Join aMeeting box ofthe CiscoWebex Teamsfor Windows


PassedNAVerify whether it is possibleto Join any meeting byentering the video addressfrom the calendar invite inthe Join a Meeting box ofthe Cisco Webex Teams forWeb

Join anymeeting byentering thevideo addressfrom thecalendar invitein the Join aMeeting box ofthe CiscoWebex Teamsfor Web




PassedNAVerify whether after initialsetup of Cisco Spar for Webin Cisco Webex Teams forAndroid device, it mustredirect the user to app storeor play store successfully

Redirect user toapp store oncethe initial setupof Cisco WebexTeams for webcompleted inCisco WebexTeams forAndroid


PassedNAVerify whether CiscoWebexTeams for iOS is able tomark 50 plus lines of text asread from recents during1-To-1 chat with CiscoWebex Teams for Windows

Mark 50 andmore lines oftext as readduring 1-To-1chat


PassedNAVerify whether CiscoWebexTeams for iOS is able tomark unread emojis as readfrom recents of 1-To-1 chatwith Cisco Webex Teamsfor Windows successfully

Marking emojisas read in CiscoWebex Teamsfor iOS during1-To-1 chat


PassedNAVerify whether CiscoWebexTeams for iOS is able tomark a message a text andemoji together as read fromrecents successfully during1-To-1 chat with CiscoWebex Teams for DesktopClients(Windows & Mac)

Unread textalong withemoji marked asread in recentsof Cisco WebexTeams for iOS


PassedNAVerify whether CiscoWebexTeams for iOS is able todisplay unfinished draftscount in recents successfully

Display draftcount in recentstab of CiscoWebex Teamsfor iOS


PassedNAVerify whether CiscoWebexTeams for iPhone is able todisplay draft of 1-To-1 chatmessage with Cisco WebexTeams for DesktopClients(Windows & Mac)successfully

Complete thedraft and checkthe draft countis decreased inCisco WebexTeams foriPhone




PassedNAVerify whether CiscoWebexTeams for iOS is able todisplay draft of photoattached during 1-To-1 chatmessage with Cisco WebexTeams for DesktopClients(Windows & Mac)successfully

Display draft ofphoto takenduring 1-To-1chat with CiscoWebex Teamsfor DesktopClients


PassedNAVerify whether CiscoWebexTeams for iOS is able todisplay draft of emojimessage during 1-To-1 chatwith Cisco Webex Teamsfor DesktopClients(Windows & Mac)successfully

Unfinishedemoji draftdisplayed inCisco WebexTeams for iOSduring 1-To-1chat


PassedNAVerify whether CiscoWebexTeams for iOS is able todisplay draft of file attachedduring 1-To-1 chat withCisco Webex Teams forDesktop Clients(Windows& Mac) successfully

Draft of fileattached during1-To-1 chatwith CiscoWebex Teamsfor DesktopClients


PassedNAVerify whether CiscoWebexTeams for iOS is able todisplay the timestamp ofSpace chat participantssuccessfully once themessage is seen

Timestamp listdisplay duringSpace chat inCisco WebexTeams for iOS


PassedNAVerify whether CiscoWebexTeams for DesktopClients(Windows &Mac) isable to initiate a samplemeeting when the new userlogged in the app

Samplemeetinginitiated whennew user loggedin the app inCisco WebexTeams forDesktop Clients


PassedNAVerify whether CiscoWebexTeams for Windows is ableto initiate a Team meetingwith Cisco Webex Teamsfor Mobile Clients frommeeting option successfully

Initiate ameeting frommeeting tab inCisco WebexTeams forWindows


PassedNAVerify whether the Space iscreated when the meeting isscheduled through Outlookusing @CWT in locationsuccessfully

Space is createdwhenmeeting isscheduled inOutlook




PassedNAVerify whether the meetingnotification disappears andalso the notification isdisplayed when CiscoWebex Teams for windowscancels the CWT meetingthrough Outlooksuccessfully

Cancel meetingfrom reminderand check thebehavior inCWT Space


PassedCiscoWebexTeams forWindows-> CWTCloud ->CiscoWebexTeams forAndroid ->CWTCloud ->CiscoWebexTeams foriOS

Verify whether CiscoWebexTeams for DesktopClients(Windows &Mac) isable to join themeeting fromcurrent day meeting listsuccessfully

Joining meetingfrom currentday meeting listin Cisco WebexTeams forDesktop Clients


PassedNAVerify whether CiscoWebexTeams for Mac is able toinitiate desktop share duringa Team meeting with CiscoWebex Teams for MobileClients frommeeting optionsuccessfully

Desktop shareduring Teammeeting frommeeting tab inCisco WebexTeams for Mac


PassedNAVerify whether CiscoWebexTeams for Mac is able toinitiate a Teammeeting withCisco Webex Teams forDesktop Clients(Windows& mac) from frequentmeeting list successfully

JoiningMeetingfrom frequentmeeting listwithin CiscoWebex Teamsfor DesktopClients




PassedCiscoWebexTeams forWindows1-> CWTCloud ->CiscoWebexTeams forWindows2-> CWTCloud ->CiscoWebexTeams forAndroid

Verify whether CiscoWebexTeams for Windows is ableto upload logs and alsocheck the pop up displayedsuccessfully during teammeeting

Sending logsduring teammeeting withCisco WebexTeams forMobile Clients

UCJ12.0FCS.CWT.G.006

PassedNAVerify whether CiscoWebexTeams Android is able toadd the new image to aspace by taking a photosuccessfully

Adding newimage to a spacein Cisco WebexTeams forAndroid


PassedNAVerify whether CiscoWebexTeams Android is able toadd the new image to a teamby taking a photosuccessfully

Adding newimage to a teamin Cisco WebexTeams forAndroid


PassedNAVerify whether CiscoWebexTeams Android is able toedit the existing image in aspace by taking a photosuccessfully

Editing spaceimage in CiscoWebex Teamsfor Android


PassedNAVerify whether CiscoWebexTeams Android is able toedit the image of a team bytaking a photo successfully

Editing teamimage in CiscoWebex Teamsfor Android


PassedIP Phone A-> UnifiedCM ->VCS-C ->VCS-E ->CWTCloud ->CiscoWebexTeams forMac

Verify whether CiscoWebexTeams for Mac is able toattend the incoming callfrom Cisco IP Phone Ausing speed dial successfullywhen (Cisco IP Phone B &C is in shared line)

Speed Dial withShared line inIP Phone

UCJ12.0SPHII.CWT.G.069



PassedIP Phone A-> UnifiedCM -> IPPhone B; IPPhone A ->UnifiedCM->VCS-C-> VCS-E-> CWTCloud ->CiscoWebexTeams forWindows2

Verify whether CiscoWebexTeams forWindows2 is ableto attend the incoming callfrom Cisco IP Phone Ausing redial successfully

Redial a call inCisco IP Phone


PassedIP Phone A-> UnifiedCM -> IPPhone B; IPPhone A ->UnifiedCM->VCS-C-> VCS-E-> CWTCloud ->CiscoWebexTeams forWindows2

Verify whether Cisco IPPhone B is able to attend theincoming call from Cisco IPPhone A using redial andalso check the call is able tohold and resumed backsuccessfully

Hold andResume theredialed call inCisco IP Phone



Verify whether Cisco IPPhone A is able to hold andresume the call of CiscoWebex Teams for Macsuccessfully using speed dialwhen (Cisco IP Phone B &C is in shared line)

Hold andResume the callin IP Phonewhen it is inshared line




PassedIP Phone A-> UnifiedCM -> IPPhone B; IPPhone A(redial) ->UnifiedCM->VCS-C-> VCS-E-> CWTCloud ->CiscoWebexTeams forWindows2: IP PhoneB ->UnifiedCM-> IP PhoneC

Verify whether CiscoWebexTeams forWindows2 is ableto attend the incoming callfrom Cisco IP Phone Ausing redial and also CiscoIP Phone B is able totransfer the redialed call toCisco IP Phone Csuccessfully

Transfer theredialed call inCisco IP Phone



Verify whether CiscoWebexTeams for Mac is able toattend the hunt group callsuccessfully when (Cisco IPPhone B , C & D is in huntgroup)

Cisco WebexTeams for Macattends huntgroup call



Verify whether the huntgroup call is able to hold andresume back successfullywhen (Cisco IP Phone B , C& D is in hunt group)

Hold andresume the huntgroup call inCisco WebexTeams for Mac




PassedCiscoWebexTeams forWeb ->CWTCloud ->CiscoWebexTeams forWindows

Verify whether CiscoWebexTeams for Web is able tomake 1-To-1 call fromChrome browser to CiscoWebex Teams for Windowssuccessfully

Make a callfrom Chromebrowser toCisco WebexTeams forWindows

UCJ12.5.PHIIS.CWT.G.001

PassedCiscoWebexTeams forWeb ->CWTCloud ->CiscoWebexTeams Mac

Verify whether the video isdisplayed properly withoutbandwidth delay during1-To-1 call from CiscoWebex Teams for Web withCisco Webex Teams forMac successfully

Video clarityduring 1-To-1call from CiscoWebex Teamsfor Web withCisco WebexTeams for Mac


PassedCiscoWebexTeams forWeb1 ->CWTCloud ->CiscoWebexTeams forWeb2 ->CWTCloud ->CiscoWebexTeams forWeb3

Verify whether CiscoWebexTeams for Web is able tomake a space call withinCisco Webex Teams forWeb clients from Chromebrowser successfully

Making a Spacecall fromchrome browser





Verify whether the teammeeting can be escalatedChrome browser of threeCisco Webex Teams forWeb clients successfully

Escalating ateam meetingwithin CiscoWebex Teamsfor Web Clientsfrom ChromeBrowser



Verify whether CiscoWebexTeams for Web1 is able toshare the whiteboard fromteam meeting during screenshare within Cisco WebexTeams for Web clientssuccessfully

Whiteboardshare duringteam meetingwithin CiscoWebex Teamsfor Web clients


PassedCiscoWebexTeams forWeb ->CWTCloud ->CiscoWebexTeams forDesktopClient

Verify whether CiscoWebexTeams for Web is able toview the recents from callwindow parallel during1-To-1 call with CiscoWebex Teams for DesktopClients(Windows & Mac)from Chrome browser

Viewing recentsfrom callwindow inCisco WebexTeams for webcalling





Verify whether CiscoWebexTeams for Web is able tomaximize the call windowfrom recents viewsuccessfully during 1-To-1call with Cisco WebexTeams for DesktopClients(Windows & Mac)

Call windowsscreen displaywhen user opensany chatwindow parallelin Cisco WebexTeams for Web



Verify whether CiscoWebexTeams for Web1 is able tomute the participantsuccessfully during 1-To-1call with Cisco WebexTeams for Web2

Mute theparticipantduring webcalling fromChromeBrowser


PassedCiscoWebexTeams forWeb1 ->CWTCloud ->CiscoWebexTeams forWeb2;CiscoWebexTeams forWeb3 ->CWTCloud ->CiscoWebexTeams forWeb1

Verify whether CiscoWebexTeams for Web1 is able toattend the second call invitenotification from CiscoWebex Teams for Web3during on-going 1-To-1 call

Accept thesecond callinvitenotificationduring Webcalling





Verify whether CiscoWebexTeams for MobileClients(Android & iOS) isable to start share its screensuccessfully during spacecall with other CiscoWebexTeams Clients

Share screenduring spacecall in CiscoWebex Teamsfor MobileClients



Verify whether CiscoWebexTeams for MobileClients(Android & iOS) isable to do chat during spacecall screen sharingsuccessfully

Chat duringscreen share inCisco WebexTeams forMobile Clients


PassedCiscoWebexTeams forWindows-> CWTCloud ->CiscoWebexTeams forMobileClient

Verify whether CiscoWebexTeams for MobileClients(Android/iOS) is ableto share the whiteboardduring 1-To-1 call screensharing successfully withCisco Webex Teams forWindows

Sharingwhiteboardduring 1-To-1call in CiscoWebex Teamsfor MobileClients




PassedCiscoWebexTeams forWindows1-> CWTCloud ->CiscoWebexTeams forMobileClient

Verify whether CiscoWebexTeams for MobileClients(Android/iOS)displays the second callnotification during 1-To-1call screen share with CiscoWebex Teams for Windows

Second callnotificationduring 1-To-1call screen sharein Cisco WebexTeams forMobile Clients


PassedCiscoWebexTeams forWindows1-> CWTCloud ->CiscoWebexTeams forMobileClient;CiscoWebexTeams forWindows2-> CWTCloud ->CiscoWebexTeams forMobileClient

Verify whether CiscoWebexTeams for MobileClients(Android & iOS) isable to decline the secondcall notification during1-To-1 call screen share withCisco Webex Teams forWindows

Reject thesecond callnotificationduring 1-To-1call screen sharein Cisco WebexTeams forMobile Clients


PassedNAVerify whether CiscoWebexTeams for MobileClients(Android & iOS) isable to share a file fromCisco Webex Teams forWindows during 1-To-1 chatto any other 1-To-1 chatfrom recents successfully

Copy and shareany type of filefrom 1-To-1chat to other1-To-1 chat inCisco WebexTeams forMobile Clients


PassedNAVerify whether CiscoWebexTeams for MobileClients(Android & iOS) isable to share a file fromCisco Webex Teams forWindows during 1-To-1 chatto any other space chatsuccessfully

Copy and shareany type of filefrom 1-To-1chat to spacechat in CiscoWebex Teamsfor MobileClients




PassedNAVerify whether CiscoWebexTeams for MobileClients(Android & iOS) isable to share a file fromCisco Webex Teams forWindows to any existingteam chat from recentssuccessfully

Sharing fromteam chat to1-To-1 chat inCisco WebexTeams forMobile Clients


PassedNAVerify whether CiscoWebexTeams for MobileClients(Android & iOS) isable to share the downloadedfile from 1-To-1 chat ofCisco Webex Teams forWindows to any other spacechat successfully

Share adownloaded filefrom 1-To-1chat to anyspace chat inCisco WebexTeams forMobile Clients


PassedNAVerify whether CiscoWebexTeams for MobileClients(Android & iOS) isable to display theJPEG/PNG files sharedduring 1-To-1 chat withCisco Webex Teams forWindows

Navigate toimage file in1-To-1 chat ofCisco WebexTeams forMobile Clients


PassedNAVerify whether CiscoWebexTeams for MobileClients(Android & iOS) isable to navigate to theconversation where the filetype(.docx ,.txt,.pptx,.xlsx)is shared during 1-To-1 chatwith Cisco Webex Teamsfor Windows

Navigate to anytype of file in1-To-1 chat ofCisco WebexTeams forMobile Clients


PassedNAVerify whether CiscoWebexTeams for MobileClients(Android & iOS) isable to locate the screencapture shared during 1-To-1chat with Cisco WebexTeams for Windows

Locate to screencapture in1-To-1 chatwindow ofCisco WebexTeams forMobile Clients


PassedNAVerify whether CiscoWebexTeams for MobileClients(Android & iOS) isable to locate the flaggedscreen capture shared during1-To-1 chat with CiscoWebex Teams for Windows

Locate theflagged screencapture in1-To-1 chat inCisco WebexTeams forMobile Clients




PassedNAVerify whether CiscoWebexTeams for DesktopClients(Mac & Windows)are able to invite attendeesfor a meeting from spacethrough Outlook mail fromActivity Menu for Space

Initiate aninstant meetingfrom Outlook


PassedNAVerify whether CiscoWebexTeams for DesktopClients(Mac & Windows)are able to edit the meetingschedule before the timestarts from meeting tabsuccessfully

Edit themeetingtime before thetime starts


PassedNAVerify whether CiscoWebexTeams for Android is able tojoin the meeting with CiscoWebex Teams for Windowsafter it logout and login thesame user in Android devicesuccessfully

Attend themeeting fromCisco WebexTeams for iOSafter acceptingthe mail invitefrom CiscoWebex Teamsfor Windows ofsame user


PassedNAVerify whether CiscoWebexTeams for DesktopClients(Mac & Windows)are able to join the scheduledmeeting with other CiscoWebex Teams Clients frommeeting tab successfully

Joining meetingfrom meetingtab in CiscoWebex Teamsfor DesktopClients


PassedNAVerify whether the CiscoWebex Teams for Windowsis able to cancel the CWTmeeting from the OutlookCalendar successfully andalso check the meeting linkin meetings tab

Cancel theCWT Meetingappointmentfrom OutlookCalendar andcheck itsreflected inMeeting tab


PassedNAVerify whether the CiscoWebex Teams for Desktopclients(Windows & Mac)displays all the scheduledmeetings of the currentmonth in meetings tabsuccessfully

Display all thescheduledmeetings inmeetings tab




PassedNAVerify whether CiscoWebexTeams for Desktop Clients(Windows & Mac) displaysthe Japanese notification inteam chat window whenmoderator turn on and offthe announcement mode

Notification forturn on and offannouncementin team chatwindow ofCisco WebexTeams forDesktop Clients


PassedNAVerify the file name whilesharing an image file(JPEG/PNG) in JapaneseEnvironment by themoderator of the team afterenabled the announcementmode in the teamsuccessfully

Share a file aftertheannouncementmode is enabled


PassedNAVerify whether moderator ofthe team is able to share thescreenshot after enabled theannouncement mode in theteam in JapaneseEnvironment successfully

Share thescreenshot afterenable theannouncementmode


PassedNAVerify whether participantsof the team should not sharedocument (.docx,pptx,xlsx )after enable theannouncement mode in themoderator of the team inJapanese Environmentsuccessfully.

Share thedocument fromparticipantsafter enable theannouncementmode


PassedNAVerify whether participantsof the team is able to displaythe notification in Japaneselanguage afterannouncement mode hasenabled in the moderator ofthe team successfully

Notificationdisplay inparticipantsafterannouncementmode enabledon moderator


PassedNAVerify whether theannouncement spacenotification should not beshown after originalmoderator of the team(turned on announcementmode in participant) andmade the participants asmoderator in Cisco WebexTeams for Desktop clientssuccessfully

Make aparticipant asmoderator inCisco WebexTeams forDesktop clients




PassedCiscoWebexTeams forWindows 1-> CWTCloud ->CiscoWebexTeams forWindows 2

Verify whether applicationor screen can be share during1 to 1 call in the CiscoWebex Teams for Desktopclients successfully

Shareapplicationduring 1 to 1call in CiscoWebex Teamsfor DesktopClients


PassedCiscoWebexTeams forWeb 1 ->CWTCloud ->CiscoWebexTeams forWeb 2 ->CWTCloud ->CiscoWebexTeams forWeb 3

Verify whether applicationor screen can be share duringspace call in the CiscoWebex Teams for webclients successfully

Shareapplicationduring spacecall in CiscoWebex Teamsfor web clients


PassedIP Phone A-> UnifiedCM -> IPPhone B;IPPhone A ->UnifiedCM->VCS-C-> VCS-E-> CWTCloud ->CiscoWebexTeams forWindows2






PassedCiscoWebexTeamsClient1 ->CWTCloud ->VCS-E ->VCS-C ->UnifiedCM-> IP PhoneC ->UnifiedCM-> IP PhoneD

Verify whether blind transferthe forwarded call fromCisco Webex Teams clientto IP Phone using hybrid callservice when the CallForward All is enabled onUnified CM successfully

Blind transferthe forwardedcall from CiscoWebex Teamsclient to IPPhone whenCFA enabled onUnified CM


PassedCiscoWebexTeamsClient1 ->CWTCloud ->VCS-E ->VCS-C ->UnifiedCM-> IP PhoneC ->UnifiedCM-> IP PhoneD

Verify whether consulttransfer the forwarded callfrom Cisco Webex Teamsclient to IP Phone usinghybrid call service when theCall Forward No Answer isenabled on Unified CMsuccessfully.

Consult transferthe forwardedcall from CiscoWebex Teamsclient to IPPhone whenCFNA isenabled


PassedNAVerify the joined participantin ameeting in CiscoWebexTeams for Web underactivity menu regardless ofdevices

Identify thejoinedparticipantjoined themeeting inCisco WebexTeams for Webdesktop client


PassedNAVerify Paired room devicesshow the names of everyonewho is paired to that deviceregardless of whetherthey've joined from the app,WebEx, room device orother video system

In meeting list :people whohave joined themeeting inCisco WebexTeams for Webdesktop client




PassedNAVerify meeting list mustinclude the member whohaven’t joined the meetingyet in meeting list in CiscoCWT for Web mobile clien

Not in meeting: includesmembers whohaven’t joinedthe meeting yetin Cisco CWTfor Web mobileclient


PassedNAVerify Whether CiscoWebex Teams can able toinstalling the Cisco WebexTeam with new options inMac Successfully

Installing CiscoWebex team formac from newoptions

UCJ12.5.PH3S.CWT2.0.9.G.001

PassedNAVerify whether CiscoWebexTeams can able to installingthe Cisco Webex Team withnew options in WindowsSuccessfully

Installing CiscoWebex team forWindows fromnew options

UCJ12.5.PH3S.CWT2.0.9.G.002

PassedNAVerify whether CiscoWebexTeams for Web able todisplay unsent drafts countin recents successfully

Display draftcount in recentstab of CiscoWebex Teamsfor Web

UCJ12.5.PH3S.CWT2.0.9.G.003

PassedNAVerify whether CiscoWebexTeams for Web can able todisplay draft count in 1-To-1chat message after sent itwith Cisco Webex Teamsfor Windows Clientsuccessfully

Send the draftand check thedraft count inCisco WebexTeams for Webin WindowsClient

UCJ12.5.PH3S.CWT2.0.9.G.004

PassedNAVerify whether CiscoWebexTeams for Web is able todisplay draft of @mentionsmessage during 1-To-1 chatwith Cisco Webex Teamsfor windows Clientssuccessfully

Draft of@mentionsduring Spacechat with CiscoWebex Teamsfor Web inWindows Client

UCJ12.5.PH3S.CWT2.0.9.G.008

PassedNAVerify whether CiscoWebexTeams for Web is able todisplay draft of 50 plus linesof text message during1-To-1 chat with CiscoWebex Teams for WindowsClient successfully

Draft of 50 pluslines of textduring 1-To-1chat with CiscoWebex Teamsfor Web inWindowsClients

UCJ12.5.PH3S.CWT2.0.9.G.009



PassedNAVerify whether CiscoWebexTeams for Web is able todisplay draft of 1-To-1 chatmessage after send it withCisco Webex Teams forMac Client successfully

Send the draftand check thedraft count inCisco WebexTeams for Webin Mac Client

UCJ12.5.PH3S.CWT2.0.9.G.013

PassedNAVerify Whether CiscoWebex Teams can able tocheck the Automatic updateupgrade option is ready inCisco Webex Teams forWindows Successfully

Automaticupdate optiondisplay whenthe upgrade isready inWindows

UCJ12.5.PH3S.CWT2.0.9.G.039

PassedNAVerify Whether the CiscoWebex Teams newer versionis updated after upgradingthe app in Cisco WebexTeams for Windows

Upgradedversion in aboutin Cisco WebexTeams forWindows

UCJ12.5.PH3S.CWT2.0.9.G.041

PassedNAVerify Whether can able tocheck the tool tip in theupgrade version of CiscoWebex Teams for MacSuccessfully

Tool tip forupgrade of ciscoWebex Teamsfor Mac

UCJ12.5.PH3S.CWT2.0.9.G.042

PassedNAVerify whether CiscoWebexteams can check the tool tipin the upgrade version ofCisco Webex teams forWindows Successfully

Tool tip forupgrade of ciscoWebex teamsfor Windows

UCJ12.5.PH3S.CWT2.0.9.G.043

PassedNAVerify Whether the optionto open the links using thesafari is enabled anddisabled successfully inCiscoWebex Teams for iOS

Enable andDisable theoption to openlinks usingsafari in CiscoWebex Teamsfor iOS .

UCJ12.5.PH3S.CWT2.0.9.G.044

PassedNAVerify whether CiscoWebexTeams for iOS Clients canable to share and open thelinks via Safari browserduring 1-To-1 chats withCisco Webex Teams forDesktop Clients(Windowsor Mac )

Open link viasafari aftershared the linkduring 1-to-1chat fromDesktop clientto iOS Client

UCJ12.5.PH3S.CWT2.0.9.G.045



PassedNAVerify whether CiscoWebexTeams for iOS Clients canable to receive and open thelinks via Safari browserduring 1-To-1 chats withCisco Webex Teams forMobile Clients(iOS andAndorid )

Share linksbetween 1-To-1and Open it viaSafari inMobileclients

UCJ12.5.PH3S.CWT2.0.9.G.046

PassedNAVerify whether CiscoWebexTeams for iOS Clients canable to receive and open thelink via Safari browserduring the Space chat WithCisco Webex DesktopClients(Windows and Mac)successfully

Share the Weblink in the spaceChat and Openvia Safari fromDesktop Clients

UCJ12.5.PH3S.CWT2.0.9.G.047

PassedNAVerify whether CiscoWebexTeams for iOS Clients canable to receive and open thelink via Safari browserduring the Space chat WithCisco Webex MobileClients(Android and iOS)successfully

Send the Weblink in the spacechat and Openvia Safari fromMobile Clients

UCJ12.5.PH3S.CWT2.0.9.G.048

PassedVerify whether CiscoWebexteams for iOS Clients canable to receive the links andopen the link via Safaribrowser in Team Chat fromthe Cisco Webex Teamsfrom Desktop Clientssuccessfully

Send the linksin Team Chatand open it viaSafari browserfrom DesktopClients

UCJ12.5.PH3S.CWT2.0.9.G.049

PassedNAVerify whether CiscoWebexteams for iOS Clients canable to receive the links andopen the link via Safaribrowser in Team Chat fromthe Cisco Webex Teamsfrom Mobile Clients(Android and iOS)successfully

Send the Weblinks in teamchat and open itvia safaribrowser fromMobile Clients

UCJ12.5.PH3S.CWT2.0.9.G.050



PassedCiscoWebexTeams forWindows1-> WebexCloud ->CiscoWebexTeams forMac ->WebexCloud ->CiscoWebexTeams foriOS .

Verify whether CiscoWebexTeams for iOS Clients canable to receive and open thelink via Safari browserduring the Space call WithCisco Webex DesktopClients(Windows and Mac)successfully

Send the Weblink in the spacecall and Openvia Safari fromDesktop Clients

UCJ12.5.PH3S.CWT2.0.9.G.051

PassedCiscoWebexTeams forAndroid ->WebexCloud ->CiscoWebexTeams forMac->WebexCloud ->CiscoWebexTeams foriOS

Verify whether CiscoWebexteams for iOS Clients canable to receive the links andopen the link via Safaribrowser in Team Call fromthe Cisco Webex Teamsfrom Mobile Clients(Android and iOS)successfully

Send the Weblinks in TeamCall and open itvia Safaribrowser fromMobile Clients

UCJ12.5.PH3S.CWT2.0.9.G.052

PassedNAVerify whether CiscoWebexTeams can able to share thelink with attachment in1-To-1 chat and open viasafari browser successfully.

Share the WebLink withattachmentduring 1- To -1Chat

UCJ12.5.PH3S.CWT2.0.9.G.053

PassedNAVerify whether CiscoWebexTeams can able to share thelink with attachment fromthe Team chat and open viasafari browser successfully.

Share the WebLink withattachmentduring TeamChat

UCJ12.5.PH3S.CWT2.0.9.G.054

PassedNAVerify whether CiscoWebexTeams can able flag the linksfrom the team chat and openit via Safari browsersuccessfully.

Flag the Weblinks duringteams chat andOpen it viaSafari browser

UCJ12.5.PH3S.CWT2.0.9.G.055



PassedCiscoWebexTeams forWindows1-> WebexCloud ->CiscoWebexTeams foriOS

Verify whether CiscoWebexTeams can able to Add theguest during the space calland share the web Link andopen it via safari from CiscoWebex Team successfully

Share web linkafter adding theguest during thespace call

UCJ12.5.PH3S.CWT2.0.9.G.057

PassedNAVerify whether CiscoWebexTeams for iOS Clients canable to share Link withemojis and open the links viaSafari browser during1-To-1 chats with CiscoWebex Teams for DesktopClients(Windows and Mac )

Sent the WebLink withemojis

UCJ12.5.PH3S.CWT2.0.9.G.058

PassedCiscoWebexTeams forWindows1-> WebexCloud ->CiscoWebexTeams forWindows2-> WebexCloud ->CiscoWebexTeams forMac

Verify whether CiscoWebexTeams for Mac(unjoineduser) displays thewhiteboard sharednotification during space callin the chat windowsuccessfully

Whiteboardsharednotification inunjoined CiscoWebex Teamsfor Mac userchat window

UCJ12.5.PH3S.CWT2.0.9.G.101




Verify whether CiscoWebexTeams forWindows2(unjoined user)displays the whiteboardshared notification duringspace call in the chatwindow successfully

Whiteboardsharednotification inunjoined CiscoWebex Teamsfor Windowsuser chatwindow

UCJ12.5.PH3S.CWT2.0.9.G.102


Verify whether CiscoWebexTeams for Mac(unjoineduser) displays thewhiteboard image in the filesfolder shared during spacecall successfully

Chat window ofCisco WebexTeams for Macdisplayswhiteboardimage sharedduring spacecall

UCJ12.5.PH3S.CWT2.0.9.G.103


Verify whether CiscoWebexTeams forWindows2(unjoined user)displays the whiteboardimage in the files foldershared during space callsuccessfully

Chat window ofCisco WebexTeams forWindows2displayswhiteboardimage sharedduring spacecall

UCJ12.5.PH3S.CWT2.0.9.G.104




Verify whether CiscoWebexTeams for Mac(unjoineduser) displays the Japanesetime and date withwhiteboard sharednotification during space callin the chat windowsuccessfully

Japanese timeand Date withWhiteboardsharednotification inunjoined CiscoWebex Teamsfor Mac userchat window

UCJ12.5.PH3S.CWT2.0.9.G.105

PassedCiscoWebexTeams forWindows1-> WebexCloud ->CiscoWebexTeams forWindows2

Verify whether CiscoWebexTeams forWinodws1 is ableto resume its screen whileCisco Webex Teams forWindows2 sharing its ownscreen at same time during1-To-1 call

Resume screenduring callswithin CiscoWebex Teamsfor WindowsClients

UCJ12.5.PH3S.CWT2.0.9.G.117

PassedCiscoWebexTeams forMac1 ->WebexCloud ->CiscoWebexTeams forMac2

Verify whether CiscoWebexTeams for Mac1 is able toresume its screen whileCisco Webex Teams forMac2 sharing its own screenat same time during 1-To-1call

Resume screenduring callswithin CiscoWebex Teamsfor Mac Clients

UCJ12.5.PH3S.CWT2.0.9.G.118

PassedCiscoWebexTeams forWindows-> WebexCloud ->CiscoWebexTeams forMac

Verify whether the ownscreen of Cisco WebexTeams for Windows is ableto edit while sharing during1-To-1 call with CiscoWebex Teams for Mac

Markup ourown documentwhile screensharing during1-To-1 calls inCisco WebexTeams forDesktop Clients

UCJ12.5.PH3S.CWT2.0.9.G.133




Verify whether the browserapp can able to share andedit by Cisco Webex Teamsfor Windows during 1-To-1call with Cisco WebexTeams for Mac

Markup browserapp whilescreen sharingduring 1-To-1calls in CiscoWebex Teamsfor DesktopClients

UCJ12.5.PH3S.CWT2.0.9.G.134


Verify whether the host ofthe meeting can be able todownload the marked upsnapshot of its own fromfiles in activity menu forspaces option successfullyduring 1-To-1 call withinCisco Webex Teams forDesktop Clients (Windows& Mac) successfully

Host downloadsthe marked upsnapshot during1-To-1 call

UCJ12.5.PH3S.CWT2.0.9.G.143


Verify whether theparticipant of the call can beable to download themarkedup snapshot of its own fromfiles in activity menu forspaces option successfullyduring 1-To-1 call withinCisco Webex Teams forDesktop Clients (Windows& Mac) successfully

Participantdownloads themarked upsnapshot during1-To-1 call

UCJ12.5.PH3S.CWT2.0.9.G.144


Verify whether the host ofthe meeting can be able tomark up Cisco CiscoWebexTeams app of its own screenshare successfully duringTeam Meeting within CiscoWebex Teams for DesktopClients (Windows & Mac)successfully

Host downloadsthe snapshotduring TeamMeeting inCisco WebexTeams forDesktop Clients

UCJ12.5.PH3S.CWT2.0.9.G.145




Verify whether CiscoWebexTeams for Windows canable to share the markedsnapshot to Cisco WebexTeams for Android during1-To-1 chat successfully

Share themarkedsnapshot to1-To-1 chatwith CiscoWebex Teamsfor Android

UCJ12.5.PH3S.CWT2.0.9.G.146

PassedNAVerify whether CiscoWebexTeams forWindows displaysthe recently chated people attop of the people list fromfilters during 1-To-1 chatwith Cisco Webex Teamsfor Mac successfully

Display recent1-To-1 chatpeople at top ofthe people list infilters of CiscoWebex Teamsfor Windows

UCJ12.5.PH3S.CWT2.0.9.G.153

PassedNAVerify whether CiscoWebexTeams for Mac displays therecently chated people at topof the people list from filtersduring 1-To-1 chat withCisco Webex Teams forWindows successfully

Display recent1-To-1 chatpeople at top ofthe people list infilters of CiscoWebex Teamsfor Mac

UCJ12.5.PH3S.CWT2.0.9.G.154

PassedNAVerify whether CiscoWebexTeams forWindows displaysthe spaces list from filterssuccessfully

Display spaceslist at the filtersof Cisco WebexTeams forWindows

UCJ12.5.PH3S.CWT2.0.9.G.155

PassedNAVerify whether CiscoWebexTeams for Mac displays thespaces list from filterssuccessfully

Display spaceslist at the filtersof Cisco WebexTeams for Mac

UCJ12.5.PH3S.CWT2.0.9.G.156

PassedNAVerify whether the recentlychated team is displayed atthe top of the space list fromfilters of Cisco WebexTeams for Windowssuccessfully

Recent Teamchat list isdisplayed at topof the space listin filter of CiscoWebex Teamsfor Windows

UCJ12.5.PH3S.CWT2.0.9.G.157




Verify whether the recentlychated team is displayed atthe top of the space list fromfilters of Cisco WebexTeams for Mac successfully

Recent Teamchat list isdisplayed at topof the space listin filter of CiscoWebex Teamsfor Mac

UCJ12.5.PH3S.CWT2.0.9.G.158

PassedCiscoWebexTeams forMac ->WebexCloud ->CiscoWebexTeams forWindows1-> WebexCloud ->CiscoWebexTeams forWindows2

Verify whether the recentlyescalated Team Meetingname is displayed at the topof the space list from filtersof Cisco Webex Teams forWindows successfully

Recent TeamMeeting name isdisplayed at topof the space listof filters inCisco WebexTeams forWindows

UCJ12.5.PH3S.CWT2.0.9.G.159

PassedNAVerify whether the recentlyescalated Team Meetingname is displayed at the topof the space list from filtersof Cisco Webex Teams forMac successfully

Recent TeamMeeting name isdisplayed at topof the space listof filters inCisco WebexTeams for Mac

UCJ12.5.PH3S.CWT2.0.9.G.160

PassedNAVerify whether the recentlywhiteboard shared teamname is displayed at the topof the space list from filtersof Cisco Webex Teams forMac successfully

Recentlywhiteboardshared Teamname isdisplayed at topof the space listin filter of CiscoWebex Teamsfor Mac

UCJ12.5.PH3S.CWT2.0.9.G.161



PassedNAVerify whether the recentlywhiteboard shared teamname is displayed at the topof the space list from filtersof Cisco Webex Teams forWindows successfully

Recentlywhiteboardshared Teamname isdisplayed at topof the space listin filter of CiscoWebex Teamsfor Windows

UCJ12.5.PH3S.CWT2.0.9.G.162

PassedNAVerify whether CiscoWebexTeams for Android displaysthe recently chated people attop of the people list fromfilters during 1-To-1 chatwith Cisco Webex Teamsfor Windows successfully

Recent 1-To-1chat at top ofthe people list inCisco WebexTeams forAndroid

UCJ12.5.PH3S.CWT2.0.9.G.163

PassedNAVerify whether CiscoWebexTeams for iPhone displaysthe recently chated people attop of the people list fromfilters during 1-To-1 chatwith Cisco Webex Teamsfor Windows successfully

Recent 1-To-1chat at top ofthe people list inCisco WebexTeams foriPhone

UCJ12.5.PH3S.CWT2.0.9.G.164

PassedNAVerify whether CiscoWebexTeams for iPad displays therecently chated people at topof the people list from filtersduring 1-To-1 chat withCisco Webex Teams forWindows successfully

Recent 1-To-1chat at top ofthe people list inCisco WebexTeams for iPad

UCJ12.5.PH3S.CWT2.0.9.G.165

PassedNAVerify whether Active statusof Cisco Webex Teamsmember is able to view inOutlook once enabled“Connect toOutlook” settingin Cisco Webex TeamsSuccessfully.

View the activestatus of theCisco WebexTeams memberin Outlook

UCJ12.5SEFT.CWT4.0.G.001

PassedNAVerify whether DND statusof Cisco Webex Teamsmember is able to view inOutlook once enabled“Connect toOutlook” settingSuccessfully

View the DNDstatus of theCisco WebexTeams memberin Outlook




PassedNAVerify whether Offlinestatus of Cisco WebexTeams member is able toview in Outlook onceenabled “Connect toOutlook” settingSuccessfully.

View the offlinestatus of theCisco WebexTeams memberfrom theOutlook


PassedNAVerify Whether CiscoWebex Teams can able toreceive the chat from theOutlook successfully.

Initiate ChatfromOutlook tothe CiscoWebex Teams


PassedMicrosoftExchangeClient->WebexMeetings ->CiscoWebexTeams

Verify Whether CiscoWebex Teams can able toreceive call from theOutlook successfully.

Initiate callfromOutlook tothe CiscoWebex Teams


PassedNAVerify Whether CiscoWebex Teams can able tocreate a new space whileinitiate the instant messagefrom Outlook successfully.

Initiate theinstant messagefrom theOutlook bycreating newspace in CiscoWebex Teams


PassedNAVerify Whether CiscoWebex Teams can able todiscard the new space whileselect “discard the newspace” in OutlookSuccessfully.

Discard the newspace afterinitiating theInstantMessagefrom theOutlook


PassedMicrosoftExchangeClient->WebexCloud ->CiscoWebexTeams

VerifyWhether Outlook canable to initiate the video calland turn off the video inCisco Webex Teamssuccessfully.

Turn off theVideo onceinitiating thevideo call fromOutlook toCisco WebexTeams



Verify whether CiscoWebexTeams is able to mute thecall after initiating video callfrom Outlook to CiscoWebex Teams Successfully.

Mute the callfromOutlook toCisco WebexTeams.





VerifyWhether Outlook canable to initiate the video Calland Share the screen fromCisco Webex TeamsSuccessfully.

Share the screenduring videocall in CiscoWebex Teams



VerifyWhether Outlook canable to start the call andshare the screen and capturethe snapshot of the screen inCisco Webex Teamssuccessfully.

Share the screenand capture thesnapshot aftercall initiatedfrom Outlook


PassedNAVerifyWhether schedule themeeting and send meetinginvite fromOutlook to CiscoWebex Teams successfully.

Schedule themeeting fromOutlook toCisco WebexTeams


PassedNAVerifyWhether Outlook canable to edit and reschedulethe meeting by sendinginvite to Cisco WebexTeams successfully.

Edit andreschedule themeeting fromOutlook


PassedNAVerifyWhether Outlook canable to send the instantmessage to Cisco WebexTeams when in away orDND status successfully.

Send the InstantMessage fromOutlook whenpeople is awayor DND Status


PassedCiscoWebexTeams forWeb Client1 -> WebexCloud ->CiscoWebexTeams forWeb Client2

Verifywhether CiscoWebex Teamsfor Web Client (Chrome)able to send messagesuccessfully during one toone call

Send messageduring one toone call in WebClients





Verifywhether CiscoWebex Teamsfor Web Client (Chrome)able to share whiteboardsuccessfully during one toone call

Sharewhiteboardduring one toone call in WebClients



Verifywhether CiscoWebex Teamsfor Web Client (Chrome)able to send GIF file duringspace call successfully

Send GIF fileduring one toone call in WebClients



Verifywhether CiscoWebex Teamsfor Web Client (Chrome) isable to initiate meetingsuccessfully

Initiate meetingin Web Clients



Verifywhether CiscoWebex Teamsfor Web Client able to sharewhiteboard during space callsuccessfully

Sharewhiteboard inspace call inWeb Clients




PassedCiscoWebexTeams forWeb Client-> WebexCloud ->CiscoWebexTeams forWeb Client2

Verifywhether CiscoWebex Teamsfor Web Client able to sendall file formats(PDF,PNG,PPT) during oneto one successfully

Send all fileformats duringone to one callin web Clients



Verifywhether CiscoWebex Teamsfor Web Client able to sendMarkdown bold messagesuccessfully during one toone call

SendMarkdownbold messageduring one toone call in WebClients


PassedCiscoWebexTeamsclient 1 ->WebexCloud ->CiscoWebexTeamsClient 2

Verify whether unreadmessages of team chat canbe viewed under the searchbar during the call in CiscoWebex Teams successfully

View unreadmessage ofTeam chatduring the call

UCJ12.5SEFT.CWT.G.202

PassedNAVerify whether unreadmessages of team chat using@mentions in Cisco WebexTeams successfully

View unreadmessage using@mentions




PassedCiscoWebexTeamsclient 1 ->WebexCloud ->CiscoWebexTeamsClient 2 ->WebexCloud ->CiscoWebexTeamsClient 3

Verify whether unreadmessage can be viewedduring space call CiscoWebex Teams successfully

View the unreadmessage duringspace call


PassedNAVerify whether GIF file canbe shared during 1 to 1 chatin the Cisco Webex Teamsfor Desktop Clientssuccessfully

Share the GIFfile in CiscoWebex Teamsfor DesktopClients


PassedNAVerify whether GIF file canbe shared during space chatin the Cisco Webex TeamsforWeb Clients successfully

Share the GIFfile in CiscoWebex Teamsfor Web clients


PassedNAVerify whether GIF file canbe viewed under unreadmessages during space chatin the Cisco Webex Teamsfor Desktop Clientssuccessfully

View the unreadGIF file inCisco WebexTeams forDesktop clients


PassedIP Phone A-> UnifiedCM -> IPPhone B ,IP Phone A-> UnifiedCM->VCS-C-> VCS-E-> WebexCloud ->CiscoWebexTeams forWindows2

Verify whether CiscoWebexTeams forWindows2 is ableto attend the incoming callfrom Cisco IP Phone Ausing redial successfully

Redial a call inCisco IP Phone

UCJ12.0SPhII.CWT.G.070



PassedIP Phone A-> UnifiedCM -> IPPhone B ,IPPhone A ->UnifiedCM->VCS-C-> VCS-E-> WebexCloud ->CiscoWebexTeams forWindows2




PassedIP Phone A-> UnifiedCM -> IPPhone B ,IP Phone A(redial) ->UnifiedCM->VCS-C-> VCS-E-> WebexCloud ->CiscoWebexTeams forWindows2, IP PhoneB ->UnifiedCM-> IP PhoneC

Verify whether CiscoWebexTeams forWindows2 is ableto attend the incoming callfrom Cisco IP Phone Ausing redial and also CiscoIP Phone B is able totransfer the redialed call toCisco IP Phone Csuccessfully

Transfer theredialed call inCisco IP Phone


PassedIP Phone A-> UnifiedCM ->VCS-C ->VCS-E ->WebexCloud ->CiscoWebexTeams forMac

Verify whether CiscoWebexTeams for Mac is able toattend the incoming callfrom Cisco IP Phone Ausing speed dial successfullywhen (Cisco IP Phone B &C is in shared line)

Speed Dial withShared line inIP Phone




PassedIP Phone A-> UnifiedCM ->VCS-C ->VCS-E ->WebexCloud ->CiscoWebexTeams forMac

Verify whether Cisco IPPhone A is able to hold andresume the call of CiscoWebex Teams for Macsuccessfully using speed dialwhen (Cisco IP Phone B &C is in shared line)

Hold andResume the callin IP Phonewhen it is inshared line


Cisco Webex MeetingsDefectsStatusCall

ComponentFlow


PassedNAVerify whether CiscoJabber for iOS(iPhone& iPad) is able toupload avatar duringWebEx meeting withCisco Jabber forWindows successfully

Uploadingavatar duringWebExmeetingin Cisco Jabberfor iOS

UCJ12.5SPHI.CJWWM.G.012

PassedNAVerify whether CiscoJabber for iOS(iPhone& iPad) is able toupload an avatar bytaking a photo duringWebEx meeting withCisco Jabber forWindows successfully

Upload avatarby taking aphoto duringWebExmeetingin Cisco Jabberfor iOS


PassedNAVerify whether CiscoJabber for iOS(iPhone& iPad) is able toremove an avatarduring WebExmeeting with CiscoJabber for Windowssuccessfully

Removingavatar duringWebExmeetingin Cisco Jabberfor iOS



Test Results SummaryCisco Webex Meetings

PassedNAVerify whether CiscoJabber for iOS(iPhone& iPad) displaysprofile name lettersavatar during WebExmeeting with CiscoJabber for Windowssuccessfully

Display profilename lettersduring WebExmeeting inCisco Jabber foriOS


PassedNAVerify whether CiscoJabber for iOS(iPhone& iPad) displays theoptimized video layoutfor 1-To-1 WebExmeeting with CiscoJabber for Windowssuccessfully duringpoor networkconnectivity

Optimizedvideo display ofboth participantduring poornetworkconnectivity inCisco Jabber foriOS


PassedNAVerify whether CiscoJabber for iOS(iPhone& iPad) displays theinitial if Cisco Jabberfor Windows disablesthe video duringWebEx meeting

Displayparticipantinitials duringWebExmeetingin Cisco Jabberfor iOS


PassedNAVerify whether CiscoJabber for iOS(iPhone& iPad) displays thefull screen view duringWebEx meeting withCisco Jabber forWindows successfully

Full screen viewof host duringWebExmeeting


PassedNAVerify whether CiscoJabber for iOS(iPhone& iPad) is able to swapthe screen successfullyduring WebExmeeting with CiscoJabber for Windows

Swap screenview of hostduring WebExmeeting


PassedNAVerify whether it ispossible to Join anymeeting by enteringthe video address fromthe calendar invite inthe Join aMeeting boxof the Cisco Spark forWindows

Startedindication in aWebExmeetingthat is beingrecorded




PassedNAVerify whether it ispossible to Join anymeeting by enteringthe video address fromthe calendar invite inthe Join aMeeting boxof the Cisco Spark forWeb

Pausedindication in aWebExmeetingthat is beingrecorded


PassedNAVerify whether CiscoJabber for iPhone isable to lock the roomfrom more optionduring WebExmeeting with CiscoJabber for Windowssuccessfully

Lock personalmeeting roomfrom moreoption duringWebExmeetingwith CiscoJabber forWindows


PassedNAVerify whether CiscoJabber for iPhone isable to change newavatar during WebExmeeting with CiscoJabber for Windowssuccessfully

ChangingAvatar duringWeb Exmeeting inCisco Jabber foriPhone


PassedNAVerify whether CiscoJabber for iPhone isable to record the ongoing meeting frommore option duringWebEx meeting withCisco Jabber forWindows successfully

Record themeeting frommore optionduring WebExmeeting withCisco Jabber forWindows


PassedNAVerify whether CiscoJabber for iPhone isable to view the videoof Cisco Jabber forWindows duringcontent sharesuccessfully

Participantvideo displayedin same screenduring contentshare in CiscoJabber foriPhone


PassedNAVerify whether CiscoWebex Cloud can ableto record the meetingin CiscoWebex Cloudfor iOS Successfully

Record themeeting in theCisco WebexCloud for iOS

UCJ12.5.PH3S.CJWWM.G.001



PassedNAVerify whether CiscoWebex Cloud can ableto record the meetingin CiscoWebex Cloudfor Androidsuccessfully

Record themeeting in theCisco WebexCloud forAndroid


PassedNAVerify Whether CiscoWebexCloudCan ablePlayback the recordedmeeting in CiscoWebex Cloud in iOSsuccessfully

Playback theRecordedmeeting inCisco WebexCloud in iOS


PassedNAVerify Whether CiscoWebexCloudCan ablePlayback the recordedmeeting in CiscoWebex Cloud inAndroid successfully

Playback theRecordedmeeting inCisco WebexClouds inAndroid


PassedNAVerify Whether CiscoWebex Cloud can ableto list the recordedmeeting in CiscoWebex Cloud for iOSsuccessfully.

List theRecordedmeeting inCisco WebexCloud for iOS


PassedNAVerify Whether CiscoWebex Cloud can ableto list the recordedmeeting in CiscoWebex Cloud forAndroid successfully.

List theRecordedmeeting inCisco WebexCloud forAndroid


PassedNAVerify Whether CiscoWebex Clouds canShare the recordmeeting via CiscoWebex Teams in CiscoWebex Cloud for iOSsuccessfully.

Share theRecordedmeetings viaCisco WebexTeams in CiscoWebex Cloud iniOS


PassedNAVerify Whether CiscoWebex Clouds canShare the Meeting viaCisco Webex Teamsin CiscoWebex Cloudfor Androidsuccessfully.

Share theRecordedmeetings viaCisco WebexTeams in CiscoWebex Cloud inAndroid




PassedNAVerify Whether CiscoWebex Clouds canable to play therecorded meetingreceived via CiscoWebex Teams in CiscoWebex Cloud for iOSsuccessfully.

Play theRecordedmeetingreceived viaCisco WebexTeams in CiscoWebex Cloud iniOS


PassedNAVerify Whether CiscoWebex Clouds canable to play therecorded meetingreceived via CiscoWebex Teams in CiscoWebex Cloud forAndroid successfully.

Play theRecordedmeetingreceived viaCisco WebexTeams in CiscoWebex Cloud inAndroid


PassedNAVerify Whether CiscoWebex Clouds canable to download therecorded meetingreceived via CiscoWebex Teams in CiscoWebex Cloud for iOSsuccessfully.

Download theRecordedmeetingreceived viaCisco WebexTeams in CiscoWebex Cloud iniOS


PassedNAVerify Whether CiscoWebex Clouds canable to play downloadthe recorded meetingreceived via CiscoWebex Teams in CiscoWebex Cloud forAndroid successfully.

Download theRecordedmeetingreceived viaCisco WebexTeams in CiscoWebex Cloud inAndroid


PassedNAVerify Whether CiscoWebexCloudCan ableto delete the recordedmeeting in CiscoWebex Cloud in iOSsuccessfully

Delete theRecordedmeeting inCisco WebexClouds in iOS


PassedNAVerify Whether CiscoWebex Clouds canshare the meeting viamail in Cisco WebexCloud for iOSsuccessfully.

Share therecordedmeetings viamail in CiscoWebex Cloud iniOS




PassedNAVerify Whether CiscoWebex Clouds canShare the Meeting viamail in Cisco WebexCloud for androidsuccessfully.

Share theRecordedmeetings viamail in CiscoWebex Cloud inAndroid


PassedNAVerify Whether therecorded meeting canable to playback withincorrect recordedmeeting password inCiscoWebex Cloud iniOS

Playback therecordedmeeting withincorrectrecordingpassword inCisco WebexClouds in iOS


PassedNAVerify Whether therecorded meeting canable to playback withincorrect recordedmeeting password inCiscoWebex Cloud inandroid

Playback therecordedmeeting withincorrectrecordingpassword inCisco WebexClouds inandroid


PassedNAVerify Whether CiscoWebex TeamsMeeting can edit in theSpace Name fromWindows and displayin CiscoWebex Cloudfor iOS Clientssuccessfully

Edit the CiscoWebex TeamsMeeting inSpace fromWindows anddisplay in CiscoWebex Cloudfor iOS Clients


PassedNAVerify whethermeeting list displayedafter the Cisco WebexTeams meeting listends in the CiscoWebex Cloud for iOSClients successfully

Display ofmeeting listafter end thecisco webexmeeting


PassedNAVerify Whether CiscoWebex Clouds canable share the Powerpoint presentation inCisco Webex Cloudfor iOS Successfully

Share the PowerPointPresentation




PassedNAVerify Whether CiscoWebex Cloud havescreen resolutionwhilesharing the Powerpoint presentation inCisco Webex Cloudfor iOS Successfully

Screenresolution whilesharing thePower PointPresentation


PassedNAVerify Whether CiscoWebex Cloud can ableto highlight the contentof the Power pointpresentation in CiscoWebex Cloud for iOSSuccessfully

Highlight whilesharing thePower PointPresentation


PassedNAVerify Whether CiscoWebex Cloud can ableto add the participantwhile sharing thePower pointpresentation in CiscoWebex Cloud for iOSsuccessfully

Add theparticipantwhile sharingthe Power PointPresentation


PassedNAVerify Whether CiscoWebex Cloud can ableto expel the participantwhile sharing thePower pointpresentation in CiscoWebex Cloud for iOSsuccessfully

Expel theparticipantwhile sharingthe Power PointPresentation


PassedNAVerify whethermeeting can bescheduled fromWindows web appsuccessfully

Schedule ameeting fromWindows Webapp

UCJ12.5SEFT.CJWWM.G.101

PassedNAVerify whetherparticipant can bemuted during themeeting initiated viaWindows web appsuccessfully

Mute byparticipantduring themeetinginitiated viaWindows webapp


PassedNAVerify whether assignas host while leave themeeting which isinitiated via windowsweb app successfully

Assign host andleave themeetinginitiated viaWindows webapp




PassedNAVerify whether jointhe meeting using thesafari web appsuccessfully when themeeting has beeninitiated via Windowsweb app

Join themeetingusing safari webapp


PassedNAVerify whetherreclaim host using hostkey by the participantduring the meeting inSafari web appsuccessfully

Reclaim hostusing host keyduring themeeting insafari web app


PassedNAVerify whether chatwith All is able to beperformed by hostduring the meeting insafari web appsuccessfully

Chat with Allby host duringthe meeting insafari web app


PassedNAVerify whether changerole to host forparticipant during themeeting in safari webapp successfully

Change role tohost forparticipantduring themeeting insafari web app


PassedNAVerify whetherinitiating the one toone chat with host byparticipant during themeeting in safari webapp successfully

Initiate the oneto one chat withhost byparticipantduring themeeting insafari web app


PassedNAVerify whether hostcan make himself aspresenter during themeeting initiated viaWindows web appsuccessfully

Host can makehimself aspresenter duringthe meetinginitiated viaWindows webapp


PassedNAVerify whether hostcan mute theparticipant during themeeting in safari webapp successfully

Host can mutethe participantsduring themeeting insafari web app




PassedNAVerify whether end thescheduled meeting byhost in safari web appsuccessfully

End thescheduledmeeting by hostin safari webapp


PassedNAVerify whetherrecording thescheduled meeting byparticipant in windowsweb app successfully

Record thescheduledmeeting byparticipant inWindows webapp


PassedNAVerify whether CiscoWebex Meetings foriOS can able to sharethe content with textannotate toolsuccessfully

Text annotate inthe contentsharing fromCisco WebexMeetings foriOS device


PassedNAVerify whether CiscoWebex Meetings forAndroid can able usearrow annoatate tool tomark arrow in CiscoWebex Meetingsuccessfully

Annotate thescreen share bymark arrow inCisco WebexMeetings forAndroid.


PassedNAVerify whether CiscoWebex Meetings foriOS can able tohighlight the elementby using pen annotatetool in content sharingsuccessfully

Highlight theelement inContent sharingfrom CiscoWebexMeetings foriPhone


PassedNAVerify whether CiscoWebex Meetings foriOS can able to typethe text in the sharedcontent in CiscoWebex Meetingssuccessfully

Text in theshared contentfrom CiscoWebexMeetings fromiOS


PassedNAVerify whether CiscoWebex Meetings forAndroid can able tochange the point arrowdirection in screenshare successfully.

Change thepointer arrowdirection inCisco WebexMeetings forAndroid




PassedNAVerify whether CiscoWebex Meetings foriOS can able toannotate with the laserannotation tool in theshared contentsuccessfully.

Annotate withPointerannotation tool


PassedNAVerify whether CiscoWebex Meetings canable to send the chatmessage to all whilesharing the screenwithannotation toolsuccessfully.

Sent the chatmessage to allwhile sharingthe screen withannotation tool


PassedNAVerify whether CiscoWebex Meetings forAndroid host can ableto expel the participantsharing the screenwithannotationsuccessfully.

Expel theparticipant bythe host whilesharing thescreen withannotation


PassedNAVerify whether CiscoWebex Meetings forAndroid host can ableto send the chatmessage @mentionwhile participantsharing he screen withannotationsuccessfully

Sent the chatmessage@mentionwhile sharingthe screen withannotation tool


PassedNAVerify whether CiscoWebex Meetings forAndroid can able toallow let anyone canannotate the screensuccessfully.

Let anyone canannotate thescreen from theandroid


PassedNAVerify whether CiscoWebex Meetings forAndroid can abledecline the annotationrequest from the hostsuccessfully.

Decline theannotationrequest from thehost




PassedNAVerify whether CiscoWebex Meetings forAndroid can able toannotate the screenonce annotated requestis accepted for the hostby the presentersuccessfully.

Annotate thescreen onceaccepted theannotationrequest for thehost


PassedNAVerify whether CiscoWebex Meetings forAndroid host can ableto erase the annotationdone by the presentersuccessfully.

Erase theannotation doneby the host inthe screen


PassedNAVerify whether CiscoWebex Meetings foriPad can able toinitiate the meetingand view theparticipants in the gridview successfully.

Initiate themeeting andview theParticipants ingrid view


PassedNAVerify whether CiscoWebex Meetings foriPad can able to mutethe audio of the user ingrid view successfully

Mute the audioof the users ingrid view


PassedNAVerify whether CiscoWebex Meetings foriPad can able to recordthe meeting in gridview successfully.

Record themeeting in thegrid view


PassedNAVerify whether CiscoWebex Meetings foriPad can able to chatwith all theparticipants in the gridview successfully

Chat with allthe participantsin the grid view


PassedNAVerify whether CiscoWebex Meetings forAndroid can able tosearch the Personalroom from googlesuccessfully

Search Personalroom in googlesearch fromCisco WebexMeetings forAndroid




PassedNAVerify whether CiscoWebex Meetings forAndroid can able tosearch the ciscoWebex Meetings fromgoogle Personal andopen the Cisco WebexMeetings home pagesuccessfully

Open CiscoWebexMeetings homepage bysearching forCisco WebexMeetings ingoogle personal.


PassedNAVerify whether CiscoWebex Meetings forAndroid can able totap to join the meetingdirectly from googlesuccessfully

Join themeetingdirectly ingoogle fromCisco WebexMeetings forAndroid


PassedNAVerify whether CiscoWebex Meetings forAndroid can able totap the view therecording directlyfrom googlesuccessfully

View therecordingdirectly ingoogle fromCisco WebexMeeting forAndroid


PassedNAVerify whether CiscoWebex Meetings forWindows can able todetect automaticallywith nearby videodevice successfully

Automaticallydetect thenearby videodevice with theCisco WebexMeetings forWindows


CSCvk44700FailedNAVerify whether CiscoWebex Cloud forWindows able to addthe attendee into theinstantWebexmeetingthrough web appsuccessfully

Add “inviteattendee”feature is notthere in CiscoWebex forWindows WebApp


Cisco Webex Room OSDefectsStatusCall Component



Test Results SummaryCisco Webex Room OS

PassedRoom device(SX80 Codec) ->Cisco WebexCloud -> Webexfor iOS

Verify whetherPeople Countin CiscoWebex roomdevice (SX80Codec)connectedwithCisco WebexQuad cameraduring videocall with userlogged toWebex foriOS, bothregistered withCisco WebexCloud workssuccessfullyunder Japaneseenvironment

CheckPeopleCount underJapaneseenvironmentin roomdevice(SX80Codec)connectedwith WebexQuadcameraduringvideo callwith userlogged toWebex foriOS

UCJ12.5SPhI.RoomOS.G.001

PassedRoom device(SX80 Codec) ->Cisco WebexCloud -> Roomdevice (MX200G2)

Verify whetherPeople Countin CiscoWebex roomdevice (SX80Codec)connectedwithCisco WebexQuad cameraduring videocall with CiscoWebex roomdevice(MX200G2), bothregistered withCisco WebexCloud workssuccessfullyunder Japaneseenvironment

CheckPeopleCount underJapaneseenvironmentin roomdevice(SX80Codec)connectedwith WebexQuadcameraduringvideo callwith roomdevice(MX200G2)




PassedRoom device(SX80 Codec) ->Cisco WebexCloud -> WebexforWindows(pairedwith WebexRoom Kit Plus)

Verify whetherPeople Countfeature inCisco Webexroom device(SX80 Codec)connectedwithCisco WebexQuad cameraduring videocall withWebex forWindowspaired withCisco WebexRoom KitPlus, allregistered withCisco WebexCloud workssuccessfullyunder Japaneseenvironment

CheckPeopleCount underJapaneseenvironmentin roomdevice(SX80Codec)connectedto WebexQuadCameraduringvideo callwith WebexforWindowspaired toWebexRoom KitPlus


PassedRoom device(SX80 Codec) ->Cisco WebexCloud -> Webexfor Mac(pairedwith WebexRoom Kit Plus)

Verify whetherPeople Countfeature inCisco Webexroom device(SX80 Codec)connectedwithCisco WebexQuad cameraduring videocall withWebex forMac pairedwith CiscoWebex roomdevice(DX80),all registeredwith CiscoWebex Cloudworkssuccessfullyunder Japaneseenvironment

CheckPeopleCount underJapaneseenvironmentin roomdevice(SX80Codec)connectedto WebexQuadCameraduringvideo callwith Webexfor Macpaired toroomdevice(DX80)




PassedRoom device(SX80 Codec) ->Cisco WebexCloud -> Roomdevice (DX80)

Verify whetherincoming callfrom CiscoWebex roomdevice(SX80Codec)connectedwithCisco WebexQuad cameracan beanswered inheadset pairedto CiscoWebex roomdevice(DX80)in Japaneseenvironmentvia Bluetoothsuccessfully,both registeredto CiscoWebex Cloud

Answer theincomingcall fromroomdevice(SX80Codec)connectedwith WebexQuadcamera inheadsetpaired toroomdevice(DX80)underJapaneseenvironment


PassedRoom device(SX80 Codec)(connected withWebex Quadcamera) -> CiscoWebex Cloud ->Room device(DX80)

Verify whetherthe audio ofCisco Webexroomdevice(SX80Codec)connectedwithCisco WebexQuad cameracan be heardvia headsetpaired to CiscoWebex roomdevice(DX80)in Japaneseenvironmentvia Bluetoothduring videocall

Checkaudio ofroomdevice(SX80Codec)connectedwith WebexQuadcamera inheadsetpaired toroomdevice(DX80)underJapaneseenvironment




PassedRoom device(SX80 Codec) ->Cisco WebexCloud -> Roomdevice (DX80)

Verify whetherincoming callfrom CiscoWebex roomdevice(SX80Codec)connectedwithCisco WebexQuad camerain Japaneseenvironmentcan bedeclined inheadset pairedto CiscoWebex roomdevice(DX80)via Bluetoothsuccessfully,all registeredto CiscoWebex Cloud

Decline theincomingcall inJapaneseenvironmentfrom roomdevice(SX80Codec)connectedwith WebexQuadcamera inheadsetpaired toroomdevice(DX80)


PassedNAVerify whetherSnap towhiteboardoption isavailable undersettings tab inCiscoTelePresenceTouch 10 ofCisco WebexRoom Kit inJapaneseenvironment

Check Snaptowhiteboardoption inTouch 10 ofWebexRoomKit inJapaneseenvironment




PassedNAVerify whether'Switch toimperial units'option inDistance towhiteboardpage under'Snap towhiteboard' tabis availableunder settingstab in CiscoTelePresenceTouch 10 ofCisco WebexRoomKit Plusin Japaneseenvironment

Check'Switch toimperialunits' optionin Distancetowhiteboardpage fromTouch 10 ofWebexRoom KitPlus inJapaneseenvironment


PassedWebex Room Kit-> Cisco WebexCloud -> Webexfor iOS Webexfor iOS -> Add ->Cisco WebexCloud -> Webexfor Windows

Verify whetherPeople Countin Japaneseenvironmentduring Webexmeetingbetween CiscoWebex RoomKit, CiscoWebex for iOSuser and CiscoWebex forWindows userworkssuccessfully

CheckPeopleCount inJapaneseenvironmentduringWebexmeetingbetweenWebexRoom Kit,Webex foriOS userand WebexforWindowsuser




PassedWebex Room KitPlus -> CiscoWebex Cloud ->Webex for iOS(pairedwith roomdevice (DX80))

Verify whetherPeople Countin CiscoWebex RoomKit Plus underJapaneseenvironmentduring a videocall withWebex for iOSpaired withCisco Webexroomdevice(DX80),all registeredwith CiscoWebex Cloudworkssuccessfully

CheckPeopleCount inWebexRoom KitPlus underJapaneseenvironmentduringvideo callwith Webexfor iOSpaired withroomdevice(DX80)


PassedWebex Room KitPlus -> CiscoWebex Cloud ->Webex forWindows (pairedwith room device(SX10 QuickSet))

Verify whetherPeople Countin CiscoWebex RoomKit Plus underJapaneseenvironmentduring a videocall withWebex forWindowspaired withCisco Webexroomdevice(SX10Quick Set), allregistered withCisco WebexCloud workssuccessfully

CheckPeopleCount inWebexRoom KitPlus underJapaneseenvironmentduringvideo callwith WebexforWindowspaired withroomdevice(SX10Quick Set)




PassedNAVerify whetherPeople Countunder awakecondition inCisco WebexRoom Kitregistered toCisco WebexCloud workssuccessfullyunder Japaneseenvironment

CheckPeopleCount underawakecondition inWebexRoom KitunderJapaneseenvironment


PassedNAVerify whetherPeople Countduringpresentationlocal previewin CiscoWebex RoomKit registeredto CiscoWebex Cloudworkssuccessfullyunder Japaneseemvironment

CheckPeopleCountduringpresentationlocalpreview inWebexRoom KitunderJapaneseenvironment


PassedNAVerify whetherPeople Countunder awakestate in CiscoWebex RoomKit Plusregistered withCisco WebexCloud workssuccessfullyunder Japaneseenvironment

CheckPeopleCount underawake statein WebexRoom KitPlus underJapaneseenvironment




PassedNAVerify whetheruser is able toview errormessage inJapanese whenwrongusername/passwordis entered in'Proxy settings'from CiscoTelePresenceTouch 10 ofCisco WebexRoom Kitregistered toCisco WebexCloud

Verify errormessage inJapanese forincorrectProxysettings inWebexRoom Kit


PassedRoomdevice(SX20Quick Set)(Presentationsharing)-> CiscoWebex Cloud ->Webex forAndroid(Pairedwith WebexRoom Kit)

Verify whetherpresentationsharing fromCisco Webexroom device(SX20 QuickSet) registeredwith CiscoWebex Cloudto CiscoWebex RoomKit paired withCisco Webexfor Androidworkssuccessfullyunder Japaneseenvironment

Presentationsharingfrom roomdevice(SX20Quick Set)to WebexRoom Kitpaired withWebex forAndroidunderJapaneseenvironment




PassedWebex for iOS(Pairedwith roomdevice(MX300G2)) -> WebexCloud -> WebexRoom Kit(wireless sharing)

Verify whetherwirelesssharing fromCisco WebexRoom Kitpaired withCisco Webexfor Windowsduring videocall with CiscoWebex for iOSpaired withCisco Webexroomdevice(MX300G2) registeredto CiscoWebex Cloudworkssuccessfullyunder Japaneseenvironment

Wirelesssharingfrom roomdevice(WebexRoom Kit)paired withWebex forWindowsduringvideo callwith Webexfor iOSpaired withroomdevice(MX300G2) underJapaneseenvironment


PassedRoomdevice(DX70) ->Cisco WebexCloud -> WebexforWindows(Pairedwith WebexRoom Kit)

Verify whethervideo call ofCisco Webexroomdevice(DX70)can be movedfrom CiscoWebex forWindows toCisco WebexRoom Kitwhen CiscoWebex forWindows ispaired withCisco WebexRoom Kit inJapaneseenvironmentsuccessfully

Move thevideo call ofroomdevice(DX70)fromWebex forWindows toWebexRoomKit inJapaneseenvironment




PassedRoomdevice(DX70)(Pairedwith Bluetoothheadset) -> CiscoWebex Cloud ->Roomdevice(SX10Quick Set)

Verify whethermuteindication forCisco Webexroomdevice(DX70)is availableunderparticipants listof CiscoWebex roomdevice(SX10Quick Set) inJapaneseenvironmentwhen CiscoWebex roomdevice(DX70)is muted fromheadset pairedvia Bluetooth

Check muteindicationunderJapaneseenvironmentin roomdevice(SX10Quick Set)when roomdevice(DX70)is mutedfromheadsetpaired viaBluetooth


PassedWebex Room Kit-> Cisco WebexCloud -> Webexfor iOS Webexfor iOS -> Add ->Cisco WebexCloud -> Webexfor Windows

Verify whetherCisco Webexmeetingbetween CiscoWebex RoomKit registeredto CiscoWebex Cloud,Cisco Webexfor iOS userand CiscoWebex forWindows userworkssuccessfullyunder Japaneseenvironment

CheckCiscoWebexmeetingbetweenWebexRoom Kit,Webex foriOS userand WebexforWindowsuser underJapaneseenvironment




PassedRoomdevice(DX70)(Presentationsharing) -> CiscoWebex Cloud ->Webex for iOSWebex for iOS ->Add -> CiscoWebex Cloud ->Webex forAndroid

Verify whetherPresentationsharing fromCisco Webexroomdevice(DX70)in a CiscoWebexmeetingbetween CiscoWebex roomdevice(DX70)registered toCisco WebexCloud, CiscoWebex for iOSuser and CiscoWebex forAndroid userworkssuccessfullyunder Japaneseenvironment

PresentationsharingunderJapaneseenvironmentduringWebexmeetingbetweenroomdevice(DX70),Webex foriOS userand Webexfor Androiduser


PassedWebex Room Kit(Presentationsharing) -> CiscoWebex Cloud ->Webex forAndroid Webexfor Android ->Add -> CiscoWebex Cloud ->Webex forWindows

Verify whetherPresentationsharing fromCisco WebexRoom Kit in aCisco Webexmeetingbetween CiscoWebex RoomKit registeredto CiscoWebex Cloud,Cisco Webexfor Androiduser and CiscoWebex forWindows userworkssuccessfullyunder Japaneseenvironment

PresentationsharingunderJapaneseenvironmentduringWebexmeetingbetweenWebexRoom Kit,Webex forAndroiduser andWebex forWindowsuser




PassedRoom device(SX10Quick Set)(Presentationsharing) -> CiscoWebex Cloud ->Webex for Mac

Verify whetherpresentationscreen sharedfrom CiscoWebex roomdevice(SX10Quick Set) isavailable inCisco Webexfor Mac underJapaneseenvironmentafter On/Off ofvideo muteicon in CiscoWebex forMac

Checkpresentationscreen inWebex forMac underJapaneseenvironmentafter videomute on/off


PassedRoom device(DX70) (Pairedwith headset) ->Cisco WebexCloud -> Webexfor iOS Webexfor iOS -> Add ->Cisco WebexCloud -> Webexfor Android

Verify whetherCisco Webexroomdevice(DX70)in Japaneseenvironmentcan leave fromWebexmeeting withCisco Webexfor iOS userand CiscoWebex forAndroid user,bydisconnectingthe call fromheadset pairedto CiscoWebex roomdevice(DX70)via Bluetooth

Leave fromWebexmeeting viaheadsetpaired withroomdevice(DX70)in Japaneseenvironment




PassedRoom device(SX10Quick Set)-> Cisco WebexCloud -> Webexfor WindowsWebex forWindows -> Add-> Cisco WebexCloud -> Webexfor iOS (Screensharing)

Verify whetherScreen sharingfrom Webexfor Windowsin a Webexmeeting withCisco Webexroomdevice(SX10Quick Set) andCisco Webexfor iOS userworkssuccessfullyunder Japaneseenvironment

CheckScreensharing inJapaneseenvironmentduringWebexmeetingbetweenWebex forWindows,roomdevice(SX10Quick Set)and Webexfor iOS user


PassedRoom device(DX70) -> CiscoWebex Cloud ->Webex Room KitWebex for iOS ->Cisco WebexCloud -> WebexRoom Kit

Verify whethermissed callindication isavailable inCisco WebexRoom Kitunder Japaneseenvironmentwhen CiscoWebex for iOSuser callsCisco WebexRoom Kitwhich isalready invideo call withCisco Webexroomdevice(DX70)

Checkmissed callindicationin WebexRoom KitunderJapaneseenvironmentwhenWebex foriOS usercallsWebexRoom Kitwhich isalready invideo callwith roomdevice(DX70)


PassedWebex Room Kit-> Cisco WebexCloud -> Roomdevice(DX70)

Verify whetherCisco WebexRoom Kitreceives errormessage inJapanese whiletrying to makecall to Wi-Fidisabled CiscoWebex roomdevice(DX70)

Check errormessage inJapanesewhenWebexRoom Kitcalls Wi-Fidisabledroomdevice(DX70)




PassedNAVerify whethercontacts addedto favoritesfrom recentstab of CiscoWebex RoomKit Web UI isreflecting inCiscoTelePresenceTouch 10 ofCisco WebexRoom Kitunder Japaneseenvironment

Checkcontactsadded tofavoritesfromrecents tabvia web UIis reflectingin Touch 10of WebexRoom KitunderJapaneseenvironment


PassedNAVerify whetherbrandlogo(half wakestate) addedvia Web UI ofCisco WebexRoom Kitregistered toCisco WebexCloud isavailable evenafter a systemrestart

Check fortheavailabilityof brandlogo(halfwake state)in WebexRoom KitunderJapaneseenvironmentafter systemrestart


PassedNAVerify whetherJapanesecustom textadded via webUI is availablein the mainscreen ofCisco WebexRoom Kitwhen the roomdevice is inhalf wake stateafter a systemrestart

CheckJapanesecustom textfor WebexRoom Kitunder halfwake state




PassedWebex forWindows (pairedwith WebexRoom Kit Plus)-> Cisco WebexCloud ->Webexfor Android(pairedwith roomdevice(MX200G2))

Verify Screensharing fromWebex forWindowspaired to CiscoWebex RoomKit Plus duringa video callwith CiscoWebex roomdevice(MX200 G2)paired withWebex forAndroid, allregistered withCisco WebexCloud workssuccessfully

CheckScreensharingfromWebex forWindowspaired withWebexRoom KitPlus inJapaneseenvironmentduringvideo callwith roomdevice(MX200G2) pairedwith Webexfor Android


PassedRoom device(Paired withWebex forWindows)(Wirelesssharing) -> CiscoWebex Cloud ->Webex forAndroid

VerifyWirelesssharing inJapaneseenvironmentfrom CiscoWebex roomdevice(MX200G2) pairedwith Webexfor Windowsduring a videocall withWebex forAndroid, allregistered withCisco WebexCloud workssuccessfully

CheckWirelesssharing inJapaneseenvironmentfrom roomdevice(MX200G2) pairedwith WebexforWindowsduringvideo callwith Webexfor Android

UCJ12.5SPhI.RoomOS.G.060̀



PassedWebex for iOS(paired to WebexRoom Kit Plus)-> Cisco WebexCloud -> Roomdevice(DX80)

Verify whetherincoming callfrom Webexfor iOS pairedwith CiscoWebex RoomKit Plus underJapaneseenvironmentcan beanswered inheadset pairedto CiscoWebex roomdevice(DX80)via Bluetoothsuccessfully,all registeredto CiscoWebex Cloud

Answer theincomingcall fromWebex foriOS pairedwith WebexRoom KitPlus inheadsetpaired toroomdevice(DX80)in Japaneseenvironment


PassedWebex forWindows (pairedwith roomdevice(MX200G2)) -> CiscoWebex Cloud ->Roomdevice(DX80)

Verify whetherthe audio ofCisco Webexroomdevice(MX200G2) pairedwith Webexfor Windowscan be heardvia headsetpaired to CiscoWebex roomdevice(DX80)in Japaneseenvironmentvia Bluetoothduring videocall betweenCisco Webexroomdevice(MX200G2) and CiscoWebex roomdevice(DX80),all registeredto CiscoWebex Cloud

Checkaudio ofroomdevice(MX200G2) pairedwith WebexforWindows inheadsetpaired withroomdevice(DX80)in Japaneseenvironment




PassedRoom device(SX80 Codec) ->Cisco WebexCloud -> Webexfor iOS(pairedwith roomdevice(MX200G2))

Verify whethercall fromCisco Webexroomdevice(SX80Codec)answered inWebex for iOSpaired withCisco Webexroomdevice(MX200G2) inJapaneseenvironmentcan be endedin CiscoWebex roomdevice(MX200G2), allregistered toCisco WebexCloud

End the callof roomdevice(SX80Codec) inroomdevice(MX200G2) pairedwith Webexfor iOSunderJapaneseenvironment




PassedRoom device(DX80) -> CiscoWebex Cloud ->Webex forAndroid(pairedwith roomdevice(SX10Quick Set))

Verify whetherthe volume ofCisco Webexroomdevice(SX10Quick Set)paired withCisco Webexfor Androidcall can beincreased/decreasedin headsetpaired to CiscoWebex roomdevice(DX80)via Bluetoothand checkwhethervolume levelset by headsetis reflecting inCisco Webexroomdevice(DX80)under Japaneseenvironment,when bothregistered toCisco WebexCloud

Increase/Decreasethe volumeof roomdevice(SX10Quick Set)paired withWebex forAndroidcall viaheadsetpaired toroomdevice(DX80)underJapaneseenvironment




PassedRoom device(DX80) -> CiscoWebex Cloud ->Webex foriOS(paired withroomdevice(MX200G2))

Verify whethermute inheadset pairedto CiscoWebex roomdevice (DX80)via Bluetoothreflects in thefar end CiscoWebex roomdevice(MX200G2) pairedwith Webexfor iOS underJapaneseenvironmentduring videocall, allregistered toCisco WebexCloud

Mute fromheadsetpaired toroomdevice(DX80)underJapaneseenvironmentduringvideo callwith Webexfor iOSpaired withroomdevice(MX200G2)


PassedRoom device(DX80)(Presentationsharing) -> CiscoWebex Cloud ->Webex forAndroid(pairedwith WebexRoom Kit Plus)

VerifyPresentationsharing fromCisco Webexroomdevice(DX80)in Japaneseenvironmentduring a videocall withWebex forAndroid pairedwith CiscoWebex RoomKit Plus, allregistered withCisco WebexCloud workssuccessfully

CheckPresentationsharing inroomdevice(DX80)underJapaneseenvironmentduringvideo callwith Webexfor Androidpaired withWebexRoom KitPlus




PassedRoom device(DX80) -> CiscoWebex Cloud ->Webex forWindows Webexfor Windows ->Add ->CiscoWebex Cloud ->Webex for iOS

Verify whetherthe In-Callcontrol'Record' inJapaneseenvironmentexported viaweb UI isreflecting inCisco Webexroomdevice(DX80)during CiscoWebexmeeting withWebex forWindows andWebex foriOS, allregistered toCisco WebexCloud

Check'Record'control inJapaneseenvironmentexported viaweb UI isreflecting inroomdevice(DX80)duringWebexmeetingwith WebexforWindowsand Webexfor iOS


PassedNAVerify whetherBrand logoimage for halfwake stateuploaded viaweb UI isavailable inboth mainscreen andCiscoTelePresenceTouch 10 ofCisco WebexRoomKit Plusunder Japaneseenvironment

CheckBrand logoimage forhalf wakestate isavailable inWebexRoom KitPlus underJapaneseenvironment




PassedNAVerifyMicrophoneoff via web UIof the deviceunder Japaneseenvironment isreflected inremotelypaired CiscoTelepresenceTouch 10 ofCisco WebexRoom KitPlus,registered toCisco WebexCloud workssuccessfully

CheckMicrophoneoff via webUI of thedevice isreflected inremotelypairedTouch 10 ofWebexRoom KitPlus underJapaneseenvironment


PassedRoom device(DX80) -> CiscoWebex Cloud ->Webex Room KitPlus

Verify whetherStartPresentationvia web UI ofroomdevice(DX80)in Japaneseenvironmentduring videocall with CiscoWebex RoomKit Plus,registered toCisco WebexCloud workssuccessfully

Check StartPresentationvia web UIof roomdevice(DX80)in Japaneseenvironmentduringvideo callwith WebexRoom KitPlus


PassedNAVerify whetherJapaneselanguage canbe added to thelanguage listand to selectJapanese asworkinglanguage ofCisco WebexBoard app inPixel Csuccessfully

CheckJapaneselanguagesupport inWebexBoard appin Pixel C




PassedNAVerify whetherlocalwhiteboardcreated inCisco WebexBoard app inPixel C can besaved to thespace ofWebex forAndroid underJapaneseenvironmentopened inCisco WebexBoard app inPixel Csuccessfully

Save localwhiteboardfromWebexBoard appin Pixel Cto the spaceof Webexfor AndroidunderJapaneseenvironment


PassedNAVerify whetherCisco WebexBoard app inPixel C datacan be clearedusing homebutton fromthe dashboardof CiscoWebex Boardapp in Pixel Cby pressingand holdingthe homebutton for 5secondssuccessfully

ClearWebexBoard appin Pixel Cdata withthe help ofhomebutton




PassedWebex Board appin Pixel C ->Cisco WebexCloud -> Webexfor iOS

Verify whetheruser is able toview profilepicture ofCisco Webexfor iOS user inCisco WebexBoard app inPixel C underJapaneseenvironmentwhen CiscoWebex for iOSuser stopssending theirvideo duringvideo call

Check theprofilepicture ofuser loggedinto Webexfor iOS inWebexBoard appin Pixel CunderJapaneseenvironmentafter theuser stopssendingvideo


PassedWebex Board appin Pixel C ->Cisco WebexCloud -> Roomdevice (DX70)(Presentationsharing)

Verify whetherpresentationshared fromCisco Webexroomdevice(DX70)during videocall isavailable inCisco WebexBoard app inPixel C underJapaneseenvironment

Checkpresentationscreen inWebexBoard appin Pixel CunderJapaneseenvironmentwhenpresentationis sharedfrom roomdevice(DX70)duringvideo call


PassedWebex Board appin Pixel C ->Cisco WebexCloud->WebexRoom Kit WebexBoard app inPixel C -> Add ->Cisco WebexCloud -> Webexfor iOS

Verify whethersecond call toCisco Webexfor iOS can bemade fromCisco WebexBoard app inPixel C underJapaneseenvironmentwhich is invideo call withCisco WebexRoom Kitregistered toCisco WebexCloud

Add secondcall fromWebexBoard appin Pixel CunderJapaneseenvironmentwhich is invideo callwith WebexRoom Kit




PassedWebex Board appin Pixel C(Whiteboarding) ->Cisco WebexCloud->Webexfor Android

Verify whetherwhiteboardsharing fromCisco WebexBoard app inPixel C duringvideo call withCisco Webexfor Androiduser inJapaneseenvironmentworkssuccessfully

CheckwhiteboardsharingfromWebexBoard appin Pixel Cduringvideo callwith Webexfor Androiduser inJapaneseenvironment


PassedWebex Board appin Pixel C (viaWebex for iOSspace) -> CiscoWebex Cloud ->Roomdevice(SX20Quick Set)

Verify whetherspace of CiscoWebex for iOScan be openedin CiscoWebex Boardapp in Pixel Cunder Japaneseenvironmentwhen CiscoWebex for iOSis paired withCisco WebexBoard app inPixel C andmake videocall to CiscoWebex roomdevice(SX20Quick Set) viathe spacesuccessfully

Make videocall viaspace ofWebex foriOS openedin WebexBoard appin Pixel CunderJapaneseenvironment




PassedWebex Board appin Pixel C ->Cisco WebexCloud-> Roomdevice(MX200G2) Webex forAndroid -> CiscoWebex Cloud ->Webex Board appin Pixel C

Verify whethersecond callfrom CiscoWebex forAndroid canbe answered inCisco WebexBoard app inPixel C underJapaneseenvironmentwhich is invideo call withCisco Webexroomdevice(MX200G2)

Answersecond callfromWebex forAndroiduser inWebexBoard appin Pixel CunderJapaneseenvironment


PassedWebex Board appin Pixel C ->Cisco WebexCloud -> WebexRoom Kit

Verify whether'Pin toselfview'option isavailable incall screen ofCisco WebexBoard app inPixel C underJapaneseenvironmentduring videocall with CiscoWebex RoomKit

Check 'Pinto selfview'option inWebexBoard appin Pixel CunderJapaneseenvironmentduringvideo callwith WebexRoom Kit


PassedNAVerify whetherbrand logo forhalf wake stateadded via WebUI of CiscoWebex roomdevice (DX80)is previewed inweb UIregistered toCisco WebexCloud

Checkbrand logoimage forhalf wakestate ispreviewedin web UIof roomdevice(DX80)

UCJ12.5SPhII.RoomOS.G.004



PassedNAVerify whetherbrandlogo(half wakestate) addedvia Web UI ofCisco WebexRoomKit Plusin Japaneseenvironment isnot availableafter a systemreset

Check forthe brandlogo(halfwake state)added viaweb UI inWebexRoom KitPlus underJapaneseenvironmentafter systemreset


PassedNAVerify whethercustom brandbackgroundimage for halfwake stateadded via WebUI of CiscoWebex RoomKit Plus ispreviewed inweb UIregistered toCisco WebexCloud

Checkcustombrandbackgroundimage forhalf wakestate ispreviewedin web UIof WebexRoom KitPlus


PassedNAVerify whethercustom brandbackground forhalf wake stateadded via WebUI of CiscoWebex RoomKit Plus inJapaneseenvironment isnot availableafter a systemreset

Check forthe custombrandbackground(half wakestate) inWebexRoom KitPlus underJapaneseenvironmentafter systemreset




PassedNAVerify whethercustom brandbackgroundimage (halfwake state)added via webUI is availablein CiscoWebex RoomKit Plus inJapaneseenvironment

Check fortheavailabilityof custombrandbackgroundimage (halfwake state)in WebexRoom KitPlus underJapaneseenvironment


PassedNAVerify whetherJapanesecustom text(awake state)added via WebUI of CiscoWebex RoomKit Plus ispreviewed inweb UI,register toCisco WebexCloud evenafter systemrestart

CheckJapanesecustom textfor awakestate ispreviewedin web UIof WebexRoom KitPlus evenafter systemrestart


PassedNAVerify whetherJapanesecustom halfwake messageenabled viaxAPIcommand fromweb UI isavailable in themain screen ofCisco Webexroom device(SX10 QuickSet) after asystem restart

CheckJapanesecustommessage isavailable inroomdevice(SX10Quick Set)under halfwake state




PassedNAVerify whethervolume isincreasedwhile ringtoneis selected inCiscoTelepresenceTouch 10 ofCisco WebexRoomKit Plusregistered toCisco WebexCloud underJapaneseenvironment

Checkringtonevolume isincreased inloop whileringtone isselected inWebexRoom KitPlus underJapaneseenvironment


PassedNAVerify whetherRingtonevolumeindicator isdisplayed inJapaneseenvironmentwhile volumeis decreasedunder'Ringtone andvolume' tab inCisco Webexroom device(DX80)registered toCisco WebexCloud

CheckRingtonevolumeindicator inJapaneseenvironmentwhilevolume isdecreasedunder'Ringtoneand volume'tab in roomdevice(DX80)




PassedNAVerify whetherSystemvolumeindicator isdisplayedwhile volumeis increased inCisco WebexRoom KitPlus,registered toCisco WebexCloud whensystem is notunder'Ringtone andvolume' tab inJapaneseenvironment

CheckSystemvolumeindicatorwhilevolume isincreased inWebexRoom KitPlus inJapaneseenvironment


PassedWebex Room Kit(Presentationsharing) -> CiscoWebex Cloud ->Webex Room KitPlus

Verify whetherPresentationsharing underJapaneseenvironmentduring videocall betweenCisco WebexRoom Kit andPrecision 60cameraconnectedCisco WebexRoomKit Plusworkssuccessfully

PresentationsharingunderJapaneseenvironmentduringvideo callbetweenWebexRoom Kitand WebexRoom KitPlus withPrecision 60camera




PassedWebex Room Kit(Paired withWebex forMac)(Wirelesssharing) -> CiscoWebex Cloud ->Webex Room KitPlus

Verify whetherWirelesssharing underJapaneseenvironmentduring videocall betweenCisco WebexRoom Kit andPrecision 60cameraconnectedCisco WebexRoomKit Plusworkssuccessfully

WirelesssharingunderJapaneseenvironmentfromWebexRoomKit toWebexRoom KitPlus withPrecision 60Camera


PassedWebex Room KitPlus -> CiscoWebex Cloud ->Room device(DX80)

Verify whetherthe quality ofvideo underJapaneseenvironment isgood duringvideo callbetween CiscoWebex roomdevice (DX80)and CiscoWebex RoomKit PlusconnectedwithPrecision 60Camera

Checkquality ofvideo underJapaneseenvironmentduringvideo callbetweenroomdevice(DX80) andWebexRoom KitPlus withPrecision 60camera




PassedWebex Room KitPlus -> CiscoWebex Cloud ->Webex Room Kit

Verify whetherLayout Equalwith twonumber ofsources isavailable inCisco WebexRoomKit Plusafter xAPIcommandexecution fromweb UI duringvideo call withCisco WebexRoom Kitregistered toCisco WebexCloud inJapaneseenvironment

CheckLayoutEqual withtwo numberof sourcesin Japaneseenvironmentafter xAPIcommandexecutionfrom webUI ofWebexRoom KitPlus


PassedRoom device(SX20Quick Set)-> Cisco WebexCloud -> Roomdevice (SX80Codec)

Verify whetherLayout Equalwith fournumber ofsources isavailable inCisco Webexroom device(SX20 QuickSet) after xAPIcommandexecution fromweb UI duringvideo call withCisco Webexroom device(SX80 Codec)registered toCisco WebexCloud inJapaneseenvironment

CheckLayoutEqual withfour numberof sourcesin Japaneseenvironmentafter xAPIcommandexecutionfrom webUI of roomdevice(SX20Quick Set)duringvideo call




PassedNAVerify whetherJapanese notescan be madeon presentationduring Localsharing inCisco WebexBoard 55under Japaneseenvironment

Japanesenotes onpresentationduringLocalsharing inWebexBoard 55


PassedWebex Board 55-> Cisco WebexCloud -> Webexfor iOS

Verify whetherJapanese notesmade onPresentationduringPresentationsharing fromCisco WebexBoard 55 canbe viewed inCisco Webexfor iOSsuccessfully

Japanesenotes onpresentationduringPresentationsharingfromWebexBoard 55 toWebex foriOS


PassedWebex Board 55-> Cisco WebexCloud -> Webexfor AndroidWebex forAndroid -> Add-> Cisco WebexCloud -> Webexfor Mac

Verify whetherJapanese notesmade onpresentationduringPresentationsharing fromCisco WebexBoard 55 in aCisco Webexmeeting can beviewed inCisco Webexfor Androidand CiscoWebex forMacsuccessfully

Japanesenotes onpresentationduringPresentationsharingfromWebexBoard 55 inWebexmeeting




PassedNAVerify whetheruser is able toencounter errormessage inJapaneselocale whenCisco WebexBoard 55 isconnected toinsecureWi-Finetwork

Errormessage inJapaneselocale whenWebexBoard 55 isconnectedto insecureWi-Finetwork


PassedWebex Board 55-> Cisco WebexCloud -> WebexRoom Kit Plus

Verify whetherPresentationsharing in avideo callbetween CiscoWebex Board55 connectedto Wi-Fi andCisco WebexRoomKit Plusworkssuccessfullyunder Japaneseenvironment

Presentationsharing in avideo callbetweenWebexBoard 55connectedto Wi-Fiand WebexRoom kitPlus underJapaneseenvironment


PassedWebex Board 55-> Cisco WebexCloud -> WebexRoom Kit Plus

Verify whetherWirelesssharing in avideo callbetween CiscoWebex Board55 connectedto Wi-Fi andCisco WebexRoomKit Plusworkssuccessfullyunder Japaneseenvironment

WirelesssharingbetweenWebexRoom KitPlus andWebexBoard 55connectedto Wi-Fi




PassedNAVerify whetheruser is able toview errormessage inJapaneselocale whenwrongusername/passwordis entered in'Proxy settings'for CiscoWebex Board55 registeredto CiscoWebex Cloud

Errormessage inJapaneselocale forwrongusername/passwordunder Proxysettings tabin WebexBoard 55


PassedWebex Board 55-> Cisco WebexCloud -> Roomdevice (SX10Quick Set)(Content sharing)

Verify whetheraudio icon isavailable toincrease/decreasevolume duringContentsharing viaHDMI cablefrom CiscoWebex Board55 underJapaneseenvironment toCisco Webexroom device(SX10 QuickSet)

Audio iconduringContentsharing inWebexBoard 55underJapaneseenvironment


PassedWebex Board 55-> Cisco WebexCloud -> Webexfor Android/iOS(Content sharing)

Verify whetheraudio icon isavailable toincrease/decreasevolume duringContentsharing viaHDMI cablefrom CiscoWebex Board55 underJapaneseenvironment toCisco WebexforiOS/Androidusers

Audio iconduringContentsharing inWebexBoard 55underJapaneseenvironmentduringvideo callwith WebexforiOS/Android




PassedWebex Board 55-> Cisco WebexCloud -> WebexforWindows/Mac(Content sharing)

Verify whetheraudio icon isavailable toincrease/decreasevolume duringContentsharing viaHDMI cablefrom CiscoWebex Board55 underJapaneseenvironment toCisco WebexforWindows/Macusers

Audio iconduringContentsharing inWebexBoard 55underJapaneseenvironmentduringvideo callwith WebexforWindows/Mac


PassedWebex Board 55-> Cisco WebexCloud -> WebexRoom Kit(Content sharing)

Verify whethervolume can beincreased/decreasedusing audioicon duringContentsharing viaHDMI cablefrom CiscoWebex Board55 underJapaneseenvironment toCisco WebexRoom Kitsuccessfully

Increase/decreasevolumeusing audioicon fromWebexBoard 55underJapaneseenvironmentduringvideo callwith WebexRoom Kit


PassedNAVerify whetherStatic IPconfigurationsin CiscoWebex Board55 underJapaneseenvironmentremainunchangedafter systemrestart

Static IPconfigurationsin WebexBoard 55underJapaneseenvironmentafter systemrestart




PassedNAVerify whetheruser is able tochange the IPaddress ofCisco WebexBoard 55under Japaneseenvironment

Change IPaddress ofWebexBoard 55 inJapaneselocale


PassedNAVerify whetheruser receiveserror messagein Japaneselocale whenwrong IPdetails areentered andsaved in CiscoWebex Board55 registeredto CiscoWebex Cloud

Errormessage inJapaneselocale forincorrect IPdetails inWebexBoard 55


PassedWebex Room KitPlus -> CiscoWebex Cloud ->Webex Board 55

Verify whetherName Tag ofCisco WebexRoomKit Plusis displayingduring videocall in CiscoWebex Board55 underJapaneseenvironmentsuccessfully

Name Tagof WebexRoom KitPlus inWebexBoard 55underJapaneseenvironment




PassedWebex Board 55-> Cisco WebexCloud -> Roomdevice (SX20Quick Set)Webex Board 55-> Add -> CiscoWebex Cloud ->Webex for iOS

Verify whetherName Tag ofCisco Webexroom device(SX20 Quickset) and CiscoWebex for iOSuser isdisplayingduring CiscoWebexmeeting inCisco WebexBoard 55under Japaneseenvironmentsuccessfully

Name Tagfor allparticipantsin WebexBoard 55duringWebexmeeting


PassedWebex Board 55-> Cisco WebexCloud -> Webexfor iOS(Pairedwith WebexRoom KitPlus)(Presentationsharing)

Verify whetherPresentationsharing fromCisco WebexRoomKit Pluspaired withCisco Webexfor iOS toCisco WebexBoard 55workssuccessfully inJapaneseenvironment,all registeredwith CiscoWebex Cloud

PresentationsharingfromWebexRoom KitPlus pairedwith Webexfor iOS toWebexBoard 55underJapaneseenvironment




PassedWebex Room KitPlus -> CiscoWebex Cloud ->Webex forWindows Webexfor Windows(Screensharing)-> Add-> Cisco WebexCloud -> Webexfor Android

Verify whetherscreen sharedfrom CiscoWebex forWindows isavailable inCisco WebexRoomKit Plusunder Japaneseenvironmentduring CiscoWebexmeetingamong CiscoWebex forWindows,Cisco WebexRoomKit Plusand CiscoWebex forAndroid user

Checkscreenshared fromWebex forWindows inWebexRoom KitPlus underJapaneseenvironmentduringWebexmeeting


PassedWebex Room KitPlus -> CiscoWebex Cloud ->Webex for iOSWebex for iOS ->Add -> CiscoWebex Cloud ->Webex forAndroid

Verify whetherPeople Countin Japaneseenvironmentduring CiscoWebexmeetingbetween CiscoWebex RoomKit Plus, CiscoWebex for iOSuser and CiscoWebex forAndroid userworkssuccessfully

CheckPeopleCount inJapaneseenvironmentduringWebexmeetingbetweenWebexRoom KitPlus,Webex foriOS userand Webexfor Androiduser




PassedWebex for iOS ->Cisco WebexCloud -> WebexforAndroid(pairedwith WebexRoom Kit Plus)Webex for iOS ->Add ->CiscoWebex Cloud ->Webex for Mac

Verify whetherWebexmeetingbetween CiscoWebex foriOS, CiscoWebex forMac and CiscoWebex RoomKit Plus pairedwith CiscoWebex forAndroidworkssuccessfullyunder Japaneseenvironment

CheckWebexmeetingbetweenWebex foriOS, Webexfor Mac andWebexRoom KitPlus pairedwith Webexfor AndroidunderJapaneseenvironment


PassedWebex Room KitPlus(paired withWebex forWindows)(Wirelesssharing) -> CiscoWebex Cloud ->Webex Board 55

Verify whetherWirelesssharing fromCisco WebexRoomKit Pluspaired withCisco Webexfor Windowsduring videocall with CiscoWebex Board55 registeredto CiscoWebex Cloudworkssuccessfullyunder Japaneseenvironment

WirelesssharingfromWebexRoom KitPlus duringvideo callwith WebexBoard 55underJapaneseenvironment




PassedWebex Room KitPlus -> CiscoWebex Cloud ->roomdevice(SX80Codec)(Pairedwith Webex forWindows(Screensharing))

Verify whethermissed callindication ofCisco WebexRoomKit Plusis available inCisco Webexroomdevice(SX80Codec) underJapaneseenvironmentafter stoppingthe screensharing fromCisco Webexfor Windowsuser to CiscoWebex roomdevice(SX80Codec), allregistered toCisco WebexCloud

Missed callindicationin roomdevice(SX80Codec)underJapaneseenvironmentafterstoppingscreensharing


PassedRoomdevice(SX10Quick Set) ->Cisco WebexCloud -> WebexforAndroid(pairedwith WebexRoom Kit Plus)

Verify whethermuteindication isavailable underparticipants listof CiscoWebex RoomKit Plus pairedwith CiscoWebex forAndroid whenCisco Webexroomdevice(SX10Quick Set) ismuted underJapaneseenvironment

Check muteindicationunderJapaneseenvironmentin WebexRoom KitPlus whenthe call ofroomdevice(SX10Quick Set)istransferredfromWebex forAndroid toWebexRoom KitPlus




PassedRoomdevice(SX10Quick Set) ->Cisco WebexCloud -> WebexforAndroid(pairedwith roomdevice(DX80))

Verify whetherScreen sharingfrom CiscoWebex forAndroid pairedto CiscoWebex roomdevice(DX80)during a videocall with CiscoWebex roomdevice(SX10Quick Set), allregistered withCisco WebexCloud workssuccessfully

ScreensharingfromWebex forAndroidpaired withroomdevice(DX80)in Japaneseenvironmentduringvideo callwith roomdevice(SX10Quick Set)


PassedWebex Room KitPlus(Presentationsharing) -> CiscoWebex Cloud ->Webex forAndroid(Pairedwith roomdevice(SX10Quick Set))

Verify whetherpresentationscreen sharedfrom CiscoWebex RoomKit Plus isavailable inCisco Webexfor Androidpaired withCisco Webexroomdevice(SX10Quick Set)under Japaneseenvironmentafter On/Off ofvideo muteicon in CiscoWebex forAndroid

Checkpresentationscreen inWebex forAndroidpaired withroomdevice(SX10Quick Set)underJapaneseenvironmentafter videomute on/off




PassedWebex Room KitPlus -> CiscoWebex Cloud ->Webex forAndroid Webexfor Android ->Add -> CiscoWebex Cloud ->Webex for iOS

Verify whetherpresentationstarted via webUI of CiscoWebex RoomKit Plus inJapaneseenvironment isreflectingduring CiscoWebexmeetingamong CiscoWebex foriOS, CiscoWebex RoomKit Plus andCisco Webexfor Android,all registeredto CiscoWebex Cloud

Startpresentationvia web UIof WebexRoom KitPlus inJapaneseenvironmentduringWebexmeeting


PassedRoomdevice(SX10Quick Set) ->Cisco WebexCloud -> Webexfor AndroidWebex Board 55-> Cisco WebexCloud -> Roomdevice(SX10Quick Set)

Verify whethermissed callindication isavailable inCisco Webexroomdevice(SX10Quick Set)under Japaneseenvironmentwhen CiscoWebex Board55 calls CiscoWebex roomdevice(SX10Quick Set)which isalready invideo call withCisco Webexfor Android

Missed callindicationin roomdevice(SX10Quick Set)underJapaneseenvironmentfor WebexBoard 55call




PassedNAVerify whethercontacts addedto favoritesfrom recentstab of CiscoWebex RoomKit Plus WebUI is reflectingin CiscoTelePresenceTouch 10 ofCisco WebexRoomKit Plusunder Japaneseenvironment

Checkcontactsadded tofavoritesfromrecents tabvia web UIis reflectingin Touch 10of WebexRoom KitPlus underJapaneseenvironment


PassedWebex Room KitPlus(Presentationsharing) -> CiscoWebex Cloud ->Webex forAndroid(pairedwith roomdevice(SX10Quick Set)

Verify whetherMinimize/Maximizepresentationscreen in CiscoWebex roomdevice(SX10Quick Set)paired withCisco Webexfor AndroidduringPresentationsharing fromCisco WebexRoomKit Plusworkssuccessfully inJapaneseenvironment,all registeredwith CiscoWebex Cloud

Minimize/Maximizethepresentationscreen inroomdevice(SX10Quick Set)duringPresentationsharingunderJapaneseenvironment




PassedRoomdevice(SX10Quick Set)(Wirelesssharing)->WebexCloud -> Webexfor Android(pairedwith roomdevice(DX80))

Verify whetherWirelesssharing inJapaneseenvironmentfrom CiscoWebex roomdevice(SX10Quick Set)paired withCisco WebexforMac duringvideo call withCisco Webexfor Androidpaired withCisco Webexroomdevice(DX80)registered toCisco WebexCloud workssuccessfully

Wirelesssharingfrom roomdevice(SX10Quick Set)duringvideo callwith Webexfor Androidpaired withroomdevice(DX80)underJapaneseenvironment


PassedWebex Board 55-> Cisco WebexCloud -> WebexforAndroid(pairedwith WebexRoom Kit Plus)

Verify whethercall fromCisco WebexBoard 55answered inCisco Webexfor Androidpaired withCisco WebexRoomKit Plusin Japaneseenvironmentcan be endedin CiscoWebex RoomKit Plus, allregistered toCisco WebexCloud

End the callof WebexBoard 55 inWebexRoom KitPlus pairedwith Webexfor AndroidunderJapaneseenvironment




PassedWebex Room KitPlus -> CiscoWebex Cloud ->Webex Board 55

Verify whetherthe In-Callcontrol'Language' inJapaneseenvironmentexported viaweb UI isreflecting inCisco WebexRoomKit Plusduring videocall with CiscoWebex Board55, allregistered toCisco WebexCloud

In-Callcontrol'Language'in WebexRoom KitPlus underJapaneseenvironment


PassedWebex forWindows,Webexfor iOS, Webexfor Android ->Cisco WebexCloud ->Scheduledmeeting WebexRoomKit Plus ->Cisco WebexCloud ->Scheduledmeeting

Verify whetherCisco WebexRoomKit Pluswith Japaneselocale can jointhe Scheduledmeetinginitiated fromCisco Webexfor Windowswith CiscoWebex for iOSand CiscoWebex forAndroid user,by dialing thevideo addressfrom CiscoWebex RoomKit Plussuccessfully

JoinScheduledmeetingfromWebexRoom KitPlus inJapaneselocale




PassedWebex for Mac,Webex for iOS,Webex forAndroid -> CiscoWebex Cloud ->Scheduledmeeting WebexRoom Kit Plus(Presentationsharing) -> CiscoWebex Cloud ->Scheduledmeeting

Verify whetherPresentationsharing fromCisco WebexRoomKit Plusin a Scheduledmeetinginitiated fromCisco Webexfor Mac withCisco Webexfor iOS andCisco Webexfor Androidusers workssuccessfullyunder Japaneseenvironment,after dialingthe Scheduledmeeting videoaddress fromCisco WebexRoomKit Plus

PresentationsharingfromWebexRoom KitPlus in aScheduledmeetingunderJapaneseenvironment




PassedWebex forWindows,Webexfor iOS, Webexfor Android ->Cisco WebexCloud ->Scheduledmeeting Roomdevice (SX10Quick Set)(Pairedwith Webex forMac) (Wirelesssharing) -> CiscoWebex Cloud ->Scheduledmeeting

Verify whetherWirelessSharing fromCisco Webexroom device(SX10 QuickSet) pairedwith CiscoWebex forMac in aScheduledmeetinginitiated fromCisco Webexfor Windowswith CiscoWebex for iOSand CiscoWebex forAndroid usersworkssuccessfullyunder Japaneseenvironment,after dialingthe Scheduledmeeting videoaddress fromCisco Webexroom device(SX10 QuickSet)

Wirelesssharingfrom roomdevice(SX10Quick Set)in aScheduledmeetingunderJapaneseenvironment




PassedWebex for Mac,Webex forWindows,Webexfor iOS (Screensharing) -> CiscoWebex CloudWebex Room KitPlus-> CiscoWebex Cloud ->Scheduledmeeting

Verify whetherscreen sharedfrom CiscoWebex for iOSunder Japaneseenvironment ina Scheduledmeetinginitiated fromCisco Webexfor Mac withCisco Webexfor Windowsand CiscoWebex for iOSis available inCisco WebexRoom KitPlus, afterdialing themeeting videoaddress fromCisco WebexRoomKit Plus

Checkscreenshared fromWebex foriOS underJapaneseenvironmentin WebexRoom KitPlus duringScheduledmeeting




PassedWebex forWindows(Screensharing), Webexfor Android,Webex for iOS ->Cisco WebexCloud ->Scheduledmeeting Roomdevice (SX10Quick Set) ->Cisco WebexCloud ->Scheduledmeeting

Verify whetherscreen sharedfrom CiscoWebex forWindowsunder Japaneseenvironment ina Scheduledmeetinginitiated fromCisco Webexfor Windowswith CiscoWebex forAndroid andCisco Webexfor iOS isavailable inCisco Webexroom device(SX10 QuickSet), afterdialing themeeting videoaddress fromCisco Webexroom device(SX10 QuickSet)

Checkscreenshared fromWebex forWindows inroomdevice(SX10Quick set)duringScheduledmeetingunderJapaneseenvironment




PassedWebex forWindows,Webexfor iOS, Webexfor Mac -> CiscoWebex Cloud ->Scheduledmeeting WebexRoomKit Plus ->Cisco WebexCloud ->Scheduledmeeting

Verify whetherDo NotDisturbenabled CiscoWebex RoomKit Plus canjoin Scheduledmeeting underJapaneseenvironmentafter meetingis initiatedfrom CiscoWebex forWindows withCisco Webexfor iOS andCisco Webexfor Mac users,by dialingmeeting videoaddress fromCisco WebexRoomKit Plus

JoinScheduledmeetingunderJapaneseenvironmentfrom DNDenabledWebexRoom KitPlus




PassedWebex for Mac,Webex forAndroid, Webexfor iOS -> CiscoWebex Cloud ->Scheduledmeeting Roomdevice (DX80) ->Cisco WebexCloud ->Scheduledmeeting

Verify whetherCisco Webexfor iOS can bemarked asfavorite fromthe participantlist of CiscoWebex roomdevice (DX80)under JapaneseenvironmentduringScheduledmeetinginitiated fromWebex forMac withWebex for iOSand Webex forAndroid, afterjoiningScheduledmeeting fromCisco Webexroom device(DX80) bydialing themeeting videoaddresssuccessfully

MarkWebex foriOS asfavoritefromparticipantlist of roomdevice(DX80)underJapaneseenvironmentduringScheduledmeeting


PassedWebex forWindows,Webexfor Mac -> CiscoWebex Cloud ->Scheduledmeeting Roomdevice (SX20Quick Set) ->Cisco WebexCloud ->Scheduledmeeting

Verify whetheruser is able toview thenotification inCisco Webexroom device(SX20 QuickSet) whenCisco Webexfor Mac leavesthe Scheduledmeetinginitiated fromCisco Webexfor Windows

Notificationin roomdevice(SX20Quick Set)whenWebex forMac leavesfromScheduledmeeting




PassedWebex Board 55(PresentationSharing) -> CiscoWebex Cloud ->Webex forAndroid Webexfor Android ->Add -> CiscoWebex Cloud ->Webex for Mac

Verify whetherPresentationSharing fromCisco WebexBoard 55under Japaneselocale workssuccessfullyduring CiscoWebexmeeting withCisco Webexfor Androidand CiscoWebex forMac users

PresentationsharingfromWebexBoard 55underJapaneseenvironmentduringWebexMeeting


PassedWebex for iOS,Webex forWindows ->Cisco WebexCloud ->Scheduledmeeting WebexBoard 55 ->Cisco WebexCloud ->Scheduledmeeting

Verify whetherCisco WebexBoard 55 canjoin Scheduledmeetingbetween CiscoWebex for iOSand CiscoWebex forWindows userby dialing themeeting videoaddresssuccessfully

JoinScheduledmeetingfromWebexBoard 55underJapaneseenvironment


PassedWebex Board 55(White boardsharing) -> CiscoWebex Cloud ->Webex for Mac

Verify whetherWhite boardsharing fromCisco WebexBoard 55during videocall with CiscoWebex forMac userunder Japaneseenvironmentworkssuccessfully

WhiteboardingbetweenWebexBoard 55and Webexfor Macuser underJapaneseenvironment




PassedWebex Board 55(White boardsharing) -> CiscoWebex Cloud ->Webex for iOSWebex for iOS ->Add -> CiscoWebex Cloud ->Webex forWindows

Verify whetherWhite boardsharing fromCisco WebexBoard 55 in aCisco Webexmeeting underJapaneseenvironmentwith CiscoWebex for iOSand CiscoWebex forWindows usersworkssuccessfully

White boardsharingfromWebexBoard 55 inWebexmeetingunderJapaneseenvironment


PassedNAVerify whetherCisco Webexicon isremoved inCisco WebexRoomDevice(SX80Codec) duringdeviceactivationunder Japaneseenvironment

CheckCiscoWebex iconin Japaneseenvironmentduringdeviceactivationof WebexRoomDevice(SX80Codec)

UCJ12.5PH3S.RoomOS.G.001

PassedNAVerify whetherCisco Webexicon ischanged toCisco WebexTeams icon forhalf wake statein theOn-ScreenDisplay ofCisco WebexRoomDevice(MX200G2) underJapaneseenvironment

CheckWebex iconis changedto WebexTeams iconfor halfwake statein WebexRoomDevice(MX200G2) inJapaneseenvironment




PassedNAVerify whetherstring ‘Webex’is changed to‘WebexTeams’ inCisco WebexDX80 for halfwake state inJapaneseenvironment

Checkstring‘Webex’ ischanged to‘WebexTeams’ inWebexDX80 forhalf wakestate underJapaneseenvironment


PassedNAVerify whethersoftware nameis changedfrom ‘WebexRoom OS’ to‘Room OS’ inCisco WebexRoomKit Plusregistered toCisco WebexCloud underJapaneseenvironment

Checksoftwarename ischangedfrom‘WebexRoom OS’to ‘RoomOS’ inWebexRoom KitPlus underJapaneseenvironment


PassedWebexDX80->CiscoWebexcloud->WebexRoom Kit Plus

Verify whetherflash isavailable inCiscoTelepresenceTouch 10 andOn-ScreenDisplay ofCisco WebexRoomKit Plusin Japaneseenvironmentduringincoming callof CiscoWebex DX80,all registeredto CiscoWebex Cloud

Check flashis availablein Touch 10and OSD ofWebexRoom KitPlus inJapaneseenvironmentduringincomingcall




PassedWebex Room KitPlus->CiscoWebexCloud->WebexBoard 55WebexBoard55->Add->CiscoWebexCloud->WebexDX80

Verify whetherflash isavailable inCisco WebexDX80 duringCisco Webexmeetinginvitation fromCisco WebexBoard 55, allregistered toCisco WebexCloud underJapaneseenvironment

Check flashis availablein WebexDX80underJapaneseenvironmentduringWebexmeetinginvitationfromWebexBoard 55


PassedWebex RoomDevice(SX80Codec)-> CiscoWebex Cloud ->Webex DX80

Verify whethermultiple panelsexported viaweb UI isreflecting inCiscoTelePresenceTouch 10 ofCisco WebexRoomDevice(SX80Codec) duringcall with CiscoWebex DX80in Japaneseenvironment,all registeredto CiscoWebex Cloud

Checkmultiplepanels areavailable inTouch 10 ofWebexRoomDevice(SX80Codec)during callunderJapaneseenvironment




PassedWebex Room KitPlus->CiscoWebexCloud->WebexTeams for iOSWebex Teams foriOS->Add->CiscoWebexCloud->WebexTeams forAndroid

Verify whethermultiple panelsexported viaweb UI isreflecting inCiscoTelePresenceTouch 10 ofCisco WebexRoomKit Plusin Japaneseenvironmentduring CiscoWebexmeetingamong CiscoWebex RoomKit Plus, CiscoWebex Teamsfor iOS andCisco WebexTeams forAndroid, allregistered toCisco WebexCloud

Checkmultiplepanels areavailable inTouch 10 ofWebexRoom KitPlus underJapaneseenvironmentduringWebexmeeting




PassedWebex Teams forWindows,WebexTeams for iOS,Webex Teams forAndroid -> CiscoWebex Cloud ->Scheduledmeeting WebexRoomDevice(SX80Codec) -> CiscoWebex Cloud ->Scheduledmeeting

Verify whethermultiple panelsare available inCisco WebexRoomDevice(SX80Codec) in aScheduledmeetinginitiated fromCisco WebexTeams forWindows withCisco WebexTeams for iOSand CiscoWebex Teamsfor Androidusers underJapaneseenvironment,after dialingthe Scheduledmeeting videoaddress fromCisco WebexRoomDevice(SX80Codec)

Checkmultiplepanels areavailable inWebexRoomDevice(SX80Codec)underJapaneseenvironmentin aScheduledmeeting


PassedWebex RoomDevice(SX10Quick Set) ->Cisco WebexCloud -> WebexRoomDevice(SX80Codec)

Verify whethercall log isavailable inweb UI ofCisco WebexRoomDevice(SX10Quick Set)after endingcall of CiscoWebex RoomDevice(SX80Codec) inJapaneseenvironment,all registeredto CiscoWebex Cloud

Check calllog in webUI ofWebexRoomDevice(SX10Quick Set)after endingcall inJapaneseenvironment




PassedWebex Room Kit-> Cisco WebexCloud -> WebexTeams foriOS(Paired withWebex DX80)

Verify whethercall log isavailable inweb UI ofCisco WebexDX80 pairedwith CiscoWebex Teamsfor iOS afterending call ofCisco WebexRoom Kit inJapaneseenvironment,all registeredto CiscoWebex Cloud

Check calllog in webUI ofWebexDX80paired withWebexTeams foriOS afterending callin Japaneseenvironment


PassedNAVerify whetherWhiteboardoption isavailable inCisco WebexDX80registered toCisco WebexCloud underJapaneseenvironment

CheckWhiteboardoption inWebexDX80underJapaneseenvironment




PassedWebex Teams forMac, WebexTeams forAndroid(pairedwith WebexDX80)(Whiteboardsharing), WebexTeams for iOS ->Cisco WebexCloud ->Scheduledmeeting

Verify whetherWhiteboardsharing fromCisco WebexDX80 pairedwith WebexTeams forAndroid in aScheduledmeetinginitiated fromCisco WebexTeams forMacwith CiscoWebex Teamsfor iOS andCisco WebexTeams forAndroid usersworkssuccessfullyunder Japaneseenvironment

WhiteboardsharingfromWebexDX80 in aScheduledmeetingunderJapaneseenvironment


PassedWebex RoomDevice(SX20Quick Set) ->Cisco WebexCloud -> WebexTeams forAndroid(Pairedwith WebexRoom Kit Plus)Webex Teams forAndroid -> Add-> Cisco WebexCloud -> WebexTeams for iOS

Verify whetherdrop option isavailable inparticipant listof CiscoWebex RoomDevice(SX20Quick Set)during CiscoWebexmeetingamong WebexRoomKit Pluspaired withWebex Teamsfor Androidand WebexTeams for iOS,all registeredto CiscoWebex Cloudunder Japaneseenvironment

Check dropoption inparticipantlist ofWebexRoomDevice(SX20Quick Set)duringWebexmeetingunderJapaneseenvironment




PassedWebex DX80 ->Cisco WebexCloud -> WebexTeams for iOSWebex Teams foriOS -> Add ->Cisco WebexCloud -> WebexTeams forWindows

Verify whetherCisco WebexTeams for iOScall can bedropped fromparticipant listof CiscoWebex DX80during CiscoWebexmeetingamong CiscoWebex DX80,Cisco WebexTeams for iOSand CiscoWebex Teamsfor Windows,all registeredto CiscoWebex Cloudunder Japaneseenvironment

Drop thecall fromparticipantlist ofWebexDX80duringWebexmeetingunderJapaneseenvironment


PassedWebex Teams forWindows,WebexTeams for Mac,Webex Room KitPlus-> CiscoWebex Cloud ->Scheduledmeeting

Verify whetherOne Button ToPush meetingreminder with‘Snooze’option isavailable inCisco WebexRoomKit Plusin Japaneseenvironmentfor Scheduledmeetingamong CiscoWebex Teamsfor Windows,Cisco WebexTeams forMacand CiscoWebex RoomKit Plus

CheckOBTPmeetingreminder inWebexRoom KitPlus forScheduledmeetingunderJapaneseenvironment




PassedWebex Teams forWindows,WebexTeams for Mac,Webex RoomKit-> CiscoWebex Cloud ->Scheduledmeeting

Verify whether‘Snooze’function inOne Button ToPush meetingreminderworkssuccessfully inCisco WebexRoom Kit inJapaneseenvironmentfor Scheduledmeetingamong CiscoWebex Teamsfor Windows,Cisco WebexTeams forMacand CiscoWebex RoomKit

CheckOBTP‘Snooze’functionalityin WebexRoom KitunderJapaneseenvironmentduringScheduledmeeting


PassedWebex DX80 ->Cisco WebexCloud -> WebexRoom Kit WebexTeams forWindows,WebexTeams for iOS,Webex DX80 ->Cisco WebexCloud ->Scheduledmeeting

Verify whether‘Join & Endcurrent’ optionworkssuccessfully inCisco WebexDX80 when itreceivesremainderaboutScheduledmeeting duringits call withCisco WebexRoom Kit

Check thefunctionalityof ‘Join &Endcurrent’ inWebexDX80 inJapaneseenvironmentduring call




PassedWebex Teams forWindows,WebexTeams forAndroid, WebexRoomKit Plus ->Cisco WebexCloud ->Scheduledmeeting WebexTeams forWindows,WebexTeams for Mac,Webex Room KitPlus -> CiscoWebex Cloud ->Scheduledmeeting

Verify whetherScheduledmeeting detailsinvolvingCisco WebexRoomKit Plusas one of theparticipants isavailable inCiscoTelePresenceTouch 10 ofCisco WebexRoomKit Plusin Japaneseenvironmentunderupcomingmeeting list

Checkupcomingmeetingslist inWebexRoom KitPlus underJapaneseenvironment


PassedWebex Teams forMac, WebexTeams forAndroid, WebexDX80 -> CiscoWebex Cloud ->Scheduledmeeting WebexTeams forWindows,WebexTeams for iOS,Webex DX80 ->Cisco WebexCloud ->Scheduledmeeting

Verify whetherScheduledmeetingsinvolvingCisco WebexDX80 as oneof theparticipants isavailable inOn-ScreenDisplay ofCisco WebexDX80 inJapaneseenvironmentunderupcomingmeeting list

Checkupcomingmeetingslist inWebexDX80underJapaneseenvironment




PassedWebex Board 55-> Cisco WebexCloud -> WebexRoom Device(SX10 QuickSet)(Wirelesssharing)

Verify whetheruser is notifiedabout theincoming callfrom CiscoWebex Board55 duringWirelesssharing inCisco WebexRoom Device(SX10 QuickSet) inJapaneseenvironment,paired withCisco WebexTeams forWindows

Checkincomingcall inWebexRoomDevice(SX10Quick Set)underJapaneseenvironmentduringWirelesssharing outof call


PassedWebex DX80 ->Cisco WebexCloud -> WebexBoard 55 WebexRoomKit Plus ->Cisco WebexCloud -> WebexDX80

Verify whetheruser is notifiedabout theincoming callfrom CiscoWebex RoomKit Plus inCisco WebexDX80 inJapaneseenvironmentwhich isalready invideo call withCisco WebexBoard 55

Checksecond callindicationin WebexDX80 inJapaneseenvironmentwhich isalready invideo callwith WebexBoard 55




PassedWebex RoomDevice (MX200G2) (Paired withWebex Teams forWindows)->Cisco WebexCloud -> WebexBoard 55(Wirelesssharing) WebexDX80 -> CiscoWebex Cloud ->Webex RoomDevice (MX200G2)

Verify whetheruser is able toview secondcall indicationfrom CiscoWebex DX80in CiscoWebex RoomDevice(MX200 G2)in JapaneseenvironmentduringWirelesssharing in avideo call withCisco WebexBoard 55

Checksecond callindicationin WebexRoomDevice(MX200G2) inJapaneseenvironmentduringWirelesssharingwithWebexBoard 55


PassedWebex DX70 ->Cisco WebexCloud -> WebexRoomKit (Pairedwith WebexTeams for Mac)(Wirelesssharing)

Verify whetheruser is notifiedabout theincoming callfrom CiscoWebex DX70duringWirelesssharing inCisco WebexRoom Kit inJapaneseenvironment,paired withCisco WebexTeams forMac

Checkincomingcall inWebexRoomKit inJapaneseenvironmentduringWirelesssharing outof call


PassedWebex Room KitPlus -> CiscoWebex Cloud ->Webex Board 55Webex DX80 ->Cisco WebexCloud -> WebexRoom Kit Plus

Verify whetherOn-going callwith CiscoWebex Board55 ends inCisco WebexRoomKit Plusin Japaneseenvironmentafteranswering theincoming callfrom CiscoWebex DX80successfully

Checkdisconnectionof On-goingcall afteransweringsecond callin WebexRoom KitPlus underJapaneseenvironment




PassedWebex Teams forWindows,WebexTeams forAndroid, WebexRoomKit Plus ->Cisco WebexCloud ->Scheduledmeeting WebexDX70 -> CiscoWebex Cloud ->Scheduledmeeting

Verify whether‘Let-in’ optionis seen underparticipants listof CiscoWebex RoomKit Plus inJapaneseenvironmentwhen CiscoWebex DX70tries to joinScheduledmeetingamong CiscoWebex Teamsfor Windows,Cisco WebexTeams forAndroid andCisco WebexRoomKit Plusby dialingmeeting videoaddress

Check‘Let-in’option inJapaneseenvironmentof WebexRoom KitPlus whenWebexDX70requests tojoinScheduledmeeting




PassedWebex Teams forWindows,WebexTeams for iOS,Webex Room Kit-> Cisco WebexCloud ->Scheduledmeeting WebexRoom Device(SX20Quick Set)-> Cisco WebexCloud ->Scheduledmeeting

Verify whetheruser is able toview theparticipantwaiting stringfrom theOn-ScreenDisplay ofCisco WebexRoom Device(SX20 QuickSet) inJapaneselanguagewhenit tries to jointhe Scheduledmeetingamong CiscoWebex Teamsfor Windows,Cisco WebexTeams for iOSand CiscoWebex RoomKit by dialingthe meetingvideo addresssuccessfully

Checkparticipantwaitingstring inJapanesefrom theOSD ofWebexRoomDevice(SX20Quick Set)




PassedWebex Teams forWindows,WebexTeams forAndroid, WebexRoom Device(SX10 QuickSet)-> CiscoWebex Cloud ->Scheduledmeeting WebexRoom Device(MX200 G2) ->Cisco WebexCloud ->Scheduledmeeting

Verify whether‘Let-in’ optionis seen underparticipants listof CiscoWebex RoomDevice (SX10Quick Set) inJapaneseenvironmentusing remotecontrol whenCisco WebexRoom Device(MX200 G2)tries to joinScheduledmeetingamong CiscoWebex Teamsfor Windows,Cisco Teamsfor Androidand CiscoWebex RoomDevice (SX10Quick Set) bydialingmeeting videoaddress

Check‘Let-in’option inJapaneseenvironmentof WebexRoomDevice(SX10Quick Set)usingremotecontroller




PassedWebex Teams forMac, WebexTeams forAndroid, WebexRoom Kit Plus->Cisco WebexCloud ->Scheduledmeeting WebexDX70 -> CiscoWebex Cloud ->Scheduledmeeting

Verify whetherCisco WebexDX70 inJapaneseenvironment isconnected tothe Scheduledmeetingamong CiscoWebex Teamsfor Mac, CiscoWebex Teamsfor Androidand CiscoWebex RoomKit Plus, when'join meeting'request fromCisco WebexDX70 bydialingmeeting videoaddress isaccepted byCisco WebexRoomKit Plussuccessfully

Check theparticipationof WebexDX70 inScheduledmeeting bydialing themeetingvideoaddress


PassedWebex Teams forWindows,WebexTeams forAndroid , WebexDX80 -> CiscoWebex Cloud ->Scheduledmeeting(Presentationsharing)

Verify whetherPresentationsharing fromCisco WebexDX80 duringScheduledmeeting inJapaneseenvironmentamong CiscoWebex Teamsfor Windows,Cisco WebexTeams forAndroid andCisco WebexDX80 workssuccessfully

CheckPresentationsharingfromWebexDX80duringScheduledmeeting inJapaneseenvironment




PassedWebex Teams forWindows,WebexTeams forAndroid, WebexRoom Kit ->Cisco WebexCloud ->Scheduledmeeting (Screensharing)

Verify whetherscreen sharedfrom CiscoWebex Teamsfor AndroidduringScheduledmeeting inJapaneseenvironmentamong CiscoWebex Teamsfor Windows,Cisco WebexTeams forAndroid andCisco WebexRoom Kit isavailable inCisco WebexRoom Kit

Checkscreenshared fromWebexTeams forAndroid inWebexRoom KitduringScheduledmeeting inJapaneseenvironment


PassedWebex Teams forWindows,WebexTeams foriOS(iPad),Webex RoomDevice(SX20Quick Set) ->Cisco WebexCloud ->Scheduledmeeting (Screensharing)

Verify whetherscreen sharedfrom CiscoWebex Teamsfor iOS(iPad)duringScheduledmeeting inJapaneseenvironmentamong CiscoWebex Teamsfor Windows,Cisco WebexTeams foriOS(iPad) andCisco WebexRoomDevice(SX20Quick Set) isavailable inCisco WebexRoom Device(SX20 QuickSet)

Checkscreenshared fromWebexTeams foriOS(iPad)in WebexRoomDevice(SX20Quick Set)duringScheduledmeeting inJapaneseenvironment




PassedWebex Teams forWindows,WebexTeams for Mac,Webex Room KitPlus -> CiscoWebex Cloud ->Scheduledmeeting WebexDX70 -> CiscoWebex Cloud ->Scheduledmeeting(Presentationsharing)

Verify whetherPresentationsharing fromCisco WebexDX70 joinedas guestparticipant toScheduledmeetingamong CiscoWebex Teamsfor Windows,Cisco WebexTeams forMacand CiscoWebex RoomKit Plus bydialingmeeting videoaddress workssuccessfully

CheckPresentationsharingfromWebexDX70joined toScheduledmeeting bydialingmeetingvideoaddress


PassedWebex Teams forWindows,WebexTeams forAndroid, WebexRoom Device(SX10Quick Set)-> Cisco WebexCloud ->Scheduledmeeting WebexRoomKit (Pairedwith WebexTeams forMac)-> CiscoWebex Cloud ->Scheduledmeeting(Wirelesssharing)

Verify whetherWirelesssharing fromCisco WebexRoom Kitpaired withCisco WebexTeams forMacjoined as guestparticipant toScheduledmeetingamong CiscoWebex Teamsfor Windows,Cisco WebexTeams forAndroid andCisco WebexRoom Device(SX10 QuickSet) by dialingmeeting videoaddress workssuccessfully

CheckWirelesssharingfromWebexRoom Kitjoined toScheduledmeeting bydialingmeetingvideoaddress




PassedWebex Room KitPlus -> CiscoWebex Cloud ->Webex Teams forWindows WebexTeams forWindows -> Add-> Cisco WebexCloud -> WebexTeams forAndroid (Pairedwith WebexRoom Device(SX10 QuickSet))(Presentationsharing)

Verify whetherPresentationsharing fromCisco WebexRoomKit Plusin Japaneseenvironmentduring Adhocmeetingamong CiscoWebex RoomKit Plus, CiscoWebex Teamsfor Windowsand CiscoWebex Teamsfor Androidpaired withCisco WebexRoom Device(SX10 QuickSet) workssuccessfully

CheckPresentationsharingfromWebexRoom KitPlus inJapaneseenvironmentduringAdhocmeeting


PassedWebex Teams forWindows,WebexTeams for iOS,Webex Teams forAndroid -> CiscoWebex Cloud ->Scheduledmeeting WebexRoomKit Plus ->Cisco WebexCloud ->Scheduledmeeting

Verify whetherPeople Countin CiscoWebex RoomKit Plus in aScheduledmeetinginitiated fromCisco WebexTeams forWindows withCisco WebexTeams for iOSand CiscoWebex Teamsfor Androidusers workssuccessfullyunder Japaneseenvironment,after dialingthe Scheduledmeeting videoaddress fromCisco WebexRoomKit Plus

CheckPeopleCount inWebexRoom KitPlus underJapaneseenvironmentin aScheduledmeeting




PassedWebex Teams forWindows,WebexTeams for iOS,Webex Teams forAndroid -> CiscoWebex Cloud ->Scheduledmeeting WebexDX70 -> CiscoWebex Cloud ->Scheduledmeeting

Verify whetherCisco WebexDX70 withJapaneselocale can jointhe Scheduledmeetinginitiated fromCisco WebexTeams forWindows withCisco WebexTeams for iOSand CiscoWebex Teamsfor Androiduser, bydialing thevideo addressfrom CiscoWebex DX70successfully

JoinScheduledmeetingfromWebexDX70 inJapaneselocale




PassedWebex Teams forWindows,WebexTeams for iOS,Webex Teams forAndroid -> CiscoWebex Cloud ->Scheduledmeeting WebexRoomKit Plus ->Cisco WebexCloud ->Scheduledmeeting

Verify whetherCisco WebexTeams forWindows canbe marked asfavorite fromthe participantlist of CiscoWebex RoomKit Plus underJapaneseenvironmentduringScheduledmeetinginitiated fromWebex Teamsfor Windowswith WebexTeams for iOSand WebexTeams forAndroid, afterjoiningScheduledmeeting fromCisco WebexRoomKit Plusby dialing themeeting videoaddresssuccessfully

MarkWebexTeams forWindows asfavoritefromparticipantlist ofWebexRoom KitPlus underJapaneseenvironmentduringScheduledmeeting


PassedWebex DX70 ->Cisco WebexCloud -> WebexTeams foriOS(Paired withWebex RoomKit)

Verify whetherscreen sharedfrom CiscoWebex Teamsfor iOS pairedwith CiscoWebex RoomKit is availableduring a videocall with CiscoWebex DX70,all registeredwith CiscoWebex Cloudin Japaneseenvironmentsuccessfully

Checkscreenshared fromWebexTeams foriOS pairedwith WebexRoom KitunderJapaneseenvironmentduring callwith WebexDX70




PassedWebex Room Kit->Cisco WebexCloud ->WebexBoard 55 WebexBoard 55 ->Cisco WebexCloud ->WebexRoom Kit Plus

Verify whetherCisco WebexRoomKit Plusin Japaneseenvironmentcan accept andjoin theinvitation ofCisco Webexmeeting fromCisco WebexBoard 55registered toCisco WebexCloudsuccessfully

Join WebexmeetingfromWebexRoom KitPlus withJapaneselocale


PassedWebex Teams forMac, WebexTeams for iOS,Webex Teams forAndroid -> CiscoWebex Cloud ->Scheduledmeeting WebexRoomDevice(SX80Codec)(Presentationsharing) -> CiscoWebex Cloud ->Scheduledmeeting

Verify whetherPresentationsharing can beinitiated fromweb UI ofCisco WebexRoomDevice(SX80Codec) in aScheduledmeetinginitiated fromCisco WebexTeams forMacwith CiscoTeams for iOSand CiscoWebex Teamsfor Androidusers workssuccessfullyunder Japaneseenvironment,after dialingthe Scheduledmeeting videoaddress fromCisco WebexRoomDevice(SX80Codec)

Startpresentationvia web UIof WebexRoomDevice(SX80Codec) in aScheduledmeetingunderJapaneseenvironment




PassedNAVerify whethercontacts addedto favoritesfrom recentstab of CiscoWebex RoomDevice(SX80Codec) viaWeb UI isreflecting inCiscoTelePresenceTouch 10 ofCisco WebexRoomDevice(SX80Codec) underJapaneseenvironment

Checkcontactsadded tofavoritesfromrecents tabvia web UIis reflectingin Touch 10of WebexRoomDevice(SX80Codec)underJapaneseenvironment


PassedWebex Board 55-> Cisco WebexCloud -> WebexTeams forWindows(Whiteboardsharing)

Verify whetherWhiteboard isauto sharedfrom CiscoWebex Board55 in Japaneseenvironment toCisco WebexTeams forWindowsduring videocallsuccessfully

AutoshareofWhiteboardfromWebexBoard 55 inJapaneseenvironmentto WebexTeams forWindowsduring call

UCJ12.5PH3S.BoardOS.G.001

PassedWebex Board55(1) -> CiscoWebex Cloud ->Webex Board55(2)(Whiteboardsharing)

Verify whetherWhiteboard isauto sharedfrom CiscoWebex Board55(1) inJapaneseenvironment toCisco WebexBoard 55(2)during videocallsuccessfully

AutoshareofWhiteboardfromWebexBoard 55(1) inJapaneseenvironmentto WebexBoard 55(2) duringcall




PassedNAVerify whetherscreen sharecan beresumed afterperformingannotation inCisco WebexBoard 55outside call inJapaneseenvironmentsuccessfully

Resumescreen shareafterannotationin WebexBoard 55 inJapaneseenvironmentoutside call


PassedWebex Board 55-> Cisco WebexCloud -> WebexTeams forWindows

Verify whether‘Resume’option isavailable inJapaneseenvironmentafterperformingannotationduringPresentationsharing inCisco WebexBoard 55during callwith CiscoWebex Teamsfor Windows

Check‘Resume’option inJapaneseenvironmentafterannotationin WebexBoard 55during call


PassedWebex Board55(1) -> CiscoWebex Cloud ->Webex Board55(2)(Presentationsharing)

Verify whetherPresentationsharing can beresumed afterperformingannotation inJapaneseenvironment inCisco WebexBoard 55(1)during callwith CiscoWebex Board55(2)successfully

‘Resume’Presentationsharingafterannotationin Japaneseenvironmentduring callin WebexBoard 55




PassedWebex Board55(Paired withWebex Teams forWindows)(Wirelesssharing) -> CiscoWebex Cloud ->Webex Teams forMac

Verify whetherWirelesssharing can beresumed afterperformingannotation inJapaneseenvironment inCisco WebexBoard55(Paired withWebex Teamsfor Windows)during callwith CiscoWebex Teamsfor Macsuccessfully

‘Resume’Wirelesssharingafterannotationin Japaneseenvironmentduring callin WebexBoard 55


PassedNAVerify whether‘Bestoverview’option isavailable inJapaneseenvironmentunder‘AdvancedSettings’menuof CiscoWebex Board55

Check ‘BestOverview’option inJapaneseenvironmentunderadvancedsettingsmenu inWebexBoard 55


PassedNAVerify whetheruser is able toview warningmessage inJapanese fromthe homescreen ofCisco WebexBoard 55 forlow ultrasoundvolume

Checkwarningmessage inJapanese forlowultrasoundvolume inWebexBoard 55




PassedNAVerify whetheruser is able toview warningmessage inJapanese fromthe homescreen ofCisco WebexBoard 55whenultrasoundvolume is set‘Off’

Checkwarningmessage inJapanesewhenultrasoundvolume isset ‘Off’ inWebexBoard 55


PassedNAVerify whetheruser is able toget suggestionson users whensome part ofuser id isentered in‘Search’ fieldin CiscoWebex Board55 underJapaneseenvironment

Checksuggestionsin WebexBoard 55underJapaneseenvironmentwhen userid is enteredin searchfields


PassedWebex Teams forWindows,WebexTeams forAndroid, WebexBoard 55 ->Cisco WebexCloud ->Scheduledmeeting WebexRoomKit Plus ->Cisco WebexCloud ->Scheduledmeeting

Verify whetherCisco WebexBoard 55 inJapaneseenvironment isnotified whenCisco WebexRoomKit Plustries to join theCisco Webexbackedmeetingamong CiscoWebex Board55,CiscoWebex Teamsfor Androidand CiscoWebex Teamsfor Windows

Notificationin WebexBoard 55whenWebexRoom KitPlus iswaiting tojoin Webexbackedmeeting




PassedWebex Board 55-> Cisco WebexCloud -> WebexRoom Kit PlusWebex Board 55-> Add -> CiscoWebex Cloud ->Webex Teams forAndroid

Verify whetherCisco WebexTeams forAndroid canbe invited tothe On-goingcall betweenCisco WebexBoard 55 andCisco WebexRoomKit Plusvia ‘People’tab in CiscoWebex Board55 in Japaneseenvironmentsuccessfully

Invitepeople toon-goingcall from‘People’ tabin WebexBoard 55 inJapaneseenvironment


CSCvj06866FailedWebex roomdevice (DX80) ->Cisco WebexCloud -> Webexroom device(MX300 G2)

Verify whether'Joined the call'notification isavailable inCisco Webexroom device(MX300 G2)afteranswering theincoming callfrom CiscoWebex roomdevice (DX80)

Check'Joined thecall'notificationin MX300G2 afteransweringtheincomingcall

Cisco Webex Board 55DefectsStatusCall

ComponentFlow



Test Results SummaryCisco Webex Board 55

PassedWebex Teamsfor Windows,Webex Teamsfor iOS,Webex Teamsfor Android ->Cisco WebexCloud ->ScheduledmeetingWebexBoard 55 ->Cisco WebexCloud ->Scheduledmeeting

Verify whether user isable to view the‘Recording’ indicatorfrom the screen of CiscoWebex Board 55 inJapanese environmentwhen Cisco WebexMeeting among CiscoWebex Teams forWindows, Cisco WebexTeams for iOS, CiscoWebex Teams forAndroid andCiscoWebexBoard 55 is beingrecorded from CiscoWebex Teams for iOS

‘Recording’indicator inWebex Board 55in Japaneseenvironmentwhen meeting isbeing recordedfrom WebexTeams for iOS

UCJ12.5SEFT.BoardOS.G.001

PassedWebex Teamsfor Windows,Webex Teamsfor iOS,Webex Teamsfor Android,Webex Board55 -> CiscoWebex Cloud-> Scheduledmeeting

Verify whether user isable to view the‘Recording’ indicatorfrom the screen of CiscoWebex Board 55 whenCisco ScheduledMeetingamong Cisco WebexTeams for Windows,Cisco Webex Teams foriOS, Cisco Webex Teamsfor Android and CiscoWebex Board 55, is beingrecorded from CiscoWebex Teams for iOS inJapanese environment

‘Recording’indicator inWebex Board 55in Japaneseenvironmentduring Scheduledmeeting


PassedNAVerify whether ‘DiscoverPAC script URLautomatically’ option isavailable under AutomaticProxy configuration inCisco Webex Board 55 inJapanese environment

‘Discover PACscript URLautomatically’option in WebexBoard 55 inJapaneseenvironment


PassedNAVerify whether CiscoWebex Board 55 inJapanese environmentlocates PAC fileautomatically when‘Discover PAC scriptURL automatically’ is‘On’

Automatic PACfile detectionwhen ‘DiscoverPAC script URLautomatically’ is‘On’ in WebexBoard 55 inJapaneseenvironment




PassedNAVerify whether snapshotof 4K Presentationsharing from CiscoWebex Board 55 saved toCisco Webex Teams forMobile clients(iOS/Android) in Japaneseenvironment is availablewith 1080p resolution

Snapshot of 4Kshare fromWebex Board 55with 1080presolution inWebex Teams forMobile clients inJapaneseenvironment


PassedNAVerify whether local (Outof call) 4K Presentationsharing in Cisco WebexBoard 55 in Japaneseenvironment workssuccessfully

Local (Out ofcall) 4KPresentationsharing in WebexBoard 55 inJapaneseenvironment


PassedNAVerify whether snapshotof 4K Presentationsharing from CiscoWebex Board 55 saved toCisco Webex Teams forDesktopclients(Windows/Mac) inJapanese environment isavailable with 1080presolution

Snapshot of 4Kshare fromWebex Board 55with 1080presolution inWebex Teams forDesktop clients inJapaneseenvironment


PassedNAVerify whether annotationduring local (Out of call)4K Presentation sharingin Cisco Webex Board 55in Japanese environmentworks successfully

Annotations onlocal (Out of call)4K Presentationsharing in WebexBoard 55 inJapaneseenvironment


PassedNAVerify whether user isable to set and viewUltrasound pairingvolume range as ‘High’under Settings menuunder Japaneseenvironment in CiscoWebex Board 55successfully

Ultrasoundpairing volumerange ‘High’under ‘Settings’menu in WebexBoard 55 inJapaneseenvironment




PassedNAVerify whether user isable to set and viewUltrasound pairingvolume range as ‘Low’under Settings menuunder Japaneseenvironment in CiscoWebex Board 55successfully

Ultrasoundpairing volumerange ‘Low’under ‘Settings’menu in WebexBoard 55 inJapaneseenvironment


PassedNAVerify whether newcolors (Yellow, Purple)added to the whiteboardis available underJapanese environment inCisco Webex Board 55

Check two newcolors (Yellow,Purple) in thewhiteboard ofWebex Board 55in Japaneseenvironment


PassedNAVerify whetherWhiteboard created withnew colors (Yellow andPurple) in Cisco WebexBoard 55 is available inCisco Webex Teams forWindows in Japaneseenvironment after savingthe work from CiscoWebex Board 55

Whiteboardcreated with newcolors in WebexTeams forWindows inJapaneseenvironment aftersavingwhiteboard fromWebex Board 55


PassedWebex Board55 -> CiscoWebex Cloud-> WebexTeams forAndroid(Paired withWebex RoomKit Plus)

Verify whether newlyadded colors (Yellow andPurple) in Whiteboard ofCisco Webex Board 55 inJapanese environmentworks successfully duringcall with Cisco WebexRoom Kit Plus pairedwith Cisco Webex Teamsfor Android

Check thefunctionality oftwo new colors ofthe whiteboardduring call withWebex Room KitPlus


PassedNAVerify whetherWhiteboard created withnew colors (Yellow andPurple) in Cisco WebexBoard 55 is available inCisco Webex Teams forMobileclients(Android/iOS) inJapanese environmentafter saving thework fromCisco Webex Board 55

Whiteboard withnew colors inWebex Teams forMobile clients inJapaneseenvironment aftersavingwhiteboard fromWebex Board 55




PassedNAVerify whether ‘Undo’ inWhiteboard of CiscoWebex Board 55 inJapanese environmentworks successfully

‘Undo’functionality inWhiteboard ofWebex Board 55in Japaneseenvironment


PassedWebex Board55(1) -> CiscoWebex Cloud-> WebexBoard 55(2)

Verify whether ‘Undo’ inWhiteboard workssuccessfully during callbetween Cisco WebexBoard 55 (1) and CiscoWebex Board 55 (2) inJapanese environment

‘Undo’functionality inWhiteboard ofWebex Board 55in Japaneseenvironmentduring call


PassedWebex Teamsfor Mac,Webex Teamsfor Android,Webex Board55 -> CiscoWebex Cloud-> Scheduledmeeting

Verify whether OneButton to Push (OBTP)notification in CiscoWebex Board 55 inJapanese environmentduring Cisco Scheduledmeeting among CiscoWebex Teams for Mac,Cisco Webex Teams forAndroid andCiscoWebexBoard 55 workssuccessfully

‘OBTP’notification inWebex Board 55in Japaneseenvironment


PassedWebex Teamsfor Windows,Webex RoomKit Plus,Webex Board55 -> CiscoWebex Cloud-> Scheduledmeeting

Verify whether user isable to join CiscoScheduledmeeting amongCisco Webex Board 55,Cisco Webex Teams forWindows and CiscoWebex Room Kit Pluswith One Button to Pushbutton from CiscoWebexBoard 55 in Japaneseenvironment successfully

Join Scheduledmeeting withOBTP button inWebex Board 55in Japaneseenvironment




PassedWebex Board55 -> CiscoWebex Cloud-> WebexRoomKitWebexBoard 55,Webex Teamsfor Windows,Webex Teamsfor iOS ->Cisco WebexCloud ->Scheduledmeeting

Verify whether user isable to view ‘One Buttonto Push’ meetingremainder for CiscoScheduledmeeting amongCisco Webex Board 55,Cisco Webex Teams forWindows and CiscoWebex Teams for iOS inCisco Webex Board 55which is in video call withCisco Webex Room Kitin Japanese environment

‘OBTP’ meetingremainder inWebex Board 55during call withWebex Room Kitin Japaneseenvironment


PassedWebex Teamsfor Windows,Webex TeamsforAndroid,WebexBoard 55 ->Cisco WebexCloud ->ScheduledmeetingWebexBoard 55 ->Add -> CiscoWebex Cloud-> WebexDX80(Personalmode)

Verify whether CiscoWebex DX80 in Personalmode can be invited toCisco Scheduled meetingamong Cisco WebexTeams for Windows,Cisco Webex Teams forAndroid andCiscoWebexBoard 55, from CiscoWebex Board 55 inJapanese environment

Invite WebexDX80 in Personalmode toScheduledmeeting fromWebex Board 55in Japaneseenvironment


PassedWebex Board55 -> CiscoWebex Cloud-> WebexRoom Device(SX20 QuickSet)

Verify whether micmutedfrom Cisco Webex RoomDevice (SX20 Quick Set)is reflecting under‘People’ tab of CiscoWebex Board 55 inJapanese environmentduring call

Mic mutedindication under‘People’ tab ofWebex Board 55in Japaneseenvironmentduring call withWebex RoomDevice




PassedNAVerify whether multiplewhiteboards created inCisco Webex Board 55 inJapanese environment canbe saved to non-CiscoWebex user of CiscoWebex Teams forDesktop client (Windows)space successfully

Save multiplewhiteboards fromWebex Board 55in Japaneseenvironment tonon-CiscoWebexuser of WebexTeams forDesktop client


PassedNAVerify whetherwhiteboard created inCisco Webex Board 55 inJapanese environment canbe saved to non-CiscoWebex user of CiscoWebex Teams for Mobileclients (iOS/Android)space successfully

Save whiteboardfrom WebexBoard 55 inJapaneseenvironment tonon-CiscoWebexuser of WebexTeams forMobileclients


PassedWebex Board55 -> CiscoWebex Cloud-> WebexRoom Device(SX80 Codec)(Presentationsharing)WebexBoard 55 ->Add -> CiscoWebex Cloud-> WebexTeams for iOS

Verify whetherPresentation screen sharedfrom Cisco Webex RoomDevice (SX80 Codec) isavailable in Cisco WebexBoard 55 in Japaneseenvironment during CiscoWebex meeting amongCisco Webex RoomDevice (SX80 Codec),Cisco Webex Board 55and Cisco Webex Teamsfor iOS

Presentationshared fromWebex RoomDevice (SX80Codec) in WebexBoard 55 inJapaneseenvironmentduring Webexmeeting


PassedWebex Board55 -> CiscoWebex Cloud-> WebexDX70 (Pairedwith WebexTeams forWindows)(Wirelesssharing)WebexBoard 55 ->Add -> CiscoWebex Cloud-> WebexTeams forAndroid

Verify whether Wirelesscontent shared fromCiscoWebex DX70 (Pairedwith Cisco Webex TeamsforWindows) is availablein Cisco Webex Board 55in Japanese environmentduring Cisco Webexmeeting among CiscoWebex DX70, CiscoWebex Board 55 andCisco Webex Teams forAndroid

Screen sharedfrom WebexDX70 in WebexBoard 55 inJapaneseenvironmentduring Webexmeeting




PassedWebex Board55 (Pairedwith WebexTeams forMac) (Screensharing) ->Cisco WebexCloud ->Webex RoomKit Plus

Verify whether screensharing can be resumedafter annotation in CiscoWebex Board 55 (pairedwith Cisco Webex Teamsfor Mac) in Japaneseenvironment duringWireless sharing withCisco Webex Room KitPlus successfully

Resume screenshare afterannotation inWebex Board 55in Japaneseenvironmentduring call


PassedWebex Board55(Presentationsharing) ->Cisco WebexCloud ->Webex Teamsfor Android(Paired withWebex RoomDevice (SX20Quick Set)

Verify whetherPresentation sharing canbe resumed afterannotation in CiscoWebex Board 55 inJapanese environmentduring call with CiscoWebex Room Device(SX20 Quick Set) pairedwith Cisco Webex Teamsfor Android

ResumePresentationshare afterannotation inWebex Board 55in Japaneseenvironmentduring call


PassedWebex Board55 (Pairedwith WebexTeams forWindows)(Wirelesssharing) ->Cisco WebexCloud ->Webex Teamsfor Mac

Verify whetherAnnotation duringWireless sharing in CiscoWebex Board 55 pairedwith Cisco Webex Teamsfor Windows in Japaneseenvironment workssuccessfully during callwith Cisco Webex Teamsfor Mac

Annotationduring Wirelesssharing in WebexBoard 55 inJapaneseenvironmentduring call withWebex Teams forMac


PassedWebex Teamsfor Mac,Webex Teamsfor Android,Webex DX70-> CiscoWebex Cloud-> ScheduledmeetingWebexBoard 55 ->Cisco WebexCloud ->Scheduledmeeting

Verify whetherWhiteboarding fromCisco Webex Board 55 inJapanese environmentduring Cisco Scheduledmeeting among CiscoWebex DX70, CiscoWebex Teams for Macand Cisco Webex Teamsfor Android, after CiscoWebex Board 55 joins theCisco Scheduled meetingby dialing the meetingvideo address workssuccessfully

Whiteboardingfrom WebexBoard 55 inJapaneseenvironmentduring Scheduledmeeting




Cisco Meeting ServerDefectsStatusCall Component FlowDescriptionTitleLogical ID

PassedWebRTC1 (Chrome) ->Meeting Server ->WebRTC2 (ChromeAndroid)

Verify whetheran user can besearched andinitiate the callto that user

Search forthe user andmake a callusingWebRTCclient

UCJ12.5.CMS2.3S.CMS.G.008

PassedWebRTC1 (Chrome) ->Meeting Server ->WebRTC2(ChromeAndroid)

Verify whetheractivity likerecent chat tothe people orongoing callwithin thespace can beordered andviewed inrecents tab

View the listof itemsordered bythe recentactivity inWebRTCclient



Verify whetherthe help pagecan be accessedduring themeeting

Accessingthe helppage duringthe meetingusingWebRTCclient


PassedWebRTC1 (Chrome) ->Meeting Server ->WebRTC2 (ChromeAndroid); WebRTC1(Chrome) -> MeetingServer -> WebRTC3(Chrome)

Verify whetherthe participantscan be addedand joined tothe ongoingmeeting

Adding theparticipantsto theongoingmeeting inWebRTCclient


PassedNAVerify whetherthe space addedwith users(WebRTC2 andWebRTC3) inWebRTC1 isautomaticallyreflected at theparticipantsrecent

Automaticreflection ofthe createdspace at itsmember'srecent tabusingWebRTCclient



Test Results SummaryCisco Meeting Server


Verify whetherthere is no appcrash when theuser is able tonavigate backand return tomeeting againduring theactive call

Navigate toback andreturn tomeetingwhen theuser inactive callviaWebRTCclient



Verify whethera participant ina space can bedropped whenjoining themeeting viaManagementandpresentationscreen

Drop aparticipantwhen joiningthe meetingviaManagementpresentationscreen inWebRTCclient



Verify whetherthere is no appcrash whendeleting thespace duringthe meeting viaManagementandpresentationscreen

Delete thespace whenin meetingviaManagementpresentationscreen inWebRTCclient



Verify whetheran user can besearched andinitiate the callto that user

Search forthe user andmake a callusingWebRTCclient



Verify whetheractivity likerecent chat tothe people orongoing callwithin thespace can beordered andviewed inrecents tab

View the listof itemsordered bythe recentactivity inWebRTCclient





Verify whetherthe help pagecan be accessedduring themeeting

Accessingthe helppage duringthe meetingusingWebRTCclient



Verify whetherthe participantscan be addedand joined tothe ongoingmeeting

Adding theparticipantsto theongoingmeeting inWebRTCclient


PassedNAVerify whetherthe user is ableto search forthe user usingMeet option

Click Meetto search forthe userusingWebRTCclient



Verify whetherthe entirescreen can beshared viaManagementandpresentationscreen

Share theentire screenviaManagementandpresentationscreen inWebRTCclient


PassedWebRTC1 (Chrome) ->Meeting Server ->WebRTC2 (ChromeAndroid) WebRTC1(Chrome) -> MeetingServer -> WebRTC3(Chrome)

Verify whetherthe temporaryspace is createdwhen directcalls to one ormore users ismade and thatspace is listedin the recenttab

Direct callsto one ormore userscreatestemporaryspace inWebRTCclient



Verify whetherthe user is ableto host themeeting viaManagementandpresentationscreen

Host themeeting viaManagementpresentationscreen inWebRTCclient





Verify whetherthenotificationsare sent whenan user joinedand left themeeting in thechat history

Display ofnotificationswhen joinedand left themeeting bythe user inthe chathistory inWebRTCclient



Verify whetherthere is no appcrash when theuser is able tonavigate backand return tomeeting againduring theactive call

Navigate toback andreturn tomeetingwhen theuser inactive callviaWebRTCclient



Verify whethera participant ina space can bedropped whenjoining themeeting viaManagementandpresentationscreen

Drop aparticipantwhen joiningthe meetingviaManagementpresentationscreen inWebRTCclient



Verify whetherthere is no appcrash whendeleting thespace duringthe meeting viaManagementandpresentationscreen

Delete thespace whenin meetingviaManagementpresentationscreen inWebRTCclient




PassedNAVerify whetherthe cospace iscreated inCisco MeetingApp /WebRTCclient ismodified usingthe put methodon the/coSpaces nodevia API

Modify thecospacename viaAPI


PassedNAVerify whetherthe membersfor a cospace inCisco MeetingApp /WebRTCclient isretrieved usingthe get methodon the/coSpaces nodevia API

Retrievingthemembersof a cospacevia API


PassedNAVerify whetherthe membersare added in acospace ofCisco MeetingApp /WebRTCclient using thepost method onthe /coSpacesnode via API

Adding themembers ina cospacevia API


PassedNAVerify whetherthe messagesare posted tothe messageboard of acospace inCisco MeetingApp /WebRTCclient using thepost method onthe /coSpacesnode via API

Posting tothe messageboard of acospace viaAPI




PassedWebRTC 1 -> MeetingServer -> WebRTC 2

Verify whetherthe individualcall diagnosticsof CiscoMeeting App /WebRTC clientis generatedusing the postmethod on the/calls node viaAPI

Generatingdiagnosticsfor anindividualcall via API


PassedNAVerify whetherthe detailedinformationabout thesystem status ofCisco MeetingServer /WebRTC clientcan be retrievedusing the getmethod on the/system/statusnode via API

Retrievingsystemstatus viaAPI


PassedNAVerify whetherthe passcode ofa cospace inCisco MeetingServer /WebRTC clientcan bemodified usingthe put methodon the /cospacenode via API

Modifyingthe passcodeof a cospacevia API


PassedNAVerify whetherthe user isgiven with apermission todelete thecospace inCisco MeetingServer /WebRTC clientusing the postmethod on the/cospace nodevia API

Allowpermissionto users fordeleting thecospace of auser via API




PassedNAVerify whetherthe user isgiven with apermission tochange thename of acospace inCisco MeetingServer /WebRTC clientusing the postmethod on the/cospace nodevia API

Allowpermissionto users forchanging thename of acospace viaAPI


PassedWebRTC1 -> CiscoMeeting Server ->WebTRC2; WebRTC1 ->Cisco Meeting Server ->WebRTC3 ; WebRTC1-> Cisco Meeting Server-> CMA1

Verify whetherthe participantcount can beset via API anddisplayedduring the callin CiscoMeeting App/WebRTCclients

Display ofparticipantcount duringthe meetingis set viaAPI


PassedNAVerify whetheruser is able toDelete previouschat messagesin CMA(Android)WebRTCsuccessfully

Deletepreviouschatmessages inCMA(Android)WebRTC


PassedNAVerify whetheruser is able toview themessageindicator forUnread chatmessages inCMA(Windows)successfully

Check forUnreadmessageindicator forchatmessages inCMA(Windows)




PassedNAVerify whetheruser is able toview themessageindicator forUnread chatmessages inWebRTC -Firefox inCMA(Android)successfully

Check forUnreadmessageindicator forchatmessages inWebRTC inFirefox -CMA(Android)


PassedNAVerify whetheruser is unableto view theIncomingmessagenotification forchat messagesin WebRTC inChrome -CMA(Android)successfully

Incomingmessagenotificationis notavailable forchatmessages inWebRTC inChrome -CMA(Android)


PassedNAVerify whetheruser is able toAuto sign-in inCMA (IPhone)successfully

Check forAuto sign-inin CMA(IPhone)


PassedNAVerify whetheruser is able toSearch forcontacts inWebRTC inChrome -CMA(Android)successfully

Search forcontacts inWebRTC inChrome -CMA(Android)


PassedNAVerify whetheruser is able tomute or unmutethemicrophoneat any timeduring ameeting inWebRTC -CMA(Android)successfully

Mute orUnmute themicrophoneat any timeduring ameeting inWebRTC-CMA(Android)




PassedNAVerify whethergroup chat canbe done inspace createdby a user fromWebRTC clientand adds otherusers who arelogged in fromCisco MeetingApp forWindows andCisco MeetingApp for iPadsuccessfully

Group chatbetweendifferentCMA clients


PassedNAVerify whetherchat option canbe disabledusing putmethod on thecall profilesnode via API inCisco MeetingServer

Disable thechat optionbetweenusers forCMA viaAPI


PassedWebRTC1(Chrome) ->Meeting Server ->WebRTC2(ChromeAndroid)WebRTC1(Chrome) ->Meeting Server->WebRTC3(Chrome)

Verify whetherthe WebRTCclients/ CiscoMeeting App isable to start andstop thepresentationwhile mutingthe call

Start andstop thepresentationbetweenCMA/WebRTCclients whilemuting themeeting



Verify whetherthe space namecan be editedduring themeeting inWebRTCclients/ CiscoMeeting App

Editing thespace nameduring themeeting inCMA/WebRTCclients




PassedNAVerify whetheruser is unableto login toCMA installedin iPhone withwrong usercredentials

Checkwhether useris unable tologin toCMAinstalled iniPhone withwrongcredentials


PassedNAVerify whetheruser is unableto login toCMA installedin Windowswith wronguser credentials

Checkwhether useris unable tologin toCMAinstalled inWindowswith wrongcredentials


PassedCMA (iPhone) ->Meeting Server -> CMAWebRTC

Verify whetheraudio is notshared fromCMA(iPhone)in a call withCMAWebRTCclient aftermuting fromCMA iPhone

Mute Audiofrom CMAinstalled iniPhone andmake call toCMAWebRTCclient andcheckwhethervideo is notshared


PassedCMAWebRTC ->Meeting Server -> CMA(iPhone) (Decline)

Verify whetherincoming callcan be declinedfrom CMA(iPhone) whenit receives callfrom CMAWebRTC

Decline thecall fromCMAinstalled iniPhone


PassedNAVerify whetherthe guests arejoined in ameeting usingthe web link

Invite gueststo joinmeting viathe web link




PassedCMA1 (WebRTC1) ->Meeting Server -> CMA2(WebRTC2)

Verify whetherthe user canjoin theongoingmeeting asguest as thesecondparticipant

Join theongoingmeeting as aguest as thesecondparticipant


PassedNAVerify whetherthe meetingspace can becreated in CMSweb admin anduser joins themeeting spaceas guest

Createmeetingspace inCMS Webadmin andjoin thespace asguest


PassedNAVerify whetherthe user gets"Meeting NotFound" promptwhen user joinsthe meeting asa guest withoutentering thepasscode butthe meetingspace is setwith passcodein web adminUI

Join meetingas a guestwithoutpasscodewhere themeetingspace is setwith thepasscode inCMS WebAdmin


PassedNAVerify whetherthe user getsthe friendlyname promptwhile joiningmeeting as theguest

Provide thefriendlyname for themeetingwhilejoiningmeeting asthe guest


PassedNAVerify whetherthe user gets anerror promptwhen providingthe incorrectmeetingpasscode whilejoiningmeetingas the guest

Enter theincorrectmeetingpasscodewhilejoiningmeeting as aguest




PassedCMA1 (WebRTC1) ->Meeting Server -> CMA2(WebRTC2)

Verify whetherthe user can getthe web link tojoin meeting asa guest fromthe call info

Web link tojoin meetingas a guestfrom the callinfo


PassedNAVerify whetherthe WebRTCsign in pagebackgroundimage can becustomizedusing API toolcalled Postmanin chrome

CustomizetheWebRTCsign in pagebackgroundimage usingAPI tool inChrome

CMS2.4SFCS.CMS.G.019

PassedWebRTC1 (Chrome) ->Meeting Server ->WebRTC2 (Chrome)

Verify whetherthe WebRTCclient isdisplaying therightparticipants listwhen onmeeting afterclient branding

Participantslist when onmeeting inWebRTCclient afterbranding


PassedNAVerify whetherthe WebRTCsign in pagelogo can becustomizedusing API toolcalled Postmanin chrome

CustomizetheWebRTCsign in pagelogo usingAPI tool inChrome


PassedWebRTC (Chrome) ->Meeting Server

Verify whetherthemeeting canbe successfullyinitiated fromWebRTC aftercustomizing thesign in pagelogo using APItool calledPostman inchrome

InitiatemeetingfromWebRTCaftercustomizingthe sign inpage logousing APItool inChrome




PassedNAVerify whetherthe WebRTCbrowser tablabel can becustomized orbranded usingAPI tool calledPostman inchrome

Branding theWebRTCbrowser tablabel usingAPI tool inChrome


PassedCMAWindows(user1) ->CMS -> CMAWebRTC(user2)

Verify whethermeetingbetween CiscoMeeting AppWindows userand CiscoMeeting AppWebRTC(Chrome)user workssuccessfully byclicking theMeet button

Meetingwith CMAWebRTCuser in theorganizationby directlyselecting theuser andclickingMeet button


PassedCMAWindows(user1) ->CMS -> CMAiPhone(user2)

Verify whethermeetingbetween CiscoMeeting AppWindows userand CiscoMeeting AppiPhone userworkssuccessfully byclicking theMeet button

Meetingwith CMAiPhone userin theorganizationby directlyselecting theuser andclickingMeet button


PassedCMAWebRTC(user1) ->CMS -> CMAiPad(user2)

Verify whethermeetingbetween CiscoMeeting AppWebRTC userand CiscoMeeting AppiPad user workssuccessfully byclicking theMeet button

Meetingwith CMAiPad user intheorganizationby directlyselecting theuser andclickingMeet button




PassedCMAWebRTC , CMAiPhone , CMA Windows-> CMS -> Meeting

Verify whethermeetingbetween CiscoMeetingApp inWindows,Cisco MeetingApp in iPhoneand CiscoMeeting AppWebRTC inJapaneseenvironmentworkssuccessfully byjoining thespace created inWebRTC

MeetingbetweenCMAWindows,CMAWebRTC,CMA iniPhone usersby joiningthe space


PassedCMA iPad , CMA iPhone, CMAWindows -> CMS-> Meeting

Verify whethermeetingbetween CiscoMeetingApp inWindows,Cisco MeetingApp in iPhoneand CiscoMeeting AppiPad workssuccessfully byjoining thespace created iniPad

MeetingbetweenCMAWindows,CMA iPad,CMA iniPhone usersby joiningthe space


PassedCMAWebRTC (user1)-> CMS -> CMAWindows(guest user)

Verify whetherCisco MeetingApp Windowsuser can beinvited as guestto join themeeting inCisco MeetingApp WebRTCby sharing theinvitation link

Invite CMAWindowsuser as guestfrom CMAWebRTC




PassedCMA iPhone (user1) ->CMS -> CMAWindows(guest user)

Verify whetherCisco MeetingApp Windowsuser can beinvited as guestto join themeeting inCisco MeetingApp in iPhoneby sharing theinvitation link

Invite CMAWindowsuser as guestfrom CMAiPhone


PassedCMA iPhone (user1) ->CMS -> CMAWebRTC(guest user)

Verify whetherCisco MeetingApp WebRTCuser can beinvited as guestto join themeeting inCisco MeetingApp in iPhoneby sharing theinvitation link

Invite CMAWebRTCuser as guestfrom CMAiPhone


PassedCMA iPad (user1) ->CMS -> CMAWindows(guest user)

Verify whetherCisco MeetingApp Windowsuser can beinvited as guestto join themeeting inCisco MeetingApp in iPad bysharing theinvitation link

Invite CMAWindowsuser as guestfrom CMAiPad


PassedCMAWebRTC (user1)-> CMS -> CMAiPad(guest user)

Verify whetherCisco MeetingApp iPad usercan be invitedas guest to jointhe meeting inCisco MeetingApp WebRTCby sharing theinvitation link

Invite CMAiPad user asguest fromCMAWebRTC




PassedCMAWebRTC (user1)-> CMS -> CMAWindows(guest user)

Verify whetherCisco MeetingApp Windowsuser joins themeeting asguest withoutentering thepassword, withthe linkreceived fromWebRTC user

Join themeeting asguest fromCMAWindowswithoutentering thepasscode


PassedCMA1 (Windows1) ->Meeting Server ->WebRTC(Chrome);CMA1 (Windows1) ->Meeting Server -> CMA2(Mac)

Verify whetherthe user canleave and rejointhe meeting byusing themanagementandpresentationscreen optionfrom theWebRTC client

Leave andrejoinmeeting viamanagementandpresentationscreen fromtheWebRTCclient


PassedCMA1 (Windows1) ->Meeting Server ->WebRTC(Chrome);CMA1 (Windows1) ->Meeting Server -> CMA2(Mac)

Verify whetherthe user is ableto refresh theongoingmeeting andreturn back tomeeting againwhen joined viamanagementandpresentationscreen optionfrom theWebRTC client

Send andreceive chatsduring themeetingjoined viamanagementandpresentationscreen fromtheWebRTCclient




PassedSX10 Quick Set (Mute &Unmute)-> Unified CM-> SIP Trunk -> MeetingServer

Verify whetherMute andUnmute isworking inCiscoTelePresenceSX10 QuickSet registeredwith CiscoUnifiedCommunicationsManager alsomeetinginitiated inCMASuccessfully

Mute orUnmuteparticipantaudio aftermeetinginitiated viaMeetingServer inSX10 QuickSetregistered inUnified CM


PassedWebRTC (Chrome) ,MX200 G2 and DX80 ->Unified CM -> SIP Trunk-> Meeting Server

Verify whetherMeeting isinitiated viaMeeting Serverin WebRTC(ChromeBrowser) withJapanese User ,CiscoTelePresenceMX200G2 andCiscoTelePresenceDX80registered inCisco UnifiedCommunicationsManagersuccessfully

InitiateMeeting viaMeetingServer inWebRTC(ChromeBrowser)withJapaneseUser ,MX200 G2and DX80registered inUnified CM


PassedNAVerify whetherIntelligentPairing isworking inCiscoTelePresenceMX200 G2registered inCisco UnifiedCommunicationsManagersuccessfully

CheckWhetherIntelligentPairing isworking inMX200 G2registered inUnified CM




PassedSX10 Quick Set(Presentation Sharing) ,MX200 G2 -> UnifiedCM -> SIP Trunk ->Meeting Server

Verify whetherMeetinginitiated viaMeeting ServerandPresentationSharing fromCiscoTelePresenceSX10 QuickSet to CiscoTelePresenceMX200 G2registered inCisco UnifiedCommunicationsManager afterCiscoTelePresenceSX10 QuickSet Paired withCMA usingIntelligentPairingsuccessfully

InitiateMeeting viaMeetingServer andPresentationSharing inSX10 QuickSetregistered inUnified CMafter SX10Quick SetPaired withCMA usingIntelligentPairing


PassedDX70 (PresentationSharing) , SX80 Codec ->Unified CM -> SIP Trunk-> Meeting Server

Verify whetherMeetinginitiated viaMeeting ServerandPresentationSharing fromCiscoTelePresenceDX70 to CiscoTelePresenceSX80 Codecregistered inCisco UnifiedCommunicationsManager afterCiscoTelePresenceDX70 Pairedwith CMAusingIntelligentPairingsuccessfully

InitiateMeeting viaMeetingServer andPresentationSharing inDX70registered inUnified CMafter DX70Paired withCMA usingIntelligentPairing




PassedSX20 Quick Set(Presentation Sharing) ,MX200 G2 and SX80Codec (PairedwithCMA)-> Unified CM -> SIPTrunk -> Meeting Server

Verify whetherMeetinginitiated viaMeeting ServerandPresentationSharing fromCiscoTelePresenceSX20 QuickSet to CiscoTelePresenceMX200G2 andCiscoTelePresenceSX80 Codecafter CiscoTelePresenceSX80 CodecPaired withCMA usingIntelligentPairing bothregistered inCisco UnifiedCommunicationsManagersuccessfully

InitiateMeeting viaMeetingServer andPresentationSharingfrom SX20Quick Set toMX200 G2after SX80CodecPaired withCMA usingIntelligentPairing bothregistered inUnified CM


PassedSX10 Quick Set(Presentation Sharing)and DX80 (Paired withCMA) -> Unified CM ->SIP Trunk -> MeetingServer

Verify whetherMeetinginitiated viaMeeting ServerandPresentationSharing inCiscoTelePresenceSX10 QuickSet after CiscoTelePresenceDX80 Pairedwith CMAusingIntelligentPairing bothregistered inCisco UnifiedCommunicationsManagersuccessfully

InitiateMeeting viaMeetingServer andPresentationSharing inSX10 QuickSet afterDX80Pairedwith CMAusingIntelligentPairing bothregistered inUnified CM




PassedSX20 Quick Set(Presentation Sharing)and SX80 Codec (Pairedwith CMA) -> UnifiedCM -> SIP Trunk ->Meeting Server

Verify whetherMeetinginitiated viaMeeting ServerandPresentationSharing fromCiscoTelePresenceSX20 QuickSet to CiscoTelePresenceSX80 Codecafter CiscoTelePresenceSX80 CodecPaired withCMA usingIntelligentPairing bothregistered inCisco UnifiedCommunicationsManagersuccessfully

InitiateMeeting viaMeetingServer andPresentationSharingfrom SX20Quick Set toSX80 Codecafter SX80CodecPaired withCMA usingIntelligentPairing bothregistered inUnified CM


PassedSX10 Quick Set , SX80Codec -> Unified CM ->SIP Trunk -> MeetingServer

Verify whetherEnhancedMeetingExperienceafter Meetinginitiated viaMeeting Serverin CiscoTelePresenceSX10 QuickSet and CiscoTelePresenceSX80 Codecregistered inCisco UnifiedCommunicationsManagerdisplayedsuccessfully

InitiateMeeting viaMeetingServer andCheckEnhancedMeetingExperiencein SX10Quick Setand SX80Codecregistered inUnified CM




PassedCMA(Hold andResume),MX200 G2 (Hold andResume) and SX20QuickSet (Hold and Resume) ->Unified CM -> SIP Trunk-> Meeting Server

Verify whetherHold andResume theMeeting afterinitiated viaMeeting Serverin CMA withJapanese User ,CiscoTelePresenceMX200G2 andCiscoTelePresenceSX20 QuickSet registeredin CiscoUnifiedCommunicationsManagersuccessfully

Hold andResumeafterInitiatingMeeting viaMeetingServer inCMA withJapaneseUser ,MX200 G2and SX20Quick Setregistered inUnified CM


PassedCMA , DX70(Presentation Sharing)and SX80 Codec ->Unified CM -> SIP Trunk-> Meeting Server

Verify whetherPresentationsharing inMeeting afterinitiated viaMeeting Serverin CMA withJapanese User ,CiscoTelePresenceDX70 andCiscoTelePresenceSX80 Codecregistered inCisco UnifiedCommunicationsManagersuccessfully

Presentationsharing inMeetingfrom DX70to SX80Codec afterInitiatingMeeting viaMeetingServer inCMA withJapaneseUser , DX70and SX80Codecregistered inUnified CM




PassedMX200 G2, MX300 G2,DX70 -> Unified CM ->Sip Trunk -> MeetingServer CMM ->Meetings

Verify whetherPin and Unpinbehavior inCisco MeetingManagementTool, initiatemeeting viaMeeting Serverin CiscoTelePresenceDX70, CiscoTelePresenceMX200 G2,CiscoTelePresenceMX300 G2 allregistered inCisco UnifiedCommunicationsManager

Checkwhether Pinand Unpinmeeting isworking inCMM



Verify whetheruser can able toSearch ActiveMeetings bymeeting title orowner in CiscoMeetingManagementTool managedby CiscoMeeting Serverinitiate meetingvia MeetingServer in CiscoTelePresenceDX80, CiscoTelePresenceMX200 G2,CiscoTelePresenceMX300 G2 allregistered inCisco UnifiedCommunicationsManager

SearchActiveMeetings bymeeting titleor owner inCMM




PassedNAVerify whetherthe logs aredeleted whenCisco MeetingManagementtool is restarted

Checkwhether thelogs aredeletedwhen CMMis restarted



Verify whetheruser can muteCiscoTelePresenceMX200 G2 inthe meetingalong withCiscoTelePresenceMX300 G2,CiscoTelePresenceDX70 allregistered inCisco UnifiedCommunicationsManagermanaged byCisco MeetingServer in CiscoMeetingManagementTool

MuteMX200 G2in themeetinginitiated viaCMS inCMM




PassedCisco TMS -> DX70,DX80, MX200 G2 ->Unified CM -> Sip Trunk-> Meeting Server CMM-> Meeting Server(Meeting Monitor)

Verify whetheruser canschedulemeeting inCiscoTelePresenceManagementSuite, initiatemeeting viaMeeting Serverin CiscoTelePresenceDX70, CiscoTelePresenceDX80, CiscoTelePresenceMX200 G2registered inCisco UnifiedCommunicationsManager andmonitor themeeting inCisco MeetingManagementTool

Schedule aconferencein TMS andmonitor themeeting inCMM


PassedCisco TMS -> DX70,DX80, MX300 G2 ->Unified CM -> Sip Trunk-> Meeting Server CMM-> MeetingServer(Meeting Monitor)

Verify whetheruser can addCiscoTelePresenceDX70, CiscoTelePresenceDX80, CiscoTelePresenceMX300 G2registered inCisco UnifiedCommunicationsManager inCiscoTelePresenceManagementSuite withJapanese username andcheck it isdisplayed inCisco MeetingManagementTool

Add anendpoint inTMS withJapaneseuser nameand Checkwhether it isdisplayed inCMM




PassedCisco TMS -> DX70,DX80, MX200 G2, ->Unified CM -> Sip Trunk-> Meeting Server CMM-> Meetings

Verify whetheruser canschedulemeeting inCiscoTelePresenceManagementSuite and Pinand Unpin themeeting inCisco MeetingManagementTool, initiatemeeting viaCisco MeetingServer in CiscoTelePresenceDX70, CiscoTelePresenceDX80, CiscoTelePresenceMX200 G2registered inCisco UnifiedCommunicationsManager

Checkwhether Pinand Unpinmeeting isworking inCMM whenconferenceis scheduledin TMS




PassedCisco TMS -> DX70,DX80, MX200 G2 ->Unified CM -> Sip Trunk-> Meeting Server CMM-> Meetings -> Mute ->DX70

Verify whetheruser can Muteand UnmuteCiscoTelePresenceDX70registered inCisco UnifiedCommunicationsManager fromthe scheduledMeeting inCiscoTelePresenceManagementSuite alongwith CiscoTelePresenceDX80, CiscoTelePresenceMX200 G2managed byCisco MeetingServer in CiscoMeetingManagementTool

Mute andUnmute inCMM afterinitiatingmeeting viaCMS inDX70




PassedCisco TMS -> DX70,DX80, MX200 G2 ->Unified CM -> Sip Trunk-> Meeting Server CMM-> Meetings

Verify whetheruser canschedulemeeting inCiscoTelePresenceManagementSuite andChange layoutfor CiscoTelePresenceDX70, CiscoTelePresenceDX80, CiscoTelePresenceMX200 G2 allregistered inCisco UnifiedCommunicationsManagermanaged byCisco MeetingServer in CiscoMeetingManagementTool

Changelayout of allparticipantin ascheduledconferencein CMM


PassedNAVerify whetheruser can viewthe details ofsecondaryCisco MeetingServer detailswhen primaryCisco MeetingServer is autodiscoveredCisco MeetingManagementTool

CheckwhethersecondaryCMS isauto-discoveredwhen addingprimaryCMS inCMM




PassedCisco TMS -> MX200G2,MX300G2, DX80 ->Unified CM -> Sip Trunk-> Meeting Server CMM-> Meetings

Verify whetheruser can ableschedulemeeting in inCiscoTelePresenceManagementSuite to SearchActiveMeetings byIndividualParticipant inCisco MeetingManagementTool managedby CiscoMeetingServer,scheduleconference inCiscoTelePresenceDX80, CiscoTelePresenceMX200 G2,CiscoTelePresenceMX300 G2 allregistered inCisco UnifiedCommunicationsManager

SearchActiveMeetings byIndividualParticipantafterconferenceis scheduledin TMS




PassedSX10 Quick Set, MX300G2, DX70, Spark RoomKit(Unregistered) ->H323->CMS

Verify whetherH323 Meetingis initiated viaCisco MeetingServer bydialing IPAddress inUnregisteredCiscoTelePresenceSX10 QuickSet ,CiscoTelePresenceMX300 G2 ,CiscoTelePresenceDX70 andCisco CiscoWebex RoomKit

Initiate aH323Meeting viaMeetingServer bydialing IPAddress inUnregisteredSX10 QuickSet , MX300G2 , DX70and CiscoWebexRoom Kit


PassedSX80 Codec ,CiscoWebex Room KitPlus,SX20 Quick Set(Unregistered) ->H323->CMS

Verify whetherH323 Meetingis initiatedsuccessfully viaCisco MeetingServer bydialing an<space _uri>@IP addressin UnregisteredCiscoTelePresenceSX80 Codec ,Cisco CiscoWebex RoomKitPlus andCiscoTelePresenceSX20 QuickSet

Initiate aH323Meeting viaMeetingServer bydialing an<space _uri>@IPaddress inUnregisteredSX80 Codec,CiscoWebexRoomKitPlus andSX20 QuickSet




PassedSpark Room Kit, DX80,MX300 G2(Unregistered)->H323->CMS->Hold/Resume

Verify whetheruser is able toHold andResume theH323 Meetingvia CiscoMeeting Serverby dialing an IPAddress inUnregisteredCisco CiscoWebex RoomKit, CiscoTelePresenceDX80 andCiscoTelePresenceMX300 G2

Hold andResume theH323Meeting viaMeetingServer bydialing an IPAddress inUnregisteredCiscoWebexRoom Kit,DX80 andMX300 G2


PassedCisco Webex RoomKit,DX70, SX20 QuickSet (Unregistered)->H323 ->CMS->Hold/Resume

Verify whetheruser is able toHold andResume inH323 Meetingvia CiscoMeeting Serverby dialing an<space_uri>@IP addressin UnregisteredCisco CiscoWebex RoomKit, CiscoTelePresenceDX70 andCiscoTelePresenceSX20 QuickSet

Hold andResumeH323Meeting viaMeetingServer bydialing an<space _uri>@IPaddress inUnregisteredCiscoWebexRoom Kit,DX70 andSX20 QuickSet




PassedCisco Webex RoomKitPlus , DX70(Unregistered)->CMS

Verify whetherDial ToneMultiFrequencysupport isavailable inUnregisteredCisco CiscoWebex RoomKitPlus andCiscoTelePresenceDX70 wheninitiating aH323 meetingvia CiscoMeeting ServerworksSuccessfully

Check theDTMFkeypadsupport inUnregisteredCiscoWebexRoomKitPlus andDX70 wheninitiating aH323meeting viaMeetingServer


PassedSX20 Quick Set andDX70(Unregistered)->H323 ->Meeting Server ->Sharethe Presentation

Verify whetheruser is able toShare thePresentation inH323 Meetingin CiscoTelePresenceSX20 QuickSet ,CiscoTelePresenceSX80 Codec,CiscoTelePresenceSX10 QuickSet, and CiscoTelePresenceDX80 which isin Unregisteredstate aftersetting call rateas 3072 Kbpsin all endpoints

Share aPresentationin H323Meeting inSX20 QuickSet, SX80Codec,SX10 QuickSet andDX80whichis inUnregisteredstate aftersetting callrate as 3072Kbps




PassedSX10 Quick Set , SX80and DX80(Unregistered)->H323 ->Meeting Server

Verify whetherLong DurationH323 Meetingis initiated inCiscoTelePresenceSX10 QuickSet , CiscoTelePresenceSX80 Codecand CiscoTelePresenceDX80 which isin Unregisteredstate aftersetting call rateas 3072 Kbpsin all endpoints

Initiate aLongDurationH323Meeting inSX10 QuickSet , SX80Codec andDX80whichis inUnregisteredstate aftersetting callrate as 3072Kbps


PassedSX80 Codec , MX300G2, SX10 Quick Set(Unregistered) ->H323->CMS ->SharePresentation

Verify whetheruser is able toShare thePresentation inH323 Meetingvia CiscoMeeting Serverby dialing an IPAddress inUnregisteredCiscoTelePresenceSX10 QuickSet, CiscoTelePresenceMX200 G2,CiscoTelePresenceSX80 Codec

Share thePresentationin H323Meeting viaMeetingServer bydialing an IPAddress inUnregisteredSX10 QuickSet, MX200G2, SX80Codec




PassedCisco Webex RoomKit,DX70, SX20 QuickSet (Unregistered)->H323 ->CMS->Hold/Resume

Verify whetheruser is able toHold andResume inH323 Meetingvia CiscoMeeting Serverby dialing an<space_uri>@IP addressin UnregisteredCisco CiscoWebex RoomKit, CiscoTelePresenceDX70 andCiscoTelePresenceSX20 QuickSet

Share thePresentationH323Meeting viaMeetingServer bydialing an<space _uri>@IPaddress inUnregisteredCiscoWebexRoom Kit,DX70 andSX20 QuickSet


PassedSKFBClient onWindows-> SKFB Server->Trusted SipTrunk->CMSCisco CiscoWebex Room Kitplus &SX10 Quick Set->Unified CM->SipTrunk->CMS

Verify if user isable to Joinvideoconference callat 384 kbpsbetween Skypefor businessclient onwindows ,SX10 QuickSet and CiscoWebex RoomKitplus usingmeeting serverhosted meetingSuccessfully

Join videoconferencecall at 384kbpsbetweenSkype forbusinessclient onwindows ,SX10 QuickSet andCiscoWebexRoomKitplususingmeetingserverhostedmeeting




PassedSKFB Client on Android-> SKFB Server->Trusted SipTrunk->CMSCMA onIOS -> CMS Cisco Sparkroom kit->UnifiedCM->Sip Trunk->CMS

Verify if user isable to do longduration videoconference callbetween Skypefor businessclient onAndroid , CMAuser on IOSand CiscoWebex RoomKitusingMeeting serverhosted meetingSuccessfully

Longdurationvideoconferencecall betweenSkype forbusinessclient onAndroid ,CMAJapaneseuser on IOSand CiscoWebexRoomKitusingMeetingserverhostedmeeting


PassedSKFBClient onWindows-> SKFB Server->Trusted Sip Trunk->CMSCisco Spark roomkit->Cisco VCS->CMSCMA onWindows-> CMS

Verify if user isable to contentsharing invideoconference callbetween Skypefor businessclient onwindows ,CMA user onWindows andCisco WebexRoomKitusingMeeting serverhosted meetingSuccessfully

Contentsharing invideoconferencecall betweenSkype forbusinessclient onwindows ,CMA useron Windowsand CiscoWebexRoomKitusingMeetingserverhostedmeeting




PassedSKFBClient onWindows-> SKFB Server->Trusted Sip Trunk->CMSCiscoCiscoWebexRoomKitplus-> UnifiedCM->SipTrunk->CMSCMA onMAC->CMS

Verify if user isable to muteAudio/Videooptions duringvideoconference callbetween Skypefor businessclient onwindows ,CMA on Macand CiscoWebex RoomKitplus usingMeeting serverhosted meetingSuccessfully

CheckingAudio/Videomute controlduring videoconferencecall betweenSkype forbusinessclient onwindows ,CMA onMac andCiscoWebexRoomKitplususingMeetingserverhostedmeeting


PassedSKFBClient onWindows-> SKFB Server->Trusted Sip Trunk->CMSCiscoWebex RoomKit&SX10 Quick Set(EMuser)->Unified CM->SipTrunk->CMS

Verify if user isable to dovideoconference callbetween Skypefor businessclient onandroid ,CiscoWebex RoomKit& SX10Quick Set (EMuser) usingMeeting serverhosted meetingSuccessfully

Videoconferencecall betweenSkype forbusinessclient onandroid,CiscoWebexRoom Kit&SX10 QuickSet (EMuser) usingMeetingserverhostedmeeting




PassedSKFB Client on iOS ->SKFB Server-> TrustedSip Trunk->CMS CiscoWebex Room Kitplus ,SX20 Quick Set ->Unified CM->SipTrunk->CMS

Verify if user isable to sharingpresentation invideoconference callbetween Skypefor businessclient on iOS,SX20 QuickSet & CiscoWebex RoomKitplus at callrate 2560 kbpsusing Meetingserver hostedmeetingSuccessfully

Presentationsharing invideoconferencecall betweenSkype forbusinessclient on iOS,SX20QuickSet & CiscoWebexRoomKitplus atcall rate2560 kbpsusingMeetingserverhostedmeeting


PassedSKFBClient onWindows-> SKFB Server->Trusted Sip Trunk->CMSSpark room kit->UnifiedCM->SipTrunk->CMSCMA onIOS->CMS

Verify if user isable to recordvideoconference callbetween Skypefor businessclient onwindows ,CMA on IOSand CiscoCisco WebexRoomKitusingmeeting serverhosted meetingSuccessfully

Recordingvideoconferencecall betweenSkype forbusinessclient onwindows ,CMA onIOS andCiscoWebexRoomKitusingMeetingserverhostedmeeting




PassedSKFBClient onWindows-> SKFB Server->Trusted Sip Trunk->CMSCisco Webex RoomKitplus->UnifiedCM->SipTrunk->CMSCMA onWindows->CMS

Verify if user isable to recordlong videoconference callbetween Skypefor businessclient onwindows ,CMA onWindows andCisco WebexRoom Kitpluswith EM Userusing Meetingserver hostedmeeting

RecordingLongDurationvideoconferencecall betweenSkype forbusinessclient onwindows ,CMA onWindowsand CiscoWebexRoomKitplus withEM UserusingMeetingserverhostedmeeting


PassedSKFB Client onandroid-> SKFBServer->Trusted Sip Trunk->CMSCiscoWebex RoomKit&SX80 Codec->UnifiedCM->Sip Trunk->CMS

Verify if user isable to sharingcontentwirelessly invideoconference callbetween skypefor business onandroid , CiscoWebex RoomKit& SX80Codec usingCisco MeetingServer HostedMeetingSuccessfully

Wirelesssharing invideoconferencecall betweenskype forbusiness onandroid ,CiscoWebexRoom Kit&SX80 Codecusing CiscoMeetingServerHostedMeeting




PassedSKFBClient on iPhone->SKFB Server-> TrustedSip Trunk->CMS CiscoWebex Room Kitplus &SX10Quick Set->UnifiedCM->Sip Trunk->CMS

Verify if user isable to sharingcontentwirelessly invideoconference callbetween skypefor business oniPhone ,CiscoWebex RoomKitplus &SX10 QuickSet both aresignedwith EMuser usingCisco MeetingServer HostedMeetingSuccessfully

Wirelesssharing invideoconferencecall betweenskype forbusiness oniPhone,CiscoWebexRoomKitplus &SX10 QuickSet both aresigned inwith EMuser usingCiscoMeetingServerHostedMeeting


PassedSX10Quick Set A , SX10Quick Set B and SX10Quick Set C -> UnifiedCM -> SIP Trunk ->Meeting Server ; CMM(Mute / Unmute)->CMS-> Meeting

Verify whetherMute andUnmute isworking inCMM for threeCiscoTelePresenceSX10 QuickSet participantsregistered inCisco UnifiedCommunicationsManagersuccessfully

InitiateMeeting viaMeetingServer inthree SX10Quick Setregistered inUnified CMand ClickMute andUnmuteoption isdisplayed inCMM




PassedMX200 G2 A , MX200G2 B and CMA(Windows) -> UnifiedCM -> SIP Trunk ->Meeting Server ; CMM(Mute / Unmute) -> CMS-> Meeting

Verify whetherMute andUnmute isworking inCMM for twoCiscoTelePresenceMX200 G2participantsregistered inCisco UnifiedCommunicationsManager andCMA(Windows)successfully

InitiateMeeting viaMeetingServer inCMA(Windows)and twoMX200 G2registered inUnified CMand ClickMute andUnmuteoption isdisplayed inCMM


PassedMX200 G2 ,DX70,MX300G2 ->UnifiedCM-> Sip Trunk ->CMSCMM -> CMS ->Meeting

Verify whetheruser can muteall theparticipants ina meeting inCisco MeetingManagementTool managedby CiscoMeetingServer, initiatea conferencewith CiscoTelePresenceMX200 G2,CiscoTelePresenceDX70, CiscoTelePresenceMX300 G2 allregistered inCisco UnifiedCommunications

Mute all theparticipantsin a meetingin CMMwhileinitiatingCMSconference




PassedDX80 ,DX70,MX300G2-> Unified CM -> SipTrunk -> CMSCMM ->CMS -> Meeting

Verify whetheruser can mutethe participantswhich isentering theongoingmeeting inCisco MeetingManagementTool managedby CiscoMeetingServer, initiatea conferencewith CiscoTelePresenceDX80, CiscoTelePresenceDX70, CiscoTelePresenceMX300 G2 allregistered inCisco UnifiedCommunications

Mute theparticipantswhich isentering theongoingmeeting inCMM whileinitiatingCMSconference


PassedDX80 ,DX70,MX300G2->Unified CM -> SipTrunk -> CMSCMM ->CMS -> Meeting

Verify whetheruser can viewthe Mute Allicon in CiscoMeetingManagementTool managedby CiscoMeetingServer, initiatea conferencewith CiscoTelePresenceDX80, CiscoTelePresenceDX70, CiscoTelePresenceMX300 G2 allregistered inCisco UnifiedCommunications

Check forthe Mute Allicon inCMM whileinitiatingCMSconference




PassedDX80 ,DX70,MX300G2->Unified CM -> SipTrunk -> CMSCMM ->CMS -> Meeting

Verify whetheruser can viewthe Mute onEntry icon inCisco MeetingManagementTool managedby CiscoMeetingServer, initiatea conferencewith CiscoTelePresenceDX80, CiscoTelePresenceDX70, CiscoTelePresenceMX300 G2 allregistered inCisco UnifiedCommunications

Check forthe Mute onEntry icon inCMM whileinitiatingCMSconference


PassedDX70, DX80, SX10Quick Set -> Unified CM-> Sip Trunk -> MeetingServer CMM -> CMS ->Meetings -> CMAParticipant(Mute onEntry)

Verify whetheruser can initiatea conferencewith CiscoTelePresenceDX70, CiscoTelePresenceDX80, CiscoTelePresenceSX10 QuickSet registeredin CiscoUnifiedCommunicationsManager andmute the CMAParticipantwhich isentering theongoingmeeting inCisco MeetingManagementTool managedby CiscoMeeting Server

CheckwhetherCMAparticipantcan beMuted onEntry inCMM




PassedSKFB Client on Android-> SKFB Server->Trusted SipTrunk->CMSCMAApp(iOS),WebRTC(Chrome)->CMS

Verify if user isable to joinmeetingbetween Skypefor Businessclient onAndroid, CiscoMeeting Appuser on iOSand WebRTCon Chromeusing CiscoMeeting Serverhostedconference

Join meetingbetweenSkype forbusinessclient onAndroid,CiscoMeetingApp user oniOS andWebRTC onChromeusing CMSHostedconference


PassedSKFB Client on Android-> SKFB Server->Trusted SipTrunk->CMSCMAApp(iOS),WebRTC(Chrome)->CMS

Verify if user isable to stay for30 mins invideoconference callbetween Skypefor Businessclient onAndroid, CiscoMeeting Appuser on iOSand WebRTCon Chromeusing CiscoMeeting Serverhostedconference

LongdurationVideoconferencecall betweenSkype forbusinessclient onAndroid,CiscoMeetingApp user oniOS andWebRTC onChromeusing CMSHostedconference




PassedSKFB Client on Android-> SKFB Server->Trusted Sip Trunk->CMSCMA webrtc(Android),WebRTC(Chrome) ->CMS

Verify if user isable to muteaudio/videoduring videoconference callbetween Skypefor Businessclient onAndroid , Ciscomeeting webrtcuser onAndroid andWebRTC onChrome usingMeeting serverhosted meetingSuccessfully

CheckingAudio/Videomute controlduring videoconferencecall betweenSkype forbusinessclient onAndroid ,Ciscomeetingwebrtc useron AndroidandWebRTC onChromeusingMeetingserverhostedmeeting


PassedSKFB Client on Android-> SKFB Server->Trusted SipTrunk->CMSCMAApp(iOS),WebRTC(Chrome)->CMSDX80->Unified CM->SipTrunk->CMS

Verify if user isable to doencryptionvideo callbetween skypefor businessclient onAndroid, CiscoMeeting Appuser on iOS ,CiscoTelepresenceDX80 andWebRTC onChrome usingCMS hostedconference

Encryptionvideoconferencecall betweenSkype forbusinessclient onAndroid,CiscoMeetingApp user oniOS , DX80andWebRTC onChromeusing CMSHostedconference




PassedSKFB Client on Android-> SKFB Server->Trusted SipTrunk->CMSCMAApp(iOS),WebRTC(Chrome)->CMSDX80->Unified CM->SipTrunk->CMS

Verify if user isable to doencryptionvideo callbetween skypefor businessclient onAndroid, CiscoMeeting Appuser on iOS ,CiscoTelepresenceDX80 andWebRTC onChrome usingCMS hostedconference andend the callafter 30 mins

LongdurationEncryptionvideoconferencecall betweenSkype forbusinessclient onAndroid,CiscoMeetingApp user oniOS , DX80andWebRTC onChromeusing CMSHostedconference



Verify whetherthe WebRTCclients/ CiscoMeeting App isable to start andstop thepresentationwhile mutingthe call

Start andstop thepresentationbetweenCMA/WebRTCclients whilemuting themeeting



Verify whetherthe space namecan be editedduring themeeting inWebRTCclients/ CiscoMeeting App

Editing thespace nameduring themeeting inCMA/WebRTCclients


PassedNAVerify whetheruser is unableto login toCMA installedin iPhone withwrong usercredentials

Checkwhether useris unable tologin toCMAinstalled iniPhone withwrongcredentials




PassedNAVerify whetheruser is unableto login toCMA installedin Windowswith wronguser credentials

Checkwhether useris unable tologin toCMAinstalled inWindowswith wrongcredentials



Verify whethervideo is notshared fromCMA(iPhone)in a call withCMAWebRTCclient aftervideo sharing isstopped fromCMA iPhone

Stop videofrom CMAinstalled iniPhone andmake call toCMAWebRTCclient andcheckwhethervideo is notshared



Verify whetheraudio is notshared fromCMA(iPhone)in a call withCMAWebRTCclient aftermuting fromCMA iPhone

Mute Audiofrom CMAinstalled iniPhone andmake call toCMAWebRTCclient andcheckwhethervideo is notshared


PassedCMAWebRTC ->Meeting Server -> CMA(iPhone) (Decline)

Verify whetherincoming callcan be declinedfrom CMA(iPhone) whenit receives callfrom CMAWebRTC

Decline thecall fromCMAinstalled iniPhone




PassedSX10 Quick Set ->Unified CM -> Sip Trunk-> Meeting Server

Verify whetherHold in CiscoTelePresenceSX10 QuickSet Touch 10and Resume inCiscoTelePresenceSX10 QuickSet in Web UIregistered inCisco UnifiedCommunicationsManagerSuccessfully

Hold inSX10 QuickSet Touch10 andResume inSX10 QuickSet Web UIregistered inUnified CM


PassedFive Video Endpoints(Hold and Resume)(Presentation Sharing) ->Unified CM -> Sip Trunk-> Meeting Server

Verify whetherHold &Resume andPresentation isshared in allfive endpointsin CMSMeeting isinitiated viaMeeting Serversuccessfully

Hold &Resume andPresentationSharing inCMSMeeting isinitiated viaMeetingServer inFiveEndpoints


PassedNAVerify whetheruser is unableto login toCMA installedin MAC withinvalidusername

Checkwhether useris unable tologin toCMAinstalled inMAC withinvalidusername


PassedCMAWebRTC ->Meeting Server -> CMA(MAC), CMAWebRTC->Add ->Meeting Server-> CMAWindows

Verify whetheradding CMAinstalled inMAC user tothe callbetween CMAWebRTC andCMA installedin MAC withinvalidusername

AddParticipantfrom CMAWebRTCwhile in acall withCMA inMAC withinvalidusername




PassedNAVerify whetheruser is unableto open CMAin MACwithoutproviding DNS

CheckwhetherCMA is notopening inMACwithoutprovidingDNS details


PassedWebRTC1(Chrome) ->Meeting Server ->WebRTC2(ChromeAndroid)

Verify whetherthe Sipresponse shownwhen addingthe otherparticipant intothe meetingcarried byCisco MeetingApp/WebRTCclient

CollectingSip tracewheninviting theotherparticipantsduring themeeting


PassedNAVerify whetherthe Sipresponse shownwhen deletinga space fromCisco MeetingApp/WebRTCclient

CollectingSip tracewhendeleting aspace fromMeetingApp/WebRTCclient


PassedCMAWebRTC ->Meeting Server -> CMA(iPhone)

Verify whethersip messagescan be viewedfrom the logsgenerated fromthe callbetween CMAWebRTC andCMA installedin iPhone

Call betweenCMAWebRTCand CMA iniPhone andcheck the sipmessages inthe logsgenerated


PassedCMAWebRTC(Mute) ->Meeting Server -> CMA(iPhone)

Verify whethersip messagescan be viewedfrom the logsgenerated formuting the callbetween CMAWebRTC andCMA installedin iPhone

Mute fromCMAWebRTCwhile in acall withCMA iniPhone andcheck the sipmessages inthe logsgenerated




PassedCMAWebRTC ->Meeting Server -> CMA(iPhone)CMAWebRTC->Add ->Meeting Server-> CMAWindows

Verify whethersip messagescan be viewedfrom the logsgenerated foradding CMAinstalled inWindows userto the callbetween CMAWebRTC andCMA installedin iPhone

AddParticipantfrom CMAWebRTCwhile in acall withCMA iniPhone andcheck the sipmessages inthe logsgenerated


PassedCMAWebRTC ->Meeting Server -> CMA(iPhone)(Decline)

Verify whethersip messagescan be viewedfrom the logsgenerated fordeclining thecall from CMAinstalled iniPhone whilereceiving callfrom CMAWebRTC

Decline thecall fromCMA iniPhone andcheck the sipmessages inthe logsgenerated


PassedCMAWebRTC (ShareScreen) -> MeetingServer -> CMA (iPhone)

Verify whethersip messagescan be viewedfrom the logsgenerated forscreen sharingfrom CMAWebRTC in acall with CMAinstalled iniPhone

Share screenfrom CMAWebRTCwhile in acall withCMA iniPhone andcheck the sipmessages inthe logsgenerated




PassedCMA (Mac ) andMX200G2 -> Unified CM -> SipTrunk -> Meeting Server

Verify whetheruser is able toMute orUnmuteparticipantaudio in theMeetinginitiated viaMeeting Serverin CMA inMacand CiscoTelePresenceMX200 G2registered inCisco UnifiedCommunicationsManagersuccessfully

Mute orUnmuteparticipantaudio aftermeetinginitiated viaMeetingServer inMX200 G2registered inUnified CM


PassedCMA (Android) ,MX300G2 and DX80 -> UnifiedCM -> Sip Trunk ->Meeting Server

Verify whetherMeeting isinitiated viaMeeting Serverwith JapaneseUser in CMA(Android)WebRTC andCiscoTelePresenceMX300G2 andCiscoTelePresenceDX80registered inCisco UnifiedCommunicationsManagersuccessfully

InitiateMeeting viaMeetingServer withJapaneseUser inCMA(Android)WebRTC ,MX300 G2and DX80registered inUnified CM




PassedCMA (iPad) ,SX10QuickSet (Hold and Resume)and SX20 Quick Set ->Unified CM -> Sip Trunk-> Meeting Server

Verify whetherHold andResume theMeetinginitiated viaMeeting Serverwith JapaneseUser in CMA(iPad), CiscoTelePresenceSX10 QuickSet and CiscoTelePresenceSX20 QuickSet bothregistered inCisco UnifiedCommunicationsManagersuccessfully

Hold andResume theMeetinginitiated viaMeetingServer inSX10 QuickSet, SX20Quick SetwithJapaneseUser inCMA (iPad)


PassedCMA(Android)WebRTCandDX80 ->Unified CM-> Sip Trunk -> MeetingServer DX80 -> Transfer-> Unified CM -> SX80Codec

Verify whetherInitiateMeeting viaMeeting Serverin CiscoTelePresenceDX80 withJapanese Userin CMA(Android)WebRTC andtransfer themeeting fromCiscoTelePresenceDX80 to CiscoTelePresenceSX80 Codecregistered inCisco UnifiedCommunicationsManagersuccessfully

InitiateMeeting viaMeetingServer inDX80 withJapaneseUser inCMA(Android)WebRTCand transferthe meetingfrom DX80to SX80Codec




PassedDX70, DX80 , MX200G2 -> Unified CM -> SipTrunk -> Meeting Server

Verify whetheruser is able topresent thecontent to theremoteparticipantsfrom CMS inCiscoTelePresenceDX70 , CiscoTelePresenceDX80 , CiscoTelePresenceMX200 G2registered inCisco UnifiedCommunicationsManagersuccessfully

PresentationSharing toremoteparticipantsin CMS


PassedCisco TMS -> SX10Quick Set ,SX20 QuickSet,MX300G2 ->UnifiedCM -> CMSCMM ->CMS -> Meeting

Verify whetheruser canSchedule aconferencewith CiscoTelePresenceSX10 QuickSet, CiscoTelePresenceSX20 QuickSet, CiscoTelePresenceMX300 G2registered inCisco UnifiedCommunicationsManager inCiscoTelePresenceManagementSuite and muteall theparticipants inCisco MeetingManagementTool

Schedule aconferencein TMS andmute all theparticipantsin CMM




PassedCisco TMS -> SX10Quick Set ,SX20 QuickSet,MX300G2 ->UnifiedCM -> CMSCMM ->CMS -> Meeting

Verify whetheruser canSchedule aconferencewith CiscoTelePresenceSX10 QuickSet, CiscoTelePresenceSX20 QuickSet, CiscoTelePresenceMX300 G2registered inCisco UnifiedCommunicationsManager inCiscoTelePresenceManagementSuite withJapanese nameand mute allthe participantsin CiscoMeetingManagementTool

Schedule aconferencewithJapanesename inTMS andmute all theparticipantsin CMM




PassedCisco TMS -> SX10Quick Set ,SX20 QuickSet,MX300G2 ->UnifiedCM -> CMS. CMM ->CMS -> Meeting

Verify whetheruser canSchedule aconferencewith CiscoTelePresenceSX10 QuickSet, CiscoTelePresenceSX20 QuickSet, CiscoTelePresenceMX300 G2registered inCisco UnifiedCommunicationsManager inCiscoTelePresenceManagementSuite and viewthe meetingsthat was endedin last 7 days inCisco MeetingManagementTool

Schedule aconferencein TMS andcheckwhetherCMMdisplaysmeetingsthat wasended in last7 days

CMS2.4FCS.CMS.G.001



PassedCisco TMS -> DX80,DX70, MX200 G2->Unified CM -> SipTrunk –> CMS. CMM ->CMS -> Meeting

Verify whetheruser canSchedule aconferencewith CiscoWebex DX80,CiscoTelePresenceDX70, CiscoTelePresenceMX200 G2registered inCisco UnifiedCommunicationsManager inCiscoTelePresenceManagementSuite and viewall the meetinglevel controlsare placedabove theparticipant listin CiscoMeetingManagementTool

Schedule aconferencein TMS andcheckwhether allthe meetinglevelcontrols areplaced abovetheparticipantlist in ameeting inCMM

CMS2.4FCS.CMS.G.002



PassedSX80Codec,MX300G2,MX200 G2 -> UnifiedCM -> Sip Trunk ->Meeting Server CMM ->CMS -> Meeting

Verify whetheruser canSchedule aconferencewith CiscoTelePresenceSX80 Codec,CiscoTelePresenceMX200 G2,CiscoTelePresenceMX300 G2registered inCisco UnifiedCommunicationsManager inCiscoTelePresenceManagementSuite and filterall theimportantparticipantswhen login asVideo Operatorin CiscoMeetingManagementTool

Schedule aconferencein TMS andcheckwhether alltheimportantparticipantcan befiltered inCMM whenlogged in asVideoOperator

CMS2.4FCS.CMS.G.003




Verify whetheruser canSchedule aconferencewith CiscoWebex DX80,CiscoTelePresenceDX70, CiscoTelePresenceMX300 G2registered inCisco UnifiedCommunicationsManager inCiscoTelePresenceManagementSuite and viewthe importancemarked in allthe participantsis cleared inCisco MeetingManagementTool

Schedule aconferencein TMS andcheckwhetherimportancemarked in allparticipantsis cleared inCMM

CMS2.4FCS.CMS.G.004




Verify whetheruser canSchedule aconferencewith CiscoWebex DX80,CiscoTelePresenceDX70, CiscoTelePresenceMX300 G2registered inCisco UnifiedCommunicationsManager inCiscoTelePresenceManagementSuite and clearall the selectedfilters in ameeting inCisco MeetingManagementTool

Schedule aconferencein TMS andcheckwhetherClear Filterfilters all theselectedfilters in ameeting

CMS2.4FCS.CMS.G.005



PassedCisco TMS -> SX10Quick Set, SX20 QuickSet,MX300G2->UnifiedCM -> Sip Trunk -> CMSCMM -> CMS ->Meeting(Unmuteselected)

Verify whetheruser canSchedule aconferencewith CiscoTelePresenceSX10 QuickSet, CiscoTelePresenceSX20 QuickSet, CiscoTelePresenceMX300 G2registered inCisco UnifiedCommunicationsManager inCiscoTelePresenceManagementSuite andUnmute theselectedparticipantswhen login asVideo Operatorin CiscoMeetingManagementTool

Schedule aconferencein TMS andUnmute theselectedparticipantsin a meetingin CMMwhen loggedin as VideoOperator

CMS2.4FCS.CMS.G.006



PassedCisco TMS -> DX70,SX10 Quick Set, MX200G2 -> Unified CM -> SipTrunk -> CMS CMM ->CMS ->Meeting(UnmuteAll)

Verify whetheruser canSchedule aconferencewith CiscoTelePresenceDX70, CiscoTelePresenceSX10 QuickSet, CiscoTelePresenceMX200 G2registered inCisco UnifiedCommunicationsManager inCiscoTelePresenceManagementSuite withJapanese nameand Unmute allthe participantswhen login asVideo Operatorin CiscoMeetingManagementTool

Schedule aconferencewithJapanesename inTMS andUnmute alltheparticipantsin CMMwhen loggedin as VideoOperator

CMS2.4FCS.CMS.G.007



PassedCisco TMS -> DX80,SX20 Quick Set, MX300G2 -> Unified CM -> SipTrunk -> CMS CMM ->CMS ->Meeting(Mute onEntry)

Verify whetheruser canSchedule aconferencewith CiscoWebex DX80,CiscoTelePresenceSX20 QuickSet, CiscoTelePresenceMX300 G2registered inCisco UnifiedCommunicationsManager inCiscoTelePresenceManagementSuite withJapanese nameand Mute theparticipantwhich isentering theongoingmeeting whenlogin as VideoOperator inCisco MeetingManagementTool

Schedule aconferencewithJapanesename inTMS andMute theparticipantwhich isentering theongoingmeeting inCMM whenlogged in asVideoOperator

CMS2.4FCS.CMS.G.008



PassedCisco TMS -> DX80,SX80 Codec, MX200 G2-> Unified CM -> SipTrunk -> CMS CMM ->CMS ->Meeting(Changelayout)

Verify whetheruser canSchedule aconferencewith CiscoWebex DX80,CiscoTelePresenceSX80 Codec,CiscoTelePresenceMX200 G2registered inCisco UnifiedCommunicationsManager inCiscoTelePresenceManagementSuite withJapanese nameand change thelayout for theselectedparticipants inameetingwhenlogin as VideoOperator inCisco MeetingManagementTool

Schedule aconferencewithJapanesename inTMS andchange thelayout forthe selectedparticipantsin a meetingin CMMwhen loggedin as VideoOperator

CMS2.4FCS.CMS.G.009



PassedCisco TMS -> SX10Quick Set, DX70, CiscoWebex Room Kit->Unified CM -> SipTrunk –> CMS CMM ->CMS -> Meeting

Verify whetheruser canSchedule aconferencewith CiscoTelePresenceCisco WebexRoom Kit,CiscoTelePresenceDX70, CiscoTelePresenceSX10 QuickSet registeredin CiscoUnifiedCommunicationsManager inCiscoTelePresenceManagementSuite and filterthe connectedparticipants inCisco MeetingManagementTool

Schedule aconferencein TMS andfilter theconnectedparticipantsin CMM

CMS2.4FCS.CMS.G.010



PassedSX80 Codec, DX70,MX300 G2 -> UnifiedCM -> Sip Trunk -> CMSCMM -> CMS ->Meeting

Verify whetheruser can viewall the meetinglevel controlsabove theparticipant listin CiscoMeetingManagementTool managedby CiscoMeetingServer, initiatea conferencewith CiscoTelePresenceSX80 Codec,CiscoTelePresenceDX70, CiscoTelePresenceMX300 G2 allregistered inCisco UnifiedCommunicationsManager

Checkwhether allthe meetinglevelcontrols areplaced abovetheparticipantlist in ameeting inCMM whileinitiatingCMSconference

CMS2.4FCS.CMS.G.011



PassedSX10 Quick Set, DX70,MX300 G2 -> UnifiedCM -> Sip Trunk -> CMSCMM -> CMS ->Meeting

Verify whetheruser can viewall the meetinglevel controlsabove theparticipant listin CiscoMeetingManagementTool whenlogged in asVideo Operatormanaged byCisco MeetingServer, initiatea conferencewith CiscoTelePresenceSX10 QuickSet, CiscoTelePresenceDX70, CiscoTelePresenceMX300 G2 allregistered inCisco UnifiedCommunicationsManager

Checkwhether allthe meetinglevelcontrols areplaced abovetheparticipantlist in ameeting inCMM whenlogged in asVideoOperatorwhileinitiatingCMSconference

CMS2.4FCS.CMS.G.012

PassedNAVerify whetheruser can viewthe NTPautomaticallyconfigured inCisco MeetingManagementTool afterinstallation

CheckwhetherNTP isconfiguredautomaticallyafterinstallation

CMS2.4FCS.CMS.G.013

PassedNAVerify whetherself-signedcertificate isauto generatedin CiscoMeetingManagementTool afterinstallation

Checkwhetherself-signedcertificate isautogeneratedafterinstallation

CMS2.4FCS.CMS.G.014



PassedNAVerify whetheruser canconfigure theLDAP, NTP ofCisco MeetingServer in CiscoMeetingManagementTool.

Checkwhether theLDAP, NTPconfigurationin CMS cannow beconfiguredvia CMM

CMS2.4FCS.CMS.G.015

PassedDX70, DX80, SX10Quick Set, MX300 G2,MX200 G2, SX20 QuickSet, SX80 Codec ->Unified CM -> Sip Trunk-> Meeting Server CMM-> CMS -> Meeting

Verify whetheruser can initiatea conferencewith CiscoTelePresenceDX70, CiscoWebex DX80,CiscoTelePresenceSX10 QuickSet, CiscoTelePresenceMX200 G2,CiscoTelePresenceMX300 G2,CiscoTelePresenceSX20 QuickSet, CiscoTelePresenceSX80 Codecand 4 CMAParticipantsregistered inCisco UnifiedCommunicationsManager, selectall theparticipants andtry to mute theselectedparticipants inCisco MeetingManagementTool managedby CiscoMeeting Server

Checkwhethermore than 10Participantscan beselected andtry to mutethe selectedparticipantsin CMMwhileinitiatingCMSconference

CMS2.4FCS.CMS.G.016



PassedMX200 G2, MX300 G2,DX80 -> Unified CM ->Sip Trunk -> MeetingServer CMM -> CMS ->Meeting

Verify whetheruser can able toclear all theselected filtersin CiscoMeetingManagementTool managedby CiscoMeetingServer, initiateconference inCisco WebexDX80, CiscoTelePresenceMX200 G2,CiscoTelePresenceMX300 G2 allregistered inCisco UnifiedCommunicationsManager

CheckwhetherClear Filterfilters all theselectedfilters in ameeting inCMM

CMS2.4FCS.CMS.G.017

PassedDX80, MX300 G2 ->Unified CM -> Sip Trunk-> Meeting Server->CMA (windows) ->CMM -> Meetings ->MX300 G2

Verify whetheruser is able toview the iconfor theparticipant listto showparticipantswho are audibleor have beenaudible withinthe last 30seconds inCisco MeetingApp and viewin CiscoMeetingManagementTool managedby CiscoMeeting Server

An icon willindicatewhichparticipantsare audible,and whichparticipantshave beenaudiblewithin thelast 30seconds

CMS2.4FCS.CMS.G.018



PassedMX200G2,DX70,DX80-> Unified CM -> SipTrunk -> Meeting Server-> CMM -> Meetings ->Sort

Verify whethermeeting list andparticipant listcan be sorted inMeetingManagementTool whileinitiatingconference andmanaged byCisco MeetingServer

Checkwhether themeeting listandparticipantlist can besorted inMeetingManagementTool whileinitiatingconferencein CMS

CMS2.4FCS.CMS.G.019

PassedDX70,DX80,MX200G2-> Unified CM -> SipTrunk -> Meeting Server->CMA (windows) ->CMM -> Meetings

Verify whetherMeetingManagementTool displaysmeetings thathave ended upto 7 days whileinitiatingconference inCMS and viewin CiscoMeetingManagementTool managedby CiscoMeeting Server

CheckwhetherMeetingManagementTooldisplaysmeetingsthat haveended up to7 days whileinitiatingconferencein CMS

CMS2.4FCS.CMS.G.020

PassedWebRTC (Safari onMac)-> Meeting Server

Joinmeeting by“Use myphone” option.Verify whetherthe user canjoin meeting bythis option byenteringmeeting aliasfrom WebRTC(Safari onMac)

Join meetingby enteringmeetingalias and use“Use myphone”option tojoin meetingfromWebRTC(Safari onMac)

CMS2.4FCS.CMS.G.085




Joinmeeting by“Use my videosystem” option.Verify whetherthe user canjoin meeting bythis option byenteringmeeting aliasfrom WebRTC(Safari onMac)

Join meetingby enteringmeetingalias and use“Use myvideosystem”option tojoin meetingfromWebRTC(Safari onMac).

CMS2.4FCS.CMS.G.086


Joinmeeting by“Use thiscomputer”option. Verifywhether theuser can joinmeeting by thisoption byenteringmeeting aliasfrom WebRTC(Safari onMac)

Join meetingby enteringmeetingalias and try“Use thiscomputer”option tojoin meetingfromWebRTC(Safari onMac).

CMS2.4FCS.CMS.G.087


Join themeeting fromWebRTC(Safari onMac)and checkwhether theuser can lockand unlock theconferencefrom WebRTC(Safari onMac).

Verify theuser can lockand unlocktheconferencefromWebRTC(Safari onMac)

CMS2.4FCS.CMS.G.088




Joinmeeting by“Open CiscoMeeting Appfor desktop”option. Verifywhether theuser can joinmeeting by thisoption byenteringmeeting aliasfrom WebRTC(Safari onMac)

Join meetingby enteringmeetingalias and try“Open CiscoMeetingApp fordesktop”option tojoin meetingfromWebRTC(Safari onMac).

CMS2.4FCS.CMS.G.089


Joinmeeting byenteringmeeting aliasusing“ManagementandPresentation”option to jointhe meetingwithoutparticipatingand checkwhether theuser can sharepresentation inthat fromWebRTC(Safari onMac).

Join meetingby enteringmeetingalias and try“ManagementandPresentation”option tojoin themeetingfromWebRTC(Safari onMac)

CMS2.4FCS.CMS.G.090

PassedNAClick on“Settings”option andCheck whetherall icons onsettings areworkingproperly.

Checkwhether allicons on“Settings”option areworkingproperlyfromWebRTC(Safari onMac).

CMS2.4FCS.CMS.G.091



PassedWebRTC(Safari on Mac)-> CMS ->CiscoMeetingApp (Windows)WebRTC(Safari on Mac)-> CMS ->WebRTC(Chrome onAndroid)

Createmultisiteconferencefrom WebRTC(Safari onMac)with CiscoMeeting Appfrom desktopandWebRTC(Chromeon Android).Click on layoutoptions andCheck thebehavior duringthe conference.

CreatemultisiteconferencefromWebRTC(Safari onMac) andcheck thelayoutoptions.

CMS2.4FCS.CMS.G.092

PassedWebRTC (Chrome onAndroid) -> CMSWebRTC (Firefox onWindows) -> CMSWebRTC(Chrome onWindows) ->CMSWebRTC (Safari onMac) -> CMS

Join theongoingmeeting fromWebRTC(Safari onMac)amongWebRTC(Chrome onAndroid) andWebRTC(Firefox onWindows) andsharepresentationfrom WebRTC(Chrome onWindows).

Join theongoingmeetingfromWebRTC(Safari onMac) andsharepresentationfromWebRTC(Chrome onwindows)amongdifferentclients.

CMS2.4FCS.CMS.G.093

PassedSX10 Quick Set -> CMSSX20 Quick Set -> CMSWebRTC (Safari) ->CMS

Join theongoingmeetingbetween CiscoTelePresenceEndpoints withCMS fromWebRTC(Safari onMac)as a guest userand do chatduring a call.

Join theongoingmeetingbetweenTelePresenceendpointsfromWebRTC(Safarion Mac) as aguest userand do chatduring a call.

CMS2.4FCS.CMS.G.094



PassedSX20 Quick Set (Holdand Resume)(Presentation Sharing)and WebRTC (Safari onMac) -> Unified CM ->Sip Trunk -> MeetingServer

Verify whetherafter initiatingMeeting viaMeeting Server, Hold &Resume andPresentationSharing isworking CiscoTelePresenceSX20 QuickSet registeredin CiscoUnifiedCommunicationsManager and inWebRTC(Safari onMac)successfully

Do Hold &Resume andPresentationSharingwhenMeeting isinitiated inSX20 QuickSetregistered inUnified CMto WebRTC(Safari onMac )

CMS2.4FCS.CMS.G.095

PassedWebRTC (Safari onMac)-> Meeting Server ->Cisco Meeting App(Windows)

Direct call fromWebRTC(Safari onMac)to CiscoMeeting App(Windows) andcheck mute &unmute andsharepresentationfrom CiscoMeeting App(Wndows)

Check mute& unmuteand sharepresentationfrom CiscoMeetingApp(Windows)during thedirect callfromWebRTC(Safari onMac)

CMS2.4FCS.CMS.G.096



PassedSX10 Quick Set (Holdand Resume)(Presentation) andWebRTC (Chrome onAndroid) -> Unified CM-> Sip Trunk -> MeetingServer

Verify whetherafter initiatingMeeting withbandwidth of64kbps viaMeeting Server, Hold &Resume andsharepresentation isworking inCiscoTelePresenceSX10 QuickSet registeredin CiscoUnifiedCommunicationsManager and inWebRTC(Chrome onAndroid)successfully

Hold &Resume,SharepresentationwhenMeeting isinitiatedwithBandwidthof 64kbps inSX10 QuickSetregistered inUnified CMto WebRTC(Chrome onAndroid).

CMS2.4FCS.CMS.G.097

PassedSX20 Quick Set (Holdand Resume)(Presentation Sharing)andWebRTC (Chrome onAndroid) -> Unified CM-> Sip Trunk -> MeetingServer

Verify whetherafter initiatingMeeting viaMeeting Server, Hold &Resume andPresentationSharing isworking CiscoTelePresenceSX20 QuickSet registeredin CiscoUnifiedCommunicationsManager and inWebRTC(Chrome onAndroid)successfully

Do Hold &Resume andPresentationSharingwhenMeetinginitiated inSX20 QuickSetregistered inUnified CMto WebRTC(Chrome onAndroid )

CMS2.4FCS.CMS.G.098



PassedWebRTC (Chrome onAndroid) -> CMS

Login CiscoMeeting ServerWebRTC fromChrome onAndroid as auser byentering logincredentials andcheck whetherwe can invitepeople by using“Invitation”invite method.

Verifywhether theuser caninvite peopleby sharingInvitationfromWebRTC(Chrome onAndroid).

CMS2.4FCS.CMS.G.099

PassedCMA(Windows)->CMS->TrustedSip Trunk->SKFBServer->SKFB (Mac)

Verify whetheruser is able tomake a callfrom Skype forBusiness clienton Mac toCisco MeetingApp onWindows usingCisco MeetingServer

Direct callbetweenSkype forBusinessclient onMac andCiscoMeetingApp onWindowsvia CiscoMeetingServer

CMS2.4FCS.CMS.G.100

PassedSX10 Quick Set ->Unified CM -> SIP Trunk-> Meeting Server

Verify whetherName Label isdisplayed inCiscoTelePresenceSX10 QuickSet registeredin CiscoUnifiedCommunicationsManagersuccessfully

Assign theName labelfor CMSConferencein CMS andCheckWhether it isdisplayed inSX10 QuickSet


PassedWebex room kit ->Unified CM -> SIP Trunk-> Meeting Server

Verify whetherName Label isdisplayed inCisco Webexroom kitregistered inCisco UnifiedCommunicationsManagersuccessfully

Assign theName labelfor CMSConferencein CMS andCheckWhether it isdisplayed inWebex roomkit




PassedSX10 Quick Set andMX200 G2 -> UnifiedCM -> SIP Trunk ->Meeting Server

Verify whetherDTMFKeypadis working inCiscoTelePresenceSX10 QuickSet and CiscoTelePresenceMX200 G2registered inCisco UnifiedCommunicationsManagersuccessfully

EnterMeetingNumber viaWeb UIDTMF inSX10 QuickSet andMX200 G2afterinitiating ameeting viaMeetingServer


PassedWebex room kit andWebex room kit Plus ->Unified CM -> SIP Trunk-> Meeting Server

Verify whetherDTMFKeypadis working inCisco Webexroom kit andCisco Webexroom kit Plusregistered inCisco UnifiedCommunicationsManagersuccessfully

EnterMeetingNumber viaWeb UIDTMF inWebex roomkit andWebex roomkit Plus afterinitiating ameeting viaMeetingServer


PassedWebex room kit Plus andDX70 -> Unified CM ->SIP Trunk -> MeetingServer

Verify whetherDTMFKeypadis working inCisco Webexroom kit Plusand CiscoTelePresenceDX70registered inCisco UnifiedCommunicationsManagersuccessfully

EnterMeetingNumber viaWeb UIDTMF inWebex roomkit Plus andDX70 afterinitiating ameeting viaMeetingServer




PassedSX20 Quick Set andMX300 G2 -> UnifiedCM -> SIP Trunk ->Meeting Server

Verify whetherAudio Promptplayed in CiscoTelePresenceSX20 QuickSet and CiscoTelePresenceMX300 G2registered inCisco UnifiedCommunicationsManagersuccessfully

Listen theAudioPromptplayed afterthe Meetinginitiated viaMeetingServer inSX20 QuickSet andMX300 G2


PassedSX10 Quick Set andDX80 -> Unified CM ->SIP Trunk -> MeetingServer

Verify whetherAudio Promptplayed in CiscoTelePresenceSX10 QuickSet and CiscoTelePresenceDX80registered inCisco UnifiedCommunicationsManagersuccessfully

Listen theAudioPromptplayed afterthe Meetinginitiated viaMeetingServer inSX10 QuickSet andDX80


PassedWebex room kit andWebex room kit Plus ->Unified CM -> SIP Trunk-> Meeting Server

Verify whetherAudio Promptplayed in CiscoTelePresenceWebex roomkit and CiscoWebex roomkit Plusregistered inCisco UnifiedCommunicationsManagersuccessfully

Listen theAudioPromptplayed afterthe Meetinginitiated viaMeetingServer inWebex roomkit andWebex roomkit Plus




PassedSX80 Codec and Webexroom kit -> Unified CM-> SIP Trunk -> MeetingServer

Verify whetherHold andResume fromWeb UI inCiscoTelePresenceWebex roomkit and CiscoTelePresenceSX80 Codecregistered inCisco UnifiedCommunicationsManagersuccessfully

InitiateMeeting viaMeetingServer inSX80 Codec& Webexroom kit andclick Holdand Resumein its WebUI


PassedSX10 Quick Set andSX20 Quick Set ->Unified CM -> SIP Trunk-> Meeting Server

Verify whetherHold andResume fromWeb UI inCiscoTelePresenceSX10 QuickSet and CiscoTelePresenceSX20 QuickSet registeredin CiscoUnifiedCommunicationsManagersuccessfully

InitiateMeeting viaMeetingServer inSX10 QuickSet & SX20Quick Setand clickHold andResume inits Web UI




PassedWebex room kit andMX300 G2 -> UnifiedCM -> SIP Trunk ->Meeting Server

Verify whetherPresentationSharing fromCiscoTelePresenceWebex roomkit Plus toCiscoTelePresenceMX300 G2then Hold andResume fromWeb UI afterinitiatingMeeting viaMeeting Serverregistered inCisco UnifiedCommunicationsManagersuccessfully

PresentationSharingfrom Webexroom kitPlus toMX300 G2then clickHold andResume inits Web UIafterinitiatingMeeting viaMeetingServer


PassedSX10 Quick Set andSX20 Quick Set ->Unified CM -> SIP Trunk-> Meeting Server

Verify whetherPresentationSharing fromCiscoTelePresenceSX10 QuickSet to CiscoTelePresenceSX20 QuickSet then Holdand Resumefrom Web UIafter initiatingMeeting viaMeeting Serverregistered inCisco UnifiedCommunicationsManagersuccessfully

PresentationSharingfrom SX10Quick Set toSX20 QuickSet thenclick Holdand Resumein its WebUI afterinitiatingMeeting viaMeetingServer




PassedSX10Quick Set A , SX10Quick Set B , SX10Quick Set C , SX10Quick Set D-> UnifiedCM -> SIP Trunk ->Meeting Server

Verify whetherParticipantsdisplayedcorrectly inboth CiscoMeeting Serverand inEndpoints WebUI afterinitiatingMeeting viaMeeting Serverin Four CiscoTelePresenceSX10 QuickSet registeredin CiscoUnifiedCommunicationsManagersuccessfully

CheckParticipantsList in CMSWeb UI andEndpointsWebUI afterinitiatingMeeting viaMeetingServer inFour SX10Quick Setregistered inUnified CM


PassedMX300 G2 and Webexroom kit -> Unified CM-> SIP Trunk -> MeetingServer

Verify whetherParticipantsdisplayedcorrectly inboth CiscoMeeting Serverand inEndpoints WebUI afterinitiatingMeeting viaMeeting Serverin CiscoTelePresenceMX300G2 andCiscoTelePresenceWebex roomkit registered inCisco UnifiedCommunicationsManagersuccessfully

CheckParticipantsList in CMSWeb UI andEndpointsWebUI afterinitiatingMeeting viaMeetingServer inMX300 G2and Webexroom kitregistered inUnified CM




PassedSX10Quick Set A , SX10Quick Set B and SX80Codec -> Unified CM ->SIP Trunk -> MeetingServer

Verify whetherMeetinginitiated in twoCiscoTelePresenceSX10 QuickSet and CiscoTelePresenceSX80 Codecafter enteringPasscode , allregistered inCisco UnifiedCommunicationsManagersuccessfully

AssignPasscode inCMS andinitiateMeeting viaMeetingServer intwo SX10Quick Setand SX80Codec


PassedDX80 , MX200 G2 andSX10 Quick Set ->Unified CM -> SIP Trunk-> Meeting Server

Verify whetherMeetinginitiated inCiscoTelePresenceDX80 , CiscoTelePresenceMX200G2 andCiscoTelePresenceSX10 QuickSet afterenteringPasscode , allregistered inCisco UnifiedCommunicationsManagersuccessfully

AssignPasscode inCMS andinitiateMeeting viaMeetingServer inDX80 ,MX200 G2and SX10Quick Set





Verify whetherMeetinginitiated inCiscoTelePresenceSX20 QuickSet and CiscoTelePresenceDX70 afterenteringPasscode , bothregistered inCisco UnifiedCommunicationsManagersuccessfully

AssignPasscode inCMS andinitiateMeeting viaMeetingServer inSX20 QuickSet andDX70


PassedSX10 Quick Set andSX80 Codec -> UnifiedCM -> SIP Trunk ->Meeting Server

Verify whetherMeetinginitiated in twoCiscoTelePresenceSX10 QuickSet and CiscoTelePresenceSX80 Codecafter enteringPasscode inDTMFKeypad, bothregistered inCisco UnifiedCommunicationsManagersuccessfully

EnterPasscode inDTMFKeypad intwo SX10Quick Setand SX80Codec afterinitiatingMeeting viaMeetingServer





Verify whetherMeetinginitiated inCiscoTelePresenceSX20 QuickSet and CiscoTelePresenceDX70 afterenteringPasscode inDTMFKeypad, bothregistered inCisco UnifiedCommunicationsManagersuccessfully

EnterPasscode inDTMFKeypad inSX20 QuickSet andDX70 afterinitiatingMeeting viaMeetingServer


PassedDX80 , MX200 G2 andSX10 Quick Set ->Unified CM -> SIP Trunk-> Meeting Server

Verify whetherMeetinginitiated inCiscoTelePresenceDX80 , CiscoTelePresenceMX200G2 andCiscoTelePresenceSX10 QuickSet afterenteringPasscode inDTMFKeypad, bothregistered inCisco UnifiedCommunicationsManagersuccessfully

EnterPasscode inDTMFKeypad inDX80 ,MX200 G2and SX10Quick SetafterinitiatingMeeting viaMeetingServer


PassedNAVerify whetherone-one chatbetween twoCMA users intheorganizationwhile logged infrom WebRTCin JapaneseEnvironment

One-OneChatbetween twoCMA userslogged infromWebRTC inJapaneseEnvironment




PassedNAVerify whetherone-one chatbetween twoCMA users intheorganizationone logged infrom CiscoMeetingApp iniPhone andother fromWebRTC inJapaneseEnvironment

One-OneChatbetween twoCMA usersone loggedin fromCMA iniPhone andother fromWebRTC inJapaneseEnvironment


PassedNAVerify whetherone-one chatbetween twoCMA users intheorganizationone logged infrom CiscoMeetingApp iniPad and otherfrom WebRTCin JapaneseEnvironment

One-OneChatbetween twoCMA usersone loggedin fromCMA iniPad andother fromWebRTC inJapaneseEnvironment


PassedNAVerify whethergroup chatbetween CiscoMeeting Appusers by addingthem to thespace createdfrom WebRTCin Japaneseenvironment

Group chatbetweenCMA usersby addingthe users tothe spacecreated fromWebRTCuser inJapaneseEnvironment




PassedNAVerify whethergroup chatbetween CiscoMeeting Appusers by addingthem to thespace createdfrom CiscoMeeting AppWindows userin Japaneseenvironment

Group chatbetweenCMA usersby addingthe users tothe spacecreated fromCMAWindowsuser inJapaneseEnvironment


CSCvm64023FailedNAVerify whetherthe chatnotification inchat bubble isgetting clearedafter readingthe messagesfor guest loginin WebRTC

Chatnotificationfor guestlogin inWebRTC


CSCvm65578FailedNAVerify whetherthe completespace name isdisplayed for adirect call whencall made againin thetemporaryspace

Space namefor a directcall whencall madeagain in thetemporaryspace


CSCvm96189FailedNAVerify whetherthe chatmessages in themeeting spaceare receivedsuccessfully inCMAWindowswithoutrefreshing themeeting space

Receive chatmessages ina meetingspace inCMA(Windows)withoutrefresh




CSCvm96198FailedNAVerify whetherthe chatmessages thatare sentrecently areread in CMAfor windowswithoutscrolling to thetop

Read thelastly sentchatmessages inCMAWindowswithoutscrolling tothe top


CSCvn00027FailedNAVerify whetherthe Japanesecharacters usedin the json filefor WebRTCcustomizationis gettingreflected inWebRTC UI

WebRTCcustomizationfor browsertab label andpanel labelusingJapanesecharacters inthe json file


CSCvm80248FailedWebRTC1 (Chrome) ->Meeting Server -> CiscoMeeting App (Windows)-> Meeting Server ->CiscoMeetingApp (iPad)-> Meeting Server ->Cisco Meeting App(iPhone)

Verify whetherthe joinparticipantsusers namesdisplaycorrectly orwrongly duringconferencemeeting viaiPad

Joinparticipantsnamesdisplayduringconferencemeeting viaiPad


CSCvm80242FailedWebRTC1 (Chrome) ->Meeting Server -> CiscoMeeting App (Windows)-> Meeting Server ->CiscoMeetingApp (iPad)-> Meeting Server ->Cisco Meeting App(iPhone

Verify whetherthe meetinginfo duringconferencemeeting viaiPad

Duringconferencemeeting viaiPad


CSCvm80234FailedWebRTC1 (Chrome) ->Meeting Server -> CiscoMeeting App (Windows)-> Meeting Server ->CiscoMeetingApp (iPad)-> Meeting Server ->Cisco Meeting App(iPhone)-> MeetingServer -> WebRTC2(Chrome)

Verify whetherthe participantslist displayingcorrectly orwrongly duringconferencemeeting viaiPhone andiPad

Joiningmultipleparticipantsin a spacevia iPad andiPhone




CSCvm79990FailedWebRTC1 (Chrome) ->Meeting Server ->WebRTC2 (Chrome) ->Meeting Server -> CiscoMeeting App (Windows)

Verify whilejoiningmeetingas a guest thehost whocreated, themeeting spacegetsdisconnected orconnected fromthe meetingsvia WebRTC

Joiningmeeting as aguest hostviaWebRTC


CSCvm93547FailedWebRTC1 (Chrome) ->Meeting Server -> CiscoMeeting App (Windows)-> Meeting Server ->CiscoMeetingApp (iPad)-> Meeting Server ->Cisco Meeting App(iPhone)

Verify whetherthe in iPad andiPhone mediacontrols ismissing oravailable whencreatedconferencemeeting viawebRTC

In iPad andiPhonemediacontrols ismissing oravailablewhencreatedconferencemeeting viawebRTC


Cisco TelePresence Multipoint Control UnitDefectsStatusCall Component FlowDescriptionTitleLogical ID

PassedDX70, DX80 and SX10Quick Set (Hold andResume) -> Unified CM-> Sip Trunk -> MCU5310

Verify whetherHold and Resumein Meet MeConference fromCisco TelePresenceSX10 Quick Set,CiscoWebexDX70and Cisco WebexDX80 using CiscoTelePresenceMCU5310 all registeredin Cisco UnifiedCommunicationsManagersuccessfully

Hold andResume inMeet MeConference inSX10 QuickSet, DX70and DX80using MCU5310registered inUnified CM

UCJ12.5SPH1S.MCU.G.001


Test Results SummaryCisco TelePresence Multipoint Control Unit

PassedSX20 Quick Set A ,SX20Quick Set B -> UnifiedCM ->Sip Trunk -> MCU5310 SX20Quick Set B ->Transfer -> Unified CM->DX80

Verify whether Callcan be Transferredin Meet MeConference fromCisco TelePresenceSX20 Quick Set toCiscoWebexDX80using CiscoTelePresenceMCU5310 all registeredin Cisco UnifiedCommunicationsMangersuccessfully

Call Transferin Meet MeConferencefrom SX20Quick Set toDX80 usingMCU5310 allregistered inUnified CM


PassedSX10Quick Set-> UnifiedCM-> MX200 G2 SX10Quick Set-> Add ->Unified CM-> SipTrunk-> MRGL-> MCU5320-> SX20 Quick SetSX10 Quick Set-> MergeSX10 Quick Set(Hold/Resume)->Presentation Sharing

Verify WhetherHold/ResumePresentationsharing in JapaneseEnvironment fromCisco TelePresenceSX10 Quick Set inan adhocconference betweenCisco TelePresenceMX200 G2 andCisco TelePresenceSX20 Quick Set allregistered in CiscoUnifiedCommunicationsManager via CiscoTelePresenceMCU5320 Workssuccessfully

In JapaneseEnvironmentHold/ResumePresentationsharing in anAdhocconferencefrom SX10Quick Setregistered inUnified CMvia MCU5320




PassedSX10 Quick Set, SX80Codec and SX20 QuickSet (Check Participants)-> Unified CM->MRGL-> SIP Trunk ->MCU 4510

Verify whetherCheck Participantsin Meet MeConference fromCisco TelePresenceSX10 Quick Set,Cisco TelePresenceSX80 Codec andCisco TelePresenceSX20 Quick Setusing CiscoTelePresenceMCU4510 all registeredin Cisco UnifiedCommunicationsManagersuccessfully

CheckParticipants inMeet MeConferencefrom SX10Quick Set,SX80 Codecand SX20Quick Setusing MCU4510registered inUnified CM


PassedSX80 Codec -> UnifiedCM ->DX70 SX80Codec-> Add -> Unified CM ->MRGL -> Sip Trunk ->MCU4510 ->DX80SX10Quick Set -> MergeMCU4510 -> Check withdifferent Layout Option

Verify whetherchanging differentlayout option isworkingsuccessfully viaweb UI of CiscoTelePresenceMCU4510 while inAdhoc Conferenceamong CiscoTelePresence SX80Codec to CiscoWebex DX70 andCiscoWebexDX80all are registered inCisco UnifiedCommunicationsManager

Checkdifferentlayout optionin AdhocConferenceusing MCU4510 amongSX80 Codec,DX70 andDX80




PassedSX10 Quick Set(pairedwith IOS) -> Unified CM-> MX200 G2 SX10Quick Set->UnifiedCM->SIPTrunk->MRGL->MCU5320->SX20 Quick SetSX10 Quick Set->MergeSX10 Quick Set(pairedwith IOS ) -> SharePresentation SX10 QuickSet(paired with IOS) ->Hold/Resume

Verify whether inJapaneseEnvironmenthold/resumePresentationSharing in anAdhoc Conferencefrom CiscoTelePresence SX10Quick Set pairedwith IOS usingCisco Proximitybetween CiscoTelePresenceMX200 G2 andSX20 Quick Set allregistered in CiscoUnifiedCommunicationsManager via CiscoTelePresenceMCU5320.

Hold/ResumePresentationSharing in anAdhocConferencefrom SX10Quick Setpaired withIOS usingProximityregistered inUnified CMvia MCU5320 inJapaneseEnvironment

UCJ12.5SPHIIS.MCU.G.002

PassedDX80(paired withBluetoothHeadset)->UnifiedCM->SIP Trunk->CiscoVCS->MX200 G2DX70->CiscoVCS->Zone->UnifiedCM->DX80(paired withBluetooth Headset)DX80(paired withBluetoothHeadset)->Merge->UnifiedCM->MRGL->SIPTrunk->MCU 5320

Verify Whetherinitiating CiscoTelePresenceMCU5320 Adhocconference fromCiscoWebexDX80paired withBluetooth Headsetregistered in CiscoUnifiedCommunicationsManager amongCisco TelePresenceMX200 G2 andCiscoWebexDX70both registered inCisco TelePresenceVideoCommunicationServer workssuccessfully

Initiate MCU5320 Adhocconferencefrom DX80paired withBluetoothHeadset withCisco VCSregisteredEndpoints




PassedSX10 Quick Set,MX300G2 (Call Rate as 3072kb/s) ,SX80Codec,WebexRoom Kit Plus->CiscoVCS ->Zone ->MCU5320

Verify whether InLong durationMeetMe Conferencewith Call Rate 3072kb/s between CiscoTelePresence SX10Quick Set, CiscoTelePresenceMX300 G2 , CiscoTelePresence SX80Codec and CiscoWebex Room KitPlus via CiscoTelePresenceMCU5320 all registeredas H323 endpointsin Cisco VideoCommunicationServer Successfully

LongDurationMeet MeConferencewith call rate128 kb/sbetweenSX10 QuickSet, DX80,MX300 G2,SX80 Codecand WebexRoom KitPlus viaMCU5320 allregistered asH323endpoints inCisco VCS


PassedSX10 Quick Set->UnifiedCM->SX20 Quick SetSX20 Quick Set(3072Kb/s)->Add->UnifiedCM->SIPTrunk->MRGL->DX80SX10 QuickSet->Add->UnifiedCM->SIPTrunk->MRGL->DX70SX10 Quick Set->MergeSX10 QuickSet->Presentation Sharing

Verify whetherAfter setting CallRate as 3072 kb/sPresentationSharing in AdhocConference fromCisco TelePresenceSX10 Quick Set toCisco TelePresenceSX20 Quick Set,CiscoWebexDX70and Cisco WebexDX80 using CiscoTelePresenceMCU5320 all registeredin Cisco UnifiedCommunicationsManager.

Set Call rateas 3072 kb/sthenPresentationSharing inAdhocConferencefrom SX10Quick Set toSX20 QuickSet, DX70and DX80using MCU5320 allregistered inUnified CM


PassedNAVerify whetherafter settingConferencewelcome messageduration to 10seconds via MCU5320WebUI worksSuccessfully.

SettingConferencewelcomemessageduration to 10seconds viaMCU 5320WebUI.




PassedNAVerify whetherafter SettingTransmitted videoresolutions to 4:3for widescreendisplay via MCUWebUI 5320 worksSuccessfully.

SettingTransmittedvideoresolutions to"4:3 forwidescreendisplay" viaMCU WebUI5320 workssuccessfully.


PassedNAVerify whetherafter clicking ondisabled in "Usefull screen view fortwo participants"via MCU 5320WebUI worksSuccessfully.

Clicking ondisabled in"Use fullscreen viewfor twoparticipants"via MCU5320 WebUI


PassedMX200G2 ->Unified CM->MX300 G2MX200 G2->Unified CM ->SIPTrunk->MRGL->MCU4510->SX80 CodecMX300 G2->Merge

Verify whetherInter cluster Adhocconference can bemade from CiscoTelePresenceMX300 G2 andCisco TelePresenceMX200 G2registered in CiscoUnifiedCommunicationsManager Cluster 1to CiscoTelePresence SX80codec registered inCisco UnifiedCommunicationsManager Cluster 2via CiscoTelePresenceMCU4510

Make an Intercluster AdhocconferencebetweenMX300 G2,MX200 G2and SX80codec viaMCU 4510




PassedSX80 Codec(EM profile),MX200 G2 , SX20 QuickSet-> Unified CM -> SIPTrunk ->MRGL->MCU5310

Verify whether EMof CiscoTelePresence SX80Codec, CiscoTelePresenceMX200 G2 andCisco TelePresenceSX20 Quick Set allregistered in CiscoUnifiedCommunicationsManager can join aMeetingConferencemanaged by CiscoTelePresenceMCU5310 Successfully

Initiate aMeet Meconferenceamong EMprofile ofSX80 Codec,MX200 G2and SX20Quick Setmanaged byMCU 5310


PassedMX300 G2 ->Unified CM-> DX70 MX300 G2->Add->Unified CM->MRGL->SIP Trunk->MCU 4510-> DX80MX300 G2 ->MergeMX300G2(Hold/Resume)-> Wireless Sharing

Verify whetherWireless Sharingvia Cisco Proximityworks successfullyduring Adhocconference amongCisco TelePresenceMX300 G2 loggedwith Cisco WebexDX70 and CiscoWebex DX80 allregistered in CiscoUnifiedCommunicationsManager via CiscoTelePresenceMCU4510

CheckWirelessSharing viaProximity(Paired withMac) inAdhocconferencefrom MX300G2, DX70and DX80 viaMCU 4510


PassedSX20Quick Set (Hold andResume) , SX80 Codec(Hold and Resume) ->Unified CM -> SIP Trunk->MRGL->MCU 5310

Verify whetherHold and Resumein Meet MeConference fromCisco TelePresenceSX20 Quick Setand CiscoTelePresence SX80Codec using CiscoTelePresenceMCU5310 all registeredin Cisco UnifiedCommunicationsManagerSuccessfully

Hold andResume inMeet MeConference inSX20 QuickSet and SX80Codec viaMCU 5310registered inUnified CM




PassedSX10 Quick Set ->Unified CM -> DX70SX10Quick Set -> Add ->Unified CM -> SIP Trunk->MRGL->MCU4510 ->DX80 SX10 Quick Set->Merge MCU 4510 ->Check with differentLayout option

Verify whetherchanging differentlayouts option isworkingsuccessfully viawebUI of CiscoTelePresenceMCU4510 while inAdhoc Conferenceamong CiscoTelePresence SX10Quick Set to CiscoWebex DX70 andCiscoWebexDX80all are registered inCisco UnifiedCommunicationsManager

Checkdifferentlayouts optionin AdhocConferenceusing MCU4510 amongSX10 QuickSet, DX70and DX80


PassedMX200 G2->UnifiedCM->SIPTrunk->MRGL-> MCU5310 MCU 5310->CheckLog Message

Verify whether theuser can check thelog messagesgenerated in CiscoTelePresenceMCU5310

Check the logmessages inMCU 5310afterMeetMeConference inMX200 G2


PassedDX70> Unified CM ->DX80, DX80->Add->UnifiedCM->MRGL->SIP Trunk->MCU4510->MX200G2, Keeping Long durationDX70-> Merge

Check whetherduration Adhocconference amongDX70, DX80 andMX200 G2 usingCisco TelePresenceMCU 4510 allregistered in CiscoUnifiedCommunicationsManager workssuccessfully

Checkinglong durationfor AdhocconferenceamongDX70,DX80and MX200G2 usingMCU 4510.

UCJ12.5PH3S.MCU.G.004



PassedSX80 Codec ->UnifiedCM->MX200 G2, SX80Codec -> Add->UnifiedCM ->MRGL->SIP Trunk->MCU 5320->SX20Quick Set, SX80 Codec>Merge, SX80 Codec->Presentation Sharing,SX80 Codec->Hold/Resume

Verify whetherpresentation can beshared whilehold/resume inAdhoc Conferenceamong CiscoTelePresence SX80Codec, CiscoTelePresenceMX200 G2 andCisco TelePresenceSX20 Quick Setmanaged by CiscoTelePresenceMCU5310 all endpointsregistered in CiscoUnifiedCommunicationsManager

In JapaneseEnvironmentHold/ResumePresentationsharing in anAdhocconferencefrom SX80Codecregistered inUnified CMvia MCU5310


PassedSX80Codec->UnifiedCM-> DX70, SX80 Codec->Add->Unified CM->MRGL->SIP Trunk->MCU 5310->DX80,SX80 Codec->Merge,SX80Codec(Hold/Resume) ->Wireless Sharing

Verify whetherWireless Sharingvia Cisco Proximityworks successfullyduring Adhocconference amongSX80Codec loggedwith Cisco WebexDX70 and CiscoWebex DX80 allregistered in CiscoUnifiedCommunicationsManager via CiscoTelePresenceMCU5310

CheckWirelessSharing viaProximity(Paired withMac) inAdhocconferencefrom SX80Codec, DX70and DX80 viaMCU 5310




PassedMX200 G2,SX20 QuickSet-> Unified CM -> SipTrunk -> Meet-Me(MCU5320)MX200 G2->CallTransfer->SIPTrunk->DX70

Verify whether calltransfer happensfrom CiscoTelePresenceMX200 G2 toCiscoWebexDX70which is already inMeet-Meconference withCisco TelePresenceSX20 Quick Setmanaged by MCU5320 all endpointsregistered in CiscoUnifiedCommunicationsManager

Transfer thecall fromMX200 G2 toDX70 whichis already inMeet-Meconferencewith SX20Quick Setmanaged byMCU5320 allendpointsregistered inUnified CM


PassedSX10 Quick Set->UnifiedCM Cluster1->SIPTrunk->Unified CMCluster 2->MX200G2SX10 Quick Set->Add->Unified CM->MRGL->SIP Trunk->MCU 5320-> SX80Codec

Verify whetherIntercluster AdhocConferencemanaged by CiscoTelePresenceMCU5320 among CiscoTelePresence SX10Quick Set, CiscoTelePresence SX80Codec bothendpoints registeredin Cisco UnifiedCommunicationsManager cluster 1and CiscoTelePresenceMX200 G2registered in CiscoUnifiedCommunicationsManager cluster 2

Make an Intercluster Adhocconferenceamong SX10Quick Set,MX200 G2and SX80codecmanaged byMCU5320 allendpointsregistered inUnified CM




PassedSX10 Quick Set, SX20Quick Set->Unified CM-> Sip Trunk->Meet-Me(MCU 5320)

Verify whetherclicking “Switch allparticipants to thisview” from theWeb User Interfaceof CiscoTelePresenceMCU5320 changes allthe participants tosame Conferencecustom layoutduring Meet-MeConference,endpoints registeredin Cisco UnifiedCommunicationsManager

Clicking“Switch allparticipants tothis view”from the WebUI of MCU5320 changesall theparticipants tosameConferencecustom layoutduringMeet-MeConference,endpointsregistered inUnified CM


PassedMX300 G2, Webex RoomKit Plus->Cisco VCS ->Zone-> Meet-Me(MCU5320)

Verify whetherclicking “Sendmessage” from theWeb User Interfaceof CiscoTelePresenceMCU5320 reflects thesame message inOn Screen Displayduring Meet-MeConference for allendpoints registeredin CiscoTelePresenceVideoCommunicationServer

Clicking“Sendmessage”from the WebUI of MCU5320 reflectsthe samemessage inOSD duringMeet-MeConferencefor allendpointsregistered inCisco VCS


PassedSX80 Codec, DX70->Cisco VCS -> Zone ->Meet-Me(MCU 5320)

Verify whetherclicking “Endconference” duringMeet-MeConference ends allthe active callsfrom Web UserInterface of CiscoTelePresenceMCU5320 for allendpoints registeredin CiscoTelePresenceVideoCommunicationServer

Clicking “Endconference”from the WebUI of MCU5320 ends allthe activecalls duringMeet-MeConferencefor allendpointsregistered inCisco VCS




PassedMX200 G2, SX80Codec->Cisco VCS ->Zone -> Meet-Me(MCU5320)

Verify whetherclicking Stop videobutton duringMeet-MeConference shouldstop the video fromthat device fromWeb User Interfaceof CiscoTelePresenceMCU5320 for allendpoints registeredin CiscoTelePresenceVideoCommunicationServer

Clicking Stopvideo buttonfrom the WebUI of MCU5320 shouldstop the videofrom thatdevice duringMeet-MeConferencefor allendpointsregistered inCisco VCS


PassedDX80, SX10 QuickSet->Cisco VCS ->Zone-> Meet-Me(MCU5320)

Verify whetherclicking “Endconference” duringMeet-MeConference shouldend the active callfrom Web UserInterface of CiscoTelePresenceMCU5320 for allendpoints registeredas H.323 in CiscoTelePresenceVideoCommunicationServer

Clicking“Disconnect”from the WebUI of MCU5320 shouldend the activecall duringMeet-MeConferencefor allendpointsregistered asH.323 inCisco VCS


PassedMX200G2 ->Unified CM1-> MX300 G2MX200G2->Unified CM 1->SIPTrunk->Unified CM2->Add->MRGL->SIPTrunk ->MCU4510->DX80MX200G2(Merge)

Verify whetherIntercluster Adhocconference can bemade from CiscoTelePresenceMX300 G2 andCisco TelePresenceMX200 G2registered in CiscoUnifiedCommunicationsManager Cluster 1to Cisco WebexDX80 registered inCisco UnifiedCommunicationsManager Cluster 2via Cisco MCU4510.

Make anInterclusterAdhocconferencebetweenMX200 G2,MX300 G2and DX80 viaMCU 4510

UCJ12.5SEFT.MCU.G.005



PassedDX70> Unified CM ->DX80, DX80->Add->UnifiedCM->MRGL->SIP Trunk->MCU4510->MX200G2, DX70-> Merge

Checkwhether longduration Adhocconference amongCisco WebexDX70, CiscoWebex DX80 andCisco TelePresenceMX200 G2 usingCisco MCU 4510all registered inCisco UnifiedCommunicationsManager workssuccessfully

Checkinglong durationfor AdhocconferenceamongDX70,DX80 andMX200 G2using MCU4510.


PassedSX80 Codec,MX200G2,MX300 G2 -> CiscoVCS> Meet-Me -MCU4510

Verify whetherCisco TelePresenceSX80Codec, CiscoTelePresenceMX200 G2 andCisco TelePresenceMX300 G2 allregistered in CiscoVideoCommunicationServer can join aMeetingConferencemanaged by CiscoMCU 4510

Initiate aMeet-Meconferenceamong SX80Codec,MX200 andMX300managed byMCU4510 allend pointsregistered inCisco VCS


PassedSX10 Quick Set->UnifiedCM Cluster1->SIPTrunk->Unified CMCluster 2->MX200G2SX10 Quick Set->Add->Unified CM->MRGL->SIP Trunk->MCU 4510-> SX80Codec

Verify whetherIntercluster AdhocConferencemanaged by CiscoMCU 4510 amongCisco TelePresenceSX10 Quick Set,Cisco TelePresenceSX80 Codec bothendpoints registeredin Cisco UnifiedCommunicationsManager Cluster 1and CiscoTelePresenceMX200 G2registered in CiscoUnifiedCommunicationsManager Cluster 2

Make anInterclusterAdhocconferenceamong SX10Quick Set,MX200 G2and SX80codecmanaged byMCU4510 allendpointsregistered inUnified CM




PassedSX10Quick Set-> UnifiedCM -> DX70SX10 QuickSet ->Add->Unified CM->MRGL->SIP Trunk->MCU 4510->SX80Codec SX10 Quick Set ->MergeMCU 4510 ->Check with differentLayout Option

Verify whetherdifferent layoutsoption in AdhocConference usingCisco MCU 4510among CiscoTelePresence SX10Quick Set, CiscoWebex DX70 andCisco TelePresenceSX80 all endpointsregistered in CiscoUnifiedCommunicationsManager

Checkdifferentlayouts optionduring AdhocConferenceusing MCU4510 amongSX10 QuickSet, DX70and SX80Codec allendpointsregistered inUnified CM


PassedSX80 Codec -> UnifiedCM -> MX300 G2, SX80Codec -> Add->UnifiedCM ->MRGL->SIP Trunk->MCU 5320->SX10Quick Set, SX80 Codec>Merge, SX80 Codec->PresentationSharing,Hold/Resume

Verify whetherpresentation can beshared whileHold/Resume inAdhoc Conferenceamong SX80Codec, MX300 G2and SX10 QuickSet managed byCisco MCU 5320all endpointsregistered in CiscoUnifiedCommunicationsManager inJapaneseEnvironment

Hold/ResumePresentationsharing in anAdhocconferencefrom SX80Codecregistered inUnified CMvia MCU5320 inJapaneseEnvironment


PassedMX300 G2 ->UnifiedCM->Sip Trunk-> MCU5320

Verify whether theuser can check thelog messagesgenerated in CiscoMCU 5320

Check the logmessages inMCU 5320afterMeet-MeConference inMX300 G2




PassedSX10 Quick Set A,SX10Quick Set B -> UnifiedCM -> SIP Trunk ->MCU5320 SX10 Quick SetA(Transfer)->UnifiedCM->SX80 Codec

Verify whether CallTransfer inMeet-MeConference fromCisco TelePresenceSX10 Quick Set toCisco TelePresenceSX80 Codec usingCisco MCU 5320all registered inCisco UnifiedCommunicationsManger

Call Transferin Meet-MeConferencefrom SX10Quick Set toSX80 Codecusing MCU5320 allregistered inUnified CM


PassedSX80 Codec(EM profile),MX300 G2 , SX10 QuickSet-> Unified CM -> SipTrunk ->Meet-Me -MCU5320

Verify whether EMof CiscoTelePresence SX80Codec, CiscoTelePresenceMX300 G2 andCisco TelePresenceSX10 Quick Set allregistered in CiscoUnifiedCommunicationsManager can join aMeetingConferencemanaged by CiscoMCU 5320

Initiate aMeet-Meconferenceamong EMprofile ofSX80 Codec,MX300 G2and SX10Quick Setmanaged byMCU 5320


PassedSX80 Codec, MX200 G2(768 kb/s) , DX70->CiscoVCS ->Zone->Meet-Me(MCU 5320)

Verify whetherLong durationMeet-MeConference withBandwidth 768 kb/samong CiscoTelePresence SX80Codec, CiscoTelePresenceMX200 G2 andCiscoWebexDX70managed by CiscoMCU 5320 allendpoints registeredas H.323 in CiscoTelePresenceVideoCommunicationServer

LongDurationMeet-MeConferencewithBandwidth768 kb/samong SX80Codec,MX200 G2and DX70managed byMCU5320 allendpointsregistered asH.323endpoints inCisco VCS




PassedSX80 Codec,SX10 QuickSet,SX20 Quick Set->Unified CM -> Sip Trunk-> Meet-Me(MCU 5320)

Verify whether aMeet-Meconference amongCisco TelePresenceSX80Codec, CiscoTelePresence SX10Quick Set andCisco TelePresenceSX20 Quick Setmanaged by CiscoMCU 5320 allendpoints registeredin Cisco UnifiedCommunicationsManager.

Initiate aMeet-Meconferenceamong SX80Codec, SX10Quick Set andSX20 QuickSet managedbyMCU5320all endpointsregistered inUnified CM.


PassedWebex Room Kit Plus,SX10 Quick Set A, SX10Quick Set B (Meet-Me) ->Unified CM -> SIP Trunk-> MCU 5310

Verify whetherNoise Suppressionoption is working inCiscoWebexRoomKit Plus in CiscoMCU 5310Conference withtwo CiscoTelePresence SX10Quick Set allregistered in CiscoUnifiedCommunicationsManager

CheckwhetherNoiseSuppressionoptionworking inWebex RoomKit Plus inMCU 5310Conferencewith twoSX10 QuickSet bothregistered inUnified CM


PassedSX20 Quick Set ,MX200G2 (Meet-Me) -> UnifiedCM -> SIP Trunk ->MCU5310

Verify whetherMeet-MeConference isworking withdifferent Bandwidthin CiscoTelePresence SX20Quick Set andCisco TelePresenceMX200 G2 allregistered in CiscoUnifiedCommunicationsManager managedby Cisco MCU5310

Meet-MeConference inSX10 QuickSet withdifferenceBandwidthamong SX20Quick Set andMX200 G2using MCU5310 allregistered inUnified CMin JapaneseEnvironment




PassedSX80 Codec , MX200 G2(Meet-Me) ->Unified CM-> SIP Trunk -> MCU5310

Verify whetherMeet-MeConference inCisco TelePresenceSX80 Codec andCisco TelePresenceMX200 G2 bothregistered in CiscoUnifiedCommunicationsManager inJapaneseEnvironment andclick Hold andResume in bothendpoints managedby Cisco MCU5310

Hold andResume inMeet-MeConferenceusing MCU5310 in SX80Codec andMX200 G2bothregistered inUnified CMin JapaneseEnvironment


PassedWebex DX80 , SX20Quick Set (Meet-Me) ->Unified CM -> SIP Trunk-> MCU 5310

Verify whetherParticipant list inMeet-MeConference usingCiscoMCU5310 inCisco TelePresenceSX20 Quick Setand CiscoTelePresenceWebex DX80 bothregistered in CiscoUnifiedCommunicationsManager inJapaneseEnvironment

CheckParticipantslist inMeet-MeConferenceusing MCU5310 inDX80and SX20Quick Setbothregistered inUnified CMin JapaneseEnvironment




PassedSX20 Quick Set , SX80Codec and Webex DX80(Meet-Me) ->Unified CM-> SIP Trunk -> MCU5310

Verify whetherMeet-MeConference isworking withdifferent call ratesin CiscoTelePresence SX20Quick Set andCisco TelePresenceSX80 Codec andCisco TelePresenceWebex DX80 allregistered in CiscoUnifiedCommunicationsManager managedby Cisco MCU5310

Meet-MeConference inSX20 QuickSet withdifferent callrates amongSX80 Codecand DX80using MCU5310 allregistered inUnified CMin JapaneseEnvironment


PassedWebex Room Kit ,DX70A, DX70 B (Meet-Me) ->Unified CM -> SIP Trunk-> MCU 5310

Verify whetherNoise Suppressionoption is working inCiscoWebexRoomKit in Meet-MeConference withtwo Cisco WebexDX70 all registeredin Cisco UnifiedCommunicationsManager managedby MCU 5310

CheckwhetherNoiseSuppressionoptionworking inWebex RoomKit in MCU5310Conferencewith twoDX70 bothregistered inUnified CM


Cisco TelePresence ServerDefectsStatusCall Component



Test Results SummaryCisco TelePresence Server

PassedIX5000 -> UnifiedCM -> DX70IX5000 -> Add ->Unified CM ->MRGL -> SipTrunk ->TelePresenceConductor ->TelePresenceServer on VM ->EX90, SX10 QuickSet IX5000(PresentationSharing) -> Merge

Verify presentation sharingfrom Cisco TelePresenceIX5000 during Adhocconference with CiscoWebex DX70 and CiscoTelePresence System EX90and Cisco TelePresenceSX10 Quick Set, allregistered with CiscoUnified CommunicationsManager via CiscoTelePresence Server onVirtual Machine managedby Cisco TelePresenceConductor workssuccessfully

Presentationsharing fromIX5000 duringAdhocconference viaTelePresenceServer on VM

UCJ12.5PH1S.TS.G.001

PassedDX80, SX20QuickSet, SX80 Codec ->Unified CM -> SipTrunk ->TelePresenceConductor ->TelePresenceServer 7010 (Meetme conference)Meet MeConference ->TelePresenceConductor ->Unified CM ->MX200 G2

Verify whether CiscoTelePresence MX200 G2joins automatically as autodialed participant to themeet me conference amongCisco Webex DX80, CiscoTelePresence SX20 QuickSet, Cisco TelePresenceSX80 Codec all registeredwith Cisco UnifiedCommunications Managervia Cisco TelePresenceServer 7010 managed byCisco TelePresenceConductor

Check theparticipation ofMX200 G2added as autodialedparticipant to theMeet Meconference viaTelePresenceServer 7010


PassedCiscoWebexRoomKit Plus -> CiscoVCS -> Zone ->TelePresenceConductor ->TelePresenceServer onVM(Meetme conference)Meet MeConference ->TelePresenceConductor -> Zone-> Cisco VCS ->SX80 Codec

Verify whether the autodialed participant CiscoTelePresence SX80 Codeccontinues to be in CiscoTelePresence Server onVirtual Machine managedCisco TelePresenceConductor meet meconference evenwhenCiscoWebex Room Kit Pluswhich initiated theconference disconnects fromthe conference, as 'Keepconference alive' is set to'Yes', when both registeredto Cisco TelePresenceVideo CommunicationServer

Check theparticipation ofauto dialedparticipant SX80Codec whenCisco WebexRoom Kit Pluswhich initiatedthe meet meconferencedisconnectsfrom theconference




PassedDX80 (WirelessSharing) andMX200 G2 ->Unified CM -> SipTrunk ->TelePresenceConductor ->TelePresenceServer 7010 (Meetme conference)MX200 G2 ->Transfer -> UnifiedCM -> SX80Codec

Verify whether transferfrom Cisco TelePresenceMX200 G2 with remotelypaired Touch 10 to CiscoTelePresence SX80 Codecduringwireless sharing fromCisco Webex DX80 pairedto windows via CiscoProximity in a meet meconference via CiscoTelePresence Server 7010managed by CiscoTelePresence Conductor,endpoints registered toCisco UnifiedCommunications Managerworks successfully

Transfer fromMX200 G2 withremotely pairedTouch 10 toSX80 Codecduring wirelesssharing fromDX80 pairedwith windows ina meet meconference


PassedDX70 (WirelessSharing), SX10Quick Set, MX200G2 -> Cisco VCS-> Zone ->TelePresenceConductor ->TelePresenceServer 7010 (Meetme conference)

Verify wireless sharing fromMac paired to Cisco WebexDX70 during meet meconference via CiscoTelePresence Server 7010managed by CiscoTelePresence Conductoramong CiscoWebex DX70,Cisco TelePresence SX10Quick Set and CiscoTelePresence MX200 G2with remotely paired Touch10, all registered to CiscoTelePresence VideoCommunication Serverworks successfully

Wireless sharingfromMac pairedwith DX70 viaproximity in ameet meconferenceamong DX70,SX10 Quick Setand MX200 G2with remotelypaired Touch 10,all registeredwith Cisco VCS




PassedMX300 G2(Wireless Sharing),SX80 Codec,MX200 G2 ->Cisco VCS -> Zone-> TelePresenceConductor ->TelePresenceServer on VM(Meet meconference)MX200G2 (Remotelypaired) -> Transfer-> Cisco VCS ->DX80

Verify whether transferfrom Cisco TelePresenceMX200 G2 with remotelypaired Touch 10 to CiscoWebex DX80 duringwireless sharing from CiscoTelePresence MX300 G2paired to Mac via CiscoProximity in a meet meconference via CiscoTelePresence Server onVirtual Machine managedby Cisco TelePresenceConductor among CiscoTelePresence MX300 G2,Cisco TelePresence SX80Codec and CiscoTelePresence MX200 G2,all registered to CiscoTelePresence VideoCommunication Serverworks successfully

Transfer fromMX200 G2 withremotely pairedTouch 10 toDX80 duringwireless sharingfromMX300G2paired with Macin a meet meconferenceamong CiscoVCS registeredendpoints


PassedDX70 & WebexRoom Kit Plus ->Unified CM -> SipTrunk ->TelePresenceConductor ->TelePresenceServer on VM->Meetme conferenceMeet MeConference ->TelePresenceConductor ->Unified CM ->IX5000(PresentationSharing)

Verify whether presentationsharing from CiscoTelePresence IX5000whichis configured as auto dialedparticipant to meet meconference among CiscoWebex DX70 and CiscoWebex Room Kit Plus allregistered to Cisco UnifiedCommunications Manager,via Cisco TelePresenceServer 7010 managed byCisco TelePresenceConductor workssuccessfully

Checkpresentationsharing fromauto-dialedparticipantIX5000 in ameet meconference viaTelePresenceServer onVirtual Machine




PassedWebex Room Kit(Wirelesssharing)->Expressway-E->Expressway-C ->Unified CM -> SipTrunk ->TelePresenceConductor -> CiscoTS 7010 -> Meetme conferenceDX80, IX5000,MX200 G2 ->Unified CM -> SipTrunk ->TelePresenceConductor -> CiscoTS 7010 -> Meetme conference

Verify whether wirelesssharing from Cisco WebexRoom Kit registered inUnified CM via Mobile andRemote Access, paired withiOS via Cisco Proximity ina meet me conferenceamong CiscoWebex DX70,Cisco TelePresence IX5000and Cisco TelePresenceMX200 G2 registered toCisco UnifiedCommunications Manager,via Cisco TelePresenceServer 7010 managed byCisco TelePresenceConductor workssuccessfully

Check wirelesssharing fromWebex RoomKit registered inUnified CM viaMobile andRemote Accessin a meet meconferenceamong DX70,IX5000 andMX200 G2 viaTelePresenceServer 7010


PassedDX80-> UnifiedCM -> SX10 QuickSet DX80->Add ->Unified CM ->MRGL ->Conductor ->TelePresenceServer on VM ->DX70, MX200 G2DX80(WirelessSharing) -> MergeDX80 ->Hold/resume ->Unified CM ->MRGL ->Conductor ->TelePresenceServer on VM

Verify Hold/Resume fromCisco Webex DX80 duringwireless sharing paired withWindows via CiscoProximity in an Adhocconference with CiscoTelePresence SX10 QuickSet, Cisco TelePresenceMX200 G2 and CiscoWebex DX70, all registeredwith Cisco UnifiedCommunications Manager,via Cisco TelePresenceServer on Virtual Machinemanaged by CiscoTelePresence Conductorworks successfully

Hold/Resumeduring WirelessSharing fromDX80 pairedwith Windowsvia CiscoProximity in anAdhocconference viaTelePresenceServer on VM

UCJ12.5PHIIS.TS.G.001



PassedSX20 QuickSet(WirelessSharing), MX300G2, Cisco WebexRoom Kit Plus ->Unified CM -> SIPTrunk -> Conductor-> TelePresenceServer 7010 (Meetme conference)

Verify whether hold/resumefrom Cisco TelePresenceSX10 Quick Set duringwireless sharing fromwindows paired via CiscoProximity in a meet meconference via CiscoTelePresence Conductormanaged CiscoTelePresence Server 7010,among Cisco TelePresenceSX20 Quick Set, CiscoWebex DX80 and CiscoWebex Room Kit Plus, allregistered with CiscoUnified CommunicationsManager works successfully

Hold/Resumeduring wirelesssharing fromSX10 Quick Setpaired withwindows in ameet meconferenceamong SX20Quick Set,DX80 andCiscoWebex RoomKit Plus viaTelePresenceServer 7010


PassedDX70,SX10 QuickSet , MX200 G2,DX80 -> UnifiedCM -> Sip Trunk ->Conductor -> TS7010 -> Meet meconference(Wireless sharing)

Verify whether wirelesssharing from Cisco WebexDX80 paired with Mac viaCisco Proximity in a meetme conference among CiscoWebex DX70, CiscoTelePresence SX10 QuickSet, Cisco TelePresenceMX200 G2 all registered toCisco UnifiedCommunications Manager,via Cisco TelePresenceServer 7010 managed byCisco TelePresenceConductor workssuccessfully

Check wirelesssharing fromDX80 in a meetme conferenceamong DX70,SX10 Quick Setand MX200 G2via TelePresenceServer 7010


PassedDX80,SX10 QuickSet , MX200 G2, ->Unified CM -> SipTrunk -> Conductor-> TS 7010 ->Meetme conference

Verify whether LongDuration call in a meet meconference among CiscoWebex DX80, CiscoTelePresence SX10 QuickSet, Cisco TelePresenceMX200 G2 all registered toCisco UnifiedCommunications Manager,via Cisco TelePresenceServer 7010 managed byCisco TelePresenceConductor workssuccessfully

Long Durationcall in a meet meconferenceamong DX80,SX10 Quick Setand MX200 G2via TelePresenceServer 7010




PassedMeet MeConference ->TelePresenceConductor ->Unified CM ->SX10 Quick SetDX80-> UnifiedCM -> SIP Trunk-> Conductor ->TelePresenceServer onVM(Meetme conference)

Verify whether the autodialed participant CiscoTelePresence SX10 QuickSet continues to be in MeetMe Conference via CiscoTelePresence Server onVirtual Machine managedby Cisco TelePresenceConductor even when CiscoTelePresence SX10 QuickSet which initiated theconference disconnects fromthe conference, as 'Keepconference alive' is set to'Yes', when both registeredto Cisco UnifiedCommunications Manager

Check theparticipation ofauto dialedparticipant SX10Quick Set whenDX80 whichinitiated themeet meconferencedisconnectsfrom theconference


PassedDX70,SX20 QuickSet , MX200 G2,SX10 Quick Set ->Unified CM -> SipTrunk -> Conductor-> TS 7010 ->Meetme conference(Wireless sharing)

Verify whether wirelesssharing from CiscoTelePresence SX10 QuickSet paired with iOS viaCisco Proximity in a meetme conference among CiscoWebex DX70, CiscoTelePresence SX20 QuickSet, Cisco TelePresenceMX200 G2 all registered toCisco UnifiedCommunications Manager,via Cisco TelePresenceServer 7010 managed byCisco TelePresenceConductor workssuccessfully

Check wirelesssharing fromSX10 Quick Setin a meet meconferenceamong DX70,SX20 Quick Setand MX200 G2via TelePresenceServer 7010




PassedDX80-> UnifiedCM -> SX10 QuickSetDX80-> Add ->Unified CM ->MRGL ->Conductor ->TelePresenceServer on VM ->DX70, MX200G2DX80(WirelessSharing) -> MergeDX80 ->Hold/resume ->Unified CM ->MRGL ->Conductor ->TelePresenceServer on VM

Verify Hold/Resume fromCisco Webex DX80 duringwireless sharing paired withWindows Device via CiscoProximity in an Adhocconference with CiscoTelePresence SX10 QuickSet, Cisco TelePresenceMX200 G2 and CiscoWebex DX70, all registeredwith Cisco UnifiedCommunications Manager,via Cisco TelePresenceServer on Virtual Machinemanaged by CiscoTelePresence Conductorworks successfully

Hold/Resumeduring WirelessSharing fromDX80 pairedwith WindowsDevice via CiscoProximity in anAdhocconference viaTelePresenceServer on VM


PassedMX200 G2->Unified CM ->SX80CodecMX200 G2-> Add -> UnifiedCM -> MRGL ->Sip Trunk ->Conductor ->TelePresenceServer 7010->DX80, SX20Quick Set MX200G2 (PresentationSharing) ->Merge

Verify presentation sharingfrom Cisco TelePresenceMX200 G2 during Adhocconference with CiscoTelePresence SX80 Codec,Cisco Webex DX80andCisco TelePresence SX20Quick Set, all registeredwith Cisco UnifiedCommunications Managervia Cisco TelePresenceServer 7010 managed byCisco TelePresenceConductor workssuccessfully

Presentationsharing fromMX200 G2during Adhocconference viaTelePresenceServer 7010


PassedDX70,SX10 QuickSet , MX200 G2,DX80 -> UnifiedCM -> Sip Trunk ->Conductor -> TS7010 -> Meet meconference(Wireless sharing)

Verify whether wirelesssharing from Cisco WebexDX80 paired with Mac viaCisco Proximity in a meetme conference among CiscoWebex DX70, CiscoTelePresence SX10 QuickSet, Cisco TelePresenceMX200 G2 all registered toCisco UnifiedCommunications Manager,via Cisco TelePresenceServer 7010 managed byCisco TelePresenceConductor workssuccessfully

Check wirelesssharing fromDX80 in a meetme conferenceamong DX70,SX10 Quick Setand MX200 G2via TelePresenceServer 7010




PassedMX300 G2(Wireless Sharing),SX80 Codec, SX10Quick Set -> CiscoVCS -> Zone ->Conductor ->TelePresenceServer on VM(Meet meconference)MX200G2 (Remotelypaired) -> Transfer-> Cisco VCS ->DX80DX80>CiscoVCS -> Zone ->Conductor ->TelePresenceServer on VM(Meet me)

Verify whether transferfrom Cisco TelePresenceSX10 Quick Set withremotely paired CiscoTelePresence Touch 10 toCisco Webex DX80 duringwireless sharing from CiscoTelePresence MX300 G2paired to Mac via CiscoProximity in a meet meconference via CiscoTelePresence Server onVirtual Machine managedby Cisco TelePresenceConductor among CiscoTelePresence MX300 G2,Cisco TelePresence SX80Codec and CiscoTelePresence SX10 QuickSet , all registered to CiscoTelePresence VideoCommunication Serverworks successfully

Transfer fromSX10 Quick Setwith remotelypaired Touch 10to DX80 duringwireless sharingfromMX300G2paired with Macin a meet meconferenceamong CiscoVCS registeredendpoints


PassedMeet MeConference ->TelePresenceConductor ->Unified CM ->MX200 G2 DX70,Webex Room KitPlus,MX200 G2 ->Unified CM -> SipTrunk -> Conductor-> TS on VM->Meetme conference(Presentationsharing)

Verify whether presentationsharing from CiscoTelePresence MX200 G2which is configured as autodialed participant to meetme conference among CiscoWebex DX70 and CiscoWebex Room Kit Plus allregistered to Cisco UnifiedCommunications Manager,via Cisco TelePresenceServer 7010 managed byCisco TelePresenceConductor workssuccessfully

Checkpresentationsharing fromauto-dialedparticipantMX200 G2 in ameet meconference viaTelePresenceServer onVirtual Machine




PassedDX80-> UnifiedCM -> SX10 QuickSet DX80->Add ->Unified CM ->MRGL ->Conductor ->TelePresenceServer on VM ->DX70, MX200 G2DX80(WirelessSharing) -> MergeDX80 ->Hold/resume ->Unified CM ->MRGL ->Conductor ->TelePresenceServer on VM

Verify Hold/Resume fromCisco Webex DX80 duringwireless sharing paired withWindows via CiscoProximity in an Adhocconference with CiscoTelePresence SX10 QuickSet, Cisco TelePresenceMX200 G2 and CiscoWebex DX70, all registeredwith Cisco UnifiedCommunications Manager,via Cisco TelePresenceServer on Virtual Machinemanaged by CiscoTelePresence Conductorworks successfully

Hold/Resumeduring WirelessSharing fromDX80 pairedwith Windowsvia CiscoProximity in anAdhocconference viaTelePresenceServer on VM

UCJ12.5SEFT.TS.G.001

PassedDX80 -> UnifiedCM -> SX80CodecDX80 -> Add ->Unified CM ->MRGL -> SipTrunk -> Conductor-> TelePresenceServer 7010 ->MX200 G2, SX20Quick Set DX80(PresentationSharing)->Merge

Verify presentation sharingfrom Cisco Webex DX80during Adhoc conferencewith Cisco TelePresenceSX80 Codec, CiscoTelePresence MX200 G2and Cisco TelePresenceSX20 Quick Set, allregistered with CiscoUnified CommunicationsManager via CiscoTelePresence Server 7010managed by CiscoTelePresence Conductorworks successfully

Presentationsharing fromDX80 duringAdhocconference viaTelePresenceServer 7010




PassedSX20 QuickSet(WirelessSharing), MX300G2, Cisco WebexTeams Room KitPlus -> Unified CM-> SIP Trunk ->Conductor ->TelePresenceServer 7010 (Meetme conference)

Verify whether hold/resumefrom Cisco TelePresenceSX10 Quick Set duringwireless sharing fromwindows paired via CiscoProximity in a meet meconference via CiscoTelePresence Conductormanaged CiscoTelePresence Server 7010,among Cisco TelePresenceSX20 Quick Set, CiscoWebex DX80 and CiscoWebex Teams Room KitPlus, all registered withCisco UnifiedCommunications Managerworks successfully

Hold/Resumeduring wirelesssharing fromSX10 Quick Setpaired withwindows in ameet meconferenceamong SX20Quick Set,DX80 andCiscoRoom Kit Plusvia TelePresenceServer 7010


PassedMX300 G2(Wireless Sharing),SX80 Codec, SX10Quick Set -> CiscoVCS -> Zone ->Conductor ->TelePresenceServer on VM(Meet meconference)MX200G2 (Remotelypaired) -> Transfer-> Cisco VCS ->DX80DX80>CiscoVCS -> Zone ->Conductor ->TelePresenceServer on VM(Meet me)

Verify whether transferfrom Cisco TelePresenceSX10 Quick Set withremotely paired Touch 10 toCisco Webex DX80 duringwireless sharing from CiscoTelePresence MX300 G2paired to Mac via CiscoProximity in a Meet meconference via CiscoTelePresence Server onVirtual Machine managedby Cisco TelePresenceConductor among CiscoTelePresence MX300 G2,Cisco TelePresence SX80Codec and CiscoTelePresence SX10 QuickSet , all registered to CiscoTelePresence VideoCommunication Serverworks successfully

Transfer fromSX10 Quick Setwith remotelypaired Touch 10to DX80 duringwireless sharingfromMX300G2paired with Macin a meet meconferenceamong CiscoVCS registeredendpoints




PassedDX80,SX10 QuickSet , MX200 G2, ->Unified CM -> SipTrunk -> Conductor-> TS 7010 ->Meetme conference

Verify whether LongDuration call in a Meet meconference among CiscoWebex DX80, CiscoTelePresence SX10 QuickSet, Cisco TelePresenceMX200 G2 all registered toCisco UnifiedCommunications Manager,via Cisco TelePresenceServer 7010 managed byCisco TelePresenceConductor workssuccessfully

Long Durationcall in a meet meconferenceamong DX80,SX10 Quick Setand MX200 G2via TelePresenceServer 7010


PassedDX70,SX20 QuickSet , MX200 G2,SX10 Quick Set ->Unified CM -> SipTrunk -> Conductor-> TS 7010 ->Meetme conference(Wireless sharing)

Verify whether wirelesssharing from CiscoTelePresence SX10 QuickSet paired with iOS viaCisco Proximity in a Meetme conference among CiscoWebex DX70, CiscoTelePresence SX20 QuickSet, Cisco TelePresenceMX200 G2 all registered toCisco UnifiedCommunications Manager,via Cisco TelePresenceServer 7010 managed byCisco TelePresenceConductor workssuccessfully

Check wirelesssharing fromSX10 Quick Setin a meet meconferenceamong DX70,SX20 Quick Setand MX200 G2via TelePresenceServer 7010


Cisco TelePresence ConductorDefectsStatusCall Component



Test Results SummaryCisco TelePresence Conductor

PassedCisco Webex RoomKit & MX200 G2->Unified CM->TelePresenceConductor->TelePresence Serveron VM -> Full HDMeetingConference

Verify whether JapaneseMeeting name isdisplayed in CiscoWebex Room Kitregistered in CiscoUnifiedCommunicationsManager after joiningthe Full HD MeetingConferencemanaged byCisco TelePresenceServer on VM in CiscoTelePresence Conductor

Japanese Meetingname in CiscoWebex Room Kitafter joining theFull HD MeetingConferencemanaged byTelePresenceServer on VM inTelePresenceConductor

UCJ12.5SPH1.TC.G.001

PassedMX300 G2(Loggedin as EM user) &MX200 G2->Unified CM->TelePresenceConductor->TelePresence Serveron VM -> HDMeetingConference

Verify whether JapaneseMeeting name isdisplayed in ExtensionMobility User logged inCisco TelePresenceMX300G2 registered inCisco UnifiedCommunicationsManager after joiningthe HD MeetingConferencemanaged byCisco TelePresenceServer on VM in CiscoTelePresence Conductor

Japanese Meetingname in EM userlogged of MX300G2 after joining theHD MeetingConferencemanaged byTelePresenceServer on VM inTelePresenceConductor


PassedNAVerify whetherconference alias can becreated with JapaneseConference name for theconference managed byCisco TelePresenceServer on VM havingSDMeeting Template inCisco TelePresenceConductor

Create anconference alias forthe with JapaneseConference namehaving SDMeetingTemplate for theConference




PassedCisco Webex RoomKit& MX200 G2->Cisco VCS ->TelePresenceConductor->TelePresence Serveron VM -> Full HDMeetingConference

Verify whether JapaneseMeeting name isdisplayed in CiscoTelePresence CiscoWebex Room Kitregistered in CiscoTelePresence VideoCommunication Serverafter joining the Full HDMeeting Conferencemanaged by CiscoTelePresence Server onVM in CiscoTelePresence Conductor

Japanese Meetingname in CiscoVCSregistered CiscoWebex Room Kitafter joining theFull HD MeetingConferencemanaged byTelePresenceServer on VM inTelePresenceConductor


PassedMX200 G2(Loggedin as EM user) &DX80 ->UnifiedCM-> TelePresenceConductor->TelePresence Serveron VM -> SDMeetingConference

Verify whether JapaneseMeeting name isdisplayed in ExtensionMobility User logged inCisco TelePresenceMX200G2 registered inCisco UnifiedCommunicationsManager after joiningthe SD MeetingConferencemanaged byCisco TelePresenceServer on VM in CiscoTelePresence Conductor

Japanese Meetingname in EM userlogged in MX200G2 after joining theSD MeetingConferencemanaged byTelePresenceServer on VM inTelePresenceConductor


PassedCisco Webex RoomKit-> Unified CM-> SX20 Quick Set->Cisco WebexRoom Kit-> Add ->Unified CM ->MRGL(TelePresenceConductor) -> CiscoWebex Room KitPlus -> Merge→Cisco Webex RoomKit-> SharePresentation

Verify whetherpresentation can beshared from CiscoWebex Room Kit afterinitiating the AdhocConference with CiscoTelePresence SX20Quick Set and CiscoWebex Room Kit Plusmanaged by CiscoTelePresenceConductor,endpoints registered inCisco UnifiedCommunicationsManager

Presentationsharing in anAdhoc Conferencebetween WebexRoom Kit, SX20Quick Set andCisco WebexRoom Kit Plusregistered inUnified CM,managed byTelePresenceConductor in whichJapanese locale isselected




PassedCisco Webex RoomKit Plus (Host) ->Unified CM ->TelePresence Serveron VM ->TelePresenceConductor -> HDLecture ConferenceSX10 Quick Set(Guest) -> UnifiedCM -> TelePresenceServer on VM ->TelePresenceConductor -> HDLecture Conference

Verify whether CiscoWebex Room Kitregistered in CiscoUnifiedCommunicationsManager can join a HDLecture Conferencemanaged by CiscoTelePresence Server onVM in CiscoTelePresence Conductor

Joining a HDLecture Conferencefrom Cisco WebexRoom Kit Plusmanaged byTelePresenceServer on VM inTelePresenceConductor in whichJapanese locale isselected forconferences


PassedWebex RoomKit(Logged in asEM user) and DX80-> Unified CM ->TelePresence Serveron VM ->TelePresenceConductor -> FullHD MeetingConference WebexRoom Kit(Loggedin as EM user) ->Share Presentation

Verify whetherpresentation can beshared from ExtensionMobility user logged inCisco Webex Room Kitregistered in CiscoUnifiedCommunicationsManager after joiningthe Full HD MeetingConferencemanaged byCisco TelePresenceServer on VM in CiscoTelePresence Conductor

Presentationsharing from EMuser logged inCisco WebexRoom Kit afterjoining the Full HDMeetingConferencemanaged byTelePresenceServer on VM inTelePresenceConductor in whichJapanese locale isselected forconferences


PassedDX80 ->UnifiedCM-> PeerTelePresenceConductor->TelePresence Serveron VM -> Full HDMeetingConferenceFull HD MeetingConference ->TelePresenceConductor ->Unified CM ->MX200 G2(Pairedwith CiscoProximity forWindows) ->Presentation Sharing

Verify whetherpresentation can beshared wirelessly fromAuto Dialed participantCisco TelePresenceMX200G2 registered inCisco UnifiedCommunicationsManager after joiningthe Full HD MeetingConferencemanaged byCisco TelePresenceServer on VM in peerTelePresence Conductorwhen the primaryTelePresence Conductorgoes down

Wirelesspresentationsharing from AutoDialed participantMX200 G2 afterjoining the Full HDMeeting conferencemanaged byTelePresenceServer on VMmanaged by peerTelePresenceConductor after theprimary goes down




PassedNAVerify whether CiscoTelePresence Conductorcan be installed in ESXi6.5 host

DeployTelePresenceConductor XC4.3.2in ESXi 6.5 host

UCJ12.5PHIIS.TC.G.001

PassedMX200 G2 (Host)-> Unified CM ->TelePresenceConductor -> MCU5320 -> Full HDLectureConferenceMX300G2 (Guest) (Pairedwith Windows) ->Unified CM ->TelePresenceConductor -> MCU5320 -> Full HDLecture Conference-> Wireless Sharing

Verify whetherpresentation can beshared wirelessly fromCisco TelePresenceMX300G2 registered inCisco UnifiedCommunicationsManager when it joinsas an Guest participantto the Full HD LectureConference havingJapaneseMeeting name,managed by CiscoTelePresence MCU5320 in CiscoTelePresence Conductor

Wirelesspresentationsharing fromMX300 G2 when itjoins as an Guestparticipant to theFull HD LectureConference havingJapanese Meetingname, conferencemanaged by CiscoMCU 5320 inTelePresenceConductor


PassedMX300 G2 ->Unified CM -> PeerTelePresenceConductor ->TelePresence Serveron VM -> Full HDMeetingConferenceFull HDMeetingConference-> PeerTelePresenceConductor ->Unified CM ->Cisco Webex RoomKit Plus

Verify whether CiscoWebex Room Kit Pluscan join as an AutoDialed participant to theFull HD MeetingConference havingJapanese name for theMeeting Template,conference managed byCisco TelePresenceServer on VirtualMachine in peer CiscoTelePresence Conductorwhen the primary goesdown

Joining CiscoWebex Room KitPlus as an AutoDialed participantto the Full HDMeetingConference havingJapanese Name forthe Meetingtemplate,conferencemanaged byTelePresenceServer on VM inpeer TelePresenceConductor whenthe primary goesdown




PassedCisco Webex RoomKit Plus(Hold/Resume),SX10 Quick Set ->Unified CM ->TelePresenceConductor ->TelePresence Serveron VM -> Full HDLecture Conference

Verify whetherHold/Resume fromCisco Webex Room KitPlus registered in CiscoUnifiedCommunicationsManager after joiningthe Full HD LectureConferencemanaged byCisco TelePresenceServer on VirtualMachine in CiscoTelePresence Conductor

Hold/Resume fromCisco WebexRoomKit Plus afterjoining a Full HDLecture Conferencemanaged byTelePresenceServer on VM inTelePresenceConductor


PassedMX300 G2, SX20Quick Set-> UnifiedCM -> TelePresenceConductor -> CiscoMCU 5310 ->LectureConferenceLectureConference ->TelePresenceConductor ->Unified CM ->Cisco Webex RoomKit Plus

Verify whether CiscoWebex Room Kit Plusjoins as an Auto Dialedparticipant to theLecture Conferencemanaged by CiscoTelePresence MCU5310 in CiscoTelePresence Conductor

Joining CiscoWebex Room KitPlus as an AutoDialed participantto the LectureConferencemanaged by CiscoMCU 5310 inTelePresenceConductor


PassedDX80&MX200G2->Unified CM->TelePresenceConductor->TelePresence Serveron VM -> Full HDMeetingConference

Verify whether CiscoWebex DX80 registeredin Cisco UnifiedCommunicationsManager can join a FullHDMeeting Conferencemanaged by CiscoTelePresence Server onVM in CiscoTelePresence Conductor

Joining a Full HDMeetingConference fromDX80 managed byTelePresenceServer on VM inTelePresenceConductor

UCJ12.5SEFT.TC.G.001

PassedMX200G2&DX80->Unified CM->TelePresenceConductor->TelePresence Serveron VM -> HDMeetingConference

Verify whether CiscoTelePresnce MX200 G2registered in CiscoUnifiedCommunicationsManager can join a HDMeeting Conferencemanaged by CiscoTelePresence Server onVM in CiscoTelePresence Conductor

Joining a HDMeetingConference fromMX200 G2managed byTelePresenceServer on VM inTelePresenceConductor




PassedDX80 ->UnifiedCM-> TelePresenceConductor->TelePresence Serveron VM -> HDMeetingConferenceHDMeetingConference-> TelePresenceConductor ->Unified CM ->MX200 G2 ->Hold/Resume

Verify whetherHold/Resume fromCisco TelePresenceMX200G2 registered inCisco UnifiedCommunicationsManager after joining asan auto dialedparticipant to the HDMeeting Conferencemanaged by CiscoTelePresence Server onVM in CiscoTelePresence Conductor

Hold/Resume fromMX200 G2 afterjoining as an AutoDialed participantin the Full HDMeetingConferencemanaged byTelePresenceServer on VM inTelePresenceConductor


PassedDX80 & DX70->Unified CM->TelePresenceConductor-> CiscoMCU 5320 ->MeetingConference

Verify whether CiscoWebex DX80 registeredin Cisco UnifiedCommunicationsManager can join aMeeting Conferencemanaged byCiscoMCU5320 in CiscoTelePresence Conductor

Joining a MeetingConference fromDX80 managed byCisco MCU 5320in TelePresenceConductor


PassedDX80 & DX70->Unified CM->Peer TelePresenceConductor->TelePresence Serveron VM -> Full HDMeetingConference

Verify whether CiscoWebex DX80 registeredin Cisco UnifiedCommunicationsManager can join a FullHDMeeting Conferencemanaged by CiscoTelePresence Server onVM in peer CiscoTelePresence Conductorwhen primary CiscoTelePresence Conductoris down

Joining a Full HDMeetingConference fromDX80 managed byTelePresenceServer on VM inpeer TelePresenceConductor whenprimary is down




PassedDX80 & WebexTeams Room Kit->Unified CM->Peer TelePresenceConductor-> CiscoTS 7010 -> Full HDMeetingConference

Verify whether CiscoWebex TeamsRoomKitregistered in CiscoUnifiedCommunicationsManager can join a FullHDMeeting Conferencemanaged by CiscoTelePresence Server7010 in peer CiscoTelePresence Conductorwhen primary CiscoTelePresence Conductoris down

Joining a Full HDMeetingConference fromDX80 managed byCisco TS 7010 inpeer TelePresenceConductor whenprimary is down


Cisco TelePresence Management SuiteDefectsStatusCall

ComponentFlow


PassedCisco TMS ->Unified CM-> MRGL ->MCU5310 ->Webex RoomKit, DX70,SX80 Codec(One Buttonto Push)

Verify that user is able toSchedule One Button toPush conference betweenCisco Webex Room Kit,Cisco Webex DX70, CiscoTelePresence SX80 Codecregistered in Cisco UnifiedCommunications Managerusing Cisco TelePresenceMCU 5310

One Button to Pushscheduled videoconference amongWebex Room Kit,DX70 and SX80Codec using MCU5310 registered toUnified CM

UCJ12.5PH1S.TMS.G.001

PassedCisco TMS ->Unified CM-> MRGL ->MCU5310 ->SX80 Codec,DX70,WebexRoom Kit (IPbandwidth2048 kbps)

Verify that user is able toSchedule a One Button toPush Video Conferencewith Bandwidth set to 2048Kbps between CiscoTelePresence SX80 Codec,Cisco Webex Room Kit,Cisco Webex DX70registered in Cisco UnifiedCommunications Managerusing Cisco TelePresenceMCU 5310

Set Bandwidth as2048 kbps for OneButton to PushScheduled videoconference amongSX80 Codec, DX70and Webex RoomKit registered inUnified CM usingMCU 5310



Test Results SummaryCisco TelePresence Management Suite

PassedCisco TMS ->DX70 andWebex RoomKit -> UnifiedCM -> SipTrunk ->MeetingServer (CMS)

Check whether a newautomatic connect meetingcan be scheduledwith CiscoWebex DX70 and CiscoWebex RoomKit registeredin Cisco UnifiedCommunications Managervia Cisco Meeting Server

Schedule anAutomatic connectmeeting usingDX70, WebexRoom Kit usingCMS

UCJ12.5PHIIS.TMS.G.001

PassedCisco TMS(OBTP)(1920Kbps) ->DX70,WebexRoomKit andMX200G2 ->Unified CM-> Sip Trunk-> MeetingServer (CMS)

Check whether a new OneButton to Pushmeetingwith1920Kbps can be scheduledwith Cisco Webex RoomKit, Cisco TelePresenceMX200 G2 and CiscoWebex DX70 all registeredin Cisco UnifiedCommunications Managervia Cisco Meeting Server

Schedule a OBTPmeeting with IPBandwidth of 1920kbps using DX70,Webex Room Kitand MX200 G2using CMS


PassedCisco TMS ->Unified CM-> DX70,Webex RoomKit (OBTP)

Check whether OBTPSnooze/Remind Laternotification reflects in CiscoWebex DX70 when anOBTPmeeting is scheduledwith Cisco Webex RoomKit registered in CiscoUnified CommunicationsManager

Check OBTPSnooze/RemindLater notification inDX70 by schedulingOBTP meetingamong WebexRoom Kit


PassedNACheck for JapaneseCharacter support in CiscoWebex DX70 by Saving aContact Name in Japanesein Phonebook of CiscoTelePresence ManagementSuite

Check for JapaneseContact Namereflects in DX70added viaPhonebook in CiscoTMS


PassedCisco TMS ->Cisco VCS ->DX70 ->Webex RoomKit&MX300G2DX70 ->Cisco VCS ->MX300 G2

Check whether call fromCisco Webex DX70 toCiscoWebexRoomKit getsdiverted to CiscoTelePresence MX300 G2configured as Find Me inCisco TelePresence VideoCommunication Serverusing Cisco TelePresenceManagement Suite

Check call divertfrom Webex RoomKit to MX300 G2configured Find Mein Cisco VCS usingCisco TMS




PassedCisco TMS ->Cisco VCS ->DX70 ->Webex RoomKit&MX300G2 (20Seconds)DX70-> Cisco VCS->MX300G2

Check whether call fromCisco Webex DX70 toCiscoWebexRoomKit getsdiverted to CiscoTelePresence MX300 G2configured as Find Me inCisco TelePresence VideoCommunication Serverusing Cisco TelePresenceManagement Suite

Check call divert(timer 20 Seconds)from Webex RoomKit to MX300 G2configured Find Mein Cisco VCS usingCisco TMS


PassedNACheck user can upgradeCisco TelePresensceManagement Suite fromVersion 15.6 to 15.7successfully

Check upgradingCisco TMS from15.6 to 15.7


PassedNAVerify whether CiscoTelePresence ManagementSuite upgrades successfullywith .Net 4.7 Framework

Check support forDot.Net 4.7 packagefor Upgrading CiscoTMS from 15.6 to15.7


PassedNACheck the default time spanof Seven days list ofconferences list appearswhen clicked on RunDiagnosis option availablein Conference Diagnosispage of Cisco TelePresenceManagement Suite

Check default timespan of Seven daysconferenceinformationvisibility inConferenceDiagnostics page ofCisco TMS


PassedNACheck whether conferenceinformation from Start Dateto End Date reflects whenStart Date and End Date isopted and Run Diagnosis isclicked in ConferenceDiagnosis Page of CiscoTelePresence ManagementSuite

Check forConference Info byselecting Start Dateand End Date inConferenceDiagnostics page ofCisco TMS


PassedCisco TMS ->Unified CM->MX300G2, WebexRoom Kit,IX5000

Check whether conferenceinformation from Start Dateto End Date reflects whenStart Date and End Date isopted and Run Diagnosis isclicked in ConferenceDiagnosis Page of CiscoTelePresence ManagementSuite

Check JapaneseScheduledConference name isdisplaying inConferenceDiagnostics page ofCisco TMS usingStart Date and EndDate options




PassedNACheck whether CiscoMeeting Server integrationwith Cisco TelePresenceManagement Suite supportsDTMF tomes response forendpoints managed byCisco Meeting Server

Check DTMF tonessupport for CMSmanaged endpointsin Cisco TMS


PassedNACheck whether failedconference informationdisplays in ConferenceDiagnosis page of CiscoTelePresence ManagementSuite when Run Diagnosisoption is clicked onDiagnosis page

Check whetherfailed conferenceinformation reflectswhenRunDiagnosisoption is clicked inCisco TMS


PassedCisco TMS ->Unified CM-> IX5000,DX70,WebexRoom Kit(Automaticconference)

Check whether schedulingan One Button to Pushconference using CiscoTelePresence IX5000, CiscoWebex DX70 and CiscoWebex Room Kit displaysin Cisco TelePresenceIX5000,using CiscoTelePresence ManagementSuite

Check for SnoozeLater option inIX5000 in an OBTPconference withDX70 and WebexRoom Kit allregistered in UnifiedCM


PassedCisco TMS ->Unified CM-> IX5000,SX80 Codec(AutomaticConference)

Check whether JapaneseName given to automaticconference reflects in CiscoTelePresence Touch 10 ofCisco TelePresence IX5000among with CiscoTelePresence SX80 Codecregistered in Cisco UnifiedCommunications Managerusing Cisco TelePresenceManagement Suite

Check whetherJapanese Meetingname reflects inTouch 10 of IX5000when scheduled anautomaticconference withSX80 Codec usingCisco TMS


PassedNACheck whether Phonebookmapped to CiscoTelePresence IX5000 viaCisco TelePresenceManagement Suite reflectsin directory option of CiscoTelePresence Touch 10 ofCisco TelePresence IX5000

Check whetherContact list mappedto IX5000 via CiscoTMS reflects inDirectory option inTouch 10 of IX5000




PassedNACheck whether changesmade to Default IPBandwidth in theConference Settings pagereflects in New ConferencePage while Scheduling newconference in CiscoTelePresence ManagementSuite

Change Default IPBandwidth inconference settingsof Cisco TMS andcheck for the samein conferencescheduling page


PassedCisco TMS ->Unified CM->MX300G2, WebexRoom Kit,SX80 Codec

Check whether conferenceinformation from Start Dateto End Date reflects whenStart Date and End Date isopted and Run Diagnosis isclicked in ConferenceDiagnosis Page of CiscoTelePresence ManagementSuite

Give JapaneseScheduledConference name isdisplaying inConferenceDiagnostics page ofCisco TMS usingStart Date and EndDate options

UCJ12.5SEFT.TMS.G.001

PassedCisco TMS ->Cisco VCS ->SX80 Codec,DX70,MX300 G2(OBTPConference)

Check whether clicking onRemind Later optiondisplays Meetingnotification exactly before5 minutes Scheduledmeeting time of CiscoTelePresence SX80 Codecwith Cisco TelePresenceMX300 G2 and CiscoWebex DX70 all registeredin Cisco TelePresenceVideo CommunicationServer using CiscoTelePresence ManagementSuite

Check Snooze Latertiming of 5 minutesin SX80 Codec afterclicking RemindLater option inSX80 Codec inconference withMX300 G2 andDX70 all registeredin Cisco VCS


PassedNACheck the default time spanof Seven days list ofconferences list appearswhen clicked on RunDiagnosis option availablein Conference Diagnosispage of Cisco TelePresenceManagement Suite

Check default timespan of Seven daysconferenceinformationvisibility inConferenceDiagnostics page ofCisco TMS




PassedCisco TMS ->Unified CM-> SX80Codec,Webex RoomKit, MX300G2

Checkwhether an automaticconference scheduled usingCisco TelePresenceMX300G2, CiscoWebex RoomKitand Cisco TelePresenceSX80 Codec reflects inConference Diagnosticspage of Cisco TelePresenceManagement Suite

Schedule anautomaticconference usingMX300 G2, WebexRoomKit and SX80Codec and check forthe reflection ofconference inConferenceDiagnostics page ofCisco TMS


PassedNACheck whether conferenceinformation from Start Dateto End Date reflects whenStart Date and End Date isopted and Run Diagnosis isclicked in ConferenceDiagnosis Page of CiscoTelePresence ManagementSuite

Check forConference Info byselecting Start Dateand End Date inConferenceDiagnostics page ofCisco TMS


PassedCisco TMS ->Cisco VCS ->SX80 Codec,DX70,WebexRoom KitPlus(Automaticconference)

Check whether schedulingan One Button to Pushconference using CiscoTelePresence SX80 Codec,Cisco Webex DX70 andCisco Webex Room KitPlus displays in CiscoTelePresence IX5000,usingCisco TelePresenceManagement Suite

Check for SnoozeLater option inSX80 Codec in anOBTP conferencewith DX70 andWebex Room KitPlus all registered inCisco VCS


IX 5000DefectsStatusCall

ComponentFlow


PassedNACheck whether a Windowsdevice can be connected toCisco TelePresence IX5000for wireless sharing viaCisco Proximity afterupgrading the system tolatest IX version

Check localWireless Sharingfrom IX5000 viaWindows deviceconnected via CiscoProximity

UCJ12.5PH3S.IX8.G.001


Test Results SummaryIX 5000

PassedIX5000 (SharePresentation)-> Unified CM-> WebexRoom Kit

Check whether user canshare presentation fromWindows device connectedto Cisco TelePresenceIX5000 via Cisco Proximitywhile on call with CiscoWebex Room Kit bothregistered in Cisco UnifiedCommunications Manager

Check WirelessSharing fromWindows deviceconnected withIX5000 to WebexRoom Kit bothregistered in UnifiedCM


PassedNACheck whether user canupload 3rd party certificatein Cisco TelePresenceIX5000 via Web UserInterface after upgrading thesystem to latest IX version

Check uploading 3rdparty CACertificatefor IX5000 via WebUI


PassedNACheck for availability of 3rdparty certificate uploaded toCisco TelePresence IX5000via Web User Interface inthe list of certificates

Check foravailability ofuploaded 3rd partyCA certificate viaWeb UI in list ofcertificates inIX5000


PassedNACheck whether CiscoTelePresence IX5000system supports DTLSv1.0and DTLSv1.2 both bydefault by using thecommand

Check for defaultsupport for bothdtlsv1.0 and dtlsv1.2in IX5000


PassedNACheck whether executingthe command “Show dtlsversion” reflects the wholestatus of Cisco TelePresenceIX5000

Check for dtlsversion informationreflects when showdtls versioncommand isexecuted for IX5000


PassedIX5000(dtlsv1.0disabled) ->Unified CM ->Webex RoomKit

Checkwhether call connectsbetween Cisco TelePresenceIX5000 and Cisco WebexRoomKit both registered inCisco UnifiedCommunications Managerwhile dtlsv1.0 is disable inCisco TelePresence IX5000via command

Make a call fromIX5000 to WebexRoom Kit afterdisabling dtlsv1.0via Command bothregistered in UnifiedCM




PassedIX5000 (dtlsvdisabled) ->Unified CM ->Webex RoomKit

Check whether calldisconnects between CiscoTelePresence IX5000 andCisco Webex Room Kitwhen dtlsv1.0 disabled inCisco TelePresence IX5000while on call via commandboth registered in CiscoUnified CommunicationsManager

Check if callbetween IX5000 andWebex Room Kitends when dtlsv1.0disabled viacommand


PassedIX5000 ->Unified CM ->Webex RoomKitWebexRoom Kit(SharePresentation)

Check whether contentshared from Cisco WebexRoom Kit can be viewed inWindows device connectedto Cisco TelePresenceIX5000 via Cisco Proximityboth registered in CiscoUnified CommunicationsManager

View the contentshared from WebexRoom Kit inWindows deviceconnected to IX5000via Cisco Proximity


PassedIX5000 ->Unified CM ->Webex RoomKitIX5000(Add) ->Unified CM ->DX70IX5000(Share Screen)

Check whether user canshare presentation fromWindows device connectedto Cisco TelePresenceIX5000 via Cisco Proximityin a multisite conferencewith Cisco Webex RoomKit and CiscoWebex DX70all registered in CiscoUnified CommunicationsManager

Share presentationfrom Windowsdevice connected toIX5000 via CiscoProximity in amultisite conferencefrom IX5000registered in UnifiedCM


PassedIX5000 (AudioCall) ->Unified CM ->Webex RoomKit

Check call statusinformation in CiscoTelePresence Touch 10 ofIX5000 while on a audiocall with Cisco WebexRoomKit both registered inCisco UnifiedCommunications Manager

Check call statusinformationwhile anaudio call is initiatedfrom IX5000 toWebex Room Kitregistered in UnifiedCM


PassedIX5000 ->Unified CMCluster-1 ->SIP Trunk ->Unified CMCluster-2 ->Webex RoomKit (SharePresentation)

Check whether user canshare presentation fromCisco Webex Room Kitregistered in Cisco UnifiedCommunications ManagerCluster-1 to CiscoTelePresence IX5000registered in Cisco UnifiedCommunications Manager

Check sharingpresentation fromWebex Room Kit inan Intercluster callwith IX5000

UCJ12.5SEFT.IX8.G.001



PassedIX5000 ->Unified CM ->Webex RoomKit (JapaneseName)

Check On-Screen Displayof Cisco TelePresenceIX5000 for Japanese namegiven to CiscoWebexRoomKit while on a call bothregistered in Cisco UnifiedCommunications Manager

Check OSD ofIX5000 for JapaneseName Display giveto Webex Room Kitin a call bothregistered in UnifiedCM


PassedDX70 ->Unified CM ->IX5000IX5000(Transfer) ->Unified CM ->Webex RoomKit (EM User)

Check whether user cantransfer a call CiscoTelePresence IX500 toExtension Mobility user ofCisco Webex Room Kit allendpoints registered inCisco UnifiedCommunications Managerin Japanese Environment

Check call transferfrom IX5000 to EMUser of WebexRoom Kit inJapaneseEnvironment allregistered in UnifiedCM


PassedDX70 ->Unified CMCluster-1 ->IX5000IX5000(Transfer) ->Unified CMCluster-1 ->SIP Trunk ->Unified CMCluster -2 ->DX70

Check call from CiscoWebex DX70 to CiscoTelePresence IX5000registered in Cisco UnifiedCommunications ManagerCluster-1 can be transferredto Cisco Webex DX80registered in Cisco UnifiedCommunications ManagerCluster-2

Check InterclusterTransfer fromIX5000 to WebexDX80 registered intwo Unified CMClusters


PassedIX5000 ->Unified CM ->MX300G2IX5000(Add) ->Unified CM ->MX2000G2IX5000(Add) ->Unified CM ->Webex RoomKitIX5000 ->Hold andResume(MultipleTimes)

Check whether conferencecall continues even afterholding and resuming theconference multiple timesfrom Cisco TelePresenceIX5000 among with CiscoTelePresence MX200 G2,Cisco TelePresenceMX300G2 and Cisco Webex RoomKit all registered in CiscoUnified CommunicationsManager

Check multipletimes hold andresume from IX5000in a conference withMX200G2,MX300G2 and WebexRoom Kit allregistered in UnifiedCM




PassedIX5000 ->Unified CM ->SX20 QuickSet

Check the behavior ofCamera Coverage option ofCisco TelePresence IX5000while on call with CiscoTelePresence SX20 QuickSet both devices registeredin Cisco UnifiedCommunications Managerin Japanese Environment

Check Cameracoverage behaviorof IX5000 while oncall with SX20Quick Set registeredin Unified CM inJapaneseEnvironment


PassedIX5000 (iOSdevice) ->Unified CM ->Webex RoomKit (EM user)

Checkwhether call connectsfrom iOS device connectedto Cisco TelePresenceIX5000 to ExtensionMobility user of CiscoWebex Room Kit bothregistered in Cisco UnifiedCommunications Manager

Make a call fromiOS deviceconnected to IX5000to EM profile ofWebex Room Kitboth registered inUnified CM


PassedIX5000 (DualMonitor) ->Unified CM ->Webex RoomKit WebexRoom Kit ->SharePresentation

Check the behavior of DualScreen connected to CiscoTelePresence IX5000 whenshared content from CiscoWebex Room Kit bothregistered in Cisco UnifiedCommunications Manager

Check Presentationcontent in DualMonitor of IX5000when content sharedfrom Webex RoomKit both registeredin Unified CM


PassedIX5000 ->Unified CM ->DX70

Check System logs for anyCamera Errors in CiscoTelePresence IX5000 aftera call to CiscoWebexDX70both registered in CiscoUnified CommunicationsManager

Check System Logsof IX5000 for anyCamera Errors aftermaking a call toDX70 bothregistered in UnifiedCM


Cisco Unified Communication System Upgrade Test

Upgrade PathsCompatibilityCUPCUCCUCM9.1(2)

CUCM 9.1(2)compatibilitywith CUC9.1(2) and CUP 9.1(1)

9.1.1.10000-8 ->Upgrade to 12.5 viaPCD


9.1.2.10000-28-> Upgrade to12.5 via PCD

Base Release

12.5.0.99831-412.5.0.99832-712.5.0.99831-8Target Release


Test Results SummaryCisco Unified Communication System Upgrade Test

CompatibilityCUPCUCCUCM10.5(2)

CUCM 10.5(2)compatibilitywith CUC10.5(2) and CUP10.5(2)




Base Release

12.5.0.99831-412.5.0.99832-712.5.0.99831-8Target Release


CUCM 11.0(1)compatibility with CUC11.0(1) and CUP11.0.(1)




Base Release

12.5.0.99831-412.5.0.99832-712.5.0.99831-8Target Release


CUCM 11.5(1)compatibilitywithCUC11.5(1) and CUP11.5(1).


11.5.1.11900-26->Upgrade to 12.5 viaPCD


Base Release

12.5.0.99831-412.5.0.99832-712.5.0.99831-8Target Release

Before upgrading CUCM/CUC/CUP below 10.x to 12.5 we need to install the cop fileciscocm.version3-keys.cop.sgn.

Before upgrading CUP from 9.1.1 to 12.5, we need to install a COP file ciscocm.cup.pe_db_install.cop.sgn.

Before upgrading CUC from 9.x,10.x, 11.0,11.5.1 to 12.5 we need to install a COP fileciscocm.cuc_12.0_upgrade.cop.sgn

Note

COP-File download link:

https://software.cisco.com/download/home/285963825/type/282204704/release/COP-Files



COP-File installation Procedure:

The COP-File installation steps are as follows:

• Put the COP file on FTP or SFTP server so that the server that you are upgrading can access.• Log in to Cisco Unified Communications Operating System Administration.• Navigate to Software Upgrades > Install/Upgrade. The Software Installation/Upgrade window displays.• From the Source list, choose Remote File system.• In the Directory field, enter the path to the directory that contains the patch file on the remote system. Ifthe upgrade file is located on a Linux or Unix server, you must enter a forward slash (/) at the beginningof the directory path. For example, if the upgrade file is in the patches directory, you must enter /patches. If the upgrade file is located on a Windows server, remember that you are connecting to an FTP orSFTP server, so use the appropriate syntax. Begin the path with a forward slash and use forward slashes


Test Results SummaryUpgrade Paths




throughout the path. The path must start from the FTP or SFTP root directory on the server, so you cannotenter a Windows absolute path, which starts with a drive letter (for example, C:).

• In the Server field, enter the server name or IP address.• In the User Name field, enter the user name of the remote server.• In the User Password field, enter the password of the remote server.• Select the transfer protocol from the Transfer Protocol field.• To use the Email Notification feature, enter your Email Destination and SMTP server in the fieldsprovided.

• To continue the upgrade process, click Next.• Choose the upgrade version that you want to install and click Next.• In the next window, monitor the progress of the download.• If you want to install the upgrade and automatically reboot to the upgraded software, choose Switch tonew version after upgrade. The system restarts and runs the upgraded software.

• If you want to install the upgrade and then manually switch to the upgraded software at a later time,choose Do not switch to new version after upgrade. Click Next.

• When the installation completes, click Finish (not applicable for Refresh Upgrades).• To restart the system and activate the upgrade, choose Settings > Version then click Switch Version. Thesystem restarts running the upgraded software (not applicable for Refresh Upgrades).

Upgrade 9.1.2 to 12.5Upgrade 9.1.2 to 12.5

Target Release SetBase ReleaseProduct / Component

12.59.1.2.10000-28CUCM

12.5JP-9.1.2.1000-1CUCM Locale

12.59.1.2.10000-28CUC

12.5JP-9.1.2.1-10CUC Locale

12.59.1.1.10000-8CUP

12.5JP-9.1.1.1000-1CUP Locale

11.59.1.2SRST

15.7(3)M15.2(4)MVoice Gateway IOS

1211Jabber for Mac

129.1.1Jabber for iPhone

121.0.1Jabber for iPad

129.1.1Jabber for Android

1211Jabber for Windows

StatusCall ComponentFlow



Test Results SummaryUpgrade 9.1.2 to 12.5

PassedNilVerify whetherInstallation of CiscoUnifiedCommunicationsManager Publisher9.1(2) on UCScompletedsuccessfully

Installation ofUnified CM 9.1(2)Publisher on UCS

UC125S.UPGRADE.U.001

PassedNilVerify the Japaneselocale installedsuccessfully intoCisco UnifiedCommunicationsManager Publishersuccessfully.

Install Japaneselocale into UnifiedCM9.1(2) Publisher


PassedNilVerify whetherlicense is applied onthe Cisco UnifiedCommunicationsManager Publisher9.1(2) successfully

Apply license on theUnified CMPublisher 9.1(2)


PassedNilVerify whether theCisco UnifiedCommunicationsManager integratingwith ActiveDirectorysuccessfully.

Integrate the UnifiedCM with ActiveDirectory


PassedNilVerify whether SIPTrunk can be createdin the Cisco UnifiedCommunicationsManager Publisher9.1(2) successfully

Create SIP Trunk tointerop Site in theUnified CM 9.1(2)Publisher


PassedNilVerify whetherMGCPGateway canbe register in theCisco UnifiedCommunicationsManager from9.1(2)Publishersuccessfully

Register the MGCPGateway in theUnified CM 9.1(2)Publisher




PassedIP PhoneA -> SRST-> IP Phone B

Verify whether theSRST fallback isworking properly inCisco UnifiedCommunicationsManager 9.1(2) oncethe WAN outagehappenssuccessfully.

SRST fallbackshould workproperly once theWAN outagehappens.


PassedIP Phone A ->Unified CM-> IPPhone B -> UnifiedCM -> IP Phone C

Verify whether 99xxCisco IP Phoneswhich is registeredwith Cisco UnifiedCommunicationsManager 9.1(2) canable to make aconference callsuccessfully

Conference callwithin three 99xx IPPhones registeredwith Unified CM9.1(2)


PassedIP Phone A ->Unified CM -> IPPhone B

Verifying whetherCisco IP Phoneswhich is registeredwith Cisco UnifiedCommunicationsManager 9.1(2) canable to hold andresume the callsuccessfully

Hold and Resumethe call between IPPhones registeredwith Unified CM9.1(2)


PassedIP Phone A ->Unified CM -> IPPhone B -> UnifiedCM -> IP Phone C

Verifying whethercalls coming toCisco IP Phoneforwardingsuccessfully todestination whileusing Call ForwardAll Featureregistered withCisco UnifiedCommunicationsManager 9.1(2)

Forward the callscoming to Cisco IPPhone using CallForward All Featureregistered withUnified CM 9.1(2)





Verify whether userable to park anactive call on CiscoIP Phone andretrieve the parkedcall on anotherCisco IP Phonesuccessfully whenregistered withCisco UnifiedCommunicationsManager 9.1(2)

Park an active callon Cisco IP Phoneregistered withUnified CM 9.1(2)


PassedIP Phone A ->Unified CM-> IPPhone B

Verify whether usercan able to makecall from 99xxCiscoIP Phone to anyother Cisco IPPhone using SpeedDial Buttonregistered withCisco UnifiedCommunicationsManager 9.1(2)

Place call from 99xxCisco IP Phoneusing Speed DialButton registeredwith Unified CM9.1(2)



Verify whether userable to attend sharedline call in 99xxCisco IP Phonesuccessfullyregistered withCisco UnifiedCommunicationsManager 9.1(2)

Attend shared linecall in 99xx Cisco IPPhone registeredwith Unified CM9.1(2)



Verify whetherability to make abasic call Cisco IPPhone to Cisco IPPhone after logginginto the CiscoUnified CallManager 9.1(2)Extension Mobilitysuccessfully

Call FunctionalitybetweenBasic CiscoIP Phone to Cisco IPPhone after Logginginto EM of UnifiedCM 9.1(2)




PassedNilVerify whetherbackup can be takenfrom the CiscoUnifiedCommunicationsManager Publisherand Subscriber viaDisaster RecoverySystem successfully

Backup should betaken from theUnified CM 9.1(2)Publisher as well assubscriber


PassedNilVerify whetherUpgrade of CiscoUnifiedCommunicationsManager 9.1(2)Publisher to CiscoUnifiedCommunicationsManager 12.5 viaPrime CollaborationDeploymentsuccessfully

Upgrade UnifiedCM9.1(2) Publisherto Unified CM 12.5via PrimeCollaborationDeployment.


PassedNilVerify whether theLicense validationafter upgrade fromCisco UnifiedCommunicationsManager Publisher9.1(2) to CiscoUnifiedCommunicationsManager 12.5 viaPrime CollaborationDeployment.

License validationafter upgrade fromUnified CMPublisher 9.1(2) toUnified CM12.5 viaPrime CollaborationDeployment


PassedNilVerify whetherLDAP synchronizeduser should be in theCisco UnifiedCommunicationsManager after theupgrade has beendone successfully.

LDAP synchronizeduser should be in theUnified CMafter theupgrade has beendone.


PassedNilVerify the MGCPGatewayRegistration afterthe upgrade of CiscoUnifiedCommunicationsManager from9.1(2)to 12.5 successfully

MGCP GatewayRegistration statusafter upgrade hasbeen done.




PassedNilVerify whether SIPTrunk Creationshould be replicatedin the Cisco UnifiedCommunicationsManager afterupgrade has beendone successfully.

SIP Trunk Creationshould be replicatedin the Unified CMafter upgrade hasbeen done



Verify whether theSRST fallback isworking properlyafter upgrade of theCisco UnifiedCommunicationsManager from9.1(2)to 12.5 successfully.

SRST fallback afterupgrade of theUnified CM from9.1(2) to 12.5



Verify whether theconference call canbe establishedbetween Cisco IPPhones after theupgrade of CiscoUnifiedCommunicationsManager from9.1(2)to 12.5 successfullyvia PrimeCollaborationDeployment

Establish aconference callwithin three IPPhones after theupgrade of UnifiedCM 9.1(2) to 12.5via PrimeCollaborationDeployment



Verifying whetherCisco IP Phones canable to hold andresume the callsuccessfully afterthe upgrade of CiscoUnifiedCommunicationsManager from9.1(2)to 12.5 via PrimeCollaborationDeployment

Hold and Resumethe call between IPPhones after theupgrade of UnifiedCM from 9.1(2) to12.5 via PrimeCollaborationDeployment





Verifying whethercalls coming toCisco IP Phoneforwardingsuccessfully todestination whileusing Call ForwardAll Feature after theupgrade of CiscoUnifiedCommunicationsManager from9.1(2)to 12.5 via PrimeCollaborationDeployment

Forward the callscoming to Cisco IPPhone using CallForward All Featureafter upgrade ofUnified CM 9.1(2)to 12.5 via PrimeCollaborationDeployment



Verify whether userable to park anactive call on CiscoIP Phone andretrieve the parkedcall on anotherCisco IP Phonesuccessfully afterthe upgrade of CiscoUnifiedCommunicationsManager from9.1(2)to 12.5 via PrimeCollaborationDeployment

Park an active callon Cisco IP Phoneafter upgrade ofUnified CM 9.1(2)to 12.5 via PrimeCollaborationDeployment



Verify whether usercan able to makecall from 99xxCiscoIP Phone to anyother Cisco IPPhone using SpeedDial Button after theupgrade of CiscoUnifiedCommunicationsManager from9.1(2)to 12.5 via PrimeCollaborationDeployment

Place call from 99xxCisco IP Phoneusing Speed DialButton after upgradeof Unified CM9.1(2) to 12.5 viaPrime CollaborationDeployment





Verify whether userable to attend sharedline call in 99xxCisco IP Phonesuccessfully afterthe upgrade of CiscoUnifiedCommunicationsManager from9.1(2)to 12.5 via PrimeCollaborationDeployment

Attend shared linecall in 99xx Cisco IPPhone after upgradeof Unified CM9.1(2) to 12.5 viaPrime CollaborationDeployment



Verify whether userable to make a basiccall from Cisco IPPhone to Cisco IPPhone after logginginto the ExtensionMobilitysuccessfully afterthe upgrade of CiscoUnifiedCommunicationsManager from9.1(2)to 12.5 via PrimeCollaborationDeployment

Call FunctionalitybetweenBasic CiscoIP Phone to Cisco IPPhone after Logginginto EM afterupgradeUnifiedCM9.1(2) to 12.5 viaPrime CollaborationDeployment


PassedNilVerify whetherInstant Messagingon Jabber forWindows workingfine after upgradefrom Cisco UnifiedCommunicationsManager 9.1(2) to12.5 successfully

The InstantMessaging onJabber for Windowsafter upgrade fromUnified CM 9.1(2)to 12.5


PassedNilVerify whetherbackup can be takenfrom the CiscoUnifiedCommunicationsManager 12.5Publisher andSubscriber viaDisaster RecoverySystem successfully

Backup should betaken from theUnified CM 12.5Publisher as well assubscriber






12.510.5.2.10000-5CUCM

12.5JP-10.5.2.1000-1CUCM Locale

12.510.5.2.10000-5CUC


12.510.5.2.10000-9CUP

12.5JP-10.5.2.1000-1CUP Locale

11.510.5SRST

15.7(3)M15.2(4)MVoice Gateway IOS

1211.1Jabber for Mac

1211Jabber for iPhone

129.1Jabber iPad

1211Jabber for Android








Install Japaneselocale into UnifiedCM 10.5(2)Publisher













PassedNilVerify whetherMGCPGateway canbe register in theCisco UnifiedCommunicationsManager from10.5(2) Publishersuccessfully




Verify whether theSRST fallback isworking properly inCisco UnifiedCommunicationsManager 10.5(2)once the WANoutage happenssuccessfully.





















Upgrade UnifiedCM 10.5(2)Publisher to UnifiedCM 12.5 via PrimeCollaborationDeployment.










PassedNilVerify the MGCPGatewayRegistration afterthe upgrade of CiscoUnifiedCommunicationsManager from10.5(2) to 12.5successfully







Verify whether theSRST fallback isworking properlyafter upgrade of theCisco UnifiedCommunicationsManager from10.5(2) to 12.5successfully.




Verify whether theconference call canbe establishedbetween Cisco IPPhones after theupgrade of CiscoUnifiedCommunicationsManager from10.5(2) to 12.5successfully viaPrime CollaborationDeployment






Verifying whetherCisco IP Phones canable to hold andresume the callsuccessfully afterthe upgrade of CiscoUnifiedCommunicationsManager from10.5(2) to 12.5 viaPrime CollaborationDeployment




Verifying whethercalls coming toCisco IP Phoneforwardingsuccessfully todestination whileusing Call ForwardAll Feature after theupgrade of CiscoUnifiedCommunicationsManager from10.5(2) to 12.5 viaPrime CollaborationDeployment




Verify whether userable to park anactive call on CiscoIP Phone andretrieve the parkedcall on anotherCisco IP Phonesuccessfully afterthe upgrade of CiscoUnifiedCommunicationsManager from10.5(2) to 12.5 viaPrime CollaborationDeployment






Verify whether usercan able to makecall from 78xxCiscoIP Phone to anyother Cisco IPPhone using SpeedDial Button after theupgrade of CiscoUnifiedCommunicationsManager from10.5(2) to 12.5 viaPrime CollaborationDeployment




Verify whether userable to attend sharedline call in 78xxCisco IP Phonesuccessfully afterthe upgrade of CiscoUnifiedCommunicationsManager from10.5(2) to 12.5 viaPrime CollaborationDeployment




Verify whether userable to make a basiccall from Cisco IPPhone to Cisco IPPhone after logginginto the ExtensionMobilitysuccessfully afterthe upgrade of CiscoUnifiedCommunicationsManager from10.5(2) to 12.5 viaPrime CollaborationDeployment













12.511.0.1.10000-10CUCM

12.5JP-11.0.1.1000-1CUCM Locale

12.511.0.1.10000-10CUC


12.511.0.1.10000-6CUP

12.5JP-11.0.1.1000-1CUP Locale

11.511SRST

15.7(3)M15.4(2)TVoice Gateway IOS

12.011.5.2Jabber for Mac

12.011.5.0Jabber for iPhone

12.011Jabber for iPad

12.011.5.2Jabber for Android

12.011.8Jabber for Windows













12.511.5.1.11900-26CUCM

12.5JP-11.5.1.1000-1CUCM Locale

12.511.5.1.11900-26CUC


12.511.5.1.11900-21CUP

12.5JP-11.5.1.1000-1CUP Locale

11.710.5SRST

15.7(3)M15.4(2)TVoice Gateway IOS

1211.1Jabber for Mac

1211Jabber for iPhone

129.1Jabber for iPad

1211Jabber for Android












Related DocumentationCisco Unified Communications Manager Express

Release Notes

https://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucme/release/notes/CME_ReleaseNotes_12_3.html

https://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucme/requirements/guide/cme123spc.html

Administration Guide:

https://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucme/admin/configuration/manual/cmeadm.html

RoadMap

https://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucme/admin/configuration/manual/cmeadm/cmeroad.pdf

Configuration Guide:


Cisco ATA 191:

Release Notes:

https://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cata/191/firmware/12-0-1/release_notes/at91_b_release-notes-cisco-ata-191.html

Cisco Webex Teams

https://collaborationhelp.cisco.com/article/en-us/mqkve8


Test Results SummaryRelated Documentation

https://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucme/release/notes/CME_ReleaseNotes_12_3.html

https://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucme/requirements/guide/cme123spc.html







https://collaborationhelp.cisco.com/article/en-us/mqkve8

Cisco Webex Meetings

https://collaborationhelp.cisco.com/article/en-us/nkmwczu

Cisco Webex Room OS

Release Notes:

https://collaborationhelp.cisco.com/article/en-us/n4lhv2s

Cisco Webex Board 55

Release Notes:

https://collaborationhelp.cisco.com/article/en-us/DOC-19721

Cisco Webex Room Kit:

Release Notes:

https://www.cisco.com/c/dam/en/us/td/docs/telepresence/endpoint/software/ce9/release-notes/ce-software-release-notes-ce9.pdf

Administrator Guide:

https://www.cisco.com/c/dam/en/us/td/docs/telepresence/endpoint/ce94/room-kit-administrator-guide-ce94.pdf

Installation Guide:

https://www.cisco.com/c/dam/en/us/td/docs/telepresence/endpoint/room-kit/installation-guide/cisco-webex-room-kit-installation-guide-multilingual.pdf

API Reference Guide:

https://www.cisco.com/c/dam/en/us/td/docs/telepresence/endpoint/ce90/room-kit-api-reference-guide-ce90.pdf

Cisco Meeting Server

Deployment Guide

https://www.cisco.com/c/dam/en/us/td/docs/conferencing/ciscoMeetingServer/Deployment_Guide/Version-2-4/Cisco-Meeting-Server-2-4-Single-Combined-Server-Deployment.pdf

Certificate Guidelines

https://www.cisco.com/c/dam/en/us/td/docs/conferencing/ciscoMeetingServer/Deployment_Guide/Version-2-4/Certificate-Guidelines-Single-Combined-Server-Deployment-2-4.pdf

Release Notes:

https://www.cisco.com/c/dam/en/us/td/docs/conferencing/ciscoMeetingServer/Release_Notes/Version-2-4/Cisco-Meeting-Server-Release-Notes-2-4-1.pdf

Cisco Meeting App(WebRTC)

Release Notes:

https://www.cisco.com/c/dam/en/us/td/docs/conferencing/ciscoMeetingApps/Release_Notes/Release_Notes_CMA_1_11_3_webRTC.pdf



https://collaborationhelp.cisco.com/article/en-us/nkmwczu

https://collaborationhelp.cisco.com/article/en-us/n4lhv2s

https://collaborationhelp.cisco.com/article/en-us/DOC-19721



https://www.cisco.com/c/dam/en/us/td/docs/telepresence/endpoint/ce94/room-kit-administrator-guide-ce94.pdf



https://www.cisco.com/c/dam/en/us/td/docs/telepresence/endpoint/ce90/room-kit-api-reference-guide-ce90.pdf









Cisco Meeting App(Desktop)

Release Notes:

https://www.cisco.com/c/dam/en/us/td/docs/conferencing/ciscoMeetingApps/Release_Notes/Release_Notes_CMA_1_11_3_desktop.pdf

Cisco Meeting App(iOS)

Release Notes:

https://www.cisco.com/c/dam/en/us/td/docs/conferencing/ciscoMeetingApps/Release_Notes/Release_Notes_CMA_iOS_1_11_3.pdf

Cisco Meeting Management

Installation Guide:

https://www.cisco.com/c/dam/en/us/td/docs/conferencing/Cisco-Meeting-Management/Installation/Cisco-Meeting-Management-1-1-Installation-and-Configuration-Guide.pdf

Release Notes:

https://www.cisco.com/c/dam/en/us/td/docs/conferencing/Cisco-Meeting-Management/Release-Notes/Cisco-Meeting-Management-1-1-Release-Notes.pdf

End User Guide

https://www.cisco.com/c/dam/en/us/td/docs/conferencing/Cisco-Meeting-Management/User-Guide/Cisco-Meeting-Management-1-1-User-Guide-Video-Operator.pdf

Cisco TelePresence Management Suite


https://www.cisco.com/c/dam/en/us/td/docs/telepresence/infrastructure/tms/admin_guide/Cisco-TMS-Admin-Guide-15-7.pdf

Installation Guide:

https://www.cisco.com/c/dam/en/us/td/docs/telepresence/infrastructure/tms/install_guide/Cisco-TMS-install-guide-15-7.pdf

Release Notes:

https://www.cisco.com/c/dam/en/us/td/docs/telepresence/infrastructure/tms/release_note/Cisco-TMS-release-notes-15-7.pdf


https://www.cisco.com/c/dam/en/us/td/docs/telepresence/infrastructure/tmsba/Cisco-TMSBA-API-guide-15-7.pdf

Cisco TelePresence Conductor

Administration Guide

https://www.cisco.com/c/dam/en/us/td/docs/telepresence/infrastructure/conductor/admin_guide/TelePresence-Conductor-Admin-Guide-XC4-3-3.pdf

Installation Guide:























https://www.cisco.com/c/dam/en/us/td/docs/telepresence/infrastructure/conductor/install_guide/TelePresence-Conductor-Virtual-Machine-Install-Guide-XC4-2.pdf

Release Notes:

https://www.cisco.com/c/dam/en/us/td/docs/telepresence/infrastructure/conductor/release_note/TelePresence-Conductor-Release-Notes-XC4-3-3.pdf


https://www.cisco.com/c/dam/en/us/td/docs/telepresence/infrastructure/conductor/api_guide/TelePresence-Conductor-API-Guide-XC4-3-1.pdf

Cisco TelePresence Server


https://www.cisco.com/c/dam/en/us/td/docs/telepresence/infrastructure/ts/admin_guide/Cisco-TelePresence-Server-Printable-Help-4-4-1-24-Virtual-Machine.pdf

https://www.cisco.com/c/dam/en/us/td/docs/telepresence/infrastructure/ts/admin_guide/Cisco-TelePresence-Server-Printable-Help-4-4-1-24-Remotely-Managed.pdf

Installation Guide:

https://www.cisco.com/c/dam/en/us/td/docs/telepresence/infrastructure/ts/install_guide/Cisco_TelePresence_Server_7010_Installation_Guide.pdf

https://www.cisco.com/c/dam/en/us/td/docs/telepresence/infrastructure/ts/install_guide/Cisco-TelePresence-Server-on-Virtual-Machine-Install-Guide-4-4.pdf

Release Notes:

https://www.cisco.com/c/dam/en/us/td/docs/telepresence/infrastructure/ts/release_note/Cisco-TelePresence-Server-Software-Release-Notes-4-4-1-24.pdf


https://www.cisco.com/c/dam/en/us/td/docs/telepresence/infrastructure/ts/api_guide/Cisco-TelePresence-Server-API-reference-4-4-1-16.pdf

Cisco VCS Expressway Series:


https://www.cisco.com/c/dam/en/us/td/docs/voice_ip_comm/expressway/admin_guide/Cisco-Expressway-Administrator-Guide-X8-10.pdf

Release Notes:

https://www.cisco.com/c/dam/en/us/td/docs/telepresence/infrastructure/vcs/release_note/Cisco-VCS-Release-Note-X8-11-4.pdf

Installation Guide:

https://www.cisco.com/c/dam/en/us/td/docs/voice_ip_comm/expressway/install_guide/Cisco-Expressway-Virtual-Machine-Install-Guide-X8-11-1.pdf

Cisco TelePresence Multipoint Control Unit

Cisco TelePresence MCU 5320




























https://www.cisco.com/c/dam/en/us/td/docs/telepresence/infrastructure/mcu/admin_guide/cisco_telepresence_mcu_5300_series_administration_guide_4-3_2-17.pdf

Installation Guide:

https://www.cisco.com/c/dam/en/us/td/docs/telepresence/infrastructure/mcu/install_guide/Cisco_TelePresence_MCU_53x0_Installation_Guide.pdf

Release Notes:

https://www.cisco.com/c/dam/en/us/td/docs/telepresence/infrastructure/mcu/release_note/Cisco-TelePresence-MCU-Software-release-notes-4-5-1-98.pdf


https://www.cisco.com/c/dam/en/us/td/docs/telepresence/infrastructure/mcu/api_guide/MCU-API-2-11.pdf



https://www.cisco.com/c/dam/en/us/td/docs/telepresence/infrastructure/mcu/admin_guide/Cisco-TelePresence-MCU-Series-Printable-Online-Help-4-5_1-71.pdf

Installation Guide:

https://www.cisco.com/c/dam/en/us/td/docs/telepresence/infrastructure/mcu/install_guide/mcu_deployment_guide_4-5.pdf

Release Notes:







Deployment Guide:


Release Notes:


Cisco TelePresence SX10 Quick Set:


https://www.cisco.com/c/dam/en/us/td/docs/telepresence/endpoint/ce95/sx10-administrator-guide-ce95.pdf
























https://www.cisco.com/c/dam/en/us/td/docs/telepresence/endpoint/ce95/collaboration-endpoint-software-api-reference-guide-ce95.pdf

Installation Guide:

https://www.cisco.com/c/dam/en/us/td/docs/telepresence/endpoint/sx-series/installation-guide/sx10-quick-set-installation-guide-en.pdf

Release Notes:


Cisco Webex DX80:

Release Notes:



https://www.cisco.com/c/dam/en/us/td/docs/telepresence/endpoint/ce95/dx70-dx80-administrator-guide-ce95.pdf



Installation Guide:

https://www.cisco.com/c/dam/en/us/td/docs/voice_ip_comm/dx/dx80/install/dx80-installation-guide-web-version.pdf

Cisco TelePresence SX80 Codec

Administration Guide:-


Installation Guide:-

https://www.cisco.com/c/dam/en/us/td/docs/telepresence/endpoint/sx-series/installation-guide/sx80-installation-sheet.pdf

API Reference Guide:-


Release Notes:-


Cisco TelePresence DX70



Release Notes:-


























https://www.cisco.com/c/dam/en/us/td/docs/telepresence/endpoint/ce95/dx70-dx80-sx10-sx20-sx80-mx200g2-mx300g2-mx700-mx800-room-kit-getting-started-guide-ce95.pdf

Cisco TelePresence MX200 G2


https://www.cisco.com/c/dam/en/us/td/docs/telepresence/endpoint/ce95/mx200g2-mx300g2-administrator-guide-ce95.pdf

Release Notes::-



https://www.cisco.com/c/dam/en/us/td/docs/telepresence/endpoint/mx-series/installation_guide/mx200-g2-floorstand-installation-sheet.pdf

https://www.cisco.com/c/dam/en/us/td/docs/telepresence/endpoint/mx-series/installation_guide/mx200-g2-wallmount-installation-sheet.pdf



Cisco TelePresence MX300 G2



Release Notes::-






Cisco TelePresence IX5000


https://www.cisco.com/c/en/us/td/docs/telepresence/ix_sw/8_x/admin/guide/ix_8_admin_guide.pdf

Release Notes::-

























https://www.cisco.com/c/en/us/td/docs/telepresence/ix_sw/8_x/admin/guide/ix_8_admin_guide.pdf

https://www.cisco.com/c/en/us/td/docs/telepresence/ix_sw/8_x/release/notes/ix_release_notes.html


https://www.cisco.com/c/dam/en/us/td/docs/telepresence/ix5000/assembly_guide/ix5000_install_guide.pdf



https://www.cisco.com/c/en/us/td/docs/telepresence/ix_sw/8_x/release/notes/ix_release_notes.html

https://www.cisco.com/c/dam/en/us/td/docs/telepresence/ix5000/assembly_guide/ix5000_install_guide.pdf

test results for cisco collaboration systems release 12.5 ... › c › dam › m › ja_jp ›...

Documents