te iml - vitopel€¦ · • surface treatment on outer surface for printing and lamination. •...
TRANSCRIPT
Main Characteristics
Typical Values
Applications / Recommendations
Notes
• Good optical properties.
• Surface treatment on outer surface for printing
and lamination.
• Film with low static load dissipation, acting as
"non-conductor" in the structure.
• Suitable for UV letterpress printing.
• Easy recycling, with possible recycling with PP
and PEAD bottles.
• In Mold labels for injected containers.
• Requires lamination with films with good
antistatic properties.
• Minimum humidity control of 50%, temperature
of 23-30Cº. It is important to store this product
under these conditions for 24 hours before use.
• Use of destaticizing bars in the printing,
lamination and cutting processes.
BOPP Film, transparent, surface
treatment on outer surface for printing
and lamination.
1 – Abbreviations used: DM – direction of equipment; DT – direction cross-sectional to equipment; NT - non-treated surface.2 – The values described in the table above are not the product specification, but represent the average or typical values for this product.3 – The films mentioned are treated on the external surface. Films with treatment on the internal surface (I) can be supplied through prior consultation with the Commercial sector.
The technical information in this publication is based on our experience and is general in nature. The information provided herein must not be considered or interpreted as guarantee ofsuitability of the product specified for a purpose or intended use by someone who becomes aware of the said information, except when expressed otherwise by us.
Treated layer
PP Core
Non-treated layer
TE_IML
Review August/16Review August/16