tally on server-instructions

7/31/2019 Tally on Server-Instructions

1/10

1. Installing Tally.ERP 9 on the Server

Step 1: Double click on the Install.exe to execute the installer.

Step 2: Click the button "Next" to continue the Installation.

Step 3: In Tally.ERP 9 Setup screen, in the field that reads "application directory", you can specify

where you would like to have Tally.ERP 9 application files. By default, Tally will select C drive; if you

want to change from C drive to D, you can do so. Once you specify the Tally.ERP 9 folder path, click

"Next".


2/10

Step 4: Click on "Install".

Step 5: You will get the message "Tally.ERP 9 Installed Successfully". Click the button "Continue" to

install "license Server".


3/10

Note: License Server is used for ensuring that workstations connected in the network are able to

work on Tally.ERP 9.

Step 6: For installing License server ensure that "License Server" radio button is selected and click

the button "Next" and Install.


4/10

You will get the message, Tally License server 4.0 Installed successfully. You can click on Finish to

close the Wizard.

2. Activation of License

Step 1: Start Tally.ERP 9 -> Click on Activate License.

Step 2: Click on Activation of Promotional rental license.


5/10

a) Click on activation in single user mode if you are deploying this on a desktop.

b) if you want to deploy a multi-user, please select "Option (1) Install and Start License Server in

this system".

Step 3: Enter the promotional code provided to you as in the screen below (Eg:

[email protected]) and then enter your email ID and press ENTER.


6/10

Step 4: You will get the below screen and then press ENTER.

Step 5: Click on Unlock license.


7/10

Step 6: Check your mailbox you will receive the Unlock key.

Type or copy and paste (Ctrl+Alt+V) the Unlock Key and then press ENTER, and get started with

Tally.ERP 9.


8/10

Press Enter button and you will get the message "Congratulation, Tally.ERP 9 Activated

Successfully".

3. Configuring the workstations to work on Tally.ERP 9

Step 1: One can either copy the downloaded Tally.ERP 9 installer (Setup.exe) or map the folder on

the server where the Setup.exe is located.

Double click on the Install.exe to execute the installer file.

Step 2: Click "Next" to continue the Installation.


9/10

Step 3: Click on the radio button on the label that reads as "Use License Server". Here you need to

specify your Server name or server IP address and click on "Next".

Note: By default Port number will be 9999. You have the flexibility of changing the port number from

9999 to 65000.

Step 4: Click on "Install".


10/10

Step 5: Click on Finish. Now you are all set to start using Tally.ERP 9. Repeat the same step on other

workstations from which you would like to use Tally.ERP 9.

tally on server-instructions

Documents