telemetrics ppt camera_control_system

OUTSIDE BROADCAST - STUDIO PRODUCTION - ON LOCATION SHOOTING© Telemetrics Inc. 2011. All Rights Reserved.

Specifications and features subject to change without notice

AN INTRODUCTION TO

THE TELEMETRICS 55D CAMERA CONTROL SYSTEM

1

OUTSIDE BROADCAST - STUDIO PRODUCTION - ON LOCATION SHOOTING

© Telemetrics Inc. 2011. All Rights Reserved.Specifications and features subject to change without notice



Contents of this presentation

PART 1

CAMERA LINKS AND THEIR PART IN PRODUCTION COSTS

& FLEXIBILITY

PART 3

TELEMETRICS 55D TECHNICAL

DIAGRAMS AND ARCHITECTURE

PART 2

THE TELEMETRICS 55D CAMERA CONTROL

SYSTEM PART OF THE SOLUTION



Pressure on television production costs

Studio cameras are expensiveFor multi-camera productions studio cameras with full camera control are expensive investments.

Triax links are expensiveTriax links are expensive, with high cable costs per foot

Transport cost are expensiveThe heavy weight of studio cameras with triax makes transport costs high, or require larger OB vehicle (more investment).

Alternative systems have high indirect costsAlternative equipment usually means additional investment in video equalizers, frame synchronizers, intercom adaptors, microphone phantom power and batteries at the camera.



Pressure on television production creativity

Limited to one camera manufacturerMost camera links are built for one specific camera manufacturer – only fitting and working with their camera and control panels.

Complex system operationMost alternatives require a complex system around them to operate – video equalizers, frame synchronizers, intercom adaptors, mic phantom power and batteries at the camera.




PART 1


& FLEXIBILITY

PART 3



PART 2





Telemetrics provides a lower cost of ownership

Reduced additional equipmentWith Telemetrics the whole solution is simple. No need for video equalizers, frame synchronizers, intercom adaptors, microphone phantom power or batteries at the camera.

All you need is the Telemetrics camera adaptor at the camera, the coax / fiber cable, and the Telemetric base station connected to the manufacturer’s camera control unit.

1,000’ of SMPTE Hybrid Cable - $2,8001,000’ of Belden 8233 RG11 - $2,0451,000’ of RG-59U + OpticalCon Fiber - $1,457




Reduced additional equipment

Reduced cable costThe Telemetrics 55D camera control system uses low cost coaxial cable as standard or fiber optic cable for longer lengths. These are lower price per meter than traditional triax or the multi-core cables typically used in other systems.





Reduced cable cost

Reduced camera link costThe Telemetrics 55D camera control system is significantly lower cost than triax solutions and is highly competitive with other camera link systems. Indeed, for like-for-like functionality we will typically not be beaten on price.





Reduced cable cost

Reduced camera link cost

Reduced transport and support costsMore cameras can be fitted into OB vans, or smaller OB vans can be used for the same number of OB vans, as the Telemetric 55D is significantly lighter.





Reduced cable cost


Reduced transport and support costs1,000’ of 3/8” Triax Cable = 85 pounds1,000’ SMPTE 311M Fiber = 96 pounds1,000’ of RG-59 + OpticalCon Fiber = 47 poundsLighter Weight = Less Shipping Cost, Less Fuel Costs, Increased Profits!



Telemetrics enables more creative flexibility

Freedom of camera manufacturerThe Telemetrics 55D camera control system can be configured to work with almost any JVC, Panasonic and Sony ENG camera and remote control panel (ROP), giving you the freedom to use the cameras of your choice.




Freedom of camera manufacturer

More functionality in one systemThe Telemetrics 55D camera control system provides a high quality camera video to the base station, return video, camera control, tally / GPI, program audio, return audio, intercom and camera power all in one system.





More functionality in one system

Longer distance capabilityThe Telemetrics 55D camera control system can be adapted to coax or fibre optic cable depending on the distance required, enabling SD SDI transmission up to 2041 feet with low cost coax cable or HD SDI to 3000 with fiber optic cable.



Summary of the benefits of the Telemetrics 55D


More functionality in one system

Longer distance capability


Reduced cable cost


Reduced transport and support costs

Reduction in Production Cost Increase in Production Flexibility




PART 1


& FLEXIBILITY

PART 3



PART 2





Camera Adaptor 55D-CA



Camera Control Unit 55D-BS



HD Fibre Link Base Station HDFL-BS



Basic System

Composite Standard Definition – Single Coaxial Cable

1/3/2012 20



Powering 2 cameras up to 45 watts each



Basic System

HD-SDI – Dual Coaxial Cable

1/3/2012 22



Single-camera SD/HD SDI over fibre system

HD Fibre Link Base Stationfor video over fibre links

(can take up to 4 cards, each capable of 1 fibre in and 2 SD/HD SDI out)

Coax Link Base Stationfor camera control and communications



Multi-camera SD/HD SDI over fibre operation



Fiber System



Camera Adapter with OpticalCon Connector

• -Robust Enough For Field Use

• -Self-Capping Fiber Ends

• -Dual Fiber Strands for Redundancy



Camera Adapter with OpticalCon Connector on the Panasonic HPX-370

• Can power the HPX-370 3,000’ over RG-11U Cable



HD Fiber Link Base Station

for video over fiber links (can take up to 4 cards, each capable of 1 fiber in and 2 SD/HD SDI out)



HD Fiber Link Base Station

with PC-Telesoft Camera Control Software Replacing Control Panels

telemetrics ppt camera_control_system

Entertainment & Humor

camera linksthe telemetrics

d telemetrics

location shooting telemetrics

camera linksystems

notice specifications

specific camera manufacturer

high cable costs

transport costs