tedia 2008-09 catalog
TRANSCRIPT
High Purity Solvents
World Class High Purity Solvents • Highly Focused Worldwide Customer Service
Tedia’s Balance of People and Technology
Produces Leading Edge High Purity Solvents for You
For more than three decades, Tedia has used proprietary purification methods to produce
High Purity Solvents. Each lot is rigorously analyzed by the Tedia Team and carefully
packaged to maintain the highest quality.
Balance
Introduction 2
Special Items & Product Grades 5
Recycletainer 6
Package Reference Guide 8
Tedia High Purity Solvents by Grade
Absolv 10
ACS 11
Anhydrosolv 12
Aquapoint Karl Fischer Reagents 13
Bio 14
DNA Reagents 15
GC 16
Histological 16
HPLC/ACS 17
HPLC Acids, Buffers & Ion Pair Reagents 18
High Purity Acids 19
HPLC/Spectro 20
LC/MS 22
USP/NF 23
Tedia Mission Statement and Core Values 25
Cross Reference by Grade 26
Quality Designations 27
Solvent Selection Guide 28
Product Listing and Product Information Codes 40
Alphabetical Listing of Products 41
Terms & Conditions 173
Chemsafe 174
Trademarks 178
International Distributors 179
U S Distributors 182
QU
AL ITY SYSTEMS
TEDI
A COMPANY, INC
.
ISO 9001:2000
Table of Contents
In Fairfield, Ohio, there is a smart, balanced,
nimble, highly focused company – with
world-class High Purity Solvents and highly
focused, worldwide customer service.
Certified State of Ohio Minority Business
Highly FocusedLeading Edge High Purity Solvents, Packaged for Your Convenience
You need solvents that provide accurate results time and time again.
Tedia is High Purity Solvents. No other company offers a more diverse line of High Purity Solvents
than Tedia. Tedia’s High Purity Solvents will meet all of your analytical needs and expectations.
Tedia especially selects raw materials to provide you with consistent quality and excellent value.
Then, Tedia handles these select raw materials with extreme care to avoid cross contamination
during the manufacturing process.
You will find Tedia High Purity Solvents available in sizes ranging from 100ML to full tank loads,
packaged and delivered to comply with your requirements.
The Tedia Team Assures You of The Finest High Purity Solvents
In complementary processes, all under one roof, the Tedia Team maintains complete ownership
of the High Purity Solvents it produces and sells. This ownership is your assurance that Tedia
High Purity Solvents will perform reliably, every time.
Each batch is rigorously tested and certified from the raw material to the last bottle to make
certain the solvents meet specifications. Tedia’s multi-step purification processes include chemical
pre-treatment, physical adsorption, and fractional batch distillation to remove trace impurities from
the solvents.
Tedia’s ownership and process control are always in harmony with your needs and expectations.
Harmony
Purity and ConsistencyPharmacology is helping mankind alleviate suffering and eliminate diseases.
Producing new pharmaceutical compounds requires precise process components
that produce the desired results.
You can be assured of achieving the results you require by using
Tedia High Purity Solvents.
Production and PrecisionManufacturing requires high volume production with little or
no process variation. Tedia knows that can be a difficult task.
That’s why Tedia takes great care to produce High Purity Solvents that produce for you.
Analysis and DocumentationYour analytical laboratory has invested in some of the most modern and
sophisticated instrumentation. Your staff has been carefully
recruited and intensely trained. You demand accurate, reliable results – promptly.
High Purity Solvents from Tedia tie it all together, helping your staff and
equipment produce the consistently accurate, reliable results your clients demand.
Personalized Customer Service From Tedia
At Tedia, our business is High Purity Solvents and you.
Tedia knows you can purchase quality solvents from many companies, so Tedia does more than
produce, certify and package High Purity Solvents.
Tedia takes care of you – the customer.
Tedia provides the High Purity Solvents you want, packaged for easy use, and delivered in a
timely manner.
You will love doing business with the smart, balanced, nimble, highly focused company that
works for you and with you.
Nimble
High Purity Solvents1000 Tedia WayFairfield, Ohio 45014 USAT 800.787.4891 F 513.874.5346www.tedia.com [email protected]
The Tedia PromiseProduct You will receive exactly the product you orderedPurity Your product will meet or exceed specifications and assayPackage Your product will be packaged and shipped to meet your needsPromptness Your order will be shipped in a timely mannerPeople You will be well taken care of by the entire Tedia Team
World Class High Purity SolventsHighly Focused Worldwide Customer Service
5
Special Items & Product Grades• Recycletainers
• Packaging Reference Guide
• Product Grades
• Absolv
• ACS
• Anhydrosolv
• Aquapoint
• Biological
• DNA Reagents
• GC
• Histological
• HPLC Acids, Buffers and Ion Pairs
• HPLC/ACS
• High Purity Acids
• HPLC Spectro
• LC/MS
• USP/NF
5
6
RecycletainerIncreases Efficiency and Safety
You do exacting work, exactingly. Tedia does too.
Tedia’s Recycletainer allows you to dispense exactly the amount you need, in the condition you need it - pure and
free of moisture and other contaminants. The Tedia Recycletainer is the high-efficiency way to dispense Tedia High
Purity Solvents.
And, Tedia’s Recycletainer helps eliminate spills and waste. No more broken bottles! You just pay for the solvents you
use, not for the disposal of containers and packaging.
Tedia’s Recycletainers come with a variety of dispensing systems and are available in 20L, 56L, 204L and 1,250L.
To benefit from the efficiency and safety of Tedia’s Recycletainer, simply contact your Tedia distributor or Tedia.
Recycletainers use Swagelok™ quick connects. NOWPak™ packaging options are available on request. Call Tedia
at 1-800-PURITY1 or email [email protected] for further details.
20L 56L 1250L204L
TEdIa ParTrECYCLETaInEr numbEr TarE STEELdESCrIPTIon SuffIx wEIghT hEIghT dIamETEr gaugE
20L -035 11.6 kg 486 mm 313 mm 316
56L -051 15.2 kg 730 mm 395 mm 304
56L, 316 Steel -130 15.2 kg 730 mm 395 mm 316
204L -034 47.4 kg 1,193 mm 550 mm 304
204L ASME -024 70.3 kg 1,400 mm 550 mm 304
204L ASME, 316 Steel -112 70.3 kg 1,400 mm 550 mm 316
1250L -172 360 kg 1,920 mm 1,150 mm 304
dImEnSIonS
7Nitrogen
InletAvailable Steel
Gauges:304 AISI316 AISI
Pressure Gauge
Burst DiscElectronic Level Sensor Minimum Specific Gravity
.770 (204L).800 (1250L)
Internal Electropolish
Available
Pressure Relief Valve
Liquid Outlet Swagelok ™ quick connects
addITIonaL fITTIngS/oPTIonS
PrESSurE LEvEL InTErnaL manuaL TEfLon quICk gaugE SEnSor ELECTroPoLISh burST dISC vaLvES ConnECT
No No No No Yes Available
No Available No No No
No Available Yes No No Available
Yes No No No Yes
Yes Yes No Yes Yes
Yes Yes Yes Yes Yes Available
Yes Yes No Yes Yes
8
20L Poly Drum
204LPoly Drum
1LGL-45
2.5L GL-45
Packaging Reference Guide
100mlAmber Glass
450mlAmber Glass
500mlAmber Glass
950ml Amber Glass
1L Amber Glass
2.5LAmber Glass
4LAmber Glass
500mlFlint Glass
20LMetal Pail
204L Steel Drum
500mlPoly Bottle
2.5LFlint Glass
1LPoly Bottle
4LPoly Bottle
200mlAmber Glass
9
Septum Seal Amber glass in 100ml, 1L, 4L
Septum Sealed Bottle
a. Outer closure: Black easy-slip-on vinyl cap with a Teflon® liner
b. Black secrew-on phenolic cap with 18mm hole
C. Teflon®-faced septum reinforced with nitrile rubber
d. Glass Bottle
Note: Do not twist off the outer closure. This breaks the seal and compromises the integrity of the solvent.
how to use TEdIa anhYdroSoLv Solvent bottle assembly
1. Remove the vinyl cap.2. Fill a dry syringe with dry inert gas (argon or nitrogen). 3. Pierce the septum with the syringe. Use fresh locations each time to prolong product quality.4. Push the gas from the syringe into the bottle, then slowly withdraw the required amount of solvent. 5. Carefully remove the syringe from the bottle.6. Dispense the required solvent.7. After each use, replace the vinyl cap to further protect the solvent from moisture.
Note: Use smaller diameter needles to optimize resealability and prolong the quality of the residual product in the bottle.
10
AA1111 Acetone 330 nm Min. 99.9% Max. 0.5% Max. 1 ppm Max. 1 ppb Max. 5 ppb Max. 10 ppt
AA1121 Acetonitrile* 190 nm Min. 99.9% Max. 0.01% Max. 1 ppm Max. 1 ppb Max. 5 ppb Max. 10 ppt
CA1300 Carbon Disulfide 382 nm Min. 99.9% Max. 0.05% Max. 3 ppm
CA1331 Chloroform w/Amylene 245 nm Min. 99.9% Max. 0.02% Max. 1 ppm Max. 1 ppb Max. 5 ppb Max. 10 ppt
CA1330 Chloroform w/Ethanol 245 nm Min. 99.8% Max. 0.03% Max. 5 ppm Max. 10 ppb Max. 10 ppb
CA1343 Cyclohexane 202 nm Min. 99.9% Max. 0.02% Max. 1 ppm Max. 1 ppb Max. 10 ppb Max. 10 ppt
DA1420 1,2-Dichloroethane 226 nm Min. 99.9% Max. 0.02% Max. 1 ppm Max. 1 ppb Max. 10 ppt
DA1431 Dichloromethane 233 nm Min. 99.9% Max. 0.01% Max. 1 ppm Max. 1 ppb Max. 5 ppb Max. 10 ppt
EA1511 Ethyl Acetate 255 nm Min. 99.9% Max. 0.05% Max. 1 ppm Max. 1 ppb Max. 5 ppb Max. 10 ppt
EA1530 Ethyl Ether Anhydrous 215 nm Min. 99.9% Max. 0.02% Max. 1 ppm Max. 1 ppb Max. 10 ppt
EA1535 Ethyl Ether w/Ethanol 215 nm Min. 99.9% Max. 0.03% Max. 1 ppm Max. 1 ppb Max. 10 ppt
HA1708 n-Heptane 99% 197 nm Min. 99.5%1 Max. 0.02% Max. 1 ppm Max. 1 ppb Max. 10 ppt
HA1709 n-Heptane 96% 197 nm Min. 99.0%1 Max. 0.02% Max. 1 ppm Max. 1 ppb Max. 10 ppt
HA1721 n-Hexane 95% 195 nm Min. 99.5%2 Max. 0.01% Max. 1 ppm Max. 1 ppb Max. 5 ppb Max. 10 ppt
HA0800 Hexanes 195 nm Min. 99.0%2 Max. 0.01% Max. 1 ppm Max. 1 ppb Max. 10 ppt
PA2031 Isopropyl Alcohol 205 nm Min. 99.9% Max. 0.05% Max. 1 ppm Max. 1 ppb Max. 10 ppt
MA1921 Methyl Alcohol* 205 nm Min. 99.9% Max. 0.05% Max. 1 ppm Max. 1 ppb Max. 5 ppb Max. 10 ppt
MA1970 Methyl t-Butyl Ether 210 nm Min. 99.9% Max. 0.05% Max. 1 ppm Max. 1 ppb Max. 10 ppt
PA2013 Pentane 192 nm Min. 99.9% Max. 0.02% Max. 1 ppm Max. 1 ppb Max. 5 ppb Max. 10 ppt
PA2019 Petroleum Ether 35-60°C Max. 0.02% Max. 1 ppm Max. 1 ppb Max. 10 ppt
TA2131 Toluene 285 nm Min. 99.9% Max. 0.02% Max. 1 ppm Max. 1 ppb Max. 10 ppb Max. 10 ppt
TA2171 2,2,4-Trimethylpentane 205 nm Min. 99.8% Max. 0.02% Max. 1 ppm Max. 1 ppb Max. 10 ppt
*Passes Gradient Elution test
1As C7 Hydrocarbons 2As C6 Hydrocarbons
fId ECd rESIduE rESPonSIvE - aS CaTaLog uv rESIduE afTEr fLuorESCEnCE rESIduE - hEPTaChLornumbEr ChEmICaL CuToff aSSaY waTEr EvaPoraTIon baCkground aS 2-oCTanoL EPoxIdE
Absolvabsolute Purity, absolute Performance!
Tedia ABSOLV solvents are universal grade solvents, specially purified for GC, HPLC/LC and UV-spectrophotometric
applications, as well as general lab use.
You no longer have to keep multiple grades of solvents in inventory. ABSOLV solvents provide:
• Low UV absorbance, low residue after evaporation and low water levels for flat base lines and extended column life
• Consistent gradient profiles
• Trace organic residue impurities controlled at parts per trillion levels by GC-FID and/or GC-ECD
11
AR0104 Acetic Acid Glacial 500ml, 2.5L, 4L, 20L, 204L
AR0108 Acetic Anhydride 1L, 4L
AR0114 Acetone 1L, 4L, 20L, 204L
AR0116 Acetonitrile 1L, 4L, 20L, 204L
AR0123 Alcohol, Anhydrous, Reagent 1L, 4L, 20L, 204L
AR0147 Ammonium Hydroxide 2.5L, 500ml
AR0162 n-Amyl Alcohol 1L, 4L
AR0170 Aniline 1L, 4L
BR0228 Benzyl Alcohol 1L, 4L
BR0284 n-Butyl Acetate 1L, 4L
BR0292 n-Butyl Alcohol 1L, 4L, 20L
BR0294 tert-Butyl Alcohol 1L, 4L
CR0335 Carbon Disulfide 1L
CR0353 Chlorobenzene 1L, 4L, 20L
CR0360 Chloroform w/Amylene 1L, 4L, 20L, 204L
CR0359 Chloroform w/Ethanol 1L, 4L, 20L, 204L
CR0392 Cyclohexane 1L, 4L, 20L, 204L
CR0394 Cyclohexanone 1L, 4L
DR0426 1,2-Dichloroethane 1L, 4L
DR0440 Dichloromethane 1L, 4L, 20L, 204L
DR0427 Diethanolamine 1L, 4L
DR0469 Dimethyl Sulfoxide 1L, 4L, 20L
DR0456 N,N-Dimethylformamide 1L, 4L, 20L
DR0480 1,4-Dioxane 1L, 4L, 20L
DR0486 1-Dodecanol 1L, 4L
ER0502 Ethanolamine 1L, 4L
ER0511 Ethyl Acetate 1L, 4L, 20L, 204L
EER0550 Ethyl Ether Anhydrous 1L, 4L, 12.5kg, 204L
ER0551 Ethyl Ether w/Ethanol 1L, 4L, 12.5kg, 204L
ER0545 Ethylene Glycol Monomethyl Ether 1L, 4L, 20L
FR0621 Formaldehyde 37% 1L, 4L, 20L, 204L
FR0626 Formamide 1L, 4L
FR0628 Formic Acid 88% 1L, 4L
FR0629 Formic Acid 96% 1L, 4L
GR0725 Glycerol 1L, 4L
HR0823 n-Hexane 95% 1L, 4L, 20L, 204L
HR0801 Hexanes 1L, 4L, 20L, 204L
HR0870 Hydrochloric Acid 37% 2.5L, 500ml
HR0881 Hydrofluoric Acid 4L, 500ml
HR0885 Hydrogen Peroxide 30% 4L, 500ml
AR0163 Isoamyl Alcohol 1L, 4L
BR0290 Isobutyl Alcohol 1L, 4L
PR1490 Isopropyl Alcohol 1L, 4L, 20L, 204L
IR0980 Isopropyl Ether 1L, 4L
LR1205 Lactic Acid 1L, 4L
MR1272 Methyl Alcohol 1L, 4L, 20L, 204L
MR1275 Methyl Ethyl Ketone 1L, 4L, 20L, 204L
MR1279 Methyl Isobutyl Ketone 1L, 4L, 20L
MR4108 Methyl t-Butyl Ether 1L, 4L, 20L
MR1282 1-Methyl-2-pyrrolidinone 1L, 4L
MR1305 Morpholine 1L, 4L, 20L
NR1320 Nitric Acid 2.5L, 500ml
NR4125 Nitrobenzene 1L, 4L
NR4126 Nitromethane 1L, 4L
OR1374 1-Octanol 1L, 4L
PR1422 Perchloric Acid (60-62%) 2.5L, 500ml
PR1423 Perchloric Acid (69-72%) 2.5L, 500ml
PR1428 Petroleum Ether 35-60°C 1L, 4L, 20L, 204L
PR4131 Phenol, Loose Crystals 500g, 1kg
PR1435 Phosphoric Acid 85% 2.5L, 500ml
PR1491 n-Propyl Alcohol 1L, 4L
PR1494 Propylene Glycol 1L, 4L
PR1498 Pyridine 1L, 4L
SR1789 Sulfuric Acid 2.5L, 500ml
TR1820 Tetrachloroethylene 1L, 4L, 20L
TR1825 Tetrahydrofuran/BHT 1L, 4L, 20L, 204L
TR1850 Toluene 1L, 4L, 20L, 204L
TR1860 Trichloroethylene 1L, 4L
TR1870 2,2,4-Trimethylpentane 1L, 4L, 20L, 204L
XR2250 Xylenes 1L, 4L, 20L, 204L
ACSTedia ACS Solvents meet the national standards defined by the American Chemical Society in Reagent Chemicals,
Tenth Edition1, and are handled with the same processes and equipment used for our highest purity grades.
CaTaLog PaCkagE CaTaLog PaCkagE numbEr ChEmICaL SIzE numbEr ChEmICaL SIzE
1Updated information is available at http://pubs.acs.org/reagents.
12
AnhydrosolvTry Tedia ANHYDROSOLV purified and packaged for critical moisture-sensitive reactions such as organic,
organometallic, and oligonucleotide synthesis. No need for further purification in your lab. ANHYDROSOLV
solvents feature:
• Low residue
• Low water content
• Large septum surface for easy access
• Available in 100ml and 1L
• Double closure to preserve product quality
• Packaging under nitrogen
waTEr waTEr ConTEnT ConTEnTCaTaLog 1L 100L numbEr ChEmICaL (ppm) (ppm)
AH3801 Acetonitrile 10 50
AH3802 Acetonitrile w/ Molecular Sieve 10
BH3815 Butyl Ether 50 50
CH3827 Chloroform w/Amylene 10 50
CH3830 Chloroform w/Ethanol 10 50
CH3833 Cyclohexane 10 50
DH3839 1,2-Dichloroethane 30 50
DH3842 Dichloromethane 10 50
DH3845 Dimethyl Sulfoxide 50 50
DH3846 Dimethyl Sulfoxide w/ Molecular Sieve 50
DH3848 N,N-Dimethylacetamide 50 50
DH3849 N,N-Dimethylacetamide w/ Molecular Sieve 50
DH3851 N,N-Dimethylformamide 50 50
DH3852 N,N-Dimethylformamide w/ Molecular Sieve 50
DH3854 1,4-Dioxane 30 50
DH3856 1,4-Dioxane w/ Molecular Sieve 30
EH3857 Ethyl Acetate 50 50
EH3860 Ethyl Ether Anhydrous 50 50
EH3866 Ethylene Glycol Dimethyl Ether 30 50
HH3869 n-Heptane 99% 20 50
HH0803 Hexanes 20 50
PH3881 Isopropyl Alcohol 50 50
MH3887 Methyl Alcohol 20 50
MH3888 Methyl Alcohol w/ Molecular Sieve 20
MH3903 1-Methyl-2-pyrrolidinone 50 50
PH3906 Pentane 10 50
PH3909 Petroleum Ether 35-60°C 50 50
PH3915 Propylene Carbonate 50 50
PH3918 Pyridine 30 50
TH3924 Tetrahydrofuran/BHT 20 50
TH3927 Tetrahydrofuran/No BHT 30 50
TH3930 Toluene 20 50.
12
13
KR4400 Karl Fischer Reagent Buffer Solution AQUAPOINT
KR4406 Karl Fischer Reagent Composite 2 AQUAPOINT
KR4408 Karl Fischer Reagent Composite 5 AQUAPOINT
KR4410 Karl Fischer Reagent Composite 5K AQUAPOINT
KR4414 Karl Fischer Reagent Solvent C2 AQUAPOINT
KR4416 Karl Fischer Reagent Solvent K1 AQUAPOINT
KR4418 Karl Fischer Reagent Solvent Oils AQUAPOINT
KR4420 Karl Fischer Reagent Solvent Oils and Fats AQUAPOINT
KR4426 Karl Fischer Reagent Titrant 2 AQUAPOINT
KR4428 Karl Fischer Reagent Titrant 5 AQUAPOINT
Aquapoint Karl Fischer ReagentsTedia AQUAPOINT Karl Fischer Reagents are pyridine-free reagents for volumetric analysis of water. They can
be used with any kind of autotitrators without modification of the titrator parameters, ensuring fast, accurate, and
exact results.
TEDIA AQUAPOINT includes:
• 1 component reagents for general use
• 1 component reagents for use with aldehydes and ketones analysis
• 2 components reagents formed by the titrant agent and working medium
• Working mediums for specific applications using buffers to control pH in acids
CaTaLog CaTaLog numbEr ChEmICaL gradE numbEr ChEmICaL gradE
14
Tedia BIO solvents are specially purified for use in oligonucleotide and peptide syntheses and other organic reactions
requiring control of moisture, amines, and UV-absorbance.
Bio
AB1124 Acetonitrile Control of water content, gradient suitability and UV-absorbance 10
DB2795 Dichloromethane Control of acidity, water content and UV-absorbance 30
DB0460 Dimethyl Sulfoxide Control of water content and UV-absorbance 250
DB0455 N,N-Dimethylformamide Control of amine levels (<5 ppm), water content and UV-absorbance 300
GB1610 Glycerol Control of DNase, Protease, and RNase
MB1920 Methyl Alcohol Control of acetone level, acidity, water content and UV-absorbance 300
MB1283 1-Methyl-2-pyrrolidinone Control of amine levels (<5 ppm), water content and UV-absorbance 200
MB1288 1-Methylimidazole Control of water content 150
PB2050 Pyridine Control of amine levels (<10 ppm), water content and UV-absorbance 100
TB2120 Tetrahydrofuran (unstabilized) Control of water content and UV-absorbance 50
CaTaLog waTEr numbEr ChEmICaL ConTroL of ImPurITIES ConTEnT (ppm)
15
AB1124 Acetonitrile 10
AB1128 Acetonitrile w/ Molecular Sieve 10
AH3801 Acetonitrile 10
AH3802 Acetonitrile w/ Molecular Sieve 10
AB3963 Activator Solution (0.25M DCI in Acetonitrile) 30
AB3962 Activator Solution (0.25M ETT in Acetonitrile) 30
AB3964 Activator Solution (0.2M BMT in Acetonitrile) 30
AB3961 Activator Solution (0.3M BMT in Acetonitrile) 30
AB3959 Activator Solution (0.5M ETT in Acetonitrile) 30
CB3974 Cap A (1-Methylimidazole in Acetonitrile, 1:9) 150
CB3976 Cap A (1-Methylimidazole in Acetonitrile, 2:8) 150
CB3965 Cap A (Acetic Anhydride in THF, 1:9) 150
CB3970 Cap A (Acetic Anhydride, 2,6-Lutidine in THF, 1:1:8) 150
CB3975 Cap A (Acetic Anhydride, Pyridine in THF, 1:1:8) 150
CB3980 Cap B (1-Methylimidazole in THF, 1:9) 150
CB3979 Cap B (1-Methylimidazole in THF, 16:84) 150
CB3985 Cap B (1-Methylimidazole, Pyridine in THF, 1:1:8) 150
CB3984 Cap B (Acetic Anhydride in Acetonitrile, 1:9) 150
CB3982 Cap B 1 (Acetic Anhydride in Acetonitrile, 4:6) 150
CB3983 Cap B 2 (2,6-Lutidine in Acetonitrile, 6:4) 150
DB3992 Deblock Solution, 1% TCA in DCM (w/v) 150
DB3991 Deblock Solution, 2% TCA in DCM (w/v) 150
DB3988 Deblock Solution, 3% DCA in DCM (v/v) 150
DB0490 Deblock Solution, 3% DCA in Toluene (v/v) 150
DB3990 Deblock Solution, 3% TCA in DCM (w/v) 150
DB3993 Deblock Solution, 5% DCA in Toluene (v/v) 150
OB9911 Oxidation Solution
(0.02M Iodine in THF/Pyridine/Water, 70:20:10)
OB9910 Oxidation Solution
(0.02M Iodine in THF/Pyridine/Water, 89.6/0.4/10)
OB3994 Oxidation Solution
(0.05M Iodine in Pyridine/Water, 90:10)
OB9914 Oxidation Solution
(0.1M Iodine in THF/Pyridine/Water, 78:20:2)
DNA Reagentsventure Into new frontiers with a Proven Partner
You work at the leading edge, looking for solutions to problems that have
long puzzled mankind. You know how promising and how demanding
working with DNA and RNA can be. Tedia does too.
And, when it can require a quarter of a million dollars to synthesize a gram of
DNA, Tedia knows your High Purity Solvents must be perfect – every time!
Tedia offers standard reagents for oligonucleotide synthesis, as well as the
ability to custom produce reagents with specifications and formulations best
suited to your synthesis needs.
Tedia’s packaging includes a wide range of bottle sizes configured to
connect to popular synthesizers, including ABI®, Expedite®, Amersham® and
MerMade®. Tedia also offers bulk packaging in reusable containers, including
NOWPak® and Tedia’s stainless steel Recycletainers.
waTEr waTErCaTaLog ConTEnT CaTaLog ConTEnTnumbEr ChEmICaL (ppm) numbEr ChEmICaL (ppm)
16
Tedia GC solvents are optimized for organic residue extraction/concentration procedures that utilize GC/ECD
and/or GC/FID methods, including pesticide residue analysis. Tedia GC solvents feature:
• Solvent stability
• Narrow solvent front
• Fllat base line
• Absence of extraneous peaks
GC
gC-ECd (ppt) gC-fId (ppb)CaTaLog max SIngLE max SIngLE numbEr ChEmICaL PEak aS PEak aS
Histological Tedia HISTOLOGICAL solvents are commonly used for tissue sampling and processing. Precise control of the
manufacturing process ensures unsurpassed lot-to-lot consistency.
AR0109 Acetone 1L, 4L, 20L, 204L
DR0479 1,4-Dioxane 1L, 4L, 20L
FR0622 Formaldehyde 37% 1L, 4L, 20L
PR2037 Isopropyl Alcohol 1L, 4L, 20L, 204L
MR1268 Methyl Alcohol 1L, 4L, 20L, 204L
TR1824 Tetrahydrofuran (stabilized with BHT) 1L, 4L, 20L, 204L
XR2251 Xylenes 1L, 4L, 20L, 204L
CaTaLog numbEr ChEmICaL PaCkagE SIzE
AG2800 Acetone 10 Heptachlor Epoxide 5 2-Octanol
AG2802 Acetonitrile 10 Heptachlor Epoxide 5 2-Octanol
BG1242 n-Butyl Alcohol 20 Heptachlor Epoxide 5 2-Octanol
CG2804 Chloroform (stabilized with
Amylene) 5 Heptachlor Epoxide 5 2-Octanol
CG2805 Chloroform (stabilized with
Ethanol ) 10 Heptachlor Epoxide 5 2-Octanol
CG1342 Cyclohexane 10 Heptachlor Epoxide 10 2-Octanol
DG2810 Dichloromethane 10 Heptachlor Epoxide 5 2-Octanol
EG2816 Ethyl Acetate 10 Heptachlor Epoxide 5 2-Octanol
EG1532 Ethyl Ether Anhydrous 10 Heptachlor Epoxide 5 2-Octanol
EG1537 Ethyl Ether (stabilized
with Ethanol ) 10 Heptachlor Epoxide 5 2-Octanol
HG2820 n-Hexane 95% 10 Heptachlor Epoxide 5 2-Octanol
HG0808 Hexanes 10 Heptachlor Epoxide 5 2-Octanol
MG2826 Methyl Alcohol 10 Heptachlor Epoxide 5 2-Octanol
MG1972 Methyl t-Butyl Ether 10 Heptachlor Epoxide 10 2-Octanol
PG2835 Pentane 10 Heptachlor Epoxide 5 2-Octanol
PG2840 Petroleum Ether 35-60°C 10 Heptachlor Epoxide 5 2-Octanol
PG2033 Isopropyl Alcohol 10 Heptachlor Epoxide 5 2-Octanol
TG2133 Toluene 10 Heptachlor Epoxide 10 2-Octanol
TG2173 2,2,4-Trimethylpentane 10 Heptachlor Epoxide 5 2-Octanol
17
HPLC/ACS Tedia can provide large volumes of solvent especially purified for preparative scale liquid chromatography, pharmaceutical
production, organic synthesis, or simply washing apparatus. Tedia HPLC/ACS solvents exceed ACS specifications
and are offered in 20L metal pails and 204L metal drums.
AS3300 Acetone 330 nm Min. 99.5% Max. 0.5% Max. 10 ppm
AS1127 Acetonitrile 190 nm Min. 99.9% Max. 0.02% Max. 5 ppm
AS3308 Alcohol, Anhydrous, Reagent 205 nm 89-91% Max. 0.1% Max. 4 ppm
CS3315 Chloroform w/Amylene 245 nm Min. 99.9% Max. 0.03% Max. 5 ppm
CS3317 Chloroform w/Ethanol 245 nm Min. 99.9% Max. 0.03% Max. 5 ppm
DS3325 Dichloromethane 233 nm Min. 99.8% Max. 0.02% Max. 5 ppm
ES3335 Ethyl Acetate 255 nm Min. 99.8% Max. 0.05% Max. 5 ppm
HS3341 Hexane 95%, n- 195 nm Min. 99.5% 1 Max. 0.02% Max. 5 ppm
HS0805 Hexanes 195 nm Min. 99.5% 1 Max. 0.02% Max. 5 ppm
PS3370 Isopropyl Alcohol 205 nm Min. 99.8% Max. 0.10% Max. 5 ppm
MS3350 Methyl Alcohol 205 nm Min. 99.9% Max. 0.10% Max. 5 ppm
TS3380 Toluene 285 nm Min. 99.8% Max. 0.03% Max. 4 ppm
TS3390 2,2,4-Trimethylpentane 210 nm Min. 99.7% Max. 0.02% Max. 5 ppm 1As C6 Hydrocarbons
rESIduECaTaLog uv afTEr numbEr ChEmICaL CuToff aSSaY waTEr EvaPoraTIon
17
18
HPLC Acids, Buffers & Ion Pair ReagentsTedia offers three HPLC ACIDS, six BUFFERS and twelve ION PAIR REAGENTS to optimize your HPLC applications.
To assure HPLC suitability, these reagents are controlled for UV transparency.
CaTaLog numbEr ChEmICaL PaCkagE SIzE
aCIdS
AS1102 Acetic Acid Glacial 1L, 2.5L
FS0630 Formic Acid 96% 500ml
PS1434 Phosphoric Acid 85% 1L
TS4295 Trifluoroacetic Acid 100ml, 500ml
buffErS
AS0139 Ammonium Acetate 500g, 1Kg
AS4007 Ammonium Carbonate 500g, 1Kg
AS4031 Ammonium Phosphate Monobasic 500g, 1Kg
PS4170 Potassium Phosphate Monobasic 500g, 1Kg
SS1713 Sodium Acetate Trihydrate 500g, 1Kg
SS4178 Sodium Bicarbonate 500g, 1Kg
Ion PaIr rEagEnTS
BS3395 1-Butanesulfonic Acid, Sodium Salt 25g, 100g
DS3398 1-Decanesulfonic Acid, Sodium Salt 25g, 100g
DS3400 1-Dodecanesulfonic Acid, Sodium Salt 25g, 100g
HS3403 1-Heptanesulfonic Acid, Sodium Salt 25g, 100g
HS3408 1-Hexanesulfonic Acid, Sodium Salt 25g, 100g
OS3415 1-Octanesulfonic Acid, Sodium Salt 25g, 100g
PS3422 1-Pentanesulfonic Acid, Sodium Salt 25g, 100g
TS3432 Tetrabutylammonium Bromide 25g, 100g
TS3434 Tetrabutylammonium Hydrogen Sulfate 25g, 100g
TS1819 Tetrabutylammonium Hydroxide in Water (1M) 500ml, 4L
TS3435 Tetrabutylammonium Phosphate 25g
TS3437 Tetraheptylammonium Bromide 25g, 100g
19
Tedia offers Seven high Purity acids in Two grades for Trace Element analysis.
Tedia TRACEMETAL acids are purified using an advanced distillation technique to provide the consistent repro-
ducible results you need. 32 trace elements are analyzed to parts per billion (ppb) levels by ICP/MS.
Tedia TRACEMETAL PLUS acids are produced by proprietary distillation technology and analyzed for over 65
trace elements in parts per trillion (ppt) levels. Tedia TRACEMETAL PLUS acids are packaged in pre-leached
Teflon bottles to maintain ppt purity and meet your most stringent requirements for trace element analysis.
High Purity Acids
CaTaLog numbEr ChEmICaL PaCkagE SIzE
TraCEmETaL aCIdS
AE4001 Acetic Acid Glacial 500ml, 2.5L
AE4017 Ammonium Hydroxide 500ml
HE4088 Hydrochloric Acid 500ml, 2.5L
HE0879 Hydrofluoric Acid 500ml, 4L
NE4123 Nitric Acid 500ml, 2.5L
PE4128 Perchloric Acid 500ml, 2.5L
SE4281 Sulfuric Acid 500ml, 2.5L
TraCEmETaL PLuS aCIdS
AE4000 Acetic Acid Glacial 250ml, 500ml, 1L
AE4016 Ammonium Hydroxide 250ml, 1L
HE4087 Hydrochloric Acid 250ml, 500ml, 1L, 2L
HE0878 Hydrofluoric Acid 250ml, 500ml, 1L
NE4122 Nitric Acid 250ml, 500ml, 1L, 2L
PE4127 Perchloric Acid 250ml, 500ml, 1L
SE4280 Sulfuric Acid 250ml, 500ml, 1L
19
20
Tedia offers 57 Solvents for Your hPLC and uv-Spectrophotometric needs.
HPLC/Spectro
AS1112 Acetone 330 nm Min. 99.5% Max. 0.5% Max. 5 ppm
AS1122 Acetonitrile 190 nm Min. 99.9% Max. 0.02% Max. 2 ppm
AS1131 Alcohol, Anhydrous, Reagent 205 nm 89-91% Max. 0.10% Max. 4 ppm
BS1221 n-Butyl Acetate 254 nm Min. 99.0% Max. 0.05% Max. 5 ppm
BS1241 n-Butyl Alcohol 215 nm Min. 99.8% Max. 0.05% Max. 5 ppm
BS4047 tert-Butyl Alcohol 215 nm Min. 99.5% Max. 0.05% Max. 5 ppm
CS1311 Chlorobenzene 289 nm Min. 99.9% Max. 0.03% Max. 3 ppm
CS1321 1-Chlorobutane 220 nm Min. 99.5% Max. 0.02% Max. 5 ppm
CS1332 Chloroform w/Amylene 245 nm Min. 99.9% Max. 0.02% Max. 3 ppm
CS1334 Chloroform w/Ethanol 245 nm Min. 99.9% Max. 0.02% Max. 3 ppm
CS1341 Cyclohexane 202 nm Min. 99.5% Max. 0.02% Max. 3 ppm
rESIduECaTaLog uv afTEr numbEr ChEmICaL CuToff aSSaY waTEr EvaPoraTIon
No other brand matches Tedia’s variety. Tedia HPLC/
SPECTRO solvents offer:
• High assay
• Low residue after evaporation
• Low water content
• Low UV cut-offs and stable base line
• Lot-to-lot, bottle-to-bottle consistency
• Packaging under nitrogen
• Sub-micron filtration
• Specially cleaned bottles
• Teflon-lined closure system
21
rESIduECaTaLog uv afTEr numbEr ChEmICaL CuToff aSSaY waTEr EvaPoraTIon
CS1351 Cyclopentane 75% 198 nm Min. 99.8% 1 Max. 0.02% Max. 3 ppm
DS1411 o-Dichlorobenzene 296 nm Min. 98.0% Max. 0.02% Max. 5 ppm
DS1421 1,2-Dichloroethane 226 nm Min. 99.9% Max. 0.02% Max. 3 ppm
DS1432 Dichloromethane 233 nm Min. 99.9% Max. 0.01% Max. 3 ppm
DS1461 Dimethyl Sulfoxide 263 nm Min. 99.8% Max. 0.05% Max. 5 ppm
DS1441 N,N-Dimethylacetamide 270 nm Min. 99.5% Max. 0.03% Max. 5 ppm
DS1451 N,N-Dimethylformamide 270 nm Min. 99.8% Max. 0.05% Max. 5 ppm
DS1471 1,4-Dioxane 215 nm Min. 99.9% Max. 0.05% Max. 5 ppm
ES1512 Ethyl Acetate 255 nm Min. 99.8% Max. 0.05% Max. 3 ppm
ES1531 Ethyl Ether Anhydrous 215 nm Min. 99.9% Max. 0.03% Max. 5 ppm
ES1536 Ethyl Ether w/Ethanol 215 nm Min. 99.9% Max. 0.03% Max. 5 ppm
ES4083 Ethylene Glycol Dimethyl Ether 220 nm Min. 99.9% Max. 0.05% Max. 5 ppm
ES1911 Ethylene Glycol Monomethyl Ether 210 nm Min. 99.9% Max. 0.05% Max. 5 ppm
ES1917 Ethylene Glycol Monomethyl Ether Acetate 254 nm Min. 99.0% Max. 0.05% Max. 5 ppm
HS1711 n-Heptane 96% 197 nm Min. 99.0% 2 Max. 0.02% Max. 3 ppm
HS1712 n-Heptane 99% 197 nm Min. 99.5% 2 Max. 0.02% Max. 3 ppm
HS1722 n-Hexane 95% 195 nm Min. 99.5% 3 Max. 0.01% Max. 2 ppm
HS4721 n-Hexane 99% 210 nm Min. 99.5% 3 Max. 0.03% Max. 3 ppm
HS0806 Hexanes 195 nm Min. 99.0% 3 Max. 0.01% Max. 2 ppm
BS1231 Isobutyl Alcohol 220 nm Min. 99.0% Max. 0.05% Max. 5 ppm
PS2032 Isopropyl Alcohol 205 nm Min. 99.8% Max. 0.05% Max. 5 ppm
MS1922 Methyl Alcohol 205 nm Min. 99.9% Max. 0.05% Max. 2 ppm
MS1931 Methyl Ethyl Ketone 329 nm Min. 99.5% Max. 0.08% Max. 5 ppm
MS1951 Methyl Isobutyl Ketone 334 nm Min. 99.0% Max. 0.08% Max. 5 ppm
MS1971 Methyl t-Butyl Ether 210 nm Min. 99.8% Max. 0.05% Max. 3 ppm
MS1961 1-Methyl-2-pyrrolidinone 265 nm Min. 99.5% Max. 0.05% Max. 5 ppm
MS4110 Methylcyclohexane 207 nm Min. 99.0% Max. 0.01% Max. 5 ppm
OS1373 1-Octanol 215 nm Min. 99.0% Max 0.02% Max. 40 ppm
PS2011 Pentane 192 nm Min. 99.9% 5 Max. 0.02% Max. 5 ppm
PS2041 n-Propyl Alcohol 210 nm Min. 99.5% Max. 0.08% Max. 5 ppm
PS2051 Pyridine 315 nm Min. 99.8% Max. 0.05% Max. 4 ppm
TS2111 Tetrachloroethylene 290 nm Min. 99.0% Max. 0.05% Max. 5 ppm
TS2121 Tetrahydrofuran/No BHT 212 nm Min. 99.8% Max. 0.03% Max. 5 ppm
TS2132 Toluene 285 nm Min. 99.8% Max. 0.03% Max. 4 ppm
TS2141 1,2,4-Trichlorobenzene 308 nm Min. 99.0% Max. 0.01% Max. 5 ppm
TS2172 2,2,4-Trimethylpentane 205 nm Min. 99.7% Max. 0.02% Max. 3 ppm
XS2311 o-Xylene 288 nm Min. 99.0% 4 Max. 0.03% Max. 3 ppm
XS2247 p-Xylene 294 nm Min. 99.0% Max. 0.03% Max. 5 ppm
1As Mixtures of C5 and C6 Hydrocarbons 2As C7 Hydrocarbons 3As C6 Hydrocarbons4As Xylenes5As C5 Hydrocarbons
HPLC/Spectro (continued)
22
LC/MS
mL1919 aL1129 wL2212 mEThYL aLCohoL aCETonITrILE waTEr
Assay Min. 99.9% Min. 99.9%
Residue After Evaporation Max. 1 ppm Max. 0.8 ppm Max. 1 ppm
Water Max. 0.02% Max. 0.01%
LC Gradient Suitability at 254 and 220nm Passes Test
LC Gradient Suitability at 254 and 210nm Passes Test
LC Gradient Suitability at 254 and 205nm Passes Test
Titratable acid, mEQ/g Max. 0.0003 Max. 0.008
Titratable acid, mEQ/g Max. 0.0002 Max. 0.0006
LCMS Gradient Suitability Passes Test Passes Test Passes Test
LCMS at Positive Mode as Reserpine Max. 50 ppb Max. 50 ppb Max. 50 ppb
LCMS at Negative Mode as Aldicarb Max. 50 ppb Max. 50 ppb Max. 50 ppb
Protease Not Detected
Total Halogens (as Chloride) Not Detected
Optical Absorbance (au) 190nm 1.00 195nm 0.15 200nm 0.05 205nm 0.04 210nm 0.50 0.03 0.01 214nm 0.40 215nm 0.025 220nm 0.20 0.015 0.01 225nm 0.015 230nm 0.10 0.01 0.01 240nm 0.01 254nm 0.01 0.005 0.005 260nm 0.005 0.005 280nm 0.005 0.005 0.005
Aluminum (Al) Max. 10 ppb Max. 25 ppb Max. 10 ppb
Barium (Ba) Max. 10 ppb Max. 5 ppb Max. 10 ppb
Cadmium (Cd) Max. 10 ppb Max. 5 ppb Max. 10 ppb
Calcium (Ca) Max. 20 ppb Max. 25 ppb Max. 20 ppb
Chromium (Cr) Max. 10 ppb Max. 5 ppb Max. 10 ppb
Cobalt (Co) Max. 10 ppb Max. 5 ppb Max. 10 ppb
Copper (Cu) Max. 10 ppb Max. 5 ppb Max. 10 ppb
Iron (Fe) Max. 10 ppb Max. 5 ppb Max. 10 ppb
Lead (Pb) Max. 10 ppb Max. 5 ppb Max. 10 ppb
Magnesium (Mg) Max. 10 ppb Max. 10 ppb Max. 10 ppb
Manganese (Mn) Max. 10 ppb Max. 5 ppb Max. 10 ppb
Nickel (Ni) Max. 10 ppb Max. 5 ppb Max. 10 ppb
Potassium (K) Max. 10 ppb Max. 10 ppb Max. 10 ppb
Silver (Ag) Max. 10 ppb Max. 5 ppb Max. 10 ppb
Sodium (Na) Max. 20 ppb Max. 50 ppb Max. 20 ppb
Tin (Sn) Max. 10 ppb Max. 5 ppb Max. 10 ppb
Zinc (Zn) Max. 10 ppb Max. 10 ppb Max. 10 ppb
Liquid Chromatography Mass Spectometry has become a crucial technique for investigative analysis. Tedia
LC/MS solvents are use-tested to ensure minimal interference from volatile organics, high-molecular weight
compounds, and other impurities.
22
23
USP/NFTedia USP & NF grade solvents conform to the purity and certification requirements established by the United
States Pharmacopeia and the National Formulary. In addition, Tedia offers a wide range of solvents suitable for
testing USP & NF monographs.
AU1002 Acetone NF 4L
BU0229 n-Butyl Alcohol NF 4L
DU1027 Dichloromethane NF 4L
EU1510 Ethyl Acetate NF 4L
MU1952 Methyl Isobutyl Ketone NF 4L
AU0106 Acetic Acid Glacial USP 4L
DU0461 Dimethyl Sulfoxide USP 4L
PU1501 Isopropyl Alcohol USP 4L
The following products meet reagent specifications for testing products as required in USP/NF monographs.
AR0114 Acetone ACS 1L, 4L, 20L, 204L
AR0116 Acetonitrile ACS 1L, 4L, 20L, 204L
AR0123 Alcohol, Anhydrous, Reagent ACS 1L, 4L, 20L, 204L
AR0162 n-Amyl Alcohol ACS 1L, 4L
AR0170 Aniline ACS 1L, 4L
BR0284 n-Butyl Acetate ACS 1L, 4L
BR0292 n-Butyl Alcohol ACS 1L, 4L, 20L
BR0294 tert-Butyl Alcohol ACS 1L, 4L
CR0335 Carbon Disulfide ACS 1L
CR0353 Chlorobenzene ACS 1L, 4L, 20L
CR0360 Chloroform (stabilized with Amylene) ACS 1L, 4L, 20L, 204L
CR0359 Chloroform (stabilized with Ethanol) ACS 1L, 4L, 20L, 204L
CR0392 Cyclohexane ACS 1L, 4L, 20L, 204L
DR0405 Decyl Alcohol Certified 1L
DR0418 Dichloroacetic Acid Certified 500ml
DR0440 Dichloromethane ACS 1L, 4L, 20L, 204L
DR0469 Dimethyl Sulfoxide ACS 1L, 4L, 20L
DS1461 Dimethyl Sulfoxide HPLC/Spectro 1L, 4L
DR0456 N,N-Dimethylformamide ACS 1L, 4L, 20L
DR0480 1,4-Dioxane ACS 1L, 4L, 20L
DR0486 1-Dodecanol ACS 1L, 4L
ER0511 Ethyl Acetate ACS 1L, 4L, 20L, 204L
ER0550 Ethyl Ether Anhydrous ACS 1L, 4L, 20L, 204L
ER0551 Ethyl Ether (stabilized with Ethanol) ACS 1L, 4L, 20L, 204L
FR0626 Formamide ACS 1L, 4L
FR0628 Formic Acid 88% ACS 1L, 4L
FR0629 Formic Acid 96% ACS 1L, 4L
GR0725 Glycerol ACS 1L, 4L
HR0801 Hexanes ACS 1L, 4L, 20L, 204L
HR0870 Hydrochloric Acid 37% ACS 500ml, 2.5L
CaTaLog numbEr ChEmICaL gradE PaCkagE SIzE
24
nEw CaTaLog numbEr ChEmICaL gradE PaCkagE SIzE
HR0881 Hydrofluoric Acid ACS 500ml, 4L
HR0885 Hydrogen Peroxide 30% ACS 500ml, 4L
BR0290 Isobutyl Alcohol ACS 1L, 4L
PR1490 Isopropyl Alcohol ACS 1L, 4L, 20L, 204L
MR1272 Methyl Alcohol ACS 1L, 4L, 20L, 204L
MR1275 Methyl Ethyl Ketone ACS 1L, 4L, 20L, 204L
MR1279 Methyl Isobutyl Ketone ACS 1L, 4L, 20L
MR1281 Methyl Propyl Ketone Certified 1L, 4L
NR1320 Nitric Acid ACS 500ml, 2.5L
PR1423 Perchloric Acid (69-72%) ACS 500ml, 2.5L
PR1435 Phosphoric Acid 85% ACS 500ml, 2.5L
PR1491 n-Propyl Alcohol ACS 1L, 4L
SR1789 Sulfuric Acid ACS 500ml, 2.5L
TS1819 Tetrabutylammonium Hydroxide in Water (1M) HPLC 500ml, 4L
TR1825 Tetrahydrofuran (stabilized with BHT) ACS 1L, 4L, 20L, 204L
TS2121 Tetrahydrofuran (unstabilized) HPLC/Spectro 1L, 4L
TR1850 Toluene ACS 1L, 4L, 20L, 204L
TR1870 2,2,4-Trimethylpentane ACS 1L, 4L, 20L, 204L
XR2242 m-Xylene Certified 1L, 4L
XR2250 Xylenes ACS 1L, 4L, 20L, 204L
USP/NF (continued)
25
mission Statement
We are a product-driven company that excels in providing high-purity solvents globally for life
science, biotechnology, pharmaceutical, laboratory, and industrial applications. Through contin-
uous improvement of our products, processes and services, we help our customers improve
lives around the world.
We bring new opportunities to our customers, suppliers, and employees. Together, we learn,
teach, and grow using our strengths: purification and flexibility.
We reinvest in the company and in the employees to ensure long-term growth and
continued success.
We strive to be a good neighbor in the world by operating ethically, in an environmentally safe
manner, and by sharing our success with the local and global communities.
Core values
Respect: We will honor our relationships with our employees, customers and vendors by de-
veloping trust and maintaining respect in all that we do.
Opportunities for employees: We will attract, develop and retain talented and diverse people,
and provide a work environment that is safe, encourages new ideas, demands accountability,
and rewards performance.
Teamwork: We will work as a team to improve efficiencies and share knowledge and experi-
ence to accomplish our mission. Helping one another helps us all.
Excellence: We will demand excellence in our customers, suppliers and co-workers.
Tedia
26
Cross Reference by Grade
JT BAKER TEdIaAnalyzed . . . . . . . . . . . CertifiedAnalyzed ACS. . . . . . . . ACSBio-Analyzed. . . . . . . . . BIOHPLC . . . . . . . . . . . . . HPLC/SpectroInstra-Analyzed . . . . . . . TracemetalLC/MS . . . . . . . . . . . . LC/MSPhotrex . . . . . . . . . . . . Spectro or HPLC/SpectroPurified/Practical/Technical PurifiedUltra-Resi . . . . . . . . . . . GCUltrex II . . . . . . . . . . . . . Tracemetal Plus
BURDICK & JACKSON TEdIa ACS/HPLC . . . . . . . . . . HPLC/ACS or HPLC/SpectroAnhydrous . . . . . . . . . . AnhydrosolvB&J. . . . . . . . . . . . . . . Absolv, HPLC/Spectro or GC depending on applicationB&J Non-Spectro . . . . . GCBioSyn. . . . . . . . . . . . . BioGC2 . . . . . . . . . . . . . . GCLaboratory Plus . . . . . . . ACSPurified Plus . . . . . . . . . ACS
EMD . . . . . . . . . . . . . . . TEdIa Biosynthesis . . . . . . . . . BioGR . . . . . . . . . . . . . . . ACSHPLC . . . . . . . . . . . . . HPLC/SpectroHR-GC . . . . . . . . . . . . GCLC-MS . . . . . . . . . . . . LC/MSOmniSolve . . . . . . . . . . Absolv, HPLC/Spectro or GC depending on applicationOmniTrace . . . . . . . . . . TracemetalPractical . . . . . . . . . . . . PurifiedResidue . . . . . . . . . . . . GC
FISHER TEdIa Biotechnology . . . . . . . . BioCertified . . . . . . . . . . . . Certified Certified ACS . . . . . . . . ACSGC Resolv . . . . . . . . . . GCHPLC . . . . . . . . . . . . . HPLC/SpectroLaboratory/Technical . . . PurifiedOptima Acids . . . . . . . . Tracemetal PlusOptiDry . . . . . . . . . . . . AnhydrosolvOptima . . . . . . . . . . . . Absolv, HPLC/Spectro or GC depending on applicationOptima LC/MS . . . . . . . LC/MS Pesticide . . . . . . . . . . . GCSpectranalyzed . . . . . . . Spectro or HPLC/SpectroTraceMetal . . . . . . . . . . Tracemetal
MALLINCKRODT TEdIaACS . . . . . . . . . . . . . . ACSAR . . . . . . . . . . . . . . . CERTIFIEDAR Select. . . . . . . . . . . TracemetalAR Select Plus . . . . . . . Tracemetal PlusChromAR. . . . . . . . . . . HPLC/SpectroGenAR . . . . . . . . . . . . BioLab/OR/Practical/ Purified/Technical . . . . Purified or CertifiedNano . . . . . . . . . . . . . . GCSpectrAR . . . . . . . . . . . Spectro or HPLC/SpectroUltimAR . . . . . . . . . . . . Absolv
ALDRICH TEdIaACS . . . . . . . . . . . . . . ACSAnhydrous . . . . . . . . . . AnhydrosolvBiotech . . . . . . . . . . . . BioCapillary GC . . . . . . . . . GCChromasolv LC-MS . . . . LC/MSChromasolv HPLC. . . . . HPLC/Spectro or HPLC/ACS depending on applicationChromasolv Plus . . . . . . Absolv or HPLC/Spectro depending on applicationChromasolv Gradient . . . HPLC/SpectroHistological . . . . . . . . . . HistologicalPRA/Pesticide Residue GCReagent . . . . . . . . . . . . ACS, Certified, or Purified depending on applicationReagent Plus . . . . . . . . ACS, Certified, or Purified depending on applicationSpectrophotometric . . . . Spectro or HPLC/Spectro
26
27
ABSOLV Specially distilled to purity levels exceeding the requirements for HPLC, TLC, GC, and pesticide residue analysis.
ACS Reagent chemicals that meet the American Chemical Society standards for reagent purity.
ACS PLUS Solvents meeting or exceeding the ACS Specifications and analyzed for 15 metals.
ANHYDROSOLV Solvents specially dried to meet a water specification of 10 – 50 ppm.
BIO Solvents specially purified and analyzed for biotechnology applications, including peptide and oligonucleotide synthesis.
CERTIFIED Reagent chemicals manufactured to Tedia’s established purity standard. Purity is guaranteed not to exceed published maximum limits of impurities.
CERTIFIED PLUS Solvents meeting or exceeding Tedia’s established purity standards and additionally analyzed for 15 metals.
GC A premium grade of ultra purity solvents developed for organic residue extraction/concentration procedures at ppt levels by GC-ECD and ppb levels by GC-FID.
HISTOLOGICAL Solvents suitable for histology.
HPLC/ACS Solvents specially purified for preparative scale liquid chromatography, pharmaceutical production, organic synthesis, or simply washing apparatus. These solvents exceed ACS specifications.
HPLC/SPECTRO Solvents pur i f ied for standard chromatography requirements in HPLC and spectrophotometry procedures.
LC/MS A premium grade of ultra purity solvents developed specifically for LC/MS applications.
PURIFIED Chemicals of reasonable purity for situations where no official standards for quality or impurity levels exist.
TRACEMETAL Acids manufactured to achieve very low metal contamination (in ppb range). Primarily used in digestion of samples prior to ICP analysis. Each lot is analyzed for 32 metals by ICP/MS.
TRACEMETAL PLUS For critical trace metal analyses. These acids are manufactured by proprietary distillation technology to achieve low metal contamination in ppt range. Each lot is analyzed for over 65 metals by ICP/MS.
USP/NF Solvents that meet purity and analytical requirements established in the United States Pharmacopoeia or National Formulary.
Quality Designations27
28
TEdIa CaTaLog gaS ChEmICaL gradE numbEr hPLC SPECTroPhoTomETrY ChromaTograPhY
Solvent Selection Guide
Acetic Acid Glacial HPLC AS1102 x
Acetic Acid Glacial USP AU0106
Acetone Absolv AA1111 x x x
Acetone GC AG2800 x
Acetone ACS AR0114
Acetone ACS Plus AR2501
Acetone HPLC/Spectro AS1112 x x
Acetone HPLC/ACS AS3300 x x
Acetone NF AU1002
Acetonitrile Absolv AA1121 x x x
Acetonitrile Bio AB1124
Acetonitrile GC AG2802 x
Acetonitrile Anhydrosolv AH3801
Acetonitrile LC/MS AL1129
Acetonitrile ACS AR0116
Acetonitrile ACS Plus AR2504
Acetonitrile HPLC/Spectro AS1122 x x
Acetonitrile HPLC/Spectro AS1126 x x
Acetonitrile HPLC/ACS AS1127 x x
Activator Solution (0.25M DCI in Acetonitrile) Bio AB3963
Activator Solution (0.25M ETT in Acetonitrile) Bio AB3962
Activator Solution (0.2M BMT in Acetonitrile) Bio AB3964
Activator Solution (0.3M BMT in Acetonitrile) Bio AB3961
Activator Solution (0.5M ETT in Acetonitrile) Bio AB3959
Alcohol, Anhydrous, Reagent ACS AR0123
Alcohol, Anhydrous, Reagent ACS Plus AR2507
Alcohol, Anhydrous, Reagent HPLC/Spectro AS1131 x x
Alcohol, Anhydrous, Reagent HPLC/ACS AS3308 x x
n-Amyl Alcohol ACS AR0162
Aniline ACS AR0170
n-Butyl Acetate ACS BR0284
n-Butyl Acetate ACS Plus BR2510
n-Butyl Acetate HPLC/Spectro BS1221 x x
n-Butyl Alcohol GC BG1242 x
n-Butyl Alcohol ACS BR0292
n-Butyl Alcohol ACS Plus BR2514
n-Butyl Alcohol HPLC/Spectro BS1241 x x
n-Butyl Alcohol NF BU0229
tert-Butyl Alcohol ACS BR0294
tert-Butyl Alcohol ACS Plus BR2517
tert-Butyl Alcohol HPLC/Spectro BS4047 x x
Butyl Ether Anhydrosolv BH3815
Cap A (1-Methylimidazole in Acetonitrile, 1:9) Bio CB3974
Cap A (1-Methylimidazole in Acetonitrile, 2:8) Bio CB3976
Cap A (Acetic Anhydride in THF, 1:9) Bio CB3965
28
29
bIoLogICaL organIC SYnThESIS dna SYnThESIS SYnThESIS PharmaCoLogICaL LC-mS
x
x
x
x
x
x x
x x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
29
30
TEdIa CaTaLog gaS ChEmICaL gradE numbEr hPLC SPECTroPhoTomETrY ChromaTograPhY
Solvent Selection Guide (continued)
Cap A (Acetic Anhydride, 2,6-Lutidine in THF, 1:1:8) Bio CB3970
Cap A (Acetic Anhydride, Pyridine in THF, 1:1:8) Bio CB3975
Cap B (1-Methylimidazole in THF, 1:9) Bio CB3980
Cap B (1-Methylimidazole in THF, 16:84) Bio CB3979
Cap B (1-Methylimidazole, Pyridine in THF, 1:1:8) Bio CB3985
Cap B (Acetic Anhydride in Acetonitrile, 1:9) Bio CB3984
Cap B 1 (Acetic Anhydride in Acetonitrile, 4:6) Bio CB3982
Cap B 2 (2,6-Lutidine in Acetonitrile, 6:4) Bio CB3983
Carbon Disulfide Absolv CA1300 x x
Carbon Disulfide ACS CR0335
Carbon Disulfide Spectro CS1301 x
Chlorobenzene ACS CR0353
Chlorobenzene HPLC/Spectro CS1311 x x
1-Chlorobutane HPLC/Spectro CS1321 x x
Chloroform w/Amylene Absolv CA1331 x x x
Chloroform w/Amylene GC CG2804 x
Chloroform w/Amylene Anhydrosolv CH3827
Chloroform w/Amylene ACS CR0360
Chloroform w/Amylene ACS Plus CR2521
Chloroform w/Amylene HPLC/Spectro CS1332 x x
Chloroform w/Amylene HPLC/ACS CS3315 x x
Chloroform w/Ethanol Absolv CA1330 x x x
Chloroform w/Ethanol GC CG2805 x
Chloroform w/Ethanol Anhydrosolv CH3830
Chloroform w/Ethanol ACS CR0359
Chloroform w/Ethanol ACS Plus CR2523
Chloroform w/Ethanol HPLC/Spectro CS1334 x x
Chloroform w/Ethanol HPLC/ACS CS3317 x x
Cyclohexane Absolv CA1343 x x x
Cyclohexane GC CG1342 x
Cyclohexane Anhydrosolv CH3833
Cyclohexane ACS CR0392
Cyclohexane ACS Plus CR2527
Cyclohexane HPLC/Spectro CS1341 x x
Cyclopentane 75% HPLC/Spectro CS1351 x x
Deblock Solution, 1% TCA in DCM (w/v) Bio DB3992
Deblock Solution, 2% TCA in DCM (w/v) Bio DB3991
Deblock Solution, 3% DCA in DCM (v/v) Bio DB3988
Deblock Solution, 3% DCA in Toluene (v/v) Bio DB0490
Deblock Solution, 3% TCA in DCM (w/v) Bio DB3990
Deblock Solution, 5% DCA in Toluene (v/v) Bio DB3993
Decyl Alcohol Certified DR0405
Dichloroacetic Acid Certified DR0418
o-Dichlorobenzene HPLC/Spectro DS1411 x x
1,2-Dichloroethane Absolv DA1420 x x x
30
31
bIoLogICaL organIC SYnThESIS dna SYnThESIS SYnThESIS PharmaCoLogICaL LC-mS
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
31
32
TEdIa CaTaLog gaS ChEmICaL gradE numbEr hPLC SPECTroPhoTomETrY ChromaTograPhY
Solvent Selection Guide (continued)
1,2-Dichloroethane Anhydrosolv DH3839
1,2-Dichloroethane HPLC/Spectro DS1421 x x
Dichloromethane Absolv DA1431 x x x
Dichloromethane Bio DB2795
Dichloromethane GC DG2810 x
Dichloromethane Anhydrosolv DH3842
Dichloromethane ACS DR0440
Dichloromethane ACS Plus DR2532
Dichloromethane HPLC/Spectro DS1432 x x
Dichloromethane HPLC/ACS DS3325 x x
Dichloromethane NF DU1027
Dimethyl Sulfoxide Bio DB0460
Dimethyl Sulfoxide Anhydrosolv DH3845
Dimethyl Sulfoxide ACS DR0469
Dimethyl Sulfoxide HPLC/Spectro DS1461 x x
Dimethyl Sulfoxide USP DU0461
N,N-Dimethylacetamide Anhydrosolv DH3848
N,N-Dimethylacetamide HPLC/Spectro DS1441 x x
N,N-Dimethylformamide Bio DB0455
N,N-Dimethylformamide Anhydrosolv DH3851
N,N-Dimethylformamide ACS DR0456
N,N-Dimethylformamide ACS Plus DR2536
N,N-Dimethylformamide HPLC/Spectro DS1451 x x
1,4-Dioxane Anhydrosolv DH3854
1,4-Dioxane ACS DR0480
1,4-Dioxane HPLC/Spectro DS1471 x x
1-Dodecanol ACS DR0486
Ethyl Acetate Absolv EA1511 x x x
Ethyl Acetate GC EG2815 x
Ethyl Acetate Anhydrosolv EH3857
Ethyl Acetate ACS ER0511
Ethyl Acetate ACS Plus ER2540
Ethyl Acetate HPLC/Spectro ES1512 x x
Ethyl Acetate HPLC/ACS ES3335 x x
Ethyl Acetate NF EU1510
Ethyl Ether Anhydrous Absolv EA1530 x x x
Ethyl Ether Anhydrous GC EG1532 x
Ethyl Ether Anhydrous Anhydrosolv EH3860
Ethyl Ether Anhydrous ACS ER0550
Ethyl Ether Anhydrous ACS Plus ER2543
Ethyl Ether Anhydrous HPLC/Spectro ES1531 x x
Ethyl Ether w/Ethanol Absolv EA1535 x x x
Ethyl Ether w/Ethanol GC EG1537 x
Ethyl Ether w/Ethanol ACS ER0551
32
33
bIoLogICaL organIC SYnThESIS dna SYnThESIS SYnThESIS PharmaCoLogICaL LC-mS
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
33
34 Solvent Selection Guide (continued)
Ethyl Ether w/Ethanol HPLC/Spectro ES1536 x x
Ethylene Glycol Spectro ES1520 x
Ethylene Glycol Dimethyl Ether Anhydrosolv EH3866
Ethylene Glycol Dimethyl Ether HPLC/Spectro ES4083 x x
Ethylene Glycol Monoethyl Ether Spectro ES0540 x
Ethylene Glycol Monomethyl Ether HPLC/Spectro ES1911 x x
Formamide ACS FR0626
Formic Acid 88% ACS FR0628
Formic Acid 96% ACS FR0629
Formic Acid 96% HPLC FS0630 x
Glycerol Bio GB1610
Glycerol ACS GR0725
Glycerol Spectro GS1611 x
n-Heptane 96% Absolv HA1709 x x x
n-Heptane 96% HPLC/Spectro HS1711 x x
n-Heptane 99% Absolv HA1708 x x x
n-Heptane 99% Anhydrosolv HH3869
n-Heptane 99% HPLC/Spectro HS1712 x x
n-Hexane 95% Absolv HA1721 x x x
n-Hexane 95% GC HG2820 x
n-Hexane 95% HPLC/Spectro HS1722 x x
n-Hexane 95% HPLC/ACS HS3341 x x
n-Hexane 99% HPLC/Spectro HS4721 x x
Hexanes Absolv HA0800 x x x
Hexanes GC HG0808 x
Hexanes Anhydrosolv HH0803
Hexanes ACS HR0801
Hexanes HPLC/ACS HS0805 x x
Hexanes HPLC/Spectro HS0806 x x
Hydrochloric Acid 37% ACS HR0870
Hydrofluoric Acid ACS HR0881
Hydrogen Peroxide 30% ACS HR0885
Isobutyl Alcohol ACS BR0290
Isobutyl Alcohol ACS Plus BR2558
Isobutyl Alcohol HPLC/Spectro BS1231 x x
Isopropyl Alcohol Absolv PA2031 x x x
Isopropyl Alcohol GC PG2033 x
Isopropyl Alcohol Anhydrosolv PH3881
Isopropyl Alcohol ACS PR1490
Isopropyl Alcohol ACS Plus PR2561
Isopropyl Alcohol HPLC/Spectro PS2032 x x
Isopropyl Alcohol HPLC/ACS PS3370 x x
Isopropyl Alcohol USP PU1501
Methyl Alcohol Absolv MA1921 x x x
Methyl Alcohol Bio MB1920
34
TEdIa CaTaLog gaS ChEmICaL gradE numbEr hPLC SPECTroPhoTomETrY ChromaTograPhY
35
bIoLogICaL organIC SYnThESIS dna SYnThESIS SYnThESIS PharmaCoLogICaL LC-mS
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
35
36
TEdIa CaTaLog gaS ChEmICaL gradE numbEr hPLC SPECTroPhoTomETrY ChromaTograPhY
Solvent Selection Guide (continued)
Methyl Alcohol GC MG2826 x
Methyl Alcohol Anhydrosolv MH3887
Methyl Alcohol LC/MS ML1919
Methyl Alcohol ACS MR1272
Methyl Alcohol ACS Plus MR2565
Methyl Alcohol HPLC/Spectro MS1922 x x
Methyl Alcohol HPLC/ACS MS3350 x x
Methyl Ethyl Ketone ACS MR1275
Methyl Ethyl Ketone ACS Plus MR2571
Methyl Ethyl Ketone HPLC/Spectro MS1931 x x
Methyl Formate Spectro MS1941 x
Methyl Isobutyl Ketone ACS MR1279
Methyl Isobutyl Ketone ACS Plus MR2576
Methyl Isobutyl Ketone HPLC/Spectro MS1951 x x
Methyl Isobutyl Ketone NF MU1952
Methyl Propyl Ketone Certified MR1281
Methyl t-Butyl Ether Absolv MA1970 x x x
Methyl t-Butyl Ether GC MG1972 x
Methyl t-Butyl Ether HPLC/Spectro MS1971 x x
1-Methyl-2-pyrrolidinone Bio MB1283
1-Methyl-2-pyrrolidinone Anhydrosolv MH3903
1-Methyl-2-pyrrolidinone HPLC/Spectro MS1961 x x
Methylcyclohexane HPLC/Spectro MS4110 x x
1-Methylimidazole Bio MB1288
Nitric Acid ACS NR1320
1-Octanol HPLC/Spectro OS1373 x x
Oxidation Solution
(0.02M Iodine in THF/Pyridine/Water, 70:20:10) Bio OB9911
Oxidation Solution
(0.02M Iodine in THF/Pyridine/Water, 89.6/0.4/10) Bio OB9910
Oxidation Solution
(0.05M Iodine in Pyridine/Water, 90:10) Bio OB3994
Oxidation Solution
(0.1M Iodine in THF/Pyridine/Water, 78:20:2) Bio OB9914
Pentane Absolv PA2013 x x x
Pentane GC PG2835 x
Pentane Anhydrosolv PH3906
Pentane HPLC/Spectro PS2011 x x
Perchloric Acid (69-72%) ACS PR1423
Petroleum Ether 35-60°C Absolv PA2019 x x x
Petroleum Ether 35-60°C GC PG2840 x
Petroleum Ether 35-60°C Anhydrosolv PH3909
Phosphoric Acid 85% ACS PR1435
Phosphoric Acid 85% HPLC PS1434 x
n-Propyl Alcohol ACS PR1491
36
37
bIoLogICaL organIC SYnThESIS dna SYnThESIS SYnThESIS PharmaCoLogICaL LC-mS
x
x
x
x
x
x
x
x
x
x
x
x
x x
x
x
x
x
x
x
x
x
x
x
37
38
TEdIa CaTaLog gaS ChEmICaL gradE numbEr hPLC SPECTroPhoTomETrY ChromaTograPhY
Solvent Selection Guide (continued)
n-Propyl Alcohol HPLC/Spectro PS2041 x x
Propylene Carbonate Anhydrosolv PH3915
Pyridine Bio PB2050
Pyridine Anhydrosolv PH3918
Pyridine ACS Plus PR2587
Pyridine HPLC/Spectro PS2051 x x
Sulfuric Acid ACS SR1789
Tetrabutylammonium Hydroxide in Water (1M) HPLC TS1819 x
Tetrachloroethylene HPLC/Spectro TS2111 x x
Tetrahydrofuran/BHT Anhydrosolv TH3924
Tetrahydrofuran/BHT ACS TR1825
Tetrahydrofuran/BHT HPLC TS2123 x
Tetrahydrofuran/No BHT Bio TB2120
Tetrahydrofuran/No BHT Anhydrosolv TH3927
Tetrahydrofuran/No BHT HPLC/Spectro TS2121 x x
Toluene Absolv TA2131 x x x
Toluene GC TG2133 x
Toluene Anhydrosolv TH3930
Toluene ACS TR1850
Toluene ACS Plus TR2594
Toluene HPLC/Spectro TS2132 x x
Toluene HPLC/ACS TS3380 x x
1,2,4-Trichlorobenzene HPLC/Spectro TS2141 x x
Trichloroethylene Spectro TS2151 x
Triethylamine HPLC TS2165 x
Trifluoroacetic Acid Bio TB4297
Trifluoroacetic Acid HPLC TS4295 x
2,2,4-Trimethylpentane Absolv TA2171 x x x
2,2,4-Trimethylpentane GC TG2173 x
2,2,4-Trimethylpentane ACS TR1870
2,2,4-Trimethylpentane ACS Plus TR2596
2,2,4-Trimethylpentane HPLC/Spectro TS2172 x x
2,2,4-Trimethylpentane HPLC/ACS TS3390 x x
Water LC/MS WL2212
Water HPLC WS2211 x
m-Xylene Certified XR2242
o-Xylene HPLC/Spectro XS2311 x x
p-Xylene HPLC/Spectro XS2247 x x
Xylenes ACS XR2250
Xylenes ACS Plus XR2599
38
39
bIoLogICaL organIC SYnThESIS dna SYnThESIS SYnThESIS PharmaCoLogICaL LC-mS
x
x x
x
x
x
x
x
x
x x
x
x
x
x
x
x
x
x
x
x
x
x
39
40
National FireProtection Association
NFPA Code4
Root Product Number
ApplicationData
Product Specifications
Tedia Product Listing &Product Information Codes
FORMIC ACID 96% HCO
2H FW 46.03 CAS 64-18-6
MP 8.2-8.4°C BP 100-101°C D 1.220 Merck Index 13,4265 FP 68°C NFPA 3-2-0 Storage Code: WHITE IMO Formic Acid, 8, UN1779, PG II
aCS fr0629 Meets reagent specifications for testing USP/NF monographs.
SPECIfICaTIonS Acetic Acid Max. 0.4 % Ammonium Max. 0.005 % Assay Min. 96.0 % Chloride (Cl) Max. 0.001 % Color (APHA) Max. 15
PaCkagIng Product number unit Size Case Size FR0629-065 1L 1L Amber Glass FR0629-002 1L 6x1L Amber Glass
1MERCK INDEXThe Merck Index monograph numbers are cited from The Merck Index, Thirteenth Edition.
2INTERNATIONAL MARITIME ORGANIZATION (IMO) HAZARD CLASS CODE Class 3 - Flammable Liquids Class 4 - Flammable Solids 4.1 - Flammable Solids 4.2 - Spontaneously Combustible 4.3 - Dangerous When Wet Class 5 - Oxidizing Substances 5.1 - Oxidizers 5.2 - Organic Peroxides Class 6 - Poisonous (Toxic) Substances 6.1 – Poisonous (Toxic) Substances Class 8 - Corrosives Class 9 - Miscellaneous Dangerous SubstancesThe UN number and packaging group (PG) are also listed next to IMO number when applicable as added information.
3CHEMICAL ABSTRACTS SERVICE REGISTRY NUMBERThe Chemical Abstracts Service (CAS) Registry Number provides you with a key to access the wealth of information available through CAS. CAS is a division of the American Chemical Society. For details on how to search CAS files and databases using the Registry Numbers, please contract: Chemical Abstracts Service Customer Care P.O. Box 3012 Columbus, Ohio 43210 USA Phone 614-447-3700
4NATIONAL FIRE PROTECTION ASSOCIATION (NFPA) CODEReading from left to right, the digits indicate Health, Flammability, and Reactivity ratings. Numbers designate degree of hazard (from 4/greatest to 0/least). Special warning is denoted by letters.
5TEDIA RECOMMENDED STORAGE CODES (based on primary hazard)RED = Flammable Hazard YELLOW = Oxidation HazardBLUE = Toxic Hazard WHITE = Corrosive HazardGREEN = No Hazard
ChemicalName
Chemical Abstracts Service Registry3
Boiling Point
Chemical Synonyms
Density at25˚C (g/ml)
FormulaWeight
Purity Grade
Flash PointLineFormula
AvailablePackaging
Merck Index13th Edition1
Recommended Storage Code5
International Maritime Organization
Hazard Class Code3
Melting Point
Package-Specific Product Number
41
For more information, please contact us at
T 800.PURITY.1 (USA)
513.874.5340 (International)
F 1.513.874.5346
www.tedia.com
TEDIA COMPANY, INC.
1000 Tedia Way
Fairfield, OH 45014 USA
Alphabetical Listing of Products
42ACETIC ACID GlACIAl CH
3CO
2H FW 60.05 CAS 64-19-7
MP 15-16°C BP 116-117°C D 1.049 Merck Index 13,56 FP 40°C NFPA 3-2-2 Storage Code: WHITE IMO Acetic Acid, Glacial, 8 (3), UN2789, PG II
physical properties Boiling Range (760mm) 116-117°C Density (g/ml) at 25°C 1.049 Dielectric Constant at 25°C 6.1 Elutropic Value (Silica) 0.73 Refractive Index (n20°/D) 1.3715 Viscosity (cps) at 25°C 1.10 1.10
acs ar0104
specifications Acetic Anhydride Max. 0.01 % Assay Min. 99.7 % Chloride (Cl) Max. 1 ppm Color (APHA) Max. 10 Dilution Test Passes Test Heavy Metals (as Pb) Max. 0.5 ppm Iron (Fe) Max. 0.2 ppm Residue after Evaporation Max. 0.001 % Substances Reducing Dichromate Passes Test Substances Reducing Permanganate Passes Test Sulfate Max. 1 ppm Titrable Base Max. 0.0004 meq/g
packaging product number Unit size case size AR0104-059 2.5L 2.5L Amber Glass AR0104-014 2.5L 4x2.5L Amber Glass AR0104-037 204L 204L Poly Drum AR0104-031 20L 20L Poly Pail AR0104-048 4L 4L Amber Glass AR0104-001 4L 4x4L Amber Glass AR0104-053 500ml 500ml Amber Glass AR0104-013 500ml 6x500ml Amber Glass
hplc as1102
For Use in High Performance Liquid Chromatography
specifications Assay Min. 99.7 % Color (APHA) Max. 10 Residue after Evaporation Max. 5 ppm Water Max. 0.1 % Optical Absorbance at 255 nm Max. 1.00 280 nm Max. 0.05 350 nm Max. 0.02
packaging product number Unit size case size AS1102-065 1L 1L Amber Glass AS1102-002 1L 6x1L Amber Glass AS1102-059 2.5L 2.5L Amber Glass AS1102-014 2.5L 4x2.5L Amber Glass
traceMetal ae4001
Packaged under Nitrogen Concentration of some elements may change over time due to storage in glass container.
specifications Assay (Acetic Acid) Min. 99 % Color (APHA) Max. 10 Chloride (Cl) Max. 1 ppm Phosphate (PO4) Max. 1 ppm Sulfate (SO4) Max. 0.5 ppm Substances Reducing Dichromate Passes Test Substances Reducing Permanganate Passes Test Aluminum (Al) Max. 1 ppb Antimony (Sb) Max. 1 ppb Arsenic (As) Max. 1 ppb Barium (Ba) Max. 1 ppb Beryllium (Be) Max. 1 ppb Bismuth (Bi) Max. 1 ppb Cadmium (Cd) Max. 1 ppb Calcium (Ca) Max. 1 ppb Cerium (Ce) Max. 0.5 ppb Cesium (Cs) Max. 0.5 ppb Chromium (Cr) Max. 1 ppb Cobalt (Co) Max. 1 ppb Copper (Cu) Max. 1 ppb Dysprosium (Dy) Max. 0.5 ppb Erbium (Er) Max. 0.5 ppb Europium (Eu) Max. 0.5 ppb Gadolinium (Gd) Max. 0.5 ppb Gallium (Ga) Max. 0.5 ppb Germanium (Ge) Max. 0.5 ppb Hafnium (Hf ) Max. 0.5 ppb Holmium (Ho) Max. 0.5 ppb Indium (In) Max. 0.5 ppb Iron (Fe) Max. 1 ppb Lanthanum (La) Max. 0.5 ppb Lead (Pb) Max. 1 ppb Lithium (Li) Max. 1 ppb Lutetium (Lu) Max. 0.5 ppb Magnesium (Mg) Max. 1 ppb Manganese (Mn) Max. 1 ppb Molybdenum (Mo) Max. 1 ppb Neodymium (Nd) Max. 0.5 ppb Nickel (Ni) Max. 1 ppb Platinum (Pt) Max. 0.5 ppb Potassium (K) Max. 1 ppb Praseodymium (Pr) Max. 0.5 ppb Rhenium (Re) Max. 0.5 ppb Rhodium (Rh) Max. 0.5 ppb Rubidium (Rb) Max. 0.5 ppb Ruthenium (Ru) Max. 0.5 ppb Samarium (Sm) Max. 0.5 ppb Scandium (Sc) Max. 0.5 ppb Selenium (Se) Max. 1 ppb Silver (Ag) Max. 1 ppb Sodium (Na) Max. 1 ppb Strontium (Sr) Max. 1 ppb Tellurium (Te) Max. 0.5 ppb Terbium (Tb) Max. 0.5 ppb Thallium (Tl) Max. 0.5 ppb
43 Thorium (Th) Max. 1 ppb Thulium (Tm) Max. 0.5 ppb Tin (Sn) Max. 1 ppb Titanium (Ti) Max. 1 ppb Tungsten (W) Max. 0.5 ppb Uranium (U) Max. 1 ppb Vanadium (V) Max. 1 ppb Ytterbium (Yb) Max. 0.5 ppb Yttrium (Y) Max. 0.5 ppb Zinc (Zn) Max. 1 ppb Zirconium (Zr) Max. 1 ppb
packaging product number Unit size case size AE4001-058 2.5L 2.5L Flint Glass AE4001-011 2.5L 4x2.5L Flint Glass AE4001-071 500ml 500ml Flint Glass AE4001-068 500ml 6x500ml Flint Glass
traceMetal plUs ae4000
Packaged under Nitrogen Packaged in specially manufactured, precleaned Teflon® FEP bottles to protect product integrity.
specifications Assay (Acetic Acid) Min. 99 % Aluminum (Al) Max. 50 ppt Antimony (Sb) Max. 50 ppt Arsenic (As) Max. 50 ppt Barium (Ba) Max. 10 ppt Beryllium (Be) Max. 10 ppt Bismuth (Bi) Max. 10 ppt Cadmium (Cd) Max. 10 ppt Calcium (Ca) Max. 50 ppt Cerium (Ce) Max. 10 ppt Cesium (Cs) Max. 10 ppt Chromium (Cr) Max. 10 ppt Cobalt (Co) Max. 10 ppt Copper (Cu) Max. 50 ppt Dysprosium (Dy) Max. 1 ppt Erbium (Er) Max. 1 ppt Europium (Eu) Max. 1 ppt Gadolinium (Gd) Max. 1 ppt Gallium (Ga) Max. 10 ppt Germanium (Ge) Max. 10 ppt Hafnium (Hf ) Max. 10 ppt Holmium (Ho) Max. 1 ppt Indium (In) Max. 1 ppt Iron (Fe) Max. 50 ppt Lanthanum (La) Max. 1 ppt Lead (Pb) Max. 10 ppt Lithium (Li) Max. 10 ppt Lutetium (Lu) Max. 10 ppt Magnesium (Mg) Max. 50 ppt Manganese (Mn) Max. 10 ppt Molybdenum (Mo) Max. 10 ppt Neodymium (Nd) Max. 1 ppt Nickel (Ni) Max. 50 ppt Platinum (Pt) Max. 50 ppt
Potassium (K) Max. 50 ppt Praseodymium (Pr) Max. 1 ppt Rhenium (Re) Max. 10 ppt Rhodium (Rh) Max. 50 ppt Rubidium (Rb) Max. 10 ppt Ruthenium (Ru) Max. 50 ppt Samarium (Sm) Max. 1 ppt Scandium (Sc) Max. 10 ppt Selenium (Se) Report Only Silver (Ag) Max. 50 ppt Sodium (Na) Max. 100 ppt Strontium (Sr) Max. 10 ppt Tellurium (Te) Max. 1 ppt Terbium (Tb) Max. 1 ppt Thallium (Tl) Max. 10 ppt Thorium (Th) Max. 1 ppt Thulium (Tm) Max. 1 ppt Tin (Sn) Max. 50 ppt Titanium (Ti) Max. 10 ppt Tungsten (W) Max. 10 ppt Uranium (U) Max. 1 ppt Vanadium (V) Max. 10 ppt Ytterbium (Yb) Max. 1 ppt Yttrium (Y) Max. 1 ppt Zinc (Zn) Max. 50 ppt Zirconium (Zr) Max. 10 ppt
packaging product number Unit size case size AE4000-030 1L 1L Teflon Bottle AE4000-042 250ml 250ml Teflon Bottle AE4000-029 500ml 500ml Teflon Bottle
Usp aU0106
specifications Identification Passes Test Congealing Temperature Min. 15.6 ºC Nonvolatile Residue (USP), mg/20 mL Max. 1 Chloride Passes Test Sulfate Passes Test Heavy Metals (as Pb) Max. 5 ppm Readily Oxidizable Substances Passes Test Assay 99.5 - 100.5 %
packaging product number Unit size case size AU0106-048 4L 4L Amber Glass AU0106-001 4L 4x4L Amber Glass
Ace-
44ACETIC ANHYDRIDE (CH
3CO)
2O FW 102.09 CAS 108-24-7
MP -73°C BP 138-140°C D 1.082 Merck Index 13,57 FP 54°C NFPA 2-2-1 Storage Code: WHITE IMO Acetic Anhydride, 8 (3), UN1715, PG II
acs ar0108
specifications Assay Min. 97.0 % Chloride (Cl) Max. 5 ppm Heavy Metals (as Pb) Max. 2 ppm Iron (Fe) Max. 5 ppm Phosphate Max. 0.001 % Residue after Evaporation Max. 0.003 % Substances Reducing Permanganate Passes Test Sulfate Max. 5 ppm
packaging product number Unit size case size AR0108-065 1L 1L Amber Glass AR0108-002 1L 6x1L Amber Glass AR0108-048 4L 4L Amber Glass AR0108-001 4L 4x4L Amber Glass
ACETIC ACID METHYl ESTER See Methyl Acetate
ACETIC ETHERSee Ethyl Acetate
ACETIC OxIDESee Acetic Anhydride
ACETOACETIC ESTERSee Ethyl Acetoacetate
ACETONE CH
3COCH
3 FW 58.08 CAS 67-64-1
MP -94°C BP 56°C D 0.791 Merck Index 13,67 FP -17°C NFPA 1-3-0 Storage Code: RED IMO Acetone, 3, UN1090, PG II
physical properties Boiling Point (760mm) 56°C Density (g/ml) at 25°C 0.791 Dielectric Constant at 25°C 20.7 Elutropic Value (Silica) 0.43 Refractive Index (n20°/D) 1.359 Viscosity (cps) at 20°C .32 0.32
absolv aa1111
For Use in Liquid Chromatography, Spectrophotometry, and for Organic Residue Analysis Packaged under Nitrogen.
specifications Assay Min. 99.9 % Color (APHA) Max. 10 Fluorescence Background (as Quinine Sulfate) Max. 1 ppb GC-ECD Responsive Residue (as Heptachlor Epoxide) Max. 10 ppt GC-FID Responsive Residue (as 2-Octanol) Max. 5 ppb Residue after Evaporation Max. 1 ppm Water Max. 0.5 % Optical Absorbance at 330 nm Max. 1.00 340 nm Max. 0.10 350 nm Max. 0.01 375 nm Max. 0.005 400 nm Max. 0.005
packaging product number Unit size case size AA1111-065 1L 1L Amber Glass AA1111-002 1L 6x1L Amber Glass AA1111-048 4L 4L Amber Glass AA1111-001 4L 4x4L Amber Glass
acs ar0114
Meets reagent specifications for testing USP/NF monographs.
specifications Aldehyde (as HCHO) Max. 0.002 % Assay Min. 99.5 % Color (APHA) Max. 10 Isopropyl Alcohol Max. 0.05 % Methyl Alcohol Max. 0.05 % Residue after Evaporation Max. 0.001 % Solubility in Water Passes Test Substances Reducing Permanganate Passes Test Titrable Acid Max. 0.0003 meq/g Titrable Base Max. 0.0006 meq/g Water Max. 0.5 %
45packaging product number Unit size case size AR0114-065 1L 1L Amber Glass AR0114-002 1L 6x1L Amber Glass AR0114-008 204L 204L Metal Drum AR0114-007 20L 20L Metal Pail AR0114-073 4L 4L PVC Coated Amber Glass AR0114-048 4L 4L Amber Glass AR0114-006 4L 4x4L PVC Coated Amber Glass AR0114-001 4L 4x4L Amber Glass
acs plUs ar2501
Meets reagent specifications for testing USP/NF monographs.
specifications Aldehyde (as HCHO) Max. 0.002 % Assay Min. 99.5 % Color (APHA) Max. 10 Isopropyl Alcohol Max. 0.05 % Methyl Alcohol Max. 0.05 Residue after Evaporation Max. 0.001 % Solubility in Water Passes Test Substances Reducing Permanganate Passes Test Titrable Acid Max. 0.0003 meq/g Titrable Base Max. 0.0006 meq/g Water Max. 0.5 % Tracemetals Aluminum (Al) Max. 0.5 ppm Barium (Ba) Max. 0.1 ppm Boron (B) Max. 0.02 ppm Cadmium (Cd) Max. 0.05 ppm Calcium (Ca) Max. 0.5 ppm Chromium (Cr) Max. 0.02 ppm Cobalt (Co) Max. 0.02 ppm Copper (Cu) Max. 0.02 ppm Iron (Fe) Max. 0.1 ppm Lead (Pb) Max. 0.1 ppm Magnesium (Mg) Max. 0.1 ppm Manganese (Mn) Max. 0.02 ppm Nickel (Ni) Max. 0.02 ppm Tin (Sn) Max. 0.1 ppm Zinc (Zn) Max. 0.1 ppm
packaging product number Unit size case size AR2501-065 1L 1L Amber Glass AR2501-002 1L 6x1L Amber Glass AR2501-048 4L 4L Amber Glass AR2501-001 4L 4x4L Amber Glass
gc ag2800
For Organic Residue Analysis Packaged under Nitrogen.
specifications Assay Min. 99.9 % Color (APHA) Max. 10
GC-ECD Responsive Residue (as Heptachlor Epoxide) Max. 10 ppt GC-FID Responsive Residue (as 2-Octanol) Max. 5 ppb Residue after Evaporation Max. 1 ppm Water Max. 0.5 %
packaging product number Unit size case size AG2800-065 1L 1L Amber Glass AG2800-002 1L 6x1L Amber Glass AG2800-048 4L 4L Amber Glass AG2800-001 4L 4x4L Amber Glass
histological ar0109
For use in Tissue Sampling and Processing
specifications Assay Min. 99.5 % Color (APHA) Max. 10 Residue after Evaporation Max. 0.01 % Water Max. 0.5 %
packaging product number Unit size case size AR0109-008 204L 204L Metal Drum AR0109-007 20L 20L Metal Pail AR0109-066 4L 4L Poly Bottle AR0109-012 4L 4x4L Poly Bottle
hplc/acs as3300
For Use in Liquid Chromatography and Spectrophotometry Packaged under Nitrogen. Submicron filtered.
specifications Aldehyde (as HCHO) Max. 0.002 % Assay Min. 99.5 % Color (APHA) Max. 10 Isopropyl Alcohol Max. 0.05 % Methyl Alcohol Max. 0.05 % Residue after Evaporation Max. 0.001 % Solubility in Water Passes Test Substances Reducing Permanganate Passes Test Titrable Acid Max. 0.0003 meq/g Titrable Base Max. 0.0006 meq/g Water Max. 0.5 % Optical Absorbance at 330 nm Max. 1.00 340 nm Max. 0.10 350 nm Max. 0.02 375 nm Max. 0.01 400 nm Max. 0.01
packaging product number Unit size case size AS3300-008 204L 204L Metal Dru
Ace-
46ACETONECONTINUED)
hplc/spectro as1112
For Use in Liquid Chromatography and Spectrophotometry Packaged under Nitrogen. Submicron filtered. Also meets ACS specifications.
specifications Aldehyde (as HCHO) Max. 0.002 % Assay Min. 99.5 % Color (APHA) Max. 10 Isopropyl Alcohol Max. 0.05 % Methyl Alcohol Max. 0.05 % Residue after Evaporation Max. 5 ppm Solubility in Water Passes Test Substances Reducing Permanganate Passes Test Titrable Acid Max. 0.0003 meq/g Titrable Base Max. 0.0006 meq/g Water Max. 0.5 % Optical Absorbance at 330 nm Max. 1.00 340 nm Max. 0.10 350 nm Max. 0.01 375 nm Max. 0.005 400 nm Max. 0.005
packaging product number Unit size case size AS1112-065 1L 1L Amber Glass AS1112-002 1L 6x1L Amber Glass AS1112-073 4L 4L PVC Coated Amber Glass AS1112-048 4L 4L Amber Glass AS1112-006 4L 4x4L PVC Coated Amber Glass AS1112-001 4L 4x4L Amber Glass
nf aU1002
Meets NF Requirements
specifications Assay (excluding H
2O) Min. 99.0 %
Identification Passes Test Specific Gravity at 25ºC/25ºC Max. 0.789 Residue after Evaporation Max. 0.004 % Water Max. 0.5 %
packaging product number Unit size case size AU1002-048 4L 4L Amber Glass AU1002-001 4L 4x4L Amber Glass
ACETONITRIlE(METHYL CYANIDE)
CH3CN FW 41.05 CAS 75-05-8
MP -48°C BP 81-82°C D 0.786 Merck Index 13,71 FP 5°C NFPA 1-3-0 Storage Code: RED IMO Acetonitrile, 3, UN1648, PG II
physical properties Boiling Range (760mm) 81-82°C Density (g/ml) at 25°C 0.786 Dielectric Constant at 20°C 37.5 Elutropic Value (Silica) 0.5 Refractive Index (n20°/D) 1.344 Viscosity (cps) at 20°C 0.37
absolv aa1121
For Use in Liquid Chromatography, Spectrophotometry, and for Organic Residue Analysis Packaged under Nitrogen. Submicron filtered.
specifications Assay Min. 99.9 % Color (APHA) Max. 5 Fluorescence Background (as Quinine Sulfate) Max. 1 ppb GC-ECD Responsive Residue (as Heptachlor Epoxide) Max. 10 ppt GC-FID Responsive Residue (as 2-Octanol) Max. 5 ppb LC Gradient Elution Suitability Passes Test Residue after Evaporation Max. 1 ppm Water Max. 0.01 % Optical Absorbance at 190 nm Max. 1.00 195 nm Max. 0.14 200 nm Max. 0.05 210 nm Max. 0.04 220 nm Max. 0.02 230 nm Max. 0.01 254 nm Max. 0.005 400 nm Max. 0.005
packaging product number Unit size case size AA1121-065 1L 1L Amber Glass AA1121-002 1L 6x1L Amber Glass AA1121-048 4L 4L Amber Glass AA1121-001 4L 4x4L Amber Glass
acs ar0116
Meets reagent specifications for testing USP/NF monographs. Packaged under Nitrogen. Submicron filtered.
specifications Appearance Passes Test Assay Min. 99.5 % Color (APHA) Max. 10 Residue after Evaporation Max. 0.005 % Titrable Acid Max. 0.008 meq/g Titrable Base Max. 0.0006 meq/g Water Max. 0.3 %
packaging product number Unit size case size AR0116-065 1L 1L Amber Glass AR0116-002 1L 6x1L Amber Glass AR0116-008 204L 204L Metal Drum AR0116-007 20L 20L Metal Pail
47 AR0116-048 4L 4L Amber Glass AR0116-001 4L 4x4L Amber Glass
acs plUs ar2504
Meets reagent specifications for testing USP/NF monographs. Packaged under Nitrogen. Submicron filtered.
specifications Appearance Passes Test Assay Min. 99.5 % Color (APHA) Max. 10 Residue after Evaporation Max. 0.005 % Titrable Acid Max. 0.008 meq/g Titrable Base Max. 0.0006 meq/g Water Max. 0.3 % Tracemetals Aluminum (Al) Max. 0.5 ppm Barium (Ba) Max. 0.1 ppm Boron (B) Max. 0.02 ppm Cadmium (Cd) Max. 0.05 ppm Calcium (Ca) Max. 0.5 ppm Chromium (Cr) Max. 0.02 ppm Cobalt (Co) Max. 0.02 ppm Copper (Cu) Max. 0.02 ppm Iron (Fe) Max. 0.1 ppm Lead (Pb) Max. 0.1 ppm Magnesium (Mg) Max. 0.1 ppm Manganese (Mn) Max. 0.02 ppm Nickel (Ni) Max. 0.02 ppm Tin (Sn) Max. 0.1 ppm Zinc (Zn) Max. 0.1 ppm
packaging product number Unit size case size AR2504-065 1L 1L Amber Glass AR2504-002 1L 6x1L Amber Glass AR2504-048 4L 4L Amber Glass AR2504-001 4L 4x4L Amber Glass
anhydrosolv ah3801
Diluent for Oligonucleotide synthesis and other applications requiring extremely low water content Packaged under Nitrogen. Submicron filtered.
specifications Appearance (clear, colorless liquid) Passes Test Assay Min. 99.8 % Color (APHA) Max. 10 Residue after Evaporation Max. 5 ppm Water Max. 10 ppm
packaging product number Unit size case size AH3801-174 100ml 100ml Amber Glass with Septum Seal AH3801-100 100ml 6x100ml Amber Glass with Septum Seal AH3801-069 100ml 100ml Amber Glass AH3801-025 100ml 6x100ml Amber Glass AH3801-150 1L 6x1L Amber Glass with Septum Seal
AH3801-041 1L 1L Amber Glass with Septum Seal AH3801-059 2.5L 2.5L Amber Glass AH3801-014 2.5L 4x2.5L Amber Glass AH3801-054 450ml 450ml Amber Glass AH3801-032 450ml 6x450ml Amber Glass AH3801-136 4L 4x4L Amber Glass with Molecular Sieve AH3801-134 4L 4L Amber Glass with Molecular Sieve AH3801-048 4L 4L Amber Glass AH3801-001 4L 4x4L Amber Glass
bio ab1124
For Biotech Applications Packaged under Nitrogen. Submicron filtered.
specifications Assay Min. 99.9 % Color (APHA) Max. 10 LC Gradient Elution Suitability Passes Test Residue after Evaporation Max. 2 ppm Water Max. 10 ppm Optical Absorbance at 190 nm Max. 1.00 200 nm Max. 0.05 210 nm Max. 0.04 220 nm Max. 0.02 230 nm Max. 0.01 254 nm Max. 0.005 400 nm Max. 0.005
packaging product number Unit size case size AB1124-136 4L 4x4L Amber Glass with Molecular Sieve AB1124-134 4L 4L Amber Glass with Molecular Sieve AB1124-048 4L 4L Amber Glass AB1124-001 4L 4x4L Amber Glass
gc ag2802
For Organic Residue Analysis Packaged under Nitrogen. Submicron filtered.
specifications Assay Min. 99.7 % Color (APHA) Max. 10 GC-ECD Responsive Residue (as Heptachlor Epoxide) Max. 10 ppt GC-FID Responsive Residue (as 2-Octanol) Max. 5 ppb Residue after Evaporation Max. 5 ppm Water Max. 0.05 %
packaging product number Unit size case size AG2802-065 1L 1L Amber Glass AG2802-002 1L 6x1L Amber Glass AG2802-048 4L 4L Amber Glass AG2802-001 4L 4x4L Amber Glass
Ace-
48ACETONITRIlE (CONTINUED)
hplc/acs as1127
For use in Liquid Chromatography and Spectrophotometry (Non-Gradient) Packaged under Nitrogen. Submicron filtered.
specifications Appearance Passes Test Assay Min. 99.9 % Color (APHA) Max. 10 Residue after Evaporation Max. 5 ppm Titrable Acid Max. 0.008 meq/g Titrable Base Max. 0.0006 meq/g Water Max. 0.02 % Optical Absorbance at 190 nm Max. 1.00 200 nm Max. 0.10 220 nm Max. 0.05 230 nm Max. 0.015 400 nm Max. 0.01
packaging product number Unit size case size AS1127-008 204L 204L Metal Drum AS1127-048 4L 4L Amber Glass AS1127-001 4L 4x4L Amber Glass
hplc/spectro as1122
For Use in Liquid Chromatography and Spectrophotometry (Gradient) Packaged under Nitrogen. Submicron filtered. Also meets ACS specifications.
specifications Assay Min. 99.9 % Color (APHA) Max. 10 LC Gradient Elution Suitability Passes Test Residue after Evaporation Max. 2 ppm Titrable Acid Max. 0.008 meq/g Titrable Base Max. 0.0006 meq/g Water Max. 0.02 % Optical Absorbance at 190 nm Max. 1.00 200 nm Max. 0.05 210 nm Max. 0.04 220 nm Max. 0.02 230 nm Max. 0.01 254 nm Max. 0.005 400 nm Max. 0.005
packaging product number Unit size case size AS1122-065 1L 1L Amber Glass AS1122-002 1L 6x1L Amber Glass AS1122-073 4L 4L PVC Coated Amber Glass AS1122-048 4L 4L Amber Glass
AS1122-006 4L 4x4L PVC Coated Amber Glass
AS1122-001 4L 4x4L Amber Glass
hplc/spectro as1126
For Use in Liquid Chromatography and Spectrophotometry (Gradient) Packaged under Nitrogen. Submicron filtered. Also meets ACS specifications. Carbonyl-Free
specifications Assay Min. 99.9 % Carbonyl Compounds (as Acetone) Max. 25 ppb Color (APHA) Max. 10 LC Gradient Elution Suitability Passes Test Residue after Evaporation Max. 2 ppm Titrable Acid Max. 0.008 meq/g Titrable Base Max. 0.0006 meq/g Water Max. 0.02 % Optical Absorbance at 190 nm Max. 1.00 200 nm Max. 0.05 210 nm Max. 0.04 220 nm Max. 0.02 230 nm Max. 0.01 254 nm Max. 0.005 400 nm Max. 0.005
packaging product number Unit size case size AS1126-065 1L 1L Amber Glass AS1126-002 1L 6x1L Amber Glass AS1126-048 4L 4L Amber Glass AS1126-001 4L 4x4L Amber Glass
lc/Ms al1129
For LC/MS applications. Packaged under Nitrogen. Submicron filtered. Also meets ACS specifications.
specifications Assay Min. 99.9% Residue after Evaporation 0.8 ppm Water 0.01% LC Gradient Suitability at 254 and 210nm Passes Test Titratable acid, mEQ/g 0.008 Titratable base, mEQ/g 0.0006 LCMS Gradient Suitability Passes Test LCMS at Positive Mode as Reserpine 50 ppb LCMS at Negative Mode as Aldicarb 50 ppb Optical Absorbance at 190 nm Max. 1.00 195 nm Max. 0.15 200 nm Max. 0.05 205 nm Max. 0.04 210 nm Max. 0.03 215 nm Max. 0.025 220 nm Max. 0.015 225 nm Max. 0.015 230 nm Max. 0.01
49 254 nm Max. 0.005 280 nm Max. 0.005Tracemetals Aluminum (Al) Max. 25 ppb Barium (Ba) Max. 5 ppb Cadmium (Cd) Max. 5 ppb Calcium (Ca) Max. 25 ppb Chromium (Cr) Max. 5 ppb Cobalt (Co) Max. 5 ppb Copper (Cu) Max. 5 ppb Iron (Fe) Max. 5 ppb Lead (Pb) Max. 5 ppb Magnesium (Mg) Max. 10 ppb Manganese (Mn) Max. 5 ppb Nickel (Ni) Max. 5 ppb Potassium (K) Max. 10 ppb Silver (Ag) Max. 5 ppb Sodium (Na) Max. 50 ppb Tin (Sn) Max. 5 ppb Zinc (Zn) Max. 10 ppb
packaging product number Unit size case size AL1129-065 1L 1L Amber Glass AL1129-002 1L 6x1L Amber Glass AL1129-048 4L 4L Amber Glass AL1129-001 4L 4x4L Amber Glass
anhydrosolv ah3801
Diluent for Oligonucleotide synthesis and other applications requiring extremely low water content. Packaged under Nitrogen. Submicron filtered.
specifications Appearance (clear, colorless liquid) Passes Test Assay Min. 99.8 % Color (APHA) Max. 10 Residue after Evaporation Max. 5 ppm Water Max. 10 ppm
packaging product number Unit size case size AH3801-174 100ml 100ml Amber Glass with Septum Seal AH3801-100 100ml 6x100ml Amber Glass with Septum Seal AH3801-069 100ml 100ml Amber Glass AH3801-025 100ml 6x100ml Amber Glass AH3801-150 1L 6x1L Amber Glass with Septum Seal AH3801-041 1L 1L Amber Glass with Septum Seal AH3801-059 2.5L 2.5L Amber Glass AH3801-014 2.5L 4x2.5L Amber Glass AH3801-054 450ml 450ml Amber Glass AH3801-032 450ml 6x450ml Amber Glass AH3801-136 4L 4x4L Amber Glass with Molecular Sieve AH3801-134 4L 4L Amber Glass with Molecular Sieve
AH3801-048 4L 4L Amber Glass AH3801-001 4L 4x4L Amber Glass
bio ab1124
For Biotech Applications. Packaged under Nitrogen. Submicron filtered.
specifications Assay Min. 99.9 % Color (APHA) Max. 10 LC Gradient Elution Suitability Passes Test Residue after Evaporation Max. 2 ppm Water Max. 10 ppm Optical Absorbance at 190 nm Max. 1.00 200 nm Max. 0.05 210 nm Max. 0.04 220 nm Max. 0.02 230 nm Max. 0.01 254 nm Max. 0.005 400 nm Max. 0.005
packaging product number Unit size case size AB1124-136 4L 4x4L Amber Glass with Molecular Sieve AB1124-134 4L 4L Amber Glass with Molecular Sieve AB1124-048 4L 4L Amber Glass AB1124-001 4L 4x4L Amber Glass
ACETOPHENONE C
6H
5COCH
3 FW 120.15 CAS 98-86-2
MP 19-20°C BP 202°C D 1.030 Merck Index 13,74 FP 82°C NFPA1-2-0 Storage Code: RED
certified ar0117
specifications Assay Min. 98.0 % Residue after Evaporation Max. 0.01 %
packaging product number Unit size case size AR0117-053 500ml 500ml Amber Glass AR0117-013 500ml 6x500ml Amber Glass
Ace-
50ACETYlACETONE (2,4-PENTANEDIONE)
CH3COCH
2COCH
3 FW 100.12 CAS 123-54-6
MP -23°C BP 140.4°C D 0.975 Merck Index 13,83 FP 34°C NFPA 2-2-0 Storage Code: RED IMO Pentane-2, 4-dione, 3, UN2310, PG III
certified ar0118
specifications Acidity (as Acetic Acid) Max. 0.2 % Assay Min. 99.0 % Water Max. 0.2 %
packaging product number Unit size case size AR0118-065 1L 1L Amber Glass AR0118-002 1L 6x1L Amber Glass AR0118-048 4L 4L Amber Glass AR0118-001 4L 4x4L Amber Glass
ACETYlbENzENESee Acetophenone
ACETYl DIMETHYlAMINESee N,N-Dimethylacetamide
ACETYl OxIDESee Acetic Anhydride
ACETYlENE TETRAbROMIDESee 1,1,2,2-Tetrabromoethane
ACRYlIC ACID H
2C=CHCO
2H FW 72.06 CAS 79-10-7
MP 13°C BP 139°C D 1.051 Merck Index 13,132 FP 54°C NFPA 3-2-2 Storage Code: WHITE IMO Acrylic Acid, Stabilized, 8, UN2218, PG II
certified ar4002
specifications Assay Min. 99.0 % Color (APHA) Max. 10 Water Max. 0.2 %
packaging product number Unit size case size AR4002-065 1L 1L Amber Glass AR4002-002 1L 6x1L Amber Glass AR4002-048 4L 4L Amber Glass AR4002-001 4L 4x4L Amber Glass
ACTIvATOR SOlUTION (0.25M DCI IN ACETONITRIlE) NFPA 1-3-0 Storage Code: RED IMO Flammable Liquid N.O.S. (Acetonitrile), 3, UN1993, PG II
bio ab3963
For Oligonucleotide Synthesis
specifications Appearance (clear, colorless liquid) Passes Test Color (APHA) Max. 10 4,5-Dicyanoimidazole 0.24 - 0.26 M Water Max. 30 ppm Acetonitrile Component Purity Min. 99.9 % 4,5-Dicyanoimidazole Component Purity Min. 98.5 %
packaging product number Unit size case size AB3963-056 200ml 200ml Amber Glass AB3963-027 200ml 6x200ml Amber Glass AB3963-054 450ml 450ml Amber Glass AB3963-032 450ml 6x450ml Amber Glass
ACTIvATOR SOlUTION (0.25M ETT IN ACETONITRIlE) NFPA 1-3-0 Storage Code: RED IMO Flammable Liquid N.O.S. (Acetonitrile), 3, UN1993, PG II
bio ab3962
For Oligonucleotide Synthesis specifications Appearance (clear, colorless liquid) Passes Test Color (APHA) Max. 10 5-Ethylthio-1H-Tetrazole 0.24 - 0.26 M Water Max. 30 ppm Acetonitrile Component Purity Min. 99.9 % 5-Ethylthio-1H-Tetrazole Component Purity Min. 99.0 %
packaging product number Unit size case size AB3962-059 2.5L 2.5L Amber Glass AB3962-057 2.5L 2.5L GL-45 Amber Glass AB3962-055 2.5L 4x2.5L GL-45 Amber Glass AB3962-014 2.5L 4x2.5L Amber Glass AB3962-056 200ml 200ml Amber Glass AB3962-027 200ml 6x200ml Amber Glass AB3962-054 450ml 450ml Amber Glass AB3962-032 450ml 6x450ml Amber Glass AB3962-048 4L 4L Amber Glass AB3962-001 4L 4x4L Amber Glass
51ACTIvATOR SOlUTION (0.2M bMT IN ACETONITRIlE) NFPA 1-3-0 Storage Code: RED IMO Flammable Liquid N.O.S. (Acetonitrile), 3, UN1993, PG II
bio ab3964
For Oligonucleotide Synthesis
specifications Appearance (clear, colorless liquid) Passes Test Benzylthiotetrazole 0.19 - 0.21 M Color (APHA) Max. 10 Water Max. 30 ppm Acetonitrile Component Purity Min. 99.9 % Benzylthiotetrazole Component Purity Min. 99.5 %
packaging product number Unit size case size AB3964-056 200ml 200ml Amber Glass AB3964-027 200ml 6x200ml Amber Glass AB3964-054 450ml 450ml Amber Glass AB3964-032 450ml 6x450ml Amber Glass
ACTIvATOR SOlUTION (0.3M bMT IN ACETONITRIlE) NFPA 1-3-0 Storage Code: RED IMO Flammable Liquid N.O.S. (Acetonitrile), 3, UN1993, PG II
bio ab3961
For Oligonucleotide Synthesis
specifications Appearance (clear, colorless liquid) Passes Test Benzylthiotetrazole 0.285 - 0.315 M Color (APHA) Max. 10 Water Max. 30 ppm Acetonitrile Component Purity Min. 99.9 % Benzylthiotetrazole Component Purity Min. 99.5 %
packaging product number Unit size case size AB3961-056 200ml 200ml Amber Glass AB3961-027 200ml 6x200ml Amber Glass AB3961-054 450ml 450ml Amber Glass AB3961-032 450ml 6x450ml Amber Glass
ACTIvATOR SOlUTION (0.5M ETT IN ACETONITRIlE) NFPA 1-3-0
Storage Code: RED IMO Flammable Liquid N.O.S. (Acetonitrile), 3, UN1993, PG II
bio ab3959
For Oligonucleotide Synthesis
specifications Appearance (clear, colorless liquid) Passes Test Color (APHA) Max. 10 5-Ethylthio-1H-Tetrazole 0.48 - 0.52 M Water Max. 30 ppm Acetonitrile Component Purity Min. 99.9 % 5-Ethylthio-1H-Tetrazole Component Purity Min. 99.0 %
packaging product number Unit size case size AB3959-059 2.5L 2.5L Amber Glass AB3959-057 2.5L 2.5L GL-45 Amber Glass AB3959-055 2.5L 4x2.5L GL-45 Amber Glass AB3959-014 2.5L 4x2.5L Amber Glass AB3959-056 200ml 200ml Amber Glass AB3959-027 200ml 6x200ml Amber Glass AB3959-054 450ml 450ml Amber Glass AB3959-032 450ml 6x450ml Amber Glass AB3959-048 4L 4L Amber Glass AB3959-001 4L 4x4L Amber Glass
Ace-Act
52AlCOHOl, ANHYDROUS, REAGENT(SPECIALLY DENATURED ALCOHOL)
C2H
5OH FW 46.07 CAS 64-17-5
MP -130°C BP 78°C D 0.785 Merck Index 13,3795 FP 16°C NFPA 1-3-0 Storage Code: RED IMO Ethanol, 3, UN1170, PG II
physical properties Boiling Point (760mm) 78°C Density (g/ml) at 25°C 0.785 Refractive Index (n20°/D) 1.36 Viscosity (cps) at 20°C 1.2
acs ar0123
Meets reagent specifications for testing USP/NF monographs.
specifications Ethyl Alcohol and Methyl Alcohol 94.0 - 96.0 % Isopropyl Alcohol 4.0 - 6.0 % Color (APHA) Max. 10 Residue after Evaporation Max. 0.001 % Water Max. 0.5 %
packaging product number Unit size case size AR0123-065 1L 1L Amber Glass AR0123-002 1L 6x1L Amber Glass AR0123-008 204L 204L Metal Drum AR0123-007 20L 20L Metal Pail AR0123-073 4L 4L PVC Coated Amber Glass AR0123-048 4L 4L Amber Glass AR0123-006 4L 4x4L PVC Coated Amber Glass AR0123-001 4L 4x4L Amber Glass
acs plUs ar2507
Meets reagent specifications for testing USP/NF monographs.
specifications Ethyl Alcohol 89 - 91 % Isopropyl Alcohol 4 - 6 % Methyl Alcohol (by Volume) 4 - 6 % Color (APHA) Max. 10 Residue after Evaporation Max. 0.001 % Water Max. 0.2 % Tracemetals Aluminum (Al) Max. 0.5 ppm Barium (Ba) Max. 0.1 ppm Boron (B) Max. 0.02 ppm Cadmium (Cd) Max. 0.05 ppm Calcium (Ca) Max. 0.5 ppm Chromium (Cr) Max. 0.02 ppm Cobalt (Co) Max. 0.02 ppm Copper (Cu) Max. 0.02 ppm Iron (Fe) Max. 0.1 ppm Lead (Pb) Max. 0.1 ppm Magnesium (Mg) Max. 0.1 ppm
Manganese (Mn) Max. 0.02 ppm Nickel (Ni) Max. 0.02 ppm Tin (Sn) Max. 0.1 ppt Zinc (Zn) Max. 0.1 ppm
packaging product number Unit size case size AR2507-065 1L 1L Amber Glass AR2507-002 1L 6x1L Amber Glass AR2507-048 4L 4L Amber Glass AR2507-001 4L 4x4L Amber Glass
hplc/acs as3308
For Use in Liquid Chromatography and Spectrophotometry Packaged under Nitrogen. Submicron filtered.
specifications Ethyl Alcohol 91 - 89 Methyl Alcohol 6 - 4 Isopropyl Alcohol 6 - 4 Color (APHA) Max. 10 Residue after Evaporation Max. 4 ppm Water Max. 0.1 % Optical Absorbance at 205 nm Max. 1.00 210 nm Max. 0.65 220 nm Max. 0.35 230 nm Max. 0.20 250 nm Max. 0.04 270 nm Max. 0.01 300 nm Max. 0.005
packaging product number Unit size case size AS3308-008 204L 204L Metal Drum
hplc/spectro as1131
For Use in Liquid Chromatography and Spectrophotometry Packaged under Nitrogen. Submicron filtered. Also meets ACS specifications.
specifications Ethyl Alcohol 89 - 91 % Isopropyl Alcohol 4 - 6 % Methyl Alcohol 4 - 6 % Color (APHA) Max. 10 Residue after Evaporation Max. 4 ppm Water Max. 0.10 % Optical Absorbance at 205 nm Max. 1.00 210 nm Max. 0.65 220 nm Max. 0.35 230 nm Max. 0.20 250 nm Max. 0.04 270 nm Max. 0.01 300 nm Max. 0.005
packaging product number Unit size case size AS1131-065 1L 1L Amber Glass AS1131-002 1L 6x1L Amber Glass AS1131-048 4L 4L Amber Glass AS1131-001 4L 4x4L Amber Glass
53AlCOHOl, REAGENT (SPECIALLY DENATURED ALCOHOL)
C2H
5OH FW 46.07 CAS 64-17-5
MP -130°C BP 78°C D 0.785 Merck Index 13,3795 FP 16°C NFPA 1-3-0 Storage Code: RED IMO Ethanol, 3, UN1170, PG II
physical properties Boiling Point (760mm) 78°C Density (g/ml) at 25°C 0.785 Refractive Index (n20°/D) 1.36 Viscosity (cps) at 20°C 1.2
certified ar2508
specifications Ethyl Alcohol (w/w %) 82.0 - 86.0 Methyl Alcohol (w/w %) 3.5 - 5.5 Isopropyl Alcohol (w/w %) 4.0 - 6.0 Color (APHA) Max. 20 Water (Karl Fisher) 7.0 - 8.0 %
packaging product number Unit size case size AR2508-031 20L 20L Poly Pail AR2508-066 4L 4L Poly Bottle AR2508-012 4L 4x4L Poly Bottle
AMINObENzENESee Aniline
2-AMINOETHANOlSee Ethanolamine
AMMONIA SOlUTIONSee Ammonium Hydroxide
AMMONIA WATERSee Ammonium Hydroxide
AMMONIUM ACETATE CH
3CO
2NH
4 FW 77.08 CAS 631-61-8
Merck Index 13,495 NFPA 2-0-0 Storage Code: GREEN
hplc as0139
For Use in High Performance Liquid Chromatography
specifications Assay Min. 97.0 % Chloride (Cl) Max. 5 ppm Heavy Metals (as Pb) Max. 5 ppm Insoluble Matter Max. 0.005 % Iron (Fe) Max. 5 ppm Nitrate Max. 0.001 %
pH of a 5% Solution at 25ºC 6.7 - 7.3 Residue after Ignition Max. 0.01 % Sulfate Max. 0.001 % Optical Absorbance of a 1M solution at 254 nm Max. 0.02 280 nm Max. 0.01 350 nm Max. 0.01
packaging product number Unit size case size AS0139-022 1Kg 1Kg Amber Glass AS0139-004 1Kg 6x1Kg Amber Glass AS0139-028 500g 500g Amber Glass AS0139-017 500g 6x500g Amber Glass
AMMONIUM CARbONATE (NH
4)
2CO
3 FW 96.09 CAS 506-87-6
Merck Index 13,528 NFPA 0-0-0 Storage Code: GREEN
hplc as4007
For Use in High Performance Liquid Chromatography Also meets ACS specifications.
specifications Assay (Ammonia) Min. 30.0 % Chloride (Cl) Max. 5 ppm Heavy Metals (as Pb) Max. 5 ppm Insoluble Matter Max. 0.005 % Iron (Fe) Max. 5 ppm Nonvolatile Matter Max. 0.005 % Sulfur Compounds (as Sulfate) Max. 0.002 % Optical Absorbance of a 1M solution at 254 nm Max. 0.02 280 nm Max. 0.01 350 nm Max. 0.01
packaging product number Unit size case size AS4007-022 1Kg 1Kg Amber Glass AS4007-004 1Kg 6x1Kg Amber Glass AS4007-028 500g 500g Amber Glass AS4007-017 500g 6x500g Amber Glass
Alc-Amm
54AMMONIUM HYDROxIDE NH
4OH FW 35.05 CAS 1336-21-6
D 0.900 Merck Index 13,513 NFPA 3-0-0 Storage Code: WHITE IMO Ammonia Solution, 8, UN2672, PG III
acs ar0147
specifications Appearance Passes Test Assay 28.0 - 30.0 % Carbon Dioxide Max. 0.002 % Chloride (Cl) Max. 0.5 ppm Heavy Metals (as Pb) Max. 0.5 ppm Iron (Fe) Max. 0.2 ppm Nitrate Max. 2 ppm Phosphate Max. 2 ppm Residue after Ignition Max. 0.002 % Substances Reducing Permanganate Passes Test Total Sulfur (as Sulfate) Max. 2 ppm
packaging product number Unit size case size AR0147-058 2.5L 2.5L Flint Glass AR0147-011 2.5L 4x2.5L Flint Glass AR0147-071 500ml 500ml Flint Glass AR0147-068 500ml 6x500ml Flint Glass
traceMetal ae4017
Packaged under Nitrogen. Concentration of some elements may change over time due to storage in glass container.
specifications Assay (by Titration) 20 - 22 % Color (APHA) Max. 10 Chloride (Cl) Max. 0.5 ppm Phosphate (PO4) Max. 0.5 ppm Sulfate (SO4) Max. 1 ppm Aluminum (Al) Max. 1 ppb Antimony (Sb) Max. 1 ppb Arsenic (As) Max. 1 ppb Barium (Ba) Max. 1 ppb Beryllium (Be) Max. 1 ppb Bismuth (Bi) Max. 1 ppb Cadmium (Cd) Max. 1 ppb Calcium (Ca) Max. 1 ppb Cerium (Ce) Max. 0.5 ppb Cesium (Cs) Max. 0.5 ppb Chromium (Cr) Max. 1 ppb Cobalt (Co) Max. 1 ppb Copper (Cu) Max. 1 ppb Dysprosium (Dy) Max. 0.5 ppb Erbium (Er) Max. 0.5 ppb Europium (Eu) Max. 0.5 ppb Gadolinium (Gd) Max. 0.5 ppb Gallium (Ga) Max. 0.5 ppb Germanium (Ge) Max. 0.5 ppb
Gold (Au) Max. 0.5 ppb Hafnium (Hf ) Report Only Holmium (Ho) Max. 0.5 ppb Indium (In) Max. 0.5 ppb Iron (Fe) Max. 1 ppb Lanthanum (La) Max. 0.5 ppb Lead (Pb) Max. 1 ppb Lithium (Li) Max. 1 ppb Lutetium (Lu) Max. 0.5 ppb Magnesium (Mg) Max. 1 ppb Manganese (Mn) Max. 1 ppb Mercury (Hg) Max. 1 ppb Molybdenum (Mo) Max. 1 ppb Neodymium (Nd) Max. 0.5 ppb Nickel (Ni) Max. 1 ppb Niobium (Nb) Max. 0.5 ppb
packaging product number Unit size case size AE4017-070 500ml 500ml Poly Bottle AE4017-020 500ml 6x500ml Poly Bottle
traceMetal plUs ae4016
specifications Assay (by Titration) 20 - 22 % Aluminum (Al) Max. 20 ppt Antimony (Sb) Max. 10 ppt Arsenic (As) Max. 10 ppt Barium (Ba) Max. 10 ppt Beryllium (Be) Max. 10 ppt Bismuth (Bi) Max. 10 ppt Cadmium (Cd) Max. 10 ppt Calcium (Ca) Max. 20 ppt Cerium (Ce) Max. 10 ppt Cesium (Cs) Max. 10 ppt Chromium (Cr) Max. 10 ppt Cobalt (Co) Max. 10 ppt Copper (Cu) Max. 20 ppt Dysprosium (Dy) Max. 10 ppt Erbium (Er) Max. 10 ppt Europium (Eu) Max. 10 ppt Gadolinium (Gd) Max. 10 ppt Gallium (Ga) Max. 10 ppt Germanium (Ge) Max. 10 ppt Gold (Au) Max. 10 ppt Hafnium (Hf ) Report Only Holmium (Ho) Max. 10 ppt Indium (In) Max. 10 ppt Iron (Fe) Max. 20 ppt Lanthanum (La) Max. 10 ppt Lead (Pb) Max. 10 ppt Lithium (Li) Max. 10 ppt Lutetium (Lu) Max. 10 ppt Magnesium (Mg) Max. 20 ppt Manganese (Mn) Max. 10 ppt Molybdenum (Mo) Max. 10 ppt Neodymium (Nd) Max. 10 ppt Nickel (Ni) Max. 10 ppt Niobium (Nb) Max. 10 ppt
55 Palladium (Pd) Report Only Platinum (Pt) Report Only Potassium (K) Max. 20 ppt Praseodymium (Pr) Max. 10 ppt Rhenium (Re) Report Only Rhodium (Rh) Max. 10 ppt Rubidium (Rb) Max. 10 ppt Ruthenium (Ru) Report Only Samarium (Sm) Max. 10 ppt Scandium (Sc) Max. 10 ppt Selenium (Se) Report Only Silver (Ag) Max. 10 ppt Sodium (Na) Max. 20 ppt Strontium (Sr) Max. 10 ppt Tellurium (Te) Max. 10 ppt Terbium (Tb) Max. 10 ppt Thallium (Tl) Max. 10 ppt Thorium (Th) Max. 10 ppt Thulium (Tm) Max. 10 ppt Tin (Sn) Max. 10 ppt Titanium (Ti) Max. 10 ppt Tungsten (W) Max. 10 ppt Uranium (U) Max. 10 ppt Vanadium (V) Max. 10 ppt Ytterbium (Yb) Max. 10 ppt Yttrium (Y) Max. 10 ppt Zinc (Zn) Max. 10 ppt Zirconium (Zr) Max. 10 ppt
packaging product number Unit size case size AE4016-064 1L 1L Poly Bottle AE4016-062 250ml 250ml Poly Bottle
AMMONIUM PHOSPHATE MONObASIC (AMMONIUM DIHYDROGEN PHOSPHATE)
(NH4)H
2PO
4 FW 115.03 CAS 7722-76-1
Merck Index 13,547 NFPA 0-0-0 Storage Code: GREEN
hplc as4031
For Use in High Performance Liquid Chromatography
specifications Assay Min. 98.0 % Calcium (Ca) Max. 0.001 % Chloride (Cl) Max. 5 ppm Heavy Metals (as Pb) Max. 5 ppm Insoluble Matter Max. 0.005 % Iron (Fe) Max. 0.001 % Ammonium Hydroxide Precipitate Max. 0.0005 % Nitrate Max. 0.001 % pH of a 5% Solution at 25ºC 3.8 - 4.4 Potassium (K) Max. 0.005 % Sodium (Na) Max. 0.005 % Sulfur Compounds (as Sulfate) Max. 0.01 % Optical Absorbance of a 1M solution at
254 nm Max. 0.03 280 nm Max. 0.02 350 nm Max. 0.01
packaging product number Unit size case size AS4031-022 1Kg 1Kg Amber Glass AS4031-004 1Kg 6x1Kg Amber Glass AS4031-028 500g 500g Amber Glass AS4031-017 500g 6x500g Amber Glass
AMYl ACETATE CH
3CO
2C
5H
11 FW 130.19 CAS 628-63-7
BP 142-152°C D 0.876 FP 36°C NFPA 1-3-0 Storage Code: RED IMO Amyl Acetates, 3, UN1104, PG III
certified ar0160
(Mixture of Isomers)
specifications Assay Min. 99.0 % Water Max. 0.2 %
packaging product number Unit size case size AR0160-065 1L 1L Amber Glass AR0160-002 1L 6x1L Amber Glass AR0160-048 4L 4L Amber Glass AR0160-001 4L 4x4L Amber Glass
iso-AMYl ACETATESee Isoamyl Acetate
iso-AMYl AlCOHOlSee Isoamyl Acetate
Amm-Amy
56n-AMYl AlCOHOl(1-PENTANOL)
CH3(CH
2)
4OH FW 88.15 CAS 71-41-0
MP -78°C BP 136-138°C D 0.811 Merck Index 13,7195 FP 48°C NFPA 1-3-0 Storage Code: RED IMO Pentanols, 3, UN1105, PG III
acs ar0162
Meets reagent specifications for testing USP/NF monographs.
specifications Acids and Esters Max. 0.075 meq/g Assay Min. 98.0 % Carbonyl Compounds (as Formaldehyde) Max. 0.1 % Color (APHA) Max. 30 Residue after Evaporation Max. 0.003 % Water Max. 0.5 %
packaging product number Unit size case size AR0162-065 1L 1L Amber Glass AR0162-002 1L 6x1L Amber Glass AR0162-048 4L 4L Amber Glass AR0162-001 4L 4x4L Amber Glass
tert-AMYl AlCOHOl (2-METHYL-2-BUTANOL)
C2H
5C(CH
3)
2OH FW 88.15 CAS 75-85-4
MP -12°C BP 102°C D 0.805 Merck Index 13,7218 FP 21°C NFPA 1-3-0 Storage Code: RED IMO Pentanols, 3, UN1105, PG II
certified ar0164
specifications Assay Min. 99.0 % Residue after Evaporation Max. 0.004 % Water Max. 0.5 %
packaging product number Unit size case size AR0164-065 1L 1L Amber Glass AR0164-002 1L 6x1L Amber Glass AR0164-048 4L 4L Amber Glass AR0164-001 4L 4x4L Amber Glass
ANIlINE C
6C
5NH
2 FW 93.13 CAS 62-53-3
MP -6°C BP 184°C D 1.022 Merck Index 13,661 FP 70°C NFPA 3-2-0 Storage Code: BLUE IMO Aniline, 6.1, UN1547, PG II
acs ar0170
Meets reagent specifications for testing USP/NF monographs.
specifications Assay Min. 99.0 % Chlorobenzene Max. 0.01 % Color (APHA) Max. 250 Hydrocarbons Passes Test Nitrobenzene Passes Test Residue after Ignition Max. 0.005 %
packaging product number Unit size case size AR0170-065 1L 1L Amber Glass AR0170-002 1L 6x1L Amber Glass AR0170-048 4L 4L Amber Glass AR0170-001 4L 4x4L Amber Glass
1-bENzAzINESee Quinoline
bENzENE o-DICHlOROSee o-Dichlorobenzene
bENzENE CHlOROSee Chlorobenzene
bENzENEMETHANOlSee Benzene Alcohol
bENzINE, PETROlEUMSee Petroleum Ether
bENzYl AlCOHOl C
6H
5CH
2OH FW 108.14 CAS 100-51-6
MP -15°C BP 205°C D 1.045 Merck Index 13,1126 FP 93°C NFPA 2-1-0 Storage Code: BLUE
acs br0228
specifications Assay Min. 99.0 % Acetophenone Max. 0.01 % Benzaldehyde Max. 0.02 % Color (APHA) Max. 20 Residue after Ignition Max. 0.005 %
packaging product number Unit size case size BR0228-065 1L 1L Amber Glass BR0228-002 1L 6x1L Amber Glass BR0228-048 4L 4L Amber Glass BR0228-001 4L 4x4L Amber Glass
57certified br4046
specifications Assay Min. 99.0 % Benzaldehyde Max. 0.2 % Color (APHA) Max. 20 Residue after Ignition Max. 0.005 %
packaging product number Unit size case size BR4046-065 1L 1L Amber Glass BR4046-002 1L 6x1L Amber Glass BR4046-048 4L 4L Amber Glass BR4046-001 4L 4x4L Amber Glass
bROMOCHlOROMETHANE BrCH
2Cl FW 129.39 CAS 74-97-5
MP -88°C BP 68°C D 1.991 NFPA 2-0-0 Storage Code: BLUE IMO Bromochloromethane, 6.1, UN1887, PG III
certified br0246
Light-Sensitive
specifications Assay Min. 99.0 %
packaging product number Unit size case size BR0246-065 1L 1L Amber Glass BR0246-002 1L 6x1L Amber Glass BR0246-048 4L 4L Amber Glass BR0246-001 4L 4x4L Amber Glass
1,4-bUTANEDIOl HO(CH
2)
4OH FW 90.12 CAS 110-63-4
MP 16°C BP 230°C D 1.017 FP 110°C NFPA 1-1-0 Storage Code: GREEN
certified br0270
specifications Assay Min. 99.0 % Color (APHA) Max. 10 Water Max. 0.1 %
packaging product number Unit size case size BR0270-065 1L 1L Amber Glass BR0270-002 1L 6x1L Amber Glass BR0270-048 4L 4L Amber Glass BR0270-001 4L 4x4L Amber Glass
1-bUTANESUlFONIC ACID, SODIUM SAlT(SODIUM 1-BUTANESULFONATE)
CH3(CH
2)
3SO
3Na FW 160.166 CAS 2386-54-1
NFPA 1-1-0 Storage Code: GREEN IMO Butanesulfonic Acid, Sodium Salt, 1-
hplc bs3395
For Ion-Pair Chromatography of Basic Compounds
specifications Assay (by Acidimetry) Min. 98.0 % Optical Absorbance of 0.25M Solution at 220 nm Max. 0.20 230 nm Max. 0.05 240 nm Max. 0.05 250 nm Max. 0.04 260 nm Max. 0.04
packaging product number Unit size case size BS3395-019 100g 100g Amber Glass BS3395-009 25g 25g Amber Glass
1-bUTANOlSee n-Butyl Alcohol
2-bUTANOlSee sec-Butyl Alcohol
iso-bUTANOlSee Isobutyl Alcohol
sec-bUTANOlSee sec-Butyl Alcohol
tert-bUTANOlSee tert-Butyl Alcohol
2-bUTANONESee Methyl Ethyl Ketone
2-bUTOxYETHANOlSee Ethylene Glycol Monobutyl Ether
2-(2-bUTOxYETHOxY)ETHANOlSee Diethylene Glycol Monobutyl Ether
2-(2-bUTOxYETHOxY)ETHYlACETATESee Diethylene Glycol Monobutyl Ether Acetate
Amy-But
582-bUTOxYETHYl ACETATESee Ethylene Glycol Monobutyl Ether Acetate
n-bUTYl ACETATE CH
3CO
2(CH
2)
3CH
3 FW 116.16 CAS 123-86-4
MP -78°C BP 124-126°C D 0.882 Merck Index 13,1534 FP 24°C NFPA 1-3-0 Storage Code: RED IMO Butyl Acetates, 3, UN1123, PG III
physical properties Boiling Range (760mm) 124-126°C Density (g/ml) at 25°C 0.882 Dielectric Constant at 20°C 5.01 Refractive Index (n20°/D) 1.394 Viscosity (cps) at 20°C 0.732 0.732 acs br0284
Meets reagent specifications for testing USP/NF monographs.
specifications Assay Min. 99.5 % n-Butyl alcohol Max. 0.2 % Color (APHA) Max. 10 Residue after Evaporation Max. 0.001 % Substances Darkened by Sulfuric Acid Passes Test Titrable Acid Max. 0.0016 meq/g Water Max. 0.1 %
packaging product number Unit size case size BR0284-065 1L 1L Amber Glass BR0284-002 1L 6x1L Amber Glass BR0284-048 4L 4L Amber Glass BR0284-001 4L 4x4L Amber Glass
acs plUs br2510
Meets reagent specifications for testing USP/NF monographs.
specifications Assay Min. 99.5 % n-Butyl alcohol Max. 0.2 % Color (APHA) Max. 10 Residue after Evaporation Max. 0.001 % Substances Darkened by Sulfuric Acid Passes Test Titrable Acid Max. 0.0016 meg/g Water Max. 0.1 % Tracemetals Aluminum (Al) Max. 0.5 ppm Barium (Ba) Max. 0.1 ppm Boron (B) Max. 0.02 ppm Cadmium (Cd) Max. 0.05 ppm Calcium (Ca) Max. 0.5 ppm Chromium (Cr) Max. 0.02 ppm Cobalt (Co) Max. 0.02 ppm Copper (Cu) Max. 0.02 ppm Iron (Fe) Max. 0.1 ppm Lead (Pb) Max. 0.1 ppm
Magnesium (Mg) Max. 0.1 ppm Manganese (Mn) Max. 0.02 ppm Nickel (Ni) Max. 0.02 ppm Tin (Sn) Max. 0.1 ppm Zinc (Zn) Max. 0.1 ppm
packaging product number Unit size case size BR2510-065 1L 1L Amber Glass BR2510-002 1L 6x1L Amber Glass BR2510-048 4L 4L Amber Glass BR2510-001 4L 4x4L Amber Glass
hplc/spectro bs1221
For Use in Liquid Chromatography and Spectrophotometry Packaged under Nitrogen. Submicron filtered.
specifications Assay Min. 99.0 % Color (APHA) Max. 10 Residue after Evaporation Max. 5 ppm Water Max. 0.05 % Optical Absorbance at 254 nm Max. 1.00 256 nm Max. 0.40 259 nm Max. 0.20 275 nm Max. 0.04 300 nm Max. 0.02 320 nm Max. 0.01 400 nm Max. 0.01
packaging product number Unit size case size BS1221-065 1L 1L Amber Glass BS1221-002 1L 6x1L Amber Glass BS1221-048 4L 4L Amber Glass BS1221-001 4L 4x4L Amber Glass
iso-bUTYl ACETATESee Isobutyl Acetate
1-bUTYl AlCOHOlSee n-Butyl Alcohol
2-bUTYl AlCOHOlSee sec-Butyl Alcohol
Iso-bUTYl AlCOHOlSee Isobutyl Alcohol
n-bUTYl AlCOHOl(1-BUTANOL) CH
3(CH
2)
3OH FW 74.12 CAS 71-36-3
MP -90°C BP 117.7°C D 0.810 Merck Index 13,1539 FP 35°C NFPA 1-3-0 Storage Code: RED IMO Butanols, 3, UN1120, PG III
59 physical properties Boiling Point (760mm) 117.7°C Density (g/ml) at 25°C 0.81 Dielectric Constant at 25°C 17.51 Refractive Index (n20°/D) 1.399 Viscosity (cps) at 20°C 2.98 acs br0292
Meets reagent specifications for testing USP/NF monographs.
specifications Assay Min. 99.4 % Butyl Ether Max. 0.2 % Carbonyl Compounds (as Butaraldehyde) Max. 0.01 % Color (APHA) Max. 10 Residue after Evaporation Max. 0.005 % Titrable Acid Max. 0.0008 meq/g Water Max. 0.1 %
packaging product number Unit size case size BR0292-065 1L 1L Amber Glass BR0292-002 1L 6x1L Amber Glass BR0292-007 20L 20L Metal Pail BR0292-048 4L 4L Amber Glass BR0292-001 4L 4x4L Amber Glass
acs plUs br2514
Meets reagent specifications for testing USP/NF monographs.
specifications Butyl Ether Max. 0.2 % Carbonyl Compounds (as Butyraldehyde) Max. 0.01 % Assay Min. 99.4 % Residue after Evaporation Max. 0.01 % Water Max. 0.1 % Color (APHA) Max. 10 Titrable Acid 0.0008 meq/g Tracemetals Aluminum (Al) Max. 0.5 ppm Barium (Ba) Max. 0.1 ppm Boron (B) Max. 0.02 ppm Cadmium (Cd) Max. 0.05 ppm Calcium (Ca) Max. 0.5 ppm Chromium (Cr) Max. 0.02 ppm Cobalt (Co) Max. 0.02 ppm Copper (Cu) Max. 0.02 ppm Iron (Fe) Max. 0.1 ppm Lead (Pb) Max. 0.1 ppm Magnesium (Mg) Max. 0.1 ppm Manganese (Mn) Max. 0.02 ppm Nickel (Ni) Max. 0.02 ppm Tin (Sn) Max. 0.1 ppm Zinc (Zn) Max. 0.1 ppm
packaging product number Unit size case size BR2514-065 1L 1L Amber Glass BR2514-002 1L 6x1L Amber Glass BR2514-048 4L 4L Amber Glass BR2514-001 4L 4x4L Amber Glass
gc bg1242
For Organic Residue Analysis Packaged under Nitrogen.
specifications Assay Min. 99.5 % Residue after Evaporation Max. 5 ppm Water Max. 0.1 % Color (APHA) Max. 10 GC-ECD Halogenated Residue (as Heptachlor Epoxide) Max. 20 ppt GC-FID Responsive Residue (as 2-Octanol) Max. 5 ppb
packaging product number Unit size case size BG1242-048 4L 4L Amber Glass BG1242-001 4L 4x4L Amber Glass
hplc/spectro bs1241
For Use in Liquid Chromatography and Spectrophotometry Packaged under Nitrogen. Submicron filtered.
specifications Assay Min. 99.8 % Color (APHA) Max. 10 Residue after Evaporation Max. 5 ppm Water Max. 0.05 % Optical Absorbance at 215 nm Max. 1.00 220 nm Max. 0.50 240 nm Max. 0.10 260 nm Max. 0.04 280 nm Max. 0.02 300 nm Max. 0.01
packaging product number Unit size case size BS1241-065 1L 1L Amber Glass BS1241-002 1L 6x1L Amber Glass BS1241-048 4L 4L Amber Glass BS1241-001 4L 4x4L Amber Glass
But-
60n-bUTYl AlCOHOl(1-BUTANOL)(CONTINUED)
nf bU0229
Meets NF Requirements
specifications Specific Gravity @ 25°C 0.807 - 0.809 Distilling Range Within 1.5°C, including 117.7°C Acidity Passes Test Water Max. 0.1 % Limit of Nonvolatile Residue Max. 0.004 % Aldehydes Passes Test Butyl Ether Max. 0.2 %
packaging product number Unit size case size BU0229-048 4L 4L Amber Glass BU0229-001 4L 4x4L Amber Glass
sec-bUTYl AlCOHOl(2-BUTANOL)
C2H
5CH(OH)CH
3 FW 74.12 CAS 78-92-2
MP -115°C BP 98°C D 0.808 Merck Index 13,1540 FP 26°C NFPA 1-3-0 Storage Code: RED IMO Butanols, 3, UN1120, PG III
certified br0293
specifications Assay Min. 99.0 % Color (APHA) Max. 10 Water Max. 0.2 %
packaging product number Unit size case size BR0293-065 1L 1L Amber Glass BR0293-002 1L 6x1L Amber Glass BR0293-048 4L 4L Amber Glass BR0293-001 4L 4x4L Amber Glass
tert-bUTYl AlCOHOl(2-METHYL-2-PROPANOL)
(CH3)
3COH FW 74.12 CAS 75-65-0
MP 25-26°C BP 83°C D 0.775 Merck Index 13,1541 FP 11°C NFPA 1-3-0 Storage Code: RED IMO Butanols, 3, UN1120, PG III
physical properties Boiling Point (760mm) 83°C Density (g/ml) at 25°C 0.775 Refractive Index (n20°/D) 1.387
acs br0294
Meets reagent specifications for testing USP/NF monographs.
specifications Assay Min. 99.0 % Carbonyl Compounds (as Formaldehyde) Max. 0.01 % Color (APHA) Max. 20 Residue after Evaporation Max. 0.003 % Titrable Acid Max. 0.001 meq/g Water Max. 0.1 %
packaging product number Unit size case size BR0294-064 1L 1L Poly Bottle BR0294-015 1L 6x1L Poly Bottle BR0294-066 4L 4L Poly Bottle BR0294-012 4L 4x4L Poly Bottle
acs plUs br2517
Meets reagent specifications for testing USP/NF monographs.
specifications Carbonyl Compounds (as Formaldehyde) Max. 0.01 % Assay Min. 99.0 % Residue after Evaporation Max. 0.003 % Water Max. 0.1 % Color (APHA) Max. 20 Titrable Acid 0.001 meq/g Tracemetals Aluminum (Al) Max. 0.5 ppm Barium (Ba) Max. 0.1 ppm Boron (B) Max. 0.02 ppm Cadmium (Cd) Max. 0.05 ppm Calcium (Ca) Max. 0.5 ppm Chromium (Cr) Max. 0.02 ppm Cobalt (Co) Max. 0.02 ppm Copper (Cu) Max. 0.02 ppm Iron (Fe) Max. 0.1 ppm Lead (Pb) Max. 0.1 ppm Magnesium (Mg) Max. 0.1 ppm Manganese (Mn) Max. 0.02 ppm Nickel (Ni) Max. 0.02 ppm Tin (Sn) Max. 0.1 ppm Zinc (Zn) Max. 0.1 ppm
packaging product number Unit size case size BR2517-064 1L 1L Poly Bottle BR2517-015 1L 6x1L Poly Bottle BR2517-066 4L 4L Poly Bottle BR2517-012 4L 4x4L Poly Bottle
61 hplc/spectro bs4047
For Use in Liquid Chromatography and Spectrophotometry Packaged under Nitrogen. Submicron filtered.
specifications Assay Min. 99.5 % Color (APHA) Max. 10 Residue after Evaporation Max. 5 ppm Water Max. 0.05 % Optical Absorbance at 215 nm Max. 1.00 230 nm Max. 0.50 250 nm Max. 0.20 300 nm Max. 0.01 350 nm Max. 0.01
packaging product number Unit size case size BS4047-064 1L 1L Poly Bottle BS4047-015 1L 6x1L Poly Bottle BS4047-066 4L 4L Poly Bottle BS4047-012 4L 4x4L Poly Bottle
bUTYl CARbITOlSee Diethylene Glycol Monobutyl Ether
bUTYl CARbITOl ACETATESee Diethylene Glycol Monobutyl Ether Acetate
bUTYl CEllOSOlvESee Ethylene Glycol Monobutyl Ether
bUTYl CEllOSOlvE ACETATESee Ethylene Glycol Monobutyl Ether Acetate
n-bUTYl CHlORIDESee 1-Chlorobutane
bUTYl ETHER(DIBUTYL ETHER) [CH
3(CH
2)
3]
2O FW 130.23 CAS 142-96-1
MP -98°C BP 142-143°C D 0.764 Merck Index 13,1568 FP 25°C NFPA 2-3-1 Storage Code: RED IMO Dibutyl Ethers, 3, UN1149, PG III
anhydrosolv bh3815
Packaged under Nitrogen in Septum Sealed Bottle
specifications Assay Min. 99.3 % Residue after Evaporation Max. 5 ppm Water Max. 50 ppm
packaging product number Unit size case size BH3815-174 100ml 100ml Amber Glass with Septum Seal BH3815-100 100ml 6x100ml Amber Glass with Septum Seal BH3815-150 1L 6x1L Amber Glass with Septum Seal BH3815-041 1L 1L Amber Glass with Septum Seal
certified br0298
specifications Assay Min. 99.0 % Water Max. 0.05 % Peroxides (as Hydrogen Peroxide, at time of packaging) Max. 50 ppm
packaging product number Unit size case size BR0298-065 1L 1L Amber Glass BR0298-002 1L 6x1L Amber Glass BR0298-048 4L 4L Amber Glass BR0298-001 4L 4x4L Amber Glass
tert-bUTYl METHYl ETHERSee Methyl tert-Butyl Ether
Iso-bUTYl METHYl KETONESee Methyl Isobutyl Ketone
bUTYl PHOSPHATESee Tributyl Phosphate
bUTYl PHTHAlATESee Dibutyl Phthalate
n-bUTYlAMINE CH
3(CH
2)
3NH
2 FW 73.14 CAS 109-73-9
MP -49°C BP 78°C D 0.740 Merck Index 13,1542 FP -14°C NFPA 3-3-0 Storage Code: RED IMO Butalymine, 3 (8), UN1125, PG II
certified br0295
specifications Assay Min. 99.0 % Water Max. 2 %
packaging product number Unit size case size BR0295-065 1L 1L Amber Glass BR0295-002 1L 6x1L Amber Glass BR0295-048 4L 4L Amber Glass BR0295-001 4L 4x4L Amber Glass
But-
62bUTYRAlDEHYDE CH
3CH
2CH
2CHO FW 72.11 CAS 123-72-8
MP -96°C BP 75°C D 0.800 Merck Index 13,1591 FP -11°C NFPA 3-3-0 Storage Code: RED Marine Pollutant IMO Butyraldehyde, 3, UN1129, PG II
certified br0299
specifications Assay Min. 99.0 %
packaging product number Unit size case size BR0299-065 1L 1L Amber Glass BR0299-002 1L 6x1L Amber Glass BR0299-048 4L 4L Amber Glass BR0299-001 4L 4x4L Amber Glass
CAP A (1-METHYlIMIDAzOlE IN ACETONITRIlE, 1:9) NFPA 3-3-1 Storage Code: RED IMO Flammable Liquid, Corrosive, N.O.S. (Acetonitrile, 1-Methylimidazole), 3 (8), UN2924, PG II
bio cb3974
For Oligonucleotide Synthesis
specifications Appearance (clear, colorless liquid) Passes Test 1-Methylimidazole (by Volume) 9.8 - 10.2 % Acetonitrile (by Volume) 89.0 - 91.0 % Color (APHA) Max. 10 Water Max. 150 ppm Acetonitrile Component Purity Min. 99.9 % 1-Methylimidazole Component Purity Min. 99.0 %
packaging product number Unit size case size CB3974-059 2.5L 2.5L Amber Glass CB3974-014 2.5L 4x2.5L Amber Glass CB3974-056 200ml 200ml Amber Glass CB3974-027 200ml 6x200ml Amber Glass CB3974-054 450ml 450ml Amber Glass CB3974-032 450ml 6x450ml Amber Glass CB3974-048 4L 4L Amber Glass CB3974-001 4L 4x4L Amber Glass
CAP A (1-METHYlIMIDAzOlE IN ACETONITRIlE, 2:8) NFPA 3-3-1 Storage Code: RED IMO Flammable Liquid, Corrosive, N.O.S. (Acetonitrile, 1-Methylimidazole), 3 (8), UN2924, PG II
bio cb3976
For Oligonucleotide Synthesis
specifications Appearance (clear, colorless liquid) Passes Test 1-Methylimidazole (by Volume) 19.0 - 21.0 % Acetonitrile (by Volume) 79.0 - 81.0 % Color (APHA) Max. 10 Water Max. 150 ppm Acetonitrile Component Purity Min. 99.9 % 1-Methylimidazole Component Purity Min. 99.0 %
packaging product number Unit size case size CB3976-057 2.5L 2.5L GL-45 Amber Glass CB3976-055 2.5L 4x2.5L GL-45 Amber Glass
CAP A (ACETIC ANHYDRIDE IN THF, 1:9) NFPA 2-3-1 Storage Code: RED IMO Flammable Liquid, Corrosive, N.O.S. (Tetrahydrofuran, Acetic Anhydride), 3 (8), UN2924, PG II
bio cb3965
For Oligonucleotide Synthesis (Expedite formulation)
specifications Appearance (clear, colorless liquid) Passes Test Acetic Anhydride (by Volume) 9.0 - 11.0 % Tetrahydrofuran (by Volume) 89.0 - 91.0 % Color (APHA) Max. 10 IR spectra (conforms to structure) Passes Test Water Max. 150 ppm Acetic Anhydride Component Purity Min. 99.5 % Tetrahydrofuran Component Purity Min. 99.9 %
packaging product number Unit size case size CB3965-059 2.5L 2.5L Amber Glass CB3965-014 2.5L 4x2.5L Amber Glass CB3965-056 200ml 200ml Amber Glass CB3965-027 200ml 6x200ml Amber Glass CB3965-054 450ml 450ml Amber Glass CB3965-032 450ml 6x450ml Amber Glass CB3965-048 4L 4L Amber Glass CB3965-001 4L 4x4L Amber Glass
CAP A (ACETIC ANHYDRIDE, 2,6-lUTIDINE IN THF, 1:1:8) NFPA 2-3-1 Storage Code: RED IMO Flammable Liquid, Corrosive, N.O.S. (Tetrahydrofuran, Acetic Anhydride, 1-Methylimidazole), 3 (8), UN2924, PG II
63bio cb3970
For Oligonucleotide Synthesis
specifications Appearance (clear, colorless liquid) Passes Test Acetic Anhydride (by Volume) 9.0 - 11.0 % 2,6-Lutidine (by Volume) 9.0 - 11.0 % Tetrahydrofuran (by Volume) 79.0 - 81.0 % Color (APHA) Max. 10 Water Max. 150 ppm Acetic Anhydride Component Purity Min. 99.5 % 2,6-Lutidine Component Purity Min. 99.0 % Tetrahydrofuran Component Purity Min. 99.9 %
packaging product number Unit size case size CB3970-059 2.5L 2.5L Amber Glass CB3970-014 2.5L 4x2.5L Amber Glass CB3970-056 200ml 200ml Amber Glass CB3970-027 200ml 6x200ml Amber Glass CB3970-054 450ml 450ml Amber Glass CB3970-032 450ml 6x450ml Amber Glass CB3970-048 4L 4L Amber Glass CB3970-001 4L 4x4L Amber Glass
CAP A (ACETIC ANHYDRIDE, PYRIDINE IN THF, 1:1:8) NFPA 2-3-1
Storage Code: RED IMO Flammable Liquid, Corrosive, N.O.S. (Acetic Anhydride, Pyridine), 3 (8), UN2924, PG II
bio cb3975
For Oligonucleotide Synthesis (ABI formulation)
specifications Appearance (clear, colorless liquid) Passes Test Acetic Anhydride (by Volume) 9 - 11 % Pyridine (by Volume) 9 - 11 % Tetrahydrofuran (by Volume) 79 - 81 % Color (APHA) Max. 10 Water Max. 150 ppm Acetic Anhydride Component Purity Min. 99.5 % Pyridine Component Purity Min. 99.8 % Tetrahydrofuran Component Purity Min. 99.9 %
packaging product number Unit size case size CB3975-059 2.5L 2.5L Amber Glass CB3975-014 2.5L 4x2.5L Amber Glass CB3975-056 200ml 200ml Amber Glass CB3975-027 200ml 6x200ml Amber Glass CB3975-054 450ml 450ml Amber Glass CB3975-032 450ml 6x450ml Amber Glass CB3975-048 4L 4L Amber Glass CB3975-001 4L 4x4L Amber Glass
CAP b (1-METHYlIMIDAzOlE IN THF, 1:9) NFPA 2-3-1
Storage Code: RED IMO Flammable Liquid, Corrosive, N.O.S. (Tetrahydrofuran, 1-Methylimidazole), 3 (8), UN2924, PG II
bio cb3980
For Oligonucleotide Synthesis (ABI formulation)
specifications Appearance (clear, colorless liquid) Passes Test 1-Methylimidazole (by Volume) 9.5 - 10.5 % Tetrahydrofuran (by Volume) 89.0 - 91.0 % Color (APHA) Max. 10 Water Max. 150 ppm 1-Methylimidazole Component Purity Min. 99.0 % Tetrahydrofuran Component Purity Min. 99.9 %
packaging product number Unit size case size CB3980-059 2.5L 2.5L Amber Glass CB3980-014 2.5L 4x2.5L Amber Glass CB3980-056 200ml 200ml Amber Glass CB3980-027 200ml 6x200ml Amber Glass CB3980-054 450ml 450ml Amber Glass CB3980-032 450ml 6x450ml Amber Glass CB3980-048 4L 4L Amber Glass CB3980-001 4L 4x4L Amber Glass
CAP b (1-METHYlIMIDAzOlE IN THF, 16:84) NFPA 2-3-1 Storage Code: RED IMO Flammable Liquid, Corrosive, N.O.S. (Tetrahydrofuran, 1-Methylimidazole), 3 (8), UN2924, PG II
bio cb3979
For Oligonucleotide Synthesis
specifications Appearance (clear, colorless liquid) Passes Test 1-Methylimidazole (by Volume) 15.0 - 17.0 % Tetrahydrofuran (by Volume) 83.0 - 85.0 % Color (APHA) Max. 10 Water Max. 150 ppm 1-Methylimidazole Component Purity Min. 99.0 % Tetrahydrofuran Component Purity Min. 99.9 %
packaging product number Unit size case size CB3979-059 2.5L 2.5L Amber Glass CB3979-014 2.5L 4x2.5L Amber Glass CB3979-056 200ml 200ml Amber Glass CB3979-027 200ml 6x200ml Amber Glass CB3979-054 450ml 450ml Amber Glass CB3979-032 450ml 6x450ml Amber Glass CB3979-048 4L 4L Amber Glass CB3979-001 4L 4x4L Amber Glass
But-Cap
64CAP b (1-METHYlIMIDAzOlE, PYRIDINE IN THF, 1:1:8) NFPA 3-3-1 Storage Code: RED IMO Flammable Liquid, Corrosive, N.O.S. (Tetrahydrofuran, N-Methylimidazole), 3 (8), UN2924, PG II
bio cb3985
For Oligonucleotide Synthesis (Expedite formulation)
specifications Appearance (clear, colorless liquid) Passes Test 1-Methylimidazole (by Volume) 9.0 - 11.0 % Pyridine (by Volume) 9.0 - 11.0 % Tetrahydrofuran (by Volume) 79.0 - 81.0 % Color (APHA) Max. 10 Water Max. 150 ppm 1-Methylimidazole Component Purity Min. 99.0 % Pyridine Component Purity Min. 99.8 % Tetrahydrofuran Component Purity Min. 99.9 %
packaging product number Unit size case size CB3985-059 2.5L 2.5L Amber Glass CB3985-014 2.5L 4x2.5L Amber Glass CB3985-056 200ml 200ml Amber Glass CB3985-027 200ml 6x200ml Amber Glass CB3985-054 450ml 450ml Amber Glass CB3985-032 450ml 6x450ml Amber Glass CB3985-048 4L 4L Amber Glass CB3985-001 4L 4x4L Amber Glass
CAP b (ACETIC ANHYDRIDE IN ACETONITRIlE, 1:9) NFPA 2-3-1 Storage Code: RED IIMO Flammable Liquid, Corrosive, N.O.S. (Acetic Anhydride, Acetonitrile), 3 (8), UN2924, PG II
bio cb3984
For Oligonucleotide Synthesis
specifications Appearance (clear, colorless liquid) Passes Test Acetic Anhydride (by Volume) 9.0 - 11.0 % Acetonitrile (by Volume) 89.0 - 91.0 % Color (APHA) Max. 10 Water Max. 150 ppm Acetic Anhydride Component Purity Min. 99.5 % Acetonitrile Component Purity Min. 99.9 %
packaging product number Unit size case size CB3984-059 2.5L 2.5L Amber Glass CB3984-014 2.5L 4x2.5L Amber Glass CB3984-056 200ml 200ml Amber Glass CB3984-027 200ml 6x200ml Amber Glass CB3984-054 450ml 450ml Amber Glass
CB3984-032 450ml 6x450ml Amber Glass CB3984-048 4L 4L Amber Glass CB3984-001 4L 4x4L Amber Glass
CAP b 1 (ACETIC ANHYDRIDE IN ACETONITRIlE, 4:6) NFPA 2-3-1 Storage Code: RED IMO Flammable Liquid, Corrosive, N.O.S. (Acetic Anhydride, Acetonitrile), 3 (8), UN2924, PG II
bio cb3982
For Oligonucleotide Synthesis (Amersham formulation)
specifications Appearance (clear, colorless liquid) Passes Test Acetic Anhydride (by Volume) 39.0 - 41.0 % Acetonitrile (by Volume) 59.0 - 61.0 % Color (APHA) Max. 10 Water Max. 150 ppm Acetic Anhydride Component Purity Min. 99.5 % Acetonitrile Component Purity Min. 99.9 %
packaging product number Unit size case size CB3982-057 2.5L 2.5L GL-45 Amber Glass CB3982-055 2.5L 4x2.5L GL-45 Amber Glass
CAP b 2 (2,6-lUTIDINE IN ACETONITRIlE, 6:4) NFPA 2-3-0 Storage Code: RED IMO Flammable Liquid, N.O.S. (2,6-Lutidine, Acetonitrile), 3, UN1993, PG II
bio cb3983
For Oligonucleotide Synthesis (Amersham formulation)
specifications Appearance (clear, colorless liquid) Passes Test 2,6-Lutidine (by Volume) 59.0 - 61.0 % Acetonitrile (by Volume) 39.0 - 41.0 % Color (APHA) Max. 10 Water Max. 150 ppm 2,6-Lutidine Component Purity Min. 99.0 % Acetonitrile Component Purity Min. 99.9 %
packaging product number Unit size case size CB3983-057 2.5L 2.5L GL-45 Amber Glass CB3983-055 2.5L 4x2.5L GL-45 Amber Glass
65CAPRYl AlCOHOlSee 2-Octanol
n-CAPRYlIC AlCOHOlSee 1-Octanol
CARbITOlSee Diethylene Glycol Monoethyl Ether
CARbITOl ACETATESee Diethylene Glycol Monoethyl Ether Acetate
CARbOlIC ACIDSee Phenol
CARbON DISUlFIDE CS
2 FW 76.13 CAS 75-15-0
MP -112°C BP 46°C D 1.266 Merck Index 13,1821 FP -33°C NFPA 3-3-0 Storage Code: RED IMO Carbon Disulphide, 3 (6.1), UN1131, PG I
physical properties Boiling Point (760mm) 46°C Density (g/ml) at 25°C 1.266 Refractive Index (n20°/D) 1.627 Viscosity (cps) at 20°C 0.37
absolv ca1300
Suitable for Industrial Hygiene Analysis Packaged under Nitrogen. Also meets ACS specifications.
specifications Assay Min. 99.9 % Color (APHA) Max. 10 Hydrogen Sulfide Max. 1.5 ppm Residue after Evaporation Max. 3 ppm Sulfur Dioxide Max. 2.5 ppm Trace Organic Impurity (as Benzene) Max. 200 ppb Water Max. 0.05 % Optical Absorbance at 382 nm Max. 1.00 388 nm Max. 0.50 403 nm Max. 0.10 410 nm Max. 0.05 500 nm Max. 0.01
packaging product number Unit size case size CA1300-053 500ml 500ml Amber Glass CA1300-013 500ml 6x500ml Amber Glass
acs cr0335
Meets reagent specifications for testing USP/NF monographs.
specifications Assay Min. 99.9 % Color (APHA) Max. 10 Hydrogen Sulfide Passes Test Residue after Evaporation Max. 0.002 % Sulfur Dioxide Passes Test Water Max. 0.05 %
packaging product number Unit size case size CR0335-065 1L 1L Amber Glass CR0335-002 1L 6x1L Amber Glass
low benzene cr0336
For Hydrocarbon Analysis and for Spectrophotometry Suitable for Use with NIOSH Analytical Methods 1003, 1500 &1501 Also meets ACS Specifications.
specifications Assay Min. 99.9 % Color (APHA) Max. 10 Hydrogen Sulfide Max. 1.5 ppm Residue after Evaporation Max. 0.002 % Sulfur Dioxide Max. 2.5 ppm Trace Organic Impurity (as Benzene) Max. 1 ppm Water Max. 0.05 % Optical Absorbance at 382 nm Max. 1.00 388 nm Max. 0.50 403 nm Max. 0.10 410 nm Max. 0.05 500 nm Max. 0.01
packaging product number Unit size case size CR0336-053 500ml 500ml Amber Glass CR0336-013 500ml 6x500ml Amber Glass
spectro cs1301
For Spectrophotometry Packaged under Nitrogen.
specifications Assay Min. 99.9 % Color (APHA) Max. 10 Residue after Evaporation Max. 0.002 % Water Max. 0.05 % Optical Absorbance at 382 nm Max. 1.00 388 nm Max. 0.50 403 nm Max. 0.10 410 nm Max. 0.05 500 nm Max. 0.01
packaging product number Unit size case size CS1301-065 1L 1L Amber Glass CS1301-002 1L 6x1L Amber Glass
Cap-Car
66CElITE 545 CAS 61790-53-2 NFPA 2-0-0 Storage Code: GREEN IMO Celite 545
pUrified cr0338
Suitable for use in Pesticide Residue Analysis after Extraction with Petroleum Ether
packaging product number Unit size case size CR0338-061 2.5Kg 2.5Kg Poly Bottle CR0338-028 500g 500g Amber Glass CR0338-017 500g 6x500g Amber Glass
CEllOSOlvESee Ethylene Glycol Monoethyl Ether
CEllOSOlvE ACETATESee Ethylene Glycol Monoethyl Ether Acetate
CHlORObENzENE (MONOCHLOROBENZENE)
C6H
5Cl FW 112.56 CAS 108-90-7
MP -45°C BP 132°C D 1.107 Merck Index 13,2139 FP 23°C NFPA 2-3-0 Storage Code: RED IMO Chlorobenzene, 3, UN1134, PG III
physical properties Boiling Point (760mm) 132°C Density (g/ml) at 25°C 1.107 Dielectric Constant at 25°C 5.62 Refractive Index (n20°/D) 1.524 Viscosity (cps) at 20°C 0.8
acs cr0353
Meets reagent specifications for testing USP/NF monographs.
specifications Assay Min. 99.5 % Color (APHA) Max. 30 Residue after Evaporation Max. 0.02 % Titrable Acid Max. 0.004 meq/g
packaging product number Unit size case size CR0353-065 1L 1L Amber Glass CR0353-002 1L 6x1L Amber Glass CR0353-007 20L 20L Metal Pail CR0353-048 4L 4L Amber Glass CR0353-001 4L 4x4L Amber Glass
hplc/spectro cs1311
For Use in Liquid Chromatography and Spectrophotometry Packaged under Nitrogen. Submicron filtered.
specifications Assay Min. 99.9 % Residue after Evaporation Max. 3 ppm Water Max. 0.03 % Optical Absorbance at 288 nm Max. 1.00 300 nm Max. 0.06 325 nm Max. 0.04 350 nm Max. 0.02 400 nm Max. 0.01
packaging product number Unit size case size CS1311-065 1L 1L Amber Glass CS1311-002 1L 6x1L Amber Glass CS1311-048 4L 4L Amber Glass CS1311-001 4L 4x4L Amber Glass
1-CHlORObUTANE(n-BUTYL CHLORIDE) CH
3(CH
2)
3Cl FW 92.57 CAS 109-69-3
MP -123°C BP 77-78°C D 0.886 Merck Index 13,1559 FP -6°C NFPA 2-3-0 Storage Code: RED IMO Chlorobutanes, 3, UN1127, PG II
physical properties Boiling Range (760mm) 77-78°C Density (g/ml) at 25°C 0.886 Dielectric Constant at 20°C 7.39 Refractive Index (n20°/D) 1.4024 Viscosity (cps) at 20°C 0.35 0.35
certified cr0355
specifications Assay Min. 99.0 % Color (APHA) Max. 10 Residue after Evaporation Max. 0.005 % Water Max. 0.05 %
packaging product number Unit size case size CR0355-065 1L 1L Amber Glass CR0355-002 1L 6x1L Amber Glass CR0355-048 4L 4L Amber Glass CR0355-001 4L 4x4L Amber Glass
hplc/spectro cs1321
For Use in Liquid Chromatography and Spectrophotometry Packaged under Nitrogen. Submicron filtered.
specifications Assay Min. 99.5 % Color (APHA) Max. 10
67 Residue after Evaporation Max. 5 ppm Water Max. 0.02 % Optical Absorbance at 220 nm Max. 1.00 225 nm Max. 0.33 235 nm Max. 0.07 254 nm Max. 0.01
packaging product number Unit size case size CS1321-065 1L 1L Amber Glass CS1321-002 1L 6x1L Amber Glass CS1321-048 4L 4L Amber Glass CS1321-001 4L 4x4L Amber Glass
1-CHlORO-2, 3-EPOxYPROPANESee Epichlorohydrin
2-CHlOROETHANOl (ETHYLENE CHLOROHYDRIN)
ClCH2CH
2OH FW 80.51 CAS 107-07-3
MP -89°C BP 129°C D 1.201 Merck Index 13,3827 FP 60°C NFPA 4-2-0 Storage Code: BLUE IMO Ethylene Chlorohydrin, 6.1, UN1135, PG I
certified cr0357
specifications Assay
packaging product number Unit size case size CR0357-065 1L 1L Amber Glass CR0357-002 1L 6x1L Amber Glass
CHlOROFORM (AMYlENE STAbIlIzED) CHCl
3 FW 119.38 CAS 67-66-3
MP -63°C BP 60.5-61.5°C D 1.492 Merck Index 13,2160 NFPA 4-2-0 Storage Code: BLUE Cancer Suspect Agent IMO Chloroform, 6.1, UN1888, PG III
physical properties Boiling Range (760mm) 60.5-61.5°C Density (g/ml) at 25°C 1.492 Dielectric Constant at 20°C 4.81 Elutropic Value (Silica) 0.31 Refractive Index (n20°/D) 1.446 Viscosity (cps) at 20°C 0.57
absolv ca1331
For Use in Liquid Chromatography, Spectrophotometry, and for Organic Residue Analysis
Packaged under Nitrogen. (Stabilized with 100-150 ppm Amylene w/w)
specifications Assay Min. 99.9 % Color (APHA) Max. 10 GC-ECD Responsive Residue (as Heptachlor Epoxide) Max. 10 ppt GC-FID Responsive Residue (as 2-Octanol) Max. 5 ppb Fluorescence Background (as Quinine Sulfate) Max. 1 ppb Residue after Evaporation Max. 1 ppm Stabilizer (Amylenes, w/w) 50 - 200 ppm Water Max. 0.02 % Optical Absorbance at 245 nm Max. 1.00 255 nm Max. 0.15 260 nm Max. 0.05 270 nm Max. 0.02 90 nm Max. 0.01 400 nm Max. 0.01
packaging product number Unit size case size CA1331-065 1L 1L Amber Glass CA1331-002 1L 6x1L Amber Glass CA1331-048 4L 4L Amber Glass CA1331-001 4L 4x4L Amber Glass
acs cr0360
Meets reagent specifications for testing USP/NF monographs. (Stabilized with 75-200 ppm Amylene w/w)
specifications Acetone and Aldehyde Passes Test Acid and Chloride Passes Test Assay Min. 99.8 % Color (APHA) Max. 10 Free Chlorine (as Cl) Passes Test Lead (Pb) Max. 0.05 ppm Residue after Evaporation Max. 0.001 % Stabilizer (Amylenes, w/w) 50 - 200 ppm Water Max. 0.03 %
packaging product number Unit size case size CR0360-065 1L 1L Amber Glass CR0360-002 1L 6x1L Amber Glass CR0360-008 204L 204L Metal Drum CR0360-007 20L 20L Metal Pail CR0360-073 4L 4L PVC Coated Amber Glass CR0360-048 4L 4L Amber Glass CR0360-006 4L 4x4L PVC Coated Amber Glass CR0360-001 4L 4x4L Amber Glass
Cel-Chl
68CHlOROFORM (AMYlENE STAbIlIzED)(CONTINUED)
acs plUs cr2521
Meets reagent specifications for testing USP/NF monographs. (Stabilized with 75-200 ppm Amylene)
specifications Acetone and Aldehyde Passes Test Acid And Chloride Passes Test Assay Min. 99.8 % Residue after Evaporation Max. 0.001 % Water Max. 0.03 % Color (APHA) Max. 10 Free Chlorine Passes Test Suitability for use in Dithizone Test Passes Test Lead (Pb) Max. 0.05 ppm Tracemetals Aluminum (Al) Max. 0.5 ppm Barium (Ba) Max. 0.1 ppm Boron (B) Max. 0.02 ppm Cadmium (Cd) Max. 0.05 ppm Calcium (Ca) Max. 0.5 ppm Chromium (Cr) Max. 0.02 ppm Cobalt (Co) Max. 0.02 ppm Copper (Cu) Max. 0.02 ppm Iron (Fe) Max. 0.1 ppm Magnesium (Mg) Max. 0.1 ppm Manganese (Mn) Max. 0.02 ppm Nickel (Ni) Max. 0.02 ppm Tin (Sn) Max. 0.1 ppm Zinc (Zn) Max. 0.1 ppm
packaging product number Unit size case size CR2521-065 1L 1L Amber Glass CR2521-002 1L 6x1L Amber Glass CR2521-048 4L 4L Amber Glass CR2521-001 4L 4x4L Amber Glass
anhydrosolv ch3827
Packaged under Nitrogen in Septum Sealed Bottle (Stabilized with 50-200 ppm Amylene w/w)
specifications Acidity (as HCl) Max. 1 mg/L Appearance (clear, colorless liquid) Passes Test Assay Min. 99.0 % Chloride Max. 10 mg/L Color (APHA) Max. 10 Residue after Evaporation Max. 3 ppm Stabilizer (Amylenes, w/w) 100 - 150 ppm Water Max. 10 ppm
packaging product number Unit size case size CH3827-174 100ml 100ml Amber Glass with Septum Seal
CH3827-100 100ml 6x100ml Amber Glass with Septum Seal CH3827-150 1L 6x1L Amber Glass with Septum Seal CH3827-041 1L 1L Amber Glass with Septum Seal
gc cg2804
For Organic Residue Analysis Packaged under Nitrogen. (Stabilized with 50-200 ppm Amylene w/w)
specifications Assay (excluding Amylene) Min. 99.9 % Residue after Evaporation Max. 1 ppm Water Max. 0.02 % Color (APHA) Max. 10 GC-ECD Halogenated Residue (as Heptachlor Epoxide) Max. 5 ppt GC-FID Responsive Residue (as 2-Octanol) Max. 5 ppb Free Chlorine (as Cl) Max. 10 mg/L
packaging product number Unit size case size CG2804-048 4L 4L Amber Glass CG2804-001 4L 4x4L Amber Glass
hplc/acs cs3315
For Use in Liquid Chromatography and Spectrophotometry Packaged under Nitrogen. Submicron filtered. (Stabilized with 50-200 ppm Amylene w/w)
specifications Acetone and Aldehyde Passes Test Acid and Chloride Passes Test Assay Min. 99.9 % Color (APHA) Max. 10 Free Chlorine (as Cl) Passes Test Lead (Pb) Max. 0.05 ppm Residue after Evaporation Max. 5 ppm Stabilizer (Amylenes, w/w) 100 - 150 ppm Suitability for use in Dithizone Tests Passes Test Water Max. 0.03 % Optical Absorbance at 245 nm Max. 1.00 255 nm Max. 0.15 260 nm Max. 0.05 270 nm Max. 0.02 290 nm Max. 0.01 400 nm Max. 0.01
packaging product number Unit size case size CS3315-008 204L 204L Metal Drum
69hplc/spectro cs1332
For Use in Liquid Chromatography and Spectrophotometry Packaged under Nitrogen. Submicron filtered. Also meets ACS specifications. (Stabilized with 50-200 ppm Amylene w/w)
specifications Acetone and Aldehyde Passes Test Acid and Chloride Passes Test Assay Min. 99.9 % Color (APHA) Max. 10 Free Chlorine (as Cl) Passes Test Lead (Pb) Max. 0.05 ppm Residue after Evaporation Max. 3 ppm Stabilizer (Amylenes, w/w) 50 - 200 ppm Suitability for use in Dithizone Tests Passes Test Water Max. 0.02 % Optical Absorbance at 245 nm Max. 1.00 255 nm Max. 0.15 260 nm Max. 0.05 270 nm Max. 0.02 290 nm Max. 0.01 400 nm Max. 0.01
packaging product number Unit size case size CS1332-065 1L 1L Amber Glass CS1332-002 1L 6x1L Amber Glass CS1332-073 4L 4L PVC Coated Amber Glass CS1332-048 4L 4L Amber Glass CS1332-006 4L 4x4L PVC Coated Amber Glass CS1332-001 4L 4x4L Amber Glass
CHlOROFORM (ETHANOl STAbIlIzED) CHCl
3 FW 119.38 CAS 67-66-3
MP -63°C BP 60.5-61.5°C D 1.492 Merck Index 13,2160 NFPA 4-2-0 Storage Code: BLUE Cancer Suspect Agent IMO Chloroform, 6.1, UN1888, PG III
physical properties Boiling Range (760mm) 60.5-61.5°C Density (g/ml) at 25°C 1.492 Dielectric Constant at 20°C 4.81 Elutropic Value (Silica) 0.31 Refractive Index (n20°/D) 1.446 Viscosity (cps) at 20°C 0.57
absolv ca1330
For Use in Liquid Chromatography, Spectrophotometry, and for Organic Residue Analysis (Stabilized with 0.5-1.0% Ethanol v/v)
specifications Assay (excluding Ethanol) Min. 99.8 % Chloride (Cl) Max. 0.001 %
Color (APHA) Max. 10 GC-ECD Responsive Residue (as Heptachlor Epoxide) Max. 10 ppt GC-FID Responsive Residue (as 2-Octanol) Max. 10 ppb Residue after Evaporation Max. 5 ppm Stabilizer (Ethanol, v/v %) 0.5 - 1.0 Water Max. 0.03 % Optical Absorbance at 245 nm Max. 1.00 255 nm Max. 0.15 260 nm Max. 0.05 270 nm Max. 0.02 290 nm Max. 0.01 400 nm Max. 0.01
packaging product number Unit size case size CA1330-065 1L 1L Amber Glass CA1330-002 1L 6x1L Amber Glass CA1330-048 4L 4L Amber Glass CA1330-001 4L 4x4L Amber Glass
acs cr0359
Meets reagent specifications for testing USP/NF monographs. (Stabilized with 0.5-1.0% Ethanol v/v)
specifications Acetone and Aldehyde Passes Test Acid and Chloride Passes Test Assay (excluding Ethanol) Min. 99.8 % Color (APHA) Max. 10 Free Chlorine (as Cl) Passes Test Lead (Pb) Max. 0.05 ppm Residue after Evaporation Max. 0.001 % Stabilizer (Ethanol, v/v %) 0.5 - 1.0 Substances Darkened by Sulfuric Acid Passes Test Water Max. 0.03 %
packaging product number Unit size case size CR0359-065 1L 1L Amber Glass CR0359-002 1L 6x1L Amber Glass CR0359-008 204L 204L Metal Drum CR0359-007 20L 20L Metal Pail CR0359-073 4L 4L PVC Coated Amber Glass CR0359-048 4L 4L Amber Glass CR0359-006 4L 4x4L PVC Coated Amber Glass CR0359-001 4L 4x4L Amber Glass
Chl-
70CHlOROFORM (ETHANOl STAbIlIzED) (CONTINUED)
acs plUs cr2523
Meets reagent specifications for testing USP/NF monographs. (Stabilized with 0.5-1.0% Ethanol v/v)
specifications Acetone and Aldehyde Passes Test Acid and Chloride Passes Test Assay (excluding Ethanol) Min. 99.9 % Color (APHA) Max. 10 Free Chlorine (as Cl) Passes Test Lead (Pb) Max. 0.05 ppm Residue after Evaporation Max. 0.001 % Stabilizer (Ethanol, v/v %) 0.5 - 1.0 Substances Darkened by Sulfuric Acid Passes Test Suitability for use in Dithizone Tests Passes Test Water Max. 0.03 % Aluminum (Al) Max. 0.5 ppm Barium (Ba) Max. 0.1 ppm Boron (B) Max. 0.02 ppm Cadmium (Cd) Max. 0.05 ppm Calcium (Ca) Max. 0.5 ppm Chromium (Cr) Max. 0.02 ppm Cobalt (Co) Max. 0.02 ppm Copper (Cu) Max. 0.02 ppm Iron (Fe) Max. 0.1 ppm Magnesium (Mg) Max. 0.1 ppm Manganese (Mn) Max. 0.02 ppm Nickel (Ni) Max. 0.02 ppm Tin (Sn) Max. 0.1 ppm Zinc (Zn) Max. 0.1 ppm
packaging product number Unit size case size CR2523-065 1L 1L Amber Glass CR2523-002 1L 6x1L Amber Glass CR2523-048 4L 4L Amber Glass CR2523-001 4L 4x4L Amber Glass
anhydrosolv ch3830
Packaged under Nitrogen in Septum Sealed Bottle (Stabilized with 0.5-1.0% Ethanol v/v)
specifications Assay (excluding Ethanol) Min. 99.0 % Residue after Evaporation Max. 3 ppm Stabilizer (Ethanol, v/v %) 0.5 - 1.0 Water Max. 10 ppm
packaging product number Unit size case size CH3830-174 100ml 100ml Amber Glass with Septum Seal CH3830-100 100ml 6x100ml Amber Glass with Septum Seal
CH3830-150 1L 6x1L Amber Glass with Septum Seal CH3830-041 1L 1L Amber Glass with Septum Seal
gc cg2805
For Organic Residue Analysis. Packaged under Nitrogen. (Stabilized with 0.5-1.0% Ethanol v/v)
specifications Assay (excluding Ethanol) Min. 99.9 % Chloride (Cl) Max. 0.001 % Color (APHA) Max. 10 GC-ECD Responsive Residue (as Heptachlor Epoxide) Max. 10 ppt GC-FID Responsive Residue (as 2-Octanol) Max. 5 ppb Residue after Evaporation Max. 1 ppm Water Max. 0.02 %
packaging product number Unit size case size CG2805-048 4L 4L Amber Glass CG2805-001 4L 4x4L Amber Glass
hplc/acs cs3317
For Use in Liquid Chromatography and Spectrophotometry Packaged under Nitrogen. Submicron filtered. (Stabilized with 0.5-1.0% Ethanol v/v)
specifications Acetone and Aldehyde Passes Test Acid and Chloride Passes Test Assay (excluding Ethanol) Min. 99.9 % Color (APHA) Max. 10 Free Chlorine (as Cl) Passes Test Lead (Pb) Max. 0.05 ppm Residue after Evaporation Max. 5 ppm Stabilizer (Ethanol, v/v %) 0.5 - 1.0 Substances Darkened by Sulfuric Acid Passes Test Suitability for use in Dithizone Tests Passes Test Water Max. 0.03 % Optical Absorbance at 245 nm Max. 1.00 255 nm Max. 0.15 260 nm Max. 0.05 270 nm Max. 0.02 290 nm Max. 0.01 400 nm Max. 0.01
packaging product number Unit size case size CS3317-008 204L 204L Metal Drum
hplc/spectro cs1334
For Use in Liquid Chromatography and Spectrophotometry Packaged under Nitrogen. Submicron filtered. Also meets ACS specifications. (Stabilized with 0.5-1.0% Ethanol v/v)
71 specifications Acetone and Aldehyde Passes Test Acid and Chloride Passes Test Assay (excluding Ethanol) Min. 99.9 % Color (APHA) Max. 10 Free Chlorine (as Cl) Passes Test Lead (Pb) Max. 0.05 ppm Residue after Evaporation Max. 3 ppm Stabilizer (Ethanol, v/v %) 0.5 - 1.0 Substances Darkened by Sulfuric Acid Passes Test Suitability for use in Dithizone Tests Passes Test Water Max. 0.02 % Optical Absorbance at 245 nm Max. 1.00 255 nm Max. 0.15 260 nm Max. 0.05 270 nm Max. 0.02 290 nm Max. 0.01 400 nm Max. 0.01
packaging product number Unit size case size CS1334-065 1L 1L Amber Glass CS1334-002 1L 6x1L Amber Glass CS1334-073 4L 4L PVC Coated Amber Glass CS1334-048 4L 4L Amber Glass CS1334-006 4L 4x4L PVC Coated Amber Glass CS1334-001 4L 4x4L Amber Glass
3-CHlOROMETHYlOxIRANESee Epichlorohydrin
CYClOHExANE C
6H
12 FW 84.16 CAS 110-82-7
MP 6.5°C BP 80.7°C D 0.779 Merck Index 13, 2752 FP -18°C NFPA 1-3-0 Storage Code: RED IMO Cyclohexane, 3, UN1145, PG II
physical properties Boiling Point 80.7°C Density (g/ml) at 25°C 0.779 Dielectric Constant at 20°C 2.02 Elutropic Value (Silica) 0.03 Refractive Index (n20°/D) 1.426 Viscosity (cps) at 20°C 1
absolv ca1343
For Use in Liquid Chromatography, Spectrophotometry, and for Organic Residue Analysis Packaged under Nitrogen.
specifications Assay Min. 99.9 % Color (APHA) Max. 10 Fluorescence Background (as Quinine Sulfate) Max. 1 ppb
GC-ECD Responsive Residue (as Heptachlor Epoxide) Max. 10 ppt GC-FID Responsive Residue (as 2-Octanol) Max. 10 ppb Residue after Evaporation Max. 1 ppm Water Max. 0.02 % Optical Absorbance at 202 nm Max. 1.00 205 nm Max. 0.88 210 nm Max. 0.67 240 nm Max. 0.05 254 nm Max. 0.01
packaging product number Unit size case size CA1343-065 1L 1L Amber Glass CA1343-002 1L 6x1L Amber Glass CA1343-048 4L 4L Amber Glass CA1343-001 4L 4x4L Amber Glass
acs cr0392
Meets reagent specifications for testing USP/NF monographs.
specifications Appearance (clear, colorless liquid) Passes Test Assay Min. 99.0 % Color (APHA) Max. 10 Residue after Evaporation Max. 0.002 % Substances Darkened by Sulfuric Acid Passes Test Water Max. 0.02 %
packaging product number Unit size case size CR0392-065 1L 1L Amber Glass CR0392-002 1L 6x1L Amber Glass CR0392-008 204L 204L Metal Drum CR0392-007 20L 20L Metal Pail CR0392-073 4L 4L PVC Coated Amber Glass CR0392-048 4L 4L Amber Glass
CR0392-006 4L 4x4L PVC Coated Amber Glass CR0392-001 4L 4x4L Amber Glass
Chl-Cyc
72CYClOHExANE (CONTINUED)
acs plUs cr2527
Meets reagent specifications for testing USP/NF monographs.
specifications Appearance Clear Assay Min. 99.0 % Residue after Evaporation Max. 0.002 % Water Max. 0.02 % Color (APHA) Max. 10 Substances Darkened by H
2SO
5 Passes Test
Tracemetals Aluminum (Al) Max. 0.5 ppm Barium (Ba) Max. 0.1 ppm Boron (B) Max. 0.02 ppm Cadmium (Cd) Max. 0.05 ppm Calcium (Ca) Max. 0.5 ppm Chromium (Cr) Max. 0.02 ppm Cobalt (Co) Max. 0.02 ppm Copper (Cu) Max. 0.02 ppm Iron (Fe) Max. 0.1 ppm Lead (Pb) Max. 0.1 ppm Magnesium (Mg) Max. 0.1 ppm Manganese (Mn) Max. 0.02 ppm Nickel (Ni) Max. 0.02 ppm Tin (Sn) Max. 0.1 ppm Zinc (Zn) Max. 0.1 ppm
packaging product number Unit size case size CR2527-065 1L 1L Amber Glass CR2527-002 1L 6x1L Amber Glass CR2527-048 4L 4L Amber Glass CR2527-001 4L 4x4L Amber Glass
anhydrosolv ch3833
Packaged under Nitrogen in Septum Sealed Bottle
specifications Appearance (clear liquid) Passes Test Assay Min. 99.5 % Color (APHA) Max. 10 Residue after Evaporation Max. 5 mg/L Max. 5 ppm Water Max. 10 ppm
packaging product number Unit size case size CH3833-174 100ml 100ml Amber Glass with Septum Seal CH3833-100 100ml 6x100ml Amber Glass with Septum Seal CH3833-150 1L 6x1L Amber Glass with Septum Seal CH3833-041 1L 1L Amber Glass with Septum Seal
gc cg1342
For Organic Residue Analysis Packaged under Nitrogen.
specifications Assay Min. 99.5 % Residue after Evaporation Max. 3 ppm Water Max. 0.02 % Color (APHA) Max. 10 GC-ECD Halogenated Residue (as Heptachlor Epoxide) Max. 10 ppt GC-FID Responsive Residue (as 2-Octanol) Max. 5 ppb Fluorescence Background Max. 1 ppb Optical Absorbance between 190 – 400 nmm Passes Test
packaging product number Unit size case size CG1342-065 1L 1L Amber Glass CG1342-002 1L 6x1L Amber Glass CG1342-048 4L 4L Amber Glass CG1342-001 4L 4x4L Amber Glass
hplc/spectro cs1341
For Use in Liquid Chromatography and Spectrophotometry Packaged under Nitrogen. Submicron filtered.
specifications Assay Min. 99.5 % Color (APHA) Max. 10 Residue after Evaporation Max. 3 ppm Water Max. 0.02 % Optical Absorbance at 202 nm Max. 1.00 205 nm Max. 0.88 210 nm Max. 0.67 240 nm Max. 0.05 254 nm Max. 0.01 400 nm Max. 0.01
packaging product number Unit size case size CS1341-065 1L 1L Amber Glass CS1341-002 1L 6x1L Amber Glass CS1341-073 4L 4L PVC Coated Amber Glass CS1341-048 4L 4L Amber Glass CS1341-006 4L 4x4L PVC Coated Amber Glass CS1341-001 4L 4x4L Amber Glass
73CYClOHExANOl C
6H
11OH FW 100.16 CAS 108-93-0
MP 20-22°C BP 160-161°C D 0.948 Merck Index 13,2754 FP 67°C NFPA 1-2-0 Storage Code: RED
certified cr0393
specifications Assay Min. 97 % Water Max. 0.1 %
packaging product number Unit size case size CR0393-065 1L 1L Amber Glass CR0393-002 1L 6x1L Amber Glass CR0393-048 4L 4L Amber Glass CR0393-001 4L 4x4L Amber Glass
CYClOHExANONE C
6H
10(=O) FW 98.15 CAS 108-94-1
MP -47°C BP 155°C D 0.947 Merck Index 13,2755 FP 46°C NFPA 1-2-0 Storage Code: RED IMO Cyclohexanone, 3, UN1915, PG III
acs cr0394
specifications Assay Min. 99.0 % Color (APHA) Max. 10 Residue after Evaporation Max. 0.05 % Water Max. 0.05 %
packaging product number Unit size case size CR0394-065 1L 1L Amber Glass CR0394-002 1L 6x1L Amber Glass CR0394-048 4L 4L Amber Glass CR0394-001 4L 4x4L Amber Glass
CYClOHExENE C
6H
10 FW 82.15 CAS 110-83-8
MP -104°C BP 83°C D 0.811 Merck Index 13,2756 FP -12°C NFPA 1-3-0 Storage Code: RED IMO Cyclohexene, 3, UN2256, PG II
certified cr0395
specifications Assay Min. 99.0 % Water Max. 0.02 %
packaging product number Unit size case size CR0395-065 1L 1L Amber Glass
CR0395-002 1L 6x1L Amber Glass CR0395-048 4L 4L Amber Glass CR0395-001 4L 4x4L Amber Glass
CYClOHExYlAMINE C
6H
11NH
2 FW 99.18 CAS 108-91-8
MP -17°C BP 134°C D 0.867 Merck Index 13,2758 FP 32°C NFPA 3-3-0 Storage Code: RED IMO Cyclohexylamine, 8, UN2357, PG II
certified cr0396
specifications Assay Min. 99.0 % Color (APHA) Max. 10
packaging product number Unit size case size CR0396-065 1L 1L Amber Glass CR0396-002 1L 6x1L Amber Glass
CYClOPENTANE 75% C
5H
10 FW 70.14 CAS 287-92-3
MP -94°C BP 50°C D 0.751 Merck Index 13,2769 FP -37°C NFPA 1-3-0 Storage Code: RED IIMO Cyclopentane, 3, UN1146, PG II
physical properties Boiling Point 50°C Density (g/ml) at 25°C 0.751 Refractive Index (n20°/D) 1.4
certified cr0397
specifications Assay (Cyclopentane) Min. 75.0 % Assay (as Mixtures of C5 and C6 Hydrocarbons) Min. 99.8 %
packaging product number Unit size case size CR0397-065 1L 1L Amber Glass CR0397-002 1L 6x1L Amber Glass CR0397-048 4L 4L Amber Glass CR0397-001 4L 4x4L Amber Glass
Cyc-
74CYClOPENTANE C
5H
10 FW 70.14 CAS 287-92-3
MP -94°C BP 50°C D 0.751 Merck Index 13,2769 FP -37°C NFPA 1-3-0 Storage Code: RED IMO Cyclopentane, 3, UN1146, PG II
physical properties Boiling Point 50°C Density (g/ml) at 25°C 0.751 Refractive Index (n20°/D) 1.4
hplc/spectro cs1351
For Use in Liquid Chromatography and Spectrophotometry
specifications Assay (Cyclopentane) Min. 75.0 % Assay (as Mixtures of C5 and C6 Hydrocarbons) Min. 99.8 % Color (APHA) Max. 10 Residue after Evaporation Max. 3 ppm Water Max. 0.02 % Optical Absorbance at 198 nm Max. 1.00 210 nm Max. 0.50 220 nm Max. 0.10 240 nm Max. 0.01 400 nm Max. 0.01
packaging product number Unit size case size CS1351-065 1L 1L Amber Glass CS1351-002 1L 6x1L Amber Glass CS1351-048 4L 4L Amber Glass CS1351-001 4L 4x4L Amber Glass
CYClOPENTANONE C
5H
8(=O) FW 84.12 CAS 120-92-3
MP -51°C BP 130-131°CC D 0.951 Merck Index 13,2771 FP 30°C NFPA 2-3-0 Storage Code: RED IMO Cyclopentanone, 3, UN2245, PG III
certified cr0398
specifications Assay Min. 99.0 %
packaging product number Unit size case size CR0398-053 500ml 500ml Amber Glass CR0398-013 500ml 6x500ml Amber Glass
DEblOCK SOlUTION, 1% TCA IN DCM (W/v) NFPA 3-1-1 Storage Code: BLUE IMO Corrosive Liquid, Toxic N.O.S. (Trichloroacetic Acid, Dichloromethane), 8 (6.1), UN2922, PG II
bio db3992
For Oligonucleotide Synthesis
specifications Appearance (clear, colorless liquid) Passes Test Trichloroacetic Acid (w/v %) 0.8 - 1.2 Color (APHA) Max. 10 Water Max. 150 ppm Dichloromethane Component Purity Min. 99.9 % Trichloroacetic Acid Component Purity Min. 99.0 %
packaging product number Unit size case size DB3992-059 2.5L 2.5L Amber Glass DB3992-057 2.5L 2.5L GL-45 Amber Glass DB3992-055 2.5L 4x2.5L GL-45 Amber Glass DB3992-014 2.5L 4x2.5L Amber Glass DB3992-056 200ml 200ml Amber Glass DB3992-027 200ml 6x200ml Amber Glass DB3992-054 450ml 450ml Amber Glass DB3992-032 450ml 6x450ml Amber Glass DB3992-048 4L 4L Amber Glass DB3992-001 4L 4x4L Amber Glass
DEblOCK SOlUTION, 2% TCA IN DCM (W/v) NFPA 3-1-1 Storage Code: BLUE IMO Corrosive Liquid, Toxic N.O.S. (Trichloroacetic Acid, Dichloromethane), 8 (6.1), UN2922, PG II
bio db3991
For Oligonucleotide Synthesis
specifications Appearance (clear, colorless liquid) Passes Test Trichloroacetic Acid (w/v %) 1.8 - 2.2 Color (APHA) Max. 10 Water Max. 150 ppm Dichloromethane Component Purity Min. 99.9 % Trichloroacetic Acid Component Purity Min. 99.0 %
packaging product number Unit size case size DB3991-059 2.5L 2.5L Amber Glass DB3991-057 2.5L 2.5L GL-45 Amber Glass DB3991-055 2.5L 4x2.5L GL-45 Amber Glass
75 DB3991-014 2.5L 4x2.5L Amber Glass DB3991-056 200ml 200ml Amber Glass DB3991-027 200ml 6x200ml Amber Glass DB3991-054 450ml 450ml Amber Glass DB3991-032 450ml 6x450ml Amber Glass DB3991-048 4L 4L Amber Glass DB3991-001 4L 4x4L Amber Glass
DEblOCK SOlUTION, 3% DCA IN DCM (v/v) NFPA 3-1-1 Storage Code: BLUE IMO Corrosive Liquid, Toxic N.O.S. (Dichloroacetic Acid, Dichloromethane), 8 (6.1), UN2922, PG II
bio db3988
For Oligonucleotide Synthesis
specifications Appearance (clear, colorless liquid) Passes Test Dichloroacetic Acid (v/v %) 2.95 - 3.05 Color (APHA) Max. 10 Water Max. 150 ppm Dichloromethane Component Purity Min. 99.9 % Dichloroacetic Acid Component Purity Min. 98.0 %
packaging product number Unit size case size DB3988-059 2.5L 2.5L Amber Glass DB3988-057 2.5L 2.5L GL-45 Amber Glass DB3988-055 2.5L 4x2.5L GL-45 Amber Glass DB3988-014 2.5L 4x2.5L Amber Glass DB3988-056 200ml 200ml Amber Glass DB3988-027 200ml 6x200ml Amber Glass DB3988-054 450ml 450ml Amber Glass DB3988-032 450ml 6x450ml Amber Glass DB3988-048 4L 4L Amber Glass DB3988-001 4L 4x4L Amber Glass
DEblOCK SOlUTION, 3% DCA IN TOlUENE (v/v) NFPA 3-3-1 Storage Code: RED IMO Flammable Liquid, Corrosive N.O.S. (Toluene, Dichloroacetic Acid), 3 (8), UN2924, PG II
bio db0490
For Oligonucleotide Synthesis
specifications Appearance (clear, colorless liquid) Passes Test Dichloroacetic Acid (v/v %) 2.95 - 3.0 Water Max. 150 ppm
Color (APHA) Max. 10 Toluene Component Purity Min. 99.9% Dichloroacetic Acid Component Purity Min. 98.0%
packaging product number Unit size case size DB0490-059 2.5L 2.5L Amber Glass DB0490-057 2.5L 2.5L GL-45 Amber Glass DB0490-055 2.5L 4x2.5L GL-45 Amber Glass DB0490-014 2.5L 4x2.5L Amber Glass DB0490-056 200ml 200ml Amber Glass DB0490-027 200ml 6x200ml Amber Glass DB0490-054 450ml 450ml Amber Glass DB0490-032 450ml 6x450ml Amber Glass DB0490-048 4L 4L Amber Glass DB0490-001 4L 4x4L Amber Glass
DEblOCK SOlUTION, 3% TCA IN DCM (W/v) NFPA 3-1-1 Storage Code: BLUE IMO Corrosive Liquid, Toxic N.O.S. (Trichloroacetic Acid, Dichloromethane), 8 (6.1), UN2922, PG II
bio db3990
For Oligonucleotide Synthesis
specifications Appearance (clear, colorless liquid) Passes Test Trichloroacetic Acid (w/v %) 2.9 - 3.1 Color (APHA) Max. 10 IR spectra (conforms to structure) Passes Test Water Max. 150 ppm Dichloromethane Component Purity Min. 99.9 % Trichloroacetic Acid Component Purity Min. 99.0 %
packaging product number Unit size case size DB3990-059 2.5L 2.5L Amber Glass DB3990-057 2.5L 2.5L GL-45 Amber Glass DB3990-055 2.5L 4x2.5L GL-45 Amber Glass DB3990-014 2.5L 4x2.5L Amber Glass DB3990-056 200ml 200ml Amber Glass DB3990-027 200ml 6x200ml Amber Glass DB3990-054 450ml 450ml Amber Glass DB3990-032 450ml 6x450ml Amber Glass DB3990-048 4L 4L Amber Glass DB3990-001 4L 4x4L Amber Glass
Cyc-Deb
76DEblOCK SOlUTION, 5% DCA IN TOlUENE (v/v) NFPA 3-3 -1 Storage Code: RED IMO Flammable Liquid, Corrosive N.O.S. (Toluene, Dichloroacetic Acid), 3 (8), UN2924, PG II
bio db3993
For Oligonucleotide Synthesis
specifications Appearance (clear, colorless liquid) Passes Test Dichloroacetic Acid (v/v %) 4.95 - 5.05 Color (APHA) Max. 10 Water Max. 150 ppm Toluene Component Purity Min. 99.9 % Dichloroacetic Acid Component Purity Min. 98.0 %
packaging product number Unit size case size DB3993-059 2.5L 2.5L Amber Glass DB3993-057 2.5L 2.5L GL-45 Amber Glass DB3993-055 2.5L 4x2.5L GL-45 Amber Glass DB3993-014 2.5L 4x2.5L Amber Glass DB3993-056 200ml 200ml Amber Glass DB3993-027 200ml 6x200ml Amber Glass DB3993-054 450ml 450ml Amber Glass DB3993-032 450ml 6x450ml Amber Glass DB3993-048 4L 4L Amber Glass DB3993-001 4L 4x4L Amber Glass
DECAHYDRONAPHTHAlENE(DECALINE)
C10
H18
FW 138.25 CAS 91-17-8 MP -125°C BP 189-191°C D 0.896 Merck Index 13,2866 FP 57°C NFPA 2-2-0 Storage Code: RED IMO Decahydronaphthalenes, 3, UN1147, PG III
certified dr0401
(mixture of cis- and trans-)
specifications Assay Min. 99.0 %
packaging product number Unit size case size DR0401-065 1L 1L Amber Glass DR0401-002 1L 6x1L Amber Glass DR0401-048 4L 4L Amber Glass DR0401-001 4L 4x4L Amber Glass
n-DECANE 99% CH
3(CH
2)
8CH
3 FW 142.29 CAS 124-18-5
MP-30°C BP 174°C D 0.730 FP 46°C NFPA 0-2-0 Storage Code: RED
certified dr0399
specifications Assay Min. 99.0 % Color (APHA) Max. 10 Water Max. 0.02 %
packaging product number Unit size case size DR0399-065 1L 1L Amber Glass DR0399-002 1L 6x1L Amber Glass
1-DECANESUlFONIC ACID, SODIUM SAlT(SODIUM 1-DECANESULFONATE)
CH3(CH
2)
9SO
3Na FW 244.33 CAS 13419-61-9
NFPA 2-1-0 Storage Code: GREEN IMO Decanesulfonic Acid,1- Sodium salt
hplc ds3398
For Ion-Pair Chromatography of Basic Compounds
specifications Assay Min. 98.0 % Optical Absorbance of 0.005M Solution at 200 nm Max. 0.05 210 nm Max. 0.03 220 nm Max. 0.02 230 nm Max. 0.02 240 nm Max. 0.01 280 nm Max. 0.01
packaging product number Unit size case size DS3398-019 100g 100g Amber Glass DS3398-009 25g 25g Amber Glass
DECANOIC ACID(CAPRIC ACID)
CH3(CH
2)
8CO
2H FW 172.27 CAS 334-48-5
MP 31-32°C BP 268-270°C D 0.893 Merck Index 13,1764 FP 110°C NFPA 2-1-0 Storage Code: BLUE
certified dr0402
specifications Assay Min. 99.0 %
77
packaging product number Unit size case size DR0402-065 1L 1L Amber Glass DR0402-002 1L 6x1L Amber Glass DR0402-048 4L 4L Amber Glass DR0402-001 4L 4x4L Amber Glass
1-DECANOlSee Decyl Alcohol
DECYl AlCOHOl(1-DECANOL)
CH3(CH
2)
9OH FW 158.29 CAS 112-30-1
MP 7°C BP 231°C D 0.829 Merck Index 13,2875 FP 82°C NFPA 0-2-0 Storage Code: GREEN
certified dr0405
Meets reagent specifications for testing USP/NF monographs.
specifications Assay Min. 99 % Water Max. 0.1 %
packaging product number Unit size case size DR0405-065 1L 1L Amber Glass DR0405-002 1L 6x1L Amber Glass
1,2-DIAMINOETHANESee Ethylenediamine
DIACETONE AlCOHOl(4-HYDROxY-4-METHYL-2-PENTANONE)
(CH3)
2C(OH)CH
2COCH
3 FW 116.16 CAS 123-42-2
BP 166°C D 0.931 Merck Index 12,3008 FP 61°C NFPA 1-2-0 Storage Code: RED IMO Diacetone Alcohol, 3, UN1148, PG II
certified dr0415
specifications Assay Min. 99.0 % Color (APHA) Max. 25 Water Max. 0.15 %
packaging product number Unit size case size DR0415-065 1L 1L Amber Glass DR0415-002 1L 6x1L Amber Glass DR0415-048 4L 4L Amber Glass DR0415-001 4L 4x4L Amber Glass
1,2-DIbROMOETHANE(ETHYLENE DIBROMIDE)
BrCH2CH
2Br FW 187.87 CAS 106-93-4
MP 9-10°C BP 131-132°C D 2.180 Merck Index 13,3830 NFPA 3-0-0 Storage Code: BLUE Cancer Suspect Agent IMO Ethylene Dibromide, 6.1, UN1605, PG I
certified dr0417
specifications Assay Min. 99.0 %
packaging product number Unit size case size DR0417-065 1L 1L Amber Glass DR0417-002 1L 6x1L Amber Glass DR0417-048 4L 4L Amber Glass DR0417-001 4L 4x4L Amber Glass
DIbUTYl PHTHAlATE(BUTYL PHTHALATE)
C6H
4-1,2-[CO
2(CH
2)3CH
3]2 FW 278.35 CAS 84-74-2
MP -35°C BP 340°C D 1.043 Merck Index 13,1856 FP 171°C NFPA 2-1-0 Storage Code: GREEN IMO Environmentally Hazardous Substance, Liquid, 9, UN3082, PG III
certified dr0420
specifications Assay Min. 99.0 % Color (APHA) Max. 10 Water Max. 0.1 %
packaging product number Unit size case size DR0420-065 1L 1L Amber Glass DR0420-002 1L 6x1L Amber Glass DR0420-048 4L 4L Amber Glass DR0420-001 4L 4x4L Amber Glass
Deb-Dib
78DIbUTYlAMINE [CH
3(CH
2)
3]
2NH FW 129.25 CAS 111-92-2
MP -62°C BP 159°C D 0.767 Merck Index 132,3058 FP 41°C NFPA 3-2-0 Storage Code: WHITE IMO Di-n-Butylamine, 8, UN2248, PG II
certified dr0419
specifications Assay Min. 99.0 % Color (APHA) Max. 15 Water Max. 0.3 %
packaging product number Unit size case size DR0419-065 1L 1L Amber Glass DR0419-002 1L 6x1L Amber Glass DR0419-048 4L 4L Amber Glass DR0419-001 4L 4x4L Amber Glass
DIbUTYl ETHERSee Butyl Ether
DICHlOROACETIC ACID C
2H
2Cl
2O
2 FW 128.91 CAS 79-43-6
MP 11-13°C BP 194°C D 1.560 FP 112°C NFPA 3-1-0 Storage Code: WHITE
certified dr0418
Meets reagent specifications for testing USP/NF monographs.
specifications Appearance Passes Test Assay Min. 98.0 % Color (APHA) Max. 10 Water Max. 0.02 %
packaging product number Unit size case size DR0418-053 500ml 500ml Amber Glass DR0418-013 500ml 6x500ml Amber Glass
o-DICHlORObENzENE C
6H
4Cl
2 FW 147.00 CAS 95-50-1
MP -17°C BP 180°C D 1.306 Merck Index 13,3081 FP 65°C NFPA 2-2-0 Storage Code: BLUE Marine Pollutant IMO ortho-Dichlorobenzene, 6.1, UN1591, PG III
physical properties Boiling Point 180°C Density (g/ml) at 25°C 1.306 Dielectric Constant at 25°C 9.93
Refractive Index (n20°/D) 1.551 Viscosity (cps) at 20°C 1.324
certified dr0421
specifications Acidity (as HCI) Max. 0.005 % Assay Min. 98.0 % Residue after Evaporation Max. 0.005 % Water Max. 0.1 %
packaging product number Unit size case size DR0421-065 1L 1L Amber Glass DR0421-002 1L 6x1L Amber Glass DR0421-048 4L 4L Amber Glass DR0421-001 4L 4x4L Amber Glass
hplc/spectro ds1411
For Use in Liquid Chromatography and Spectrophotometry Packaged under Nitrogen. Submicron filtered.
specifications Assay Min. 98.0 % Residue after Evaporation Max. 5 ppm Water Max. 0.02 % Optical Absorbance at 296 nm Max. 1.00 300 nm Max. 0.30 325 nm Max. 0.10 350 nm Max. 0.05 400 nm Max. 0.01
packaging product number Unit size case size DS1411-065 1L 1L Amber Glass DS1411-002 1L 6x1L Amber Glass DS1411-048 4L 4L Amber Glass DS1411-001 4L 4x4L Amber Glass
1,2-DICHlOROETHANE(ETHYLENE DICHLORIDE)
ClCH2CH
2Cl FW 98.96 CAS 107-06-2
MP -35°C BP 83°C D 1.256 Merck Index 13,3831 FP 15°C NFPA 2-3-0 Storage Code: RED Cancer Suspect Agent IMO Ethylene Dichloride, 3 (6.1), UN1184, PG II
physical properties Boiling Point (760mm) 83°C Density (g/ml) at 25°C 1.256 Dielectric Constant at 25°C 10.36 Refractive Index (n20°/D) 1.445 Viscosity (cps) at 20°C 0.79
79absolv da1420
For Use in Liquid Chromatography, Spectrophotometry, and for Organic Residue Analysis Packaged under Nitrogen.
specifications Assay Min. 99.9 % Color (APHA) Max. 10 GC-ECD Responsive Residue (as Heptachlor Epoxide) Max. 10 ppt Fluorescence Background (as Quinine Sulfate) Max. 1 ppb Residue after Evaporation Max. 1 ppm Water Max. 0.02 % Optical Absorbance at 226 nm Max. 1.00 230 nm Max. 0.50 240 nm Max. 0.10 245 nm Max. 0.05 250 nm Max. 0.02 300 nm Max. 0.005
packaging product number Unit size case size DA1420-065 1L 1L Amber Glass DA1420-002 1L 6x1L Amber Glass DA1420-048 4L 4L Amber Glass DA1420-001 4L 4x4L Amber Glass
acs dr0426
specifications Appearance Passes Test Assay Min. 99.0 % Color (APHA) Max. 10 Residue after Evaporation Max. 0.002 % Titrable Acid Max. 0.0003 meq/g Water Max. 0.03 %
packaging product number Unit size case size DR0426-065 1L 1L Amber Glass DR0426-002 1L 6x1L Amber Glass DR0426-048 4L 4L Amber Glass DR0426-001 4L 4x4L Amber Glass
anhydrosolv dh3839
Packaged under Nitrogen in Septum Sealed Bottle
specifications Assay Min. 99.0 % Residue after Evaporation Max. 3 ppm Water Max. 30 ppm
packaging product number Unit size case size DH3839-174 100ml 100ml Amber Glass with Septum Seal DH3839-100 100ml 6x100ml Amber Glass with Septum Seal
DH3839-150 1L 6x1L Amber Glass with Septum Seal DH3839-041 1L 1L Amber Glass with Septum Seal
hplc/spectro ds1421
For Use in Liquid Chromatography and Spectrophotometry Packaged under Nitrogen. Submicron filtered.
specifications Assay Min. 99.9 % Color (APHA) Max. 10 Residue after Evaporation Max. 3 ppm Water Max. 0.02 % Optical Absorbance at 226 nm Max. 1.00 230 nm Max. 0.50 240 nm Max. 0.10 245 nm Max. 0.05 250 nm Max. 0.02 300 nm Max. 0.005
packaging product number Unit size case size DS1421-065 1L 1L Amber Glass DS1421-002 1L 6x1L Amber Glass DS1421-048 4L 4L Amber Glass DS1421-001 4L 4x4L Amber Glass
DICHlOROMETHANE(METHYLENE CHLORIDE)
CH2Cl
2 FW 84.93 CAS 75-09-2
MP -97°C BP 40°C D 1.325 Merck Index 13,6088 NFPA 2-1-0 Storage Code: BLUE Cancer Suspect Agent IMO Dichloromethane, 6.1, UN1593, PG III
physical properties Boiling Point (760mm) 40°C Density (g/ml) at 25°C 1.325 Dielectric Constant at 25°C 8.93 Elutropic Value (Silica) 0.32 Refractive Index (n20°/D) 1.424 Viscosity (cps) at 20°C 0.44
Dib-Dic
80DICHlOROMETHANE(METHYLENE CHLORIDE) (CONTINUED)
absolv da1431
For Use in Liquid Chromatography, Spectrophotometry, and for Organic Residue Analysis Packaged under Nitrogen. (Stabilized with 40-200 ppm Amylene w/w)
specifications Assay Min. 99.9 % Color (APHA) Max. 10 GC-ECD Responsive Residue (as Heptachlor Epoxide) Max. 10 ppt GC-FID Responsive Residue (as 2-Octanol) Max. 5 ppb Fluorescence Background (as Quinine Sulfate) Max. 1 ppb Residue after Evaporation Max. 1 ppm Stabilizer (Amylenes, w/w) 100 - 200 ppm Water Max. 0.01 % Optical Absorbance at 233 nm Max. 1.00 240 nm Max. 0.12 254 nm Max. 0.01 350 nm Max. 0.005
packaging product number Unit size case size DA1431-065 1L 1L Amber Glass DA1431-002 1L 6x1L Amber Glass DA1431-048 4L 4L Amber Glass DA1431-001 4L 4x4L Amber Glass
acs dr0440
Meets reagent specifications for testing USP/NF monographs. (Stabilized with 40-200 ppm Amylene)
specifications Appearance (clear, colorless liquid) Passes Test Assay Min. 99.5 % Color (APHA) Max. 10 Free Halogens Passes Test Residue after Evaporation Max. 0.002 % Stabilizer (Amylenes, w/w) 100 - 200 ppm Titrable Acid Max. 0.0003 meq/g Water Max. 0.02 %
packaging product number Unit size case size DR0440-065 1L 1L Amber Glass DR0440-002 1L 6x1L Amber Glass DR0440-008 204L 204L Metal Drum DR0440-007 20L 20L Metal Pail DR0440-073 4L 4L PVC Coated Amber Glass DR0440-048 4L 4L Amber Glass
DR0440-006 4L 4x4L PVC Coated Amber Glass DR0440-001 4L 4x4L Amber Glass
acs plUs dr2532
Meets reagent specifications for testing USP/NF monographs. (Stabilized with 40-200 ppm Amylene)
specifications Appearance Clear Assay Min. 99.5 % Residue after Evaporation Max. 0.002 % Water Max. 0.02 % Color (APHA) Max. 10 Free Halogens Passes Test Tracemetals Aluminum (Al) Max. 0.5 ppm Barium (Ba) Max. 0.1 ppm Boron (B) Max. 0.02 ppm Cadmium (Cd) Max. 0.05 ppm Calcium (Ca) Max. 0.5 ppm Chromium (Cr) Max. 0.02 ppm Cobalt (Co) Max. 0.02 ppm Copper (Cu) Max. 0.02 ppm Iron (Fe) Max. 0.1 ppm Lead (Pb) Max. 0.1 ppm Magnesium (Mg) Max. 0.1 ppm Manganese (Mn) Max. 0.02 ppm Nickel (Ni) Max. 0.02 ppm Tin (Sn) Max. 0.1 ppm Zinc (Zn) Max. 0.1 ppm
packaging product number Unit size case size DR2532-065 1L 1L Amber Glass DR2532-002 1L 6x1L Amber Glass DR2532-048 4L 4L Amber Glass DR2532-001 4L 4x4L Amber Glass
anhydrosolv dh3842
Packaged under Nitrogen in Septum Sealed Bottle (Stabilized with 40-200 ppm Amylene)
specifications Assay Min. 99.8 % Residue after Evaporation Max. 5 ppm Stabilizer (Amylenes, w/w) 100 - 200 ppm Water Max. 10 ppm
packaging product number Unit size case size DH3842-174 100ml 100ml Amber Glass with Septum Seal DH3842-100 100ml 6x100ml Amber Glass with Septum Seal DH3842-150 1L 6x1L Amber Glass with Septum Seal DH3842-041 1L 1L Amber Glass with Septum Seal
81bio db2795
For Biotech Application Packaged under Nitrogen. Submicron filtered. (Stabilized with 40-200 ppm Amylene)
specifications Assay Min. 99.9 % Chloride (Cl) Max. 10 ppm Color (APHA) Max. 10 Residue after Evaporation Max. 3 ppm Stabilizer (Amylenes, w/w) 100 - 200 ppm Titrable Acid Max. 0.0003 meq/g Water Max. 0.003 % Optical Absorbance at 233 nm Max. 1.00 240 nm Max. 0.12 254 nm Max. 0.01 350 nm Max. 0.005
packaging product number Unit size case size DB2795-048 4L 4L Amber Glass DB2795-001 4L 4x4L Amber Glass
gc dg2810
For Organic Residue Analysis Packaged under Nitrogen. (Stabilized with 40-200 ppm Amylene)
specifications Assay Min. 99.9 % Chloride (Cl) Max. 10 ppm Color (APHA) Max. 10 GC-ECD Responsive Residue (as Heptachlor Epoxide) Max. 10 ppt GC-FID Responsive Residue (as 2-Octanol) Max. 5 ppb Residue after Evaporation Max. 1 ppm Stabilizer (Amylenes, w/w) 100 - 200 ppm Titrable Acid Max. 0.0003 meq/g Water Max. 0.01 %
packaging product number Unit size case size DG2810-065 1L 1L Amber Glass DG2810-002 1L 6x1L Amber Glass DG2810-048 4L 4L Amber Glass DG2810-001 4L 4x4L Amber Glass
hplc/acs ds3325
For Use in Liquid Chromatography and Spectrophotometry Packaged under Nitrogen. Submicron filtered. (Stabilized with 40-200 ppm Amylene)
specifications Assay Min. 99.8 % Appearance Passes Test Color (APHA) Max. 10 Residue after Evaporation Max. 5 ppm Stabilizer (Amylenes, w/w) 100 - 200 ppm
Water Max. 0.02 % Optical Absorbance at 233 nm Max. 1.00 240 nm Max. 0.20 260 nm Max. 0.02 300 nm Max. 0.01 400 nm Max. 0.005
packaging product number Unit size case size DS3325-008 204L 204L Metal Drum
hplc/spectro ds1432
For Use in Liquid Chromatography and Spectrophotometry Packaged under Nitrogen. Submicron filtered. Also meets ACS specifications. (Stabilized with 40-200 ppm Amylene)
specifications Appearance Passes Test Assay Min. 99.9 % Color (APHA) Max. 10 Free Halogens Passes Test Residue after Evaporation Max. 3 ppm Stabilizer (Amylenes, w/w) 100 - 200 ppm Titrable Acid Max. 0.0003 meq/g Water Max. 0.01 % Optical Absorbance at 233 nm Max. 1.00 240 nm Max. 0.20 260 nm Max. 0.02 300 nm Max. 0.01 350 nm Max. 0.005
packaging product number Unit size case size DS1432-065 1L 1L Amber Glass DS1432-002 1L 6x1L Amber Glass DS1432-073 4L 4L PVC Coated Amber Glass DS1432-048 4L 4L Amber Glass DS1432-006 4L 4x4L PVC Coated Amber Glass DS1432-001 4L 4x4L Amber Glass
nf dU1027
Meets NF Requirements
specifications Assay Min. 99.0 % Identification Passes Test Specific Gravity at 25ºC/25ºC 1.318 - 1.322 Limit of Hydrogen Chloride Max. 0.001 % Free Chlorine (as Cl) Passes Test Heavy Metals (as Pb) Max. 1 ppm Residue after Evaporation Max. 0.002 % Water Max. 0.02 %
packaging product number Unit size case size DU1027-048 4L 4L Amber Glass DU1027-001 4L 4x4L Amber Glass
Dic
82DICYClOPENTADIENE(CYCLOPENTADIENE DIMER)
C10
H12
FW 132.21 CAS 77-73-6 MP 33°C BP 170°C D 0.986 FP 45°C NFPA 1-3-1 Storage Code: RED IMO Dicyclopentadiene, 3, UN2048, PG III
certified dr0425
specifications Assay Min. 99.0 %
packaging product number Unit size case size DR0425-065 1L 1L Amber Glass DR0425-002 1L 6x1L Amber Glass DR0425-048 4L 4L Amber Glass DR0425-001 4L 4x4L Amber Glass
DIETHANOlAMINE (HOCH
2CH
2)
2NH FW 105.14 CAS 111-42-2
MP 27-30°C BP 217°C/150mm D 1.097 Merck Index 13,3134 FP 137°C NFPA 1-1-0 Storage Code: GREEN
acs dr0427
specifications Apparent Equivalent Weight 104.0 - 106.0 Assay Min. 98.5 % Color (APHA) Max. 15 Monoethanolamine Max. 1.0 % Residue after Ignition Max. 0.005 % Triethanolamine Max. 1.0 % Water Max. 0.15 %
packaging product number Unit size case size DR0427-065 1L 1L Amber Glass DR0427-002 1L 6x1L Amber Glass DR0427-048 4L 4L Amber Glass DR0427-001 4L 4x4L Amber Glass
DIETHYl ETHYlSee Ethyl Ether
DIETHYl KETONE(3-PENTANONE)
C2H
5COC
2H
5 FW 86.13 CAS 96-22-0
MP -40°C BP 102°C D 0.813 Merck Index 12,3170 FP 6°C NFPA1-3-0 Storage Code: RED IMO Diethyl Ketone, 3, UN1156, PG II
certified dr3177
specifications Acidity (as Acetic Acid) Max. 0.025 % Assay Min. 99.0 % Color (APHA) Max. 15 Water Max. 0.5 %
packaging product number Unit size case size DR3177-065 1L 1L Amber Glass DR3177-002 1L 6x1L Amber Glass DR3177-048 4L 4L Amber Glass DR3177-001 4L 4x4L Amber Glass
DIETHYl PHTHAlATE(ETHYL PHTHALATE)
C6H
4-1,2-(CO
2C
2H
5)
2 FW 222.24 CAS 84-66-2
MP -3°C BP 298-299°C D 1.118 Merck Index 13,7456 FP 160°C NFPA 0-1-0 Storage Code: GREEN
certified dr0437
specifications Assay Min. 99.0 %
packaging product number Unit size case size DR0437-065 1L 1L Amber Glass DR0437-002 1L 6x1L Amber Glass DR0437-048 4L 4L Amber Glass DR0437-001 4L 4x4L Amber Glass
DIETHYl SUlFATE(ETHYL SULFATE)
(C2H
5O)
2SO
2 FW 154.18 CAS 64-67-5
MP -24°C BP 208°C D 1.177 Merck Index 13,3156 FP 78°C NFPA 3-1-1 Storage Code: BLUE Cancer Suspect Agent
certified dr0438
specifications Assay Min. 98.0 %
packaging product number Unit size case size DR0438-065 1L 1L Amber Glass DR0438-002 1L 6x1L Amber Glass DR0438-048 4L 4L Amber Glass DR0438-001 4L 4x4L Amber Glass
DIETHYlAMINE (C
2H
5)
2NH FW 73.14 CAS 109-89-7
MP -50°C BP 55°C D 0.707 Merck Index 13,3138 FP -28°C NFPA 3-3-0
83 Storage Code: RED IMO Diethylamine, 3, UN1154, PG II
certified dr0428
specifications Assay Min. 99.0 % Residue after Evaporation Max. 0.01 % Water Max. 0.3 %
packaging product number Unit size case size DR0428-065 1L 1L Amber Glass DR0428-002 1L 6x1L Amber Glass DR0428-048 4L 4L Amber Glass DR0428-001 4L 4x4L Amber Glass
1,4-DIETHYlENE DIOxIDESee 1,4-Dioxane
DIETHYlENE GlYCOl O(HOCH
2CH
2)
2 FW 106.12 CAS 111-46-6
MP -10°C BP 245°C D 1.118 Merck Index 13,3146 FP 143°C NFPA 1-1-0 Storage Code: GREEN
certified dr0429
specifications Assay Min. 99.0 % Color (APHA) Max. 10 Residue after Evaporation Max. 0.01 % Water Max. 0.2 %
packaging product number Unit size case size DR0429-065 1L 1L Amber Glass DR0429-002 1L 6x1L Amber Glass DR0429-048 4L 4L Amber Glass DR0429-001 4L 4x4L Amber Glass
DIETHYlENE GlYCOl DIbUTYl ETHER [CH
3(CH
2)
3OCH
2CH
2]
2O FW 218.34 CAS 112-73-2
MP -60°C BP 256°C D 0.885 FP 117°C NFPA 1-1-0 Storage Code: GREEN
certified dr0430
specifications Assay Min. 99.0 %
packaging product number Unit size case size DR0430-065 1L 1L Amber Glass DR0430-002 1L 6x1L Amber Glass DR0430-048 4L 4L Amber Glass DR0430-001 4L 4x4L Amber Glass
DIETHYlENE GlYCOl DIETHYl ETHER[2-ETHOxYETHYL ETHER; BIS(2-ETHOxYETHYL) ETHER]
(C2H
5OCH
2CH
2)
2O FW 162.23 CAS 112-36-7
BP 180-190°C D 0.909 Merck Index 13,3145 FP 71°C NFPA 1-2-0 Storage Code: RED
certified dr0431
specifications Assay Min. 99.0 %
packaging product number Unit size case size DR0431-065 1L 1L Amber Glass DR0431-002 1L 6x1L Amber Glass DR0431-048 4L 4L Amber Glass DR0431-001 4L 4x4L Amber Glass
DIETHYlENE GlYCOl DIMETHYl ETHER[2-METHOxYETHYL ETHER; DIGLYME; BIS(2-METHOxYETHYL) ETHER]
(CH3OCH
2CH
2)
2O FW 134.18 CAS 111-96-6
MP -64°C BP 162°C D 0.937 Merck Index 13,3187 FP 70°C NFPA 1-2-1 Storage Code: RED IMO Ethers, N.O.S. (Diethylene Glycol Dimethyl Ether), 3, UN3271, PG III
certified dr0432
specifications Assay Min. 99.0 %
packaging product number Unit size case size DR0432-065 1L 1L Amber Glass DR0432-002 1L 6x1L Amber Glass DR0432-048 4L 4L Amber Glass DR0432-001 4L 4x4L Amber Glass
Dic-Die-
84DIETHYlENE GlYCOl MONObUTYl ETHER[2-(2-BUTOxYETHOxY)ETHANOL; BUTYL CARBITOL]
CH3(CH
2)
3OCH
2CH
2OCH
2CH
2OH
FW 162.23 CAS 112-34-5 MP -68°C BP 231°C D 0.967 Merck Index 13,1556 FP 100°C NFPA 1-1-0 Storage Code: GREEN
certified dr0433
specifications Assay Min. 99.0 %
packaging product number Unit size case size DR0433-065 1L 1L Amber Glass DR0433-002 1L 6x1L Amber Glass DR0433-048 4L 4L Amber Glass DR0433-001 4L 4x4L Amber Glass
DIETHYlENE GlYCOl MONObUTYl ETHER ACETATE[2-(2-BUTOxYETHOxY)ETHYL ACETATE]
CH3CO
2(CH
2CH
2O)
2(CH
2)
3CH
3
FW 204.27 CAS 124-17-4 BP 245°C D 0.978 FP 110°C NFPA 1-1-0 Storage Code: GREEN
certified dr4081
specifications Assay Min. 99 %
packaging product number Unit size case size DR4081-065 1L 1L Amber Glass DR4081-002 1L 6x1L Amber Glass DR4081-048 4L 4L Amber Glass DR4081-001 4L 4x4L Amber Glass
DIETHYlENE GlYCOl MONOETHYl ETHER[2-(2-ETHOxYETHOxY)ETHANOL; CARBITOL]
C2H
5OCH
2CH
2OCH
2CH
2OH
FW 134.18 CAS 111-90-0 BP 202°C D 0.999 Merck Index 13,1809 FP 96°C NFPA 1-1-0 Storage Code: GREEN
certified dr0434
specifications Assay Min. 99.0 %
packaging product number Unit size case size DR0434-065 1L 1L Amber Glass DR0434-002 1L 6x1L Amber Glass DR0434-048 4L 4L Amber Glass DR0434-001 4L 4x4L Amber Glass
DIETHYlENE GlYCOl MONOETHYl ETHER ACETATE[2-(2-ETHOxYETHOxY)ETHYL ACETATE; CARBITOL ACETATE]
CH3CO
2(CH
2CH
2O)
2C
2H
5
FW 176.21 CAS 112-15-2 BP 218-219°C D 1.012 FP 95°C NFPA 1-1-0 Storage Code: GREEN
certified dr0435
specifications Assay Min. 98.0 %
packaging product number Unit size case size DR0435-065 1L 1L Amber Glass DR0435-002 1L 6x1L Amber Glass DR0435-048 4L 4L Amber Glass DR0435-001 4L 4x4L Amber Glass
DIETHYlENE GlYCOl MONOHExYl ETHER[2-(2-HExYLOxYETHOxY)ETHANOL]
CH3(CH
2)
5OCH
2CH
2OCH
2CH
2OH
FW 190.29 CAS 112-59-4 MP -40°C BP 260°C D 0.935 FP 140°C NFPA 1-1-0 Storage Code: GREEN
certified dr3176
specifications Assay Min. 98 %
packaging product number Unit size case size DR3176-065 1L 1L Amber Glass DR3176-002 1L 6x1L Amber Glass DR3176-048 4L 4L Amber Glass DR3176-001 4L 4x4L Amber Glass
DIETHYlENE GlYCOl MONOMETHYl ETHER[2-(2-METHOxYETHOxY)ETHANOL]
CH3OCH
2CH
2OCH
2CH
2OH
FW 120.15 CAS 111-77-3 MP -70°C BP 194°C D 1.010 Merck Index 13,6064 FP 83°C NFPA 2-2-0 Storage Code: RED
85certified dr0436
specifications Assay Min. 99.0 %
packaging product number Unit size case size DR0436-065 1L 1L Amber Glass DR0436-002 1L 6x1L Amber Glass DR0436-048 4L 4L Amber Glass DR0436-001 4L 4x4L Amber Glass
DIGlYMESee Diethylene Glycol Dimethyl Ether
2,2’-DIHYDROxYDIETHYlAMINESee Diethanolamine
2,2’-DIHYDROxYETHYl ETHERSee Diethylene Glycol
DIISObUTYl KETONESee 2,6-Dimethyl-4-heptanone
DIISOPROPYlAMINE [(CH
3)
2CH]
2NH FW 101.19 CAS 108-18-9
MP -61°C BP 84°C D 0.772 Merck Index 13,3219 FP -6°C NFPA 3-3-0 Storage Code: RED IMO Diisopropylamine, 3 (8), UN1158, PG II
certified dr4082
specifications Assay Min. 99.5 %
packaging product number Unit size case size DR4082-065 1L 1L Amber Glass DR4082-002 1L 6x1L Amber Glass DR4082-048 4L 4L Amber Glass DR4082-001 4L 4x4L Amber Glass
DIISOPROPYl ETHERSee Isopropyl Ether
1,2-DIMETHOxYETHANOlSee Ethylene Glycol Dimethyl Ether
DIMETHYl PHTHAlATE C
6H
4-1,2-(CO
2CH
3)
2 FW 194.19 CAS 131-11-3
MP 2°C BP 282°C D 1.190 Merck Index 13,3281 FP 146°C NFPA 0-1-0 Storage Code: GREEN
certified dr0459
specifications Assay Min. 99.0 % Acidity (as Phthalic Acid) Max. 0.01 % Color (APHA) Max. 10 Water Max. 0.1 %
packaging product number Unit size case size DR0459-065 1L 1L Amber Glass DR0459-002 1L 6x1L Amber Glass DR0459-048 4L 4L Amber Glass DR0459-001 4L 4x4L Amber Glass
DIMETHYl SUlFOxIDE(METHYL SULFOxIDE)
(CH3)
2SO FW 78.13 CAS 67-68-5
MP 18.4°C BP 189°C D 1.101 Merck Index 13,3285 FP 85°C NFPA 1-1-0 Storage Code: GREEN
physical properties Boiling Point (760mm) 189°C Density (g/ml) at 25°C 1.101 Dielectric Constant at 25°C 46.68 Freezing Point 18.4°C Refractive Index (n20°/D) 1.479 Viscosity (cps) at 20°C 2.24
acs dr0469
Meets reagent specifications for testing USP/NF monographs.
specifications Appearance (clear, colorless liquid) Passes Test Assay Min. 99.9 % Residue after Evaporation Max. 0.01 % Titrable Acid Max. 0.001 meq/g Water Max. 0.1 %
packaging product number Unit size case size DR0469-065 1L 1L Amber Glass DR0469-002 1L 6x1L Amber Glass DR0469-031 20L 20L Poly Pail DR0469-048 4L 4L Amber Glass DR0469-001 4L 4x4L Amber Glass
Die-Dim
86DIMETHYl SUlFOxIDE(CONTINUED)
anhydrosolv dh3845
Packaged under Nitrogen in Septum Sealed Bottle
specifications Assay Min. 99.8 % Appearance Passes Test Color Max. 10 Residue after Evaporation Max. 5 ppm Water Max. 50 ppm
packaging product number Unit size case size DH3845-174 100ml 100ml Amber Glass with Septum Seal DH3845-100 100ml 6x100ml Amber Glass with Septum Seal DH3845-150 1L 6x1L Amber Glass with Septum Seal DH3845-139 1L 6x1L Amber Glass with Molecular Sieve DH3845-137 1L 1L Amber Glass with Molecular Sieve DH3845-041 1L 1L Amber Glass with Septum Seal
bio db0460
For Biotech Applications Packaged under Nitrogen. Submicron filtered.
specifications Assay Min. 99.8 % Color (APHA) Max. 10 Residue after Evaporation Max. 5 ppm Water Max. 0.025 % Optical Absorbance at 263 nm Max. 1.00 270 nm Max. 0.40 275 nm Max. 0.20 280 nm Max. 0.15 335 nm Max. 0.02 400 nm Max. 0.01
packaging product number Unit size case size DB0460-048 4L 4L Amber Glass DB0460-001 4L 4x4L Amber Glass
hplc/spectro ds1461
For Use in Liquid Chromatography and Spectrophotometry Packaged under Nitrogen. Submicron filtered. Meets reagent specifications for testing USP/NF monographs.
specifications Assay Min. 99.9 % Color (APHA) Max. 10 Residue after Evaporation Max. 5 ppm Water Max. 0.05 %
Optical Absorbance at 263 nm Max. 1.00 270 nm Max. 0.40 275 nm Max. 0.20 280 nm Max. 0.15 335 nm Max. 0.02 400 nm Max. 0.01
packaging product number Unit size case size DS1461-065 1L 1L Amber Glass DS1461-002 1L 6x1L Amber Glass DS1461-048 4L 4L Amber Glass DS1461-001 4L 4x4L Amber Glass
Usp dU0461
Meets USP Requirements
specifications Identification A Passes Test Identification B Passes Test Specific Gravity at 25°/25°C 1.095 – 1.101 Congealing Temperature Min. 18.3°C Refractive Index at 25°C 1.4755 - 1.4775 Acidity Passes Test Ultraviolet Absorbance (1.00-cm cell vs. water) (curve smooth throughout stated range with no extraneous impurity peaks): 275 nm Max. 0.20 Absorbance Ratio: 285/275 nm Max. 0.65 295/275 nm Max. 0.45 Substances Darkened by KOH Max. 0.046 Dimethyl Sulfone: Single Peak Max. 0.03% Total Peaks Max. 0.1% Nonvolatile Residue (USP), mg Max. 5.0 Assay Min. 99.9%
packaging product number Unit size case size DU0461-048 4L 4L Amber Glass DU0461-001 4L 4x4L Amber Glass
anhydrosolv dh3845
Packaged under Nitrogen in Septum Sealed Bottle
specifications Assay Min. 99.8 % Residue after Evaporation Max. 5 ppm Water Max. 50 ppm
packaging product number Unit size case size DH3845-174 100ml 100ml Amber Glass with Septum Seal DH3845-100 100ml 6x100ml Amber Glass with Septum Seal DH3845-150 1L 6x1L Amber Glass with Septum Seal
87 DH3845-139 1L 6x1L Amber Glass with Molecular Sieve DH3845-137 1L 1L Amber Glass with Molecular Sieve DH3845-041 1L 1L Amber Glass with Septum Seal
DIMETHYl KETONESee Acetone
2,6-DIMETHYl-4-HEPTANONE(DIISOBUTYL KETONE)
(CH3)
2CHCH
2COCH
2CH(CH
3)
2
FW 142.24 CAS 108-83-8 BP 169°C D 0.808 FP 45°C NFPA 1-2-0 Storage Code: RED IMO Diisobutyl Ketone, 3, UN1157, PG III
pUrified dr3180
specifications Assay Min. 80.0 % Color (APHA) Max. 20
packaging product number Unit size case size DR3180-065 1L 1L Amber Glass DR3180-002 1L 6x1L Amber Glass DR3180-048 4L 4L Amber Glass DR3180-001 4L 4x4L Amber Glass
N,N-DIMETHYlACETAMIDE CH
3CON(CH
3)
2 FW 87.12 CAS 127-19-5
MP -20°C BP 164.5-166°C D 0.937 Merck Index 13,3254 FP 70°C NFPA 2-2-0 Storage Code: RED
physical properties Boiling Range 164.5-166°C Density (g/ml) at 25°C 0.937 Dielectric Constant at 25°C 37.78 Refractive Index (n20°/D) 1.438
anhydrosolv dh3848
Packaged under Nitrogen in Septum Sealed Bottle
specifications Assay Min. 99.8 % Residue after Evaporation Max. 5 ppm Water Max. 50 ppm
packaging product number Unit size case size DH3848-174 100ml 100ml Amber Glass with Septum Seal DH3848-100 100ml 6x100ml Amber Glass with Septum Seal
DH3848-150 1L 6x1L Amber Glass with Septum Seal DH3848-139 1L 6x1L Amber Glass with Molecular Sieve DH3848-137 1L 1L Amber Glass with Molecular Sieve DH3848-041 1L 1L Amber Glass with Septum Seal
certified dr0448
specifications Assay Min. 99.5 % Residue after Evaporation Max. 0.005 % Water Max. 0.05 %
packaging product number Unit size case size DR0448-065 1L 1L Amber Glass DR0448-002 1L 6x1L Amber Glass DR0448-048 4L 4L Amber Glass DR0448-001 4L 4x4L Amber Glass
hplc/spectro ds1441
For Use in Liquid Chromatography and Spectrophotometry Packaged under Nitrogen. Submicron filtered.
specifications Assay Min. 99.5 % Residue after Evaporation Max. 5 ppm Water Max. 0.03 % Optical Absorbance at 270 nm Max. 1.00 280 nm Max. 0.30 290 nm Max. 0.15 310 nm Max. 0.05 320 nm Max. 0.03 360 nm Max. 0.01 400 nm Max. 0.01
packaging product number Unit size case size DS1441-065 1L 1L Amber Glass DS1441-002 1L 6x1L Amber Glass DS1441-048 4L 4L Amber Glass DS1441-001 4L 4x4L Amber Glass
Dim-
88N,N-DIMETHYlACETAMIDE(CONTINUED)
anhydrosolv dh3848
Packaged under Nitrogen in Septum Sealed Bottle
specifications Assay Min. 99.8 % Residue after Evaporation Max. 5 ppm Water Max. 50 ppm
packaging product number Unit size case size DH3848-174 100ml 100ml Amber Glass with Septum Seal DH3848-100 100ml 6x100ml Amber Glass with Septum Seal DH3848-150 1L 6x1L Amber Glass with Septum Seal DH3848-139 1L 6x1L Amber Glass with Molecular Sieve DH3848-137 1L 1L Amber Glass with Molecular Sieve DH3848-041 1L 1L Amber Glass with Septum Seal
N,N-DIMETHYlANIlINE(xYLIDINE)
C6H
5N(CH
3)
2 FW 121.18 CAS 121-69-7
MP 1.5-2.5°C BP 193-194°C D 0.956 Merck Index 13,3261 FP 62°C Storage Code: BLUE Cancer Suspect Agent IMO N,N-Dimethylaniline, 6.1, UN2253, PG II
certified dr0451
specifications Assay Min. 99.4 % Aniline and N-Methylanline Max. 0.5 Water Max. 0.1 %
packaging product number Unit size case size DR0451-065 1L 1L Amber Glass DR0451-002 1L 6x1L Amber Glass DR0451-048 4L 4L Amber Glass DR0451-001 4L 4x4L Amber Glass
DIMETHYlbENzENESee Xylene
N,N-DIMETHYlFORMAMIDE HCON(CH
3)
2 FW 73.10 CAS 68-12-2
MP -61°C BP 153°C D 0.944 Merck Index 13,3269 FP 57°C NFPA 1-2-0 Storage Code: Red Cancer Suspect Agent
IMO N,N-Dimethylformamide, 3, UN2265, PG III
physical properties Boiling Point (760mm) 153°C Density (g/ml) at 25°C 0.944 Dielectric Constant at 25°C 36.71 Refractive Index (n20°/D) 1.431 Viscosity (cps) at 20°C 0.92
acs dr0456
Meets reagent specifications for testing USP/NF monographs.
specifications Appearance Passes Test Assay Min. 99.8 % Color (APHA) Max. 15 Residue after Evaporation Max. 0.005 % Titrable Acid Max. 0.0005 meq/g Titrable Base Max. 0.003 meq/g Water Max. 0.15 %
packaging product number Unit size case size DR0456-065 1L 1L Amber Glass DR0456-002 1L 6x1L Amber Glass DR0456-007 20L 20L Metal Pail DR0456-048 4L 4L Amber Glass DR0456-001 4L 4x4L Amber Glass
acs plUs dr2536
Meets reagent specifications for testing USP/NF monographs.
specifications Appearance Clear Assay Min. 99.8 % Residue after Evaporation Max. 0.01 % Water Max. 0.15 % Color (APHA) Max. 15 Titrable Acid Max. 0.0005 meq/g Titrable Base Max. 0.003 meq/g Tracemetals Aluminum (Al) Max. 0.5 ppm Barium (Ba) Max. 0.1 ppm Boron (B) Max. 0.02 ppm Cadmium (Cd) Max. 0.05 ppm Calcium (Ca) Max. 0.5 ppm Chromium (Cr) Max. 0.02 ppm Cobalt (Co) Max. 0.02 ppm Copper (Cu) Max. 0.02 ppm Iron (Fe) Max. 0.1 ppm Lead (Pb) Max. 0.1 ppm Magnesium (Mg) Max. 0.1 ppm Manganese (Mn) Max. 0.02 ppm Nickel (Ni) Max. 0.02 ppm Tin (Sn) Max. 0.1 ppm Zinc (Zn) Max. 0.1 ppm
89 packaging product number Unit size case size DR2536-065 1L 1L Amber Glass DR2536-002 1L 6x1L Amber Glass DR2536-048 4L 4L Amber Glass DR2536-001 4L 4x4L Amber Glass
anhydrosolv dh3851
Packaged under Nitrogen in Septum Sealed Bottle
specifications Assay Min. 99.8 % Residue after Evaporation Max. 5 ppm Water Max. 50 ppm
packaging product number Unit size case size DH3851-174 100ml 100ml Amber Glass with Septum Seal DH3851-100 100ml 6x100ml Amber Glass with Septum Seal DH3851-150 1L 6x1L Amber Glass with Septum Seal DH3851-139 1L 6x1L Amber Glass with Molecular Sieve DH3851-137 1L 1L Amber Glass with Molecular Sieve DH3851-041 1L 1L Amber Glass with Septum Seal
bio db0455
For Biotech Applications Packaged under Nitrogen. Submicron filtered.
specifications Amines (as Dimethylamine) Max. 5 ppm Assay Min. 99.9 % Color (APHA) Max. 10 Residue after Evaporation Max. 5 ppm Water Max. 0.03 % Optical Absorbance at 270 nm Max. 1.00 275 nm Max. 0.30 295 nm Max. 0.10 310 nm Max. 0.05 340 nm Max. 0.01 400 nm Max. 0.01
packaging product number Unit size case size DB0455-136 4L 4x4L Amber Glass with Molecular Sieve DB0455-134 4L 4L Amber Glass with Molecular Sieve DB0455-048 4L 4L Amber Glass DB0455-001 4L 4x4L Amber Glass
hplc/spectro ds1451
For Use in Liquid Chromatography and Spectrophotometry Packaged under Nitrogen. Submicron filtered.
specifications Assay Min. 99.8 % Color (APHA) Max. 10 Residue after Evaporation Max. 5 ppm Water Max. 0.05 % Optical Absorbance at 270 nm Max. 1.00 275 nm Max. 0.30 295 nm Max. 0.10 310 nm Max. 0.05 340 nm Max. 0.01 400 nm Max. 0.01
packaging product number Unit size case size DS1451-065 1L 1L Amber Glass DS1451-002 1L 6x1L Amber Glass DS1451-048 4L 4L Amber Glass DS1451-001 4L 4x4L Amber Glass
anhydrosolv dh3851
Packaged under Nitrogen in Septum Sealed Bottle
specifications Assay Min. 99.8 % Residue after Evaporation Max. 5 ppm Water Max. 50 ppm
packaging product number Unit size case size DH3851-174 100ml 100ml Amber Glass with Septum Seal DH3851-100 100ml 6x100ml Amber Glass with Septum Seal DH3851-150 1L 6x1L Amber Glass with Septum Seal DH3851-139 1L 6x1L Amber Glass with Molecular Sieve DH3851-137 1L 1L Amber Glass with Molecular Sieve DH3851-041 1L 1L Amber Glass with Septum Seal
Dim-
90N,N-DIMETHYlFORMAMIDE (CONTINUED)
bio db0455
For Biotech Applications Packaged under Nitrogen. Submicron filtered.
specifications Amines (as Dimethylamine) Max. 5 ppm Assay Min. 99.9 % Color (APHA) Max. 10 Residue after Evaporation Max. 5 ppm Water Max. 0.03 % Optical Absorbance at 270 nm Max. 1.00 275 nm Max. 0.30 295 nm Max. 0.10 310 nm Max. 0.05 340 nm Max. 0.01 400 nm Max. 0.01
packaging product number Unit size case size DB0455-136 4L 4x4L Amber Glass with Molecular Sieve DB0455-134 4L 4L Amber Glass with Molecular Sieve DB0455-048 4L 4L Amber Glass DB0455-001 4L 4x4L Amber Glass
1,4-DIOxACYClOHExANESee 1,4-Dioxane
1,4-DIOxANE (CH
2)
4O
2 FW 88.11 CAS 123-91-1
MP 11.8°C BP 100-102°C D 1.034 Merck Index 13,3330 FP 12°C NFPA 2-3-1 Storage Code: RED Cancer Suspect Agent IMO Dioxane, 3, UN1165, PG II
physical properties Boiling Range (760mm) 100-102°C Density (g/ml) at 25°C 1.034 Dielectric Constant at 20°C 2.25 Freezing Point Min. 11.0°C Refractive Index (n20°/D) 1.422 Viscosity (cps) at 20°C 1.54
acs dr0480
Meets reagent specifications for testing USP/NF monographs.
specifications Assay Min. 99.0 % Carbonyl Compounds (as Formaldehyde) Max. 0.01 % Color (APHA) Max. 20
Freezing Point Min. 11.0°C Peroxides (as Hydrogen Peroxide, at time of packaging) Max. 0.005 % Residue after Evaporation Max. 0.005 % Titrable Acid Max. 0.0016 meq/g Water Max. 0.05 %
packaging product number Unit size case size DR0480-065 1L 1L Amber Glass DR0480-002 1L 6x1L Amber Glass DR0480-007 20L 20L Metal Pail DR0480-048 4L 4L Amber Glass DR0480-001 4L 4x4L Amber Glass
anhydrosolv dh3856
Packaged under Nitrogen in Septum Sealed Bottle
specifications Assay Min. 99.8 % Residue after Evaporation Max. 3 ppm Water Max. 30 ppm
packaging product number Unit size case size DH3856-174 100ml 100ml Amber Glass with Septum Seal DH3856-100 100ml 6x100ml Amber Glass with Septum Seal DH3856-150 1L 6x1L Amber Glass with Septum Seal DH3856-139 1L 6x1L Amber Glass with Molecular Sieve DH3856-137 1L 1L Amber Glass with Molecular Sieve DH3856-041 1L 1L Amber Glass with Septum Seal
histological dr0479
For use in Tissue Sampling and Processing
specifications Assay Min. 99.0 % Color (APHA) Max. 20 Residue after Evaporation Max. 0.005 % Water Max. 0.05 %
packaging product number Unit size case size DR0479-007 20L 20L Metal Pail DR0479-048 4L 4L Amber Glass DR0479-001 4L 4x4L Amber Glass
hplc/spectro ds1471
For use in Liquid Chromatography and Spectrophotometry Packaged under Nitrogen. Submicron filtered.
specifications Assay Min. 99.9 % Color (APHA) Max. 10
91 Peroxides (as Hydrogen Peroxide, at time of packaging) Max. 0.005 % Residue after Evaporation Max. 5 ppm Water Max. 0.05 % Optical Absorbance at 215 nm Max. 1.00 225 nm Max. 0.60 250 nm Max. 0.25 295 nm Max. 0.01 400 nm Max. 0.01
packaging product number Unit size case size DS1471-065 1L 1L Amber Glass DS1471-002 1L 6x1L Amber Glass DS1471-048 4L 4L Amber Glass DS1471-001 4L 4x4L Amber Glass
anhydrosolv dh3854
Packaged under Nitrogen in Septum Sealed Bottle
specifications Assay Min. 99.8 % Residue after Evaporation Max. 3 ppm Water Max. 30 ppm
packaging product number Unit size case size DH3854-174 100ml 100ml Amber Glass with Septum Seal DH3854-100 100ml 6x100ml Amber Glass with Septum Seal DH3854-150 1L 6x1L Amber Glass with Septum Seal DH3854-139 1L 6x1L Amber Glass with Molecular Sieve DH3854-137 1L 1L Amber Glass with Molecular Sieve DH3854-041 1L 1L Amber Glass with Septum Seal
DIOxACYClOHExANESee 1,4-Dioxane
DIPROPYlENE GlYCOl HOC
3H
6OC
3H
6OH FW 134.18 CAS 25265-71-8
D 1.023 FP 137°C NFPA 1-1-0 Storage Code: GREEN
certified dr3183
(Mixture of isomers)
specifications Assay Min. 99.0 %
packaging product number Unit size case size DR3183-065 1L 1L Amber Glass DR3183-002 1L 6x1L Amber Glass DR3183-048 4L 4L Amber Glass DR3183-001 4L 4x4L Amber Glass
DIPROPYlENE GlYCOl MONOMETHYl ETHER CH
3OC
3H
6OC
3H
6OH FW 148.20 CAS 34590-94-8
BP 90-91°C/12mm D 0.951 Merck Index 13,3378 FP 74°C NFPA 0-2-0 Storage Code: RED
certified dr3184
(Mixture of isomers)
specifications Assay Min. 97.0 %
packaging product number Unit size case size DR3184-065 1L 1L Amber Glass DR3184-002 1L 6x1L Amber Glass DR3184-048 4L 4L Amber Glass DR3184-001 4L 4x4L Amber Glass
DI-iso-PROPYl ETHERSee Isopropyl Ether
DISTIllED WATERSee Water
DMFSee N,N-Dimethylformamide
DODECANE 99% CH
3(CH
2)
10CH
3 FW 170.34 CAS 112-40-3
MP -12°C BP 216.2°C D 0.750 FP 71°C NFPA 0-2-0 Storage Code: RED
certified dr0484
specifications Assay Min. 99.0 %
packaging product number Unit size case size DR0484-065 1L 1L Amber Glass DR0484-002 1L 6x1L Amber Glass
Dim-Dod
921-DODECANESUlFONIC ACID, SODIUM SAlT(SODIUM 1-DODECANESULFONATE)
CH3(CH
2)
11SO
3Na FW 272.38 CAS 2386-53-0
NFPA 1-1-0 Storage Code: GREEN
hplc ds3400 For Ion-Pair Chromatography of Basic Compounds
specifications Assay Min. 99.0 % Optical Absorbance of 0.005M Solution at 210 nm Max. 0.05 220 nm Max. 0.03 230 nm Max. 0.02
packaging product number Unit size case size DS3400-019 100g 100g Amber Glass DS3400-009 25g 25g Amber Glass
1-DODECANOl CH
3(CH
2)
11OH FW 186.34 CAS 112-53-8
MP 22-26°C BP 260-262°C D 0.833 Merck Index 13,3439 FP 110°C NFPA 0-1-0 Storage Code: GREEN
acs dr0486
Meets reagent specifications for testing USP/NF monographs.
specifications Assay Min. 98.0 % Color (APHA) Max. 10 Water Max. 0.05 %
packaging product number Unit size case size DR0486-065 1L 1L Amber Glass DR0486-002 1L 6x1L Amber Glass DR0486-048 4L 4L Amber Glass DR0486-001 4L 4x4L Amber Glass
DODECYl AlCOHOlSee 1-Dodecanol
EPICHlOROHYDRIN(1-CHLORO-2,3-EPOxYPROPANE) C
3H
5ClO FW 92.53 CAS 106-89-8
MP -57°C BP 115-117°C D 1.183 Merck Index 13,3642 FP 33°C NFPA 3-3-2 Storage Code: RED Cancer Suspect Agent. Marine Pollutant. IMO Epichlorohydrin, 6.1, UN2023, PG II
certified er0495
specifications Assay Min. 99.5 % Color (APHA) Max. 10 Water Max. 0.1 %
packaging product number Unit size case size ER0495-065 1L 1L Amber Glass ER0495-002 1L 6x1L Amber Glass ER0495-048 4L 4L Amber Glass ER0495-001 4L 4x4L Amber Glass
1,2-EPOxYPROPANESee Propylene Oxide
ETHANOlAMINE(2-AMINOETHANOL)
H2NCH
2CH
2OH FW 61.08 CAS 141-43-5
MP 10.5°C BP 170°C D 1.012 Merck Index 13,3762 FP 93°C NFPA 3-2-0 Storage Code: WHITE IMO Ethanolamine, 8, UN2491, PG III
acs er0502
specifications Assay Min. 99.0 % Color (APHA) Max. 15 Heavy Metals (as Pb) Max. 5 ppm Iron (Fe) Max. 5 ppm Water Max. 0.30 %
packaging product number Unit size case size ER0502-065 1L 1L Amber Glass ER0502-002 1L 6x1L Amber Glass ER0502-048 4L 4L Amber Glass ER0502-001 4L 4x4L Amber Glass
1,2-ETHANEDIAMINESee Ethylenediamine
1,2-ETHANEDIOlSee Ethylene Glycol
ETHANOlSee Alcohol, Anhydrous
ETHANOl, UNDENATUREDSee Ethyl Alcohol, 200 Proof, Reagent
ETHANOlIC ACIDSee Acetic Acid
93ETHERSee Ethyl Ether
ETHER, PETROlEUMSee Petroleum Ether
2-ETHOxYETHANOlSee Ethylene Glycol Monoethyl Ether
2-ETHOxYETHYl ACETATESee Ethylene Glycol Monoethyl Ether Acetate
2-(2-ETHOxYETHOxY)ETHANOlSee Diethylene Glycol Monoethyl Ether
2-(2-ETHOxYETHOxY)ETHYl ACETATESee Diethylene Glycol Monoethyl Ether Acetate
ETHYl ACETATE CH
3CO
2C
2H
5 FW 88.11 CAS 141-78-6
MP -84°C BP 76.5-77.5°C D 0.902 Merck Index 13,3792 FP -3°C NFPA 1-3-0 Storage Code: RED IMO Ethyl Acetate, 3, UN1173, PG II
physical properties Boiling Range (760mm) 76.5-77.5°C Density (g/ml) at 25°C 0.902 Dielectric Constant at 25°C 6.02 Elutropic Value (Silica) 0.45 Refractive Index (n20°/D) 1.372 Viscosity (cps) at 20°C 0.45
absolv ea1511
For Use in Liquid Chromatography, Spectrophotometry, and for Organic Residue Analysis Packaged under Nitrogen.
specifications Assay Min. 99.9 % Color (APHA) Max. 10 GC-ECD Responsive Residue (as Heptachlor Epoxide) Max. 10 ppt GC-FID Responsive Residue (as 2-Octanol) Max. 5 ppb Fluorescence Background (as Quinine Sulfate) Max. 1 ppb Residue after Evaporation Max. 1 ppm Titrable Acid Max. 0.0009 meq/g Water Max. 0.05 % Optical Absorbance at 255 nm Max. 1.00 260 nm Max. 0.12 280 nm Max. 0.05
300 nm Max. 0.01 330 nm Max. 0.01 350 nm Max. 0.005
packaging product number Unit size case size EA1511-065 1L 1L Amber Glass EA1511-002 1L 6x1L Amber Glass EA1511-048 4L 4L Amber Glass EA1511-001 4L 4x4L Amber Glass
acs er0511
Meets reagent specifications for testing USP/NF monographs.
specifications Assay Min. 99.5 % Color (APHA) Max. 10 Residue after Evaporation Max. 0.003 % Substances Darkened by H
2SO
4 Passes Test
Titrable Acid Max. 0.0009 meq/g Water Max. 0.2 %
packaging product number Unit size case size ER0511-065 1L 1L Amber Glass ER0511-002 1L 6x1L Amber Glass ER0511-008 204L 204L Metal Drum ER0511-007 20L 20L Metal Pail ER0511-073 4L 4L PVC Coated Amber Glass ER0511-048 4L 4L Amber Glass ER0511-006 4L 4x4L PVC Coated Amber Glass ER0511-001 4L 4x4L Amber Glass
Dod-Eth
94ETHYl ACETATE (CONTINUED)
acs plUs er2540
Meets reagent specifications for testing USP/NF monographs.
specifications Assay Min. 99.5 % Residue after Evaporation Max. 0.003 % Water Max. 0.2 % Color (APHA) Max. 10 Substances Darkened by H
2SO
5 Passes Test
Titrable Acid 0.0009 meq/g Tracemetals Aluminum (Al) Max. 0.5 ppm Barium (Ba) Max. 0.1 ppm Boron (B) Max. 0.02 ppm Cadmium (Cd) Max. 0.05 ppm Calcium (Ca) Max. 0.5 ppm Chromium (Cr) Max. 0.02 ppm Cobalt (Co) Max. 0.02 ppm Copper (Cu) Max. 0.02 ppm Iron (Fe) Max. 0.1 ppm Lead (Pb) Max. 0.1 ppm Magnesium (Mg) Max. 0.1 ppm Manganese (Mn) Max. 0.02 ppm Nickel (Ni) Max. 0.02 ppm Tin (Sn) Max. 0.1 ppm Zinc (Zn) Max. 0.1 ppm
packaging product number Unit size case size ER2540-065 1L 1L Amber Glass ER2540-002 1L 6x1L Amber Glass ER2540-048 4L 4L Amber Glass ER2540-001 4L 4x4L Amber Glass
anhydrosolv eh3857
Packaged under Nitrogen in Septum Sealed Bottle
specifications Assay Min. 99.8 % Residue after Evaporation Max. 5 ppm Water Max. 50 ppm
packaging product number Unit size case size EH3857-174 100ml 100ml Amber Glass with Septum Seal EH3857-100 100ml 6x100ml Amber Glass with Septum Seal EH3857-150 1L 6x1L Amber Glass with Septum Seal EH3857-041 1L 1L Amber Glass with Septum Seal
gc eg2816
For Organic Residue Analysis Packaged under Nitrogen. Submicron filtered.
specifications Assay Min. 99.9 % Color (APHA) Max. 10 GC-ECD Responsive Residue (as Heptachlor Epoxide) Max. 10 ppt GC-FID Responsive Residue (as 2-Octanol) Max. 5 ppb Residue after Evaporation Max. 1 ppm Titrable Acid Max. 0.0009 meq/g Water Max. 0.05 %
packaging product number Unit size case size EG2816-065 1L 1L Amber Glass EG2816-002 1L 6x1L Amber Glass EG2816-048 4L 4L Amber Glass EG2816-001 4L 4x4L Amber Glass
hplc/acs es3335
For Use in Liquid Chromatography and Spectrophotometry Packaged under Nitrogen. Submicron filtered.
specifications Assay Min. 99.8 % Color (APHA) Max. 10 Residue after Evaporation Max. 5 ppm Substances Darkened by H
2SO
4 Passes Test
Titrable Acid Max. 0.0009 meq/g Water Max. 0.05 % Optical Absorbance at 255 nm Max. 1.00 260 nm Max. 0.12 280 nm Max. 0.05 300 nm Max. 0.02 330 nm Max. 0.01 350 nm Max. 0.01 packaging product number Unit size case size ES3335-008 204L 204L Metal Drum
hplc/spectro es1512
For Use in Liquid Chromatography and Spectrophotometry Packaged under Nitrogen. Submicron filtered. Also meets ACS specifications.
specifications Assay Min. 99.8 % Color (APHA) Max. 10 Residue after Evaporation Max. 3 ppm Substances Darkened by H
2SO
4 Passes Test
Titrable Acid Max. 0.0009 meq/g Water Max. 0.05 % Optical Absorbance at 255 nm Max. 1.00 260 nm Max. 0.15 280 nm Max. 0.05
95 300 nm Max. 0.01 330 nm Max. 0.01 350 nm Max. 0.005
packaging product number Unit size case size ES1512-065 1L 1L Amber Glass ES1512-002 1L 6x1L Amber Glass ES1512-073 4L 4L PVC Coated Amber Glass ES1512-048 4L 4L Amber Glass ES1512-006 4L 4x4L PVC Coated Amber Glass ES1512-001 4L 4x4L Amber Glass
nf eU1510
Meets NF Requirements
specifications Assay 99.0 - 100.5 % Identification Passes Test Specific Gravity at 25°/25°C 0.894 - 0.898 Acidity Passes Test Readily Carbonizable Substances Passes Test Limit of Nonvolatile Residue Max. 0.02 % Methyl Compounds Passes Test Chromatographic Purity Min. 99.5 % Organic Volatile Impurities Conforms to USP/NF
packaging product number Unit size case size EU1510-048 4L 4L Amber Glass EU1510-001 4L 4x4L Amber Glass
ETHYl ACETOACETATE(ACETOACETIC ESTER)
CH3COCH
2CO
2C
2H
5 FW 130.14 CAS 141-97-9
MP -43°C BP 181°C D 1.021 Merck Index 12,3804 FP 84°C NFPA 2-2-0 Storage Code: RED
certified er0516
specifications Assay Min. 99.0 %
packaging product number Unit size case size ER0516-065 1L 1L Amber Glass ER0516-002 1L 6x1L Amber Glass ER0516-048 4L 4L Amber Glass ER0516-001 4L 4x4L Amber Glass
ETHYl AlCOHOlSee Alcohol, Anhydrous
ETHYl AlCOHOl, AbSOlUTE, 200 PROOF (ETHANOL, UNDENATURED)
C2H
5OH FW 46.07 CAS 64-17-5
MP -130°C BP 78°C D 0.785 Merck Index 13,3795 FP 16°C NFPA 1-3-0 Storage Code: RED IMO Ethanol, 3, UN1170, PG II
acs/Usp er0515
Available for international shipment only. Inquire for pricing.
specifications Acetone and Isopropyl Alcohol Passes Test Acidity or Alkalinity Passes Test Assay (by Volume) Min. 99.5 % Clarity of Solution Passes Test Color (APHA) Max. 10 Color of Solution Passes Test Identification Test A Passes Test Identification Test B Passes Test Limit of Nonvolatile Residue Max. 2.5 mg Methyl Alcohol Max. 0.1 % Nonvolatile Residue Max. 0.001 % Optical Absorbance at 240 nm Max. 0.40 250 nm Max. 0.30 260 nm Max. 0.30 270 nm Max. 0.10 340 nm Max. 0.10 235 - 340 nm Passes Test Proof @ 20ºC Min. 199.0 Solubility in Water Passes Test Specific Gravity at 15.56ºC Max. 0.7962 Specific Gravity at 20ºC/20ºC 0.7900 and 0.7932 Substances Darkened by Sulfuric Acid Passes Test Substances Reducing Permanganate Passes Test Titrable Acid Max. 0.0005 meq/gTitrable Base Max. 0.0002 meq/gUV Absorbance Purged of O
2 Passes Test
Volatile impurities: Benzene Max. 2 ppmVolatile impurities: Methanol Max. 100 ppmVolatile impurities: Sum of Acetal and Acetaldehyde Max. 10 ppmVolatile impurities: Sum of All Secondary Peaks Max. 300 ppmWater Max. 0.2 %
packaging product number Unit size case size ER0515-065 1L 1L Amber Glass ER0515-002 1L 6x1L Amber Glass ER0515-048 4L 4L Amber Glass ER0515-001 4L 4x4L Amber Glass
Eth-
96ETHYl bENzOATE C
6H
5CO
2C
2H
5 FW 150.18 CAS 93-89-0
MP -34°C BP 212°C D 1.051 Merck Index 13,3802 FP 84°C NFPA 1-1-0 Storage Code: GREEN
certified er0525
specifications Assay Min. 99.0 %
packaging product number Unit size case size ER0525-065 1L 1L Amber Glass ER0525-002 1L 6x1L Amber Glass ER0525-048 4L 4L Amber Glass ER0525-001 4L 4x4L Amber Glass
ETHYl ETHER ANHYDROUS(DIETHYL ETHER; ETHER)
(C2H
5)
2O FW 74.12 CAS 60-29-7
MP -116°C BP 34.6°C D 0.715 Merck Index 13,3840 FP -40°C NFPA 1-4-1 Storage Code: RED IMO Diethyl Ether, 3, UN1155, PG I
physical properties Boiling Point (760mm) 34.6°C Density (g/ml) at 25°C 0.715 Dielectric Constant at 20°C 4.33 Elutropic Value (Silica) 0.29 Refractive Index (n20°/D) 1.353 Viscosity (cps) at 20°C 0.23
absolv ea1530
For Use in Liquid Chromatography, Spectrophotometry, and for Organic Residue Analysis Packaged under Nitrogen.
specifications Assay Min. 99.9 % Color (APHA) Max. 10 Fluorescence Background (as Quinine Sulfate) Max. 1 ppb GC-ECD Responsive Residue (as Heptachlor Epoxide) Max. 10 ppt Peroxides (as Hydrogen Peroxide, at time of packaging) Max. 5 ppm Residue after Evaporation Max. 1 ppm Water Max. 0.02 % Optical Absorbance at 215 nm Max. 1.00 230 nm Max. 0.30 254 nm Max. 0.08 280 nm Max. 0.01 300 nm Max. 0.005
packaging product number Unit size case size EA1530-065 1L 1L Amber Glass EA1530-002 1L 6x1L Amber Glass EA1530-048 4L 4L Amber Glass EA1530-001 4L 4x4L Amber Glass
acs er0550
Meets reagent specifications for testing USP/NF monographs.
specifications Alcohol (C
2H
5OH) Passes Test
Assay Min. 99.0 % Carbonyl Compounds (as Formaldehyde) Max. 0.001 % Color (APHA) Max. 10 Peroxides (as Hydrogen Peroxide, at time of packaging) Max. 1 ppm Stabilizer (BHT, w/w %) Report Only Residue after Evaporation Max. 0.001 % Titrable Acid Max. 0.0002 meq/g Water Max. 0.03 %
packaging product number Unit size case size ER0550-067 12.5Kg 20L Metal Pail ER0550-065 1L 1L Amber Glass ER0550-002 1L 6x1L Amber Glass ER0550-008 204L 204L Metal Drum ER0550-073 4L 4L PVC Coated Amber Glass ER0550-048 4L 4L Amber Glass ER0550-006 4L 4x4L PVC Coated Amber Glass ER0550-001 4L 4x4L Amber Glass
acs plUs er2543
Meets reagent specifications for testing USP/NF monographs.
specifications Alcohol (CH
3CH
2OH) Passes Test
Carbonyl (as HCHO) Max. 0.001 % Assay Min. 99.0 % Residue after Evaporation Max. 0.001 % Water Max. 0.03 % Color (APHA) Max. 10 Titrable Acid Max. 0.0002 meq/g Peroxide (as H
2O
2) Max. 1 ppm
Preservative (BHT w/w) Min. 7 ppm Tracemetals Aluminum (Al) Max. 0.5 ppm Barium (Ba) Max. 0.1 ppm Boron (B) Max. 0.02 ppm Cadmium (Cd) Max. 0.05 ppm Calcium (Ca) Max. 0.5 ppm Chromium (Cr) Max. 0.02 ppm Cobalt (Co) Max. 0.02 ppm Copper (Cu) Max. 0.02 ppm
97 Iron (Fe) Max. 0.1 ppm Lead (Pb) Max. 0.1 ppm Magnesium (Mg) Max. 0.1 ppm Manganese (Mn) Max. 0.02 ppm Nickel (Ni) Max. 0.02 ppm Tin (Sn) Max. 0.1 ppm Zinc (Zn) Max. 0.1 ppm
packaging product number Unit size case size ER2543-065 1L 1L Amber Glass ER2543-002 1L 6x1L Amber Glass ER2543-048 4L 4L Amber Glass ER2543-001 4L 4x4L Amber Glass
anhydrosolv eh3860
Packaged under Nitrogen in Septum Sealed Bottle
specifications Assay Min. 99.8 % Stabilizer (BHT, w/w) Min. 1 ppm Residue after Evaporation Max. 3 ppm Water Max. 50 ppm
packaging product number Unit size case size EH3860-174 100ml 100ml Amber Glass with Septum Seal EH3860-100 100ml 6x100ml Amber Glass with Septum Seal EH3860-150 1L 6x1L Amber Glass with Septum Seal EH3860-041 1L 1L Amber Glass with Septum Seal
gc eg1532
For Organic Residue Analysis Packaged under Nitrogen. (Inhibitor-Free)
specifications Assay Min. 99.8 % Residue after Evaporation Max. 3 ppm Water Max. 0.03 % Color (APHA) Max. 10 GC-ECD Halogenated Residue (as Heptachlor Epoxide) Max. 10 ppt GC-FID Responsive Residue (as 2-Octanol) Max. 5 ppb Peroxides (as Hydrogen Peroxide, at time of packaging) Max. 5 ppm
packaging product number Unit size case size EG1532-065 1L 1L Amber Glass EG1532-002 1L 6x1L Amber Glass EG1532-048 4L 4L Amber Glass EG1532-001 4L 4x4L Amber Glass
hplc/spectro es1531
For Use in Liquid Chromatography and Spectrophotometry Packaged under Nitrogen. Submicron filtered. (Inhibitor-Free)
specifications Assay Min. 99.9 % Color (APHA) Max. 10 Peroxides (as Hydrogen Peroxide, at time of packaging) Max. 5 ppm Residue after Evaporation Max. 5 ppm Water Max. 0.03 % Optical Absorbance at 215 nm Max. 1.00 230 nm Max. 0.30 254 nm Max. 0.08 280 nm Max. 0.01 300 nm Max. 0.005
packaging product number Unit size case size ES1531-065 1L 1L Amber Glass ES1531-002 1L 6x1L Amber Glass ES1531-073 4L 4L PVC Coated Amber Glass ES1531-048 4L 4L Amber Glass ES1531-006 4L 4x4L PVC Coated Amber Glass ES1531-001 4L 4x4L Amber Glass
ETHYl ETHER (ETHANOl STAbIlIzED)(DIETHYL ETHER; ETHER)
(C2H
5)
2O FW 74.12 CAS 60-29-7
MP -116°C BP 34.6°C D 0.715 Merck Index 13,3840 FP -40°C NFPA 1-4-1 Storage Code: RED IMO Diethyl Ether, 3, UN1155, PG I
physical properties Boiling Point (760mm) 34.6°C Density (g/ml) at 25°C 0.715 Dielectric Constant at 20°C 4.33 Elutropic Value (Silica) 0.29 Refractive Index (n20°/D) 1.353 Viscosity (cps) at 20°C 0.23
Eth-
98ETHYl ETHER (ETHANOl STAbIlIzED) (CONTINUED)
absolv ea1535
For Use in Liquid Chromatography, Spectrophotometry, and for Organic Residue Analysis Packaged under Nitrogen.
specifications Assay Min. 99.9 % Color (APHA) Max. 10 Fluorescence Background (as Quinine Sulfate) Max. 1 ppb GC-ECD Responsive Residue (as Heptachlor Epoxide) Max. 10 ppt Peroxides (as Hydrogen Peroxide, at time of packaging) Max. 5 ppm Residue after Evaporation Max. 1 ppm Stabilizer (Ethanol, v/v %) 1.5 - 2.5 Water Max. 0.03 % Optical Absorbance at 215 nm Max. 1.00 230 nm Max. 0.30 254 nm Max. 0.08 280 nm Max. 0.01 300 nm Max. 0.005
packaging product number Unit size case size EA1535-065 1L 1L Amber Glass EA1535-002 1L 6x1L Amber Glass EA1535-048 4L 4L Amber Glass EA1535-001 4L 4x4L Amber Glass
acs er0551
Meets reagent specifications for testing USP/NF monographs.
specifications Assay Min. 98.0 % Carbonyl Compounds (as Formaldehyde) Max. 0.001 % Color (APHA) Max. 10 Peroxides (as Hydrogen Peroxide, at time of packaging) Max. 1 ppm Residue after Evaporation Max. 0.001 % Stabilizer (Ethanol, v/v %) 1.5 - 3.5 Titrable Acid Max. 0.0002 meq/g Water Max. 0.5 %
packaging product number Unit size case size ER0551-067 12.5Kg 20L Metal Pail ER0551-065 1L 1L Amber Glass ER0551-002 1L 6x1L Amber Glass ER0551-008 204L 204L Metal Drum ER0551-073 4L 4L PVC Coated Amber Glass
ER0551-048 4L 4L Amber Glass ER0551-006 4L 4x4L PVC Coated Amber Glass ER0551-001 4L 4x4L Amber Glass
gc eg1537
For Organic Residue Analysis. Packaged under Nitrogen.
specifications Stabilizer (Ethanol, v/v %) 1.5 - 2.5 Assay Min. 99.5 % Residue after Evaporation Max. 3 ppm Water Max. 0.08 % Color (APHA) Max. 10 GC-ECD Halogenated Residue (as Heptachlor Epoxide) Max. 10 ppt GC-FID Responsive Residue (as 2-Octanol) Max. 5 ppb Peroxides (as Hydrogen Peroxide, at time of packaging) Max. 5 ppm
packaging product number Unit size case size EG1537-065 1L 1L Amber Glass EG1537-002 1L 6x1L Amber Glass EG1537-048 4L 4L Amber Glass EG1537-001 4L 4x4L Amber Glass
hplc/spectro es1536
For Use in Liquid Chromatography and Spectrophotometry Packaged under Nitrogen. Submicron filtered.
specifications Assay (excluding Ethanol) Min. 99.9 % Color (APHA) Max. 10 Peroxides (as Hydrogen Peroxide, at time of packaging) Max. 5 ppm Residue after Evaporation Max. 5 ppm Stabilizer (Ethanol, v/v %) 1.5 - 2.5 Water Max. 0.03 % Optical Absorbance at 215 nm Max. 1.00 230 nm Max. 0.30 254 nm Max. 0.08 280 nm Max. 0.01 300 nm Max. 0.005
packaging product number Unit size case size ES1536-065 1L 1L Amber Glass ES1536-002 1L 6x1L Amber Glass ES1536-073 4L 4L PVC Coated Amber Glass ES1536-048 4L 4L Amber Glass ES1536-006 4L 4x4L PVC Coated Amber Glass ES1536-001 4L 4x4L Amber Glass
99ETHYl lACTATE CH
3CH(OH)CO
2C
2H
5 FW 118.13 CAS 687-47-8
MP -26°C BP 154°C D 1.042 Merck Index 13,3773 FP 48°C NFPA 2-2-0 Storage Code: RED IMO Ethyl Lactate, 3, UN1192, PG III
certified er0560
specifications Assay Min. 99.0 %
packaging product number Unit size case size ER0560-065 1L 1L Amber Glass ER0560-002 1L 6x1L Amber Glass ER0560-048 4L 4L Amber Glass ER0560-001 4L 4x4L Amber Glass
ETHYl METHYl KETONESee Methyl Ethyl Ketone
ETHYl OxIDESee Ethyl Ether
ETHYl PHTHAlATESee Diethyl Phthalate
ETHYlbENzENE C
6H
5C
2H
5 FW 106.17 CAS 100-41-4
MP -95°C BP 136°C D 0.867 Merck Index 13,3801 FP 22°C NFPA 2-3-0 Storage Code: RED IMO Ethylbenzene, 3, UN1175, PG II
certified er0524
specifications Assay Min. 99.0 % Color (APHA) Max. 20 Water Max. 0.1 %
packaging product number Unit size case size ER0524-065 1L 1L Amber Glass ER0524-002 1L 6x1L Amber Glass ER0524-048 4L 4L Amber Glass ER0524-001 4L 4x4L Amber Glass
ETHYlENE CHlORIDESee 1,2-Dichloroethane
ETHYlENE DICHlORIDESee 1,2-Dichloroethane
ETHYlENE GlYCOl(1,2-ETHANEDIOL)
HOCH2CH
2OH FW 62.07 CAS 107-21-1
MP -13°C BP 196-198°C D 1.113 Merck Index 13,3832 FP 110°C NFPA 1-1-0 Storage Code: GREEN
physical properties Boiling Range (760mm) 196-198°C Density (g/ml) at 25°C 1.113 Refractive Index (n20°/D) 1.431
certified er0541
specifications Acidity (as Acetic Acid) Max. 0.01 % Assay Min. 99 % Color (APHA) Max. 10 Residue after Ignition Max. 0.005 % Water Max. 0.2 %
packaging product number Unit size case size ER0541-065 1L 1L Amber Glass ER0541-002 1L 6x1L Amber Glass ER0541-008 204L 204L Metal Drum ER0541-007 20L 20L Metal Pail ER0541-048 4L 4L Amber Glass ER0541-001 4L 4x4L Amber Glass
spectro es1520
For Use in Spectrophotometry
specifications Assay Min. 99.0 % Optical Absorbance at 210 nm Max. 1.00 220 nm Max. 0.30 250 nm Max. 0.10 300 nm Max. 0.05
packaging product number Unit size case size ES1520-065 1L 1L Amber Glass ES1520-002 1L 6x1L Amber Glass ES1520-048 4L 4L Amber Glass ES1520-001 4L 4x4L Amber Glass
Eth-
100ETHYlENE GlYCOl DIMETHYl ETHER (1,2-DIMETHOxYETHANE, MONOGLYME)
CH3OCH
2CH
2OCH
3 FW 90.12 CAS 110-71-4
MP -58°C BP 85°C D 0.867 Merck Index 13,3251 FP 0°C NFPA 2-2-0 Storage Code: RED IMO 1,2-Dimethoxyethane, 3, UN2252, PG II
physical properties Boiling Point (760mm) 85°C Density (g/ml) at 25°C 0.867 Refractive Index (n20°/D) 1.3791
anhydrosolv eh3866
Packaged under Nitrogen in Septum Sealed Bottle
specifications Assay Min. 99.5 % Residue after Evaporation Max. 5 ppm Water Max. 30 ppm
packaging product number Unit size case size EH3866-174 100ml 100ml Amber Glass with Septum Seal EH3866-100 100ml 6x100ml Amber Glass with Septum Seal EH3866-150 1L 6x1L Amber Glass with Septum Seal EH3866-041 1L 1L Amber Glass with Septum Seal
certified er4084
specifications Assay Min. 99.0 % Water Max. 0.2 %
packaging product number Unit size case size ER4084-065 1L 1L Amber Glass ER4084-002 1L 6x1L Amber Glass ER4084-048 4L 4L Amber Glass ER4084-001 4L 4x4L Amber Glass
hplc/spectro es4083
For Use in Liquid Chromatography and Spectrophotometry Packaged under Nitrogen. Submicron filtered.
specifications Assay Min. 99.9 % Residue after Evaporation Max. 5 ppm Water Max. 0.05 % Optical Absorbance at 220 nm Max. 1.00 250 nm Max. 0.20 300 nm Max. 0.03
350 nm Max. 0.01 400 nm Max. 0.01
packaging product number Unit size case size ES4083-065 1L 1L Amber Glass ES4083-002 1L 6x1L Amber Glass ES4083-048 4L 4L Amber Glass ES4083-001 4L 4x4L Amber Glass
ETHYlENE GlYCOl MONObUTYl ETHER(BUTYL CELLOSOLVE; 2-BUTOxYETHANOL)
CH3(CH
2)
3OCH
2CH
2OH FW 118.18 CAS 111-76-2
MP -75°C BP 171°C/743 MM D 0.900 Merck Index 13,1558 FP 60°C NFPA 2-2-0 Storage Code: RED
certified er0542
specifications Assay Min. 99.0 %
packaging product number Unit size case size ER0542-065 1L 1L Amber Glass ER0542-002 1L 6x1L Amber Glass ER0542-048 4L 4L Amber Glass ER0542-001 4L 4x4L Amber Glass
ETHYlENE GlYCOl MONObUTYl ETHER ACETATE(BUTYL CELLOSOLVE ACETATE; 2-BUTOxYETHYL ACETATE) CH
3CO
2CH
2CH
2O(CH
2)
3CH
3
FW 160.22 CAS 112-07-2 BP 192°C D 0.942 FP 76°C NFPA 1-2-0 Storage Code: RED
certified er4085
specifications Assay Min. 99.0 %
packaging product number Unit size case size ER4085-065 1L 1L Amber Glass ER4085-002 1L 6x1L Amber Glass ER4085-048 4L 4L Amber Glass ER4085-001 4L 4x4L Amber Glass
ETHYlENE GlYCOl MONOETHYl ETHER(CELLOSOLVE; 2-ETHOxYETHANOL) C
2H
5OCH
2CH
2OH FW 90.12 CAS 110-80-5
MP -90°C BP 135°C D 0.930
101 Merck Index 13,3786 FP 44°C NFPA 2-2-0 Storage Code: RED IMO Ethylene Glycol Monoethyl Ether, 3, UN1171, PG III
physical properties Boiling Point (760mm) 135°C Density (g/ml) at 25°C 0.93 Refractive Index (n20°/D) 1.407
certified er0543
specifications Acidity (as Acetic Acid) Max. 0.01 % Assay Min. 99.0 % Color (APHA) Max. 10 Residue after Evaporation Max. 0.005 % Water Max. 0.1 %
packaging product number Unit size case size ER0543-065 1L 1L Amber Glass ER0543-002 1L 6x1L Amber Glass ER0543-007 20L 20L Metal Pail ER0543-048 4L 4L Amber Glass ER0543-001 4L 4x4L Amber Glass
spectro es0540
For Use in Liquid Chromatography and Spectrophotometry Packaged under Nitrogen. Submicron filtered.
specifications Assay Min. 99.0 % Residue after Evaporation Max. 0.001 % Water Max. 0.08 % Optical Absorbance at 215 nm Max. 1.00 225 nm Max. 0.50 250 nm Max. 0.20 305 nm Max. 0.01
packaging product number Unit size case size ES0540-065 1L 1L Amber Glass ES0540-002 1L 6x1L Amber Glass ES0540-048 4L 4L Amber Glass ES0540-001 4L 4x4L Amber Glass
ETHYlENE GlYCOl MONOETHYl ETHER ACETATE(CELLOSOLVE ACETATE; 2-ETHOxYETHYL ACETATE)
CH3CO
2CH
2CH
2OC
2H
5 FW 132.16 CAS 111-15-9
MP -61°C BP 156°C D 0.975 Merck Index 13,3787 FP 57°C NFPA 1-2-0 Storage Code: RED IMO Ethylene Glycol Monoethyl Ether Acetate, 3, UN1172, PG III
certified er0544
specifications Assay Min. 99.0 %
packaging product number Unit size case size ER0544-065 1L 1L Amber Glass ER0544-002 1L 6x1L Amber Glass ER0544-048 4L 4L Amber Glass ER0544-001 4L 4x4L Amber Glass
ETHYlENE GlYCOl MONOMETHYl ETHERSee also 2-Methoxyethanol
ETHYlENE GlYCOl MONOMETHYl ETHER(2-METHOxYETHANOL) CH
3OCH
2CH
2OH FW 76.10 CAS 109-86-4
MP -85°C BP 124-125°C D 0.965 Merck Index 13,6066 FP 46°C NFPA 2-2-0 Storage Code: RED IMO Ethylene Glycol Monomethyl Ether, 3, UN1188, PG III
physical properties Boiling Range (760mm) 124-125°C Density (g/ml) at 25°C 0.965 Dielectric Constant at 20°C 16.93 Refractive Index (n20°/D) 1.402 Viscosity (cps) at 20°C 1.72 1.72
acs er0545
specifications Assay Min. 99.3 % Color (APHA) Max. 10 Titrable Acid Max. 0.002 meq/g Water Max. 0.1 %
packaging product number Unit size case size ER0545-065 1L 1L Amber Glass ER0545-002 1L 6x1L Amber Glass ER0545-007 20L 20L Metal Pail ER0545-048 4L 4L Amber Glass ER0545-001 4L 4x4L Amber Glass
Eth-
102ETHYlENE GlYCOl MONOMETHYl ETHER (CONTINUED)
hplc/spectro es1911
For Use in Liquid Chromatography and Spectrophotometry Packaged under Nitrogen. Submicron filtered.
specifications Assay Min. 99.9 % Peroxides (as Isopropyl Peroxide, at time of packaging) Max. 0.0002 % Residue after Evaporation Max. 5 ppm Water Max. 0.05 % Optical Absorbance at 210 nm Max. 1.00 220 nm Max. 0.55 240 nm Max. 0.25 250 nm Max. 0.15 270 nm Max. 0.05 300 nm Max. 0.005 400 nm
packaging product number Unit size case size ES1911-065 1L 1L Amber Glass ES1911-002 1L 6x1L Amber Glass ES1911-048 4L 4L Amber Glass ES1911-001 4L 4x4L Amber Glass
ETHYlENE GlYCOl MONOMETHYl ETHER ACETATE(2-METHOxYETHYL ACETATE) CH
3CO
2CH
2CH
2OCH
3 FW 118.13 CAS 110-49-6
MP -65°C BP 145°C D 1.009 Merck Index 13,6067 FP 43°C NFPA 2-2-0 Storage Code: RED IMO Ethylene Glycol Monomethyl Ether Acetate, 3, UN1189, PG III
physical properties Boiling Point (760mm) 145°C Density (g/ml) at 25°C 1.009 Refractive Index (n20°/D) 1.402
hplc/spectro es1917
For Use in Liquid Chromatography and Spectrophotometry Packaged under Nitrogen. Submicron filtered.
specifications Assay Min. 99.0 % Residue after Evaporation Max. 5 ppm Water Max. 0.05 % Optical Absorbance at 254 nm Max. 1.00 275 nm Max. 0.15 300 nm Max. 0.05
350 nm Max. 0.01 400 nm Max. 0.01
packaging product number Unit size case size ES1917-065 1L 1L Amber Glass ES1917-002 1L 6x1L Amber Glass ES1917-048 4L 4L Amber Glass ES1917-001 4L 4x4L Amber Glass
ETHYlENE GlYCOl MONOPHENYl ETHER 99%(2-PHENOxYETHANOL)
C6H
5OCH
2CH
2OH FW 138.17 CAS 122-99-6
BP 247°C D 1.102 Merck Index 13,7341 FP 110°C NFPA 2-1-1 Storage Code: GREEN
certified er0546
Stabilizer May contain up to 10% of Diethylene Glycol Monophenyl Ether
specifications Assay Min. 99.0 % Free Phenol Content Max. 0.1 %
packaging product number Unit size case size ER0546-065 1L 1L Amber Glass ER0546-002 1L 6x1L Amber Glass ER0546-048 4L 4L Amber Glass ER0546-001 4L 4x4L Amber Glass
ETHYlENEDIAMINE ANHYDROUS(1,2-DIAMINOETHANE, 1,2-ETHANEDIAMINE)
H2NCH
2CH
2NH
2 FW 60.10 CAS 107-15-3
MP 8.5°C BP 118°C D 0.899 Merck Index 13,3829 FP 33°C NFPA 3-2-0 Storage Code: RED IMO Ethylenediamine, 8 (3), UN1604, PG II
certified er0527
specifications Assay Min. 99.0 % Water Max. 0.5 %
packaging product number Unit size case size ER0527-065 1L 1L Amber Glass ER0527-002 1L 6x1L Amber Glass ER0527-048 4L 4L Amber Glass ER0527-001 4L 4x4L Amber Glass
103FISCHER REAGENTSee Karl Fischer Reagent
FlORISIl (60-100 MESH) MGO:SIO
2 (15:85) CAS 1343-88-0
Merck Index 13,5569 NFPA 1-0-0 Storage Code: GREEN
physical properties Surface Area (BET) 245 m2/g Bulk Density (g/cc) 0.5
certified fr0614
Activated at 675°C. For use in Chromatographic Cleanup of Pesticide Residues
specifications Mesh size (#60 to #100) Min. 80 %
packaging product number Unit size case size FR0614-061 2.5Kg 2.5Kg Poly Bottle FR0614-028 500g 500g Amber Glass
FORMAlDEHYDE 37% HCHO FW 30.03 CAS 50-00-0 D 1.083 Merck Index 13,4259 FP 56°C NFPA 3-2-0 Storage Code: RED Cancer Suspect Agent IMO Formaldehyde Solution, Flammable, 3 (8), UN1198, PG III
acs fr0621
(Stabilized with 10-15% Methyl Alcohol)
specifications Assay (Formaldehyde) 36.5 - 38.0 % Chloride (Cl) Max. 5 ppm Color (APHA) Max. 10 Heavy Metals (as Pb) Max. 5 ppm Iron (Fe) Max. 5 ppm Residue after Ignition Max. 0.005 % Sulfate Max. 0.002 % Titrable Acid Max. 0.006 meq/g
packaging product number Unit size case size FR0621-064 1L 1L Poly Bottle FR0621-015 1L 6x1L Poly Bottle FR0621-037 204L 204L Poly Drum FR0621-031 20L 20L Poly Pail FR0621-066 4L 4L Poly Bottle FR0621-012 4L 4x4L Poly Bottle
histological fr0622
For use in Tissue Sampling and Processing (Stabilized with 10-15% Methyl Alcohol)
specifications Assay (Formaldehyde) 36.5 - 38.0 % Color (APHA) Max. 10
packaging product number Unit size case size FR0622-031 20L 20L Poly Pail FR0622-066 4L 4L Poly Bottle FR0622-012 4L 4x4L Poly Bottle
FORMAlINE NEUTRAl bUFFERED 10% W/v HCHO FW 30.03 CAS 50-00-0 Merck Index 13,4259 NFPA 3-2-0 Storage Code: BLUE
certified fr0625
Buffered with phosphate in accordance with A.F.I.P. Manual of Histology. Suitable for Histological Applications.
specifications Formaldehyde 38 - 42 g/L pH at 25ºC 6.0 - 8.0
packaging product number Unit size case size FR0625-031 20L 20L Poly Pail FR0625-066 4L 4L Poly Bottle FR0625-012 4L 4x4L Poly Bottle
FORMAMIDE HCONH
2 FW 45.04 CAS 75-12-7
MP 2-3°C BP 210°C D 1.134 Merck Index 13,4261 FP 154°C NFPA 2-1-0 Storage Code: GREEN
acs fr0626
Meets reagent specifications for testing USP/NF monographs.
specifications Assay Min. 99.5 % Color (APHA) Max. 10 Freezing Point 2.0 - 3.0˚C
packaging product number Unit size case size FR0626-065 1L 1L Amber Glass FR0626-002 1L 6x1L Amber Glass FR0626-048 4L 4L Amber Glass FR0626-001 4L 4x4L Amber Glass
Eth-For
104FORMIC ACID 88% HCO
2H FW 46.03 CAS 64-18-6
MP 8.2-8.4°C BP 100-101°C D 1.220 Merck Index 13,4265 FP 68°C NFPA 3-2-0 Storage Code: WHITE IMO Formic Acid, 8, UN1779, PG II
acs fr0628
Meets reagent specifications for testing USP/NF monographs.
specifications Acetic Acid Max. 0.4 % Ammonium Max. 0.005 % Assay Min. 88.0 % Chloride (Cl) Max. 0.001 % Color (APHA) Max. 15 Dilution Test Passes Test Heavy Metals (as Pb) Max. 5 ppm Iron (Fe) Max. 5 ppm Residue after Evaporation Max. 0.002 % Sulfate Max. 0.002 % Sulfite Passes Test
packaging product number Unit size case size FR0628-065 1L 1L Amber Glass FR0628-002 1L 6x1L Amber Glass FR0628-048 4L 4L Amber Glass FR0628-001 4L 4x4L Amber Glass
FORMIC ACID 96% HCO
2H FW 46.03 CAS 64-18-6
MP 8.2-8.4°C BP 100-101°C D 1.220 Merck Index 13,4265 FP 68°C NFPA 3-2-0 Storage Code: WHITE IMO Formic Acid, 8, UN1779, PG II
acs fr0629
Meets reagent specifications for testing USP/NF monographs.
specifications Acetic Acid Max. 0.4 % Ammonium Max. 0.005 % Assay Min. 96.0 % Chloride (Cl) Max. 0.001 % Color (APHA) Max. 15 Dilution Test Passes Test Heavy Metals (as Pb) Max. 0.001 % Iron (Fe) Max. 0.001 % Residue after Evaporation Max. 0.003 % Sulfate Max. 0.003 % Sulfite Passes Test
packaging product number Unit size case size FR0629-065 1L 1L Amber Glass FR0629-002 1L 6x1L Amber Glass
FR0629-048 4L 4L Amber Glass FR0629-001 4L 4x4L Amber Glass
hplc fs0630
For Use in High Performance Liquid Chromatography
specifications Acetic Acid Max. 0.4 % Ammonium Max. 0.005 % Assay Min. 96.0 % Chloride (Cl) Max. 0.001 % Color (APHA) Max. 10 Dilution Test Passes Test Heavy Metals (as Pb) Max. 0.001 % Iron (Fe) Max. 0.001 % Residue after Evaporation Max. 0.003 % Sulfate Max. 0.003 % Sulfite Passes Test Optical Absorbance at 260 nm Max. 1.00 270 nm Max. 0.06 280 nm Max. 0.04 300 nm Max. 0.02 350 nm Max. 0.01 400 nm Max. 0.01
packaging product number Unit size case size FS0630-053 500ml 500ml Amber Glass FS0630-013 500ml 6x500ml Amber Glass
FURAN C
4H
4O FW 68.08 CAS 110-00-9
BP 32°C/758mm D 0.936 Merck Index 13,4317 FP -35°C NFPA 1-4-1 Storage Code: RED Cancer Suspect Agent
certified fr0650
specifications Assay Min. 99.0 % Stabilizer (BHT, w/w %) 0.025 - 0.040
packaging product number Unit size case size FR0650-065 1L 1L Amber Glass FR0650-002 1L 6x1L Amber Glass FR0650-048 4L 4L Amber Glass FR0650-001 4L 4x4L Amber Glass
GlUTARAlDEHYDE 25% AqUEOUS SOlUTION(GLUTARIC DIALDEHYDE) HCO(CH
2)
3CHO FW 100.12 CAS 111-30-8
MP -6°C BP 101°C D 1.062 Merck Index 13,4485 NFPA 3-0-0 Storage Code: WHITE
105 IMO Corrosive Liquid, Acidic, Organic N.O.S. (Glutaraldehyde), UN3265, PG II
certified gr0720
specifications Assay (Glutaraldehyde) 23.5 - 24.5 % pH at 25ºC Max. 4.5
packaging product number Unit size case size GR0720-065 1L 1L Amber Glass GR0720-002 1L 6x1L Amber Glass GR0720-048 4L 4L Amber Glass GR0720-001 4L 4x4L Amber Glass
GlUTARAlDEHYDE 50% AqUEOUS SOlUTION HCO(CH
2)
3CHO FW 100.12 CAS 111-30-8
MP -6°C BP 101°C D 1.062 Merck Index 13,4485 NFPA 3-0-0 Storage Code: WHITE
certified gr0722
specifications Assay (Glutaraldehyde) 50.0 - 52.0 % pH at 25ºC Max. 4.5
packaging product number Unit size case size GR0722-065 1L 1L Amber Glass GR0722-002 1L 6x1L Amber Glass GR0722-048 4L 4L Amber Glass GR0722-001 4L 4x4L Amber Glass
GlUTARIC DIAlDEHYDESee Glutaraldehyde
GlYCERINSee Glycerol
GlYCEROl(GLYCERIN)
HOCH2CH(OH)CH
2OH FW 92.09 CAS 56-81-5
MP 20°C BP 182°C/20mm D 1.261 Merck Index 13,4497 FP 160°C NFPA 1-1-0 Storage Code: GREEN
physical properties Boiling Point 182°C/20mm Density (g/ml) at 20°C 1.261 Refractive Index (n20°/D) 1.474
acs gr0725
Meets reagent specifications for testing USP/NF monographs.
specifications Acrolin and Glucose Passes Test Assay Min. 99.5 % Chlorinated Compounds (as Cl) Max. 0.003 % Color (APHA) Max. 10 Fatty Acid Esters (as Butyric Acid) Max. 0.05 % Heavy Metals (as Pb) Max. 2 ppm Neutrality Passes Test Residue after Ignition Max. 0.005 % Substances Darkened by Sulfuric Acid Passes Test Sulfate Max. 0.001 % Water Max. 0.5 %
packaging product number Unit size case size GR0725-065 1L 1L Amber Glass GR0725-002 1L 6x1L Amber Glass GR0725-048 4L 4L Amber Glass GR0725-001 4L 4x4L Amber Glass
bio gb1610
For Enzyme Stabilization, Freezing, and Electrophoresis Buffers Packaged under Nitrogen.
specifications Assay Min. 99.5 % Color (APHA) Max. 10 Dnase None Detected Heavy Metals (as Pb) Max. 5 ppm Iron (Fe) Max. 5 ppm Magnesium (Mg) Max. 1 ppm Protease None Detected R Nase None Detected Zinc (Zn) Max. 2 ppm Optical Absorbance of a 1M solution at 280 nm Max. 0.05
packaging product number Unit size case size GB1610-065 1L 1L Amber Glass GB1610-002 1L 6x1L Amber Glass GB1610-048 4L 4L Amber Glass GB1610-001 4L 4x4L Amber Glass
For-Gly
106GlYCEROl (CONTINUED)
spectro gs1611
For Use in Spectrophotometry Packaged under Nitrogen.
specifications Assay Min. 99.7 % Color (APHA) Max. 10 Water Max. 0.05 % Optical Absorbance at 205 nm Max. 1.00 210 nm Max. 0.30 225 nm Max. 0.10 280 nm Max. 0.05 320 nm Max. 0.02 400 nm Max. 0.01
packaging product number Unit size case size GS1611-065 1L 1L Amber Glass GS1611-002 1L 6x1L Amber Glass GS1611-048 4L 4L Amber Glass GS1611-001 4L 4x4L Amber Glass
GlYCINOlSee Ethanolamine
GlYCOlSee Ethylene Glycol
GlYCOl ETHERSee Diethylene Glycol
n-HEPTANE 96% CH
3(CH
2)
5CH
3 FW 100.21 CAS 142-82-5
MP -91°C BP 98°C D 0.684 Merck Index 13,4679 FP -1°C NFPA 1-3-0 Storage Code: RED IMO Heptanes, 3, UN1206, PG II
physical properties Boiling Point 98°C Density (g/ml) at 25°C 0.684 Dielectric Constant at 20°C 1.92 Elutropic Value (Silica) 0 Refractive Index (n20°/D) 1.387
absolv ha1709
For Use in Liquid Chromatography, Spectrophotometry, and for Organic Residue Analysis Packaged under Nitrogen.
specifications Assay (as n-Heptane) Min. 96.0 % Assay (C7 hydrocarbons) Min. 99.0 % Color (APHA) Max. 10
GC-ECD Responsive Residue (as Heptachlor Epoxide) Max. 10 ppt Fluorescence Background (as Quinine Sulfate) Max. 1 ppb Residue after Evaporation Max. 1 ppm Water Max. 0.02 % Optical Absorbance at 197 nm Max. 1.00 210 nm Max. 0.40 225 nm Max. 0.10 254 nm Max. 0.01 280 nm Max. 0.01
packaging product number Unit size case size HA1709-065 1L 1L Amber Glass HA1709-002 1L 6x1L Amber Glass HA1709-048 4L 4L Amber Glass HA1709-001 4L 4x4L Amber Glass
certified hr0811
specifications Assay (as n-Heptane) Min. 96.0 % Assay (C7 hydrocarbons) Min. 99.0 % Color (APHA) Max. 10 Residue after Evaporation Max. 0.001 % Sulfur Compounds (as S) Max. 0.005 % Thiophene Test Passes Test Water Max. 0.03 % Water-soluble Titrable Acid Max. 0.0003 meq/g
packaging product number Unit size case size HR0811-065 1L 1L Amber Glass HR0811-002 1L 6x1L Amber Glass HR0811-007 20L 20L Metal Pail HR0811-073 4L 4L PVC Coated Amber Glass HR0811-048 4L 4L Amber Glass HR0811-006 4L 4x4L PVC Coated Amber Glass HR0811-001 4L 4x4L Amber Glass
hplc/spectro hs1711
For Use in Liquid Chromatography and Spectrophotometry Packaged under Nitrogen. Submicron filtered.
specifications Assay (as n-Heptane) Min. 96.0 % Assay (C7 hydrocarbons) Min. 99.0 % Color (APHA) Max. 10 Residue after Evaporation Max. 3 ppm Sulfur Compounds (as S) Max. 0.005 % Thiophene Test Passes Test Water Max. 0.02 % Water-soluble Titrable Acid Max. 0.0003 meq/g Optical Absorbance at 197 nm Max. 1.00 210 nm Max. 0.40 225 nm Max. 0.10
107 254 nm Max. 0.01 280 nm Max. 0.01
packaging product number Unit size case size HS1711-065 1L 1L Amber Glass HS1711-002 1L 6x1L Amber Glass HS1711-073 4L 4L PVC Coated Amber Glass HS1711-048 4L 4L Amber Glass HS1711-006 4L 4x4L PVC Coated Amber Glass HS1711-001 4L 4x4L Amber Glass
n-HEPTANE 99% CH
3(CH
2)
5CH
3 FW 100.21 CAS 142-82-5
MP -91°C BP 98°C D 0.684 Merck Index 13,4679 FP -1°C NFPA 1-3-0 Storage Code: RED IMO Heptanes, 3, UN1206, PG II
physical properties Boiling Point 98°C Density (g/ml) at 25°C 0.684 Dielectric Constant at 20°C 1.92 Elutropic Value (Silica) 0 Refractive Index (n20°/D) 1.387
absolv ha1708
For Use in Liquid Chromatography, Spectrophotometry, and for Organic Residue Analysis Packaged under Nitrogen.
specifications Assay (as n-Heptane) Min. 99.0 % Assay (C7 hydrocarbons) Min. 99.5 % Color (APHA) Max. 10 GC-ECD Responsive Residue (as Heptachlor Epoxide) Max. 10 ppt
Fluorescence Background (as Quinine Sulfate) Max. 1 ppb Residue after Evaporation Max. 1 ppm Water Max. 0.02 % Optical Absorbance at 197 nm Max. 1.00 210 nm Max. 0.40 225 nm Max. 0.10 254 nm Max. 0.01 280 nm Max. 0.01
packaging product number Unit size case size HA1708-065 1L 1L Amber Glass HA1708-002 1L 6x1L Amber Glass HA1708-048 4L 4L Amber Glass HA1708-001 4L 4x4L Amber Glass
anhydrosolv hh3869
Packaged under Nitrogen in Septum Sealed Bottle
specifications Appearance (clear, colorless liquid) Passes Test Assay Min. 99.0 % Assay (C7 hydrocarbons) Min. 99.9 % Color (APHA) Max. 10 Residue after Evaporation Max. 5 ppm Water Max. 20 ppm
packaging product number Unit size case size HH3869-174 100ml 100ml Amber Glass with Septum Seal HH3869-100 100ml 6x100ml Amber Glass with Septum Seal HH3869-150 1L 6x1L Amber Glass with Septum Seal HH3869-041 1L 1L Amber Glass with Septum Seal
certified hr0812
specifications Assay (as n-Heptane) Min. 99.0 % Assay (C7 hydrocarbons) Min. 99.5 % Color (APHA) Max. 10 Residue after Evaporation Max. 0.001 % Boiling Point 98.3 – 98.5 ºC Boiling Range, including boiling point Max. 4 ºC Sulfur Compounds (as S) Max. 0.005 % Thiophene Test Passes Test Water Max. 0.03 % Water-soluble Titrable Acid Max. 0.0003 meq/g
packaging product number Unit size case size HR0812-065 1L 1L Amber Glass HR0812-002 1L 6x1L Amber Glass HR0812-007 20L 20L Metal Pail HR0812-073 4L 4L PVC Coated Amber Glass HR0812-048 4L 4L Amber Glass HR0812-006 4L 4x4L PVC Coated Amber Glass HR0812-001 4L 4x4L Amber Glass
Gly-Hep
108n-HEPTANE 99% (CONTINUED)
certified plUs hr2548
specifications Assay (as n-Heptane) Min. 99.0 % Assay (C7 Hydrocarbons) Min. 99.5 % Residue after Evaporation Max. 0.001 % Water Max. 0.03 % Color (APHA) Max. 10 Tracemetals Aluminum (Al) Max. 0.5 ppm Barium (Ba) Max. 0.1 ppm Boron (B) Max. 0.02 ppm Cadmium (Cd) Max. 0.05 ppm Calcium (Ca) Max. 0.5 ppm Chromium (Cr) Max. 0.02 ppm Cobalt (Co) Max. 0.02 ppm Copper (Cu) Max. 0.02 ppm Iron (Fe) Max. 0.1 ppm Lead (Pb) Max. 0.1 ppm Magnesium (Mg) Max. 0.1 ppm Manganese (Mn) Max. 0.02 ppm Nickel (Ni) Max. 0.02 ppm Tin (Sn) Max. 0.1 ppm Zinc (Zn) Max. 0.1 ppm
packaging product number Unit size case size HR2548-065 1L 1L Amber Glass HR2548-002 1L 6x1L Amber Glass HR2548-048 4L 4L Amber Glass HR2548-001 4L 4x4L Amber Glass
hplc/spectro hs1712
For Use in Liquid Chromatography and Spectrophotometry Packaged under Nitrogen. Submicron filtered.
specifications Assay (as n-Heptane) Min. 99.0 % Assay (C7 hydrocarbons) Min. 99.5 % Color (APHA) Max. 10 Residue after Evaporation Max. 3 ppm Sulfur Compounds (as S) Max. 0.005 % Thiophene Test Passes Test Water Max. 0.02 % Water-soluble Titrable Acid Max. 0.0003 meq/g Optical Absorbance at 197 nm Max. 1.00 210 nm Max. 0.40 225 nm Max. 0.10 254 nm Max. 0.01 280 nm Max. 0.01
packaging product number Unit size case size HS1712-065 1L 1L Amber Glass HS1712-002 1L 6x1L Amber Glass HS1712-073 4L 4L PVC Coated
Amber Glass HS1712-048 4L 4L Amber Glass HS1712-006 4L 4x4L PVC Coated Amber Glass HS1712-001 4L 4x4L Amber Glass
1-HEPTANESUlFONIC ACID, SODIUM SAlT(SODIUM 1-HEPTANESULFONATE)
CH3(CH
2)
6SO
3Na FW 202.26 CAS 22767-50-6
NFPA 1-1-0 Storage Code: GREEN
hplc hs3403
For Ion-Pair Chromatography of Basic Compounds
specifications Assay Min. 98.0 % Optical Absorbance of 0.25M Solution at 200 nm Max. 0.20 210 nm Max. 0.08 220 nm Max. 0.06 230 nm Max. 0.05 240 nm Max. 0.05 250 nm Max. 0.05 260 nm Max. 0.04
packaging product number Unit size case size HS3403-019 100g 100g Amber Glass HS3403-009 25g 25g Amber Glass
HExADECANE CH
3(CH
2)
14CH
3 FW 226.45 CAS 544-76-3
MP 18°C BP 287°C D 0.773 FP 135°C NFPA 0-1-0 Storage Code: GREEN
certified hr0814
specifications Assay Min. 99.0 % Color (APHA) Max. 10
packaging product number Unit size case size HR0814-069 100ml 100ml Amber Glass HR0814-025 100ml 6x100ml Amber Glass HR0814-053 500ml 500ml Amber Glass HR0814-013 500ml 6x500ml Amber Glass
109HExAHYDRObENzENESee Cyclohexane
HExAHYDROPHENOlSee Cyclohexanol
HExAHYDROPYRIDINESee Piperidine
HExAHYDROTOlUENESee Methylcyclohexane
HExAlINSee Cyclohexanol
n-HExANE 95% CH
3(CH
2)
4CH
3 FW 86.18 CAS 110-54-3
MP -95°C BP 69°C D 0.659 Merck Index 13,4712 FP -23°C NFPA 1-3-0 Storage Code: RED IMO Hexanes, 3, UN1208, PG II
physical properties Boiling Point1 69.0°C Density (g/ml) at 25°C 0.659 Dielectric Constant at 25°C 1.88 Elutropic Value (Silica) 0 Refractive Index (n20°/D) 1.375 Viscosity (cps) at 20°C 0.33 0.33
absolv ha1721
For Use in Liquid Chromatography, Spectrophotometry, and for Organic Residue Analysis Packaged under Nitrogen.
specifications Assay (n-Hexane) Min. 95 % Assay (as C6 hydrocarbons) Min. 99.5 % Color (APHA) Max. 10 GC-ECD Responsive Residue (as Heptachlor Epoxide) Max. 10 ppt GC-FID Responsive Residue (as 2-Octanol) Max. 5 ppb Fluorescence Background (as Quinine Sulfate) Max. 1 ppb Residue after Evaporation Max. 1 ppm Water Max. 0.01 % Optical Absorbance at 195 nm Max. 1.00 210 nm Max. 0.20 220 nm Max. 0.07 254 nm Max. 0.005 280 nm Max. 0.005 400 nm Max. 0.005
packaging product number Unit size case size HA1721-065 1L 1L Amber Glass HA1721-002 1L 6x1L Amber Glass HA1721-048 4L 4L Amber Glass HA1721-001 4L 4x4L Amber Glass
acs hr0823
Exceeds ACS specifications.
specifications Assay (n-Hexane) Report Only Assay (as C6 hydrocarbons) Min. 98.5 % Color (APHA) Max. 10 Residue after Evaporation Max. 0.001 % Sulfur Compounds (as S) Max. 0.005 % Thiophene Test Passes Test Water Max. 0.02 % Water-soluble Titrable Acid Max. 0.0003 meq/g
packaging product number Unit size case size HR0823-065 1L 1L Amber Glass HR0823-002 1L 6x1L Amber Glass HR0823-008 204L 204L Metal Drum HR0823-007 20L 20L Metal Pail HR0823-073 4L 4L PVC Coated Amber Glass HR0823-048 4L 4L Amber Glass HR0823-006 4L 4x4L PVC Coated Amber Glass HR0823-001 4L 4x4L Amber Glass
Hep-Hex
110n-HExANE 95% (CONTINUED)
acs plUs hr2552
Exceeds ACS specifications.
specifications Assay (as n-Hexane) Min. 95.0 % Assay (C6 Hydrocarbons) Min. 99.0 % Residue after Evaporation Max. 0.001 % Water Max. 0.02 % Color (APHA) Max. 10 Sulfur Compounds (as S) Max. 0.005 % Water-Soluble Titrable Acid Max. 0.0003 meq/g Thiophene Passes Test Tracemetals Aluminum (Al) Max. 0.5 ppm Barium (Ba) Max. 0.1 ppm Boron (B) Max. 0.02 ppm Cadmium (Cd) Max. 0.05 ppm Calcium (Ca) Max. 0.5 ppm Chromium (Cr) Max. 0.02 ppm Cobalt (Co) Max. 0.02 ppm Copper (Cu) Max. 0.02 ppm Iron (Fe) Max. 0.1 ppm Lead (Pb) Max. 0.1 ppm Magnesium (Mg) Max. 0.1 ppm Manganese (Mn) Max. 0.02 ppm Nickel (Ni) Max. 0.02 ppm Tin (Sn) Max. 0.1 ppm Zinc (Zn) Max. 0.1 ppm
packaging product number Unit size case size HR2552-065 1L 1L Amber Glass HR2552-002 1L 6x1L Amber Glass HR2552-048 4L 4L Amber Glass HR2552-001 4L 4x4L Amber Glass
gc hg2820
For Organic Residue Analysis Packaged under Nitrogen.
specifications Assay (n-Hexane) Min. 95 % Assay (as C6 hydrocarbons) Min. 99.5 % Color (APHA) Max. 10 GC-ECD Responsive Residue (as Heptachlor Epoxide) Max. 10 ppt GC-FID Responsive Residue (as 2-Octanol) Max. 5 ppb Residue after Evaporation Max. 1 ppm Water Max. 0.02 %
packaging product number Unit size case size HG2820-065 1L 1L Amber Glass HG2820-002 1L 6x1L Amber Glass HG2820-048 4L 4L Amber Glass HG2820-001 4L 4x4L Amber Glass
hplc/acs hs3341
For Use in Liquid Chromatography and Spectrophotometry Packaged under Nitrogen. Submicron filtered.
specifications Assay (n-Hexane) Min. 95 % Assay (as C6 hydrocarbons) Min. 99.5 % Color (APHA) Max. 10 Residue after Evaporation Max. 5 ppm Sulfur Compounds (as S) Max. 0.005 % Thiophene Test Passes Test Water Max. 0.02 % Water-soluble Titrable Acid Max. 0.0003 meq/g Optical Absorbance at 195 nm Max. 1.00 210 nm Max. 0.30 220 nm Max. 0.10 230 nm Max. 0.05 240 nm Max. 0.04 270 nm Max. 0.01 400 nm Max. 0.01
packaging product number Unit size case size HS3341-008 204L 204L Metal Drum
hplc/spectro hs1722
For Use in Liquid Chromatography and Spectrophotometry Packaged under Nitrogen. Submicron filtered. Also meets ACS specifications.
specifications Assay (n-Hexane) Min. 95 % Assay (as C6 hydrocarbons) Min. 99.5 % Color (APHA) Max. 10 Residue after Evaporation Max. 2 ppm Sulfur Compounds (as S) Max. 0.005 % Thiophene Test Passes Test Water Max. 0.01 % Water-soluble Titrable Acid Max. 0.0003 meq/g Optical Absorbance at 195 nm Max. 1.00 210 nm Max. 0.20 220 nm Max. 0.08 254 nm Max. 0.01 280 nm Max. 0.005 400 nm Max. 0.005
packaging product number Unit size case size HS1722-065 1L 1L Amber Glass HS1722-002 1L 6x1L Amber Glass HS1722-073 4L 4L PVC Coated Amber Glass HS1722-048 4L 4L Amber Glass
HS1722-006 4L 4x4L PVC Coated Amber Glass HS1722-001 4L 4x4L Amber Glass
111n-HExANE 99% CH
3(CH
2)
4CH
3 FW 86.18 CAS 110-54-3
MP -95°C BP 69°C D 0.659 Merck Index 13,4712 FP -23°C NFPA 1-3-0 Storage Code: RED IMO Hexanes, 3, UN1208, PG II
physical properties Boiling Point 69.0°C Density (g/ml) at 25°C 0.659 Dielectric Constant at 25°C 1.88 Elutropic Value (Silica) 0 Refractive Index (n20°/D) 1.375 Viscosity (cps) at 20°C 0.33
certified hr0821
specifications Assay Min. 99.0 % Color (APHA) Max. 10 Residue after Evaporation Max. 0.001 % Water Max. 0.03 %
packaging product number Unit size case size HR0821-053 500ml 500ml Amber Glass HR0821-013 500ml 6x500ml Amber Glass
hplc/spectro hs4721
For Use in Liquid Chromatography and Spectrophotometry Packaged under Nitrogen. Submicron filtered. Exceeds ACS specifications.
specifications Assay (n-Hexane) Min. 99.0 % Assay (as C6 hydrocarbons) Min. 99.5 % Color (APHA) Max. 10 Fluorescence at 450 nm (as Quinine) Max. 0.3 ppb Fluorescence at Emission Maximum for Impurities Max. 1.0 ppb Residue after Evaporation Max. 3 ppm Sulfur Compounds (as S) Max. 0.005 % Thiophene Test Passes Test Water Max. 0.03 % Water-soluble Titrable Acid Max. 0.0003 meq/g Optical Absorbance at 210 nm Max. 1.00 220 nm Max. 0.20 230 nm Max. 0.10 240 nm Max. 0.04 250 nm Max. 0.02 280 nm Max. 0.01 400 nm Max. 0.01
packaging product number Unit size case size HS4721-065 1L 1L Amber Glass HS4721-002 1L 6x1L Amber Glass HS4721-048 4L 4L Amber Glass HS4721-001 4L 4x4L Amber Glass
HExANES CH
3(CH
2)
4CH
3 FW 86.18 CAS 110-54-3
MP -95°C BP 69°C D 0.659 Merck Index 13,4712 FP -23°C NFPA 1-3-0 Storage Code: RED IMO Hexanes, 3, UN1208, PG II
physical properties Boiling Point 69.0°C Density (g/ml) at 25°C 0.659 Dielectric Constant at 25°C 1.88 Elutropic Value (Silica) 0 Refractive Index (n20°/D) 1.375 Viscosity (cps) at 20°C 0.33 0.33
absolv ha0800
For Use in Liquid Chromatography, Spectrophotometry, and for Organic Residue Analysis Packaged under Nitrogen.
specifications Assay (n-Hexane) Min. 60 % Assay (as C6 hydrocarbons) Min. 99.0 % Color (APHA) Max. 10 GC-ECD Responsive Residue (as Heptachlor Epoxide) Max. 10 ppt Fluorescence Background (as Quinine Sulfate) Max. 1 ppb Residue after Evaporation Max. 1 ppm Water Max. 0.01 % Optical Absorbance at 195 nm Max. 1.00 210 nm Max. 0.20 220 nm Max. 0.07 254 nm Max. 0.005 280 nm Max. 0.005 400 nm Max. 0.005
packaging product number Unit size case size HA0800-065 1L 1L Amber Glass HA0800-002 1L 6x1L Amber Glass HA0800-048 4L 4L Amber Glass HA0800-001 4L 4x4L Amber Glass
Hep-Hex
112HExANES (CONTINUED)
acs hr0801
Meets reagent specifications for testing USP/NF monographs.
specifications Assay (as C6 hydrocarbons) Min. 98.5 % Assay (n-Hexane) Report Only Color (APHA) Max. 10 Residue after Evaporation Max. 10 ppm Sulfur Compounds (as S) Max. 0.005 % Thiophene Test Passes Test Water Max. 0.02 % Water-soluble Titrable Acid Max. 0.0003 meq/g
packaging product number Unit size case size HR0801-065 1L 1L Amber Glass HR0801-002 1L 6x1L Amber Glass HR0801-008 204L 204L Metal Drum HR0801-007 20L 20L Metal Pail HR0801-073 4L 4L PVC Coated Amber Glass HR0801-048 4L 4L Amber Glass HR0801-006 4L 4x4L PVC Coated Amber Glass HR0801-001 4L 4x4L Amber Glass
anhydrosolv hh0803
Packaged under Nitrogen in Septum Sealed Bottle
specifications Assay (n-Hexane) Min. 60 % Assay (as C6 hydrocarbons) Min. 99.0 % Residue after Evaporation Max. 5 ppm Water Max. 20 ppm
packaging product number Unit size case size HH0803-174 100ml 100ml Amber Glass with Septum Seal HH0803-100 100ml 6x100ml Amber Glass with Septum Seal HH0803-150 1L 6x1L Amber Glass with Septum Seal HH0803-041 1L 1L Amber Glass with Septum Seal
gc hg0808
For Organic Residue Analysis Packaged under Nitrogen.
specifications Assay (as n-Hexane) Min. 60 % Assay (C6 Hydrocarbons) Min. 99.0 % Residue after Evaporation Max. 1 ppm Water Max. 0.02 %
Color (APHA) Max. 10 GC-ECD Halogenated Residue (as Heptachlor Epoxide) Max. 10 ppt GC-FID Responsive Residue (as 2-Octanol) Max. 5 ppb
packaging product number Unit size case size HG0808-065 1L 1L Amber Glass HG0808-002 1L 6x1L Amber Glass HG0808-048 4L 4L Amber Glass HG0808-001 4L 4x4L Amber Glass
hplc/acs hs0805
For Use in Liquid Chromatography and Spectrophotometry Packaged under Nitrogen. Submicron filtered.
specifications Assay (n-Hexane) Min. 60 % Assay (as C6 hydrocarbons) Min. 99.0 % Color (APHA) Max. 10 Residue after Evaporation Max. 5 ppm Sulfur Compounds (as S) Max. 0.005 % Thiophene Test Passes Test Water Max. 0.02 % Water-soluble Titrable Acid Max. 0.0003 meq/g Optical Absorbance at 195 nm Max. 1.00 210 nm Max. 0.30 220 nm Max. 0.10 230 nm Max. 0.05 240 nm Max. 0.04 270 nm Max. 0.01 400 nm Max. 0.01
packaging product number Unit size case size HS0805-008 204L 204L Metal Drum
hplc/spectro hs0806
For Use in Liquid Chromatography and Spectrophotometry Packaged under Nitrogen. Submicron filtered. Also meets ACS specifications.
specifications Assay (n-Hexane) Min. 60 % Assay (as C6 hydrocarbons) Min. 99.0 % Color (APHA) Max. 10 Residue after Evaporation Max. 2 ppm Sulfur Compounds (as S) Max. 0.005 % Thiophene Test Passes Test Water Max. 0.01 % Water-soluble Titrable Acid Max. 0.0003 meq/g Optical Absorbance at 195 nm Max. 1.00 210 nm Max. 0.20 220 nm Max. 0.08 254 nm Max. 0.01 280 nm Max. 0.005
400 nm Max. 0.005
113
packaging product number Unit size case size HS0806-065 1L 1L Amber Glass HS0806-002 1L 6x1L Amber Glass HS0806-073 4L 4L PVC Coated Amber Glass HS0806-048 4L 4L Amber Glass HS0806-006 4L 4x4L PVC Coated Amber Glass HS0806-001 4L 4x4L Amber Glass
1-HExANESUlFONIC ACID, SODIUM SAlT CH
3(CH
2)
5SO
3Na FW 188.22 CAS 2832-45-3
NFPA 1-1-0 Storage Code: GREEN
hplc hs3408
For Ion-Pair Chromatography of Basic Compounds
specifications Assay Min. 98.0 % Optical Absorbance of 0.25M Solution at 200 nm Max. 0.20 210 nm Max. 0.08 220 nm Max. 0.06 230 nm Max. 0.05 240 nm Max. 0.05 250 nm Max. 0.05
packaging product number Unit size case size HS3408-019 100g 100g Amber Glass HS3408-009 25g 25g Amber Glass
1-HExANOlSee Hexyl Alcohol
HExONESee Methyl iso-Butyl Ketone
HExYl AlCOHOl(1-HExANOL)
CH3(CH
2)
5OH FW 102.18 CAS 111-27-3
MP -52°C BP 156.5°C D 0.814 Merck Index 13,4715 FP 60°C NFPA 1-2-0 Storage Code: RED IMO Hexanols, 3, UN2282, PG III
certified hr0828
specifications Assay Min. 98.0 % Color (APHA) Max. 10 Water Max. 0.1 %
packaging product number Unit size case size HR0828-065 1L 1L Amber Glass HR0828-002 1L 6x1L Amber Glass HR0828-048 4L 4L Amber Glass HR0828-001 4L 4x4L Amber Glass
Hex-
114HYDROCHlORIC ACID HCl FW 36.46 CAS 7647-01-0 D 1.190 Merck Index 13,4801 NFPA 3-0-2 Storage Code: WHITE IMO Hydrochloric Acid, 8, UN1789, PG II
traceMetal he4088
Concentration of some elements may change over time due to storage in glass container.
specifications Assay (HCl) 34 - 37 % Color (APHA) Max. 10 Free Chlorine (Cl2) Max. 0.5 ppm Total Phosphorus (P) Max. 0.01 ppm Total Sulfur (S) Max. 0.3 ppm Bromide (Br) Max. 10 ppm Aluminum (Al) Max. 1 ppb Antimony (Sb) Max. 1 ppb Arsenic (As) Max. 1 ppb Barium (Ba) Max. 1 ppb Beryllium (Be) Max. 1 ppb Bismuth (Bi) Max. 1 ppb Boron (B) Max. 1 ppb Cadmium (Cd) Max. 1 ppb Calcium (Ca) Max. 1 ppb Cerium (Ce) Max. 0.5 ppb Cesium (Cs) Max. 0.5 ppb Chromium (Cr) Max. 1 ppb Cobalt (Co) Max. 1 ppb Copper (Cu) Max. 1 ppb Dysprosium (Dy) Max. 0.5 ppb Erbium (Er) Max. 0.5 ppb Europium (Eu) Max. 0.5 ppb Gadolinium (Gd) Max. 0.5 ppb Gallium (Ga) Max. 0.5 ppb Gold (Au) Max. 0.5 ppb Hafnium (Hf ) Max. 0.5 ppb Holmium (Ho) Max. 0.5 ppb Indium (In) Max. 0.5 ppb Iron (Fe) Max. 1 ppb Lanthanum (La) Max. 0.5 ppb Lead (Pb) Max. 1 ppb Lithium (Li) Max. 1 ppb Lutetium (Lu) Max. 0.5 ppb Magnesium (Mg) Max. 1 ppb Manganese (Mn) Max. 1 ppb Mercury (Hg) Max. 1 ppb Molybdenum (Mo) Max. 1 ppb Neodymium (Nd) Max. 0.5 ppb Nickel (Ni) Max. 1 ppb Niobium (Nb) Max. 0.5 ppb Palladium (Pd) Report Only Platinum (Pt) Report Only Potassium (K) Max. 1 ppb Praseodymium (Pr) Max. 0.5 ppb Rhenium (Re) Max. 0.5 ppb
Rhodium (Rh) Max. 0.5 ppb Rubidium (Rb) Max. 0.5 ppb Ruthenium (Ru) Max. 0.5 ppb Samarium (Sm) Max. 0.5 ppb Scandium (Sc) Max. 0.5 ppb Selenium (Se) Max. 1 ppb Silver (Ag) Max. 1 ppb Sodium (Na) Max. 1 ppb Strontium (Sr) Max. 1 ppb Tantalum (Ta) Report Only Tellurium (Te) Max. 0.5 ppb Terbium (Tb) Max. 0.5 ppb Thallium (Tl) Max. 0.5 ppb Thorium (Th) Max. 1 ppb Thulium (Tm) Max. 0.5 ppb Tin (Sn) Max. 1 ppb Titanium (Ti) Max. 1 ppb Tungsten (W) Max. 0.5 ppb Uranium (U) Max. 1 ppb Vanadium (V) Max. 1 ppb Ytterbium (Yb) Max. 0.5 ppb Yttrium (Y) Max. 0.5 ppb Zinc (Zn) Max. 1 ppb Zirconium (Zr) Max. 1 ppb
packaging product number Unit size case size HE4088-058 2.5L 2.5L Flint Glass HE4088-011 2.5L 4x2.5L Flint Glass HE4088-071 500ml 500ml Flint Glass HE4088-068 500ml 6x500ml Flint Glass
traceMetal plUs he4087
Packaged in specially manufactured, precleaned Teflon® PFA bottles to protect product integrity.
specifications Assay (HCl) 32 - 35 % Aluminum (Al) Max. 20 ppt Antimony (Sb) Max. 20 ppt Arsenic (As) Max. 50 ppt Barium (Ba) Max. 10 ppt Beryllium (Be) Max. 10 ppt Bismuth (Bi) Max. 10 ppt Boron (B) Max. 100 ppt Cadmium (Cd) Max. 10 ppt Calcium (Ca) Max. 20 ppt Cerium (Ce) Max. 10 ppt Cesium (Cs) Max. 10 ppt Chromium (Cr) Max. 20 ppt Cobalt (Co) Max. 10 ppt Copper (Cu) Max. 20 ppt Dysprosium (Dy) Max. 1 ppt Erbium (Er) Max. 1 ppt Europium (Eu) Max. 1 ppt Gadolinium (Gd) Max. 1 ppt Gallium (Ga) Max. 10 ppt Gold (Au) Max. 100 ppt Hafnium (Hf ) Max. 10 ppt Holmium (Ho) Max. 1 ppt
115 Indium (In) Max. 1 ppt Iron (Fe) Max. 20 ppt Lanthanum (La) Max. 1 ppt Lead (Pb) Max. 10 ppt Lithium (Li) Max. 10 ppt Lutetium (Lu) Max. 10 ppt Magnesium (Mg) Max. 10 ppt Manganese (Mn) Max. 10 ppt Mercury (Hg) Max. 100 ppt Molybdenum (Mo) Max. 10 ppt Neodymium (Nd) Max. 1 ppt Nickel (Ni) Max. 50 ppt Niobium (Nb) Max. 1 ppt Palladium (Pd) Report Only Platinum (Pt) Report Only Potassium (K) Max. 10 ppt Praseodymium (Pr) Max. 1 ppt Rhenium (Re) Max. 10 ppt Rhodium (Rh) Max. 10 ppt Rubidium (Rb) Max. 10 ppt Ruthenium (Ru) Max. 10 ppt Samarium (Sm) Max. 1 ppt Scandium (Sc) Max. 10 ppt Selenium (Se) Report Only Silver (Ag) Max. 10 ppt Sodium (Na) Max. 10 ppt Strontium (Sr) Max. 10 ppt Tantalum (Ta) Report Only Tellurium (Te) Max. 1 ppt Terbium (Tb) Max. 1 ppt Thallium (Tl) Max. 10 ppt Thorium (Th) Max. 1 ppt Thulium (Tm) Max. 1 ppt Tin (Sn) Max. 20 ppt Titanium (Ti) Max. 20 ppt Tungsten (W) Max. 10 ppt Uranium (U) Max. 1 ppt Vanadium (V) Max. 10 ppt Ytterbium (Yb) Max. 1 ppt Yttrium (Y) Max. 1 ppt Zinc (Zn) Max. 20 ppt Zirconium (Zr) Max. 10 ppt
packaging product number Unit size case size HE4087-030 1L 1L Teflon Bottle HE4087-042 250ml 250ml Teflon Bottle HE4087-063 2L 2L Teflon Bottle HE4087-029 500ml 500ml Teflon Bottle
HYDROCHlORIC ACID 37% HCl FW 36.46 CAS 7647-01-0 D 1.190 Merck Index 13,4801 NFPA 3-0-2 Storage Code: WHITE IMO Hydrochloric Acid, 8, UN1789, PG II
acs hr0870
Meets reagent specifications for testing USP/NF monographs.
specifications Ammonium Max. 3 ppm Appearance Passes Test Arsenic (As) Max. 0.01 ppm Assay (HCl) 36.5 - 38 % Bromide (Br) Max. 0.005 % Color (APHA) Max. 10 Extractable Organic Substances Max. 5 ppm Free Chlorine (as Cl) Max. 1 ppm Heavy Metals (as Pb) Max. 1 ppm Iron (Fe) Max. 0.2 ppm Residue after Ignition Max. 5 ppm Sulfate Max. 1 ppm Sulfite Max. 1 ppm
packaging product number Unit size case size HR0870-058 2.5L 2.5L Flint Glass HR0870-011 2.5L 4x2.5L Flint Glass HR0870-071 500ml 500ml Flint Glass HR0870-068 500ml 6x500ml Flint Glass
HYDROFlUORIC ACID HF FW 20.01 CAS 7664-39-3 D 1.150 Merck Index 13,4811 NFPA 4-0-1 Storage Code: WHITE IMO Hydrofluoric Acid, Solution, 8 (6.1), UN1790, PG II
acs hr0881
Meets reagent specifications for testing USP/NF monographs.
specifications Arsenic (As) Max. 0.05 ppm Assay (HF) 48.0 - 51.0 % Chloride (Cl) Max. 5 ppm Copper (Cu) Max. 0.1 ppm Fluosilicic Acid Max. 0.01 % Heavy Metals (as Pb) Max. 0.5 ppm Iron (Fe) Max. 1 ppm Phosphate Max. 1 ppm Residue after Ignition Max. 5 ppm Sulfate and Sulfite (as Sulfate) Max. 5 ppm
packaging product number Unit size case size HR0881-066 4L 4L Poly Bottle HR0881-012 4L 4x4L Poly Bottle HR0881-070 500ml 500ml Poly Bottle HR0881-020 500ml 6x500ml Poly Bottle
Hyd-
116HYDROFlUORIC ACID (CONTINUED)
traceMetal he0879
Concentration of some elements may change over time due to storage in glass container.
specifications Assay (HF) 47 - 51 % Color (APHA) Max. 10 Chloride (Cl) Max. 4 ppm Total Phosphorus (P) Max. 0.05 ppm Total Sulfur (S) Max. 0.5 ppm Fluosilicic Acid Max. 20 ppm Aluminum (Al) Max. 1 ppb Antimony (Sb) Max. 1 ppb Arsenic (As) Max. 1 ppb Barium (Ba) Max. 1 ppb Beryllium (Be) Max. 1 ppb Bismuth (Bi) Max. 1 ppb Boron (B) Max. 1 ppb Cadmium (Cd) Max. 1 ppb Calcium (Ca) Max. 1 ppb Cerium (Ce) Max. 0.5 ppb Cesium (Cs) Max. 0.5 ppb Chromium (Cr) Max. 1 ppb Cobalt (Co) Max. 1 ppb Copper (Cu) Max. 1 ppb Dysprosium (Dy) Max. 0.5 ppb Erbium (Er) Max. 0.5 ppb Europium (Eu) Max. 0.5 ppb Gadolinium (Gd) Max. 0.5 ppb Gallium (Ga) Max. 0.5 ppb Germanium (Ge) Max. 0.5 ppb Gold (Au) Max. 0.5 ppb Hafnium (Hf ) Max. 0.5 ppb Holmium (Ho) Max. 0.5 ppb Indium (In) Max. 0.5 ppb Iron (Fe) Max. 1 ppb Lanthanum (La) Max. 0.5 ppb Lead (Pb) Max. 1 ppb Lithium (Li) Max. 1 ppb Lutetium (Lu) Max. 0.5 ppb Magnesium (Mg) Max. 1 ppb Manganese (Mn) Max. 1 ppb Mercury (Hg) Max. 10 ppb Molybdenum (Mo) Max. 1 ppb Neodymium (Nd) Max. 0.5 ppb Nickel (Ni) Max. 1 ppb Niobium (Nb) Max. 0.5 ppb Palladium (Pd) Max. 0.5 ppb Platinum (Pt) Max. 0.5 ppb Potassium (K) Max. 1 ppb Praseodymium (Pr) Max. 0.5 ppb Rhenium (Re) Max. 0.5 ppb Rhodium (Rh) Max. 0.5 ppb Rubidium (Rb) Max. 0.5 ppb Ruthenium (Ru) Max. 0.5 ppb Samarium (Sm) Max. 0.5 ppb
Scandium (Sc) Max. 0.5 ppb Selenium (Se) Max. 1 ppb Silver (Ag) Max. 1 ppb Sodium (Na) Max. 1 ppb Strontium (Sr) Max. 1 ppb Tantalum (Ta) Report Only Tellurium (Te) Max. 0.5 ppb Terbium (Tb) Max. 0.5 ppb Thallium (Tl) Max. 0.5 ppb Thorium (Th) Max. 1 ppb Thulium (Tm) Max. 0.5 ppb Tin (Sn) Max. 1 ppb Titanium (Ti) Max. 1 ppb Tungsten (W) Max. 0.5 ppb Uranium (U) Max. 1 ppb Vanadium (V) Max. 1 ppb Ytterbium (Yb) Max. 0.5 ppb Yttrium (Y) Max. 0.5 ppb Zinc (Zn) Max. 1 ppb Zirconium (Zr) Max. 1 ppb
packaging product number Unit size case size HE0879-066 4L 4L Poly Bottle HE0879-012 4L 4x4L Poly Bottle HE0879-070 500ml 500ml Poly Bottle HE0879-020 500ml 6x500ml Poly Bottle
traceMetal plUs he0878
specifications Assay (HF) 47 - 51 % Aluminum (Al) Max. 20 ppt Antimony (Sb) Max. 20 ppt Arsenic (As) Max. 50 ppt Barium (Ba) Max. 10 ppt Beryllium (Be) Max. 10 ppt Bismuth (Bi) Max. 10 ppt Boron (B) Max. 100 ppt Cadmium (Cd) Max. 10 ppt Calcium (Ca) Max. 20 ppt Cerium (Ce) Max. 10 ppt Cesium (Cs) Max. 10 ppt Chromium (Cr) Max. 20 ppt Cobalt (Co) Max. 10 ppt Copper (Cu) Max. 20 ppt Dysprosium (Dy) Max. 1 ppt Erbium (Er) Max. 1 ppt Europium (Eu) Max. 1 ppt Gadolinium (Gd) Max. 1 ppt Gallium (Ga) Max. 10 ppt Germanium (Ge) Max. 10 ppt Gold (Au) Max. 20 ppt Hafnium (Hf ) Max. 10 ppt Holmium (Ho) Max. 1 ppt Indium (In) Max. 1 ppt Iron (Fe) Max. 20 ppt Lanthanum (La) Max. 10 ppt Lead (Pb) Max. 10 ppt Lithium (Li) Max. 10 ppt Lutetium (Lu) Max. 1 ppt
117 Magnesium (Mg) Max. 10 ppt Manganese (Mn) Max. 10 ppt Mercury (Hg) Max. 100 ppt Molybdenum (Mo) Max. 10 ppt Neodymium (Nd) Max. 1 ppt Nickel (Ni) Max. 50 ppt Niobium (Nb) Max. 10 ppt Palladium (Pd) Max. 20 ppt Platinum (Pt) Max. 20 ppt Potassium (K) Max. 10 ppt Praseodymium (Pr) Max. 1 ppt Rhenium (Re) Max. 10 ppt Rhodium (Rh) Max. 20 ppt Rubidium (Rb) Max. 20 ppt Ruthenium (Ru) Max. 20 ppt Samarium (Sm) Max. 1 ppt Scandium (Sc) Max. 10 ppt Selenium (Se) Report Only Silver (Ag) Max. 10 ppt Sodium (Na) Max. 10 ppt Strontium (Sr) Max. 10 ppt Tantalum (Ta) Report Only Tellurium (Te) Max. 1 ppt Terbium (Tb) Max. 1 ppt Thallium (Tl) Max. 10 ppt Thorium (Th) Max. 1 ppt Thulium (Tm) Max. 1 ppt Tin (Sn) Max. 20 ppt Titanium (Ti) Max. 50 ppt Tungsten (W) Max. 20 ppt Uranium (U) Max. 1 ppt Vanadium (V) Max. 10 ppt Ytterbium (Yb) Max. 1 ppt Yttrium (Y) Max. 1 ppt Zinc (Zn) Max. 20 ppt Zirconium (Zr) Max. 10 ppt
packaging product number Unit size case size HE0878-064 1L 1L Poly Bottle HE0878-062 250ml 250ml Poly Bottle HE0878-070 500ml 500ml Poly Bottle
HYDROGEN PEROxIDE 3% CAS 7722-84-1 D 1.000 Merck Index 13,4819 NFPA 0-0-1 Storage Code: GREEN IMO Hydrogen Peroxide, Aqueous Solution, 5.1, UN2014, PG II
certified hr0886
(Stabilized)
specifications Arsenic (As) Max. 0.1 ppm Assay (Hydrogen Peroxide) 3.0 - 3.5 % Chloride (Cl) Max. 5 ppm
Free Acid (as Sulfuric Acid) Max. 0.01 % Heavy Metals (as Pb) Max. 1 ppm Iron (Fe) Max. 5 ppm Nitrogen Compounds (as N) Max. 0.005 % Phosphate Max. 0.003 % Residue after Evaporation Max. 0.05 % Sulfate Max. 0.005 %
packaging product number Unit size case size HR0886-066 4L 4L Poly Bottle HR0886-012 4L 4x4L Poly Bottle HR0886-070 500ml 500ml Poly Bottle HR0886-020 500ml 6x500ml Poly Bottle
HYDROGEN PEROxIDE 30% H
2O
2 FW 34.02 CAS 7722-84-1
D 1.11 Merck Index 13,4839 NFPA 2-0-1 Oxy Storage Code: YELLOW IMO Hydrogen Peroxide, Aqueous Solution, 5.1, UN2014, PG II
acs hr0885
Meets reagent specifications for testing USP/NF monographs. (Stabilized)
specifications Ammonium Max. 5 ppm Assay (Hydrogen Peroxide) 29.0 - 32.0 % Chloride (Cl) Max. 3 ppm Color (APHA) Max. 10 Heavy Metals (as Pb) Max. 1 ppm Iron (Fe) Max. 0.5 ppm Nitrate Max. 2 ppm Phosphate Max. 2 ppm Residue after Evaporation Max. 0.002 % Sulfate Max. 5 ppm Titrable Acid Max. 0.0006 meq/g
packaging product number Unit size case size HR0885-066 4L 4L Poly Bottle HR0885-012 4L 4x4L Poly Bottle HR0885-070 500ml 500ml Poly Bottle HR0885-020 500ml 6x500ml Poly Bottle
(4-HYDROxYbUTYRIC ACID)See y-Butyrolactone
2-HYDROxYPROPIONIC ACIDSee Lactic Acid
a-HYDROxYTOlUENESee Benzyl Alcohol
Hyd-
118HYPNONESee Acetophenone
2,2’- IMINODIETHANOlSee Diethanolamine
IODINE-MONOCHlORIDE SOlUTION (WIjS SOLUTION)
CAS 7553-56-2 FP 40°C NFPA 3-2-1 Storage Code: RED IMO Corrosive Liquid N.O.S. (Acetic Acid, Iodine Monochloride), 8, UN2920, PG II
certified ir0913
specifications Assay (Halogen Content as Normality) 0.215 - 0.225 Halogen Ratio 1.00 - 1.20
packaging product number Unit size case size IR0913-065 1L 1L Amber Glass IR0913-002 1L 6x1L Amber Glass IR0913-048 4L 4L Amber Glass IR0913-001 4L 4x4L Amber Glass
IPASee Isopropyl Alcohol
ISOAMYl ACETATE(ISOPENTYL ACETATE)
CH3CO
2CH
2CH
2CH(CH
3)
2
FW 130.19 CAS 123-92-2 MP -78°C BP 142°C/756mm D 0.876 Merck Index 13,5125 FP 25°C NFPA 1-3-0 Storage Code: RED IMO Amyl Acetates, 3, UN1104, PG III
certified ar0161
specifications Assay Min. 99.0 % Water Max. 0.2 %
packaging product number Unit size case size AR0161-065 1L 1L Amber Glass AR0161-002 1L 6x1L Amber Glass AR0161-048 4L 4L Amber Glass AR0161-001 4L 4x4L Amber Glass
ISOAMYl AlCOHOl (3-METHYL-1-BUTANOL, ISOPENTYL ALCOHOL)
(CH3)
2CHCH
2CH
2OH FW 88.15 CAS 123-51-3
MP -117°C BP 130°C D 0.809 Merck Index 13,5214 FP 45°C NFPA 1-2-0 Storage Code: RED IMO Pentanols, 3, UN1105, PG III
acs ar0163
specifications Acids and Esters (as Amyl Acetate) Max. 0.2 % Assay Min. 98.5 % Carbonyl Compounds (as Formaldehyde) Max. 0.1 % Residue after Evaporation Max. 0.003 % Titrable Acid Max. 0.002 meq/g Water Max. 0.5 %
packaging product number Unit size case size AR0163-065 1L 1L Amber Glass AR0163-002 1L 6x1L Amber Glass AR0163-048 4L 4L Amber Glass AR0163-001 4L 4x4L Amber Glass
ISObUTYl ACETATE CH
3CO
2CH
2CH(CH
3)
2 FW 116.16 CAS 110-19-0
MP -99°C BP 115-117°C D 0.868 Merck Index 13,5147 FP 21°C NFPA 1-3-0 Storage Code: RED IMO Butyl Acetates, 3, UN1123, PG II
certified br0286
specifications Assay Min. 99.0 % Color (APHA) Max. 10 Water Max. 0.05 %
packaging product number Unit size case size BR0286-065 1L 1L Amber Glass BR0286-002 1L 6x1L Amber Glass BR0286-048 4L 4L Amber Glass BR0286-001 4L 4x4L Amber Glass
ISObUTYl AlCOHOl(2-METHYL-1-PROPANOL)
(CH3)
2CHCH
2OH FW 74.12 CAS 78-83-1
MP -108°C BP 108°C D 0.803 Merck Index 13,5148 FP 27°C NFPA 1-3-0 Storage Code: RED IMO Isobutanol, 3, UN1212, PG III
physical properties Boiling Point (760mm) 108°C Density (g/ml) at 25°C 0.803 Refractive Index (n20°/D) 1.396
119acs br0290
Meets reagent specifications for testing USP/NF monographs.
specifications Assay Min. 99.0 % Carbonyl Compounds (as 2-Butanone) Max. 0.02 % Carbonyl Compounds (as Butaraldehyde) Max. 0.01 % Color (APHA) Max. 10 Residue after Evaporation Max. 0.001 % Solubility in Water Passes Test Titrable Acid Max. 0.0005 meq/g Water Max. 0.1 %
packaging product number Unit size case size BR0290-065 1L 1L Amber Glass BR0290-002 1L 6x1L Amber Glass BR0290-048 4L 4L Amber Glass BR0290-001 4L 4x4L Amber Glass
acs plUs br2558
Meets reagent specifications for testing USP/NF monographs.
specifications Carbonyl Compounds ( 2-Butanone) Max. 0.02 % Carbonyl Compounds (as Butyraldehyde) Max. 0.01 % Assay Min. 99.0 % Residue after Evaporation Max. 0.001 % Water Max. 0.1 % Color (APHA) Max. 10 Solubility in Water Passes Test Titrable Acid Max. 0.0005 meq/g Tracemetals Aluminum (Al) Max. 0.5 ppm Barium (Ba) Max. 0.1 ppm Boron (B) Max. 0.02 ppm Cadmium (Cd) Max. 0.05 ppm Calcium (Ca) Max. 0.5 ppm Chromium (Cr) Max. 0.02 ppm Cobalt (Co) Max. 0.02 ppm Copper (Cu) Max. 0.02 ppm Iron (Fe) Max. 0.1 ppm Lead (Pb) Max. 0.1 ppm Magnesium (Mg) Max. 0.1 ppm Manganese (Mn) Max. 0.02 ppm Nickel (Ni) Max. 0.02 ppm Tin (Sn) Max. 0.1 ppm Zinc (Zn) Max. 0.1 ppm
packaging product number Unit size case size BR2558-065 1L 1L Amber Glass BR2558-002 1L 6x1L Amber Glass BR2558-048 4L 4L Amber Glass BR2558-001 4L 4x4L Amber Glass
hplc/spectro bs1231
For Use in Liquid Chromatography and Spectrophotometry Packaged under Nitrogen. Submicron filtered.
specifications Assay Min. 99.0 % Color (APHA) Max. 10 Residue after Evaporation Max. 5 ppm Water Max. 0.05 % Optical Absorbance at 220 nm Max. 1.00 230 nm Max. 0.50 250 nm Max. 0.10 330 nm Max. 0.01
packaging product number Unit size case size BS1231-065 1L 1L Amber Glass BS1231-002 1L 6x1L Amber Glass BS1231-048 4L 4L Amber Glass BS1231-001 4L 4x4L Amber Glass
ISOOCTANESee 2,2,4-Trimethylpentane
ISOPENTANESee 2-Methylbutane
ISOPENTYl AlCOHOlSee Isoamyl Alcohol
ISOPROPANOlSee Isopropyl Alcohol
ISOPROPYl AlCOHOl(2-PROPANOL, ISOPROPANOL)
(CH3)
2CHOH FW 60.10 CAS 67-63-0
MP -89.5°C BP 82.4°C D 0.785 Merck Index 13,5228 FP 11°C NFPA 1-3-0 Storage Code: RED IMO Isopropanol, 3, UN1219, PG II
physical properties Boiling Point (760mm) 82.4°C Density (g/ml) at 25°C 0.785 Dielectric Constant at 25°C 19.92 Elutropic Value (Silica) 0.63 Refractive Index (n20°/D) 1.377 Viscosity (cps) at 20°C 2.3
Hyp-Iso
120ISOPROPYl AlCOHOl(CONTINUED)
absolv pa2031
For Use in Liquid Chromatography, Spectrophotometry, and for Organic Residue Analysis Packaged under Nitrogen. Submicron filtered.
specifications Assay Min. 99.9 % Color (APHA) Max. 10 GC-ECD Responsive Residue (as Heptachlor Epoxide) Max. 10 ppt Fluorescence Background (as Quinine Sulfate) Max. 1 ppb Residue after Evaporation Max. 1 ppm Water Max. 0.05 % Optical Absorbance at 205 nm Max. 1.00 220 nm Max. 0.30 230 nm Max. 0.15 254 nm Max. 0.02 280 nm Max. 0.01 350 nm Max. 0.01
packaging product number Unit size case size PA2031-065 1L 1L Amber Glass PA2031-002 1L 6x1L Amber Glass PA2031-048 4L 4L Amber Glass PA2031-001 4L 4x4L Amber Glass
acs pr1490
Meets reagent specifications for testing USP/NF monographs.
specifications Acetone Max. 0.002 % Assay Min. 99.5 % Color (APHA) Max. 10 Propionaldehyde Max. 0.002 % Residue after Evaporation Max. 0.001 % Solubility in Water Passes Test Titrable Acid or Base Max. 0.0001 meq/g Water Max. 0.2 %
packaging product number Unit size case size PR1490-065 1L 1L Amber Glass PR1490-002 1L 6x1L Amber Glass PR1490-008 204L 204L Metal Drum PR1490-007 20L 20L Metal Pail PR1490-073 4L 4L PVC Coated Amber Glass PR1490-048 4L 4L Amber Glass PR1490-006 4L 4x4L PVC Coated Amber Glass PR1490-001 4L 4x4L Amber Glass
acs plUs pr2561
Meets reagent specifications for testing USP/NF monographs.
specifications Carbonyl Compounds (Acetone and Propionaldehyde) Max. 0.002 % Assay Min. 99.5 % Residue after Evaporation Max. 0.001 % Water Max. 0.2 % Color (APHA) Max. 10 Solubility in Water Passes Test Titrable Acid or Base Max. 0.0001 meq/g Tracemetals Aluminum (Al) Max. 0.5 ppm Barium (Ba) Max. 0.1 ppm Boron (B) Max. 0.02 ppm Cadmium (Cd) Max. 0.05 ppm Calcium (Ca) Max. 0.5 ppm Chromium (Cr) Max. 0.02 ppm Cobalt (Co) Max. 0.02 ppm Copper (Cu) Max. 0.02 ppm Iron (Fe) Max. 0.1 ppm Lead (Pb) Max. 0.1 ppm Magnesium (Mg) Max. 0.1 ppm Manganese (Mn) Max. 0.02 ppm Nickel (Ni) Max. 0.02 ppm Tin (Sn) Max. 0.1 ppm Zinc (Zn) Max. 0.1 ppm
packaging product number Unit size case size PR2561-065 1L 1L Amber Glass PR2561-002 1L 6x1L Amber Glass PR2561-048 4L 4L Amber Glass PR2561-001 4L 4x4L Amber Glass
anhydrosolv ph3881
Packaged under Nitrogen in Septum Sealed Bottle
specifications Appearance (clear, colorless liquid) Passes Test Assay Min. 99.5 % Color (APHA) Max. 10 Residue after Evaporation Max. 3 ppm Water Max. 50 ppm
packaging product number Unit size case size PH3881-174 100ml 100ml Amber Glass with Septum Seal PH3881-100 100ml 6x100ml Amber Glass with Septum Seal PH3881-150 1L 6x1L Amber Glass with Septum Seal PH3881-041 1L 1L Amber Glass with Septum Seal
121gc pg2033
For Organic Residue Analysis Packaged under Nitrogen. Submicron filtered.
specifications Assay Min. 99.7 % Residue after Evaporation Max. 5 ppm Water Max. 0.1 % Color (APHA) Max. 10 GC-ECD Halogenated Residue (as Heptachlor Epoxide) Max. 10 ppt GC-FID Responsive Residue (as 2-Octanol) Max. 5 ppb
packaging product number Unit size case size PG2033-065 1L 1L Amber Glass PG2033-002 1L 6x1L Amber Glass PG2033-048 4L 4L Amber Glass PG2033-001 4L 4x4L Amber Glass
histological pr2037
For use in Tissue Sampling and Processing
specifications Assay Min. 99.5 % Color (APHA) Max. 10 Residue after Evaporation Max. 0.001 % Water Max. 0.2 %
packaging product number Unit size case size PR2037-008 204L 204L Metal Drum PR2037-007 20L 20L Metal Pail PR2037-066 4L 4L Poly Bottle PR2037-012 4L 4x4L Poly Bottle
hplc/acs ps3370
For Use in Liquid Chromatography and Spectrophotometry Packaged under Nitrogen. Submicron filtered.
specifications Acetone Max. 0.002 % Assay Min. 99.8 % Color (APHA) Max. 10 Propionaldehyde Max. 0.002 % Residue after Evaporation Max. 5 ppm Solubility in Water Passes Test Titrable Acid or Base Max. 0.0001 meq/g Water Max. 0.10 % Optical Absorbance at 205 nm Max. 1.00 220 nm Max. 0.30 230 nm Max. 0.15 254 nm Max. 0.05 280 nm Max. 0.02 350 nm Max. 0.01
packaging product number Unit size case size PS3370-008 204L 204L Metal Drum
hplc/spectro ps2032
For Use in Liquid Chromatography and Spectrophotometry Packaged under Nitrogen. Submicron filtered.
specifications Assay Min. 99.8 % Color (APHA) Max. 10 Residue after Evaporation Max. 5 ppm Solubility in Water Passes Test Titrable Acid or Base Max. 0.0001 meq/g Water Max. 0.05 % Optical Absorbance at 205 nm Max. 1.00 220 nm Max. 0.30 230 nm Max. 0.15 254 nm Max. 0.02 280 nm Max. 0.01 350 nm Max. 0.01
packaging product number Unit size case size PS2032-065 1L 1L Amber Glass PS2032-002 1L 6x1L Amber Glass PS2032-073 4L 4L PVC Coated Amber Glass PS2032-048 4L 4L Amber Glass PS2032-006 4L 4x4L PVC Coated Amber Glass PS2032-001 4L 4x4L Amber Glass
Usp pU1501
Meets USP Requirements
specifications Assay Min. 99.0 % Identification Passes Test Specific Gravity at 25ºC/25ºC 0.783 - 0.787 Refractive Index at 20ºC 1.376 - 1.378 Acidity Passes Test Limit of Nonvolatile Residue Max. 0.005 %
packaging product number Unit size case size PU1501-048 4L 4L Amber Glass PU1501-001 4L 4x4L Amber Glass
ISOPROPYlbENzENESee Cumene
ISOPROPYl ETHER(DIISOPROPYL ETHER)
[(CH3)
2CH]
2O FW 102.18 CAS 108-20-3
BP 68-69°C D 0.725 Merck Index 13,5232 FP -12°C NFPA 1-3-1 Storage Code: RED IMO Diisopropyl Ether, 3, UN1159, PG II
Iso-
122ISOPROPYl ETHER(CONTINUED)
acs ir0980
Stabilized
specifications Assay Min. 99.0 % Color (APHA) Max. 25 Peroxides (as Isopropyl Peroxide, at time of packaging) Max. 0.05 % Residue after Evaporation Max. 0.01 % Titrable Acid Max. 0.0007 meq/g
packaging product number Unit size case size IR0980-065 1L 1L Amber Glass IR0980-002 1L 6x1L Amber Glass IR0980-048 4L 4L Amber Glass IR0980-001 4L 4x4L Amber Glass
KARl FISCHER REAGENT Contains Ingredients: Ethylene Glycol Monomethyl Ether CAS 109-86-4 Pyridine CAS 110-86-1 Iodine CAS 7553-56-2 Sulfur Dioxide CAS 7664-09-5 NFPA 2-2-0 Storage Code: RED IMO Flammable Liquid N.O.S. (Ethylene Glycol Monomethyl Ether, Pyridine), 3, UN1993, PG III
blend kr1120
For Volumetric Karl Fischer Titrations Stabilizer With Pyridine
specifications Appearance (Dark-Iodine Color Solution) Passes Test Dilution Test Passes Test Equivalence (mg H2O/mL) Min. 6.0
packaging product number Unit size case size KR1120-065 1L 1L Amber Glass KR1120-002 1L 6x1L Amber Glass KR1120-048 4L 4L Amber Glass KR1120-001 4L 4x4L Amber Glass KR1120-053 500ml 500ml Amber Glass KR1120-013 500ml 6x500ml Amber Glass
KARl FISCHER REAGENT bUFFER SOlUTION Contains Ingredients: Methyl Alcohol CAS 67-56-1 Non-Toxic Proprietary Amine Sulfur Dioxide CAS 7553-56-2 Iodine CAS 7446-09-5 NFPA 3-3-1
Storage Code: RED IMO Flammable Liquid N.O.S. (Methanol, Sulfur Dioxide), 3, PG II
aQUapoint kr4400
Stabilizing Solvent for Water Content of Strong Acids and Bases. Buffer Capacity; 5 mmole/ml Pyridine-free
packaging product number Unit size case size KR4400-053 500ml 500ml Amber Glass KR4400-013 500ml 6x500ml Amber Glass
KARl FISCHER REAGENT COMPOSITE 2 Contains Ingredients: Ethylene Glycol Monomethyl Ether CAS 109-86-4 Non-Toxic Proprietary Amine Sulfur Dioxide CAS 7446-09-5 Iodine CAS 7553-56-2 NFPA 3-1-2 Storage Code: RED IMO Flammable Liquid N.O.S. (Ethylene Glycol Monomethyl Ether, Sulfur Dioxide), 3, PG III
aQUapoint kr4406
For Volumetric Karl Fischer Titrations One Component Pyridine-free
specifications Equivalence (mg H2O/mL) Min. 2.0 Suitability Test Passes Test
packaging product number Unit size case size KR4406-065 1L 1L Amber Glass KR4406-002 1L 6x1L Amber Glass KR4406-059 2.5L 2.5L Amber Glass KR4406-014 2.5L 4x2.5L Amber Glass
KARl FISCHER REAGENT COMPOSITE 5 Contains Ingredients: Ethylene Glycol Monomethyl Ether CAS 109-86-4 Non-Toxic Proprietary Amine Sulfur Dioxide CAS 7553-56-2 Iodine CAS 7446-09-5 NFPA 3-1-2 Storage Code: RED IMO Flammable Liquid N.O.S. (Ethylene Glycol Monomethyl Ether, Sulfur Dioxide), 3, PG III
aQUapoint kr4408
For Volumetric Karl Fischer Titrations One Component Pyridine-free
123 specifications Suitability Test Passes Test Equivalence (mg H2O/mL) Min. 5.0
packaging product number Unit size case size KR4408-065 1L 1L Amber Glass KR4408-002 1L 6x1L Amber Glass KR4408-059 2.5L 2.5L Amber Glass KR4408-014 2.5L 4x2.5L Amber Glass
KARl FISCHER REAGENT COMPOSITE 5K Contains Ingredients: Diethylene Glycol Monomethyl Ether CAS 111-90-0 Imidazole CAS 288-32-4 Iodine CAS 7553-56-2 Sulfur Dioxide CAS 7664-09-5 NFPA 3-1-2 Storage Code: WHITE IMO Flammable Liquid N.O.S. (Diethylene Glycol Monomethyl Ether, Imidazole, Sulfur Dioxide), PG III
aQUapoint kr4410
For Volumetric Karl Fischer Titrations of Aldehydes and Ketones One Component Pyridine-free
specifications Equivalence (mg H2O/mL) Min. 5.0
packaging product number Unit size case size KR4410-065 1L 1L Amber Glass KR4410-002 1L 6x1L Amber Glass KR4410-053 500ml 500ml Amber Glass KR4410-013 500ml 6x500ml Amber Glass
KARl FISCHER REAGENT SOlvENT C2 Contains Ingredients: Methyl Alcohol CAS 67-56-1 Non-Toxic Proprietary Amine Sulfur Dioxide CAS 7553-56-2 Iodine CAS 7446-09-5 NFPA 3-3-1 Storage Code: RED IMO Flammable Liquid N.O.S. (Methanol, Sulfur Dioxide), 3, PG II
aQUapoint kr4414
Solvent for Volumetric Karl Fischer Titrations. For use with Two Component Reagents Pyridine-free.
specifications Suitability Test Passes Test Sensitivity Test Passes Test
packaging product number Unit size case size KR4414-065 1L 1L Amber Glass KR4414-002 1L 6x1L Amber Glass KR4414-059 2.5L 2.5L Amber Glass KR4414-014 2.5L 4x2.5L Amber Glass
KARl FISCHER REAGENT SOlvENT K1 Contains Ingredients: Chloroform CAS 67-66-3 2-Chloroethanol CAS 107-07-3 NFPA 3-2-2 Storage Code: BLUE IMO Toxic Liquid N.O.S. (Chloroform, 2-Chloroethanol), PG I
aQUapoint kr4416
Solvent for Titrations of Aldehydes and Ketones. For use with Karl Fischer Reagent Composite 5K Pyridine-free
specifications Suitability Test Passes Test Sensitivity Test Passes Test
packaging product number Unit size case size KR4416-065 1L 1L Amber Glass KR4416-002 1L 6x1L Amber Glass
KARl FISCHER REAGENT SOlvENT OIlS Contains Ingredients: Methyl Alcohol CAS 67-56-1 Chloroform CAS 67-66-3 Non-toxic proprietary amine Sulfur Dioxide CAS 7446-09-5 NFPA 3-2-0 Storage Code: RED IMO Flammable Liquid N.O.S. (Methanol, Chloroform, Sulfur Dioxide), 3, PG III
aQUapoint kr4418
Solvent for Volumetric Karl Fischer Titration for Oils. For use with Two Component Reagents. Free from Halogenated Hydrocarbons Pyridine-free
specifications Suitability Test Passes Test Sensitivity Test Passes Test
packaging product number Unit size case size KR4418-065 1L 1L Amber Glass KR4418-002 1L 6x1L Amber Glass
Iso-Kar
124KARl FISCHER REAGENT SOlvENT OIlS AND FATS Contains: Methyl Alcohol CAS 67-66-3 Chloroform CAS 7446-09-5 Non-Toxic Proprietary Amine Sulfur Dioxide CAS 67-56-1 NFPA 3-2-0 Storage Code: RED IMO Flammable Liquid N.O.S. (Methanol, Chloroform, Sulfur Dioxide), 3, PG II
aQUapoint kr4420
Solvent for Volumetric Karl Fischer Titration for Oils and Fats. For use with Two Component Reagents Pyridine-free
specifications Suitability Test Passes Test Sensitivity Test Passes Test
packaging product number Unit size case size KR4420-065 1L 1L Amber Glass KR4420-002 1L 6x1L Amber Glass KR4420-059 2.5L 2.5L Amber Glass KR4420-014 2.5L 4x2.5L Amber Glass
KARl FISCHER REAGENT TITRANT 2 Contains Ingredients: xylene CAS 1330-20-7 Iodide CAS 7553-56-2 NFPA 2-3-1 Storage Code: RED IMO Flammable Liquid N.O.S. (xylenes, Iodine), 3, PG III
aQUapoint kr4426
For Volumetric Karl Fischer Titrations. Two Component Pyridine-free
specifications Equivalence (mg H2O/mL) Min. 5.0
packaging product number Unit size case size KR4426-065 1L 1L Amber Glass KR4426-002 1L 6x1L Amber Glass KR4426-059 2.5L 2.5L Amber Glass KR4426-014 2.5L 4x2.5L Amber Glass
KARl FISCHER REAGENT TITRANT 5 Contains: xylene CAS 1330-20-7 Iodide CAS 7553-56-2 NFPA 2-3-1
Storage Code: RED IMO Flammable Liquid N.O.S. (xylenes, Iodine), 3, PG III
aQUapoint kr4428
For Volumetric Karl Fischer Titrations. Two Component Pyridine-free
specifications Equivalence (mg H2O/mL) Min. 5.0
packaging product number Unit size case size KR4428-065 1L 1L Amber Glass KR4428-002 1L 6x1L Amber Glass KR4428-059 2.5L 2.5L Amber Glass KR4428-014 2.5L 4x2.5L Amber Glass
lACTIC ACID CH
3CH(OH)CO
2H FW 90.08 CAS 50-21-5
D 1.209 Merck Index 13,5215 FP 110°C NFPA 2-0-0 Storage Code: WHITE IMO Corrosive Liquid, Acidic, Organic N.O.S. (Lactic Acid), 8, UN3265, PG III
acs lr1205
specifications Assay 85.0 - 90.0 % Chloride (Cl) Max. 0.001 % Heavy Metals (as Pb) Max. 5 ppm Iron (Fe) Max. 5 ppm Residue after Ignition Max. 0.02 % Substances Darkened by Sulfuric Acid Passes Test Sulfate Max. 0.002 %
packaging product number Unit size case size LR1205-065 1L 1L Amber Glass LR1205-002 1L 6x1L Amber Glass LR1205-048 4L 4L Amber Glass LR1205-001 4L 4x4L Amber Glass
lAURYl AlCOHOlSee 1-Dodecanol
lIqUID PETROlATUMSee Mineral Oil
2,6-lUTIDINE(2,6-DIMETHYLPYRIDINE)
C5H
3N(CH
3)
2 FW 107.15 CAS 108-48-5
MP -6°C BP 144°C D 0.92 Merck Index 13,5636 FP 33°C NFPA 2-3-0 Storage Code: RED IMO Flammable Liquid, Toxic N.O.S. (Contains 2,6-Lutidine), 3, UN1992, PG III
125 certified lr4550
specifications Assay Min. 98.0 %
packaging product number Unit size case size LR4550-065 1L 1L Amber Glass LR4550-002 1L 6x1L Amber Glass LR4550-053 500ml 500ml Amber Glass LR4550-013 500ml 6x500ml Amber Glass
MESITYlENESee 1,3,5-Trimethylbenzene
METHANOlSee Methyl Alcohol
2-METHOxYETHANOlSee Ethylene Glycol Monomethyl Ether
2-METHOxYETHYl ACETATESee Ethylene Glycol Monomethyl Ether Acetate
1-METHOxY-2-propanolSee Propylene Glycol Monomethyl Ether
1-METHOxY-2-propyl ACETATESee Propylene Glycol Monomethyl Ether Acetate
METHYl ACETATE CH
3CO
2CH
3 FW 74.08 CAS 79-20-9
MP -98°C BP 57.5°C D 0.932 Merck Index 13,6038 FP -9°C NFPA 1-3-0 Storage Code: RED IMO Methyl Acetate, 3, UN1231, PG II
certified Mr1269
specifications Assay Min. 99.0 %
packaging product number Unit size case size MR1269-065 1L 1L Amber Glass MR1269-002 1L 6x1L Amber Glass MR1269-048 4L 4L Amber Glass MR1269-001 4L 4x4L Amber Glass
METHYl AlCOHOl(METHANOL)
CH3OH FW 32.04 CAS 67-56-1
MP -98°C BP 64.7°C D 0.791 Merck Index 13,5984 FP 11°C NFPA 1-3-0 Storage Code: RED IMO Methanol, 3 (6.1), UN1230, PG II
physical properties Boiling Point (760mm) 64.7°C Density (g/ml) at 25°C 0.791 Dielectric Constant at 25°C 32.7 Elutropic Value (Silica) 0.73 Refractive Index (n20°/D) 1.329 Viscosity (cps) at 20°C 0.6
absolv Ma1921
For Use in Liquid Chromatography, Spectrophotometry, and for Organic Residue Analysis Packaged under Nitrogen.
specifications Assay Min. 99.9 % Color (APHA) Max. 5 GC-ECD Responsive Residue (as Heptachlor Epoxide) Max. 10 ppt GC-FID Responsive Residue (as 2-Octanol) Max. 5 ppb Fluorescence Background (as Quinine Sulfate) Max. 1 ppb LC Gradient Elution Suitability Passes Test Residue after Evaporation Max. 1 ppm Water Max. 0.05 % Optical Absorbance at 205 nm Max. 1.00 220 nm Max. 0.25 230 nm Max. 0.12 240 nm Max. 0.05 254 nm Max. 0.01 280 nm Max. 0.005 400 nm Max. 0.005
packaging product number Unit size case size MA1921-065 1L 1L Amber Glass MA1921-002 1L 6x1L Amber Glass MA1921-048 4L 4L Amber Glass MA1921-001 4L 4x4L Amber Glass
Kar-Met
126METHYl AlCOHOl(CONTINUED)
acs Mr1272
Meets reagent specifications for testing USP/NF monographs.
specifications Acetaldehyde Max. 0.001 % Acetone Max. 0.001 % Appearance (clear, colorless liquid) Passes Test Assay Min. 99.8 % Color (APHA) Max. 10 Formaldehyde Max. 0.001 % Residue after Evaporation Max. 10 ppm Solubility in Water Passes Test Substances Darkened by Sulfuric Acid Passes Test Substances Reducing Permanganate Passes Test Titrable Acid Max. 0.0003 meq/g Titrable Base Max. 0.0002 meq/g Water Max. 0.1 %
packaging product number Unit size case size MR1272-065 1L 1L Amber Glass MR1272-002 1L 6x1L Amber Glass MR1272-008 204L 204L Metal Drum MR1272-007 20L 20L Metal Pail MR1272-073 4L 4L PVC Coated Amber Glass MR1272-048 4L 4L Amber Glass MR1272-006 4L 4x4L PVC Coated Amber Glass MR1272-001 4L 4x4L Amber Glass
acs plUs Mr2565
Meets reagent specifications for testing USP/NF monographs.
specifications Appearance Clear Carbonyl Compounds (as Formaldehyde) Max. 0.001 % Carbonyl Compounds (Acetone) Max. 0.001 % Carbonyl Compounds (Acetaldehyde) Max. 0.001 % Assay Min. 99.8 % Residue after Evaporation Max. 0.001 % Water Max. 0.1 % Color (APHA) Max. 10 Solubility in Water Passes Test Substances Darkened by H
2SO
5 Passes Test
Substances Reducing Permanganate Passes Test Titrable Acid Max. 0.0003 meq/g Titrable Base Max. 0.0002 meq/g Tracemetals Aluminum (Al) Max. 0.5 ppm Barium (Ba) Max. 0.1 ppm Boron (B) Max. 0.02 ppm Cadmium (Cd) Max. 0.05 ppm
Calcium (Ca) Max. 0.5 ppm Chromium (Cr) Max. 0.02 ppm Cobalt (Co) Max. 0.02 ppm Copper (Cu) Max. 0.02 ppm Iron (Fe) Max. 0.1 ppm Lead (Pb) Max. 0.1 ppm Magnesium (Mg) Max. 0.1 ppm Manganese (Mn) Max. 0.02 ppm Nickel (Ni) Max. 0.02 ppm Tin (Sn) Max. 0.1 ppm Zinc (Zn) Max. 0.1 ppm
packaging product number Unit size case size MR2565-065 1L 1L Amber Glass MR2565-002 1L 6x1L Amber Glass MR2565-048 4L 4L Amber Glass MR2565-001 4L 4x4L Amber Glass
anhydrosolv Mh3887
Packaged under Nitrogen in Septum Sealed Bottle
specifications Assay Min. 99.8 % Residue after Evaporation Max. 3 ppm Water Max. 20 ppm
packaging product number Unit size case size MH3887-174 100ml 100ml Amber Glass with Septum Seal MH3887-100 100ml 6x100ml Amber Glass with Septum Seal MH3887-150 1L 6x1L Amber Glass with Septum Seal MH3887-139 1L 6x1L Amber Glass with Molecular Sieve MH3887-137 1L 1L Amber Glass with Molecular Sieve MH3887-041 1L 1L Amber Glass with Septum Seal
bio Mb1920
For Biotech Applications Packaged under Nitrogen. Submicron filtered.
specifications Acetone Max. 0.001 % Assay Min. 99.9 % Color (APHA) Max. 10 Residue after Evaporation Max. 2 ppm Titrable Acid Max. 0.0003 meq/g Titrable Base Max. 0.0002 meq/g Water Max. 0.03 % Optical Absorbance at 205 nm Max. 1.00 220 nm Max. 0.25 240 nm Max. 0.05 254 nm Max. 0.01 280 nm Max. 0.005 400 nm Max. 0.005
127 packaging product number Unit size case size MB1920-048 4L 4L Amber Glass MB1920-001 4L 4x4L Amber Glass
gc Mg2826
For Organic Residue Analysis Packaged under Nitrogen.
specifications Assay Min. 99.9 % Color (APHA) Max. 10 GC-ECD Responsive Residue (as Heptachlor Epoxide) Max. 10 ppt GC-FID Responsive Residue (as 2-Octanol) Max. 5 ppb Residue after Evaporation Max. 1 ppm Water Max. 0.05 %
packaging product number Unit size case size MG2826-065 1L 1L Amber Glass MG2826-002 1L 6x1L Amber Glass MG2826-048 4L 4L Amber Glass MG2826-001 4L 4x4L Amber Glass
histological Mr1268
For use in Tissue Sampling and Processing
specifications Assay Min. 99.5 % Color (APHA) Max. 10 Residue after Evaporation Max. 0.001 % Water Max. 0.2 %
packaging product number Unit size case size MR1268-008 204L 204L Metal Drum MR1268-031 20L 20L Poly Pail MR1268-048 4L 4L Amber Glass MR1268-012 4L 4x4L Poly Bottle
hplc/acs Ms3350
For Use in Liquid Chromatography and Spectrophotometry Packaged under Nitrogen. Submicron filtered.
specifications Acetaldehyde Max. 0.001 % Acetone Max. 0.001 % Appearance Passes Test Assay Min. 99.9 % Color (APHA) Max. 10 Formaldehyde Max. 0.001 % Residue after Evaporation Max. 5 ppm Solubility in Water Passes Test Substances Darkened by Sulfuric Acid Passes Test Substances Reducing Permanganate Passes Test Titrable Acid Max. 0.0003 meq/g Titrable Base Max. 0.0002 meq/g Water Max. 0.10 %
Optical Absorbance at 205 nm Max. 1.00 220 nm Max. 0.25 240 nm Max. 0.10 250 nm Max. 0.02 280 nm Max. 0.01 400 nm Max. 0.01
packaging product number Unit size case size MS3350-008 204L 204L Metal Drum
hplc/spectro Ms1922
For Use in Liquid Chromatography and Spectrophotometry Packaged under Nitrogen. Submicron filtered. Also meets ACS specifications.
specifications Acetaldehyde Max. 0.001 % Acetone Max. 0.001 % Appearance (clear, colorless liquid) Passes Test Assay Min. 99.9 % Color (APHA) Max. 10 Formaldehyde Max. 0.001 % LC Gradient Elution Suitability Passes Test Residue after Evaporation Max. 2 ppm Solubility in Water Passes Test Substances Darkened by Sulfuric Acid Passes Test Substances Reducing Permanganate Passes Test Titrable Acid Max. 0.0003 meq/g Titrable Base Max. 0.0002 meq/g Water Max. 0.05 % Optical Absorbance at 205 nm Max. 1.00 220 nm Max. 0.25 240 nm Max. 0.05 254 nm Max. 0.01 280 nm Max. 0.005 400 nm Max. 0.005
packaging product number Unit size case size MS1922-065 1L 1L Amber Glass MS1922-002 1L 6x1L Amber Glass MS1922-073 4L 4L PVC Coated Amber Glass MS1922-048 4L 4L Amber Glass MS1922-006 4L 4x4L PVC Coated Amber Glass MS1922-001 4L 4x4L Amber Glass
Met-
128METHYl AlCOHOl(CONTINUED)
lc/Ms Ml1919
For LC/MS applications.
specifications Assay Min. 99.9% Residue after Evaporation Max. 1 ppm Water Max. 0.02% LC Gradient Suitability at 254 and 220nm Passes Test Titratable acid, mEQ/g Max. 0.0003 Titratable base, mEQ/g Max. 0.0002 LCMS Gradient Suitability Passes Test LCMS at Positive Mode as Reserpine Max. 50 ppb LCMS at Negative Mode as Aldicarb Max. 50 ppb Optical Absorbance at 210 nm Max. 0.50 214 nm Max. 0.40 220 nm Max. 0.20 230 nm Max. 0.10 254 nm Max. 0.01 260 nm Max. 0.005 280 nm Max. 0.005 Tracemetals Aluminum (Al) Max. 10 ppb Barium (Ba) Max. 10 ppb Cadmium (Cd) Max. 10 ppb Calcium (Ca) Max. 20 ppb Chromium (Cr) Max. 10 ppb Cobalt (Co) Max. 10 ppb Copper (Cu) Max. 10 ppb Iron (Fe) Max. 10 ppb Lead (Pb) Max. 10 ppb Magnesium (Mg) Max. 10 ppb Manganese (Mn) Max. 10 ppb Nickel (Ni) Max. 10 ppb Potassium (K) Max. 10 ppb Silver (Ag) Max. 10 ppb Sodium (Na) Max. 20 ppb Tin (Sn) Max. 10 ppb Zinc (Zn) Max. 10 ppb
packaging product number Unit size case size ML1919-065 1L 1L Amber Glass ML1919-002 1L 6x1L Amber Glass ML1919-048 4L 4L Amber Glass ML1919-001 4L 4x4L Amber Glass
pUrge&trap Mp1924
Packaged under Nitrogen.
specifications Assay Min. 99.9 % Color (APHA) Max. 10 Titrable Acid Max. 0.0003 meq/g Titrable Base Max. 0.0002 meq/g
Volatile impurities (P&T), Methyl ethyl ketone Max. 0.1 ppm Volatile impurities (P&T), Other organics Max. 0.1 ppm
packaging product number Unit size case size MP1924-065 1L 1L Amber Glass MP1924-002 1L 6x1L Amber Glass
aQUapoint Mr1274
Solvent For Volumetric Karl Fischer Titration
specifications Acetaldehyde Max. 0.001 % Acetone Max. 0.001 % Appearance (clear, colorless liquid) Passes Test Assay Min. 99.8 % Color (APHA) Max. 10 Formaldehyde Max. 0.001 % Residue after Evaporation Max. 0.001 % Solubility in Water Passes Test Substances Darkened by Sulfuric Acid Passes Test Substances Reducing Permanganate Passes Test Titrable Acid Max. 0.0003 meq/g Titrable Base Max. 0.0002 meq/g Water Max. 100 ppm
packaging product number Unit size case size MR1274-065 1L 1L Amber Glass MR1274-002 1L 6x1L Amber Glass MR1274-048 4L 4L Amber Glass MR1274-001 4L 4x4L Amber Glass
anhydrosolv Mh3887
Packaged under Nitrogen in Septum Sealed Bottle
specifications Assay Min. 99.8 % Residue after Evaporation Max. 3 ppm Water Max. 20 ppm
packaging product number Unit size case size MH3887-174 100ml 100ml Amber Glass with Septum Seal MH3887-100 100ml 6x100ml Amber Glass with Septum Seal MH3887-150 1L 6x1L Amber Glass with Septum Seal MH3887-139 1L 6x1L Amber Glass with Molecular Sieve MH3887-137 1L 1L Amber Glass with Molecular Sieve MH3887-041 1L 1L Amber Glass with Septum Seal
1292-METHYl-2-bUTANOlSee tert-Amyl Alchohl
3-METHYl-1-bUTANOlSee Isoamyl Alchohol
METHYl CEllOSOlvESee 2-Methoxyethanol and Ethylene Glycol Monomethyl Ether
METHYl CYANIDESee Acetonitrile
METHYl ETHYl KETONE(2-BUTANONE, ETHYL METHYL KETONE)
C2H
5COCH
3 FW 72.11 CAS 78-93-3
MP -87°C BP 80°C D 0.805 Merck Index 13,6097 FP -3°C NFPA 1-3-0 Storage Code: RED IMO Ethyl Methyl Ketone, 3, UN1193, PG II
physical properties Boiling Point (760mm) 80°C Density (g/ml) at 25°C 0.805 Dielectric Constant at 20°C 18.51 Elutropic Value (Silica) 0.39 Refractive Index (n20°/D) 1.379 Viscosity (cps) at 20°C 0.4 0.4
acs Mr1275
Meets reagent specifications for testing USP/NF monographs.
specifications Assay Min. 99.0 % Color (APHA) Max. 15 Residue after Evaporation Max. 0.0025 % Titrable Acid Max. 0.0005 meq/g Water Max. 0.20 %
packaging product number Unit size case size MR1275-065 1L 1L Amber Glass MR1275-002 1L 6x1L Amber Glass MR1275-008 204L 204L Metal Drum MR1275-007 20L 20L Metal Pail MR1275-048 4L 4L Amber Glass MR1275-001 4L 4x4L Amber Glass
acs plUs Mr2571
Meets reagent specifications for testing USP/NF monographs.
specifications Assay Min. 99.0 % Residue after Evaporation Max. 0.003 % Water Max. 0.2 % Color (APHA) Max. 15
Titrable Acid Max. 0.0005 meq/g Tracemetals Aluminum (Al) Max. 0.5 ppm Barium (Ba) Max. 0.1 ppm Boron (B) Max. 0.02 ppm Cadmium (Cd) Max. 0.05 ppm Calcium (Ca) Max. 0.5 ppm Chromium (Cr) Max. 0.02 ppm Cobalt (Co) Max. 0.02 ppm Copper (Cu) Max. 0.02 ppm Iron (Fe) Max. 0.1 ppm Lead (Pb) Max. 0.1 ppm Magnesium (Mg) Max. 0.1 ppm Manganese (Mn) Max. 0.02 ppm Nickel (Ni) Max. 0.02 ppm Tin (Sn) Max. 0.1 ppm Zinc (Zn) Max. 0.1 ppm
packaging product number Unit size case size MR2571-065 1L 1L Amber Glass MR2571-002 1L 6x1L Amber Glass MR2571-048 4L 4L Amber Glass MR2571-001 4L 4x4L Amber Glass
hplc/spectro Ms1931
For Use in Liquid Chromatography and Spectrophotometry Packaged under Nitrogen. Submicron filtered.
specifications Assay Min. 99.5 % Color (APHA) Max. 10 Residue after Evaporation Max. 5 ppm Water Max. 0.08 % Optical Absorbance at 329 nm Max. 1.00 335 nm Max. 0.50 344 nm Max. 0.05 350 nm Max. 0.01 400 nm Max. 0.01
packaging product number Unit size case size MS1931-065 1L 1L Amber Glass MS1931-002 1L 6x1L Amber Glass MS1931-048 4L 4L Amber Glass MS1931-001 4L 4x4L Amber Glass
Met-
130METHYl FORMATE HCO
2CH
3 FW 60.05 CAS 107-31-3
MP -100°C BP 34°C D 0.974 Merck Index 13,6101 FP -26°C NFPA 2-4-0 Storage Code: RED IMO Methyl Formate, 3, UN1243, PG I
physical properties Boiling Point (760mm) 34°C Density (g/ml) at 25°C 0.974 Refractive Index (n20°/D) 1.343
certified Mr1277
specifications Assay Min. 97.0 % Methyl Alcohol Max. 3.0 % Water Max. 0.05 %
packaging product number Unit size case size MR1277-065 1L 1L Amber Glass MR1277-002 1L 6x1L Amber Glass
spectro Ms1941
Packaged under Nitrogen.
specifications Assay Min. 99.0 % Color (APHA) Max. 10 Residue after Evaporation Max. 5 ppm Water Max. 0.03 % Optical Absorbance at 259 nm Max. 1.00 260 nm Max. 0.70 265 nm Max. 0.20 270 nm Max. 0.04 310 nm Max. 0.01 400 nm Max. 0.01
packaging product number Unit size case size MS1941-065 1L 1L Amber Glass MS1941-002 1L 6x1L Amber Glass
5-METHYl-2-HExANONESee Methyl Isoamyl Ketone
METHYl iso-AMYl KETONE(5-METHYL-2-hexanone)
(CH3)
2CHCH
2CH
2COCH
3
FW 114.19 CAS 110-12-3 BP 145°C D 0.888 FP 41°C NFPA 1-2-0 Storage Code: RED IMO 5-Methylhexan-2-one, UN2302, PG III
physical properties Boiling Range (760mm) 117-118°C Density (g/ml) at 25°C 0.801 Dielectric Constant at 25°C 13.11 Refractive Index (n20°/D) 1.396
certified Mr4104
specifications Assay Min. 99.0 % Color (APHA) Max. 10 Water Max. 0.05 %
packaging product number Unit size case size MR4104-065 1L 1L Amber Glass MR4104-002 1L 6x1L Amber Glass MR4104-048 4L 4L Amber Glass MR4104-001 4L 4x4L Amber Glass
METHYl iso-PENTYl KETONESee Methyl Isoamyl Ketone
METHYl ISObUTYl KETONE(4-METHYL-2-PENTANONE)
(CH3)
2CHCH
2COCH
3 FW 100.16 CAS 108-10-1
MP -80°C BP 117-118°C D 0.801 Merck Index 13,5227 FP 13°C NFPA 2-3-1 Storage Code: RED IMO Methyl Isobutyl Ketone, 3, UN1245, PG I
physical properties Boiling Range (760mm) 117-118°C Density (g/ml) at 25°C 0.801 Dielectric Constant at 25°C 13.11 Refractive Index (n20°/D) 1.396
acs Mr1279
Meets reagent specifications for testing USP/NF monographs.
specifications Appearance Passes Test Assay Min. 98.5 % Color (APHA) Max. 15 Residue after Evaporation Max. 0.005 % Titrable Acid Max. 0.002 meq/g Water Max. 0.1 %
packaging product number Unit size case size MR1279-065 1L 1L Amber Glass MR1279-002 1L 6x1L Amber Glass MR1279-007 20L 20L Metal Pail MR1279-048 4L 4L Amber Glass MR1279-001 4L 4x4L Amber Glass
131acs plUs Mr2576
Meets reagent specifications for testing USP/NF monographs.
specifications Appearance Clear Assay Min. 98.5 % Residue after Evaporation Max. 0.01 % Color (APHA) Max. 15 Titrable Acid 0.002 meq/g Tracemetals Aluminum (Al) Max. 0.5 ppm Barium (Ba) Max. 0.1 ppm Boron (B) Max. 0.02 ppm Cadmium (Cd) Max. 0.05 ppm Calcium (Ca) Max. 0.5 ppm Chromium (Cr) Max. 0.02 ppm Cobalt (Co) Max. 0.02 ppm Copper (Cu) Max. 0.02 ppm Iron (Fe) Max. 0.1 ppm Lead (Pb) Max. 0.1 ppm Magnesium (Mg) Max. 0.1 ppm Manganese (Mn) Max. 0.02 ppm Nickel (Ni) Max. 0.02 ppm Tin (Sn) Max. 0.1 ppm Zinc (Zn) Max. 0.1 ppm
packaging product number Unit size case size MR2576-065 1L 1L Amber Glass MR2576-002 1L 6x1L Amber Glass MR2576-048 4L 4L Amber Glass MR2576-001 4L 4x4L Amber Glass
hplc/spectro Ms1951
For Use in Liquid Chromatography and Spectrophotometry Packaged under Nitrogen. Submicron filtered.
specifications Assay Min. 99.0 % Color (APHA) Max. 10 Residue after Evaporation Max. 5 ppm Water Max. 0.08 % Optical Absorbance at 334 nm Max. 1.00 340 nm Max. 0.50 350 nm Max. 0.25 360 nm Max. 0.15 400 nm Max. 0.01
packaging product number Unit size case size MS1951-065 1L 1L Amber Glass MS1951-002 1L 6x1L Amber Glass MS1951-048 4L 4L Amber Glass MS1951-001 4L 4x4L Amber Glass
nf MU1952
Meets NF Requirements
specifications Identification Passes Test Specific Gravity at 25°/25°C Max. 0.799 Distilling range 114 - 117 ºC Acidity Passes Test Limit of Nonvolatile Residue Max. 0.002 % Assay Min. 99 %
packaging product number Unit size case size MU1952-048 4L 4L Amber Glass MU1952-001 4L 4x4L Amber Glass
METHYl ISOPROPYl KETONESee 3-Methyl-2-butanone
METHYl METHACRYlATE H
2C=C(CH
3)CO
2CH
3 FW 100.12 CAS 80-62-6
MP -48°C BP 100°C D 0.936 Merck Index 13,5967 FP 10°C NFPA 2-3-2 Storage Code: RED IMO Methyl Methacrylate Monomer, Stabilized, 3, UN1247, PG II
certified Mr1280
Stabilized with Hydroquinone
specifications Assay Min. 99.0 %
packaging product number Unit size case size MR1280-065 1L 1L Amber Glass MR1280-002 1L 6x1L Amber Glass MR1280-048 4L 4L Amber Glass MR1280-001 4L 4x4L Amber Glass
4-METHYl-2-PENTANONESee Methyl Isobutyl Ketone
METHYl PENTYl KETONESee Acetophenone
2-METHYl-1-PROPANOlSee Isobutyl Alcohol
2-METHYl-2-PROPANOlSee tert-Butyl Alcohol
Met-
132METHYl PROPYl KETONE(2-PENTANONE) CH
3CH
2CH
2COCH
3 FW 86.13 CAS 107-87-9
MP -78°C BP 100-110°C D 0.802 Merck Index 13,6137 FP 7°C NFPA 2-3-0 Storage Code: RED IMO Methyl Propyl Ketone, 3, UN1249, PG II
certified Mr1281
Meets reagent specifications for testing USP/NF monographs.
specifications Assay Min. 90.0 % Methyl Isobutyl Ketone Max. 10.0 Water Max. 0.10 %
packaging product number Unit size case size MR1281-065 1L 1L Amber Glass MR1281-002 1L 6x1L Amber Glass
MR1281-048 4L 4L Amber Glass MR1281-001 4L 4x4L Amber Glass
METHYl t-bUTYl ETHER(tert-BUTYL METHYL ETHER)
(CH3)
3COCH
3 FW 88.15 CAS 1634-04-4
BP 55-56°C D 0.740 Merck Index 13,6059 FP-32°C NFPA 1-3-0 Storage Code: RED IMO Methyl Butyl Ether, 3, UN2398, PG II
physical properties Boiling Range (760mm) 55-56°C Density (g/ml) at 25°C 0.74 Elutropic Value (Silica) 0.29 Refractive Index (n20°/D) 1.3692 Viscosity (cps) at 20°C 0.27
absolv Ma1970
For Use in Liquid Chromatography, Spectrophotometry, and for Organic Residue Analysis Packaged under Nitrogen.
specifications Assay Min. 99.9 % Color (APHA) Max. 10 GC-ECD Responsive Residue (as Heptachlor Epoxide) Max. 10 ppt Fluorescence at 450 nm (as Quinine) Max. 1 ppb Peroxides (as Hydrogen Peroxide, at time of packaging) Max. 1 ppm Residue after Evaporation Max. 1 ppm Water Max. 0.05 % Optical Absorbance at 210 nm Max. 1.00 225 nm Max. 0.50 250 nm Max. 0.10
270 nm Max. 0.01 300 nm Max. 0.01
packaging product number Unit size case size MA1970-065 1L 1L Amber Glass MA1970-002 1L 6x1L Amber Glass MA1970-048 4L 4L Amber Glass MA1970-001 4L 4x4L Amber Glass
acs Mr4108
specifications Assay Min. 99.0 % Color (APHA) Max. 10 Peroxides (as Hydrogen Peroxide, at time of packaging) Max. 1 ppm Residue after Evaporation Max. 0.001 % Water Max. 0.05 %
packaging product number Unit size case size MR4108-065 1L 1L Amber Glass MR4108-002 1L 6x1L Amber Glass MR4108-007 20L 20L Metal Pail MR4108-073 4L 4L PVC Coated Amber Glass MR4108-048 4L 4L Amber Glass MR4108-006 4L 4x4L PVC Coated Amber Glass MR4108-001 4L 4x4L Amber Glass
acs plUs Mr2568
specifications Assay Min. 99.0 % Residue after Evaporation Max. 0.001 % Water Max. 0.05 % Color (APHA) Max. 10 Peroxide (as H2O2) Max. 1 ppm Tracemetals Aluminum (Al) Max. 0.5 ppm Barium (Ba) Max. 0.1 ppm Boron (B) Max. 0.02 ppm Cadmium (Cd) Max. 0.05 ppm Calcium (Ca) Max. 0.5 ppm Chromium (Cr) Max. 0.02 ppm Cobalt (Co) Max. 0.02 ppm Copper (Cu) Max. 0.02 ppm Iron (Fe) Max. 0.1 ppm Lead (Pb) Max. 0.1 ppm Magnesium (Mg) Max. 0.1 ppm Manganese (Mn) Max. 0.02 ppm Nickel (Ni) Max. 0.02 ppm Tin (Sn) Max. 0.1 ppm Zinc (Zn) Max. 0.1 ppm
packaging product number Unit size case size MR2568-065 1L 1L Amber Glass MR2568-002 1L 6x1L Amber Glass
133 MR2568-048 4L 4L Amber Glass MR2568-001 4L 4x4L Amber Glass
gc Mg1972
For Organic Residue Analysis Packaged under Nitrogen.
specifications Assay Min. 99.8 % Residue after Evaporation Max. 2 ppm Water Max. 0.05 % Color (APHA) Max. 10 GC-ECD Halogenated Residue (as Heptachlor Epoxide) Max. 10 ppt GC-FID Responsive Residue (as 2-Octanol) Max. 5 ppb Peroxides (as Hydrogen Peroxide, at time of packaging) Max. 1 ppm
packaging product number Unit size case size MG1972-065 1L 1L Amber Glass MG1972-002 1L 6x1L Amber Glass MG1972-048 4L 4L Amber Glass MG1972-001 4L 4x4L Amber Glass
hplc/spectro Ms1971
For Use in Liquid Chromatography and Spectrophotometry Packaged under Nitrogen. Submicron filtered.
specifications Assay Min. 99.8 % Color (APHA) Max. 10 Peroxides (as Hydrogen Peroxide, at time of packaging) Max. 1 ppm Residue after Evaporation Max. 3 ppm Water Max. 0.05 % Optical Absorbance at 210 nm Max. 1.00 225 nm Max. 0.50 250 nm Max. 0.10 270 nm Max. 0.02 300 nm Max. 0.01
packaging product number Unit size case size MS1971-065 1L 1L Amber Glass MS1971-002 1L 6x1L Amber Glass MS1971-073 4L 4L PVC Coated Amber Glass MS1971-048 4L 4L Amber Glass MS1971-006 4L 4x4L PVC Coated Amber Glass MS1971-001 4L 4x4L Amber Glass
3-METHYl-2-bUTANONE(METHYL ISOPROPYL KETONE)
(CH3)
2CHCOCH
3 FW 86.13 CAS 563-80-4
MP -92°C BP 94-95°C D 0.805 Merck Index 13, 6113 FP 6°C NFPA 2-3-0 Storage Code: RED IMO Ketones, Liquid, N.O.S. (3-Methyl-2-Butanone), UN1224, PG II
certified Mr4103
specifications Assay Min. 99.0 %
packaging product number Unit size case size MR4103-065 1L 1L Amber Glass MR4103-002 1L 6x1L Amber Glass MR4103-048 4L 4L Amber Glass MR4103-001 4L 4x4L Amber Glass
1-METHYl-2-PYRROlIDINONE C
5H
9NO FW 99.13 CAS 872-50-4
MP -24°C BP 81-82°C/10 mm D 1.033 Merck Index 13,6140 FP 86°C NFPA 2-1-0 Storage Code: GREEN
physical properties Boiling Point (10mm) 81-82°C Density (g/ml) at 25°C 1.033 Dielectric Constant at 25°C 32 Refractive Index (n20°/D) 1.47 Viscosity (cps) at 25°C 1.67
acs Mr1282
specifications Assay Min. 99.0 % Chloride (Cl) Max. 1 ppm Color (APHA) Max. 50 Free Amines (as Methyl Amine) Max. 0.01 % Water Max. 0.05 %
packaging product number Unit size case size MR1282-065 1L 1L Amber Glass MR1282-002 1L 6x1L Amber Glass MR1282-007 20L 20L Metal Pail MR1282-048 4L 4L Amber Glass MR1282-001 4L 4x4L Amber Glass
Met-
1341-METHYl-2-PYRROlIDINONE(CONTINUED)
anhydrosolv Mh3903
Packaged under Nitrogen in Septum Sealed Bottle
specifications Appearance (clear, colorless liquid) Passes Test Assay Min. 99.5 % Water Max. 50 ppm
packaging product number Unit size case size MH3903-174 100ml 100ml Amber Glass with Septum Seal MH3903-100 100ml 6x100ml Amber Glass with Septum Seal MH3903-150 1L 6x1L Amber Glass with Septum Seal MH3903-041 1L 1L Amber Glass with Septum Seal
bio Mb1283
For Biotech Application Packaged under Nitrogen. Submicron filtered.
specifications Amines (as Dimethylamine) Max. 5 ppm Assay Min. 99.5 % Color (APHA) Max. 20 Residue after Ignition Max. 10 ppm Water Max. 0.02 % Optical Absorbance at 285 nm Max. 1.00 300 nm Max. 0.50 325 nm Max. 0.10 350 nm Max. 0.03 400 nm Max. 0.01
packaging product number Unit size case size MB1283-136 4L 4x4L Amber Glass with Molecular Sieve MB1283-134 4L 4L Amber Glass with Molecular Sieve MB1283-048 4L 4L Amber Glass MB1283-001 4L 4x4L Amber Glass
hplc/spectro Ms1961
For Use in Liquid Chromatography and Spectrophotometry Packaged under Nitrogen. Submicron filtered.
specifications Assay Min. 99.5 % Color Max. 20 Residue after Ignition Max. 5 ppm Water Max. 0.05 % Titrable Base Max. 0.001 meq/g
Optical Absorbance at 265 nm Max. 1.00 275 nm Max. 0.70 300 nm Max. 0.30 325 nm Max. 0.10 350 nm Max. 0.03 400 nm Max. 0.01
packaging product number Unit size case size MS1961-065 1L 1L Amber Glass MS1961-002 1L 6x1L Amber Glass MS1961-048 4L 4L Amber Glass MS1961-001 4L 4x4L Amber Glass
METHYl SUlFOxIDESee Dimethyl Sulfoxide
2-METHYlbUTANE(ISOPENTANE)
C2H
5CH(CH
3)
2 FW 72.15 CAS 78-78-4
BP 30°C D 0.620 FP -56°C NFPA 1-4-0 Storage Code: RED IMO Pentanes, Liquid, 3, UN1265, PG I
certified Mr4107
specifications Assay Min. 99.0 % Color (APHA) Max. 10
packaging product number Unit size case size MR4107-065 1L 1L Amber Glass MR4107-002 1L 6x1L Amber Glass MR4107-048 4L 4L Amber Glass MR4107-001 4L 4x4L Amber Glass
METHYlCYClOHExANE C
6H
11CH
3 FW 98.19 CAS 108-87-2
MP -126°C BP 101°C D 0.770 Merck Index 13,6074 FP -3°C NFPA 1-3-0 Storage Code: RED IMO Methylcyclohexane, 3, UN2296, PG II
physical properties Boiling Point (760mm) 101°C Density (g/ml) at 25°C 0.77 Refractive Index (n20°/D) 1.422
certified Mr4111
specifications Assay Min. 99.9 % Residue after Evaporation Max. 0.005 % Water Max. 0.05 %
135 packaging product number Unit size case size MR4111-065 1L 1L Amber Glass MR4111-002 1L 6x1L Amber Glass MR4111-048 4L 4L Amber Glass MR4111-001 4L 4x4L Amber Glass
hplc/spectro Ms4110
For Use in Liquid Chromatography and Spectrophotometry Packaged under Nitrogen. Submicron filtered.
specifications Assay Min. 99.0 % Color (APHA) Max. 10 Residue after Evaporation Max. 5 ppm Water Max. 0.01 % Optical Absorbance at 207 nm Max. 1.00 221 nm Max. 0.40 232 nm Max. 0.15 260 nm Max. 0.05 300 nm Max. 0.01 400 nm Max. 0.01
packaging product number Unit size case size MS4110-065 1L 1L Amber Glass MS4110-002 1L 6x1L Amber Glass
METHYlENE CHlORIDESee Dichloromethane
1-METHYlIMIDAzOlE C
4H
6N
2 FW 82.10 CAS 616-47-7
MP -60°C BP 198°C D 1.030 FP 92°C NFPA 3-2-1 Storage Code: WHITE IMO Corrosive Liquid, Basic, Organic, N.O.S. (1-Methylimidazole), UN3267, PG II
bio Mb1288
specifications Assay Min. 99.0 % Water Max. 150 ppm
packaging product number Unit size case size MB1288-065 1L 1L Amber Glass MB1288-002 1L 6x1L Amber Glass MB1288-053 500ml 500ml Amber Glass MB1288-013 500ml 6x500ml Amber Glass
MIbKSee Methyl Isobutyl Ketone
MINERAl OIl, HEAvY(PARAFFIN OIL, HEAVY; LIQUID PETROLATUM)
CAS 8042-42-7 NFPA 0-1-0 Storage Code: GREEN
certified Mr1285
specifications Neutrality Passes Test Polynuclear Compounds (UV Absorbance) Passes Test Readily Carbonizable Substances Passes Test Solid Paraffin Passes Test Specific Gravity at 25ºC/25ºC 0.845 - 0.905 Viscosity at 40ºC in centistokes Min. 34.5
packaging product number Unit size case size MR1285-065 1L 1L Amber Glass MR1285-002 1L 6x1L Amber Glass MR1285-048 4L 4L Amber Glass MR1285-001 4L 4x4L Amber Glass
MINERAl OIl, lIGHT (PARAFFIN OIL, LIGHT; LIQUID PETROLATUM)
CAS 8042-42-7 NFPA 0-1-0 Storage Code:GREEN
certified Mr1284
specifications Neutrality Passes Test Polynuclear Compounds (UV Absorbance) Passes Test Readily Carbonizable Substances Passes Test Solid Paraffin Passes Test Specific Gravity at 25ºC/25ºC 0.818 - 0.880 Viscosity at 40ºC in centistokes Max. 33.5
packaging product number Unit size case size MR1284-065 1L 1L Amber Glass MR1284-002 1L 6x1L Amber Glass MR1284-048 4L 4L Amber Glass MR1284-001 4L 4x4L Amber Glass
MONObASIC POTASSIUM PHOSPHATESee Potassium Phosphate Monobasic
MONOCHlORObENzENESee Chlorobenzene
Met-Mon
136MONOETHANOlAMINESee Ethanolamine
MONOGlYMESee Ethylene Glycol Dimethyl Ether
MORPHOlINE NH(CH
2)
2OCH
2CH
2 FW 87.12 CAS 110-91-8
MP -7 to -5°C BP 129°C D 0.999 Merck Index 13,6303 FP 35°C NFPA 3-3-0 Storage Code: RED IMO Morpholine, 8, UN2054, PG I
acs Mr1305
specifications Assay Min. 99.0 % Color (APHA) Max. 15 Boiling Range Passes Test
packaging product number Unit size case size MR1305-065 1L 1L Amber Glass MR1305-002 1L 6x1L Amber Glass MR1305-048 4L 4L Amber Glass MR1305-001 4L 4x4L Amber Glass
NITRIC ACID HNO
3 FW 63.01 CAS 7697-37-2
Merck Index 13,6608 NFPA 3-0-0 Storage Code: WHITE IMO Nitric Acid, 8, UN2031, PG II
acs nr1320
Meets reagent specifications for testing USP/NF monographs.
specifications Appearance Passes Test Arsenic (As) Max. 0.01 ppm Assay 68.0 - 70.0 % Chloride (Cl) Max. 0.5 ppm Color (APHA) Max. 10 Heavy Metals (as Pb) Max. 0.2 ppm Iron (Fe) Max. 0.2 ppm Residue after Ignition Max. 0.0005 % Sulfate Max. 1 ppm
packaging product number Unit size case size NR1320-058 2.5L 2.5L Flint Glass NR1320-011 2.5L 4x2.5L Flint Glass NR1320-071 500ml 500ml Flint Glass NR1320-068 500ml 6x500ml Flint Glass
traceMetal ne4123
Concentration of some elements may change over time due to storage in glass container.
specifications Assay (Nitric Acid) 67 - 70 % Color (APHA) Max. 10 Chloride (Cl) Max. 0.2 ppm Total Phosphorus (P) Max. 0.01 ppm Total Sulfur (S) Max. 0.3 ppm Aluminum (Al) Max. 1 ppb Antimony (Sb) Max. 1 ppb Arsenic (As) Max. 1 ppb Barium (Ba) Max. 1 ppb Beryllium (Be) Max. 1 ppb Bismuth (Bi) Max. 1 ppb Boron (B) Max. 1 ppb Cadmium (Cd) Max. 1 ppb Calcium (Ca) Max. 1 ppb Cerium (Ce) Max. 0.5 ppb Cesium (Cs) Max. 0.5 ppb Chromium (Cr) Max. 1 ppb Cobalt (Co) Max. 1 ppb Copper (Cu) Max. 1 ppb Dysprosium (Dy) Max. 0.5 ppb Erbium (Er) Max. 0.5 ppb Europium (Eu) Max. 0.5 ppb Gadolinium (Gd) Max. 0.5 ppb Gallium (Ga) Max. 0.5 ppb Germanium (Ge) Max. 0.5 ppb Gold (Au) Max. 0.5 ppb Hafnium (Hf ) Max. 0.5 ppb Holmium (Ho) Max. 0.5 ppb Indium (In) Max. 0.5 ppb Iron (Fe) Max. 1 ppb Lanthanum (La) Max. 0.5 ppb Lead (Pb) Max. 1 ppb Lithium (Li) Max. 1 ppb Lutetium (Lu) Max. 0.5 ppb Magnesium (Mg) Max. 1 ppb Manganese (Mn) Max. 1 ppb Mercury (Hg) Max. 1 ppb Molybdenum (Mo) Max. 1 ppb Neodymium (Nd) Max. 0.5 ppb Nickel (Ni) Max. 1 ppb Niobium (Nb) Max. 0.5 ppb Palladium (Pd) Max. 0.5 ppb Platinum (Pt) Max. 0.5 ppb Potassium (K) Max. 1 ppb Praseodymium (Pr) Max. 0.5 ppb Rhenium (Re) Max. 0.5 ppb Rhodium (Rh) Max. 0.5 ppb Rubidium (Rb) Max. 0.5 ppb Ruthenium (Ru) Max. 0.5 ppb Samarium (Sm) Max. 0.5 ppb Scandium (Sc) Max. 0.5 ppb Selenium (Se) Max. 1 ppb Silver (Ag) Max. 1 ppb Sodium (Na) Max. 1 ppb
137 Strontium (Sr) Max. 1 ppb Tantalum (Ta) Report Only Tellurium (Te) Max. 0.5 ppb Terbium (Tb) Max. 0.5 ppb Thallium (Tl) Max. 0.5 ppb Thorium (Th) Max. 1 ppb Thulium (Tm) Max. 0.5 ppb Tin (Sn) Max. 1 ppb Titanium (Ti) Max. 1 ppb Tungsten (W) Max. 0.5 ppb Uranium (U) Max. 1 ppb Vanadium (V) Max. 1 ppb Ytterbium (Yb) Max. 0.5 ppb Yttrium (Y) Max. 0.5 ppb Zinc (Zn) Max. 1 ppb Zirconium (Zr) Max. 1 ppb
packaging product number Unit size case size NE4123-058 2.5L 2.5L Flint Glass NE4123-011 2.5L 4x2.5L Flint Glass NE4123-071 500ml 500ml Flint Glass NE4123-068 500ml 6x500ml Flint Glass
traceMetal plUs ne4122
Packaged in specially manufactured, precleaned Teflon® FEP bottles to protect product integrity.
specifications Assay (Nitric Acid) 67 - 70 % Aluminum (Al) Max. 20 ppt Antimony (Sb) Max. 10 ppt Arsenic (As) Max. 20 ppt Barium (Ba) Max. 10 ppt Beryllium (Be) Max. 10 ppt Bismuth (Bi) Max. 10 ppt Boron (B) Max. 20 ppt Cadmium (Cd) Max. 10 ppt Calcium (Ca) Max. 20 ppt Cerium (Ce) Max. 10 ppt Cesium (Cs) Max. 10 ppt Chromium (Cr) Max. 20 ppt Cobalt (Co) Max. 10 ppt Copper (Cu) Max. 20 ppt Dysprosium (Dy) Max. 1 ppt Erbium (Er) Max. 1 ppt Europium (Eu) Max. 1 ppt Gadolinium (Gd) Max. 1 ppt Gallium (Ga) Max. 10 ppt Germanium (Ge) Max. 10 ppt Gold (Au) Max. 20 ppt Hafnium (Hf ) Max. 10 ppt Holmium (Ho) Max. 1 ppt Indium (In) Max. 1 ppt Iron (Fe) Max. 20 ppt Lanthanum (La) Max. 1 ppt Lead (Pb) Max. 10 ppt Lithium (Li) Max. 10 ppt Lutetium (Lu) Max. 1 ppt Magnesium (Mg) Max. 10 ppt
Manganese (Mn) Max. 10 ppt Mercury (Hg) Max. 100 ppt Molybdenum (Mo) Max. 10 ppt Neodymium (Nd) Max. 1 ppt Nickel (Ni) Max. 50 ppt Niobium (Nb) Max. 1 ppt Palladium (Pd) Max. 20 ppt Platinum (Pt) Max. 20 ppt Potassium (K) Max. 10 ppt Praseodymium (Pr) Max. 1 ppt Rhenium (Re) Max. 10 ppt Rhodium (Rh) Max. 10 ppt Rubidium (Rb) Max. 10 ppt Ruthenium (Ru) Max. 20 ppt Samarium (Sm) Max. 1 ppt Scandium (Sc) Max. 10 ppt Selenium (Se) Report Only Silver (Ag) Max. 10 ppt Sodium (Na) Max. 10 ppt Strontium (Sr) Max. 10 ppt Tantalum (Ta) Report Only Tellurium (Te) Max. 1 ppt Terbium (Tb) Max. 1 ppt Thallium (Tl) Max. 10 ppt Thorium (Th) Max. 1 ppt Thulium (Tm) Max. 1 ppt Tin (Sn) Max. 20 ppt Titanium (Ti) Max. 10 ppt Tungsten (W) Max. 10 ppt Uranium (U) Max. 1 ppt Vanadium (V) Max. 10 ppt Ytterbium (Yb) Max. 1 ppt Yttrium (Y) Max. 1 ppt Zinc (Zn) Max. 20 ppt Zirconium (Zr) Max. 10 ppt
packaging product number Unit size case size NE4122-030 1L 1L Teflon Bottle NE4122-042 250ml 250ml Teflon Bottle NE4122-063 2L 2L Teflon Bottle NE4122-029 500ml 500ml Teflon Bottle
Mon-Nit
138NITRObENzENE C
6H
5NO
2 FW 123.11 CAS 98-95-3
MP 5-6°C BP 210-211°C D 1.196 Merck Index 13,6621 FP 87°C NFPA 3-2-1 Storage Code: BLUE Marine Pollutant IMO Nitrobenzene, 6.1, UN1662, PG II
acs nr4125
specifications Assay Min. 99.0 % Chloride (Cl) Max. 5 ppm Residue after Evaporation Max. 0.005 % Water-soluble Titrable Acid Max. 0.0005 meq/g
packaging product number Unit size case size NR4125-065 1L 1L Amber Glass NR4125-002 1L 6x1L Amber Glass NR4125-048 4L 4L Amber Glass NR4125-001 4L 4x4L Amber Glass
NITROMETHANE CH
3NO
2 FW 61.04 CAS 75-52-5
MP -29°C BP 101.2°C D 1.127 Merck Index 13,6644 FP 35°C NFPA 1-3-3 Storage Code: RED IMO Nitromethane, 3, UN1261, PG II
acs nr4126
specifications Appearance Passes Test Assay Min. 95.0 % Color (APHA) Max. 10 Water Max. 0.05 %
packaging product number Unit size case size NR4126-065 1L 1L Amber Glass NR4126-002 1L 6x1L Amber Glass NR4126-048 4L 4L Amber Glass NR4126-001 4L 4x4L Amber Glass
OCTANE CH
3(CH
2)
6CH
3 FW 114.23 CAS 111-65-9
MP -57°C BP 125-127°C D 0.703 Merck Index 13,6782 FP 15°C NFPA 0-3-0 Storage Code: RED IMO Octanes, 3, UN1262, PG II
certified or1425
specifications Assay Min. 98.0 % Color (APHA) Max. 10 Water Max. 0.02 %
packaging product number Unit size case size OR1425-065 1L 1L Amber Glass OR1425-002 1L 6x1L Amber Glass OR1425-048 4L 4L Amber Glass OR1425-001 4L 4x4L Amber Glass
iso-OCTANESee 2,2,4-Trimethylpentane
OCTANESSee 2,2,4-Trimethylpentane
1-OCTANESUlFONIC ACID, SODIUM SAlT(SODIUM 1-OCTANESULFONATE)
CH3(CH
2)
7SO
3Na FW 216.27 CAS 5324-84-5
NFPA 1-1-0 Storage Code: GREEN
hplc os3415
For Ion-Pair Chromatography of Basic Compounds
specifications Assay Min. 98.0 %Optical Absorbance of 0.25M Solution at 200 nm Max. 0.20 210 nm Max. 0.08 220 nm Max. 0.06 230 nm Max. 0.05 240 nm Max. 0.05 250 nm Max. 0.05
packaging product number Unit size case size OS3415-019 100g 100g Amber Glass OS3415-009 25g 25g Amber Glass
1-OCTANOl(n-CAPRYLIC ALCOHOL, OCTYL ALCOHOL)
CH3(CH
2)
7OH FW 130.23 CAS 111-87-5
MP -15°C BP 196°C D 0.827 Merck Index 13,6784 FP 81°C NFPA 1-2-0 Storage Code: RED
physical properties Boiling Point (760mm) 196°C Density (g/ml) at 25°C 0.827 Refractive Index (n20°/D) 1.429
acs or1374
specifications Appearance (clear liquid) Passes Test Assay Min. 99 %
139 Color (APHA) Max. 10 Residue after Evaporation Max. 0.004 % Titrable Acid Max. 0.0002 meq/g
packaging product number Unit size case size OR1374-065 1L 1L Amber Glass OR1374-002 1L 6x1L Amber Glass OR1374-048 4L 4L Amber Glass OR1374-001 4L 4x4L Amber Glass
hplc/spectro os1373
For Use in Liquid Chromatography and Spectrophotometry Packaged under Nitrogen. Submicron filtered.
specifications Assay Min. 99.0 % Residue after Evaporation Max. 40 ppm Water Max. 0.02 % Optical Absorbance at 215 nm Max. 1.00 225 nm Max. 0.50 235 nm Max. 0.20 250 nm Max. 0.05 300 nm Max. 0.01 400 nm Max. 0.01
packaging product number Unit size case size OS1373-065 1L 1L Amber Glass OS1373-002 1L 6x1L Amber Glass
2-OCTANOl(CAPRYL ALCOHOL)
CH3(CH
2)
5CH(OH)CH
3 FW 130.23 CAS 123-96-6
BP 174-181°C D 0.819 Merck Index 13,6785 FP 71°C NFPA 1-2-0 Storage Code: RED
certified or1375
specifications Assay Min. 97.0 %
packaging product number Unit size case size OR1375-065 1L 1L Amber Glass OR1375-002 1L 6x1L Amber Glass OR1375-048 4L 4L Amber Glass OR1375-001 4L 4x4L Amber Glass
OIl OF vITRIOlSee Sulfuric Acid
ORTHOPHOSPHORIC ACIDSee Phosphoric Acid
OxIDATION SOlUTION (0.02M IODINE IN THF/PYRIDINE/WATER, 70:20:10) NFPA 2-3-1 Storage Code: RED IMO Flammable Liquid N.O.S. (Tetrahydrofuran, Pyridine, Iodine), 3, UN1993, PG II
bio ob9911
For Oligonucleotide Synthesis (ABI formulation)
specifications Appearance (Dark-Iodine Color Solution) Passes Test Iodine 0.019 - 0.021 M Pyridine (by Volume) 19 - 21 % Tetrahydrofuran (by Volume) 69 - 71 % Water (by Volume) 9 - 11 % Iodine Component Purity Min. 99.8 % Pyridine Component Purity Min. 99.8 % Tetrahydrofuran Component Purity Min. 99.9 %
packaging product number Unit size case size OB9911-059 2.5L 2.5L Amber Glass OB9911-014 2.5L 4x2.5L Amber Glass OB9911-056 200ml 200ml Amber Glass OB9911-027 200ml 6x200ml Amber Glass OB9911-054 450ml 450ml Amber Glass OB9911-032 450ml 6x450ml Amber Glass OB9911-048 4L 4L Amber Glass OB9911-001 4L 4x4L Amber Glass
Nit-Oxi
140OxIDATION SOlUTION (0.02M IODINE IN THF/PYRIDINE/WATER, 89.6/0.4/10) NFPA 2-3-1 Storage Code: RED IMO Flammable Liquid N.O.S. (Tetrahydrofuran, Pyridine, Iodine), 3, UN1993, PG II
bio ob9910
For Oligonucleotide Synthesis (Expedite formulation)
specifications Appearance (Dark-Iodine Color Solution) Passes Test Iodine 0.018 - 0.022 M Pyridine (by Volume) 0.36 - 0.44 % Tetrahydrofuran (by Volume) 89.56 - 89.64 % Water (by Volume) 9.0 - 11.0 % Iodine Component Purity Min. 99.8 % Pyridine Component Purity Min. 99.8 % Tetrahydrofuran Component Purity Min. 99.9 %
packaging product number Unit size case size OB9910-059 2.5L 2.5L Amber Glass OB9910-014 2.5L 4x2.5L Amber Glass OB9910-056 200ml 200ml Amber Glass OB9910-027 200ml 6x200ml Amber Glass OB9910-054 450ml 450ml Amber Glass OB9910-032 450ml 6x450ml Amber Glass OB9910-048 4L 4L Amber Glass OB9910-001 4L 4x4L Amber Glass
OxIDATION SOlUTION (0.05M IODINE IN PYRIDINE/WATER, 90:10) NFPA 3-3-0 Storage Code: RED IMO Flammable Liquid N.O.S. (Pyridine, Iodine), 3, UN1993, PG II
bio ob3994
For Oligonucleotide Synthesis (Amersham formulation)
specifications Appearance (Dark-Iodine Color Solution) Passes Test Iodine 0.049 - 0.051 M Pyridine (by Volume) 89.0 - 91.0 % Water (by Volume) 9.0 - 11.0 % Iodine Component Purity Min. 99.8 % Pyridine Component Purity Min. 99.8 %
packaging product number Unit size case size OB3994-057 2.5L 2.5L GL-45 Amber Glass
OB3994-055 2.5L 4x2.5L GL-45 Amber Glass
OxIDATION SOlUTION (0.1M IODINE IN THF/PYRIDINE/WATER, 78:20:2) NFPA 2-3-1 Storage Code: RED IMO Flammable Liquid N.O.S. (Tetrahydrofuran, Pyridine), 3, UN1993, PG II
bio ob9914
For Oligonucleotide Synthesis (ABI formulation)
specifications Appearance (Dark-Iodine Color Solution) Passes Test Iodine 0.09 - 0.11 M Pyridine (by Volume) 19.5 - 20.5 % Tetrahydrofuran (by Volume) 77 - 79 % Water (by Volume) 1.8 - 2.2 % Iodine Component Purity Min. 99.8 % Pyridine Component Purity Min. 99.8 % Tetrahydrofuran Component Purity Min. 99.9 %
packaging product number Unit size case size OB9914-059 2.5L 2.5L Amber Glass OB9914-014 2.5L 4x2.5L Amber Glass OB9914-056 200ml 200ml Amber Glass OB9914-027 200ml 6x200ml Amber Glass OB9914-054 450ml 450ml Amber Glass OB9914-032 450ml 6x450ml Amber Glass OB9914-048 4L 4L Amber Glass OB9914-001 4L 4x4L Amber Glass
PARAFFIN OIlSee Mineral Oil
PENTAMETHYlENE GlYCOlSee 1,5-Pentanediol
PENTANE CH
3(CH
2)
3CH
3 FW 72.15 CAS 109-66-0
MP -130°C BP 35-36°C D 0.626 Merck Index 13,7193 FP -49°C NFPA 1-4-0 Storage Code: RED IMO Pentanes, Liquid, 3, UN1265, PG II
physical properties Boiling Range 35-36°C Density (g/ml) at 25°C 0.626 Dielectric Constant at 20°C 1.84 Elutropic Value (Silica) 0 Refractive Index (n20°/D) 1.358 Viscosity (cps) at 20°C 0.23
141absolv pa2013
For Use in Liquid Chromatography, Spectrophotometry, and for Organic Residue Analysis Packaged under Nitrogen.
specifications Assay (as n-Pentane) Min. 98.0 % Assay (as C5 Hydrocarbons) Min. 99.9 % Color (APHA) Max. 10 GC-ECD Responsive Residue (as Heptachlor Epoxide) Max. 10 ppt GC-FID Responsive Residue (as 2-Octanol) Max. 5 ppb Fluorescence Background (as Quinine Sulfate) Max. 1 ppb Residue after Evaporation Max. 1 ppm Water Max. 0.02 % Optical Absorbance at 192 nm Max. 1.00 200 nm Max. 0.40 210 nm Max. 0.15 220 nm Max. 0.05 254 nm Max. 0.01
packaging product number Unit size case size PA2013-065 1L 1L Amber Glass PA2013-002 1L 6x1L Amber Glass PA2013-048 4L 4L Amber Glass PA2013-001 4L 4x4L Amber Glass
anhydrosolv ph3906
Packaged under Nitrogen in Septum Sealed Bottle
specifications Assay Min. 99.0 %
Residue after Evaporation Max. 3 ppm Water Max. 10 ppm
packaging product number Unit size case size PH3906-174 100ml 100ml Amber Glass with Septum Seal PH3906-100 100ml 6x100ml Amber Glass with Septum Seal PH3906-150 1L 6x1L Amber Glass with Septum Seal PH3906-041 1L 1L Amber Glass with Septum Seal
certified pr1412
specifications Assay (as n-Pentane) Min. 98.0 % Assay (as C5 Hydrocarbons) Min. 99.0 % Color (APHA) Max. 10 Residue after Evaporation Max. 0.002 % Sulfur Compounds (as S) Max. 0.005 % Water Max. 0.02 %
packaging product number Unit size case size PR1412-065 1L 1L Amber Glass PR1412-002 1L 6x1L Amber Glass PR1412-008 204L 204L Metal Drum PR1412-007 20L 20L Metal Pail PR1412-073 4L 4L PVC Coated Amber Glass PR1412-048 4L 4L Amber Glass PR1412-006 4L 4x4L PVC Coated Amber Glass PR1412-001 4L 4x4L Amber Glass
Oxi-Pen
142PENTANE (CONTINUED)
certified plUs pr2580
specifications Assay (as n-Pentane) Min. 98.0 % Assay (as C5 Hydrocarbons) Min. 99.0 % Color (APHA) Max. 10 Residue after Evaporation Max. 0.002 % Sulfur Compounds (as S) Max. 0.005 % Water Max. 0.02 %
packaging product number Unit size case size PR2580-065 1L 1L Amber Glass PR2580-002 1L 6x1L Amber Glass PR2580-048 4L 4L Amber Glass PR2580-001 4L 4x4L Amber Glass
gc pg2835
For Organic Residue Analysis Packaged under Nitrogen.
specifications Assay (as n-Pentane) Min. 98.0 % Assay (as C5 Hydrocarbons) Min. 99.8 % Color (APHA) Max. 10 GC-ECD Responsive Residue (as Heptachlor Epoxide) Max. 10 ppt GC-FID Responsive Residue (as 2-Octanol) Max. 5 ppb Residue after Evaporation Max. 5 ppm Water Max. 0.02 %
packaging product number Unit size case size PG2835-065 1L 1L Amber Glass PG2835-002 1L 6x1L Amber Glass PG2835-048 4L 4L Amber Glass PG2835-001 4L 4x4L Amber Glass
hplc/spectro ps2011
For Use in Liquid Chromatography and Spectrophotometry Packaged under Nitrogen. Submicron filtered.
specifications Assay (as n-Pentane) Min. 98.0 % Assay (as C5 Hydrocarbons) Min. 99.9 % Color (APHA) Max. 10 Residue after Evaporation Max. 5 ppm Water Max. 0.02 % Optical Absorbance at 192 nm Max. 1.00 200 nm Max. 0.40 210 nm Max. 0.15 220 nm Max. 0.05 254 nm Max. 0.01
packaging product number Unit size case size PS2011-065 1L 1L Amber Glass PS2011-002 1L 6x1L Amber Glass PS2011-073 4L 4L PVC Coated Amber Glass PS2011-048 4L 4L Amber Glass PS2011-006 4L 4x4L PVC Coated Amber Glass PS2011-001 4L 4x4L Amber Glass
1,5-PENTANEDIOl(PENTAMETHYLENE GLYCOL)
HO(CH2)
5OH FW 104.15 CAS 111-29-5
BP 242°C D 0.994 Merck Index 13,7194 FP 129°C NFPA 1-1-0 Storage Code: GREEN
certified pr1413
specifications Assay Min. 97.0 %
packaging product number Unit size case size PR1413-065 1L 1L Amber Glass PR1413-002 1L 6x1L Amber Glass PR1413-048 4L 4L Amber Glass PR1413-001 4L 4x4L Amber Glass
1-PENTANESUlFONIC ACID, SODIUM SAlT(SODIUM 1-PENTANESULFONATE)
CH3(CH
2)
4SO
3Na FW 174.2 CAS 22767-49-3
NFPA 1-1-0 Storage Code: GREEN
hplc ps3422
For Ion-Pair Chromatography of Basic Compounds
specifications Assay Min. 98.0 % Optical Absorbance of 0.25M Solution at 200 nm Max. 0.20 210 nm Max. 0.08 220 nm Max. 0.06 230 nm Max. 0.05 240 nm Max. 0.05 250 nm Max. 0.05 260 nm Max. 0.04
packaging product number Unit size case size PS3422-019 100g 100g Amber Glass PS3422-009 25g 25g Amber Glass
1432,4-PENTANEDIONESee Acetylacetone
1-PENTANOlSee n-Amyl Alcohol
2-PENTANONESee Methyl Propyl Ketone
iso-PENTYl ACETATESee Isoamyl Acetate
PENTYl AlCOHOlSee n-Amyl Alcohol
iso-PENTYl AlCOHOlSee Isoamyl Alcohol
tert-PENTYl AlCOHOlSee tert-Amyl Alcohol
PERCHlOROETHYlENESee Tetrachloroethylene
PERCHlORIC ACID HClO
4 FW 100.46 CAS 7601-90-3
D 1.664 Merck Index 13,7232 NFPA 3-0-3 Oxy Storage Code: YELLOW IMO Perchloric Acid, 5.1, UN1873, PG II
traceMetal pe4128
Concentration of some elements may change over time due to storage in glass container.
specifications Assay 67 - 71 % Color (APHA) Max. 10 Aluminum (Al) Max. 1 ppb Antimony (Sb) Max. 1 ppb Arsenic (As) Max. 0.5 ppb Barium (Ba) Max. 1 ppb Beryllium (Be) Max. 1 ppb Bismuth (Bi) Max. 1 ppb Cadmium (Cd) Max. 1 ppb Calcium (Ca) Max. 1 ppb Cerium (Ce) Max. 0.5 ppb Cesium (Cs) Max. 0.5 ppb Cobalt (Co) Max. 1 ppb Copper (Cu) Max. 1 ppb Dysprosium (Dy) Max. 0.5 ppb Erbium (Er) Max. 0.5 ppb
Europium (Eu) Max. 0.5 ppb Gadolinium (Gd) Max. 0.5 ppb Gallium (Ga) Max. 0.5 ppb Hafnium (Hf ) Report Only Holmium (Ho) Max. 0.5 ppb Indium (In) Max. 0.5 ppb Iron (Fe) Max. 1 ppb Lanthanum (La) Max. 0.5 ppb Lead (Pb) Max. 1 ppb Lithium (Li) Max. 1 ppb Lutetium (Lu) Max. 0.5 ppb Magnesium (Mg) Max. 1 ppb Manganese (Mn) Max. 1 ppb Molybdenum (Mo) Max. 1 ppb Neodymium (Nd) Max. 0.5 ppb Nickel (Ni) Max. 1 ppb Niobium (Nb) Report Only Palladium (Pd) Max. 0.5 ppb Platinum (Pt) Max. 0.5 ppb Potassium (K) Max. 1 ppb Praseodymium (Pr) Max. 0.5 ppb Rhodium (Rh) Max. 0.5 ppb Rubidium (Rb) Max. 0.5 ppb Samarium (Sm) Max. 0.5 ppb Scandium (Sc) Max. 0.5 ppb Silver (Ag) Max. 1 ppb Sodium (Na) Max. 1 ppb Strontium (Sr) Max. 1 ppb Tantalum (Ta) Report Only Tellurium (Te) Max. 0.5 ppb Terbium (Tb) Max. 0.5 ppb Thallium (Tl) Max. 0.5 ppb Thorium (Th) Max. 1 ppb Thulium (Tm) Max. 0.5 ppb Tin (Sn) Max. 1 ppb Titanium (Ti) Max. 1 ppb Tungsten (W) Max. 0.5 ppb Uranium (U) Max. 1 ppb Vanadium (V) Max. 1 ppb Ytterbium (Yb) Max. 0.5 ppb Yttrium (Y) Max. 0.5 ppb Zinc (Zn) Max. 1 ppb Zirconium (Zr) Max. 1 ppb
packaging product number Unit size case size PE4128-058 2.5L 2.5L Flint Glass PE4128-011 2.5L 4x2.5L Flint Glass PE4128-071 500ml 500ml Flint Glass PE4128-068 500ml 6x500ml Flint Glass
Pen-Per
144PERCHlORIC ACID (CONTINUED)
traceMetal plUs pe4127
Packaged in specially manufactured, precleaned Teflon® FEP bottles to protect product integrity.
specifications Assay 65 - 71 % Aluminum (Al) Max. 100 ppt Antimony (Sb) Max. 100 ppt Arsenic (As) Max. 100 ppt Barium (Ba) Max. 100 ppt Beryllium (Be) Max. 100 ppt Bismuth (Bi) Max. 10 ppt Cadmium (Cd) Max. 10 ppt Calcium (Ca) Max. 100 ppt Cerium (Ce) Max. 10 ppt Cesium (Cs) Max. 10 ppt Cobalt (Co) Max. 100 ppt Copper (Cu) Max. 100 ppt Dysprosium (Dy) Max. 10 ppt Erbium (Er) Max. 10 ppt Europium (Eu) Max. 10 ppt Gadolinium (Gd) Max. 10 ppt Gallium (Ga) Max. 10 ppt Hafnium (Hf ) Report Only Holmium (Ho) Max. 10 ppt Indium (In) Max. 10 ppt Iron (Fe) Max. 100 ppt Lanthanum (La) Max. 10 ppt Lead (Pb) Max. 10 ppt Lithium (Li) Max. 100 ppt Lutetium (Lu) Max. 10 ppt Magnesium (Mg) Max. 100 ppt Manganese (Mn) Max. 100 ppt Molybdenum (Mo) Max. 100 ppt Neodymium (Nd) Max. 10 ppt Nickel (Ni) Max. 100 ppt Niobium (Nb) Report Only Palladium (Pd) Max. 10 ppt Platinum (Pt) Max. 100 ppt Potassium (K) Max. 100 ppt Praseodymium (Pr) Max. 10 ppt Rhodium (Rh) Max. 10 ppt Rubidium (Rb) Max. 10 ppt Samarium (Sm) Max. 10 ppt Scandium (Sc) Max. 100 ppt Silver (Ag) Max. 100 ppt Sodium (Na) Max. 100 ppt Strontium (Sr) Max. 100 ppt Tantalum (Ta) Report Only Tellurium (Te) Max. 10 ppt Terbium (Tb) Max. 10 ppt Thallium (Tl) Max. 100 ppt Thorium (Th) Max. 10 ppt Thulium (Tm) Max. 10 ppt Tin (Sn) Max. 100 ppt Titanium (Ti) Max. 100 ppt Tungsten (W) Report Only
Uranium (U) Max. 10 ppt Vanadium (V) Max. 100 ppt Ytterbium (Yb) Max. 10 ppt Yttrium (Y) Max. 10 ppt Zinc (Zn) Max. 100 ppt Zirconium (Zr) Max. 100 ppt
packaging product number Unit size case size PE4127-030 1L 1L Teflon Bottle PE4127-042 250ml 250ml Teflon Bottle PE4127-029 500ml 500ml Teflon Bottle
acs (60-62%) pr1422
specifications Assay (by Titration) 60.0 - 62.0 % Chloride (Cl) Max. 0.001 % Color (APHA) Max. 10 Heavy Metals (as Pb) Max. 1 ppm Iron (Fe) Max. 1 ppm Nitrogen Compounds (as N) Max. 0.001 % Residue after Evaporation Max. 0.003 % Silicate and Phosphate (as SiO2) Max. 5 ppm Sulfate Max. 0.001 %
packaging product number Unit size case size PR1422-058 2.5L 2.5L Flint Glass PR1422-011 2.5L 4x2.5L Flint Glass PR1422-071 500ml 500ml Flint Glass PR1422-068 500ml 6x500ml Flint Glass
acs (69-72%) pr1423
Meets reagent specifications for testing USP/NF monographs.
specifications Assay 69.0 - 72.0 % Chloride (Cl) Max. 0.001 % Color (APHA) Max. 10 Heavy Metals (as Pb) Max. 1 ppm Iron (Fe) Max. 1 ppm Nitrogen Compounds (as N) Max. 0.001 % Residue after Ignition Max. 0.003 % Silicate and Phosphate (as SiO2) Max. 5 ppm Sulfate Max. 0.001 %
packaging product number Unit size case size PR1423-058 2.5L 2.5L Flint Glass PR1423-011 2.5L 4x2.5L Flint Glass PR1423-071 500ml 500ml Flint Glass PR1423-068 500ml 6x500ml Flint Glass
PETROlEUM ETHER 35-60°C CAS 8032-32-4 BP 35-60°C D 0.640 Merck Index 13,5513 FP -49°C NFPA 1-4-0 Storage Code: RED
145 IMO Petroleum Distillates N.O.S (Petroleum Ether), 3, UN1268, PG I
physical properties Boiling Range 35-60°C Density (g/ml) at 25°C 0.64 Refractive Index (n20°/D) 1.363
absolv pa2019
For Organic Residue Analysis Packaged under Nitrogen. Submicron filtered.
specifications Boiling Range Passes Test Color (APHA) Max. 10 GC-ECD Responsive Residue (as Heptachlor Epoxide) Max. 10 ppt Residue after Evaporation Max. 1 ppm Water Max. 0.02 %
packaging product number Unit size case size PA2019-065 1L 1L Amber Glass PA2019-002 1L 6x1L Amber Glass PA2019-048 4L 4L Amber Glass PA2019-001 4L 4x4L Amber Glass
acs pr1428
specifications Acidity test Passes Test Boiling Range Passes Test Color (APHA) Max. 10 Residue after Evaporation Max. 0.001 %
packaging product number Unit size case size PR1428-065 1L 1L Amber Glass PR1428-002 1L 6x1L Amber Glass PR1428-008 204L 204L Metal Drum PR1428-007 20L 20L Metal Pail PR1428-073 4L 4L PVC Coated Amber Glass PR1428-048 4L 4L Amber Glass PR1428-006 4L 4x4L PVC Coated Amber Glass PR1428-001 4L 4x4L Amber Glass
acs plUs pr2584
specifications Acidity Passes Test Boiling Range 35-60°C Residue after Evaporation Max. 0.001 % Color (APHA) Max. 10 Tracemetals Aluminum (Al) Max. 0.5 ppm Barium (Ba) Max. 0.1 ppm Boron (B) Max. 0.02 ppm Cadmium (Cd) Max. 0.05 ppm Calcium (Ca) Max. 0.5 ppm
Chromium (Cr) Max. 0.02 ppm Cobalt (Co) Max. 0.02 ppm Copper (Cu) Max. 0.02 ppm Iron (Fe) Max. 0.1 ppm Lead (Pb) Max. 0.1 ppm Magnesium (Mg) Max. 0.1 ppm Manganese (Mn) Max. 0.02 ppm Nickel (Ni) Max. 0.02 ppm Tin (Sn) Max. 0.1 ppm Zinc (Zn) Max. 0.1 ppm
packaging product number Unit size case size PR2584-065 1L 1L Amber Glass PR2584-002 1L 6x1L Amber Glass PR2584-048 4L 4L Amber Glass PR2584-001 4L 4x4L Amber Glass
anhydrosolv ph3909
Packaged under Nitrogen in Septum Sealed Bottle
specifications Boiling Range Passes Test Residue after Evaporation Max. 5 ppm Water Max. 10 ppm
packaging product number Unit size case size PH3909-174 100ml 100ml Amber Glass with Septum Seal PH3909-100 100ml 6x100ml Amber Glass with Septum Seal PH3909-150 1L 6x1L Amber Glass with Septum Seal PH3909-041 1L 1L Amber Glass with Septum Seal
gc pg2840
For Organic Residue Analysis Packaged under Nitrogen. Submicron filtered.
specifications Boiling Range (Beginning Temperature) Min. 35°C Boiling Range (Completing Temperature) Max. 60°C Residue after Evaporation Max. 5 ppm Water Max. 0.02 % Color (APHA) Max. 10 GC-ECD Halogenated Residue (as Heptachlor Epoxide) Max. 10 ppt GC-FID Responsive Residue (as 2-Octanol) Max. 10 ppb
packaging product number Unit size case size PG2840-065 1L 1L Amber Glass PG2840-002 1L 6x1L Amber Glass PG2840-048 4L 4L Amber Glass PG2840-001 4L 4x4L Amber Glass
Per-Pet
146PETROlEUM ETHER 60-80°C CAS 110-54-3 n-HExANE, 25-50% CAS 64742-49-0 Naphtha (Petroleum) Hydrotreated Light, 25-50% BP 60-80°C D 0.670 FP < -20°C NFPA 1-3-0 Storage Code: RED IMO Petroleum Distillates N.O.S (Petroleum Ether), 3, UN1268, PG II
certified pr1427
specifications Boiling Range Passes Test Color (APHA) Max. 10 Residue after Evaporation Max. 0.001 %
packaging product number Unit size case size PR1427-065 1L 1L Amber Glass PR1427-002 1L 6x1L Amber Glass PR1427-048 4L 4L Amber Glass PR1427-001 4L 4x4L Amber Glass
PHENOl C
6H
5OH FW 94.11 CAS 108-95-2
Merck Index 13,7323 FP 74°C NFPA 4-2-0 Storage Code: BLUE IMO Phenol, Solid, 6.1, UN1671, PG II
bio, fUsed crystal pb1429
Suitable for Extraction of Nucleic Acids
specifications Clarity of Solution Passes Test Assay Min. 99.5 % Residue after Evaporation Max. 0.05 % Water Max. 0.15 % Melting Point Min. 40.5°C
packaging product number Unit size case size PB1429-074 1Kg 1Kg Poly Bottle PB1429-028 500g 500g Amber Glass
certified, liQUified pr1430
specifications Assay Min. 88 % Residue after Evaporation Max. 0.05 %
packaging product number Unit size case size PR1430-065 1L 1L Amber Glass PR1430-002 1L 6x1L Amber Glass PR1430-048 4L 4L Amber Glass PR1430-001 4L 4x4L Amber Glass
acs, loose crystals pr4131
specifications Assay Min. 99.0 % Clarity of Solution Passes Test Freezing Point Min. 40.5°C Residue after Evaporation Max. 0.05 % Water Max. 0.5 %
packaging product number Unit size case size PR4131-074 1Kg 1Kg Poly Bottle PR4131-028 500g 500g Amber Glass PR4131-017 500g 6x500g Amber Glass
2-PHENOxYETHANOlSee Ethylene Glycol Monophenyl Ether
PHENYlAMINESee Aniline
PHENYlMETHANESee Toulene
PHENYlMETHANOlSee Benzyl Alcohol
PHENYl METHYl KETONESee Acetophenone
PHOSPHORIC ACID 85% H
3PO
4 FW 98.00 CAS 7664-38-2
BP 158°C D 1.687 Merck Index 13,7430 NFPA 3-0-0 Storage Code: WHITE IMO Phosphoric Acid, Liquid, 8, UN1805, PG III
acs pr1435
Meets reagent specifications for testing USP/NF monographs.
specifications Antimony (Sb) Max. 0.002 % Arsenic (As) Max. 1 ppm Assay Min. 85.0 % Calcium (Ca) Max. 0.002 % Chloride (Cl) Max. 3 ppm Color (APHA) Max. 10 Heavy Metals (as Pb) Max. 0.001 % Insoluble Matter Max. 0.001 % Iron (Fe) Max. 0.003 % Magnesium (Mg) Max. 0.002 % Manganese (Mn) Max. 0.5 ppm Nitrate Max. 5 ppm Potassium (K) Max. 0.005 %
147
Reducing Substances Passes Test Sodium (Na) Max. 0.025 % Sulfate Max. 0.003 % Volatile Acids (as Acetic Acid) Max. 0.001 %
packaging product number Unit size case size PR1435-059 2.5L 2.5L Amber Glass PR1435-014 2.5L 4x2.5L Amber Glass PR1435-053 500ml 500ml Amber Glass PR1435-013 500ml 6x500ml Amber Glass
hplc ps1434
For Use in Liquid Chromatography Meets ACS specifications.
specifications Antimony (Sb) Max. 0.002 % Arsenic (As) Max. 1 ppm Assay Min. 85.0 % Calcium (Ca) Max. 0.002 % Chloride (Cl) Max. 3 ppm Color (APHA) Max. 10 Heavy Metals (as Pb) Max. 0.001 % Insoluble Matter Max. 0.001 % Iron (Fe) Max. 0.003 % Magnesium (Mg) Max. 0.002 % Manganese (Mn) Max. 0.5 ppm Nitrate Max. 5 ppm Potassium (K) Max. 0.005 % Reducing Substances Passes Test Sodium (Na) Max. 0.025 % Sulfate Max. 0.003 % Volatile Acids (as Acetic Acid) Max. 0.001 % Optical Absorbance at 220 nm Max. 0.05 254 nm Max. 0.04 300 nm Max. 0.02
packaging product number Unit size case size PS1434-065 1L 1L Amber Glass PS1434-002 1L 6x1L Amber Glass
PHOSPHORUS OxYCHlORIDEH
3PO
4 FW 98.00 CAS 7664-38-2
BP 158°C D 1.687 Merck Index 13,7430 NFPA 4-0-2 Storage Code: WHITE IMO Phosphorus Oxychloride, 8, UN1810, PG II
certified pr1440
specifications Assay Min. 98 %
packaging product number Unit size case size PR1440-004 1Kg 6x1Kg Amber Glass
PIMElIC KETONESee Cyclohexanone
PIPERIDINE (CH
2)
5NH FW 85.15 CAS 110-89-4
MP -13°C BP 106°C D 0.861 Merck Index 13,7549 FP 4°C NFPA 3-3-0 Storage Code: RED IMO Piperidine, 8, UN2401, PG II
certified pr1447
specifications Assay Min. 99.0 % Water Max. 0.20 %
packaging product number Unit size case size PR1447-065 1L 1L Amber Glass PR1447-002 1L 6x1L Amber Glass PR1447-048 4L 4L Amber Glass PR1447-001 4L 4x4L Amber Glass
Pet-Pip
148POlYOxYETHYlENE (10) ISOOCTYlPHENYl ETHERSee Triton X-100
POlYOxYETHYlENE (40) ISOOCTYlPHENYl ETHERSee Triton X-405
POlYOxYETHYlENE (20) SORbITAN MONOlAURATESee Tween 20
POlYOxYETHYlENE (20) SORbITAN MONOOlEATESee Tween 80
POlYOxYETHYlENE (20) SORbITAN MONOPAlMITATESee Tween 40
POlYOxYETHYlENE (20) SORbITAN MONOSTERATESee Tween 60
POlYxYETHYlENE (20) SORbITAN TRIOlEATESee Tween 85
POTASSIUM PHOSPHATE MONObASIC(POTASSIUM DIHYDROGEN PHOSPHATE)
KH2PO
4 FW 136.09 CAS 7778-77-0
Merck 13,7744 NFPA 0-0-0 Storage Code: GREEN
hplc ps4170
For Use in High Performance Liquid Chromatography Meets ACS Specifications.
specifications Assay Min. 99.0 % Chloride (Cl) Max. 0.001 % Heavy Metals (as Pb) Max. 0.001 % Insoluble Matter Max. 0.01 % Iron (Fe) Max. 0.002 % Loss on Drying Max. 0.2 % Nitrogen Compounds (as N) Max. 0.001 % pH of a 5% Solution at 25ºC 4.1 - 4.5
Sodium (Na) Max. 0.005 % Sulfate Max. 0.003 % Optical Absorbance of a 1M solution at 245 nm Max. 0.04
packaging product number Unit size case size ps4170-022 1kg 1kg amber glass ps4170-004 1kg 6x1kg amber glass ps4170-028 500g 500g amber glass ps4170-017 500g 6x500g amber glass
1,2-PROPANEDIOlSee Propylene Glycol
1,2-PROPANEDIOl CYClIC CARbONATESee Propylene Carbonate
1,3-PROPANEDIOl(TRIMETHYLENE GLYCOL)
HO(CH2)
3OH FW 76.10 CAS 504-63-2
MP -27°C BP 214°C D 1.053 Merck Index 13,9786 FP 79°C NFPA 1-1-0 Storage Code: GREEN
certified pr4175
specifications Assay Min. 98.0 %
packaging product number Unit size case size PR4175-053 500ml 500ml Amber Glass PR4175-013 500ml 6x500ml Amber Glass
1,2,3-PROPANETRIOlSee Glycerol
PROPANOIC ACIDSee Propionic Acid
1-PROPANOlSee n-Propyl Alcohol
2-PROPANOlSee Isopropyl Alcohol
2-PROPANONESee Acetone
149PROPIONAlDEHYDE C
2H
5CHO FW 58.08 CAS 123-38-6
MP -81°C BP 46-50°C D 0.805 Merck Index 13,7915 FP -26°C NFPA 2-3-2 Storage Code: RED IMO Propionaldehyde, 3, UN1275, PG II
certified pr1487
specifications Assay Min. 97.0 %
packaging product number Unit size case size PR1487-065 1L 1L Amber Glass PR1487-002 1L 6x1L Amber Glass PR1487-048 4L 4L Amber Glass PR1487-001 4L 4x4L Amber Glass
PROPIONIC ACID C
2H
5CO
2H FW 74.08 CAS 79-09-4
BP 141°C D 0.993 Merck Index 13,7917 FP 51°C NFPA 3-2-0 Storage Code: WHITE IMO Propionic Acid, 3, UN1848, PG III
certified pr1488
specifications Assay Min. 99.0 % Residue after Evaporation Max. 0.01 % Water Max. 0.15 %
packaging product number Unit size case size PR1488-065 1L 1L Amber Glass PR1488-002 1L 6x1L Amber Glass PR1488-048 4L 4L Amber Glass PR1488-001 4L 4x4L Amber Glass
1-PROPOxY-2-PROPANOlSee Propylene Glycol Propyl Ether
n-PROPYl AlCOHOl(1-PROPANOL, n-PROPANOL)
CH3CH
2CH
2OH FW 60.10 CAS 71-23-8
MP -127°C BP 97°C D 0.804 Merck Index 13,7934 FP 15°C NFPA 1-3-0 Storage Code: RED IMO Propanol (Propyl Alcohol, Normal), 3, UN1274, PG II
physical properties Boiling Point (760mm) 97°C Density (g/ml) at 25°C 0.804 Dielectric Constant at 25°C 20.33 Refractive Index (n20°/D) 1.384 Viscosity (cps) at 20°C 2.256
acs pr1491
Meets reagent specifications for testing USP/NF monographs.
specifications Assay Min. 99.5 % Carbonyl Compounds (as Propionaldehyde) Max. 0.03 % Color (APHA) Max. 10 Ethyl Alcohol Max. 0.01 % Isopropyl Alcohol Max. 0.05 % Methyl Alcohol Max. 0.01 % Residue after Evaporation Max. 0.001 % Solubility in Water Passes Test Titrable Acid Max. 0.0004 meq/g Water Max. 0.2 %
packaging product number Unit size case size PR1491-065 1L 1L Amber Glass PR1491-002 1L 6x1L Amber Glass PR1491-048 4L 4L Amber Glass PR1491-001 4L 4x4L Amber Glass
hplc/spectro ps2041
For Use in Liquid Chromatography and Spectrophotometry Packaged under Nitrogen. Submicron filtered.
specifications Assay Min. 99.5 % Color (APHA) Max. 10 Residue after Evaporation Max. 5 ppm Water Max. 0.08 % Optical Absorbance at 210 nm Max. 1.00 225 nm Max. 0.50 250 nm Max. 0.05 300 nm Max. 0.005 400 nm Max. 0.005
packaging product number Unit size case size PS2041-065 1L 1L Amber Glass PS2041-002 1L 6x1L Amber Glass PS2041-048 4L 4L Amber Glass PS2041-001 4L 4x4L Amber Glass
iso-PROPYl ETHERSee Isoprpyl Ether
Pol-Pro
150PROPYlENE CARbONATE(1,2-PROPANEDIOL CYCLIC CARBONATE)
C4H
6O
3 FW 102.09 CAS 108-32-7
MP >-55°C BP 240°C D 1.189 FP 132°C NFPA 1-1-0 Storage Code: GREEN
anhydrosolv ph3915
Packaged under Nitrogen in Septum Sealed Bottle
specifications Assay Min. 99.7 % Water Max. 50 ppm
packaging product number Unit size case size PH3915-174 100ml 100ml Amber Glass with Septum Seal PH3915-100 100ml 6x100ml Amber Glass with Septum Seal PH3915-150 1L 6x1L Amber Glass with Septum Seal PH3915-041 1L 1L Amber Glass with Septum Seal
certified pr4301
specifications Assay Min. 99.0 %
packaging product number Unit size case size PR4301-065 1L 1L Amber Glass PR4301-002 1L 6x1L Amber Glass PR4301-048 4L 4L Amber Glass PR4301-001 4L 4x4L Amber Glass
PROPYlENE GlYCOl(1,2-PROPANEDIOL)
CH3CH(OH)CH
2OH FW 76.10 CAS 57-55-6
MP -60°C BP 187°C D 1.036 Merck Index 13,7947 FP 107°C NFPA 0-1-0 Storage Code: GREEN
acs pr1494
specifications Assay Min. 99.5 % Chloride (Cl) Max. 1 ppm Color (APHA) Max. 10 Residue after Ignition Max. 0.005 % Titrable Acid Max. 0.0005 meq/g Water Max. 0.2 %
packaging product number Unit size case size PR1494-065 1L 1L Amber Glass PR1494-002 1L 6x1L Amber Glass
PR1494-048 4L 4L Amber Glass PR1494-001 4L 4x4L Amber Glass
PROPYlENE GlYCOl MONOMETHYl ETHER(1-METHOxY-2-PROPANOL)
CH3CH(OH)CH
2OCH
3 FW 90.12 CAS 107-98-2
BP 118-119°C D 0.922 FP 33°C NFPA 0-3-0 Storage Code: RED IMO 1-Methoxy 2- propanol, 3, UN3092, PG III
certified pr1493
specifications Assay Min. 99.0 %
packaging product number Unit size case size PR1493-065 1L 1L Amber Glass PR1493-002 1L 6x1L Amber Glass PR1493-048 4L 4L Amber Glass PR1493-001 4L 4x4L Amber Glass
PROPYlENE GlYCOl MONOMETHYl ETHER ACETATE(1-METHOxY-2-PROPYL ACETATE)
CH3CO
2CH(CH
3)CH
2OCH
3
FW 132.16 CAS 108-65-6 BP 145-146°C D 0.968 FP 43°C NFPA 0-2-0 Storage Code: RED
151certified pr1497
specifications Assay Min. 99.0 %
packaging product number Unit size case size PR1497-065 1L 1L Amber Glass PR1497-002 1L 6x1L Amber Glass PR1497-048 4L 4L Amber Glass PR1497-001 4L 4x4L Amber Glass
PROPYlENE GlYCOl PROPYl ETHER(1-PROPOxY-2-PROPANOL)
CH3CH
2CH
2OCH
2CH(OH)CH
3
FW 118.18 CAS 1569-01-3 BP 140-160°C D 0.885 FP 48°C NFPA 0-2-0 Storage Code: RED
certified pr4179
(Mixture of Isomers)
specifications Assay Min. 99.0 %
packaging product number Unit size case size PR4179-065 1L 1L Amber Glass PR4179-002 1L 6x1L Amber Glass PR4179-048 4L 4L Amber Glass PR4179-001 4L 4x4L Amber Glass
PROPYlENE OxIDE(1,2-EPOxYPROPANE)
CH3CH(OH)CH
2OH FW 58.08 CAS 75-56-9
MP -112°C BP 34°C D 0.830 Merck Index 13,7948 FP -37°C NFPA 3-4-2 Storage Code: RED Cancer Suspect Agent IMO Propylene Oxide, 3, UN1280, PG I
certified pr1496
specifications Assay Min. 98.0 % Color (APHA) Max. 10 Water Max. 0.1 %
packaging product number Unit size case size PR1496-065 1L 1L Amber Glass PR1496-002 1L 6x1L Amber Glass
PSEUDOCUMENESee 1,2,4-Trimethylbenzene
PYRIDINE C
5H
5N FW 79.10 CAS 110-86-1
MP -42°C BP 115°C D 0.978 Merck Index 13,8060 FP 20°C NFPA 3-3-0 Storage Code: RED IMO Pyridine, 3, UN1282, PG II
physical properties Boiling Point (760mm) 115°C Density (g/ml) at 25°C 0.978 Dielectric Constant at 20°C 12.4 Elutropic Value (Silica) 0.55 Refractive Index (n20°/D) 1.51 Viscosity (cps) at 20°C 0.94
acs pr1498
Suitable for Karl Fischer Reagent. Meets reagent specifications for testing USP/NF monographs.
specifications Ammonia Max. 0.002 % Assay Min. 99.0 % Chloride (Cl) Max. 0.001 % Copper (Cu) Max. 5 ppm Reducing Substances Passes Test Residue after Evaporation Max. 0.002 % Solubility in Water Passes Test Sulfate Max. 0.001 % Water Max. 0.1 %
packaging product number Unit size case size PR1498-065 1L 1L Amber Glass PR1498-002 1L 6x1L Amber Glass PR1498-073 4L 4L PVC Coated Amber Glass PR1498-048 4L 4L Amber Glass PR1498-006 4L 4x4L PVC Coated Amber Glass PR1498-001 4L 4x4L Amber Glass
Pyr-Rea
152PYRIDINE (CONTINUED)
acs plUs pr2587
Meets reagent specifications for testing USP/NF monographs.
specifications Ammonia (NH
3) Max. 0.002 %
Chloride (Cl) Max. 0.001 % Copper (Cu) Max. 5 ppm Assay Min. 99.0 % Residue after Evaporation Max. 0.002 % Water Max. 0.1 % Reducing Substances Passes Test Solubility in Water Passes Test Sulfate (SO
4) Max. 0.001 %
Tracemetals Aluminum (Al) Max. 0.5 ppm Barium (Ba) Max. 0.1 ppm Boron (B) Max. 0.02 ppm Cadmium (Cd) Max. 0.05 ppm Calcium (Ca) Max. 0.5 ppm Chromium (Cr) Max. 0.02 ppm Cobalt (Co) Max. 0.02 ppm Copper (Cu) Max. 0.02 ppm Iron (Fe) Max. 0.1 ppm Lead (Pb) Max. 0.1 ppm Magnesium (Mg) Max. 0.1 ppm Manganese (Mn) Max. 0.02 ppm Nickel (Ni) Max. 0.02 ppm Tin (Sn) Max. 0.1 ppm Zinc (Zn) Max. 0.1 ppm
packaging product number Unit size case size PR2587-065 1L 1L Amber Glass PR2587-002 1L 6x1L Amber Glass PR2587-048 4L 4L Amber Glass PR2587-001 4L 4x4L Amber Glass
anhydrosolv ph3918
Packaged under Nitrogen in Septum Sealed Bottle
specifications Appearance (clear, colorless liquid) Passes Test Assay Min. 99.8 % Color (APHA) Max. 10 Residue after Evaporation Max. 5 ppm Water Max. 30 ppm
packaging product number Unit size case size PH3918-174 100ml 100ml Amber Glass with Septum Seal PH3918-100 100ml 6x100ml Amber Glass with Septum Seal PH3918-150 1L 6x1L Amber Glass with Septum Seal PH3918-041 1L 1L Amber Glass with Septum Seal
bio pb2050
For Biotech Applications Packaged under Nitrogen. Submicron filtered.
specifications Amines ( by Ninhydrin test) Max. 10 ppm Assay Min. 99.0 % Chloride (Cl) Passes Test Color (APHA) Max. 10 Reducing Substances Passes Test Residue after Evaporation Max. 5 ppm Water Max. 0.01 % Solubility in Water Passes Test Optical Absorbance at 330 nm Max. 1.00 340 nm Max. 0.10 350 nm Max. 0.01 375 nm Max. 0.01 400 nm Max. 0.01
packaging product number Unit size case size PB2050-048 4L 4L Amber Glass PB2050-001 4L 4x4L Amber Glass
certified pr1499
specifications Assay Min. 99.5 % Color (APHA) Max. 20 Water Max. 0.1 %
packaging product number Unit size case size PR1499-065 1L 1L Amber Glass PR1499-002 1L 6x1L Amber Glass PR1499-048 4L 4L Amber Glass PR1499-001 4L 4x4L Amber Glass
hplc/spectro ps2051
For Use in Liquid Chromatography and Spectrophotometry Packaged under Nitrogen. Submicron filtered.
specifications Assay Min. 99.8 % Color (APHA) Max. 10 Residue after Evaporation Max. 4 ppm Water Max. 0.05 % Optical Absorbance at 315 nm Max. 1.00 320 nm Max. 0.50 325 nm Max. 0.20 340 nm Max. 0.10 350 nm Max. 0.01 400 nm Max. 0.01
packaging product number Unit size case size PS2051-065 1L 1L Amber Glass PS2051-002 1L 6x1L Amber Glass PS2051-073 4L 4L PVC Coated Amber Glass
153
PS2051-048 4L 4L Amber Glass PS2051-006 4L 4x4L PVC Coated Amber Glass PS2051-001 4L 4x4L Amber Glass
2-PYRROlIDONESee 2-Pyrrolidinone
2-PYRROlIDINONE (2-PYRROLIDONE)
C4H
7NO FW 85.11 CAS 616-45-5
MP 23-25°C BP 245°C D 1.120 Merck Index 13,8106 FP 110°C NFPA 2-1-0 Storage Code: GREEN
certified pr1503
specifications Assay Min. 99.0 %
packaging product number Unit size case size PR1503-065 1L 1L Amber Glass PR1503-002 1L 6x1L Amber Glass PR1503-048 4L 4L Amber Glass PR1503-001 4L 4x4L Amber Glass
qUINOlINE C
9H
7N FW 129.16 CAS 91-22-5
MP -16 TO 15°C BP 113-114°C/17mm D 1.093 Merck Index 13,8160 FP 101°C NFPA 2-1-0 Storage Code: BLUE IMO Quinoline, 6.1, UN2656, PG III
certified Qr1505
specifications Assay Min. 98.0 % Water Max. 0.1 %
packaging product number Unit size case size QR1505-065 1L 1L Amber Glass QR1505-002 1L 6x1L Amber Glass QR1505-048 4L 4L Amber Glass QR1505-001 4L 4x4L Amber Glass
REAGENT AlCOHOlSee Alcohol Anhydrous
SODIUM ACETATE TRIHYDRATE CH
3CO
2Na • 3H
2O FW 136.08 CAS 6131-90-4
Merck Index 13,8513 NFPA 0-0-0 Storage Code: GREEN
Pyr-Sod
154SODIUM ACETATE TRIHYDRATE (CONTINUED)
hplc ss1713
For Use in High Performance Liquid Chromatography Meets ACS Specifications.
specifications Assay 99.0 - 101 % Calcium (Ca) Max. 0.005 % Chloride (Cl) Max. 0.001 % Heavy Metals (as Pb) Max. 5 ppm Insoluble Matter Max. 0.005 % Iron (Fe) Max. 5 ppm Magnesium (Mg) Max. 0.002 % pH of a 5% Solution at 25ºC 7.5 - 9.2 Phosphate Max. 5 ppm Potassium (K) Max. 0.005 % Substances Reducing Permanganate Passes Test Sulfate Max. 0.002 % Optical Absorbance of a 1M solution at 254 nm Max. 0.02
packaging product number Unit size case size SS1713-022 1Kg 1Kg Amber Glass SS1713-004 1Kg 6x1Kg Amber Glass SS1713-028 500g 500g Amber Glass SS1713-017 500g 6x500g Amber Glass
SODIUM bICARbONATE(SODIUM HYDROGEN CARBONATE)
Na2HCO
3 FW 105.99 CAS 144-55-8
Merck Index 13,8655 NFPA 0-0-0 Storage Code: GREEN
hplc ss4178
For Use in High Performance Liquid Chromatography Meets ACS specifications.
specifications Ammonium Max. 5 ppm Assay 99.7 - 100.3 % Calcium (Ca) Max. 0.02 % Chloride (Cl) Max. 0.003 % Heavy Metals (as Pb) Max. 5 ppm Insoluble Matter Max. 0.015 % Iron (Fe) Max. 0.001 % Magnesium (Mg) Max. 0.005 % Phosphate Max. 0.001 % Potassium (K) Max. 0.005 % Sulfur Compounds (as Sulfate) Max. 0.003 % Optical Absorbance at 254 nm Max. 0.05 280 nm Max. 0.02 350 nm Max. 0.01
packaging product number Unit size case size SS4178-022 1Kg 1Kg Amber Glass SS4178-004 1Kg 6x1Kg Amber Glass SS4178-028 500g 500g Amber Glass SS4178-017 500g 6x500g Amber Glass
SODIUM 1-bUTANESUlFONATESee Butanesulfonic Acid, Sodium Salt
SODIUM1-DECANESUlFONATESee 1-Decanesulfonic Acid, Sodium Salt
155SODIUM1-DODECANESUlFONATESee 1-Decanesulfonic Acid, Sodium Salt
SODIUM1-HEPTANESUlFONATESee 1-Heptanesulfonic Acid, Sodium Salt
SODIUM1-HExANESUlFONATESee 1-Hexanesulfonic Acid, Sodium Salt
SODIUM HYDROGENCARbONATESee Sodium Bicarbonate
SODIUM1-OCTANESUlFONATESee 1-Octanesulfonic Acid, Sodium Salt
SODIUM1-PENTANESUlFONATESee 1-Pentanesulfonic Acid, Sodium Salt
SODIUM SUlFATE ANHYDROUS (GRANUlAR) Na
2SO
4 FW 142.04 CAS 7757-82-6
Merck Index 13,8755 NFPA 0-0-0 Storage Code: GREEN
pesticide sr3773
For Use in Pesticide Residue Analysis. Tested for Hexane Extractable Impurities. Also Meets ACS Specifications.
specifications Assay Min. 99.0 % Calcium (Ca) Max. 0.01 % Chloride (Cl) Max. 0.001 % Heavy Metals (as Pb) Max. 5 ppm Insoluble Matter Max. 0.01 % Iron (Fe) Max. 0.001 % Loss on Ignition Max. 0.5 % Magnesium (Mg) Max. 0.005 % Nitrogen Compounds (as N) Max. 5 ppm pH of a 5% Solution at 25ºC 5.2 - 9.2 Phosphate Max. 0.001 % Potassium (K) Max. 0.01 % Suitability for use in EPA method 608 Passes Test
packaging product number Unit size case size SR3773-061 2.5Kg 2.5Kg Poly Bottle SR3773-026 2.5Kg 4x2.5Kg Poly Bottle SR3773-028 500g 500g Amber Glass SR3773-017 500g 6x500g Amber Glass
SUlFURIC ACID H
2SO
4 FW 98.08 CAS 7664-93-9
D 1.840 Merck Index 13,9064 NFPA 3-0-2 W Storage Code: WHITE IMO Sulfuric Acid, 8, UN1830, PG II
acs sr1789
Meets reagent specifications for testing USP/NF monographs.
specifications Ammonium Max. 2 ppm Appearance Passes Test Arsenic (As) Max. 0.01 ppm Assay 95.0 - 98.0 % Chloride (Cl) Max. 0.2 ppm Color (APHA) Max. 10 Heavy Metals (as Pb) Max. 1 ppm Iron (Fe) Max. 0.2 ppm Mercury (Hg) Max. 5 ppb Nitrate Max. 0.5 ppm Residue after Ignition Max. 5 ppm Substances Reducing Permanganate Passes Test
packaging product number Unit size case size SR1789-058 2.5L 2.5L Flint Glass SR1789-011 2.5L 4x2.5L Flint Glass SR1789-071 500ml 500ml Flint Glass SR1789-068 500ml 6x500ml Flint Glass
Sod-Sul
156SUlFURIC ACID(CONTINUED)
traceMetal se4281
Concentration of some elements may change over time due to storage in glass container.
specifications Assay (Sulfuric Acid) 94 - 98 % Color (APHA) Max. 10 Chloride (Cl) Max. 0.7 ppm Total Phosphorus (P) Max. 0.05 ppm Nitrate (NO3) Max. 0.2 ppm Substances Reducing Permanganate Max. 20 ppm Aluminum (Al) Max. 1 ppb Antimony (Sb) Max. 1 ppb Arsenic (As) Max. 1 ppb Barium (Ba) Max. 1 ppb Beryllium (Be) Max. 1 ppb Bismuth (Bi) Max. 1 ppb Cadmium (Cd) Max. 1 ppb Calcium (Ca) Max. 1 ppb Cerium (Ce) Max. 0.5 ppb Cesium (Cs) Max. 0.5 ppb Chromium (Cr) Max. 1 ppb Cobalt (Co) Max. 1 ppb Copper (Cu) Max. 1 ppb Dysprosium (Dy) Max. 0.5 ppb Erbium (Er) Max. 0.5 ppb Europium (Eu) Max. 0.5 ppb Gadolinium (Gd) Max. 0.5 ppb Gallium (Ga) Max. 1 ppb Germanium (Ge) Max. 1 ppb Hafnium (Hf ) Max. 0.5 ppb Holmium (Ho) Max. 0.5 ppb Indium (In) Max. 0.5 ppb Iron (Fe) Max. 1 ppb Lanthanum (La) Max. 0.5 ppb Lead (Pb) Max. 1 ppb Lithium (Li) Max. 1 ppb Lutetium (Lu) Max. 0.5 ppb Magnesium (Mg) Max. 1 ppb Manganese (Mn) Max. 1 ppb Mercury (Hg) Max. 1 ppb Molybdenum (Mo) Max. 1 ppb Neodymium (Nd) Max. 0.5 ppb Nickel (Ni) Max. 1 ppb Niobium (Nb) Max. 0.5 ppb Palladium (Pd) Report Only Platinum (Pt) Report Only Potassium (K) Max. 1 ppb Praseodymium (Pr) Max. 0.5 ppb Rhodium (Rh) Max. 0.5 ppb Rubidium (Rb) Max. 0.5 ppb Samarium (Sm) Max. 0.5 ppb Scandium (Sc) Max. 0.5 ppb Selenium (Se) Max. 10 ppb Silver (Ag) Max. 1 ppb Sodium (Na) Max. 1 ppb
Strontium (Sr) Max. 1 ppb Tantalum (Ta) Report Only Tellurium (Te) Max. 0.5 ppb Terbium (Tb) Max. 0.5 ppb Thallium (Tl) Max. 0.5 ppb Thorium (Th) Max. 1 ppb Thulium (Tm) Max. 0.5 ppb Tin (Sn) Max. 1 ppb Titanium (Ti) Max. 1 ppb Tungsten (W) Max. 0.5 ppb Uranium (U) Max. 1 ppb Vanadium (V) Max. 1 ppb Ytterbium (Yb) Max. 0.5 ppb Yttrium (Y) Max. 0.5 ppb Zinc (Zn) Max. 1 ppb Zirconium (Zr) Max. 1 ppb
packaging product number Unit size case size SE4281-058 2.5L 2.5L Flint Glass SE4281-011 2.5L 4x2.5L Flint Glass SE4281-071 500ml 500ml Flint Glass SE4281-068 500ml 6x500ml Flint Glass
traceMetal plUs se4280
Packaged in specially manufactured, precleaned Teflon® FEP bottles to protect product integrity.
specifications Assay (Sulfuric Acid) 93 - 98 % Aluminum (Al) Max. 50 ppt Antimony (Sb) Max. 50 ppt Arsenic (As) Max. 500 ppt Barium (Ba) Max. 10 ppt Beryllium (Be) Max. 10 ppt Bismuth (Bi) Max. 10 ppt Cadmium (Cd) Max. 10 ppt Calcium (Ca) Max. 100 ppt Cerium (Ce) Max. 10 ppt Cesium (Cs) Max. 10 ppt Chromium (Cr) Max. 10 ppt Cobalt (Co) Max. 10 ppt Copper (Cu) Max. 10 ppt Dysprosium (Dy) Max. 10 ppt Erbium (Er) Max. 10 ppt Europium (Eu) Max. 10 ppt Gadolinium (Gd) Max. 10 ppt Gallium (Ga) Max. 10 ppt Germanium (Ge) Max. 100 ppt Hafnium (Hf ) Max. 10 ppt Holmium (Ho) Max. 10 ppt Indium (In) Max. 10 ppt Iron (Fe) Max. 50 ppt Lanthanum (La) Max. 10 ppt Lead (Pb) Max. 10 ppt Lithium (Li) Max. 10 ppt Lutetium (Lu) Max. 10 ppt Magnesium (Mg) Max. 50 ppt Manganese (Mn) Max. 10 ppt Mercury (Hg) Max. 100 ppt
157 Molybdenum (Mo) Max. 10 ppt Neodymium (Nd) Max. 10 ppt Nickel (Ni) Max. 50 ppt Niobium (Nb) Max. 10 ppt Palladium (Pd) Report Only Platinum (Pt) Report Only Potassium (K) Max. 50 ppt Praseodymium (Pr) Max. 10 ppt Rhodium (Rh) Max. 50 ppt Rubidium (Rb) Max. 10 ppt Samarium (Sm) Max. 10 ppt Scandium (Sc) Max. 10 ppt Selenium (Se) Max. 500 ppt Silver (Ag) Max. 50 ppt Sodium (Na) Max. 50 ppt Strontium (Sr) Max. 10 ppt Tantalum (Ta) Report Only Tellurium (Te) Max. 100 ppt Terbium (Tb) Max. 10 ppt Thallium (Tl) Max. 10 ppt Thorium (Th) Max. 10 ppt Thulium (Tm) Max. 10 ppt Tin (Sn) Max. 50 ppt Titanium (Ti) Max. 50 ppt Tungsten (W) Max. 10 ppt Uranium (U) Max. 10 ppt Vanadium (V) Max. 10 ppt Ytterbium (Yb) Max. 10 ppt Yttrium (Y) Max. 10 ppt Zinc (Zn) Max. 50 ppt Zirconium (Zr) Max. 10 ppt
packaging product number Unit size case size SE4280-030 1L 1L Teflon Bottle SE4280-042 250ml 250ml Teflon Bottle SE4280-029 500ml 500ml Teflon Bottle
1,1,2,2-TETRAbROMOETHANE Br
2CHCHBr
2 FW 345.67 CAS 79-27-6
MP -1 to 1°C BP 119°C/15 mm D 2.967 Merck Index 13,9261 NFPA 3-0-1 Storage Code: BLUE IMO Tetrabromoethane, 6.1, UN2504, PG III
certified tr1817
specifications Assay Min. 98.0 %
packaging product number Unit size case size TR1817-065 1L 1L Amber Glass TR1817-002 1L 6x1L Amber Glass TR1817-048 4L 4L Amber Glass TR1817-001 4L 4x4L Amber Glass
TETRAbUTYlAMMONIUM DIHYDROGEN PHOSPHATESee Tetrabutylammonium Phosphate
TETRAbUTYlAMMONIUM bROMIDE (CH
3CH
2CH
2CH
2)
4NBr FW 322.38 CAS 1643-19-2
NFPA 2-0-0 Storage Code: GREEN
hplc ts3432
For Use in Ion-Pair Chromatography
specifications Assay Min. 99.0 % Optical Absorbance at 240 nm Max. 0.04 250 nm Max. 0.03 260 nm Max. 0.02
packaging product number Unit size case size TS3432-019 100g 100g Amber Glass TS3432-009 25g 25g Amber Glass
TETRAbUTYlAMMONIUM HYDROGEN SUlFATE (CH
3CH
2CH
2CH
2)
4NHSO
4
FW 339.54 CAS 32503-27-8 NFPA 2-0-0 Storage Code: GREEN IMO Tetrabutylammonium Hydrogen Sulfate, 8, UN3261, PG II
certified tr3433
specifications Assay Min. 98 % Melting Range 169-173°C
packaging product number Unit size case size TR3433-019 100g 100g Amber Glass TR3433-028 500g 500g Amber Glass
hplc ts3434
For Use in Ion-Pair Chromatography
specifications Assay Min. 99.0 % Optical Absorbance of a 0.1% Solution at 210 nm Max. 0.05 220 nm Max. 0.04 230 nm Max. 0.03 260 nm Max. 0.02
packaging product number Unit size case size TS3434-019 100g 100g Amber Glass TS3434-009 25g 25g Amber Glass
Sul-Tet
158TETRAbUTYlAMMONIUM HYDROxIDE IN WATER (1M) (CH
3CH
2CH
2CH
2)
4NOH FW 259.48 CAS 2052-49-5
NFPA 3-0-0 Storage Code: WHITE IMO Corrosive Liquid, Basic, Organic, N.O.S. (Tetrabutylammonium Hydroxide), 8, UN3267, PG III
hplc ts1819
For Use in Ion-Pair Chromatography Meets reagent specifications for testing USP/NF monographs
specifications Assay, Molarity 0.98 - 1.02 Solution Test Passes Test Optical Absorbance of a 0.1M solution at 240 nm Max. 0.15 245 nm Max. 0.10 254 nm Max. 0.07 280 nm Max. 0.04 300 nm Max. 0.04
packaging product number Unit size case size TS1819-066 4L 4L Poly Bottle TS1819-070 500ml 500ml Poly Bottle
TETRAbUTYlAMMONIUM PHOSPHATE(TETRABUTYLAMMONIUM DIHYDROGEN PHOSPHATE)
(CH3CH
2CH
2CH
2)
4NH
2PO
4
FW 339.46 CAS 5574-97-9 NFPA 1-1-0 Storage Code: GREEN
hplc ts3435
For Use in Ion-Pair Chromatography
specifications Assay Min. 97.0 % Optical Absorbance at 196 nm Max. 1.00 200 nm Max. 0.21 210 nm Max. 0.15 215 nm Max. 0.01 400 nm Max. 0.01
packaging product number Unit size case size TS3435-009 25g 25g Amber Glass
1,1,2,2-TETRACHlOROETHANE Cl
2CHCHCl
2 FW 167.85 CAS 79-34-5
BP 147°C D 1.586 Merck Index 13,9264 NFPA 3-0-0 Storage Code: BLUE IMO 1,1,2,2-Tetrachloroethane, 6.1, UN1702, PG II
certified tr1818
specifications Assay Min. 98.0 % Color (APHA) Max. 30 Free Halogens Passes Test Water Max. 0.075 %
packaging product number Unit size case size TR1818-065 1L 1L Amber Glass TR1818-002 1L 6x1L Amber Glass TR1818-048 4L 4L Amber Glass TR1818-001 4L 4x4L Amber Glass
TETRACHlOROETHYlENE Cl
2C=CCl
2 FW 165.83 CAS 127-18-4
MP -22°C BP 121°C D 1.623 Merck Index 13,9265 NFPA 2-0-0 Storage Code: BLUE Marine Pollutant; Cancer Suspect Agent IMO Tetrachloroethylene, 6.1, UN1897, PG III
physical properties Boiling Point (760mm) 121°C Density (g/ml) at 25°C 1.623 Refractive Index (n20°/D) 1.5056 Viscosity (cps) at 20°C 0.9
acs tr1820
specifications Assay Min. 99.0 % Color (APHA) Max. 10 Residue after Evaporation Max. 5 ppm Water Max. 0.05 %
packaging product number Unit size case size TR1820-065 1L 1L Amber Glass TR1820-002 1L 6x1L Amber Glass TR1820-007 20L 20L Metal Pail TR1820-048 4L 4L Amber Glass TR1820-001 4L 4x4L Amber Glass
hplc/spectro ts2111
For Use in Liquid Chromatography and Spectrophotometry Packaged under Nitrogen. Submicron filtered.
specifications Assay Min. 99.0 % Color (APHA) Max. 10 Residue after Evaporation Max. 5 ppm Water Max. 0.05 % Optical Absorbance at 290 nm Max. 1.00 295 nm Max. 0.30 305 nm Max. 0.10 350 nm Max. 0.05 400 nm Max. 0.03
159 packaging product number Unit size case size TS2111-065 1L 1L Amber Glass TS2111-002 1L 6x1L Amber Glass TS2111-048 4L 4L Amber Glass TS2111-001 4L 4x4L Amber Glass
tech tr1821
specifications Assay Min. 99.0 %
packaging product number Unit size case size TR1821-007 20L 20L Metal Pail TR1821-048 4L 4L Amber Glass TR1821-001 4L 4x4L Amber Glass
TETRAHEPTYlAMMONIUM bROMIDE [CH
3(CH
2)
6]
4NBr FW 490.71 CAS 4368-51-8
NFPA 2-0-0 Storage Code: GREEN
hplc ts3437
For Use in Ion-Pair Chromatography
specifications Assay Min. 99.0 % Optical Absorbance of 10% in Methanol at 240 nm Max. 0.04 250 nm Max. 0.03 260 nm Max. 0.02
packaging product number Unit size case size TS3437-019 100g 100g Amber Glass TS3437-009 25g 25g Amber Glass
TETRAHYDROFURAN (STAbIlIzED) C
4H
8O FW 72.11 CAS 109-99-9
MP -108°C BP 65-67°C D 0.889 Merck Index 13,9285 FP -17°C NFPA 2-3-1 Storage Code: RED IMO Tetrahydrofuran, 3, UN2056, PG II
physical properties Boiling Range (760mm) 65-67°C Density (g/ml) at 25°C 0.886 Dielectric Constant at 20°C 7.58 Elutropic Value (Silica) 0.35 Refractive Index (n20°/D) 1.407 Viscosity (cps) at 20°C 0.55 0.55
acs tr1825
Meets reagent specifications for testing USP/NF monographs. (Stabilized with 0.02-0.03% BHT)
specifications Assay Min. 99.0 % Color (APHA) Max. 20 Peroxides (as Hydrogen Peroxide, at time of packaging) Max. 0.015 % Residue after Evaporation Max. 0.03 % Stabilizer (BHT, w/w %) 0.02 - 0.03 Water Max. 0.05 %
packaging product number Unit size case size TR1825-065 1L 1L Amber Glass TR1825-002 1L 6x1L Amber Glass TR1825-008 204L 204L Metal Drum TR1825-007 20L 20L Metal Pail TR1825-073 4L 4L PVC Coated Amber Glass TR1825-048 4L 4L Amber Glass TR1825-006 4L 4x4L PVC Coated Amber Glass TR1825-001 4L 4x4L Amber Glass
acs plUs tr2591
specifications Assay Min. 99.0 % Residue after Evaporation Max. 0.03 % Water Max. 0.05 % Color (APHA) Max. 20 Stabilizer (BHT) 0.02-0.03 % Peroxide Max. 0.02 % Tracemetals Aluminum (Al) Max. 0.5 ppm Barium (Ba) Max. 0.1 ppm Boron (B) Max. 0.02 ppm Cadmium (Cd) Max. 0.05 ppm Calcium (Ca) Max. 0.5 ppm Chromium (Cr) Max. 0.02 ppm Cobalt (Co) Max. 0.02 ppm Copper (Cu) Max. 0.02 ppm Iron (Fe) Max. 0.1 ppm Lead (Pb) Max. 0.1 ppm Magnesium (Mg) Max. 0.1 ppm Manganese (Mn) Max. 0.02 ppm Nickel (Ni) Max. 0.02 ppm Tin (Sn) Max. 0.1 ppm Zinc (Zn) Max. 0.1 ppm
packaging product number Unit size case size TR2591-065 1L 1L Amber Glass TR2591-002 1L 6x1L Amber Glass TR2591-048 4L 4L Amber Glass TR2591-001 4L 4x4L Amber Glass
Tet-
160TETRAHYDROFURAN (STAbIlIzED)(CONTINUED)
anhydrosolv th3924
Packaged under Nitrogen in Septum Sealed Bottle (Stabilized with 0.02-0.03% BHT)
specifications Assay Min. 99.9 % Water Max. 20 ppm
packaging product number Unit size case size TH3924-174 100ml 100ml Amber Glass with Septum Seal TH3924-100 100ml 6x100ml Amber Glass with Septum Seal TH3924-150 1L 6x1L Amber Glass with Septum Seal TH3924-041 1L 1L Amber Glass with Septum Seal
histological tr1824
For use in Tissue Sampling and Processing (Stabilized with 0.02-0.03% BHT)
specifications Assay Min. 99.0 % Color (APHA) Max. 20 Water Max. 0.5 %
packaging product number Unit size case size TR1824-008 204L 204L Metal Drum TR1824-007 20L 20L Metal Pail TR1824-048 4L 4L Amber Glass TR1824-001 4L 4x4L Amber Glass
hplc ts2123
For Use in Gel Permeation Chromatography Packaged under Nitrogen. Submicron filtered. (Stabilized with 0.02-0.03% BHT)
specifications Assay Min. 99.8 % Color (APHA) Max. 10 Peroxides (as Hydrogen Peroxide, at time of packaging) Max. 0.015 % Residue after Evaporation Max. 0.03 % Stabilizer (BHT, w/w %) 0.02 - 0.03 Water Max. 0.03 %
packaging product number Unit size case size TS2123-065 1L 1L Amber Glass TS2123-002 1L 6x1L Amber Glass TS2123-048 4L 4L Amber Glass TS2123-001 4L 4x4L Amber Glass
anhydrosolv (inhibitor free) th3927
Packaged under Nitrogen in Septum Sealed Bottle (Inhibitor-free)
specifications Appearance (clear, colorless liquid) Passes Test Assay Min. 99.9 % Color (APHA) Max. 10 Peroxide (as H2O2, at time of packaging) Max. 10 ppm Residue after Evaporation Max. 5 ppm Water Max. 30 ppm
packaging product number Unit size case size TH3927-174 100ml 100ml Amber Glass with Septum Seal TH3927-100 100ml 6x100ml Amber Glass with Septum Seal TH3927-150 1L 6x1L Amber Glass with Septum Seal TH3927-041 1L 1L Amber Glass with Septum Seal
bio (inhibitor free) tb2120
For Biotech Application Packaged under Nitrogen. Submicron filtered. (Inhibitor-free)
specifications Assay Min. 99.8 % Color (APHA) Max. 10 Peroxides (as Hydrogen Peroxide, at time of packaging) Max. 0.015 % Residue after Evaporation Max. 5 ppm Water Max. 50 ppm Optical Absorbance at 212 nm Max. 1.00 225 nm Max. 0.50 250 nm Max. 0.17 350 nm Max. 0.01
packaging product number Unit size case size TB2120-048 4L 4L Amber Glass TB2120-001 4L 4x4L Amber Glass
hplc/spectro ts2121
For Use in Liquid Chromatography and Spectrophotometry Packaged under Nitrogen. Submicron filtered. Meets reagent specifications for testing USP/NF monographs. (Inhibitor-free)
specifications Assay Min. 99.8 % Color (APHA) Max. 10 Peroxides (as Hydrogen Peroxide, at time of packaging) Max. 0.015 % Residue after Evaporation Max. 5 ppm
161 Water Max. 0.03 % Optical Absorbance at 212 nm Max. 1.00 225 nm Max. 0.50 250 nm Max. 0.17 350 nm Max. 0.01
packaging product number Unit size case size TS2121-065 1L 1L Amber Glass TS2121-002 1L 6x1L Amber Glass TS2121-073 4L 4L PVC Coated Amber Glass TS2121-048 4L 4L Amber Glass TS2121-006 4L 4x4L PVC Coated Amber Glass TS2121-001 4L 4x4L Amber Glass
10% TETRAMETHYlAMMONIUM HYDROxIDE IN WATER (CH
3)
4NOH FW 91.15 CAS 75-59-2
D 1.000 NFPA 3-0-0 Storage Code: WHITE IMO Tetramethylammonium Hydroxide Solution, 8, UN1835, PG II
certified tr1828
specifications Assay 9.8-10.2 % Residue after Evaporation Max. 0.02 %
packaging product number Unit size case size TR1828-069 100ml 100ml Amber Glass TR1828-025 100ml 6x100ml Amber Glass TR1828-053 500ml 500ml Amber Glass TR1828-013 500ml 6x500ml Amber Glass
TETRAMETHYlAMMONIUM HYDROxIDE (25%) IN METHANOl (CH
3)
4NOH FW 91.15 CAS 75-59-2
D 0.920 NFPA 3-0-0 Storage Code: WHITE IMO Flammable Liquid, Corrosive, N.O.S. (Methanol, Tetramethylammonium Hydroxide), 3 (8), PG II
certified tr1827
specifications Appearance Passes Test Assay (by Acidimetry) (w/v) 24.5 - 25.5 % Chloride (Cl) Max. 2.00 % Color (APHA) Max. 75 Heavy Metals (as Pb) Max. 0.01 %
packaging product number Unit size case size TR1827-069 100ml 100ml Amber Glass TR1827-025 100ml 6x100ml Amber Glass TR1827-053 500ml 500ml Amber Glass TR1827-013 500ml 6x500ml Amber Glass
25% TETRAMETHYlAMMONIUM HYDROxIDE IN WATER (CH
3)
4NOH FW 91.15 CAS 75-59-2
D 1.000 NFPA 3-0-0 Storage Code: WHITE IMO Tetramethylammonium Hydroxide Solution, 8, UN1835, PG II
certified tr1829
specifications Assay 23-25 % Residue after Evaporation Max. 0.02 % Halides (as Cl) Max. 0.05 %
packaging product number Unit size case size TR1829-069 100ml 100ml Amber Glass TR1829-025 100ml 6x100ml Amber Glass TR1829-053 500ml 500ml Amber Glass TR1829-013 500ml 6x500ml Amber Glass
TETRAMETHYlENE GlYCOlSee 1,4-Butanediol
TETRAMETHYlENE OxIDESee Tetrahydrofuran
THFSee Tetrahydrofuran
TOlUENE C
6H
5CH
3 FW 92.14 CAS 108-88-3
MP -93°C BP 110.6°C D 0.865 Merck Index 13,9607 FP 4°C NFPA 2-3-0 Storage Code: RED IMO Toluene, 3, UN1294, PG II
physical properties Boiling Point1 110.6°C Density (g/ml) at 25°C 0.865 Dielectric Constant at 25°C 2.38 Elutropic Value (Silica) 0.22 Refractive Index (n20°/D) 1.496 Viscosity (cps) at 20°C 0.59
Tet-Tol
162TOlUENE(CONTINUED)
absolv ta2131
For Use in Liquid Chromatography, Spectrophotometry, and for Organic Residue Analysis Packaged under Nitrogen.
specifications Assay Min. 99.9 % Color (APHA) Max. 10 Fluorescence Background (as Quinine Sulfate) Max. 1 ppb GC-ECD Responsive Residue ( as Heptachlor Epoxide) Max. 10 ppt GC-FID Responsive Residue (as 2-Octanol) Max. 10 ppb Residue after Evaporation Max. 1 ppm Water Max. 0.02 % Optical Absorbance at 285 nm Max. 1.00 286 nm Max. 0.70 288 nm Max. 0.40 293 nm Max. 0.20 300 nm Max. 0.10 310 nm Max. 0.05 335 nm Max. 0.02 350 nm Max. 0.01 400 nm Max. 0.01
packaging product number Unit size case size TA2131-065 1L 1L Amber Glass TA2131-002 1L 6x1L Amber Glass TA2131-048 4L 4L Amber Glass TA2131-001 4L 4x4L Amber Glass
acs tr1850
Meets reagent specifications for testing USP/NF monographs.
specifications Assay Min. 99.5 % Color (APHA) Max. 10 Residue after Evaporation Max. 0.001 % Substances Darkened by Sulfuric Acid Passes Test Sulfur Compounds (as S) Max. 0.003 % Water Max. 0.03 %
packaging product number Unit size case size TR1850-065 1L 1L Amber Glass TR1850-002 1L 6x1L Amber Glass TR1850-008 204L 204L Metal Drum TR1850-007 20L 20L Metal Pail TR1850-073 4L 4L PVC Coated Amber Glass TR1850-048 4L 4L Amber Glass
TR1850-006 4L 4x4L PVC Coated Amber Glass TR1850-001 4L 4x4L Amber Glass
acs plUs tr2594
Meets reagent specifications for testing USP/NF monographs.
specifications Assay Min. 99.5 % Residue after Evaporation Max. 0.001 % Water Max. 0.03 % Color (APHA) Max. 10 Sulfur Compounds (as S) Max. 0.003 % Substances Darkened by H
2SO
5 Passes Test
Tracemetals Aluminum (Al) Max. 0.5 ppm Barium (Ba) Max. 0.1 ppm Boron (B) Max. 0.02 ppm Cadmium (Cd) Max. 0.05 ppm Calcium (Ca) Max. 0.5 ppm Chromium (Cr) Max. 0.02 ppm Cobalt (Co) Max. 0.02 ppm Copper (Cu) Max. 0.02 ppm Iron (Fe) Max. 0.1 ppm Lead (Pb) Max. 0.1 ppm Magnesium (Mg) Max. 0.1 ppm Manganese (Mn) Max. 0.02 ppm Nickel (Ni) Max. 0.02 ppm Tin (Sn) Max. 0.1 ppm Zinc (Zn) Max. 0.1 ppm
packaging product number Unit size case size TR2594-065 1L 1L Amber Glass TR2594-002 1L 6x1L Amber Glass TR2594-048 4L 4L Amber Glass TR2594-001 4L 4x4L Amber Glass
anhydrosolv th3930
Packaged under Nitrogen in Septum Sealed Bottle
specifications Appearance (clear, colorless liquid) Passes Test Assay Min. 99.8 % Color (APHA) Max. 10 Residue after Evaporation Max. 5 ppm Water Max. 20 ppm
packaging product number Unit size case size TH3930-174 100ml 100ml Amber Glass with Septum Seal TH3930-100 100ml 6x100ml Amber Glass with Septum Seal TH3930-150 1L 6x1L Amber Glass with Septum Seal TH3930-041 1L 1L Amber Glass with Septum Seal
163gc tg2133
For Organic Residue Analysis Packaged under Nitrogen.
specifications Assay Min. 99.8 % Residue after Evaporation Max. 5 ppm Water Max. 0.03 % Color (APHA) Max. 10 GC-ECD Halogenated Residue (as Heptachlor Epoxide) Max. 10 ppt GC-FID Responsive Residue (as 2-Octanol) Max. 10 ppb
packaging product number Unit size case size TG2133-065 1L 1L Amber Glass TG2133-002 1L 6x1L Amber Glass TG2133-048 4L 4L Amber Glass TG2133-001 4L 4x4L Amber Glass
hplc/acs ts3380
For Use in Liquid Chromatography and Spectrophotometry Packaged under Nitrogen. Submicron filtered.
specifications Assay Min. 99.8 % Color (APHA) Max. 10 Residue after Evaporation Max. 4 ppm Substances Darkened by Sulfuric Acid Passes Test Sulfur Compounds (as S) Max. 0.003 % Water Max. 0.03 % Optical Absorbance at 285 nm Max. 1.00 288 nm Max. 0.40 300 nm Max. 0.10 310 nm Max. 0.05 335 nm Max. 0.02 350 nm Max. 0.01 400 nm Max. 0.01
packaging product number Unit size case size TS3380-008 204L 204L Metal Drum
hplc/spectro ts2132
For Use in Liquid Chromatography and Spectrophotometry Packaged under Nitrogen. Submicron filtered. Also meets ACS specifications.
specifications Assay Min. 99.8 % Color (APHA) Max. 10 Residue after Evaporation Max. 4 ppm Substances Darkened by H
2SO
4 Passes Test
Sulfur Compounds (as S) Max. 0.003 % Water Max. 0.03 % Optical Absorbance at 285 nm Max. 1.00 286 nm Max. 0.70
288 nm Max. 0.40 293 nm Max. 0.20 300 nm Max. 0.10 310 nm Max. 0.05 335 nm Max. 0.02 350 nm Max. 0.01 400 nm Max. 0.01
packaging product number Unit size case size TS2132-065 1L 1L Amber Glass TS2132-002 1L 6x1L Amber Glass TS2132-073 4L 4L PVC Coated Amber Glass TS2132-048 4L 4L Amber Glass TS2132-006 4L 4x4L PVC Coated Amber Glass TS2132-001 4L 4x4L Amber Glass
TRIbUTYl PHOSPHATE(BUTYL PHOSPHATE)
[CH3(CH
2)
3O]
3PO FW 266.32 CAS 126-73-8
MP -79°C BP 180-183°C/22mm D 0.979 Merck Index 13,9692 FP 193°C NFPA 2-1-0 Storage Code: GREEN
pUrified tr4285
specifications Assay Min. 99 %
packaging product number Unit size case size TR4285-065 1L 1L Amber Glass TR4285-002 1L 6x1L Amber Glass TR4285-048 4L 4L Amber Glass TR4285-001 4L 4x4L Amber Glass
TRIbUTYlAMINE [CH
3(CH
2)
3]
3N FW 185.36 CAS 102-82-9
MP -70°C BP 216°C D 0.778 Merck Index 13,9691 FP 63°C NFPA 2-2-1 Storage Code: WHITE IMO Tributylamine, 6.1, UN2542, PG II
certified tr1851
specifications Assay Min. 99.0 % Color (APHA) Max. 20 Water Max. 0.5 %
packaging product number Unit size case size TR1851-065 1L 1L Amber Glass TR1851-002 1L 6x1L Amber Glass TR1851-048 4L 4L Amber Glass TR1851-001 4L 4x4L Amber Glass
Tol-Tri
1641,2,4-TRICHlORObENzENE C
6H
3Cl
3 FW 181.45 CAS 120-82-1
MP 16°C BP 214·°C D 1.454 Merck Index 13,9704 FP 110°C NFPA 2-1-0 Storage Code: BLUE Marine Pollutant IMO Trichlorobenzenes, Liquid, 6.1, UN2321, PG III
physical properties Boiling Point (760mm) 214°C Density (g/ml) at 25°C 1.454 Dielectric Constant at 20°C 2.24 Refractive Index (n20°/D) 1.571
certified tr1853
specifications Assay Min. 99.0 % Water Max. 0.02 %
packaging product number Unit size case size TR1853-065 1L 1L Amber Glass TR1853-002 1L 6x1L Amber Glass TR1853-048 4L 4L Amber Glass TR1853-001 4L 4x4L Amber Glass
hplc/spectro ts2141
For Use in Liquid Chromatography and Spectrophotometry Packaged under Nitrogen. Submicron filtered.
specifications Appearance (clear, colorless liquid) Passes Test Assay Min. 99.0 % Residue after Evaporation Max. 5 ppm Water Max. 0.01 % Optical Absorbance at 308 nm Max. 1.00 310 nm Max. 0.50 350 nm Max. 0.05 375 nm Max. 0.01 400 nm Max. 0.01
packaging product number Unit size case size TS2141-065 1L 1L Amber Glass TS2141-002 1L 6x1L Amber Glass TS2141-048 4L 4L Amber Glass TS2141-001 4L 4x4L Amber Glass
TRICHlOROETHYlENE ClCH=CCl
2 FW 131.39 CAS 79-01-6
MP -84.8°C BP 86.7°C D 1.463 Merck Index 13,9713 NFPA 2-1-0 Storage Code: BLUE Cancer Suspect Agent IMO Trichloroethylene, 6.1, UN1710, PG III
physical properties Boiling Point (760mm) 87°C Density (g/ml) at 25°C 1.455 Refractive Index (n20°/D) 1.4767 Viscosity (cps) at 20°C 0.566
acs tr1860
specifications Assay Min. 99.5 % Color (APHA) Max. 10 Free Halogens Passes Test Heavy Metals (as Pb) Max. 1 ppm Residue after Evaporation Max. 0.001 % Titrable Acid Max. 0.0001 meq/g Titrable Base Max. 0.0003 meq/g Water Max. 0.02 %
packaging product number Unit size case size TR1860-065 1L 1L Amber Glass TR1860-002 1L 6x1L Amber Glass TR1860-048 4L 4L Amber Glass TR1860-001 4L 4x4L Amber Glass
spectro ts2151
For Use in Spectrophotometry Packaged under Nitrogen. Submicron filtered.
specifications Assay Min. 99.5 % Residue after Evaporation Max. 0.001 % Water Max. 0.02 % Optical Absorbance at 278 nm Max. 1.00 300 nm Max. 0.10 325 nm Max. 0.08 350 nm Max. 0.06 400 nm Max. 0.06
packaging product number Unit size case size TS2151-065 1L 1L Amber Glass TS2151-002 1L 6x1L Amber Glass TS2151-048 4L 4L Amber Glass TS2151-001 4L 4x4L Amber Glass
TRICHlOROMETHANESee Chloroform
TRICRESYl PHOSPHATE(TRITOLYL PHOSPHATE)
(CH3C
6H
4O)
3PO FW 368.37 CAS 1330-78-5
BP 265°C/10mm D 1.143 Merck Index 13,9832 FP 110°C NFPA 2-1-1 Storage Code: BLUE Marine Pollutant IMO Tricresyl Phosphate, UN2574, PG II
165certificate tr1862
(Mixture of Isomers)
specifications Assay Min. 90.0 %
packaging product number Unit size case size TR1862-065 1L 1L Amber Glass TR1862-002 1L 6x1L Amber Glass TR1862-048 4L 4L Amber Glass TR1862-001 4L 4x4L Amber Glass
TRIETHANOlAMINE(TROLAMINE)
(HOCH2CH
2)
3N FW 149.19 CAS 102-71-6
MP 17.9-21°C BP 190-193°C/5mm D 1.124 Merck Index 13,9739 FP 185°C NFPA 2-1-1 Storage Code: GREEN
certified tr1866
specifications Assay Min. 99 % Iron (Fe) Max. 0.001 % Water Max. 0.2 %
packaging product number Unit size case size TR1866-065 1L 1L Amber Glass TR1866-002 1L 6x1L Amber Glass TR1866-048 4L 4L Amber Glass TR1866-001 4L 4x4L Amber Glass
TRIETHYl ORTHOFORMATE CH
2(OC
2H
5CH
2)
3 FW 148.20 CAS 122-51-0
BP 146°C D 0.891 Merck Index 13,6837 FP 30°C NFPA 2-3-0 Storage Code: RED IMO Ethyl Orthoformate, UN2524, PG III
certified tr4294
specifications Assay Min. 98.0 % Water Max. 0.1 %
packaging product number Unit size case size TR4294-065 1L 1L Amber Glass TR4294-002 1L 6x1L Amber Glass TR4294-048 4L 4L Amber Glass TR4294-001 4L 4x4L Amber Glass
TRIETHYlAMINE (C
2H
5)
3N FW 101.19 CAS 121-44-8
MP -115°C BP 88.8°C D 0.726
Merck Index 13,9740 FP -6°C NFPA 3-3-0 Storage Code: RED IMO Triethylamine, 3 (8), UN1296, PG II
physical properties Boiling Point (760mm) 88.8°C Density (g/ml) at 25°C 0.726 Refractive Index (n20°/D) 1.4
certified tr1867
specifications Assay Min. 99.5 % Color (APHA) Max. 15 Water Max. 0.1 %
packaging product number Unit size case size TR1867-065 1L 1L Amber Glass TR1867-002 1L 6x1L Amber Glass TR1867-048 4L 4L Amber Glass TR1867-001 4L 4x4L Amber Glass
hplc ts2165
Packaged under Nitrogen. Submicron filtered.
specifications Assay Min. 99.5 % Color (APHA) Max. 15 Water Max. 0.2 % Optical Absorbance of 1% v/v aqueous solution at 254 nm Max. 0.10 265 nm Max. 0.04 300 nm Max. 0.02
packaging product number Unit size case size TS2165-065 1L 1L Amber Glass TS2165-002 1L 6x1L Amber Glass
TRIETHYlENE GlYCOl HOCH
2CH
2OCH
2CH
2OCH
2CH
2OH
FW 150.17 CAS 112-27-6 MP -7°C BP 285°C D 1.125 Merck Index 13,9743 FP 165°C NFPA 1-1-0 Storage Code: GREEN
certified tr4291
specifications Assay Min. 99.0 % Water Max. 0.1 %
packaging product number Unit size case size TR4291-065 1L 1L Amber Glass TR4291-002 1L 6x1L Amber Glass TR4291-048 4L 4L Amber Glass TR4291-001 4L 4x4L Amber Glass
Tri-
166TRIETHYlENE GlYCOl MONOMETHYl ETHER CH
3(OCH
2CH
2)
3OH FW 164.20 CAS 112-35-6
BP 122°C/10mm D 1.026 FP >110°C NFPA 0-1-0 Storage Code: GREEN
certified tr4292
specifications Assay Min. 97.0 %
packaging product number Unit size case size TR4292-065 1L 1L Amber Glass TR4292-002 1L 6x1L Amber Glass TR4292-048 4L 4L Amber Glass TR4292-001 4L 4x4L Amber Glass
TRIETHYlENETETRAMINE H
2NCH
2CH
2NHCH
2CH
2NHCH
2CH
2NH
2
FW 146.24 CAS 112-24-3 MP 12°C BP 266-267°C D 0.982 Merck Index 13,9737 FP 143°C NFPA 3-1-0 Storage Code: WHITE IMO Triethylenetetramine, 8, UN2259, PG II
pUrified tr4293
specifications Assay Min. 60.0 %
packaging product number Unit size case size TR4293-065 1L 1L Amber Glass TR4293-002 1L 6x1L Amber Glass TR4293-048 4L 4L Amber Glass TR4293-001 4L 4x4L Amber Glass
TRIFlUOROACETIC ACID CF
3CO
2H FW 114.02 CAS 76-05-1
MP -15.4°C BP 72.4°C D 1.480 Merck Index 13,9754 NFPA 3-0-0 Storage Code: WHITE IMO Trifluoroacetic Acid, 8, UN2699, PG I
certified tr4296
specifications Assay Min. 99.5 % Water Max. 0.1 %
packaging product number Unit size case size TR4296-053 500ml 500ml Amber Glass TR4296-013 500ml 6x500ml Amber Glass
hplc ts4295
For Use in Liquid Chromatography
specifications Appearance (clear, colorless liquid) Passes Test Assay Min. 99.5 % Water Max. 0.1 % Optical Absorbance of a 0.1% Solution at 210 nm Max. 1.00 230 nm Max. 0.15 250 nm Max. 0.01 300 nm Max. 0.005
packaging product number Unit size case size TS4295-069 100ml 100ml Amber Glass TS4295-025 100ml 6x100ml Amber Glass TS4295-053 500ml 500ml Amber Glass TS4295-013 500ml 6x500ml Amber Glass
TRIGlYCOlSee Triethylene Glycol
1,2,4-TRIMETHYlbENzENE(PSEUDOCUMENE)
C6H
3(CH
3)
3 FW 120.20 CAS 95-63-6
MP -44°C BP 168°C D 0.889 Merck Index 13,8006 FP 48°C NFPA 0-2-0 Storage Code: RED IMO Flammable Liquid N.O.S. (1,2,4-Trimethylbenzene), 3, UN1993, PG III
certified tr1868
specifications Assay Min. 98.0 % Water Max. 0.1 %
packaging product number Unit size case size TR1868-065 1L 1L Amber Glass TR1868-002 1L 6x1L Amber Glass TR1868-048 4L 4L Amber Glass TR1868-001 4L 4x4L Amber Glass
1,3,5-TRIMETHYlbENzENE(MESITYLENE)
C6H
3(CH
3)
3 FW 120.20 CAS 108-67-8
MP -45°C BP 162-164°C D 0.864 Merck Index 13,5934 FP 44°C NFPA 0-2-0 Storage Code: RED Marine Pollutant IMO 1,3,5-Trimethylbenzene, 3, UN2325, PG III
167certified tr1869
specifications Assay Min. 99.0 % Water Max. 0.1 %
packaging product number Unit size case size TR1869-065 1L 1L Amber Glass TR1869-002 1L 6x1L Amber Glass TR1869-048 4L 4L Amber Glass TR1869-001 4L 4x4L Amber Glass
TRIMETHYlCARbINOlSee tert-Butyl Alcohol
2,2,4-TRIMETHYlPENTANE(ISOOCTANE)
(CH3)
2CHCH
2C(CH
3)
3 FW 114.23 CAS 540-84-1
MP -107°C BP 98-99°C D 0.692 Merck Index 13,5212 FP -7°C NFPA 0-3-0 Storage Code: RED IMO Octanes, 3, UN1262, PG II
physical properties Boiling Range 98-99°C Density (g/ml) at 25°C 0.692 Dielectric Constant at 25°C 1.94 Elutropic Value (Silica) 0.01 Refractive Index (n20°/D) 1.391 Viscosity (cps) at 20°C 0.5
absolv ta2171
For Use in Liquid Chromatography, Spectrophotometry, and for Organic Residue Analysis Packaged under Nitrogen.
specifications Assay Min. 99.8 % Color (APHA) Max. 10 GC-ECD Responsive Residue (as Heptachlor Epoxide) Max. 10 ppt Fluorescence Background (as Quinine Sulfate) Max. 1 ppb Residue after Evaporation Max. 1 ppm Water Max. 0.02 % Optical Absorbance at 205 nm Max. 1.00 220 nm Max. 0.20 230 nm Max. 0.10 254 nm Max. 0.01 280 nm Max. 0.01
packaging product number Unit size case size TA2171-065 1L 1L Amber Glass TA2171-002 1L 6x1L Amber Glass TA2171-048 4L 4L Amber Glass TA2171-001 4L 4x4L Amber Glass
acs tr1870
Meets reagent specifications for testing USP/NF monographs.
specifications Assay Min. 99.0 % Color (APHA) Max. 10 Residue after Evaporation Max. 0.001 % Sulfur Compounds (as S) Max. 0.005 % Water-soluble Titrable Acid Max. 0.0003 meq/g
packaging product number Unit size case size TR1870-065 1L 1L Amber Glass TR1870-002 1L 6x1L Amber Glass TR1870-008 204L 204L Metal Drum TR1870-007 20L 20L Metal Pail TR1870-073 4L 4L PVC Coated Amber Glass TR1870-048 4L 4L Amber Glass TR1870-006 4L 4x4L PVC Coated Amber Glass TR1870-001 4L 4x4L Amber Glass
acs plUs tr2596
Meets reagent specifications for testing USP/NF monographs.
specifications Assay Min. 99.0 % Residue after Evaporation Max. 0.001 % Color (APHA) Max. 10 Sulfur Compounds (as S) Max. 0.005 % Water-Soluble Titrable Acid Max. 0.0003 meq/g Tracemetals Aluminum (Al) Max. 0.5 ppm Barium (Ba) Max. 0.1 ppm Boron (B) Max. 0.02 ppm Cadmium (Cd) Max. 0.05 ppm Calcium (Ca) Max. 0.5 ppm Chromium (Cr) Max. 0.02 ppm Cobalt (Co) Max. 0.02 ppm Copper (Cu) Max. 0.02 ppm Iron (Fe) Max. 0.1 ppm Lead (Pb) Max. 0.1 ppm Magnesium (Mg) Max. 0.1 ppm Manganese (Mn) Max. 0.02 ppm Nickel (Ni) Max. 0.02 ppm Tin (Sn) Max. 0.1 ppm Zinc (Zn) Max. 0.1 ppm
packaging product number Unit size case size TR2596-065 1L 1L Amber Glass TR2596-002 1L 6x1L Amber Glass TR2596-048 4L 4L Amber Glass TR2596-001 4L 4x4L Amber Glass
Tri-
1682,2,4-TRIMETHYlPENTANE (CONTINUED)
gc tg2173
For Organic Residue Analysis
specifications Assay Min. 99.5 % Residue after Evaporation Max. 3 ppm Water Max. 0.02 % Color (APHA) Max. 10 GC-ECD Halogenated Residue (as Heptachlor Epoxide) Max. 10 ppt GC-FID Responsive Residue (as 2-Octanol) Max. 5 ppb
packaging product number Unit size case size TG2173-065 1L 1L Amber Glass TG2173-002 1L 6x1L Amber Glass TG2173-048 4L 4L Amber Glass TG2173-001 4L 4x4L Amber Glass
hplc/acs ts3390
For Use in Liquid Chromatography and Spectrophotometry Packaged under Nitrogen. Submicron filtered.
specifications Assay Min. 99.7 % Color (APHA) Max. 10 Residue after Evaporation Max. 5 ppm Sulfur Compounds (as S) Max. 0.005 % Water-soluble Titrable Acid Max. 0.0003 meq/g Optical Absorbance at 210 nm 1.00 220 nm 0.20 230 nm 0.10 250 nm 0.02 280 nm 0.01
packaging product number Unit size case size TS3390-008 204L 204L Metal Drum
hplc/spectro ts2172
For Use in Liquid Chromatography and Spectrophotometry Packaged under Nitrogen. Submicron filtered.. Also meets ACS specifications.
specifications Assay Min. 99.7 % Color (APHA) Max. 10 Residue after Evaporation Max. 3 ppm Sulfur Compounds (as S) Max. 0.005 % Water Max. 0.02 % Water-soluble Titrable Acid Max. 0.0003 meq/g Optical Absorbance at 205 nm Max. 1.00 220 nm Max. 0.20
230 nm Max. 0.10 254 nm Max. 0.01 280 nm Max. 0.01
packaging product number Unit size case size TS2172-065 1L 1L Amber Glass TS2172-002 1L 6x1L Amber Glass TS2172-073 4L 4L PVC Coated Amber Glass TS2172-048 4L 4L Amber Glass TS2172-006 4L 4x4L PVC Coated Amber Glass TS2172-001 4L 4x4L Amber Glass
TRITOlYl PHOSPHATESee Tricesyl Phosphate
TRITON x-100[POLYOxYETHYLENE(10) ISOOCTYLPHENYL ETHER]
C14
H22
O(C2H
4O)
n CAS 9002-93-1
D 1.070 Merck Index 13,6793 FP >110°C NFPA 2-1-0 Storage Code: BLUE
certified tr1875
specifications Color (APHA) Max. 100 pH of a 5% Solution at 25ºC 6 - 8
packaging product number Unit size case size TR1875-065 1L 1L Amber Glass TR1875-002 1L 6x1L Amber Glass TR1875-048 4L 4L Amber Glass TR1875-001 4L 4x4L Amber Glass
TRITON x-405[POLYOxYETHYLENE(40) ISOOCTYLPHENYL ETHER]
CAS 9002-93-1 D 1.084 Merck Index 13,6858 NFPA 2-1-0 Storage Code: BLUE
certified tr1876
specifications Appearance at 50ºC (Clear, free from visible foreign matter) Passes Test Color (APHA) Max. 250 Solid Content (by weight) 69 - 71 %
packaging product number Unit size case size TR1876-065 1L 1L Amber Glass TR1876-002 1L 6x1L Amber Glass TR1876-048 4L 4L Amber Glass TR1876-001 4L 4x4L Amber Glass
169TROlAMINESee Triethanolamine
TWEEN® 20 [POLYOxYETHYLENE (20) SORBITAN MONOLAURATE]
CAS 9005-64-5 D 1.095 FP>110°C NFPA 1-1-0 Storage Code: GREEN
certified tr1880
specifications Acid Value, mg KOH/g Max. 2.2 Hydroxyl Number, mg KOH/g 96 - 108 Saponification Number, mg KOH/g 40 - 50 Water Max. 3.0 %
packaging product number Unit size case size TR1880-065 1L 1L Amber Glass TR1880-002 1L 6x1L Amber Glass TR1880-048 4L 4L Amber Glass TR1880-001 4L 4x4L Amber Glass
TWEEN® 40 [POLYOxYETHYLENE (20) SORBITAN MONOPALMITATE]
CAS 9005-66-7 D 1.083 FP >110°C NFPA 1-1-0 Storage Code: GREEN
certified tr1881
specifications Acid Value, mg KOH/g Max. 2.2 Hydroxyl Number, mg KOH/g 89 - 105 Saponification Number, mg KOH/g 41 - 52 Water Max. 3.0 %
packaging product number Unit size case size TR1881-065 1L 1L Amber Glass TR1881-002 1L 6x1L Amber Glass TR1881-048 4L 4L Amber Glass TR1881-001 4L 4x4L Amber Glass
TWEEN® 60[POLYOxYETHYLENE (20) SORBITAN MONOSTEARATE]
CAS 9005-67-8 D 1.044 FP >110°C NFPA 1-1-0 Storage Code: GREEN
certified tr1882
specifications Acid Value, mg KOH/g Max. 2.2 Hydroxyl Number, mg KOH/g 81 - 96 Saponification Number, mg KOH/g 45 - 55 Water Max. 3.0 %
packaging product number Unit size case size TR1882-065 1L 1L Amber Glass TR1882-002 1L 6x1L Amber Glass TR1882-048 4L 4L Amber Glass TR1882-001 4L 4x4L Amber Glass
TWEEN® 80[POLYOxYETHYLENE (20) SORBITAN MONOOLEATE]
CAS 9005-65-6 D 1.064 FP >110°C NFPA 1-1-0 Storage Code: GREEN
certified tr1883
specifications Acid Value, mg KOH/g Max. 2.2 Hydroxyl Number, mg KOH/g 65 - 80 Saponification Number, mg KOH/g 45 - 55 Water Max. 3.0 %
packaging product number Unit size case size TR1883-065 1L 1L Amber Glass TR1883-002 1L 6x1L Amber Glass TR1883-048 4L 4L Amber Glass TR1883-001 4L 4x4L Amber Glass
TWEEN® 85[POLYOxYETHYLENE (20) SORBITAN TRIOLEATE]
CAS 9005-70-3 D 1.028 FP >110°C NFPA 1-1-0 Storage Code: GREEN
certified tr1884
specifications Acid Value, mg KOH/g Max. 2.0 Hydroxyl Number, mg KOH/g 39 - 52 Saponification Number, mg KOH/g 80 - 95 Water (Karl Fisher) 4.8 - 5.2 %
packaging product number Unit size case size TR1884-065 1L 1L Amber Glass TR1884-002 1L 6x1L Amber Glass TR1884-048 4L 4L Amber Glass TR1884-001 4L 4x4L Amber Glass
Tri-Twe
170WATER H
20 FW 18.02 CAS 7732-18-5
MP 0°C BP 100°C D 1.000 Merck Index 13,10098 NFPA 0-0-0 Storage Code: GREEN IMO Water (Not for Human Consumption)
physical properties Boiling Point (760mm) 100°C Density (g/ml) at 25°C 1 Dielectric Constant at 20°C 80.1 Refractive Index (n20°/D) 1.333 Viscosity (cps) at 20°C 1
hplc ws2211
For Use in High Performance Liquid Chromatography Packaged under Nitrogen. Submicron filtered.
specifications Fluorescence at 450 nm (as Quinine) Max. 0.1 ppb LC Gradient Elution Suitability Passes Test Residue after Evaporation Max. 1 ppm Optical Absorbance at 190 nm Max. 0.01 200 nm Max. 0.01 210 nm Max. 0.01 250 nm Max. 0.005 400 nm Max. 0.005
packaging product number Unit size case size WS2211-065 1L 1L Amber Glass WS2211-002 1L 6x1L Amber Glass WS2211-048 4L 4L Amber Glass WS2211-001 4L 4x4L Amber Glass
lc/Ms wl2212
For LC/MS applications
specifications Residue after Evaporation Max. 1 ppm LC Gradient Suitability at 254 and 205nm Passes Test LCMS Gradient Suitability Passes Test LCMS at Positive Mode as Reserpine Max. 50 ppb LCMS at Negative Mode as Aldicarb Max. 50 ppb Protease Not Detected Total Halogens (as chloride) Not Detected Optical Absorbance at 210 nm Max. 0.01 220 nm Max. 0.01 230 nm Max. 0.01 240 nm Max. 0.01 254 nm Max. 0.005 260 nm Max. 0.005 280 nm Max. 0.005 Tracemetals Aluminum (Al) Max. 10 ppb Barium (Ba) Max. 10 ppb Cadmium (Cd) Max. 10 ppb
Calcium (Ca) Max. 20 ppb Chromium (Cr) Max. 10 ppb Cobalt (Co) Max. 10 ppb Copper (Cu) Max. 10 ppb Iron (Fe) Max. 10 ppb Lead (Pb) Max. 10 ppb Magnesium (Mg) Max. 10 ppb Manganese (Mn) Max. 10 ppb Nickel (Ni) Max. 10 ppb Potassium (K) Max. 10 ppb Silver (Ag) Max. 10 ppb Sodium (Na) Max. 20 ppb Tin (Sn) Max. 10 ppb Zinc (Zn) Max. 10 ppb
packaging product number Unit size case size WL2212-065 1L 1L Amber Glass WL2212-002 1L 6x1L Amber Glass WL2212-048 4L 4L Amber Glass WL2212-001 4L 4x4L Amber Glass
m-xYlENE 99% C
6H
4(CH
3)
2 FW 106.17 CAS 108-38-37
BP 138-139°C D 0.868 Merck Index 13,10136 FP 25°C NFPA 2-3-0 Storage Code: RED IMO xylenes, 3, UN1307, PG III
certified Xr2242
Meets reagent specifications for testing USP/NF monographs.
specifications Assay Min. 99.0 % Color (APHA) Max. 20
packaging product number Unit size case size xR2242-065 1L 1L Amber Glass xR2242-002 1L 6x1L Amber Glass xR2242-048 4L 4L Amber Glass xR2242-001 4L 4x4L Amber Glass
o-xYlENE C
6H
4(CH
3)
2 FW 106.17 CAS 95-47-6
MP -25 – -93°C BP 143-145°C D 0.870 Merck Index 13,10136 FP 32°C NFPA 2-3-0 Storage Code: RED IMO xylenes, 3, UN1307, PG III
physical properties Boiling Range (760mm) 143-145°C Density (g/ml) at 25°C 0.87 Dielectric Constant at 20°C 2.57 Refractive Index (n20°/D) 1.505 Viscosity (cps) at 20°C 0.81 0.81
171certified Xr2243
specifications Assay Min. 97.0 % Color (APHA) Max. 20
packaging product number Unit size case size xR2243-065 1L 1L Amber Glass xR2243-002 1L 6x1L Amber Glass xR2243-048 4L 4L Amber Glass xR2243-001 4L 4x4L Amber Glass
hplc/spectro Xs2311
For Use in Liquid Chromatography and Spectrophotometry Packaged under Nitrogen. Submicron filtered.
specifications Assay Min. 98.0 % Assay (as xylenes) Min. 99.0 % Color (APHA) Max. 10 Residue after Evaporation Max. 3 ppm Water Max. 0.03 % Optical Absorbance at 288 nm Max. 1.00 300 nm Max. 0.20 325 nm Max. 0.05 350 nm Max. 0.01 400 nm Max. 0.01
packaging product number Unit size case size xS2311-065 1L 1L Amber Glass xS2311-002 1L 6x1L Amber Glass xS2311-048 4L 4L Amber Glass xS2311-001 4L 4x4L Amber Glass
p-xYlENE 99% C
6H
4(CH
3)
2 FW 106.17 CAS 106-42-3
MP 12 - 13°C BP 138°C D 0.866 Merck Index 13,10136 FP 25°C NFPA 2-3-0 Storage Code: RED IMO xylenes, 3, UN1307, PG II
physical properties Boiling Point (760mm) 138°C Density (g/ml) at 25°C 0.866 Refractive Index (n20°/D) 1.495
certified Xr2248
specifications Assay Min. 99.0 % Color (APHA) Max. 20
packaging product number Unit size case size xR2248-065 1L 1L Amber Glass xR2248-002 1L 6x1L Amber Glass
xR2248-048 4L 4L Amber Glass xR2248-001 4L 4x4L Amber Glass
hplc/spectro Xs2247
For Use in Liquid Chromatography and Spectrophotometry Packaged under Nitrogen. Submicron filtered.
specifications Assay Min. 99.0 % Residue after Evaporation Max. 5 ppm Water Max. 0.03 % Optical Absorbance at 294 nm Max. 1.00 320 nm Max. 0.10 350 nm Max. 0.05 380 nm Max. 0.01 400 nm Max. 0.01
packaging product number Unit size case size xS2247-065 1L 1L Amber Glass xS2247-002 1L 6x1L Amber Glass xS2247-048 4L 4L Amber Glass xS2247-001 4L 4x4L Amber Glass
xYlENES C
6H
4(CH
3)
2 FW 106.17 CAS 1330-20-7
BP 137-144°C D 0.860 Merck Index 13,10136 FP 29°C NFPA 2-3-0 Storage Code: RED IMO xylenes, 3, UN1307, PG III
acs Xr2250
Meets reagent specifications for testing USP/NF monographs.
specifications Assay (Isomers & Ethylbenzene) Min. 98.5 % Color (APHA) Max. 10 Residue after Evaporation Max. 0.002 % Substances Darkened by Sulfuric Acid Passes Test Sulfur Compounds (as S) Max. 0.003 % Water Max. 0.05 %
packaging product number Unit size case size xR2250-065 1L 1L Amber Glass xR2250-002 1L 6x1L Amber Glass xR2250-008 204L 204L Metal Drum xR2250-007 20L 20L Metal Pail xR2250-048 4L 4L Amber Glass xR2250-001 4L 4x4L Amber Glass
xyl-
172
xYlENES (CONTINUED)
acs plUs Xr2599
Meets reagent specifications for testing USP/NF monographs.
specifications Assay (Isomers & Ethylbenzene) Min. 98.5 % Color (APHA) Max. 10 Residue after Evaporation Max. 0.002 % Substances Darkened by Sulfuric Acid Passes Test Sulfur Compounds (as S) Max. 0.003 % Water Max. 0.05 % Tracemetals Aluminum (Al) Max. 0.5 ppm Barium (Ba) Max. 0.1 ppm Boron (B) Max. 0.02 ppm Cadmium (Cd) Max. 0.05 ppm Calcium (Ca) Max. 0.5 ppm Chromium (Cr) Max. 0.02 ppm Cobalt (Co) Max. 0.02 ppm Copper (Cu) Max. 0.02 ppm Iron (Fe) Max. 0.1 ppm Lead (Pb) Max. 0.1 ppm Magnesium (Mg) Max. 0.1 ppm Manganese (Mn) Max. 0.02 ppm Nickel (Ni) Max. 0.02 ppm Tin (Sn) Max. 0.1 ppm Zinc (Zn) Max. 0.1 ppm
packaging product number Unit size case size xR2599-065 1L 1L Amber Glass xR2599-002 1L 6x1L Amber Glass xR2599-048 4L 4L Amber Glass xR2599-001 4L 4x4L Amber Glass
histological Xr2251
For use in Tissue Sampling and Processing
specifications Assay (Isomers & Ethylbenzene) Min. 98.5 % Boiling Range Passes Test Color (APHA) Max. 10 Residue after Evaporation Max. 0.002 % Sulfur Compounds (as S) Max. 0.003 % Water Max. 0.05 %
packaging product number Unit size case size xR2251-008 204L 204L Metal Drum xR2251-007 20L 20L Metal Pail xR2251-066 4L 4L Poly Bottle xR2251-012 4L 4x4L Poly Bottle
xYlIDINESee N,N-Dimethylaniline
173TERMS & CONDITIONSestablishing an accoUnt or placing an orderYou can place your order with any of the au-thorized distributors of TEDIA COMPANY, INC.worldwide. You can get the name of a distributor in your area by contacting Tedia (see back cover).pUrchase order reQUireMentsAt the current time, TEDIA COMPANY, INC. ac-cepts faxed or emailed purchase orders (PO)only. The following information is required for a PO to be accepted. A Tedia representative will contact you by phone or email to confirm any missing information and request a revised PO. Tedia will be unable to accept and process incomplete PO’s. Note that a minimum of 48 hours’ notice is required to revise open PO’s.• Purchase Order Number and Company Name• Authorized Purchasing Agent• Order Date and Due Date• Product Number, Description and Package Size• Quantity in Units and Cost Per Unit• Payment Terms (net 30 days unless agreed upon in advance); may reference credit card number on file with Tedia• Billing Address and Shipping Address• Shipping Method and Preferred Shipperprices/specificationsPrices published in pricebooks and specifica-tions listed in catalogs are current at the time of publication, but both are subject to change without notice. For current pricing, contact adistributor of TEDIA COMPANY, INC. in your area or TEDIA COMPANY, INC. Note that case prices usually offer savings of 30% compared to single-bottle quantities.inQUiries of certificates of analysis (coa) and Material safety data sheets (Msds)An actual lot analysis is printed on the label of most products. TEDIA COMPANY, INC.maintains a complete and up-to-date MSDS on each of our products. You can call or fax arequest for a signed COA or MSDS for any of our products. You can also access COA or MSDS by visiting www.tedia.com.sales policyTEDIA COMPANY, INC. products are sold world-wide through distributors and are for laboratory or manufacturing use only. They are not suit-able for food, drug, or household use. Should you have a need for bulk quantities or for spe-cial formulations, call a distributor of TEDIA COMPANY, INC. in your area or TEDIA COMPANY, INC. Customer Service.transportationAll prices are FOB (Fairfield, OH, USA) unless otherwise agreed upon prior to shipping. Lost or damaged freight is the responsibility of the carrier. All shipments comply with DOT, IMO, and other applicable regulations. TEDIA COM-PANY, INC. products are shipped by common carrier, express service, parcel post, ocean, or
rail freight. Shipping instructions should ac-company your order. In the absence of shipping instructions, Tedia will select the best shipment method, based on the nature of the material, destination, and package size and weight.safe handling and Use of cheMicalsBuyers and users of the chemicals sold by TEDIA COMPANY, INC. are solely responsible fortheir safe use. All chemicals should be handled by qualified, trained professionals who are fa-miliar with their potential hazards. Users should refer to the Material Safety Data Sheets (MSDS) and product labels for applicable warnings. Al-though suitable precautionary statements are provided with all hazardous or suspected haz-ardous chemicals, the absence of warning does not mean that the product has no risks associ-ated with exposure. There is little or no health risk information available on many substances, and the user is responsible for following stan-dard laboratory safety procedures and avoiding any contact with the chemicals used.
While the information and data provided by TEDIA COMPANY, INC. are correct and reliable to the best of TEDIA COMPANY, INC.’s knowl-edge and belief, they are not guaranteed to be so, nor does TEDIA COMPANY, INC. repre-sent that reliance upon such information and data will ensure compliance with any appli-cable laws and regulations. No responsibility is assumed by TEDIA COMPANY, INC. for the infor-mation and data, except as is stated in TEDIACOMPANY, INC.’s warranty statement.toXic sUbstance control actThe Toxic Substance Control Act (TSCA) requires any person who intends to manufacture or import a new chemical substance for a commercial purpose to submit a pre-manufacturing notice (PMN) at least 90 days before manufacture and/or importation. TSCA Section 5(h)(3) exempts from the pre-manufacture notification requirements those chemical substances that are used solely for research and development purposes.
Some TEDIA COMPANY, INC. products are not listed on the TSCA inventory. Such products are intended solely for use in analysis, experi-mentation, and/or research and development and therefore qualify for exemption from the new chemical notifications requirements. Buy-ers and users are responsible for assuring that products are used for these or other exempt purposes. Nonexempt uses may trigger pre-manufacture notification requirements.
Contact TEDIA COMPANY, INC. if you have any questions or anticipate that a pre manu-facturing notice is required for any product purchased from TEDIA COMPANY, INC.the tedia coMpany, inc. warrantyTEDIA COMPANY, INC.’s products are warranted to conform to the specifications appearing inthe current catalog.
TEDIA COMPANY, INC. ExPRESSLY DISCLAIMS ALL OTHER WARRANTIES, ExPRESS OR IMPLIED,
INCLUDING THE IMPLIED WARRANTY OFMERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
TEDIA COMPANY, INC.’s sole responsibility and the purchaser’s exclusive remedy for any claim arising out the purchase of any TEDIA COMPA-NY, INC. product is the replacement or credit as described below where applicable. In no event: 1) shall the cost of the exclusive remedy exceed the purchase price; 2) shall TEDIA COMPANY, INC. be liable for any special indirect, incidental, consequential, or exemplary damages, irrespec-tive of whether attributable to contract, warranty, negligence, strict liability, or otherwise.retUrned goods policyNo returns are allowed without a return autho-rization number. Obtain this number from your distributor or TEDIA COMPANY, INC. Returns made without having this number on shipping labels will be returned collect to the purchaser. Do not write on cartons.
Returns must be made within 60 days of the issuance of the return authorization number. Return shipments of hazardous materials must be packed, marked, labeled and shipped in accordance with regulations governing trans-portation of hazardous materials.
Returns qualifying for full credit:• Products not supplied in accordance with your orders.• Products that are defective at the time you receive them.Returns subject to a 25% restocking charge:• Products ordered in error and not identified below as unacceptable for credit.Returns not acceptable for credit:• Discontinued products.• Products that have been personalized or customized.•Products not purchased from TEDIA COMPANY, INC.• Products without useful shelf lives.• Products that have been opened.If a problem develops concerning a newly pur-chased TEDIA COMPANY, INC. product, pleasecall, fax, or write TEDIA COMPANY, INC. Custom-er Service within 120 days of its receipt.TEDIA COMPANY, INC. will act promptly to re-solve the situation.As soon as you receive a TEDIA COMPANY, INC. shipment, carefully unpack it and inspect forany shortages or damages. If such exist:• Do not accept the shipment until the carrier’s driver makes a damage notation on your deliv-ery receipt or freight bill.• Immediately request that the carrier’s inspec-tor make an inspection. If the inspector doesnot comply with your request, prepare an af-fidavit that you notified the carrier’s inspector on a certain date and the inspector failed to make an inspection.• Keep all container and packing material for the inspection.
If you later discover concealed damage, you must request an inspection within 10 days of delivery.
174
Acetic Acid Glacial 3-2-2 WHITE Acetic Anhydride 2-2-1 WHITE Acetone 1-3-0 RED Acetonitrile 1-3-0 RED (Methyl Cyanide)Acetophenone 1-2-0 RED Acrylic Acid 3-2-2 WHITE Activator Solution (0.25M DCI in Acetonitrile) 1-3-0 RED Activator Solution (0.25M ETT in Acetonitrile) 1-3-0 RED Activator Solution (0.2M BMT in Acetonitrile) 1-3-0 RED Activator Solution (0.3M BMT in Acetonitrile) 1-3-0 RED Activator Solution (0.5M ETT in Acetonitrile) 1-3-0 RED Alcohol, Anhydrous, Reagent 1-3-0 RED (Specially Denatured Alcohol)Alcohol, Reagent 1-3-0 RED (Specially Denatured Alcohol)Ammonium Acetate 2-0-0 GREEN Ammonium Carbonate 0-0-0 GREEN Ammonium Hydroxide 3-0-0 WHITE Ammonium Phosphate Monobasic 0-0-0 GREEN (Ammonium Dihydrogen Phosphate)Amyl Acetate 1-3-0 RED Amyl Alcohol, n- 1-3-0 RED (1-Pentanol)Amyl Alcohol, tert- 1-3-0 RED (2-Methyl-2-butanol)Aniline 3-2-0 BLUE Benzyl Alcohol 2-1-0 BLUE Bromochloromethane 2-0-0 BLUE Butanediol, 1,4- 1-1-0 GREEN Butanesulfonic Acid, Sodium Salt, 1- 1-1-0 GREEN (Sodium 1-Butanesulfonate)Butyl Acetate, n- 1-3-0 RED Butyl Alcohol, n- 1-3-0 RED (1-Butanol)Butyl Alcohol, sec- 1-3-0 RED (2-Butanol)Butyl Alcohol, tert- 1-3-0 RED (2-Methyl-2-propanol)Butyl Ether 2-3-1 RED Dibutyl Ether)Butylamine, n- 3-3-0 RED Butyraldehyde 3-3-0 RED Cap A (1-Methylimidazole in Acetonitrile, 1:9) 3-3-1 RED Cap A (1-Methylimidazole in Acetonitrile, 2:8) 3-3-1 RED Cap A (Acetic Anhydride in THF, 1:9) 2-3-1 RED Cap A (Acetic Anhydride, 2,6-Lutidine in THF, 1:1:8) 2-3-1 RED Cap A (Acetic Anhydride, Pyridine in THF, 1:1:8) 2-3-1 RED Cap B (1-Methylimidazole in THF, 1:9) 2-3-1 RED Cap B (1-Methylimidazole in THF, 16:84) 2-3-1 RED Cap B (1-Methylimidazole, Pyridine in THF, 1:1:8) 3-3-1 RED Cap B (Acetic Anhydride in Acetonitrile, 1:9) 2-3-1 RED Cap B 1 (Acetic Anhydride in Acetonitrile, 4:6) 2-3-1 RED Cap B 2 (2,6-Lutidine in Acetonitrile, 6:4) 2-3-0 RED Carbon Disulfide 3-3-0 RED Celite 545 2-0-0 GREEN Chlorobenzene 2-3-0 RED (Monochlorobenzene)Chlorobutane, 1- 2-3-0 RED (n-Butyl Chloride)Chloroethanol, 2- 4-2-0 BLUE (Ethylene Chlorohydrin)Chloroform w/Amylene 4-2-0 BLUE Chloroform w/Ethanol 4-2-0 BLUE Cyclohexane 1-3-0 RED Cyclohexanol 1-2-0 RED Cyclohexanone 1-2-0 RED Cyclohexene 1-3-0 RED Cyclohexylamine 3-3-0 RED Cyclopentane 75% 1-3-0 RED Cyclopentanone 2-3-0 RED Deblock Solution, 1% TCA in DCM (w/v) 3-1-1 BLUE
storage cheMical nfpa code synonyMs
Chemsafe
175
Deblock Solution, 2% TCA in DCM (w/v) 3-1-1 BLUE Deblock Solution, 3% DCA in DCM (v/v) 3-1-1 BLUE Deblock Solution, 3% DCA in Toluene (v/v) 3-3-1 RED Deblock Solution, 3% TCA in DCM (w/v) 3-1-1 BLUE Deblock Solution, 5% DCA in Toluene (v/v) 3-3-1 RED Decahydronaphthalene 2-2-0 RED (Decaline)Decane, n- 0-2-0 RED Decanesulfonic Acid, Sodium Salt, 1- 2-1-0 GREEN (Sodium 1-Decanesulfonate)Decanoic Acid 2-1-0 BLUE (Capric Acid)Decyl Alcohol 0-2-0 GREEN (1-Decanol)Diacetone Alcohol 1-2-0 RED (4-Hydroxy-4-methyl-2-pentanone)Dibromoethane, 1,2- 3-0-0 BLUE (Ethylene Dibromide)Dibutyl Phthalate 2-1-0 GREEN (Butyl Phthalate)Dibutylamine 3-2-0 WHITE Dichloroacetic Acid 3-1-0 WHITE Dichlorobenzene, o- 2-2-0 BLUE Dichloroethane, 1,2- 2-3-0 RED (Ethylene Dichloride)Dichloromethane 2-1-0 BLUE (Methylene Chloride)Dicyclopentadiene 1-3-1 RED (Cyclopentadiene Dimer)Diethanolamine 1-1-0 GREEN Diethyl Ketone 1-3-0 RED (3-Pentanone)Diethyl Phthalate 0-1-0 GREEN (Ethyl Phthalate)Diethyl Sulfate 3-1-1 BLUE (Ethyl Sulfate)Diethylamine 3-3-0 RED Diethylene Glycol 1-1-0 GREEN Diethylene Glycol Dibutyl Ether 1-1-0 GREEN Diethylene Glycol Dimethyl Ether 1-2-1 RED [2-Methoxyethyl Ether; Diglyme; Bis(2-methoxyethyl) Ether]Diethylene Glycol Monobutyl Ether 1-1-0 GREEN [2-(2-Butoxyethoxy)ethanol; Butyl Carbitol]Diethylene Glycol Monobutyl Ether Acetate 1-1-0 GREEN [2-(2-Butoxyethoxy)ethyl Acetate]Diethylene Glycol Monoethyl Ether 1-1-0 GREEN [2-(2-Ethoxyethoxy)ethanol; Carbitol]Diethylene Glycol Monoethyl Ether Acetate 1-1-0 GREEN [2-(2-Ethoxyethoxy)ethyl Acetate; Carbitol Acetate]Diethylene Glycol Monohexyl Ether 1-1-0 GREEN [2-(2-Hexyloxyethoxy)ethanol]Diethylene Glycol Monomethyl Ether 2-2-0 RED [2-(2-Methoxyethoxy)ethanol]Diisopropylamine 3-3-0 RED Dimethyl Phthalate 0-1-0 GREEN Dimethyl Sulfoxide 1-1-0 GREEN (Methyl Sulfoxide)Dimethyl-4-heptanone, 2,6- 1-2-0 RED (Diisobutyl Ketone)Dimethylacetamide, N,N- 2-2-0 RED Dimethylaniline, N,N- BLUE (xylidine)Dimethylformamide, N,N- 1-2-0 RED Dioxane, 1,4- 2-3-1 RED Dipropylene Glycol 1-1-0 GREEN Dipropylene Glycol Monomethyl Ether 0-2-0 RED Dodecane 99% 0-2-0 RED Dodecanesulfonic Acid, Sodium Salt, 1- 1-1-0 GREEN (Sodium 1-Dodecanesulfonate)Dodecanol, 1- 0-1-0 GREEN Epichlorohydrin 3-3-2 RED (1-Chloro-2,3-epoxypropane)Ethanolamine 3-2-0 WHITE (2-Aminoethanol)Ethyl Acetate 1-3-0 RED Ethyl Acetoacetate 2-2-0 RED (Acetoacetic Ester)Ethyl Alcohol, 200 Proof, Reagent 1-3-0 RED (Ethanol, Undenatured)Ethyl Benzoate 1-1-0 GREEN Ethyl Ether Anhydrous 1-4-1 RED (Diethyl Ether; Ether)Ethyl Ether w/Ethanol 1-4-1 RED (Diethyl Ether; Ether)Ethyl Lactate 2-2-0 RED Ethylbenzene 2-3-0 RED Ethylene Glycol 1-1-0 GREEN (1,2-Ethanediol)
storage cheMical nfpa code synonyMs
Chemsafe (continued)
176
Ethylene Glycol Dimethyl Ether 2-2-0 RED (1,2-Dimethoxyethane, Monoglyme)Ethylene Glycol Monobutyl Ether 2-2-0 RED (Butyl Cellosolve; 2-Butoxyethanol)Ethylene Glycol Monobutyl Ether Acetate 1-2-0 RED (Butyl Cellosolve Acetate; 2-Butoxyethyl Acetate)Ethylene Glycol Monoethyl Ether 2-2-0 RED (Cellosolve; 2-Ethoxyethanol)Ethylene Glycol Monoethyl Ether Acetate 1-2-0 RED (Cellosolve Acetate; 2-Ethoxyethyl Acetate)Ethylene Glycol Monomethyl Ether 2-2-0 RED (2-Methoxyethanol)Ethylene Glycol Monomethyl Ether Acetate 2-2-0 RED (2-Methoxyethyl Acetate)Ethylene Glycol Monophenyl Ether 99% 2-1-1 GREEN (2-Phenoxyethanol)Ethylenediamine Anhydrous 3-2-0 RED (1,2-Diaminoethane, 1,2-Ethanediamine)Florisil® (60-100 Mesh) 1-0-0 GREEN Formaldehyde 37% 3-2-0 RED Formaline Neutral Buffered 10% w/v 3-2-0 BLUE Formamide 2-1-0 GREEN Formic Acid 88% 3-2-0 WHITE Formic Acid 96% 3-2-0 WHITE Furan 1-4-1 RED Glutaraldehyde 25% Aqueous Solution 3-0-0 WHITE (Glutaric Dialdehyde)Glutaraldehyde 50% Aqueous Solution 3-0-0 WHITE Glycerol 1-1-0 GREEN (Glycerin)Heptane 96%, n- 1-3-0 RED Heptane 99%, n- 1-3-0 RED Heptanesulfonic Acid, Sodium Salt, 1- 1-1-0 GREEN (Sodium 1-Heptanesulfonate)Hexadecane 0-1-0 GREEN Hexane 95%, n- 1-3-0 RED Hexane 99%, n- 1-3-0 RED Hexanes 1-3-0 RED Hexanesulfonic Acid, Sodium Salt, 1- 1-1-0 GREEN Hexyl Alcohol 1-2-0 RED (1-Hexanol)Hydrochloric Acid 3-0-2 WHITE Hydrochloric Acid 37% 3-0-2 WHITE Hydrofluoric Acid 4-0-1 WHITE Hydrogen Peroxide 3% 0-0-1 GREEN Hydrogen Peroxide 30% 2-0-1 Oxy YELLOW Iodine-Monochloride Solution (Wijs Solution) 3-2-1 RED (Wijs Solution)Isoamyl Acetate 1-3-0 RED (Isopentyl Acetate)Isoamyl Alcohol 1-2-0 RED (3-Methyl-1-butanol, Isopentyl Alcohol)Isobutyl Acetate 1-3-0 RED Isobutyl Alcohol 1-3-0 RED (2-Methyl-1-propanol)Isopropyl Alcohol 1-3-0 RED (2-Propanol, Isopropanol)Isopropyl Ether 1-3-1 RED (Diisopropyl Ether)Karl Fischer Reagent 2-2-0 RED Karl Fischer Reagent Buffer Solution 3-3-1 RED Karl Fischer Reagent Composite 2 3-1-2 RED Karl Fischer Reagent Composite 5 3-1-2 RED Karl Fischer Reagent Composite 5K 3-1-2 WHITE Karl Fischer Reagent Solvent C2 3-3-1 RED Karl Fischer Reagent Solvent K1 3-2-2 BLUE Karl Fischer Reagent Solvent Oils 3-2-0 RED Karl Fischer Reagent Solvent Oils and Fats 3-2-0 RED Karl Fischer Reagent Titrant 2 2-3-1 RED Karl Fischer Reagent Titrant 5 2-3-1 RED Lactic Acid 2-0-0 WHITE Lutidine, 2,6- 2-3-0 RED (2,6-Dimethylpyridine)Methyl Acetate 1-3-0 RED Methyl Alcohol 1-3-0 RED (Methanol)Methyl Alcohol for Karl Fischer Reagent 1-3-0 RED (Methanol)Methyl Ethyl Ketone 1-3-0 RED (2-Butanone, Ethyl Methyl Ketone)Methyl Formate 2-4-0 RED
storage cheMical nfpa code synonyMs
Chemsafe (continued)
177
storage cheMical nfpa code synonyMs
Chemsafe (continued)
Methyl Isoamyl Ketone 1-2-0 RED (5-Methyl-2-hexanone)Methyl Isobutyl Ketone 2-3-1 RED (4-Methyl-2-pentanone)Methyl Methacrylate 2-3-2 RED Methyl Propyl Ketone 2-3-0 RED (2-Pentanone)Methyl t-Butyl Ether 1-3-0 RED (tert-Butyl Methyl Ether)Methyl-2-butanone, 3- 2-3-0 RED (Methyl Isopropyl Ketone)Methyl-2-pyrrolidinone, 1- 2-1-0 GREEN Methylbutane, 2- 1-4-0 RED (Isopentane)Methylcyclohexane 1-3-0 RED Methylimidazole, 1- 3-2-1 WHITE Mineral Oil, Heavy 0-1-0 GREEN (Paraffin Oil, Heavy; Liquid Petrolatum)Mineral Oil, Light 0-1-0 GREEN (Paraffin Oil, Light; Liquid Petrolatum)Morpholine 3-3-0 RED Nitric Acid 3-0-0 WHITE Nitrobenzene 3-2-1 BLUE Nitromethane 1-3-3 RED Octane 0-3-0 RED Octanesulfonic Acid, Sodium Salt, 1- 1-1-0 GREEN (Sodium 1-Octanesulfonate)Octanol, 1- 1-2-0 RED (n-Caprylic Alcohol, Octyl Alcohol)Octanol, 2- 1-2-0 RED (Capryl Alcohol)Oxidation Solution (0.02M Iodine in THF/Pyridine/Water, 70:20:10) 2-3-1 RED Oxidation Solution (0.02M Iodine in THF/Pyridine/Water, 89.6/0.4/10) 2-3-1 RED Oxidation Solution (0.05M Iodine in Pyridine/Water, 90:10) 3-3-0 RED Oxidation Solution (0.1M Iodine in THF/Pyridine/Water, 78:20:2) 2-3-1 RED Pentane 1-4-0 RED Pentanediol, 1,5- 1-1-0 GREEN (Pentamethylene Glycol)Pentanesulfonic Acid, Sodium Salt, 1- 1-1-0 GREEN (Sodium 1-Pentanesulfonate)Perchloric Acid 3-0-3 Oxy YELLOW Perchloric Acid (60-62%) 3-0-3 Oxy YELLOW Perchloric Acid (69-72%) 3-0-3 Oxy YELLOW Petroleum Ether 35-60°C 1-4-0 RED Petroleum Ether 60-80°C 1-3-0 RED Phenol, Fused Crystal 3-2-1 BLUE Phenol, Liquified 4-2-0 BLUE Phenol, Loose Crystals 4-2-0 BLUE Phosphoric Acid 85% 3-0-0 WHITE Phosphorus Oxychloride 4-0-2 WHITE Piperidine 3-3-0 RED Potassium Phosphate Monobasic 0-0-0 GREEN (Potassium Dihydrogen Phosphate)Propanediol, 1,3- 1-1-0 GREEN (Trimethylene Glycol)Propionaldehyde 2-3-2 RED Propionic Acid 3-2-0 WHITE Propyl Alcohol, n- 1-3-0 RED (1-Propanol, n-Propanol)Propylene Carbonate 1-1-0 GREEN (1,2-Propanediol Cyclic Carbonate)Propylene Glycol 0-1-0 GREEN (1,2-Propanediol)Propylene Glycol Monomethyl Ether 0-3-0 RED (1-Methoxy-2-propanol)Propylene Glycol Monomethyl Ether Acetate 0-2-0 RED (1-Methoxy-2-propyl Acetate)Propylene Glycol Propyl Ether 0-2-0 RED (1-Propoxy-2-propanol)Propylene Oxide 3-4-2 RED (1,2-Epoxypropane)Pyridine 3-3-0 RED Pyrrolidinone, 2- 2-1-0 GREEN (2-Pyrrolidone)Quinoline 2-1-0 BLUE Sodium Acetate Trihydrate 0-0-0 GREEN Sodium Bicarbonate 0-0-0 GREEN (Sodium Hydrogen Carbonate)Sodium Sulfate Anhydrous (Granular) 0-0-0 GREEN Sulfuric Acid 3-0-2 W WHITE Tetrabromoethane, 1,1,2,2- 3-0-1 BLUE Tetrabutylammonium Bromide 2-0-0 GREEN
178
Aquapoint Tedia pending
Absolv Tedia pending
Anhydrosolv Tedia pending
Carbitol Union Carbide
Celite Celite Corporation
Cellosolve Union Carbide
Florisil U.S. Silica Company
Teflon E.I. DuPont de Nemours & Co., Inc.
Triton Union Carbide
Tween Atlas Chemical Industries, Inc.
Trademarks
storage cheMical nfpa code synonyMs
Chemsafe (continued)
Tetrabutylammonium Hydrogen Sulfate 2-0-0 GREEN Tetrabutylammonium Hydroxide in Water (1M) 3-0-0 WHITE Tetrabutylammonium Phosphate 1-1-0 GREEN (Tetrabutylammonium Dihydrogen Phosphate)Tetrachloroethane, 1,1,2,2- 3-0-0 BLUE Tetrachloroethylene 2-0-0 BLUE Tetraheptylammonium Bromide 2-0-0 GREEN Tetrahydrofuran/BHT 2-3-1 RED Tetrahydrofuran/No BHT 2-3-1 RED Tetramethylammonium Hydroxide (10%) in Water 3-0-0 WHITE Tetramethylammonium Hydroxide (25%) in Methanol 3-0-0 WHITE Tetramethylammonium Hydroxide (25%) in Water 3-0-0 WHITE Toluene 2-3-0 RED Tributyl Phosphate 2-1-0 GREEN (Butyl Phosphate)Tributylamine 2-2-1 WHITE Trichlorobenzene, 1,2,4- 2-1-0 BLUE Trichloroethylene 2-1-0 BLUE Tricresyl Phosphate 2-1-1 BLUE (Tritolyl Phosphate)Triethanolamine 2-1-1 GREEN (Trolamine)Triethyl Orthoformate 2-3-0 RED Triethylamine 3-3-0 RED Triethylene Glycol 1-1-0 GREEN Triethylene Glycol Monomethyl Ether 0-1-0 GREEN Triethylenetetramine 3-1-0 WHITE Trifluoroacetic Acid 3-0-0 WHITE Trimethylbenzene, 1,2,4- 0-2-0 RED (Pseudocumene)Trimethylbenzene, 1,3,5- 0-2-0 RED (Mesitylene)Trimethylpentane, 2,2,4- 0-3-0 RED (Isooctane)Triton x-100 2-1-0 BLUE [Polyoxyethylene(10) Isooctylphenyl Ether]Triton x-405 2-1-0 BLUE [Polyoxyethylene(40) Isooctylphenyl Ether]Tween® 20 1-1-0 GREEN [Polyoxyethylene (20) Sorbitan Monolaurate]Tween® 40 1-1-0 GREEN [Polyoxyethylene (20) Sorbitan Monopalmitate]Tween® 60 1-1-0 GREEN [Polyoxyethylene (20) Sorbitan Monostearate]Tween® 80 1-1-0 GREEN [Polyoxyethylene (20) Sorbitan Monooleate]Tween® 85 1-1-0 GREEN [Polyoxyethylene (20) Sorbitan Trioleate]Water 0-0-0 GREEN xylene, m- 2-3-0 RED xylene, o- 2-3-0 RED xylene, p- 2-3-0 RED xylenes 2-3-0 RED
179
International Distributors① Argentina
Dorwil S.A.Fragata Heroina 5270, Grand BourgProvincia de Buenos AiresRepublica ArgentinaTel : 54 11 44631983dorwil@arnet-com-ar
② brazil
Tedia Brazil LTDARua Souza Barros, 567Eng Novo – Rio De janeiro - Rj Cep 20961-150 - BrazilTel : 55 21 21969000Fax: 55 21 [email protected]
③ China Mainland
Shanghai Weston Trading Co., Ltd.Room 1001, Wuzhou Int’l Building,807 Zhao jia Bang Road, 200032Shanghai, ChinaTel :86-21-64278270Fax:[email protected]
中国大陆上海跃胜贸易有限公司上海市肇嘉浜路807 号五洲国际大厦1001 室邮编:200032电话:86-21-64278270传真:[email protected]
④ Ecuador
Purifluidos Cia. LtdaUltimas Noticias N38-29 y El TelégrafoP.O. Box 17-11-5030Tel : (593)-(2)-2264956 / 2264049(593)-(2)-2450435 / 2451869GYE: (593)-(4)-2853003Fax: (593)-(2)[email protected]
⑤ Hong Kong
Universe Chemicals Trading Co., LtdWorkshop 6, On 6/F., Yale Industrial Cenre,61-63 Au Pui Wan Street, Fo Tan, N.T.Tel : 852 2374 3322Fax: 852 2781 [email protected]
⑥ India
Agarwal Chemical Agencies62, Wadia Bldg., 3rd Floor,9/B Cawasji Patel Street, Fort,MUMBAI - 400 001 [INDIA]Email to : [email protected] :0091-22-66369471/72Fax:0091-22-66369474
Chem Aroma Drug House4th Floor, Readymoney Terrace,167, Dr. Annie Besant Road, Worli, Mumbai - 400 018 [INDIA]Tel : 00-91-22-2493-4459 / 2493-8477Fax: 00-91-22-2493 2063 / 2801 [email protected] Chemilab Corporation89, Princess Street,2nd floor, Room # 27,Mumbai - 400 002 [INDIA]Tel : 00-91-22-2206 2057 / 2209-4383Fax: [email protected]
⑦ Indonesia
PT. Karunia jasindojl. jembatan Tiga Raya 36AG jakarta 14450, IndonesiaPhone: 62-021-6630352/3Fax: [email protected] [email protected]
⑧ Israel
RomicalEmek Sara POB 2153Beer-Sheva84874, IsraelTel : 972-8-6280210Fax: [email protected]
180
International Distributors
H O N G K O N G
ARCTIC OCEAN
N O R T HP A C I F I C
O C E A N
S O U T HA T L A N T I C
O C E A N
I N D I A NO C E A N
O C E A N
S O U T H
O C E A N
S O U T HP A C I F I C
O C E A N
N O R T HP A C I F I C
O C E A N
P A C I F I C
N O R T HA T L A N T I C
P E R U
M E X I C O
P A N A M A
C H I N A
P H I L I P P I N E S
I N D O N E S I A
North America
P A K I S T A N
I N D I A
B R A Z I L
N I G E R I A
J O R D A NI S R A E L
U A E
E C U A D O R
S O U T HK O R E A
A R G E N T I N A
T A I W A N
S I N G A P O R E
South America
Africa
Oceania
Asia
Antartica
Europe
���
�
�
�
��
�
�
⑨ Jordan
United Tetra GroupFor Medical & Scientific SuppliesTel : 4641487 - 4641497-4641499Fax : 4614234P.O.Box : 911844 Amman 11191 jordan [email protected]
٤٦١٤٢٣٤فاآس ٤٦٤١٤٩٧ - ٤٦٤١٤٨٧: تلفون ٤٦٤١٤٩٩لردن١١١٩١ عمان ٩١١٨٤٤صندوق بريد e-mail : [email protected]
⑩ Mexico
CTR ScientificAv. Lincoln 3410 pteCol. Mitras NorteMonterrey, N.L. CP 64320Tel : 81 81580600Fax: 81 [email protected]
Nigeria
LoladsonP.O. Box 8191, IkejaLagos State, NigeriaTel : 234-1-8042193Fax: [email protected]
Pakistan
ProTech (A Division of SynerTech Group) A-13, Humera Centre 188/1-A, Block 2, PECHS Karachi-75400 PakistanTel : 92-21-4390918Fax: [email protected]@yahoo.comwww.synertech.com.pk
181
H O N G K O N G
ARCTIC OCEAN
N O R T HP A C I F I C
O C E A N
S O U T HA T L A N T I C
O C E A N
I N D I A NO C E A N
O C E A N
S O U T H
O C E A N
S O U T HP A C I F I C
O C E A N
N O R T HP A C I F I C
O C E A N
P A C I F I C
N O R T HA T L A N T I C
P E R U
M E X I C O
P A N A M A
C H I N A
P H I L I P P I N E S
I N D O N E S I A
North America
P A K I S T A N
I N D I A
B R A Z I L
N I G E R I A
J O R D A NI S R A E L
U A E
E C U A D O R
S O U T HK O R E A
A R G E N T I N A
T A I W A N
S I N G A P O R E
South America
Africa
Oceania
Asia
Antartica
Europe
���
�
�
�
��
�
�
Panama
Quifar International S.A.0860 00523 Villa LucrePanama City, PanamaTel: (507) [email protected]
Peru
Kossodo SACjr. Chota 1161Lima 1 – PERUTelefono: 511 431 0918Tel: 511 431 4343Fax: 511 431 [email protected]
Philippines
Yana Chemodities. Inc. 151 Kaliraya St., Quezon CityTel : 732-2329 732-0163 731-3633Fax: [email protected]
Singapore
Prime Products Pte Ltd38 Gul Avenuejurong Industrial EstateSingapore 629678Tel : (65) 96881680Fax: (65) [email protected]
Tritech Scientific Pte Ltd7 Toh Guan Road East, #04-02,Alpha Industrial Building,Singapore 608599Tel : 65-62551605 / 65-65623954Fax: [email protected][email protected]
South Korea
Wonil Corp601Yungchun Ri Dongtan-MyunKyungki-Do, South KoreaTel : 82-2-914-8633Fax: [email protected]
Taiwan
Echo Chemicals Co Ltd16 Gongyeh RoadTouffen, 351, TaiwanTel : 886-37-629988Fax: [email protected]
UAE
Alliance Global FZ-LLCP.O. Box 500392Dubai, UAETel: +971-50-5581305Fax: [email protected]
182
US Distributors
�
��
�
�
�
�
�
�
�
�
183
�
��
�
�
�
�
�
�
�
�
① American International Chemical, IncAmerican International Chemical is Tedia’s Exclusive North American Distributor for liquid reagents for DNA synthesis.
1411 Watson Center RdCarson City, CA 90745T 800.238.0001F [email protected]
135 Newbury StreetFramingham, MA 01701T 800.238.0001F [email protected]
② American Scientific, Inc.PO Box 20847Portland, OR 97294T 503.255.8224F [email protected]
③ Andwin Scientific6636 Variel AveCanoga Park, CA 91303T 888.560.4969F [email protected]
④ Columbus Chemical Industries, Inc.N4335 Temkin Rd.P.O. Box 8Columbus, WI 53925T 920.623.2140F 920.623.2577customerservice@columbuschemical.comwww.columbuschemical.com
4430 N. 39th Ave.Phoenix, AZ 85019T 602.233.9893F 602.233.9897 [email protected]
⑤ Performance Chemicals Co. Inc.PO Box 361039San juan, PR 00936-1039T 787.788.3737F [email protected]
⑥ Reagents, Inc.4710 Sweden RoadCharlotte, NC 28224T 800.732.8484F [email protected]
P.O. Box 700383215 Ambrose AvenueNashville, TN 37207T 800.233.1836F [email protected]
⑦ Scientific Solutions LLC826 Roosevelt RoadRockford, IL 61109T 815.227.8778F [email protected]
⑧ The Lab Depot469 Lumpkin Campground RDDawsonville, GA 30534T 800.733.2522F [email protected]
184