technical overview - a123.g.akamai.neta123.g.akamai.net/7/123/11558/abc123/forestservic... · the...
TRANSCRIPT
LX™6 GEO-TECHNICAL DRILL (DB525)Technical Overview
Cop
yrig
ht ©
201
1 Bo
art L
ongy
ear.
All r
ight
s re
serv
ed.
Cop
yrig
ht ©
201
1 Bo
art L
ongy
ear.
All r
ight
s re
serv
ed. LX™6 GEO-TECHNICAL DRILL
HIGH DRILLING POWER IN A SMALL PACKAGE, THE MULTIPURPOSE LX™6 IS AN ESSENTIAL TOOL ON TODAY'S JOB SITE
Power and VersatilityThe LX6 features a powerful Deutz D914 L04 air cooled dieselengine that produces 53 kw (71 hp) of power at 2,300rpm.The LX6 also has a maximum breaking torque of 20.5 kNm(15,120 lb-ft) and 55 kN (12,364 lbf) of pull back force.
DesignThe LX6 is capable of both wireline and conventionalcoring as well as DTH, rotary and auger drilling methods.This multipurpose rig was specifically designed to be extremely versatile with its powerful steel crawlers, mast dump/raisingability and 220 mm double clamps.
SafetyThe LX6 comes loaded with standard safety features. The safety cage ensures drillers remain a safe distance from thedrill string, while low speed and low torque rotation ensuressafe rod management. The steel crawlers coupled with theLX6's upright stability make this machine extremely stable onuneven formations.
For more information on the LX™6 scan with a QR codereader on your smart phone. Patents 7,770,668 and 7,779,932
1
2
3
4
Cop
yrig
ht ©
201
1 Bo
art L
ongy
ear.
All r
ight
s re
serv
ed.
TECHNOLOGY 1000 mm mast dump forimproved positioning on roughterrain
1
SAFETY Standard safety features includea safety cage, low speed andlow torque rotation for safe rod management
3
INNOVATION Hydraulic side shift for easyrod-pulling and clear accessto center line
2
VERSATILITY 220 mm double clamp for makingand breaking rod joints quickly andsafely
4
5
DRILL ANYWHERE Powerful steel crawlers ensure mobility on difficult terrain
5
LX™6 TECHNICAL INFORMATION
Cop
yrig
ht ©
201
1 Bo
art L
ongy
ear.
All r
ight
s re
serv
ed.
Drilling Depth Guidelines
Hole Depth Meters Hole Depth U.S.
Core drilling
NQ / NQ2” / NV / NV2” 350 m 1,150 ft
HQ / HV 220 m 710 ft
PQ / PV 145 m 480 ft
SQ 90 m 290 ft
Rotary drilling (Tricone)
Hole diameter 216 mm (8.5 in) 175 m 570 ft
Auger drilling
Hole diameter 150 mm (5.9 in) 15-20 m 49-65 ft
DTH drilling package
Maximum size DTH hammer 98 mm (3-7/8 in) @ max 17,2 m3 / min @ max 24 bar
Maximum depth capacity 290 m 950 ft
Recommended hole size 115 mm 4.5 in
Maximum hole size 127 mm 5 in
Recommended rod size 76.1 mm 3 in
Prime Mover Metric U.S.
Standard DEUTZ D914 L04 air cooled engine, COM III, 4 cylinder Fuel Diesel Fuel Consumption 225 g/kWh Maximum Power 53 kW @ 2.300 rpm 71 hp @ 2,300 rpm Electrical Circut 12V Fuel Tank Capacity 60 l 16 gal
Prime Mover for Higher Ambient Temperature / Elevations - Optional Equipment Metric U.S.
Engine DEUTZ BF4L914 air cooled engine, COM II, 4 cylinderturbocharged
Fuel Diesel Fuel Consumption 223 g/kWh Maximum Power 72,4 kW @ 2.300 rpm 94 hp @ 2,300 rpm Electrical Circut 12V Fuel Tank Capacity 60 l 16 gal
3
Rotary Head DD52 Metric U.S.
Low Gear 4,880 - 980 Nm / 52-265 rpm 3,560 - 723 lb-ft / 52 - 265 rpm High Gear 1,855 - 360 Nm / 140 - 708 rpm 1,368 - 265 lb-ft / 140 - 708 rpm Bore - Inside Diameter 62 mm 2.44 in Flushing Head - InsideDiameter
22 mm 0.87 in
Rotation Motors Danfoss - variable / reversible with pressure remote Top Drive Flange 2 3/8” API Reg PIN Hydraulic Motor at Max / Min Displacement, Diesel Engine at 2200 rpm Gear Ratio 1st - 7.68 : 1 2nd - 2.92 : 1 Rotary Head Carriage with Side Shift
Rotary Head HY79 Metric U.S.
Low Gear 6,540 Nm / 39 rpm 4,824 lb-ft / 39 rpm High Gear 320 Nm / 800 rpm 236 lb-ft / 800 rpm Bore - Inside Diameter 52 mm 2 in Flushing Head - InsideDiameter
24 mm 1 in
Rotation Motors Parker V12-80 + Danfoss TMT 315 Top Drive Flange 2 3/8” API Reg PIN Gear Ratio 4.047:1 Distance From Drilling Line toChain
435 mm 17.12 in
Rotary Head Carriage with Side Shift and tip-out
Hydraulic System Metric U.S.
Primary Pump Parker bent axis, fixed displacement Maximum Flow 66 lpm @ 2,200 rpm 17.5 gpm @ 2,200 rpm Maximum Pressure 250 bar 3,626 psi
Secondary Pump Cassappa gear pump Maximum Flow 59 lpm @ 2,200 rpm 15.5 gpm @ 2,200 rpm Maximum Flow (2nd) 48 lpm @ 2,200 rpm 12.5 gpm @ 2,200 rpm Maximum Pressure 175 bar 2,538 psi hp Oil Tank Capacity 200 l 53 gal
Cop
yrig
ht ©
201
1 Bo
art L
ongy
ear.
All r
ight
s re
serv
ed.
4
LX™6 TECHNICAL INFORMATION
Cop
yrig
ht ©
201
1 Bo
art L
ongy
ear.
All r
ight
s re
serv
ed.
Drill Mast and Feed System Metric U.S.
Feed Stroke 4000 mm 13.2 ft Feed Speed - Up 12,5 m/min 41 ft/min Feed Speed - Down 18 m/min 59 ft/min Fast Feed Speed - Up 31 m/min 101 ft/min Fast Feed Speed - Down 51 m/min 167 ft/min Pull Down Force 34 kN 7,673 lbf Pull Back Force 55 kN 12,364 lbf Drilling Inclination 45° horizontal to 90° vertical down Mast Dump 1000 mm 3.3 ft
Max. Rod Length 3000 mm 10 ft
Main Winch Metric U.S.
Line Pull 30 kN 6,744 lbf Line Speed - Bare Drum 29 m/min 95 ft/min Line Speed - Full Drum 36 m/min 118 ft/min Cable Length, 14 mm 35 m 114.8 ft
Rod Clamps Metric U.S.
Maximum Diameter 220 mm 8.6 in Maximum Clamping Capacity 175 kN 4,500 lbf Maximum Breaking Torque 20,5 kNm 15,120 lb ft
Centralizer - Rod Guide Metric U.S.
Exchangeable Inserts for Rods 56, 76, 89, 114, 127, 140, 168, 193, 220 mm (Choose required sizes)
Undercarriage Metric U.S.
Type Crawler mounted triple grouser steel tracks Maximum Driving Speed 1,5 km/h 1 mph Axis Distance 1715 mm 67.5 in Maximum Ground Pressure 0,053 MPa 7.7 psi Climbing Capacity (with winchsupport)
(Grade ability 60%) approximately 30°
Optional Undercarriage Trailer Mounted, Skid Mounted
5
Mast Extension for Longer Rod Pull Metric U.S.
Maximum Rod Pull 2 x 3 m (6 m) 20 ft Fitted onto Standard Mast to Pull 6 m Rod Rod Storage 30 pieces of 76 mm (3 in) rods Towing Hook on Rear of Rig Air Connection on Rear of Rig for DTH Compressor
Optional Equipment
Wireline Winch Metric U.S.
Line Pull - Bare Drum 6,5 kN 1461 lbf Line Pull - Full Drum 4,0 kN 90 lbf Line Speed - Bare Drum 100 m/min 327 ft/min Line Speed - Full Drum 200 m/min 656 ft/min Cable Length 5 mm 350 m 1150 ft
Mud Pump DP100 Metric U.S.
Continuous Flow 90 l/min 23.7 gpm Pressure 30 bar 435 psi
Mud Pump W1122BCD Metric U.S.
Continuous Flow 130 l/min 34 gpm Pressure 60 bar 870 psi
FMC Pump L0918 Metric U.S.
Flow 100 l/min 26 gpm Pressure 45 bar 652 psi
Standard Penetration Test (SPT) Auto Hammer Metric U.S.
Impact Rate 1-30 bpm Travel Length 762 mm 30 in Hammer Weight 63,5 kg 140 lb
Oil Line Lubricator for DTH Drilling Metric U.S.
Oil Tank Capacity 10 l 2.7 gal
Cop
yrig
ht ©
201
1 Bo
art L
ongy
ear.
All r
ight
s re
serv
ed.
6
LX™6 TECHNICAL INFORMATION
Cop
yrig
ht ©
201
1 Bo
art L
ongy
ear.
All r
ight
s re
serv
ed.
High Temperature Oil Cooler Upgraded Oil Cooler For Ambient Temperatures Over 35°C (95°F)
Night Lights No. of Pieces 4
Jaw Body for Clamp and Break Out for Coring Jaw Plates For Coring BQ™ / BW (Choose Required Sizes) NQ™ / NW
HQ™ / HW PW
Mist Pump Metric U.S.
Flow 30 l/min 8 gpm Pressure 200 bar 2,900 psi
Accessories Auxiliary Work Vice 180 mm wide, 220 mm long, 120 mm deep clamp, rotating mounting
base and separate rod support work bracket Remote Control Radio remote control for driving Auxiliary Diesel Filling Pump Electric powered diesel filling pump Instrument Vandal Covers Lockable covers for control panels and instruments Rubber Crawler Pads Full set (76 pcs) Tool Box With necessary set of tools for basic maintenance and lubrication Environmental Oil In Hydraulic System
Weight Operational Weight = approx. 6,500 kg (14,330 lb)Dry Weight = 6,200 kg (13,670 lb)
Consisting of:Diesel power unit group Deutz D914L04 4.10liter 4 cylinderHydraulic moduleMain winch c/w cableHydraulic mast raising (independent)Lower mast assemblyLevelling jacks (hydraulic)Rotary headCrawler - triple grouser type12V BatteryFoot Clamp and breaking cl
Max. pull on inner layerclimbing capacity without support winchgrade ability 37%, approx. 20°
7
Measurements
2691
mm
(8.8
3 ft)
6827 mm (22.4 ft)
Length:6827 mm (22.4 ft)
Height:2748 mm (9.02 ft)
Height (with mast extended): 8103 mm (26.6 ft)
Width (without rod rack):2000 mm (6.6 ft)
Cop
yrig
ht ©
201
1 Bo
art L
ongy
ear.
All r
ight
s re
serv
ed.
8
Cop
yrig
ht ©
201
1 Bo
art L
ongy
ear.
All r
ight
s re
serv
ed.
Measurements
8103
mm
(26.
6 ft)
1900 mm (6.23 ft) 27
48 m
m (9
.02
ft)
9
NOTES
Cop
yrig
ht ©
201
1 Bo
art L
ongy
ear.
All r
ight
s re
serv
ed.
10
Global Headquarters Canada Boart Longyear Boart Longyear10808 South River Front Parkway 2442 South Sheridan WaySuite 600 Mississauga, OntarioSouth Jordan, Utah 84095 Canada L5J 2M7 United States of America [email protected] [email protected]
Tel: +1 905 822-7922 Tel: +1 801 972 6430 Fax: +1 905 822-7232 Fax: +1 801 977 3374
Latin America EuropeBoart Longyear Boart LongyearPortal Riesco 12 Avenue des MorginesAv. El Salto 4001, Huechuraba CH1213 Petit-Lancy, Santiago, Chile 858 0641 Geneva, Switzerland [email protected] [email protected]
Tel: +56 2 595 3300 Tel: +41 22 709 0800 Fax: +51 242 671 Fax: +41 22 709 0801
MINING AND EXPLORATION DRILLING PRODUCTS
Asia Pacific Boart Longyear26 Butler Boulevard Adelaide, 5950 Australia [email protected]
Tel: +61 8 8375 8375 Fax: +61 8 8375 8497
Sub-Saharan Africa Boart LongyearCycad House, Constantia Office ParkCnr 14th Avenue and Hendrik PotgieterWeltevreden Park, 1709 Gauteng, South [email protected]
Tel: +27 11 767 9300 Fax: +27 11 767 9301
Cop
yrig
ht ©
201
1 Bo
art L
ongy
ear.
All R
ight
s R
eser
ved.
Diamond Products Genuine Q™ Wireline Rods and CasingTooling
www.BoartLongyear.com • ASX: BLY Jan 2012
Page 1 of 3
CATERPILLAR�16M�MOTOR GRADER
Dimensions
A.�OVERALL LENGTH 32.7�ft in 9963�mm
B.�WIDTH OVER TIRES 10.2�ft in 3095�mm
C.�HEIGHT TO TOP OF CAB 12.2�ft in 3703�mm
D.�WHEELBASE 22.9�ft in 6985�mm
E.�REAR GROUND CLEARANCE 1.3�ft in 407�mm
F.�FRONT GROUND CLEARANCE 2.3�ft in 688�mm
G.�TANDEM AXLE WHEELBASE 6�ft in 1841�mm
H.�BLADE BASE 10.1�ft in 3069�mm
http://www.ritchiespecs.com/specification?type=construction+equipment&category=Moto... 2/17/2014
Page 2 of 3
�
CATERPILLAR�16M�MOTOR GRADER
Specification
Engine
MAKE
MODEL
NET POWER GEAR 12
NET POWER GEAR 34
POWER MEASURED @
NET POWER GEAR 56
NUMBER OF CYLINDERS
NET POWER GEARS 78
MAX POWER
NET TORQUE GEARS 78
DISPLACEMENT
Operational
STD OPERATION WEIGHT FRONT AXLE�STD OPERATION WEIGHT REAR AXLE�STD OPERATION WEIGHT TOTAL�MAX OPERATION WEIGHT FRONT AXLE�MAX OPERATION WEIGHT REAR AXLE�MAX OPERATION WEIGHT TOTAL�FUEL CAPACITY�COOLING SYSTEM FLUID�CAPACITY�HYDRAUILC SYSTEM FLUID�CAPACITY�REAR DIFF/FINAL DRIVE�FLUID CAPACITY�CIRCLE GEARBOX FLUID�CAPACITY�TANDEM CASE FLUID�CAPACITY (EACH)�TIRE SIZE�
Transmission
TYPE
NUMBER OF GEARS
FORWARD NUMBER OF GEARS REVERSE
MAX SPEED FORWARD
MAX SPEED REVERSE
Steering
ARTICULATION L/R
TURNING RADIUS
Front Axle
WHEEL LEAN
OSCILLATION TOTAL
GROUND CLEARANCE
Hydraulic System
PUMP TYPE
PUMP FLOW
RELIEF VALVE PRESSURE
Moldboard
MOLDBOARD WIDTH
MOLDBOARD HEIGHT
MOLDBOARD THICKNESS
MAX DEPTH OF CUT
SIDE SHIFT LEFT
SIDE SHIFT RIGHT
BLADE PULL AT MAX WEIGHT
BLADE DOWN PRESSURE
Circle
DIAMETER
SHIFT LEFT
SHIFT RIGHT
MAX REACH OUTSIDE TIRES LEFT
Caterpillar
C13 ACERT VHP
302�hp
312�hp
2000�rpm
312�hp
6
312�hp
312�hp
1261.2�lb ft
763�cu in
15679�lb
41773�lb
57452�lb
24073�lb
54570�lb
78643�lb
135�gal
12.3�gal
30.1�gal
30.1�gal
2.1�gal
32.1�gal
225�kw
232.7�kw
232.7�kw
232.7�kw
232.7�kw
1710�Nm
12.5�L
7112�kg
18948�kg
26060�kg
10919�kg
24753�kg
35672�kg
511�L
46.5�L
114�L
114�L
8�L
121.5�L
18.0025 12PR (G2)
direct drive, power shift, countershaft
8
6
33.5�mph
26.5�mph
20�degrees
29.2�ft in
18.2�degrees
32�degrees
2.3�ft in
variable piston
74�gal/min
3500�psi
16�ft in
31�in
1�in
19.2�in
25.6�in
43.1�in
49156�lb
42957.1�lb
71.8�in
25.5�in
23.5�in
90�in
53.9�km/h
42.6�km/h
8.9�m
688�mm
280�L/min
24150�kPa
4877�mm
787�mm
25�mm
488�mm
740�mm
1094�mm
22297�kg
19485�kg
1822�mm
647�mm
597�mm
2282�mm
MAX REACH OUTSIDE TIRES
http://www.ritchiespecs.com/specification?type=construction+equipment&category=Moto... 2/17/2014
Page 3 of 3
http://www.ritchiespecs.com/specification?type=construction+equipment&category=Moto... 2/17/2014
Page 1 of 4
CAT 320C HYDRAULIC EXCAVATOR SPECIFICATIONS
Engine Units: US
Engine Model Cat® 3066T Cat® 3066T
Net Flywheel Power 138 hp 103 kW
Net Power - ISO 9249 138 hp 103 kW
Net Power - SAE J1349 138 hp 103 kW
Net Power - EEC 80/1269 138 hp 103 kW
Bore 4.02 in 102 mm
Stroke 5.12 in 130 mm
Displacement 389 in3 6.37 L
Gross Power 143 hp 107 kW
Weights
Operating Weight 46300 lb 21000 kg
Operating Weight - Std. Undercarriage 43400 lb 19700 kg
Operating Weight - Long Undercarriage 46300 lb 21000 kg
Drive
Maximum Drawbar Pull 44040 lb 196 kN
Maximum Travel Speed 3.4 mph 5.5 km/h
http://www.darlingsons.com/excavators/cat_320c_hydraulic_excavator_m.htm 2/17/2014
Page 2 of 4
Hydraulic System
Main Implement System - Maximum Flow (2x)
54.2 gal/min 205 L/min
Max. pressure - Equipment 4980 psi 34300 kPa
Max. pressure - Travel 4980 psi 34300 kPa
Max. pressure - Swing 3625 psi 25000 kPa
Pilot System - Maximum flow 10.8 gal/min 41 L/min
Pilot System - Maximum pressure 600 psi 4120 kPa
Boom Cylinder - Bore 5 in 120 mm
Boom Cylinder - Stroke 52 in 1260 mm
Stick Cylinder - Bore 5.5 in 140 mm
Stick Cylinder - Stroke 56 in 1430 mm
B1 Family Bucket Cylinder - Bore 5 in 120 mm
B1 Family Bucket Cylinder - Stroke 41 in 1030 mm
C Family Bucket Cylinder - Bore 5 in 130 mm
C Family Bucket Cylinder - Stroke 46 in 1150 mm
Service Refill Capacities
Fuel Tank Capacity 106 gal 400 L
Cooling System 7.9 gal 30 L
Engine Oil 7.9 gal 30 L
Swing Drive 2.1 gal 8 L
http://www.darlingsons.com/excavators/cat_320c_hydraulic_excavator_m.htm 2/17/2014
Page 3 of 4
Final Drive (each) 2.6 gal 10 L
Hydraulic System (including tank) 53 gal 200 L
Hydraulic Tank 32 gal 120 L
Standards
Brakes SAE J1026 APR90 SAE J1026 APR90
Cab/FOGS SAE J1356 FEB88
ISO 10262 SAE J1356 FEB88
ISO 10262
Swing Mechanism
Swing Speed 11.5 RPM 11.5 RPM
Swing Torque 45611 lb ft 61.8 kN·m
Track
Standard w/Standard Undercarriage 24 in 600 mm
Standard w/Long Undercarriage - Triple Grouser
32 in 800 mm
Optional 24 in 600 mm
Optional 28 in 700 mm
Optional 32 in 800 mm
Dimensions
Transport width 125.2 in 3180 mm
http://www.darlingsons.com/excavators/cat_320c_hydraulic_excavator_m.htm 2/17/2014
Page 4 of 4
BACK TO HYDRAULIC EXCAVATORS
http://www.darlingsons.com/excavators/cat_320c_hydraulic_excavator_m.htm 2/17/2014
Page 1 of 2
CATERPILLAR�320C�HYDRAULIC EXCAVATOR
Boom/Stick Option Boom/Stick Option (HEX) 4
A.�SHIPPING LENGTH OF UNIT 30.7�ft in 9371�mm
C.�SHIPPING HEIGHT OF UNIT 13.3�ft in 4057�mm
I.�MAX CUTTING HEIGHT 40.6�ft in 12390�mm
J.�MAX LOADING HEIGHT 31.6�ft in 9640�mm
K.�MAX REACH ALONG GROUND 36.5�ft in 11140�mm
M.�MAX DIGGING DEPTH 19.6�ft in 5960�mm
Dimensions
B.�WIDTH TO OUTSIDE OF TRACKS 9.2�ft in 2800�mm
D.�LENGTH OF TRACK ON GROUND 10.7�ft in 3260�mm
E.�GROUND CLEARANCE 1.5�ft in 460�mm
G.�HEIGHT TO TOP OF CAB 9.7�ft in 2950�mm
H.�TAIL SWING RADIUS 9.1�ft in 2770�mm
Undercarriage
F.�TRACK GAUGE 7.2�ft in 2200�mm�
N.�SHOE SIZE 23.6�in 600�mm�
http://www.ritchiespecs.com/specification?type=construction+equipment&category=Hydr... 2/17/2014
Page 2 of 2
�
CATERPILLAR�320C�HYDRAULIC EXCAVATOR
Specification
Engine
MAKE Caterpillar
MODEL ATAAC engine 2066
GROSS POWER 138�hp 102.9�kw
Operational
OPERATING WEIGHT 47972.6�lb 21760�kg
Undercarriage
SHOE SIZE 23.6�in 600�mm
MAX TRAVEL SPEED 3.4�mph 5.5�km/h
DRAWBAR PULL 44062.6�lb 196�kN
TRACK GAUGE 7.2�ft in 2200�mm
Buckets
REFERENCE BUCKET CAPACITY1�yd3 0.8�m3
Boom/Stick Option (HEX) 1
boom w/ stick R1.9C BOOM/STICK OPTION (HEX) 1
1900mm
SHIPPING HEIGHT OF UNIT 9.9�ft in 3011�mm
SHIPPING LENGTH OF UNIT 32.9�ft in 10042�mm
MAX DIGGING DEPTH 13.6�ft in 4160�mm
MAX REACH ALONG GROUND 30.7�ft in 9350�mm
MAX CUTTING HEIGHT 35.6�ft in 10850�mm
MAX LOADING HEIGHT 25.2�ft in 7690�mm
MAX VERTICAL WALL DIGGING 10.8�ft in 3280�mm
DEPTH
Boom/Stick Option (HEX) 2
boom w/ stick R2.5B BOOM/STICK OPTION (HEX) 2
2500mm
SHIPPING HEIGHT OF UNIT 9.9�ft in 3011�mm
SHIPPING LENGTH OF UNIT 31.9�ft in 9710�mm
MAX DIGGING DEPTH 15.1�ft in 4600�mm
MAX REACH ALONG GROUND 32.2�ft in 9820�mm
MAX CUTTING HEIGHT 33.6�ft in 10250�mm
MAX LOADING HEIGHT 27.8�ft in 8480�mm
MAX VERTICAL WALL DIGGING 12.3�ft in 3760�mm
DEPTH
Boom/Stick Option (HEX) 3
boom w/ stick R2.9B BOOM/STICK OPTION (HEX) 3
2900mm
SHIPPING HEIGHT OF UNIT 9.9�ft in 3011�mm
SHIPPING LENGTH OF UNIT 31.8�ft in 9692�mm
MAX DIGGING DEPTH 16.5�ft in 5020�mm
MAX REACH ALONG GROUND 33.6�ft in 10240�mm
MAX CUTTING HEIGHT 38.1�ft in 11620�mm
MAX LOADING HEIGHT 29.2�ft in 8900�mm
MAX VERTICAL WALL DIGGING 13.6�ft in 4160�mm
DEPTH
Boom/Stick Option (HEX) 4
BOOM/STICK OPTION (HEX) 4 boom w/ stick R3.9B
SHIPPING HEIGHT OF UNIT 13.3�ft in 4057�mm
SHIPPING LENGTH OF UNIT 30.7�ft in 9371�mm
MAX DIGGING DEPTH 19.6�ft in 5960�mm
MAX REACH ALONG GROUND 36.5�ft in 11140�mm
MAX CUTTING HEIGHT 40.6�ft in 12390�mm
MAX LOADING HEIGHT 31.6�ft in 9640�mm
MAX VERTICAL WALL DIG 16.6�ft in 5060�mm
DEPTH
Dimensions
WIDTH TO OUTSIDE OF 9.2�ft in 2800�mm
TRACKS
HEIGHT TO TOP OF CAB 9.7�ft in 2950�mm
GROUND CLEARANCE 1.5�ft in 460�mm
TAIL SWING RADIUS 9.1�ft in 2770�mm
LENGTH OF TRACK ON 10.7�ft in 3260�mm
GROUND
http://www.ritchiespecs.com/specification?type=construction+equipment&category=Hydr... 2/17/2014
Page 1 of 2
CATERPILLAR�420D�LOADER BACKHOE
Backhoe
J.�LOAD HEIGHT STD 11.9�ft in 3613�mm
K.�REACH FROM SWIVEL STD 18.5�ft in 5650�mm
L.�DIG DEPTH STD 14.4�ft in 4390�mm
M.�REACH AT LOAD HEIGHT STD 2.8�ft in 862�mm
Dimensions
A.�TRANSPORT LENGTH 22.9�ft in 6974�mm
B.�TRANSPORT WIDTH 7.7�ft in 2352�mm
C.�TRANSPORT HEIGHT 11.8�ft in 3585�mm
D.�WHEELBASE 6.9�ft in 2100�mm
E.�GROUND CLEARANCE 0.97�ft in 297�mm
F.�HEIGHT TO TOP OF CAB 9.1�ft in 2770�mm
Loader
G.�CLEARANCE AT MAX DUMP HEIGHT
H.�REACH AT MAX DUMP HEIGHT
8.3�ft in 2544�mm
2.7�ft in 835�mm
I.�DIG DEPTH 5.3�in 135�mm
http://www.ritchiespecs.com/specification?type=Construction+Equipment&category=Load... 2/17/2014
Page 2 of 2
�
CATERPILLAR�420D�LOADER BACKHOE
Specification
Engine
MAKE Caterpillar
MODEL 3054T
GROSS POWER 88�hp 65.6�kw
NET POWER 85�hp 63.4�kw
DISPLACEMENT 244.1�cu in 4�L
POWER MEASURED @ 2200�rpm
NUMBER OF CYLINDERS 4
Operational
OPERATING WEIGHT 4WD 15763.1�lb 7150�kg
FUEL CAPACITY 33.8�gal 128�L
TURNING RADIUS 17.6�ft in 5350�mm
TIRE SIZE FRONT 2WD / 11Lx16,12PR/12.5 / 4WD 80x18,10PR
19.5x24,10PR / REAR TIRES SIZE 2WD/4WD
19.5L24,10PR
Transmission
TYPE power shuttle
NUMBER OF FORWARD 4
GEARS
NUMBER OF REVERSE GEARS 4
MAX SPEED FORWARD 20.4�mph 32.8�km/h
MAX SPEED REVERSE 20.4�mph 32.8�km/h
Backhoe
DIG DEPTH STD 14.4�ft in 4390�mm
DIG DEPTH EXT 18.1�ft in 5510�mm
REACH FROM SWIVEL STD 18.5�ft in 5650�mm
REACH FROM SWIVEL EXT 21.9�ft in 6675�mm
BUCKET DIG FORCE STD 14712�lb 6673.3�kg
BUCKET DIG FORCE EXT 14586�lb 6616.1�kg
LOAD HEIGHT STD 11.9�ft in 3613�mm
LOAD HEIGHT EXT 13.7�ft in 4175�mm
REACH AT LOAD HEIGHT 2.8�ft in 862�mm
STD�REACH AT LOAD HEIGHT
2.5�ft in 751�mm EXT
Loader
BUCKET CAPACITY 1.3�yd3 0.96�m3
BUCKET WIDTH 89.1�in 2262�mm
BUCKET BREAKOUT FORCE 10138.9�lb 45.1�kN
LIFT CAPACITY AT FULL 6384.6�lb 2896�kg
HEIGHT
CLEARANCE AT MAX DUMP 8.3�ft in 2544�mm
HEIGHT REACH AT MAX DUMP
2.7�ft in 835�mm HEIGHT
DIG DEPTH 5.3�in 135�mm
Hydraulic
PUMP TYPE LSPC, closed center
PUMP FLOW CAPACITY 43.1�gal/min 163�L/min
RELIEF VALVE PRESSURE 3300.2�psi 22754�kPa
Dimensions
TRANSPORT LENGTH 22.9�ft in 6974�mm
TRANSPORT WIDTH 7.7�ft in 2352�mm
TRANSPORT HEIGHT 11.8�ft in 3585�mm
HEIGHT TO TOP OF CAB 9.1�ft in 2770�mm
WHEELBASE 6.9�ft in 2100�mm
GROUND CLEARANCE 0.97�ft in 297�mm
http://www.ritchiespecs.com/specification?type=Construction+Equipment&category=Load... 2/17/2014
Specifications Track Type Tractor (Dozer) CAT D9
Desert King Heavy Equipment Rental LLC Page 1 of 7
Desert King Heavy Equipment Rental LLC Page 2 of 7
Desert King Heavy Equipment Rental LLC Page 3 of 7
Desert King Heavy Equipment Rental LLC Page 4 of 7
Desert King Heavy Equipment Rental LLC Page 5 of 7
Desert King Heavy Equipment Rental LLC Page 6 of 7
Desert King Heavy Equipment Rental LLC Page 7 of 7
Page 1 of 2
CATERPILLAR�972H�WHEEL LOADER
Bucket
10.7�ft G.�DUMP CLEARANCE AT MAX RAISE 3252�mm
in
Dimensions
A.�LENGTH WITH BUCKET ON
GROUND
B.�WIDTH OVER TIRES
C.�HEIGHT TO TOP OF CAB
D.�WHEELBASE
E.�GROUND CLEARANCE
F.�HINGE PIN MAX HEIGHT
H.�REACH AT MAX LIFT AND DUMP
30�ft in 9144�mm
9.7�ft in 2956�mm
11.8�ft 3606�mm
in�11.3�ft�
3450�mm in
1.6�ft in 496�mm
14.7�ft 4466�mm
in
4.3�ft in 1291�mm
http://www.ritchiespecs.com/specification?type=Construction+Equipment&category=Whe... 2/17/2014
Page 2 of 2
�
CATERPILLAR�972H�WHEEL LOADER
Specification
Engine
MAKE Caterpillar
MODEL C13 ACERT
NET POWER 287�hp 214�kw
GROSS POWER 311�hp 232�kw
POWER MEASURED @ 1800�rpm
DISPLACEMENT 762.8�cu in 12.5�L
TORQUE MEASURED @ 1400�rpm
MAX TORQUE 983�lb ft 1332�Nm
Operational
OPERATING WEIGHT 55451�lb 25148�kg
FUEL CAPACITY 100.4�gal 380�L
HYDRAUILC SYSTEM FLUID 29�gal 110�L
CAPACITY
ENGINE OIL FLUID CAPACITY 9.3�gal 35�L
COOLING SYSTEM FLUID CAPACITY 10.3�gal 39�L
TRANSMISSION FLUID CAPACITY 9.3�gal 35�L
FRONT AXLE/DIFF FLUID 16.9�gal 64�L
CAPACITY
REAR AXLE/DIFF FLUID CAPACITY 16.9�gal 64�L
STATIC TIPPING WEIGHT 42043�lb 19067�kg
TURNING RADIUS 24�ft in 7469�mm
OPERATING VOLTAGE 24�V
ALTERNATOR SUPPLIED 80�amps
AMPERAGE
REAR AXLE OSCILLATION 26�degrees
TIRE SIZE 26.525
Transmission
TYPE Powershift
NUMBER OF FORWARD GEARS 4
NUMBER OF REVERSE GEARS 4
MAX SPEED FORWARD 22.9�mph 36.9�km/h
MAX SPEED REVERSE 24�mph 38.8�km/h
Hydraulic System
PUMP TYPE Piston
RELIEF VALVE PRESSURE 1000�psi 6900�kPa
PUMP FLOW CAPACITY 80.6�gal/min305�L/min
RAISE TIME 5.9�sec
DUMP TIME 2.1�sec
LOWER TIME 2.4�sec
Bucket
BREAKOUT FORCE 51750�lb 230�kN
DUMP CLEARANCE AT MAX RAISE 10.7�ft in 3252�mm
BUCKET WIDTH 10.6�ft in 3220�mm
BUCKET CAPACITY HEAPED 6�yd3 4.6�m3
BUCKET CAPACITY STRUCK 5.2�yd3 4�m3
Dimensions
LENGTH WITH BUCKET ON 30�ft in 9144�mm
GROUND
WIDTH OVER TIRES 9.7�ft in 2956�mm
HEIGHT TO TOP OF CAB 11.8�ft in 3606�mm
GROUND CLEARANCE 1.6�ft in 496�mm
WHEELBASE 11.3�ft in 3450�mm
HINGE PIN MAX HEIGHT 14.7�ft in 4466�mm
REACH AT MAX LIFT AND DUMP 4.3�ft in 1291�mm
http://www.ritchiespecs.com/specification?type=Construction+Equipment&category=Whe... 2/17/2014
Lang DH-90 Series Tophead Rotary Rig Specification Sheet
Sandvik QJ331 jaw crusher Technical specification sheet
The QJ331 jaw crusher further develops the very latest technology used within the Q-range of mobile jaw crushers manufactured by Sandvik. Incorporating sturdy construction, its power management system coupled with a unique jaw design, makes the QJ331 ideal for the recycling and contractor segment of the market. Its compact size, enhanced mobility and high crushing speed together with large feed opening provide impressive rates of production and is able to sustain superb reduction ratios.
•� Improved jaw plate retention. •� Danfoss hydraulic control system for excellent efficiency with all
controls located at ground level for ease of access and maintenance. •� Full PLC control system and Danfoss colour screen allowing visual
data output of all plant operating parameters. •� Improved load control system for feeder drive to ensure continuous,
uninterrupted crushing. •� Level sensor fitted to jaw to control feed rate into the crusher thereby
maximising production. •� Hydraulic raise and lower facility on the main conveyor to give
increased clearance for rebar discharge in recycling applications. •� Steel pipe work used extensively to give superior heat dissipation
and to provide a maintenance free sealing solution. •� Speed wheel fitted to main conveyor to stop the feeder, negating the
need to dig out a heavily loaded conveyor.
•� Now fitted with a hydraulically driven oil cooler capable of operating in the most hostile environments with a 50°C ambient temperature capability without any oil changes.
•� Hydraulically driven cooling fan allows fan speed control to give increased efficiency and auto reverse facility to periodically back flush any dust build up in the radiator.
•� Different applications catered for through Sandvik advanced crusher wear plate technology.
•� Enhanced fuel economy with emissions reduced by up to 45% for lower cost of ownership, and reduced carbon footprint.
These new features are aimed at ensuring the QJ331 is now as user and environmentally focused as it is productive and versatile. The QJ331 is designed to be equally productive in both hard rock and recycling applications and is therefore the ultimate all round workhorse providing maximum efficiency and productivity whilst minimising cost of ownership.
Technical specifications
QJ331 Hopper
Type Hyd Folding - Side and Rear
Width 2500 mm / 8’ 2½”
Length 4500 mm / 14’ 9”
Level Capacity 7 m³ / 9 yds³
Heaped Capacity 8 m³ / 10.5 yds³
Rear Loading Height 4143 mm / 13’ 7”
Feeder
Type Hyd - Variable Speed Grizzly
Width 1040 mm / 41”
Total Length 4170 mm / 13’ 8”
Grizzly Length 1600 mm / 63”
Standard Aperture 40 - 63 mm / 1½” - 2½”
Crusher
Type Single Toggle - CJ211:01
Feed Opening 1100 x 700 mm / 43 x 28”
Speed 285 rpm
Adjustment Type Hyd Wedge
Drive Hyd via V Belts
CSS Range 40 - 175 mm / 1½” - 7”
Motor Type Danfoss
Motor cc 250 cc / 15.25 cu inch
Main Conveyor
Belt Width 1000 mm / 39½”
Belt Length (endless) 21400 mm / 70’ 2½”
Discharge Height 3350 mm / 11’ 0”
Raise/Lower Yes - Hydraulic
Head Drum Diameter 289 mm / 11½”
Tail Drum Diameter 273 mm / 10½”
Drive Hyd Motor
Motor CC 624 cc / 38.1 cu inch
Tracks
Length (Centres) 3850 mm / 12’ 7½”
Width (Shoe) 500 mm / 19¾”
Drive Hyd / Gearbox
Control Radio / Umbilical
QJ331 Powerpack
Engine Stage 3A / Tier 3 CAT C9 Acert or Stage 3B / Tier 4i CAT C9.3 Acert
Engine Power 261 kW / 350 hp
Diesel Tank Capacity 660 litres / 174 US Gal
Hyd Tank Capacity 660 litres / 174 US Gal
Standard Options
Magnet
Model Eriez CP20/100 - SC2
Weight 1300 kg / 2866 lbs
Belt Width 800 mm / 32”
Height From Belt Adjustable
Type Self Cleaning
Natural Fines Conveyor
Belt Width 650 mm / 25½”
Belt Length (endless) 6630 mm / 21’ 9”
Discharge Height 2100 mm / 6’ 10½”
Drive Hyd Motor
Motor CC 160 cc / 9.76 cu inch
General Tech Data
Transport Dimensions
Length 14.65 m / 48’ 0”
Width 2.85 m / 9’ 3”
Height 3.40 m / 11’ 2”
Cubic Volume 142 m³ / 5014 ft³
Standard Weight 46,860 kg / 103,310 lbs
Operating Dimensions
Length 14.50 m / 47’ 7”
Width 4.65 m / 15’ 2”
Height 4.15 m / 13’ 7½”
Standard Weight 46,860 kg / 103,310 lbs
Performance
Optimum Feed Size 560 mm³ / 22 inch³
Capacity (up to) 300 tph / 336 stph
Travel Speed 1.0 km/h / 0.62 mph
Max Incline 20°
Max Incline (Side to Side) 10°
Note. All weights and dimensions are for standard units only (full diesel tank)
Options Wear resistant hopper liner plates back and sides Main conveyor dust cover Belt protection plate under jaw crusher discharge Lighting mast and cabinet lights Central auto lube (all bearings) Pull stop cords on the main and natural fines conveyor Hydraulic breaker arm complete with hammer Intelligent line multi-machine communication Water pump (Hydraulic) Engine filter kit - 250 hours (Air and oil for 3A engines only) Arctic package -20°C (-4°F) (32 Grade hydraulic oil and engine oil) Plant and engine filter kit - 500 hours (3A engine) Arctic package -30°C (-22°F) (arctic hydraulic oil, engine oil, webasto coolant heater Plant and engine filter kit - 500 hours (3B engine) and grease) No overband magnet Main conveyor level sensor (stockpile monitor) No natural fines conveyor Remote diesel pump (electric) Tool box and contents
SP5-
368
© S
andv
ik M
inin
g an
d C
onst
ruct
ion
Oy
2011
SA
ND
VIK
is a
reg
iste
red
trad
emar
k ow
ned
by S
andv
ik In
telle
ctua
l Pro
pert
y A
B in
Sw
eden
and
oth
er c
ount
ries
The units depicted show all options currently available, and the colour scheme reflects the eventual scheme to be used. Current models may differ from those featured in this brochure. Please contact Sandvik to clarify specification and options. The material in this brochure is of general application for information and guidance only, and no representation or warranty is made or given by the manufacturer that its products will be suitable for a customer’s particular purpose and enquiry should always be made of the manufacturer to ensure such suitability. Whilst reasonable efforts have been made in the preparation of this document to ensure its accuracy. The manufacturer assumes no liability resulting from errors or omissions in this document, or from the use or interpretation of the information contained herein. The manufacturer reserves the right to make changes to the information in this brochure and the product design without reservation and without notification to users.
S A N DV I K CO N S T RU C TI O N M O B I L E C RU S H E R S A N D SC R E E N S LT D H E A RT H COT E ROA D S WA D L I N COT E D E R BYS H I R E D E11 9 D U E N G L A N D TEL +44 (0)1283 212121 FAX +44 (0) 1283 217342 in fo.mobi lecs@sandv ik .com www.construct ion.sandv ik .com