www.berdisled.com

B0101-01/2.5F

Technical ApplicationGuide for Berdis LightingLED Spotlight

www.berdisled.com sales2@berdisled.com

Application notes

•The lamp must be installed by professional

electrician.

•Ensure the power supply is switched off before

fitting this product

•Keep away from corrosive gas

It is designed for general lighting applications in home,office, supermarket, shop, school, hotel, etc. It is also widely used for public areas, such as

stairway, lobby, reception, corridors etc.

Certificate

Introduction

B0101-01 model is an ultra slim spotlight provide a wide range of applications.

and perfect combination of light efficiency,light comfort and design.

Features

1. Super slim design LED spotlight with Reflector/lens. 2. External driver and junction box facilitate easy installation.

3. Good heat dissipating to ensure long life.

4. Triac / DALI / 0-10V Dimmable version options.

5. Fitting Color:white sandblasted,black sandblasted,nickel brushed.

6. Shape of Housing Options: Round and square.

6. Color Temperature Options: 2700K;Dim to warm;3000K;4000K;6000K; RGBW APP Smart control with TUYA;3000-6000K APP Smart control with TUYA

www.berdisled.com sales2@berdisled.com

60

85

75 326

41

Fixture CompatibilityRated

WattageElectrical

ClassificationIngress

Protection Operating

TempOperatingHumidity

Storage Temp

5/7/9W Ⅱ IP21/54/65 -20oC~45oC 0~90% -20oC~65oC

Product Information

Technical Specifications

Model Voltage PowerPowerFactor

Beamangle

DimmableLumen(±5%)

CCT Lifespan CRI Dimension

B0101-01 AC100-277V 5W ≥0.5 60° No

465 2700K

50,000h ≥90Ø85*26mm

cutout 75mm

475 3000K

480 4000K

485 6000K

AC200-240V 5W ≥0.9 60° Yes

2700K

50,000h ≥903000K

4000K

6000K

AC100-277V 7W ≥0.5 60° No

2700K

50,000h ≥903000K

4000K

6000K

AC200-240V 7W ≥0.9 60° Yes

670 2700K

50,000h ≥90680 3000K

685 4000K

690 6000K

Driver data Sheet(Flicker-free Driver)Driver Type Reverse-phase Dimming Non dim

Input rated Voltage AC100-277V

Frequency 50/60Hz

Input Voltage AC90-305V

Efficiency ≥92%

Wattage 5W 5W

Power Factor ≥0.5

Rated input current ≤0.1A ≤0.1A

Full load output Voltage DC14-25V DC25-42V

Rated output current 260mA 135mA

Output current range 260mA±5% 135mA±5%

Power tolerance

Current output tolerance

Dimming range —

Dimmer —

Short circuit protection

Over voltage protection

Over temperature protection

Ø85*26mm cutout 75mm

Ø85*26mm cutout 75mm

Ø85*26mm cutout 75mm

B0101-01

B0101-01

B0101-01

7W

≤0.1A

DC14-25V

260mA

260mA±5%

AC100-277V

50/60Hz

AC90-305V

≥92%

7W

≥0.5

≤0.1A

DC25-42V

135mA

135mA±5%

—

—

460

470

475

480

675

685

690

695

Dim to Warm

5W

≤0.1A

DC14-25V

260mA

260mA±5%

3 Steps Current

AC230V

50Hz

AC200-240V

≥90%

5W

≥0.9

≤0.1A

DC14-25V

260mA

260mA±5%

±5%

±5%

10%-100%

RPC

PASS

PASS

PASS

7W

≤0.1A

DC14-25V

260mA

260mA±5%

9W

≤0.1A

DC14-25V

260mA

260mA±5%

AC200-240V 7W ≥0.9 60°Dim to

440-201800K 50,000h ≥97

Ø85*26mm cutout 75mmB0101-01

2800-Warm

Dim to Warm Healthy Lightness

Brightness change from 100% to 10%

when CCT change from 2800K to 1800K

at the same time.

Dim to warm version is big range used

We have this dim to warm version controled with TUYA

system on mobile phone as well.

at homes and hotels.

Please consult to us if you have inquiry on smart control

dim to warm version.

①

②②

③③

for indoor use only

for indoor use only,include bathroom.

for indoor use only,include shower room.

www.berdisled.com sales2@berdisled.com

The driver lifespan is based on capacitor working temperature.

Driver lifetime & LED light decay rate

90000

80000

70000

60000

50000

40000

30000

20000

10000

065oC 75oC 85oC 95oC 105oC

Lif

eti

me (

ho

urs

)

Capacitor Tc (oC)

Driver Lifetime

% L

um

ino

us

Flu

x

FLUX

△ U'V'

110%

105%

100%

95%

90%

85%

80%

75%

70%

0.0040

0.0035

0.0030

0.0025

0.0020

0.0015

0.0010

0.0005

0.0000

0 1000 2000 3000 4000 5000 6000 7000 8000 9000 10000

LifeTime (hours)

LED Light Decay Rate

Temperature

● The testing is operated at 25°C

● The lifetime of capacitor, minimum of 5,000 hours if operated at 105°C, will be doubled whenever the temperature drops 10°C

● The highest withstand temperature of IC, MOS could be 120°C

● The highest withstand temperature of LED junction temperature is 150°C

80

70

60

50

40

30

20

10

0

18:3

7:4

619:0

7:4

419:3

7:4

420:0

7:4

420:3

7:4

421:0

7:4

421:3

7:4

422:0

7:4

423:0

7:4

423:3

7:4

40:0

7:4

40:3

7:4

41:0

7:4

41:3

7:4

42:0

7:4

42:3

7:4

43:0

7:4

43:3

7:4

44:0

7:4

44:3

7:4

45:0

7:4

45:3

7:4

46:0

7:4

46:3

7:4

47:0

7:4

47:3

7:4

48:0

7:4

48:3

7:4

49:0

7:4

4

IC

Capacitor

MOS

PCB

LED

Fitting

Environmental temperature

Tem

pera

ture

(oC

)

Time

• Ip21:no water-proof ring .

• Ip54 :water-proof ring①

• Ip65 :water-proof ring①②③

030

60

90

120

150-/+180

-150

-120

-90

-60

-30

Distribution Curve of Meridian

Unit: cd— c0 /180— c30/210— c60/240— c90/270

550

440

330

220

110

Reflector Versions

Half-Intensity Angle：24°

030

60

90

120

150-/+180

-150

-120

-90

-60

-30 Unit: cd— c0 /180— c30/210— c60/240— c90/270

440

352

264

176

88

Half-Intensity Angle：45°

030

60

90

120

150-/+180

-150

-120

-90

-60

-30 Unit: cd— c0 /180— c30/210— c60/240— c90/270

320

256

192

128

64

Half-Intensity Angle：60°P.S.:This is the beam angle

we default for normal shipping.

Distribution Curve of Meridian Lens Versions

030

60

90

120

150-/+180

-150

-120

-90

-60

-30 Unit: cd— c0 /180— c30/210— c60/240— c90/270

2800

2240

1680

1120

560

Half-Intensity Angle：15°

030

60

90

120

150-/+180

-150

-120

-90

-60

-30 Unit: cd— c0 /180— c30/210— c60/240— c90/270

1700

1360

1020

680

340

Half-Intensity Angle：21°

Unit: cd— c0 /180— c30/210— c60/240— c90/270

Half-Intensity Angle：32°

Unit: cd— c0 /180— c30/210— c60/240— c90/270

Half-Intensity Angle：46°

30

60

90

120

150-/+180

-150

-120

-90

-60

-30 1300

1040

780

520

260

30

60

90

120

150-/+180

-150

-120

-90

-60

-30 750

600

450

300

150

Packaging Information

SIZE(CM)N.W/pc(KGS)

G.W.(KGS) Q'TY(PCS)

Carton 52.5*21.5*37 0.25 13 50

CTNS Q'TY(PCS) VOLUME(CBM)

20'' standardcontainer

683 34150 28

40'' standardcontainer

1366 68300 56

www.berdisled.com sales2@berdisled.com Phone: +86 133 8096 1319Add: 6F building 2, NO.48, Donghou road, , Xinhui District, Jiangmen China

Installation

Install requirements

A-gap above the fitting 25mm

B-gap to the building material 25mm

C-gap to the thermal insulation 25mm

6. Make sure the downlight fixed tightly in ceiling, turn on the power.

1. Open a hole according to the cutout size of led downlight.

2. Open the junction box cover, see Figure 1. (Model dependent):

Figure 1

3. Put the main AC wire through line pressing clip, feed the L.N to the fast connection terminal block respectively then compress the line pressing clip.

4. Close the junction box cover tightly,then put junction box

5. Hold back spring clips then push downlight into the hole.

Blue

BrownL =

N =

and driver into the hole.