teledyne tss - geo-matching.com€¦ · teledyne tss head office: 1 blackmoor lane, croxley park,...

A Teledyne TSS Product Selection Guide

Teledyne TSSWorld Leaders in Marine Instrumentation

MOTION SENSORSProduct Selection Guide

A member of Teledyne Marine

---------------------- Dual redundant frequencies. Packet output via TCP, UDP or UDP multicast ----------------------

Roll and Pitch +/- 5° Dynamic (RMS)Roll and Pitch +/- 30° Dynamic (RMS)Heave

Data Resolution

Digital Data Output Rate

Analogue Data Output Rate

Dimensions (mm) (excluding connector)Weight in Air (3000m/6000m)Weight in Water (3000m/6000m)

MTBF

Digital Interface

Analogue InterfaceEthernetApplication Software

Hydrographic Survey - Multibeam

Dynamic Positioning

Crane De-ratingRig MonitoringROV - Work ClassROV - Inspection ClassHelideck Motion Monitoring*

Hydrographic Survey - Single Beam

Hull Stress Monitoring•••••••

••

DMS-05 DMS-10Application

T H E T E L E D Y N E T S S M O T I O N S E N S O R S R A N G E

Pick your Motion Sensor...a simple 3-step process

Product Specifications

1 with compatible software application - not supplied

Full attitude sensors for accurate motionmeasurement in all sea and subsea conditions

RP sensors for accurate roll and pitchcompensation

Highly flexibleheave sensor

Full attitude sensors for accurate surface motion measurement

RP sensors for accurate roll and pitch compensation ofsurface applications

Highly flexible heave sensor

•••••••

••

•••••••

••

DMS-25 DMS-RP25

••

•••

••

•

DMS-RP30 DMS-H

••

•••••

•

••

DMS-525 DMS-550

••••

•

••

••

•

DMS-525RP DMS-535RP

••

•

••

•

DMS-550RP DMS-500H

••

•

5cm or 5%

Heave 1cm,Roll and Pitch 0.01°

Up to 100Hz

0.05°0.03°

Up to 500Hz(with optional DMS repeater)

RS232 or RS4222

Via optional DMS repeater

DMSView for Windows™

99 (ø) x 172 (h)2.3kg / 4.0kg

Power SupplyPower RequirementPower Over EthernetDepth RatingOperating Temperature

1.0kg / 2.7kg12-36Vdc (2A supply)

<6.5W

3000m (6000m request)

-15°C to +55°C

5cm or 5%

Up to 100Hz

0.10°0.06°

RS232 or RS4222



99 (ø) x 172 (h)2.3kg / 4.0kg1.0kg / 2.7kg

12-36Vdc (2A supply)

<6.5W


-15°C to +55°C

5cm or 5%

Up to 100Hz

0.25°0.15°

RS232 or RS4222



99 (ø) x 172 (h)2.3kg / 4.0kg1.0kg / 2.7kg


<6.5W


-15°C to +55°C

Up to 100Hz

0.25°0.25°

RS232 or RS4222



99 (ø) x 172 (h)2.3kg / 4.0kg1.0kg / 2.7kg


<6.5W

-15°C to +55°C

Up to 100Hz

0.30°0.30°

RS232 or RS4222



99 (ø) x 172 (h)2.3kg / 4.0kg


<6.5W

-15°C to +55°C

5cm or 5%

Heave ±10m

Up to 100Hz

RS232 or RS4222



99 (ø) x 172 (h)2.3kg / 4.0kg


<6.5W

-15°C to +55°C

5cm or 5%

Up to 100Hz

0.25°0.05°

RS232 or RS4222, Ethernet


DMS500View for Windows™

160 x 160 x 1603

4.0kg


<12WIEEE 802.3AF-2003

-15°C to +55°C

5cm or 5%

Up to 100Hz

0.50°0.10°

RS232 or RS4222,Ethernet



160 x 160 x 1603

4.0kg


<12WIEEE 802.3AF-2003

-15°C to +55°C

Up to 100Hz

0.25°0.25°




160 x 160 x 1603

4.0kg


<12WIEEE 802.3AF-2003

-15°C to +55°C

Up to 100Hz

0.35°0.35




160 x 160 x 1603

4.0kg


<12WIEEE 802.3AF-2003

-15°C to +55°C

Up to 100Hz

0.50°0.50°




160 x 160 x 1603

4.0kg


<12WIEEE 802.3AF-2003

-15°C to +55°C

5cm or 5%

Up to 100Hz




160 x 160 x 1603

4.0kg


<12WIEEE 802.3AF-2003

-15°C to +55°C

Heave ±10m,Roll and Pitch ±30° Roll and Pitch ±30°Maximum Calibrated Range Heave ±10m,

Roll and Pitch ±30°Heave ±10m,

Roll and Pitch ±30° Roll and Pitch ±30° Heave ±10m,Roll and Pitch ±30°

Heave ±10m,Roll and Pitch ±30° Roll and Pitch ±30° Roll and Pitch ±30° Roll and Pitch ±30° Heave ±10m

Heave 1cm,Roll and Pitch 0.01°

Heave 1cm,Roll and Pitch 0.01° Roll and Pitch 0.01° Roll and Pitch 0.01° Heave 1cm Heave 1cm,

Roll and Pitch 0.01°Heave 1cm,

Roll and Pitch 0.01° Roll and Pitch 0.01° Roll and Pitch 0.01° Roll and Pitch 0.01° Heave 1cm






50,000 hours 50,000 hours 50,000 hours 50,000 hours 50,000 hours 50,000 hours 50,000 hours 50,000 hours 50,000 hours 50,000 hours 50,000 hours 50,000 hours2 Selectable RS232 or RS422 software 3240mm max at base

Step 1: Find your Application

Step 2: Identify the Product

Step 3: Select the Specification

Where is a motion sensor used?Marine motion sensors are used to accurately measure a vessel’s roll, pitch and heave movement that is generated by the sea and it’s conditions. TSS motion sensors are designed to be used to provide compensation data to ship systems on board surface and subsea vessels and platforms. This in turn enables other systems to provide accurate and reliable data essential to the vessel’s efficient operation. When combined with other inputs such as position from GPS systems, a motion sensor becomes an essential part of the vessel’s operational equipment. Heave-only sensors are designed for integration with a wide range of echosounding equipment that is pivotal to accurate hydrographic survey and mapping programmes. These can also work alongside existing RP sensors for crane and platform motion measurement operations. These applications below (as well as others) all have a requirement for accurate motion measurement in various forms.

Hydrographic Survey Dynamic Positioning Hull Stress Monitoring Crane De-rating

Rig Monitoring Work Class ROVs Inspection Class ROVs Helideck Motion Monitoring

CURRENT

deg

kts

351.11.0

deg

kts

351.1WIND

296.51.2

0.075Range

0.025 [nm]

Grid

EBL

FORCE BIASNEW SETUPPRESENTAUTO POSMidships StbdTrawl

RoTPnt: StbdTrawl

X -33.6 mY 15.2

N

E

S

W

1020

30

40

50

60

80

70

100

110

120

130

140

150

160170190

200

210

220

230

240

250

260

280

290

300

310

320

330

340350

39 01.4698073 02.2622

Heading: deg029.2ROT: deg/m-5.4

Speed: kts-0.0kts-0.1

W E

0.5 m

4.2 deg

Heading X

Heading Rate of Turn

New SetpointWarning Shortest turn is alwyas used 025.0

Offset From Present Setpoint 0.0

[deg]

deg

Strategy System Selected Operator Selected 348.4 deg

OK ApplyCancel

What sets us apart?TechnologyDesigned to enable high productive hydrographic survey in all sea conditions, TSS attitude and motion sensors are proven to negate the errors associated with motion and will exceed the requirements of IHO standards. 3rd generation technology has enabled the latest DMS sensors to be extremely accurate, highly flexible and fully compatible with most multibeam and single beam echosounders. The purpose-built software programme that accompanies the DMS in standard customer packages is an intuitive Windows™ based programme providing a familiar operating environment for the user. ServiceTeledyne TSS operates a 24 hour, 365 days a year technical support hotline for all products. The DMS motions sensors are delivered with a 24 month warranty whilst the MiniSense products are supplied with a 12 month warranty period. Extended warranties are available at an additional cost.

A Sea of Solutions, One Supplier: IMAGING • INSTRUMENTS • INTERCONNECT • SEISMIC • VEHICLES

Specifications subject to change without notice. © 2017 Teledyne Ltd. All rights reserved. TTMPG/1017/V2.1

Teledyne TSSHead Office: 1 Blackmoor Lane, Croxley Park, Watford, Hertfordshire WD18 8GA UK • Email: [email protected]

Aberdeen: ABZ Business Park, International Avenue, Dyce, Aberdeen AB21 0BH UK • Email: [email protected]

www.teledynemarine.com

teledyne tss - geo-matching.com€¦ · teledyne tss head office: 1 blackmoor lane, croxley park,...

Documents