team 3 prototype plans for team 5
DESCRIPTION
Prototype instruction produced by Team 3 from Loughborough for the Team 3 in ViennaTRANSCRIPT
Team Conker - AUSTRIAN CREATURES MASKNovember 2013
1 © James Green, Jagrut Mistry & Chris Sargent
1
2
34
5
6
7
8
The Austrian creatures mask is a culmination of the Perchta, Cuelebre and The Krampus. The mask is made from laser cut card with printed graphics.
There are two interchangeable features, the horns (7) and the tongue (8), both these parts have example graphics included. However the emphasis of a blank canvas should encourage a child’s creativity to create their own features.
The following pages lists the features numbered
Required:x3 A4 Card (at least 150gsm)x1 300mm length stringGlue Stick
7 8
DESCRIPTION
OVERVIEW
Team Conker - AUSTRIAN CREATURES MASK MASK GUIDE
String to be tied and placed here
November 2013
2 © James Green, Jagrut Mistry & Chris Sargent
1
2
3
5
6
4Brow
Left eye
Right eyeLeft frame
Right frame
Nose
HORN GUIDE
HORNSInterchangeable horns are included, within this is a set of x2 blank and patterned surfaces. These parts slot into the brow
slot into brow
Team Conker - AUSTRIAN CREATURES MASKNovember 2013
3 © James Green, Jagrut Mistry & Chris Sargent
7
1
Team Conker - AUSTRIAN CREATURES MASKNovember 2013
4 © James Green, Jagrut Mistry & Chris Sargent
TONGUE GUIDE
8 TONGUESInterchangeable tongues feature different shapes and colours. This also includes a blank template for customising. This attaches at two point through the nose 4
slots into nose
Team Conker - AUSTRIAN CREATURES MASKNovember 2013
5 © James Green, Jagrut Mistry & Chris Sargent
SCENARIO
Ideally the mask would be given away for free, where the end product is low cost and low tech but is effective in
promoting the various folklores
PROTOTYPE PLANS
The following pages are provided as .ai and .DXF files.The graphics should be printed first and then laser cut using
the .DXF file to create a ‘tear away’ feature for each part
6 © James Green, Jagrut Mistry & Chris Sargent
MASK NETTo assemble the mask cut along the solid linesFold along the dashed lines and connect each piece with glue
Cut out shapes or draw on the blank canvas to create your own mask!
Scale 1:1
HORN NETTo assemble the mask cut along the solid linesFold along the dashed lines and connect each piece with glue
The bottom flap connects to the mask
Scale 1:1
TONGUE NETTo assemble the mask cut along the solid linesFold along the dashed lines and connect each piece with glue
The top section connects into the slots in the nose to create a tongue and tusks
90° Fold
90° Fold
Scale 1:1