templatecobem2011

8
Proceedings of COBEM 2011 21 st Brazilian Congress of Mechanical Engineering Copyright © 2011 by ABCM October 24-28, 2011, Natal, RN, Brazil INSTRUCTIONS FOR FORMATTING THE PROCEEDINGS PAPERS OF THE COBEM2011 (TIMES NEW ROMAN, BOLD, SIZE 14) First Author’s Name, e-mail (Times New Roman, Bold, size 10) Second Author’s Name, e-mail (Times New Roman, Bold, size 10) Institution and address for first and second authors – if the same (Times New Roman, size 9) Third Author’s Name, e-mail (Times New Roman, Bold, size 10) Institution and address for third author (if the same of first and second, put altogether) (Times New Roman, size 9) Same format for other authors, if any Abstract. The purpose of these instructions is to serve as a guide for formatting papers to be published in the Proceedings of the COBEM 2011. The abstract should describe the objectives, the methodology and the main conclusions of the paper in less than 3,000 characters in a single paragraph. It should not contain neither formulae nor reference to bibliography. The abstract will be included in a printed volume to be distributed to the symposium participants, whilst the full paper will be published in the proceedings CD- ROM. Therefore, it is necessary to keep the abstract updated in the database (Author's Area). (Times New Roman, italic, size 10) Keywords: keyword 1, keyword 2, keyword 3 … (up to 5 keywords) (Times New Roman, italic, size 10) 1. INTRODUCTION (Times New Roman, bold, size 10) The proceedings of the COBEM 2011 will be published in the proceedings CD- ROM, in Adobe™ pdf format. The papers must be formatted strictly according to these instructions. The present file can be used as a template for Microsoft Word™ users (for LaTeX™ users another template is available in the COBEM 2011 web site). Also, it should be used as a formatting guide to users of other text processing software. The papers are limited to a maximum of 10 pages, including tables and figures. The final pdf file must not exceed 2.0 Mb. 2. TEXT FORMAT The manuscripts should be written in English, typed in A4 size pages, using font Times New Roman, size 10, except for the title, authors’ affiliation, abstract and keywords, for which particular formatting instructions are indicated above. Single space between lines is to be used throughout the text. The text block that contains the title, the authors’ names and affiliation, the abstract and the keywords must be indented 0.1 cm from the left margin and marked by a leftmost black line border of width 2 1/4 pt. The first page must have a top margin of 3 cm and all the other margins (left, right and bottom) must have 2 cm. All the other pages must be set with all margins equal to 2 cm. PAGES SHOULD NOT BE NUMBERED

Upload: giordano-vieira

Post on 02-Apr-2015

429 views

Category:

Documents


1 download

TRANSCRIPT

Page 1: TemplateCOBEM2011

Proceedings of COBEM 2011 21st Brazilian Congress of Mechanical EngineeringCopyright © 2011 by ABCM October 24-28, 2011, Natal, RN, Brazil

INSTRUCTIONS FOR FORMATTING THE PROCEEDINGS PAPERSOF THE COBEM2011 (TIMES NEW ROMAN, BOLD, SIZE 14)

First Author’s Name, e-mail (Times New Roman, Bold, size 10)Second Author’s Name, e-mail (Times New Roman, Bold, size 10)Institution and address for first and second authors – if the same (Times New Roman, size 9)

Third Author’s Name, e-mail (Times New Roman, Bold, size 10)Institution and address for third author (if the same of first and second, put altogether) (Times New Roman, size 9)

Same format for other authors, if any

Abstract. The purpose of these instructions is to serve as a guide for formatting papers to be published in the Proceedings of the COBEM 2011. The abstract should describe the objectives, the methodology and the main conclusions of the paper in less than 3,000 characters in a single paragraph. It should not contain neither formulae nor reference to bibliography. The abstract will be included in a printed volume to be distributed to the symposium participants, whilst the full paper will be published in the proceedings CD-ROM. Therefore, it is necessary to keep the abstract updated in the database (Author's Area). (Times New Roman, italic, size 10)

Keywords: keyword 1, keyword 2, keyword 3 … (up to 5 keywords) (Times New Roman, italic, size 10)

1. INTRODUCTION (Times New Roman, bold, size 10)

The proceedings of the COBEM 2011 will be published in the proceedings CD-ROM, in Adobe™ pdf format.The papers must be formatted strictly according to these instructions. The present file can be used as a template for

Microsoft Word™ users (for LaTeX™ users another template is available in the COBEM 2011 web site). Also, it should be used as a formatting guide to users of other text processing software.

The papers are limited to a maximum of 10 pages, including tables and figures. The final pdf file must not exceed 2.0 Mb.

2. TEXT FORMAT

The manuscripts should be written in English, typed in A4 size pages, using font Times New Roman, size 10, except for the title, authors’ affiliation, abstract and keywords, for which particular formatting instructions are indicated above. Single space between lines is to be used throughout the text.

The text block that contains the title, the authors’ names and affiliation, the abstract and the keywords must be indented 0.1 cm from the left margin and marked by a leftmost black line border of width 2 1/4 pt.

The first page must have a top margin of 3 cm and all the other margins (left, right and bottom) must have 2 cm. All the other pages must be set with all margins equal to 2 cm.

PAGES SHOULD NOT BE NUMBEREDThe body of the text must be justified. The first line of each paragraph must be indented by 0.5 cm. Sufficient

information must be provided directly in the text, or by reference to widely available published work. Footnotes should be avoided.

All the symbols and notation must be defined in the text. Physical quantities must be expressed in the SI (metric) units. Mathematical symbols appearing in the text must be typed in italic style.

Bibliographic references should be cited in the text by giving the last name of the author(s) and the year of publication, according to the following examples: “Recent work (Soviero and Lavagna, 1997)” or “Recently, Soviero and Lavagna (1997)”. In the case of three or more authors, the form “Soviero et al. (1997)” should be used. Two or more references having the same authors and publication year must be distinguished by appending “a”, “b”, etc., to the year of publication. For exemple: “Recent work (Soviero and Lavagna, 1997a)”

Acceptable references include journal articles, numbered papers, dissertations, theses, published conference proceedings, preprints from conferences, books, submitted articles (if the journal is identified) and private communications. Internet sites can also be cited as references (MLA, 2004)

References should be listed at the end of the paper according to instructions provided in Section 4.

Page 2: TemplateCOBEM2011

Proceedings of COBEM 2011 21st Brazilian Congress of Mechanical EngineeringCopyright © 2011 by ABCM October 24-28, 2011, Natal, RN, Brazil

2.1. Section titles and subtitles

The section titles and subtitles must be aligned at left, typed with Times New Roman, size 10, bold style font. They must be numbered using Arabic numerals separated by points. No more than 3 sublevels should be used. One single line must be included above and bellow each section title/subtitle.

2.2. Mathematical equations

The mathematical equations must be indented by 0.5 cm from the left margin. They must be typed using Times New Roman, italic, size 10 pt. font. Arabic numerals must be used as equation numbers, enclosed between parentheses, right-aligned, as shown in the examples below. Equations should be referred to either as “Eq. (1)” in the middle of a phrase or as “Equation (1)” in the beginning of a sentence. Matrix and vector quantities can be indicated either by brackets and braces, as in Eq. (1), or in bold style, as in Eq. (2). Symbols used in the equations must be defined immediately before or after their first appearance.

One blank line must be included above and below each equation.

(1)

(2)

2.3. Figures and tables

Figures and tables should be placed in the text as close as possible to the point they are first mentioned and must be numbered consecutively in arabic numerals. Figures must be referred to either as “Fig. 1” in the middle of a phrase or as “Figure 1” in the beginning of a sentence. The figures themselves as well as their captions must be centered in the breadth-wise direction. The captions of the figures should not be longer than 3 lines.

The legend for the data symbols as well as the labels for each curve should be included into the figure. Lettering should be large enough for ease reading. All units must be expressed in the S.I. (metric) system.

One blank line must be left before and after each figure.

Figure 1. Diagram of shear modulus versus frequency at 303 K

Page 3: TemplateCOBEM2011

Proceedings of COBEM 2011 21st Brazilian Congress of Mechanical EngineeringCopyright © 2011 by ABCM October 24-28, 2011, Natal, RN, Brazil

Color figures and high quality photographs can be included in the paper. To reduce the file size and preserve the graphic resolution, figures must be saved into GIF (figures with less than 16 colors) or JPEG (for higher color density) files before being inserted in the manuscript.

Tables must be referred to either as “Tab. 1” in the middle of a phrase or as “Table 1” in the beginning of a sentence. The tables themselves as well as their titles must be centered in the breadth-wise direction. The titles of the tables should not be longer than 3 lines. The font style and size used in the tables must be similar (both in size and style) to those used in the text body. Units must be expressed in the S.I. (metric) system. Explanations, if any, should be given at the foot of the tables, not within the tables themselves.

One blank line must be left before and after each table.The style of table borders is left free. An example is given in Tab. 1.

Table 1. Experimental results for flexural properties of CFRC-4HS and CFRC-TWILL composites. Span/depth ratio = 35:1. Average results of 7 specimens.

Composite Properties CFRC-TWILL CFRC-4HS

Flexural Strength (MPa)(1) 209 10 180 15Flexural Modulus (GPa)(1) 57.0 2.8 18.0 1.3

Mid-span deflection at the failure stress (mm) 2.15 1.90 6.40 0.25 (1) : measured at 25°C

3. ACKNOWLEDGEMENTS

This optional section must be placed before the list of references.

4. REFERENCES

The list of references must be introduced as a new section, located at the end of the paper. The first line of each reference must be aligned at left. All the other lines must be indented by 0.5 cm from the left margin. All references included in the reference list must have been mentioned in the text.

References must be listed in alphabetical order, according to the last name of the first author. See the following examples:

ABCM, 2004. “Journal of the Brazilian Society of Engineering and Mechanical Sciences”. 1 Feb. 2007, <http://www.abcm.org.br/journal/index.shtml.>

Bordalo, S.N., Ferziger, J.H. and Kline, S.J.,1989, “The Development of Zonal Models for Turbulence”, Proceedings of the 10th Brazilian Congress of Mechanical Engineering, Vol.1, Rio de Janeiro, Brazil, pp. 41-44.

Coimbra, A.L., 1978, “Lessons of Continuum Mechanics”, Ed. Edgard Blücher, S.Paulo, Brazil, 428 p.Clark, J.A.,1986, Private Communication, University of Michigan, Ann Harbor.MLA, 2004. “How do I document sources from the web in my works-cited list?” Modern Language Association. 22

Feb.2007 <http://www.mla.org>.Soviero, P.A.O. and Lavagna, L.G.M., 1997. “A numerical model for thin airfoils in unsteady motion”. RBCM –

Journal of the Brazilian Society of Mechanical Sciences, Vol. 19, No. 3, pp. 332–340. Sparrow, E.M., 1980, ”Forced Convection Heat Transfer in a Duct Having Spanwise-Periodic Rectangular Protuberances”, Numerical Heat Transfer, Vol.3, pp. 149-167.

5. RESPONSIBILITY NOTICE

The following text, properly adapted to the number of authors, must be included in the last section of the paper:The author(s) is (are) the only responsible for the printed material included in this paper.

Page 4: TemplateCOBEM2011

Proceedings of COBEM 2011 21st Brazilian Congress of Mechanical EngineeringCopyright © 2011 by ABCM October 24-28, 2011, Natal, RN, Brazil

Tradução do inglês para portuguêsINSTRUÇÕES PARA FORMATAÇÃO DE TRABALHOS TRABALHOS DA COBEM2011 (Times New Roman, negrito, tamanho 14)

Nome do autor, e-mail (Times New Roman, negrito, tamanho 10) Nome do Segundo Autor, e-mail (Times New Roman, negrito, tamanho 10) Instituição e endereço dos autores, primeiro e segundo - se o mesmo (Times New Roman, tamanho 9)

Nome do terceiro autor, o e-mail (Times New Roman, negrito, tamanho 10) Instituição e endereço para correspondência, (se o mesmo do primeiro e segundo, colocar no seu conjunto) (Times New Roman, tamanho 9)

Mesmo formato para outros autores, se houver

Abstrato. O objectivo destas instruções é servir como um guia para formatação de trabalhos a serem publicados nos Anais do COBEM 2011. O resumo deve descrever os objetivos, a metodologia e as principais conclusões do papel em menos de 3.000 caracteres em um único parágrafo. Ele não deve conter nem fórmulas, nem referência a bibliografia. O resumo será incluído em um volume impresso para ser distribuído aos participantes do Congresso, enquanto o trabalho completo será publicado nos processos de CD-ROM. Portanto, é necessário manter o resumo atualizado no banco de dados (Área do Autor). (Times New Roman, tamanho, itálico 10)

Palavras-chave: palavra 1, palavra 2, 3 ... palavra-chave (até 5 palavras-chave) (Times New Roman, itálico, tamanho 10)

1. INTRODUÇÃO (Times New Roman, negrito, tamanho 10)

Os trabalhos do COBEM 2011 serão publicados nos anais do CD-ROM, em formato Adobe PDF ™. Os trabalhos devem ser formatados estritamente de acordo com estas instruções. O arquivo texto pode ser usado como modelo para os usuários do Microsoft Word ™ (para LaTeX ™ usuários outro modelo disponível no site do COBEM 2011). Além disso, ele deve ser usado como um guia de formatação para usuários de outros softwares de processamento de texto. Os trabalhos são limitados a um máximo de 10 páginas, incluindo tabelas e figuras. O arquivo final em formato pdf não deve exceder 2,0 Mb.

2. TEXT FORMAT

Os trabalhos deverão ser escritos em Inglês, digitadas em papel tamanho A4, utilizando fonte Times New Roman, tamanho 10, exceto para o título, afiliação dos autores, resumo e palavras-chave, que têm formatações específicas indicadas acima. Espaço simples entre linhas deve ser usado em todo o texto. O bloco de texto que contém o título, os nomes dos autores e filiação, o resumo e as palavras-chave deve ser recuado 0,1 centímetros da margem esquerda e marcado por uma borda de linha mais à esquerda preta da largura de 2 1 / 4 pt. A primeira página deve ter uma margem superior de 3 cm e todas as outras margens (esquerda, direita e inferior) devem ter 2 cm. Todas as demais páginas deve ser definido com todas as margens iguais a 2 cm. Páginas não deverão ser numerada O corpo do texto deve ser justificado. A primeira linha de cada parágrafo deve ser recuado de 0,5 cm. Informações suficientes devem ser fornecidos diretamente no texto, ou por referência a obra publicada amplamente disponível. Notas de rodapé devem ser evitadas. Todos os símbolos e notação devem ser definidos no texto. quantidades físicas devem ser expressas na (métrico) SI de unidades. Os símbolos matemáticos que aparecem no texto devem ser digitados em itálico. As referências bibliográficas devem ser citadas no texto, dando o sobrenome do autor (es) e ano da publicação, de acordo com os seguintes exemplos: "Um trabalho recente (Soviero e Lavagna, 1997)" ou "Recentemente, Soviero e Lavagna ( 1997 "). No caso de três ou mais autores, a forma "Soviero et al. (1997) "deve ser usado. Duas ou mais referências com os mesmos autores e ano da publicação deve ser diferenciado, acrescentando "a", "b", etc, para o ano de publicação. Por exemplo: "Um trabalho recente (Soviero e Lavagna, 1997a)" referências aceitas incluem artigos de revistas, papéis numerados, dissertações, teses, anais de conferências publicadas, pré-publicações de conferências, livros, artigos submetidos (se a revista for identificada) e as comunicações privadas. sites da Internet também podem ser citados como referências (MLA, 2004) As referências devem ser listadas no final do trabalho de acordo com instruções fornecidas na secção 4.

Page 5: TemplateCOBEM2011

Proceedings of COBEM 2011 21st Brazilian Congress of Mechanical EngineeringCopyright © 2011 by ABCM October 24-28, 2011, Natal, RN, Brazil

2.1. títulos e subtítulos das seções

Os títulos e subtítulos das seções devem ser alinhados à esquerda, digitados em fonte Times New Roman, tamanho 10, estilo negrito. Devem ser numeradas com algarismos arábicos separados por pontos. Não mais de 3 subníveis devem ser usados. Uma linha simples deve ser incluída acima e abaixo de cada título / subtítulo.

2.2. As equações matemáticas

As equações matemáticas devem ser recuado de 0,5 cm da margem esquerda. Eles devem ser digitados em fonte Times New Roman, tamanho 10 pt itálico. fonte. algarismos arábicos, devem ser utilizados como números de equação, colocada entre parênteses, alinhado à direita, como mostrado nos exemplos abaixo. As equações devem ser referidas por Eq. (1) "no meio de uma frase ou como" Equação (1) "no início de uma frase. quantidades de matriz e vetor pode ser indicada por colchetes e chaves, como na equação. (1), ou em negrito, como na equação. (2). Os símbolos usados nas equações devem ser definidos imediatamente antes ou após a sua primeira aparição. Uma linha em branco deve ser incluída acima e abaixo de cada equação.

 (1)

 (2)

2.3. Figuras e tabelas

As figuras e tabelas devem ser colocadas no texto o mais próximo possível do ponto são mencionadas pela primeira vez e devem ser numeradas consecutivamente em algarismos arábicos. As figuras devem ser referidas por "fig. 1 "no meio de uma frase ou como" Figura 1 "no início de uma frase. Os valores próprios, bem como suas legendas devem ser centralizados na direção amplitude sábio. As legendas das figuras não devem ter mais de 3 linhas. A legenda para os símbolos de dados, bem como as etiquetas para cada curva devem ser incluídos na figura. As letras devem ser grandes o suficiente para facilitar a leitura. Todas as unidades devem ser expressas no sistema SI (métrico). Uma linha em branco deve ser deixado antes e depois de cada figura.

    Figura 1. Diagrama do módulo de cisalhamento versus freqüência em 303 K

Figuras coloridas e fotografias de alta qualidade podem ser incluídas no documento. Para reduzir o tamanho do arquivo e preservar a resolução gráfica, os dados devem ser guardados em formato GIF (figuras com menos de 16 cores) ou JPEG (para maior densidade de cor) arquivos antes de serem inseridas no manuscrito. As tabelas devem ser referidas por "Tab. 1 "no meio de uma frase ou como" Tabela 1 "no início de uma frase. As mesas, bem como seus títulos devem ser centralizados na direção amplitude sábio. Os títulos dos quadros não deverão ser superiores a 3 linhas. O estilo eo tamanho da fonte utilizada nas tabelas devem ser semelhantes (tanto em tamanho e estilo) para os utilizados no corpo do texto. As unidades devem ser expressas no sistema SI (métrico). Explicações, se houver, deve ser dada ao pé das mesas, não nas tabelas próprias. Uma linha em branco deve ser deixado antes e depois de cada tabela. O estilo das bordas da tabela é livre. Um exemplo é dado no guia. 1.

A Tabela 1. Resultados experimentais para as propriedades mecânicas de CFRC-4HS e compósitos CFRC-sarja. Span / Razão de profundidade = 35:1. Os resultados médios dos sete espécimes.   Propriedades Composite CFRC-TWILL CFRC-4HS 15 Resistência à Flexão (MPa) (1) 209 10 180 1,3 2,8 Módulo de flexão (GPa) (1) 57,0 18,0 0,25 1,90 6,40 Mid-span deformação na tensão de ruptura (mm) 2,15                            (1): medido a 25 ° C

3. AGRADECIMENTOS

Esta secção opcional deve ser colocada antes da lista de referências.

Page 6: TemplateCOBEM2011

Proceedings of COBEM 2011 21st Brazilian Congress of Mechanical EngineeringCopyright © 2011 by ABCM October 24-28, 2011, Natal, RN, Brazil

4. REFERÊNCIAS

A lista de referências deve ser introduzido como um novo ponto, localizado no final do papel. A primeira linha de cada referência devem ser alinhadas à esquerda. Todas as outras linhas deve ser recuado de 0,5 cm da margem esquerda. Todas as referências incluídas na lista de referência deve ter sido mencionado no texto. As referências devem ser listadas em ordem alfabética, de acordo com o último nome do primeiro autor. Veja os exemplos a seguir:

ABCM, 2004. "Revista da Sociedade Brasileira de Engenharia e Ciências Mecânicas". 1 de fevereiro de 2007, <http://www.abcm.org.br/journal/index.shtml.> Bordalo, s.n., Ferziger, J.H. e Kline, SJ, 1989, "o desenvolvimento de modelos Zonal de turbulência", Anais do 10 º Congresso Brasileiro de Engenharia Mecânica, Vol.1, Rio de Janeiro, Brasil, pp 41-44. Coimbra, AL, 1978, "Lições da mecânica do contínuo", ed. Edgard Blücher, S. Paulo, Brasil, 428 p. Clark, JA, 1986, comunicação pessoal, Universidade de Michigan, Ann Harbor. MLA, 2004. "Como posso documento fontes da web em meus trabalhos citada lista?" Modern Language Association. 22 Feb.2007 <http://www.mla.org>. Soviero, P.A.O. e Lavagna, L.G.M., 1997. "Um modelo numérico para aerofólios finos em movimento instável". RBCM - Revista da Sociedade Brasileira de Ciências Mecânicas, vol. 19, No. 3, pp 332-340. Sparrow, ME, 1980, "Transferência de Calor por convecção forçada em um duto Tendo Spanwise periódicas Protuberâncias retangular", transferência de calor Numérica, Vol.3, pp 149-167.

5. AVISO DE RESPONSABILIDADE

O seguinte texto, devidamente adaptado ao número de autores, devem ser incluídos na última seção do documento: O autor (es) está (ão) o único responsável pelo material impresso incluído neste trabalho.