tele: 23018523 86435/misc/s2 ,/e4 (u3) engineer -4 data...tele: 23018523 86435/misc/s2_,/e4 (u3) v,...

Tele: 23018523

86435/Misc/s2_,/E4 (U3) v, Apr 2020

ENGINEER- IN- CHIEF'S BRANCH Sub-Dte of Utility (E-41

UPLOADING OF PHE POLICIES AND ESTIMATING DATA-2016 EIM & PHE

1 It is seen that on MES website, mes.gov.in ,the following policies of PHE not

available for users- 2017 (a) E-in-C Branch letter No 86435/Misc/E4(U3) dated 19 May

(b) Estimating data -2016( E/M & PHE Work)

2 The policies referred above are decisive for planning and designing of PHE

schemes

3. It is requested to upload the policies for dissemination of the same.

v't (K VCi ayaka) Lt C SO-1 E-4 (U3)

Automation Cell

Enclosures: As above

ESTIMIATING DATA 2016 FOR E/M and PHE WORKS OF MES

Page 1 of 117

ESTIMATING DATA 2016


Page 2 of 117


Page 3 of 117


Page 4 of 117

D K TYAGI, IDSE

Chief Engineer Jt DGW(Utility)

Military Engineer Services, Sub Dte of Works (Utilities),

Engineer-in-Chief’s Branch, Integrated HQ MoD(Army),

Kashmir House, Rajaji Marg, New Delhi 110001

Tel & Fax :011 23019109

PREFACE

Estimating Data for E/M items was last revised in the year 2007.

Since then it is being used for all estimates in spite of all round increase

in rates of various items. The earlier ED was formulated based on RC

rates the items available on RC of DGS&D. However a policy decision has

been taken to do away with RC items and use the items of known makes

and brands so as to improve the image of organization and provide better

quality services.

The work of revision of ED was undertaken in the year 2015 when

rates of certain water supply items and PHE related items were revised in

the interim. The new revised ED 2016 has now been worked out based

on rates obtained from reputed brands minus the available rebates plus

the add on like excise duty, sales tax, transportation charges, service tax,

work contract tax and contractor profit etc. The arrived rates have been

compared for consistency with rates available from various State and

Central Government agencies.

Each HQ CE Command was entrusted the work of preparation of

ED for certain items and finally all item rates were compiled at E-in-C’ Br.

The sincere work done by all including Commands is hereby

acknowledged. This includes the team of PHE experts from ADG (D&C )

and from E-in-C’ Br. The valuable suggestions given by DGW also

resulted in enhanced usefulness of the document.

It is sanguinely presumed that this document will result in pragmatic

estimates of all E/M related schemes and necessary feedbacks received

from ground especially for LED lamps and Solar panels etc will improve

the value of the ED 2016. At E-in-C Branch the special mention is due for

Shri S K Arora and Shri Sunil Aggrawal Directors at Utility Sub Dte who

have worked whole heartedly to make it happen.


Page 5 of 117

SECTION DESCRIPTION ITEM No

Section 1

External Electrification

1 to 761

GENERATING SET DIESEL ENGINE DRIVEN 1 to 30

TRANSFORMERS 31 to 48

HT SWITCH GEAR 49 to 56

SF6 CIRCUIT BREAKER 57 to 65

HT CTs & PTs 66 to 73

COMPACT SUB STN 74 to 81

LOAD BREAK SWITCH 82 to 83

GANG OPERATED AIR BREAK SWITHCHES 84 to 93

RUBBER MAT AND HAND GLOVES 95 to 98

LT SWITCH GEAR 99 to 104

COMPACT AIR INSULATED RISING MAINS 105 to 122

BUS TRUNKING 123 to 142

PLUGGING BOXES 143 to 148

CAPACITOR 149 to 213

LT SWITCH 214 to 228

RCCB & MCCB 229 to 280

ON LOAD CHANGE OVER SWITCH 281 to 316

VOLTAGE STABILIZER & UPS 317 to 353

ARMOURED XLPE CABLES & COPPER CONDUCTOR

354 to 402

CABLE JOINTING KIT & CABLE GLAND 403 to 453

AERIAL BUNCHED CABLE & OVER HEAD LINE ON POLE

454 to 542

4 POLE AND 2 POLE STRUCTURE 543 to 550

LIGHTING ARRESTORS & EARTHING 551 to 555

SERVICE CONNECTIONS & METERS 556 to 573

FANS 574 to 586

TIME SWITCHES & STREET LIGHT / FLOOD LIGHT

587 to 611

LED STREET LIGHTS, FLOOD LIGHTS & POST TOP LANTERNS

612 to 628

INDUSTRIAL LIGHT FITTING & BULK HEAD FITTINGS

629 to 632

INDOOR LIGHT FITTINGS & LED INDOOR LIGHTS

633 to 666

HIGH MAST LIGHTS 667 to 669

SHADOWLESS LIGHT FITTINGS 670 to 673


Page 6 of 117

FLAME PROOF, WEATHER PROOF, DUST PROOF, DUST TIGHT & TOTALLY ENCLOSED LIGHT FITTINGS

674 to 696

PCC POLES, STEEL TUBULAR POLES & SWAN NECK TYPE POLES

697 to 710

CRANES 711 to 738

LIFTS 739 to 753

LIGHTING PROTECTION 754 to 757

EXCAVATION BY TRENCHLESS TECH 758 to 758

SOLAR PV GENERATION 759 to 761

Section 2

External Water Supply

1001 to 1472

TUBE WELLS 1001 to 1014

PUMPSET / STARTER 1015 to 1061

DISINFECTION,TREATMENT PLANTS 1062 to 1061

METALLIC PIPES 1072 to 1161

UPV & PP-R PIPES 1162 to 1209

VALVES & STRAINER 1210 to 1313

STOP COCK & BIB COCK 1314 to 1325

HOT WATER APPARATUS 1326 to 1337

FIRE FIGHTING 1338 to 1416

BEAM MASTER DETECTOR 1417 to 1418

ANNUCIATING DEVICES 1419 to 1429

PA SYSTEM 1430 to 1447

SWIMMING POOL FILTRATION PLANT 1448 to 1451

PRESSURE FILTER 1452 to 1460

SWIMMING POOL WATER TREATMENT 1461 to 1468

RO PLANT 1469 to 1472

Section 3

Refrigeration, Air Conditioning, Refrigerators & Central Heating System

1501 to 1584

REFRIGERATORS 1501 to 1504

WATER COOLER 1505 to 1508

DEEP FREEZER 1509 to 1512

EVAPORATIVE COOLER (DESERT COOLER) 1513 to 1517

WINDOW AIR CONDITIONER 1518 to 1520

SPLIT AIR CONDITIONER 1521 to 1523

AIR CONDITIONER CASSETTEE TYPE 1524 to 1526

PACKAGE TYPE AIR CONDITIONING 1527 to 1532

CENTRAL AIR CONDITIONING PLANTS 1533 to 1541

PRECISION AIR CONDITIONING 1542 to 1545

AIR CURTAIN 1546 to 1550

CHEMICAL DEHUMIDIFIERS 1551 to 1556

CENTRAL HEATING SYSTEM 1557 to 1570

BOILER(OIL FIRED) 1571 to 1584


Page 7 of 117

Section 4

Tools & Plants

2201 to 2322

ALUMINUM LADDER 2201 to 2205

CRIMPING TOOLS 2206 to 2214

DIGITAL METER 2215 to 2220

OTHER METER 2221 to 2231

DRILL & BLOWER 2232 to 2233

COMMON HAND TOOLS 2234 to 2300

CENTRIFUGE MACHINE FOR TRANSFORMER OIL 22301 to 2304

DISCHARGE ROD 2305 to 2309

CABLE FAULT LOCATING MACHINE 2310 to 2311

WATER SUPPLY 2312 to 2321

SWIMMING POOL 2322

Section 5

Public Health Engineering with tech data

3001 to 3185

GRAVITY SEWERS 3001 to 3040

SEPTIC TANKS AND SHALLOW SEWER 3051 to 3065

SOAL WELLS 3068 to 3082

SUMP WELL CUM PUMP HOUSES 3101 to 3133

SUBMERSIBLE PUMPS 3134 to 3155

SEWAGE TREATMENT PLANT (MBBR Based) 3171 to 3185

Section 6

Technical Data for Section 1 to 4

Appendix ‘A’


Page 8 of 117

SECTION - 1

(EXTERNAL ELECTRIFICATION)

( Item No 1 TO 761 )


Page 9 of 117

Item No Description of Item Unit Rate

SECTION - 1 (EXTERNAL ELECTRIFICATION)

( Item No 1 TO 761 )

GENERATING SET DIESEL ENGINE DRIVEN

1

Supply and installation of silent Diesel Engine driven generating set 415 volts, 3 phase 4 wire, engine as per IS:10001/ 10002 and Alternator as per IS: 13364 complete with foundation (as per OEM design), control panel with necessary meter and sound proof canopy as per CPCB norms of capacity upto 10 KVA

KVA 42,599

2 -do- but above 10 KVA & upto 15 KVA KVA 30,364





7 -do- but above 50 KVA & upto 62.5 KVA KVA 13,202

8 -do- but above 62.5 KVA & upto 82.5 KVA KVA 11,874

9 -do- but above 82.5 KVA & upto 100 KVA KVA 11,617






15 -do- but above 500 KVA KVA 9,716

GENERATING SET DIESEL ENGINE DRIVEN WITH AMF PANEL

16

Supply and installation of silent Diesel Engine driven generating set 415 volts, 3 phase 4 wire, engine as per IS:10001/ 10002 and Alternator as per IS: 13364 complete with relay panel and switch gears for automatic starting on main failure, control panel having meter and sound proof canopy as per CPCB norms and foundation etc. of capacity upto 10 KVA

KVA 49,435





Page 10 of 117




22 -do- but above 50 KVA & upto 62.5 KVA KVA 15,791

23 -do- but above 62.5 KVA & upto 82.5 KVA KVA 13,838

24 -do- but above 82.5 KVA & upto 100 KVA KVA 13,806






30 -do- but above 500 KVA KVA 10,722

Building for Generator is not required but operator rest room, toilet & store for fuel is to be planned and estimated separately.

TRANSFORMER 11 KV/433 V VOLTAGE RATIO

31

Supply and installation of copper wound transformer step up/ step down, indoor/outdoor type complete with standard fittings, HT 11 KV 3 Phase, LT 433 volts, 3 Phase 4 wire with off load tappings on HT side to vary secondary voltage within limit, all as per IS:2026 of capacity upto 63 KVA

KVA 4,708

32 -- do -- but of capacity above 63 KVA and upto 100 KVA

KVA 5,121


KVA 3,629


KVA 2,920

35 .--do-- above 200 KVA and up to 300 KVA KVA 2,814


KVA 2,285


KVA 2,042

38 -- do -- but of capacity above 500 KVA and upto 750 KVA.

KVA 2,042

39 -- do -- but of capacity above 750 KVA KVA 1,767

Note: Same rate, as above, are applicable for BEE 3 star rated 11 KV/433 V distribution transformer, Aluminium wound up to 200 KVA capacity.


Page 11 of 117


TRANSFORMER 33 KV/11K V WITH “OFF LOAD” TAP CHANGER

40

Supply and installation of copper wound transformer step up/ step down, outdoor type complete filled with oil, with standard fittings and foundation, HT 33 KV, secondary 11 KV, 3 phase, with OFF load tap changing , all as per IS: 2026 of capacity up to 1000 KVA

KVA 2,285

41 -- do -- but of capacity above 1000 KVA and upto 1600KVA

KVA 2,042


KVA 1,735


KVA 1,672


KVA 1,672

TRANSFORMER 33 KV/11K V WITH “ON LOAD” TAP CHANGER

45

Supply and installation of copper wound transformer step up/ step down, outdoor type complete filled with oil, with standard fittings and foundation, HT 33 KV, secondary 11 KV, 3 phase, with ON load tap changing , all as per IS: 2026 of capacity up to 2500 KVA

KVA 2,031


KVA 2,000


KVA 1,937

48 -- do -- but of capacity above 7500 KVA KVA 1,789

Note: Item No 31-48 Cost of RCC Foundation for Transformer and Cattle fencing (1.5m high) around is included in above rates.

HT SWITCH GEAR

VACUUM CIRCUIT BREAKER

(INDOOR)

49

Supply and installation of HT 11 KV, 3 phase, 50 Hz totally enclosed metal clad switchgear complete with Vacuum circuit breaker having rupturing capacity 250 MVA, overload and earth fault protection, ammeter, voltmeter and of rating upto 400 Amp

Each 5,98,321

50 -- do -- but rupturing capacity 350 MVA of rating upto 630 Amp

Each 7,10,543

51 -- do -- but of 800 Amp capacity Each 7,61,464


Page 12 of 117





(OUTDOOR)

55

Supply and installation of HT 11 KV, 3 phase, 50 cycles totally enclosed metal clad switchgear complete with Vacuum circuit breaker having rupturing capacity upto 250 MVA, overload and earth fault protection, ammeter, voltmeter and of rating upto 400 Amp

Each 9,09,150


Each 10,04,370

SF6 CIRCUIT BREAKER

(INDOOR)

57

Supply and installation of HT 11 KV ,3 phase, 50 cycles totally enclosed metal clad SF6 switchgear having rupturing capacity upto 250 MVA, overload and earth fault protection, ammeter, voltmeter and of rating upto 400 Amp

Each 9,55,152


Each 10,56,212

59

Supply and installation of HT 33 KV, 3 phase, 50 cycles totally enclosed metal clad SF6 switchgear having rupturing capacity upto 250 MVA, overload and earth fault protection, ammeter, voltmeter and of rating upto 400 Amp

Each 14,62,030


Each 15,18,717

(OUTDOOR)

61 Supply and installation of Ring main unit one incoming two outgoing SF6 filled load break switch each of 11 KV ,630 Amp

Each 11,26,569

62

Supply and installation of HT 11 KV, 3 phase, 50 cycles, totally enclosed metal clad SF6 Switchgear having Rupturing capacity upto 250 MVA, overload and earth fault protection, ammeter, voltmeter and of rating upto 400 Amp

Each 11,66,858


Each 13,56,007


Page 13 of 117


64

Supply and installation of HT 33 KV ,3 phase, 50 cycles totally enclosed metal clad SF6 Switchgear having Rupturing capacity upto 250 MVA, overload and earth fault protection, ammeter, voltmeter and of rating upto 400 Amp

Each 16,04,426


Each 16,83,247

Note FOR CTs and PTs : add prices from item No. 66 to 73 in relevant item of switchgear

HT CTs & PTs

66 Supply and installation of 11 KV, single phase, out door oil cooled CT of ratio 400/5-5 Amp, class 1.0 / 5P10, burden 15 VA

Set of 3 1,01,198

67 -- do -- but for 33 KV Set of 3 1,46,671

68

Supply and installation of 11 KV single phase out door oil cooled PT of ratio 11 KV/rt3/110 V/rt3/110V/rt3,Class 0.5-3, Burden 50 VA – 50 VA

Set of 3 95,199


70 Supply and installation of 11 KV single phase in door resin cast CT of ratio 400/5-5A class 1.0/ 5P10,burden 15VA – 15 VA

Set of 3 53,345

71 -- do -- but for 33 KV voltage Set of 3 1,21,343

72

Supply and installation of 11 KV single phase in door resin cast PT of ratio 11 KV/rt3/110 V/rt3/110V/rt3,Class 0.5-3, Burden 50 VA – 50 VA

Set of 3 73,193


COMPACT SUB STATION(CSS)

74

Supply and Installation of 11 KV Compact Sub Station with non extensible RMU consisting of 1 No manually operated 11 KV/630 Amps VCB in SF6 insulated stainless enclosure,HT Cable/Bus bar ,1 No transformer 100 KVA,11KV/433 CRT dry type & associated LT devices(ACB/MCCB/bus bar/Cable)

Each 13,36,384

75 .--do-- but transformer of 315 KVA Each 18,89,250



Page 14 of 117







Note: CSS rate are inclusive of foundation and plinth

LOAD BREAK SWITCH

82 Supply and Installation of11 KV, 630 Amp Load break switch with earth switch

Each 1,57,642

83 Supply and Installation of11 KV, 630 Amp Load break switch with 200 Amp DO set and earth switch

Each 2,04,935

GANG OPERATED AIR BREAK SWITCHES (GOD)

84

Supply and fix HT 11 KV, out door type gang operated air-break switch suitable for horizontal or vertical mounting fixed type complete with 9 insulators of rating upto 200 Amps

Each 26,355

85 -do- but 400 Amps Each 27,889


87

Supply and fix HT 11 KV out door type gang operated air-break switch suitable for horizontal or vertical mounting rotating type complete with 9 insulators of rating upto 200 Amps

Each 30,608


89

Supply and fix HT 11 KV out door type gang operated air-break switch suitable for horizontal or vertical mounting rotating type complete with drop out fuse having 12 insulators of rating upto 200 Amps

Each 44,299


91

Supply and fix HT 33 KV out door type gang operated air-break switch suitable for horizontal or vertical mounting fixed type complete with 9 insulators of rating upto 200 Amps

Each 62,264


93

Supply and fix HT 33 KV out door gang operated air-break switch 9 insulator rocking type horizontal mounting of 200/400 Amps rating

Each 77,637


Page 15 of 117


94

Supply and fix HT 33 KV out door type gang operated air-break switch suitable for horizontal or vertical mounting fixed type complete with 9 insulators and with earth switch upto 200/400 Amps

Each 82,345

Note:— Cost of GOD includes cost of GI pipe required for operation

Rubber Mat and Hand Glove

95 Rubber mat of 1 meter x 2 meter x 10 mm Each 2,899

96 Rubber mat of 1 meter x 2 meter x 19 mm Each 5,375

97 Electric rubber hand gloves 11 KV Each 900

98 Electric rubber hand gloves 33 KV Each 2,169

LT SWITCH GEAR

99

Supply & fix LT switch gear 440 Volts 3 phase, 4 wire 50 cycles, cubicle or truck type complete with air circuit breaker, overload protection, no-volt release with necessary CTs,meter and cable boxes of rating upto 800 Amps

Each 2,71,716

100 -do- but of rating 1000 Amps Each 2,84,581



103

Supply and fix LT synchronizing panel complete with synchroscope, voltmeter, frequency meter load sharing relay and other accessories and complete with internal wiring up to 160 KVA

Each 61,238

104 -do- but exceeding 160 KVA Each 76,388

COMPACT AIR INSULATED RISING MAINS

(ALUMINIUM BUS BAR)

105

Supply and fix compact air insulated rising main with aluminium busbar 125 Amps,breaking capacity of 35 KA and IP 54 protection

RM 15,130

106

Supply and fix compact air insulated rising main with aluminium busbar 200 Amp,breaking capacity of 35 KA and IP 54 protection

RM 18,039

107


RM 19,320


Page 16 of 117


108

Supply and fix compact air insulated rising main with aluminium busbar 400 Amps having, breaking capacity of 35 KA and IP 54 protection

RM 20,483

109


RM 22,695

110


RM 24,673

111


RM 33,751

112


RM 42,130

113


RM 45,738

(COPPER BUS BAR)

114

Supply and fix compact air insulated rising main with copper busbar 125 Amps,breaking capacity of 35 KA and IP 54 protection

RM 20,483

115


RM 20,483

116


RM 28,281

117


RM 29,445


Page 17 of 117


118

Supply and fix compact air insulated rising main with copper busbar 500 Amps ,breaking capacity of 35 KA and IP 54 protection

RM 33,634

119


RM 38,639

120


RM 54,699

121

Supply and fix compact air insulated rising main with copper busbar 1000 Amps ,breaking capacity of 35 KA and IP 54 protection

RM 70,527

122


RM 80,070

Note: Item No 105-122 Rates include cost of 4P MCCBs of suitable capacity,separators,flexible joints,tap off boxes,end feed units,earthing etc.

COMPACT AIR INSULATED BUS TRUNKING

(ALUMINIUM BUS BAR)

123

Supply and fix compact air insulated bus bar trunking system with aluminium busbar 630 Amps, 50 KA breaking capacity,IP 54 protection

RM 11,638

124

Supply and fix compact air insulated bus bar trunking system with aluminium busbar 800 Amps,50 KA breaking capacity,IP 54 protection

RM 15,130

125


RM 18,039

126


RM 21,531

(COPPER BUS BAR)


Page 18 of 117


127

Supply and fix compact air insulated bus bar trunking system with copper busbar 630 Amps,50 KA breaking capacity,IP 54 protection

RM 28,281

128


RM 36,893

129


RM 46,669

130


RM 53,768

SANDWICH TYPE BUS TRUNKING

(ALUMINIUM BUS BAR)

131 Supply and fix sandwich type bus trunking system with aluminium busbar 630 Amps,50 KA breaking capacity,IP 54 protection

RM 13,035

132 Supply and fix sandwich type bus trunking system with aluminium busbar 800 Amps,50 KA breaking capacity,IP 54 protection

RM 15,828

133

Supply and fix sandwich type bus trunking system with aluminium busbar 1000 Amps,50 KA breaking capacity,IP 54 protection

RM 17,807

134


RM 20,367

135


RM 25,488

136


RM 29,910

(COPPER BUS BAR)


Page 19 of 117


137 Supply and fix sandwich type bus trunking system with copper busbar 630 Amps,50 KA breaking capacity,IP 54 protection

RM 36,660


RM 43,876


RM 58,772


RM 78,557


RM 91,359


RM 1,24,062

NOTE: Item No 123-142 Rates include cost of separators,flexible joints,tap off boxes,end feed units,earthing etc.

PLUG IN BOXES FOR RISING MAIN/ BUS BAR TRUNKING TO BRANCH OUT CONNECTION

143 Supply and fix 4 pole plug in box 100 Amp with MCCB 35/50 KA

Each 55,651

144 Supply and fix 4 pole plug in box 250 Amp with MCCB 35/50KA

Each 1,04,023


Each 1,10,477


Each 1,24,294


Each 1,82,527


Each 2,92,823


Page 20 of 117


POWER FACTOR IMPROVEMENT CAPACITOR Note:— To decide type of capacitor to be used, first find out percentage of non linear load in the system as worked out below and then select the type of capacitor as given in table:—. Example Calculation for percentage non linear loads TRANSFORMER CAPACITY --- 1000 KVA UPS LOAD --- 10 KVA AC DRIVE --- 50 KVA WELDING LOAD — 40 KVA TOTAL NON LINEAR LOAD --- 100 KVA PERCENTAGE NON LINEAR LOAD = 100/1000=10% PERMISSIBLE LOADS Type of Capacitor Permissible percentage (Non linear loads) MPP-S 10%, MPP-H 15% , MPP-XL 20%, FILTER REACTOR + MD-XL CAPACITOR Above 20% & upto 50%

MPP-H CAPACITOR

149

Supply and fix capacitor metalized poly propylene heavy duty (MPP-H) for 3 phase ,440 V, 50 Hz System for permissible non- linear load 15% of 5 KVAR capacity.

Each 3,069

150 -- Do -- but of 7.5 KVAR capacity Each 4,307

151 -- Do -- but of 10 KVAR capacity Each 5,460





156 -- Do -- but of 40 (20 x 2) KVAR capacity Each 20,018





161 -- Do -- but of 100 ( 25 x 4) KVAR capacity Each 50,478

APFC PANEL WITH MPP-H CAPACITOR AND MCCB AS INCOMER

162 Supply and install 100 KVAR with 5 steps (50 + 25 + 15 + 5 + 5)

Each 4,96,869

163 125 KVAR with 5 steps (2x12.5 + 2x25 + 50) Each 5,61,925


Page 21 of 117


164 150 KVAR with 6 steps (2x12.5 + 3x25 + 50)

Each 6,35,763

165 175 KVAR with 6 steps (2x12.5 + 2x25 + 2x50)

Each 6,91,181


Each 7,74,636

167 225 KVAR with 6 steps (2x12.5 + 4x50) Each 7,83,069

168 250 KVAR with 6 steps (2x25 + 4x50) Each 8,90,688

169 275 KVAR with 6 steps (1x100 + 3x50 + 2x12.5)

Each 9,82,681

170 300 KVAR with 6 steps (1x100 + 3x50 + 2x25)

Each 10,31,593


Each 12,28,656


Each 14,11,150


Each 15,38,914

CAPACITOR MPP-S

174

Supply and fix capacitor metalized poly propylene Type — S (MPP—S) for 3 phase , 440 V,50 Hz System for permissible non- linear load 10% of capacity 5 KVAR

Each 2,296

175 -- do -- but of 7.5 KVAR capacity Each 3,143

176 -- do -- but of 10 KVAR capacity Each 3,926

177 -- do-- but of 15 KVAR capacity Each 5,724

178 -- do-- but of capacity 20 KVAR Each 7,396



181 -- do -- but of 40 (20 x 2) KVAR capacity Each 14,611

182 -- do -- but of 50 (25 x 2) KVAR capacity Each 18,209

183 -- do-- but of 60 (20 x 3) KVAR capacity Each 21,171



186 -- do-- but of 100 ( 25 x 4) KVAR capacity Each 36,427

CAPACITOR MD—XL

187

Supply and fix MD—XL Double metalized paper (Extra Low Loss) Capacitor for 3 phase, 440 V, 50 Hz system for permissible non- leaner load 20% of capacity 5 KVAR

Each 4,497

188 -- do-- but of 7.5 KVAR capacity Each 6,444




Page 22 of 117










199 -- do-- but of 100 ( 25 x 4) KVAR capacity Each 80,832

APFC PANEL WITH MD-XL CAPACITOR AND MCCB AS INCOMER

200 Supply and install 100 KVAR with 5 steps (50 + 25 + 15 + 5 + 5)

Each 5,83,657


Each 6,24,443


Each 7,18,055


Each 7,76,266


Each 8,32,541

205 225 KVAR with 6 steps (2x12.5 + 4x50) Each 8,80,415

206 250 KVAR with 6 steps (2x25 + 4x50) Each 9,40,086

207 275 KVAR with 6 steps (1x100 + 3x50 + 2x12.5)

Each 9,95,303


Each 10,37,793


Each 12,44,198


Each 14,02,411


Each 15,12,814

HT 11 KV CAPACITOR

212

Supply and fix power factor improvement single phase static 12 KV capacitor with manual control up to 60 KVAR (180 KVAR in three phase)

KVAR 371

213 -- do -- but exceeding 60 KVAR KVAR 360

LT SWITCHES

(SUITABLE FOR EXTERNAL MOUNTING)


Page 23 of 117


214

Supply and fix switch with sheet steel enclosure 500 V, 3 phase with HRC fuses complete with Neutral link of capacity 32 Amps.

Each 4,412

215 -- do -- but of capacity 63 Amps Each 5,312

216 -- do -- - but of capacity 100 Amps Each 8,803







LT SWITCHES

SWITCH FUSE UNIT SUITABLE FOR INTERNAL MOUNTING IN PANEL

223

Supply and fix switch fuse unit TPN 500 Volts, 3 phase with HRC fuses suitable for interior mounting in panel of capacity 32 Amp .

Each 2,550

224 -- do -- but of capacity 63 Amps TPN Each 3,249





RESIDUAL CURRENT CIRCUIT BREAKER (RCCB)

229 Supply and fix RCCB of 2 pole , 25 Amp rating with sensitivity of 30 mA suitable for 240 Volts .

Each 3,323

230 -- do -- but for 40 Amp Each 3,587


232 Supply and fix RCCB of 4 pole , 25 Amp rating with sensitivity of 30 mA suitable for 415 Volts

Each 4,275



RCCB WITH OVER LOAD AND SHORT CIRCUIT (RCCB+MCB)

235 Supply and fix RCCB with MCB of 2 pole , 6 Amp rating with sensitivity of 30 mA suitable for 240 Volts

Each 3,957





Page 24 of 117


239 -- do -- but for 25Amp Each 3,915



MOULDED CASE CIRCUIT BREAKER (MCCB)

WITH THERMAL BASED RELEASE 3 POLE

242 Supply and fix 3 Pole MCCB 32 to 100 Amp, 50 Hz, 415 V with rupturing capacity 10 KA.

Each 2,772

243 3 Pole MCCB 12 to 63 Amp, 50 Hz, 415 V with rupturing capacity 25 KA

Each 6,137


Each 6,380

245 3 Pole MCCB 100 to 125 Amp, 50 Hz, 415 V with rupturing capacity 35 KA.

Each 9,480

246 3 Pole MCCB 125 to160 Amp, 50 Hz, 415 V with rupturing capacity 35 KA.

Each 11,850


Each 15,595


Each 18,717

4 POLE MCCB

249 Supply and fix 4 Pole MCCB 12 to 63 Amp, 50 Hz, 415 V with rupturing capacity 25 KA

Each 7,576


Each 7,998


Each 11,882


Each 14,961


Each 19,531


Each 23,774


Each 39,411


Each 33,148


Each 39,474

HIGH BREAKING CAPACITY MCCB


Page 25 of 117



Each 9,371

259 Supply and fix 3 Pole MCCB 125 to 160 Amp, 50 Hz 415 V with rupturing capacity 50 KA

Each 11,053

260 Supply and fix 3 Pole MCCB 160 to 200 Amp, 50 Hz ,415 V with rupturing capacity 50 KA

Each 13,040

261 Supply and fix 3 Pole MCCB 200 to 250 Amp 50 Hz 415 V with rupturing capacity 50 KA

Each 15,846


Each 28,609


Each 26,302


Each 26,715

265 Supply and fix 4 Pole MCCB 160 to 200 Amp,50 Hz, 415 V with rupturing capacity 50 KA

Each 27,255


Each 28,143


Each 37,538


Each 37,538


Each 37,538


Each 49,928

MCCB WITH MICROPROCESSOR BASED RELEASE

271 Supply and fix 3 Pole MCCB 63 Amp ,50Hz, 415 V with rupturing capacity 35 KA

Each 14,992


Page 26 of 117



Each 20,547


Each 26,239

274 Supply and fix 3 Pole MCCB 400 Amp ,50Hz ,415 V with rupturing capacity 35 KA

Each 31,984


Each 35,570


Each 21,086


Each 26,842

278 4 Pole MCCB 250 Amp ,50Hz, 415 V with rupturing capacity 35 KA

Each 33,126

279 Supply and fix4 Pole MCCB 400 Amp ,50Hz ,415 V with rupturing capacity 35 KA

Each 39,919


Each 48,986

ON LOAD CHANGE OVER SWITCH TPN VERSION

281 Supply and fix ON LOAD change over switch 415V in sheet metal enclosures 4 pole of capacity 63 Amps.

Each 7,999

282 - do -- but of capacity 125 Amps. Each 13,765

283 -- do -- but of capacity 160 Amps. Each 15,669






INDUSTRIAL WALL MOUNTED PLUG SOCKET SUITABLE FOR IP44 DEGREE OF PROTECTION

289 Supply and fix 16 Amps rating 2P+E Each 900

290 -- do -- but 3P+E Each 1,016

291 -- do -- but 3P+N+E Each 1,016

292 Supply and fix 32 Amps rating 2P+E Each 1,080

293 -- do -- but 3P+E Each 1,207

294 -- do -- but 3P+N+E Each 1,207

INDUSTRIAL WALL MOUNTED PLUG SOCKET SUITABLE FOR IP67 DEGREE OF PROTECTION


296 -- Do -- but 3P+E Each 1,418

297 -- Do -- but 3P+N+E Each 1,450



Page 27 of 117


299 -- Do -- but 3P+E Each 1,778

300 -- Do -- but 3P+N+E Each 2,106

INDUSTRIAL PANEL MOUNTED PLUG SOCKET SUITABLE FOR IP44 DEGREE OF PROTECTION


302 -- do -- but 3P+E Each 953

303 -- do -- but 3P+N+E Each 963


305 -- do -- but 3P+E Each 1,080

306 -- do -- but 3P+N+E Each 1,080

INDUSTRIAL PANEL MOUNTED PLUG SOCKET SUITABLE FOR IP67 DEGREE OF PROTECTION


308 -- do -- but 3P+E Each 1,164

309 -- do -- but 3P+N+E Each 1,164


311 -- do -- but 3P+E Each 1,365

312 -- do -- but 3P+N+E Each 1,397

METAL PLUG AND SOCKET WITH MCB AND STEEL ENCLOSURE

313 Supply and fix 20 Amps SPN MCB metallic P&S

Each 1,418

314 Supply and fix 20 Amps TP MCB metallic P&S

Each 3,111

315 Supply and fix 32 Amps TP MCB metallic P&S

Each 3,651

316 Supply and fix 20 Amps SPN AC Box Each 1,408

VOLTAGE STABILISER

317

Supply and fix Voltage stabilizer for automatic operation, single phase naturally air cooled indoor type & designed for input variation between 170 V to 250 V with output voltage stabilized at 230 V with accuracy of ± 2.5% and of capacity 0 .5 KVA

Each 3,196

318 -- do -- but of capacity 1.0 KVA Each 6,454





SERVO CONTROLLED OIL COOLED STABILIZER


Page 28 of 117


323

Supply and fix Voltage stabilizer for automatic operation, three phase, naturally oil cooled, indoor type & designed for input variation between 300 V to 480 V with output voltage stabilized at 415 with accuracy ± 2.5% and speed of correction 8 Volts per second and of capacity 10 KVA

Each 74,367

324 -- do -- but of capacity 15 KVA Each 82,271

325 -- do -- but of capacity 20 KVA Each 95,813

326 -- do -- but of capacity 25 KVA Each 1,13,164














UPS

340 Supply and fix UPS for 30 min back up single phase AC input 160 to 260 V and out put 230 ± 1% of capacity 1KVA

Each 33,931

341 -- do-- but of capacity 2 KVA Each 65,501

342 -- do-- but of capacity 3 KVA Each 78,578

343 -- do-- but of capacity 5 KVA Each 1,26,474

344 Supply and fix UPS for 30 min back up three phase AC input 300 to 450V and out put 415 V ± 1% of capacity 7.5 KVA

Each 4,62,812





349

Supply and fix UPS for 30 min back up three phase AC input 300 to 450V and out put single phase AC out put Voltage 230 V ± 1% of capacity 7.5 KVA

Each 2,16,700




Page 29 of 117


352 -do – but of capacity 20 KVA Each 3,55,266

353 -do – but of capacity 30 KVA Each 7,24,889

ARMOURED XLPE CABLES (LT) 1.1 KV GRADE

354

Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 6.0 sq mm 2 core

RM 318

355 do-- but size 10 sq mm 2 core RM 350

356 -- do-- but size 16 sq mm 2 core RM 392


358 - do-- but size 35 sq mm 2 core RM 445





363 -- do-- but size 35 sq mm 3½ core RM 593



366 -- do-- but size 95 sq mm 3½ core RM 1,069




370 -- do-- but size 240 sq 3½ core RM 2,307




Note: Item No 354-373 Rate of under ground cable includes earth Work, sand cushioning, brick or PCC covering, light Grade GI tubing where necessary,testing etc.

ARMOURED XLPE CABLE 11 KV GRADE

374

Supply, laying & testing cable XLPE insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty)with stranded aluminium conductor, 11000 volts grade, of size 3 core 35 sq mm.

RM 1,323

375 - do-- but of size 50 sq mm RM 1,461

376 -- do-- but of size 70 sq mm RM 1,662



Page 30 of 117








Note: Item No 374-383 Rate of under ground cable includes earth Work, sand cushioning, brick or PCC/RCC covering, light Grade GI tubing where necessary,testing etc.

ARMOURED XLPE CABLE 33 KV GRADE

384

Supply, laying & testing cable XLPE insulated screened PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) with stranded aluminium conductor, 33000 volts grade, of size 3 core 95 sq mm

RM 3,270






Note:Item No 384-389 Rate of under ground cable includes earth Work, sand cushioning, brick or PCC/RCC covering, light Grade GI tubing where necessary,testing etc.

CONTROL CABLE COPPER CONDUCTOR

390

Supply, laying & testing PVC insulated, PVC sheathed cable galvanized steel strip or wire armoured, electric control cables (Heavy duty) with stranded copper conductor of size 1.5 sq mm ,2 core, 1100 Volts grade.

RM 318

391 do-- but size 2 Core ,2.5 ,Sq mm RM 371

392 -- do-- but size 2 Core, 4 Sq mm RM 434

393 -- do-- but size 3 Core, 1.5 Sq mm RM 360

394 -- do-- but size 3 Core ,2.5 Sq mm RM 424

395 -- do-- but size 3 Core ,4 Sq mm RM 508



398 -- do-- but size 4 Core, 4 Sq mm RM 604






Page 31 of 117


CABLE JOINTING KIT

403

Supply and fix cable jointing kit for 1.1 KV grade cable for straight through joint complete with Jointing material heat Shrink type and accessories suitable for 3 ½ / 4 core XLPE, armoured, Al conductor cable of size 25 to 50 sqmm,Indoor/Outdoor type

Each 5,100

404 -- do-- but for cable of size 70 to 95 sq mm. Each 7,385

405 -- do-- but for cable of size 120 to 150 sq mm.

Each 7,385

406 -- do-- but for cable of size 185 to 240 sq mm

Each 12,972


Each 13,670

408

Supply and fix cable jointing kit for 11 KV grade cable for in door termination, heat shrink type, joint complete with jointing material and accessories suitable for3 core XLPE, armoured, Al conductor cable of size 16 sqmm to 50 sqmm

Each 11,374


Each 13,501


Each 15,744


Each 16,421

412 -- do-- but for cable of size 400 sq mm Each 17,468

413

Supply and fix cable jointing kit for 11 KV grade cable for outdoor termination , heat shrink type, joint complete with jointing material and accessories suitable for 3 core XLPE, armoured, Al conductor cable of size 16 sqmm to 50 sqmm

Each 17,267


Each 19,044


Each 20,229


Each 22,705

417 -- do-- but for cable of size 400 sq mm Each 23,784


Page 32 of 117


418

Supply and fix cable jointing kit for 33 KV grade cable for in door termination heat shrink type joint complete with jointing material and accessories suitable for 3 core XLPE, armoured ,Al conductor cable of size 25 sqmm to 50 sqmm

Each 21,362

419 -- do-- but for cable of size 70 to 95 sq mm. Each 22,494


Each 32,365


Each 37,327

422

Supply and fix cable jointing kit for 33 KV grade cable for outdoor termination heat shrink type joint complete with jointing material and accessories suitable for 3 core XLPE, armoured, Al conductor cable of size 25 sqmm to 50 sqmm

Each 28,344

423 -- do-- but for cable of size 70 to 95 sq mm Each 34,957


Each 44,585


Each 58,064

426

Supply and fix cable jointing kit for 11 KV grade cable for indoor termination cold shrink type joint complete with jointing material and accessories suitable for 3 core XLPE, armoured, Al conductor cable of size 50 sqmm to 95 sqmm

Each 6,645


Each 6,941

428 -- do -- but for cable of size 240 to 400 sq mm.

Each 9,004

429

Supply and fix cable jointing kit for 11 KV grade cable for out door termination cold shrink type joint complete with jointing material and accessories suitable for 3 core XLPE, armoured, Al conductor cable of size 50 Sqmm to 95 Sqmm

Each 11,099


Each 11,437


Each 14,125


Page 33 of 117


432

Supply and fix cable jointing kit for 11 KV grade cable for straight through cold shrink type joint complete with jointing material and accessories suitable for 3 core XLPE, armoured, Al conductor cable of size 50 Sqmm to 95 sqmm, Indoor/Outdoor type

Each 19,171


Each 20,505

434 -- Do -- but for cable of size 240 to 400 sq mm

Each 30,058

435

Supply and fix cable jointing kit for 33 KV grade cable for indoor termination cold shrink type joint complete with jointing material and accessories suitable for 3 core XLPE armoured Al conductor cable of size 50 Sqmm to 70 Sqmm

Each 12,474


Each 16,347


Each 16,526


Each 16,738

439

Supply and fix cable jointing kit for 33 KV grade cable for outdoor termination cold shrink type joint complete with jointing material and accessories suitable for 3 core XLPE armoured Al conductor cable of size 50 Sqmm to 120 Sqmm

Each 17,944


Each 18,463


Each 19,108

442

Supply and fix cable jointing kit for 33 KV grade cable for straight through heat shrink type joint complete with jointing material and accessories suitable for 3 core XLPE armoured Al conductor cable of size 50 Sqmm to 120 Sqmm, Indoor/Outdoor type

Each 66,337


Each 1,16,412


Each 1,29,309

CABLE GLAND


Page 34 of 117


445

Supply and fix double compression copper stain less steel gland for fixing armoured cable in panel of size 2 core 6 Sq mm to 16 sq mm size

Each 223


Each 392

447 -- do-- but for cable of size 4 core 6 to 16 sq mm above.

Each 297

448 -- do-- but for cable of size 4 core 25 to 35 sq mm Above.

Each 392

449 -- do-- but for cable of size 3½ core 50 sq mm to 70 sq mm above.

Each 540

450 -- do-- but for cable of size 3.5 core 95 sq mm to 120 sqmm

Each 678

451 -- do-- but for cable of size 3.5 core 150 sq mm

Each 921

452 -- do-- but for cable of size 3.5 core 240 sq mm to 300 sq mm above

Each 1,418

453 -- do-- but for cable of size 3 .5 core 400 sq mm

Each 1,767

AERIAL BUNCHED CABLE (ABC)

LT ABC ON PCC POLES

454

Supply and fix LT overhead lines on 9 meter PCC poles with XLPE insulated AB cable 3-core X 50 sq mm + 1-core x 35 sq mm

RM 615

455 do—but of size 3-core X 70 sq mm + 1-core X 50 sq mm

RM 713


RM 815

457 do—but of size 3-core X 120 sq mm X 1-core X 70 sq mm

RM 880


RM 964


RM 1,260


RM 1,500

11 KV HT ABC ON PCC POLES

461 Supply and fix HT overhead lines on 11 meter PCC poles with XLPE insulated AB cable 3-core X 70 sq mm + 1 x 50 sq mm

RM 1,196


Page 35 of 117


462 do—but of size 3-core X 95 sq mm + 1 X 70 sq mm

RM 1,347


RM 1,824

LT ABC ON STEEL POLES

464 Supply and fix LT overhead lines on 9 meter steel poles with XLPE insulated AB cable 3-core X 50 sq mm + 1 x 35 sq mm.

RM 1,062


RM 1,159


RM 1,262


RM 1,327


RM 1,410


RM 1,706


RM 1,946

11 KV HT ABC ON STEEL POLES

471 Supply and fix HT overhead lines on 11 meter steel poles with XLPE insulated AB cable 3-core X 70 sq mm + 1 x 50 sq mm.

RM 1,855


RM 2,006


RM 2,494

Note:Item No 454-473 Rates include cost of PCC/steel poles their foundation, coping & earthing. Pole spacing is considered as 30 Meter and 50 Meter respectively for LT and HT

LT ABC ON EXISTING POLES

474 Supply and fix LT overhead lines on existing poles with XLPE insulated AB cable 3-core X 50 sq mm + 1 x 35 sq mm.

RM 224


RM 321


RM 424


RM 489


RM 572


Page 36 of 117



RM 868


RM 1,108

11 KV HT ABC ON EXISTING POLES

481 Supply and fix HT overhead lines on existing poles with XLPE insulated AB cable 3-core X 70 sq mm + 1 x 50 sq mm.

RM 693


RM 844


RM 1,332

LT OVER HEAD LINE ON PCC POLE WITH ACSR CONDUCTOR

484

Supply and fix LT OH lines on 9 meter PCC poles with Continuous GI earth wire incl earthing of poles, cross arms, insulators etc and ACSR conductors of size 2 of 6/1 x 2.11 mm (Squirrel).

RM 422

485 do-- but of size 2 of 6/1 x 2.59 mm (Weasel) RM 472

486 do-- but of size 4 of 6/1 x 2.11 mm (Squirrel) RM 492

487 do-- but of size 3 of 6/1 x 2.59 mm (Weasel), 1 of 6/1 x 2.11mm (Squirrel)

RM 519

488 do-- but of size 3 of 6/1 x 3.00 mm (Ferret),1 of 6/1 x 2.59 mm (Weasel)

RM 557

489 do-- but of size 3 of 6/1 x 3.50 mm (Rabbit),1 of 6/1 x 2.59 mm (Weasel)

RM 586

490 do-- but of size 3 of 6/1 x 3.66 mm (Mink),1 of 6/1 x 2.59 mm (Weasel)

RM 623

491 do-- but of size 3 of 6/1 x 3.99 mm (Beaver), 1 of 6/1 x 3.00mm (Ferret)

RM 663

492 do-- but of size 3 of 6/1 x 4.22 mm (Otter),1 of 6/1 x 3.99 mm (Beaver)

RM 718

493 do-- but of size 3 of 6/1 x 4.50 mm (Cat), 1 of 6/1 x 3.99 mm (Beaver)

RM 750

494 do-- but of size 3 of 6/5.28 +7/1.76mm(Leopard), 1 of 6/1 x 3.99 mm (Beaver)

RM 824

495 do-- but of size 3 of 26/2.54 +7/1.90mm(Coyota),1 of 6/1 x 3.99 mm (Beaver)

RM 843

496 do-- but of size 3 of 30/7x3.00 mm (Panther),1 of 6/1 x 4.72 mm (Dog)

RM 1,151


Page 37 of 117


NOTE : Item No 484-496 Rates are including cost of PCC poles their foundation and coping. Spacing considered as 30 Meter

LT OVER HEAD LINE ON STEEL TUBULAR POLE WITH ACSR CONDUCTOR

497

Supply and fix LT OH lines on 9 meter Steel poles with Continuous GI earth wire incl earthing of poles cross arms, insulators etc poles and ACSR conductors of size 2 of 6/1 x 2.11 mm (Squirrel).

RM 744

498 do-- but of size 2 of 6/1 x 2.59 mm (Weasel) RM 795

499 do-- but of size 4 of 6/1 x 2.11 mm (Squirrel) RM 816

500 do-- but of size 3 of 6/1 x 2.59 mm (Weasel),1 of 6/1 x 2.11mm (Squirrel)

RM 843


RM 880

502 do-- but of size 3 of 6/1 x 3.50 mm (Rabbit), 1 of 6/1 x 2.59 mm (Weasel)

RM 908

503 do-- but of size 3 of 6/1 x 3.66 mm (Mink), 1 of 6/1 x 2.59 mm (Weasel)

RM 945

504 do-- but of size 3 of 6/1 x 3.99 mm (Beaver),1 of 6/1 x 3.00mm (Ferret)

RM 987


RM 1,041

506 do-- but of size 3 of 6/1 x 4.50 mm (cat) ,1 of 6/1 x 3.99 mm (Beaver)

RM 1,073

507 do-- but of size 3 of 6/5.28 +7/1.76mm(Leopard),1 of 6/1 x 3.99 mm (Beaver)

RM 1,146

508 do-- but of size 3 of 26/2.54 +7/1.90mm(Coyota),1of 6/1 x 3.99 mm (Beaver)

RM 1,165

509 do-- but of size 3 of 30/7x3.00 mm (Panther),1 of 6/1 x 4.72 mm (Dog)

RM 1,473

NOTE :Item No 497-509 Rates are including cost of steel poles, their foundation and coping. Spacing considered as 30 Meter

LT OVER HEAD LINES ON EXISTING POLES

510 Supply and fix LT OH lines on existing poles with ACSR conductors size 2 of 6/1x2.11mm(Squirrel).

RM 67

511 do -- but of size 2 of 6/1 x 2.59 mm (Weasel)

RM 84

512 do-- but of size 4 of 6/1 x 2.11 mm (Squirrel)

RM 105


Page 38 of 117


513 do-- but of size 3 of 6/1 x 2.59 mm (Weasel),1 of 6/1 x 2.11mm (Squirrel)

RM 132


RM 170

515 do-- but of size 3 of 6/1 x 3.50 mm (Rabbit),1 of 6/1 x 2.59 mm (Weasel)

RM 198

516 do-- but of size 3 of 6/1 x 3.66 mm (Mink),1 of 6/1 x 2.59 mm (Weasel)

RM 234

517 do-- but of size 3 of 6/1 x 3.99 mm (Beaver),1 of 6/1 x 3.00mm (Ferret)

RM 276


RM 331

519 do-- but of size 3 of 6/1 x 4.50 mm (cat) ,1 of 6/1 x 3.99 mm (Beaver)

RM 362

520 do-- but of size 3 of 6/5.28 +7/1.76mm(Leopard),1 of 6/1 x 3.99 mm (Beaver)

RM 435

521 do-- but of size 3 of 26/ 2.54 +7/1.91 mm(Coyota),1 of 6/1 x 3.99 mm (Beaver)

RM 454

HT OH LINES ON PCC POLE WITH ACSR CONDUCTOR

522

Supply and fix HT overhead line of 11KV on 11 meter PCC poles with continuous GI earth wire, including earthing of Poles cross arms, insulators etc and ACSR conductor of sizes 3 of 6/1 x 2.11 mm (Squirrel)

RM 395

523 do-- but size 3 of 6/1x2.59 mm (Weasel) RM 423

524 do-- but size 3 of 6/1x3.00 mm (Ferret) RM 450

525 do-- but size 3 of 6/1x3.50 mm (Rabbit) RM 479

526 do-- but size 3 of 6/1x3.66 mm (Mink) RM 514

527 do-- but size 3 of 6/1x3.99 mm (Beaver) RM 545

528 do-- but size 3 of 6/1x4.22 mm (Otter) RM 571

NOTE : Item No 522-528 Rates are including cost of PCC poles, their foundation and coping .Spacing considered as 50 Meter

HT OH LINES ON STEEL TUBULAR POLE WITH ACSR CONDUCTOR

529

Supply and fix HT overhead line of 11KV on 11 meter steel poles with continuous GI earth wire, including earthing of poles cross arms, insulators etc and ACSRconductor of sizes 3 of 6/1 x 2.11 mm (Squirrel)

RM 677



Page 39 of 117







Note:Item No 529-535 Rates are including cost of steel poles their foundation and coping . Spacing between pole considered is 50 Meter.

HT OVER HEAD LINES ON EXISTING POLES

536 Supply and fix HT OH lines on Existing Poles with ACSR conductor of size3 of 6/1x2.11 mm (Squirrel)

RM 104







4 POLE AND 2 POLE STRUCTURE WITH PCC POLE

543

Supply & erect 4 pole structure on 11 meter PCC Pole,anti-climbing device, PCC foundation & cross arms (Bracings) etc for one incoming and one out going.

Each 90,930

544

Supply & erect 4 pole structure on 11 meter PCC, with anti-climbing device, PCC foundation & cross arms etc for one incoming and two out going.

Each 1,03,001

545

Supply & erect 4 pole structure on 11 meter PCC Pole,anti-climbing device, PCC foundation & cross arms etc for one incoming and three out going.

Each 1,26,070

546 Supply and erect 2 pole structure on 11 meter PCC pole , anti-climbing device, PCC foundation & cross arms etc.

Each 45,548

4 POLE AND 2 POLE STRUCTURE WITH STEEL POLE

547

Supply & erect 4 pole structure on 11 meter steel tubular pole consisting of pole with anti-climbing device, PCC foundation & cross arms etc for one incoming and one out going.

Each 1,58,323


Page 40 of 117


548

Supply & erect 4 pole structure on 11 meter steel tubular pole consisting of pole with anti-climbing device, PCC foundation & cross arms etc for one incoming and two out going.

Each 1,70,392

549

Supply & erect 4 pole structure on 11 meter steel tubular pole consisting of pole with anti-climbing device, PCC foundation & cross arms etc for one incoming and three out going.

Each 1,93,462

550

Supply and erect 2 pole structure on 11 meter steel Tubular pole consisting of anti-climbing device, PCC foundation & cross arms etc.

Each 79,244

Note:Item No 543-550 Cost of 4 & 2 Pole structure only include cost of pole, foundation and steel bracings but does not include cost of Gang Operated device,earthing,LA etc.

LIGHTNING ARRESTORS

551 Supply and fix lightning arrestor HT 11 KV 10 KA station class

set of 3 45,675

552 Supply and fix lightning arrestor HT 33 KV 10 KA station class

set of 3 59,057

EARTHING

553

Earthing of machinery/equipment Installed at power house/substation, using 32 x 6 mm galvanized MS strip and MS galvanized plate of size 600 x 600 x 6 mm ,as earth electrode

Set of 2 earths

14,297

554

Earthing of machinery/equipment Installed at power house/substation, using 25 x 3 mm copper strip and copper plate of size 300 x 300 x 3 mm, as earth electrode.

Set of 2 earths

24,683

555

Earthing for poles & other machinery/equipment using 4 mm GI wire as earthing lead and MS galvanized plate of size 60 cm x 60 cm x 6 mm, as earth electrode.

Each 5,966

SERVICE CONNECTIONS


Page 41 of 117


556

Service connection with 6 sq mm twin core Weather proof aluminium conductor cable Suspended with No.8 SWG GI wire from Pole to service bracket & then to meter Including 40 mm GI pipe service bracket.

Each 2,146

557 -- do -- but with 10 sq mm twin core Weather Proof cable.

Each 2,369

METERS

558

Supply & fix Microprocessor based Single phase electronic temper proof energy meter of rating 10 to 60 Amp with optical communication port, conforming to IS: 13779.

Each 5,271

559

Supply & fix AC single phase static energy meter of accuracy class 1.0, 240 V, 50 Hz with Backlit LCD display of rating 5 - 30 A, (measures and displays KWH ,V, Current I, KW, pf last month history of KWH, MD in KW) with special features like TOD, temper logging, optical communication port display in absence of power with transparent hinge type box.

Each 3,975

560

Supply & fix AC single phase static energy meter of accuracy class 1.0, 240 V 50 Hz with Backlit LCD display of rating 10 - 60 A (measures and displays KWH ,V, Current I, KW, pf last month history of KWH, MD in KW) with special features like TOD, temper logging, optical communication port display in absence of power with transparent hinge type box.

Each 4,138

561

Supply & fix Single phase , two wire ,240 volt , 10- 60 A or less, accuracy class 1.0, IS Markied,single source pre payment meter including CIU & STTD

Each 8,520

562

Supply & fix AC Three phase static energy meter of accuracy class 1.0, 3 X 240 V ,50 Hz with Backlit LCD display of rating 5 - 20 A (suitable for measurement of KWH only)

Each 6,627


Page 42 of 117


563

Supply & fix AC Three phase static energy meter of accuracy class 1.0, 3 X 240 V, 50 Hz with Backlit LCD display of rating 10 - 60 A (suitable for measurement of KWH only)

Each 7,252

564

Supply & fix AC Three phase static energy meter of accuracy class 1.0 ,3 X 240 V ,50 Hz with Backlit LCD display of rating 10 - 60 A (measures and displays KWH ,V, Current I, KW, pf last month history of KWH, MD in KW) with special features like TOD, temper logging, optical communication port display in absence of power with transparent hinge type box.

Each 12,268

565 Supply & fix Trivector meter three phase four wire ,3 x 240 volt , 10-60 Amp class 1.0 with box .

Each 13,183

566 Supply & fix Trivector meter three phase four wire TVM 110 Volt , 1 A/5A class 0.5 with box .

Each 31,440

567 Supply & fix Trivector meter three phase four wire TVM 110 Volt , 1 A/5A ,class 0.2 with box .

Each 63,823

568

Supply & fix Meter reading instruments with suitable software of capacity 16.5 MB to record, reading through optical communication port of any type of meter.

Each 1,26,819

569

Supply & fix Microprocessor based three phase electronic tamper proof energy meter of rating 10 to 60 Amp with optical communication port conforming to IS: 13779.

Each 10,373

570

Supply & fix Microprocessor based three phase electronic tamper proof, CT operated, energy meter for LT supply with optical communication port, accuracy class 0.5 voltage 3 x 240 V, 1/5 A conforming to IS: 13779.

Each 32,736

571

Supply & fix Microprocessor based three phase electronic tamper proof HT energy meter with optical communication port, accuracy class 0.5 rating 3 x 110 V, 1/5 A conforming to IS: 13779.

Each 39,219


Page 43 of 117


572 Supply & fix Digital panel meter for Amp, Volt,KWH, power factor and other parameter flush mounting of size 96 x96 mm

Each 23,605

573 Supply & fix Trivector meter base mounting of class 0.5

Each 40,677

FANS

574 Supply & fix fans ceiling complete with electronic type regulator and accessories 230 V,1200 mm sweep. BEE 5 star rated

Each 3,098

575 Supply & fix fans ceiling complete with electronic type regulator and accessories 230 V , 1400 mm sweep

Each 2,353

576 Supply & fix exhaust fans AC single phase 230/ 240 V of size 300 mm sweep with louver

Each 2,847

577 -- do -- but size 380 mm sweep. Each 3,620



580 Supply & fix exhaust fans AC three phase 415 V of size 380 mm sweep with louver.

Each 4,410

581 .-- do -- but size 450 mm sweep. Each 6,086

582 . -- do -- but size 600 mm sweep. Each 10,444

583 Supply & fix fans table 230 volts single phase oscillating 400 mm sweep.

Each 2,010

584 Supply & fix Air Circulator fans 230 volts single phase oscillating 450 mm sweep suitable for wall mounting.

Each 8,225

585 . -- do – but for 600 mm sweep Each 10,416

586 . -- do – but for 750 mm sweep Each 9,800

TIME SWITCHES

587 Supply and fix time switches 250 V single Phase of 20 Amp rating with contactor fitted inside steel enclosure

Each 5,557

588 Supply and fix time switches 415 V three Phase of 20 Amp rating with contactor fitted inside steel enclosure

Each 8,136

589

Supply and fix time switches astro type (Having longitude and latitude of Indian cities in memory) 250 V single phase of 20 Amp rating with contactor fitted inside steel enclosure.

Each 11,132

LIGHTING


Page 44 of 117


STREET LIGHT/FLOOD LIGHT FITTINGS

590

Supply & fix street light fitting fluorescent lamp type complete with perplex cover, reflector, choke starter, bi-pin holders etc for 1 x 40 Watt fluorescent tube

Each 2,805

591 . -- do -- but for 2 x 40 Watt tubes Each 3,808

592 Supply and fix street light 1 x 28 Watt FTL (T5) IP 43

Each 2,846

593 . -- do -- but for 2 x 28 Watt FTL (T5) IP 43 Each 3,530

594 .--do-- but 1 x36 Watt FTL (T8) IP 43 Each 2,690

595 . -- do -- but for 2 x 36 Watt FTL (T8) IP 43 Each 3,513

596 Supply and fix street light 2 X 14 W (FTL T5) IP65

Each 4,484

597 Supply and fix street light 4 X 14 W (FTL T5) IP. 65

Each 8,561


Each 4,661


Each 8,924

600 Supply and fix CFL street light 1 X 36 W IP. 65

Each 2,457


Each 3,804


Each 8,050

603

Supply & fix street light fitting Mercury vapour lamp type complete with HPMV lamp, reflector, heat resistant glass bowl, choke etc complete in all respect for 80 Watt lamp.

Each 5,274

604 . -- do -- but for 125 Watt lamp Each 5,027

605 -- do -- but for 250 Watt lamp. Each 6,902

606 Supply & fix street light fitting HPSV lamp, ballast, igniter and other accessories for 70 Watt lamp.

Each 6,105

607 -- do -- but for 150 Watt lamp. Each 7,905

608 .-- do -- but for 250 Watt lamp Each 10,944

609 . -- do -- but for 400 Watt lamp. Each 19,483

610 Supply & fix Flood light fitting, complete with switch gear, control gear unit ,lamp and fixing for 400 Watt metal halide (MH)

Each 12,048

611 . -- do -- same as above but 250 Watt MH Each 10,843


Page 45 of 117


LED STREET LIGHTS (Clause of escalation not to applied for LED lights)

612 Supply and fix LED street light 10 W IP 65 Each 3,989

613 Supply and fix LED street light 35/36 W IP 65

Each 11,829


Each 20,081

615 Supply and fix LED street light 100/105/110 W IP 65

Each 31,635

616 Supply and fix LED street light 115/120/125 W IP 65

Each 34,385


Each 35,761

618 Supply and fix LED street light170 W IP 65 Each 48,139

619 Supply and fix LED street light 210 W IP 65 Each 52,266

LED FLOOD LIGHT

620 Supply and fix LED Flood light 35/36/37 W IP 65

Each 11,691

621 Supply and fix LED Flood light 70 W IP 65 Each 18,568





POST TOP LANTERNS

626 Supply and fix post top lantern light fitting for 70 Watt SV lamp complete With all accessories.

Each 6,707

627 . -- do-- but for 80 Watt MV lamp. Each 6,447

628 . -- do-- but for 125 Watt MV lamp. Each 6,381

INDUSTRIAL LIGHT FITTINGS

629

Supply & fix fluorescent light fitting complete with choke, condenser, starter, bi-pin lamp holders and Industrial reflector for 1 x 40 Watt tube.

Each 1,822

630 . -- do-- but for 2 x 40 Watt tubes Each 2,539

BULK HEAD FITTING

631 Supply & fix Bulkhead luminaire for CFL lamps 1x 9 Watt

Each 1,486

632 . -- do-- but for 1 x 13 Watt CFL Each 1,538

INDOOR LIGHT FITTINGS


Page 46 of 117


633

Supply & fix fluorescent light fitting Complete with chokes, condensers, starter,bi-pin holder, diffuser, polystyrene louvers 1 x 20 Watt .

Each 1,301

634 . -- do -- but for 1 x 40 Watt tube. Each 1,461

635

Supply &fix fluorescent light fitting complete with chokes, condensers, starters, bi-holders housed in stove enamelled rectangular box and fitting fitted with polystyrene louvers, end plates suitable for 2 x 20 Watt tube

Each 2,539

636 . -- do -- but for 2 x 40 Watt tube. Each 4,645

637 Supply & fix indoor decorative luminaire 1 X 28 W FTL (T5) IP 43

Each 1,635


Each 3,190

639 Supply & fix indoor decorative luminaire 1 X 36/40 W FTL (T8) IP 43

Each 1,822


Each 3,503

641 Supply & fix fluorescent light fitting slim channel with bi-directional reflector 1 X 28 W FTL (T5) IP 43

Each 2,165


Each 2,821

643 Supply & fix fluorescent light fitting slim channel with bi-directional reflector 1 X 36/40 W FTL (T8) IP 43

Each 2,343


Each 2,861

645 Supply and fix dust/corrosion proof 1 X 28 W FTL (T5) IP 65

Each 4,219

646 . -- do -- but for 2 x 28 Watt Each 5,609

647 . -- do -- but for 1 x 36 Watt FTL (T8) Each 4,397

648 . -- do -- but for 2 x 36 Watt FTL (T8) Each 5,556

LED INDOOR LIGHTS (Clause of escalation not to applied for LED lights)

649 Supply & fix LED tube light along with fixture,16 W

Each 1,376

650 Supply & fix LED tube light along with fixture,18W

Each 1,376


Page 47 of 117


651 Supply & fix LED tube light along with fixture, 20 W

Each 1,376

652 Supply & fix LED tube light along with fixture, 22 W

Each 1,857

653 Supply & fix LED down lighter, 3 W Each 1,307





658 Supply & fix LED down lighter ,6 W Each 6,877


660 Supply & fix LED down lighter 2'x2' , 35 W Each 8,941

661 Supply & fix LED down lighter 2'x2', 40 W Each 11,416

662 Supply & fix LED High bay , 72 W Each 24,758



665 Supply & fix LED bulk head ,10 W Each 2,476

666 Supply & fix LED tube light 20W water proof IP 65

Each 6,864

HIGH MAST LIGHT

667

Supply & installation of Galvanized steel high mast lighting system of 12.5 meter in two section, 3 mm section thickness, top dia 150 mm, bottom dia 340 mm, with 2/3 wire rope system and its accessories. System is suitable for loading 04 nos 50 to 100w LED Lights

Each 5,42,684


Page 48 of 117


668

Supply & installation of Galvanized steel high mast lighting system of 16 meter in two section, 3 mm section thickness, top dia 150 mm, bottom dia 340 mm, with 2/3 wire rope system and its accessories. System is suitable for loading 08 nos 80 to 150w LED lights

Each 7,59,605

669

Galvanized steel high mast lighting system of 20 meter in two section, 3 mm section thickness, top dia 150 mm, bottom dia 340 mm, with 2/3 wire rope system and its accessories. System is suitable for loading 06 nos 200 to 300w LED lights

Each 15,70,981

Note: In HM light, cost of luminaires is to be added separately. Rates are inclusive of cost of foundation

SHADOWLESS LIGHT FITTINGS

670

Supply and fix Shadow less light fitting complete with emergency power unit & battery back up for min 30 minutes (3 KVA), having dome of 810 mm dia, fully counter balanced moveable on ceiling trolley having a minimum longitudinal travel of 1350 mm and axial rotation of 360 deg. The unit to be suitable for operation on 230 V, single phase 50 cycles mains supply. (For Major OT having lux level> 120,000)

Each 4,98,031

671 -- do -- but for standard model suitable Having battery back up of 1 KVA and lux level >70,000

Each 3,64,709

672

Supply and fix Shadow less light fitting complete with emergency power unit & battery back up for min 30 minutes (3 KVA), having dome of 810 mm dia, fully counter balanced and fixed on suspension rod, capable of having axial rotation of 360 deg. The unit to be suitable for minor OT and Capable for operation on 230 V single phase, 50 cycles mains supply having lux level > 70,000.

Each 3,64,709

673 -- do -- but for mobile shadowless light fitting

Each 3,19,864


Page 49 of 117


FLAME PROOF WEATHER PROOF LIGHT FITTINGS

674 Supply and fix Flame proof weather proof fluorescent fixture 1 x 40 W x 4'

Each 19,421

675 Supply and fix Flame proof weather proof fluorescent fixture 2 x 40 W x 4'

Each 37,482

676 Supply and fix Flame proof bulk head fitting 200 W GLS/80 W HPMV/ 125 HPMV

Each 9,135

677 Supply and fix Flame proof bulk head fitting 2 x 26 W CFL

Each 10,202

678 Supply and fix Flame proof bulk head fitting 3 x 26 W CFL

Each 11,151

679 Supply and fix Flame proof - weather proof fitting suitable for 200 W GLS/ 80 W HPMV/125 W HPMV

Each 11,910

680 Supply and fix Flame proof - weather proof flood light fitting suitable for 300 W GLS/ 250 W HPMV/ 150 W metal halide

Each 25,398

681 Supply and fix Flame proof - weather proof flood light fitting suitable for 500 W GLS/ 400 W HPMV/ 400 W metal halide

Each 34,924

682 Supply and fix Flame proof - weather proof switch socket & plug combined 16 A,250 V(2P+Earth)

Each 11,507

683 Supply and fix Flame proof - weather proof switch socket & plug combined 16 A, 500 V(3P+Earth)

Each 12,653


Each 12,795


Each 13,887

686 Supply and fix Flame proof - weather proof MCB socket & plug combined 16 A, 250 V(2P+Earth)

Each 27,398

687 Supply and fix Flame proof - weather proof MCB socket & plug combined 16 A, 500 V(3P+Earth)

Each 28,547

688 Supply and fix FLP/WP switch/Isolator 10 Amp single pole ON/OFF

Each 2,201

689 Supply and fix FLP/WP switch/Isolator 10 Amp double Pole ON/OFF

Each 2,447


Page 50 of 117


690 Supply and fix FLP/WP switch/Isolator 16 Amp single Pole ON/OFF

Each 2,391

691 Supply and fix FLP/WP switch/Isolator 16 Amp double Pole ON/OFF

Each 2,613

DUST PROOF / DUST TIGHT /TOTALLY ENCLOSED TYPE TUBE LIGHT FITTING AND ACCESSORIES

692 Supply and fix Fluorescent tube light 1 x 40 Watt

Each 2,591

693 Supply and fix Fluorescent tube light 2 x 40 Watt

Each 3,307

694 Supply and fix Junction box dia 100 x 65 H Each 789

695 Supply and fix Junction box dia 120 x 70H Each 880

696 Supply and fix Junction box dia 130 x 70H Each 1,678

PRESTRESSED CEMENT CONCRETE POLES

697

Supply and fix Prestressed concrete poles of 9 meter long having 152 mm x 152 mm at top and 152 mm x 260 mm at bottom, including foundation and coping.

Each 7,754

698

Supply and fix Prestressed concrete poles of 11 meter long having 102 mm x 172 mm at top and 102 mm x 289 mm at bottom ,including foundation and coping.

Each 10,147

STEEL TUBULAR POLES

699

Supply and fix steel tubular swaged poles type 410 SP-22 (8.5 meter long) complete with CI base plate and finial including foundation and coping

Each 17,470

700 -- do -- but type 410 SP-31 (9.0 meter long)

Each 19,153


Each 17,855


Each 19,240


Each 24,187


Each 29,180

SWAN NECK TYPE (Single and double )


Page 51 of 117


705

Supply and fix steel tubular swaged poles type 410SP-31(9.0 meter long) Swan Neck Type complete with CI base plate and finial and single swan neck, Including foundation and coping .

Each 17,850

706 --do-- but type 410 SP-44 (10.0 meter long) Each 19,852


708

Supply and fix steel tubular swaged poles Type 410SP-31(9.0 meter long) Swan Neck Type complete with CI base plate and finial and double swan neck, Including foundation and coping.

Each 19,199



CRANES

711 Supply and fix Crane electrically operated OH complete with span 9 to 11 meter, lift 4.5 to 6 meter and of capacity 2 tons.

Each 14,65,330

712 .-do- but of 3 ton capacity Each 16,46,566

713 .do- but of 5 ton capacity Each 21,25,734



716 Supply and fix Crane electrically operated OH complete with span 12 to 16 meter, lift 4.5 to 6 meter and of capacity 2 tons.

Each 17,18,404





721 Supply and fix crane hand operated OH complete with span 9 to 11 meter, lift 4.5 to 6 meter and of capacity 1 tons.

Each 7,73,398





726 Supply and fix crane hand operated OH complete with span 12 to 16 meter, lift 4.5 to 6 meter of capacity 1 tons

Each 9,75,265






Page 52 of 117


CRANE FLAME PROOF

731 Supply and fix flame proof crane electrically operated OH complete with span 17 to 24 meter and of capacity 5 tons

Each 35,09,723

732 -do- but of 10 ton capacity Each 43,91,273



735 Supply and fix flame proof crane electrically operated OH complete with span 25 to 30 meter and of capacity 5 tons

Each 45,39,571



738 -do- but of 20ton capacity Each 73,90,191

LIFT

739

Supply and fix Lift electrically operated Microprocessor controlled complete with power driven automatic stainless steel (SS) sliding doors and having SS car enclosure, suitable to carry 8 passengers (544 Kg) at a speed of 1.0 M/sec to serve upto 6 floors (G+5floors).

Each 31,00,469

740 Extra cost for additional floor for 8 passengers

Each 1,71,185

741


Each 33,08,790


Each 1,71,185

743


Each 37,25,218


Each 1,85,045


Page 53 of 117


745


Each 42,62,153


Each 1,85,891

747


Each 49,63,184


Each 1,93,297

749 Automatic rescue device for lifts any capacity

Each 2,56,883

750

Supply and fix Lift electrically operated Microprocessor controlled complete with power driven automatic stainless steel (SS) sliding doors and having SS car enclosure of size 1000x2400 mm, suitable for Hospital stretcher , suitable to carry 15 passengers (1020 Kg) at a speed of 0.5 M/sec to serve upto 6 floors (G+5floors) including automatic rescue device.

Each 41,64,923

751 Extra cost for additional floor for hospital lifts Each 1,85,045

752

Supply and fix Lift electrically operated Microprocessor controlled complete with power driven automatic stainless steel (SS) sliding doors and having SS car enclosure of size 1000x2400 mm, suitable for Hospital stretcher , suitable to carry 20 passengers (1360 Kg) at a speed of 0.5 M/sec to serve upto 6 floors (G+5floors) including automatic rescue device.

Each 47,43,438

753 Extra cost for additional floor for hospital lifts Each 1,93,297

LIGHTNING PROTECTION

754 Supply & fix single pointed air termination aluminium rod 12mm dia, 300 mm dong

Each 408


Page 54 of 117


755 Supply & fix aluminium strip 25mm x 3mm complete with saddles and fixing screws for fitting the strip.

RM 204

756 Supply & fix copper strip 32mm x 6 mm buried in ground

RM 1,041

757 Supply and fix G strip 32mm x 6mm buried in ground

RM 294

EXCAVATION BY TRENCHLESS TECH

758

Boring of holes under road, pavement, hard standing by trenchless technology using ultra sounding technique and necessary machine including HDPE pipe of 150 mm dia suitable for 0.4 mpa working pressure.

RM 2,991

SOLAR PV GENERATION

759 Grid connected ground top Solar PV generation without battery MW 7,04,72,322

Components Module cost Degradation Civil and general wks Mounting structure Power Conditioning unit Cables and transformers Prelim & Op. Expenses Total

Cost(Lakh) Rs 365.80 Rs 11.29 Rs 60.00 Rs 50.00 Rs 50.00 Rs 60.00 Rs 69.00 Rs 666.09

Note: The rates for SPV generation are taken from CENTRAL ELECTRCITY

REGULATORY COMMISSION for the FY 2014-15 and service tax added. No escalation will be applied on these rates, however, these rates will stand updated as and when revised orders are issued by CERC.

760 Add 10% for single axis tracking

761 Add 20% for dual axis tracking

Ser No 762 - 1000 blank


Page 55 of 117

SECTION – 2 EXTERNAL WATER SUPPLY

(Item No. 1001 TO 1472)


Page 56 of 117


SECTION - 2 EXTERNAL WATER SUPPLY

(Item No. 1001 TO 1472)

TUBE WELLS For bore well having casing pipe for pump as 350 mm dia and other as 250

mm dia

1001 Fixing cost for MS reducer, bail plug, well cap, MS strip for centering, MS iron clamps, electric logging and sample strata box.

Job 67,596

1002 Trial bore of 250 mm dia upto 200meter depth below ground level in any kind of soil strata including hard stone/boulder etc.

RM 1,820

1003

Trial bore of 250 mm dia exceeding 200meter depth below ground level and upto 400 RM in any kind of soil strata including hard stone/boulder etc.

RM 2,384

1004 Development of trial bore by reaming in following step:-

(a) From 250mm to 350 mm

(b) From 350mm to 450 mm

(c) From 450mm to 550 mm

(d) From 550mm to 650 mm

(a) Reaming up to 675 mm for 60 RM from ground level including casing pipe of 350mm dia and thickness 8mm and pea gravel.

RM 11,396

(b)

Reaming up to 525 mm from depth exceeding 60 meter to 200 meter including casing pipe of 250mm dia and thickness 8mm and pea gravel.

RM 6,861

(c)

Reaming up to 525 mm from depth exceeding to 200 meter to 300 meter including casing pipe of 250mm dia and thickness 8mm and pea gravel.

RM 8,522

(d)


RM 9,822

1005 Additional cost for slotted pipe of 250 mm dia in lieu of casing pipe of 250 mm dia.

RM 2,311


Page 57 of 117


1006 Development of tube well with compressed air and after with 25% extra capacity pump by pumping muddy water.

Per Hr 3,250

1007 Yield test for the bore well by continuously pumping for 16 hours to determine safe pumping yield.

Each job

51,997

For bore well having casing pipe for pump as 200 mm dia

1008 Fixing cost for MS reducer, bail plug, well cap, MS strip for centering, MS iron clamps, electric logging and sample strata box.

Job 61,241

1009

Trial bore of 200 mm dia upto 200meter depth below ground level in any kind of soil strata including hard stone/boulder including electric logging, MS cap, MS flat iron clamps, reducing socket etc.

RM 1,618

1010

Trial bore of 200 mm dia exceeding 200meter depth below ground level and upto 400 RM in any kind of soil strata including hard stone/boulder etc.

RM 2,095

1011 Development of trial bore by reaming in following step:-

(a) From 200mm to 350 mm

(b) From 350mm to 450 mm

(c) From 450mm to 550 mm

(a) Reaming up to 525 mm for 60 RM from ground level including casing pipe of 200mm dia and thickness 8mm and pea gravel.

RM 11,266

(b)

Reaming up to 525 mm from depth exceeding 60 metre to 200 meter including casing pipe of 200mm dia and thickness 8mm and pea gravel.

RM 6,861

(c)


RM 8,522

(d)


RM 9,822

1012 Additional cost for slotted pipe of 200 mm dia in lieu of casing pipe of 200 mm dia.

RM 2,095


Page 58 of 117


1013 Development of tube well with compressed air and after with 25% extra capacity pump by pumping muddy water.

Per Hr 3,250

1014 Yield test for the bore well by continuously pumping for 16 hours to determine safe pumping yield.

Each job

51,997

PUMPSET/ STARTER

Supply and Fix Star delta Starter fully automatic suitable for 415 V AC

1015 For 12.5 HP Motor Each 9,719







1022 For 90 HP Motor Each 73,620


1024 For 250.0 HP Motor Each 1,51,230

1025 For 400.0 HP Motor Each 1,81,746

Supply and Fix Submersible Pump Starter







Supply and Fix DOL Starter

1032 For 2 HP Each 3,020

1033 For 7.5 HP Each 3,392

1034 For 10.0 HP Each 4,197

1035 For 15.0 HP Each 4,784

1036 For 20.0 HP Each 7,492

Supply and Fix MONOBLOCK PUMP SET

1037 Monoblock pump set suitable for 415 V ,3 phase system having capacity 5 HP.

Each 42,404

1038 Monoblock pump set suitable for 415 V, 3 phase of capacity 10 HP.

Each 63,352

1039 Monoblock pump set suitable for 415 V, 3 phase system having capacity 12.5 HP.

Each 70,289


Page 59 of 117


1040 Monoblock pump set suitable for 415 V, 3 phase system having capacity 15 HP.

Each 74,378

CENTRIFUGAL PUMP SET

1041 Pumping sets, centrifugal, electric driven, supply and Install complete up to 5 WHP inclusive of starter and PCC foundation.

WHP 17,706

1042 - do - but above 5 WHP upto 10 WHP WHP 15,010





IC ENGINE DRIVEN PUMPS

1047 Pumping sets, centrifugal, IC engine driven, supply and Install complete up to 5 WHP inclusive of starter and PCC foundation.

WHP 54,329





Note :Item No 1037 -1046 Includes cost of automatic starter for pump above 10 WHP. For pump upto 10 WHP, cost of DOL starter has been included.

SUBMERSIBLE PUMPS

1052

Submersible pump, electric driven 415 V, TP suitable for 200/250 mm dia bore well ( Casing pipe size 200/250 mm) supply and Install complete upto 5 WHP inclusive of 40 metre long submersible cable and starter.

WHP 15,874





1057 - do - but above 25 WHP WHP 7,285

1058

Submersible pump, electric driven 415 V, TP suitable for 250 mm dia bore well ( Casing pipe size 300/350 mm) supply and Install complete upto 10 WHP inclusive of 40 metre long submersible cable and starter.

WHP 10,947



1061 - do - but above 25 WHP WHP 7,802

DISINFECTION,TREATMENT PLANTS


Page 60 of 117


1062

Supply and fix direct cylinder mounted type vacuum chlorinator for pressure feed including all gauges, pump, motor conforming to IS 10553 part - 2 having capacity 1.0 to 1000gm/hr.

Each 1,70,325

1063

Supply and fix direct cylinder mounted type vacuum chlorinator for gravity feed including all gauges, pump, motor conforming to IS 10553 part - 2 having capacity 1.0 to 1000gm/hr.

Each 1,56,153

1064

Supply and fix pressure feed gaseous chlorinator conforming to IS 10553 Part - 4 with pump, motor, gauges having capacity 1 to 1000gm/hr.

Each 1,59,696

1065

Supply and fix gravity feed gaseous chlorinator conforming to IS 10553 Part-4 with pump, motor, gauges having capacity 1 to 1000 gm./hr.

Each 1,24,265

1066 Supply and fix bleaching dozer bucket type of capacity 105 Litres.

Each 39,373


Each 48,656


Each 27,894

1069

Supply and Installation of Iron remover plant complete with pressure filter, catalytic media, air compressor, back washing facility including RCC foundation of capacity 5000 gallon/hr.

Each 10,31,679

1070


Each 12,93,866

1071


Each 16,16,286

PIPES

CAST IRON PIPE CLASS 'B'


Page 61 of 117


1072 Supply and lay Pipe cast Iron, S/S including specials, Class"B", 80mm(3") dia

RM 2,184

1073 - do - but 100 mm (4") dia RM 2,733

1074 - do - but 150 mm (6") dia RM 3,661

1075 - do - but 200 mm (8") dia RM 5,102

1076 - do - but 250 mm (10") dia RM 6,491

1077 - do - but 300 mm (12") dia RM 8,551

1078 - do - but 350 mm (14") dia RM 10,914

1079 - do - but 400 mm (16") dia RM 12,987

1080 - do - but 450 mm (18") dia RM 17,276

1081 - do - but 500 mm (20") dia RM 21,298

1082 - do - but 600 mm (27") dia RM 28,240

1083 Supply and lay Pipe cast Iron both ends flanged and drilled, including specials ,Class "B" ,80 mm (3") dia.

RM 3,311

1084 - do - but 100 mm (4") dia RM 2,904

1085 - do - but 150 mm (6") dia RM 3,791

1086 - do - but 200 mm (8") dia RM 5,381

1087 - do - but 250 mm (10") dia RM 6,411

1088 - do - but 300 mm (12") dia RM 8,381

CAST IRON PIPE CLASS 'A'

1089 Supply and lay pipe cast Iron, S/S including specials, Class "A", 80 mm(3") dia.

RM 1,986

1090 - do - but 100 mm (4") dia RM 2,519

1091 - do - but 150 mm (6") dia RM 3,465

1092 - do - but 200 mm (8") dia RM 4,604

1093 - do - but 250 mm (10") dia RM 6,029

1094 - do - but 300 mm (12") dia RM 7,642

1095 - do - but 350 mm (14") dia RM 9,199

1096 - do - but 400 mm (16") dia RM 11,960

1097 - do - but 450 mm (18") dia RM 15,317

1098 - do - but 500 mm (20") dia RM 18,705

1099 - do - but 600 mm (27") dia RM 19,542

CAST IRON PIPE CLASS ‘LA’

1100 Supply and lay pipe cast Iron, S/S including specials, Class “LA”, 80 mm (3”)dia

RM 1,757

1101 - do - but 100 mm (4") dia RM 1,701

1102 - do - but 150 mm (6") dia RM 2,436

1103 - do - but 200 mm (8") dia RM 3,568

1104 - do - but 250 mm (10") dia RM 4,547

1105 - do - but 300 mm (12") dia RM 5,855


Page 62 of 117


1106 - do - but 350 mm (14") dia RM 7,240

1107 - do - but 400 mm (16") dia RM 9,327

1108 - do - but 450 mm (18") dia RM 11,257

1109 - do - but 500 mm (20") dia RM 13,851

1110 - do - but 600 mm (27") dia RM 16,912

DUCTILE IRON PIPE

CLASS K-9

1111 Supply and lay pipe ductile Iron , S/S including specials, Class “K-9” ,100 mm (4”) dia

RM 1,592

1112 - do - but 150 mm (6") dia RM 2,151

1113 - do - but 200 mm (8") dia RM 2,814

1114 - do - but 250 mm (10") dia RM 4,430

1115 - do - but 300 mm (12") dia RM 4,807

1116 - do - but 350 mm (14") dia RM 5,762

1117 - do - but 400 mm (16") dia RM 7,026

1118 - do - but 450 mm (18") dia RM 8,346

1119 - do - but 500 mm (20") dia RM 9,990

1120 - do - but 600 mm (27") dia RM 12,591

CLASS K – 7

1121 Supply and lay pipe ductile Iron , S/S including specials, Class “K-7” ,100 mm (4”) dia

RM 1,392

1122 - do - but 150 mm (6") dia RM 1,958

1123 - do - but 200 mm (8") dia RM 2,488

1124 - do - but 250 mm (10") dia RM 3,371

1125 - do - but 300 mm (12") dia RM 4,347

1126 - do - but 350 mm (14") dia RM 5,133

1127 - do - but 400 mm (16") dia RM 6,040

1128 - do - but 450 mm (18") dia RM 7,276

1129 - do - but 500 mm (20") dia RM 8,553

1130 - do - but 600 mm (27") dia RM 11,106

Note : Item No 1072 - 1130 Rate include cost of laying, excavation, jointing etc.

GI PIPES ‘ MEDIUM CLASS’

1131 Supply and lay pipe galvanized, “Medium class”, including fittings 15 mm (1/2”) dia.

RM 231

1132 -- do -- but 20 mm (3/4”) dia RM 263

1133 .-- do -- but 25 mm (1.0”) dia RM 300

1134 -- do -- but 40 mm (1.5”) dia RM 404

1135 -- do -- but 50 mm (2”) dia RM 505

1136 -- do -- but 63 mm (2½”) dia RM 726


Page 63 of 117


1137 -- do -- but 80 mm (3”) dia RM 815

1138 -- do -- but 100 mm (4”) dia RM 1,180

1139 -- do -- but 150 mm (6”) dia RM 2,384

1140 -- do -- but 200 mm (8”) dia RM 2,704

GI PIPES ‘ HEAVY CLASS’

1141 Supply and lay pipe galvanized, “Heavy class”, including fittings, 15 mm (1/2”) dia.

RM 289

1142 -- do -- but 20 mm (1½”) dia RM 341

1143 -- do -- but 25 mm (1”) dia RM 452

1144 . --do-- but 40 mm (1½”) dia RM 591

1145 -- do-- but 50 mm (2”) dia RM 781

1146 -- do-- but 63 mm (2½”) dia RM 1,050

1147 -- do-- but 80 mm (3”) dia RM 1,237

1148 -- do-- but 100 mm (4”) dia RM 1,739

1149 -- do-- but 150 mm (6”) dia RM 2,596

Note : Item No 1131 - 1149 Rate include cost of laying, excavation, jointing etc.

M S PIPE (ERW)

1150 Supply and fix Pipe ERW Steel including specials, nominal dia 150 mm as per IS 3589 (1981) thickness 4.8 mm

RM 1,918

1151 -- do -- but 200 mm dia RM 2,249

1152 -- do -- but 250 mm dia RM 2,770

1153 -- do -- but 300 mm dia RM 3,209

1154 Supply and lay Pipes ERW Steel including specials, nominal dia 150 mm, as per IS 3589 (1981) thickness 5.4 mm

RM 2,032

1155 -- do -- but 200 mm dia RM 2,350

1156 -- do -- but 250 mm dia RM 2,935

1157 -- do -- but 300 mm dia RM 3,410

1158 Supply and lay Pipes ERW Steel including specials, nominal dia 150 mm as per IS 3589 (1981) thickness 6.0 mm

RM 2,133

1159 -- do -- but 200 mm dia RM 3,816

1160 -- do -- but 250 mm dia RM 3,417

1161 -- do -- but 300 mm dia RM 3,960

Note :Item No 1150-1161 Cost of ERW pipe does not include cost of excavation

PVC ( UPVC) PIPE CONFORMING TO IS: 13592 FOR SOIL AND WASTE WATER DISCHARGE AND RAIN WATER SYSTEM

1162 Supply and lay Pipe PVC class “A” conforming to IS 13592 including special, OD 75 mm dia.

RM 192


Page 64 of 117


1163 - do - but 110 mm dia. RM 282

1164 -- do -- but 160 mm dia RM 787

1165 Supply and lay Pipe PVC class “B” including Special, OD 75 mm dia

RM 269

1166 - do - but 110 mm dia. RM 436

1167 -- do -- but 160 mm dia RM 874

Note :Item No 1162-1167 Cost of PVC does not include cost of excavation

PP-R PIPE

1168

Supply and lay 3 layer ( inner antimicrobial, outer UV stabilized) ISI marked ,IS-15801, PP-R pipes SDR 11 (PN-10) and PP-R plain fittings in trenches/walls/cellings or laying in floors complete of size outer dia 25 mm including all fittings

RM 271

1169 - do - but outer dia 32 mm RM 334




1173 - do - but outer dia 75 mm RM 1,089




1177

Supply and lay 3 layer ( inner antimicrobial, outer UV stabilized) ISI marked,IS-15801, PP-R pipes SDR 7.4 (PN-16) and PP-R plain fittings in trenches/walls/cellings or laying in floors complete of size outer dia 16 mm ,including fittings

RM 173












Page 65 of 117


1188

Supply and lay 3 layer ( inner antimicrobial, outer UV stabilized) ISI marked, IS-15801, PP-R pipes SDR 6 (PN-20) and PP-R plain fittings in trenches/walls/cellings or laying in floors complete of size outer dia 16 mm, including fittings

RM 217











1199

Supply and lay 3 layer ( inner antimicrobial, outer UV stabilized) ISI marked, IS-15801, PP-R pipes SDR 13.5 (PN-8) and PP-R plain fittings in trenches/walls/cellings or laying in floors complete of size outer dia 90 mm ,including fittings

RM 1,326



1202

Supply and lay 3 layer ( inner antimicrobial, outer UV stabilized) ISI marked,IS-15801 ,PP-R pipes SDR 7.4 (PN-16) and PP-R plain plain and brass threaded fittings laid in concealed work complete of size outer dia 16 mm

RM 317




1206

Supply and lay 3 layer ( inner antimicrobial, outer UV stabilized) ISI marked, IS-15801, PP-R pipes SDR 6 (PN-20) and PP-R plain and brass threaded fittings laid in concealed work complete of size outer dia 16 mm, including fittings

RM 388





Page 66 of 117


Note : PP-R pipe rate does not include the cost of excavation etc

PP-R GATE VALVE

1210 Supply and fix PPR Gate Valves (Brass Insert) of 20 mm bore.

Each 1,048

1211 - do - but outer dia 25 mm Each 1,177








PP-R BALL VALVES

1219 Supply and fix PPR Ball Valves (Brass Insert) of 20 mm bore.

Each 678

1220 - do - but outer dia 25 mm Each 793








VALVES

SLUICE VALVES CLASS PN 1.0

1228 Supply and fix Valves, Sluice, flanged of class 1.0 PN,50 mm (2”)dia

Each 7,164

1229 -- do -- but 65 mm (2½”) dia Each 7,777

1230 -- do -- but 80 mm (3”) dia Each 8,968

1231 -- do -- but 100 mm (4”) dia Each 11,671

1232 -- do -- but 150 mm (6”) dia Each 17,252

1233 -- do -- but 200 mm (8”) dia Each 29,304

1234 -- do -- but 250 mm 106”) dia Each 42,055

1235 -- do -- but 300 mm (12”) dia Each 52,854

1236 -- do -- but 350 mm (14”) dia Each 79,748

1237 -- do -- but 400 mm (16”) dia Each 99,572

1238 -- do -- but 450 mm (18”) dia Each 1,22,586

1239 -- do -- but 500 mm (20”) dia Each 1,66,470

1240 -- do -- but 600 mm (24”) dia Each 2,12,228

SLUICE VALVES CLASS PN 1.6


Page 67 of 117


1241 Supply and fix Valves, Sluice, flanged of class 1.6 PN ,50 mm (2”)dia.

Each 8,088

1242 -- do -- but 65 mm (2½”) dia Each 9,242

1243 -- do -- but 80 mm (3”) dia Each 10,629

1244 -- do -- but 100 mm (4”) dia Each 13,971

1245 -- do -- but 150 mm (6”) dia Each 20,622

1246 -- do -- but 200 mm (8”) dia Each 35,126

1247 -- do -- but 250 mm 106”) dia Each 50,508

1248 -- do -- but 300 mm (12”) dia Each 64,511

1249 -- do -- but 350 mm (14”) dia Each 95,271

1250 -- do -- but 400 mm (16”) dia Each 1,10,151

1251 -- do -- but 450 mm (18”) dia Each 1,28,745

1252 -- do -- but 500 mm (20”) dia Each 2,32,511

1253 -- do -- but 600 mm (24”) dia Each 2,92,838

REFLEX VALVES

1254 Supply and fix Valve, reflux, with by-pass Arrangement, 50 mm (2”) dia

Each 7,610

1255 -- do -- but 65 mm (2.5”) dia Each 8,330

1256 -- do -- but 80 mm (3”) dia Each 9,119

1257 -- do -- but 100 mm (4”) dia Each 11,501

1258 -- do -- but 150 mm (6”) dia Each 17,540

1259 -- do -- but 200 mm (8”) dia Each 28,309

1260 -- do -- but 250 mm (10”) dia Each 50,225

1261 -- do -- but 300 mm (12”) dia Each 60,233

1262 -- do -- but 350 mm (14”) dia Each 99,021

1263 -- do -- but 400 mm (16”) dia Each 1,23,589

1264 -- do -- but 450 mm (18”) dia Each 1,69,574

1265 -- do -- but 500 mm (20”) dia Each 2,69,559

1266 -- do -- but 600 mm (24”) dia Each 3,38,778

BUTTERFLY VALVES

1267 Supply and fix Valve, butterfly conforming to IS 13095,50 mm (2”) dia.

Each 4,490

1268 -- do -- but 65 mm (2.5”) dia Each 5,015

1269 -- do -- but 80 mm (3”) dia Each 5,621

1270 -- do -- but 100 mm (4”) dia Each 6,681

1271 -- do -- but 150 mm (6”) dia Each 9,894

1272 -- do -- but 200 mm (8”) dia Each 15,604

1273 -- do -- but 250 mm (10”) dia Each 24,049

1274 -- do -- but 300 mm (12”) dia Each 32,784

1275 -- do -- but 350 mm (14”) dia Each 47,763

1276 -- do -- but 400 mm (16”) dia Each 58,173


Page 68 of 117


1277 -- do -- but 450 mm (18”) dia Each 69,401

1278 -- do -- but 500 mm (20”) dia Each 1,07,846

1279 -- do -- but 600 mm (24”) dia Each 1,34,797

FOOT VALVES

1280 Supply and fix Foot Valve conforming to IS 4038, 50 mm (2”) dia.

Each 4,108

1281 -- do -- but 65 mm (2.5”) dia Each 4,728

1282 -- do -- but 80 mm (3”) dia Each 5,697

1283 -- do -- but 100 mm (4”) dia Each 7,548

1284 -- do -- but 150 mm (6”) dia Each 11,672

1285 -- do -- but 200 mm (8”) dia Each 22,087

1286 -- do -- but 250 mm (10”) dia Each 31,483

1287 -- do -- but 300 mm (12”) dia Each 42,288

1288 -- do -- but 350 mm (14”) dia Each 69,567

1289 -- do -- but 400 mm (16”) dia Each 88,413

STRAINER

1290 Supply and fix Strainer Y type conforming to IS, size50 mm (2”) dia.

Each 5,110

1291 -- do -- but 65 mm (2.5”) dia Each 7,043

1292 -- do -- but 80 mm (3”) dia Each 9,147

1293 -- do -- but 100 mm (4”) dia Each 12,654

1294 -- do -- but 150 mm (6”) dia Each 17,152

1295 -- do -- but 200 mm (8”) dia Each 29,465

1296 -- do -- but 250 mm (10”) dia Each 42,477

1297 -- do -- but 300 mm (12”) dia Each 63,513

1298 -- do -- but 350 mm (14”) dia Each 67,349

1299 -- do -- but 400 mm (16”) dia Each 84,094

AIR RELEASE VALVE

1300

Supply and fix Cast Iron Air Valves with single air Outlets, conforming to IS 14845 of size 50 mm dia bore and fixing up in Cast Iron Water supply mains of size 50 mm dia.

Each 8,505

1301 Cast Iron Air Valves with two air Outlets, 50 mm dia bore and fixing Up in cast iron water supply mains

Each 7,898

1302 -- do -- but 80 mm dia bore Each 9,487




GLOBE VALVE


Page 69 of 117


1306 Supply and fix Valve, globe conforming to IS 9338,50mm (2”) dia pipe

Each 5,862

1307 -- do -- but 65 mm (2.5”) dia Each 8,716

1308 -- do -- but 80 mm (3”) dia Each 11,127

1309 -- do -- but 100 mm (4”) dia Each 18,780

1310 -- do -- but 150 mm (6”) dia Each 31,419

1311 -- do -- but 200 mm (8”) dia Each 55,309

1312 -- do -- but 250 mm (10”) dia Each 86,113

1313 -- do -- but 300 mm (12”) dia Each 1,14,761

STOP COCK, BIB COCK

1314 Supply and fix Valve, stop, screwed,15 mm (1/2”) dia pipe

Each 728

1315 -- do -- but 20 mm (3/4”) dia pipe Each 946

1316 -- do-- but 25 mm (1”) dia pipe Each 1,431

1317 -- do-- but 40 mm (1.5”) dia pipe Each 2,825

1318 -- do-- but 50 mm (2”) dia pipe Each 4,336

1319 Supply and fix Cock, bib, brass, screwed down For size 15 mm (1/2”) dia pipe

Each 450

1320 -- do-- but 20 mm (3/4”) dia pipe Each 466

1321 -- do-- but 25 mm (1”) dia pipe Each 517

1322 Supply and fix Cock, bib, brass chromium plated, screwed down For size 15 mm (1/2”) dia pipe

Each 896

1323 Supply and fix Cock, pillar, brass chromium plated, screwed down for size 15 mm (1/2”) dia pipe

Each 915

1324 Supply and fix Cock, stop, brass chromium plated, screwed down for size 15 mm (1/2”) dia pipe

Each 806

1325 Supply and fix Cock, bib, brass chromium plated, screwed down For size 20 mm (3/4”) dia pipe

Each 873

HOT WATER APPARATUS

1326 Supply and fix Water heater storage type, electric,capacity 25 litres.BEE 5 star rated

Each 15,003

1327 Supply and fix Water heater storage type, electric, capacity 35 litres

Each 15,456

1328 -- do-- but of capacity 50 litres Each 19,314




Page 70 of 117


1331

Supply and Installation of Solar water heating system ,Flat plate collector type ,with heat exchanger of 100 litre per day capacity ,with electrical heating back up

Each 48,552

1332


Each 88,887

1333


Each 1,39,120

1334


Each 2,14,748

1335


Each 4,38,832

1336


Each 6,46,111

1337

Supply and Installation of Solar water heating system ,Flat plate collector type ,with heat exchanger 2000 litre per day capacity ,with electrical heating back up

Each 8,53,389

Note: Item No 1331-1337 Solar water heater rates include the cost of civil wks,cold and hot water tanks,cold and hot water pipe lines,insulation,electical cabling etc.In case if the length of insulated hot water pipe is more than 1RM/10Ltr cap in that case cost for additional length of insulated pipe to be estimated and included.

FIRE FIGHTING

1338 Supply & fix fire hydrant landing valve type A (single head outlet) of 63 mm dia conforming to IS 5290

Each 12,077

1339 - do - but type B ( double head outlet) Each 23,563


Page 71 of 117


1340

Supply and fix hose box for keeping 2 Nos hose pipe of length 15 meter each, branch pipe.nozzle, coupling etc of MS sheet of Thickness 2.0 mm

Each 5,344

1341 Supply and fix 63 mm dia gun metal branch pipe with 12.5 mm nozzle conforming to IS 903

Each 4,306

1342

Supply and fix hose box for hose reel of 20 mm size of 30 meter length complete with coupling branch pipe and nozzle , MS sheet 2 mm thickness

Each 7,629

1343 Supply and fix hose reel of 20 mm dia and 30 meter length conforming to IS 5132

Each 15,717

1344 Supply and fix branch pipe with nozzle of 20 mm dia for hose reel conforming to IS 8090

Each 1,402

1345

Supply and fix 63 mm dia 15 meter long hose conforming to IS 636 complete with male and female coupling conforming to IS 903

Each 6,398

1346 Supply and fix fire hydrant stand post with provn of single outlet conforming to IS 908

Each 3,767

1347

Supply and fix electric motor siren conforming to IS 1941 suitable for three phase 415 V supply with motor not exceeding 3.75 KW power and able to deliver 143 DB noise level.

Each set

12,714

1348 Supply and Install Electric Driven Jockey pump delivering 180 LPM up to 70 Meter head

Each 2,38,796

1349 Supply and Install Electric Driven Jockey pump delivering 180 LPM above 70 meter head up to 90 meter head

Each 2,80,519

1350 Supply and Install Booster pump up to 30 meter head discharge 450 LPM

Each 1,21,092

1351 .--do-- but 900 LPM Each 1,22,484

1352 Supply and Install Booster pump 36 meter head discharge 450 LPM

Each 1,44,948

1353 Supply and Install Booster pump 36 meter head discharge 900 LPM

Each 1,44,948


Page 72 of 117


1354

Supply and Install Diesel Engine driven fire pump horizontal end suction , centrifugal type,CI casing and bronze impeller stainless steel shaft, suitable for delivering 1620 LPM, 70 meter head ,1800RPM

Each 9,09,619

1355 .--do-- but 90 M head,but 2150RPM Each 8,10,687

1356

Supply and Install Diesel Engine driven fire pump horizontal end suction , centrifugal type,CI casing and bronze impeller stainless steel shaft, suitable for delivering 2280 LPM, 70 meter head,1800RPM

Each 9,09,619

1357 .--do-- but 90 M head,1800RPM Each 9,09,619

1358

Supply and install Diesel Engine driven fire pump horizontal end suction , centrifugal type,CI casing and bronze impeller stainless steel shaft,suitable for delivering 2640 LPM, 70 meter head,1800 RPM

Each 9,09,619

1359 .--do-- but 90 M head,1800 RPM Each 10,14,489

1360

Supply and Install Diesel Engine driven fire pump horizontal end suction , centrifugal type,CI casing and bronze impeller stainless steel shaft suitable for delivering 2850 LPM, 70 meter head,1800 RPM

Each 9,09,619

1361 .--do-- but 90 M head Each 10,14,489

1362

Supply and Install Diesel Engine driven fire pump horizontal end suction , centrifugal type,CI casing and bronze impeller stainless steel shaft, suitable for delivering 4560 LPM, 70 meter head,2300 RPM

Each 10,68,982


1364

Supply and Install Electric driven fire pump horizontal end suction , centrifugal type,CI casing and bronze impeller stainless steel shaft, suitable for delivering 1620 LPM, 70 meter head,2900 RPM

Each 3,03,036


1366


Each 4,16,971



Page 73 of 117


1368


Each 4,16,971


1370

Supply and Install Electric driven fire pump horizontal end suction , centrifugal type,CI casing and bronze impeller stainless steel shaft,suitable for delivering 2850 LPM, 70 meter head,2900 RPM

Each 4,16,971


1372

Supply and Install Electric driven fire pump horizontal end suction , centrifugal type,CI casing and bronze impeller stainless steel shaft, suitable for delivering 4560 LPM, 70 meter head ,1480 RPM

Each 11,44,172

1373 .--do-- but 90 M head, 2900 RPM Each 10,03,440

1374

Supply and fix MS flanged pipe 25mm NB heavy duty for multi storied building duly painted with 2 coats of synthetic enamel paint over coat of zinc chromate primer

RM 477

1375


RM 604

1376


RM 656

1377


RM 910

1378


RM 1,122

1379


RM 1,418


Page 74 of 117


1380


RM 2,032

1381


RM 2,855

1382


RM 3,343

1383 Supply and fix 80mm bore hand operated butterfly valve of pressure not less than 15 Kg / Sqcm with complete set

Each 6,370


Each 8,295


Each 11,109


Each 20,907

1387 Supply and fix Dual plates CI wafer type check valve, 80 mm bore tested to pressure of 15Kg/ Sqcm complete set

Each 7,406

1388 Supply and fix Dual plates CI wafer type check valve, 150 mm bore tested to pressure of 15Kg/ Sqcm complete set

Each 13,331

1389 Supply and fix Pressure gauge 100 mm dia with ball valve of pressure 25 Kg/Sqcm

Each 1,334

1390

Supply and fix Gun metal fire brigade in let connection for connecting to external fire hydrant ring main consisting of two nos 63mm dia instantaneous type male coupling with built in check valves and 150mm dia, flanged outlet complete with all accessories.

Each 12,696


Page 75 of 117


1391

Supply and fix Gun metal fire brigade inlet connection (suction collecting head) consisting of four nos 63mm dia instantaneous type male coupling with built in check valves and 150mm dia sluice valve (one no 150mm dia NRV), and 150mm dia flanged outlet complete with all accessories.

Each 10,157

1392

Supply and fix MS cabinet (approx 750mm x 600mm x 450mm) to encl fire brigade inlet connections fabricated from 16 gauge sheet with full front glass door and locking arrangement painted and mounted on masonry platform complete

Each 12,696

1393

Supply and fix Air cushioning tank (Air vessel) 250mm dia x 1000mm high with dished top, made of minimum 6mm thick MS pipe /plate complete with 20mm dia. Brass air valve (ball type), 20mm dia stop valve, pressure gauge with brass stop cock, nipple tees elbows and all accessories complete

Each 13,585

1394 Supply and fix Automatic air release valve 50mm dia suitable for domestic water with 50mm gun metal stop valve complete

Each 12,696

1395

Supply and fix Mild Steel class 'C' diesel pump exhaust pipe 150mm dia with one layer of10mm thick asbestos rope insulation and including all fitting clamp/ structural steel supports complete

RM 2,286

1396 Supply and fix Bulb type gun metal sprinkler head pendent type set to operate at 68 degree C

Each 494

1397 .--do--upright type Each 456

1398 .--do--but side wall type Each 637

1399 .--do--but concealed type Each 1,899

1400 Supply and fix Bulb type gun metal sprinkler head, pendent type, set to operate at 79 degree C

Each 488

1401 .--do--upright type Each 488

1402 .--do--but side wall type Each 738



Page 76 of 117


1404 Supply and fix Sprinkler quick/early response type , pendent type, set to operate at 68 degree C

Each 1,232

1405 .--do--upright type Each 1,292

1406 Supply and fix Sprinkler quick /early response type , pendent type, set to operate at 79 degree C

Each 1,232


1408

Supply and fix Fire alarm control panel complying with BS EN 54 Single loop panel of capacity from 99 detectors & 99 modules upto 200 detector

Each set

1,31,346

1409 -ditto - but 2 loop panel with 99 detectors & 99 modules & upto 200 detectors and modules per loop

Each set

1,55,466


Each set

2,82,319


Each set

8,19,209

1412

Supply and fix Detectors Complying with and type certified to EN-45 Addressable type smoke detector Photoelectric / Optical with base with self built intelligence as per IS: 11360

Each 5,378

1413 ditto but Addressable type multisensor detector with heat and smoke combination

Each 6,129

1414 .--do-- but Addressable type heat detector with base with rate of rise cum fixed temperature as per IS: 2175

Each 5,378

1415 ditto but Addressable type duct detector housing with sampling tube add up cost of smoke detector

Each 13,046

1416

ditto but Addressable type Flame detectors with UV/IR detection Capacity (add up cost of module to be a complete set, the type of module shall be relay type module)

Each 1,53,565

BEAM MASTER DETECTOR

1417 Supply and fix Beam Master detector with Transmitter and receiver (Add power supply unit & module)

Each 99,165


Page 77 of 117


1418 Supply and fix Beam Master Detector, Transceiver Type (Add power supply unit & module)

Each 1,02,381

ANNUCIATING DEVICES

1419 Supply and install Addressable control module

Each 7,264

1420 Supply and fix Addressable monitor module Each 7,264

1421 Supply and fix Addressable manual call point resettable type

Each 6,835

1422 Supply and fix Addressable electronic sounder cum strobe

Each 9,301

1423 Supply and fix Addressable sounder Each 7,264

1424 Supply and fix Loop powered sounder strobe

Each 8,335

1425 Supply and fix Short circuit isolators Each 3,726

1426 Supply and fix Explosive proof manual call point (Add up control module)

Each 11,123

1427 Supply and fix Remote response indicators Each 199

1428 Supply and fix 6 Watt ceiling Speaker Each 1,573

1429 Supply and fix 4 Watt ceiling Speaker Each 1,545

PA SYSTEM

1430 Supply and fix 6 Watt wall mount CD Speaker

Each 3,039

1431 Supply and fix 10 Watt wall mount CD Speaker

Each 3,726

1432 Supply and fix 100 Watt amplifier Each 43,207

1433 Supply and fix 250 Watt Amplifier Each 66,381

1434 Supply and fix 500 Watt Amplifier Each 83,980

1435 Supply and fix Microphone set Each 7,505

1436 Supply and fix Control Console Each 50,395

1437

Supply and fix Fire Alarm sounders / Sirens electronic type horizontal single stage continuous normal operation for at least 50 minutes with sound level 65 DB to 120 DB measured at 1.5 meter with sound output variation of + 5 DB for 500 meter range

Each 11,249

1438 ditto but 1000 m range Each 11,416





Page 78 of 117


1442

Supply and fix Fire Alarm sounders / Sirens electronic type horizontal two stage continuous normal operation for at least 50 minutes with sound level 65 db to 120 db Measured at 1.5 m with sound output variation of + 5 db 500m range

Each 12,096

1443 ditto but 1000m range Each 14,420



1446 Supply and fix Addressable manual call point break glass type with alarm LED complete

Each 7,110

1447 Response indicator unit complete Each 124

SWIMMING POOL FILTRATION PLANT

1448

Supply and install filtration cum recycle plant for swimming pool of size 50 x 21 x 2.85 (Avg. depth) meter having total water capacity 30,00,000 Litre suitable for 6 hr. turn over period complete with following:—

Each 1,58,70,000

Filtration rate 500 M3/Hr

(a) Pressure filter suitable for flow rate of 125 M3/hr,pressure 2.5 Kg/cm2 ,4Nos

(b) Water circulating pump 5Nos(4 W + 1S)having discharge 125 M3/hr.

(c) Complete UPVC Pipe network, with in filtration plant and from plant to swimming pool basin, suitable for 10 Kg/cm2 pressure

(d) Valves, Valve battery its support, chemical dosing pumps, tank agitators

(e) Pool basin accessories, pool cleaning and maintenance equipment.

(f) Stainless steel Swimming pool Ladder , electric panel suitable for filtration plant etc


Page 79 of 117


(g) All E/M items except under water lighting

1449 Add 20% for under water light in 30,00,000 Litre capacity swimming pool

1450

Supply and install filtration cum recycle plant for swimming pool of size 25 x 13.5 x 2.35 (Avg. depth) meter having total water capacity 8,00,000 Litre suitable for 5-6 hr. turn over period complete with following:—

Each 52,90,000

(a) Pressure filter suitable for flow rate of 80M3/hr,pressure 2.5 Kg/cm2 ,2Nos

(b) Water circulating pump 3Nos(2W + 1S)having discharge 80 M3/hr.

(c) Complete UPVC Pipe network, with in filtration plant and from plant to swimming pool basin, suitable for 10 Kg/Cm2 pressure

(d) Valves, Valve battery its support, chemical dosing pumps, tank agitators

(e) Pool basin accessories,pool cleaning and maintenance equipment.

(f) Stainless steel Swimming pool Ladder , electric panel suitable for filtration plant etc

(g) All E/M items except under water lighting accounted

1451 Add 15 % for under water lighting for 8,00,000 Litre capacity swimming pool

Note : For Item No 1448 and 1451Cost of civil wks is extra

PRESSURE FILTER

1452 Supply and fix Pressure filter for flow rate of 22 M3/hr.

Each 6,94,244

1453 -- do – but flow rate 35 M3/hr. Each 8,33,371







Page 80 of 117




SWIMMING POOL WATER TREATMENT BASED ON CU++ AND AG++ ION BASED TECHNOLOGY

1461 Supply and fix Ionizer system for swimming pool capacity up to 3.0 lakh litre

Each 12,38,231

1462 .-- do – but for capacity 3.0 to 5.0 lakh litre Each 15,61,701



1465 .-- do – but for capacity 10.0 to 12.5lakh litre Each 26,99,064

1466 .-- do – but for capacity 12.5 to 15.0 lakh litre

Each 30,39,925


Each 38,39,906


Each 57,38,989

RO PLANT

1469 Supply and fix Reverse Osmosis Plant of out put capacity of 25 Litres per hour

Each 60,042


Each 1,85,605


Each 2,28,550


Each 2,90,343

NOTE: RO Rates include cost of civil wks,raw water/clear water storage tank,softener,plumbing and electrical wks. Feed water characterstics: Turbidity <5 ppm,Iron <0.3 ppm,ph range 6.5-7.2,total hardness <500ppm,TDS<1500 ppm

Ser No 1473-1500 Blank


Page 81 of 117

SECTION-3

REFRIGERATION, AIR-CONDITIONING , REFRIGERATORS

&

CENTRAL HEATING SYSTEM

(ITEM NO 1501 to 1584)


Page 82 of 117


SECTION-3 REFRIGERATION, AIR-CONDITIONING , REFRIGERATORS

& CENTRAL HEATING SYSTEM

(ITEM NO 1501 to 1584)

REFRIGERATORS

1501 Supply and fix refrigerator, electric driven (single phase), capacity upto to 195 Litres .BEE 5 star rated

Each 18,382

1502 Supply and fix refrigerator, electric driven (single phase), capacity more than 195 Litres upto to 310 Litres.BEE 5 star rated

Each 26,609

1503

Supply and fix refrigerators, electric driven (single phase), capacity more than 310 Litres upto to 360 Litres .BEE 5 star rated

Each 41,527

1504 Supply and fix refrigerator, electric driven (single phase), capacity more than 360 Litres upto to 460 Litres .BEE 5 star rated

Each 65,501

WATER COOLER

1505

Supply and fix water cooler electric driven (single phase), having approx storage capacity of 40 litre and nominal cooling capacity of 40 Litres per hour.

Each 34,322

1506


Each 38,819

1507


Each 46,478

1508

Supply and fix water cooler electric driven (single phase), having approx storage capacity of 180 litres and nominal cooling capacity of 150 Litres per hour.

Each 57,524


Page 83 of 117


DEEP FREEZER

1509 Deep freezer hard top up to 320 litre capacity having single door.

Each 29,191

1510 Deep freezer glass top up to 320 litre capacity having single door.

Each 31,222

1511 Deep freezer hard top more than 320 litre and up to 400 Litre capacity having double door.

Each 32,682

1512 Deep freezer glass top more than 320 litre and up to 400 Litre capacity having double door.

Each 37,475

EVAPORATIVE COOLER (DESERT COOLER)

1513

Supply and fix desert cooler electric driven (single phase), having nominal air flow capacity of 4000 CuM per hour (or nearest size).Plastic/PVC Body

Each 11,141

1514

Supply and fix desert cooler electric driven (single phase), having nominal air flow capacity of 5000 CuM per hour (or nearest size).Plastic/PVC Body

Each 11,448

1515

Supply and fix desert cooler electric driven (single phase), having nominal air flow capacity of 4000 CuM per hour (or nearest size).Steel body

Each 7,734

1516

Supply and fix desert cooler electric driven (single phase), having nominal air flow capacity of 5000 CuM per hour (or nearest size).(Steel body)

Each 8,211

1517

Supply and fix desert cooler electric driven (single phase), having nominal air flow capacity of 6000 CuM per hour (or nearest size).(*Steel body)

Each 8,697

WINDOW AIR CONDITIONER

1518

Supply and fix room window type air conditioner electric driven (single phase), cooling capacity 4500 K Cal per hour ( 1.5 Ton).BEE 5 star rated

Each 42,194

1519

Supply and fix room window type air conditioner electric driven (single phase),cooling capacity 6000 K Cal per hour ( 2 Ton).BEE 5 star rated

Each 45,018


Page 84 of 117


1520 Add Rs 2000/- for cooling and heating type window A/Cs

Note:Window a/cs rate include th cost of wiring and switches etc

SPLIT AIR CONDITIONER

1521 Supply and fix air cooled split unit air conditioner electric driven, single phase of capacity of 1.5 TR, BEE 5 star rated

Each 46,796

1522 Supply and fix air cooled split unit air conditioner electric driven single phase of capacity of 2 TR, BEE 5 star rated

Each 54,530

1523 Add Rs 4000/- for cooling and heating type split A/Cs

Note:Split a/c rate include th cost of wiring and switches etc

AIR CONDITIONER CASSETTEE TYPE

1524 Supply and fix air cooled air conditioner electric driven, single phase of capacity of 2.0 TO 2.5 TR

Each 83,498

1525 Supply and fix air cooled air conditioner electric driven, single phase of capacity of 3.0 TO 3.5TR

Each 1,05,504

1526 Supply and fix air cooled air conditioner electric driven, single phase of capacity of 4.0 TO 5.0TR

Each 1,35,213

PACKAGE TYPE AIR CONDITIONING

1527

Supply and fix air conditioner package type suitable for operational on three phase AC electric supply, including water pump sets, cooling tower, ducting plumbing and electric connection, capacity 15000 K. cal Per hour (5 ton).

Each 5,72,167

1528

Supply and fix air conditioner package type suitable for operational on three phase AC electric supply, including water pump Sets, cooling tower, ducting plumbing and electric connection, capacity 22500 K cal Per hour (7.5 ton) or nearest size.

Each 6,27,183


Page 85 of 117


1529

Supply and fix air conditioner package type suitable for operational on three phase AC electric supply, including water pump Sets cooling towers, ducting plumbing and Electric connection, capacity 30000 K. Cal Per hour (10 ton) or nearest size.

Each 7,04,205

1530

Supply and fix air conditioners package type including heating arrangement suitable for operational on three phase AC electric supply, including water pump Sets cooling tower, ducting plumbing and Electric connection, with strip heater capacity 15000 K. Cal Per hour (5 ton) or nearest size.

Each 7,59,221

1531

Supply and fix air conditioner package type including heating arrangement suitable for operational on three phase AC electric supply, including water pump sets, cooling tower, ducting plumbing and Electric connection, with strip heater capacity 22500 K cal Per hour (7.5 ton) or nearest size.

Each 8,03,234

1532

Supply and fix air conditioner package type including heating arrangement suitable for operational on three phase AC electric supply, including water pump sets, cooling towers, ducting plumbing and electric connection, with strip heater capacity 30000 K cal Per hour (10 ton) or nearest size.

Each 8,47,247

CENTRAL AIR CONDITIONING PLANTS

1533

Supply and fix central air conditioning installations including AHUs, water pump sets, cooling towers, ducting and electrical connection suitable for 3 phase, AC supply direct expansion system capacity up to 10 Ton.

Per TR 1,02,309

1534

Supply and fix central air conditioning installations including AHUs,water pump sets cooling towers, ducting and electrical connection suitable for 3 phase, AC supply direct expansion system of capacity 11 to 20 TR

Per TR 93,274


Page 86 of 117


1535

Supply and fix central air conditioning installations including AHUs,water pump sets, cooling towers, ducting and electrical connection suitable for 3 phase, AC supply direct expansion system of capacity 21 to 40 TR

Per TR 91,623

1536

Supply and fix central air conditioning installations including AHUs, water pump sets cooling towers, ducting and electrical connection suitable for 3 phase, AC supply direct expansion system of capacity above 40 TR

Per TR 87,518

1537

Supply and fix central air conditioning installations including AHUs,water pump sets cooling towers, ducting and electrical connection suitable for 3 phase, AC supply chilled water system of capacity upto 40 TR

Per TR 1,06,617

1538

Supply and fix central air conditioning installations including AHUs, water pump sets, cooling towers, ducting and electrical connection suitable for 3 phase, AC supply chilled water system of capacity above 40 Ton and upto 100 TR

Per TR 94,908

1539

Supply and fix central air conditioning installations including AHUs,water pump sets, cooling towers, ducting and electrical connection suitable for 3 phase, AC supply chilled water system of capacity above 100 TR

Per TR 93,059

1540 Add for provisions of winter heating and humidification

Per TR Add 7.5%

1541 In case A/C by VRV/VRF tech per TR Rates of DX type to be adopted

PRECISION AIR CONDITIONING

1542 Supply and fix precision air conditioner capacity 21000 K cal Per hour (7 ton)

Per Job 17,98,082


Per Job 21,25,501


Per Job 48,91,505


Page 87 of 117



Per Job 57,48,850

AIR CURTAIN

1546 Supply & fix air curtain 3 ft Each 13,294




1550 Supply and fix air curtain sensor Each 3,693

CHEMICAL DEHUMIDIFIERS

1551

Supply and fix chemical dehumidifier continuous operating complete, with heaters, ducting, electrical connection for 100 Cfm capacity

Each 1,64,086

1552 do -- but for capacity 180 Cfm Each 2,14,023





CENTRAL HEATING SYSTEM (Oil fired)

1557 S&F Central heating system of 25000 kcal/ Hr

Job 11,58,352

1558 -do- but 50000 (Kcal/Hr) Job 19,11,066

1559 -do- but 100000 (Kcal/Hr) Job 38,92,118

1560 -do- but 150000 (Kcal/Hr) Job 50,64,752

1561 -do- but 200000 (Kcal/Hr) Job 66,10,173

1562 -do- but 250000 (Kcal/Hr) Job 81,25,599

1563 -do- but 300000 (Kcal/Hr) Job 96,22,458

1564 -do- but 350000 (Kcal/Hr) Job 1,13,16,421

1565 -do- but 400000 (Kcal/Hr) Job 1,16,93,863

1566 -do- but 450000 (Kcal/Hr) Job 1,23,14,803

1567 -do- but 500000 (Kcal/Hr) Job 1,36,83,114

1568 -do- but 600000 (Kcal/Hr) Job 1,88,49,276

1569 -do- but 800000 (Kcal/Hr) Job 2,52,49,488

1570 -do- but1000000 (Kcal/Hr) Job 3,19,13,936

Note:Item 1557-1576 Rates includes all items of CHS viz boiler,piping,pumps(W+S),heat exchanger ,insulation,FCU, ducts, foundations etc, except cost of stand by boiler which is to be added seprately

BOILER(OIL FIRED) (1571 to 1584)

1571 S&F Boilers of Sizes 25000 (Kcal/Hr) Each 3,33,765

1572 -do- but sizes 50000 (Kcal/Hr) Each 5,03,027



Page 88 of 117













Ser No 1585-2000 Blank


Page 89 of 117

SECTION-4

TOOLS & PLANTS

(Item No 2201 to 2322)


Page 90 of 117


SECTION-4 TOOLS & PLANTS

(Item No 2201 to 2322)

ALUMINUM LADDER

2201 Self supporting cum extendable Aluminium Ladder of 12 feet extendable upto 21 feet.

Each 22,286

2202 Self supporting cum extendable Aluminium Ladder of 18 feet extendable upto 32 feet.

Each 34,717

2203 Normal Aluminium ladder of 12 feet Each 7,823

2204 Wall supported extendable aluminium ladder 12 feet extendable upto 12 feet

Each 12,337

2205 Wall supported extendable aluminium ladder 16 feet extendable upto 30 feet

Each 15,899

CRIMPING TOOLS

2206 Wire Stripper Each 329

2207 Cable cutter upto 10 Sqmm Each 670

2208 Pliers 1.5 Sqmm to 6 Sqmm Each 1,409

2209 Crimping pliers to crimp the end sealing ferrules from 0.5 to 16 Sqmm

Each 1,767

2210 Crimping pliers to crimp the end sealing ferrules from 0.5 to 16 Sqmm

Each 2,588

2211 Crimping pliers to crimp the end sealing ferrules from 16 to 50 Sqmm

Each 3,439


Each 7,593


Each 8,187


Each 33,353

DIGITAL METER

2215 AC Power clamp on meter to measure KWH, KVA, KVAR Voltage

Each 34,491

2216 Digital insulation resistance meter 1000V, 0 - 2000 M ohm

Each 9,097

2217 Motor operated insulation tester 500 V, upto 1000M Ohm with carrying case and HV testing leads.

Each 27,289


Page 91 of 117



Each 31,079


Each 50,534

2220 Earth resistance tester 0 to 2000 Ohm complete with 4 spikes 4 test leads, charging lead and carrying case

Each 28,006

OTHER METER

2221 Digital Tachometer (Contact & Non-contact type)

Each 5,299

2222 Digital Sound level meter Each 16,411

2223 Digital thermo hygro meter Each 1,573

2224 High voltage testing kit for testing of electrical installation 0-5KV

Each 63,673

2225 Electrical metal scanner to detect PVC conduit/metal pipes behind tiles/concrete

Each 3,033

2226 Circuit breaker finder kit locate break in power circuit

Each 3,651

2227 Digital lux meter for measurement of light upto 50,000 lux

Each 7,543

2228 AC/DC digital clamp meter, 1000A DC/ 800A AC

Each 10,772

2229 Digital temperature and humidity meter Each 13,645

2230 Digital millimetre AC Each 26,334

2231 Digital sound level meter Each 29,184

DRILL & BLOWER

2232 Electric operated drill for drilling in steel for 10 mm dia hole.

Each 12,068

2233 Electric operated blower for air volume 2.7 cu meter/min

Each 8,831

COMMON HAND TOOLS

2234 Adjustable spanner of length 155mm confirming to IS-6149

Each 284


Each 480


Each 631


Each 1,266

2238 Combination Pliers of 165 mm confirming to IS-3650

Each 323


Page 92 of 117



Each 342


Each 372

2241 Water pump plier of 200 mm confirming to IS-6118

Each 408

2242 Water pump plier of 250 mm confirming to IS-6118

Each 448

2243 Nose plier of 165 mm confirming to IS-3552 Each 326

2244 Side cutting plier of 165 mm Each 297

2245 Screw driver of 100 mm confirming to IS-844

Each 60


Each 92


Each 103


Each 133


Each 185

2250 Pipe wrench 250 mm confirming to IS-4003 Each 591

2251 Pipe wrench 300 mm confirming to IS-4003 Each 792

2252 Pipe wrench 450 mm confirming to IS-4003 Each 1,722

2253 Chain pipe wrench of size 4 confirming to IS-4123

Each 5,935


Each 8,290


Each 12,104

2256 Pipe vice of size 2 confirming to IS-6007 Each 3,578

2257 Pipe vice of size 4 confirming to IS-6008 Each 6,307

2258 Hammer with handle (Ball pein and cross pein) of 200 gms weight confirming to IS-841

Each 262


Each 351


Each 398

2261 Clave hammer with handle of 340 grm weight

Each 422

2262 Clave hammer with handle of 450 grm weight

Each 454


Page 93 of 117


2263 Double ended spanner (Plain) confirming to IS-2028 of size 6 x7 mm

Each 34


Each 33


Each 32


Each 34


Each 35


Each 37


Each 45


Each 54


Each 47


Each 61

2273 Double ended spanner (Plain) confirming to IS-2028 of size 16 x 17 mm

Each 61


Each 74


Each 79


Each 82


Each 104


Each 131


Each 135


Each 147


Each 191


Each 196

2283 Ring spanner confirming to IS-2029 of size 6 x 7 mm

Each 71


Page 94 of 117



Each 79


Each 96


Each 101


Each 115


Each 133


Each 164


Each 194


Each 231


Each 292


Each 339


Each 423

2295 Allen Keys of size 4 mm Each 17






CENTRIFUGE MACHINE FOR TRANSFORMER OIL

2301 Centrifuge machine complete with filter Heater, pump suitable for 230 V AC supply for capacity 250 Litre/hr.

Each 3,63,845

2302 -do- but for capacity 500 Litre/hr. Each 3,94,165

2303 -do- but suitable for three phase supply 415 Volts and for capacity 1250 Litre/hr.

Each 5,21,284

2304 -d0- but suitable for three phase supply 415 Volts and for capacity 2000 Litre/hr.

Each 6,32,635

DISCHARGE ROD

2305 Wooden discharge rod PVC Coated suitable for 11 KV

Each 6,065

2306 -do- but for 33 KV Each 7,581

2307 Fibre glass discharged rod for 11 KV Each 17,435


Page 95 of 117


2308 -do- but for 33 KV Each 23,499

2309 Telestone type fibre glass discharge rod Each 33,353

CABLE FAULT LOCATING MACHINE

2310

Cable fault locating instrument suitable to locate and pin point faults in LT Cables to 33 KV cables including following instruments:- (i) Impulse generator 0-33 KV. (ii) Acoustic fault locator to pin point the fault exactly at fault point (iii) Reflectometer (Laptop based) TDR set =input wave capturing (iv) High voltage Murray loop for % distance to constant leakage faults

Each 13,46,419

2311 Route tracing instrument to trace the route of buried cable

Each 2,31,698

WATER SUPPLY

2312 Chlorine gas mask with jumbo canister Each 10,613

2313 Air breathing apparatus with cylinder for 30 min. duration

Each 58,216

2314 Emergency safety kit to stop leakage of chlorine gas from cylinder

Each 45,102

2315 Rubber/PVC hand gloves to handle chlorine gas/liquid

Each 455

2316 Rubber/PVC gum boots to handle chlorine gas/liquid

Each 2,275

2317 Chlorine gas leakage detector with sensor and alarm

Each 1,02,332

2318 New empty 100 Kgs capacity chlorine cylinder fitted with valves and valve guard

Each 46,997

2319 Chlorine test kit with coloured ample complete with all testing fitments and OT solution in Rexene finished box

Each 2,411

2320

PH test kit with coloured ample covered under BTB (range 6.0 to 7.0) or phenol red (range 6.8 to 8.4) with necessary fitments and 100 ml testing solution in Rexene finished box

Each 3,033

2321 Iron test kit Each 3,942

SWIMMING POOL


Page 96 of 117


2322 Suction Sweeper complete with motor, pump & starter, mounted on trolley including nylon rope, hose pipe float etc complete.

Each 1,09,002


Page 97 of 117

SECTION-5 SEWAGE COLLECTION, TREATMENT, DISPOSAL & REUSE

(Item No 3001 to 3185)


Page 98 of 117

5. PUBLIC HEALTH ENGINEERING

5.1 GRAVITY SEWERS (Item No 3001 to 3040)

RCC NP3 150 mm diameter Pipes laid on150 mm thick bed with excavation in any type of soil, including manholes/drop manhole of standard size made of Brick masonry/ RCC/Precast RCC with SFRC ventilating cover and frame. Includes all items and activities to execute and make sewer line functional.

Item No

For depth UNIT AMOUNT (Rupees)

TYPE OF BEDDING

(Type of Bedding to be decided by designer)

150 mm th. Moorum /Sand / Crushed stone

150 mm th. PCC Cradle

150 mm th. RCC Cradle with 0.4%

reinforcement

150 mm th. RCC Arch with 1% reinforcement PCC 1:4:8

3001 0.70m – 1.65 m RM 928 1,332 1,358 1,945

3002 1.65 – 2.30 m RM 1,492 1,896 1,921 2,381

3003 2.30 – 4.50 m RM 2,616 2,997 3,023 3,481

3004 4.50 m – 6.0 m RM 4,299 4,654 4,787 5,139

DWCPE (SN8) 180 (OD)/163(ID) mm diameter Pipes laid on 150 mm thick bed with excavation in any type of soil, including manholes/drop manhole of standard size made of Brick masonry/ RCC/Precast RCC with SFRC ventilating cover and frame. Includes all items and activities to execute and make sewer line functional.

3005 0.70m – 1.65 m RM 1,224 As per IS 16098 (Part 2) : 2013 para A-4.1.2.4(a) any form of cement concrete structural bedding would not be necessary under normal conditions, even for maximum combined loading (wheel load + backfill). However designer may check requirement for special cases.

3006 1.65 – 2.30 m RM 1,788

3007 2.30 – 4.50 m RM 2,913

3008 4.50 m – 6.0 m RM 4,594


Page 99 of 117

RCC NP3 200 mm diameter Pipes laid on 150 mm thick bed with excavation in any type of soil, including manholes/drop manhole of standard size made of Brick masonry/ RCC/Precast RCC with SFRC ventilating cover and frame. Includes all items and activities to execute and make sewer line functional.

AMOUNT (Rs)

ITEM NO

FOR DEPTH UNIT

TYPE OF BEDDING


150 mm th. Moorum /Sand

/ Crushed stone

150 mm th. PCC Cradle PCC 1:4:8


reinforcement

150 mm th. RCC Arch with 1% reinforcement

3009 0.70m – 1.65 m RM 1,068 1,532 1,563 2,238

3010 1.65 – 2.30 m RM 1,631 2,074 2,101 2,604

3011 2.30 – 4.50 m RM 2,756 3,157 3,184 3,667

3012 4.50 m – 6.0 m RM 4,437 4,804 4,942 5,305

DWCPE(SN8) 200 (OD)/175(ID)mm diameter Pipes laid on 150 mm thick bed with excavation in any type of soil, including manholes/drop manhole of standard size made of Brick masonry/ RCC/Precast RCC with SFRC ventilating cover and frame. Includes all items and activities to execute and make sewer line functional.

3013 0.70m – 1.65 m RM 1,473 As per IS 16098 (Part 2) : 2013 para A-4.1.2.4(a) any form of cement concrete structural bedding would not be necessary under normal conditions, even for maximum combined loading (wheel load + backfill). However designer may check requirement for special cases

3014 1.65 – 2.30 m RM 2,037

3015 2.30 – 4.50 m RM 3,161

3016 4.50 m – 6.0 m RM 4,842


Page 100 of 117


AMOUNT (Rs)

ITEM NO

FOR DEPTH UNIT

TYPE OF BEDDING


150 mm th. Moorum /Sand /

Crushed stone



reinforcement


3017 0.70m – 1.65 m RM 1,233 1,638 1,805 2,584

3018 1.65 – 2.30 m RM 1,795 2,160 2,313 2,865

3019 2.30 – 4.50 m RM 2,921 3,262 3,375 3,886

3020 4.50 m – 6.0 m RM 4,602 4,927 5,126 5,502

DWCPE(SN8) 300(OD)/260(ID) mm diameter Pipes laid on 150 mm thick bed with excavation in any type of soil, including manholes/drop manhole of standard size made of Brick masonry/ RCC/Precast RCC with SFRC ventilating cover and frame. Includes all items and activities to execute and make sewer line functional.

3021 0.70m – 1.65 m RM 1,845 As per IS 16098 (Part 2) : 2013 para A-4.1.2.4(a) any form of cement concrete structural bedding would not be necessary under normal conditions, even for maximum combined loading (wheel load + backfill). However designer may check requirement for special cases.

3022 1.65 – 2.30 m RM 2,409

3023 2.30 – 4.50 m RM 3,534

3024 4.50 m – 6.0 m RM 5,216


Page 101 of 117


AMOUNT (RS)

FOR DEPTH

TYPE OF BEDDING


ITEM NO

150 mm th. Moorum /Sand

/ Crushed stone



reinforcement


3025 0.70m – 1.65 m RM 1,410 2,025 2,065 2,956

3026 1.65 – 2.30 m RM 1,973 2,507 2,541 3,149

3027 2.30 – 4.50 m RM 3,099 3,550 3,580 4,123

3028 4.50 m – 6.0 m RM 4,780 5,176 5,324 5,714


3029 0.70m – 1.65 m RM 1,981 2,843 2,900 3,833

3030 1.65 – 2.30 m RM 2,544 3,234 3,278 4,061

3031 2.30 – 4.50 m RM 3,669 4,203 4,239 4,882

3032 4.50 m – 6.0 m RM 5,350 5,793 5,959 6,396


Page 102 of 117


AMOUNT (Rs)

ITEM NO

FOR DEPTH UNIT

TYPE OF BEDDING


150 mm th. Moorum /Sand / Crushed

stone



reinforcement

150 mm th. RCC Arch with 1%

reinforcement

3033 0.70m – 1.65 m RM 2,171 3,117 3,178 4,233

3034 1.65 – 2.30 m RM 2,734 3,474 3,521 4,362

3035 2.30 – 4.50 m RM 3,860 4,421 4,458 5,134

3036 4.50 m – 6.0 m RM 5,541 5,999 6,170 6,623


3037 0.70m – 1.65 m RM 2,367 3,397 3,465 4,537

3038 1.65 – 2.30 m RM 2,931 3,724 3,775 4,676

3039 2.30 – 4.50 m RM 4,055 4,646 4,685 5,395

3040 4.50 m – 6.0 m RM 5,738 6,212 6,390 6,859

Notes for Sewers (3001 to 3040)

(a) Add extra percentage for exc. In soft rock – 15% and In hard rock –45 % (b) Add extra for pipes laid under sub-soil water conditions and/or in soils of treacherous nature,

by 6% for timbering, dewatering of trenches etc.

(c) Estimates include 4 MH per 100RM.


Page 103 of 117

SEPTIC TANKS AND SHALLOW SEWER. (3051 to 3065)

RCC HUME PIPE SEPTIC TANKS

ITEM NO

On site Hume Pipe septic tank designed to carry sewage and sullage water, excavation in any type of soil, PCC 1:4:8 below foundation, Vent shaft, connection etc., complete for

ITEM UNIT AMOUNT (Rupees)

3051 05 users. Each 15,870

3052 10 users. Each 26,450

LLDPE SEPTIC TANKS

ITEM NO


On site LLDPE septic tank designed to carry sewage and sullage water, excavation in any type of soil, PCC 1:4:8 below foundation, Vent shaft, connection etc., complete for

CODE ITEM UNIT

AMOUNT (Rupees)

CONVENTIONAL With UPFLOW FILTER

INLCUDING MEDIA

3053 05 users. Each 23,299 28,023

3054 10 users. Each 41,813 50,176

3055 20 users. Each 79,438 95,325

3056 25 users. Each 1,01,162 1,21,394

3057 30 users. Each 1,22,854 1,47,423


Page 104 of 117

RCC SEPTIC TANK

ITEM NO


CONVENTIONAL With UPFLOW FILTER

RCC Septic tank designed to carry sewage and sullage water, excavation in any type of soil, PCC 1:4:8 below foundation, RCC M-30 Design Mix in Walls , Base Slab , Baffle walls and Roof Slab including beams etc with Vent shaft , manhole openings with cover connection etc., complete with effective depth of 1.5 meter and overall depth of 3 meter for

3058 50 users. Each 6,30,627 7,56,752

3059 100 users. Each 8,90,449 10,68,539

3060 150 users. Each 11,08,650 13,30,379

Notes for 3051 to 3060):

(1) Effluent from septic tank to be taken to nearby manhole/Sump/STP through shallow sewers. If this option is not available then it is to be disposed off in soakage pits.

(2) Septage from septic tank is to be pumped out once in a year and disposed off safely in nearby STP / Oxidation pond / Sludge drying beds.

SHALLOW SEWERS

ITEM NO

ITEM UNIT AMOUNT (Rs)

RCC NP3 DWCPE (SN8)

100 mm diameter Pipes laid on 150 mm thick moorum/sand/crushed stone bed with excavation up to depth 1.65 m in any type of soil, including manholes of standard size made of Brick masonry/ RCC/Precast RCC with SFRC ventilating cover and frame. Includes all items and activities to execute and make sewer line functional.

3065 RM 690 660

Imp : for extra due to soil strata or high water table apply as per note for gravity sewers.


Page 105 of 117

SOAL WELL (3068 to 3082)

SOAKAGE WELL

Imp : Soak pits must to be constructed in pair for each septic tank but to be used alternately.

Soakage wells excavation, in any type of soil, foundation in PCC 1:3:6, walls of honey combed masonry with top ring of M25 concrete including intercepting chamber and screen chamber made of Brick masonary in CM, RCC cover slab in M25/ SFRC cover, interconnecting pipes of RCC/DWC complete filled with brick bats of size

ITEM NO

ITEM UNIT AMOUNT (Rs)

3068 1.2 M dia X 1.5 M effective depth Each 20,599

3069 1.2 M dia X 3 M effective depth Each 25,798








3077 3 M dia X 3.0 M effective depth Each 80,157

3078 3 M dia X 4.5 M effective depth Each 98,864

3079 3 M dia X 6.0 M effective depth Each 1,17,570


3081 3.6 M dia X 4.5 M effective depth Each 1,23,352

3082 3.6 M dia X 6.0 M effective depth Each 1,48,115


Page 106 of 117

SUMP WELL CUM PUMP HOUSES (3101 to 3133)

Designing (hydraulically, structurally and aesthetically), and constructing RCC sumps in M-30 mix of required capacity including excavation in all types of strata, foundation concrete, container walls, bottom slab, top RCC roof slab with CI manhole covers and with plaster and water proofing as per zonal specification including epoxy paint inside, refilling of earth and disposal of surplus earth within 50 m lead, including all piping connections, valves, internal electrification, MS ladder, ventilation shaft, BB chambers with 5m of outer wall of tank complete including test for water tightness and hydraulic functioning. Top room as per zonal specifications included.

ITEM NO Av Flow (Cum/d)

Overall Depth of sump (m)

IL of incoming sewer (m)

Inner Dia of sump well (m)

Amount (Rs)

3101 Upto 50 6 upto 4.0 2 2,87,076

3102 upto 50 7 4.0 - 5.0 2 3,25,675

3103 51 - 100 6.5 upto 4.0 2 3,06,375

3104 51 - 100 7 4.0 - 5.0 2 3,25,675

3105 101 - 200 7 upto 4.0 2 3,25,675

3106 101 - 200 7.5 4.0 - 5.0 2.5 4,21,800

3107 201 - 200 8 5.0 - 6.0 3 5,28,722

3108 201 - 300 7 upto 4.0 2.5 3,98,798

3109 201 - 300 8 4.0 - 5.0 2.5 4,45,108

3110 201- 300 8.5 5.0 - 6.0 3 5,55,732

3111 301 - 400 7 upto 4.0 3 4,75,007

3112 301 - 400 8 4.0 - 5.0 3 5,28,722

3113 301 - 400 8.5 5.0 - 6.0 3.5 6,46,134

3114 401 - 500 8 upto 4.0 3 5,28,722

3115 401 - 500 8.5 4.0 - 5.0 3 5,55,732


Page 107 of 117

ITEM NO Av Flow (Cum/d)

Overall Depth of sump (m)

IL of incoming sewer (m)

Inner Dia of sump well (m)

Amount (Rs)

3116 401 - 500 8.5 5.0 - 6.0 4 7,39,621

3117 501 - 600 8.5 upto 4.0 3 5,55,732

3118 501-600 8.5 4.0-5.0 3.50 6,46,134

3119 501 - 600 8.5 5.0 - 6.0 4.5 8,36,193

3120 601 - 800 8.5 upto 5.0 3.5 6,46,134

3121 601 - 800 8.5 5.0 - 6.0 4.5 8,36,193

3122 801 - 1000 8.5 upto 5.0 3.5 6,46,134

3123 801- 1000 8.5 5.0 - 6.0 4.5 8,36,193

3124 1001 - 1200 8.5 upto 5.0 4 7,39,621

3125 1001 - 1200 8.5 5.0 - 6.0 5 9,35,851

3126 1201 - 1400 8.5 upto 5.0 4 7,39,621

3127 1201 - 1400 8.5 5.0 - 6.0 5 9,35,851

3128 1401 - 1600 9 upto 5.0 4 7,74,037

3129 1401 - 1600 9 5.0 - 6.0 4.5 8,74,311

3130 1601 - 1800 9 upto 5.0 4 7,74,037

3131 1601 - 1800 9 5.0 - 6.0 5 9,77,671

3132 1801 - 2000 9 upto 5.0 4.5 8,74,311

3133 1801 - 2000 9 5.0 - 6.0 5.5 10,84,117

Note : For sump wells under sub-soil water conditions and/or in soils of treacherous nature, the rates of above items are to be increased by 6% for timbering, dewatering of trenches etc.


Page 108 of 117

SUBMERSIBLE PUMPS (Item No 3134 to 3155)

Non clog vertical submersible pumps with chrome steel impeller and cutter, non-clog to pass 40 mm size particles including Supply, installation with guide rail and lifting chain, cables, Earthing, testing complete with 2 years maintenance

ITEM NO

Duty (Flow and head) lpm x m

H.P. of Pump

Amount

CODE

Duty (Flow and head) lpm x m

H.P. of Pump

Amount

3134 50x25 1 22,265 3146 600x25 5 28,316

3135 75x25 1 22,265 3147 600x40 7.5 41,431

3136 100x25 1 24,081 3148 700x40 10 48,623

3137 125x25 3 24,081 3149 800x40 10 48,623

3138 150x25 3 24,081 3150 900x40 10 65,490

3139 175x25 3 24,081 3151 1000x40 15 74,162

3140 200x25 3 24,081 3152 1250x40 20 82,307

3141 250x25 3 24,081 3153 1500x40 20 89,952

3142 300x25 3 24,081 3154 2000x40 30 1,35,727

3143 350x25 3 28,316 3155 2500x40 35 1,51,162

3144 400x25 3 28,316

3145 500x25 5 28,,316


Page 109 of 117

5.6 Sewage Treatment Plant (MBBR Based). (Code 3171 to 3185)

MBBR BASED STPs

STP : PROCESS DESCRIPTION – MOVING BED BIO REACTOR (MBBR)

The Moving Media Bio Reactor Technology is a advanced biological treatment process which has a combination of activated

sludge process and attached growth process. The bio reactor has lot of packing material called carrier media in suspension

and provides a large surface area for micro organisms to grow and degrade the organic matter in aerobic condition. Due to

the use of carrier media, the higher concentration of bio mass is developed which helps to reduce the basin size, accept higher

loading rates and take shock loads.

The sewage after screening and grit removal flows by gravity into the BIO REACTOR wherein the attached growth, aerobic

microbes will utilize pollutant in presence of oxygen thereby, further reducing BOD. The air required will be provided through

coarse bubble air diffusers provided on the aeration grid at the bottom of reactor and using positive displacement, twin lobe,

root type air blower for supply of oxygen The PP media is provided in the aeration tank to allow the aerobic microbes to grow

and get attached. This media remains in fluid state in the aeration tank thereby keeping large number of microbial colonies

moving in the tank and provide high concentration of bio mass available at all the time. The microbes get exposed to bio

degradable organics in presence of oxygen and convert it into cell biomass, water molecule and carbon-dioxide. The microbial

colony grows on plastic media. The excess bio mass gets sloughed and moves with treated water into subsequent unit. This

sloughing action is a continuous process and the microbes keep on growing and sloughing. This is a very fast process and

hence system becomes self sustaining.

The dead bio mass generated will be separated in the CLARISETTLER TANK wherein tube media is provided for providing

additional surface area for settlement of bio mass and thereby reducing the space requirement. The solid-liquid separation is

achieved in this tank and clear supernatant will flow by gravity. The treated wastewater will be disinfected with Chlorine and

allowed to react in CHLORINE CONTACT TANK prior to suitable disposal.


Page 110 of 117

TYPICAL CHARACTERITICS OF SEWAGE

(Note : Raw sewage are indicative only, actual tests must be carried out at site.)

Raw Sewage Quality

(refer table below for variations)

Treated Sewage Quality

Parameter Value Parameter Without tertiary

treatment

With Tertiary

Treatment

Temperature

=>200C

Temperature

Ambient

Ambient

pH

6.5 – 8.5

pH

6.5 - 8.5

6.5 – 8.5

TSS

250 – 300 mg/L

TSS

< 30 mg/L

< 10 mg/L

BOD5 at 20ºC

200 - 300 mg/L

BOD5at 200C

< 20 mg/L

< 10mg/L

COD

350 – 450 mg/L

FC MPN < 1000/ 100 ML < 230/100 ML

Oil & Grease

20 – 30 mg/L

Helminths Egg

<= 1 egg/L

FC MPN Very high Nitrate as N

<= 10mg/L

Phosphorus as P < = 5 mg/L


Page 111 of 117

Actions for departure from standard Raw Sewage Characteristics

Temperature

pH

Total Suspended

Solids

BOD5 days at 20ºC

COD

Oil & Grease

MPN

< 200C

<6.5 or >8.5

>500mg/L

>400 mg/L

>600 mg/L

>30 mg/L

>107per 100 ML

Add 8% extra for every drop of 50C for heating

and insulation to keep sewage temp at 200C.

Any departure in pH requires detection and

isolation of source. To be treated separately.

Higher TSS shows ingress of surface runoff.

Additional capacity of Primary Settling Tank

required.

Higher BOD may be due to cattle farm/ butchery/

hospital. To be isolated and treated separately.

Higher COD may be due to industrial pollutants, to

be isolated and treated separately.

Higher oil & grease may be due to vehicle wash or

large kitchen waste. Additional Oil & Grease at

source required.

May be due to butchery/ hospital. To be isolated

and treated separately.


Page 112 of 117

STP (MBBR) 100 to 600 Cum/day capacity

Designing (hydraulically, structurally & aesthetically), providing, constructing, hydraulic testing,

commissioning and giving satisfactory trials of STP consisting of Inlet chamber(RCC), Fine bar Screen

chamber(manual) RCC with steel screen, Oil & Grease Remover(RCC), Grit separator, Equalization Tank(

2 Tanks of 50% Capacity each), Air Grid for Equalization Tanks, Feed Pumps(2 No), Moving Bed Bio

Reactor(s) with plastic media (of appropriate density, size and quantity to keep very high MLSS > 15,000

mg/lit), Air Blowers for MBBR, Tube Settler assembly, Sludge Drying Bed of appropriate size, Chlorine

Dozing System, Chlorine contact tank, Foundation for all E/M equipments, Associated piping work with

required valves, gates, drains, pathways, Electrical control Panel with interconnecting cable, spare parts for

2 years of operation, etc. complete as turnkey job with all involved civil, electrical, digital and mechanical

works as per detailed specifications for civil, electrical and mechanical components with all duties and taxes

complete. (Also refer imp notes below).

For tertiary treatment it also includes Filter Feed Tank of RCC, Filter Feed Pumps, Dual Media Filter,

Activated Carbon Filter, Treated water Tank in RCC. Treated sewage can be used for irrigation,

horticulture, fire fighting and MT wash.

ITEM NO Capacity (Cum/day)

Equivalent population

Load (with 180 lpcd)

Land Area Required

(SM)

Rate (in Lakh)

with Tertiary Treatment

without Tertiary Treatment

3171 100 556 250 52.09 42.69

3172 200 1,111 250 61.55 50.46

3173 300 1,667 250 75.74 62.08

3174 400 2,222 300 90.26 73.99

3175 500 2,778 400 104.47 85.63

3176 600 3,333 400 118.26 96.93


Page 113 of 117

STP (MBBR)above 600 Cum/D and upto 2000 Cum/D Capacity


commissioning and giving satisfactory trials of STP consisting of Coarse Bar Screening Chamber

(RCC) with steel screen (manual), Receiving Sump RCC, Submersible Pumps in receiving sump,

Stilling Chamber in RCC, Fine bar Screen chamber(manual) RCC with steel screen, Oil & Grease

Remover(RCC), Grit separator, Equalization Tank( 2 Tanks of 50% Capacity each), Air Grid for

Equalization Tanks, Feed Pumps(2 No), Moving Bed Bio Reactor(s) with plastic media (of

appropriate density, size and quantity to keep very high MLSS > 15,000 mg/lit), Air Blowers for

MBBR(2 Nos), Tube Settler assembly, Sludge Pump screw type(2 Nos), Sludge dewatering

centrifuge, Sludge holding tank, Air Grid for Sludge holding, Chlorine Dozing System, Chlorine

contact tank, Foundation for all E/M equipments, associated piping work with required valves,

gates, drains, pathways, Electrical control Panel with interconnecting cable, spare parts for 2

years of operation, etc. complete as turnkey job with all involved civil, electrical, digital and

mechanical works as per detailed specifications for civil, electrical and mechanical components

with all duties and taxes complete. (Also refer imp notes below).

For tertiary treatment it also includes Filter Feed Tank of RCC, Filter Feed Pumps, Dual Media

Filter, Activated Carbon Filter, Treated water Tank in RCC. Treated sewage can also be used

for irrigation, horticulture, fire fighting and MT wash.


Equivalent population Load (with 180 lpcd)

Land Area Required

(SM)

Rate (in Lakh)



3177 700 3,889 500 127.32 107.89

3178 800 4,445 500 139.89 118.55

3179 1000 5,556 600 164.04 139.02

3180 2000 11,111 750 271.41 230.01


Page 114 of 117

STP (MBBR)above 2000 Cum/D


commissioning and giving satisfactory trials of STP consisting of Coarse Bar Screening Chamber

(RCC) with steel screen (manual), Receiving Sump RCC, Submersible Pumps in receiving sump,

Stilling Chamber in RCC, Fine bar Screen chamber(manual) RCC with steel screen, Oil & Grease

Remover(RCC), Grit separator, Equalization Tank( 2 Tanks of 50% Capacity each), Air Grid for

Equalization Tanks, Feed Pumps(2 No), Moving Bed Bio Reactor(s) with plastic media (of

appropriate density, size and quantity to keep very high MLSS > 15,000 mg/lit), Air Blowers for

MBBR(2 Nos), Tube Settler assembly, Sludge Pump screw type(2 Nos), Sludge thickener

centrifuge/ drum type, Sludge holding tank, Air Grid for Sludge holding, Chlorine Dozing System,

Chlorine contact tank, Chlorinator room, Foundation for all E/M equipments, Associated piping

work with required valves, gates, drains, pathways, Electrical control Panel with interconnecting

cable, administration block cum laboratory, laboratory equipments, spare parts for 2 years of

operation, etc. complete as turnkey job with all involved civil, electrical, digital and mechanical as

per detailed specifications for civil, electrical and mechanical components with all duties and

taxes complete. (Also refer imp notes below)

For tertiary treatment it also includes Filter Feed Tank of RCC, Filter Feed Pumps, Dual Media

Filter, Activated Carbon Filter, Treated water Tank in RCC. Treated sewage can also be used

for irrigation, horticulture, fire fighting and MT wash.


Equivalent population Load (with 180 lpcd)

Land Area Required

(SM)

Rate (in Lakh)



3181 3000 16,667 900 352.82 309.50

3182 4000 22,222 1050 435.59 382.10

3183 5000 27,778 1200 512.89 449.90

3184 10000 55,556 2300 850.66 746.20

3185 20000 111,111 3900 1,406.33 1,233.62


Page 115 of 117

IMP NOTES FOR SEWAGE TREATMENT PLANTS

1. Peak factor considered for design for plants upto 3 MLD is 3; upto 15 MLD is 2.5 and upto 20

MLD is 2.0.

2. Upto 2 MLD capacity STP, chlorination is done by using sodium hypochlorite solution. Above 2

MLD capacity, gas chlorinator is provided.

3. Sludge thickener is not provided upto 3 MLD capacity STP. Sludge will be collected into sludge

sump and pumped directly to sludge dewatering system.

4. All water retaining structures are in M-30 grade of concrete.

5. Water table is considered 5 m below GL for design. Dewatering if required to be priced extra.

6. Soil bearing capacity is considered as 20 T/m² at 1.5 m below GL.

7. Lead for excavation is considered as 0.5 km within MD land.

8. Grade of cement used is OPC 43 grade. High Alumina Cement can also be used.

9. Grade of steel used is Fe 415.

10. Boundary wall, fencing, gate, storm water drains, approach roads, street lights, site clearance is

not considered in the scope.

11. Chemicals required during trial run and commissioning are not considered.

12. VAT has not been included in the rates.


Page 116 of 117

CONCEPTUAL FLOW CHART FOR MBBR BASED STP UPTO 2 MLD


Page 117 of 117

CONCEPTUAL FLOW CHART FOR MBBR BASED STP ABOVE 2 MLD

tele: 23018523 86435/misc/s2 ,/e4 (u3) engineer -4 data...tele: 23018523 86435/misc/s2_,/e4 (u3) v,...

Documents