WWW.REINHAUSEN.COM

TAPMOTION® ED ISM®

TRIED AND TESTED DRIVE.INTEGRATED MONITORING.

2

TAPMOTION® ED ISM®.THE INTELLIGENT DRIVE.

TAPMOTION® ED ISM®

3

Capture, evaluate, store, and visualize transformer data and drive the on-load tap-changer. TAPMOTION® ED ISM®. Integrated intelligence.

As well as driving the on-load tap-chan-ger, the TAPMOTION® ED ISM® enables all relevant power transformer operating data to be captured and evaluated: For example, tap changer monitoring or evaluations of transformer load. TAPMOTION® ED ISM® helps to purpose-fully plan operation and maintenance. The sturdy housing protects both the tap changer‘s motor-drive unit and the integrated monitoring system. The TAPMOTION® ED ISM® is ideally suited to upgrading monitoring of older and smaller transformers.

Automation solutions such as voltage regulation and cooling control are option- ally available with the TAPMOTION® ED ISM® and can be used as complement for transformer control.

Be on the safe side when operating on-load tap-changers and transformers. With a robust drive and integrated expert knowledge. The increasing meshing of networks and the need for greater availability and reliability from the equipment make continuous condition monitoring and evaluation indis-pensable. The TAPMOTION® ED ISM® motor-drive unit is a practical way of simplifying operational control and asset management.

We would be happy to advise and help develop solutions tailored to your needs. Of course, we can also undertake com-missioning on site if requested.

Minimum wiring, maximum flexibility.

The intelligent TAPMOTION® ED ISM® motor-drive unit is delivered from the factory with our ISM® technology. This is particularly well suited to the special conditions of energy technology. Commissioning is quick and easy as the transformer sensors can be connected and configured with ease. In addition to the superior monitoring functions, you also benefit from the freely assignable in- and outputs, enabling you to design your transformer monitoring as you wish.

The data captured and evaluated can be transferred directly to the control system. This greatly reduces the amount of wiring needed during installation andsignificantly cuts costs compared with the conventional connection method. An integrated web server with ISM® Intuitive Control Interface (IICI) displaysthe data so there is no need for the time-consuming process of installing software packages.

4

TAPMOTION® ED ISM®

4

5

State-of-the-art automation solutions are combined with tried and tested MR drive technology in the TAPMOTION® ED ISM®. With more than 100,000 drives sold since it was launched in 1997, the TAPMOTION® ED is synonymous with safety, reliability, and robustness. Proven components, modular design, and our ISM® automation platform, tailored exclusively to the needs of energy technology, guarantee MR's superior quality for years to come.

RELIABILITY MEETS AUTOMATION.

TAPMOTION® ED

I Robust and resistant housing made from cast aluminum (protection class IP66) guarantees a very long life

I Flexible assembly thanks to variable rail systemI Modular structure provides huge scope for individualizationI Standard fastening and output geometryI Quiet transmission gear with zero-maintenance belt-type

gear as the transmission elementI Terminals arranged to suit customer for simple electrical

connection using user-friendly terminal technologyI Status indicators (red, amber, green) in motor-drive unit’s

viewing window

ISM® technology (Integrated Smart Module)

I Integration of monitoring function in the TAPMOTION® ED motor-drive unit with tested and ready-to-connect solution

I Modular and efficient hardware design particularly suited to substation requirements I 28 or 42* digital inputsI 15 or 20* digital outputs I 4 or 8* analog inputsI Voltage measurement 1 ph. or 3 ph.*I Current measurement 1 ph. or 3 ph.*I 32 bit CPU with various communication interfaces

*optional

Take advantage of our additional packages and integrate additional functions such as voltage regulation into your TAPMOTION® ED ISM®. The easy-to-connect sensors allow all the key operating data from a power transformer to be recorded, processed, and made available via integrated web visualization.

FOR EVERYONE WHO LIKES TO CONCENTRATE ON THE ESSENTIALS.

TAPMOTION® ED ISM®

6

Transformer monitoring

I System voltage, load current, frequency, load factor, effective, reactive and apparent power

I Temperature monitoringI Aging rate and lifetime consumptionI Monitoring motor-drive (e.g. motor run, motor protection switch, door contact)I Monitoring protection devices (e.g. Buchholz relays, RS 2001, pressure relief devices)I Oil level conservator

Cooling control*

I Control of 2, 4 or 6 cooling stagesI Intelligent activation of cooling stagesI Individual settings of single cooling stagesI Cyclic and load-dependent cooling stage

activationI Predictive activation of cooling stages fail-safe-functionalityI Monitoring of cooling stages*

DGA*

I Online monitoring of up to 9 preconfigured gases, relative oil moisture and relative total gas content

I Monitoring of limit values according to IEC 60599

7

Voltage regulation*

I Linear and integral control algorithm I Up to 3 different desired voltage levelsI Individual delay time settingsI Line drop compensation (RX or Z-compensation)I 1 ph. or 3 ph. voltage measurementI Integrated paralleling control (up to 16 transformers,

Master/Follower or min. circulation current)

Free configurable in- and outputs

Free digital and analog inputs/outputs can be configured individually

SCADA communication*

I IEC 61850 ED 1 and ED 2I IEC 60870-5-101; 103; 104I DNP 3I Modbus TCP, RTU, ASCIII Redundancy protocols RSTP, PRP, HSR

OILTAP®*

I Maintenance recommenda-tions and operator intervalls

I Tap positionI Switching statistics OLTC

(switching number per tap, operation time per tap)

I Oil temperature OLTCI Oil level OLTCI Contact wear OILTAP®

I Soothing

VACUTAP®

I Maintenance recommen-dations and operator intervalls

I Tap positionI Tap-change statistics

of OLTC (number of tap-change operations per

tap, time per tap)I Oil temperature OLTCI Oil level OLTC

OLTC monitoring

*optional

8

TAPMOTION® ED ISM®

With ISM® technology, MR has created a pioneering and standardized basis,covering all aspects of substation automation.

Software

I Robust operating system as the basis for all system and application functions

I Database of current and historical operating data as well as status and log information

I Web-based visualization in accordance with HTML 5 standard with SVG (Scalable Vector Graphics)

I All necessary SCADA protocols are available in client or server functionality

Hardware

I Modular and efficient hardware design I Integrated, flexible functionsI Specific modules for various tasks, such as

measurement or communicationI Supports all common interface standardsI 19" design or housing for installation on cap rail

in a control cabinet or in motor-drive unitsI Optional operator panel for visualization

ISM® technology is the standardized hardware and software basis that is being used for all MR automa-tion solutions.

The hardware components and the universal soft-ware architecture are distinguished by their user-friendliness and flexibility. The system is, of course, designed to meet the special requirements of energy technology with regard to reliability, robustness, and durability. ISM® technology is also open and flexible, supporting both the use of standard products as well as the integration of individual requirements in transformer substation automation. Regardless of the application, users benefit from standardized components, tools, and operating interfaces – in short: the ISM® Intuitive Control Interface (IICI)).

FUTURE-PROOFED. THE NEW ISM® TECHNOLOGY.

9

Simple and cost efficient retrofitting:Photo 1 The action: The ISM® is installed by our expertsPhoto 2 The result: Fit for the future – thanks to additional intelligence in the existing motor-drive unit

Customized systems are available for more demanding customers

On request, our experts will develop solutions mat-ched perfectly to your needs. For power transmission and power distribution systems, we offer customized systems for the areas of data management, link to SCADA, control and regulation, equipment automa-tion, and monitoring of energy supply components. Benefit from our decades of experience in on-load tap-changer regulation and monitoring.

Our all-around service includes:I Appraisal I AdviceI Development of a solutionI EngineeringI Implementation and commissioningI Training

Designed with future requirements in mind

ISM® is also available as a retrofit model for all TAP-MOTION® ED motor-drive units that have previously been delivered.

Your TAPMOTION® motor-drive unit is easy to equip with additional intelligence in just a few hours, allowing it to meet your individual requirements. As an option, we can also deliver the ISM® in a separate stainless-steel cabinet.

We are always at your side. Our experts offer a complete service and will develop customized solutions on request.

ALWAYS IN THE BEST HANDS.

TAPMOTION® ED ISM®

10

Motor-drive unit TAPMOTION® ED ISM®

Avaliable OLTC types VACUTAP® , OILTAP® , DEETAP®

Power consumption motor 0.75 kW**

Supply voltage motor circuit 3 AC/230 V/400 V

Frequency 50 Hz/60 Hz*

Operation time drive shaft per switching cycle ca. 5.4 s**

Maximum tap positions 35**

Supply voltage control and heating circuit AC 230 V**

Ambient temperature –25°C ... +50°C

Protection degree IP 66 according to DIN EN 60529

Isolation test voltage 2 kV/60 s

Weight ED100/200S ca. 80 kgED100/200L ca. 130 kg

Standards IEC 60214 (2014)

ISM® technology

Measurements 3 phase U/I measurement (motor current)*1 phase U/I measurement (transformer)3 phase U/I measurement (transformer)*

Digital inputs/outputs Galvanic isolated groups of inputs; signal voltage level 18-265 V AC/DCPotential free relay contacts; signal voltage level up to 265 V AC/DC

Analog inputs/outputs Galvanic isolated inputs 0..4..20 mA, 0..10 V DC, PT100Galvanic isolated outputs 0..4..20 mA, 0..10 V DC

Communication interfaces

EthernetRJ45 for SCADA communicationRJ45 for remote visualization*RJ45 for HMI connection*FO 1310 nm single port*FO 1310 nm dual port, redundancy protocols RSTP; PRP; HSR*

SerialRS 232/422/485 for SCADA communicationFO FST or FSMA connectorWave lenght 660 nm or 850 nm*

Standards IEC 61010-1, IEC 61010-2-030, IEC 61000-6-2/-4, IEC 60255-21-1/-2/-3 Class 1

Monitoring functions

Transformer monitoring Standard

OLTC monitoring Standard

Voltage regulation Optional

Cooling control Optional

DGA monitoring Optional

TECHNICAL DATATAPMOTION® ED ISM®.

* optional** standard design, further options on demand

MORE POWER, MORE VALUE.

11

Be on the safe side when operating on-load tap-changers. With our expert knowledge and TAPMOTION® ED ISM®.

Maintenance-free and long-lasting

I With more than 100,000 drives sold since it was launched in 1997, the TAPMOTION® ED guarantees proven components and superior MR quality

I Robust and resistant housing made from cast aluminum, guarantees a very long lifeI ISM® automation platform, tailored exclusively to the needs of energy technology, off ers ultimate

security and reliability

Reliable transformer monitoring

I Capturing, saving, and evaluating the necessary values related to every aspect of a transformer makes condition-based maintenance possible

I Direct transmission of information to the control system or fl eet management system (by bus) reduces the amount of wiring needed

Functionally integrated drive with modular automation solutions

I Modular and economic system, making ideal adaptation to all requirements possibleI Can be installed on any power transformer (no extra sensors needed)I Complex and individual automation and monitoring tasks possibleI Integration of function (monitoring, voltage regulation and intelligent cooling control)

in the TAPMOTION® ED motor-drive unit with tested and ready-to-connect solution

Simple operation and state-of-the-art graphic display

I Intuitive user interface with simple operating conceptI Software does not have to be installed thanks to web-based visualization I Interface for remote access included as standardI Optionally available touch displays are easy to connect

Additional services

I Undertaking of commissioningI Undertaking of and assistance with factory/site acceptance tests (FAT/SAT)I System modernization – including system advice and wiring adjustmentsI General product trainingI Technical training at the Regensburg training center or at local MR subsidiariesI On-site hands-on training I Certifi cation support for systemsMeine

Idee für Reinhausen

MIRMeine Idee für Reinhausen

ISMTechnology

®

Maschinenfabrik Reinhausen GmbHFalkensteinstrasse 893059 Regensburg, Germany

Phone: +49 941 4090-0Fax: +49 941 4090-7001E-mail: info@reinhausen.com

www.reinhausen.com

Please note:

The data in our publications may differ from

the data of the devices delivered. We reserve

the right to make changes without notice.

IN4182044/02 EN – TAPMOTION® ED ISM® –

F0327302 – 11/16 – uw –

©Maschinenfabrik Reinhausen GmbH 2015