technical drawing in engineering · lecture 6. axonometric projection system representation of a...
TRANSCRIPT
![Page 1: Technical Drawing in Engineering · Lecture 6. Axonometric projection system Representation of a line Line r’ is defined by 2 of its projections, the other 2 can be obtained from](https://reader036.vdocuments.us/reader036/viewer/2022081516/5f5c864eccd83474ea5822d6/html5/thumbnails/1.jpg)
Technical Drawing in Engineering
Lecture 6. Axonometric projection system
![Page 2: Technical Drawing in Engineering · Lecture 6. Axonometric projection system Representation of a line Line r’ is defined by 2 of its projections, the other 2 can be obtained from](https://reader036.vdocuments.us/reader036/viewer/2022081516/5f5c864eccd83474ea5822d6/html5/thumbnails/2.jpg)
Lecture 6. Axonometric projection system
Basics I
The View point is very far away
![Page 3: Technical Drawing in Engineering · Lecture 6. Axonometric projection system Representation of a line Line r’ is defined by 2 of its projections, the other 2 can be obtained from](https://reader036.vdocuments.us/reader036/viewer/2022081516/5f5c864eccd83474ea5822d6/html5/thumbnails/3.jpg)
Lecture 6. Axonometric projection system
Basics II
Plane : Plane of the paper.
The projection can be orthogonal or oblique.
Coordinate axes (XYZ): Origin in O and perpendicular between them.
Axonometric axes (X’Y’Z’).
O
![Page 4: Technical Drawing in Engineering · Lecture 6. Axonometric projection system Representation of a line Line r’ is defined by 2 of its projections, the other 2 can be obtained from](https://reader036.vdocuments.us/reader036/viewer/2022081516/5f5c864eccd83474ea5822d6/html5/thumbnails/4.jpg)
Lecture 6. Axonometric projection system
Axonometric orthogonal projection
Trimetric system:
≠ ≠
Dimetric system:
= ≠ / ≠ = / = ≠
Isometric system:
= =
![Page 5: Technical Drawing in Engineering · Lecture 6. Axonometric projection system Representation of a line Line r’ is defined by 2 of its projections, the other 2 can be obtained from](https://reader036.vdocuments.us/reader036/viewer/2022081516/5f5c864eccd83474ea5822d6/html5/thumbnails/5.jpg)
Lecture 6. Axonometric projection system
Representation of a point
To define the position of a point only 2 of its 4 projections are required. A’ Direct projection of the point.
A’1 Horizontal projection.
A’2 Vertical projection
A’3 Second vertical projection.
A2’ A3’
A1’
A’
z’
y’ x’
![Page 6: Technical Drawing in Engineering · Lecture 6. Axonometric projection system Representation of a line Line r’ is defined by 2 of its projections, the other 2 can be obtained from](https://reader036.vdocuments.us/reader036/viewer/2022081516/5f5c864eccd83474ea5822d6/html5/thumbnails/6.jpg)
Lecture 6. Axonometric projection system
Representation of a line Line r’ is defined by 2 of its
projections, the other 2 can be obtained from these.
Data: r’ y r’1.
Find r’2 and r’3.
The traces are the intersections of the direct projection (r’) and the horizontal (H), vertical (V) and second vertical (W).
Hr’ intersection of lines r’ and r’1.
Vr’ intersection of r’ and r’2.
Wr’ intersection of r’ and r’3.
![Page 7: Technical Drawing in Engineering · Lecture 6. Axonometric projection system Representation of a line Line r’ is defined by 2 of its projections, the other 2 can be obtained from](https://reader036.vdocuments.us/reader036/viewer/2022081516/5f5c864eccd83474ea5822d6/html5/thumbnails/7.jpg)
Lecture 6. Axonometric projection system
Representation of a plane It is represented by its traces.
The 3 traces cut in the axes in pairs.
These traces, when enlarged, form the Triangle of traces. Each of the vertex of the triangle are in the axes.
Triangle of traces
![Page 8: Technical Drawing in Engineering · Lecture 6. Axonometric projection system Representation of a line Line r’ is defined by 2 of its projections, the other 2 can be obtained from](https://reader036.vdocuments.us/reader036/viewer/2022081516/5f5c864eccd83474ea5822d6/html5/thumbnails/8.jpg)
Lecture 6. Axonometric projection system
Membership: Line and plane
z’
r’
x’ y’
h’
w’
Vr’
Hr’
Wr’
v’
The traces of the line must be on the traces of the plane (and the other way round):
Vr’ over v’
Hr’ over h’
Wr’ over w’
![Page 9: Technical Drawing in Engineering · Lecture 6. Axonometric projection system Representation of a line Line r’ is defined by 2 of its projections, the other 2 can be obtained from](https://reader036.vdocuments.us/reader036/viewer/2022081516/5f5c864eccd83474ea5822d6/html5/thumbnails/9.jpg)
Lecture 6. Axonometric projection system
Reduction coefficients I
xx
y
y
zz
ec
e
ec
e
ec
e
![Page 10: Technical Drawing in Engineering · Lecture 6. Axonometric projection system Representation of a line Line r’ is defined by 2 of its projections, the other 2 can be obtained from](https://reader036.vdocuments.us/reader036/viewer/2022081516/5f5c864eccd83474ea5822d6/html5/thumbnails/10.jpg)
Lecture 6. Axonometric projection system
Reduction coefficients II
cos
cos
cos
xx
y
y
zz
ec
e
ec
e
ec
e
’
'sen
'sen
'sen
![Page 11: Technical Drawing in Engineering · Lecture 6. Axonometric projection system Representation of a line Line r’ is defined by 2 of its projections, the other 2 can be obtained from](https://reader036.vdocuments.us/reader036/viewer/2022081516/5f5c864eccd83474ea5822d6/html5/thumbnails/11.jpg)
Lecture 6. Axonometric projection system
Reduction coefficients III
Isometric system:
2 2 2
22
3 2 0.816x y z
x x y z
x y z
c c cc c c c
c c c
2 2 2 2x y zc c c
’ ’
’ ' ' 'x y zc c c sen sen sen
2 2 2 2 2 2
2 2 2
' ' '
3 cos ' cos ' cos ' 2
x zyc c c sen sen sen
2 2 2cos ' cos ' cos ' 1
![Page 12: Technical Drawing in Engineering · Lecture 6. Axonometric projection system Representation of a line Line r’ is defined by 2 of its projections, the other 2 can be obtained from](https://reader036.vdocuments.us/reader036/viewer/2022081516/5f5c864eccd83474ea5822d6/html5/thumbnails/12.jpg)
Lecture 6. Axonometric projection system
Parallelism and perpendicularity
![Page 13: Technical Drawing in Engineering · Lecture 6. Axonometric projection system Representation of a line Line r’ is defined by 2 of its projections, the other 2 can be obtained from](https://reader036.vdocuments.us/reader036/viewer/2022081516/5f5c864eccd83474ea5822d6/html5/thumbnails/13.jpg)
Lecture 6. Axonometric projection system
Parallelism and perpendicularity
![Page 14: Technical Drawing in Engineering · Lecture 6. Axonometric projection system Representation of a line Line r’ is defined by 2 of its projections, the other 2 can be obtained from](https://reader036.vdocuments.us/reader036/viewer/2022081516/5f5c864eccd83474ea5822d6/html5/thumbnails/14.jpg)
Lecture 6. Axonometric projection system
Construction of an isometric drawing I
X
Y
Z Draw in the axes direction
![Page 15: Technical Drawing in Engineering · Lecture 6. Axonometric projection system Representation of a line Line r’ is defined by 2 of its projections, the other 2 can be obtained from](https://reader036.vdocuments.us/reader036/viewer/2022081516/5f5c864eccd83474ea5822d6/html5/thumbnails/15.jpg)
Lecture 6. Axonometric projection system
Construction of an isometric drawing II
X
Y
Z Non isometric lines
![Page 16: Technical Drawing in Engineering · Lecture 6. Axonometric projection system Representation of a line Line r’ is defined by 2 of its projections, the other 2 can be obtained from](https://reader036.vdocuments.us/reader036/viewer/2022081516/5f5c864eccd83474ea5822d6/html5/thumbnails/16.jpg)
Lecture 6. Axonometric projection system
Construction of an isometric drawing II
X
Y
Z
Inclined surfaces Angles
X
Y
Z
![Page 17: Technical Drawing in Engineering · Lecture 6. Axonometric projection system Representation of a line Line r’ is defined by 2 of its projections, the other 2 can be obtained from](https://reader036.vdocuments.us/reader036/viewer/2022081516/5f5c864eccd83474ea5822d6/html5/thumbnails/17.jpg)
Lecture 6. Axonometric projection system
Construction of an isometric drawing III
X
Y
Z
Irregular lines
![Page 18: Technical Drawing in Engineering · Lecture 6. Axonometric projection system Representation of a line Line r’ is defined by 2 of its projections, the other 2 can be obtained from](https://reader036.vdocuments.us/reader036/viewer/2022081516/5f5c864eccd83474ea5822d6/html5/thumbnails/18.jpg)
Lecture 6. Axonometric projection system
Construction of an isometric drawing IV