television - sears parts direct · program and the direct video output from an accessory (vcr,...
TRANSCRIPT
![Page 1: TELEVISION - Sears Parts Direct · program and the direct video output from an accessory (VCR, camera, etc.) onto the TV screen at the same time. Standard TV broadcast (VHFAIHF) or](https://reader034.vdocuments.us/reader034/viewer/2022050401/5f7eb9d2cca1b15c6c2b5cdb/html5/thumbnails/1.jpg)
OWNERSMANUAL
MODEL NO.
626.54618390
SERIES
KNOW YOUR UNIT
Read this booklet so you will be
able to enjoy all the features in
your Projection Television.
Record in the space providedbelow the Model No. and the
Serial No. as found on the label
located on the back of your
Projection Tetevision.
Model No.
Serial No.
Purchase Date
Retain this information for future
reference, along with your sales receipt.
_LXi_
MTS STEREO SOUND
REMOTE CONTROL
PROJECTIONTELEVISION
5ears, Hoebuck and Co., Hoflmall Fstates, IL 6019b
![Page 2: TELEVISION - Sears Parts Direct · program and the direct video output from an accessory (VCR, camera, etc.) onto the TV screen at the same time. Standard TV broadcast (VHFAIHF) or](https://reader034.vdocuments.us/reader034/viewer/2022050401/5f7eb9d2cca1b15c6c2b5cdb/html5/thumbnails/2.jpg)
To c,,_u_c that plctmc ,_clccn pcrlormancc is of the highest quality, avoid rubbing any object t)l material on tile sclccn that could scJatcl_or damage its surface.When cleaning the TV screen take care not to scratch or damage the screen surface (avoid wearing jewelry or using anything abrasive).Please see the directions in the Cleaning and Care section of this manual for further details.
CAUTION: A video source (such as a video game, Compact Disc Interactive - CDI, or TV information channel) which shows a constantnon-moving pattern on the TV screen, can cause picture tube damage. When your TV is continuously used with such a source the patternof the non-moving portion of the game (CDI, etc.) could leave an image permanently on the picture tube. When not in use, turn the videosource OFF. Regularly alternate the use of such video sources with normal TV viewing.
If an outside antenna is connected to the television
receiver, be sure the antenna system is grounded so as
to provide some protection against voltage surges and
built up static charges. Section 810 of the National
Electrical Code, NFPA No. 70-1975, provides
information with respect to proper grounding of the
mast and supporting structure, grounding of the lead-
in wire to an antenna discharge unit, size of grounding
conductors, location of antenna-discharge unit,
connection to grounding electrodes, and requirements
for the grounding electrode.
NOTE: It is essential that any TV signal lines that areto enter the home be grounded at the exact same pointas the power service grounding. This appliesregardless of any other grounding to those systems.
NOTE to CATV System Installer:This reminder is provided to call the CATV systeminstaller's attention to Article 820-40 of the NEC that
provides guidelines for proper grounding and, inparticular, specifies that the cable ground shall beconnected to the grounding system of the building asclose to the point of cable entry as practical.
GROUNDCLAMP
ELECTRICSERVICE
EQUIPMENT
ANTENNA LEADIN WIRE
ANTENNA
DISCHARGE UNIT
(NEC SECTION 810-20)
GROUNDING CONDUCTORS(NEC SECTION 810-21)
GROUND CLAMPS]
_4 POWER SERVICE GROUNDINGELECTRODE SYSTEM(NEC ART 250, PART H)
NEC-NATIONAL ELECTRICAL CODE
WARNING: TO PREVENT FIRE OR SHOCK
HAZARD DO NOT EXPOSE THIS UNIT TO
RAIN OR EXCESSIVE MOISTURE.
The lightning flash with arrowhead symbol, within an equilatcraltriangle is intended to alert the user of the presence ofuninsulated "dangerous voltage" within the product's enclosure,that may be of sufficient magnitude to constitute a risk ofelectric shock to persons.
The exclamation point within an equilateral triangle is intended
to alert the user of the presence of important operating andmaintenance (servicing) instructions in the literatureaccompanying the appliance.
![Page 3: TELEVISION - Sears Parts Direct · program and the direct video output from an accessory (VCR, camera, etc.) onto the TV screen at the same time. Standard TV broadcast (VHFAIHF) or](https://reader034.vdocuments.us/reader034/viewer/2022050401/5f7eb9d2cca1b15c6c2b5cdb/html5/thumbnails/3.jpg)
• , Getting Started_; Warning/Precautions ................................ 2-3
Antenna and Cable TV Connections ........ 4-5
VCR to TV Antenna Connections ............................. 5
First Time Set-Up and Use of the TV ................. 6-7
Basic TV and Remote Control Operation .............. 8-9
[---_ On-Screen Featlires
How to Use the On-Screen Feature Controls ..... 10-11
How to Select Picture and Sound Controls ...... 12
+ Selecting a Picture Source ................................ 12
+Adjusting Brightness, Picture, Color,
Tint, and Sharpness Controls ............................ 13
+Using the Clearview Control ............................. 14
+Using the Flesh Correction Control .................. 14
+Adjusting Bass, Treble, and Balance Sound
Controls ............................................................. 15
+Using the Expander Sound Control .................. 16
+Setting the TV for Stereo Programs ................. 17
How to Select Advanced Controls ..................... 18
+Setting the TV Clock ......................................... 18
+Setting the Sleep Timer ..................................... 19
+Setting the TV for Closed Captioning ............... 20
+Using the Time/Channel Reminder Controls....21
+Adjusting the Size of Channel/Time Display ...22
+Setting the TV for Cable or Antenna Signals....23
+Adding Channels in Memory (Automatically) 24
+Adding Channels in Memory (Manually) ......... 25
+Adjusting the TV's Convergence Control ......... 26
+Using the TV Speaker On/Off Switch with
the Audio Output Jacks .................................... 27
+Using the TV's Audio/Video Input Jacks ......... 28
+Surround Sound Speaker Connections ............. 29
Remote Control Operation
Using the Remote (TV/VCR buttons)...30-31
Setting the Remote to Work Your VCR ............. 32-33
Setting the Remote to Work Your
Cable Converter .................................................. 34-35
Setting the Remote to Work a VCR or CableConverter- "Search Method". ............................ 36-37
_.._ Picture-ln-Picture (PIP)How to Use PIP (Connections) .............. _8-39
How to Use PIP with the TV Remote ................ 40-41
Adjusting Picture-In-Picture Color and Tint ........... 42
More PIP Connections (Cable Converter) ............... 43
General Inf0rmctti0n
Tips if Something Isn't Working ............... 44
Accessory Shelf Installation .................................... 45
Glossary of TV Terms ............................................. 46
Index ........................................................................ 47
Warranty .................................................................. 48
First Time bet Up which automatically .scls ti_c TV
for local channels and correct antenna mode (see page6).
Infrared Remote Control which operates your TVand a variety of wireless remote control VCRs andCable Converters.
Picture-In-Picture (PIP) which can show a TVprogram and the direct video output from anaccessory (VCR, camera, etc.) onto the TV screen atthe same time.
Standard TV broadcast (VHFAIHF) or Cable TV
(CATV) channel capability.
Closed Captioning which allows the viewer to read
TV program dialogue or voice conversations as on-screen text.
Automatic Programming of channels for quick andeasy selection of favorite stations available in yourarea.
Stereo-Ready TV with built-in audio amplifier and
twin speaker system. Receives TV programs in both
broadcast stereo sound or (SAP) bilingual broadcast.
On-Screen Features which display helpfulinformation for setting of TV controls (such as color
adjustment, timer settings and channel programming).
Audio/Video jacks for direct connections with VCRs(and other accessories) for quality TV picture andsound playback.
Sleep-Timer which automatically turns the TV OFFat preset time intervals.
![Page 4: TELEVISION - Sears Parts Direct · program and the direct video output from an accessory (VCR, camera, etc.) onto the TV screen at the same time. Standard TV broadcast (VHFAIHF) or](https://reader034.vdocuments.us/reader034/viewer/2022050401/5f7eb9d2cca1b15c6c2b5cdb/html5/thumbnails/4.jpg)
HSI 1('1 'S _Oltn_'('l )'oil/ A/tlcIHItl
or Cable TV signal to your TV.
Tiffs will be easy since there is
onl)/ one antenna plug (75_) oll
the back of your TV- and that's
where the antenna goes.
[BEGIN]
<_If your antenna (or CABLE
TV signal) has a round cable
(75 ohm) with a metal prong (F-
connector) on the end, then you're
ready to connect it to the TV.
if your antenna has flat twin-
lead wire (300ohm), you firstneed to attach the antenna wires to
the screws on an optional (300 to
75 ohm) adapter.
<_ Push the round end of the
cable (or adapter) onto the
ANTENNA plug on the back ofthe TV. If the round end of the
cable connector is threaded, screw
it down tight.
ll_ _Try out. toit Press POWER
turn the TV ON. Press the
CHANNEL UP button. Youshould see local channels flash by.
Remember. Use theIRST TIME SETUP section
(page 6) to have the TV
automatically set itself for local
channels and type of antenna
signal.
To order any optional accessory('onltlcl your n_'(trexl Sears Repair
De pa rl nl en t:
U H F/V H F Combi ne r. ................. 705109 - I
75-300 Ohm Adapter .................. 704427-6
i1Back ol 'IV
ooooooooooooooooooooooouoouooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooo
oooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooouuoooooooooooooooooooooooouooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooo
Ouldoul VIII'/LJlII" Anlcnl}a
Twin I.ead (
Wire
3(X) to 75_)
Adapter
(not supplied)
\
\
oooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooo
ooooooouooooooooooooooooooooooooooooooo
ooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooo
\
\\\
\\
\\
\
\\\
\\
\\
\\\
\\
\\
k\
\
""Round Cable
75_1
Outdoor VHFIUHF Antenna
('able TV Signal
![Page 5: TELEVISION - Sears Parts Direct · program and the direct video output from an accessory (VCR, camera, etc.) onto the TV screen at the same time. Standard TV broadcast (VHFAIHF) or](https://reader034.vdocuments.us/reader034/viewer/2022050401/5f7eb9d2cca1b15c6c2b5cdb/html5/thumbnails/5.jpg)
_0111( O/ .\'OH IH_I.\ ]I_IVC ltt'oSE'p,C,IF(IIE' EIIIlE'IIlI_IS. For
instance, one anlem_a isfor Vt/k
chwmels (2-13). and the other
amemm is.fi, r UHF chan.e/s (/4-
For homes with two separate
anlennas, you will need an optional
"combiner" before you can conned
to the TV. See ordering details on
the previous page.
_1,_ Attach the separate antennas
to the correct screws on the
combiner.
_Push lhe round end of the
combiner onto the ANTENNA
plug on the rear of the TV.
Twin Lead
Wire
I$11_ k ol J \
oo oooo(,oooooooooooo oooo oooooooo(_ooooo,,_,ooooooooooooooooo oo oo oooooo0oooooooooo ooooooooooooooooooooooooooouooooooooooooooooooooooooooooooooooouooooooooooovooooooouoooooooooooooooooooooo
oooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooo
ooooooooooooooooooooooooooo_o0oooooooooo0oooooooooooooooooooooooooo0oooo_oooooouoooooooooooo
oooooooooooooouoooooouooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooo
ooooooooooooooooooooooooo0ooooooooooooooooooooooooooooooooooooooooooooooooooooooouoooooooo
ooooooooooooooooooooooooooooooooooooooo
oooooooooooooooooooooooo0ooooooooooooooo
ooooooooooooooooooooo [oooooooooooooooooooo
Twin Lead
Wire
Adapler Round (?able
Connect your Antenna or
Cable TV signal to the IN FROM
ANT plug on the back of the VCR.
,_ Connect the OUT TO TV
plug on the VCR to the Antenna
plug on the TV. (Connecting cable
supplied with the VCR).
\\
Round Cable
75(2 Supplied with VCR
Ouldoor VHI:/UIJF
A ntcnn:.l
3(X)to75_2
Adapter
"_. attic I'V Signal
![Page 6: TELEVISION - Sears Parts Direct · program and the direct video output from an accessory (VCR, camera, etc.) onto the TV screen at the same time. Standard TV broadcast (VHFAIHF) or](https://reader034.vdocuments.us/reader034/viewer/2022050401/5f7eb9d2cca1b15c6c2b5cdb/html5/thumbnails/6.jpg)
irst Time Set Up makes theinitial use of your TV easy and
automatic. Just follow the steps
below and let your TV set itself for
local channels and the type of
antenna signal you have. The TV's
on-screen clock may also be set
when using First Time Set Up.
_ Press button on thethe MENUTV or the remote control.
A TELEVISION ADJUSTMENTS
screen appears on the TV. (Formore details on "How to Use On-
Screen Features" see page 10).
<_ Press the MENU • button to
I move the on-screen arrow toFIRST TIME SETUP.
_s Press the MENU button toelect FIRST TIME SETUP.
<_ Press MENU button again to
continue with FIRST TIMESETUP.
<_ Check your (orthat Antenna
I Cable TV) signal is connected to
the rear of the TV. (See page 4 if
you need any help).
<_ Press MENU button tocontinue.
The TV will begin to automaticallyset itself:
• First for the type of signal youconnected - either Antenna orCable.
• Then for the TV channels
available in your area.
continue to the next page ....
Remember. You may presse STATUS button (on the TV
or remote) to stop the FIRST TIMESETUP at any time.
TELEVISION ADJUSTMEN1S
USE,,_)lTOSELECTITEM.
-- PICTURE/SOUNDCONTROLS
m ADVANCEDCONTROLS............._:_::_i!i::!iiiiiiii!!i.....:.::::_:iiiiii_iiiiiii_!i!i!i
I_, FIRSTTIMESETUP..................._:_::iiiiiii_i_i-- EXIT
iiiiiiiii!iiiiii:iiiiiiiii!iiii[iiL:::::::::::::::::::::
THEFIRST-TIMESETUPPROVIDESA SIMPLEMETHOD
OFADJUSTINGTHEMOSTIMPORTANTCONTROLSFORTHISTELEVISIONRECEIVER.
PRESS _) TO CONTINUE
MANY OF THECURRENTTVCONTROLSETTINGSWILL BE
MODIFIEDBY CONTINUINGWITH FIRST-TIME SETUP.
PRESS_TO QUITOR
PRESS I_ TO CONTINUE
!PLEASECHECKTHATYOUR
ANTENNAORCABLEISCONNECTEDTOTHEPLUGMARKEDANT/CABLEON
THETVREARINPUTPANEL.
PRESS_TO QUITOR
PRESS 0 TO CONTINUE
!* PLEASEWAIT *
SYSTEMISTESTINGFORCORRECTTUNINGMODE.
![Page 7: TELEVISION - Sears Parts Direct · program and the direct video output from an accessory (VCR, camera, etc.) onto the TV screen at the same time. Standard TV broadcast (VHFAIHF) or](https://reader034.vdocuments.us/reader034/viewer/2022050401/5f7eb9d2cca1b15c6c2b5cdb/html5/thumbnails/7.jpg)
Tile Testing ,rod _;cat_.'hing 101
channels by the TV will last only afew minutes. The TV will even tell
you when it is finished and how
many channels it has saved.
"SAVED IN MEMORY" channels
are the ones you select when youpress the CHANNEL&Y buttons.
<_a Press the MENU button to
I continue if you want to set the TVclock.
<_ Press the MENU &V buttonsto set the time on the TV clock.
Press the MENU (+) or (-) buttonsto move between the hours and
minutes parts of the clock.
_ Press the MENU button tocomplete the FIRST TIME SETUP.Then press MENU one more timeto EXIT or return to normal TV
viewing.
iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii i .......
THESEARCHFORACTIVECHANNELSIS COMPLETE.
17 CHANNELSWEREFOUNDANDSAVEDINMEMORY.
PRESS O TO CONTINUE
I
VPLEASECHECKTVCLOCKAND
ADJUSTIFNECESSARY.
THE TIME IS CURRENTLYSETTO12:00
T
USE_ TOADJUSTTIME
THENPRESSO TOCONTINUE
THISCOMPLETESTHEFIRST-TIMESETUP.
PRESS_ TOEXITSETUP
![Page 8: TELEVISION - Sears Parts Direct · program and the direct video output from an accessory (VCR, camera, etc.) onto the TV screen at the same time. Standard TV broadcast (VHFAIHF) or](https://reader034.vdocuments.us/reader034/viewer/2022050401/5f7eb9d2cca1b15c6c2b5cdb/html5/thumbnails/8.jpg)
_ Press the POWER button loturn tile TV ON. (Note: you canpress any button on the front of theTV to turn the TV ON).
The tuned channel number will
appear briefly when the TV is firstturned ON. You can also press theSTATUS button to see whatchannel the TV is ON.
<_ Press the UP (A) orVOLUME
I OWN (Y) button to adjust thesound level.
<_ Press UP (&)the CHANNEL
or DOWN (V) button to select
TV channels.
See FIRST TIME SETUP (page
6) on how the TV can set itself to
select your local channels.
<_ Point the remote control at theremote sensor window on the TV
when operating the TV with theremote.
<_ Always press two numberbuttons on the remote when
selecting channels. For example:press "0" then "6" for channel "6".
Remember. Certainchannel numbers have been
added to the TV's memory at thefactory. FIRST TIME SET UP ......_::iii::_(page 6) will automatically set theTV for your local channels and the J
type of antenna signal you have. __ oN sapSTR]_ __
Remote _" The VCR button is used for
Sensor Audio/Video accessory
Window connections made at the rear of
the TV. See page 28 for details.
8
![Page 9: TELEVISION - Sears Parts Direct · program and the direct video output from an accessory (VCR, camera, etc.) onto the TV screen at the same time. Standard TV broadcast (VHFAIHF) or](https://reader034.vdocuments.us/reader034/viewer/2022050401/5f7eb9d2cca1b15c6c2b5cdb/html5/thumbnails/9.jpg)
mini rcmvte mc'ludcd wdhyour TV may also be used to
work the following basic TVfunctions:
Power - Press to turn the TVON and OFF.
Mute - Press to turn the sound
OFF at the TV. Press again toreturn sound to the TV.
Channel buttons - Press to scan
up (or down) through channelnumbers set in the TV's memory.
Volume buttons - Press to turn
the TV sound up (or down).
To load batteries (supplied)into the mini remote:
1. Remove batterycompartment back.
2. Place batteries in the
remote. Line up the (+)and (-) ends of thebattery correctly.
3. Reattach the battery lid.
To load battery (supplied) into the full sizeremote:
1. Remove battery compartment lid onthe back of the remote.
2. Connect the battery to the terminalson the remote (it only fits one wa,
3. Reattaeh the battery lid.
9
![Page 10: TELEVISION - Sears Parts Direct · program and the direct video output from an accessory (VCR, camera, etc.) onto the TV screen at the same time. Standard TV broadcast (VHFAIHF) or](https://reader034.vdocuments.us/reader034/viewer/2022050401/5f7eb9d2cca1b15c6c2b5cdb/html5/thumbnails/10.jpg)
eature'.riOt your TV can beadjusted from a MENU screen
shown on the TV. A MENU is
nothing more than an on-screenlist of features. Each MENU itemcan be adjusted by viewing thescreen and pressing a button.
_ Press the MENU button on the
I emote or TV. A list of TVADJUSTMENT controls appearson the TV screen.
<_ Press the MENU AV buttons
(on the remote) to move the REDARROW to the desired TV
Adjustments section.
(See next page for list of controls).
The ADVANCE (ADV) &Vbuttons on the TV can also be used
to move the RED ARROW to thedesired control.
<_ Press the MENU button toselect the Adjustment controlsection highlighted with the REDARROW.
A list of individual Adjustmentcontrols appears on the TV screen.
,;_ Press the MENU &V (orADV)buttons to move the RED ARROW
up or down the list of controls.Then press MENU to select thedesired control.
<_ Press (+) or (-) buttons to adjust
the selected on-screen control.
<_ Press the STATUS button toclear the screen after an adjustment
Use the EXIT control within theMENU to return to normal TV
viewing.
A_ Remember. If an on-screenntrol disappears from the TVscreen and you are not finished
working with it, just repress theMENU button until the last
selected control reappears on thescreen.
TELEVISIONADJUSTMENTS
USE i_)i TO SELECTITEM.
I_ PICTURE/SOUND CONTROLS
ADVANCEDCONTROLS
FIRST TIME SETUP
EXIT
ON THE '_ JONTHE
TELEVISION 'V REMOTE
10
![Page 11: TELEVISION - Sears Parts Direct · program and the direct video output from an accessory (VCR, camera, etc.) onto the TV screen at the same time. Standard TV broadcast (VHFAIHF) or](https://reader034.vdocuments.us/reader034/viewer/2022050401/5f7eb9d2cca1b15c6c2b5cdb/html5/thumbnails/11.jpg)
TELEVISIONADJUSTMENTS
USE e_e TOSELECTITEM.
I_ PICTURE/SOUNDCONTROLS
-- ADVANCEDCONTROLS
-- FIRSTTIMESETUP
-- EXIT
• Press MENU to view AdjustmentControls.
• Press MENU AY to move Rcd Arrow to
desired controls list.• Press MENU to select highlighted
controls list.
PICTURE/SOUNDCONTROLS
EXIT-- PICTURESOURCESELECT
-- BRIGHTNESS-- PICTURE
Bl_ COLORTINT
-- SHARPNESS
USE _ THENO TOSELECT.
• Press MENU A.y to move up and
__ list of control items.• Press MENU to select highlighted
control.
!ii
COLOR#I__IIIIIIIII[]Z_)
• Press (+) OR (-) buttons to adjust theselected control.
11
![Page 12: TELEVISION - Sears Parts Direct · program and the direct video output from an accessory (VCR, camera, etc.) onto the TV screen at the same time. Standard TV broadcast (VHFAIHF) or](https://reader034.vdocuments.us/reader034/viewer/2022050401/5f7eb9d2cca1b15c6c2b5cdb/html5/thumbnails/12.jpg)
_ l'res,,, MENU button tt_ _cc 1 V
ADJUSTMENTS screen.
<_ PressMENU • or • button to
move RED ARROW toPICTURE/SOUND controls.
<_ Press MENU button to selectthe list of PICTURE/SOUNDcontrols.
&7 _ _:1_ Remember, the controlwith the RED ARROW is
i ready to be used. Just press theMENU button to select it.
TELEVISION ADJUS'[MENTS
USE ,_oTO SELECT ITEM.
I_ PICTURE/SOUND CONTROLS
-- ADVANCED CONTROLS
-- FIRST TIME SETUP
-- EXITPICTURE/SOUNDCONTROLS
-- EXIT
I_ PICTURESOURCESELECT-- BRIGHTNESS
-- PICTURE
-- COLOR
-- TINT
-- SHARPNESS
USE _ THEN_] TOSELECT.
e p_t'tu; c JO/ the ] V can (ontohrough either the ANTENNA
plug or the AUDIO/VIDEO INput
jacks (on the rear of the TV). The
Picture Source control simply tells
the TV which one of these picturesources it is to show on the TV
screen.
<_ Select PICTURE SOURCESELECT control.
With the PICTURE/SOUND
CONTROLS on screen, move thered arrow with the MENU ••
buttons. Then press MENU button.
_ Press the MENU A• buttons
to place the TV in either:
ANT/CABLE- for a picture signal
coming from the ANTENNA
plug on the TV.
VCR/AUX1- for a picture signalcoming from the AUDIO and
VIDEO IN jacks on the TV.
See page 28 for details on how to
connect the A/V INput jacks foruse.
<_ Press the STATUS button to
clear the screen.
PICTURE / SOUND CONTROLS
i_ EXITPICTURE SOURCESELECT ::ii:iii:iii::|il:iiiiii_i
-- BRIGHTNESS ii!iilPICTURE
COLOR
TINT
-- SHARPNESS
USE _ THEN O TO SELECT. :_iii
_ Remember. The VCR/AUXIscreen will be blank unless a signal
I source is connected to those
Audio/Video Input jacks on the TV.
(See page 28 for details).
12
![Page 13: TELEVISION - Sears Parts Direct · program and the direct video output from an accessory (VCR, camera, etc.) onto the TV screen at the same time. Standard TV broadcast (VHFAIHF) or](https://reader034.vdocuments.us/reader034/viewer/2022050401/5f7eb9d2cca1b15c6c2b5cdb/html5/thumbnails/13.jpg)
) adjusl 3()t_t 1 _ (()lor (_ltdicture controls, select a 7V
channel and follow the steps shownbelow:
[BEGIN]
Select BRIGHTNESS,
PICTURE, COLOR, TINT, or
SHARPNESS picture control.
With the PICTURE/SOUND
CONTROLS on screen, move the
red arrow with the MENU AV
buttons. Then press MENU button.
<_ Press the (+) or (-) buttons to
adjust the selected control.
<_ Press the STATUS button to
clear the screen.
!_ _ Remember. When the bar_ scale is centered, control
settings are at normal mid-rangelevels.
Press (-) or (+) until
whitest parts of the picture are as bright
as you prefer.
PICTURE Press (-) or (+) until dark
parts of the picture show good detail.
COLOR Press (-) or (+) to add oreliminate color.
TINT Press (-) or (+) to obtain natural
skin tones. (Also see Flesh Correction
on page 14 for more information).
Press (-) or (+) to
improve detail in the picture.
PICTURE/SOUNDCONTROLS
m EXITm PICTURESOURCESELECT
-- PICTURE t _i iili iiiiiiii:;:i:iiiiiiiiii-- COLOR iiiiiiii::iii-- TINT ...._iii!iiiiiiii!i iiiiiiiiiii
iiiiiii[ii]_ii
m SHARPNESS _::i::i::i::i::i:::.:_::eiiiiiiiii
iliii::::iiiiii
BRIGHTNESS4_]BIIIIIIIIl[_
13
![Page 14: TELEVISION - Sears Parts Direct · program and the direct video output from an accessory (VCR, camera, etc.) onto the TV screen at the same time. Standard TV broadcast (VHFAIHF) or](https://reader034.vdocuments.us/reader034/viewer/2022050401/5f7eb9d2cca1b15c6c2b5cdb/html5/thumbnails/14.jpg)
L2
[eu! vtcw Lv _ ?;Jlalj)/l(,_,_ ,]eu/141 _'which smoothes out
background snow (or picture noise)
without losing picture image detail
or crispness.
[ BEGIN ]
Select CLEARVIEW control.
With the PICTURE/SOUND
CONTROLS on screen, move thered arrow with the MENU AY
buttons. Then press MENU button.
<_ Press the MENU AV buttons
to place the TV in ENHANCEDmode.
<_ Press the STATUS button toclear the screen.I
PICTURE/SOUND CONTROLS
-- SHARPNESS
II@ CLEARVIEW ............................................
-- FLESH
-- PIP COLOR
-- PIPTINT
-- BASS
-- TREBLE
USE ,_ THEN_ TO SELECT.
_:::::
se the t'lesh Cot _c('ttoncontrol to keep skin tone hues
(or facial tint)from varying fromTV channel to TV channel.
[BEGIN]
Select FLESHCORRECTION control.
With the PICTURE/SOUND
CONTROLS on screen, move thered arrow with the MENU &V
buttons. Then press MENU button.
,_ Press the MENU &V buttons
to turn the FLESH CORRECTIONcontrol ON.
<_ Press the STATUS button toclear the screen.
PICTURE/ SOUNDCONTROLS
-- SHARPNESS-- CLEARVIEW
P,pFLESHco'oRCORHECT'OH i+iii+ii-- PIP TINIT ....-- BASS
-- TREBLE
USE _ THEN_ TOSELECT.
!if:.I11
iiiiiiii::
, .....,................++................................................+.................
14
![Page 15: TELEVISION - Sears Parts Direct · program and the direct video output from an accessory (VCR, camera, etc.) onto the TV screen at the same time. Standard TV broadcast (VHFAIHF) or](https://reader034.vdocuments.us/reader034/viewer/2022050401/5f7eb9d2cca1b15c6c2b5cdb/html5/thumbnails/15.jpg)
_'Md_',s lJl¢¢ ttot//t_i VOlUHI_' levelcontrols, your TV also has
individual sound adjustmentcontrols. The BASS (low
frequency), TREBLE(high
frequency), and Speaker
BALANCE may all be used to
adjust the sound playback of TV
programs.
<_ Select BASS, or TREBLE, orBALANCE sound control.
With the PICTURE/SOUND
CONTROLS on screen, move thered arrow with the MENU AV
buttons. Then press MENU button.
<_ Press the (+) or (-) buttons toadjust the sound control to levelsyou prefer.
_:_ Press the STATUS button toclear the screen.
_c Remember. When the barale is centered, speaker
BALANCE is centered between
the TV's right and left sidespeakers.
PICTURE/SOUNDCONTROLS
m FLESHCORRECTION-- PIPCOLORm PIPTINT
I_.BASS-- TREBLE
BALANCEEXPANDER
USE _ THENO TOSELECT.
_QQQ
15
_]]_]IIIIIIIII1[I_,9
![Page 16: TELEVISION - Sears Parts Direct · program and the direct video output from an accessory (VCR, camera, etc.) onto the TV screen at the same time. Standard TV broadcast (VHFAIHF) or](https://reader034.vdocuments.us/reader034/viewer/2022050401/5f7eb9d2cca1b15c6c2b5cdb/html5/thumbnails/16.jpg)
AtI'ANDI:D soumt <an bc u.scdo add greater depth anddimension to both monaural
(MONO) and STEREO TV sound.
{ BEGIN ]
Select EXPANDER soundcontrol.
With the PICTURE/SOUND
CONTROLS on screen, press theMENU AV buttons to move the
red arrow. Then press MENUbutton.
_ Press the MENU &Y buttons
to place the TV in theEXPANDED sound mode.
<_ Press the STATUS button toclear the screen.
_ Remember. Under somestereo broadcast conditions the
EXPANDED mode should not beselected for use.
For Example: With the EXPAND
mode ON, the stereo external
speaker connections necessary for
Surround Sound playback will not
work properly (unless the STEREOcontrol is set to "MONO AT ALL
TIMES"- see pages 17 and 29 for
more information.)
PICTURE/SOUNDCONTROLS
-- BASS
m TREBLEm BALANCE
I_'EXPANDERSTEREO/MONOSAP2NDAUDIOPROGEXIT
USE _ THEN9 TOSELECT.
16
![Page 17: TELEVISION - Sears Parts Direct · program and the direct video output from an accessory (VCR, camera, etc.) onto the TV screen at the same time. Standard TV broadcast (VHFAIHF) or](https://reader034.vdocuments.us/reader034/viewer/2022050401/5f7eb9d2cca1b15c6c2b5cdb/html5/thumbnails/17.jpg)
roadcast stereo TV prog; am.s.The TV is equipped with anamplifier and twin speaker systemthrough which the stereo soundcan be heard.
A RED stereo light (on the front ofthe TV) will come on when a
stereo broadcast is received.
[BEGIN]
<_ Select STEREO sound control.
With the PICTURE/SOUND
CONTROLS on screen, press theMENU &V buttons to move the
red arrow. Then press MENUbutton.
_ Press the MENU &V buttons
I o place the TV in the STEREOsound mode.
_ Press the STATUS button toclear the screen.
,m_ Remember. lfa stereosignal is not available and the
TV is placed in the STEREOmode, sound coming from the TVwill remain monaural (mono).
SECOND (2ND) AUDIOPROGRAM (SAP) is part of thestereo broadcast system. SAP isanother audio channel that isbroadcast with the stereo sound.
Many experts believe it will beused to broadcast foreign languagetranslations of TV programs.
A YELLOW SAP light (on thefront of the TV) will come onwhen SAP is available with the
selected channel.
J7 _ Remember. If a SAPsignal is not available, with
the currently selected channel, theSAP option can not be selected."SAP NOT AVAILABLE" willappear on the TV screen.
PICTURE/ SOUND CONTROLS
-- BASS-- TREBLE
BALANCE
-- EXPANDER.... ::::::::::
I_STEREO/MONO .iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii_iiiiiiiiiii-- SAP2NDAUDIOPROI_M!ITi!!i!!!ii- Ex,T ......ii!!i!!ii!i
!:!:!!!!::!!!:.
iiiiiiiiiii))iiiii:iiiiiiiiii:"
PICTURE/SOUND CONTROLS
-- BASS
TREBLE
-- BALANCE
-- EXPANDER
-- STEREO/MONO
I_ SAP 2ND AUDIO PROGRAM
-- EXIT
USE _, THEN _ TO SELECT.
THIS CONTROL SCREIsN WILL ONL"
APPEAR IF SAP IS AVAILABLE ONTHE CURRENT CHANNEL
17
![Page 18: TELEVISION - Sears Parts Direct · program and the direct video output from an accessory (VCR, camera, etc.) onto the TV screen at the same time. Standard TV broadcast (VHFAIHF) or](https://reader034.vdocuments.us/reader034/viewer/2022050401/5f7eb9d2cca1b15c6c2b5cdb/html5/thumbnails/18.jpg)
(BEGIN)
<_ l'rc_s MENU button to scc TV
I ADJUSTMENTS screen.
_ PressMENU • or button tomove RED ARROW toADVANCED controls.
<_ Press MENU button to selectthe list of ADVANCED controls.
Remember, the controlwith the RED ARROW is
ready to be used. Just press theMENU button to select it.
TELEVISION ADJUSTMENTS
USE _,_oTO SELECTITEM.
-- PICTURE/SOUND CONTROLS
ADVANCED CONTROLS
-- FIRST TIME SETUP
-- EXITADVANCEDCONTROLS
-- EXIT
l_ CLOSEDCAPTIONING
-- CAPTIONINGDURINGMUTE
-- SETTIME
-- TIMEREMINDER
CHANNELREMINDER
CHAN/TIMEDISPLAYSIZE
USE ,_ THEN(_ TOSELECT.
screen clock. During normatoperation the clock appears on thescreen with every channel change(and when the STATUS button ispressed).
f-a-g-a-ra3
<_ Select SET TIME control.
With the ADVANCED
CONTROLS on screen, press theMENU A• buttons to move the
red arrow. Then press MENUbutton.
<_ Press the MENU •• buttons
to set the minutes portion of theclock.
<_ Press the M (+) or (-) buttons
to move the selection arrow to thehours portion of the clock.
<_ Press the M A• buttons to set
I the hours portion of the clock.
_ Press the STATUS button to set
I the clock in operation and clear the
screen.
CAPTIONING DURING MUTE
II_ SET TIME
__be Remcmbcr. The time may alsoj set using the number buttons on
I the remote. Be sure to press "0" first[and then the hour number for single
digit entries.
18
![Page 19: TELEVISION - Sears Parts Direct · program and the direct video output from an accessory (VCR, camera, etc.) onto the TV screen at the same time. Standard TV broadcast (VHFAIHF) or](https://reader034.vdocuments.us/reader034/viewer/2022050401/5f7eb9d2cca1b15c6c2b5cdb/html5/thumbnails/19.jpg)
Hfr a vc yuu cvct jidlen .sleep inont of the TV and then
have it wake you up at two in themorning with a test patternscreeching in your ears? Well,your TV can save you all thattrouble by automatically turningitself off.
r-a-g ral<_ Press the SLEEP button on the
remote.
"SLEEP TIMER - 0:00" appearson screen.
<_ Press the SLEEP buttonrepeatedly to select the amountof time before the TV will turnOFF.
The TV can be set to turn itself
off anywhere from 15 minutes to4 hours away.
<_ Press the STATUS button to
I clear the screen.
AIT_-_ Remember. If you everwant to see how many minutes
are left before the TV shuts off,
press the SLEEP button.
If you ever want to stop a SLEEP
TIMER setting, reset the timer to
0:00. Turning the TV off and then
back on also cancels a setting.
A few seconds before the TV is to
shut off a message will come onthe screen telling you GOODNIGHT.
19
![Page 20: TELEVISION - Sears Parts Direct · program and the direct video output from an accessory (VCR, camera, etc.) onto the TV screen at the same time. Standard TV broadcast (VHFAIHF) or](https://reader034.vdocuments.us/reader034/viewer/2022050401/5f7eb9d2cca1b15c6c2b5cdb/html5/thumbnails/20.jpg)
losed Catmomng (CC) atlow.syou to read the voice content of
television programs on the TVscreen. Designed to help the hearingimpaired this feature uses on-screen"text boxes" to show dialogue andconversations while the TV programis in progress.
<_ Select CLOSEDCAPTIONING control.
With the ADVANCED
CONTROLS on screen, press theMENU &V buttons to move the red
arrow. Then press MENU button.
<_ Press the MENU AV buttons
to select the desired Closed Captionmode - For Example: STANDARD.
STANDARD (CC1) :
dialogue (and descriptions)for the action on the captionedTV program shows on-screen.(See important note on thispage.)
SECOND LANGUAGE (CC2) :foreign language translation ofdialogue (and descriptions)for the action on the captionedTV program shows on-screen.
FULL SCREEN TEXT 1 or 2:
often used for channel guide,schedules, or bulletin board
information for CC programs.
<_ After making your Caption mode
selection, press the STATUS buttonto clear the TV screen. The selected
Closed Caption mode will be active.
To cancel, set the Closed Captionedfeature to OFF when finished
viewing.
Remember. Broadcastations will often use spelling
abbreviations, symbols, dropoutsand other grammatical shortcuts inorder to keep pace with the on-
screen action. These type factorsvary upon the source of thecaptioned text material and do notindicate a need for service on thepart of the TV.
NOTE: Not all TV programs and product commercials arc made for broadcastwith Closed Caption (CC) information included. Neither are all Closed Captionmodes (SECOND LANGUAGE, FULL SCREEN TEXT1, etc.) necessarily beingused by a broadcast station during the transmission of a closed caption program.Refer to your area's TV program listings for the stations and times of ClosedCaption shows.
ADVANCEDCONTROLS
m EXIT
I_ CLOSEDCAPTIONING ::::::::::-- CAPTIONING DURING MUTi_!iiii!ii!!iiiiiiii iiii:iiiiii
-- SET TIME
-- TIME REMINDER _::i_-- CHANNELREMINDER
-- CHAN/TIME DISPLAY SIZE
USE " THEN B TO SELECT.
DURING MUTEthe
STANDARD m(_.le
Example Type Display
Closed Caption infl>rmation will usually appearin black and white (although some broadcasters
or nelworks may (x:casiona/ly use coh)r tohighlight or draw attention to certain areas.
Note: Weak signals or interference may cause
p_×)rreception of Closed Caption programming.
FULL 5CRISEN TEXTI & TEX'I 2 modes
TV screen will be blocked from viewing
20
![Page 21: TELEVISION - Sears Parts Direct · program and the direct video output from an accessory (VCR, camera, etc.) onto the TV screen at the same time. Standard TV broadcast (VHFAIHF) or](https://reader034.vdocuments.us/reader034/viewer/2022050401/5f7eb9d2cca1b15c6c2b5cdb/html5/thumbnails/21.jpg)
ESJ
ith the 2 _,J_mmder cont/_isON, the TV automatically
shows you the current time and
channel every thirty minutes.
[ BEGIN ]
Select TIME or CHANNELREMINDER control.
With the ADVANCED
CONTROLS on screen, press theMENU 41,Y buttons to move the
red arrow. Then press MENUbutton.
@_ Press the MENU AS' buttons
i to turn the Reminder controls ON.
)Press the STATUS button toclear the screen.
J7 _ Remember. The TIME-Al_J_.-.-.-.-.-.-d_and CHANNEL Reminders
I appear on the hour and the half-hour for about five seconds.
ADVANCEDCONTROLS
-- EXIT
-- CLOSEDCAPTIONING
-- CAPTIONING DURING:
-- SET TIME
_ TIMEREMINDERCHANNELREMINDER
m CHAN/TIME DISPLAY SIZE
USE _. THEN 0 TO SELECT.
:i!i!iiiii!!ii!ili_:+:.:.:+:+:.:..
_......................._............_........._...........................,_............................
14 12:30
TIME AND CHANNEL REMINDERS DISPLAYED
21
![Page 22: TELEVISION - Sears Parts Direct · program and the direct video output from an accessory (VCR, camera, etc.) onto the TV screen at the same time. Standard TV broadcast (VHFAIHF) or](https://reader034.vdocuments.us/reader034/viewer/2022050401/5f7eb9d2cca1b15c6c2b5cdb/html5/thumbnails/22.jpg)
ith the Cha.n(qi] mz_Display control you can
change the size and location of the
on screen channel and clock
information.
[BEGIN]
Select CHANNEL[rIMEDISPLAY SIZE control.
With the ADVANCED
CONTROLS on screen, press theMENU AV buttons to move the
red arrow. Then press MENUbutton.
_ Press the MENU AV buttons
to turn the LARGE or SMALLDISPLAY control ON.
<_ Press the STATUS button toclear the screen.
ADVANCED CONTROLS
-- CLOSEDCAPTIONING
-- CAPTIONING DURING MUTE
SET TIME
TIME REMINDER
CHANNELREMINDER
il_ CHAN/TIME DISPLAYSIZECABLECHANNELTUNING
USE _. THEN G TO SELECT,
LARGE
Remember. The SMALL SIZE displayshows only the channel number, not the time(or clock).
SMALL
22
![Page 23: TELEVISION - Sears Parts Direct · program and the direct video output from an accessory (VCR, camera, etc.) onto the TV screen at the same time. Standard TV broadcast (VHFAIHF) or](https://reader034.vdocuments.us/reader034/viewer/2022050401/5f7eb9d2cca1b15c6c2b5cdb/html5/thumbnails/23.jpg)
IL
_./yo,+ didn't go lhrough t/u1"FIRST TIME SETUP (page _),
you need to make sure the TV is set
to pick up either Cable TV or
Antenna signals. In other words,
the TV needs to know if you
connected a Cable TV signal or anormal antenna to its ANTENNA
plug.
<_ Select CABLE CHANNELTUNING control.
With the ADVANCED
CONTROLS on screen, press theMENU ilV buttons to move the
red arrow. Then press MENUbutton.
<_ Press the MENU &V buttons
to place the TV in either:
CABLE- If you DO haveCable TV connected
to the TV. Channels
1-125 (excluding 95-
97) available.
ANTENNA- If you have anAntenna connected
to the TV. Channels
2-69 available.
<_ Press the STATUS button to
clear the scree_
iff_ Remember. The FIRST-.,_,i_P TIME SETUP procedure (page
6) does all this for you
automatically.
ADVANCEDCONTROLS
-- CAPTIONING DURING MUTE
-- SET TIME
-- TIME REMINDER
m CHANNELREMINDER
-- CHAN/TIME DISPLAYSIZE
I_ CABLECHANNELTUNING
-- AUTO-PROGRAMMING
USE _. THEN _ TO SELECT.
23
![Page 24: TELEVISION - Sears Parts Direct · program and the direct video output from an accessory (VCR, camera, etc.) onto the TV screen at the same time. Standard TV broadcast (VHFAIHF) or](https://reader034.vdocuments.us/reader034/viewer/2022050401/5f7eb9d2cca1b15c6c2b5cdb/html5/thumbnails/24.jpg)
A lo-l'rogt amnting is jor uddln Xlocal area channel numbers into
the memory of the TV. This makes iteasy for you to select only your area(or Cable T!/) channels when theCHANNEL il buttons are pressed.
If you already went through FIRSTTIME SETUP (page 6), this task hasbeen completed for you.
<_ Select AUTO PROGRAMMINGcontrol.
With the ADVANCED CONTROLS
on screen, press the MENU &Vbuttons to move the red arrow. Then
press MENU button.
_ Press the MENU &V buttons to
turnAUTO PROGRAMMING ON.
The TV shows which channel
numbers are "SAVED" as they areadded into memory."AUTO PROGRAMMING
COMPLETED" appears when the TVis finished adding channels.
<_ Press the STATUS button to clear
I the screen.
Try it out. Press theCHANNEL&V buttons and see
which channels you can select.
Remember. An Antenna orable TV signal must first beconnected to your TV so that channelscan be saved.
If you want to delete any unwanted
channels from the TV's memory, see"ADD/DELETE CHANNELS" on the
next page.
ADVANCEDCONTROLS
-- CHAWTIMEDISPLAYSIZE
-- CABLECHANNELTUNING
I_ AUTO-PROGRAMMINGm ADD/DELETECHANNELS
REDCONVERGENCE
BLUECONVERGENCE
TVSPEAKERSON/OFF
USE _ THEN _ TO SELECT.
CHANNEL NUMBERS .,COUNT UPWARD ASTHE TV LOOKS FORCHANNELS TO SAVE.
,,,,It
,i
'l i I vv ! O r iIH ill llii! Iflff'.hdulld_lI l.l:Jl:il_ •
24
![Page 25: TELEVISION - Sears Parts Direct · program and the direct video output from an accessory (VCR, camera, etc.) onto the TV screen at the same time. Standard TV broadcast (VHFAIHF) or](https://reader034.vdocuments.us/reader034/viewer/2022050401/5f7eb9d2cca1b15c6c2b5cdb/html5/thumbnails/25.jpg)
previous page) adds all the
channels it can find (on your
Antenna or Cable TV system) into
the TV's memory. Add/Delete
Channels makes it easy for you to
add other channels, or drop
unwanted channels,from the list of
channels in the TV's memory.
<_ Select ADD/DELETECHANNELS control.
With the ADVANCED
CONTROLS on screen, press theMENU &V buttons to move the
red arrow. Then press MENUbutton.
_ Press the CHANNEL &V
buttons to select the channel youwant to add or delete.
You can also use the Channel
number buttons on the remote to
select channels.
<_ Press the (+) button to ADD
the channel into the TV's memory.Press (-) button to DELETE the
channel from memory.
Repeat steps 2 and 3 for each
channel you wish to add or delete.
_. _ Press the STATUS button to
clear the screen when through.
_'_ad Remember. You can alsod the VCR/AUX1 just like a
channel. Then by pressing theCHANNEL AV buttons the
VCR/AUX mode can quickly beselected to use the Audio/Video
Input jacks on the rear of the TV
(see page 28).
Note: The VCR/AUXI mode islocated between the lowest and
highest channel numbers withinthe Favorite Channel Memorycontrol screen.
f ...........
ADVANCEDCONTROLS
-- CHAN/TIMEDISPLAYSIZE-- CABLECHANNELTUNING
-- AUTO-PROGRAMMING
I_ ADD/DELETECHANNELSm REDCONVERGENCE
BLUECONVERGENCETV SPEAKERSON/OFF
USE _ THEN_ TOSELECT.
[_"""" I
iii
:::::::::::::::::::..............
iiiiiiiiiiiiiiiiiiiiiiiiiii_....
25
![Page 26: TELEVISION - Sears Parts Direct · program and the direct video output from an accessory (VCR, camera, etc.) onto the TV screen at the same time. Standard TV broadcast (VHFAIHF) or](https://reader034.vdocuments.us/reader034/viewer/2022050401/5f7eb9d2cca1b15c6c2b5cdb/html5/thumbnails/26.jpg)
lining up of the red and blue
light paths on the :_/ screen.
NOTE: If no color fringing (see
sidebar note) shows, then no
Convergence adjustments are
necessary for your TV.
Select RED BLUEor
CONVERGENCE control.
With the ADVANCED
CONTROLS on screen, press theMENU &V buttons to move the
red arrow. Then press MENUbutton.
@Press the MENU &_' and (+)
(-) buttons to move the red or
blue cross directly over the whitecross on the TV screen.
The red or blue cross is properly
adjusted when it is completely
merged with the white cross. (No
color appears around the edge ofthe white cross).
>Press the STATUS button to
clear the screen when convergence
adjustments are complete.
!
Remembcr. Convergence has becn set at thcfactory for best viewing, but if one or more of
the (red or blue) colors appear around the edges ofobjects (color fringing) follow the steps given in thissection.
ADVANCEDCONTROLS
-- CHAN/TIMEDISPLAYSIZE-- CABLECHANNELTUNINGm AUTO-PROGRAMMING
AD_DELETECHANNELS
I_RED CONVERGENCEBLUECONVERGENCE
TVSPEAKERSON/OFF
USE _ THEN@ TOSELECT.
Jiiiiii!iliiiliiiii!ii
26
![Page 27: TELEVISION - Sears Parts Direct · program and the direct video output from an accessory (VCR, camera, etc.) onto the TV screen at the same time. Standard TV broadcast (VHFAIHF) or](https://reader034.vdocuments.us/reader034/viewer/2022050401/5f7eb9d2cca1b15c6c2b5cdb/html5/thumbnails/27.jpg)
o.ld )ou like to heuJ 1Vrograms through your audio
hi-fi system? The TV's Variable
Audio Output jacks and TV
Speaker On/Off control work
together to offer you this TV sound
option.
Connect the R(ight) and L(eft)VARIABLE MODE Audio Out
jacks on the TV to the R and LAudio Input jacks on youramplifier or sound system.
Set the audio system's volume tonormal listening level.
<_ Turn the TV and audio systemON. You can now adjust the soundlevel coming from the audiosystem with the Volume &Vbuttons on the TV or remote.
<_To hear the TV sound from onlythe audio system speakers, selectTV SPEAKERS ON/OFF control.
With the ADVANCED
CONTROLS on screen, press theMENU AY buttons to move the
red arrow. Then press MENUbutton.
<_ Press the MENU AY buttons
to turn the TV Speakers OFF.
You should now only hear TVsound coming from the audiosystem speakers.
<_ Press the STATUS button to
clear the screen.
Remember. The audiosystem may have to be in
AUX(iliary) mode to play soundfrom the TV.
®
BACK OF TV
ADVANCEDCONTROLS
..........,.,...,
AUDIO IN
_QQQ
(_(_(_
27
![Page 28: TELEVISION - Sears Parts Direct · program and the direct video output from an accessory (VCR, camera, etc.) onto the TV screen at the same time. Standard TV broadcast (VHFAIHF) or](https://reader034.vdocuments.us/reader034/viewer/2022050401/5f7eb9d2cca1b15c6c2b5cdb/html5/thumbnails/28.jpg)
tw TV's Audio/Video lttt).t
jacks are for direct picture andsound connections between the TVand a VCR (or Video Disc Player,
etc.) that has Audio/Video Outputjacks.
To view the playback of a VCRtape by using the Audio/VideoInput jacks on the TV:
[ BEGIN J
<_ Connect the VIDEO OUT jack
I from the VCR to the VIDEO INjack on the TV.
<_ Connect the AUDIO OUTjacks R(ight) and L(eft) from theVCR to the AUDIO IN jacks onthe TV.
<_ Select the VCR/AUX1PICTURE SOURCE control, on
the TV. Try any of the threefollowing ways:
An easy way to select VCR/AUXIis to press the VCR button on thefront of the TV.
If you have added VCR/AUXI tothe TV's channel memory (see
page 25), press the CHANNELAY buttons to select it.
With the PICTURE/SOUND
CONTROLS (see page 12), movethe red arrow with the MENU A_'
buttons to PICTURE SOURCE.Then select VCR/AUX1.
<_ Turn the VCR ON and press
PLAY to view the tape on the TV.
_ Remember. If you have a-Al__--.-.-.-.-.-.-d_single (monaural) Audio
Output VCR, "Y" connectors areavailable to complete yourconnection. Contact your nearestSears Repair Department, fordetails.
Also remember when a monoaudio source is connected to the
TV, set the STEREO/MONOsound control to MONO position(see page 17).
( + R L 71
REAR SURROUND SPEAKERS
AHTICABLE
R L
VIDEO IN
/I
ii
VIDEO OUT
(YELI,OW)
AUDIO OUT
RED/WHITE)
AUO_ L--
® ®..............!_................................_:_i_
VCR
28
BACK OF TV !/ :
_OUTDOOR
CABLE TV SIGNAL
PICTURE AND SOUND FROMPLAYBACK OF VCR TAPE
![Page 29: TELEVISION - Sears Parts Direct · program and the direct video output from an accessory (VCR, camera, etc.) onto the TV screen at the same time. Standard TV broadcast (VHFAIHF) or](https://reader034.vdocuments.us/reader034/viewer/2022050401/5f7eb9d2cca1b15c6c2b5cdb/html5/thumbnails/29.jpg)
adding c_t_umd sp_'akc/,_ to
TV's sound system, you can
c'reaw Ihe.l_'eling o.fr<flecwd
sound thai surrounds you at amovie thealer or concert hall.
<_3_ Connect both external
speakers to the speaker wireterminals on the TV.
Recommended optional speakers:8ohm, 10 watt minimum. Be sure
the (+) and (-) speaker wires are
connected to the correct R(ight)
and L(eft) speaker terminals on theTV.
Place the speakers so the viewing
area is between the TV and the rear
surround speakers
Turn TV ON and place theSTEREO/MONO control to
STEREO position.
After setup whenever a stereo
signal is received the audio will beheard in Surround Sound.
Note: The rear Surround Sound
speakers will not be heard at thesame volume level as the front TV
speakers. It is intended for the rear
speakers to give a background
noise effect which requires a lowervolume level than the TV's front
speakers.
A_For an added dimension of
Surround Sound you may also
want to place the TV in the
EXPANDED mode (particularly
with monaural audio programs.)
ote: Surrotmd Sound will nol
ork with mouoaural audio
nalerial, or with only one
peaker CoIIllecled.
i0011OH'IONA[. RFAR SURROUND SOUND SPI'AKERS
(Nee your nearest Sears store lot optional accessories iolorlllalioll)
BACK OF TV
0oi
REAR SPEAKF-R RF, AR SPFAKER
PRIMARY I.ISTF.NING AND VIEWING AREA
29
![Page 30: TELEVISION - Sears Parts Direct · program and the direct video output from an accessory (VCR, camera, etc.) onto the TV screen at the same time. Standard TV broadcast (VHFAIHF) or](https://reader034.vdocuments.us/reader034/viewer/2022050401/5f7eb9d2cca1b15c6c2b5cdb/html5/thumbnails/30.jpg)
After installing the battery intothe remote, slide the TV-VCR-
CBL switch to the TV position.
Point the remote toward the front
of the TV (remote sensor window)
when pressing buttons.
VCR ButtonsFor use of VCR buttons see the "Using
the Remote With a VCR".
Menu (VA) ButtonsPress the M button to show on-screen
feature controls. Press • or • buttons
to move forward and backward
through the list of on-screen controls.
(-) and (+) Buttons
Press to adjust the selected on-screen
feature control.
Yglom¢ BottonPress to adjust the TV sound level.
Number ButtonsPress the number buttons to select TV
channels. Press two number buttons to
select single digit channels. For
example: to select channel 6...press"0" first and then "6".
Reset Bol[tonPress to return the TV to preset factory
settings for picture and sound levels.Also can be used as an Enter button
when sending channel commands to
remote controlled cable converters or
VCRs.
Sleen Button
Set the TV to sutomatically turn itselfOFF. See "Sleep Timer" section fordetails.
The remote's TV-VCR-CBL slideswitch controls how certainbuttons on the remote are used.
For example:
In the "TV" position:the MENU, (M)AV, and (+,-)buttons are used to select and
adjust on-screen TV features.
In the "VCR" position:the same buttons on the remote
work playback, search, pause,and other ¥CR features.
GR
GBL
PLAY
STOP
PAUSE_
ON/OFF POS SWAP FRZ
I
I
_tatus ButtonPress to sec the current chazmcl
number on the TV screen. Also pressthis button to clear the TV screen after
control adjustments.
Alternate Channel Button
Press to select the previously viewedchannel.
For example: You arc watching
channel 4 and change to channel 10
(using the channel number buttons).
Press A/CH and your TV will return to
channel 4. Press A/CH again and yourTV will return to channel 10.
-Channel Scan Button
Press to scan up or down throughchannel numbers.
Press to turn the sound OFF on the
TV. Press again to return the sound to
its previous level.
Press to operate Picture-In-Picturefeatures. See PIP section for details.
TV-VCR-ffBL Power
Bult0n_
Press to turn the TV, accessory cableconverters and VCRs ON and OFF. See
the "How to operate VCRs and Cable
Converters" section for further details.
3O
![Page 31: TELEVISION - Sears Parts Direct · program and the direct video output from an accessory (VCR, camera, etc.) onto the TV screen at the same time. Standard TV broadcast (VHFAIHF) or](https://reader034.vdocuments.us/reader034/viewer/2022050401/5f7eb9d2cca1b15c6c2b5cdb/html5/thumbnails/31.jpg)
hen using the "/'V remotewith a VCR, first make
certain it is set to control your
VCR ( by the REMOTE CODE or
SEARCH method- see following
section).
<_ Slide the TV-VCR-CBL on
I the remote to the VCR position.
_)' Point the top of the remote
I oward the front of the VCR
(remote sensor window) when
pressing buttons.
R_¢ord ButtonHold the RECORD button down, and
then press the PLAY button to begin
a VCR recording.
Rewind ButtonPress to rewind tapes. For some
VCRs you may need to press STOP
button first then REWIND. In
playback mode, hold button down to
view picture moving rapidly in
reverse.
Pause Button
Press to temporarily stop the tape dur-
ing a playback or recording. Pressagain to release Pause.
TV-VCR Button
Press to the VCR position ("VCR"
indicator on the VCR will light) to
view the playback of a tape. Press
again to place in the TV position
("VCR" indicator on the VCR will go
OFF) to view one program while
recording another program.
(_) (_ SWAP ERZ
P/VUE STRB SIZE
,,,®® ® ®,,, ®®®
(5 D[_POWER, J
L
L
J
Play ButtonPress to playback a tape. Hold down
after pressing the RECORD button to
start a recording.
Stop ButtonPress to stop the tape.
-Fast Forward ButtonPress to rapidly advance the tape. For
some VCRs you may need to press
STOP first then FF. In Playbackmode hold button down to view the
picture moving rapidly in the forwarddirection.
•Channel Scan ButtonsPress to scan up or down throughVCR channel numbers.
•Number ButtonsPress buttons for direct VCR channel
selections.
Power ButtonPress to turn the VCR ON and OFF.
I
'__bu Remember. The VCRttons on the remote will
not operate your VCR if thosefeatures are not already found on
your VCR remote control.
Note: All VCR functions
(particularly Search, Rewind, Fast
Forward, etc.) will operate the
same as with the original VCR
remote control provided with theVCR.
31
![Page 32: TELEVISION - Sears Parts Direct · program and the direct video output from an accessory (VCR, camera, etc.) onto the TV screen at the same time. Standard TV broadcast (VHFAIHF) or](https://reader034.vdocuments.us/reader034/viewer/2022050401/5f7eb9d2cca1b15c6c2b5cdb/html5/thumbnails/32.jpg)
ol41 1 (IIIOIC ( Oll[roJ IS ,_u[ lo
work your TV and many
infrared remote (IR) control
VCRs. However, an easy one-
time step may be necessary
before the remote will work yourVCR.
Try this initial check to see if
going on to the following section
is necessary.
[-a-ga-ra]
_ Slide the TV-VCR-CBL
I switch on the remote to VCR.
<_ Point remote toward VCR
and press the POWER button.
_Does the remote turn the VCRON?
IF YES, _ and try the otherVCR buttons on the remote. If
they also work the VCR, thenthe remote is ready and nofurther steps are needed.If NO, continue...
VCR
< First look TWO-DIGITLip kl
remote code number for your
brand VCR before going throughthe simple "1,2,3" steps (on the
following page).
Remember. If more thanne number is listed, you
may have to try more than the
first two-digit code given in order
to locate your VCR's remotecode.
continue to next page
_CR REMOTEBRAND CODE NO.Akai 24, 25, 36
Audio Dynamics 14, 21,29Broksonic 31Cannon 01
Capehart 33
Craig 07, 30Curtis Mathes 01,32, 42, 43Daewoo 33
DBX 14, 21 ,29
Dynatech 27
Emerson 20, 31,34, 40
Fisher 06, 07, 08
Funai 27, 28GE 01
Goldstar 23
Go Video 45, 46
Hitachi 03, 51
Instant Replay 01
JC Penney 01,03, 23, 29
JVC 14, 47, 48
Kenwood 13, 14
Lloyds 27
Magnavox 00, 01,02, 05, 27, 28
Magnin 30Marantz 29
Memorex 01, 07, 23, 27Minolta 03
Mitsubishi 16, 17, 38, 39, 50
Montgomery Ward 12
32
VCR REMOTE_BRAND CODE NO.
Multitech 27,28
NEC 14, 21,29Panasonic 01
Pentax 02, 03
Philco 01,02, 05, 27, 28
Philips 00, 01,02, 05, 27, 28Quasar 01
RCA 03, 04, 32, 42, 43, 44
Realistic 07,11, 12, 23, 27, 28
Samsung 22, 30Sansui 49
Sanyo 07, 13Scott 19
Sears 03, 08, 23
Sharp 11, 12Shinton 35
Sony 09, 10,41
Sound Design 27
Sylvania 00, 01,02, 05, 27, 28
Symphonic 27
Tatung 14
Teac 14, 27
Teknika 26, 27Thomas 27
TMK 20
Toshiba 18, 19
Video Concepts 28, 29
Yamaha 14, 28, 29Zenith 15
![Page 33: TELEVISION - Sears Parts Direct · program and the direct video output from an accessory (VCR, camera, etc.) onto the TV screen at the same time. Standard TV broadcast (VHFAIHF) or](https://reader034.vdocuments.us/reader034/viewer/2022050401/5f7eb9d2cca1b15c6c2b5cdb/html5/thumbnails/33.jpg)
"_T +mthat you have looked "1_
1 '_! the two-digit Remote Code
Number for your brand of VCR
(on previous page), you are
ready to follow the four simple
steps below.
Please read through steps 1.4
before beginning.
[BEGIN ]
Slide the TV-VCR-CBL
switch to ¥CR.
I <_ Press and release theRECORD button, and then
press and release the VCRPOWER button.
<_ Within thirty seconds after
releasing the VCR POWERbutton, ENTER THE TWODIGIT CODE NUMBER for
the desired VCR. The remote is
now ready to send commands tothe VCR.
<_ Point the remote at the VCR.Press the VCR POWER button
on the remote to turn the VCR
on.
Try it out. The Channel andon the remote
should now operate the VCR.
Remember. If this doesn'tork the first time, repeat
steps using the same remotecode number.
If after a second try the remotedoes not operate your VCR, andthere are more code numbers
listed for your brand VCR, usethe next listed code number.
If after repeated attempts thecode number method does not
work your VCR, try the "VCR
SEARCH" method on page 36.
V CR
_ sw_,P FRZ
P/VUE STR! SIZE
®®®®
L--,POW
33
![Page 34: TELEVISION - Sears Parts Direct · program and the direct video output from an accessory (VCR, camera, etc.) onto the TV screen at the same time. Standard TV broadcast (VHFAIHF) or](https://reader034.vdocuments.us/reader034/viewer/2022050401/5f7eb9d2cca1b15c6c2b5cdb/html5/thumbnails/34.jpg)
<
oH! I_lttol¢ ' COIIIIo_ 15 5t.;l 1()
work your TV and many
infrared remote (IR) controlCable Converters. However, an
easy one-time step may be
necessary before the remote will
work your Converter.
Try this initial check to see if
going on to the following section
is necessary.
Slide the TV-VCR-CBLswitch on the remote to CBL.
<g>
<
Point remote toward Cable
Converter and press the CBLPOWER button.
Does the remote turn theConvener ON?
IF YES, _ and try the CH • •
and CH number buttons on the
remote. If they also work theConverter then the remote is
ready and no further steps areneeded.
If NO, continue...
Cablc
Convcrtcr
TV/VCA
(2ZD
lv
vCA®®®®
< First up alook TWO-DIGFF
remote code number for your
brand Converter before goingthrough the simple "1,2,3" steps
(on the following page).
Remember. If more thanne number is listed, you
may have to try more than the
first two-digit code given inorder to locate your Converter'sremote code.
continue to next page
CONVERTER REMOTEBRAND CODE NO.Archer 28
Diamond 23Drake 37
Gemini 45
Hamlin 14, 15Hitachi 25
Jerrold 01,02,03,04,05,30,46
Macom 29, 38
Magnavox 17,26, 31NSC 49
Oak 06, 27, 39
Panasonic 18, 35
Philips 19, 20, 21,24, 26Pioneer 09, 32
Regency 10, 11
CONVERTER REMOTECODE NO.
Rembrant 33
Salora 52
Scientific Atlanta 08, 22, 47Sheritech 34
Sylvania 16Texscan 16, 48
Tocom 12,13, 53Toshiba 43
Uniden Satellite 44, 54Unika 50
Universal 36
Video Tech 40
Video Way 51Viewstar 26
Zenith 07, 41,42
34
![Page 35: TELEVISION - Sears Parts Direct · program and the direct video output from an accessory (VCR, camera, etc.) onto the TV screen at the same time. Standard TV broadcast (VHFAIHF) or](https://reader034.vdocuments.us/reader034/viewer/2022050401/5f7eb9d2cca1b15c6c2b5cdb/html5/thumbnails/35.jpg)
ow that y.u ha ve lo_ked upthe two-digit Remote Code
Number for your brand of Cable
Converter (on previous page),
you are ready to follow the four
simple steps below.
Please read through steps 1-4
before beginning.
[BE61N 1
Slide the TV-VCR-CBL
I switch to CBL.
_ Press and release the
RECORD button, and then
press and release the CBLPOWER button.
_ Within thirty seconds after
releasing the CBL POWERbutton, ENTER THE TWODIGIT CODE NUMBER for
the desired Convener (see note).
The remote is now ready to sendcommands to the Converter.
<_ Point the remote at theConvener. Press the CBL
POWER button on the remote to
turn the Convener on.
Try it out. The Channel andPOWER buttons on the remote
should now operate theConvener.
A[7_ Remember. If this doesn't.AI_K-.-.-.-.-.-.-_work the first time, repeat
steps using the same remotecode number.
If after a second try the remote
does not operate your Converter,and there are more code numbers
listed for your brand Converter,use the next listed code number.
If after repeated attempts thecode number method does not
work your Convener, try the"CONVERTER SEARCH"
method on page 37.
PLAY
35
![Page 36: TELEVISION - Sears Parts Direct · program and the direct video output from an accessory (VCR, camera, etc.) onto the TV screen at the same time. Standard TV broadcast (VHFAIHF) or](https://reader034.vdocuments.us/reader034/viewer/2022050401/5f7eb9d2cca1b15c6c2b5cdb/html5/thumbnails/36.jpg)
oltt ]V IctJtol_' c'ati be Sel to
work your VCR by what is
called the SEARCH method.
If the "REMOTE CODE" numbermethod shown in the previoussection did not set your remote to
work your VCR, then follow thefive easy steps listed below.
Please read through steps 1-5before beginning.
<_ Slide the TV-VCR-CBL
switch to VCR.
<_ Press the POWER onbutton
the VCR to turn VCR ON.
_ Stand at least six feet away fromthe front of the VCR.
Point the remote toward the
VCR.
HOLD DOWN the A/CH andVCR POWER buttons at the
same time. KEEP HOLDING
BUTTONS DOWN.
@_ Watch the Channel Indicatoron the VCR.Channel Numbers will SCAN UPwhen the VCR has been
identified. This may take up totwo minutes.
_ Release the A/CH and VCRPOWER buttons as soon as
channel numbers start to scan up.The VCR code has been identified
and the remote is ready to operatethe VCR.
__tw Remember. A minute oro can seem very long, butthe code should be located within
two minutes.
Don't let the VCR scan up morethan five channels. If you do theremote may pass up the right codeand another two minute search
cycle will have to be repeated.
If no channel change happenswithin two minutes, repeat steps!-5. Should a channel change stillnot occur, the remote will notwork with the desired VCR.
I
VCR
09L_m't Ic/the VCR scan up
more than five channels
(in Search mtxle).
® ®®®®®®®
ENTER
36
TSix Feet(minimum)
![Page 37: TELEVISION - Sears Parts Direct · program and the direct video output from an accessory (VCR, camera, etc.) onto the TV screen at the same time. Standard TV broadcast (VHFAIHF) or](https://reader034.vdocuments.us/reader034/viewer/2022050401/5f7eb9d2cca1b15c6c2b5cdb/html5/thumbnails/37.jpg)
m
our *IV remote can be set towork your Cable Converter by
what is called the SEARCH
method.
lf the "REMOTE CODE" number
method shown in the previous
section did not set your remote to
work your Con verter, then follow
the five easy steps listed below.
Please read through steps 1-5
before beginning.
<_ Slide the TV-VCR-CBL switch
I to CBL.
<_ Press the POWER button on
I the Converter to turn ConverterON.
_ Stand at least six feet away fromthe front of the Converter.
Point the remote toward the
Converter.
HOLD DOWN the A/CH andCBL POWER buttons at the same
time. KEEP HOLDING
BUTTONS DOWN.
<_ Watch the Channel Indicator
on the Converter.
Channel Numbers will SCAN UP
when the Converter has been
identified. This may take up to twominutes.
_ Release the A/CH and CBLPOWER buttons as soon as
channel numbers start to scan up.The Converter code has been
identified and the remote is readyto operate the Converter.
_[,_.o Remember. A minute ortwo can seem very long, but
the code should be located within
two minutes.
Don't let the Converter scan up
more than five channels. If you do
the remote may pass up the rightcode and another two minute
search cycle will have to be
repeated.
If no channel change happens
within two minutes, repeat steps 1-
5. Should a channel change stillnot occur, the remote will not work
-- with the desired Converter.
Cablc Convcrtcl
Don't let Ihe Q_O]i\CIIC[ :_,llJ
up more than five channels
(in Search mode).
iiiiiiiiiiii_iiiiiiiiiiiiiii_iiiiiiiiiiiiiiiiii_
Six Feet(minimum)
1PLAY
®®®®®®
37
![Page 38: TELEVISION - Sears Parts Direct · program and the direct video output from an accessory (VCR, camera, etc.) onto the TV screen at the same time. Standard TV broadcast (VHFAIHF) or](https://reader034.vdocuments.us/reader034/viewer/2022050401/5f7eb9d2cca1b15c6c2b5cdb/html5/thumbnails/38.jpg)
[)ictut e in Picture (PIP) is theshowing of two pictures on the
TV screen at the same time. (One
main screen picture and one small
reset picture - or PIP).
Note: The PIP picture must be
supplied by a VCR , camera (or
other accessory equipped with a
VIDEO OUTPUT jack).
To see how channels selected on a
VCR can be shown as PIP:
Connect the VIDEO OUT
ack on the VCR to the VIDEO
IN jack on the TV.
Also connect the AUDIO OUT (R
and L) jacks from the VCR to theAUDIO IN jacks on the TV.
Also ensure the normal antennaconnection between the VCR and
TV are in place.
<_ Move to the next page after
the VCR to TV PIP connections
are completed.
_g._ Remember. No sound will_ be heard with the PIP picture.
See page 40 on how to "SWAP"the PIP picture with the main
screen picture so that sound can beheard.
If you have a single (monaural)
Audio Output VCR, "Y"connectors are available to
comlzlete your connection. Contact
your nearest Sears RepairDepartment for details.
F :__,_,,,,_
PIP
MAiN
SCREEN
VID|-O OUT
(YELLOW)
BACK OF TV
oo%°go_%%%%%%°o%%Oo%%°#o%°%°o_%°_goo%%_o%%° go%°go%%°o%o
%%%%%%%%%%%%%%%%%%%°°%°d'o°_Oo%%°o%%%%%%°_d_
°°°°°g_°°°°°°°%%°%°g_g©°%°g# I
_ ANTENNA
f
\_
\C_R
CA BLL: TV
SIGNAL
38
![Page 39: TELEVISION - Sears Parts Direct · program and the direct video output from an accessory (VCR, camera, etc.) onto the TV screen at the same time. Standard TV broadcast (VHFAIHF) or](https://reader034.vdocuments.us/reader034/viewer/2022050401/5f7eb9d2cca1b15c6c2b5cdb/html5/thumbnails/39.jpg)
N_h w that you harv ( ompleted
e required connections onthe previous page you are ready tofollow the simple steps shownbelow.
<_ Turn the VCR and TV ON.
Place the VCR in the TV mode -Use the TV/VCR button on
the TV remote (if the remotehas been set to work with
your VCR - see page 32.)
Place the TV in theANT/CABLE mode -
Use the MENU (and M AV)
buttons on the remote to setMAIN PICTURE SOURCEcontrol to ANT/CABLE.
_,_ Select the channels on the TV
I and VCR to be watched.
<_ Press the PIP ON/OFFbutton on the remote.
_ Remember. See theIbllowing page on how to
operate other PIP features with theremote control.
12:00 AM12:00 ^M
06
VCR IN TV MODE
"VCR" indicator light will go oul."IV IN AN I/CABLE
12:00 *-
19 _ _' 12:34
VCR - PiP CHANNEL
TV - MAIN SCREEN CHANNEL
VCR __
SELECTED
CHANNEL
TV JSELECTEDCttANNEL
Be sure to point the remc)te at the
front €ff the VCR when pressingVCR function buttons.
® ® ®1 888
39
![Page 40: TELEVISION - Sears Parts Direct · program and the direct video output from an accessory (VCR, camera, etc.) onto the TV screen at the same time. Standard TV broadcast (VHFAIHF) or](https://reader034.vdocuments.us/reader034/viewer/2022050401/5f7eb9d2cca1b15c6c2b5cdb/html5/thumbnails/40.jpg)
y using the t'IP butlon._ on the
Bremote the PIP picture can be
moved and swapped with the mainscreen.
_ Press PIP ON button to show
the PIP picture.
PIP screen appears in corner of TV
screen. Press PIP ON again toremove PIP from the main screen.
<_ Press PIP POSITION button
on the remote to move the PIP
picture (from corner to corner onthe main screen).
,_ Press SWAP to the mainswapscreen picture with the PIP picture,
Press SWAP again to return themain screen and PIP to their
original positions. See the
important reminder below.
@ Press FREEZE button to holdthe current Main picture in the PIPwindow (Main picture is active).
If PIP is currently OFF the PIP will
be automatically shown.
Press FRZ repeatedly to update thefrozen PIP with current pictures.The frozen PIP cannot be swappedwith the main screen.
Press the PIP ON/OFF button to
drop the frozen PIP picture fromthe screen.
continue to next page
_dl_-_. Remember. If the PIPpicture is on the main screen
when the TV is turned OFF, ablank screen will appear when theTV is turned back ON again.
If this happens, you can either:
Press the CHANNEL • or •
buttons to select a channel for
viewing (if the VCR/AUX modehas been added to TV's channel
memory - see page 25).
Use the Picture Source Select
control (see page 12) to return theTV to the ANT/CABLE mode.
P
3. PIP SWAP
4. k'REtsZE
2. PIP POSITION
I. PIP ON / OFF
40
![Page 41: TELEVISION - Sears Parts Direct · program and the direct video output from an accessory (VCR, camera, etc.) onto the TV screen at the same time. Standard TV broadcast (VHFAIHF) or](https://reader034.vdocuments.us/reader034/viewer/2022050401/5f7eb9d2cca1b15c6c2b5cdb/html5/thumbnails/41.jpg)
J
O. lql ) S'IROI>)I_
7. PIP PREVIEW
,,,_,_ Press SIZE butloil Io
the size of the PIP window shownon the TV screen.
Press the PIP SIZE button again tosee and compare the large andsmall size PIP windows.
_ Press STROBE to see a series
of four frozen scenes from the
currently selected channel. PressSTRB again and the series ofpictures will be updated.
<_ Press PREVIEW button to see
what is showing on four channels.P/VUE starts with the currentchannel and shows the next three
channels in memory.
Every few seconds each P/VUEpicture will be updated with acurrent scene for that channel.
Press P/VUE again to go to thenext four channels in memory andso on. Just press the numberbuttons to select any previewedchannel.
41
![Page 42: TELEVISION - Sears Parts Direct · program and the direct video output from an accessory (VCR, camera, etc.) onto the TV screen at the same time. Standard TV broadcast (VHFAIHF) or](https://reader034.vdocuments.us/reader034/viewer/2022050401/5f7eb9d2cca1b15c6c2b5cdb/html5/thumbnails/42.jpg)
7 _le t'zclm c-]n-i'i(tuJ (' (PIP)Color and Tint controls are
used to adjust the color settings forPIP when it is shown on the TV
screen.
_1,_ Remember. Althoughare separate COLOR and
Select PIP COLOR (or TINT)control.
With the PICTURE/SOUND
CONTROLS on screen, move thered arrow with the MENU AV
buttons. Then press MENU button.
The PIP automatically comeson to show the PIP window on the
TV screen.
If you want to see how channelsselected on the VCR can be
viewed in the PIP window, see
pages 38-39.
Press the (+) and (-) buttons to
adjust the PIP for Color (or Tint)levels you prefer.
Press the STATUS button to
clear the screen.
there
TINT controls for PIP, the
adjustment levels for these controls
depend on the TV's main picture.
For example: If the main screen is
showing a black and white picture,PIP would also be in black and
white (even though its source is in
color).
<
PICTURE/SOUND CONTROLS
-- CLEARVIEW-- FLESHCORRECTION
I_ PIPCOLOR :%iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii
-- BASS ......_::::::_
-- TREBLE ....._:::-- BALANCE
USE _ THEN_) TOSELECT.
::::::::::::::::::::::::::::::::::::::::::::::::::::::::::.
iiiiiiiiiii!iiiiii!!i!i!i "!y....
42
TINT4]_]1111111111[_),
![Page 43: TELEVISION - Sears Parts Direct · program and the direct video output from an accessory (VCR, camera, etc.) onto the TV screen at the same time. Standard TV broadcast (VHFAIHF) or](https://reader034.vdocuments.us/reader034/viewer/2022050401/5f7eb9d2cca1b15c6c2b5cdb/html5/thumbnails/43.jpg)
m
iP hookup with (.'ableConverter Box and VCR.
First use an optional signalsplitter and connect the originalcable TV signal to both theCABLE IN on the Cable Converter
and the ANTENNA plug on therear of the TV.
_ Connect the CABLE OUT onthe Converter to the ANT. IN onthe VCR.
_,' _ Connect the VIDEO OUTjack on the VCR to the VIDEOIN jack on the TV.
Also connect the AUDIO OUT (Rand L) jacks from the VCR to theAUDIO IN jacks on the TV.
Remember to use theCable TV Convener Box to
select channels for PIP, the VCRmust be set to the same channel as
the channel selection switch on the
rear of the Cable Convener (either
channel 3 or 4).
Conlacl your nearest
Scars Repair Deparlmentto order any optional
accessories
® ®®
AUDIO VIDEOCABLES SUPPLIED
ANTENNA
OUT
®
REAR O1' 'IV
VCR
CABLI-TV CONVER'I I:R
CABLE IN
I I
43
![Page 44: TELEVISION - Sears Parts Direct · program and the direct video output from an accessory (VCR, camera, etc.) onto the TV screen at the same time. Standard TV broadcast (VHFAIHF) or](https://reader034.vdocuments.us/reader034/viewer/2022050401/5f7eb9d2cca1b15c6c2b5cdb/html5/thumbnails/44.jpg)
ld(l._L" ##l_gkC lJl_3r ,mlltJle
checks before calling forservice. These tips can save youtime and money since charges forTV installation and adjustment ofcustomer controls are not
covered under your warranty.
No Power
NO picture
NO Sound
Remote Does Not
Work
TV Disolavs Wrong
Channel or No
Channels Above 13
CAUTION: A video source tsuch as a video g_.tllle,ConJt)act Disc lutclactivc - CDI, Or
TV infornlation channel) which shows a constant non-moving pattern on the TV screen,can cause picture tube damage. When your TV is continuously used with such a sourcethe pattern of the non-moving portion of the game (CDI, etc.) could leave an image
permanently on the picture tube. When not in use, turn the video source OFF.Regularly alternate the use of such video sources with normal TV viewing.
i heck the TV power cord. Unplug the TV, wait 1 minute, then reinsert plug into outlet]and push POWER button again. ICheck to be sure outlet is not on a wall switch.
i heck antenna connections on the rear of the TV. Arc they properly secured to theantenna plug on the TV?Check the CABLE CHANNEL TUNING control for correct position.Check PICTURE SOURCE control for correct position. VCR/AUXI position withouta signal source will result in a blank screen.
UCheck the VOLUME buttons.
Check the MUTE button on the remote control..
Check the INTERNAL TV SPEAKER ON/OFF control for the correct position.
If attempting auxiliary equipment hook-ups, check audio jack connections and that theauxiliary equipment is on and in the proper operating modes.
I heck position of TV/VCR/CBL slide switch on the remote. The switch must be in the
TV position for the remote to send commands to the TV.Check batteries. Replace with 9-Volt Heavy Duty (Zinc Chloride) or Alkaline batteriesif necessary.Clean the remote and the remote sensor window on the TV.
i Repeat channel selection. ]Add desired channel numbers (ADD/DELETE CHANNELS control) into TV nlenlory.Check CABLE CHANNEL TUNING control for correct position.
This TV is equipped with protective circuitry that shuts the TV oft in case of moderate
power surges. Should this occur turn the TV back on by pressing the POWER button [once or twice, or unplug and then replug the power cord at the AC outlet. ]
This feature is NOT designed to prevent damage due to high power surges such as those
caused by lightning, which is not covered by your warranty.
Cleaniug and talc• To avoid possible sliock hazard be sure the TV is unplugged from the electrical outlet before cleaning.
When cleaning the TV screen take care not to scratch or damage the screen surface (avoid wearing jewelry or usinganything abrasive- do not use household cleaners). Wipe the front screen with a clean cloth dampened with water. Use
even, easy, vertical strokes when cleaning.Specially designed screen cleaning kits are also available which contain anti-static cleaners and brushes designed to getinto the ridges of the TV screen. If interested, ask your nearest Sears Repair Department for details.Gently wipe the cabinet surfaces with a clean cloth or sponge dampened in a solution of cool clear water and a mild soapor detergent. Use a clean dry cloth to dry the wiped surfaces.Occasionally vacuum the ventilation holes or slots in the cabinet back.Never use thinners, insecticide sprays, or other chemicals on or near the cabinet, as they might cause permanent marringof the cabinet finish.
44
![Page 45: TELEVISION - Sears Parts Direct · program and the direct video output from an accessory (VCR, camera, etc.) onto the TV screen at the same time. Standard TV broadcast (VHFAIHF) or](https://reader034.vdocuments.us/reader034/viewer/2022050401/5f7eb9d2cca1b15c6c2b5cdb/html5/thumbnails/45.jpg)
m
n Accc'._L_oO, 5hell has beensupplied to you that can be
mounted to the rear of the TV. This
shelf can give you a wider, morestable area on which to set
optional accessories.
To attach the shelf"
<_ Place Accessory tothe Shelf
the top back of the TV cabinet.
Be sure the holes on the shelf line
up with the predrilled holes on theTV cabinet.
_ Screw the shelf into Beplace.
sure the shelf's backstop edge is
pointing up.
Use the the same four screws that
came with the shelf for final
attachment.
<_ Once securely placein the
shelf is ready to be used as asupport for your most commonelectronic accessories
PREDRILLED HOLLS ON RLAR OI, TViii::
:!!!i!i!!!i!!!!!!!!!i!i!i!!!!!!!!!!!!!!!!!!i::.Note: For shipment the accessory shel_ _i_i_ebed tOthe side of your TV cabinet back. Just I_iig_i:_crewsthat hold the shelf to the TV cabinet. Kee_ii_iiii_iiiii_s
as they will be used later to reattach the s_i_ii:iii_iiiiii:_iiiiiiiiii_iiiiiiii_iiiii!iiiiii_iiiiiiiiiii_i::ii:i! ii_iii:!: : !i :: !i:: : !::: : !i!_i_ii:!ii_iiii_;_i::"i'?i'i'i'i'i'i'i'i'i'i'i'? ????? ??:'?? ???:'?i'i'i'i'i'i'i'i'i'i'i'_
45
![Page 46: TELEVISION - Sears Parts Direct · program and the direct video output from an accessory (VCR, camera, etc.) onto the TV screen at the same time. Standard TV broadcast (VHFAIHF) or](https://reader034.vdocuments.us/reader034/viewer/2022050401/5f7eb9d2cca1b15c6c2b5cdb/html5/thumbnails/46.jpg)
Coaxial Cable * A siJ_glcstolid ZUdCnll_.| wire llOlreally mzttchedwith a metal plug (F-type) end connector that screws (or pushes)directly onto a 75 Ohm input found on the Television or VCR.
Display * An on screen message or graphics that help the user
operate and adjust his Television feature controls. See OnScreen Displays (OSD).
Direct Audio/Video Inputs * Located on the rear of the TVthese connectors (RCA phono type plug) are used for the inputof audio and video signals. Designed for use with VCRs (orother accessories) in order to receive higher picture resolutionand offer sound connection options.
Identify * Method by which a remote control searches and finds
an operating code for another product (such as a VCR or CableConverter.) Once the code has been "identified" then the TVremote can send commands to and operate the other product.
Multichannel Television Sound (MTS) * The broadcaststandard that allows for stereo sound to be transmitted with the
TV picture.
On Screen Displays (OSD) * Refers to the wording or
messages generated by the television (or VCR) to help the user
with specific feature controls (color adjustment, programming,etc.).
Menu * An on-screen listing of feature controls shown on theTelevision screen that are made available for user adjustments.
I'icture -In-Picture (i'll') * Tel Ill u_cd wht:_ twt_pictul c,',m cshown on the TV screen at the same time. The smaller PIP
picture is supplied by a VCR (or other tuner/video playbacksource). The PIP picture can also be moved and swapped withthe TV's main screen picture.
Programming * The procedure of adding or deleting channelnumbers into the Television's memory circuits. In this way
the Television "remembers" only the locally available ordesired channel numbers and skips over any unwantedchannel numbers.
Remote Sensor Window * A window or opening found onthe Television control panel through which infrared remote
control command signals are received.
Second Audio Program (SAP) * An additional audio
channel provided for in the Multichannel Television Sound(MTS) broadcast standard. The most frequently proposed use
for SAP is the simultaneous bilingual broadcast of TV
program material.
Status * Allows the user to quickly confirm what channelnumber is currently being viewed. Status can also be used toclear the Television of on screen displays or information(rather than waiting for the displays to "time out" or
automatically disappear from the screen).
Twin Lead Wire * The more commonly used name for thetwo strand 300 Ohm antenna wire used with many indoor andoutdoor antenna systems. In many cases this type of antennawire requires an additional adapter (or balun) in order toconnect to the 75 Ohm Input terminals designed into the morerecent Televisions and VCRs.
46
![Page 47: TELEVISION - Sears Parts Direct · program and the direct video output from an accessory (VCR, camera, etc.) onto the TV screen at the same time. Standard TV broadcast (VHFAIHF) or](https://reader034.vdocuments.us/reader034/viewer/2022050401/5f7eb9d2cca1b15c6c2b5cdb/html5/thumbnails/47.jpg)
At;'cc_,tJi lc_iUi)Ilt,,ii,ii ...................... <i, .'), J'l, E_;, J_, 4J
Accessory Shelf Installation ...................................................45
Add/Delete Channels ....................................................6, 24, 25
Advance Buttons ..................................................................... 10
Audio Controls ............................................................ 15-17, 27
Audio/Video Input ...................................................... 28, 38, 43
Automatic Programming ................................................ 6, 7, 24
Battery Installation .................................................................... 9
Cable TV Connections/Settings .................... 6, 7, 23, 28, 38, 43
Channel/Time Display ...................................................... 21,22
Channel Memory ...................................................... 6, 7, 24, 25
Channel/Time Reminder ......................................................... 21
Clock Setting .......................................................................... 18
Closed Captioning .................................................................. 20
Convergence ........................................................................... 26
Controls/TV ........................................................................ 8, 10
Controls/Remote ..................................................... 9, 11, 30, 40
Exit .................................................................................... 10, 30
Factory Reset .......................................................................... 30
Features ..................................................................................... 3
First Time Set Up ...................................................................... 6
(51os,_aiyi 1¥ i trills ................................................................ 46
Inputs/Audio and Video .............................................. 28, 38, 43
Menu ....................................................................................... 10
Minus(-)/Plus (+) Buttons ................................................. 10, 30
Picture-In-Picture (PIP) ..................................................... 38-43
Power Light Indicator ............................................................... 8
Precautions/Safety .......................................................... 2, 3, 44
Remote Control ................................................. 9, 11,30-37, 40
Reminder/Time and Channel .................................................. 21
Second Audio Program (SAP) Light ...................................... 17
Sensor Remote .................................................................... 8, 30
Sleep Timer ............................................................................. 19
Status Button ..................................................................... 10, 30
Stereo Light Indicator ............................................................. 17
Surround Sound ...................................................................... 29
Time/Channel Display ...................................................... 21,22
VCR Button ........................................................................ 8, 28
VCR/TV Connections ............................................. 7, 28, 38, 43
Tips for Service ....................................................................... 44
TV Speaker Switch ................................................................. 27
Warranty ................................................................................. 48
,17
![Page 48: TELEVISION - Sears Parts Direct · program and the direct video output from an accessory (VCR, camera, etc.) onto the TV screen at the same time. Standard TV broadcast (VHFAIHF) or](https://reader034.vdocuments.us/reader034/viewer/2022050401/5f7eb9d2cca1b15c6c2b5cdb/html5/thumbnails/48.jpg)
OWNERSMANUAL
MODEL NO.
626.54618390
SERIES
SEARSREMOTE CONTROLPROJECTION TELEVISION
Your Sears Television has added value when youconsider that Sears has service units nationwidestaffed with Sears-trained technicians profes-sional technicians specifically trained on Searshome entertainment products, having the parts,tools and equipment to ensure that we meet ourpledge to you - "We Service What We Sell."
Should a need ever exist for repair parts or service,simply contact any Sears Service Center/Depart-ment.
Warranty
FULL ONE YEAR WARRANTY ON TELEVISION EXCEP fSCREEN
For one year from the date of purchase (except for screen),Sears will repair this television, free of charge, if defective inmaterial or workmanship.
FULL 90 DAY WARRANTY ON SCREEN
For 90 days from the date of purchase, Sears will repair thescreen, free of charge, if defective in material or workmanship.
LIMITED TWO YEAR WARRANTY ON PICTURE TUBES
For two years from the date of purchase, Sears will furnishfree of charge a replacement for picture tubes, if defective inmaterial or workmanship. You pay for labor.
WARRANTY SERVICE IS AVAILABLE BY CONTACTING THENEAREST SEARS SERVICE CENTER/DEPARTMENT IN THE
UNITED STATES. This warranty applies only while thisproduct is in use in the United States.This warranty gives you specific legal rights, and you mayalso have other rights which vary from state to state.
Sears, Roebuck, and Co., Dept. 817WA,Hoffman Estates, IL 60195
IB6856 E001