technical specifications, operaciónsandvik tamrock oy, p.o.box 100, fin-33311 tampere, finland...
TRANSCRIPT
Technical Specification7-6315-D2005-06-07
SOLO 5-7P
1/4
APPLICATION
The Tamrock Solo 5-7P is an electrohydraulic long-hole drilling rig for small and medium scale produc-tion drilling in underground mines. The rig is capableof drilling 64 - 102 mm holes up to 38 meters.
The rig has been designed for vertical and inclinedplane rings and fans and also for parallel long pro-duction holes as well as for long single holes. Therobust ZR 32P boom has 3,2 meters parallel drillingcoverage. It is designed especially for vein miningwith ability to drill close to both side walls.The 360° rotation in full parallel coverage area andwide tilt angle ranges forward and backward makethe boom suitable to additionally for other drillingapplications.
Simple and proven technical solutions ensureefficient and reliable operations. The rigid boom andfeed construction together with innovative centralizergive optimal drilling accuracy. Good stabilitycharacteristics enable fast tramming even in chal-lenging road conditions. Tramming is done from theoperator’s platform and drilling from a remote panel.
The new carrier is designed for better access to thedaily service points.
MAIN SPECIFICATIONS
Carrier 1 x TC 5Safety canopy 1 x FOPS ISO 3449Rock drill 1 x HL710SDrilling module 1 x LF 700 / Pito 5Rod handling system 1 x RC 700, optionBoom 1 x ZR 32PControl system 1 x TPC LH 5Powerpack 1 x HPP 555 (55 kW)Shank lubricating device 1 x KVL 10-1Air compressor 1 x CT 10Water pump 1 x WBP 2Main switch 1 x MSE-10Cable reel 1 x TCR 1Length 8 660 mmWidth 1 900 mmHeight 2 860 mmWeight 16 500 kgTramming speed:
- Horizontal- 14% = 1:7 = 8°
7.5 km/h3.5 km/h
Gradeability 28% = 1:3.5 = 15°Noise level (EN791,free field condition):
- Operator’s platform- Emitted
LpA = 102 dBLwA = 124 dB
Technical Specification7-6315-D2005-06-07
SOLO 5-7P
2/4
GENERAL DIMENSIONS
TC 5 CARRIER
Diesel engine Deutz BF4L 2011, 55 kW(74 hp), Catalyser
Transmission HydrostaticTransfer case Clark-Hurth Drop gearAxles Case New Holland
D63, boom endD45, engine end
Brakes:- Service
- Parking andemergency
Hydrostatic transmission+ positive brakingHydraulic oil immersedmultiple disc brakes onboth axles
Tyres 12.00 - 20 PR 20
Steering Frame steering,
Orbitrol
Articulation ±40°
Rear oscillation ±10°
Ground clearance 300 mm
Fuel tank 150 l
Hydraulic jacks 2 x Outriggers, front
2 x Hydraulic jacks, rear
HL710S ROCK DRILL
Weight 245 kg
Length 1 134 mm
Height 350 mm
Profile height 252 mm
Percussion power 19.5 kW
Max working pressure:
- Percussion 190 bar
- Rotation 175 bar
Max torque 860 Nm (OMT 200)
Hole size 64 -102 mm
Flushing water pressure 5 - 15 bar
LF 700 DRILLING MODULE
LF70x / Pito 5 x = 4’/5’/6’
CC 505 Cuttings collector
RC 700 ROD HANDLING SYSTEM
RC 70x, option
Capacity
x = 4’/5’/6’
20+1 rods/tubes
ZR 32P BOOM
Parallel coverage 3 255 mmFeed ext. LF 704
LF 705LF 706
985 mm1 050 mm1 200 mm
Boom weight, net 2 800 kgRotation angle 360°Stinger ext. (rear) 1 500 mm
2680 3100
9640
1040
360
30
30
15
30
2945 (
LF
704)
3250 (
LF
705)
3555
(LF
706
)
1615
Zoom
485
Technical Specification7-6315-C2005-04-07
SOLO 5-7P
3/4
TRAMMING DIMENSIONS
TPC LH 5 CONTROL SYSTEM
Power control Adjustable full powerAdjustable collaringpower
Anti-jamming control Adjustableanti-jamming pressure
Rotation control Adjustable rotationspeed
Flushing control Water flushing flow andpressure controlair-mist flushing,option
HPP 555 POWERPACK
Electric motor 1 x 55 kW 3-phase motor
Pump types:
- Percussion, feed &
boom + rod handling
- Rotation
Axial piston variable
displacement
Axial piston variable
displacement
Capacities:
- Percussion, feed &
boom + rod handling
- Rotation
1 x 130 l/min
1 x 60 l/min
Filtration:
- Pressure
- Return
1 x 20 micron
1 x 12 micron
Oil tank volume max 180 l
Tank filling 1 x manual pump
Oil cooling 1 x OW 30 water cooler
AIR AND WATER CIRCUIT
Compressor type: 1 x CT 10 (7.5 kW)- Capacity 1.0 m
3/min (7 bar)
Shank lubricating device: 1 x KVL 10-1- Air consumption 250-350 l/min
- Oil consumption 250-400 g/h
Water pump type: 1 x WBP 2 (4.0 kW)
- Capacity 100 l/min (10 bar)
Water pressure valve: 1 x WP 42
- Max intake pressure 42 bar
- Max flow 200 l/min with 1 bar
pressure drop
ELECTRICAL SYSTEM
Total input power 73 kWMain switch 1 x MSE-10Standard voltages 380...690 V/ 50 or 60 HzVoltage fluctuation Max ±10%Lighting:
- Working lights
- Driving lights
2 x 35 W, 24 V (H.I.D.),portable4 x 70 W, 24 V
Positioning lights 2 x Laser type
Automatic cable reel 1 x TCR 1
R5750
R3290
40
2145
1945 2
860
2680 3100
8660
1600
17 17
Technical Specification7-6315-D2005-06-07
SOLO 5-7P
SANDVIK TAMROCK OY, P.O.Box 100, FIN-33311 Tampere, FINLANDTel.int. +358 205 44 121, Telefax int. +358 205 44 120
4/4
COVERAGE AREA
MINIMUM DRIFT SIZEDRILLING MODULE H W WP HR
LF 704 3 150 3 150 1 890 1 615LF 705 3 450 3 450 2 190 1 615LF 706 3 750 3 750 2 490 1 615
Included 100 mm clearance on each side
MAXIMUM DRIFT SIZE *)
DRILLING MODULE H W WP HR
LF 704 3 900 4 800 3 255 1 870LF 705 4 200 5 100 3 255 1 870LF 706 4 350 5 250 3 255 1 870
*) with rear stingers in use without optional front stinger
OPTIONAL EQUIPMENT
DRILLING SYSTEM
Rod handling system RC 700Readiness for double tools system; rods and tubesDrilling instrumentation TIS, P,D,DP, DDS, DDSPData logging for TISFront stinger (needed for downholes)Air mist flushing with outer compressed air feedPower extractor for HL710SHL800S (stabilizer)
ELECTRICAL SYSTEM
Electric cable rubber or PURGround fault and over current unit, VYK 200Portable ground fault and over current unit,VYK P (max 440 V)* 1 000 V electric systemStar-Delta starting (380 … 690 V only)230 V outlet max 4 500 VA3-phase outlet network voltage
CARRIER
Deutz BF4M 2012 Diesel engine (74kW)Exhaust scrubberD63 axle at engine end (instead of D45)Complete spare wheel TC 5 (D63, boom end axle)Complete spare wheel TC 5 (D45, engine end axle)Michelin X mine D2 wheels instead or standardHand pump for manual brake release
OTHER OPTIONAL EQUIPMENT
Fire extinguisher (bottle only)Manual fire suppression system, 6 nozzlesAutomatic fire suppression system, 6 nozzlesPressure cleaning system (15 bar) with reelHigh pressure cleaning system with reel andhand setWater hose 65m, 1½”* Electric filling pump for hydraulic oilGreasing system (Lincoln) with pump,reel and nozzleCentralized greasingAutomatic greasing system (Lincoln)Biodegradable oilsFast filling and evacuation system (Wiggins); for fuelFast filling and evacuation system (Wiggins); for fuel,transmission, engine and hydraulic oil* EU, UL, CSA, AUS norms package
*) replaces standard component
www.tamrock.sandvik.comSANDVIK TAMROCK reserves the right to change this specification without further notice
OPTIONAL2000 mm LF705 LF7061700 mm LF704
530 530WP
W
H
HR
1900
530
32
55
pa
ralle
l5
30
with
RC
22
5 w
ith
ou
t R
C
1715
90
90
610
775
R770
30
30