Table of Contents

Preface and Organizing Committee

Chapter 1: The Basic of Mechanics and Research Methods

Research on Control Effectiveness of Semi-Active MR-TMD to some Coal GasManufacturing PlantA.Z. Yan, Q. Kong and J.J. Lu 3Direct Tensile Strength Measurement of ConcreteM.I. Khan 9Dynamic Simulation and Test for the Valve Train DynamicsC.Y. Guan, Y.M. Chen and W.J. Qin 15Occluded Object Tracking Based on Mean Shift and Accumulation Error SuppressionH. Lu, H.S. Li, S.M. Fei and W.F. Cao 20Studies on Stability of Peanut Mango MilkC.S. Zhang, Q.L. Yang, J.C. Mou, Z.Q. Liu, L.N. Yu, J. Sun and J. Bi 25Application Study of Wa Nationality Totem Symbol of Lincang in Modern Furniture DesignW.J. Li, R.B. Hu, X. Ye, N. Li and H. Chen 29Rolling Element Defect Diagnosis Based on Local Mean DecompositionT. He, X.D. Liu, Y.C. Shan and Q. Pan 33Study on the FCG Prediction Model Based on Materials LCF DamageL. Chen, L.X. Cai and D. Yao 38Study on Composite Model for Vibro-Replacement Stone Column Foundation by FiniteElement MethodS.J. Fu, C.C. Zhu and Z.K. Huang 43The Application of Interval Analysis Method in the Stability AnalysisS.S. Hao, X. Xi, S.Y. Qu and W.P. Shi 48Stress Distribution Rule of Reinforced Concrete Specimen under Uniaxial TensionJ.X. Zhang, X.Z. Guo, S.G. Zhuo and C.A. Tang 53Analysis on Long-Span Bridge Seismic Response in Multi-Dimensional and Multi-PointModeC.H. Zhang and J.W. Dai 58Experimental Study on Impact Compression and Spliting of GraniteW.P. Wang, Y.L. Hu, X.T. Ren, Y.B. Xiong and L. Ying 62Research on Lower Muscle Strength Feature for Elite Speed Skaters in High Speed GlidingX. Wang 67Effect of the Stress Balance on Determination of Rock Dynamic Fracture Toughness UsingHoled-Cracked Flattened Brazilian DiscS. Zhang and X.W. Li 71Preparation of Ni-Coated SiC Ceramic Composite Powder by Electroless PlatingH. Yao, G.L. Zhu and Y.Z. Wang 77Corrosion Behavior of Electroless Deposited Fe-Zn CoatingX.R. Wang, J. Wu and X.G. Hu 81Study on the Vibro-Acoustic Characteristics of a Vibration Isolation Mass Structure withComposite BracesD. Jia, F.Z. Pang, X.C. Yin and Y. Xi 85New Results of Buckling and Postbuckling Behaviors for Fiber-Reinforced Composite ShearDeformable Anisotropic Laminated Cylindrical Shell Subjected to TorsionZ.M. Li 89Simulation Analysis of the Tensile Process on Sheet SampleY.L. Bai, D.Y. You, G.Q. Lu and C.X. Liu 92Calculation and Analysis of 2-D Thermal Stress Field in Induction Motor with CompoundCage Rotor under Different LoadJ.C. Cao, R.C. Qian and W.L. Li 97

The Sharp Indentation for Identifying Constitutive Relationship of Metallic MaterialsB. Yao, L.X. Cai and C. Bao 101Evaluation of the Steep Slope Stability Based on Theory of GPS Monitoring AnalysisR.S. Wang and L.W. Guo 108Difference and Application of Matrix Displacement Method and Finite Element Method inthe Truss Structure AnalysisH. Cheng and X.C. Yan 112Mechanism of Work Hardening of Mn13 after Asynchronous Cold RollingY.F. Wang, C.M. Qiu and H.C. Sun 118Recent Developments of Material Deformation MeasurementQ.H. Tian, L.P. Yan, T. Yang and B.Y. Chen 122Detection for the Automatic Transmission of the Tractor Based on SpectroscopicTechnologyL.D. Chen 129Edge Drop Constituent Analysis of Cold Rolled StripG.H. Yang, J. Zhang and J.G. Cao 134The Existence of Positive Periodic Solution for a Class of Functional Differential Equationwith Multi-DelaysG.H. Fan, Y.C. Dong, L.H. Yi and J. Xia 138Research on Influence of Flexible Parts Rigidity to Passenger Car Exhaust Systems ModalS.L. Yuan, W.C. Zhang, Z.E. Liu, C. Wang and D.Y. Fu 141Design and Finite Element Analysis in Hydraulic Retarder Bracket Based on ANSYSX.W. Li, C.Y. Li, X.F. Zhao, Z.T. Li and J.Q. Wei 146Study on Stability of High Embankments under Complicated Stress ConditionsS.C. Liu 150Kinematical Analysis on the Technology of Overhead Smash between Badminton andTennisB. Zhang 158Studies on MAaximum Hydrostatic Testing Pressure for New PipelineP.C. Chen, H. Zhang and H.J. Wang 162Noether Symmetry and First Integral of Discrete Nonconservative and NonholonimicHamiltoinian SystemX.Z. Wang, J.L. Fu and C.R. Li 167Response Analysis on Asymmetric Twin Tower Building with Large Bases Subjected toSeismic ActionQ.F. Wang, J. Yao, L. Cao, J.B. Xie and C.L. Guo 174One Numerical Simulation Method and its Applications for Fatigue Crack GrowthL. Chen, L.X. Cai, X.W. Huang and C. Bao 180Carbonation of High Strength ConcreteM.I. Khan 186

Chapter 2: Dynamics and Vibration

Numerical Simulation of Cu-Cu Interface Thermal Resistance by Utilizing LaserPhotothermal MethodQ.Z. Zhang, G. Wu, Z.Y. Pang, J.Z. Chen, G.H. Li and K. Bi 195Seismic Control Research of Longitudinal Floating Bridge Based on MR DamperM.G. Yang and K. Ouyang 201Model Test Research of the Influences of Rock-Fall Impaction on Accelerations of the Cut-and-Cover Tunnel StructureY.S. Wang, K.Y. Zhang, J.H. Tang and D. Liang 206Structure Design and Finite Element Analysis of Airborne Equipment Integrated MountingShelfX.Y. Chen and N. Zhao 212Microstructure and Mechanical Properties of a Rapid Directionally Solidified Ti47Al AlloyR.R. Chen, H.S. Ding, J.J. Guo, Y.Q. Su and H.Z. Fu 217

b Materials and Computational Mechanics

An Impact Analysis of Turbine Guide Bearing Stiffness on Rotating Parts TransverseVibration CharacteristicsY. Zhu, X.D. Lai and L.F. Wang 222Dynamic Responses of a Simply Supported Bridge to Moving Vehicle LoadsJ.H. Lin 231Research on Technological Parameters of Laser CladdingZ.T. Gao and M.H. Zhang 236Study on Flow-Induced Vibration Characteristics of Hydraulic Hoist of Large-SpanUpwelling Radial Steel GateZ.H. Gao, G.H. Yan, P. Liu, F.Z. Chen and F.M. Lv 241Dynamic Analysis of Axially Loaded Beams under Arbitrary Transverse ForceY. Zhang, L. Chen, J.K. Zhao and C.L. Peng 247Mechanics of Hairspring in Mehanical Watch MovementL.H. Xie and R.X. Du 252Effects of Process Conditions on Mechanics Properties of Micro-Foaming PP/GFCompositesW. Gong, Y. He, C. Zhang, J.H. Zhu and L. He 256Structural Fatigue Analysis on Expansion Joints of Diversion Penstock of HydropowerStationJ. Dong and G.H. Yan 262Study on Properties of Al2O3 -CaO-CaF2 Slag SystemK.W. Peng, P. Zhang, J.G. Xie and H.L. Ma 269A Novel Simplified and High-Precision Inverse Dynamics Model for Magneto-RheologicalDamperZ.Y. Zhang, C.X. Huang, X. Liu and X.H. Wang 273Kinetic Analysis of Hydraulic Mount of Vehicular Engine Based on Fluid-StructureInteractionZ.J. Xu and Z.X. Yu 279Finite Element Analysis of Ice-Cone InteractionG. Wang and C. Yu 283Nonlinear Seismic Analysis of Masonry Infilled RC Frame StructuresX.Y. Gong and J.W. Dai 288Stability of a Supported Cylinder in Axial FlowJ.D. Jin and N. Li 295The Numerical Study of Concrete Mesostructures Effect on Ballistic Responses inPenetration ProblemsW.F. Xu, X.C. Huang, Z.M. Hao, Y. Wang, Y.M. Xia and Y. Yao 299Study on Model of Thermal Crown of Single-Stand Irreversible Foil MillL. Hao, H.S. Di and D.Y. Gong 303Control Final Cooling Temperature on High Strength of the Pipeline Radio Yield InfluenceY.J. Ma, X. He and G.L. Zhang 310Structure and Property of ZnO Content with Tb3+ Doped Zinc Aluminum Phosphate GlassC.N. Fu, H.W. Yang, J.J. Wa, C.H. Lai, Y.M. Lee, C.S. Hsu and P.C. Yang 315Study on in-Plane Bending Vibration of a Combined Ring-BeamJ.C. Xing and L.Z. Xu 319The FOPS Design of Wheel Loader Cabin Based on Topology OptimizationX.M. Wu, W.B. Li and C. Liu 323An Investigation into the Earthquake Reaponses of Special-Shaped Arch BridgesC.H. Kou, M.C. Yang, S.W. Ma and T.T. Wu 328Sol-Gel Derived Titania/Hydroxyapatite Layer on Titanium SubstrateW.Y. Wang, Y. Wu, J.P. Xie, G. Lu, X.M. Dong and H.W. Yu 332Temperature Distribution and Operating Efficiency in Rectangular Cold CrucibleDirectional Solidifying Ti46Al0.5W0.5Si AlloysJ.R. Yang, R.R. Chen, H.S. Ding, J.J. Guo, Y.Q. Su, F. Huang and H.Z. Fu 335Aero-Elastic Active Control Modeling via Improved POD MethodX.J. Wang and M. Xu 339The Noise-Induced Chaotic Transition in a Vibro-Impact OscillatorJ.Q. Feng, T. Wang and W. Xu 347

Applied Mechanics and Materials Vols. 117-119 c

Study on Useful Concrete Elastic-Plastic Constitutive ModelH. Wang, C. Jin, H. Yuan and X.Z. Xia 351Numerical Simulation of the Reverse Plugging of a Thin Plate Irradiated by Long PulsedLaserY.X. Yan, Y.H. Yin and Y.Z. Chen 356Effects of Rare Earth La on Microstructures, Mechanical Properties and Sliding WearBehavior of High-Aluminium Zinc Foundry Alloy ZA30D.X. Yang, J.P. Xie, A.Q. Wang and W.Y. Wang 360Research about Numerical Integration Method for Structural Dynamic Response in RealTime on-Line TestN. Ge, H.B. Chen, Y.P. Su and X.G. Wang 364Response of Two-Disk Rotor with Squeeze Film Dampers and its Variation with ParametersT. Sun, W.Y. Qin and X.D. Jiao 369Experimental Study on CFRP-Bonded Steel Plates with Thickness Reduction UsingUnderwater EpoxyX. Chen, Y. Kitane and Y. Itoh 373Research on Interface Structure and Fracture Mechanism of Diffusion Bonding of TitaniumAlloy/Cu/Stainless SteelS.Y. Liu, G.B. Liu, Z.H. Heng and K. Xu 380Comprehensive Recycling of Construction WasteJ.F. Huang, Q.B. Liang, H. Wang, S.Y. Xu, L.S. Zhang and Y. Xing 385Dynamics Analysis of the Bar-Type Piezoelectric Motor StatorH.Y. Li and L.Z. Xu 390Evaluation of the Mechanical Properties of Copper Thin Film and Copper Bulk at theNano-Scale by NanoindenterJ.C. Huang and Y.J. Weng 394Grain Growth Behaviors of Multicrystalline Silicon during Cold Crucible ContinuousCastingF. Huang, R.R. Chen, J.J. Guo, H.S. Ding, Y.Q. Su, J.R. Yang and H.Z. Fu 398Investigation on Mechanical Properties of Pulsed Nd:YAG Laser Welding on AISI 304Stainless Steel to AISI 1008 SteelS. Shamsudin and P. Chee Yoon 402Reinforcement Phase of Situ TiC with the Laser Surface Alloying on Steel C1045W.Y. Wang, P. Wang, J.P. Xie, G. Lu, X.M. Dong and H.W. Yu 409

Chapter 3: Solid Mechanics

The Performance and Stre