technical specifications polylam capsules · * colors are referred in janson capsules’ color...
TRANSCRIPT
T E C H N I C A L S P E C I F I C AT I O N S
• Polylaminate capsule• Aluminium top-disc with thermobonding side• 0 to 4 venting holes possible on the top disc• Height between 50 mm and 60 mm*
* Any other desired size shall be a subject for further study
P R I N T I N G C O L O R S & F I N I S H
• Rotogravure printing• Standard colors* available in a shorter lead time• Possibility to print up to 4 colors with di�erent �nishing touches: matte / shiny / glossy / pearly• Color-match research for any order from 35,000 capsules
* Colors are referred in Janson Capsules’ color chart
C U S T O M I Z AT I O N O P T I O N S
• Customization with hot-stamping or printing on skirt
• Customization with hot-stamping or printing on top-disc
• 14 hot-stamping colors* on stock with metallic, matte
and shiny �nish
• Embossing on top-disc
* Colors are referred in Janson Capsules’ color chart
P R O D U C T Q U A L I T Y
• Quality procedures in place to control the product
appearance, the product functionality and the product size
• Materials certi�cate of conformity (available upon request)
• BPA free (certi�cate available upon request)
J A N S O N C A P S U L E S U S A - A D I V I S I O N O F J A N S O N C A P S U L E S G R O U P
W W W . J A N S O N C A P S U L E S U S A . C O M
T E C H N I C A L S P E C I F I C A T I O N
P O L Y L A MC A P S U L E S
A. NITROCELLULOSE LACQUER
B. ALUMINIUM LAYER
C. POLYETHYLENE LAYER
D. ALUMINIUM LAYER
E. NITROCELLULOSE LACQUER
A
B
C
D
E
P R O D U C T C O M P O S I T I O N
DIAMETER (MIN and MAX)28.9mm to 31.8 mm
TAPER ANGLE (MAX)1.1 degrees
NOZZLE HEIGHT5mm
HEIG
HT (M
IN and M
AX
): 50m
m to 6
0 m
m