tender no.1053 / 2020 bidding documents - punjab, pakistan · 2020-02-19 · 22. please read, sign...
TRANSCRIPT
Tender No.1053 / 2020
Bidding Documents SPECIAL INSTRUCTIONS
No Cutting erasing is allowed in the Tender bid.
Bid offered strictly in accordance with the bid document will only be accepted.
Only typed bid will be accepted (no hand written)
Bid Security will be accepted in the form of CDR (Call Deposit Receipt)
THIS IS FOR STRICT COMPLIANCE, FAILING WHICH THE RESPECTIVE BID SHALL STAND CANCELLED
Contact Address: Incharge Purchase Cell
University of Veterinary and Animal Sciences,
Sheikh Abdul Qadir Jillani (Outfall Road) Lahore
Tel: 042-99211449, Ext: 138
TERMS & CONDITIONS
IPL No. 1680 1. The price of this tender document is Rs.1,500/- (Non Refundable)
2. The Tender complete in all respect along with 2% Bid Security of Estimated Price / Cost in the shape
of only “Call Deposit Receipt” (CDR) in favor of “Treasurer, UVAS”, Lahore should reach in
Purchase Cell by 04-03-2020 at 11:00 a.m in the University of Veterinary & Animal Sciences, Lahore.
3.
Lot
No. Description
Bid Security
(Rs)
01 Sr. No. 1 to 5 206,000/-
02 Sr. No. 6 to 20 258,000 /-
03 Sr. No. 21 to 34 334,800/-
4. The quotations will be opened on 04-03-2020 at 11:30 a.m. in Administration Block, Treasurer Office,
Meeting Room No. 116, 1st Floor, University of Veterinary and Animal Sciences, Lahore.
5. The offered price should be inclusive of all taxes.
6. The rate must be quoted only Pakistani rupees
7. Quoted rates must be valid for 180 days
8. No offer shall be considered if it is:
a) Submitted without Tender Document
b) Submitted without Bid Security money.
c) Received after the date and time fixed for the receipt of tenders.
d) Is unsigned
e) Is ambiguous
f) Is conditional
g) Is received by Telegram.
h) Is received with a validity period shorter than the required in the tender enquiry.
i) Does not confirm to general conditions of the enquiry i.e it is not accompanied by sample or
manufacturers literature where required.
j) Is for store materially and substantially different from that required in the tender enquiry.
9. A stamp paper of Rs.50/- will be attached with the bid that the firm is not black listed at PPRA,
suspended or removed in any Government, Semi Government, Autonomous Bodies, Public sector
university and any other Department.
10. In case of warranty 10% amount as security will be deducted from the bills of the firms at the time of
payment and be released as per purchase rules 2005 of the UVAS.
11. The sample may be provided as & when required by Technical Committee.
12. Applicable Govt. levies will be deducted at source from the bill.
13. The equipment / stores supplied by the bidder shall be brand new, in original manufacturer packing
and complete in all respects. Cost of transportation of supplied equipment / goods to the site of
University and cost of installation and commissioning of equipment shall be the responsibility of the
supplier.
14. Supply of material should be made within stipulated period of the Purchase Order positively; in case of
failure the amount of CDR may forfeited and purchase will be made at the risk and cost of the
defaulter or any penalty as per Purchase Rules, 2005 of the University can also be imposed.
15. The buyer shall notify the supplier in writing/through telephone of any defects that occur during the
warranty period. On receipt of such notification/telephonic message the supplier shall attend the
breakdown call within a maximum of 6 working hours.
16. The firm offering prices for supply of machinery and equipment should have sufficient qualified
technical staff and be equipped and having capability to undertake the maintenance or replacement for
the equipment supplied to this University.
17. The bidding documents should be dropped in Tender Box in the office of the Purchase Cell, Room No.
108, 1st Floor, UVAS, Lahore, during five working days till the last date mentioned in tender notice.
18. The successful bidder will submit stamp duty @ 0.25% of the total value of contract / purchase order at
the time of submission of bill to the end user.
19. Bids must be quoted on company’s letter pad duly signed stamped by the bidder
20. Please attach NTN, GST and professional tax certificates with bidding documents.
21. Please attach the copy of your FBR Active taxpayer serial Number list for the current financial
year.
22. Please read, sign all the tender documents, terms and conditions carefully and attached with your
bidding documents.
23. Please clearly mentioned Tender number, company name and address in front of envelop.
24. Please email tender documents positively in MS. Word form in following email I.D.
25. Any further information if required can be obtained during office hour from 8.00a.m to 4.00 pm
(Monday to Friday) from Purchase Cell, University of Veterinary and Animal Sciences, Lahore
We, M/s. ____________________________ hereby certify that we have read and agreed with
all terms and conditions mentioned above.
Signature: ________________________________
Designation: ________________________________
Dated: ________________________________
Stamp: ________________________________
Incharge Purchase Cell
University of Veterinary and
Animal Sciences, Sheikh Abdul
Qadir Jillani (Outfall Road)
Lahore
Tel: 042-99211449, Ext: 138
Tender Documents
Terms & Conditions
Please follow under mentioned terms strictly:
Please fill up proforma(s) instead of putting your own specification (mandatory)
Please quote rates in Pak Rupees.
One can mark additional features in concise way in Last Column, or can attach supporting
brochures. CDs or online links which are helpful for product details may be attached or
provided.
Bidder must be a distributor of quoted product
Bidder must have in house Authorized Service Center
Samples will be demanded as and when required or where applicable
(Lot No1)
S.# Article Qty Specification Origin
1. Embryo
Transfer
equipment with
Accessories
01 Multi-frequency OPU Probe 5.0-7.5-9.0 MHz
with needle guide and pack of 40 Needles.
Multi-frequency Rectal Probe 5.0-7.5-10.0 MHz.
Multi-frequency Convex Probe 2.8, 3.5 & 5.0
MHz.
All above probes must be electronic probes.
Ultrasound frequency range: 2-12 MHZ.
Ultrasound machine with standard 12” Large
LCD Monitor.
Wide range of viewing angle.
Measurement function: For small and large
animals. 256 Gray Scales. Cine Memory 250
frames.
Permanent Image Storage: Internal 100 images
and External USB memory.
Display Mode: B, B/B, B/Z, B/M,M. Depth
24cm.
Ports: USB Port. Built-in two probe connectors.
Backlit Alpha numeric Keyboard with Trackball .
8-TGC Slides with accessories including;
Compatible UPS, B/W Thermal Printer, Local
Trolley, Stabilizer, Dust Cover.
Company must have good back up services.
America/
Canada/Europe
/Japan
2. Walkin chiller
machine 8x8
01 Carcass Carrying Capacity: 2 Tons.
Required temperature 0’C/24hrs.
Required air velocity 1m/s.
Dimension: 20’ x 10’ x 14’ (L x W x H).
Insulation Material: Polyurethane, CFC Free,
Foamed in-place.
Insulation Thickness 100mm (4”).
Internal and external surface of hot-dip
galvanized steel sheet, pre-painted polyester
coating.
Assembling of panels, inclusive fitment of
profiles, Filling and caulking of silicon.
Supply and installation of a sliding door and
door-frame of the Size: 3’ x 8’ (h) complete with
Europe/Germa
ny/Japan or
equivalent
door hardware side rails, door handles etc.
Two Air Cooled Condensing Units Capacity =
5HP x 1 + 3 HP x 1, equipment suitable for
operation on 380V, 50Hz, 3 phase.
Two Evaporator Cooling Units with hot gas
defrosting suitable for operation on 380V, 50Hz,
3 phase. Model KHM 33-2 = 01 Nos. + KHM 21-
1 = 01 Nos.
Two separate electrical temperature monitoring
and control panels.
Installation of refrigeration system including
wiring, piping, pipe insulation between the
evaporator and the condensing unit up to a
distance of 20 feet, inclusive of gas charging and
commissioning.
Trusses and Shade over the room.
Wiring up to the electrical panel of chiller.
Lights.
All civil work of floor of the chiller.
Note: Included Transportation and installation of
the chiller at department of Meat technology,
Cholistan University of Veterinary and Animal
Sciences, Bahawalpur.
3. Processing /
Slaughtering
line (large &
small animals)
01 Overhead railing 2’ diameter M.S pipe, with all
fixture required for cattle slaughtering line. Must
be hot galvanized.
Dimension: Approx. 100 Running feet.
Line mounted Weighing scale to weight animal
carcasses.
Carcass lifter to lift carcass from ground up to the
carcass line.
Rust free Carcass hanging Rolling wheel hangers,
20 Nos. (With food grade stainless steel hooks).
Installation of the line in-place at department of
Meat Technology, Cholistan University of
Veterinary and Animal Sciences, Bahawalpur.
Pakistan/Italy
4. Florescent
Microscope
01 Optical System: Infinity Optical System
Illumination: High luminescent White LED
Illuminator (Eco-illumination) Minimum
Lifetime 55,000 hours
Controls: Image capture button
Eyepiece: 10x with Field of view 22mm
Focusing: Coaxial Coarse/Fine focusing,
Focusing stroke: 30 mm, Coarse: 9.33
mm/rotation, Fine: 0.1 mm/rotation Coarse
motion torque adjustable, Refocusing function
Trinocular tube:
Inclination angle 30° with adjustable inter-
pupillary distance.
3 light path bi/photo: 0/100, 50/50, 100/0.
Nosepiece:
USA / Europe /
Japan or
Equivalent
Reversed Sextuple nosepiece
Objectives:
Plan Achromat 4X N.A. 0.10 or more
Plan Achromat 10X N.A. 0.25 or more
Plan Achromat 20X N.A. 0.40 or more
Plan Achromat 40X N.A. 0.65 or more, Spring-
loaded
Plan Achromat 100X Oil N.A. 1.25 or more,
Spring-loaded
Stage:
Hard coated stage with Cross travel 78 (X) x 54
(Y) mm, with vernier calibrations, stage handle
height and torque adjustable for all stages.
Slide holder for 2 slides.
Condenser:
Achromat Swing-out Condenser, N.A. 0.90.
Polarizer Unit: Simple Polarizer and Analyzer for
Simple. Polarizing microscopy.
Fluorescence attachment with 100 watt mercury
lamphouse.
Fluorescence filter turret 4 or more places for
filters.
Fluorescence Filters: DAPI, FITC, TRITC.
Camera system with imaging and
measurement software
Minimum 5.9 Megapixel Color CMOS Camera
with USB 3.0 connectivity or equivalent
C-mount adapter
Exposure time: 100µ sec to 30 sec
Measurement software to do quantitative and
qualitative analysis.
Imaging software for image capturing, archiving,
analysis, documentation and Measurement.
The software should handle multi-dimensional
imaging flawlessly, with support for capture,
display, peripheral device control, and data
management and analysis.
XLEDs 50", online sinewave UPS 1 KVA with
battery backup (1 hour) (Nos 1)
Fluorescence Software Features:
Overlay Multiple images, Side by Side Image
Comparison, Movie Playback, Tile View,
Snap/Movie Acquision, Time-Lapse at Specified
Interval, Geometry/Combine/Filter Processing,
Region and Line Measurement, Object Counting
(Manual) warranty and free after sale service for
3 years post installation.
Dust Cover.
5. Multi needle
injector
01 Automatic stainless steel 8 needle brine, marinade
injector for chicken, mutton and beef with pump
and pucket.
China
Meat Smoking Machine
Small size smoker to be used for smoking beef,
chicken and fish.
(Lot No 2) 6. Thermocycler 01 The System capacity should be 1x96 well plate
or 96x0.2 ml tubes.
The instrument must be constructed with 3
separate heating/cooling elements below
each of the 3 metal blocks for precise PCR
optimization.
The instrument can be monitored remotely
via android/apple apps or laptop.
Instrument should have 8 inch TFT LCD.
Each pair of heating/ cooling elements and
segmented metal blocks must be insulated
completely from each other to prevent heat
interactions.
The instrument sample ramp rate should be
± 3.0 °C⁄sec
The instrument Peak block ramp rate should be
4.0 C/Sec
The instrument must have a safety feature
that should be designed to indicate to the
user when the sample block is above 50° C.
The instrument reaction volume range should
be 10-80 ul
The instrument temperature uniformity should
be <0.5 °C (20 sec after reaching 95 °C)
The instrument should have high throughput
capability.
10 °C (5 °C Zone-to-Zone with 3 zones)
Software must be included:
Software Specifications: Applications—
Comparative Ct, Standard Curve, Relative
Standard Curve, Genotyping Presence/Absence,
Melt Curve Analysis, high-resolution melt
(HRM) analysis.
Germany/Japan/
UK/USA or
equivalent
7. Thermo-
cycler
01 The instrument should be able to able to support
the full range of Taqman assays.
Optics: 4 emission filters, Blue LED excitation
source, photodiode. 4 targets multiplexing
Temp range: 4-100 C
Peaak block ramp rate: 4.6 C/S
Temp accuracy: 0.25°C (35 to 95°C) of display
temperature
The instrument should be capable to histories
fluorescence from FAM™/SYBR® Green I,
VIC™/JOE™, and ROX™ dyes.
perform Fast PCR reactions in less than 40
minutes
Gene expression analysis, pathogen quantitation,
EU/USA/Japan
SNP genotyping, and presence/absence,HRM.
assays. The instrument can be run in standard as
well as in the fast mode without change in
hardware.
Instrument software should be able to identify the
wells automatically.
The instrument should have a feature of Real-
time monitoring of amplification growth curves to
view run progress (can be viewed from a remote
PC).
The instrument must have 6 segmented insulated
block & each block should be insulated from each
othe.
Block for convenient PCR optimization consists
six independently controllable peltier blocks
together for precise temperature control and
enhanced PCR functionality
The instrument can be monitored remotely
The instrument can be run in standalone mode,
without a computer attached.
The instrument should include a touchscreen
interface that can store protocols for quick run
starts from the instrument without the need for a
computer.
The instrument must be supplied with compatible
software.
8. Water
Distillation
Plant
01 Technical Specifications:
Output: Pure water Type II (analytical grade)
according
ASTM D1193 (American Society for Testing &
Material)
Input: Tap water
Production: 1 l/min (60liters/hour)
Purification process control: By microprocessor
Installation requirements: 120/220V AC + water
supply (≤ 3 m. distance / ≥ 2 bar pressure)
Must be Equiped with Kit of Cartridges
Conductivity < 1 µS/cm
Dimensions (cm): Equipment 45x25x40
(Height/width/Depth)
Weight in operation: 8 kg
Feed Water Requirements
Maximum Pressure 6 Bar
Minimum Pressure 2 Bar
Temperature 5-35 ºC
Requirements:
- Electrical power 120/230 VAC, Plug earth
grounded, within 2 meter of the Micromatic
- Feed water: Should be close (3 meters max),
Pressure 2 bar (min), connector ½” BSP Male.
EU,USA,Japan
9. Water
Distillatory
01 Specifications: USA/EU/Japan
Apparatus
double
distillation
Dimensions: Width, 37 cm (14.6 in.); Height,
28.6 cm (11.3 in.); Depth (without cables), 42
cm
Operating temperature: 18-30ºC (64-86ºF).
Optical System: Up to 6 channels spanning
UV to infra-red wavelengths; Excitation
sources: High
Power: 100–240 V AC, 50–60 Hz,
Samples per run (throughput) Tubes: 0.2 ml;
Strip Tubes 0.1 ml (4 tubes); Rotor-Disc 72;
Rotor-Disc
Thermal performance: Temperature range, 35
to 99ºC; Temperature accuracy, ±0.5ºC (type,
Weight: 12.5 kg, standard configuration
10. Refrigerator
Centrifuge
01 The centrifuge Must be able to accommodate
15,50,ml tubes along with pcr plates.
The instrument must be capable of identifying the
rotor type automatically.
The rotational speed should be 17,500 revolutions
per minute 30,130xg or better.
Temprature range: -11 to +40 C
FastTemp function: quick pre-cooling of the
centrifuge, e.g. from ~ 21 °C to 4 °C in only 8
minutes
Built-in condensation drain: to eliminate water
accumulation in the rotor chamber
The instrument rotor should must have
OptiBowl design.
Brushless maintenance free drive.
The instrument rotor should must have quick lid
lock option which lock the rotor in only ¼ turn
The noise level should be less than 54 Db(A) with
fixed angle rotor.
All the aerosol-tight rotor lids must be certified
by a third certified source.
Should Must have soft brake function.
Additional accessories:
rotor to accommodate 6x15 ml tubes
Rotor for 6x50 ml tubes
1.5/2 ml x 48 tubes
Adaptors for 15 ml
Adaptors for 50 ml
Germany/Japan/
UK/USA or
equivalent
11. Microtome
with
Accessories
01 Fully automatic precision Microtome
Key Features:
2 Specimen feed memory positions
Intuitive control panel
Section counter (Stroke / Distance)
Germany/ Japan
or Equivalent
Spacious, integrated section waste tray
Wide range of accessories
Specifications:
Section thickness setting range: 0.5 – 100 μm
Section thickness selection: 0 - 2 μm in 0.5-μm
steps, 2 - 20 μm in 1-μm steps, 20 - 50 μm in 2-
μm steps, 50 – 100 μm in 5-μm steps
Trimming thickness: 0 – 300 μm
Specimen feed: 28 mm (step motor)
Specimen feed speed SLOW: 75 / 150 / 300 / 600
μm/s
Knife holder - north-south axis: 24 mm
Dust Cover
12. Automatic
tissue
processor
01 Automatic Tissue Processor
Easy loading and full process control by
rotating table principle.
Integrated UPS system protects your
samples.
Delayed start function (Delayed Start time up
to 99 hours).
Operation manual and software if required.
Reagent beakers (Nos 10)
Volume: 2000 ml
Material: White, POM
Electrically heated Paraffin beakers (Nos 2)
Volume: 2000 ml
Material: Aluminum, double walled
Transport basket (Nos 1)
Material: 1x Stainless steel
Volume: 120 cassettes
Programming
20 programs (Freely programmable)
Europe/USA/Japan
/China/Korea
13. Automatic
Stainer
(Histopatholo
gy)
01 Easy loading and full process control
histopathology automatic stainer
12x Staining cuvettes (white, plastic)
2x transport basket (capacity 30 slides)
Operating temperature range: +10 to +35°C
Temperature range during storage: +5°C to
+55°C
Programming: Quick Start, 20 programs (Freely
programmable)
Delayed Start time: up to 99 hours
Integrated UPS system
Dust Cover
Europe/USA/Japan
/China/Korea
14. Operation
Lights
01 1. Human Operation theater lights also
appreciable (3 quantity)
1. Dome Head 712 mm & 550 mm
2. Halogen Bulbs 4V x 70 W x 11 nos
3. Illumination Intensity at 1m 90,000 &
Local/Imported
50,000 Lux
4. Height Adjustment 714 mm & 912 mm
5. Parabolic Reflector 180 mm
6. Color Temperature 4200 K ±300
7. Control Unit Transformer
2. Hot sale stainless steel hand washing sink
for operation theatre hospital (1 quantity)
1, Full automatic induction or foot, touch
water ways, avoid the medical personnel's
hand touch, wash your hands effectively
prevent cross infection.
2, Being equipped with 40-50 L water
heaters and constant temperature water
supply equipment, water temperature can
be used according to the customer's habits
20 °, 75 ° set freely.
3, Pool internal use, seamless welding arc
Angle, depth of grinding, polishing
processing. No dead Angle, easy to clean
disinfects processing, effectively prevent
bacterial growth.
4. The form a complete set of equipment
is perfect, is equipped with automatic
dosing machine, was awarded two
national patents of high-temperature
washing brush and a brush. High
efficiency filter, lighting and ready anti-
fog mirror auxiliary equipment, washing
hands make into enjoyment.
5. A variety of models, multiple series of
products for customers to choose can be
used according to the customer demand
production and processing.
3. Operating Theatre waste bin without push
handle (3 in quantity)
Operating room waste bin
Material: Stainless steel
Capacity: 15 litres
∅ foot chassis: 45cm
4 castors with a ∅ of 5cm
Available with or without push handle
Height without push handle: 42.5cm /
Height with push handle: 82.5cm
4. Automatic washing machine 13 Kg one
quantity washing capacity along with 100 large
sized towel (1 quantity)
15. Water purifier
with UV lamp
04 Tap to pure and ultra pure water purification
system (100V-240V/50-60Hz) ultra pure (type 1)
product water quality resistivity 18.2MΩ.cm@25
C, production flow rate 3-5liter @25 C+ 15%.
Instant flow rate (with applilcations pak final
filter). >0.5 liters per minutes
TOC (w/o 185/254nm UV lamp) <10ppb
TOC (with 185/254 nm UV lamp) <5ppb
Particulate (size >0.22 um) < 1 particulate /ml
Bacteria <0.1cfu/ml
Endotoxins (pyrogens)<0.001 EU/ml
RNases<0.01ng/ml
DNases<4pg/ul
One extra consumable packages should be
included
Any other accessories /software required the
operation of equipment
Warranty and free after sale and services for 3
years post installations
Allied accessories
power supply
All accessories needed for installation
Services and repair facilities should be available
in Pakistan
Dust cover
China/Local
16. Dissection
Microscope
Stereo
05 Specifications
Other features:
Stable cast iron round base with pillar
focusing with rack & pinion.
Accurate and stable metal stage covering with
glass plate with clips.
Eye Piece: Optical Tube 10x, 20x mounted on
jointed arms allowing to whole area to be
scanned.
Complete in box
Magnification 20
Power Supply Power plug
Lighting Incident light and transmitted lig
ht
Lamp type 12V/ 10W tungsten lamp
Image scale 2
Type of build binocular
Germany/ Japan
or Equivalent
17. Vacuum
pump with
filtering unit
03 Vacuum system for evaporation and distillation in
combination with rotary evaporators and gel
dryers.
Capacity:
Minimum pumping speed @ 50/60Hz - 16/18L/min
(pump without oil)
Ultimate pressure: < 8mbar
Vacuum control: Manual
Vacuum gauge: Digital
Overall dimensions (L x W x H) – 360x310x445 mm
All accessories with filter unit, 0.2 μm
hydrophobic PTFE, 10/pk, Tubing , Vacuum
filtering flask, 1 L , No 8 stopper, 9.5 mm (3/8
in.) hole, silicone, 5/pk
18. Filtration
Assembly
(Glass)
02 100% borosilicate glass with fritted glass filter
base.
Anodized Aluminium spring clamp
Suction capacity/filter diameter: 47 mm
Effective filtration area: 9.6 cm2
Funnel capacity: 300 mL
Flask capacity: 500 mL/Liter
Europe/USA/Japan
or Equivalent
19. Deep freezer
02 Specifications:
Required Temperature: -20°C to -40oC
Effective capacity 482 Liter.
Two chamber Vertical Freezer Defrosting, Fast Freezing , Icebox
Connection Power 230/240V 50Hz
China/Local
20. Autoclave
Vertical
04 Vertical Autoclave (02)
Horizontal Autoclave (02)
Digital Microprocessor Controlled unit,
Temperature Range 105 to 135º C
Interior Chamber Stainless steel,
capacity 65 Lit capacity (chamber dimension: 400
x 500mm),
with Built in Timer 1 to 250 Minutes, Pressure
Gauge 0 to 0.4 mpa,
Selected Modes for Liquid and Solids,
Forced cooling Fan as standard function, Drain:
Temperature-resistant installation (103˚C in case
of failure),
Temperature controlled at 70˚C (setable) Drain
height max. 40cm above the floor, High
Temperature/pressure cut-off, sensor wire
breakage detector.
Securely closed lid check function.
Local/Imported
Electric leakage breaker and over current
detector.
Pressure Safety valve.
Exhaust bottle ready-to-use check system. Lack-
of-water prevention device.
Warranty and free after sale service for 3 years
post installation,
Dust Cover,
(Lot No 3) 21. Laboratory
Egg
Incubator
01 Automatically Alarming Eggs Turning Humidity
Control Egg Incubator. Technical Parameters: The
edge covered by aluminum alloy. Hatching Rate~94%;
Temperature Range~0~98.9ºC; Temperature
Precision~±0.1.5ºC; Humidity Range~0~98.9%RH;
Humidity Precision~±4.9%RH LCD Display~ Real -
time and Setting Temperature/Humidity; Alarm ~
Audio and visual alarm for: High or low temperature,
high or low humidity
22. Egg candlar
(2+3)
02 Portable LED battery/mains operated egg candling
lamp.
It must allow the user to candle both white and brown
eggs in any environment.
Specifications:
LED : 10 Watt
Max Output (Luminous Flux): 1000 Lumens
LED life : 50,000 hours
Battery : Lithium ion battery, 4400mAh
Battery Run time : 180 minutes (100% brightness)
Battery lifespan : Rechargeable 500-800 times
Power supply : 110-230 V
Dust cover
Europe/USA
/Japan or
Equivalent
23. Egg
incubator
01 Specifications:
Material;
Outer Body: M.S Sheet and Powder Coating Painted
Heavy Gauge
Inner Body: S.S Sheet 304 or Aluminum Sheet
Egg incubator Numbers of trays ≥10
Capacity:
500 eggs
Temperature control 25 to 70° C
Digital Timer: Tilting Control Automatically and
control by Digital Timer
20 to 75 % Humidity control
Automating Turning of eggs
Power Supply: V220 - 230
Frequency: ~50-60Hz
Dimensions: 5ft L x3ft W x 6ftH
Dust Cover
Europe/USA
/Japan or
Equivalent
24. Electric
De-beaker
01
By chain bar drive components a built-in Low-speed
motor drives electric thermal movable blade up and
Local/Import
ed
down, and automatically fix position with beak cutter
blade in order to trim beak quickly and stop bleeding in
time. Temperature of movable blade should be
adjustable to be reddish or nacarat.
Voltage – 220 V
Temperature range of movable blade :700-900°C
Beak trimming rate :1800pcs/hr
Blade stoping time :0-4seconds
Redish time: <30seconds
25. Chick sexer
(sexoscope)
01 Exposure time 1/160 sec (0.00625)
F-number f/2.8
Lens focal length 5.8 mm
Orientation Normal
Horizontal resolution 180 dpi
Vertical resolution 180 dpi
Y and C positioning Centered
Exif version 2.2
Image compression
mode 5
APEX shutter speed 7.3125
APEX aperture 2.96875
APEX exposure bias 0
Maximum land
aperture 2.96875 APEX (f/2.8)
Metering mode Pattern
Flash Flash did not fire, compulsory
flash suppression
Supported Flashpix
version 0,100
Color space sRGB
Focal plane X
resolution 4,571.4285714286
Focal plane Y
resolution 4,571.4285714286
Focal plane resolution
unit inches
Sensing method One-chip color area sensor
File source Digital still camera
Custom image
processing Normal process
Exposure mode Auto exposure
White balance Auto white balance
Digital zoom ratio 1
Scene capture type Standard
Local/Import
ed
26. Fodder
Chopper
01 Capacity: 10ton/hour; Cut Size: 5 to 20mm
(adjustable); Number of cutting blades: 6; Required
electric power: 20hp; Operative version: Electric; Two
extra gears to adjust the size of chopped forage;
Cutting wheel RPM 999; Main frame: heavy duty mild
steel channel; Hitch: heavy duty milk steel box
27. Head
Catcher/Hea
d Locks
02 8 head locks (sub-unit) in each unit head lock; Clump
3mm width; Total nut bolt SS-304 material (non-
magnet); Height 3 feet; Width 2 feet/unit; Neck rail 12
gauge pipe; For post pipe quality of IILM- pipe
28. Shower
System
02 To be installed in animal shed of length of 90 feet and
105 feet long: Motor pump: 5hp; 1.5 inch PVC pipe D
class; Tank 1000 gallon; Mist nozzle (plastic) × 40; DP
box/control panel
29. Sample
grinder
01 Laboratory Mill/sample grinder
Features:- Must have Dust protected main safety switch
Gearless speed control
Illuminated speed- and status display
Funnel with hinged lid
Refilling during operation is possible depending on the
product
Tight-fitting stodger in grinding chamber for
subsequent application of pressure
Tool free sieve change
Motor must stop when opening grind chamber
Technical Specifications
Funnel volume
300 ml
Product discharge
For collection tubes with norm grinding
NS29
Sieves
0.2 to 6 mm mesh size
Grinding attachments (convertible)
Hammer attachment
Cutting attachment
Motor
Wear-free three-phase motor
Gearless direct drive
Security system auto-off
Drive power
1000W
Speed range
50 to 6‘000 rpm
Sound level (without load)
70 dB(A) for 6‘000 rpm
Supply voltage
100 - 230 V ± 10%, 50Hz / 60Hz
China/Local
Maximum relative humidity
80 % in storage
80 % during operation
Operating temperature
0 – 40 °C
Protection class according to DIN
IP 20
Dimension (L x W x H)
325 x 251 x 480 mm
Allied accessories
All accessories needed for installation
Services and repair facilities should be available in
Pakistan
Dust cover
30. Egg
Incubator
with setter
for 2000-
2592 eggs
01 Setter:
Machine which is designed by high grade
material including many stainless steel internal
components.
Numbers of layers ≥10
Capacity 2592 eggs of Gallina, Anatra,
Germano, Hen, Duck and Mallard, 3528 eggs of
Fagiana and Pheasant, 6120 eggs of Starna,
Quaglia ,Partridge and Quail, 4536 eggs of
Pernice rossa and Red leg , 1800 eggs of
Tacchina and Turkey, 1008 eggs of Oca and
Goose,
Precision of temperature control ≤±0.1C
Temperature and Humidity control and Digital
control with all types of setting trays ,
Automating Turning of eggs ,
Power Supply V220 - 230~50-60Hz ,
Dimensions 5ftLx3ftWx6ftH,
Net Weight 197kg, Package; 1
unit/carton/wooden box,
Application: farm and laboratory;
Warranty and free after sale services for three
years post installation
Hatcher:
Hatcher Machine which is designed by high
grade material including many stainless steel
internal components. Temperature and humidity
digital control
capacity 864 eggs of Gallina, Anatra, Germano,
Hen, Duck and Mallard, 1176 eggs of Fagiana
and Pheasant, 2040 eggs of Starna, Quaglia,
Partridge and Quail, 1512 eggs of Pernice rossa
and Red leg, 600 eggs of Tacchina and Turkey,
336 eggs of Oca and Goose.
Power Supply V220 - 230~50-60Hz,
Dimension 3.3L x 3.3Wft x 4.1ftH
EU/Japan/
USA
Net Weight 120Kg
31. Feed Mix
Van
01 Feed Mixer Van (TMR wagon)
Digital display scale
Feed mixing capacity = 2 tonns
Augers = vertical
Number of augers = 2
Distribution type = Right and left side delivery
Power requirement PTO (HP) =60-75
Can be linked to TMR software
Additional accessories to connect with tractor =
connecting materials along with hydraulic kit
Turkey/
Europe
32. Hay Balers
01 Round balers
Pick-up width = 2.10 meter
Crop feed = HD ROTO CUT
Number of knives= 25 (0, 12, 13, 25)
Number of rollers = 16
Bale diameter= 1.25–1.35 meter
Bale ejector= Standard
Automatic chain lubrication Standard
Europe/USA
/Japan
33. Bailer press 01 Bale press
Hay bale double compress
Double hydrallic
Mobile type
Finished bale size
Length=25 inches
Width=18 inches
Height =18 inches
China/ locally
manufactured
34. Necropsy
Table
(Hydraulic
operated)
01 Hydraulic Postmortem Table (Large Animals)
Size: 8 x 4feet
Material: Stainless steel
Jack system with foundation and shocks against 800Kg
weight
Drain system with back side slope
2 Tap for washing system
Fork lifter
Loading capacity minimum 3000 kg (3 ton)
Lifting height capacity from ground level to 6 feet
Power source: Diesel/Electric
Local/Imported
Technical Evaluation Criteria:
The Bidders who have duly complied with the Eligibility / Qualification and Evaluation Criteria will
be eligible for further processing.
The Bids which do not conform to the Technical Specifications or Bid conditions or Bids from the
Bidders without adequate capabilities for supply of Goods/Items/Services will be rejected.
The Eligible/Technically Qualified Bidders will be considered for further evaluation.
The Technical proposals shall be evaluated by the technical evaluation committee in the light of
following evaluation criteria as per PPRA Rules:
Category
Description
Points
Legal (Mandatory)
Certificate of Company/ Firm Registration /
Incorporation under the laws of Pakistan.
Mandatory
Valid Income Tax Registration. Mandatory
Valid General Sales Tax Registration (Status =
Active with FBR as on the date of submission)
Mandatory
Submission of undertaking on legal valid and
attested stamp paper that the firm is not
blacklisted by any of Provincial or Federal
Government Department, Agency, Organization
or autonomous body or Private Sector
Organization anywhere in Pakistan.
Mandatory
Compliance to the technical specifications of all
items to be procured.
Mandatory
Eligibility Criteria Must have 3 Years’ Experience as Authorized
Distributor / Dealer of the quoted product.
Mandatory
Minimum 5 Deployment for the Same Class of
Equipment with Govt. / Semi Govt. / private
Departments and public sector.
Mandatory
For warranty and after sales support a parts
hub/storage facility should be in Pakistan
Mandatory
Note:
Verifiable documentary proofs for all above requirements are mandatory.
Vendors/ Suppliers will be responsible for installation, inspection, demonstration and
configuration of the supplied equipment in client environment as per client's requirements
Brand and Model Number of quoted equipment must be mentioned.
Technical Brochures of quoted equipment must be attached with bid.
Software required to run the equipment must be supplied by vendor where applicable.
PARAMETERS OF TECHNICAL EVALUATION CRITERIA The Firm/Company securing less than 70% marks will be disqualified
Total Marks 100 Qualification Marks 70 (70%)
Firm has to Produce Income Tax Registration and General Sales Tax Registration.
Firm must have 3 Years’ Experience as Distributor/ Dealer of the quoted product for Pakistan.
Firm Must have office in Pakistan.
Category Description Marks
Legal (Mandatory)
Certificate of Registration/ Incorporation 5
Income Tax Registration 5
General Sales Tax Registration 10
Undertaking that the firm is not blacklisted and
involved in litigation with Government
5
Must have 3 Years’ Experience as Distributor// Dealer
of the quoted product.
10
Relevant Experience
3 to 8 years 5
9 to 14 10
15 and above 15
Financial / Experience
Audited Annual Net
Turnover
(Max Points 10)
Rs. 10-25 million 2.5
Rs. 26-50 million 5
Rs. 51-100 million 7.5
Rs. 101 million or above 10
Audited Financial Reports
(Max Points 7.5)
For the Past 3 Years 2.5
Marks for Each Year
Income Tax Returns
(Max points 7.5)
For the Past 3 Years 2.5
Marks for Each Year
Number of items (Supply
of Relative equipment to
Government / Semi
Government, Public
Sector) in the Past 3 Years
(Max Points 10)
1 - 3 2
4 - 6 4
7 - 9 6
10 - 12 8
13 or above 10
Human Resource
Total No of Technical
Employees (Max Points
10)
0 – 5 3 Points
5 – 10 6 Points
11 or above 10 Points
Company Website Accomplished with Complete Products specification
and Details (Max Points 10)
10 Points
Government /
Semi Government Projects
At least 05 similar or above nature Projects worth of
Rs. 3 Million and above in Government / Semi
Government Departments in last three years.
(Max Points 10)
10 Points
(02 Marks for Each
Project)
Delivery at Cholistan University of Veterinary & Animal Sciences, Bahawalpur
Qaisar Iqbal
Project Manager (F&P)
CUVAS, Bahawalpur