TESTREPORT

ReportNo.:D6386.01­301­47

Renderedto:

CRLAURENCECO.,INC.

Vernon,California

SERIES/MODEL:900

PRODUCTTYPE:DoubleArchitecturalTerraceDoor(In­Swing)

SPECIFICATION: AAMA/WDMA/CSA101/I.S.2/A440­08,NAFS­NorthAmerican

FenestrationStandard/SpecificationforWindows,Doors,andSkylights

Title SummaryofResults

PrimaryProductDesignatorClassAW– PG40:SizeTested1829x

2439 mm(72x96in.)–TypeATD

DesignPressure ±1920 Pa(±40.10 psf)

AirInfiltration 0.5 L/s/m2 (0.10 cfm/ft2)

WaterPenetrationResistanceTestPressure 390 Pa(8.15 psf)

TestCompletionDate: 08/22/2014

ReferencemustbemadetoReportNo.D6386.01­301­47,dated10/08/14forcompletetest

specimendescriptionanddetailedtestresults.

��������������� ���������������

��� ������������������ �������������

�������� � ���!��� ������" �� �#���!$% "&'"(

TestReportNo.:D6386.01­301­47

ReportDate:10/08/14

TestRecordRetentionEndDate:08/22/18

Page1of9

1.0 ReportIssuedTo: CRLaurenceCo.,Inc.

2100East38thStreet

Vernon,California90058

2.0 TestLaboratory: ArchitecturalTesting,Inc.

4RanchoCircle

LakeForest,California92630

949­460­9600

3.0 ProjectSummary:

3.1 Series/Model:900

3.2 ProductType:DoubleArchitecturalTerraceDoor(In­Swing)

3.3 ComplianceStatement: Resultsobtainedaretestedvaluesandweresecuredby

using the designated test method(s). The specimen tested successfully met the

performancerequirementsforaClassAW–PG40:SizeTested1829x2439mm

(72x96in.)–TypeATD rating.

3.4 TestDates:08/14/2014–08/22/2014

3.5 TestLocation: C.R.Laurence'stestfacilityinLosAngeles,California.Calibration

of test equipment was performed by Architectural Testing in accordance with

AAMA 205­01 "In­Plant Testing Guidelines for Manufacturers and Independent

Laboratories".

3.6 Test Sample Source: The test specimen was provided by the client.

Representative samples of the test specimen will be retained by Architectural

Testingforaminimumoffouryearsfromthetestcompletiondate.

3.7 Drawing Reference: The test specimen drawings have been reviewed by

ArchitecturalTestingandarerepresentativeofthetestspecimensreportedherein.

TestspecimenconstructionwasverifiedbyArchitecturalTestingperthedrawings

locatedinAppendixC.Anydeviationsaredocumentedhereinoronthedrawings.

3.8 ListofOfficialObservers:

Name Company

MarcoRamirez CRLaurenceCo.,Inc.

JarodS.Hardman ArchitecturalTesting,Inc.

��������������� ���������������

��� ������������������ �������������

�������� � ���!��� ������" �� �#���!$% "&'"(

TestReportNo.:D6386.01­301­47

ReportDate:10/08/14

TestRecordRetentionEndDate:08/22/18

Page2of9

4.0 TestSpecifications:

AAMA/WDMA/CSA 101/I.S.2/A440­08, NAFS ­ North American Fenestration

Standard/SpecificationforWindows,Doors,andSkylights

AAMA 910­10, Voluntary "Life Cycle" Specifications and Test Methods for AW Class

ArchitecturalWindowsandDoors

5.0 TestSpecimenDescription:

5.1 ProductSizes:

OverallArea:4.46 m²

(48.01 ft2)

Width Height

millimeters inches millimeters inches

Overallsize 1829 72 2439 96

Leaf(x2) 770 30­5/16 2368 93­1/4

5.2 FrameConstruction:

FrameMember Material Description

ThresholdThermallybroken

aluminumUnion of Die #H­61268 and Die #HE454withthermalbreakDie#279300.

HeadThermallybroken

aluminumUnionofDie#H­61266andDie#H­61265withthermalbreakDie#279300.

JambsThermallybroken

aluminumUnionofDie#H­61264andDie#H­61263withthermalbreakDie#279300.

Joinery Type Detail

Allcorners Coped

Secured through jamb at each corner intoscrew boss with two #12 x 1" Hex headscrews, and then corner joint is cappedwith2"x2"x4­1/2"cornercap1/32"thickissilicone sealedoverthecornerjoint.

��������������� ���������������

��� ������������������ �������������

�������� � ���!��� ������" �� �#���!$% "&'"(

TestReportNo.:D6386.01­301­47ReportDate:10/08/14

TestRecordRetentionEndDate:08/22/18Page3of9

5.0 TestSpecimenDescription:(Continued)

5.3 Leaf Construction:

Leaf Member Material Description

Toprail,bottomrail,stiles

Thermallybrokenaluminum

UnionofDie#H­61273andDie#H­61272withthermalbreakDie#279300.

AstragalThermallybroken

aluminum

UnionofDie#H­61270andDie#H­61271withthermal break Die #279300 and secured tolock stile of secondary panel with #8 x 2"Phillips flat head screws approximately 12"fromendsandapproximately24"oncenter.

Joinery Type Detail

Allcorners Mitered

Securedatcornerswithaluminumcornerkey,Die#H80000,thatissecuredtorailsandstileswith three dimples in the aluminum to retainthekey.

5.4 Weatherstripping:

Description Quantity Location

Hollow bulb gasket (seeattacheddrawing#USA­2964)

1rowInserted into channel of frame fullperimeter.

Hollow bulb gasket (seeattacheddrawing#USA­2964)

2rows

Inserted into channel of astragal fulllength of span with a 12" hold backfrom head on secondary leaf side ofastragal.

Pileweatherstripw/ fin,0.375x0.330

2Glued to topandbottomofastragalatexterior,2­1/2"wide.

Foam filled bulb gasket (seeattacheddrawing#USA­1820)

1rowInserted in channel of leaf fullperimeter.

��������������� ���������������

��� ������������������ �������������

�������� � ���!��� ������" �� �#���!$% "&'"(

TestReportNo.:D6386.01­301­47

ReportDate:10/08/14

TestRecordRetentionEndDate:08/22/18

Page4of9

5.0 TestSpecimenDescription:(Continued)

5.5 Glazing:

Glass

Type

Spacer

Type

Interior

Lite

Exterior

LiteGlazingMethod

1"IGAluminum

A1­D1

1/4"clear

tempered

1/4"clear

tempered

Interior tape glazed with 3/8" x

1/8" tape and a cap bead at

exterior side and secured at

interior with glazing bead (See

attached Drawing #60939) and

rubberwedgegasket(seeattached

Drawing#USA­1819B)

Location QuantityDaylightOpening

GlassBitemillimeters inches

Leaf 2 704x2180 27­25/32x85­13/16 1/2"

5.6 Drainage:

DrainageMethod Size Quantity Location

Weephole 1­3/4"x1/4" 2

2" from the corners of the

thresholdattheexteriorfacewith

a weep hole cover inserted into

opening (see attached Drawings

#5520HS­031and5520HS­032)

��������������� ���������������

��� ������������������ �������������

�������� � ���!��� ������" �� �#���!$% "&'"(

TestReportNo.:D6386.01­301­47

ReportDate:10/08/14

TestRecordRetentionEndDate:08/22/18

Page5of9

5.0 TestSpecimenDescription:(Continued)

5.7 Hardware:

Description Quantity Location

Hoppe Athinai M156/216N

handleassembly1

Located36"fromsillandsecuredtolock

stileofprimaryleafwiththree#10x2­

1/2"Phillipsovalheadscrews.

Hoppe Athinai M156/216N

handledummyassembly1

Located36"fromsillandsecuredtolock

stile of secondary leafwith three#10 x

2­1/2"Phillipsovalheadscrews.

Handle/deadboltstrike 1

Located directly opposite handle

assembly on astragal and secured with

three #10 x 1/2" Phillips flat head

screws(seeattachedDrawing#900­40).

Hoppeactivetonguesystem 1

Onetonguelocated12"fromsillandthe

other tongue located 30" from head on

leaf lock stile, system was secured to

stile with #8 x 1" Phillips flat head

screws6"oncenterspacingoffulllength

ofstile.

Tonguestrike 2

Located directly opposite tongue on

astragal and secured with two #10 x

1/2" Phillips flat head screws (see

attacheddrawing#900­42B).

Shootboltstrike 2

Located directly opposite shoot bolt in

mid­spanofheadandsillandsecuredto

head and sill with two #10 x 1/2"

Phillips flat head screws (see attached

drawing#900­41F).

Butthinge 8

Located8­3/4"fromsilland26­1/4"on

center,4perleaf,securedtoframejamb

with four #12­24 x 7/8" Phillips flat

head screws and to leaf stile with four

#12 x 1" Phillips pan head screws (see

attacheddrawing#900­24B).

��������������� ���������������

��� ������������������ �������������

�������� � ���!��� ������" �� �#���!$% "&'"(

TestReportNo.:D6386.01­301­47

ReportDate:10/08/14

TestRecordRetentionEndDate:08/22/18

Page6of9

5.0 TestSpecimenDescription:(Continued)

5.8 Reinforcement:

DrawingNumber Location Material

C­1253Insertedintocornerjoints

ofleafassembly.Aluminum

5.9 ScreenConstruction:Noscreenwasutilized.

6.0 Installation:

ThespecimenwasinstalledintoaPinewoodbuck. Theroughopeningallowedfora

3/8" shim space. The exterior perimeter of the windowwas sealedwith structural

siliconesealant.

Location AnchorDescription AnchorLocation

Fullperimeter#12x2"Phillipsflathead

screw

6"fromcornersand12"on

center

��������������� ���������������

��� ������������������ �������������

�������� � ���!��� ������" �� �#���!$% "&'"(

TestReportNo.:D6386.01­301­47

ReportDate:10/08/14

TestRecordRetentionEndDate:08/22/18

Page7of9

7.0 Test Results: The temperature during testing was 29°C (84°F). The results are

tabulatedasfollows:

TitleofTest Results Allowed Note

OperatingForce,

Forcetolatchtestprocedure,

perAAMA101

Forcetolatch:

40.0 N(9.0 lbf) ReportOnly

Deadbolt:

4.5 N/m (1.0 lbs/in) ReportOnly

Forcefordeadbolt:

0 N(0.0 lbf) ReportOnly

Forceforsecondary:

35.6 N(8.0 lbf) ReportOnly

AirLeakage,

InfiltrationperASTME283

at300Pa(6.27 psf)

0.4 L/s/m2

(0.08 cfm/ft2)

0.5 L/s/m2

(0.10 cfm/ft2) max. 1

WaterPenetration,

perASTME547andASTME331

at390Pa(8.15 psf) Pass Noleakage

LifeCycleperAAMA910

DoorLeafCycling,

(Firsthalf)

perAAMA910

12,500cycles Pass Nodamage

LockingHardwareCycling,

(Firsthalf)

perAAMA910

2000cycles Pass Nodamage

MisuseTesting perAAMA910

DoorLeafVerticalLoad

at890 N(200 lbf) Pass Nodamage

DoorLeafCornerBlock

at334 N(75 lbf) Pass Nodamage

LifeCycleperAAMA910

DoorLeafCycling,

(Secondhalf)

perAAMA910

12,500cycles Pass Nodamage

LockingHardwareCycling,

(Secondhalf)

perAAMA910

2000cycles Pass Nodamage

��������������� ���������������

��� ������������������ �������������

�������� � ���!��� ������" �� �#���!$% "&'"(

TestReportNo.:D6386.01­301­47

ReportDate:10/08/14

TestRecordRetentionEndDate:08/22/18

Page8of9

7.0 TestResults:(Continued)

TitleofTest Results Allowed Note

OperatingForce,

Forcetolatchtestprocedure,

perAAMA101

Forcetolatch:

40.0 N(9.0 lbf) ReportOnly

Deadbolt:

4.5 N/m (1.0 lbs/in) ReportOnly

Forcefordeadbolt:

0 N(0.0 lbf) ReportOnly

Forceforsecondary:

40.0 N(9.0 lbf) ReportOnly

UniformLoadDeflection,

perASTME330

takenatastragal

+1920 Pa(+40.10 psf)

­1920 Pa(­40.10 psf)

6.4 mm(0.25")

7.1 mm(0.28")

13.5mm(0.53")max.

13.5 mm(0.53")max. 2,3

AirLeakage,

InfiltrationperASTME283

at300Pa(6.27 psf)

0.4L/s/m2

(0.08cfm/ft2)

0.5L/s/m2

(0.10cfm/ft2)max. 1

WaterPenetration,

perASTME547andASTME331

at390 Pa(8.15 psf) Pass Noleakage

UniformLoadStructural,

perASTME330

takenatastragal

+2880 Pa(+60.15 psf)

­2880 Pa(­60.15 psf)

0.5 mm(0.02")

0.0mm(0.00")

4.6mm(0.18")max.

4.6mm(0.18")max. 2,3

ForcedEntryResistance,

per AAMA1304 Pass Noentry

Note 1: The tested specimen meets (or exceeds) the performance levels specified in

AAMA/WDMA/CSA101/I.S.2/A440for airleakageresistance.

Note2:Loadswereheldfor10seconds.

Note3:Tapeandfilmwereusedtosealagainstairleakageduringstructuraltesting.In

ouropinion,thetapeandfilmdidnotinfluencetheresultsofthetest.

GeneralNote:Thedoorwastestedinaccordancewiththeventinguseclassification.

��������������� ���������������

��� ������������������ �������������

�������� � ���!��� ������" �� �#���!$% "&'"(

TestReportNo.:D6386.01­301­47

ReportDate:10/08/14

TestRecordRetentionEndDate:08/22/18

Page9of9

TheservicelifeofthisreportwillexpireonthestatedTestRecordRetentionEndDate, at

which time suchmaterials asdrawings,datasheets, samplesof test specimens, copiesof

this report, and any other pertinent project documentation, shall be discarded without

notice.

If test specimen contains glazing, no conclusions of any kind regarding the adequacy or

inadequacyof theglass inanyglazed test specimens canbemade. This reportdoesnot

constitutecertificationofthisproductnoranopinionorendorsementbythislaboratory.It

is theexclusivepropertyof theclientsonamedhereinandrelatesonlyto thespecimens

tested.Thisreportmaynotbereproduced,exceptinfull,withoutthewrittenapprovalof

ArchitecturalTesting,Inc.

ForARCHITECTURALTESTING,Inc.

___________________________________________ ________________________________________________

JarodS.Hardman KennyC.White

LaboratoryManager LaboratoryManager

JSH:ms

Attachments(pages):Thisreportiscompleteonlywhenallattachmentslistedareincluded.

Appendix­A:AlterationAddendum(1)

Appendix­B:Photographs(2)

Appendix­C:Drawings(29)

ThisreportproducedfromcontrolleddocumenttemplateATI00506 issued04/25/11.

��������������� ���������������

��� ������������������ �������������

�������� � ���!��� ������" �� �#���!$% "&'"(

TestReportNo.:D6386.01­301­47

ReportDate:10/08/14

TestRecordRetentionEndDate:08/22/18

AppendixA

AlterationAddendum

Note:Noalterationswererequired.

��������������� ���������������

��� ������������������ �������������

�������� � ���!��� ������" �� �#���!$% "&'"(

TestReportNo.:D6386.01­301­47

ReportDate:10/08/14

TestRecordRetentionEndDate:08/22/18

AppendixB

Photographs

��������������� ���������������

��� ������������������ �������������

�������� � ���!��� ������" �� �#���!$% "&'"(

TestReportNo.:D6386.01­301­47

ReportDate:10/08/14

TestRecordRetentionEndDate:08/22/18

PhotoNo.1

DoorCyclingSet­up–Exterior

PhotoNo.2

DoorCyclingSet­up­Interior

��������������� ���������������

��� ������������������ �������������

�������� � ���!��� ������" �� �#���!$% "&'"(

TestReportNo.:D6386.01­301­47

ReportDate:10/08/14

TestRecordRetentionEndDate:08/22/18

PhotoNo.3

DoorCycling–CompletionofFirstHalf

PhotoNo.4

DoorCycling–CompletionofSecondHalf

��������������� ���������������

��� ������������������ �������������

�������� � ���!��� ������" �� �#���!$% "&'"(

TestReportNo.:D6386.01­301­47

ReportDate:10/08/14

TestRecordRetentionEndDate:08/22/18

AppendixC

Drawings

��������������� ���������������

��� ������������������ �������������

�������� � ���!��� ������" �� �#���!$% "&'"(