tentative conference scheduleicpmat2018.hust.edu.vn/wp-content/uploads/2018/08/... ·...
TRANSCRIPT
ICPMAT2018
TENTATIVE CONFERENCE SCHEDULE
Tuesday, September 4th
REGISTRATION
University Library, 1st floor
15:00 – 18:00
Wednesday, September 5th
REGISTRATION
University Library, 10th floor
8:00
OPENING CEREMONY
University Library, 10th floor
9:00 – 9:30
9:30 – 9h45 COFFEE BREAK
PLENARY LECTURE
University Library, 10th floor
9:45 – 12:00
9:45 - 10:30 Chair session: Prof. Tibor Kvackaj
PL01 - 207
Reciprocal Space Map Measurement for Unequal Lattice Change of Ceramics Thin Films at High Temperature
Atsushi Saiki, Shogo Miwa, Takashi Hashizume
10:30 – 11:15 Chair session: Prof. Atsushi Saiki
PL02 - 144
Carbon Nanotube Reinforced Metal Matrix Composites Prepared by Powder Metallurgy and Plastic Deformation
Doan Dinh Phuong
11:15 – 12:00 Chair session: Prof. Kenji Matsuda
PL03 - 228
Improvement of Mechanical Properties by Plastic Deformations Combination in CuCrZr alloy
Tibor Kvackaj, Robert Kocisko, Jana Bidulska, Andrea Kovacova, Dusan Simcak, Patrik Petrousek, Alica Fedorikova
LUNCH
University Library Canteen, 10th floor
12:00 – 13:30
PLENARY LECTURE
University Library, 10th floor
13:30 – 16:00
13:30 – 14:15 Chair session: Prof. Pengchao Si
PL05 - 237
Nanojunctions Based on Metal Oxide Nanowires for Low Temperature and Ultralow Power Consumption Gas Sensors
Nguyen Van Hieu
14:15 – 15:00 Chair session: Prof. Nguyen Van Hieu
PL06 - 216
Candlelight OLED for Lighting Renaissance
Jwo-Huei Jou
15:00 – 15:45 Chair session: Prof. Jow-Huei Jou
PL07 - 344
Time Dependence of Muon Spin Relaxation Rate in Al-Mg-Si Alloys
Katsuhiko Nishimura
15:45 – 16:00 COFFEE BREAK
POSTER SESSION
University Library, 10th floor
16:00 – 17:00
WELCOME RECEPTION AND BANDQUET
University Library Canteen, 10th floor
18:00 – 21:00
Thursday, September 6th
ORAL PRESENTATION
University Library
9:00 – 12:15
Room: 303 Room: 923 Room: 702 Room: 902
Topic 1: Metallurgical Engineering
Chair session:
Prof. Piotr Zabinski Prof. Toshiya Shibayanagi
Topic 2: Function Materials Chair session:
Prof. Yong Zou Prof. Katsuhiko Nishimura
Topic 3: Structural Materials
Chair session:
Prof. Robert Bidulsky Prof. Sengo Kobayashi
Topic 4: Computational Materials Science
Chair session:
Prof. Dinh Van Hai Dr. Tao Hu
9:00 - 9:30 IT01 - 101
Microstructural Changes and Melting Behaviour of Al-Si/AlN Nanomultilayer Systems with
Different Si Concentrations
J. Lipecka, M. Lewandowska, J. Janczak-Rusch, G. Richter, L.P.H.
Jeurgens
IT02 - 212 Fabrication of Nanoporous Metals
and its Electrochemical Applications
Pengchao Si, Bing Luo, Fangyuan Diao
IT03 - 318 Machinability and Physical
Properties of Ti-Al-C MAX phase Ceramics Produced by Using
Pulsed Electric Current Sintering
Makoto Nanko, Kazuki Iihara, Shunsuke Okumura, Naoya
Yamaguchi
IT04 - 401 Computational Materials Science
of Perovskite Oxides from First Principles
Wei Ren
9:30 – 9:50 O102
Effect of Ni-W-P Plating on Bonding Strength of Bi-Te
Thermoelectric Module
Sunghwa Bae, Seungsub Yoon, Injoon Son
O201 In Vitro Biocompatibility of
Magnesium Matrix Composites In-situ Fabricated by Spark Plasma
Sintering
Dinh Ngoc Pham, Nam Viet Nguyen, Nguyen Quang Cao,
Sachiko Hiromoto, Equo Kobayashi
O302 Effect of Natural Aging on Two
Step Aging Behavior of Al-Mg-Si Alloys
Trinh Van Ba, Taiki Tsuchiya, Seungwon Lee, Susume Ikeno,
Kenji Matsuda
O403 Dislocation Dynamics Simulations
of Dislocation-Particle Bypass Mechanisms
Jianbin Liu, Shinji Muraishi
9:50 – 10:10 O103
The Effect of an Artificial Li3PO4 Layer on Lithium Anode for
O202 Rapid Synthesis of MXene at
Room Temperature
O304 TEM Observation with and without
Homogenization in Extruded Al-Mg-Si Alloys
O404 System Analysis of Nonequilibrium
Crystallization of Nonperitectic Iron-based Alloys
Enhanced Cycling Performance of Li-O2 Battery
Huanhuan Guo, Pengchao Si, Lijie
Ci
Yingwen Cao, Yong Zou
Takara Umezawa, Taiki Tsuchiya, Seungwon Lee, Susumu Ikeno,
Kenji Matsuda
Valeri Mikhailovich Golod, Le Cao Dang
10:10 – 10:30 O129
Microstructure characterization unveiled the preparation
techniques of old Japanese swords
Anh Hoang Pham, Takuya Ohba,
Shigekazu Morito, Taisuke Hayashi
O210 In-plane c-axis Oriented BaM
Hexaferrite Films with Self-biased Properties
Xiaozhi Zhang, Zhenxing Yue, Qianying Yu, Jincang Zhang
O312 Microstructures and Mechanical
Properties of Novel 2297 Al–Cu–Li Alloy after T6 Heat Treatment
Shuwei Duan, Tao Wang, Kenji Matsuda, Yong Zou
10:30 – 10:45 COFFEE BREAK
Topic 1: Metallurgical
Engineering Chair session:
Prof. Malgorzata Lewandowska Prof. Bui Anh Hoa
Topic 2: Function Materials
Chair session: Prof. Eunsoo Choi
Prof. Ken Hirota
Topic 3: Structural Materials
Chair session: Prof. Shinji Muraishi Prof. Krzysztof Zaba
Topic 4: Computational Materials Science
Chair session: Prof. Wei Ren
10:45 – 11:15 IT05 - 104 Removal of Tramp Elements in
Steel for Recycling Ferrous Scraps
Hideki Ono
IT13 - 235 Defect Driven photo-generated Carrier Relaxation in the Binary
Alloys of Si-Ge Nanocrystals
Ngo Ngoc Ha
IT11 - 348 New Low Density High Ductility
Age Hardenable Magnesium Mg-Li-Sc Alloys
Jan Dutkiewicz, Lukasz Rogal, Damian Kalita, Przemysław Fima
IT08 - 405 Adaptive Time-Stepping Phase
Field Model for Ferroelectrics based on the Ginzburg-Landau
Theory
Le Van Lich, Dinh Van Hai
11:15 – 11:35 O108 Mechanical and Tribological
Properties of Nanostructured TiAlVN Coatings Deposited by Magnetron Sputtering Process
Duong Van Luong, Doan Dinh Phuong, Kyoung Il Moon, Phan
Ngoc Minh
O218 Effect of Ti-15Zr-4Nb-4Ta Alloy
Nanotube on Osteoblast Behavior in Vitro
Satoshi Okano, Masayuki Mori, Sengo Kobayashi, Takeaki
Okamoto
O313 Effect of High-Pressure Torsion
(HPT) and Subsequent Aging on Microstructure and Mechanical
Properties of Al-Li (-Cu, -Mg) Alloys
Seungwon Lee, Yuhei Haizuka,
Taiki Tsuchiya, Seiji Saikawa,
O406 Intrinsic and Anisotropic Rashba Spin Splitting in Janus Transition
Metal Dichalcogenide monolayers
Tao Hu, Fanhao Jia, Guodong Zhao, Jiongyao Wu, Alessandro
Stroppa, Wei Ren
Kenji Matsuda, Zenji Horita, Shoichi Hirosawa, Susumu Ikeno
11:35 – 11:55 O127
Applicability of Wiedemann-Franz Law to Thermal Conductivity of
Molten Field’s Metal
Nobuyuki Mizuno, Shoki Kosai, Eiji Yamasue
O219 Microstructure Observation of
Nb3Sn Superconducting Multi Wire using Cu-Sn-Zn Ternary Bronze
Daichi Kawamukai, Taiki Tsuchiya, Seungwon Lee, Kenji
Matsuda, Yoshimitsu Hishinuma
O315 Age-Hardening Behavior in Al-
0.5mol%Mg2Si-Xmol%Si (X=0.2, 0.4, 0.8, 1.6) Alloys Aged at 473K
Taiki Tsuchiya, Yuki Makita, Seungwon Lee, Seiji Saikawa, Susumu Ikeno, Kenji Matsuda
O345 Synthesis and Properties of the
High Entropy Oxides Characterized by Rocksalt and
Spinel Structures
Mirosław Stygar, Juliusz Dąbrowa, Marek Danielewski, Manfred
Martin
11:55 – 12:15 O208 Synthesis of KOH-activated
Glucose-based Carbon with High Electrochemical Performance for Use in Supercapacitor Materials
Sangeun Chun, Jay F. Whitacre
O317 Microstructure and Catalytic
Activity of Melt Spun Al-Cu-Fe Ribbons
Lidia Litynska-Dobrzynska, Katarzyna Stan-Głowińska, Ewa
M. Serwicka
LUNCH
University Library Canteen, 10th floor
12:30 – 13:30
ORAL PRESENTATION
University Library
13:30 – 16:30
Room: 303 Room: 923 Room: 702 Room: 902
Topic 1: Metallurgical Engineering
Chair session: Prof. Hideki Ono
Prof. Tibor Kavackaj
Topic 2: Function Materials
Chair session: Prof. Makoto Nanko
Prof. Do Minh Nghiep
Topic 3: Structural Materials
Chair session: Prof. Kenji Matsuda Prof. Jana Bidulska
Topic 2: Function Materials
Chair session: Prof. Equo Kobayashi
Prof. Tran Duc Huy
13:30 - 14:00 IT09 - 110 Magnetoelectrochemistry - New
Way to Control Morphology of Cathodic Deposit
Piotr Zabinski
IT07 - 239 Self-Centering Capacity of
Superelastic SMA Fibers Considering Various Diameter and
Spearhead Length
Eunsoo Choi, Behzad Mohammadzadeh, Doohyun Kim,
Sang-yong Lee, Eunsol Kwon, Seung-Wook Chae, Hoan Duong
Nguyen, Woo Jim Kim
IT12 - 308 Effects of Oxygen and Nitrogen
Addition on Phase Transformation in Ti-10at%V
Sengo Kobayashi, Ryohei Fukushima, Shiki GoYoshi,
Satoshi Okano
IT14 - 225 Nanoscale Assembly of
Superconducting Vortices with STM Tip
Junyi Ge, Valadimir N. Gadilin , Jacques Tempere, Cun Xue,
Youhe Zhou, Jozef T. Devreese, Victor V. Moshchalkov
14:00 – 14:20 O123
Wetting Behavior of Liquid Iron-Carbon Sample on Graphite
Substrate in the Initial Contact Period
Son Cao Nguyen, Koichiro Ohno,
Takayuki Maeda, Kazuya Kunitomo
O222 ZnFe2O4 Nanofibers Fabricated on
Chip by Electrospinning for NH3 Gas Sensors
Hoang Van Nguyen, Phuoc Hong Phan, Hung Manh Chu, Le Thanh Thi Dang, Duy Van Nguyen, Hoa
Duc Nguyen, Hieu Van Nguyen
O319 Study on Microstructure and
Stress Corrosion Behavior of 7N01 Aluminum Alloy Friction Stir
Welded Joints
Xiaolong He, Yong Zou
O255 Enhance Piezoelectric Properties By Growing of 0.8(Na0.5Bi0.5)TiO3-
0.2Sr0.7Ca0.3TiO3 Single Crystal by Solid State Crystal technique
Phan Gia Le, Jong Sook Lee,
Thuy Linh Pham, John G. FISHER, Hwang-Pil Kim, Wook Jo
14:20 – 14:40 O137
Study of Friction Stir Welding and Heat Treatment Process on 7075
Aluminum Alloy
Yuan Zhang, Yong Zou
O223 Transmission Electron Microscopy
Study on The Microstructure of GeTe-based Thermoelectric
Materials
Hyunho Kim, Hyerin Jeong, Jaeik Kwak, Hyunji Kim, Ho Seong Lee
O320 Effect of Low Temperature Heat Treatment on Fatigue Properties
of 6005A Aluminum Alloy Friction Stir Welding Joints
Yong Zou, Tao Wang, Dongting
Wu, Kenji Matsuda
O256 Influence of Ball-Milling Time on
Electric Properties of BiFeO3-PbTiO3-BaZrO3 Piezoceramics
Jie Jian, Rui Peng, Jianguo Chen, Jinrong Cheng
14:40 – 15:00 O113
Study of Microstructure Distribution and Properties of
Cu/TiB2 Composite Coating on H13 Steel Surface Prepared by
Laser Cladding
Tran Van Nghia, Yang Sen
O224 Electronic Structure and
Thermoelectric Properties of N-Type Zintl Compound Mg3Sb2: A
First-Principles Study
Juan Li, Shuqi Zheng, Shuai Zhang, Shichao Liu
O321 High Efficiency Wear-Resistant Surfacing Layer Preparated by Twin-Wire Indirect Arc Welding
Dongting Wu, Yong Zou, Chuanwei Shi, Guanlin Zhao
O258 Surfactant Dependent
Nanostructured Co3S4/Zn0.76Co0.24S: High
Performance Electrode Material for Asymmetric Supercapacitors
Yuan Yang, Pengchao Si
15:00 – 15:15 COFFEE BREAK
Topic 2: Function Materials Chair session:
Prof. Guanghui Min Dr. Ngo Ngoc Ha
Topic 2: Function Materials Chair session:
Prof. Junyi Ge Prof. Hisayuki Suematsu
Topic 3: Structural Materials Chair session:
Prof. Nguyen Hong Hai Prof. Seungwon Lee
Topic 3: Structural Materials Chair session:
Prof. Atsushi Saiki Prof. Injoon Son
15:15 – 15:45 IT17 - 231
Water Molecule Absorption in Sr2Ca2Cu3Oy Superconductors
and Enhancement of Critical Current Density Properties
H. Suematsu, T. Nagumo, A. Sklyarova, T. Aoba, G.Thorogood,
A. Fujimoto, T. M. D. Do, T. Nakayama, K. Niihara
IT10 - 220 Simultaneous Synthesis and
Densification of Carbon Nano-Materials Dispersed Boron
Carbide Composites Using Pulsed Electric-Current Pressure
Sintering (PECPS)
Ken Hirota, Hironobu Hirahara, Masaki Kato, Toshiyuki Nishimura
IT15 - 310 Microstructure Evolution of AM30 Mg Alloys by Homogenizing and
Sequentially Rolling
Guang-hui Min, Sik-Bong Kang, Jae-hyung Cho, Yi Sun, Qian
Wang
IT16 - 307 Micromechanical Analysis of
Dislocation and Precipitate Interactions in Aluminum Alloys
Shinji Muraishi, Liu Jianbin
15:45 – 16:05 O250
Development of Temperature-stable Dielectric Properties of
Barium Strontium Titanate
Xiaoxiao Guo, Dengren Jin, Kai Xu, Jinrong Cheng, Jianguo Chen
O238 Enhancement of Electrical
Properties in Compositionally Graded xBiFeO3-(1-x)PbTiO3 Thin
Films on Stainless Steel Substrates
Susu Wang, Jianguo Chen,
Jinrong Cheng
O322 Microstructure and Mechanical
Properties of In-situ Cast Aluminum Based Composites
Reinforced with TiC Nano-Particles
W. Maziarz, P. Bobrowski, A.
Wojcik, A. Bigos, L. Szymański, P. Kurtyka, E. Olejnik
O329 Pore Structure in a Commercial
Ready-to-Press Aluminium based Powder Metallurgy Alloy
Jana Bidulska, Robert Bidulsky, Tibor Kvackaj, Marco Actis
Grande
16:05 – 16:25 O251
The Microstructure And Electrical Properties of Low Temperature
Sintered 0.57(Bi0.8La0.2)(Fe0.95Ga0.05)-
0.43PbTiO3 Ceramics
Feng Luo, Shujin Shen, Jianguo Chen, Jinrong Cheng
O241 Nanoengineering Silicon
Nanocomposite for High Energy Density Lithium-ion Battery
Application
Lijie Ci, Wei Zhai, Xiaoyan Xu, Qing Ai
O323 Process Design for Superalloys
Sheet Rotary Forming
Krzysztof Zaba, Sandra Puchlerska, Tomasz Pieja,
Jaroslaw Pyzik
O332 Development of Disc Friction Joining and its Application to
Similar and Dissimilar Joining
Toshiya Shibayanagi, Shyuhei Hirose, Norihiro Tajiri, Kyosuke
Ito, Koshiro Sugimori, Satoru Ishihara
16:25 – 16:45 O254
Dielectric and Piezoelectric Properties of 0.65BiFeO3-
0.25(Pb1-x Smx) TiO3-0.1BaTiO3
O221 Electronic Structure of FeS
Superconductor
O324 Effect of Mg Content on
Mechanical Properties in Al-
O342 Synthesis of High Purity Yttrium
Diborocarbides Powder from Y2O3, B4C, and Carbon Powder Mixtures
Adding Sm Near the Morphotropic Phase Boundary
Zhenhai Ning,Jianguo Chen,Dongyan Fu, Jinrong Cheng
J. Miao, X. H. Niu, D. F. Xu, Q. Yao, Q. Y. Chen, T. P. Ying, S. Y.
Li, Y. F. Fang, J. C. Zhang, S. Ideta, K. Tanaka, B. P. Xie, D. L.
Feng, Fei Chen
10mass%Si-0.05~0.80
mass%Mg Alloy Die Casting
Seiji Saikawa, Masahiko Iijima, Arisa Osugi, Yiyang Zhao, Hisao
Kazuta, Susume Ikeno
by High- Energy Ball-Milling and Reactive Spark Plasma
Van-Quyet Nguyen, Jun-Seop Kim, Hee-Jung Lee, Jian Gu,
Zhao Lin, Sea-Hoon Lee
DINNER
University Library Canteen, 10th floor
18:00 – 20:00
Friday, September 7th
TECHNICAL TOUR
7:00 12:30
HUST square (Hotel): Departure to Hoa Phat Steel Company, Hai Duong, Vietnam Lunch at Ha Long Bay, Quang Ninh, Vietnam
12:00-16:00 19:30
Ha Long Bay sightseeing tour End the trip, Arrive at HUST (Hotel)
POSTER SESSION
1. P105 Effect of Impurity Element in Solidification Sequence of Al-10%Si System Alloy
Hisao Kazuta, Susumu Ikeno, Seiji Saikawa
2. P106 Effect of Two-Step Anodization on the Color Uniformity of Dye-Treated Anodized AA5052
Jeonghun Lee, Sunghwa Bae, Injoon Son, Atsushi Saiki
3. P109 Influence of Ag Doping on the Electrochemical Supercapacitor Characteristics of Manganese Dioxide Prepared by Pulsed Potentiostatic
Electrodeposition
Huyen Thi Thanh Bui, Anh Ngoc Nguyen, Duong Tung Nguyen, Thuy Thi Bich Hoang
4. P111 Corrosion Behaviors of Austenitic and Lean Duplex Stainless Steels Joints Prepared by Flux Cored Arc Welding
Pranpreeya Wangjina, Suphitcha Moonngam, Ekkarut Viyanit, Namurata Sathirachinda Palsson, Chaiyasit Banjongprasert
5. P112 pH Dependence of Ion Exchange K+ / Na+ of Tantalite
Takashi Hashizume, Atsushi Saiki
6. P114 Influence of Cold Rolling Reduction on the Microstructure of a Sponge Iron Melted-CMnSi TRIP Steel
Dinh Van Hien, Sai Manh Thang, Tran The Nam, Nguyen Anh Xuan, Nguyen Duong Nam, Pham Mai Khanh
7. P115 The Influent of Heat Treatment Conditions on the Microstructure and Mechanical Properties of CuAl10Ni4Fe4Mn Casting Alloy
Nguyen Minh Dat, Nguyen Quang Huynh, Do Van Quang
8. P116 Controlled-Atmosphere Sintering of KNbO3
Doan Thanh Trung, John G. Fisher
9. P117 Shape Controlled Growth of Flower-like Pyrrhotite Fe7S8 Superstructure via a Facile Hydrothermal Route
Xiangli Wen, Yuxuan Liang, Pengpeng Bai, Bingwei Luo, Shuqi Zheng
10. P118 Preparation of Copper Matrix Composite Reinforced with In-situ Nanosized Al2O3 Particle Powder from Metal Nitrates
Khanh Quoc Dang, Yen Ngoc Nguyen, Duong Hoang Tien Truong, Huy Duc Vu, Hai Hong Nguyen, Hai Minh Le
11. P119 Study the Effect of Induration Temperatures on the Structure and Quality of Iron Ore Pellets
Nguyen Thanh Hoan, Nguyen Son Lam, Bui Anh Hoa
12. P120 Study the Effect of Temperature and Time on the Quality of Sintered Ores
Nguyen Thanh Hoan, Nguyen Son Lam, Bui Anh Hoa
13. P121 Study on the Breakdown of Milling Balls Made of 13% Cr White Cast-Iron Working in Strong Abrasive and Clash Conditions
Quyen Hoang Thị Ngoc, Chieu Le Thi, Hai Nguyen Hong
14. P122 The Upgrading of Ha Tinh Ilmenite to Synthetic Rutile by Becher Process
Binh Ngoc Duong, Than Ngoc Truong, Thao Thi Nguyen
15. P124 Influence of Rare-Earth on the Microstructure and Mechanical Properties of High Manganese Steel Under Impact Load
Nguyen Duong Nam, Pham Mai Khanh
16. P125 Simple Fabrication of Anticorrosion Superhydrophobic Surfaces on Steel
Thi Phuong Nhung Nguyen, Viet Chien Nguyen, Dang Nam Nguyen, Tran Phuong Huy, Van Kiet Nguyen, Nguyen Van Duy
17. P126 Effect of Dielectric Liquid on the Diameter of Nickel Microspheres Produced by Aided Electric Discharge
Nguyen Tien Dung, Bui Vu Hung
18. P128 Synthesis of Titanium Dioxide Pigment from Upgrading Ilmenite by the NaOH Molten Salt Method
Vu Diem Ngoc Tran, Thao Thi Nguyen, Binh Ngoc Duong, Than Ngoc Truong
19. P130
Fabrication of Porous Titanium Dioxide Particles by Selective Chlorination of Ilmenite
So-Yeong Lee, Sung-Hun Park, Sung-Min Hong, Ho-Sang Sohn
20. P131 Production of Titanium Powder from Titanium Tetrachloride by Inductively Coupled RF plasma
Sung-Hun Park, So-Yeong Lee, Young-Joon Kim, Ho-Sang Sohn
21. P132 Defect Formation and Mechanical Properties of Dissimilar Friction Stir Welded T-Lap-Joints of AA7075 and AA5083
Hao Duong Dinh, Masakazu Okazaki, Tra Tran Hung
22. P133 Effect of Binders on Reduction Rate of Magnetite Iron Ore Pellets
Tran Thi Thu Hien, Tran Ngoc Hung
23. P134 Research on SiC Fabrication from Rice Husk Charcoal and Diatomite
Trung Van Trinh, Minh Ngoc Nguyen
24. P135 Effect of Molasses Content on Reduction Kinetic of Mill Scale by A3 Coal
Nguyen Hoang Viet
25. P136 Effect of Thermal Degradation on Aqueous Polyvinyl Pyrrolidone Quenchant
Xuan Thi Tran, Toai Dinh Vu, Tu Van Nguyen, Chieu Thi Le, Khanh Quoc Dang
26. P138 Influence of Strengthening Phases on the Microstructure and Mechanical Properties of CuAl9Fe4 Alloy
Tuan Vu Anh, Nam Nguyen Duong, Duong Pham Xuan, Tran Duc Huy, Vuong Van Hoang, Pham Mai Khanh
27. P139 Development of Ultrafine-grained Al-Zn Alloys for Use as an Anode
Phakkhanan Khamnantha, Siwat Linchee, Namurata Sathirachinda Palsson, Chaiyasit Banjongprasert
28. P140 The Effects of Cu on Al-Zr-Sc Alloys Processed by Equal Channel Angular Pressing
Jesada Punyafu, Ussadawut Patakham, Chaiyasit Banjongprasert
29. P141 Pinning Particles and Abnormal Grain Growth in a 6063 Aluminum Alloy during Homogenization
Kanokwan Uttarasak, Wanchai Chongchitnan, Kenji Matsuda,
Julathep Kajornchaiyakul, Chaiyasit Banjongprasert
30. P142 Influence of the Additives on Electrolysis Process of Tin
Dinh Tien Thinh
31. P143 Effect of Heat Treatment on Fabrication of High Manganese Steel Powder
Tu Bach Ha, Hoang Lai Vu, Huyen Ngoc Bui, Khanh Quoc Dang, Ngoc Diem Vu Tran
32. P203 Effect of Surface Treatments of Nacre Layer on Wettability and Osteoblast Behavior in Vitro
Andi Muhammad Anshar, Sengo Kobayashi, Satoshi Okano
33. P204 Corrosion Observation of Rare Earth Magnets of SmFeN and NdFeB
Takayuki Hosoya, Katsuhiko Nishimura, Takahiro Namiki, Susumu Teraoka, Haruhiro Komura
34. P205 Influence of an Electroplated Pt Layer on the Bonding Strength of n-type Bi-Te-based Thermoelectric Elements
Jaehoon Park, Sunghwa Bae, Taiki Tsuchiya, Seungwon Lee, Kenji Matsuda, Kwanho Park, Sanghum Cho, Injoon Son
35. P206 YSZ Thin Film Fabricated by Electrochemical Deposition Method by Applying a Pulse Voltage
Ren Sato, Atsuki Saiki, Takashi Hashizume
36. P209 Preparation of Fe-Substituted LiMn2O4 and its Battery Characteristics
Shino Mikawa, Atsushi Saiki, Takashi Hashizume
37. P211 Enhanced Superconductivity by K Doping in K2xFeTe1-xSx
Zhenjie Feng, Cheng Cheng, Qing Li, Tao Li, Fei Chen, Junyi Ge, Shixun Cao, Jincang Zhang
38. P214 Using Ultrasound to Increase the Amount of Hollow Nickel Microspheres Produced by Ultrasound-Aided Electric Discharge
Tien Dung Nguyen, Thanh Cong Nguyen
39. P215 Magnetic and Electronic Properties of Sm-Fe-N Magnets
Kanchi Kasugai, Katsuhiko Nishimura, Takahiro Namiki, Susumu Teraoka, Haruhiro Komura
40. P217 Effects of Titanium Surface Wettability on Osteoblast Behavior in vitro
Kenta Nisogi, Sengo Kobayashi, Satoshi, Kensuke Kuroda, Takeaki Okamoto
41. P226 Hydroxyapatite Coating of Pure Magnesium for Biodegradable Implant Applications
Trang Thi Le, Nam Viet Nguyen, Dinh Ngoc Pham, Nguyen Quang Cao, Hai Dinh Van
42. P227 The Use of Multi-Walled Carbon Nanotubes and Nanoclay For Simultaneously Improving the Flame Retardancy and Mechanical Properties of
Epoxy Nanocomposites
Nguyen Tuan Anh, Nguyen Quang Tung, Bach Trong Phuc
43. P229 Synthesis of ordered mesoporous carbon from Vietnam natural kaolin clay for supercapacitor application
Quang L. D. Ngo, Nam T. H. Chu, Hang T.T Le
44. P230 Robustness in Coupling between Iron and Rare Earth Spins in Rare Earth Orthoferrites
Mohanad Hazim Mohammed, Joseph Horvat, Zhenxiang Cheng, Shixun Cao
45. P232 Synthesis of Cu1.6Bi4.6S8 Compounds for Thermoelectric Application
Binh Ngoc Duong, Long Duc Bui, Phuong Duy Bui
46. P233 Influence of Particle Shape and Size on the Structure and Properties of the Porous Alumina Fabricated by Powder Metallurgy
Hai Hong Nguyen, Yen Ngoc Nguyen, Khanh Quoc Dang, Hai Minh Le
47. P234 Fabrication of Transparent Magnesium Aluminate Spinel (MgAl2O4) Ceramics by PECS Processing of Nanoscale Powders Derived from Solution
Combustion Synthesis Method
Yen Ngoc Nguyen, Tu Anh Dao, Khanh Quoc Dang, Hai Minh Le
48. P236 Synthesis of Cu2ZnSnS4 by Mechanical Alloying Method for Thermoelectric Application
Khanh Van Nguyen, Long Duc Bui, Binh Ngoc Duong
49. P240 The Oxidation of Commercial Viscose Rayon-Based Carbon Fibers for the Production of Activated Carbon Fibers (Acfs)
Hoang Le Vu, Son Huu Nguyen, Cuong Van Pham, Hung Thai Le
50. P242 Electronic and Magnetic Properties of Caged-Structure Intermetallic Compounds CeT2Al20 (T = W, Nb)
Takahiro Namiki, Hidetsugu Waki, Kaito Morita, Katsuhiko Nishimura
51. P243 Synthesis and Characterization of Willemite Crystal in Na2O-K2O-Li2O-CaO-(ZnO)-Al2O3-SiO2 Ceramic Glazes System
Nophawan Dechboon, Sakdiphon Thiansem, Apinon Nuntiya, Cherdsak Saelee
52. P244 Crystallization Kinetics and Consolidation of Al82La10Fe4Ni4 Glassy Alloy Powder by Spark Plasma Sintering
Viet H. Nguyen, Oanh T. H. Nguyen, Soon J. Kim, Alberto Moreira Jorge Jr
53. P245 Microstructure Investigation of Spark Plasma Sintered nano-Cu Powders
Nguyen Thi Hoang Oanh, Vu Nga Linh, Nguyen Hoang Viet
54. P246 Synthesis and Luminescent Properties of Europium Doped Zirconia Nanoparticles
Pham Van Huan, Nguyen Hoang Viet, Vuong-Hung Pham
55. P247 Effect of Bias Voltage on Morphology and Properties of CrN Thin Film Deposited on Stainless Steel by Arc Plasma Evaporation
Trung Van Trinh, Tuan Hong Pham, Hop Thanh Nguyen, Thanh Van Nguyen
56. P249 The Nanocluster of Cu, Ag, Au and Their Physico-chemical and Tribological Properties
Andrey Kuzharov, Alexey Milov, Julia Gerasina, Ivan Neverov, Nguyen Huynh
57. P252 Enhanced Piezoelectric and Ferromagnetic Properties with Ba Doping in 0.6(Bi0.9La0.1)(Ga0.05Fe0.95)O3-0.4PbTiO3 Solid Solutions
Rui Peng, Jie Jian, Jinrong Cheng
58. P253 Effects of Porosity on Dielectric, Ferroelectric and Piezoelectric Properties of BLF-PT Ceramics
Shujin Shen, Jinrong Cheng
59. P257 Structure and Electrical Properties of Lead-Free BSZT Piezoelectric Thin Films
Nguyen Thi Minh Phuong, Pham Thi Nguyet, Vu Thu Hien, Vu Ngoc Hung
60. P259 Liquid Plasma Synthesis of Ru/rGO Nanocomposites for Electrochemical Application
Chu Thi Quy, Dao Van Duong, Nguyen Xuan Viet, Dang Thi Thanh Le, Nguyen Duc Hoa
61. P301 Effects of Precision Heat Treating on Microstructure and Mechanical Properties of Steel 40XA
Duong Van Nguyen, Duc Minh Le, Thien Ngoc Nguyen
62. P303 Effect of pH of Coating Solution on Adhesion Strength of Hydroxyapatite and Octacalcium Phosphate Coatings on AZ31 Magnesium Alloy
Tuyet Thi Anh Ngo, SachikoHiromoto, Phong Ngoc Nguyen, San Thi Pham
63. P305 TEM Observation of β1’ in Mg-2.2mol%Zn Alloy
Tomoyoshi Maeda, Tomoya Hiragi, Taiki Tsuchiya, Seungwon Lee, Susumu Ikeno, Kenji Matsuda
64. P306 TEM Observation in Al-7mass%Si-0.4mass%Mg Casting Alloy Aged at Various Temperature
Yuki Makita, Taiki Tsuchiya, Seungwon Lee, Seiji Saikawa, Susumu Ikeno, Kenji Matsuda
65. P309 Aging Behavior of Cold-rolled Al-Mg-Si Alloy with Cu and Ag Addition
Katsuya Yatsukura, Taiki Tsuchiya, Seungwon Lee, Susumu Ikeno, Kenji Matsuda
66. P311 Formation of Heterostructure with Appearance of -Al Phase in Hyper- and Eutectic Al-Si Alloys by Solidification at High Rate
Hong Hai Nguyen, Quoc Tuan Nguyen, Minh Duc Le
67. P314 Microstructure Observation of Ag Added Al-Mg-Ge Alloys
Shu Umemura, Taiki Tsuchiya, Seungwon Lee, Susumu Ikeno, Kenji Matsuda
68. P316 A Study on the Effect of Heating Temperature on the Properties of Ceramic Shell on Replicast Technology
Thao Phuong Do, Nang Quang Dinh
69. P325
ECAP Effect on the Micro-structure, Mechanical Properties and Corrosion Behavior of Biodegradable Mg-Zn-Ca Magnesium Alloy
Sen Yang, Xuan Nam Ly, Thanh Hung Nguyen
70. P326 Microstructures in HAZ after Heat Treatment of Carbon Steel and Austenitic Stainless Steel Welds
Le Thi Nhung, Bui Sy Hoang, Nguyen Duc Thang, Pham Mai Khanh
71. P327 The Effect of Thermomechanical Processing on Grain Size, Texture and Mechanical Properties of Pure Magnesium
Mouhamadou Moustapha Sarr, Hiroyuki Miyamoto, Motohiro Yuasa
72. P330 Densification and Mechanical Properties of Fe13Mn-TiC Composite Fabricated by Pulsed Electric Current Sintering Process with Different Sintering
Temperatures
Quang Anh Hoang, Hiep Van Tran, Minh Cong Nguyen, Hai Minh Le, Khanh Quoc Dang
73. P333 Corrosion Resistance of the Sintered Fe-Cu-C, Fe-Cu-Ni-Mo-C and Fe-Cr-Mo-C Alloys Coated with a Rust Preventive Oil
Satoshi Sunada, Masahiko Hatakeyama, Keisuke Hibino, Kentoro Tagishi, Yusuke Mizukoshi, Syugo Takeuchi, Yohta Maekawa, Naoki Nagase
74. P334 The Influence of Carbon Content of The Austenite on Ausferrite Volume Fraction in Austempered Ductile Iron
Hong Hai Nguyen, Huu Dung Nguyen, Anh Tuan Hoang
75. P335 The Influence of Heat Treatment in The Intercritical (three-phase) Region on Ferrite Volume Fraction in Dual Matrix ADI
Anh Tuan Hoang, Hong Hai Nguyen, Huu Dung Nguyen
76. P336 Effect of Fiber Laser Condition on Microfabricated Shape in SUS430 Stainless Steel
Tetsuo Aida, Ryuuki Itoh, Masayuki Yamamoto, Masayuki Ohta, Takaaki Shimizu
77. P338 Effect of Double-diffusive Convection on Solidification Process in a Binary System
Takeshi Yamane, Koshiro Mizukami, Kanako Torii, Masamichi Yoshida, Toshiya Shibayanagi
78. P340 Effect of Mo- Alloyed High on Heat Treatment Behavior of Hypoeutectic High Cast Iron
Thanh Nguyen Van, Giang Hoang Vinh, Tai Nguyen Tien, Giap Nguyen Duc, Lan Nguyen Thi Ngoc
79. P341 Effect of Binder Composition and Sintering Parameters on the Microstructure and Mechanical Properties of WC-7(Ni,Fe) Hard Alloys
Tran Bao Trung, Doan Dinh Phuong, Le Danh Chung, Tran Ba Hung
80. P343 Microstructure and Mechanical Properties of TiAl/Al2O3 in situ Composite by Combustion Process
Binh Thanh Do, Thuong Viet Tran, Hai Minh Le, Huy Duc Tran, Hiroyuki Miyamoto
81. P346 Change in the Strength of Steel Grade 11 Loaded at Room Temperature
Thu-Hien Nguyen, Van-Hung Kieu, Xuan-Hiep Dinh, Cao-Son Nguyen, Hang To Thi Phung, Anh-Hoa Bui
82. P347 Effect of Artificial Water Cooling during Extrusion on Extrudability and Mechanical Properties of Magnesium Alloys
Sang-Hoon Kim, Jong Un Lee, Ye Jin Kim, Sung Hyuk Park
83. P349 Flame Retardancy and Mechanical Properties Epoxy-Fly Ash Complex Produced by Addition Carbon Nanotube
Nguyen Tuan Anh, Nguyen Quang Tung
84. P402 First Principles Study of the Adsorption of Carboxylic Acid on Cu(111)
Norio Nunomura, Jun Yamashita, Masahiko Hatakeyama, Satoshi Sunada
85. P407
Alkali Doped Bismuth – based Perovskite Materials: a DFT Study
Nguyen Hoang Linh, Le Thi Hai Thanh, Phung Quoc Bao, Bach Thanh Cong, Dang Duc Dung
86. P409 Effect of Springback in DP980 Advanced High Strength Steel on Product Precision in Bending Process
Hung Thai Le, Dinh Thi Vu, PhuongThi Doan, Kien Trung Le
87. P410 Methodology of Analysis and Adjustment for Water Flow and Casting Speed in Continuous Steel Casting
Dao Hong Bach, Tran Dinh Viet
88. P411 FEM Simulation and Exprimental Analyses of AZ31 alloy during Constrained Groove Pressing
Dang Thi Hong Hue, Pham Thi Thuy, Dao Minh Ngung, Pham Quang
89. P412 Research on Using Composite Material for Automotive Drive Shaft
Quang Thanh Nguyen
90. P413 Applying Finite Element Method for Analyzing the Replacement of Sheet Metal for Composite Material on the Automobile Body
Quang Thanh Nguyen
91. P414 The Preparation and Characterization of Cu/Al Composite Sheets by Accumulative Roll Bonding
Pham Thi Thuy, Pham Tien Hao, Pham Quang