8/10/2019 TaTaurus TSMD3215 Operating Instruction.pdfurus TSMD3215 Operating Instruction

1/7

8/10/2019 TaTaurus TSMD3215 Operating Instruction.pdfurus TSMD3215 Operating Instruction

2/7

SAFETY INSTRUCTWARNINGWhen using electric tools, basic safety precautions should a

to reduce the risk of fire, electric shock and personal injury.

is not intended for use by young children or infirm persons

been adequately supervised by a responsible person to ens

use the appliance safely. Young children should be supervisthey do not play with the appliance.

SAFETY FIRSTRead all instructions thoroughly and learn the appliances opera

potential hazards of this tool before attempting to operate it

8/10/2019 TaTaurus TSMD3215 Operating Instruction.pdfurus TSMD3215 Operating Instruction

3/7

5. Maintain tools with care Keep tools sharp and clean for better and safer performance.

Inspect tool cords periodically and if damaged have them re

by an authorised service facility.

6. Stay alert and watch what you are doing Use common sense. Do not operate tool when you are tired.

7. Check damaged parts Before further use of the tool, a guard or other part that is

d d h ld b f ll h k d d i h i

8/10/2019 TaTaurus TSMD3215 Operating Instruction.pdfurus TSMD3215 Operating Instruction

4/7

Precautions on using bench grindersThe grinder is for light duty home use and is particularly useful

garden tools and drills.

Maximum continuous operating time 20 minutes.

Disconnect power supply plug before replacing wheels or cove

Always use guards and eye shields.

Use grinding wheels suitable for the speed of the grinder.

Ensure grinding wheels rotate freely before switching on the po

Do not operate the grinder with the wheel guard off

8/10/2019 TaTaurus TSMD3215 Operating Instruction.pdfurus TSMD3215 Operating Instruction

5/7

AssemblyAssemble the eye shield, spark breakers and tool rests using the

Be sure to position both the tool rests and spark breakers no mo

from the edge of the grinding wheel.

It is advisable to secure the edge of the grinder to the workbenc

The grinder should always be mounted on a clean, firm surface

and should not be used unless bolted down.

The tool rest must be assembled so the wheel rotates freely, but

more than 2 mm between the rest and the wheel.

8/10/2019 TaTaurus TSMD3215 Operating Instruction.pdfurus TSMD3215 Operating Instruction

6/7

8/10/2019 TaTaurus TSMD3215 Operating Instruction.pdfurus TSMD3215 Operating Instruction

7/7

1 1