technical data d3 - zünd systemtechnik ag
TRANSCRIPT
ZST-
01-2
019-
m&
k
Technical Data D3
Specifications
repeatability 1) ± 0,03 mm / ± 0.001”
position accuracy 1) ± 0,1 mm/m / ± 0.0012”/ft + repeatability
floor load requirements 200 kg/m² / 45 lbs/ft²
interface 2x Ethernet 10/100Mbit
operating temperature 10-35 °C / 50-95 °F
elative humidity 10-80 % non condensing
noise emission 2) < 75 dB(A)
beam height 60 mm / 2.3”
electrical requirements AC 3ph+N+GND, 208/400 V, 50/60 Hz, 32 A
max. material weight30 kg/m² / 6 lbs/ft² (manual loading)(can affect the evenness of the working surface)
max. working length one beam, maximum feed length
without re-gripping2760 mm
Minimum beam approach (tool insert beam A
to tool insert beam B)440 mm
1) X/Y drive system, static, at constant operating temperature (may vary depending on cutting tool/method).2) Noise levels may vary between <75 dB(A) and ~85 dB(A) depending on ambient conditions and type of cutting technology, materials, and vacuum generator being used.3) Depending on cutter size, modules.
Speed, acceleration 3)
max. speed X/Y-axis 1414 mm/s / 55”/s
max. acceleration X/Y-axis 9,3 m/s² / 366”/s²
max. speed Z-axis 500 mm/s / 20”/s
max. acceleration Z-axis 10 m/s2 / 393”/s²
max. rotation speed T-axis 44.2 rad/s
max. rotation acceleration T-axis 3068 rad/s2
Base machineSpecifications, speed, acceleration
Technical data subject to change without notice.
Base machineDimensions, weight, material
Technical data subject to change without notice.
Technical Data D3
Type Working area (C × D)Overall dimensions,
incl. workstation (A × B)max. Materialwidth
Machine weight
L-32003200 mm × 1800 mm
125” × 70”o4480 mm × 3610 mm
176” × 142”1800 mm
70”1290 kg2835 lbs
XL-32003200 mm × 2270 mm
125” × 89”o4480 mm × 4080 mm
176” × 161”2270 mm
89”1460 kg3220 lbs
2XL-32003200 mm × 2740 mm
125” × 107” 4480 mm × 4550 mm
176” × 179”2740 mm
107”1600 kg3530 lbs
3XL-32003200 mm × 3210 mm
125” × 126”4480 mm × 5020 mm
176” × 198”3210 mm
126”1800 kg3960 lbs
B
A
C
XX
Zünd Systemtechnik AGIndustriestrasse 8 ∙ CH-9450 Altstätten ∙ T +41 71 554 81 00 ∙ [email protected] ∙ www.zund.com
The lenght of X varies depending on the used cutter extension.Technical data subject to change without notice.
Cutter with light curtain and material transportDimensions
Technical Data D3
TypeOverall dimensions
(A + 2X) × BOverall dimensions incl. workstation
(A + 2X) × C
L-3200(5756 mm + 2X) × 2734 mm
(227” + 2X) × 108”(5756 mm + 2X) × 3693 mm
(227” + 2X) × 145”
XL-3200(5756 mm + 2X) × 3204 mm
(227” + 2X) × 126”(5756 mm + 2X) × 4163 mm
(227” + 2X) × 164”
2XL-3200(5756 mm + 2X) × 3674 mm
(227” + 2X) × 145”(5756 mm + 2X) × 4633 mm
(227” + 2X) × 183”
3XL-3200(5756 mm + 2X) × 4144 mm
(227” + 2X) × 163”(5756 mm + 2X) × 5103 mm
(227” + 2X) × 201”