tefc - pamensky canada 4 - definite purpose... · w22 nema brake motors - high efﬁciency tefc du...

101 www.pamensky.com

Definite Purpose Motors 4.1

W22 NEMA Brake Motors - High EfficiencyTEFC

D U T Y

Standard Features

• Motors are compliant with DOE and NRCAN• Three-phase, 2, 4, 6 and 8 pole, 60Hz• Voltage: 208-230/460V, 575V• Brake power supply: 220/230/240/460/575V• Totally Enclosed Fan Cooled - TEFC (IP55) waterproof as per

NEMA MG1 1.26.6 “Waterproof Machine”• Die cast aluminum squirrel cage rotor• Sealing (Drive End):

• V’Ring sealing up to frame 324/6T. • WSeal® (double lipped V’Ring with a metallic cap) for frame

364/5T and 404/5T.• Sealing (Non Drive End):

• Lip Seal• Ball bearings• 1045 heat treated and stress relieved carbon steel shaft up to

frame 364/5T and all 2 pole motors.• 4140 for 404/5T in 4, 6 and 8 pole motors.• Class “F” insulation for all frames. Temperature rise limited to

Class “B” (80K)• 575V rated motors have Spike Resistant WISE wire.

• Protects against IGBT voltage spikes up to 2200V. • Exceeds NEMA MG1 Part 31.4.4.2

• Insulation System:• Dip and Bake Insulation system with class “H” resin up to

frame 324/6T• CFRI Continuous Flow Resin Impregnation Insulation system

with class “H” resin for frame 364/5T and 404/5T.• NEMA design “B”• Service Factor: 1.25• Continuous duty (S1)• 104ºF (40ºC) ambient temperature• Altitude: 3300 ft (1000m)• Double Gasketed terminal box• Stainless steel nameplate with laser etching• Paint: Synthetic enamel alkyd resin base• Paint Plan:

• 207A - Frames 143T to 215T• 203A - Frames 254T to 404/5T

• Color: RAL 5009 - Blue • Fitted with closed rubber drain breathers• Regreasable bearings for frames 254/6T and up• All frames have dual mounting• Normally closed brake• Manual brake release up to frame 324/6T

Metric Brake Motors also available

Optional Features

• 50Hz• Special voltages• Special brake power supply voltages• Special shafts• Space heaters• Labyrinth taconite seal available for all ratings• Thermostats, Thermistors, RTD’s (PT100)• Additional terminal box• Drip cover (canopy) for shaft down applications• NEMA C & D flanges and Metric flanges for all ratings• Roller bearings• Special paint• Microswitch to monitor the air gap or brake opening (from frame 182T

and up)• Degree of protection: IP56, IP65, IP66• Forced ventilation• Encoders• No feet

Inverter Ratings

Frames Poles Constant Torque Variable Torque VFD

143/5T - 404/5TAll 12:1

1000:1Any

All 100:1* WEG

* Can only be achieved by a WEG VFD running in Sensorless VectorSee page 7.6 for details

http://www.pamensky.com

101www.pamensky.com

Definite Purpose Motors4.2

W22 NEMA Brake Motors - High EfficiencyTEFC - Purchasing Data

Rated OutputNEMA Frame List Price

List Price with ‘C’ Flange

List Price with ‘D’ Flange

Part NumberFull Load Current Full Load

Efficiency

Shipping Weight (lbs.)

Brake

Torque(ft.lb)

SizeHP RPM 460V 575V

1

3600 143/5T $716 $790 $874 BM000X02PW22 1.48 1.18 75.5 37.5 12.6 101800 143/5T 946 1,020 1,104 BM000X04PW22 1.65 1.32 82.5 40.8 13.7 101200 143/5T 1,315 1,389 1,473 BM000X06PW22 1.63 1.30 80.0 47.4 14.5 10900 182/4T 1,179 1,263 1,353 BM000X08PW22 2.05 1.64 74.0 101 38.4 14

1.5

3600 143/5T 1,033 1,107 1,191 BM001X02PW22 1.99 1.59 82.5 41.9 12.6 101800 143/5T 1,057 1,131 1,215 BM001X04PW22 2.11 1.69 84.0 44.1 13.7 101200 182/4T 1,474 1,558 1,648 BM001X06PW22 2.24 1.79 85.5 81.6 36.9 14900 182/4T 1,260 1,344 1,434 BM001X08PW22 2.72 2.18 77.0 108 38.4 14

2

3600 143/5T 1,069 1,143 1,227 BM002X02PW22 2.64 2.11 84.0 45.2 12.6 101800 143/5T 1,083 1,157 1,241 BM002X04PW22 2.80 2.24 84.0 46.3 13.7 101200 182/4T 1,589 1,673 1,763 BM002X06PW22 2.98 2.38 86.5 92.6 36.9 14900 213/5T 1,849 1,944 2,044 BM002X08PW22 3.46 2.77 82.5 161 79.7 16

3

3600 182/4T 1,499 1,583 1,673 BM003X02PW22 3.67 2.94 85.5 98.1 31.6 141800 182/4T 1,418 1,502 1,592 BM003X04PW22 4.05 3.24 87.5 97.0 34.4 141200 213/5T 1,978 2,073 2,173 BM003X06PW22 4.15 3.32 87.5 130 76.0 16900 213/5T 2,234 2,329 2,429 BM003X08PW22 4.33 3.46 84.0 179 79.7 16

5

3600 182/4T 1,596 1,680 1,770 BM005X02PW22 5.90 4.72 87.5 101 31.6 141800 182/4T 1,596 1,680 1,770 BM005X04PW22 6.63 5.30 87.5 106 34.4 141200 213/5T 2,227 2,322 2,422 BM005X06PW22 7.08 5.66 87.5 182 76.0 16900 254/6T 2,912 3,097 3,313 BM005X08PW22 7.76 6.21 85.5 284 148 18

7.5

3600 213/5T 2,419 2,514 2,614 BM007X02PW22 8.86 7.09 88.5 148 64.7 161800 213/5T 2,179 2,274 2,374 BM007X04PW22 9.31 7.45 89.5 159 70.5 161200 254/6T 3,206 3,391 3,607 BM007X06PW22 9.64 7.71 89.5 269 139 18900 254/6T 3,805 3,990 4,206 BM007X08PW22 11.5 9.20 85.5 318 148 18

10

3600 213/5T 2,718 2,813 2,913 BM010X02PW22 11.8 9.44 89.5 163 64.7 161800 213/5T 2,266 2,361 2,461 BM010X04PW22 12.5 10.0 89.5 174 70.5 161200 254/6T 3,527 3,712 3,928 BM010X06PW22 13.1 10.5 89.5 293 139 18900 284/6T 5,022 5,249 5,529 BM010X08PW22 13.0 10.4 88.5 437 215 20

15

3600 254/6T 3,295 3,480 3,696 BM015X02PW22 17.4 13.9 90.2 267 117 181800 254/6T 3,398 3,583 3,799 BM015X04PW22 17.8 14.2 91.0 269 129 181200 284/6T 4,885 5,112 5,392 BM015X06PW22 17.8 14.2 90.2 408 201 20900 284/6T 5,814 6,041 6,321 BM015X08PW22 19.0 15.2 88.5 481 215 20

20

3600 254/6T 4,000 4,185 4,401 BM020X02PW22 23.7 19.0 90.2 306 117 181800 254/6T 3,783 3,968 4,184 BM020X04PW22 24.3 19.4 91.0 304 129 181200 284/6T 5,573 5,800 6,080 BM020X06PW22 24.1 19.3 91.0 454 201 20900 324/6T 6,840 7,114 7,441 BM020X08PW22 28.4 22.7 89.5 542 325 25

25

3600 284/6TS 3,987 4,214 4,494 BM025X02PW22 29.0 23.2 91.0 408 168 201800 284/6T 3,798 4,025 4,305 BM025X04PW22 29.2 23.4 92.4 452 184 201200 324/6T 5,470 5,744 6,071 BM025X06PW22 30.5 24.4 91.7 538 302 25900 324/6T 7,081 7,355 7,682 BM025X08PW22 35.5 28.4 89.5 600 325 25

30

3600 284/6TS 4,374 4,601 4,881 BM030X02PW22 33.7 27.0 91.0 439 168 201800 284/6T 3,974 4,201 4,481 BM030X04PW22 34.3 27.4 92.4 483 184 201200 324/6T 6,158 6,432 6,759 BM030X06PW22 35.8 28.6 91.7 582 302 25900 364/5T 10,890 11,481 12,225 BM030X08PW22 37.0 29.6 91.0 875 325 25

40

3600 324/6TS 5,470 5,744 6,071 BM040X02PW22 46.1 36.9 91.7 516 - 251800 324/6T 4,880 5,154 5,481 BM040X04PW22 47.6 38.1 93.0 553 274 251200 364/5T 8,831 9,422 10,166 BM040X06PW22 47.1 37.7 93.0 869 302 25900 364/5T 11,038 11,629 12,373 BM040X08PW22 50.5 40.4 91.0 931 325 25

50

3600 324/6TS 5,965 6,239 6,566 BM050X02PW22 56.5 45.2 92.4 549 - 251800 324/6T 5,285 5,559 5,886 BM050X04PW22 58.1 46.5 93.0 602 274 251200 364/5T 9,684 10,275 11,019 BM050X06PW22 58.1 46.5 93.0 915 302 25900 404/5T 15,093 15,684 16,428 BM050X08PW22 61.0 48.8 91.7 992 325 25

60

3600 364/5TS 9,310 9,901 10,645 BM060X02PW22 67.5 54.0 93.0 807 - 251800 364/5T 8,860 9,451 10,195 BM060X04PW22 69.4 55.5 93.6 900 274 251200 404/5T 12,100 12,691 13,435 BM060X06PW22 70.2 56.2 93.6 1,111 302 25900 404/5T 17,757 18,348 19,092 BM060X08PW22 74.2 59.4 91.7 1,153 325 25

753600 364/5TS 10,782 11,373 12,117 BM075X02PW22 82.5 66.0 93.0 847 - 251800 364/5T 9,855 10,446 11,190 BM075X04PW22 84.3 67.4 94.1 946 274 251200 404/5T 12,906 13,497 14,241 BM075X06PW22 85.8 68.6 93.6 1,160 302 25

1003600 404/5TS 13,313 13,904 14,648 BM100X02PW22 112.0 89.6 93.6 1,008 - 251800 404/5T 12,497 13,088 13,832 BM100X04PW22 113.0 90.4 94.5 1,200 274 25

Flange: Replace ‘M’ with ‘C’ for C Flange Replace ‘M’ with ‘D’ for D FlangeVoltage: Replace ‘X’ with ‘4’ for 208-230/460V Replace ‘X’ with ‘5’ for 575V




W22 NEMA Brake Motors - High EfficiencyTEFC - Motor Electrical Data

Rated Output Full Load Speed (RPM)

NEMA Frame

Full Load Current (A)

Locked rotor current (Il/In)

Locked rotor torque

Breakdown torque

Locked rotor time (s)

Weight (lb)

Noise level

Service Factor

Efficiency (%) Power factor

HP kW 230V 460V 575V 50% 75% 100% 50% 75% 100%

1 0.75

3480 143/5T 2.96 1.48 1.18 7.0 230% 280% 13 37.5 68 1.25 72.0 75.5 75.5 0.69 0.79 0.841770 143/5T 3.30 1.65 1.32 8.5 280% 350% 13 40.8 51 1.25 78.5 82.5 82.5 0.48 0.60 0.691150 143/5T 3.26 1.63 1.30 5.7 250% 280% 23 47.4 49 1.25 75.5 80.0 80.0 0.50 0.63 0.72860 182/4T 4.10 2.05 1.64 5.0 200% 260% 49 101 50 1.25 68.0 72.0 74.0 0.41 0.52 0.62

1.5 1.1

3455 143/5T 3.98 1.99 1.59 6.8 250% 300% 13 41.9 68 1.25 78.5 82.5 82.5 0.68 0.78 0.841760 143/5T 4.22 2.11 1.69 9.0 250% 300% 14 44.1 51 1.25 80.0 82.5 84.0 0.57 0.70 0.781160 182/4T 4.48 2.24 1.79 6.0 200% 260% 55 81.6 52 1.25 81.5 84.0 85.5 0.53 0.65 0.72865 182/4T 5.44 2.72 2.18 4.7 200% 240% 37 108 50 1.25 74.0 75.5 77.0 0.44 0.58 0.66

2 1.5

3450 143/5T 5.28 2.64 2.11 7.4 250% 300% 16 45.2 68 1.25 81.5 84.0 84.0 0.69 0.80 0.851755 143/5T 5.60 2.80 2.24 7.0 240% 280% 11 46.3 51 1.25 82.5 84.0 84.0 0.59 0.71 0.801160 182/4T 5.96 2.98 2.38 6.0 210% 260% 47 92.6 52 1.25 84.0 86.5 86.5 0.54 0.66 0.73870 213/5T 6.92 3.46 2.77 6.6 240% 290% 43 161 52 1.25 78.5 81.5 82.5 0.47 0.53 0.66

3 2.2

3500 182/4T 7.34 3.67 2.94 7.2 200% 310% 28 98.1 69 1.25 82.5 85.5 85.5 0.76 0.84 0.881760 182/4T 8.10 4.05 3.24 7.5 220% 280% 18 97.0 56 1.25 86.5 87.5 87.5 0.61 0.72 0.781170 213/5T 8.30 4.15 3.32 6.1 180% 240% 76 130 55 1.25 84.0 86.5 87.5 0.56 0.68 0.74865 213/5T 8.66 4.33 3.46 7.1 200% 210% 30 179 52 1.25 82.5 84.0 84.0 0.59 0.70 0.76

5 3.7

3490 182/4T 11.8 5.90 4.72 7.3 200% 300% 27 101 69 1.25 85.5 87.5 87.5 0.78 0.86 0.891750 182/4T 13.3 6.63 5.30 6.8 190% 260% 14 106 56 1.25 86.5 87.5 87.5 0.60 0.72 0.801165 213/5T 14.2 7.08 5.66 6.4 210% 230% 35 182 55 1.25 86.5 87.5 87.5 0.55 0.67 0.75880 254/6T 15.5 7.76 6.21 5.5 200% 260% 33 284 54 1.25 82.5 84.0 85.5 0.48 0.61 0.70

7.5 5.5

3510 213/5T 17.7 8.86 7.09 6.7 210% 300% 18 148 72 1.25 87.5 88.5 88.5 0.75 0.84 0.881755 213/5T 18.6 9.31 7.45 6.5 210% 260% 13 159 58 1.25 88.5 89.5 89.5 0.66 0.77 0.831175 254/6T 19.3 9.64 7.71 6.1 200% 270% 23 269 59 1.25 87.5 88.5 89.5 0.62 0.74 0.80880 254/6T 23.0 11.5 9.20 5.5 200% 260% 25 318 54 1.25 82.5 85.5 85.5 0.48 0.62 0.70

10 7.5

3510 213/5T 23.6 11.8 9.44 6.6 200% 270% 19 163 72 1.25 88.5 89.5 89.5 0.79 0.87 0.901755 213/5T 25.0 12.5 10.0 6.5 200% 250% 12 174 58 1.25 89.5 89.5 89.5 0.68 0.80 0.841170 254/6T 26.2 13.1 10.5 6.0 200% 260% 20 293 59 1.25 88.5 89.5 89.5 0.63 0.75 0.80880 284/6T 26.0 13.0 10.4 5.7 200% 220% 30 437 54 1.25 87.5 88.5 88.5 0.67 0.77 0.82

15 11

3520 254/6T 34.8 17.4 13.9 6.2 200% 250% 18 267 72 1.25 89.5 90.2 90.2 0.78 0.86 0.881765 254/6T 35.6 17.8 14.2 6.0 230% 260% 15 269 64 1.25 90.2 91.0 91.0 0.68 0.80 0.841175 284/6T 35.6 17.8 14.2 6.0 220% 250% 17 408 59 1.25 90.2 90.2 90.2 0.72 0.81 0.86880 284/6T 38.0 19.0 15.2 5.7 200% 220% 22 481 54 1.25 87.5 88.5 88.5 0.68 0.78 0.82

20 15

3520 254/6T 47.4 23.7 19.0 6.0 200% 250% 15 306 72 1.25 90.2 90.2 90.2 0.78 0.85 0.881760 254/6T 48.6 24.3 19.4 6.0 200% 240% 14 304 64 1.25 90.2 91.0 91.0 0.72 0.81 0.851175 284/6T 48.2 24.1 19.3 6.1 210% 240% 16 454 59 1.25 90.2 91.0 91.0 0.73 0.82 0.86880 324/6T 56.8 28.4 22.7 5.0 200% 220% 24 542 56 1.25 87.5 89.5 89.5 0.55 0.67 0.74

25 18.5

3530 284/6TS 58.0 29.0 23.2 6.0 200% 240% 15 408 72 1.25 91.0 91.0 91.0 0.83 0.88 0.901760 284/6T 58.4 29.2 23.4 6.0 220% 240% 23 452 64 1.25 91.7 92.4 92.4 0.73 0.82 0.861175 324/6T 61.0 30.5 24.4 5.7 200% 240% 19 538 62 1.25 91.0 91.7 91.7 0.69 0.79 0.83880 324/6T 71.0 35.5 28.4 5.1 220% 230% 19 600 56 1.25 87.5 89.5 89.5 0.53 0.66 0.73

30 22

3530 284/6TS 67.4 33.7 27.0 6.0 200% 240% 14 439 72 1.25 91.0 91.0 91.0 0.82 0.88 0.901760 284/6T 68.6 34.3 27.4 6.0 230% 240% 19 483 64 1.25 92.4 93.0 92.4 0.74 0.83 0.871175 324/6T 71.6 35.8 28.6 5.8 200% 240% 18 582 62 1.25 91.0 91.7 91.7 0.69 0.79 0.84880 364/5T 74.0 37.0 29.6 6.0 160% 220% 17 875 60 1.25 91.0 91.7 91.0 0.67 0.77 0.82

40 30

3550 324/6TS 92.2 46.1 36.9 6.0 210% 230% 22 516 76 1.25 91.0 91.7 91.7 0.83 0.88 0.891770 324/6T 95.2 47.6 38.1 6.0 210% 240% 18 553 69 1.25 92.4 93.0 93.0 0.74 0.82 0.851180 364/5T 94.2 47.1 37.7 6.2 190% 230% 16 869 66 1.25 93.0 93.0 93.0 0.74 0.83 0.86880 364/5T 101.0 50.5 40.4 6.0 170% 220% 13 931 60 1.25 91.0 91.7 91.0 0.67 0.77 0.82

50 37

3555 324/6TS 113.0 56.5 45.2 6.2 230% 230% 18 549 76 1.25 91.7 92.4 92.4 0.83 0.88 0.891770 324/6T 116.2 58.1 46.5 6.0 220% 240% 15 602 69 1.25 93.0 93.6 93.0 0.74 0.82 0.861180 364/5T 116.2 58.1 46.5 6.2 190% 230% 15 915 66 1.25 93.0 93.0 93.0 0.75 0.83 0.86880 404/5T 122.0 61.0 48.8 6.2 170% 240% 12 992 60 1.25 91.7 91.7 91.7 0.70 0.79 0.83

60 45

3550 364/5TS 135.0 67.5 54.0 6.3 200% 240% 15 807 80 1.25 91.7 93.0 93.0 0.84 0.89 0.901770 364/5T 138.8 69.4 55.5 6.3 200% 230% 12 900 70 1.25 93.6 93.6 93.6 0.79 0.85 0.871180 404/5T 140.4 70.2 56.2 6.1 200% 230% 16 1,111 68 1.25 93.6 93.6 93.6 0.75 0.83 0.86880 404/5T 148.4 74.2 59.4 6.3 180% 250% 11 1,153 60 1.25 91.7 92.4 91.7 0.70 0.80 0.83

75 553550 364/5TS 165.0 82.5 66.0 6.4 200% 240% 14 847 80 1.25 93.0 93.0 93.0 0.86 0.89 0.901770 364/5T 168.6 84.3 67.4 6.3 210% 240% 10 946 70 1.25 94.1 94.1 94.1 0.79 0.85 0.871180 404/5T 171.6 85.8 68.6 6.1 200% 220% 13 1,160 68 1.25 93.6 93.6 93.6 0.76 0.84 0.86

100 753550 404/5TS 224.0 112.0 89.6 6.4 200% 240% 11 1,008 80 1.25 93.6 94.1 93.6 0.85 0.89 0.901775 404/5T 226.0 113.0 90.4 6.1 210% 240% 14 1,200 70 1.25 94.5 94.5 94.5 0.80 0.86 0.88


101www.pamensky.com


W22 NEMA Brake Motors - High EfficiencyTEFC - Brake Electrical Data

Rared voltage V

RMS [Vca]

Brake size Brake coil voltage [Vcc] Wave form

110

6 to 25

103Full

220-240 205

380-415 180

Half wave440-480 205

525-575 250

The W22 brake motor can be supplied with full, half wave or special bridge rectifiers.

Fast braking For fast braking, the bridge rectifier must be connected as shown.

N L1 L2 L3 BR - Bridge rectifier

M 3 ~

4

31

2 6

5

~

-

+

Normal braking The bridge rectifier of the brake coil can be supplied directly from the motor terminals, without interruption.

Braking system The W22 brake motor allows two braking system: normal braking or fast braking.


4

31

2 6

5

~

-

+

M 3 ~




W22 NEMA Brake Motors - High EfficiencyTEFC - Mechanical Data

Frames 143T to 215T

Frames 254T to 326T

Frame 364/5T and 404/5T


101www.pamensky.com


"C" FLANGE DIMENSIONS

NEMAFRAMES

BA AJ AK BDBF

BB BC AHNUMBER TAP SIZE

143/5TC 2.250 5.875 4.500 6.500

4

UNC 3/8"x16 0.1560.125

2.125182/4TC 2.750

7.250 8.500 8.875UNC 1/2"x13

0.250

2.625213/5TC 3.500

0.250

3.125254/6TC 4.250 3.75284/6TC

4.750 9.000 10.500 11.0314.375

284/6TSC 3.000324/6TC

5.250

11.000 12.500

13.583

UNC 5/8"x11

5.000324/6TSC 3.500364/5TC

5.87515.551 8

5.625364/5TSC 3.500404/5TC

6.6257.000

404/5TSC 4.000

"D" FLANGE DIMENSIONS

NEMAFRAMES

BA AJ AK BDBF

BBNUMBER TAP SIZE

143/5TD 2.25010.000 9.000 11.000

4

0.562

0.203

182/4TD 2.750213/5TD 3.500254/6TD 4.250

12.500 11.000 14.000

0.828

284/6TD4.750

284/6TSD324/6TD

5.25016.000 14.000

18.000324/6TSD364/5TD

5.875 17.716364/5TSD404/5TD

6.625 20.000 18.000 22.000 8404/5TSD

W22 NEMA Brake Motors - High EfficiencyTEFC - Mechanical Data

NEMAFRAMES

Hole H HB HH HK J K LL LM O P 2E 2F d1 Bearings Manual release

D.E. N.D.E. HD2 β

143/5T 0.344 1.727 4.750 2.733 1.437 - 5.961 4.215 7.122 7.047 5.500 4.000/5.000

A4

6205-ZZ 6204-ZZ 8.6979°

182/4T0.406

2.216 5.5003.117

1.6146.575 5.246

9.343 8.740 7.500 4.500/5.500 6207-ZZ 6206-ZZ 12.138

213/5T 2.966 7.000 1.772 2.165 10.841 10.669 8.500 5.500/7.000 6308-ZZ 6207-ZZ 14.659 10°

254/6T

0.531

3.061 9.250

3.976

2.539 2.559

7.815 7.480

12.598 12.953 10.000 8.252/10.000 6309-C3 6209-Z-C3 17.195 9°

284/6TS3.535 10.250 3.110 2.874 14.067 14.173 11.000 9.500/11.000 6311-C3 6211-Z-C3 19.563

10°284/6T

324/6TS0.657 4.811 11.250 4.705 3.189 3.189 9.055 8.661 15.953 15.827 12.500 10.500/12.000 6312-C3 6212-Z-C3 25.48

324/6T

364/5TS0.660 4.251 12.362

6.0243.150 4.138

10.591 11.26717.957 17.914 14.016 11.260/12.244

UNC 3/4”6314-C3

6314-C3 - -364/5T

404/5T 0.810 5.252 14.213 3.937 5.669 19.566 19.134 15.984 12.244/13.740 6316-C3

NEMAFRAMES

A AA AB B BA C D EV GShaft

U N-W ES R S

143/5T 6.457 NPT 3/4” 6.263 6.142 2.250 13.346 3.500

-

0.354 0.875 2.250 1.575 0.765 0.187

182/4T 8.661NPT 1”

7.513 6.969 2.750 15.860 4.500 0.394 1.125 2.750 1.969 0.984 0.250

213/5T 9.764 8.609 8.858 3.500 19.517 5.250 0.669 1.375 3.375 2.480 1.203 0.313

254/6T 12.126

NPT 1 1/2”

10.483 11.732 4.250 24.945 6.250 0.827 1.625 4.000 2.756 1.406 0.375

284/6TS13.780 11.073 13.071 4.750

26.5577.000 1.023

1.625 3.250 2.480 1.406 0.375

284/6T 27.929 1.875 4.622 3.149 1.594

0.500324/6TS

15.157 NPT 2” 12.575 14.567 5.25029.616

8.000 1.3001.875 3.750 2.756 1.594

324/6T 31.116 2.125 5.250 3.937 1.844

364/5TS17.165

NPT 3” 16.016

15.7605.875

32.2769.000 1.654 1.480

1.875 3.748 1.968 1.591

364/5T 15.512 34.251 2.375 5.874 4.330 2.019 0.625

404/5T 19.921 18.386 6.625 48.545 10.000 2.323 1.811 2.874 7.250 5.512 2.449 0.750




W22 NEMA Brake Motors - NEMA PremiumTEFC

D U T Y

Standard Features

• Motors are compliant with DOE and NRCAN• Three-phase, 2, 4, 6 and 8 pole, 60Hz• Voltage: 208-230/460V, 575V• Brake power supply: 220/230/240/460/575V• Totally Enclosed Fan Cooled - TEFC (IP55) waterproof as per

NEMA MG1 1.26.6 “Waterproof Machine”• Die cast aluminum squirrel cage rotor• Sealing (Drive End):

• V’Ring sealing up to frame 324/6T. • WSeal® (double lipped V’Ring with a metallic cap) for frame

364/5T and 404/5T.• Sealing (Non Drive End):

• Lip Seal• Ball bearings• 1045 heat treated and stress relieved carbon steel shaft up to

frame 364/5T and all 2 pole motors.• 4140 for 404/5T in 4, 6 and 8 pole motors.• Class “F” insulation for all frames. Temperature rise limited to

Class “B” (80K)• 575V rated motors have Spike Resistant WISE wire.


• Insulation System:• Dip and Bake Insulation system with class “H” resin up to

frame 324/6T• CFRI Continuous Flow Resin Impregnation Insulation system

with class “H” resin for frame 364/5T and 404/5T.• NEMA design “B”• Service Factor: 1.25• Continuous duty (S1)• 104ºF (40ºC) ambient temperature• Altitude: 3300 ft (1000m)• Double Gasketed terminal box• Stainless steel nameplate with laser etching• Paint: Synthetic enamel alkyd resin base• Paint Plan:

• 207A - Frames 143T to 215T• 203A - Frames 254T to 404/5T

• Color: RAL 5009 - Blue • Fitted with closed rubber drain breathers• Regreasable bearings for frames 254/6T and up• All frames have dual mounting• Normally closed brake• Manual brake release up to frame 324/6T

Super Premium Efficiency available upon request

Optional Features

• 50Hz• Special voltages• Special brake power supply voltages• Special shafts• Space heaters• Labyrinth taconite seal available for all ratings• Thermostats, Thermistors, RTD’s (PT100)• Additional terminal box• Drip cover (canopy) for shaft down applications• NEMA C & D flanges and Metric flanges for all ratings• Roller bearings• Special paint• Microswitch to monitor the air gap or brake opening (from frame 182T

and up)• Degree of protection: IP56, IP65, IP66• Forced ventilation• Encoders• No feet

Inverter Ratings

Frames Poles Constant Torque Variable Torque VFD

143/5T - 404/5TAll 20:1

1000:1Any

All 1000:1* WEG

* Can only be achieved by a WEG VFD running in Sensorless VectorSee page 7.6 for details


101www.pamensky.com


W22 NEMA Brake Motors - NEMA PremiumTEFC - Purchasing Data

Rated OutputNEMA Frame List Price

List Price with ‘C’ Flange

List Price with ‘D’ Flange

Part NumberFull Load Current Full Load

Efficiency


Brake

Torque(ft.lb)

SizeHP RPM 460V 575V

1

3600 143/5T $824 $898 $982 BM000X02NPW22 1.43 1.14 78.5 41.9 12.6 101800 143/5T 880 954 1,038 BM000X04NPW22 1.41 1.13 85.5 46.3 13.7 101200 143/5T 1,139 1,213 1,297 BM000X06NPW22 1.73 1.38 82.5 58.4 14.5 10900 182/4T 1,355 1,439 1,529 BM000X08NPW22 2.30 1.84 78.5 108 38.4 14

1.5

3600 143/5T 905 979 1,063 BM001X02NPW22 1.96 1.57 84.0 46.3 12.6 101800 143/5T 938 1,012 1,096 BM001X04NPW22 2.02 1.62 86.5 54 13.7 101200 182/4T 1,309 1,393 1,483 BM001X06NPW22 2.54 2.03 87.5 83.6 36.9 14900 182/4T 1,447 1,531 1,621 BM001X08NPW22 2.70 2.16 82.5 124 38.4 14

2

3600 143/5T 945 1,019 1,103 BM002X02NPW22 2.56 2.05 85.5 57.3 12.6 101800 143/5T 979 1,053 1,137 BM002X04NPW22 2.69 2.15 86.5 56.2 13.7 101200 182/4T 1,478 1,562 1,652 BM002X06NPW22 3.23 2.58 88.5 101 36.9 14900 213/5T 2,128 2,223 2,323 BM002X08NPW22 3.39 2.71 85.5 169 79.7 16

3

3600 182/4T 1,339 1,423 1,513 BM003X02NPW22 3.63 2.90 86.5 101 31.6 141800 182/4T 1,393 1,477 1,567 BM003X04NPW22 3.91 3.13 89.5 104 34.4 141200 213/5T 1,874 1,969 2,069 BM003X06NPW22 4.41 3.53 89.5 141 76.0 16900 213/5T 2,567 2,662 2,762 BM003X08NPW22 4.56 3.65 85.5 196 79.7 16

5

3600 182/4T 1,481 1,565 1,655 BM005X02NPW22 5.90 4.72 88.5 101 31.6 141800 182/4T 1,602 1,686 1,776 BM005X04NPW22 6.45 5.16 89.5 108 34.4 141200 213/5T 2,272 2,367 2,467 BM005X06NPW22 6.83 5.46 89.5 182 76.0 16900 254/6T 3,352 3,537 3,753 BM005X08NPW22 7.58 6.06 87.5 300 148 18

7.5

3600 213/5T 1,885 1,980 2,080 BM007X02NPW22 8.76 7.01 89.5 159 64.7 161800 213/5T 2,034 2,129 2,229 BM007X04NPW22 9.00 7.20 91.7 154 70.5 161200 254/6T 2,929 3,114 3,330 BM007X06NPW22 9.48 7.58 91.0 304 139 18900 254/6T 4,376 4,561 4,777 BM007X08NPW22 11.1 8.88 87.5 326 148 18

10

3600 213/5T 2,709 2,804 2,904 BM010X02NPW22 11.6 9.28 90.2 183 64.7 161800 213/5T 2,340 2,435 2,535 BM010X04NPW22 12.4 9.92 91.7 192 70.5 161200 254/6T 3,674 3,859 4,075 BM010X06NPW22 12.9 10.3 91.0 331 139 18900 284/6T 5,773 6,000 6,280 BM010X08NPW22 13.4 10.7 90.2 437 215 20

15

3600 254/6T 3,294 3,479 3,695 BM015X02NPW22 17.2 13.8 91.0 278 117 181800 254/6T 3,260 3,445 3,661 BM015X04NPW22 18.0 14.4 92.4 293 129 181200 284/6T 5,618 5,845 6,125 BM015X06NPW22 17.9 14.3 91.7 443 201 20900 284/6T 6,687 6,914 7,194 BM015X08NPW22 19.4 15.5 90.2 481 215 20

20

3600 254/6T 3,843 4,028 4,244 BM020X02NPW22 23.2 18.6 91.0 311 117 181800 254/6T 3,623 3,808 4,024 BM020X04NPW22 24.1 19.3 93.0 333 129 181200 284/6T 6,408 6,635 6,915 BM020X06NPW22 24.2 19.4 91.7 490 201 20900 324/6T 7,902 8,176 8,503 BM020X08NPW22 28.3 22.6 91.0 542 325 25

25

3600 284/6TS 4,586 4,813 5,093 BM025X02NPW22 28.5 22.8 91.7 426 168 201800 284/6T 4,369 4,596 4,876 BM025X04NPW22 29.5 23.6 93.6 452 184 201200 324/6T 6,289 6,563 6,890 BM025X06NPW22 30.4 24.3 93.0 650 302 25900 324/6T 8,143 8,417 8,744 BM025X08NPW22 35.9 28.7 91.0 600 325 25

30

3600 284/6TS 5,026 5,253 5,533 BM030X02NPW22 33.8 27.0 91.7 456 168 201800 284/6T 4,570 4,797 5,077 BM030X04NPW22 35.1 28.1 93.6 501 184 201200 324/6T 7,083 7,357 7,684 BM030X06NPW22 35.8 28.6 93.0 644 302 25900 364/5T 12,197 12,788 13,532 BM030X08NPW22 37.0 29.6 92.4 902 325 25

40

3600 324/6TS 6,289 6,563 6,890 BM040X02NPW22 45.8 36.6 92.4 547 - 251800 324/6T 5,612 5,886 6,213 BM040X04NPW22 47.1 37.7 94.1 582 274 251200 364/5T 9,891 10,482 11,226 BM040X06NPW22 46.5 37.2 94.1 933 302 25900 364/5T 12,361 12,952 13,696 BM040X08NPW22 50.0 40.0 92.4 975 325 25

50

3600 324/6TS 6,860 7,134 7,461 BM050X02NPW22 56.1 44.9 93.0 584 - 251800 324/6T 6,079 6,353 6,680 BM050X04NPW22 59.2 47.4 94.5 626 274 251200 364/5T 10,845 11,436 12,180 BM050X06NPW22 57.4 45.9 94.1 968 302 25900 404/5T 16,904 17,495 18,239 BM050X08NPW22 60.0 48.0 93.0 1,118 325 25

60

3600 364/5TS 10,429 11,020 11,764 BM060X02NPW22 67.0 53.6 93.6 825 - 251800 364/5T 9,923 10,514 11,258 BM060X04NPW22 68.3 54.6 95.0 968 274 251200 404/5T 13,552 14,143 14,887 BM060X06NPW22 69.5 55.6 94.5 1,142 302 25900 404/5T 19,890 20,481 21,225 BM060X08NPW22 73.0 58.4 93.0 1,217 325 25

753600 364/5TS 12,073 12,664 13,408 BM075X02NPW22 81.9 65.5 93.6 847 - 251800 364/5T 11,041 11,632 12,376 BM075X04NPW22 84.1 67.3 95.4 1,019 274 251200 404/5T 14,454 15,045 15,789 BM075X06NPW22 84.9 67.9 94.5 1,195 302 25

1003600 404/5TS 14,911 15,502 16,246 BM100X02NPW22 110 88.0 94.1 1,045 - 251800 404/5T 13,997 14,588 15,332 BM100X04NPW22 111 88.8 95.4 1,246 274 25

Flange: Replace ‘M’ with ‘C’ for C Flange Replace ‘M’ with ‘D’ for D FlangeVoltage: Replace ‘X’ with ‘4’ for 208-230/460V Replace ‘X’ with ‘5’ for 575V




W22 NEMA Brake Motors - NEMA PremiumTEFC - Motor Electrical Data


NEMA Frame



Locked rotor torque

Breakdown torque


Weight (lb)

Noise level

Service Factor


HP kW 230V 460V 575V 50% 75% 100% 50% 75% 100%

1 0.75

3495 143/5T 2.86 1.43 1.14 8.2 280% 340% 22 41.9 68 1.25 74.0 77.0 78.5 0.69 0.79 0.841760 143/5T 2.82 1.41 1.13 8.4 280% 350% 18 46.3 51 1.25 80.0 84.0 85.5 0.60 0.70 0.781150 143/5T 3.46 1.73 1.38 6.2 300% 300% 28 58.4 49 1.25 77.0 82.0 82.5 0.45 0.57 0.66875 182/4T 4.60 2.30 1.84 6.0 300% 350% 22 108 50 1.25 74.0 77.0 78.5 0.32 0.42 0.52

1.5 1.1

3490 143/5T 3.92 1.96 1.57 8.9 350% 380% 21 46.3 68 1.25 81.5 84.0 84.0 0.70 0.80 0.841755 143/5T 4.04 2.02 1.62 8.3 250% 340% 14 54 51 1.25 82.5 85.5 86.5 0.60 0.70 0.791165 182/4T 5.08 2.54 2.03 8.0 320% 400% 16 83.6 52 1.25 84.0 86.5 87.5 0.45 0.54 0.62860 182/4T 5.40 2.70 2.16 5.5 250% 260% 17 124 50 1.25 80.0 82.5 82.5 0.43 0.54 0.62

2 1.5

3480 143/5T 5.12 2.56 2.05 8.9 350% 380% 17 57.3 68 1.25 82.5 85.5 85.5 0.71 0.80 0.861750 143/5T 5.38 2.69 2.15 8.0 260% 300% 11 56.2 51 1.25 85.5 86.5 86.5 0.62 0.74 0.811165 182/4T 6.46 3.23 2.58 7.5 300% 300% 31 101 52 1.25 86.5 88.5 88.5 0.46 0.58 0.66870 213/5T 6.78 3.39 2.71 7.6 240% 290% 39 169 52 1.25 82.5 84.0 85.5 0.45 0.55 0.65

3 2.2

3510 182/4T 7.26 3.63 2.90 8.3 240% 380% 41 101 69 1.25 82.5 86.5 86.5 0.75 0.84 0.881760 182/4T 7.82 3.91 3.13 8.1 230% 340% 23 104 56 1.25 87.5 88.5 89.5 0.61 0.73 0.791170 213/5T 8.82 4.41 3.53 7.0 200% 280% 58 141 55 1.25 86.5 88.5 89.5 0.50 0.63 0.70865 213/5T 9.12 4.56 3.65 6.8 230% 280% 44 196 52 1.25 84.0 85.5 85.5 0.50 0.63 0.71

5 3.7

3500 182/4T 11.8 5.90 4.72 7.5 230% 350% 25 101 69 1.25 86.5 88.5 88.5 0.76 0.85 0.891755 182/4T 12.9 6.45 5.16 7.2 230% 320% 15 108 56 1.25 88.5 89.5 89.5 0.62 0.74 0.801170 213/5T 13.7 6.83 5.46 6.6 190% 240% 57 182 55 1.25 88.5 89.5 89.5 0.58 0.70 0.76880 254/6T 15.2 7.58 6.06 5.3 190% 250% 44 300 54 1.25 85.5 87.5 87.5 0.49 0.62 0.70

7.5 5.5

3520 213/5T 17.5 8.76 7.01 7.2 210% 300% 27 159 72 1.25 87.5 89.5 89.5 0.75 0.84 0.881765 213/5T 18.0 9.00 7.20 7.1 220% 310% 20 154 58 1.25 89.5 91.0 91.7 0.67 0.78 0.841175 254/6T 19.0 9.48 7.58 6.8 250% 300% 30 304 59 1.25 89.5 90.2 91.0 0.63 0.74 0.80880 254/6T 22.2 11.1 8.88 5.3 200% 250% 33 326 54 1.25 85.5 87.5 87.5 0.50 0.63 0.71

10 7.5

3515 213/5T 23.2 11.6 9.28 7.2 210% 290% 24 183 72 1.25 89.5 90.2 90.2 0.79 0.87 0.901760 213/5T 24.8 12.4 9.92 6.4 200% 300% 17 192 58 1.25 90.2 91.7 91.7 0.66 0.77 0.831175 254/6T 25.8 12.9 10.3 6.5 230% 280% 26 331 59 1.25 90.2 91.0 91.0 0.63 0.74 0.80880 284/6T 26.8 13.4 10.7 5.6 200% 240% 32 437 54 1.25 89.5 90.2 90.2 0.61 0.72 0.78

15 11

3530 254/6T 34.4 17.2 13.8 6.7 220% 270% 25 278 72 1.25 89.5 91.0 91.0 0.77 0.85 0.881765 254/6T 36.0 18.0 14.4 6.5 230% 270% 17 293 64 1.25 91.0 91.7 92.4 0.68 0.78 0.831175 284/6T 35.8 17.9 14.3 6.7 230% 270% 20 443 59 1.25 91.0 91.7 91.7 0.69 0.80 0.84880 284/6T 38.8 19.4 15.5 5.5 200% 230% 25 481 54 1.25 90.2 91.0 90.2 0.62 0.73 0.79

20 15

3520 254/6T 46.4 23.2 18.6 6.1 200% 240% 21 311 72 1.25 91.0 91.7 91.0 0.82 0.87 0.891765 254/6T 48.2 24.1 19.3 6.5 230% 270% 15 333 64 1.25 91.7 92.4 93.0 0.68 0.79 0.841175 284/6T 48.4 24.2 19.4 6.2 230% 260% 16 490 59 1.25 91.0 91.7 91.7 0.70 0.80 0.85880 324/6T 56.6 28.3 22.6 5.0 190% 220% 27 542 56 1.25 89.5 91.0 91.0 0.54 0.66 0.73

25 18.5

3535 284/6TS 57.0 28.5 22.8 6.3 200% 250% 17 426 72 1.25 91.0 91.7 91.7 0.82 0.87 0.891765 284/6T 59.0 29.5 23.6 6.2 240% 270% 24 452 64 1.25 92.4 93.0 93.6 0.70 0.80 0.841180 324/6T 60.8 30.4 24.3 6.2 210% 260% 26 650 62 1.25 91.7 93.0 93.0 0.65 0.77 0.82880 324/6T 71.8 35.9 28.7 5.2 200% 230% 23 600 56 1.25 89.5 91.0 91.0 0.51 0.64 0.71

30 22

3535 284/6TS 67.6 33.8 27.0 6.3 200% 250% 15 456 72 1.25 91.7 91.7 91.7 0.82 0.87 0.891765 284/6T 70.2 35.1 28.1 6.1 240% 240% 20 501 64 1.25 93.0 93.0 93.6 0.70 0.80 0.841180 324/6T 71.6 35.8 28.6 6.2 230% 260% 21 644 62 1.25 91.7 93.0 93.0 0.65 0.77 0.83880 364/5T 74.0 37.0 29.6 6.2 170% 240% 20 902 60 1.25 92.4 92.4 92.4 0.63 0.74 0.80

40 30

3555 324/6TS 91.6 45.8 36.6 6.4 230% 240% 22 547 74 1.25 91.7 92.4 92.4 0.82 0.87 0.891770 324/6T 94.2 47.1 37.7 6.1 220% 240% 20 582 66 1.25 93.6 94.1 94.1 0.72 0.80 0.851180 364/5T 93.0 46.5 37.2 6.4 200% 240% 21 933 66 1.25 93.6 93.6 94.1 0.73 0.82 0.86880 364/5T 100 50.0 40.0 6.0 170% 230% 18 975 60 1.25 92.4 93.0 92.4 0.66 0.76 0.81

50 37

3550 324/6TS 112 56.1 44.9 6.2 220% 230% 23 584 74 1.25 93.0 93.0 93.0 0.83 0.87 0.891775 324/6T 118 59.2 47.4 6.2 230% 270% 15 626 66 1.25 93.0 94.1 94.5 0.66 0.77 0.831180 364/5T 115 57.4 45.9 6.4 200% 240% 18 968 66 1.25 93.6 94.1 94.1 0.74 0.83 0.86880 404/5T 120 60.0 48.0 6.8 170% 260% 15 1,118 60 1.25 93.0 93.0 93.0 0.68 0.78 0.83

60 45

3560 364/5TS 134 67.0 53.6 6.6 200% 260% 14 825 79 1.25 91.7 93.0 93.6 0.81 0.88 0.901775 364/5T 137 68.3 54.6 6.6 240% 260% 15 968 67 1.25 94.1 94.5 95.0 0.75 0.83 0.871180 404/5T 139 69.5 55.6 6.4 200% 230% 20 1,142 68 1.25 94.1 94.5 94.5 0.74 0.82 0.86880 404/5T 146 73.0 58.4 6.5 180% 270% 13 1,217 60 1.25 93.0 93.0 93.0 0.68 0.78 0.83

75 553555 364/5TS 164 81.9 65.5 6.6 200% 260% 10 847 79 1.25 92.4 93.6 93.6 0.83 0.88 0.901775 364/5T 168 84.1 67.3 6.4 240% 260% 14 1,019 67 1.25 94.5 95.0 95.4 0.73 0.82 0.861180 404/5T 170 84.9 67.9 6.4 200% 230% 17 1,195 68 1.25 94.1 94.5 94.5 0.74 0.83 0.86

100 753555 404/5TS 220 110 88.0 6.5 200% 240% 14 1,045 79 1.25 93.0 94.1 94.1 0.85 0.90 0.911775 404/5T 222 111 88.8 7.3 240% 260% 13 1,246 68 1.25 95.0 95.0 95.4 0.77 0.84 0.88


101www.pamensky.com


W22 NEMA Brake Motors - NEMA PremiumTEFC - Brake Electrical Data

Rared voltage V

RMS [Vca]

Brake size Brake coil voltage [Vcc] Wave form

110

6 to 25

103Full

220-240 205

380-415 180

Half wave440-480 205

525-575 250

The W22 brake motor can be supplied with full, half wave or special bridge rectifiers.

Fast braking For fast braking, the bridge rectifier must be connected as shown.


M 3 ~

4

31

2 6

5

~

-

+

Normal braking The bridge rectifier of the brake coil can be supplied directly from the motor terminals, without interruption.

Braking system The W22 brake motor allows two braking system: normal braking or fast braking.


4

31

2 6

5

~

-

+

M 3 ~




W22 NEMA Brake Motors - NEMA PremiumTEFC - Mechanical Data

Frames 143T to 215T

Frames 254T to 326T

Frame 364/5T and 404/5T


101www.pamensky.com


W22 NEMA Brake Motors - NEMA PremiumTEFC - Mechanical Data

"C" FLANGE DIMENSIONS

NEMAFRAMES

BA AJ AK BDBF

BB BC AHNUMBER TAP SIZE

143/5TC 2.250 5.875 4.500 6.500

4

UNC 3/8"x16 0.1560.125

2.125182/4TC 2.750

7.250 8.500 8.875UNC 1/2"x13

0.250

2.625213/5TC 3.500

0.250

3.125254/6TC 4.250 3.75284/6TC

4.750 9.000 10.500 11.0314.375

284/6TSC 3.000324/6TC

5.250

11.000 12.500

13.583

UNC 5/8"x11

5.000324/6TSC 3.500364/5TC

5.87515.551 8

5.625364/5TSC 3.500404/5TC

6.6257.000

404/5TSC 4.000

"D" FLANGE DIMENSIONS

NEMAFRAMES

BA AJ AK BDBF

BBNUMBER TAP SIZE

143/5TD 2.25010.000 9.000 11.000

4

0.562

0.203

182/4TD 2.750213/5TD 3.500254/6TD 4.250

12.500 11.000 14.000

0.828

284/6TD4.750

284/6TSD324/6TD

5.25016.000 14.000

18.000324/6TSD364/5TD

5.875 17.716364/5TSD404/5TD

6.625 20.000 18.000 22.000 8404/5TSD

Frame Hole H HB HH HK J K LL LM O P 2E 2F d1 Bearings Manual release

D.E. N.D.E. HD2 β

143/5T 0.344 1.727 4.750 2.733 1.437 - 5.961 4.215 7.122 7.047 5.500 4.000/5.000

A4

6205-ZZ 6204-ZZ 8.6979°

182/4T0.406

2.216 5.5003.117

1.6146.575 5.246

9.343 8.740 7.500 4.500/5.500 6207-ZZ 6206-ZZ 12.138

213/5T 2.966 7.000 1.772 2.165 10.841 10.669 8.500 5.500/7.000 6308-ZZ 6207-ZZ 14.659 10°

254/6T

0.531

3.061 9.250

3.976

2.539 2.559

7.815 7.480

12.598 12.953 10.000 8.252/10.000 6309-C3 6209-Z-C3 17.195 9°

284/6TS3.535 10.250 3.110 2.874 14.067 14.173 11.000 9.500/11.000 6311-C3 6211-Z-C3 19.563

10°284/6T

324/6TS0.657 4.811 11.250 4.705 3.189 3.189 9.055 8.661 15.953 15.827 12.500 10.500/12.000 6312-C3 6212-Z-C3 25.48

324/6T

364/5TS0.660 4.251 12.362

6.0243.150 4.138

10.591 11.26717.957 17.914 14.016 11.260/12.244

UNC 3/4”6314-C3

6314-C3 - -364/5T

404/5T 0.810 5.252 14.213 3.937 5.669 19.566 19.134 15.984 12.244/13.740 6316-C3

Frame A AA AB B BA C D EV GShaft

U N-W ES R S

143/5T 6.457 NPT 3/4” 6.263 6.142 2.250 13.346 3.500

-

0.354 0.875 2.250 1.575 0.765 0.187

182/4T 8.661NPT 1”

7.513 6.969 2.750 15.860 4.500 0.394 1.125 2.750 1.969 0.984 0.250

213/5T 9.764 8.609 8.858 3.500 19.517 5.250 0.669 1.375 3.375 2.480 1.203 0.313

254/6T 12.126

NPT 1 1/2”

10.483 11.732 4.250 24.945 6.250 0.827 1.625 4.000 2.756 1.406 0.375

284/6TS13.780 11.073 13.071 4.750

26.5577.000 1.023

1.625 3.250 2.480 1.406 0.375

284/6T 27.929 1.875 4.622 3.149 1.594

0.500324/6TS

15.157 NPT 2” 12.575 14.567 5.25029.616

8.000 1.3001.875 3.750 2.756 1.594

324/6T 31.116 2.125 5.250 3.937 1.844

364/5TS17.165

NPT 3” 16.016

15.7605.875

32.2769.000 1.654 1.480

1.875 3.748 1.968 1.591

364/5T 15.512 34.251 2.375 5.874 4.330 2.019 0.625

404/5T 19.921 18.386 6.625 48.545 10.000 2.323 1.811 2.874 7.250 5.512 2.449 0.750




Saw Arbor MotorsTEFC

Standard Features

• Three-phase, 2 and 4 pole, 60Hz • Voltage:

• 208-230/460 V• 575 V

• 80S-MS up to 90L-MS - IEC metric frames• Die cast aluminum squirrel cage rotor • Totally Enclosed Fan Cooled (IP54 according to IEC34-5 standard)• Class ‘F’ insulation• 104ºF (40ºC) ambient temperature • 575V rated motors have Spike Resistant WISE wire.


• Continuous duty (S1)• Altitude: 3300 ft (1000 m) • 1045 carbon steel shaft• Ball bearings• F1 mount• Service factor: 1.0• Stainless steel nameplate• Cast iron frame • Dimensions according to IEC 72 • NPT threaded terminal box conduit hole• LH or RH thread on shaft• Paint: Enamel alkyd resin base• Color: RAL 7022 (Dark Gray)• WEG paint plan: 207A

Optional Features

• Special voltages• Specially dimensioned shaft• Terminal Box with metric threaded cable entries• Stainless steel shaft• Double shaft• F2 mount


101www.pamensky.com


Saw Arbor MotorsTEFC - Purchasing Data

Saw Arbor MotorsTEFC - Electrical Data

Rated OutputIEC Frame List Price Part Number

Full Load Current Full Load Efficiency


Overall Length“C” Dim.

(in.)HP RPM 460V 575V

3 3600 80S $1,003 SR003X02 4.29 3.43 80.5 84.9 18.543

53600 80M 1,337 SR005X02 6.65 5.32 85.0 99.2 20.5121800 90L 1,851 SR005X04 7.03 5.62 84.5 143 26.476

7.53600 80L 1,677 SR007X02 9.76 7.81 87.4 120 22.481800 90L 2,065 SR007X04 10.1 8.08 85.3 165 26.476

103600 90L 2,339 SR010X02 12.3 9.84 85.0 166 26.4761800 90L 2,612 SR010X04 14.1 11.3 85.5 178 26.476

Shaft: Replace ‘R’ with ‘L’ for left side shaftVoltage: Replace ‘X’ with ‘4’ for 208-230/460V Replace ‘X’ with ‘5’ for 575V

Saw Arbor MotorsTEFC - Electrical Data


NEMA Frame



Locked rotor torque

Breakdown torque


Weight (lb)

Noise level

Service Factor


HP kW 230V 460V 575V 50% 75% 100% 50% 75% 100%

3 2.2 3500 80S 8.58 4.29 3.43 7.3 330% 370% 9 84.9 62 1.15 76.0 79.5 80.5 0.65 0.75 0.80

5 3.73470 80M 13.3 6.65 5.32 8 340% 410% 7 99.2 62 1.15 82.0 84.5 85.0 0.66 0.77 0.821740 90L 14.1 7.03 5.62 8 380% 410% 8 143 51 1.15 82.0 84.0 84.5 0.58 0.71 0.78

7.5 5.53490 80L 19.5 9.76 7.81 9.2 400% 460% 5 120 62 1.15 85.2 87.0 87.4 0.64 0.75 0.811730 90L 20.2 10.1 8.08 8.2 370% 400% 7 165 51 1.15 83.5 85.0 85.3 0.60 0.74 0.80

10 7.53480 90L 24.6 12.3 9.84 8.5 400% 420% 7 166 68 1.15 82.0 84.5 85.0 0.77 0.86 0.901720 90L 28.2 14.1 11.3 8 400% 400% 6 178 51 1.15 84.5 85.5 85.5 0.57 0.71 0.78

IEC FRAMES

2E J A P AB 2F FK FK1 B FBA D O C FC AA XBEARINGS

D.E. N.D.E.

80S

7.480 1.378 8.858 7.480 5.984

10.236

1.772 1.772

12.008

3.150 3.150 6.063

18.543 22.440

NPT0.75" 4.724 6307-ZZ 6207-ZZ80M 12.205 13.976 20.512 24.409

80L 14.173 15.949 22.480 26.377

90L 6.299 2.500 7.756 8.189 6.575 20.079 2.441 4.960 21.378 3.150 3.543 6.968 26.476 29.842 NPT1" 6.299 6308-ZZ 6208-ZZ


tefc - pamensky canada 4 - definite purpose... · w22 nema brake motors - high efﬁciency tefc du...

Documents