techy tuesday, supra ekey
TRANSCRIPT
Techy TuesdaySupra eKEY
Bluetooth Setup
From your home screen, go into your phones settings.
Turn your Bluetooth on and tap to configure
Your phone will scan for nearby Bluetooth devices, while it is scanning hold your key fob about 6-12
inches away from your phone and press the grey button until the green light starts to
flash.
Key “Fob”
When your phone says “paired” it means that your fob and phone
have successfully paired via Bluetooth.
If you have any problems with opening
a lockbox while showing a house- come back to this screen and make sure the two
are paired.
Obtaining a key
Open up your eKEY app on your phone and select the “Obtain Key”
option.
Enter your personal PIN code by pressing the
numbers on the key pad.
Opening a shackle
Opening a shackle is just as easy as obtaining a key. Go to the home of the eKEY app and select “Open Shackle”
Put in the lockbox shackle code the same way you would put in your pin number and then select a reason. You can choose-Adding on a new listing-Removing from listing-Relocating on same listing-None of the above
I chose “none of the above”, but the other options can be useful.Then hold the key fob about a foot away from the lockbox.
You can also add the box to inventory. This is useful so that you don’t have to go BACK in to your supra account and add the box- the app does it for you!
After you successfully open the shackle to a box the app will let you know how much battery life is left in the box.
Read Activity
Go to the app home and select “Read Activity”
Put in the shackle code of the box that you want to read the activity of and hit
“Begin”while pressing the button on the key fob
This screen shows you the entire history of this
lockbox.
Adding a box to inventory
Go to the app home and select “Add
Keybox”
Enter the shackle code of the box
you would like to put in your inventory and press begin. Then take your key fob and point it 6-12 inches away
from the box.
Updating your key
You can update your key any time you are in an area with cell service. Go to the home
screen of the app and hit “Update
Key”
Just like that your key has been
updated!
Other Features
One of my favorite features of the eKEY app is the flashlight. If you ever need to
check a house at night or if it is getting dark while you are showing- this is a
helpful tool that will help you “light the
way”!
Just go to the home screen of the app and slide the screen to the right. You will see the flashlight
option and press it.
It doesn’t look very bright, but it actually is when it is dark outside. To exit all you need to do is tap the
screen.
Thanks for watching!
I hope that you have learned a lot about how to use the Supra eKEY and what useful features it has. If you are interested in
getting an eKEY stop by the board office and Rachel will be happy to assist you! You can also contact to board office if you have any
questions or need help with the app.