table of contents - spiespie.org/toc/cds85.pdf · volume 5045 testing, reliability, and application...
TRANSCRIPT
Volume 5045 Testing, Reliability, and Application of Micro- and Nano-Material Systems 7
KEYNOTE ADDRESS 7
OVERVIEWS 7
IMAGING TECHNIQUES 7
ACOUSTIC MICROSCOPY 7
X-RAY TECHNIQUES AND MEMS TESTING 8
INTERFACES, LAYERS, AND POLYMERS 8
MICROWAVE AND RADAR TECHNIQUES 8
POSTER SESSION 8
Volume 5046 Nondestructive Evaluation and Health Monitoring of Aerospace Materials and Composites II 10
NDE AND HEALTH MONITORING OF AEROSPACE STRUCTURES I 10
ULTRASONIC EVALUATION OF COMPOSITES 10
ULTRASONIC EVALUATION OF MATERIALS 10
NDE OF COMPOSITES 11
NDE AND HEALTH MONITORING OF AEROSPACE STRUCTURES II 11
GROUND-PENETRATING NDE 11
HEALTH MONITORING OF COMPOSITES 12
Volume 5047 Smart Nondestructive Evaluation and Health Monitoring of Structural and Biological Systems II 13
GUIDED WAVES I 13
GUIDED WAVES II 13
NOVEL INSTRUMENTATION 13
AEROSPACE APPLICATIONS 13
ULTRASONIC MODELING 14
CIVIL ENGINEERING APPLICATIONS I 14
CIVIL ENGINEERING APPLICATIONS II 14
MEDICAL/BIOLOGICAL APPLICATIONS I 15
MARINE APPLICATIONS 15
MEDICAL/BIOLOGICAL APPLICATIONS II 15
POSTER SESSION 15
Volume 5048 Nondestructive Detection and Measurement for Homeland Security 17
STRATEGIES FOR HOMELAND SECURITY 17
ENHANCING MEASUREMENTS FOR HOMELAND SECURITY APPLICATIONS 17
SCREENING TECHNOLOGIES FOR HOMELAND SECURITY APPLICATIONS 17
SENSING TECHNOLOGIES FOR HOMELAND SECURITY APPLICATIONS 17
Volume 5049 Smart Structures and Materials 2003: Modeling, Signal Processing, and Control 19
FERROMAGNETIC MATERIALS 19
SHAPE MEMORY ALLOYS I 19
SHAPE MEMORY ALLOYS II 19
NONLINEAR MODELS 19
NONDESTRUCTIVE EVALUATION 20
STRUCTURAL MODELS I 20
STRUCTURAL CONTROL I 20
STRUCTURAL CONTROL II 20
ADAPTIVE STRUCTURES 21
STRUCTURAL MODELS II 21
OPTIMIZATION OF ACTIVE STRUCTURES 21
OPTIMIZATION 21
SENSORS 22
SYSTEM IDENTIFICATION 22
CONTROL APPLICATIONS 22
APPLICATIONS 23
POSTER SESSION 23
Volume 5050 Smart Structures and Materials 2003: Smart Sensor Technology and Measurement Systems 24
FIBER OPTIC SENSORS I 24
FIBER OPTIC SENSORS II 24
PIEZO SENSORS AND ACOUSTIC SENSING 24
FIBER BRAGG GRATING SENSORS 25
COMPOSITES AND AEROSPACE MONITORING 25
NEW CONCEPTS AND MATERIALS IN SENSING 25
CIVIL STRUCTURE MONITORING 26
POSTER SESSION 26
Volume 5051 Smart Structures and Materials 2003: Electroactive Polymer Actuators and Devices (EAPAD) 27
EAP AS EMERGING ACTUATORS 27
ERF AND BIONIC LIQUIDS 27
MODELING EAP 27
ELECTRONIC EAP: FERROELECTRICS DIELECTRICS 28
IONIC AND NON-IONIC EAP 28
APPLICATIONS OF EAP: ROBOTICS 28
APPLICATION OF EAP 29
APPLICATIONS OF EAP: ACTUATORS I 29
APPLICATIONS OF EAP: OPTICAL DEVICES AND DISPLAYS 29
APPLICATIONS OF EAP: ACTUATORS II 30
POSTER SESSION 30
Volume 5052 Smart Structures and Materials 2003: Damping and Isolation 31
AEROSPACE APPLICATIONS 31
ACTIVE ISOLATION 31
MR/ER FLUID DEVICES I 31
DAMPING MATERIALS I 31
CONSTRAINED LAYER DAMPING 32
MR/ER FLUID DEVICES II 32
ACTIVE VIBRATION ABSORBERS 32
CIVIL APPLICATIONS 32
PARTICLE DAMPING 33
ACTIVE DAMPING 33
SHUNTED PIEZOELECTRIC DAMPING 33
NOVEL PASSIVE DAMPING 33
POSTER SESSION 34
Volume 5053 Smart Structures and Materials 2003: Active Materials: Behavior and Mechanics 35
ACTIVE AND BIOACTIVE POLYMERS AND POLYMER COMPOSITES 35
MULTIFUNCTIONAL MATERIALS AND ACTUATORS I 35
MULTIFUNCTIONAL MATERIALS AND ACTUATORS II 35
SHAPE MEMORY ALLOYS AND MAGNETIC SHAPE MEMORY ALLOYS I 36
SHAPE MEMORY ALLOYS AND MAGNETIC SHAPE MEMORY ALLOYS II 36
SHAPE MEMORY ALLOYS AND MAGNETIC SHAPE MEMORY ALLOYS III 36
MODELING OF ACTIVE MATERIALS I 37
MODELING OF ACTIVE MATERIALS II 37
MODELING OF ACTIVE MATERIALS III 37
PIEZOELECTRIC AND MAGNETIC MATERIALS I 38
PIEZOELECTRIC AND MAGNETIC MATERIALS II 38
PIEZOELECTRIC AND MAGNETIC MATERIALS III 38
POSTER SESSION 39
Volume 5054 Smart Structures and Materials 2003: Industrial and Commercial Applications of Smart Structures Technologies 40
PLENARY PAPER 40
AEROSPACE APPLICATIONS 40
COMPACT HYBRID ACTUATORS 40
SHAPE MEMORY ALLOY DEVICES 40
JAPANESE SMART MATERIALS AND STRUCTURES SYSTEM DEMONSTRATOR PROJECT 41
HEALTH MONITORING 41
LARGE OPTICS AND HEXAPODS 41
SMART STRUCTURES DEVICES 42
MR/COMPOSITES 42
POSTER SESSION 42
Volume 5055 Smart Structures and Materials 2003: Smart Electronics, MEMS, BioMEMS, and Nanotechnology 43
SMART ELECTRONICS I 43
MICROSENSORS AND MEMS I 43
MICROSENSORS AND MEMS II 43
BIOSENSORS, MEMS, AND SYSTEMS 44
POLYMER MEMS FABRICATION 44
CARBON NANOTUBES AND NANOSTRUCTURES 44
ACTUATORS 44
SMART SYSTEM AND DEVICES I 45
SMART SYSTEMS AND DEVICES II 45
POSTER SESSION 45
Volume 5056 Smart Structures and Materials 2003: Smart Structures and Integrated Systems 46
AIRCRAFT AND HELICOPTER APPLICATIONS I 46
HEALTH MONITORING I 46
HEALTH MONITORING II 46
HEALTH MONITORING III 46
AIRCRAFT AND HELICOPTER APPLICATIONS II 47
MODELING AND CONTROL I 47
MODELING AND CONTROL II 47
MODELING AND CONTROL III 48
SENSORS AND ESTIMATION I 48
PIEZOACTUATORS I 48
PIEZOACTUATORS II 48
ER/MR FLUIDS AND DEVICES I 49
SENSORS AND ESTIMATION II 49
SPACE APPLICATIONS 49
ER/MR FLUIDS AND DEVICES II 49
SHAPE MEMORY ACTUATORS/COMPOSITES 50
POSTER SESSION 50
Volume 5057 Smart Structures and Materials 2003: Smart Systems and Nondestructive Evaluation for Civil Infrastructures 51
INFORMATION TECHNOLOGY APPLIED TO CIVIL INFRASTRUCTURE 51
NOVEL SENSORS I 51
NDE FOR CIVIL SYSTEMS I 51
DATA INTERROGATION AND ANALYSIS I 51
SHAPE MEMORY ALLOY APPLICATIONS 52
PASSIVE, ACTIVE, OR SEMIACTIVE DAMPING DEVICES 52
HEALTH MONITORING OF CONSTRUCTED SYSTEMS 52
SYSTEM IDENTIFICATION AND HEALTH MONITORING OF CIVIL SYSTEMS 53
NOVEL SENSORS II 53
SENSOR TECHNOLOGY FOR HEALTH MONITORING 53
NDE FOR CIVIL STRUCTURES II 54
FIBER OPTIC SENSOR TECHNOLOGY FOR HEALTH MONITORING AND NDE 54
MODELING AND ANALYSIS OF SMART SYSTEMS 54
HEALTH MONITORING AND NDE METHODS 55
DATA INTERROGATION AND ANALYSIS II 55
POSTER SESSION 55
Volume 5045 Testing, Reliability, and Application of Micro- and Nano-Material Systems Chairs/Editors: Norbert Meyendorf, George Y. Baaklini, Bernd Michel Conference Committee Introduction SESSION 0 KEYNOTE ADDRESS
Evaluating microdefect structures by AFM-based deformation measurement [5045-27] D. Vogel, J. Keller, A. Gollhardt, B. Michel SESSION 1 OVERVIEWS CHAIR: Bernd Michel, Norbert Meyendorf Nanoacoustics: probing acoustic waves on the nanoscale [5045-4] T. Hesjedal Micro- and nano-NDE systems for aircraft: great things in small packages [5045-2] J. Malas, C. Kropas-Hughes, J. Blackshire, T. Moran, D. Peeler, W. Frazier, D. Parker Recent results and trends in health monitoring with surface acoustic waves (SAWs) [5045-3] B. Tittmann International Center for Nano-Materials reliability [5045-5] N. Meyendorf, B. Michel SESSION 2 IMAGING TECHNIQUES CHAIRS: Donna C. Hurley, Joseph A. Turner Nondestructive nanomechanical imaging: cross-sectional ultrasonic force microscopy of integrated circuit test structures [5045-6] L. Muthuswami, Y. Zheng, R. Geer AFM/MFM hybrid nanocharacterization of martensitic transformation and degradation for Fe-Pd shape memory alloy [5045-7] T. Suzuki, K. Nagatani, K. Hirano, T. Teramoto, M. Taya Microstructural study of nanoprecipitates in RRA treated Al-7075 T6 using AFM/UFM/STEM [5045-8] S. Kuhr, M. Pinnell, D. Eylon Cylindrical polarization symmetry for nondestructive nanocharacterization [5045-47] Q. Zhan Microscopic NDE of hidden corrosion [5045-12] J. Blackshire, J. Hoffmann, C. Kropas-Hughes, I. Tansel SESSION 3 ACOUSTIC MICROSCOPY CHAIRS: Joachim Baumann, Dietmar Vogel Nanoscale nondestructive evaluation of materials and devices by ultrasonic atomic force microscopy [5045-13] K. Yamanaka, T. Tsuji, H. Irihama, T. Mihara
Acoustic microscopy: a powerful tool to inspect microstructures of electronic devices [5045-14] S. Fassbender, K. Kraemer Imaging the microstructure of copper with the atomic force microscope (AFM) and ultrasonic force microscope (UFM) [5045-17] C. Druffner, E. Schumaker, P. Murray, S. Sathish SESSION 4 X-RAY TECHNIQUES AND MEMS TESTING CHAIRS: Gerald Gerlach, Randolf Hanke
X-ray microscopy [5045-20] S. Rokhlin, J. Kim, B. Zoofan In situ real-time x-ray quality assessment of BGA and uBGA connections during soldering [5045-23] O. Scholz, M. Eisenbarth, R. Hanke, T. Bigl, P. Schmitt Determination of polarization profiles inside ferroelectric thin films using the laser intensity modulation method [5045-24] G. Gerlach, T. Sandner, G. Suchaneck Optical interferometric measurements of the static/dynamic response characteristics of MEMS ultrasonic transducers [5045-26] J. Blackshire, S. Sathish SESSION 5 INTERFACES, LAYERS, AND POLYMERS CHAIRS: Tilo Baumbach, Stuart Croll Processing and electrical characterization in intrinsic conducting polymers for electronic and MEMS applications [5045-29] W. Seifert, H. Albrecht, S. Mietke, T. Koehler, M. Werner Characteristics of solder joints under fatigue loads using piezomechanical actuation [5045-48] D. Shim, S. Spearing Monte Carlo simulations of environmental degradation on polymer coatings [5045-31] B. Hinderliter, S. Croll In situ measurements of stress-corrosion crack growth using laser ultrasonics [5045-33] C. Kacmar, J. Blackshire SESSION 6 MICROWAVE AND RADAR TECHNIQUES CHAIRS: James L. Blackshire, Nathan S. Blaunstein Modern frequency estimation algorithms for FMCW radar systems [5045-36] M. Pichler, A. Stelzer, A. Fischer, P. Gulden, R. Weigel Use of ground-penetrating radar for asphalt thickness determination [5045-37] B. Choubane, E. Fernando, S. Ross, B. Dietrich SESSION 7 POSTER SESSION Zinc coating layer thickness on steel wires [5045-40] A. Siddoju, N. Meyendorf, M. Haupert, P. David GMR-based eddy current probes for RRA treated Al-7075 T6 and other high-temperature applications [5045-41] A. Siddoju, S. Kuhr, N. Meyendorf
Investigation of the foaming process of metals by synchrotron radiation imaging [5045-43] L. Helfen, H. Stanzick, J. Ohser, K. Schladitz, P. Rejmankova-Pernot, J. Banhart, T. Baumbach Measurement of complex permittivity of moist sawdust by perturbation method with a dielectric ring resonator [5045-46] Z. Chen, Y. Zhang, S. Okamura
Volume 5046 Nondestructive Evaluation and Health Monitoring of Aerospace Materials and Composites II Chairs/Editors: Andrew L. Gyekenyesi, Peter J. Shull Conference Committee SESSION 1 NDE AND HEALTH MONITORING OF AEROSPACE STRUCTURES I CHAIRS: Jerzy T. Sawicki, Ali Abdul-Aziz Vibration-based crack diagnosis in rotating shafts during acceleration through resonance [5046-1] J. Sawicki, X. Wu, G. Baaklini, A. Gyekenyesi Remaining useful life prediction based on known usage data [5046-3] J. Kiddy Remote temperature and stress monitoring using low-frequency inductive sensing [5046-4] I. Shay, V. Zilberstein, A. Washabaugh, N. Goldfine Preprocessing of Edge of Light images: towards a quantitative evaluation [5046-5] Z. Liu, D. Forsyth, A. Marincak Quantitative interpretation of multifrequency eddy current data by using data fusion approaches [5046-6] Z. Liu, D. Forsyth, M. Safizadeh, B. Lepine, A. Fahr Computerized time-reversal method for structural health monitoring [5046-7] C. Wang, J. Rose, F. Chang Design of a built-in health monitoring system for bolted thermal protection panels [5046-44] J. Yang, F. Chang, M. Derriso SESSION 2 ULTRASONIC EVALUATION OF COMPOSITES CHAIRS: Laura M. Harmon, Richard E. Martin Acousto-ultrasonic characterization of C/SiC composites under different loading configurations [5046-9] L. Cosgriff, R. Martin, G. Baaklini Development and testing of an automated acousto-ultrasonic scan system [5046-10] R. Martin, A. Gyekenyesi, D. Roth The role of epoxy resin in the mechanism of laser-generated ultrasound in carbon-fiber-reinforced composites [5046-11] T. Stratoudaki, C. Edwards, S. Dixon, S. Palmer Real-time full-field ultrasonic inspection of composites using acoustography [5046-12] J. Sandhu, H. Wang, M. Sonpatki, W. Popek SESSION 3 ULTRASONIC EVALUATION OF MATERIALS CHAIRS: Peter J. Shull, Laura M. Harmon Characterization of organic film with scanning acoustic microscopy [5046-14] C. Miyasaka, J. Du, B. Tittmann Development of a new fiber optic vibration sensor and its application to structural health monitoring of composite structures [5046-16] K. Kageyama, I. Ohsawa, M. Kanai, Y. Machijima, H. Matsumura, K. Nagata
Lamb-wave beam-steering for integrated health monitoring applications [5046-17] E. Moulin, N. Bourasseau, J. Assaad, C. Delebarre Application of wavelet analysis in two-dimensional ultrasonic flaw detection [5046-18] A. Achanta, V. Rao SESSION 4 NDE OF COMPOSITES CHAIRS: Ali Abdul-Aziz, Laura M. Harmon Combined NDE/finite element technique to study the effects of matrix porosity on the behavior of ceramic matrix composites [5046-19] A. Abdul-Aziz, L. Ghosn, G. Baaklini, R. Bhatt Recent advances in an artificial neural system for structural health monitoring [5046-20] G. Kirikera, S. Datta, M. Schulz, A. Ghoshal, M. Sundaresan, J. Feaster, D. Hughes Continuous sensors for structural health monitoring [5046-21] S. Datta, G. Kirikera, M. Schulz, M. Sundaresan NDE of composites via quadrupole resonance spectroscopy [5046-22] S. Vierkötter, C. Ward, D. Gregory, S. Menon, D. Roach Sensitivity analysis of all fibers in polarimetric fiber optic sensor for structural health monitoring of composites [5046-25] K. Lee, A. Peiyi, F. Chan, J. Ho, J. Shelly, A. Asundi, G. Hegde Novelty detection technique with SLV for identification of core properties in honeycombs and cellular solids [5046-26] F. Scarpa, G. Manson, M. Ruzzene SESSION 5 NDE AND HEALTH MONITORING OF AEROSPACE STRUCTURES II CHAIRS: Jerzy T. Sawicki, Peter J. Shull Dynamics-based damage inspection of an aircraft wing panel [5046-28] P. Pai, B. Kim, J. Chung Aging wire insulation assessment by phase spectrum examination of ultrasonic guided waves [5046-29] R. Anastasi, E. Madaras NDE of composites delamination by infrared thermography [5046-30] S. Huang, L. Li, H. Yang, K. Shi Health monitoring techniques using integrated sensors [5046-31] K. Pfleiderer, R. Stoessel, G. Busse SESSION 6 GROUND-PENETRATING NDE CHAIRS: Bernhard R. Tittmann, Richard E. Martin GPR antipersonnel mine detection: improved deconvolution and time-frequency feature extraction [5046-33] T. Savelyev, L. van Kempen, H. Sahli
Detection of perturbations in thermal IR signatures: an inverse problem for buried land mine detection [5046-34]
P. Lopez, H. Sahli, D. Vilarino, D. Cabello Proposal for analog synthesis of a land mine detection system [5046-35] F. Pardo, G. Domenech, R. Ruiz, D. Cabello, P. Lopez
SESSION 7 HEALTH MONITORING OF COMPOSITES CHAIR: Richard E. Martin In-flight measurement of acoustic background noise for the development of impact detection algorithms [5046-37] K. Dittrich, G. Mueller Continuous health monitoring of graphite epoxy motorcases (GEM) [5046-38] R. Finlayson, M. Luzio, R. Miller, A. Pollock Imaging Ultrasonic Sensor System SWISS completed 60000 simulated flight hours to check structural integrity of aircraft subcomponent [5046-39] K. Kress, H. Baderschneider, G. Guse Validation of tapping sound analysis for damage detection of composite structures [5046-41] J. Hwang, S. Kim Comparison of acoustography, ultrasonic spectroscopy, and c-scan ultrasonics as applied to the composite flywheels [5046-42] H. Wang, R. Martin, G. Baaklini, J. Sandhu Impedance-based structural health monitoring for composite laminates in cryogenic environments [5046-43] K. Tseng, M. Tinker, J. Lassiter, J. Eckel
Volume 5047 Smart Nondestructive Evaluation and Health Monitoring of Structural and Biological Systems II Chair/Editor: Tribikram Kundu Conference Committee Introduction SESSION 1 GUIDED WAVES I CHAIRS: Tribikram Kundu, Shiv P. Joshi Acoustic emission waveforms in composite laminates under low velocity impact [5047-1] A. Mal, F. Shih, S. Banerjee Lamb wave propagation and scattering in layered composite plates [5047-2] S. Banerjee, P. Banerji, F. Berning, K. Eberle Guided-wave interaction with complex delaminations: application to damage detection in composite structures [5047-3] P. Guy, Y. Jayet, L. Goujon SESSION 2 GUIDED WAVES II CHAIRS: Jaswinder S. Sandhu, Yuris A. Dzenis Strategic sensor locations of FPR bridge decks [5047-4] H. Wu, K. Warnemuende, A. Yan, B. Mu Ultrasonic lamb waves in a thin plate [5047-5] A. Mal, S. Banerjee, W. Prosser Detection of cracks at rivet holes in thin plates using Lamb-wave scanning [5047-6] R. Osegueda, V. Kreinovich, S. Nazarian, E. Roldan SESSION 3 NOVEL INSTRUMENTATION CHAIRS: Victor Giurgiutiu, Alison B. Flatau A new unique electrostatic imager for nondestructive evaluation of printed circuit boards [5047-11] G. Zentai, L. Partain, C. Proano, S. Yamaoka Polymer subtrates for dry-coupled ultrasonic transducers [5047-12] I. Komsky Detailed imager evaluation and unique applications of a new 20cmx25-cm size mercuric iodide thick film x-ray detector [5047-13] G. Zentai, L. Partain, R. Pavlyuchkova, C. Proano, G. Virshup, B. Breen, A. Vilensky, O. Dagan, E. Meerson, M. Schieber, H. Gilboa, J. Thomas
SESSION 4 AEROSPACE APPLICATIONS CHAIRS: Ajit K. Mal, Roy Ikegami Health monitoring system for future reusable launcher: from operational aspects to mission risk management impacts [5047-14] L. Renson
Comparative study of neural network damage detection from a statistical set of electro-mechanical impedance spectra [5047-15] V. Giurgiutiu, C. Kropas-Hughes Active wireless temperature sensors for aerospace thermal protection systems [5047-16] F. Milos, K. Karunaratne Simulation of an electromagnetic health monitoring concept for composite materials: comparison with experimental data [5047-17] M. Lemistre, D. Placko, N. Liebeaux Statistical and Dempster-Shafer techniques in testing structural integrity of aerospace structures [5047-18] R. Osegueda, S. Seelam, B. Mulupuru, V. Kreinovich Hybrid tactile probe for damage detection and material recognition [5047-19] N. Savalli, S. Baglio, G. Muscato, M. Lemistre, D. Balageas
Automated detection of fatigue cracks on the faying surface within high load transfer bolted speciments [5047-20]
G. Wheatley, J. Kollgaard SESSION 5 ULTRASONIC MODELING CHAIRS: Sridhar Krishnaswamy, James A. Sotiropoulos Ultrasonic field computation in the presence of a scatterer of finite dimension [5047-22] D. Placko, T. Kundu, R. Ahmad A three-dimensional transmission line matrix model for ultrasonic imaging [5047-23] R. Ciocan, N. Ida, E. Ciocan SESSION 6 CIVIL ENGINEERING APPLICATIONS I CHAIRS: Joseph A. Turner, Hwai-Chung Wu Joint degradation assessment in an extended structure using chaotic attractor property analysis [5047-24] M. Todd, J. Wait, J. Nichols, S. Trickey Damage detection in structures from vibration and wave propagation data [5047-25] A. Mal, F. Ricci, S. Gibson, S. Banerjee Lag superposition method for structural analysis through ambient vibration [5047-27] Z. Liang, G. Lee 0-3 cement-based piezoelectric ceramic composites [5047-28] Z. Li, B. Dong SESSION 7 CIVIL ENGINEERING APPLICATIONS II CHAIRS: S.-C. Liu, John S. Popovics Elements of an integrated health monitoring framework [5047-29] M. Fraser, A. Elgamal, J. Conte, S. Masri, T. Fountain, A. Gupta, M. Trivedi, M. El Zarki A simple approach to the localization of flaws in large diameter steel cables [5047-30] A. Bergamini, R. Christen A real-time structural parametric identification system based on fiber optic sensing and neural network algorithms [5047-32] Z. Wu, B. Xu
Damage estimation method using committee of neural networks [5047-33] C. Yun, J. Lee, J. Kim, K. Min SESSION 8 MEDICAL/BIOLOGICAL APPLICATIONS I CHAIRS: Dominique Placko, George Zentai A flexible micromachined optical sensor for simultaneous measurement of pressure and shear force distribution on foot [5047-34] W. Wang, R. Panergo, C. Galvanin, W. Ledoux, B. Sangeorzan, P. Reinhall Pressure and temperature distribution in biological tissues by focused ultrasound [5047-35] A. Mal, F. Feng, M. Kabo, J. Wang, Y. Bar-Cohen High-frequency ultrasonic imaging of thickly sliced specimens [5047-36] C. Miyasaka, B. Tittmann, P. Chandraratna Development of a microfabricated scanning endoscope using SU-8-based optical waveguide [5047-37] W. Wang, R. Panergo, P. Reinhall Imaging in turbid media by modified filtered back projection method using data from Monte Carlo simulation [5047-38] A. Aggarwal, R. Vasu SESSION 9 MARINE APPLICATIONS CHAIRS: Kam W. Ng, Michel B. Lemistre Damage detection using wavelets [5047-39] S. Wimmer, V. DeGiorgi Weld line degradation assessment using chaotic attractor property analysis [5047-40] M. Seaver, J. Nichols, S. Trickey, M. Todd Excitation considerations for attractor property analysis in vibration-based damage detection [5047-41] S. Trickey, M. Todd, M. Seaver, J. Nichols SESSION 10 MEDICAL/BIOLOGICAL APPLICATIONS II CHAIRS: Wei-Chih Wang, Per G. Reinhall In vivo results using photothermal tomography for imaging cutaneous blood vessels [5047-42] B. Choi, B. Majaron, G. Vargas, B. Jung, O. Stumpp, N. Kang, K. Kelly, A. Welch, J. Nelson Spectral staining of tumor tissue by fiber optic FTIR spectroscopy [5047-43] R. Salzer, G. Steiner, A. Kano, T. Richter, R. Bergmann, H. Rodig, B. Johannsen, J. Kobelke Comparative studies on cervical and colonic malignancies using FTIR microspectroscopy [5047-44] S. Mordechai, S. Mark, A. Podshyvalov, K. Kantarovich, Y. Bernshtain, A. Salman, V. Erukhimovitch, H. Guterman, J. Goldstein, S. Argov, R. Jagannathan Data processing and analysis of benign, premalignant, and malignant changes in skin tissue samples using FT-IR microspectroscopy [5047-45] N. Skrebova, K. Aizawa, Y. Ozaki, S. Arase SESSION 11 POSTER SESSION The real-time health monitoring system of a large structure based on nondestructive testing [5047-46] M. Choi, K. Kang, J. Kim, H. Park
Neural-network-based modeling of structural parametric evaluation with dynamic responses in time domain [5047-50] B. Xu, Z. Wu, K. Yokoyama Optical biosensor array based on natural ion channels [5047-51] C. Zimmerer, H. Braun, M. Kitsche, G. Steiner, S. Friedrich, R. Salzer
Volume 5048 Nondestructive Detection and Measurement for Homeland Security Chairs/Editors: Steven R. Doctor, Yoseph Bar-Cohen, A. Emin Aktan Conference Committee Introduction SESSION 1 STRATEGIES FOR HOMELAND SECURITY CHAIR: Steven R. Doctor Managing multihazards risk in metropolitan USA [5048-2] A. Aktan, L. Comfort, D. Shanis New challenges in homeland security: smart advanced materials and structural systems [5048-23] H. Wu SESSION 2 ENHANCING MEASUREMENTS FOR HOMELAND SECURITY APPLICATIONS CHAIR: Aaron A. Diaz NDE of copper canisters for long-term storage of spent nuclear fuel from the Swedish nuclear power plants [5048-6] T. Stepinski SESSION 3 SCREENING TECHNOLOGIES FOR HOMELAND SECURITY APPLICATIONS CHAIR: Paul D. Panette Noninvasive ultrasonic examination technology in support of counter-terrorism and drug interdiction activities: the acoustic inspection device (AID) [5048-9] A. Diaz, B. Burghard, J. Skorpik, C. Shepard, T. Samuel, R. Pappas Detection of weapons of mass destruction [5048-10] P. Bjorkholm Millimeter-wave imaging for concealed weapon detection [5048-11] D. McMakin, D. Sheen, T. Hall High-throughput baggage scanning employing x-ray diffraction for accurate explosives detection [5048-12] M. Green, L. Partain How to detect Edgar Allan Poe's 'purloined letter,' or cross-correlation algorithms in digitized video images for object identification, movement evaluation, and deformation analysis [5048-13] M. Dost, D. Vogel, T. Winkler, J. Vogel, R. Erb, E. Kieselstein, B. Michel Personal authentication by integrating palmar geometry and flexion crease analysis [5048-14] M. Yamanaka, J. Doi Novel method of regional facial geometric feature recognition to Chinese human face [5048-15] W. Gong, J. Liu, W. Li, Y. Pan, H. Zhang SESSION 4 SENSING TECHNOLOGIES FOR HOMELAND SECURITY APPLICATIONS CHAIR: Jay W. Grate Calibration of a portable cost-effective chemical residue detection system with adaptive neural net control [5048-16] A. Tripp, J. Walker
Detection of hazardous chemicals using field-portable Raman spectroscopy [5048-19] C. Wright, S. Harvey, B. Wright Miniature mass spectrometer for chemical sensing in homeland defense applications [5048-22] M. Sinha, J. Houseman Local position measurement system for fast and accurate 3D monitoring [5048-20] A. Fischer, G. Pracherstorfer, A. Stelzer, A. Soeser RF-sensor for a local position measurement system [5048-21] A. Stelzer, A. Fischer, F. Weinberger, M. Vossiek
Volume 5049 Smart Structures and Materials 2003: Modeling, Signal Processing, and Control Chair/Editor: Ralph C. Smith Conference Committee SESSION 1 FERROMAGNETIC MATERIALS CHAIR: Ralph C. Smith Analytical and experimental issues in Ni-Mn-Ga transducers [5049-1] L. Faidley, M. Dapino, G. Washington, T. Lograsso, R. Smith SESSION 2 SHAPE MEMORY ALLOYS I CHAIR: Marcelo J. Dapino A free energy model for thin-film shape memory alloys [5049-4] J. Massad, R. Smith, G. Carman Thermal stabilization of shape memory alloy wires [5049-7] P. Kloucek, D. Reynolds, T. Seidman Micromechanical model of polycrystalline shape memory alloys based on Reuss assumption [5049-8] T. Ikeda, F. Nae, Y. Matsuzaki SESSION 3 SHAPE MEMORY ALLOYS II CHAIR: Jordan E. Massad Position control of SMA actuators with internal electrical resistance feedback [5049-9] N. Ma, G. Song, H. Lee Intelligent control of a micromanipulator actuated with shape memory alloy tendons [5049-10] J. Stevens, G. Buckner Finite element simulation of adaptive aerospace structures with SMA actuators [5049-12] J. Frautschi, S. Seelecke Thermodynamics of a 1D shape memory alloy: modeling, experiments, and application [5049-91] J. Shaw, B. Chang, M. Iadicola, Y. Leroy SESSION 4 NONLINEAR MODELS CHAIR: Stefan Seelecke A unified model for hysteresis in ferroic materials [5049-14] R. Smith, S. Seelecke, M. Dapino, Z. Ounaies A dynamic hysteresis model for Thunder transducers [5049-15] B. Ball, R. Smith, Z. Ounaies Preisach modeling of hysteresis and tracking control of a Thunder actuator system [5049-17] X. Zhou, J. Zhao, G. Song, J. De Abreu-Garcia Nonlinear performance analysis of LIPCA actuator by using an assumed strain shell element [5049-18] S. Lee, H. Park, K. Park, K. Yoon, C. Cho
SESSION 5 NONDESTRUCTIVE EVALUATION CHAIR: James M. Nealis Health monitoring and diagnostics of ground combat vehicles [5049-21] E. Bankowski, C. Miles, M. Saboe, P. Gilbert Lamb wave interaction with structural defects: modeling and simulations [5049-22] B. Lee, W. Staszewski Dynamic similarity approach for more robust structural health monitoring in nonlinear, nonstationary, and stochastic systems [5049-23] M. Nataraju, T. Johnson, D. Adams SESSION 6 STRUCTURAL MODELS I CHAIR: Robert E. Skelton Analysis of hybrid PMN/Terfenol broadband transducers in mechanical series configuration [5049-24] P. Downey, M. Dapino, R. Smith Piezoelectic actuation of thin shells with support excitation [5049-25] M. Nader, M. Krommer, H. von Garssen, H. Irschik Modeling of a piezoelectric beam on a semi-infinite elastic strip [5049-26] B. Ananthasayanam, E. Austin Optimal damping in multilayer sandwich beams [5049-27] S. Hansen SESSION 7 STRUCTURAL CONTROL I CHAIR: Robert L. Clark Experimental implementation of an optimal actuator switching policy algorithm in flexible structures [5049-29] M. Demetriou, M. Murugavel Robust control of a magnetostrictive actuator [5049-30] J. Nealis, R. Smith Velocity feedback control with time delay using piezoelectrics [5049-31] J. Roos, J. Bruch, J. Sloss, S. Adali, I. Sadek Relaxed zero spillover controller for active structural acoustic control systems [5049-32] M. Al-Bassyiouni, B. Balachandran Adaptive internal model control for simultaneous precision positioning and vibration suppression of smart structures [5049-33] K. Ma, M. Ghasemi-Nejhad SESSION 8 STRUCTURAL CONTROL II CHAIR: Michael A. Demetriou Optimal control of piezoceramic actuators [5049-34] J. Zhong, S. Seelecke, R. Smith, C. Bueskens Experiments in adaptive optical jitter control [5049-35] M. McEver, D. Cole, R. Clark
Decentralized controller design for smart structural systems [5049-36] P. Liu, V. Rao Dynamic shape control of small vibrations superposed on large static deformations of thin plates [5049-37] M. Krommer, U. Pichler, H. Irschik Simulations of decentralized vibration control with a networked embedded system [5049-38] T. Tao, K. Frampton, A. Ledeczi Comparison of controller design approaches from a vibration suppression point of view [5049-39] T. Nestorovic Trajkov, H. Koeppe, U. Gabbert SESSION 9 ADAPTIVE STRUCTURES CHAIR: Eric M. Austin On the identification of Preisach measures [5049-94] M. Shirley, R. Venkataraman Synthesis of shape morphing compliant mechanisms using a load path representation method 5049-42] K. Lu, S. Kota SESSION 10 STRUCTURAL MODELS II CHAIR: Thomas R. Bewley Modeling of electromechanical coupling problem using the finite element formulation [5049-44] V. Rochus, D. Rixen, J. Golinval Dynamic modeling and control of rectangular plate with piezoceramic sensors and actuators [5049-45] M. Kwak, S. Heo, M. Lee Analysis and modeling of a two-axis thin film piezoelectric actuator [5049-47] X. Chen, C. Fox, S. McWilliam SESSION 11 OPTIMIZATION OF ACTIVE STRUCTURES CHAIR: Douglas K. Lindner Optimization and vibration suppression of adaptive composite panels using genetic algorithm and disturbance observer technique [5049-49] S. Yan, M. Ghasemi-Nejhad Robust design and control of piezoelectric laminate beams using a simultaneous optimization method [5049-50] W. Chen, M. Buehler, G. Parker, B. Bettig Optimization of location and tuning of a state-switched absorber for controlling beam vibration [5049-52] M. Holdhusen, K. Cunefare Design of a piezoelectric actuator using topology optimization [5049-53] J. Drenckhan, A. Lumsdaine SESSION 12 OPTIMIZATION CHAIR: Vasundara V. Varadan Energy optimization of driving amplifiers for smart actuators [5049-54] H. Zhu, C. Song, D. Lindner, M. Abdalla, Z. Gurdal Path planning for the deployment of tensegrity structures [5049-55] J. Pinaud, M. Masic, R. Skelton
Control/structure optimization approach for minimum-time reconfiguration of tensegrity systems [5049-56] J. Aldrich, R. Skelton Design, modeling, and optimization of compliant tensegrity fabrics for the reduction of turbulent skin friction [5049-57] H. Luo, T. Bewley A classifier design method based on the invariance properties of the Bhattacharyya distance functional [5049-58] E. Lopes Multiflexible micromanipulator design by using topology optimization [5049-59] E. Silva, S. Nishiwaki Modeling and optimal control of microscale SMA actuators [5049-13] O. Heintze, S. Seelecke, C. Bueskens SESSION 13 SENSORS CHAIR: Olaf Heintze Modeling of the residual stresses acting on a low-birefringence fiber Bragg grating sensor embedded in an epoxy matrix [5049-60] L. Humbert, J. Botsis, F. Bosia Self-organizing wireless sensor networks for structural health monitoring [5049-62] M. Basheer, V. Rao, M. Derriso SESSION 14 SYSTEM IDENTIFICATION CHAIR: Jason Frautschi System identification and control of ionic polymer metal composite [5049-63] N. Bhat, W. Kim Neural network application in damage identification using multiscale sensing data [5049-64] M. Studer, K. Peters High-resolution evaluation algorithms for SAW-identification tags [5049-65] A. Stelzer, M. Pichler, S. Schuster, S. Scheiblhofer, R. Hauser Nonlinear system identification of base-excited structures using an intelligent parameter varying (IPV) modeling approach [5049-67] S. Saadat, G. Buckner, T. Furukawa, M. Noori SESSION 15 CONTROL APPLICATIONS CHAIR: Ulrich Gabbert Disturbance-observer-based active control of engine-induced vibrations in automotive vehicles [5049-68] C. Bohn, A. Cortabarria, V. Härtel, K. Kowalczyk Fuzzy logic control algorithms for MagneShock semiactive vehicle shock absorbers: design and experimental evaluations [5049-70] M. Craft, G. Buckner, R. Anderson The online generalized predicitive control combined with a fast transversal filter [5049-71] S. Moon, R. Clark, D. Cole Design and control issues on a hybrid linear motor working on self-moving cell concept [5049-72] J. Kim, B. Kang, J. Lim
SESSION 16 APPLICATIONS CHAIR: Ralph C. Smith Maximum modal damping of cable space vibration control with viscous damper in cable-stayed bridge [5049-73] B. Sun, S. Chen, W. Lou Dynamic shape control of conformal antennas [5049-74] M. Krommer, V. Varadan Transient behavior of an ultrasonic wobbling-disk motor [5049-75] S. Gutschmidt, P. Hagedorn Signal processing and damage detection in a frame structure excited by chaotic input force [5049-76] L. Salvino, D. Pines, M. Todd, J. Nichols The optimal selection of mother wavelet shape for the best time-frequency localization of the continuous wavelet transform [5049-77] J. Hong, Y. Kim Novel computational structure for real-time wavelet analysis [5049-78] V. Devassia, M. Mini, T. Thomas SESSION 17 POSTER SESSION Optimization of CMOS APS pixel [5049-79] V. Shilin, P. Skrylev, A. Stempkovsky How much more rain? [5049-80] S. Khan Adaptive backstepping control of a class of hysteretic systems [5049-83] F. Ikhouane, V. Mañosa, J. Rodellar Design of genetic-algorithm-based multimode controller [5049-84] M. Kim, M. Yun, W. Lee Damage detection in a sandwich composite beam using wavelet transforms [5049-88] T. Dawood, R. Shenoi, S. Veres, M. Sahin, M. Gunning Online detection method for transient waves applied to continuous health monitoring of carbon-fiber-reinforced polymer composites with embedded optical fibers [5049-89] J. Papy, S. Van Huffel, L. Rippert, M. Wevers A first example in economic simulation design [5049-90] F. Li, R. Skelton Computer simulation of optimal sensor locations in loading identification [5049-93] D. Li, H. Li, X. Guo
Volume 5050 Smart Structures and Materials 2003: Smart Sensor Technology and Measurement Systems Chairs/Editors: Daniele Inaudi, Eric Udd Conference Committee SESSION 1 FIBER OPTIC SENSORS I CHAIRS: Daniele Inaudi, Eric Udd RF subcarrier-based fiber strain sensor for monitoring composite gas storage tanks [5050-2] F. Dong, G. Thursby, B. Culshaw Flexibility approach for damage localization suitable for multiscale sensor fusion [5050-3] M. Camerino, K. Peters Ultrasonic wavefront integration using optical fiber sensors [5050-5] B. Sorazu, G. Thursby, B. Culshaw, F. Dong, Y. Yong, J. Yao Flight demonstration of fiber optic sensors [5050-6] J. Elster, A. Trego, C. Catterall, J. Averett, M. Jones, M. Evans, B. Fielder Opitcal fiber sensor systems for simultaneous monitoring of strain and damage in smart composites [5050-7] H. Bang, D. Kim, H. Kang, C. Hong, C. Kim SESSION 2 FIBER OPTIC SENSORS II CHAIRS: Daniele Inaudi, Eric Udd Vertical strain determination in the Antarctic ice sheet using optical fibers [5050-8] M. Zumberge Damage detection in structural materials using a polarimetric fiber optic sensor [5050-9] G. Thursby, B. Sorazu, F. Dong, D. Betz, B. Culshaw Four-point calibration of PVDF sensor using extrinsic Fabry-Perot interferometric sensors [5050-10] A. Abdi, S. Watkins SESSION 3 PIEZO SENSORS AND ACOUSTIC SENSING CHAIRS: Brian Culshaw, Peter L. Fuhr BAW and SAW sensors for in situ analysis [5050-11] S. Sherrit, X. Bao, Y. Bar-Cohen, Z. Chang Modal actuators and sensors for beam and plate structures [5050-12] M. Friswell Use of piezoelectric energy harvesting devices for charging batteries [5050-13] H. Sodano, G. Park, D. Leo, D. Inman Piezoelectric-based fluid bulk modulus and diagnostic sensor [5050-14] K. Balasubramanian, C. Niezrecki, J. Schueller
SESSION 4 FIBER BRAGG GRATING SENSORS CHAIRS: Kara J. Peters, Brian Culshaw Lamb wave detection and source location using fiber Bragg grating rosettes [5050-18] D. Betz, G. Thursby, B. Culshaw, W. Staszewski FBG sensors for painted wood panel deformation monitoring [5050-19] R. Falciai, C. Trono, G. Lanterna, C. Castelli Acoustic emission crack detection with FBG [5050-20] C. Baldwin, A. Vizzini Embedded small-diameter fiber Bragg grating sensors and high-speed wavelength detection [5050-22] A. Hongo, K. Fukuchi, S. Kojima, N. Takeda Fiber Bragg grating sensor system for dynamic strain measurement without optical fibers [5050-24] K. Kim, C. Chung SESSION 5 COMPOSITES AND AEROSPACE MONITORING CHAIRS: Eric Udd, Riccardo Falciai Efficient interpretation algorithm for embedded Bragg gratings for damage detection in composites [5050-25] M. Prabhugoud, K. Peters Application of chirped FBG sensors for detection of local delamination in composite laminates [5050-26] S. Takeda, Y. Okabe, N. Takeda Integration of long-gage fiber optic sensor into a fiber-reinforced composite sensing tape [5050-28] B. Glisic, D. Inaudi Distributed sensing of carbon-epoxy composites and composite wound pressure vessels using fiber Bragg gratings [5050-29] J. Grant, R. Kaul, S. Taylor, G. Myer, K. Jackson, A. Sharma Optical fiber grating sensor network to monitor helium gas temperature profile in airship [5050-30] W. Ecke, I. Latka, B. Hoefer, A. Reutlinger, R. Willsch Monitoring shape change in compliant structures [5050-31] E. Rigg, R. Maier, J. Barton, A. Moore, J. Jones, S. McCulloch, A. Wallwork, G. Burnell SESSION 6 NEW CONCEPTS AND MATERIALS IN SENSING CHAIRS: John P. Dakin, Kim D. Bennett Shear and normal strain sensing with electroactive polymer composites [5050-35] T. Filanc-Bowen, G. Kim, Y. Shkel New high-sensitivity hybrid magnetostrictive/electroactive magnetic field sensors [5050-36] J. Huang, R. O'Handley, D. Bono Design and analysis of an electromechanical filter with piezoelectric transducers [5050-37] M. Dmuchoski, W. Clark Positional impact sensing with spatially shaded polyvinylidene fluoride film [5050-38] B. Bray, G. Washington Multichannel and multiaxis inertial sensor concepts based on vibrating structures [5050-39] C. Fox, A. Rourke, R. Eley, C. Fell, S. McWilliam
Mode-selectable ultrasonic transducer for cylindrical ferromagnetic waveguides [5050-40] Y. Kim, H. Lee, S. Cho, Y. Kim Noncontact wave sensing for damage detection in a rotating shaft using magnetostrictive sensors [5050-41] S. Han, Y. Kim, H. Lee SESSION 7 CIVIL STRUCTURE MONITORING CHAIRS: Dryver R. Huston, Pierre Ferdinand Strain measurements by fiber Bragg grating sensors for in situ pile loading tests [5050-43] C. Schmidt-Hattenberger, T. Straub, M. Naumann, G. Borm, R. Lauerer, C. Beck, W. Schwarz Intelligent pipelines using fiber optic sensors [5050-44] R. Tennyson, W. Morison, G. Manuelpillai Health monitoring of the Saint-Jean bridge of Bordeaux, France using fiber Bragg grating extensometers [5050-45] S. Magne, J. Boussoir, S. Rougeault, V. Marty-Dewynter, P. Ferdinand, L. Bureau Vehicle axle detector for roadways based on fiber optic interferometer [5050-46] D. Ðonlagic, M. Hanc SESSION 8 POSTER SESSION Fiber optic time-of-flight radar with a submeter spatial resolution for the measurement of integral strain [5050-48] V. Lyöri, A. Mäntyniemi, A. Kilpelä, Q. Duan, J. Kostamovaara Research on an innovative optical-wave-guided tactile sensing technology [5050-50] Y. Pan, J. Liu, W. Gong, S. Qiao Laser-interferometry-based read-out system for seismic accelerometers [5050-52] F. Acernese, F. Barone, R. De Rosa, L. Milano, K. Qipiani Vibration detection for a composite smart structure embedded with a fiber grating sensor [5050-54] Y. Yoon, S. Chung, M. Kim, W. Lee, B. Lee Structural integrity monitoring of aircraft panels using a distributed Bragg grating sensing technique [5050-57] D. Gifford, B. Childers, R. Duncan, A. Jackson, S. Shaw, W. Schwienberg, J. Mazza Distributed sensing technique for test article damage detection and monitoring [5050-59] R. Duncan, B. Childers, D. Gifford, D. Pettit, A. Hickson, T. Brown
Volume 5051 Smart Structures and Materials 2003: Electroactive Polymer Actuators and Devices (EAPAD) Chair/Editor: Yoseph Bar-Cohen Conference Committee Introduction SESSION 1 EAP AS EMERGING ACTUATORS CHAIRS: Yoseph Bar-Cohen, Geoffrey M. Spinks Biologically inspired technologies in NASA's morphing project [5051-1] A. McGowan, D. Cox, B. Lazos, M. Waszak, D. Raney, E. Siochi, S. Pao Biologically inspired intelligent robots [5051-2] Y. Bar-Cohen, C. Breazeal Electroactive polymer actuator devices (EAPAD) [5051-3] G. Spinks, G. Wallace, J. Ding, D. Zhou, B. Xi, T. Scott, V. Truong EAP actuator design for biologically inspired face-based communication robots [5051-4] D. Hanson Recent advances in thiophene-based molecular actuators [5051-5] P. Anquetil, H. Yu, J. Madden, T. Swager, I. Hunter Bio-inspired design of intelligent materials [5051-6] M. Taya SESSION 2 ERF AND BIONIC LIQUIDS CHAIRS: Ji Su, Donald J. Leo Design of ER fluids for commercial applications [5051-8] A. Smith, L. Evans Electrorheological properties of perchloric-acid-doped polythiophene suspensions [5051-10] D. Chotpattananont, A. Sirivat, A. Jamieson SESSION 3 MODELING EAP CHAIRS: Sia Nemat-Nassar, Qi Ming Zhang Linear constitutive model of ionic polymer bender transducers [5051-11] K. Newbury, D. Leo Two-dimensional computational model for electrostrictive graft elastomer [5051-12] Y. Wang, X. Sun, C. Sun, J. Su Interfacial transport theory for electrochemical phenomena with application to electric double layer [5051-13] J. Boyd, M. Ambati Estimation and reduction of the adhesion forces between ionic polymer metal composite and micro-objects [5051-14] N. Bhat, W. Kim
SESSION 5 ELECTRONIC EAP: FERROELECTRICS DIELECTRICS CHAIRS: Roy D. Kornbluh, Kwang J. Kim Poly(vinylidene-fluoride-trifluoroethylene) based high-performance electroactive polymers [5051-15] F. Xia, H. Li, C. Huang, M. Huang, H. Xu, F. Bauer, Z. Cheng, Q. Zhang Shape control of large lightweight mirrors with dielectric elastomer actuation [5051-16]
R. Kornbluh, D. Flamm, H. Prahlad, K. Nashold, S. Chhokar, R. Pelrine, D. Huestis, J. Simons, T. Cooper, D. Watters
Pressure-volume characteristics of dielectric elastomer diaphragms [5051-17] A. Tews, K. Pope, A. Snyder The effective electrostriction of P(VDF-TrFE)-polymer-based composites [5051-18] J. Li, N. Rao Elastomeric composites with high-dielectric constant for use in Maxwell stress actuators [5051-19] J. Szabo, J. Hiltz, C. Cameron, R. Underhill, J. Massey, B. White, J. Leidner Composition and annealing effects on the response of electrostrictive graft elastomers [5051-20] J. Su, K. Hales, T. Xu SESSION 6 IONIC AND NON-IONIC EAP CHAIRS: John D. Madden, Liming Dai Quick and large electrostrictive deformation of non-ionic soft polymer materials [5051-21] T. Hirai, M. Uddin, J. Zheng, M. Yamaguchi, S. Kobayashi, M. Watanabe, H. Shirai Contraction/elongation behavior of cation-modified polyacrylonitrile fibers [5051-23] K. Kim, J. Caligiuri, K. Choe, M. Shahinpoor Multilayer ionic polymer transducer [5051-67] B. Akle, D. Leo Soft actuators based on conducting polymers: recent progress [5051-25] K. Kaneto, H. Somekawa, W. Takashima Experimental study of Nafion- and Flemion-based ionic polymer metal composites (IPMCs) with ethylene glycol as solvent [5051-26] S. Nemat-Nasser, S. Zamani Tailoring actuation of ionic polymer metal composites through cation combination [5051-59] S. Nemat-Nasser, Y. Wu Low-temperature operation of ionic polymer metal composite actuators [5051-28] J. Paquette, K. Kim, A. Fuchs SESSION 7 APPLICATIONS OF EAP: ROBOTICS CHAIRS: Keiichi Kaneto, Minoru Taya Multiple degree-of-freedom digital soft actuator for robotic applications [5051-29] H. Choi, K. Jung, J. Kwak, S. Lee, H. Kim, J. Jeon, J. Nam Tadpole robot (TadRob) using ionic polymer metal composite (IPMC) actuator [5051-30] J. Jung, Y. Tak, B. Kim, J. Park, S. Lee, J. Pak Multifunctional electroelastomer roll actuators and their application for biomimetic walking robots [5051-31] Q. Pei, M. Rosenthal, R. Pelrine, S. Stanford, R. Kornbluh
Control of an electrostrictive polymer actuator with no sensor [5051-32] J. Youn, J. Jeon, H. Choi, H. Kim, J. Nam Development of artificial muscle actuator using an ionic polymer with its application to biped walking robots [5051-33] M. Yamakita, N. Kamamichi, Y. Kaneda, K. Asaka, Z. Luo SESSION 9 APPLICATION OF EAP CHAIRS: Heino Finkelmann, Toshihiro Hirai Vibrational and acoustic studies of bending mode piezoelectricity in millimeter-size polyvinylidene fluoride cantilevers [5051-35] N. Mukherjee, A. Shukla, A. Dwivedi, R. Roseman, D. Thompson Modeling of a dielectric elastomer diaphragm for a prosthetic blood pump [5051-36] N. Goulbourne, M. Frecker, E. Mockensturm, A. Snyder MEMS-fabricated ICPF microactuators for biological manipulation [5051-37] W. Zhou, W. Li, J. Mai Experimental analysis on the properties of polypyrrole as drug delivery system materials [5051-38] S. Lee, S. Lee, S. Cho, J. Pak, B. Kim SESSION 10 APPLICATIONS OF EAP: ACTUATORS I CHAIRS: Gordon G. Wallace, Alan J. Snyder Synthesis and characterization of EDOT-based conducting polymer actuators [5051-41] N. Vandesteeg, P. Madden, J. Madden, P. Anquetil, I. Hunter Paper fiber studies for electroactive paper acuators [5051-42] J. Kim, S. Youn, Y. Seo Flemion-based actuator for mechanically controlled microwave switch [5051-43] M. Le Guilly, C. Xu, V. Cheng, M. Taya, L. Opperman, Y. Kuga SESSION 11 APPLICATIONS OF EAP: OPTICAL DEVICES AND DISPLAYS CHAIRS: Ron Pelrine, Michael S. Banik Ionic liquids and polypyrrole helix tubes: bringing the electronic Braille screen closer to reality [5051-44] G. Spinks, G. Wallace, J. Ding, D. Zhou, B. Xi, J. Gillespie Numerical modeling of single-layer electroactive polymer mirrors for space applications [5051-45] X. Bao, Y. Bar-Cohen, Z. Chang, S. Sherrit Modulation of refractive index in polymer composites: toward a synthetic bio-optic lens [5051-46] T. Smith, G. Wnek Prospective optical electroactive polymers [5051-47] A. Al-Jumaily, S. Jassim Enhanced smart window based on electrochromic (EC) polymers [5051-49] C. Xu, L. Liu, S. Legenski, M. Le Guilly, M. Taya, A. Weidner Photoconductive high-voltage switches of thin film amorphous silicon for EAP actuators [5051-60] S. Lacour, R. Pelrine, S. Wagner, H. Prahlad
SESSION 12 APPLICATIONS OF EAP: ACTUATORS II CHAIRS: Wen-Liang Liu, Alberto Mazzoldi High-strain dielectric elastomer for actuation [5051-51] F. Carpi, A. Mazzoldi, D. De Rossi Polypyrrole actuators for tremor suppression [5051-52] S. Skaarup, N. Mogensen, L. Bay, K. West Polymer-based electrochemical devices for logic functions and paper displays [5051-53] M. Berggren, D. Nilsson, M. Chen, P. Andersson, T. Kugler, A. Malmstroem, J. Haell, T. Remonen, N. Robinson Conducting-polymer-driven actively shaped propellers and screws [5051-54] J. Madden, B. Schmid, S. Lafontaine, P. Madden, F. Hover, K. McLetchie, I. Hunter Field-aided microtailoring of polymeric nanocomposites [5051-55] G. Kim, Y. Shkel, R. Rowlands Exploiting conducting polymer fiber radial expansion for bio-inspired actuation [5051-58] W. Rocchia, A. Mazzoldi, G. Serra, D. De Rossi SESSION 13 POSTER SESSION Electromechanical behavior of smectic liquid crystal elastomers [5051-61] V. Das, D. Brown, P. Styring, R. Allen Recruited dielectric elastomer motor units as a pseudomuscular actuator [5051-63] F. Lorussi, A. Tognetti, F. Carpi, A. Mazzoldi, D. De Rossi All-organic electrochemical device with bistable and dynamic functionality [5051-65] D. Nilsson, M. Chen, P. Svensson, N. Robinson, T. Kugler, M. Berggren Parallel ionic polymer metal composites to generate increased force output [5051-66] R. Richardson, K. Watterson, M. Levesley, M. Brown, J. Hawkes, P. Walker Analysis of mechanical characteristics of the ionic polymer metal composite (IPMC) actuator using cast ion-exchange film [5051-69] B. Kim, B. Kim, J. Ryu, I. Oh, S. Lee, S. Cha, J. Pak Electromechanical response in liquid crystal gels and networks [5051-71] C. Huang, Q. Zhang, A. Jákli Gel-type changeable focal length lens [5051-72] R. Paxton, A. Al-Jumaily, A. Easteal Gas concentration control by directly linking sensor to actuator [5051-73] M. Andrews, M. Jansen, J. Morris, G. Spinks, D. Zhou, G. Wallace Characterizations of semi-interpenetrating polymer network hydrogels constructed with chitosan and polyacrylonitrile [5051-74] S. Shin, S. Yoon, S. Park, K. Lee, C. Lee, S. Kim, S. Kim The bending mechanism of thermoplastic polyurethane under an applied electric field [5051-75] K. Lam, Y. Wong, L. Tai, Y. Poon, F. Shin Polarization effect of electroactive cellulose [5051-76] C. Je, K. Kim Electrical behavior of polymer hydrogel composed of poly(vinyl alcohol)/hyaluronic acid in solution [5051-77] S. Kim, S. Yoon, S. Park, C. Lee, S. Shin, Y. Lee, I. Kim, S. Kim
Volume 5052 Smart Structures and Materials 2003: Damping and Isolation Chairs/Editors: Gregory S. Agnes, Kon-Well Wang Conference Committee SESSION 1 AEROSPACE APPLICATIONS CHAIRS: Gregory S. Agnes, Wolfgang G. Luber Vibration suppression of advanced space cryocoolers: an overview [5052-1] R. Ross SESSION 2 ACTIVE ISOLATION CHAIRS: Joseph R. Maly, Richard G. Cobb Survey of state-of-the-art vibration isolation research and technology for space applications [5052-3] M. Winthrop, R. Cobb Development of the active vibration isolation device using PZT wafers [5052-5] M. Kwak, S. Heo, S. Kim SESSION 3 MR/ER FLUID DEVICES I CHAIRS: Norman M. Wereley, Dale Ruebsamen Properties of a magnetorheological semi-active vibration absorber [5052-8] A. Albanese, K. Cunefare A thin film magnetorheological (MR) damper/lock [5052-9] M. Zeng, G. Song Nondimensional quasi-steady analysis of magnetorheological dampers utilizing a Herschel-Bulkley model with preyield viscosity [5052-10] S. John, N. Wereley Constitutive models of electrorheological and magnetorheological fluids using viscometers [5052-11] J. Cho, Y. Choi, N. Wereley Experimental evaluation of magnetorheological dampers for semi-active tuned vibration absorbers [5052-12] J. Koo, M. Ahmadian, M. Setareh SESSION 4 DAMPING MATERIALS I CHAIR: Razvan Rusovici Vibration damping in Ni-Mn-Ga composites [5052-14] J. Feuchtwanger, K. Griffin, J. Huang, R. O'Handley, S. Allen, D. Bono Damping property of metallic closed cellular materials containing organic materials [5052-15] S. Kishimoto, Z. Song, N. Shinya Dynamics of suspensions with rare-earth permanent magnets [5052-16] B. Piombo, A. Vigliani, E. Bonisoli Determination of piezoelectric transducer damping by using experimental and finite element simulations [5052-17] G. Nader, E. Silva, J. Adamowski
SESSION 5 CONSTRAINED LAYER DAMPING CHAIRS: Conor D. Johnson, Steve I.Y. Shen Life cycle testing of viscoelastic material for Hubble Space Telescope solar array 3 damper [5052-18] J. Maly, B. Reed, M. Viens, B. Parker, S. Pendleton Engineered connectivity in carbon nanotube films for damping applications [5052-19] E. Lass, P. Ajayan, N. Koratkar Investigations of viscoelastic structure behavior using a three-dimensional anelastic displacement field finite element [5052-20] R. Rusovici, G. Lesieutre SESSION 6 MR/ER FLUID DEVICES II CHAIRS: Mehdi Ahmadian, Faramarz Gordaninejad Modeling of smart fluid dampers [5052-21] N. Sims, N. Wereley Impact of varying concentrations of nanometer-sized particles in a bidisperse magnetorheological fluid [5052-22] J. Trihan, J. Yoo, N. Wereley, S. Kotha, A. Suggs, R. Radhakrishnan, T. Sudarshan, B. Love Experimental validation of a novel stictionless magnetorheological fluid isolator [5052-24] S. Kelso, K. Denoyer, R. Blankinship, K. Potter, J. Lindler A new magnetorheological fluid damper for high-mobility multipurpose wheeled vehicle (HMMWV) [5052-25] U. Dogruer, F. Gordaninejad, C. Evrensel SESSION 7 ACTIVE VIBRATION ABSORBERS CHAIRS: Kon-Well Wang, Jian Q. Sun An autonomous piezoelectric shunt damping system [5052-26] A. Fleming, S. Behrens, S. Moheimani Optimization of the individual stiffness and damping parameters in multiple-tuned-mass damper systems [5052-27] L. Zuo, S. Nayfeh Distributed electric absorbers of beam vibrations [5052-29] F. dell'lsola, D. Del Vescovo, C. Maurini Improved current and charge amplifiers for driving piezoelectric loads [5052-30] A. Fleming, S. Moheimani Microgravity flight characterization of the International Space Station active rack isolation system [5052-58] G. Bushnell, I. Fialho, J. Allen, N. Quraishi SESSION 8 CIVIL APPLICATIONS CHAIRS: Amr M. Baz, Andrew R. Johnson Development of 400kN magnetorheological damper for a real base-isolated building [5052-31] H. Fujitani, H. Sodeyama, T. Tomura, T. Hiwatashi, Y. Shiozaki, K. Hata, K. Sunakoda, S. Morishita, S. Soda
Shaking table tests on earthquake response reduction effects of rocking structural systems [5052-33] M. Midorikawa, T. Azuhata, T. Ishihara, Y. Matsuba, A. Wada Study on applicability of rocking structural systems to building structures [5052-34] T. Azuhata, M. Midorikawa, A. Wada Design of a tunable bushing system using shape memory alloy wires [5052-35] G. Mirone Variable semi-active TLCD damper applying artifical neural networks [5052-32] H. Li, S. Yan, S. Wang SESSION 9 PARTICLE DAMPING CHAIRS: Geoffrey R. Tomlinson, Daniel J. Inman Granular-filled composite struts for increased damping in hexapod applications [5052-36] K. Cowden, D. Bishop, D. Walrath, J. McInroy SESSION 10 ACTIVE DAMPING CHAIRS: Donald J. Leo, Roy Ikegami Vibration nullification of MEMS devices using input shaping [5052-39] S. Jordan, E. Lawrence Application of wave-absorbing control using imaginary system to one-dimensional structures [5052-41] M. Saigo, D. Nam Electrodynamic vibration supression [5052-43] S. Behrens, A. Fleming, S. Moheimani SESSION 11 SHUNTED PIEZOELECTRIC DAMPING CHAIRS: William W. Clark, Eric M. Austin Robust passive piezoelectric shunt dampener [5052-44] S. Behrens, A. Fleming, S. Moheimani Power regeneration in active vibration isolation systems [5052-45] N. Vujic, D. Leo, D. Lindner A novel passive electric network analog to Kirchhoff-Love plate designed to efficiently damp forced vibrations by distributed piezoelectric tranducers [5052-46] S. Alessandroni, U. Andreaus, F. dell'lsola Piezoelectromechanical structures: new trends towards multimodal passive vibration control [5052-48] F. dell'lsola, E. Henneke, M. Porfiri SESSION 12 NOVEL PASSIVE DAMPING CHAIRS: Samir A. Nayfeh, Zahidul H. Rahman Vibration damping by coupling to lossy low-wave-speed media [5052-51] K. Varanasi, S. Nayfeh A new semi-active piezoelectric-based friction damper [5052-52] M. Unsal, C. Niezrecki, C. Crane In-plane and out-of-plane vibration suppression of stay cable by viscous dampers [5052-53] W. Lou, S. Chen, B. Sun
SESSION 13 POSTER SESSION Aerospace electronics weight reduction through the use of active mass damping [5052-2] B. Esser, D. Huston, J. Miller Adaptive electrorheological layer for precision control of thin-wall constructions [5052-54] E. Korobko, V. Kolik, Y. Korobko Digital control system for mechanical damping of a suspended mass [5052-55] F. Acernese, F. Barone, R. De Rosa, L. Milano, K. Qipiani, F. Silvestri Semi-active seismic response control of base-isolated building with MR damper [5052-56] S. Soda, H. Kusumoto, R. Chatani, N. Iwata, H. Fujitani, Y. Shiozaki, T. Hiwatashi Identification of acoustic properties of auxetic foams [5052-57] F. Scarpa, F. Dallocchio, M. Ruzzene
Volume 5053 Smart Structures and Materials 2003: Active Materials: Behavior and Mechanics Chair/Editor: Dimitris C. Lagoudas Conference Committee SESSION 1 ACTIVE AND BIOACTIVE POLYMERS AND POLYMER COMPOSITES CHAIRS: Zoubeida Ounaies, Donald J. Leo Electrical and electrochemical characterization of electroconductive PPy-p(HEMA) composite hydrogels [5053-1] S. Brahim, G. Slaughter, A. Guiseppi-Elie Electromechanical modeling of charge sensing in ionic polymers [5053-3] K. Farinholt, D. Leo Temperature- and magnetic-field-induced phase transformation in bulk and composite Gd5Si2Ge2 [5053-4] N. Nersessian, S. Or, G. Carman, W. Choe, H. Radousky, V. Pecharsky, A. Pecharsky Conformational mechanics of stimulus-responsive polypeptides [5053-5] A. Valiaev, R. Clark, A. Chilkoti, S. Zauscher Ferroelectric fluoro-terpolymers with high dielectric constant and large electromechanical response at ambient temperature [5053-6] T. Chung, A. Petchsuk Thin films of light-responsive polymers for sensing and surface patterning [5053-7] C. Barrett, O. Mermut, K. Yager SESSION 2 MULTIFUNCTIONAL MATERIALS AND ACTUATORS I CHAIR: Dimitris C. Lagoudas Overview of multifunctional materials [5053-8] P. Matic Effective properties of three-phase electro-magneto-elastic multifunctional composite materials [5053-9] J. Lee, J. Boyd, D. Lagoudas Initial investigation in actuator design using high-temperature shape memory alloy [5053-10] M. Qidwai, A. Bhattacharyya, I. Vahhi, S. Pulnev A bio-inspired high-authority actuator for shape morphing structures [5053-11] D. Elzey, A. Sofla, H. Wadley SESSION 3 MULTIFUNCTIONAL MATERIALS AND ACTUATORS II CHAIR: Muhammad A. Qidwai Bistable shape memory thin film actuators [5053-12] T. Sterzl, B. Winzek, M. Mennicken, R. Nagelsdiek, H. Keul, H. Hoecker, E. Quandt SMA-thin film composites providing traveling waves [5053-13] B. Winzek, S. Schmitz, H. Rumpf, T. Sterzl, E. Quandt 3D finite-element simulation of a shape memory microgripper [5053-14] B. Krevet, M. Kohl
Characteristics of magnetic force control device with magnetostrictive and piezoelectric laminate composite [5053-15] T. Ueno, J. Qiu, J. Tani Carbon nanotubes as actuators in smart structures [5053-16] H. Monner, S. Muehle, P. Wierach SESSION 4 SHAPE MEMORY ALLOYS AND MAGNETIC SHAPE MEMORY ALLOYS I CHAIR: Roshdy G. S. Barsoum Effect of composition on the magnetic and elastic properties of shape-memory Ni-Mn-Ga [5053-29] A. Malla, M. Dapino, T. Lograsso, D. Schlagel Martensitic transformation behavior under magnetic field in Co-Ni-Al ferromagnetic shape memory alloys [5053-19] Y. Sutou, R. Kainuma, K. Ishida, M. Taya Experimental characterization of NiMnGa magnetic shape memory alloy rods under dynamic magnetic fields [5053-20] R. Couch, I. Chopra Effects of growth rate and composition on the microstructure of directionally solidified NiMnGa alloys [5053-21] J. Chen, M. Gharghouri, C. Hyatt Shape memory effect and magnetostriction-sputtered NiMnGa thin films [5053-22] H. Rumpf, J. Feydt, D. Lewandowski, A. Ludwig, B. Winzek, E. Quandt, P. Zhao, M. Wuttig SESSION 5 SHAPE MEMORY ALLOYS AND MAGNETIC SHAPE MEMORY ALLOYS II CHAIR: Manfred R. Wuttig Magnetic field-induced strain in single-crystal Ni-Mn-Ga [5053-24] R. O'Handley, S. Allen, D. Paul, C. Henry, M. Marioni, D. Bono, C. Jenkins, A. Banful, R. Wagner Frequency response of single-crystal Ni-Mn-Ga FSMAs [5053-25] C. Henry, P. Tello, D. Bono, J. Hong, R. Wagner, J. Dai, S. Allen, R. O'Handley SESSION 6 SHAPE MEMORY ALLOYS AND MAGNETIC SHAPE MEMORY ALLOYS III CHAIR: Abhijit Bhattacharyya Grown crystalline Ni-Ti shape memory alloy thin films [5053-28] K. Mohanchandra, G. Carman Thermomechanical properties of Ni60%weightTi40%weight [5053-30] D. Clingman, F. Calkins, J. Smith Composition and annealing effects on the mechanical properties of superelastic thin film nickel titanium [5053-31] J. Woolman, K. Mohanchandra, G. Carman Shape memory alloys characterization by different methods [5053-32] A. Barcellona Low-cost high-quality Fe-based shape memory alloys suitable for pipe joints [5053-34] S. Kajiwara, A. Baruj, T. Kikuchi, N. Shinya Dynamic response of a frame with SMA bracing [5053-84] S. Sun, R. Rajapakse
SESSION 7 MODELING OF ACTIVE MATERIALS I CHAIR: Christopher S. Lynch Micromechanical approach of stress-induced phase transformation [5053-35] E. Patoor Sharp phase front model of phase transformation and micro-macro transitions in shape memory alloys [5053-37] V. Stoilov, A. Bhattacharyya Numerical studies of wave propagation in polycrystalline shape memory alloy rods [5053-38] D. Lagoudas, P. Popov Modeling the hysteresis of a simple SMA wire actuator with a load-dependent Preisach-type operator [5053-39] W. Galinaitis, J. Poling Calculation of the onset and progress of the martenistic transformation using tensorial measures for transformation kinetics [5053-40] C. Oberste-Brandenburg The effective electromechanical moduli of ferroelectric crystals with engineered domain configurations [5053-41] J. Li, D. Liu SESSION 8 MODELING OF ACTIVE MATERIALS II CHAIR: Gregory P. Carman Micro-electromechanically informed phenomenological constitutive models for ferroelectrics [5053-42] C. Landis, J. Wang, J. Sheng Crystal-variant-based modeling of relaxor single crystals [5053-43] T. Liu, C. Lynch A micro-electromechanical model of ferroelectric materials with thermal and rate effects [5053-44] L. Mauck, C. Lynch Modeling large strain electrostriction of ferroelectrics under combined electromechanical loads [5053-45] W. Zhang, K. Bhattacharya SESSION 9 MODELING OF ACTIVE MATERIALS III CHAIR: Donald J. Leo New approach to solving crack tip stress fields for piezoelectric materials [5053-48] W. Oates, C. Lynch Polarization switching of ferroelectric polycrystals: finite element modeling and simulations [5053-49] S. Kim Influence of the fracture process zone in ferroelectrics on the effective fracture toughness [5053-50] A. Ricoeur, M. Kuna Fully three-dimensional incremental model of magneto-elastic hysteresis in terfenol-D [5053-51] W. Armstrong A general FEM technique to model wave propagation in cellular periodic structures [5053-53] M. Ruzzene, F. Scarpa
SESSION 10 PIEZOELECTRIC AND MAGNETIC MATERIALS I CHAIR: Robert M. McMeeking Prestressed curved actuators: characterization and modeling of their piezoelectric behavior [5053-54] K. Mossi, Z. Ounaies, R. Smith, B. Ball Large-stroke low-profile single-crystal piezoelectric actuators [5053-55] X. Jiang, P. Rehrig, W. Hackenberger, T. Shrout High-performance tonpilz transducers utilizing d32-cut piezoelectric single crystals [5053-56] P. Rehrig, W. Hackenberger, X. Jiang, R. Meyer, X. Geng Characterization of loaded prestressed piezoelectric actuators [5053-57] K. Mossi, L. Scott, S. Haran Nonlinear behavior of piezoelectric lead zinc niobate-lead titanate single crystals under AC electric fields [5053-58] W. Ren, S. Liu, B. Mukherjee Adhesive characterization in prestressed piezoelectric laminates [5053-59] C. Hodges, K. Mossi, L. Scott Fabrication of piezoelectric fibers with metal core [5053-60] J. Qiu, J. Tani, N. Yamada, H. Takahashi Extended-temperature-range piezoactuator system with very large movement [5053-61] P. Weaver, A. Ashwell, Y. Zheng, S. Powell SESSION 11 PIEZOELECTRIC AND MAGNETIC MATERIALS II CHAIR: Thomas R. Shrout Microdomains and averaged symmetry in poled Pb(Mg1/3Nb2/3)O3-PbTiO3 crystals [5053-62] D. Viehland, B. Ruette, J. Li Dependency of electric field and mechanical stress on piezoelectric strain of PZT 3203HD [5053-64] S. Jang, Y. Kim, S. Lee, H. Park, K. Yoon Measurement of all the elastic, piezoelectric, and dielectric properties of PMN-PT single crystals [5053-65] S. Lee, S. Lee, Y. Roh, H. Lee, J. Han Analysis of the influence of tiny mirrors and mechanical holder in the interferometric measurements of piezoceramic displacements operating in a kHz range [5053-66] G. Nader, A. Shirahige, E. Silva, J. Adamowski SESSION 12 PIEZOELECTRIC AND MAGNETIC MATERIALS III CHAIR: William D. Armstrong Computation of fracture toughness of giant magnetostrictive material [5053-69] T. Koko, P. Rushton, C. Hyatt Mechanical properties of magnetostrictive iron-gallium alloys [5053-70] R. Kellogg, A. Russell, T. Lograsso, A. Flatau, A. Clark, M. Wun-Fogle
SESSION 20 POSTER SESSION High-field behavior of piezoelectric fiber composites [5053-72] L. Nelson, C. Bowen, R. Stevens, M. Cain, M. Stewart Modeling and measurement of piezoelectric fibers and interdigitated electrodes for the optimization of piezofibre composites [5053-73] L. Nelson, C. Bowen, R. Stevens, M. Cain, M. Stewart Direct numerical simulation of active fiber composite [5053-77] S. Kim, J. Hwang, S. Paik Comparison of martensite transformation temperatures in a NiMnGa alloy determined with hot/cold stage optical microscopy and differential scanning calorimetry [5053-79] C. Hyatt, S. Farrell, B. Armstrong, J. Bennett, I. Keough, G. Fisher, J. Chen, M. Gharghouri Effect of crystal structure on magnetic-field-induced strain in Ni-Mn-Ga [5053-80] A. Sozinov, A. Likhachev, N. Lanska, O. Söderberg, K. Ullakko, V. Lindroos Elasticity of austenitic and martensitic NiMnGa [5053-82] L. Dai, J. Cui, M. Wuttig Dynamic deformation in MR elastomer driven by magnetic field [5053-87] G. Zhou, Z. Jiang Fatigue life characterization of shape memory alloys undergoing thermomechanical cyclic loading [5053-92] O. Bertacchini, D. Lagoudas, E. Patoor
Volume 5054 Smart Structures and Materials 2003: Industrial and Commercial Applications of Smart Structures Technologies Chair/Editor: Eric Anderson Conference Committee SESSION PLENARY PAPER Electrical and mechanical field interactions of piezoelectric systems: foundation of smart-structure-based piezoelectric sensors and actuators, piezotransformers, and free-fall sensors [5054-100] C. Lee, Y. Hsu, W. Hsiao, J. Wu SESSION 1 AEROSPACE APPLICATIONS CHAIR: Edward V. White Development of moving spars for active aeroelastic structures [5054-2] M. Amprikidis, J. Cooper Design and application of compliant mechanisms for morphing aircraft structures [5054-3] S. Kota, J. Hetrick, R. Osborn, D. Paul, E. Pendleton, P. Flick, C. Tilmann High-frequency jet nozzle actuators for noise reduction [5054-4] C. Davis, F. Calkins, G. Butler Design of diaphragm actuator based on ferromagnetic shape memory alloy composite [5054-5] Y. Liang, M. Taya, Y. Kuga Measurements and performance prediction of an adaptive wing micro air vehicle [5054-6] S. Shkarayev, W. Jouse, W. Null, M. Wagner Vibro-Acoustic Launch protection Experiment at the Air Force Research Laboratory [5054-7] B. Henderson, S. Lane, C. Gerhart, R. Richard Application of smart material-hydraulic actuators [5054-8] E. Anderson, G. Bales, E. White SESSION 2 COMPACT HYBRID ACTUATORS CHAIR: Janet M. Sater Compact hybrid actuator device (CHAD) for ultracompact navigation, guidance, and control [5054-9] L. Momoda, D. Croft, G. Carman, D. Shin Design and testing of piezoelectric-hydraulic actuators [5054-11] J. Lindler, E. Anderson, M. Regelbrugge Nanometer resolution actuator with multimillimeter range and power-off hold [5054-12] G. Powers, Q. Xu, J. Fasick, J. Smith SESSION 3 SHAPE MEMORY ALLOY DEVICES CHAIR: Edward V. White Miniature actuator using thin-film shape-memory alloy [5054-14] D. Shin, K. Mohanchandra, D. Lee, G. Carman
Design of spring actuators made of ferromagnetic shape memory alloy and composites [5054-15] T. Wada, R. Lee, S. Chen, M. Kusaka, M. Taya Development of the fuel-powered compact SMA actuator: second generation actuator [5054-16] H. Jun, R. Allen, D. Lagoudas, O. Rediniotis Thermoelectric SMA actuator: preliminary prototype testing [5054-17] M. Khan, D. Lagoudas, O. Rediniotis Design of torque actuators based on ferromagnetic shape memory alloy composites [5054-18] M. Taya, T. Wada, M. Kusaka, R. Lee SESSION 4 JAPANESE SMART MATERIALS AND STRUCTURES SYSTEM DEMONSTRATOR PROJECT CHAIR: Anna-Maria R. McGowan Overview of demonstrator program of Japanese Smart Materials and Structure System project [5054-19] N. Tajima, T. Sakurai, M. Sasajima, N. Takeda, T. Kishi Overview of damage detection and damage suppression demonstrator and strain distribution measurement using distributed BOTDR sensors [5054-20] T. Yari, K. Nagai, T. Shimizu, N. Takeda Impact damage detection system using small-diameter optical fiber sensors wavily embedded in CFRP laminate structures [5054-21] H. Tsutsui, A. Kawamata, J. Kimoto, A. Isoe, Y. Hirose, T. Sanda, N. Takeda Damage suppression system using embedded SMA (shape memory alloy) foils in CFRP laminate structures [5054-23] T. Ogisu, M. Shimanuki, S. Kiyoshima, J. Takaki, N. Takeda Smart manufacturing of low-cost integrated panel by resin transfer molding [5054-24] I. Okumura, K. Yamagishi, T. Ito, S. Kitade, Y. Shigegaki Noise and vibration reduction technology in aircraft internal cabin [5054-25] K. Takahashi, H. Monzen, T. Yamaoka, K. Kusumoto, K. Bansaku, J. Kimoto, A. Isoe, Y. Hirose, T. Sanda, Y. Matsuzaki
SESSION 5 HEALTH MONITORING CHAIR: Grigory Adamovsky Monitoring the integrity of filament-wound structures using built-in sensor networks [5054-26] M. Lin, A. Kumar, X. Qing, S. Beard, S. Russell, J. Walker, T. Delay Second-generation fiber grating traffic monitoring systems on the I-84 freeway [5054-27] M. Kunzler, E. Udd, T. Taylor, W. Kunzler Fiber optic structural monitoring system of concrete beam retrofitted by composite patches [5054-28] K. Kim, C. Chung, H. Kim High-speed weigh-in-motion measurement with Bragg grating sensors [5054-30] K. Kim, S. Cho, B. Bae SESSION 6 LARGE OPTICS AND HEXAPODS CHAIR: Benjamin K. Henderson Actively controlled thin-shell space optics [5054-31] K. Denoyer, E. Flint, J. Main, J. Lindler
Control challenges for extremely large telescopes [5054-32] D. MacMartin Compact lightweight six-axis point-and-hold positioning system [5054-33] J. Hall, G. Pettit, J. Lindler, E. Anderson, E. Flint Hybrid struts with smart piezoactuators for high-dynamic parallel kinematics [5054-34] R. Neugebauer, W. Drossel, H. Roscher SESSION 7 SMART STRUCTURES DEVICES CHAIR: Eric H. Anderson Application of amplified piezoelectric actuators to the construction of gas valves [5054-36] P. Bouchilloux, R. Le Letty, N. Lhermet, G. Patient, F. Claeyssen, M. Lang Latching valve control using ferromagnetic shape memory alloy actuators [5054-37] A. du Plessis, A. Jessiman, G. Muller, M. van Schoor Temperature-dependent skyhook control of HMMWV suspension using a fail-safe magnetorheological damper [5054-38] Y. Liu, F. Gordaninejad, C. Evrensel, U. Dogruer, M. Yeo, E. Karakas, A. Fuchs Multiplate magnetorheological fluid limited slip differential clutch [5054-39] B. Kavlicoglu, F. Gordaninejad, C. Evrensel, A. Fuchs, G. Korol SESSION 8 MR/COMPOSITES CHAIR: Wade J. Pulliam Enhanced-performance active fiber composites [5054-40] R. Gentilman, K. McNeal, G. Schmidt, A. Pizzochero, G. Rossetti Thin-layer magnetostrictive composite films for turbomachinery fan blade damping [5054-42] W. Pulliam, D. Lee, G. Carman, G. McKnight Self-healing structural composites with electromagnetic functionality [5054-43] T. Plaisted, A. Vakil Amirkhizi, D. Arbelaez, S. Nemat-Nasser, S. Nemat-Nasser SESSION 9 POSTER SESSION Vibration reduction on automotive shafts using piezoceramics [5054-44] H. Kunze, M. Riedel, K. Schmidt, E. Bianchini
Volume 5055 Smart Structures and Materials 2003: Smart Electronics, MEMS, BioMEMS, and Nanotechnology Chairs/Editors: Vijay K. Varadan, Laszlo B. Kish Conference Committee SESSION 1 SMART ELECTRONICS I CHAIRS: Ashok Srivastava, K. A. Jose Reconfigurable antennas and apertures: state of the art and future outlook [5055-1] J. Bernhard Noise: How important is it in the applications of MEMS and MOEMS? [5055-53] A. Selvarajan MEMS-based adaptive impedance matching network [5055-4] A. Srivastava Ultralow-power operational amplifier CMOS chip for monolithic integration with neural microprobes [5055-5] C. Zhang, T. Xin, A. Srivastava, P. Ajmera Design and analysis of a piezoelectric cantilever beam resonator [5055-6] M. Muriuki, W. Clark, Q. Chen, Q. Wang Bilateral interdigital CPW phase shifter using BaSrTiO3 thin film on poly-Si/Si substrate for electronically steerable antenna architecture [5055-7] H. Yoon, K. Vinoy, J. Abraham, V. Varadan SESSION 2 MICROSENSORS AND MEMS I CHAIRS: Pratul K. Ajmera, K. J. Vinoy Quantum computing with analog circuits: Hilbert space computing [5055-8] L. Kish Electroactive-polymer-based MEMS for aerospace and medical applications [5055-9] T. Xu, J. Su, Q. Zhang Design, simulation, and fabrication of a novel integrated microaccelerometer utilizing a post-CMOS fabrication technique [5055-10] I. Song, S. Kopparthi, P. Ajmera, A. Srivastava Polymer- and carbon nanotube-based MEMS accelerometer with modified organic electronics and thin film transistor [5055-11] V. Varadan SESSION 3 MICROSENSORS AND MEMS II CHAIRS: Laszlo B. Kish, Yongrae Roh, Yongjun Kwon Development of SH-SAW sensors for measurement of the properties of protein solutions [5055-12] Y. Roh, Y. Kwon, K. Kim, K. Koh, J. Kim Nanoparticle films made by gas phase synthesis: comparison of various techniques and sensor applications [5055-13] P. Heszler, L. Reyes, A. Hoel, L. Landström, V. Lantto, C. Granqvist
Combinatorial molecule counting by fluctuation-enhanced SAW and MOSFET sensors [5055-15] G. Schmera, L. Kish SESSION 4 BIOSENSORS, MEMS, AND SYSTEMS CHAIRS: Vijay K. Varadan, Narayan R. Aluru Microsensors and wireless system for monitoring epilepsy [5055-19] A. Whitchurch, B. Ashok, R. Kumaar, K. Sarukesi, K. Jose, V. Varadan Layer-by-layer nanoassembly of polyion and enzymes for production of micropatterns and nanoshells [5055-20] Y. Lvov, T. Cui, F. Hua, A. Patel, A. Antipov, A. Cordeiro, M. Prevot, G. Sukhorukov, R. Besser Noninvasive biosensor and wireless interrogating system for glucose in blood [5055-21] V. Varadan, A. Whitchurch, K. Sarukesi Design of a microfluidic cell using microstereolithography for electronic tongue applications [5055-22] S. Jacesko, T. Ji, J. Abraham, V. Varadan, J. Gardner SESSION 5 POLYMER MEMS FABRICATION CHAIRS: Vijar K. Varadan, Rishi Raj
Manufacturing and applications of polymer and ceramic MEMS from a novel material process for harsh environments [5055-23] L. Liew, R. Raj Microstereolithography for polymer-based MEMS [5055-24] V. Varadan, J. Xie UV-curable polymers with functionalized carbon nanotubes for MEMS [5055-26] J. Xie, N. Zhang, M. Guers, V. Varadan SESSION 6 CARBON NANOTUBES AND NANOSTRUCTURES CHAIRS: Jining Xie, Yanan Sha Formation of nanowires at the percolation threshold in rectangular 2D systems [5055-27] J. Schmelzer, S. Brown, M. Schulze, A. Dunbar, J. Partridge, S. Gourley, B. Ramsay, A. Wurl, M. Hyslop, R. Blaikie Large-scale microwave CVD system for synthesis of carbon nanotubes [5055-28] V. Varadan, J. Xie Power consumption of piezoelectric actuators with multiwalled carbon nanotube film deposition [5055-29] A. Modi, N. Koratkar Coiled carbon nanotubes: their structural and electrical properties [5055-30] J. Xie, K. Mukhopadyay, J. Yadev, V. Varadan SESSION 7 ACTUATORS CHAIRS: Mohammad Younis, Roopashree A. Tellakula Optical MEMS-based arrays [5055-32] P. Ruffin Micropumps, microturbines, and flow physics in microdevices [5055-33] M. Gad-el-Hak Composite thermal micro-actuator array for tactile displays [5055-34] E. Enikov, K. Lazarov
Arrays of micro-electrodes and electromagnets for processing of electro-magneto-elastic multifunctional composite materials [5055-35] J. Boyd, D. Lagoudas, C. Seo Fast-response variable-focusing micromirror array lens [5055-37] J. Boyd, G. Cho Oscillatory forced-convection-cooled compact SMA actuator [5055-38] R. Pachalla, D. Lagoudas, S. Girimaji Microvalve for SMA-based CHAD [5055-39] D. Lee, Q. Chen, D. Shin, G. Carman SESSION 8 SMART SYSTEM AND DEVICES I CHAIRS: Alan Tennant, K. J. Vinoy Piezoelectric energy harvesting using a diaphragm structure [5055-40] S. Kim, W. Clark, Q. Wang Strain energy harvesting for wireless sensor networks [5055-41] D. Churchill, M. Hamel, C. Townsend, S. Arms Distributed intelligence in wireless sensor networks [5055-42] V. Shirgur, V. Rao SESSION 9 SMART SYSTEMS AND DEVICES II CHAIR: K. A. Jose Wireless tuning fork gyroscope for biomedical applications [5055-43] J. Abraham, V. Varadan, A. Whitchurch, K. Sarukesi Progress in smart radar absorbers [5055-44] B. Chambers, A. Tennant Carbon nanotubes, fillers, and FSS as potential EM absorbers [5055-45] R. Tellakula, Y. Sha, K. Vinoy, K. Jose, V. Varadan, T. Shami, R. Jain, D. Lal, C. Neo Electrochemical and microwave characterization of novel 'microwave smart windows' based on poly(3,4-ethylenedioxythiophene) composite materials [5055-46] A. Barnes, R. Zhang, P. Wright, B. Chambers Self-repairing of composites [5055-54] C. Dry SESSION 10 POSTER SESSION VIACT (versatile integrated actuator) multitasking planar microrobot [5055-51] R. Dabbaj
Volume 5056 Smart Structures and Materials 2003: Smart Structures and Integrated Systems Chair/Editor: Amr M. Baz Conference Committee SESSION 1 AIRCRAFT AND HELICOPTER APPLICATIONS I CHAIR: Norman M. Wereley Development of smart vortex generators [5056-1] F. Geraci, J. Cooper, M. Amprikidis MEMS-based active skin for turbulent drag reduction [5056-2] R. Mani, D. Lagoudas, O. Rediniotis Effective cross-section distribution of anisotropic piezocomposite actuators for wing twist [5056-3] C. Cesnik, R. Park, R. Palacios SESSION 2 HEALTH MONITORING I CHAIR: Darryll J. Pines Health monitoring of adhesively bonded composite patch repair of aircraft structures using wavelet transforms of Lamb wave signals [5056-5] R. Gubbala, V. Rao Constructing of cure monitoring system with piezoelectric ceramics for composite laminate [5056-6] N. Oshima, K. Inoue, S. Motogi, T. Fukuda Sensitivity of Hilbert magnitude and phase to structural damage [5056-7] D. Pines, L. Salvino Multifunctional piezoelectric stiffness/energy sensor for monitoring the health of structures [5056-8] K. Wakha, M. Majed, A. Dasgupta, D. Pines SESSION 3 HEALTH MONITORING II CHAIR: Victor Giurgiutiu Fiber optic strain monitoring of textile GFRP during RTM molding and fatigue tests by using embedded FBG sensors [5056-9] T. Kosaka, K. Osaka, S. Nakakita, T. Fukuda Practical issues in self-repairing bolted joints [5056-10] D. Peairs, G. Park, D. Inman SESSION 4 HEALTH MONITORING III CHAIR: Gregory P. Carman Thermography technique for graphite/epoxy composite structures utilizing embedded thermal fiber optic sensors [5056-15] A. Stewart, G. Carman, W. Richards Development of embedded sensor models in composite laminates for structural health monitoring [5056-16] H. Kim, A. Ghoshal, A. Chattopadhyay, W. Prosser
Lamb wave generation with piezoelectric wafer active sensors for structural health monitoring [5056-17] V. Giurgiutiu SESSION 5 AIRCRAFT AND HELICOPTER APPLICATIONS II CHAIR: Alison B. Flatau Optimization of Lamb wave actuating and sensing materials for health monitoring of composite structures [5056-80] S. Kessler, C. Dunn Structural shape sensing for morphing aircraft [5056-20] G. Reich, B. Sanders Design and demonstration of a biomimetic wing section using lightweight piezoceramic composite actuator (LIPCA) [5056-21] S. Lim, S. Lee, H. Park, K. Yoon, N. Goo SESSION 6 MODELING AND CONTROL I CHAIR: Donald J. Leo Active coupling enhancement of piezoelectric networks for vibration delocalization of nearly periodic structures [5056-22] J. Zhang, K. Wang, H. Yu A comparative study on the effectiveness of piezoelectric patches for active composite panels with surface-mounted and embedded sensors and actuators [5056-23] R. Russ, M. Ghasemi-Nejhad Design of a smart panel with multiple decentralized units for the control of sound radiation/transmission [5056-24] P. Gardonio, E. Bianchi, S. Elliott Feedback-controlled oscillatory motor using ionic polymer materials [5056-25] K. Newbury, D. Leo Ride quality improvement ability of semi-active, active, and passive suspension systems for railway vehicles [5056-26] D. Wang, W. Liao SESSION 7 MODELING AND CONTROL II CHAIR: Balakumar Balachandran Adaptive resonant shunted piezoelectric devices for vibration suppression [5056-27] D. Niederberger, M. Morari, S. Pietrzko Compact biomimetic structure systems with LIPCA and battery-supported power control unit [5056-19] K. Park, K. Kim, J. Lee, T. Kang, H. Park, K. Yoon Active stabilization of thin-wall structures under compressive loading [5056-30] J. Welham, E. Calius, J. Chase Vibration isolation of beam structure using hybrid mount associated with rubber and piezoactuator [5056-31] S. Choi, S. Kim, S. Hong
SESSION 8 MODELING AND CONTROL III CHAIR: Norman M. Wereley Optimal design of curved actuator through high-performance computing [5056-32] S. Chung, S. Kim Development and demonstration of INSTAR: inertially stabilized rifle [5056-33] D. Brei, J. Vendlinski, D. Lindner, H. Zhu, C. LaVigna Finite element modeling and optimization of tube-shaped ultrasonic motors [5056-34] P. Bouchilloux, S. Cagatay, K. Uchino, B. Koc Mitigation of biodynamic response to vibratory and blast-induced shock loads using magnetorheological seat suspensions [5056-35] Y. Choi, N. Wereley A broadband vibration control using passive circuits [5056-36] G. Washington, M. Detrick, S. Kwak SESSION 9 SENSORS AND ESTIMATION I CHAIR: Kon-Well Wang Application of fiber Bragg grating sensors to real-time strain measurement of cryogenic tanks [5056-37] N. Takeda, T. Mizutani, K. Hayashi, Y. Okabe Detection of missing fastener based on vibration mode analysis using fiber Bragg grating (FBG) sensors [5056-39] A. Shimada, K. Urabe, Y. Kikushima, J. Takahashi, K. Kageyama SESSION 10 PIEZOACTUATORS I CHAIR: Diann E. Brei Energy-based efficiency of mechanized solid state actuators [5056-40] J. Joo, B. Sanders, G. Washington, J. Adams Piezoelectric ceramic fibers for active fiber composites: a comparative study [5056-42] X. Kornmann, C. Huber, H. Elsener Actuation development and evaluation for INSTAR: inertially stabilized rifle [5056-44] D. Brei, J. Vendlinski, M. Frecker, S. Bharti SESSION 11 PIEZOACTUATORS II CHAIR: Massimo Ruzzene Directional decoupling of piezoelectric sheet actuators for shape and vibration control of plate structures [5056-45] M. Philen, K. Wang Fatigue characteristics of lightweight piezocomposite actuators [5056-46] K. Kim, K. Park, N. Goo, H. Park, K. Yoon Manufacturing and testing of active composite panels with embedded piezoelectric sensors and actuators: wires out by molded-in holes [5056-47] M. Ghasemi-Nejhad, S. Pourjalali Smart composites based on piezoceramic tubes [5056-48] P. Wierach, S. Muehle, B. Nagel
Practical optimization of amplification mechanisms for piezoelectric actuators [5056-49] P. Loveday SESSION 12 ER/MR FLUIDS AND DEVICES I CHAIR: Andrew R. Johnson Shaking table tests on semi-active base-isolation system by magnetorheological fluid damper [5056-50] T. Hiwatashi, Y. Shiozaki, H. Fujitani, C. Minowa, S. Soda Theoretical comparison of different controlled damping devices for cable vibration mitigation [5056-51] F. Weber, G. Feltrin Position control system using ER clutch and piezoactuator [5056-52] S. Choi, S. Han Electrorheological clutches for a robotics application: dynamic, operational, and control considerations [5056-53] A. Johnson, R. Stanway, K. Tan, N. Sims A magnetorheological hydraulic actuator driven by a piezopump [5056-54] J. Yoo, J. Sirohi, N. Wereley, I. Chopra SESSION 13 SENSORS AND ESTIMATION II CHAIR: Yuji Matsuzaki An ultrasonic sampler and sensor platform for in situ astrobiological exploration [5056-55] Y. Bar-Cohen, X. Bao, Z. Chang, S. Sherrit SESSION 14 SPACE APPLICATIONS CHAIR: Allen J. Bronowicki Vibration and shape control of hinged light structures using electromagnetic forces [5056-58] Y. Matsuzaki, S. Miyachi, T. Sasaki Vibration control of a gossamer toroidal structure using smart material actuators and sensors [5056-59] A. Jha, D. Inman A layered vibration control strategy for space telescopes [5056-60] A. Bronowicki Onboard assembling of a large space structure by a torque-controlled space robot [5056-61] S. Nishida, T. Yoshikawa SESSION 15 ER/MR FLUIDS AND DEVICES II CHAIR: Andrew R. Johnson Study of a quarter model HMMWV suspension system using a magnetorheological fluid damper [5056-63] E. Karakas, F. Gordaninejad, C. Evrensel, M. Yeo, Y. Liu Time response of a controllable multiplate magnetorheological fluid limited slip differential clutch [5056-64] N. Cobanoglu, F. Gordaninejad, C. Evrensel, Y. Liu, B. Kavlicoglu, G. Korol Magnetorheological fluid damper dynamics: models and measurements [5056-65] C. Maranville, J. Ginder
SESSION 16 SHAPE MEMORY ACTUATORS/COMPOSITES CHAIR: Amr M. Baz Applications of cold hibernated elastic memory (CHEM) structures [5056-70] W. Sokolowski, S. Hayashi Design of space systems using shape memory alloys [5056-71] O. Godard, M. Lagoudas, D. Lagoudas Design of a novel composite cylinder reinforced with thin SMA layer [5056-72] S. Lee, C. Kim, M. Cho SESSION 17 POSTER SESSION In situ rock probing using the ultrasonic/sonic driller/corer (USDC) [5056-73] Z. Chang, S. Sherrit, X. Bao, Y. Bar-Cohen Piezoelectromechanical structures: a survey of basic concepts and methodologies [5056-75] F. dell'Isola, E. Henneke, M. Porfiri A new cluster control applied to composite board with stiffeners [5056-76] Y. Kikushima, A. Shimada, K. Yuse, T. Segawa, N. Tanaka Properties of orthogonal Stewart platforms [5056-77] J. McInroy Development of a semi-active friction device to reduce vibration by energy dissipation [5056-78] P. Buaka, P. Masson, P. Micheau Unstable-unit tensegrity plate: modeling and design [5056-79] R. Zaslavsky, M. de Oliveira, R. Skelton Robust reduced order model-based control of a smart vibrating cantilever beam [5056-81] R. Scott, M. Levesley, M. Brown
Volume 5057 Smart Structures and Materials 2003: Smart Systems and Nondestructive Evaluation for Civil Infrastructures Chair/Editor: Shih-Chi Liu Conference Committee Introduction SESSION 1 INFORMATION TECHNOLOGY APPLIED TO CIVIL INFRASTRUCTURE CHAIR: Shih-Chi Liu Wireless links between sensor-device control stations in long-span bridges [5057-1] F. Casciati, L. Faravelli, F. Borghetti Two-tiered wireless sensor network architecture for structural health monitoring [5057-2] V. Kottapalli, A. Kiremidjian, J. Lynch, E. Carryer, T. Kenny, K. Law, Y. Lei SESSION 2 NOVEL SENSORS I CHAIR: Jason S. Kiddy Smart Pebble: wireless sensors for structural health monitoring of bridge decks [5057-4] D. Watters, P. Jayaweera, A. Bahr, D. Huestis, N. Priyantha, R. Meline, R. Reis, D. Parks Three-dimensional microwave imaging technology for damage detection of concrete structures [5057-5] Y. Kim, L. Jofre, F. De Flaviis, M. Feng Intelligent bridge maintenance system using MEMS and network technology [5057-6] S. Aoki, Y. Fujino, M. Abe Design of experiments optimization of embedded MEMS sensors in composites for structural health monitoring [5057-7] A. Tayebi, M. Ul Hoque Fiber-reinforced composites as self-diagnosis materials for memorizing damage histories [5057-8] Y. Okuhara, B. Jang, H. Matsubara, M. Sugita SESSION 3 NDE FOR CIVIL SYSTEMS I CHAIR: Irving J. Oppenheim Development of a MEMS device for acoustic emission testing [5057-9] D. Ozevin, S. Pessiki, A. Jain, D. Greve, I. Oppenheim Ultrasonic characterization of steel rods for health monitoring of civil structures [5057-10] P. Rizzo, M. Palmer, F. Lanza di Scalea Propagation of guided Lamb waves in concrete repaired with composite plates [5057-11] K. Luangvilai, L. Jacobs, J. Qu Detection of rebar delamination using modal analysis [5057-12] D. Blodgett SESSION 4 DATA INTERROGATION AND ANALYSIS I CHAIR: Akira Mita, Charles R. Farrar Locating and quantifying structure damage using spatial wavelet packet signature [5057-14] C. Chang, Z. Sun
Experimental verification for damage detection strategies of multistory buildings based on vibration monitoring [5057-15] T. Hamamoto Damage diagnosis of a building structure using support vector machine and modal frequency patterns [5057-16] A. Mita, H. Hagiwara Quantitative health monitoring of bolted joints using piezoceramic actuator-sensor [5057-17] S. Ritdumrongkul, M. Abe, Y. Fujino, T. Miyashita A software tool for graphically assembling damage identification algorithms [5057-18] D. Allen, J. Clough, H. Sohn, C. Farrar Application of frequency domain ARX models and extreme value statistics to damage detection [5057-19] T. Fasel, H. Sohn, C. Farrar Identification of unusual events in multichannel bridge monitoring data using wavelet transform and outlier analysis [5057-20] P. Omenzetter, J. Brownjohn, P. Moyo SESSION 5 SHAPE MEMORY ALLOY APPLICATIONS CHAIR: Reginald DesRoches Application of SMA rod to exposed-type column base in smart structural system [5057-21] H. Tamai, K. Miura, Y. Kitagawa, T. Fukuta Experimental study on enhancement of self-restoration of concrete beams using SMA wire [5057-22] Y. Sakai, Y. Kitagawa, T. Fukuta, M. Iiba Properties of large-diameter shape memory alloys under cyclical loading [5057-23] R. DesRoches, J. McCormick SESSION 6 PASSIVE, ACTIVE, OR SEMIACTIVE DAMPING DEVICES CHAIR: Genda Chen Characteristics of piezoelectric damper in smart structural system [5057-25] Y. Kitagawa, M. Takeshita, H. Tamai, K. Miura Semiactive control of a steel frame with piezoelectric friction dampers [5057-26] G. Chen, C. Chen Amplitude-dependent frequency and damping identification of bridge cables with MR dampers in different setups [5057-27] Y. Duan, Y. Ni, J. Ko, Z. Chen MR damping system on Dongting Lake cable-stayed bridge [5057-83] Z. Chen, X. Wang, J. Ko, Y. Ni, B. Spencer, G. Yang Multivariable adaptive fuzzy control for nonlinear building-MR damper systems [5057-29] L. Zhou, C. Chang SESSION 7 HEALTH MONITORING OF CONSTRUCTED SYSTEMS CHAIRS: A. Emin Aktan, Felix H. Wu Recommendations for intelligent bridge monitoring systems: architecture and temperature-compensated bootstrap analysis [5057-30] G. Lloyd, M. Wang, X. Wang, J. Love
Distinctions between intelligent manufactured and constructed systems and a new discipline for intelligent infrastructure hypersystems [5057-84] A. Aktan Field validation of a wireless structural monitoring system on the Alamosa Canyon Bridge [5057-34] J. Lynch, A. Sundararajan, K. Law, A. Kiremidjian, E. Carryer, H. Sohn, C. Farrar Monitoring of the new Årsta railway bridge using traditional and fiber optic sensors [5057-35] M. Enckell-El Jemli, R. Karoumi, F. Lanaro Health monitoring system for Dafosi cable-stayed bridge [5057-32] Y. Zhu, Y. Fu, W. Chen, S. Huang, K. Bennett SESSION 8 SYSTEM IDENTIFICATION AND HEALTH MONITORING OF CIVIL SYSTEMS CHAIR: Ming L. Wang Formulation of an uncertainty model relating modal parameters and environmental factors by using long-term monitoring data [5057-37] J. Ko, K. Chak, J. Wang, Y. Ni, T. Chan Time synchronization algorithms for wireless monitoring system [5057-38] Y. Lei, A. Kiremidjian, K. Nair, J. Lynch, K. Law Health monitoring of railroad tracks by wavelet analysis [5057-42] J. McNamara, M. Palmer, F. Lanza di Scalea Automatic modal identification of cable-supported bridges instrumented with a long-term monitoring system [5057-39] Y. Ni, K. Fan, G. Zheng, T. Chan, J. Ko Diagnostic system for structural damage and degradation: damage identification based on a mode parameter and wave propagation [5057-41] K. Tsuchimoto, T. Ikeshita, Y. Kitagawa Identifying dynamic parameters of a structure using simplex method [5057-40] S. Wang, H. Li, D. Li SESSION 9 NOVEL SENSORS II CHAIR: Daniele Inaudi Development of state sensors for civil engineering structures [5057-45] L. Novak, K. Grizzle, S. Wood, D. Neikirk Energy scavenging for sensor applications using structural strains [5057-46] J. Ayers, D. Greve, I. Oppenheim Fiber-reinforced composites as self-diagnosis materials for concrete structures [5057-47] H. Kumagai, K. Shiba, M. Suzuki, M. Sugita, H. Matsubara SESSION 10 SENSOR TECHNOLOGY FOR HEALTH MONITORING CHAIR: Sharon Wood EXPO '02, Piazza Pinocchio: monitoring visitor live loads [5057-48] M. Cerulli, D. Posenato, D. Inaudi, B. Glisic, S. Vurpillot Structural health monitoring system using FBG-based sensors for a damage-tolerant building [5057-49] H. Iwaki, K. Shiba, N. Takeda
N-SCAN: new vibromodulation system for detection and monitoring of cracks and other contact-type defects [5057-51] D. Donskoy, A. Ekimov, E. Luzzato, J. Lottiaux, S. Stoupin, A. Zagrai Continuous coaxial cable sensors for monitoring of RC structures with electrical time domain reflectometry [5057-52] G. Chen, H. Mu, D. Pommerenke, J. Drewniak SESSION 11 NDE FOR CIVIL STRUCTURES II CHAIR: Jan-ming Ko Online location of a break in water distribution systems [5057-53] J. Liang, D. Xiao, X. Zhao, H. Zhang Experiments in ultrasonic flaw detection using a MEMS transducer [5057-54] A. Jain, D. Greve, I. Oppenheim Characterization of soil properties using elastic and electromagnetic waves [5057-55] G. Cho, S. Lee, T. Kwon Quantitative validation testing of magnetoelastic corrosion sensing for bridge cables [5057-56] V. Singh, G. Lloyd, M. Wang Remote state monitoring system for Hongcaofang Crossroad Bridge [5057-31] Y. Fu, Y. Zhu, W. Chen, S. Huang, K. Bennett SESSION 12 FIBER OPTIC SENSOR TECHNOLOGY FOR HEALTH MONITORING AND NDE CHAIR: Chrisopher S. Baldwin Full-scale testing results of structural damage detection using long-gage fiber Bragg gratings and modal analysis [5057-58] S. Calvert, J. Conte, B. Moaveni, W. Schulz, R. de Callafon Distributed Brillouin fiber optic strain monitoring applications in advanced composite materials [5057-60] F. Bastianini, M. Cargnelutti, A. Di Tommaso, M. Toffanin Distributed strain and temperature measurement of a beam using fiber optic BOTDA sensor [5057-61] I. Kwon, C. Kim, M. Choi Carbon fiber sensor for monitoring integrity of concrete piles [5057-63] H. Inada, K. Ishii, Y. Sugimura Parameters affecting the quality of acquired signals for the global health monitoring of mobile bridges using fiber optic polarimetric sensors [5057-64] A. Asundi, P. Neo Tien Song SESSION 13 MODELING AND ANALYSIS OF SMART SYSTEMS CHAIR: Darryll J. Pines More transparent neural network approach for modeling nonlinear hysteretic systems [5057-65] J. Pei, A. Smyth Robust control law for a friction-based semiactive controller of a two-span bridge [5057-28] N. Luo, J. Rodellar, R. Villamizar, J. Vehi
SESSION 14 HEALTH MONITORING AND NDE METHODS CHAIR: Chung Bang Yun A civil structural monitoring system based on fiber grating sensors [5057-68] Y. Zhang, H. Cai, R. Pastore, J. Ju, D. Zeng, Z. Yin, H. Cui Feasibility study of wave analysis for delamination detection of thick laminated composite beams [5057-69] W. Lestari, P. Qiao, G. Song Crack depth determination in concrete by ultrasound diffusion [5057-70] S. Ramamoorthy, Y. Kane, J. Turner Vibration-based method to detect prestress loss in beam-type bridges [5057-71] J. Kim, Y. Ryu, C. Yun SESSION 15 DATA INTERROGATION AND ANALYSIS II CHAIRS: Akira Mita, Charles R. Farrar Singularity detection for structural health monitoring using Holder exponents [5057-74] A. Robertson, C. Farrar, H. Sohn Stochastic optimization techniques for NDE of bridges using vibration signatures [5057-76] J. Yi, M. Feng Damage detection of a structural health monitoring system for a seven-story seismic isolated building [5057-77] R. Yoshimoto, A. Mita, K. Okada, H. Iwaki, M. Shiraishi Application of probabilistic neural network and static test data to the classification of bridge damage patterns [5057-78] B. Yan, A. Miyamoto Corrosion damage evaluation of prestressed beams using an inverse wave propagation method [5057-67] F. Carrión, A. Torres-Acosta, J. Quintana, G. Mullins, R. Sen SESSION 16 POSTER SESSION Optimal monitoring of water distribution systems [5057-81] J. Liang, D. Xiao, H. Zhang, X. Zhao Automated management for pavement inspection system (AMPIS) [5057-85] H. Chung, R. Girardello, T. Soeller, M. Shinozuka Performance analysis and visualization of electric power systems [5057-86] X. Dong, M. Shinozuka Fragility analysis of transportation networks [5057-87] Y. Murachi, M. Orikowski, X. Dong, M. Shinozuka