tables for en 10216-2

01-632

SEAMLESS STEEL TUBES FOR PRESSURE PURPOSES

Part 2: Technical delivery conditions for non-alloy and alloy steel tubeswith specified elevated temperature properties

SA/EN 10216-2

(Identical with EN 10216-2:2002 +A2:2007 with the additional requirements listed on this cover sheet.)

1. Additional Requirements

1.1 MarkingIn addition to the marking requirements of this

specification, all products required to be marked andmaterial identification used on all documentationrequired by this specification are to be identified bythis SA/EN specification designation.

2. National Parts

2.1 The National Foreword and the NationalAnnexes, if any, do not apply for SA/EN 10216-2.

3. Source

3.1 See Nonmandatory Appendix A forordering information to obtain an English languagecopy of EN 10216-2 +A2 and its references

BC01-632 US Customary

Title: ASME Electronic Stress Tables, 2007 US Customary

Table: Table 1A - Maximum Allowable Stress Values S for Ferrous Materials

Page

No.

Line

No.

Nominal

CompositionProduct Form Spec. No. Type/ Grade

Alloy

Desig./

UNS

No.

Class

/

Cond

./

Temp

er

Size/ Thickness

(in)P-No.

Group

No.

Min.

Tensile

Strength

(ksi)

Min.

Yield

Strength

(ksi)

Applic.

and Max.

Temp.

Limit- I

(°F)

Applic.

and Max.

Temp.

Limit- III

(°F)

Applic.

and Max.

Temp.

Limit- VIII-

1 (°F)

10 5 Carbon steel Smls. & wld. tubeSA-334 1 K03008 1 1 55 30 NP 700 650

Insert------> Carbon steel Smls. tube SA/EN 10216-2 P235GH 1 5/8<t≤2 1/2 1 1 52 31 1000 NP 1000

Insert------> Carbon steel Smls. tube SA/EN 10216-2 P235GH 5/8<t≤1 5/8 1 1 52 32.5 1000 NP 1000

Insert------> Carbon steel Smls. tube SA/EN 10216-2 P235GH t≤ 5/8 1 1 52 34 1000 NP 1000

14 23 Carbon steel Smls. tube SA-210 A-1 K02707 1 1 60 37 1000 700 1000

Insert------> Carbon steel Smls. tube SA/EN 10216-2 P265GH 1 5/8<t≤2 1/2 1 1 59.5 35.5 1000 NP 1000

Insert------> Carbon steel Smls. tube SA/EN 10216-2 P265GH 5/8<t≤1 5/8 1 1 59.5 37 1000 NP 1000

Insert------> Carbon steel Smls. tube SA/EN 10216-2 P265GH t≤ 5/8 1 1 59.5 38.5 1000 NP 1000

Insert------> C-0.3Mo Smls. tube SA/EN 10216-2 16Mo3 1 5/8<t≤2 1/2 3 1 65.5 37.5 1000 NP 1000

Insert------> C-0.3Mo Smls. tube SA/EN 10216-2 16Mo3 5/8<t≤1 5/8 3 1 65.5 39 1000 NP 1000

Insert------> C-0.3Mo Smls. tube SA/EN 10216-2 16Mo3 t≤ 5/8 3 1 65.5 40.5 1000 NP 1000

26 22 C-0.5Mo Plate SA-204 A K11820 3 1 65 37 1000 700 1000

30 34 1Cr-1/2Mo Plate SA-387 12 K11757 2 4 1 65 40 1200 700 1200

Insert------> 1Cr-1/2Mo Smls. tube SA/EN 10216-2 13CrMo4-5 1 5/8<t≤2 1/2 4 1 64 40.5 1200 NP 1200

Insert------> 1Cr-1/2Mo Smls. tube SA/EN 10216-2 13CrMo4-5 t≤1 5/8 4 1 64 42 1200 NP 1200

34 36 2.25Cr-1Mo Forgings SA-182 F22 K21590 3 5A 1 75 45 1200 700 1200

Insert------> 2.25Cr-1Mo Smls. tube SA/EN 10216-2 10CrMo9-10 1 5/8<t≤2 1/2 5A 1 69.5 39 1200 NP 1200

Insert------> 2.25Cr-1Mo Smls. tube SA/EN 10216-2 10CrMo9-10 t≤1 5/8 5A 1 69.5 40.5 1200 NP 1200

Page 1 - Table 1A - US 04/11/2010




Nominal


Carbon steel Smls. & wld. tubeSA-334 1

Carbon steel Smls. tube SA/EN 10216-2 P235GH



Carbon steel Smls. tube SA-210 A-1




C-0.3Mo Smls. tube SA/EN 10216-2 16Mo3



C-0.5Mo Plate SA-204 A

1Cr-1/2Mo Plate SA-387 12

1Cr-1/2Mo Smls. tube SA/EN 10216-2 13CrMo4-5


2.25Cr-1Mo Forgings SA-182 F22

2.25Cr-1Mo Smls. tube SA/EN 10216-2 10CrMo9-10


Applic.

and Max.

Temp.

Limit- XII

(°F)

External

Pressure

Chart No.

Notes-20-100°F

(ksi)

<=200°F

(ksi)

<=300°F

(ksi)

<=400°F

(ksi)

<=500°F

(ksi)

<=600°F

(ksi)

650 CS-2 W12, W14 15.7 15.7 15.7 15.7 15.7 15.3

NP CS-2 G10, S1, T2, W14 14.9 14.9 14.9 14.9 14.9 14.9

NP CS-2 G10, S1, T2, W14 14.9 14.9 14.9 14.9 14.9 14.9

NP CS-2 G10, S1, T2, W14 14.9 14.9 14.9 14.9 14.9 14.9

650 CS-2 G10, S1, T1 17.1 17.1 17.1 17.1 17.1 17.1

NP CS-2 G10, S1, T2 17.0 17.0 17.0 17.0 17.0 17.0

NP CS-2 G10, S1, T2 17.0 17.0 17.0 17.0 17.0 17.0

NP CS-2 G10, S1, T2 17.0 17.0 17.0 17.0 17.0 17.0

NP CS-2 G11, S2, T4 18.6 18.6 18.6 18.6 18.6 18.6

NP CS-2 G11, S2, T4 18.6 18.6 18.6 18.6 18.6 18.6

NP CS-2 G11, S2, T4 18.6 18.6 18.6 18.6 18.6 18.6

650 CS-2 G11, S3, T4 18.6 18.6 18.6 18.6 18.6 18.6

NP CS-2 S4, T5 18.6 18.2 17.9 17.9 17.9 17.9

NP CS-2 T5 18.2 18.2 18.2 18.2 18.2 18.2

NP CS-2 T5 18.2 18.2 18.2 18.2 18.2 18.2

NP CS-2 S4, T4, W7, W9 21.4 21.4 20.9 20.6 20.5 20.4

NP CS-2 T4, W7, W9 19.9 19.9 19.4 19.2 19.1 18.9

NP CS-2 T4, W7, W9 19.9 19.9 19.4 19.2 19.1 18.9

Page 2 - Table 1A - US 04/11/2010




Nominal




















<=650°F

(ksi)

<=700°F

(ksi)

<=750°F

(ksi)

<=800°F

(ksi)

<=850°F

(ksi)

<=900°F

(ksi)

<=950°

F (ksi)

<=1000

°F (ksi)

<=1050

°F (ksi)

<=1100

°F (ksi)

<=1150

°F (ksi)

<=1200

°F (ksi)

14.8 14.3

14.9 14.9 13.0 10.8 8.7 5.9 4.0 2.5

14.9 14.9 13.0 10.8 8.7 5.9 4.0 2.5

14.9 14.9 13.0 10.8 8.7 5.9 4.0 2.5

17.1 15.6 13 10.8 8.7 5.9 4.0 2.5

17.0 17.0 13.0 10.8 8.7 5.9 4.0 2.5

17.0 17.0 13.0 10.8 8.7 5.9 4.0 2.5

17.0 17.0 13.0 10.8 8.7 5.9 4.0 2.5

18.6 18.6 18.6 18.6 18.2 13.7 8.2 4.8

18.6 18.6 18.6 18.6 18.2 13.7 8.2 4.8

18.6 18.6 18.6 18.6 18.2 13.7 8.2 4.8

18.6 18.6 18.6 18.4 17.9 13.7 8.2 4.8

17.9 17.9 17.9 17.9 17.9 17.4 11.3 7.2 4.5 2.8

18.2 18.2 18.2 18.2 17.7 17.0 11.3 7.2 4.5 2.8 1.9 1.2

18.2 18.2 18.2 18.2 17.7 17.0 11.3 7.2 4.5 2.8 1.9 1.2

20.2 20.0 19.7 19.3 18.7 15.8 11.4 7.8 5.1 3.2 2.0 1.2

18.8 18.6 18.3 17.9 17.4 15.8 11.4 7.8 5.1 3.2 2.0 1.2

18.8 18.6 18.3 17.9 17.4 15.8 11.4 7.8 5.1 3.2 2.0 1.2

Page 3 - Table 1A - US 04/11/2010



Table: Table U - Tensile Strength Values Su for Ferrous and Nonferrous Materials

Page

No.

Line

No.

Nominal

Composition Product Form Spec No Type/Grade

Alloy

Desig/UNS

No

Class/C

ond/Tem

per

Size/Thicknes

s

Min Tensile

Strength d-20 to 100 d200 d300 d400

486 33 Carbon steel Smls. & wld. tube SA-334 1 K03008 55 55.0 55.0 55.0 55.0

Insert------> Carbon steel Smls. tube SA/EN 10216-2 P235GH 1 5/8<t≤2 1/2 52 52.2 52.2 52.2 52.2

Insert------> Carbon steel Smls. tube SA/EN 10216-2 P235GH 5/8<t≤1 5/8 52 52.2 52.2 52.2 52.2

Insert------> Carbon steel Smls. tube SA/EN 10216-2 P235GH t≤ 5/8 52 52.2 52.2 52.2 52.2

490 2 Carbon steel Smls. tube SA-210 A-1 K02707 60 60.0 60.0 60.0 60.0

Insert------> Carbon steel Smls. tube SA/EN 10216-2 P265GH 1 5/8<t≤2 1/2 59.5 59.5 59.5 59.5 59.5

Insert------> Carbon steel Smls. tube SA/EN 10216-2 P265GH 5/8<t≤1 5/8 59.5 59.5 59.5 59.5 59.5

Insert------> Carbon steel Smls. tube SA/EN 10216-2 P265GH t≤ 5/8 59.5 59.5 59.5 59.5 59.5

Insert------> C-0.3Mo Smls. tube SA/EN 10216-2 16Mo3 1 5/8<t≤2 1/2 65.5 65.3 65.3 65.3 65.3

Insert------> C-0.3Mo Smls. tube SA/EN 10216-2 16Mo3 5/8<t≤1 5/8 65.5 65.3 65.3 65.3 65.3

Insert------> C-0.3Mo Smls. tube SA/EN 10216-2 16Mo3 t≤ 5/8 65.5 65.3 65.3 65.3 65.3

496 9 C-0.5Mo Plate SA-204 A K11820 65 65.0 65.0 65.0 65.0

498 19 1Cr-1/2Mo Plate SA-387 12 K11757 2 65 65.0 65.0 65.0 65.0

Insert------> 1Cr-1/2Mo Smls. tube SA/EN 10216-2 13CrMo4-5 1 5/8<t≤2 1/2 64 63.8 63.8 63.8 63.8

Insert------> 1Cr-1/2Mo Smls. tube SA/EN 10216-2 13CrMo4-5 t≤1 5/8 64 63.8 63.8 63.8 63.8

500 25 2.25Cr-1Mo Forgings SA-182 F22 K21590 3 75 75.0 75.0 73.0 72.2

Insert------> 2.25Cr-1Mo Smls. tube SA/EN 10216-2 10CrMo9-10 1 5/8<t≤2 1/2 69.5 69.6 69.6 67.8 67.1

Insert------> 2.25Cr-1Mo Smls. tube SA/EN 10216-2 10CrMo9-10 t≤1 5/8 69.5 69.6 69.6 67.8 67.1

Page 4 - Table U - US 04/11/2010




Nominal

Composition Product Form Spec No Type/Grade

Carbon steel Smls. & wld. tube SA-334 1


















d500 d600 d650 d700 d750 d800 d850 d900 d950 d1000

55.0 55.0 55.0 55.0 54.3 50.5 46.0 41.1 36.1 31.7

52.2 52.2 52.2 52.2 51.6 48.0 43.7 39.0 34.3 30.1

52.2 52.2 52.2 52.2 51.6 48.0 43.7 39.0 34.3 30.1

52.2 52.2 52.2 52.2 51.6 48.0 43.7 39.0 34.3 30.1

60.0 60.0 60.0 60.0 59.3 55.1 50.2 44.8 39.4 34.6

59.5 59.5 59.5 59.5 58.7 54.6 49.8 44.4 39.0 34.3

59.5 59.5 59.5 59.5 58.7 54.6 49.8 44.4 39.0 34.3

59.5 59.5 59.5 59.5 58.7 54.6 49.8 44.4 39.0 34.3

65.3 65.3 65.3 65.3 65.3 65.3 63.7 60.7 57.0 52.7

65.3 65.3 65.3 65.3 65.3 65.3 63.7 60.7 57.0 52.7

65.3 65.3 65.3 65.3 65.3 65.3 63.7 60.7 57.0 52.7

65.0 65.0 65.0 65.0 65.0 65.0 63.5 60.4 56.8 52.5

65.0 65.0 65.0 65.0 65.0 65.0 63.5 60.4 56.8 52.5

63.8 63.8 63.8 63.8 63.8 63.8 62.0 59.3 55.9 51.9

63.8 63.8 63.8 63.8 63.8 63.8 62.0 59.3 55.9 51.9

71.9 71.4 70.8 70.1 69.0 67.5 65.6 63.0 59.7 55.4

66.7 66.2 65.7 65.0 64.0 62.7 60.9 58.5 55.4 51.5

66.7 66.2 65.7 65.0 64.0 62.7 60.9 58.5 55.4 51.5

Page 5 - Table U - US 04/11/2010



Table Y-1 - Yield Strength Values Sy for Ferrous and Nonferrous Materials

page

_no line_no Nominal Composition Product Form Spec No Type/Grade

Alloy

Desig/UNS

No

Class/

Cond/

Tempe

r

Size/Thicknes

s

Min

Tensile

Strength

Min Yield

Strength Notes d-20 to 100 d150

566 33 Carbon steel Smls. & wld. tube SA-334 1 K03008 55 30 30.0 28.2

Insert------> Carbon steel Smls. tube SA/EN 10216-2 P235GH 1 5/8<t≤2 1/2 52 31 31.2 29.3

Insert------> Carbon steel Smls. tube SA/EN 10216-2 P235GH 5/8<t≤1 5/8 52 32.5 32.6 30.7

Insert------> Carbon steel Smls. tube SA/EN 10216-2 P235GH t≤ 5/8 52 34 34.1 32.0

574 2 Carbon steel Smls. tube SA-210 A-1 K02707 60 37 37.0 34.8

Insert------> Carbon steel Smls. tube SA/EN 10216-2 P265GH 1 5/8<t≤2 1/2 59.5 35.5 35.5 33.4

Insert------> Carbon steel Smls. tube SA/EN 10216-2 P265GH 5/8<t≤1 5/8 59.5 37 37.0 34.8

Insert------> Carbon steel Smls. tube SA/EN 10216-2 P265GH t≤ 5/8 59.5 38.5 38.4 36.1

Insert------> C-0.3Mo Smls. tube SA/EN 10216-2 16Mo3 1 5/8<t≤2 1/2 65.5 37.5 37.7 36.3

Insert------> C-0.3Mo Smls. tube SA/EN 10216-2 16Mo3 5/8<t≤1 5/8 65.5 39 39.2 37.7

Insert------> C-0.3Mo Smls. tube SA/EN 10216-2 16Mo3 t≤ 5/8 65.5 40.5 40.6 39.1

586 37 C-0.5Mo Plate SA-204 A K11820 65 37 37.0 35.6

594 6 1Cr-1/2Mo Plate SA-387 12 K11757 2 65 40 40.0 37.5

Insert------> 1Cr-1/2Mo Smls. tube SA/EN 10216-2 13CrMo4-5 1 5/8<t≤2 1/2 64 40.5 40.6 38.6

Insert------> 1Cr-1/2Mo Smls. tube SA/EN 10216-2 13CrMo4-5 t≤1 5/8 64 42 42.1 40.0

598 11 2.25Cr-1Mo Forgings SA-182 F22 K21590 3 75 45 45.0 42.5

Insert------> 2.25Cr-1Mo Smls. tube SA/EN 10216-2 10CrMo9-10 1 5/8<t≤2 1/2 69.5 39 39.2 37.0

Insert------> 2.25Cr-1Mo Smls. tube SA/EN 10216-2 10CrMo9-10 t≤1 5/8 69.5 40.5 40.6 38.4

Page 6 - Table Y-1 - US 04/11/2010




Nominal Composition Product Form Spec No Type/Grade



















d200 d250 d300 d350 d400 d450 d500 d550 d600

27.5 27.0 26.5 25.6 24.4 23.0

28.6 28.0 27.6 27.1 26.6 26.1 25.4 24.7 23.9

29.9 29.3 28.9 28.4 27.9 27.3 26.6 25.8 25.0

31.2 30.6 30.2 29.7 29.1 28.5 27.8 27.0 26.1

33.9 33.3 32.7 31.6 30.2 28.4

32.6 31.9 31.4 30.9 30.4 29.7 29.0 28.1 27.2

33.9 33.3 32.7 32.2 31.6 30.9 30.1 29.3 28.4

35.2 34.6 34.0 33.5 32.8 32.1 31.3 30.4 29.5

35.4 34.7 34.0 33.4 32.8 32.3 31.8 31.3 30.8

36.8 36.0 35.3 34.7 34.1 33.6 33.1 32.5 32.0

38.2 37.4 36.6 36.0 35.4 34.8 34.3 33.8 33.2

34.8 34.0 33.4 32.2 31.2 30.2

36.2 35.0 34.0 32.5 31.4 30.5

37.5 36.5 35.6 34.9 34.2 33.6 33.0 32.4 31.8

38.8 37.8 36.9 36.1 35.4 34.8 34.2 33.6 33.0

41.2 40.2 39.4 38.1 37.3 36.5

35.9 35.0 34.3 33.7 33.2 32.8 32.4 32.1 31.7

37.2 36.3 35.5 34.9 34.4 34.0 33.6 33.3 32.9

Page 7 - Table Y-1 - US 04/11/2010




Nominal Composition Product Form Spec No Type/Grade



















d650 d700 d750 d800 d850 d900 d950 d1000

22.2 21.5 20.8 20.1 19.5 19.0 18.4 17.8

23.1 22.3 21.6 20.9 20.3 19.7 19.2 18.5

24.2 23.4 22.6 21.9 21.2 20.6 20.0 19.4

25.3 24.4 23.6 22.8 22.2 21.5 20.9 20.3

27.4 26.5 25.6 24.8 24.1 23.4 22.7 22.0

26.3 25.4 24.6 23.8 23.1 22.5 21.8 21.1

27.4 26.5 25.6 24.8 24.1 23.4 22.7 22.0

28.5 27.5 26.6 25.8 25.0 24.3 23.6 22.8

30.3 29.7 29.0 28.2 27.3 26.3 25.1 23.9

31.4 30.8 30.1 29.3 28.3 27.3 26.1 24.8

32.6 31.9 31.2 30.4 29.4 28.3 27.1 25.7

29.7 29.1 28.4 27.7 26.8 25.8 24.7 23.4

30.1 29.6 29.1 28.6 28.0 27.2 26.3 25.3

31.3 30.7 30.0 29.3 28.5 27.6 26.6 25.4

32.4 31.8 31.1 30.3 29.5 28.6 27.5 26.3

36.1 35.6 35.0 34.3 33.5 32.4 31.2 29.7

31.4 30.9 30.4 29.8 29.1 28.2 27.1 25.8

32.5 32.1 31.6 30.9 30.2 29.3 28.2 26.8

Page 8 - Table Y-1 - US 04/11/2010

BC01-632 SI Metric

Title: ASME Electronic Stress Tables, 2006 Metric


Page

No.

Line

No.

Nominal

Composition Product Form Spec. No. Type/ Grade

Alloy

Desig./

UNS

No.

Class/

Cond./

Tempe

r

Size/

Thickness

(mm) P-No.

Group

No.

Min.

Tensile

Strength

(MPa)

Min.

Yield

Strength

(MPa)

Applic.

and Max.

Temp.

Limit- I

(°C)

Applic.

and Max.

Temp.

Limit- III

(°C)

Applic.

and Max.

Temp.

Limit- VIII-

1 (°C)

10 5 Carbon steel Smls. & wld. tube SA-334 1 K03008 1 1 380 205 NP 371 343

Insert------> Carbon steel Smls. tube SA/EN 10216-2 P235GH 40<t≤60 1 1 360 215 538 NP 538


Insert------> Carbon steel Smls. tube SA/EN 10216-2 P235GH t≤16 1 1 360 235 538 NP 538

14 23 Carbon steel Smls. tube SA-210 A-1 K02707 1 1 415 255 538 371 538



Insert------> Carbon steel Smls. tube SA/EN 10216-2 P265GH t≤16 1 1 410 265 538 NP 538

Insert------> C-0.3Mo Smls. tube SA/EN 10216-2 16Mo3 40<t≤60 3 1 450 260 538 NP 538

Insert------> C-0.3Mo Smls. tube SA/EN 10216-2 16Mo3 16<t≤40 3 1 450 270 538 NP 538

Insert------> C-0.3Mo Smls. tube SA/EN 10216-2 16Mo3 t≤16 3 1 450 280 538 NP 538

26 22 C-0.5Mo Plate SA-204 A K11820 3 1 450 255 538 371 538

30 34 1Cr-1/2Mo Plate SA-387 12 K11757 2 4 1 450 275 649 371 649

Insert------> 1Cr-1/2Mo Smls. tube SA/EN 10216-2 13CrMo4-5 40<t≤60 4 1 440 280 649 NP 649

Insert------> 1Cr-1/2Mo Smls. tube SA/EN 10216-2 13CrMo4-5 t≤40 4 1 440 290 649 NP 649

34 36 2.25Cr-1Mo Forgings SA-182 F22 K21590 3 5A 1 515 310 649 371 649

Insert------> 2.25Cr-1Mo Smls. tube SA/EN 10216-2 10CrMo9-10 40<t≤60 5A 1 480 270 649 NP 649

Insert------> 2.25Cr-1Mo Smls. tube SA/EN 10216-2 10CrMo9-10 t≤40 5A 1 480 280 649 NP 649

Page 9 - Table 1A - SI 04/11/2010

BC01-632 SI Metric



Nominal




















Applic.

and Max.

Temp.

Limit- XII

(°C)

External

Pressure

Chart

No. Notes

-30-

40°C

(MPa)

<=65°

C

(MPa)

<=100

°C

(MPa)

<=125

°C

(MPa)

<=150

°C

(MPa)

<=200

°C

(MPa)

<=250

°C

(MPa)

<=300

°C

(MPa)

<=325

°C

(MPa)

<=350

°C

(MPa)

343 CS-2 W12, W14 108 108 108 108 108 108 108 107 104 101

NP CS-2 G10, S1, T2, W14 103 103 103 103 103 103 103 103 103 103

NP CS-2 G10, S1, T2, W14 103 103 103 103 103 103 103 103 103 103

NP CS-2 G10, S1, T2, W14 103 103 103 103 103 103 103 103 103 103

343 CS-2 G10, S1, T1 118 118 118 118 118 118 118 118 118 117

NP CS-2 G10, S1, T2 117 117 117 117 117 117 117 117 117 117

NP CS-2 G10, S1, T2 117 117 117 117 117 117 117 117 117 117

NP CS-2 G10, S1, T2 117 117 117 117 117 117 117 117 117 117

NP CS-2 G11, S2, T4 129 129 129 129 129 129 129 129 129 129

NP CS-2 G11, S2, T4 129 129 129 129 129 129 129 129 129 129

NP CS-2 G11, S2, T4 129 129 129 129 129 129 129 129 129 129

343 CS-2 G11, S3, T4 128 128 128 128 128 128 128 128 128 128

NP CS-2 S4, T5 128 128 125 124 123 123 123 123 123 123

NP CS-2 T5 126 126 126 126 126 126 126 126 126 126

NP CS-2 T5 126 126 126 126 126 126 126 126 126 126

NP CS-2 S4, T4, W7, W9 148 148 147 146 144 142 141 141 140 139

NP CS-2 T4, W7, W9 137 137 137 137 135 133 132 132 132 131

NP CS-2 T4, W7, W9 137 137 137 137 135 133 132 132 132 131

Page 10 - Table 1A - SI 04/11/2010

BC01-632 SI Metric



Nominal




















<=375

°C

(MPa)

<=400

°C

(MPa)

<=425

°C

(MPa)

<=450

°C

(MPa)

<=475

°C

(MPa)

<=500

°C

(MPa)

<=525

°C

(MPa)

<=550

°C

(MPa)

<=575

°C

(MPa)

<=600

°C

(MPa)

<=625

°C

(MPa)

<=650

°C

(MPa)

97.8 89.1 75.4 62.6 45.5 31.6

102 89.1 75.4 62.6 45.5 31.6 21.9 12.7

102 89.1 75.4 62.6 45.5 31.6 21.9 12.7

102 89.1 75.4 62.6 45.5 31.6 21.9 12.7

105 88.9 75.3 62.7 45.5 31.6 21.9 12.7

105 88.9 75.3 62.7 45.5 31.6 21.9 12.7

105 88.9 75.3 62.7 45.5 31.6 21.9 12.7

105 88.9 75.3 62.7 45.5 31.6 21.9 12.7

129 129 129 126 105 68.9 42.8 23.2

129 129 129 126 105 68.9 42.8 23.2

129 129 129 126 105 68.9 42.8 23.2

128 128 127 124 105 68.9 42.8 23.2

123 123 123 123 123 94.4 60.2 40.8 26.3 17.3 11.7 7.40

126 126 126 123 118 94.4 60.2 40.8 26.3 17.3 11.7 7.40

126 126 126 123 118 94.4 60.2 40.8 26.3 17.3 11.7 7.40

138 136 133 130 116 89.4 64.3 44.9 30.1 19.7 12.9 8.06

129 126 123 119 113 89.4 64.3 44.9 30.1 19.7 12.9 8.06

129 126 123 119 113 89.4 64.3 44.9 30.1 19.7 12.9 8.06

Page 11 - Table 1A - SI 04/11/2010

BC01-632 SI Metric



Page

No.

Line

No.

Nominal_Comp

osition Product_Form Spec_No Type_Grade

Alloy_Desig_

UNS_No

Class

_Con

d_Te

mper

Size_Thic

kness

Min_Te

nsile_St

rength 30 to 40 m100 m150 m200 m250 m300 m325

486 33 Carbon steel Smls. & wld. tube SA-334 1 K03008 380 379 379 379 379 379 379 379

Insert------> Carbon steel Smls. tube SA/EN 10216-2 P235GH 40<t≤60 360 360 360 360 360 360 360 360


Insert------> Carbon steel Smls. tube SA/EN 10216-2 P235GH t≤16 360 360 360 360 360 360 360 360

490 2 Carbon steel Smls. tube SA-210 A-1 K02707 415 414 414 414 414 414 414 414



Insert------> Carbon steel Smls. tube SA/EN 10216-2 P265GH t≤16 410 410 410 410 410 410 410 410

Insert------> C-0.3Mo Smls. tube SA/EN 10216-2 16Mo3 40<t≤60 450 450 450 450 450 450 450 450

Insert------> C-0.3Mo Smls. tube SA/EN 10216-2 16Mo3 16<t≤40 450 450 450 450 450 450 450 450

Insert------> C-0.3Mo Smls. tube SA/EN 10216-2 16Mo3 t≤16 450 450 450 450 450 450 450 450

496 9 C-0.5Mo Plate SA-204 A K11820 450 448 448 448 448 448 448 448

498 19 1Cr-0.5Mo Plate SA-387 12 K11757 2 450 448 439 431 431 431 431 431

Insert------> 1Cr-1/2Mo Smls. tube SA/EN 10216-2 13CrMo4-5 40<t≤60 440 440 440 440 440 440 440 440

Insert------> 1Cr-1/2Mo Smls. tube SA/EN 10216-2 13CrMo4-5 t≤40 440 440 440 440 440 440 440 440

500 25 2.25Cr-1Mo Forgings SA-182 F22 K21590 3 515 517 516 503 498 496 494 491

Insert------> 2.25Cr-1Mo Smls. tube SA/EN 10216-2 10CrMo9-10 40<t≤60 480 480 480 473 466 464 462 460

Insert------> 2.25Cr-1Mo Smls. tube SA/EN 10216-2 10CrMo9-10 t≤40 480 480 480 473 466 464 462 460

Page 12 - Table U - SI 04/11/2010

BC01-632 SI Metric



Nominal_Comp














1Cr-0.5Mo Plate SA-387 12






m350 m375 m400 m425 m450 m475 m500 m525

379 379 374 350 322 292 261 232

360 360 355 332 306 277 248 220

360 360 355 332 306 277 248 220

360 360 355 332 306 277 248 220

414 414 408 382 352 319 285 253

410 410 404 379 349 316 282 250

410 410 404 379 349 316 282 250

410 410 404 379 349 316 282 250

450 450 450 450 442 424 403 377

450 450 450 450 442 424 403 377

450 450 450 450 442 424 403 377

448 448 448 448 440 422 401 376

431 431 431 431 431 424 407 385

440 440 440 440 430 414 395 371

440 440 440 440 430 414 395 371

487 482 475 466 455 439 421 396

457 451 443 431 416 396 373 345

457 451 443 431 416 396 373 345

Page 13 - Table U - SI 04/11/2010

BC01-632 SI Metric


Table: Table Y-1 - Yield Strength Values Sy for Ferrous and Nonferrous Materials

page_n

o line_no

Nominal_Comp


Alloy_Desig_

UNS_No

Class_

Cond_

Tempe

r

Size_Thi

ckness

Min_Tens

ile_Streng

th

Min_Yiel

d_Stren

gth Notes m30_40 m65 m100

566 33 Carbon steel Smls. & wld. tubeSA-334 1 K03008 380 205 207 195 189

Insert-----> Carbon steel Smls. tube SA/EN 10216-2 P235GH 40<t≤60 360 215 215 202 196


Insert-----> Carbon steel Smls. tube SA/EN 10216-2 P235GH t≤16 360 235 235 221 214

574 2 Carbon steel Smls. tube SA-210 A-1 K02707 415 255 255 240 233



Insert-----> Carbon steel Smls. tube SA/EN 10216-2 P265GH t≤16 410 265 265 249 242

Insert-----> C-0.3Mo Smls. tube SA/EN 10216-2 16Mo3 40<t≤60 450 260 260 250 243

Insert-----> C-0.3Mo Smls. tube SA/EN 10216-2 16Mo3 16<t≤40 450 270 270 260 252

Insert-----> C-0.3Mo Smls. tube SA/EN 10216-2 16Mo3 t≤16 450 280 280 270 262

586 37 C-0.5Mo Plate SA-204 A K11820 450 255 255 246 239

594 6 1Cr-1/2Mo Plate SA-387 12 K11757 2 450 275 276 259 248

Insert-----> 1Cr-1/2Mo Smls. tube SA/EN 10216-2 13CrMo4-5 40<t≤60 440 280 280 266 257

Insert-----> 1Cr-1/2Mo Smls. tube SA/EN 10216-2 13CrMo4-5 t≤40 440 290 290 276 266

598 11 2.25Cr-1Mo Forgings SA-182 F22 K21590 3 515 310 310 293 282

Insert-----> 2.25Cr-1Mo Smls. tube SA/EN 10216-2 10CrMo9-10 40<t≤60 480 270 270 256 248

Insert-----> 2.25Cr-1Mo Smls. tube SA/EN 10216-2 10CrMo9-10 t≤40 480 280 280 266 258

Page 14 - Table Y-1 - SI 04/11/2010

BC01-632 SI Metric



Nominal_Comp




















m125 m150 m175 m200 m225 m250 m275 m300 m325

186 183 180 177 174 170 166 161 157

193 190 187 184 181 177 173 168 163

202 199 196 193 189 185 181 176 171

211 208 205 201 198 193 189 183 178

229 225 222 219 215 210 205 200 193

220 217 213 210 206 202 197 191 186

229 225 222 219 214 210 205 199 193

238 234 231 227 223 218 213 207 201

238 234 230 227 224 221 218 215 211

248 243 239 236 232 229 226 223 219

257 252 248 244 241 238 234 231 228

234 230 226 223 219 216 213 210 207

240 234 229 225 221 218 215 212 209

251 246 241 236 233 229 225 222 218

260 254 249 245 241 237 233 230 226

276 271 267 263 260 258 256 253 251

245 242 239 237 235 233 231 229 227

254 251 248 246 244 242 240 238 235

Page 15 - Table Y-1 - SI 04/11/2010

BC01-632 SI Metric



Nominal_Comp




















m350 m375 m400 m425 m450 m475 m500 m525

152 148 143 139 135 132 128 125

158 153 149 144 141 137 133 130

165 160 156 151 147 143 140 136

173 167 162 158 154 150 146 142

187 182 176 171 167 163 158 154

180 175 169 165 160 156 152 148

187 182 176 171 167 162 158 154

195 189 183 178 173 169 164 160

208 204 200 195 189 183 176 169

216 212 207 202 196 190 183 175

224 220 215 210 204 197 190 182

204 200 196 191 186 180 173 166

207 204 201 197 194 189 184 178

215 211 207 202 197 192 186 179

222 218 214 209 204 199 192 185

248 245 241 237 232 225 218 210

224 222 219 215 211 206 199 191

233 230 227 223 219 213 207 198

Page 16 - Table Y-1 - SI 04/11/2010

tables for en 10216-2

Documents