tacticall tetra interface - saab solutions · pdf filetetra interface available on all...
TRANSCRIPT
TETRA INTERFACE
AVAILABLE ON ALL TACTICALL CLIENTS
INCREASED CAPACITY
APPLICATION
PLATFORM
KEY STRENGTH
TactiCall TETRA setup
TactiCall TETRA enables operators to handle critical communications over an IP LAN/WAN network infrastructure directly from the TactiCall interface.
Operators can manage single or multiple talk groups, patching, selecting and deselecting talk groups through the same interface and rapidly connect to users in the field. All depending on operational requirements on a case to case basis.
TETRA can be integrated in two ways. Either using the standard TETRA terminal interface or a direct line interface to the TETRA switch.
TETRA TERMNIAL INTERFACE:
TactiCall TETRA integration using the standardised TETRA Peripheral Equip-ment Interface (PEI) and TETRA terminals for an “over the air” interface.
Using the PEI interface does not require expensive infrastructure line connectivity.
This standard interface solution is independent of the TETRA infrastructure provider. Furthermore, the “over the air” TETRA integration is ideal for mobile and deployable TactiCall sites.
TETRA LINE INTERFACE:
The advanced TactiCall integration, using the TETRA provider’s proprietary line inter-face for high capacity TETRA operations and increased management functionality.
Using a direct line to the TETRA switch reduces the burden on the air interface and facilitates communication on multiple talk groups simultaneously.
TACTICALL TETRA INTERFACE
TactiCall operator control panel
TactiCall TETRA gateway service
Line interfaceLAN / WANnetwork
www.saabgroup.com Saab Danmark A/S
Alsion 2
DK-6400 Sønderborg
Denmark
Tel +45 3638 3000
Specifications subject to change without notice
TactiCall Operator Control Panel
TactiCall IPG 3000
PEI interface TETRA terminal
PEI interface
COMMUNICATION CAPABILITIES TETRA LINE INTERFACETETRA TERMINAL INTERFACE
• Supported TETRA infrastructure systems
• TETRA voice communication
• Call handling
• Group management
• SDS messaging
• TactiCall gateway service
• TactiCall clients
Rohill TetraNode, DAMM TetraFlex, other interfaces subject to development
Group call, Individual (private) call and priority call. Simultane-ously talk and listen on multiple talk groups (only limited by the TETRA infrastructure configuration)
Call selection (simplex, duplex, direct), group patching, patching with for instance VHF/UHF radios and telephony, call history, instant voice recording & replay
Dynamic regrouping (DGNA), add and delete groups, as-sign and remove members, multi-level radio user directories
Text messaging, status messaging and call back messag-ing for individual and group calls
Multiple talkgroups can be connected to TactiCall nets. This allows the talkgroups to be shared and operated by an unlimited number of TactiCall operators
Featuring integrated operation of all your commu-nications: TETRA, conventional VHF/UHF radios, telephony, intercom, public address and CCTV
All TETRA infrastructure providers are supported
Group call, Individual call, Priority call, Talkgroup selection and talkgroup scanning. Virtually an unlimited number of TETRA PEI radios can be connected to TactiCall.
Call ID display, call selection (simplex, duplex, direct), direct and trunked mode, group patching, patching with for instance VHF/UHF radios and telephony, call history, instant voice recording & replay
N/A
Text messaging, status messaging and call back messag-ing for individual and group calls
One talkgroup per PEI radio interface can be connected to a TactiCall net. This allows the talkgroup to be shared and operated by an unlimited number of TactiCall operators
Featuring integrated operation of all your commu-nications: TETRA, conventional VHF/UHF radios, telephony, intercom, public address and CCTV
TETRA terminal
TETRA switch
LAN / WANnetwork
TETRA LINE INTERFACE - ARCHITECTURE
TETRA TERMINAL INTERFACE - ARCHITECTURE
Tact
iCal
l TE
TRA
– E
nglis
h –
ID 3
550
Ref
. 1