tango hp-1 rotating nozzle - hydroblast.co.uk · hydroblast ltd using a tango nozzle. it is quickly...
TRANSCRIPT
Tango HP-1 Rotating NozzleLow maintenance, extremely durable, lightweight and versatile.
+44 1677 [email protected]
www.hydroblast.co.uk
Contact us for a competitive price today!
+44 1677 [email protected]
Description
There is a large range of inserts available to suit all needs, contact us today to discuss your requirements all for a competitive price.
The patented HP sealing system is extremely durable and low maintenance. Completely made of stainless steel. Compact design. Easy to handle. The unbeatable double-sided bearing of the rotary shaft, both radial and axial, provides perfect and best possible robustness for operation in harsh environments. The outer dimensions are only Ø40x180mm. Due to the symmetrical arrangement of the nozzles there is no imbalance and therefore no vibrations, thus reducing wear and noise levels. Due to the needle system much fewer components are needed, thus increasing the life span and reducing the maintenance of the rotor nozzle to a minimum. The Tango rotary nozzle is the perfect tool for surface treatment. It can be used with all approved high pressure, ultra high pressure fittings and mounted on lances making it very versatile.
For safety reasons, manual adjustment of the brake was deliberately omitted. Possible injuries by the operator are thus eliminated. The braking effect is designed and calculated in such a way that as the pressure increases, the rotation levels off up to 4000 rpm.
Two Nozzle Sizes Available (Inserts Sold Separately):Part Number DescriptionTANGO-1 (M26x1.5) Tango UHP 9/16"-18 UNF 3000 BAR 4 JetsTANGO-2 (M26x1.5) Tango UHP M14x1.5LH 3000 BAR 4 Jets
Advantages and Characteristics
• Extremely durable• Low maintenance• Completely made of stainless steel• Compact design• Easy to handle, no vibrations• Optimal bilateral bearing radial as well as axial• Designed for operation in harsh environments
The rotating nozzle with the unique patented seal!
+44 1677 [email protected]
Technical DataOperating pressure (bar) max. 3000Operating temp. (°C) max. 100Tightening torque (Nm) max. 75Flow rate max. 75Nozzle Ø (mm) mvt 964Total weight (Kg) 1.2
• Surface cleaning• Cleaning and removing flash from castings• Offshore deployment• Concrete restoration and removal• Removal of surface coatings• Removal of bitumen layers• Paint removal
Applications
Here are some before and after images from a paint removal project completed by Hydroblast Ltd using a Tango nozzle. It is quickly becoming one of our top rated
pieces of equipment for it's efficiency and ease of use.
When manually operating high pressure guns and lances the repulsive force on the axis should not exceed 250N!
+44 1677 [email protected]
+44 1677 [email protected]
Hydroblast and Hydroblast Cleaning Solutions are trading names of Hydroblast Limited.
Registered Office: Old Hall Farm, Gatenby, Northallerton, North Yorkshire, DL7 9PG.Registered in England No. 05002219
Copyright 2020 Hydroblast Limited