Cap�LampModel�KL4.5M

Technical�Datasheet

Features�

�

�

The KL4.5M is a high brightness, lightweight LEDminer’s safety cap lamp using a high capacity 4.5AhLi-Ion battery. Two brightness levels can beselected via a single switch.The cap lamp is constructed of a durable anti-staticplastic and the enclosure is explosion proof makingit suitable for fiery mines.The unit provides cost benefits as a result of lowermaintenance, longer service life (as compared tolead acid battery based products) and lessproduction time lost due to equipment failures andcheaper end of life disposal.

Operation�

�

�

The cap lamp provides continuous illumination formore than 15 hours at full brightness.The battery recharges within 6 hours and has anexpected life of over 1000 recharge cycles.The unit also incorporates a battery indicator andclock function.

Maintenance�

�

�

All service work to be performed by authorised AECElectronics personnel only.Approved for use in fiery mines.Cap lamp should only be charged with suppliedcharger.

Specifications

Warning�and�DisclaimerThe�information�and�recommendations�in�this�document�are�provided�for�reference�purposes�only�and�should�not�be�construed�as�advice�to�cover�every�application�of�the�product

or�variation�of�conditions�under�which�the�product�may�be�used.

6�hours�using�4.5V�1A charger.Charging Time

Single�piece�durable�plastic.Construction

77mm�x 61mm�x 55mm.Unit�Dimensions

0.24kg.Unit�Mass

-5°C�to�45°C.Temperature�Range

6�auxiliary�LEDs.Auxilary�LED�Light

1W�>40�Lumens.Main�LED�Light

>15�hours�(using�main�LED).Continuous�Usage Time

MASC�M/11-472X.IA Certificate�Number

Intrinsically�Safe�IA Approved

Unit�Dimensions

61mm

77mm

55mm

BatteryType

Capacity

3.6V�4.5Ah�Li-Ion.

>1000�recharge�cycles.

AEC�Electronics�(Pty)�Ltd

Tel:�+27�11�975-1643���Fax:�+27�11�975-1680Email:�sales@aece.co.za���http://www.aece.co.za

P.O.Box�958,�Kempton�Park,�1620,�South Africa