table environments 2019 price list · 2020-03-16 · x and y fixed 58 flip 60 adjustable height 61...

TABLE ENVIRONMENTS

2019 PRICE LISTversion #110819

2019 PRICE LIST 3

table of contents

Essential Information 3

TablesLosa seated height 6Losa counter and bar height 8Sala occasional 10

Surfacessurface and edge overview 14edge profile overview 15surface shapes, dimensions, seating capacity 16Wilsonart laminate finishes by number 18Wilsonart laminate finishes by name 20Formica laminate finishes by number 22Formica laminate finishes by name 24PVEA and PVKN round, square, squircle, rectangle 26PVEA and PVKN conference: boat, racetrack, oval, arc trapezoid, arc rectangle 28PVEA and PVKN media tops: half arc end, half boat, bullet, trapezoid 30PVEA quarter round, half round, crecent, trapezoid, corner-angled, corner-curved, 31

corner-extended curved front, corner-120 degree, wedgeVNEA round, square, squircle, rectangle 32VNEA conference: boat, racetrack, oval 34VNEA media tops: half arc end, half boat, bullet, trapezoid 35UREA,URER, URBN, URND, UPER urethane edge tops 36

BasesT fixed, single and double column 40

nesting 42nesting adjustable height 44adjustable height 46

C fixed 53nesting 54adjustable height 56

X and Y fixed 58flip 60adjustable height 61four column 62

disc fixed 64adjustable height 65

laptop and occasional 66conference, under table media base and media walls 68post and frame bases 84

Power/data + Wire Managementpower supply location chart 93power/data modules (in alphabetical order) 94wire management 118grommets 120modesty panels 122

Accessorieslocks 125credenzas 126lectern and misc accessories 128

General InformationTerms & Conditions 131Table Care and Maintenance 134Environmental Statement & Solutions 135

table of contents

2019 PRICE LIST 2019 PRICE LIST4 5

Minimum order / Freight chargeOrders for $4,000 or more list (contiguous U.S.): freight and minimum order charges includedOrders less than $4000 list (contiguous U.S.)Zone 1 $180 netZone 2 $240 net

Special ChargesUrethane minimum set up mold charge for orders with less than 10 pieces of the same color: $200 net per color per orderCustom metal finish: contact [email protected] for a quote

Lead Time6-8 weeks from the receipt of a clean, credit approved order

Please send purchase orders to [email protected]

Symphony Contact Information phone 866-507-7795 fax 888-683-0007 [email protected] www.SymphonyTables.com

essential information

tables


height dimensions model no.

PVA 3mm PVC

Grade A list

PVB 3mm PVC

Grade B list

PVC 3mm PVC

Grade C list29" seated (S) 24 x 60* TLLOS24060S __ __ 1,380 1,470 1,670

24 x 72* TLLOS24072S __ __ 1,450 1,550 1,77024 x 96* TLLOS24096S __ __ 1,610 1,720 1,97024 x 120** TLLOS24120S __ __ 2,730 2,820 3,100

30 x 60 TLLOS30060S __ __ 1,490 1,550 1,77030 x 72 TLLOS30072S __ __ 1,560 1,670 1,91030 x 96 TLLOS30096S __ __ 1,840 1,960 2,24030 x 120 TLLOS30120S __ __ 3,090 3,180 3,490




For complete model number:1. insert 2 letter edge code:PV - 1.25 thick 3mm edgeLA - 1.25 thick self edge laminateLD - 2.00 thick self edge laminate

2. insert 1 letter laminate grade code:A - grade A laminateB - grade B laminateC - grade C laminate

Losa vertical wire manage with removeable cover in 1 end panel basemodel # OBOLOSWM1EP - $300 list

Losa vertical wire manager with removeable cover in both end panel basesmodel # OBOLOSWM2EP - $600 list

Losa vertical wire manager with removeable cover in 1 middle support panelmodel # OBLOSWM1MP - $330 list

PLEASE NOTE THAT SOME SOFT PLUG AND ALL HARDWIRED WHIPS WILL NOT FIT INSIDE THE PANEL BASE WITH THE VERTICAL WIRE MANAGEMENT COVER. THE DEPTH OF THE CHANNEL IS 0.625".

*24" Losa tables up to 96" long come with (1) modesty panel centered under the top if you would like power centered on the table then you will need to specify an additional stretcher. **A 24 x 120" long table will be a 2 piece top with one stretcher on each side of the middle support panel centered under the top, if you would like to have power centered on the table them please add (2) additional stretchers, one for each side.

Tables over 96" long will have a 2 piece top and middle support panel with stretchers running on either side of the middle support panel under the top.

Please contact [email protected] to make sure that your power and/or wire managment solution will work with the Losa table specification. We are able to modify this table with a custom solution to fit your projects needs.

Losa tables that are 120" or longer will have a 2 piece top

LAA 1.25"

laminate self edge

Grade A list

LAB 1.25"

laminate self edge

Grade B list

LAC 1.25"

laminate self edge

Grade C list

LDA 2" laminate self edge

Grade A list

LDB 2" laminate self edge

Grade B list

LDC 2" laminate self edge

Grade C list1,520 1,620 1,850 1,690 1,820 2,0901,600 1,710 1,960 1,790 1,940 2,2301,770 1,910 2,200 1,990 2,160 2,4902,920 3,030 3,350 3,190 3,340 3,730

1,640 1,760 2,020 1,840 1,980 2,2901,740 1,880 2,160 1,940 2,100 2,4202,010 2,170 2,480 2,200 2,370 2,7303,290 3,410 3,770 3,560 3,710 4,130

2,010 2,150 2,440 2,350 2,520 2,8802,190 2,340 2,660 2,440 2,710 3,1203,620 3,740 4,120 4,150 4,330 4,8203,990 4,110 4,510 4,550 4,750 5,280

2,070 2,210 2,510 2,380 2,520 2,8802,300 2,460 2,820 2,480 2,670 3,0704,040 4,160 4,570 4,590 4,790 5,3204,330 4,470 4,920 4,880 5,090 5,670

2,070 2,520 2,880 2,400 2,550 2,9202,300 2,620 3,010 2,510 2,670 3,0704,040 4,160 4,570 4,590 4,790 5,3204,330 4,470 4,920 4,880 5,090 5,670

Losa wire management mouse hole (1) stretcher at the top / centermodel # OBOLOSWMMHS - $20 list

Losa wire management mouse hole (1) in the end panel at the top / centermodel # OBOLOSWMHET - $20 list

Losa wire management mouse hole (1) in the end panel at the bottom / centermodel # OBOLOSWMHEB - $20 list

Formica + Wilsonart HPL laminate finish grades listed on pages 18-25. For additional laminate grades, contact Symphony

tablesLosa seated height

tablesLosa seated height


height dimensions model no.

PVA 3mm PVC

Grade A list

PVB 3mm PVC

Grade B list

PVC 3mm PVC

Grade C list24 x 60* TLLOS24060 __ __ __ 1,470 1,570 1,79024 x 72* TLLOS24072 __ __ __ 1,550 1,660 1,89024 x 96* TLLOS24096 __ __ __ 1,720 1,840 2,12024 x 120** TLLOS24120 __ __ __ 2,860 2,960 3,280

30 x 60 TLLOS30060 __ __ __ 1,580 1,700 1,95030 x 72 TLLOS30072 __ __ __ 1,670 1,800 2,06030 x 96 TLLOS30096 __ __ __ 1,960 2,100 2,40030 x 120 TLLOS30120 __ __ __ 3,220 3,340 3,680




For complete model number:1. insert table height codeC - 36" counter height tableH - 42" bar height table

3. insert 1 letter laminate grade code:A - grade A laminateB - grade B laminateC - grade C laminate

2. insert 2 letter edge code:PV - 1.25 thick 3mm edgeLA - 1.25 thick self edge laminateLD - 2.00 thick self edge laminate

C - 36" counter height tableH - 42" bar height table

*24" Losa tables up to 96" long come with (1) modesty panel centered under the top if you would like power centered on the table then you will need to specify an additional stretcher. **A 24 x 120" long table will be a 2 piece top with one stretcher under the top on each side of the middle support panel, if you would like to have power centered on the table them please add (2) additional stretchers, one for each side.

Tables over 96" long will have a 2 piece top and a middle support panel with stretchers running on either side of the middle support panel.

Please contact [email protected] to make sure that your power and/or wire managment solution will work with the Losa table specification. We are able to modify this table with a custom solution to fit your projects needs.

Losa tables that are 120" or longer will have a 2 piece top

Losa vertical wire manage with removeable cover in 1 end panel basemodel # OBOLOSWM1EP - $300 list

Losa vertical wire manager with removeable cover in both end panel basesmodel # OBOLOSWM2EP - $600 list

Losa vertical wire manager with removeable cover in 1 middle support panelmodel # OBLOSWM1MP - $330 list

PLEASE NOTE THAT SOME SOFT PLUG AND ALL HARDWIRED WHIPS WILL NOT FIT INSIDE THE PANEL BASE WITH THE VERTICAL WIRE MANAGEMENT COVER. THE DEPTH OF THE CHANNEL IS 0.625".

tablesLosa counter and bar height

LAA 1.25"

laminate self edge

Grade A list

LAB 1.25"

laminate self edge

Grade B list

LAC 1.25"

laminate self edge

Grade C list

LDA 2" laminate self edge

Grade A list

LDB 2" laminate self edge

Grade B list

LDC 2" laminate self edge

Grade C list1,610 1,730 1,980 1,800 1,950 2,2501,710 1,830 2,110 1,910 2,080 2,4001,890 2,050 2,370 2,130 2,320 2,6903,060 3,190 3,550 3,370 3,530 3,960

1,750 1,880 2,170 1,970 2,140 2,4701,870 2,020 2,330 2,090 2,260 2,6202,160 2,320 2,670 2,350 2,550 2,9403,450 3,590 3,980 3,750 3,920 4,380

2,150 2,290 2,600 2,510 2,700 3,1002,330 2,500 2,860 2,700 2,910 3,3503,780 3,920 4,340 4,360 4,570 5,1104,170 4,310 4,750 4,800 5,010 5,600

2,200 2,400 2,740 2,510 2,700 3,1002,450 2,640 3,030 2,660 2,870 3,3104,210 4,360 4,810 4,410 5,050 5,6404,530 4,700 5,200 5,140 5,380 6,010

2,200 2,400 2,740 2,510 2,700 3,1002,450 2,640 3,030 2,660 2,870 3,3104,210 4,360 4,810 4,410 5,050 5,6404,530 4,700 5,200 5,140 5,380 6,010

Losa wire management mouse hole (1) stretcher at the top / centermodel # OBOLOSWMMHS - $20 list

Losa wire management mouse hole (1) in the end panel at the top / centermodel # OBOLOSWMHET - $20 list

Losa wire management mouse hole (1) in the end panel at the bottom / center model # OBOLOSWMHEB - $20 list


tablesLosa counter and bar height


shape dimension height model no. A B C A B C

cylinder 18 15 TLSAL180015 __ G __ 800 840 940 940 990 1,08024 15 TLSAL240015 __ G __ 900 950 1,060 1,050 1,110 1,22030 15 TLSAL300015 __ G __ 1,130 1,190 1,370 1,330 1,400 1,54036 15 TLSAL360015 __ G __ 1,300 1,370 1,590 1,540 1,620 1,78018 20 TLSAL180020 __ G __ 830 870 980 970 1,020 1,12024 20 TLSAL240020 __ G __ 970 1,020 1,140 1,130 1,180 1,30030 20 TLSAL300020 __ G __ 1,180 1,240 1,400 1,350 1,420 1,57036 20 TLSAL360020 __ G __ 1,400 1,470 1,650 1,580 1,660 1,83018 24 TLSAL180024 __ G __ 860 900 1,010 1,000 1,040 1,15024 24 TLSAL240024 __ G __ 1,020 1,070 1,210 1,180 1,240 1,37030 24 TLSAL300024 __ G __ 1,230 1,290 1,450 1,400 1,460 1,62036 24 TLSAL360024 __ G __ 1,480 1,550 1,750 1,660 1,750 1,930

oval 20x36 15 TLSAL203615 __ G __ 1,860 1,950 2,190 2,010 2,110 2,34022x40 15 TLSAL224015 __ G __ 1,960 2,060 2,320 2,120 2,230 2,47024x46 15 TLSAL244615 __ G __ 2,180 2,290 2,570 2,360 2,480 2,75020x36 20 TLSAL203620 __ G __ 1,990 2,090 2,340 2,140 2,250 2,49022x40 20 TLSAL224020 __ G __ 2,060 2,160 2,440 2,220 2,330 2,59024x46 20 TLSAL244620 __ G __ 2,320 2,440 2,730 2,510 2,630 2,92020x36 24 TLSAL203624 __ G __ 2,070 2,170 2,440 2,220 2,330 2,59022x40 24 TLSAL224024 __ G __ 2,160 2,270 2,560 2,320 2,440 2,72024x46 24 TLSAL244624 __ G __ 2,420 2,540 2,850 2,600 2,730 3,030

square corner cube 18x18 15 TLSAL181815 __ G __ 840 880 990 990 1,040 1,14024x24 15 TLSAL242415 __ G __ 970 1,020 1,140 1,130 1,190 1,30030x30 15 TLSAL303015 __ G __ 1,130 1,190 1,330 1,300 1,360 1,50036x36 15 TLSAL363615 __ G __ 1,320 1,390 1,550 1,500 1,580 1,74018x18 20 TLSAL181820 __ G __ 880 920 1,040 1,030 1,080 1,19024x24 20 TLSAL242420 __ G __ 1,020 1,070 1,210 1,180 1,240 1,37030x30 20 TLSAL303020 __ G __ 1,230 1,290 1,450 1,400 1,460 1,62036x36 20 TLSAL363620 __ G __ 1,410 1,480 1,670 1,600 1,680 1,86018x18 24 TLSAL181824 __ G __ 900 950 1,060 1,050 1,100 1,21024x24 24 TLSAL242424 __ G __ 1,070 1,120 1,270 1,230 1,290 1,43030x30 24 TLSAL303024 __ G __ 1,280 1,340 1,520 1,450 1,520 1,68036x36 24 TLSAL363624 __ G __ 1,530 1,610 1,800 1,710 1,800 1,990

square corner rectangle 24x30 15 TLSAL243015 __ G __ 1,130 1,190 1,320 1,310 1,370 1,50024x48 15 TLSAL244815 __ G __ 1,280 1,340 1,490 1,480 1,550 1,69024x30 20 TLSAL243020 __ G __ 1,270 1,330 1,420 1,400 1,470 1,60024x48 20 TLSAL244820 __ G __ 1,500 1,580 1,610 1,580 1,660 1,80024x30 24 TLSAL243024 __ G __ 1,380 1,450 1,480 1,450 1,520 1,66024x48 24 TLSAL244824 __ G __ 1,640 1,720 1,670 1,640 1,720 1,870

S = no plinth base P = 3/4" plinth base

For complete model number:1. insert base code: S = no plinth baseP = 3/4" plinth base

2. insert laminate grade code: A = grade A laminateB = grade B laminateC = grade C laminate


tablesSala occasional


surfaces


PVC

vinyl

urethane

Standard particleboardThe standard core consists of 1 .125” thick, 45 lb. industrial grade western particleboard. This meets or exceeds requirements of ANSA A 208 1979, 1-M-3 and is TECO tested per ASTM D-1037. The core is laminated with a .040” thick high pressure laminate top, while the underside has a .035” Polybak Ultra backing sheet applied.

High Pressure Laminate (HPL) surfaceSymphony produces tops with virtually any laminate. Most Formica and Wilsonart laminates are grade A, B, or C (see listings). However, some Formica and Wilsonart laminates plus laminates from other suppliers can exceed grade C pricing plus have extended lead times. To verify pricing and lead-times, please email [email protected] for assistance.

To check availability or to order any samples please contact the laminate companies directly.www.Formica.com 800-FORMICAwww.Nevamar.com 800-638-4380www.Wilsonart.com 800-433-3222www.Pionite.com 800-746-6483

Edges 3mm PVC (PVEA)Edge is banded with 3-mm extruded synthetic PVC molding.The molding top and bottom edges feature a slight radius, adding comfort. The 90 degree corners create a seamless table to table fit.

3mm PVC Knife (PVKN)Edge is banded with .462 high rigid 3-mm extruded synthetic PVC molding. The top edge molding features a slight radius, adding comfort.The bottom of the edge features exposed MDF core sanded smooth with a wax coating, the slanted edge has a 20 degree angle. The 90 degree corners create a seamlesstable to table fit.* Symphony can paint the PVKN edge instead of having raw particle board for an additional cost and lead time. Email [email protected] for more information.

Vinyl (VNEA)Edges are banded with solid vinyl convex "T" molding, 1.5" radius corners The edge is hammered into the side of the top.

Urethane (UREA, URER, URNB, URND, UPER)Molded seamless edge chemically bonded to the core or substrate makes is ideal for sanitary environments.Resilient, self sealing plus resist impacts and abrasions. Standard edge is hard. Soft version available at same price. Just specify “soft” edge. No-Drip edge (URND) is shaped toprovide no-drip benefits (spills should be wiped up immediately to prevent staining).Ergo urethane "user side" with eased 3mm on "approach and sides of top" (UPER)

*Urethane minimum set up mold charge for orders with less than 10 pieces of the same color: $200 net per color per order

Edge Code Profile Corners Height Depth Standard FinishesPVC PVEA eased 90° 1.19" 0.125"

PVKN knife 90° 1.19" 2"

vinyl VNEA eased 1.5" radius 1.19" 0.125"

urethane UPER

ergo (user side, remaining sides are 3mm PVC

eased)

90° 1.25" 1.75"

UREA eased .75" radius 1.25" 1.25"

URBN bullnose .75" radius 1.25" 1.25"

URND no drip .75" radius 1.25" top, highest point of urethane edge 1.3" 1.5"

URER ergo .75" radius 1.25" 1.75"

To match Wilsonart laminates: Alabaster, Amber Cherry, Antique White, Asian Night, Asian Sand, Atlantis, Bannister Oak, Beigewood, Biltmore Cherry, Black, Blond Echo, Brazilwood, Brighton Walnut, Cafelle, Cocobala, Coffee Bean, Columbian Walnut, Designer White, Dove Grey, Ebony Recon, Empire Mahogany, Field Elm, Figured Mahogany, Fonthill Pear, Frosty White, Fusion Maple, Graphite Nebula, Grey, Grey Elm, Grey Mesh, Hampton Walnut, Harvest Maple, High Line, Huntington Maple, Kensington Maple, Khaki Brown, Limber Maple, Linen, Manitoba Maple, Montana Walnut, Monticello Maple, Natural Almond, Nepal Teak, North Sea, Pebble, Pepperdust, Pinnacle Walnut, Platinum, River Cherry, Satin Stainless, Shadow, Skyline Walnut, Slate Grey, Solar Oak, Studio Teak, Tan Echo, Wallaby, Walnut Heights, White, Wild Cherry, Williamsburg Cherry, Windsor Mahogany, Zanzibar.

To match Fomica laminates: Almond, Amber Maple, Antique White, Black, Bleached Legno, Brite White, Dover White, Fog, Folkstone, Graphite, Graystone, Hard Rock Maple, Natural Maple, Neutral Twill, Platinum, Prestige Walnut, Pumice, Select Cherry, Stone Grafix, Storm, White

*Note that this list is subject to change at any time depending on the availability of the edge from the top plant or the edge manufacturer.

To match Wilsonart laminates: Black, Frosty White, Slate Grey, Fashion Grey To match Formica laminates: Fog

* Note that this list is subject to change at any time depending on the availability of the edge from our the plant or the edge manufacturer.

Black, Brownstone, Dove Gray, Folkstone, Khaki Brown, Light Beige

surfacessurface and egde overview

surfacesegde profile overview


shape A x B seats approximate weight (lbs)

shape A x B seats approximate weight (lbs)

round (RD) 24 dia. 2 18 racetrack (RA). ** 36 x 72 4 8130 dia. 2 28 ** 36 x 84 6 9536 dia. 3 41 ** 36 x 96 6-8 10842 dia. 4 55 2+ 36 x 120 8 13548 dia. 4-5 72 ** 42 x 72 6 9554 dia. 5 91 ** 42 x 96 8 12660 dia. 6-7 113 2+ 42 x 120 8 158

** 48 x 96 8-10 144square (SQ) 24 x 24 2 18 2+ 48 x 120 8-10 180

30 x 30 2 28 2+ 48 x 144 10 21636 x 36 4 42 2+ 48 x 168 10 25242 x 42 4 55 ** 60 x 96 8-10 18048 x 48 4 72 2+ 60 x 120 10-12 22560 x 60 6-8 113 2+ 60 x 144 10-12 270

2+ 60 x 168 12 315rectangle (RE) 18 x 48 1 27

* 18 x 60 2 34 boat (BO). ** 36 x 72 4 81* 18 x 72 2 41 ** 36 x 84 6 95* 18 x 84 2-3 48 2+ 36 x 96 6-8 108* 18 x 90 3 51 ** 42 x 96 8 126* 18 x 96 3 54 ** 48 x 96 8-10 144

24 x 30 1 23 2+ 48 x 120 8-10 18024 x 36 1 27 ** 60 x 96 8-10 18024 x 42 1 32 2+ 60 x 120 10-12 22524 x 48 1 36 2+ 60 x 144 10-12 270

* 24 x 60 2 45 2+ 60 x 168 12 315* 24 x 66 2 50* 24 x 72 2 54 oval (OV). ** 36 x 72 4 81* 24 x 84 2-3 63 ** 36 x 84 6 95* 24 x 90 3 68 ** 36 x 96 6-8 108* 24 x 96 3 72 2+ 36 x 120 8 135

30 x 36 2 34 ** 42 x 72 6 9530 x 42 2 40 ** 42 x 96 8 12630 x 48 2-4 45 ** 48 x 96 8-10 144

** 30 x 60 4 57 2+ 48 x 120 8-10 180** 30 x 66 4-6 62 2+ 48 x 144 10 216** 30 x 72 6 68 2+ 48 x 168 10 252** 30 x 84 2-3 79 ** 60 x 96 8-10 180** 30 x 90 3 85 2+ 60 x 120 10-12 225** 30 x 96 3 90 2+ 60 x 144 10-12 270

36 x 42 2 48 2+ 60 x 168 12 31536 x 48 2-4 54

** 36 x 60 4-6 68** 36 x 72 6-8 81** 36 x 84 6-8 95** 36 x 90 6-8 102** 36 x 96 8-10 1082+ 36 x 120 8-10 135 ** 42 x 60 6 79** 42 x 72 6-8 95** 42 x 84 6-8 111** 42 x 96 8-10 1262+ 42 x 120 8-10 1582+ 42 x 144 10 190** 48 x 72 6 108** 48 x 84 6-8 126** 48 x 96 8-10 1442+ 48 x 120 8-10 1802+ 48 x 144 10 2162+ 48 x 168 10 252** 60 x 96 8-10 1802+ 60 x 120 10-12 2252+ 60 x 144 10-12 2702+ 60 x 168 12 315

A

A

A

Seating capacity is a guide only. Capacity will vary according to seating width, design and layout. Capacity based on 30" minimum width per seat and use on all potential sides.

For pricing on custom size 3mm edge (PVEA) surfaces just use next largest standard size price. For unusual shapes and other special pricing, email [email protected] for assistance.

B

B

B

*** 120" - 144" two piece tops can be produced as one piece upon request with additional packaging and freight charges

A B

A B

* 1 support bar included** 2 support bars included2+ 2 piece top with bars + table lock set included

shape A x B x C shape A x B x C

quarter round (QR) 18 x 18 x 25.5 corner - extended (CE) 24 x 60 x 3624 x 24 x 34 curved front 24 x 72 x 36

30 x 30 x 42.5 24 x 60 x 4824 x 72 x 48

half round (HA) 18 x 3624 x 4830 x 60

24 x 36 x 60crescent (CR) 18 x 36 x 51 24 x 36 x 72

24 x 48 x 68 24 x 48 x 6024 x 60 x 94 24 x 48 x 7230 x 60 x 96

corner - 120 degree (12) 24 x 3624 x 4224 x 48

trapezoid (TR) 24 x 48 x 2130 x 60 x 2630 x 72 x 31

wedge (WE) 24 x 36 x 3024 x 42 x 3024 x 48 x 30

corner - angled (CA) 24 x 36 24 x 60 x 3024 x 4224 x 48

30 x 36 x 2430 x 42 x 2430 x 48 x 2430 x 60 x 24

corner - curved (CC) 24 x 3624 x 4224 x 48

A

A

B

B

B

A

B

A

AB

B

A

A

A

B

B

BA

C

A

A

A

B

C

A

A

B B

B

C

A

B

C

C

C

A

C

A

B

surfacesshapes, dimensions, weight, seating capacity

surfacesadditional shapes, dimensions


Lam No Laminate Name A B C 3mm edge Lam No Laminate Name A B C 3mm edge1500 Grey 60 std stock 4846 Morro Zephyr 60 *F1503 Putty 60 *F 4856 Cloud Zephyr 60 *R1530 Beige 60 *R 4857 Shadow Zephyr 60 *R1531 Light Beige 60 *R 4859 Spiced Zephyr 60 *R1570 White 60 std stock 4860K Silver Alchemy 7 *R1572 Antique White 60 std stock 4861K Gold Alchemy 7 *R1573 Frosty White 60 std stock 4862 Sandy Topaz 7 *R1595 Black 60 std stock 4869 Western White 60 *R1787 Oxide 60 *R 4871 Western Suede 60 *R2932 Almond Leather 60 *R 4876 Sheer Mesh 38 *R4142 Grey Glace 60 *R 4877 Grey Mesh 38 std stock4143 Neutral Glace 60 *R 4878 Pewter Mesh 38 *F4166 Pampas 60 *R 4879 Steel Mesh 38 *F4168 Grey Pampas 60 *R 4880 Carbon Mesh 38 *F4170 Beige Pampas 60 *R 4882 Oiled Soapstone 38 *F4588 Kalahari Topaz 7 *R 4883 Sable Soapstone 384589K Smoky Topaz 7 *R 4885 Green Soapstone 38 *R4621 White Nebula 60 *F 4886 Pearl Soapstone 38 *R4622 Grey Nebula 60 *F 4887 Tan Soapstone 38 *F4623 Graphite Nebula 60 std stock 4888 Rustic Sate 38 *R4630 Cloud Nebula 60 *R 4909 Ginseng Tea 604651 Navy Legacy 60 *R 4911 Soft Gold Mesh 38 *R4656 Bronze Legacy 60 *R 4912 Gilded Mesh 384663 Tawny Legacy 60 *R 4915 Tangerine 60 *R4667 Green Tigris 60 *R 4918 Sprout 60 *R4669 Natural Tigris 60 *R 4939K Vapor Strandz 18 *R4674 Evening Tigris 60 *F 4940K Astro Strandz 18 *R4745 Maroochy Brush 60 4941K Cosmic Strandz 18 *F4746 Woolamai Brush 60 4996 High Rise 38 *R4779 Pewter Brush 60 *F 7039K Windsor Mahogany 78 std stock4783 White Tigris 60 *R 7040K Figured Mahogany 78 std stock4794 Windswept Bronze 60 *R 7054 Wild Cherry 60 std stock4795 Windswept Pewter 60 *R 7061 Natural Pear 60 *F4796 Burnished Chestnut 60 *R 7110K Montana Walnut 78 std stock4810 Titanium EV 60 *R 7122K Empire Mahogany 7 std stock4811 Silicon EV 60 *R 7209K Nepal Teak 78 std stock4813 Nickel EV 60 *R 7806 Bannister Oak 60 std stock4814 Tungsten EV 60 *R 7816 Solar Oak 60 std stock4820 Carbon EV 60 *F 7850 Beigewood 60 std stock4823 Antique Brush 60 *F 7909 Fusion Maple 60 std stock4830K Satin Stainless 18 std stock 7911 Manitoba Maple 60 std stock4841 Desert Zephyr 60 *F 7919K Amber Cherry 78 std stock4842 Canyon Zephyr 60 *R 7921 Tuscan Walnut 38 *F4843 Misted Zephyr 60 *R 7922 Brighton Walnut 7 std stock4844 Loden Zephyr 60 *R 7923K Versailles Anigre 7 *F4845 Twilight Zephyr 60 *R 7924K Biltmore Cherry 7 std stock

Laminate Finish Grade


std stock - flex 3mm PVC edge stocked & available for any size/shape top at standard lead time*F - Flexible PVEA 3mm PVC edge available for an upcharge and a possible extended lead time depending on top sizes and quantity*R - Rigid PVEA 3mm PVC edge available for an upcharge and a possible extended lead time depending on top sizes and quantity -

note that the rigid form prevents the use of this edge on curved or round topsPlease note that edge banding availability is subject to change. Email [email protected] to check pricing and lead time prior to ordering for *F and *R edge banding.

Lam No Laminate Name A B C 3mm edge Lam No Laminate Name A B C 3mm edge7925 Monticello Maple 38 std stock 7987 Palisades Oak 38 *R7928 Castle Oak 38 *F 7988 Hibiscus Cherry 387929 Huntington Maple 38 std stock 7989 Persian Cherry 387933K Cafelle 7 std stock 7990 Mission Maple 38 *R7935K Shaker Cherry 7 7991 Neowalnut 38 *R7936K Williamsburg Cherry 7 std stock 7992 Pinnacle Walnut 38 std stock7937 River Cherry 38 std stock 7993 Florence Walnut 38 *R7938 New Age Oak 38 *R 7994 Lowell Ash 38 *R7939K Blond Echo 18 std stock 7995 Sterling Ash 38 *R7941K Tan Echo 18 std stock 7996 Natural Recon 38 *R7942K Cocobala 7 std stock 7997 Ebony Recon 38 std stock7943K Colombian Walnut 7 std stock 7998K Low Line 187944K Madagascar 1 7999K Field Elm 12 std stock7945K Xanadu 18 *R 8200K White Driftwood 167946 Brazilwood 38 std stock 8201K Grey Elm 12 std stock7947K Rio 18 *R 8204K Weathered Char 16 *R7948K Mambo 7 *F 8205K Ebony Char 167949K Asian Night 18 std stock 8206K Saddle Oak 167951K Asian Sun 18 *R 8207K Branded Oak 16 *R7952K Asian Sand 18 std stock 8208K Fawn Cypress 16 *R7953 Harvest Maple 38 std stock 10734 Limber Maple 60 std stock7954 Natural Rift 38 *R 10745 Fonthill Pear 60 std stock7957K Zanzibar 78 std stock 10776 Kensington Maple 60 std stock7959K Hampton Walnut 78 std stock D12 Regimental Red 18 *R7960K Studio Teak 18 std stock D14 Port 60 *F7962K Aloe 18 *R D25 Atlantis 60 std stock7964K Skyline Walnut 12 std stock D30 Natural Almond 60 std stock7965K Walnut Heights 12 std stock D307 Hollyberry 60 *F7966K 5th Ave. Elm 12 *R D315 Platinum 60 std stock7967K Park Elm 12 *R D321 Brittany Blue 60 *F7968K Loft Oak 12 *R D327 Pepperdust 60 std stock7969K Warehouse Oak 12 D337 Pebble 60 std stock7970K High Line 18 std stock D354 Designer White 60 std stock7971K Uptown Walnut 12 *R D379 Indigo 60 *R7972K Truss Maple 12 D381 Fashion Grey 60 *F7973K Old Mill Oak 12 *R D403 White Sand 60 *R7975K Raw Chestnut 12 D417 Lapis Blue 60 *R7976K White Cypress 12 *R D427 Linen 60 std stock7977K White Barn 12 *R D431 Alabaster 60 std stock7980K Zebrawood 18 *F D439 Wallaby 60 std stock7981K Landmark Wood 12 *R D495 Coffee Bean 60 std stock7982 Buka Bark 38 *R D50 Khaki Brown 60 std stock7983 Boardwalk Oak 38 *R D90 North Sea 60 std stock7984 Mangalore Mango 38 *R D91 Slate Grey 60 std stock7985 Morelia Mango 38 *R D92 Dove Grey 60 std stock7986 Pasadena Oak 38 *R D96 Shadow 60 std stock



Please note: additonal laminates and finishes may be available with additional fees and/or extended lead timesContact Symphony for pricing and lead time information: [email protected] and specific finishes may be discontinued by Formica or Wilsonart. For the most up to date information, contact your Formica or Wilsonart representative.

surfacesWilsonart laminates by number + matching 3mm edges (PVEA)

surfacesWilsonart laminates by number + matching 3mm edges (PVEA)


Laminate Name Lam No A B C 3mm edge Laminate Name Lam No A B C 3mm edge5th Ave. Elm 7966K 12 *R Fawn Cypress 8208K 16 *RAlabaster D431 60 std stock Field Elm 7999K 12 std stockAlmond Leather 2932 60 *R Figured Mahogany 7040K 78 std stockAloe 7962K 18 *R Florence Walnut 7993 38 *RAmber Cherry 7919K 78 std stock Fonthill Pear 10745 60 std stockAntique Brush 4823 60 *F Frosty White 1573 60 std stockAntique White 1572 60 std stock Fusion Maple 7909 60 std stockAsian Night 7949K 18 std stock Gilded Mesh 4912 38Asian Sand 7952K 18 std stock Ginseng Tea 4909 60Asian Sun 7951K 18 *R Gold Alchemy 4861K 7 *RAstro Strandz 4940K 18 *R Graphite Nebula 4623 60 std stockAtlantis D25 60 std stock Green Soapstone 4885 38 *RBannister Oak 7806 60 std stock Green Tigris 4667 60 *RBeige 1530 60 *R Grey 1500 60 std stockBeige Pampas 4170 60 *R Grey Elm 8201K 12 std stockBeigewood 7850 60 std stock Grey Glace 4142 60 *RBiltmore Cherry 7924K 7 std stock Grey Mesh 4877 38 std stockBlack 1595 60 std stock Grey Nebula 4622 60 *FBlond Echo 7939K 18 std stock Grey Pampas 4168 60 *RBoardwalk Oak 7983 38 *R Hampton Walnut 7959K 78 std stockBranded Oak 8207K 16 *R Harvest Maple 7953 38 std stockBrazilwood 7946 38 std stock Hibiscus Cherry 7988 38Brighton Walnut 7922 7 std stock High Line 7970K 18 std stockBrittany Blue D321 60 *F High Rise 4996 38 *RBronze Legacy 4656 60 *R Hollyberry D307 60 *FBuka Bark 7982 38 *R Huntington Maple 7929 38 std stockBurnished Chestnut 4796 60 *R Indigo D379 60 *RCafelle 7933K 7 std stock Kalahari Topaz 4588 7 *RCanyon Zephyr 4842 60 *R Kensington Maple 10776 60 std stockCarbon EV 4820 60 *F Khaki Brown D50 60 std stockCarbon Mesh 4880 38 *F Landmark Wood 7981K 12 *RCastle Oak 7928 38 *F Lapis Blue D417 60 *RCloud Nebula 4630 60 *R Light Beige 1531 60 *RCloud Zephyr 4856 60 *R Limber Maple 10734 60 std stockCocobala 7942K 7 std stock Linen D427 60 std stockCoffee Bean D495 60 std stock Loden Zephyr 4844 60 *RColombian Walnut 7943K 7 std stock Loft Oak 7968K 12 *RCosmic Strandz 4941K 18 *F Low Line 7998K 18Desert Zephyr 4841 60 *F Lowell Ash 7994 38 *RDesigner White D354 60 std stock Madagascar 7944K 1Dove Grey D92 60 std stock Mambo 7948K 7 *FEbony Char 8205K 16 Mangalore Mango 7984 38 *REbony Recon 7997 38 std stock Manitoba Maple 7911 60 std stockEmpire Mahogany 7122K 7 std stock Maroochy Brush 4745 60Evening Tigris 4674 60 *F Mission Maple 7990 38 *RFashion Grey D381 60 *F Misted Zephyr 4843 60 *R





Laminate Name Lam No A B C 3mm edge Laminate Name Lam No A B C 3mm edgeMontana Walnut 7110K 78 std stock Silicon EV 4811 60 *RMonticello Maple 7925 38 std stock Silver Alchemy 4860K 7 *RMorelia Mango 7985 38 *R Skyline Walnut 7964K 12 std stockMorro Zephyr 4846 60 *F Slate Grey D91 60 std stockNatural Almond D30 60 std stock Smoky Topaz 4589K 7 *RNatural Pear 7061 60 *F Soft Gold Mesh 4911 38 *RNatural Recon 7996 38 *R Solar Oak 7816 60 std stockNatural Rift 7954 38 *R Spiced Zephyr 4859 60 *RNatural Tigris 4669 60 *R Sprout 4918 60 *RNavy Legacy 4651 60 *R Steel Mesh 4879 38 *FNeowalnut 7991 38 *R Sterling Ash 7995 38 *RNepal Teak 7209K 78 std stock Studio Teak 7960K 18 std stockNeutral Glace 4143 60 *R Tan Echo 7941K 18 std stockNew Age Oak 7938 38 *R Tan Soapstone 4887 38 *FNickel EV 4813 60 *R Tangerine 4915 60 *RNorth Sea D90 60 std stock Tawny Legacy 4663 60 *ROiled Soapstone 4882 38 *F Titanium EV 4810 60 *ROld Mill Oak 7973K 12 *R Truss Maple 7972K 12Oxide 1787 60 *R Tungsten EV 4814 60 *RPalisades Oak 7987 38 *R Tuscan Walnut 7921 38 *FPampas 4166 60 *R Twilight Zephyr 4845 60 *RPark Elm 7967K 12 *R Uptown Walnut 7971K 12 *RPasadena Oak 7986 38 *R Vapor Strandz 4939K 18 *RPearl Soapstone 4886 38 *R Versailles Anigre 7923K 7 *FPebble D337 60 std stock Wallaby D439 60 std stockPepperdust D327 60 std stock Walnut Heights 7965K 12 std stockPersian Cherry 7989 38 Warehouse Oak 7969K 12Pewter Brush 4779 60 *F Weathered Char 8204K 16 *RPewter Mesh 4878 38 *F Western Suede 4871 60 *RPinnacle Walnut 7992 38 std stock Western White 4869 60 *RPlatinum D315 60 std stock White 1570 60 std stockPort D14 60 *F White Barn 7977K 12 *RPutty 1503 60 *F White Cypress 7976K 12 *RRaw Chestnut 7975K 12 White Driftwood 8200K 16Regimental Red D12 18 *R White Nebula 4621 60 *FRio 7947K 18 *R White Sand D403 60 *RRiver Cherry 7937 38 std stock White Tigris 4783 60 *RRustic Sate 4888 38 *R Wild Cherry 7054 60 std stockSable Soapstone 4883 38 Williamsburg Cherry 7936K 7 std stockSaddle Oak 8206K 16 Windsor Mahogany 7039K 78 std stockSandy Topaz 4862 7 *R Windswept Bronze 4794 60 *RSatin Stainless 4830K 18 std stock Windswept Pewter 4795 60 *RShadow D96 60 std stock Woolamai Brush 4746 60Shadow Zephyr 4857 60 *R Xanadu 7945K 18 *RShaker Cherry 7935K 7 Zanzibar 7957K 78 std stockSheer Mesh 4876 38 *R Zebrawood 7980K 18 *F




surfacesWilsonart laminates by name

+ matching 3mm edges (PVEA)

surfacesWilsonart laminates by name + matching 3mm edges (PVEA)


Lam No Laminate Name A B C 3mm edge Lam No Laminate Name A B C 3mm edge

118 Finnish Oak 58 *F 2200 Dark Chocolate 58 *R204 Butcherblock Maple 58 2297 Terril 58 *R299 Ebony Oxide 58 *R 2770 Sarum Grey 58 *R300 Sail White Oxide 58 2962 Clementine 58303 Antique White Oxide 58 *R 3202 Otter 58 *R346 Natural Oak 58 *F 3209 Sol 58 *R459 Brite White 58 std stock 3453 Parquet Latte 58463 Sail White 58 *F 3485 Black Walnut 58 *F464 Graystone 58 std stock 3505 Storm Solidz 58 *R503 Stone Grafix 58 std stock 3517 Sand Crystall 58507 Folkstone Grafix 58 3526 Travertine 58515 Graphite Grafix 58 *F 3687 Autumn Indian Slate 58 *R692 Folkstone Celesta 58 *R 3690 Basalt Slate 58 *R756 Natural Maple 58 std stock 3692 Labrador Granite 58758 Blossom Cherrywood 58 3696 Shoji Screen 58 827 White Onyx 90 3698 Beluga Beige 58 *R837 Graphite 58 std stock 3699 Rattan Cane 58 *R839 Stop Red 58 *F 5281 Dogbone White 58845 Spectrum Red 58 *F 5323 Nocturne 58851 Spectrum Blue 58 *F 5342 Earth 58 *R858 Pumice 58 std stock 5349 Fossil 58 *R863 Myriad Ribbonwood 58 *F 5481 Oiled Olivewood 43 *R873 Ebony Ribbonwood 58 *F 5487 Oiled Walnut 58 *R899 Desert Beige 58 *F 5488 Smoky Brown Pear 58 *F902 Platinum 58 std stock 5489 Espresso Pear 58 *F909 Black 58 std stock 5875 Neutral Weft 58 *R912 Storm 58 std stock 5880 Earthen Warp 58 *R914 Marine Blue 58 *R 5881 Chocolate Warp 58 *R918 Neutral White 58 *F 5882 Citadel Warp 58 *R920 Almond 58 std stock 5883 Pecan Woodline 58 *F923 Surf 58 *F 5884 Chestnut Woodline 58 *R927 Folkstone 58 std stock 5886 Sorrel Cherry 43, 58 *F928 Mouse 58 *F 5887 Millennium Oak 58 *R929 Oyster Gray 58 *R 5904 Wild Cherry 43, 58 *F932 Antique White 58 std stock 6206 Planked Deluxe Pear 43, 58 *R933 Mission White 58 *F 6208 Glamour Cherry 43, 58 *F934 Pearl 58 *R 6209 Prestige Walnut 43 std stock949 White 58 std stock 6212 Wheat Strand 58 *F961 Fog 58 std stock 6226 Ivory Kashmire 58967 Hunter Green 58 6306 Wenge Strand 58 *R969 Navy Blue 58 *R 6307 Burnt Strand 58 *R1097 Citadel 58 *R 6314 Neo Cloud 581150 Vosges Pear 43 *F 6366 Paloma Dark Gray 58 *R1485 Chrome Yellow 58 6401 Natural Walnut 43, 58 *R1517 Eggplant 58 6402 Thermo Walnut 43 *F1519 Blackened Bronze 58 6417 Elemental Oxide 581520 Infinity 58 *R 6437 Chalked Knotty Ash 581994 Fox 58 *R 6438 Washed Knotty Ash 58 *R





Lam No Laminate Name A B C 3mm edge Lam No Laminate Name A B C 3mm edge6440 Smoked Knotty Ash 58 *F 7966 New Burgundy 586447 Sarum Duotex 58 *R 8751 Mojave 586448 Infinity Duotex 58 *R 8792 Winter Sky 58 *R6449 Charcoal Duotex 58 8793 Green Slate 586473 Folkstone Hex 58 8794 Enamel 586474 Storm Hex 58 8795 Matrix Blue 586475 Elemental Blue Steel 58 8814 Denim Twill 586698 Paloma Polar 58 *R 8820 Leaf Green 58 *R6729 Paloma Bisque 58 *R 8821 Just Blue 58 *R6901 Vibrant Green 58 *R 8824 White Drops 58 *R6902 Grenadine 58 8826 Neutral Twill 58 std stock6903 Cassis 58 *R 8827 Sarum Twill 58 *F6907 Amarena 58 8828 Earthen Twill 58 *F6920 Mineral Spa 58 *R 8829 Graphite Twill 58 *F6925 Maple Woodline 58 *R 8830 Elemental Concrete 586926 Smoky Walnut Woodline 58 *R 8831 Elemental Stone 58 *R6930 Natural Cane 58 *R 8839 Ashen Ribbonwood 58 *F6932 Macchiato Walnut 58 *F 8841 White Ash WR *F6942 Charcoal Boomerang 58 8842 Weathered Ash WR *F7008 Acajou Mahogany 43 58 *R 8843 Natural Ash WR7011 African Limba 43, 58 *F 8844 Aged Ash WR *F7012 Amber Maple 58 std stock 8845 Bleached Legno 58 std stock7014 Colorado Slate 58 *R 8846 Oiled Legno 58 *F7018 Navy Grafix 58 *R 8847 Jarrah Legno 587022 Natural Canvas 58 8848 Blackened Legno 58 *F7197 Dover White 58 std stock 8849 Natural Teak 58 *F7213 Earth Wash 58 *R 8858 Just Rose 587264 Lime Stone 58 8905 Waxed Maple 587265 Sand Stone 58 8906 Danish Maple 58 *R7267 Concrete Stone 58 8917 Rolled Steel 587284 Figured Annigre 58 *F 8918 Blackened Steel 587285 Violin Figured Annigre 58 *F 8919 Bronzed Steel 587288 Ginger Root Maple 58 *F 8956 Bubble Science 587481 Natural Birch 58 *R 8957 Bubble Organic 587484 Cherry Birch 58 *R 8958 Bubble Art 587494 Carrara Envision 58 *R 9011 Zebrano 58 *R7583 Victorian Mahogany 58 9012 Ebony 58 *R7708 Flax Gauze 58 *R 9256 Auburn Maple 587734 Jamocha Granite 58 9257 Glow Maple 587735 Portico Marble 58 *R 9283 Walnut Riftwood NG *F7737 Natural Cherry 58 *F 9285 White Twill 58 *F7738 Cognac Maple 58 *F 9311 Silver Oak Herringbone 587739 Cocoa Maple 58 *F 9312 Planked Urban Oak 58 *F7747 Pencil Wood 58 *R 9476 White Ice Granite 437759 Select Cherry 43 std stock 9480 Salvage Planked Elm 587812 MDF Solidz 58 *R 86992 Hard Rock Maple 58 std stock7813 Cardboard Solidz 58 *R7897 Spectrum Green 58




surfacesFormica laminates by number + matching 3mm edges (PVEA)

surfacesFormica laminates by number



Laminate Name Lam No A B C 3mm edge Laminate Name Lam No A B C 3mm edgeAcajou Mahogany 7008 43 58 *R Dogbone White 5281 58African Limba 7011 43, 58 *F Dover White 7197 58 std stockAged Ash 8844 WR *F Earth 5342 58 *RAlmond 920 58 std stock Earth Wash 7213 58 *RAmarena 6907 58 Earthen Twill 8828 58 *FAmber Maple 7012 58 std stock Earthen Warp 5880 58 *RAntique White 932 58 std stock Ebony 9012 58 *RAntique White Oxide 303 58 *R Ebony Oxide 299 58 *RAshen Ribbonwood 8839 58 *F Ebony Ribbonwood 873 58 *FAuburn Maple 9256 58 Eggplant 1517 58Autumn Indian Slate 3687 58 *R Elemental Blue Steel 6475 58Basalt Slate 3690 58 *R Elemental Concrete 8830 58Beluga Beige 3698 58 *R Elemental Oxide 6417 58Black 909 58 std stock Elemental Stone 8831 58 *RBlack Walnut 3485 58 *F Enamel 8794 58Blackened Bronze 1519 58 Espresso Pear 5489 58 *FBlackened Legno 8848 58 *F Figured Annigre 7284 58 *FBlackened Steel 8918 58 Finnish Oak 118 58 *FBleached Legno 8845 58 std stock Flax Gauze 7708 58 *RBlossom Cherrywood 758 58 Fog 961 58 std stockBrite White 459 58 std stock Folkstone 927 58 std stockBronzed Steel 8919 58 Folkstone Celesta 692 58 *RBubble Art 8958 58 Folkstone Grafix 507 58Bubble Organic 8957 58 Folkstone Hex 6473 58Bubble Science 8956 58 Fossil 5349 58 *RBurnt Strand 6307 58 *R Fox 1994 58 *RButcherblock Maple 204 58 Ginger Root Maple 7288 58 *FCardboard Solidz 7813 58 *R Glamour Cherry 6208 43, 58 *FCarrara Envision 7494 58 *R Glow Maple 9257 58Cassis 6903 58 *R Graphite 837 58 std stockChalked Knotty Ash 6437 58 Graphite Grafix 515 58 *FCharcoal Boomerang 6942 58 Graphite Twill 8829 58 *FCharcoal Duotex 6449 58 Graystone 464 58 std stockCherry Birch 7484 58 *R Green Slate 8793 58Chestnut Woodline 5884 58 *R Grenadine 6902 58Chocolate Warp 5881 58 *R Hard Rock Maple 86992 58 std stockChrome Yellow 1485 58 Hunter Green 967 58Citadel 1097 58 *R Infinity 1520 58 *RCitadel Warp 5882 58 *R Infinity Duotex 6448 58 *RClementine 2962 58 Ivory Kashmire 6226 58Cocoa Maple 7739 58 *F Jamocha Granite 7734 58Cognac Maple 7738 58 *F Jarrah Legno 8847 58Colorado Slate 7014 58 *R Just Blue 8821 58 *RConcrete Stone 7267 58 Just Rose 8858 58Danish Maple 8906 58 *R Labrador Granite 3692 58Dark Chocolate 2200 58 *R Leaf Green 8820 58 *RDenim Twill 8814 58 Lime Stone 7264 58Desert Beige 899 58 *F Macchiato Walnut 6932 58 *F





Laminate Name Lam No A B C 3mm edge Laminate Name Lam No A B C 3mm edgeMaple Woodline 6925 58 *R Sail White Oxide 300 58Marine Blue 914 58 *R Salvage Planked Elm 9480 58Matrix Blue 8795 58 Sand Crystall 3517 58MDF Solidz 7812 58 *R Sand Stone 7265 58Millennium Oak 5887 58 *R Sarum Duotex 6447 58 *RMineral Spa 6920 58 *R Sarum Grey 2770 58 *RMission White 933 58 *F Sarum Twill 8827 58 *FMojave 8751 58 Select Cherry 7759 43 std stockMouse 928 58 *F Shoji Screen 3696 58Myriad Ribbonwood 863 58 *F Silver Oak Herringbone 9311 58Natural Ash 8843 WR Smoked Knotty Ash 6440 58 *FNatural Birch 7481 58 *R Smoky Brown Pear 5488 58 *FNatural Cane 6930 58 *R Smoky Walnut Woodline 6926 58 *RNatural Canvas 7022 58 Sol 3209 58 *RNatural Cherry 7737 58 *F Sorrel Cherry 5886 43, 58 *FNatural Maple 756 58 std stock Spectrum Blue 851 58 *FNatural Oak 346 58 *F Spectrum Green 7897 58Natural Teak 8849 58 *F Spectrum Red 845 58 *FNatural Walnut 6401 43, 58 *R Stone Grafix 503 58 std stockNavy Blue 969 58 *R Stop Red 839 58 *FNavy Grafix 7018 58 *R Storm 912 58 std stockNeo Cloud 6314 58 Storm Hex 6474 58Neutral Twill 8826 58 std stock Storm Solidz 3505 58 *RNeutral Weft 5875 58 *R Surf 923 58 *FNeutral White 918 58 *F Terril 2297 58 *RNew Burgundy 7966 58 Thermo Walnut 6402 43 *FNocturne 5323 58 Travertine 3526 58Oiled Legno 8846 58 *F Vibrant Green 6901 58 *ROiled Olivewood 5481 43 *R Victorian Mahogany 7583 58Oiled Walnut 5487 58 *R Violin Figured Annigre 7285 58 *FOtter 3202 58 *R Vosges Pear 1150 43 *FOyster Gray 929 58 *R Walnut Riftwood 9283 NG *FPaloma Bisque 6729 58 *R Washed Knotty Ash 6438 58 *RPaloma Dark Gray 6366 58 *R Waxed Maple 8905 58Paloma Polar 6698 58 *R Weathered Ash 8842 WR *FParquet Latte 3453 58 Wenge Strand 6306 58 *RPearl 934 58 *R Wheat Strand 6212 58 *FPecan Woodline 5883 58 *F White 949 58 std stockPencil Wood 7747 58 *R White Ash 8841 WR *FPlanked Deluxe Pear 6206 43, 58 *R White Drops 8824 58 *RPlanked Urban Oak 9312 58 *F White Ice Granite 9476 43Platinum 902 58 std stock White Onyx 827 90Portico Marble 7735 58 *R White Twill 9285 58 *FPrestige Walnut 6209 43 std stock Wild Cherry 5904 43, 58 *FPumice 858 58 std stock Winter Sky 8792 58 *RRattan Cane 3699 58 *R Zebrano 9011 58 *RRolled Steel 8917 58Sail White 463 58 *F




surfacesFormica laminates by name + matching 3mm edges (PVEA)

surfacesFormica laminates by name



shape dimension model no. A B C A B C

round 18 SLRD18000PV _ _ 170 180 210 190 200 23024 SLRD24000PV _ _ 170 200 230 210 240 27030 SLRD30000PV _ _ 240 260 300 300 320 36036 SLRD36000PV _ _ 290 340 390 370 420 47042 SLRD42000PV _ _ 490 550 640 600 660 75048 SLRD48000PV _ _ 500 570 670 640 710 81054 SLRD54000PV _ _ 780 860 1,000 960 1,040 1,18060 SLRD60000PV _ _ 820 910 1,050 1,050 1,140 1,280

square 18 x 18 SLSQ18018PV _ _ 170 180 210 190 200 23024 x 24 SLSQ24024PV _ _ 170 200 230 210 240 27030 x 30 SLSQ30030PV _ _ 240 260 300 300 320 36036 x 36 SLSQ36036PV _ _ 290 340 390 370 420 47042 x 42 SLSQ42042PV _ _ 490 550 640 600 660 75048 x 48 SLSQ48048PV _ _ 500 570 670 640 710 81054 x 54 SLSQ54054PV _ _ 780 860 1,000 960 1,040 1,18060 x 60 SLSQ60060PV _ _ 820 910 1,050 1,050 1,140 1,280

sqircle 30 x 30 SLSC30030PV _ _ 240 260 300 300 320 36036 x 36 SLSC36036PV _ _ 320 350 410 400 430 49042 x 42 SLSC42042PV _ _ 530 550 640 640 660 75048 x 48 SLSC48048PV _ _ 550 570 670 690 710 81054 x 54 SLSC54054PV _ _ 830 860 1,000 1,010 1,040 1,18060 x 60 SLSC60060PV _ _ 860 910 1,050 1,090 1,140 1,280

rectangle 18 x 36 SLRE18036PV _ _ 220 250 290 260 290 33018 x 42 SLRE18042PV _ _ 250 280 330 300 330 38018 x 48 SLRE18048PV _ _ 250 280 330 300 330 380

* 18 x 54 SLRE18054PV _ _ 360 410 470 420 470 530* 18 x 60 SLRE18060PV _ _ 360 390 450 430 460 520* 18 x 66 SLRE18066PV _ _ 410 430 490 480 500 560* 18 x 72 SLRE18072PV _ _ 420 440 500 500 520 580* 18 x 84 SLRE18084PV _ _ 560 590 670 650 680 760* 18 x 90 SLRE18090PV _ _ 590 620 710 690 720 810* 18 x 96 SLRE18096PV _ _ 610 640 730 720 750 840

24 x 30 SLRE24030PV _ _ 220 230 270 270 280 32024 x 36 SLRE24036PV _ _ 240 250 300 290 300 35024 x 42 SLRE24042PV _ _ 270 280 320 330 340 38024 x 48 SLRE24048PV _ _ 290 300 350 360 370 420

* 24 x 54 SLRE24054PV _ _ 380 420 480 460 500 560* 24 x 60 SLRE24060PV _ _ 400 420 480 490 510 570* 24 x 66 SLRE24066PV _ _ 420 440 510 520 540 610* 24 x 72 SLRE24072PV _ _ 440 460 520 550 570 630* 24 x 84 SLRE24084PV _ _ 590 620 700 720 750 830* 24 x 90 SLRE24090PV _ _ 620 650 740 760 790 880* 24 x 96 SLRE24096PV _ _ 630 660 750 770 800 890

30 x 36 SLRE30036PV _ _ 300 320 370 370 390 44030 x 42 SLRE30042PV _ _ 320 340 400 400 420 48030 x 48 SLRE30048PV _ _ 340 360 420 430 450 510

** 30 x 54 SLRE30054PV _ _ 480 510 580 580 610 680

PVEA eased PVKN knife

For complete model number insert 2 character edge code: (PVEA for eased or PVKN for knife edge)

* 1 support bar included ** 2 support bars included 2+ 2 piece top with bars + table lock set included


rectangle ** 30 x 60 SLRE30060PV _ _ 480 520 590 590 630 700** 30 x 66 SLRE30066PV _ _ 530 570 650 650 690 770** 30 x 72 SLRE30072PV _ _ 550 590 670 690 730 810** 30 x 84 SLRE30084PV _ _ 830 870 990 990 1,030 1,150** 30 x 90 SLRE30090PV _ _ 860 900 1,020 1,030 1,070 1,190** 30 x 96 SLRE30096PV _ _ 860 910 1,030 1,040 1,090 1,210

36 x 42 SLRE36042PV _ _ 370 400 460 460 490 55036 x 48 SLRE36048PV _ _ 410 440 510 520 550 620

** 36 x 54 SLRE36054PV _ _ 590 620 710 710 740 830** 36 x 60 SLRE36060PV _ _ 600 630 720 740 770 860** 36 x 66 SLRE36066PV _ _ 610 690 780 760 840 930** 36 x 72 SLRE36072PV _ _ 620 700 790 780 860 950** 36 x 84 SLRE36084PV _ _ 930 1,000 1,130 1,120 1,190 1,320** 36 x 90 SLRE36090PV _ _ 980 1,040 1,180 1,180 1,240 1,380** 36 x 96 SLRE36096PV _ _ 1,000 1,050 1,190 1,220 1,270 1,4102+ 36 x 120 SLRE36120PV _ _ 1,240 1,300 1,470 1,510 1,570 1,7402+ 36 x 144 SLRE36144PV _ _ 1,240 1,300 1,490 1,560 1,620 1,810

42 x 48 SLRE42048PV _ _ 530 560 650 660 690 780** 42 x 54 SLRE42054PV _ _ 620 650 750 760 790 890** 42 x 60 SLRE42060PV _ _ 750 790 910 910 950 1,070** 42 x 66 SLRE42066PV _ _ 810 910 1,040 980 1,080 1,210** 42 x 72 SLRE42072PV _ _ 830 940 1,080 1,020 1,130 1,270** 42 x 84 SLRE42084PV _ _ 1,120 1,270 1,460 1,340 1,490 1,680** 42 x 90 SLRE42090PV _ _ 1,150 1,320 1,500 1,390 1,560 1,740** 42 x 96 SLRE42096PV _ _ 1,150 1,330 1,510 1,400 1,580 1,7602+ 42 x 120 SLRE42120PV _ _ 1,490 1,600 1,830 1,810 1,920 2,1502+ 42 x 144 SLRE42144PV _ _ 1,630 1,720 2,000 2,010 2,100 2,380

** 48 x 54 SLRE48054PV _ _ 750 790 910 910 950 1,070** 48 x 60 SLRE48060PV _ _ 750 790 910 930 970 1,090** 48 x 66 SLRE48066PV _ _ 810 940 1,080 1,010 1,140 1,280** 48 x 72 SLRE48072PV _ _ 810 940 1,080 1,030 1,160 1,300** 48 x 84 SLRE48084PV _ _ 1,100 1,270 1,460 1,350 1,520 1,710** 48 x 90 SLRE48090PV _ _ 1,140 1,320 1,500 1,410 1,590 1,770** 48 x 96 SLRE48096PV _ _ 1,150 1,330 1,510 1,440 1,620 1,8002+ 48 x 120 SLRE48120PV _ _ 1,570 1,650 1,880 1,930 2,010 2,2402+ 48 x 144 SLRE48144PV _ _ 1,660 1,750 2,030 2,090 2,180 2,4602+ 48 x 168 SLRE48168PV _ _ 2,120 2,230 2,550 2,620 2,730 3,0502+ 48 x 192 SLRE48192PV _ _ 2,410 2,540 2,910 2,990 3,120 3,490

** 60 x 66 SLRE60090PV _ _ 1,080 1,140 1,310 1,330 1,390 1,560** 60 x 72 SLRE60090PV _ _ 1,100 1,160 1,330 1,370 1,430 1,600** 60 x 84 SLRE60084PV _ _ 1,460 1,540 1,760 1,780 1,860 2,080** 60 x 90 SLRE60090PV _ _ 1,540 1,620 1,840 1,880 1,960 2,180** 60 x 96 SLRE60096PV _ _ 1,550 1,630 1,850 1,910 1,990 2,2102+ 60 x 120 SLRE60120PV _ _ 1,880 1,980 2,270 2,330 2,430 2,7202+ 60 x 144 SLRE60144PV _ _ 2,030 2,140 2,490 2,570 2,680 3,0302+ 60 x 168 SLRE60168PV _ _ 2,810 2,960 3,420 3,440 3,590 4,0502+ 60 x 192 SLRE60192PV _ _ 2,890 3,040 3,500 3,610 3,760 4,220


Additonal edge profiles and top dimensions are available. Please contact Symphony for details.

For complete model number insert 2 character edge code: (PVEA for eased or PVKN for knife edge)


surfacesPVEA 3mm eased edge and PVKN knife edge round, square, squircle and rectangle

surfacesPVEA 3mm eased edge and PVKN knife edge

rectangle (con’t)



boat ** 36 x 72 SLBO36072PV _ _ 670 700 790 830 860 950** 36 x 84 SLBO36084PV _ _ 950 1,000 1,130 1,140 1,190 1,320** 36 x 96 SLBO36096PV _ _ 1,000 1,050 1,190 1,220 1,270 1,4102+ 36 x 120 SLBO36120PV _ _ 1,300 1,370 1,540 1,570 1,640 1,810

** 42 x 96 SLBO42096PV _ _ 1,260 1,330 1,510 1,510 1,580 1,760

** 48 x 96 SLBO48096PV _ _ 1,280 1,350 1,530 1,570 1,640 1,8202+ 48 x 120 SLBO48120PV _ _ 1,680 1,770 1,990 2,040 2,130 2,350

** 60 x 96 SLBO60096PV _ _ 1,550 1,630 1,850 1,910 1,990 2,2102+ 60 x 120 SLBO60120PV _ _ 2,010 2,120 2,410 2,460 2,570 2,8602+ 60 x 144 SLBO60144PV _ _ 2,030 2,140 2,490 2,570 2,680 3,0302+ 60 x 168 SLBO60168PV _ _ 2,810 2,960 3,420 3,440 3,590 4,0502+ 60 x 192 SLBO60192PV _ _ 2,920 3,070 3,530 3,640 3,790 4,250

racetrack ** 36 x 72 SLRA36072PV _ _ 660 690 780 820 850 940** 36 x 84 SLRA36084PV _ _ 940 990 1,120 1,130 1,180 1,310** 36 x 96 SLRA36096PV _ _ 890 940 1,080 1,110 1,160 1,3002+ 36 x 120 SLRA36120PV _ _ 1,240 1,300 1,470 1,510 1,570 1,740

** 42 x 72 SLRA42072PV _ _ 860 910 1,040 1,050 1,100 1,230** 42 x 96 SLRA42096PV _ _ 1,160 1,220 1,400 1,410 1,470 1,6502+ 42 x 120 SLRA42120PV _ _ 1,570 1,650 1,880 1,890 1,970 2,200

** 48 x 96 SLRA48096PV _ _ 1,180 1,240 1,420 1,470 1,530 1,7102+ 48 x 120 SLRA48120PV _ _ 1,570 1,650 1,880 1,930 2,010 2,2402+ 48 x 144 SLRA48144PV _ _ 1,660 1,750 2,030 2,090 2,180 2,4602+ 48 x 168 SLRA48168PV _ _ 2,340 2,460 2,820 2,840 2,960 3,3202+ 48 x 192 SLRA48192PV _ _ 2,410 2,540 2,910 2,990 3,120 3,490

** 60 x 96 SLRA60096PV _ _ 1,440 1,520 1,740 1,800 1,880 2,1002+ 60 x 120 SLRA60120PV _ _ 1,880 1,980 2,270 2,330 2,430 2,7202+ 60 x 144 SLRA60144PV _ _ 2,030 2,140 2,490 2,570 2,680 3,0302+ 60 x 168 SLRA60168PV _ _ 2,810 2,960 3,420 3,440 3,590 4,0502+ 60 x 192 SLRA60192PV _ _ 2,890 3,040 3,500 3,610 3,760 4,220



For complete model number insert 2 character edge code: (PVEAfor eased or PVKN for knife edge)


*1 support bar included ** 2 support bars included 2+ 2 piece top with bars + table lock set included


oval ** 36 x 72 SLOV36072PV _ _ 660 690 780 820 850 940** 36 x 84 SLOV36084PV _ _ 860 910 1,040 1,050 1,100 1,230** 36 x 96 SLOV36096PV _ _ 890 940 1,080 1,110 1,160 1,3002+ 36 x 120 SLOV36120PV _ _ 1,330 1,400 1,570 1,600 1,670 1,840

** 42 x 72 SLOV42072PV _ _ 860 910 1,040 1,050 1,100 1,230** 42 x 96 SLOV42096PV _ _ 1,160 1,220 1,400 1,410 1,470 1,650

** 48 x 96 SLOV48096PV _ _ 1,180 1,240 1,420 1,470 1,530 1,7102+ 48 x 120 SLOV48120PV _ _ 1,600 1,680 1,910 1,960 2,040 2,2702+ 48 x 144 SLOV48144PV _ _ 1,650 1,740 2,010 2,080 2,170 2,4402+ 48 x 168 SLOV48168PV _ _ 1,910 2,010 2,330 2,410 2,510 2,830

** 60 x 96 SLOV60096PV _ _ 1,520 1,600 1,820 1,880 1,960 2,1802+ 60 x 120 SLOV60120PV _ _ 1,940 2,040 2,320 2,390 2,490 2,7702+ 60 x 144 SLOV60144PV _ _ 2,040 2,150 2,500 2,580 2,690 3,0402+ 60 x 168 SLOV60168PV _ _ 2,630 2,770 3,230 3,260 3,400 3,8602+ 60 x 192 SLOV60192PV _ _ 2,680 2,820 3,280 3,400 3,540 4,000

arc trapezoid ** 60 x 96 SLAT60096PV _ _ 1,510 1,740 1,990 1,870 2,100 2,3502+ 60 x 120 SLAT60120PV _ _ 1,980 2,260 2,580 2,430 2,710 3,0302+ 60 x 144 SLAT60144PV _ _ 2,180 2,290 2,670 2,720 2,830 3,2102+ 60 x 168 SLAT60168PV _ _ 3,010 3,170 3,670 3,640 3,800 4,3002+ 60 x 192 SLAT60192PV _ _ 3,090 3,250 3,760 3,810 3,970 4,480

arc rectangle ** 48 x 72 SLAR48072PV _ _ 880 940 1,080 1,100 1,160 1,300** 48 x 96 SLAR48096PV _ _ 1,250 1,350 1,530 1,540 1,640 1,8202+ 48 x 120 SLAR48120PV _ _ 1,570 1,650 1,880 1,930 2,010 2,2402+ 48 x 144 SLAR48144PV _ _ 1,640 1,730 2,000 2,070 2,160 2,4302+ 48 x 168 SLAR48168PV _ _ 2,090 2,200 2,520 2,590 2,700 3,0202+ 48 x 192 SLAR48192PV _ _ 2,390 2,520 2,880 2,970 3,100 3,460

** 60 x 96 SLAR60096PV _ _ 1,520 1,630 1,850 1,880 1,990 2,2102+ 60 x 120 SLAR60120PV _ _ 1,860 1,960 2,250 2,310 2,410 2,7002+ 60 x 144 SLAR60144PV _ _ 2,030 2,140 2,490 2,570 2,680 3,0302+ 60 x 168 SLAR60168PV _ _ 2,810 2,960 3,420 3,440 3,590 4,0502+ 60 x 192 SLAR60192PV _ _ 2,920 3,070 3,530 3,640 3,790 4,250


For complete model number insert 2 character edge code: (PVEAfor eased or PVKN for knife edge)


* 1 support bar included ** 2 support bars included. 2+ 2 piece top with bars + table lock set included

surfacesPVEA 3mm eased edge and PVKN knife edge conference: boat, racetrack

surfacesPVEA 3mm eased edge and PVKN knife edge conference: oval, arc trapezoid, arc rectangle


dimensions model no. A B C A B C** 36 x 72 SL_ _36072PV _ _ 710 750 850 870 910 1,010** 42 x 60 SL_ _42060PV _ _ 790 830 950 950 990 1,110** 42 x 72 SL_ _42072PV _ _ 940 990 1,140 1,130 1,180 1,330** 42 x 84 SL_ _42084PV _ _ 1,290 1,360 1,570 1,510 1,580 1,790** 42 x 96 SL_ _42096PV _ _ 1,350 1,420 1,620 1,600 1,670 1,870

48 x 48 SL_ _48048PV _ _ 590 620 720 730 760 860** 48 x 54 SL_ _48054PV _ _ 790 830 950 950 990 1,110** 48 x 60 SL_ _48060PV _ _ 810 850 980 990 1,030 1,160** 48 x 72 SL_ _48072PV _ _ 960 1,010 1,160 1,180 1,230 1,380** 48 x 84 SL_ _48084PV _ _ 1,320 1,390 1,590 1,570 1,640 1,840** 48 x 96 SL_ _48096PV _ _ 1,370 1,440 1,640 1,660 1,730 1,9302+ 48 x 120 SL_ _48120PV _ _ 1,670 1,760 2,020 2,030 2,120 2,3802+ 48 x 144 SL_ _48144PV _ _ 1,800 1,890 2,190 2,230 2,320 2,6202+ 48 x 168 SL_ _48168PV _ _ 2,490 2,620 3,020 2,990 3,120 3,5202+ 48 x 192 SL_ _48192PV _ _ 2,570 2,700 3,100 3,150 3,280 3,680** 54 x 54 SL_ _54054PV _ _ 960 1,010 1,170 1,140 1,190 1,350** 54 x 60 SL_ _54060PV _ _ 980 1,030 1,190 1,180 1,230 1,390** 54 x 72 SL_ _54072PV _ _ 1,170 1,230 1,420 1,410 1,470 1,660** 54 x 84 SL_ _54084PV _ _ 1,550 1,630 1,870 1,830 1,910 2,150** 54 x 96 SL_ _54096PV _ _ 1,630 1,720 1,970 1,950 2,040 2,2902+ 54 x 120 SL_ _54120PV _ _ 2,000 2,100 2,420 2,410 2,510 2,8302+ 54 x 144 SL_ _54144PV _ _ 2,180 2,290 2,670 2,670 2,780 3,1602+ 54 x 168 SL_ _54168PV _ _ 2,980 3,140 3,650 3,550 3,710 4,2202+ 54 x 192 SL_ _54192PV _ _ 3,070 3,230 3,730 3,720 3,880 4,380** 60 x 60 SL_ _60060PV _ _ 1,010 1,060 1,220 1,240 1,290 1,450** 60 x 66 SL_ _60066PV _ _ 1,160 1,220 1,410 1,410 1,470 1,660** 60 x 72 SL_ _60072PV _ _ 1,190 1,250 1,440 1,460 1,520 1,710** 60 x 84 SL_ _60084PV _ _ 1,570 1,650 1,900 1,890 1,970 2,220** 60 x 96 SL_ _60096PV _ _ 1,650 1,740 1,990 2,010 2,100 2,3502+ 60 x 120 SL_ _60120PV _ _ 2,010 2,120 2,440 2,460 2,570 2,8902+ 60 x 144 SL_ _60144PV _ _ 2,190 2,310 2,690 2,730 2,850 3,2302+ 60 x 168 SL_ _60168PV _ _ 3,010 3,170 3,670 3,640 3,800 4,3002+ 60 x 192 SL_ _60192PV _ _ 3,090 3,250 3,750 3,810 3,970 4,470

Pic ** 48 x 72 SLPI48072PV _ _ 950 1,000 1,150 1,170 1,220 1,370** 48 x 96 SLPI48096PV _ _ 1,340 1,410 1,600 1,630 1,700 1,890** 60 x 156 SLPI60156PV _ _ 2,750 2,890 3,340 3,340 3,480 3,930

For complete model number:1. insert 2 character top shape code (half arced rectangle HR , half boat HB, trapezoid media TM, or bullet media BM)2. insert 2 character edge shape code (PVEA eased or PVKN knife)For example 48" x 72" trapezoid media top #SLTM48072PVEA

half arced rectangle (HR) bullet media (BM)trapezoid media (TM)half boat (HB)


Formica + Wilsonart HPL laminate finish grades listed on pages 18-25. For additional laminate grades, contact


dimensions model no. A B Cquarter round 18 x 18 SLQR18018PVEA 100 110 130

24 x 24 SLQR24024PVEA 150 160 19030 x 30 SLQR30030PVEA 230 240 280

half round 18 x 36 SLHA18036PVEA 200 210 24024 x 48 SLHA24048PVEA 320 340 40030 x 60 SLHA30060PVEA 500 530 610

crescent 18 x 36 SLCR18036PVEA 240 250 28024 x 48 SLCR24048PVEA 400 420 48024 x 60 SLCR24060PVEA 610 640 71030 x 60 SLCR30060PVEA 690 730 820

trapezoid 24 x 48 SLTR24048PVEA 320 340 40030 x 60 SLTR30060PVEA 500 530 61030 x 72 SLTR30072PVEA 700 740 840

corner - angled front 24 x 36 SLCA24036PVEA 330 370 43024 x 42 SLCA24042PVEA 500 540 63024 x 48 SLCA24048PVEA 530 560 650

corner - curved front 24 x 36 SLCC24036PVEA 330 370 43024 x 42 SLCC24042PVEA 500 540 63024 x 48 SLCC24048PVEA 530 560 650

corner - extended curved front 24 x 36 x 60 SLCE243660PVEA 700 740 84024 x 36 x 72 SLCE243672PVEA 800 840 97024 x 48 x 60 SLCE244860PVEA 890 940 1,08024 x 48 x 72 SLCE244872PVEA 1,050 1,100 1,270

24 x 60 x 36*** SLCE246036PVEA 700 740 84024 x 72 x 36*** SLCE247236PVEA 800 840 97024 x 60 x 48*** SLCE246048PVEA 890 940 1,08024 x 72 x 48*** SLCE247248PVEA 1,050 1,100 1,270

corner - 120 degree 24 x 36 SL1224036PVEA 940 990 1,16024 x 42 SL1224042PVEA 1,230 1,290 1,52024 x 48 SL1224048PVEA 1,270 1,340 1,570

wedge 24 x 30 x 36 SLWE243036PVEA 290 320 38024 x 30 x 42 SLWE243042PVEA 380 420 49024 x 30 x 48 SLWE243048PVEA 390 430 500

24 x 30 x 60*** SLWE243060PVEA 540 620 70030 x 24 x 36 SLWE302436PVEA 290 320 38030 x 24 x 42 SLWE302442PVEA 380 420 49030 x 24 x 48 SLWE302448PVEA 390 430 500

30 x 24 x 60*** SLWE302460PVEA 540 620 700

*** top stiffeners may be required on corner - extended curved front or wedge tops over 48" longemail [email protected] to confirm if you will need top stiffener(s), it will depend on the bases being used with the top

PVEA eased



surfacesPVEA 3mm eased edge

additional shapes

surfacesPVEA 3mm eased edge and PVKN knife edge media: half arced rectangle, half boat, trapezoid media, bullet media, pic


shape dimension model no. A B C

round 18 SLRD18000VNEA 180 190 22024 SLRD24000VNEA 200 210 24030 SLRD30000VNEA 260 270 32036 SLRD36000VNEA 340 360 42042 SLRD42000VNEA 550 580 68048 SLRD48000VNEA 580 610 70054 SLRD54000VNEA 860 910 1,06060 SLRD60000VNEA 910 960 1,110

square 18 x 18 SLSQ18018VNEA 180 190 22024 x 24 SLSQ24024VNEA 200 210 24030 x 30 SLSQ30030VNEA 260 270 32036 x 36 SLSQ36036VNEA 340 360 42042 x 42 SLSQ42042VNEA 550 580 68048 x 48 SLSQ48048VNEA 580 610 70054 x 54 SLSQ54054VNEA 860 910 1,06060 x 60 SLSQ60060VNEA 910 960 1,110

sqircle 30 x 30 SLSC30030VNEA 260 270 32036 x 36 SLSC36036VNEA 350 370 43042 x 42 SLSC42042VNEA 550 580 68048 x 48 SLSC48048VNEA 580 610 70054 x 54 SLSC54054VNEA 860 910 1,06060 x 60 SLSC60060VNEA 910 960 1,110

rectangle 18 x 36 SLRE18036VNEA 250 260 31018 x 42 SLRE18042VNEA 290 300 35018 x 48 SLRE18048VNEA 290 300 350

* 18 x 54 SLRE18054VNEA 410 430 490* 18 x 60 SLRE18060VNEA 390 410 470* 18 x 66 SLRE18066VNEA 430 450 520* 18 x 72 SLRE18072VNEA 440 460 530* 18 x 84 SLRE18084VNEA 590 620 710* 18 x 90 SLRE18090VNEA 620 650 750* 18 x 96 SLRE18096VNEA 640 670 770

24 x 30 SLRE24030VNEA 230 240 28024 x 36 SLRE24036VNEA 260 270 31024 x 42 SLRE24042VNEA 280 290 34024 x 48 SLRE24048VNEA 290 310 370

* 24 x 54 SLRE24054VNEA 420 440 510* 24 x 60 SLRE24060VNEA 420 440 500* 24 x 66 SLRE24066VNEA 440 460 530* 24 x 72 SLRE24072VNEA 460 480 550* 24 x 84 SLRE24084VNEA 630 650 740* 24 x 90 SLRE24090VNEA 650 680 770* 24 x 96 SLRE24096VNEA 660 690 790

VNEA eased(1.5" radius corners)




rectangle 30 x 36 SLRE30036VNEA 320 340 39030 x 42 SLRE30042VNEA 340 360 42030 x 48 SLRE30048VNEA 360 380 450

** 30 x 54 SLRE30054VNEA 500 530 610** 30 x 60 SLRE30060VNEA 520 550 620** 30 x 66 SLRE30066VNEA 570 600 680** 30 x 72 SLRE30072VNEA 590 620 710** 30 x 84 SLRE30084VNEA 860 910 1,040** 30 x 90 SLRE30090VNEA 890 940 1,070** 30 x 96 SLRE30096VNEA 900 950 1,080

36 x 42 SLRE36042VNEA 400 420 49036 x 48 SLRE36048VNEA 450 470 540

** 36 x 54 SLRE36054VNEA 620 650 740** 36 x 60 SLRE36060VNEA 630 660 750** 36 x 66 SLRE36066VNEA 680 720 830** 36 x 72 SLRE36072VNEA 690 730 840** 36 x 84 SLRE36084VNEA 1,000 1,050 1,190** 36 x 90 SLRE36090VNEA 1,040 1,090 1,240** 36 x 96 SLRE36096VNEA 1,050 1,100 1,2502+ 36 x 120 SLRE36120VNEA 1,290 1,360 1,540

42 x 48 SLRE42048VNEA 560 590 690** 42 x 54 SLRE42054VNEA 660 690 780** 42 x 60 SLRE42060VNEA 790 830 960** 42 x 66 SLRE42066VNEA 910 960 1,100** 42 x 72 SLRE42072VNEA 940 990 1,140** 42 x 84 SLRE42084VNEA 1,270 1,340 1,530** 42 x 90 SLRE42090VNEA 1,310 1,380 1,580** 42 x 96 SLRE42096VNEA 1,320 1,390 1,5902+ 42 x 120 SLRE42120VNEA 1,600 1,680 1,9202+ 42 x 144 SLRE42144VNEA 1,730 1,820 2,110

** 48 x 54 SLRE48054VNEA 790 830 960** 48 x 60 SLRE48060VNEA 800 830 960** 48 x 66 SLRE48066VNEA 940 990 1,140** 48 x 72 SLRE48072VNEA 940 990 1,140** 48 x 84 SLRE48084VNEA 1,270 1,340 1,530** 48 x 90 SLRE48090VNEA 1,310 1,380 1,580** 48 x 96 SLRE48096VNEA 1,320 1,390 1,5902+ 48 x 120 SLRE48120VNEA 1,640 1,730 1,9702+ 48 x 144 SLRE48144VNEA 1,760 1,850 2,140

** 60 x 66 SLRE60090VNEA 1,140 1,200 1,380** 60 x 72 SLRE60090VNEA 1,160 1,220 1,410** 60 x 84 SLRE60084VNEA 1,540 1,620 1,860** 60 x 90 SLRE60090VNEA 1,620 1,700 1,940** 60 x 96 SLRE60096VNEA 1,620 1,710 1,9502+ 60 x 120 SLRE60120VNEA 1,980 2,080 2,3902+ 60 x 144 SLRE60144VNEA 2,150 2,260 2,630




surfacesVNEA vinyl eased edgeround, square, squircle, rectangle

surfacesVNEA vinyl eased edge

rectangle (con’t)



boat ** 36 x 72 SLBO36072VNEA 690 730 840** 36 x 84 SLBO36084VNEA 1,000 1,050 1,190** 36 x 96 SLBO36096VNEA 1,050 1,100 1,2502+ 36 x 120 SLBO36120VNEA 1,360 1,430 1,610

** 42 x 96 SLBO42096VNEA 1,330 1,390 1,590

** 48 x 96 SLBO48096VNEA 1,340 1,410 1,6102+ 48 x 120 SLBO48120VNEA 1,760 1,850 2,090

** 60 x 96 SLBO60096VNEA 1,620 1,710 1,9502+ 60 x 120 SLBO60120VNEA 2,110 2,220 2,5302+ 60 x 144 SLBO60144VNEA 2,150 2,260 2,630

racetrack ** 36 x 72 SLRA36072VNEA 680 720 830** 36 x 84 SLRA36084VNEA 990 1,040 1,180** 36 x 96 SLRA36096VNEA 940 990 1,1402+ 36 x 120 SLRA36120VNEA 1,290 1,360 1,540

** 42 x 72 SLRA42072VNEA 910 960 1,100** 42 x 96 SLRA42096VNEA 1,220 1,280 1,4802+ 42 x 120 SLRA42120VNEA 1,670 1,730 1,970

** 48 x 96 SLRA48096VNEA 1,240 1,300 1,5002+ 48 x 120 SLRA48120VNEA 1,640 1,730 1,9702+ 48 x 144 SLRA48144VNEA 1,760 1,850 2,140

** 60 x 96 SLRA60096VNEA 1,520 1,600 1,8402+ 60 x 120 SLRA60120VNEA 1,980 2,080 2,3902+ 60 x 144 SLRA60144VNEA 2,150 2,260 2,630

oval ** 36 x 72 SLOV36072VNEA 680 720 830** 36 x 84 SLOV36084VNEA 910 960 1,100** 36 x 96 SLOV36096VNEA 940 990 1,1402+ 36 x 120 SLOV36120VNEA 1,390 1,460 1,640

** 42 x 72 SLOV42072VNEA 910 960 1,100** 42 x 96 SLOV42096VNEA 1,220 1,280 1,480

** 48 x 96 SLOV48096VNEA 1,240 1,300 1,5002+ 48 x 120 SLOV48120VNEA 1,670 1,760 2,0002+ 48 x 144 SLOV48144VNEA 1,740 1,830 2,130

** 60 x 96 SLOV60096VNEA 1,600 1,680 1,9202+ 60 x 120 SLOV60120VNEA 2,030 2,140 2,4402+ 60 x 144 SLOV60144VNEA 2,160 2,270 2,640




dimensions model no. A B C** 36 x 72 SL_ _36072VNEA 740 780 900

** 42 x 60 SL_ _42060VNEA 830 870 1010** 42 x 72 SL_ _42072VNEA 990 1,040 1,200** 42 x 84 SL_ _42084VNEA 1,370 1,440 1,650** 42 x 96 SL_ _42096VNEA 1,420 1,490 1,700

48 x 48 SL_ _48048VNEA 630 660 760** 48 x 54 SL_ _48054VNEA 830 870 1,010** 48 x 60 SL_ _48060VNEA 850 890 1,030** 48 x 72 SL_ _48072VNEA 1,010 1,060 1,220** 48 x 84 SL_ _48084VNEA 1,390 1,460 1,670** 48 x 96 SL_ _48096VNEA 1,430 1,510 1,7302+ 48 x 120 SL_ _48120VNEA 1,760 1,850 2,1202+ 48 x 144 SL_ _48144VNEA 1,890 1,990 2,320

** 54 x 54 SL_ _54054VNEA 1,020 1,070 1,240** 54 x 60 SL_ _54060VNEA 1,040 1,090 1,260** 54 x 72 SL_ _54072VNEA 1,230 1,290 1,490** 54 x 84 SL_ _54084VNEA 1,620 1,710 1,980** 54 x 96 SL_ _54096VNEA 1,710 1,800 2,0702+ 54 x 120 SL_ _54120VNEA 2,100 2,210 2,5502+ 54 x 144 SL_ _54144VNEA 2,300 2,420 2,830

** 60 x 60 SL_ _60060VNEA 1,050 1,110 1,280** 60 x 66 SL_ _60066VNEA 1,220 1,280 1,480** 60 x 72 SL_ _60072VNEA 1,240 1,310 1,520** 60 x 84 SL_ _60084VNEA 1,650 1,740 2,000** 60 x 96 SL_ _60096VNEA 1,740 1,830 2,1002+ 60 x 120 SL_ _60120VNEA 2,130 2,240 2,5702+ 60 x 144 SL_ _60144VNEA 2,330 2,450 2,850


For complete model number 1. insert 2 character top shape code (half arced rectangle HR, half boat HB, trapezoid media TM, bullet media - BM)For example 48" x 72" trapezoid media top with vinyl edge #SLTM48072VNEA

half arced rectangle (HR) trapezoid media (TM)half boat (HB) bullet media (BM)




surfacesVNEA vinyl eased edgeconference: boat, racetrack, oval

surfacesVNEA vinyl eased edge

media: half arced rectangle, half boat, trapezoid media, bullet media


shape dimension model no. A B C A B Cround

24 SLRD24000_ _ _ _ 650 720 78030 SLRD30000_ _ _ _ 790 870 95036 SLRD36000_ _ _ _ 930 1,020 1,12042 SLRD42000_ _ _ _ 1,030 1,130 1,24048 SLRD48000_ _ _ _ 1,120 1,230 1,34054 SLRD54000_ _ _ _ 1,180 1,300 1,42060 SLRD60000_ _ _ _ 1,300 1,430 1,560

square24 x 24 SLSQ24024_ _ _ _ 590 650 71030 x 30 SLSQ30030_ _ _ _ 720 790 86036 x 36 SLSQ36036_ _ _ _ 850 940 1,02042 x 42 SLSQ42042_ _ _ _ 950 1,050 1,14048 x 48 SLSQ48048_ _ _ _ 1,060 1,170 1,27054 x 54 SLSQ60060_ _ _ _ 1,150 1,270 1,38060 x 60 SLSQ54054_ _ _ _ 1,280 1,410 1,540

rectangle18 x 48 SLRE18048_ _ _ _ 570 630 680

* 18 x 60 SLRE18060_ _ _ _ 700 770 840* 18 x 72 SLRE18072_ _ _ _ 850 940 1,020

24 x 30 SLRE24030_ _ _ _ 500 550 600 600 660 72024 x 36 SLRE24036_ _ _ _ 540 590 650 650 720 78024 x 42 SLRE24042_ _ _ _ 580 640 700 770 850 92024 x 48 SLRE24048_ _ _ _ 630 690 760 830 910 1,000

* 24 x 60 SLRE24060_ _ _ _ 800 880 960 1,020 1,120 1,220* 24 x 72 SLRE24072_ _ _ _ 980 1,080 1,180 1,090 1,200 1,310

30 x 36 SLRE30036_ _ _ _ 600 660 720 780 860 94030 x 42 SLRE30042_ _ _ _ 670 740 800 850 940 1,02030 x 48 SLRE30048_ _ _ _ 730 800 880 930 1,020 1,120

** 30 x 60 SLRE30060_ _ _ _ 950 1,050 1,140 1,140 1,250 1,370** 30 x 66 SLRE30066_ _ _ _ 1,040 1,140 1,250** 30 x 72 SLRE30072_ _ _ _ 1,120 1,230 1,340 1,240 1,360 1,490** 30 x 96 SLRE30096_ _ _ _ 1,620 1,780 1,940

36 x 42 SLRE36042_ _ _ _ 800 880 960 910 1,000 1,09036 x 48 SLRE36048_ _ _ _ 850 940 1,020 980 1,080 1,180

** 36 x 60 SLRE36060_ _ _ _ 1,180 1,300 1,420 1,220 1,340 1,460** 36 x 72 SLRE36072_ _ _ _ 1,330 1,460 1,600 1,370 1,510 1,640

UREA, URER, URBN, URND

(.75 degree corners)UPER

(90 degree corners)

For complete model number insert 4 character edge code: urethane ergo/PVC eased combination (user side urethane, other sides PVEA) UPER, urethane eased UREA, urethane ergo URER, urethane bullnose URBN, urethane no drip URNDFor example 24" x 60 rectangle top with UPER ergo edge #SLRE24060UPER

Please email [email protected] if you do not see the desired top size/shape. Urethane tops are only available in certain sizes and shapes.


UREA, URER, URBN, URND

(.75 degree corners)

UPER (90 degree corners)


shape dimension model no. A B CPic ** 48 x 72 SLPI48072URER 2,760 2,910 3,490

** 48 x 96 SLPI48096URER 3,600 3,790 4,550** 60 x 156 SLPI60156URER 6,900 7,260 8,710

Pic is only available wth URER edge

URER

Please email [email protected] if you do not see the desired top size/shape. Urethane tops are only available in certain sizes and shapes.



surfacesurethane UPER, UREA, URER, URBN, URNDround, square, rectangle

surfacesurethane URER

pic


bases


basebase dim.

max top support list

glide/caster option(s) finish option(s)

Zoey 15 20 x 96 BTZOE20096SD _ ME 48021 24 x 96 BTZOE24096SD _ ME 50027 36 x 96 BTZOE36096SD _ ME 54033 42 x 96 BTZOE42096SD _ ME 580

Capri 16 20 x 96 BTCAP20096SD _ ME 38022 30 x 96 BTCAP30096SD _ ME 40026 36 x 96 BTCAP36096SD _ ME 410

Keller 15 20 x 96 BTKEL20096SD _ __ 63020 24 x 96 BTKEL24096SD _ __ 65026 36 x 96 BTKEL36096SD _ __ 71033 42 x 96 BTKEL42096SD _ __ 82038 48 x 96 BTKEL48096SD _ __ 950

Ria 15 20 x 96 BTRIA20096SD _ __ 54020 24 x 96 BTRIA24096SD _ __ 56026 36 x 96 BTRIA36096SD _ __ 58033 42 x 96 BTRIA42096SD _ __ 70038 48 x 96 BTRIA48096SD _ __ 860

Rosanno 16 20 x 96 BTROS20096SD _ ME 54022 30 x 96 BTROS30096SD _ ME 56026 36 x 96 BTROS36096SD _ ME 580

Moto 18 24 x 96 BTMOT24096SD _ ME 66022 30 x 96 BTMOT30096SD _ ME 70026 36 x 96 BTMOT36096SD _ ME 750

Moto 2 18 24 x 96 BTMO224096SD _ ME 52022 30 x 96 BTMO230096SD _ ME 54026 36 x 96 BTMO236096SD _ ME 580

Novi 18 20 x 96 BTNOV20096SD _ __ 52022 30 x 96 BTNOV30096SD _ __ 54026 36 x 96 BTNOV36096SD _ __ 560

32* 42 x 96 BTNOV42096SD _ __ 700PC finish not available for the 32" Novi T base

base set model no.

Standard metal powder coat finishes (ME):Black Wrinkle, Chateau Brown Wrinkle, Flat Black, Furniture White, Inner Tone, Light Tone, Medium Tone, and Metallic Silver (PO) Polished aluminum / chrome finish (Keller / Ria)(PC) Polished chrome finish (Rosanno / Novi)

G $0 glidesC + $80 castersH + $100 hidden casters**

For complete model number:1. Insert glide/caster selection : G glides - prices listedC casters, + $80 list P premium casters, + $120 list (Zoey / Moto)H hidden/concealed casters, + $100 list (Novi)

2. Insert finish selection: ME standard metal, pricing listedPO Polished Aluminum/Chrome - Keller & Ria add $120 listPC Polished Chrome - Novi + $220 list / Rosanno + $320 list

G $0 glidesC + $80 castersP + $120 premium casters

G $0 glidesC + $80 castersP + $120premium casters

ME $0 metal

PC + $220polished

ME $0standard metal

PO + $120polished

ME $0standard metal

G $0 glides

C + $80 casters

ME $0standard metal

ME $0std metalPC + $320polished

C casters + $80 2" black dual wheel locking (all bases except Zoey)3" black dual wheel locking (Zoey)

P premium casters + $120 3" white dual wheel locking (Zoey)2" silver/black dual wheel locking - (Moto, Moto 2)

H Novi hidden/concealed casters + $100one T base per set has glides, the other base has hidden/concealed casters** Novi hidden/conceled caster option is not available with the PC polished chrome option

Custom height bases for Keller, Ria, Moto, and Novi only - + $140 list Custom lower and taller fixed height options are available for single column tables with a top size up to 36 x 72. For a custom lower height, replace the "SD" in the model number for "SL"For a custom taller fixed height, replace the "SD" in the model number for "SH"

baseqty + dim.

max top support list glide finish option(s)

Zoey (2) 38 48 x 96 BTZOE480962D G ME 1,100(3) 38 48 x 144 BTZOE481442D G ME 1,650(4) 38 48 x 192 BTZOE481922D G ME 2,200(2) 47 60 x 96 BTZOE600962D G ME 1,200(3) 47 60 x 144 BTZOE601442D G ME 1,800(4) 47 60 x 192 BTZOE601922D G ME 2,400

Keller (2) 34 48 x 96 BTKEL480962D G _ 1,100(3) 34 48 x 144 BTKEL481442D G _ 1,660(4) 34 48 x 192 BTKEL481922D G _ 2,210(2) 40 60 x 96 BTKEL600962D G _ 1,200(3) 40 60 x 144 BTKEL601442D G _ 1,800(4) 40 60 x 192 BTKEL601922D G _ 2,400

Ria (2) 34 48 x 96 BTRIA480962D G _ 920(3) 34 48 x 144 BTRIA481442D G _ 1,380(4) 34 48 x 192 BTRIA481922D G _ 1,980(2) 40 60 x 96 BTRIA600962D G _ 1,000(3) 40 60 x 144 BTRIA601442D G _ 1,490(4) 40 60 x 192 BTRIA601922D G _ 2,120

Rosanno(2) 36 48 x 96 BTROS480962D G ME 1,060(3) 36 48 x 144 BTROS481442D G ME 1,580

Novi (2) 36 48 x 96 BTNOV480962D G ME 860(3) 36 48 x 144 BTNOV481442D G ME 1,290(2) 42 60 x 96 BTNOV600962D G ME 930(3) 42 60 x 144 BTNOV601442D G ME 1,400

Moto (2) 26 36 x 96 BTMOT360962D G ME 1,060(3) 26 36 x 144 BTMOT361442D G ME 1,590(2) 32 42 x 96 BTMOT420962D G ME 1,120(3) 32 42 x 144 BTMOT421442D G ME 1,680(4) 32 42 x 192 BTMOT421922D G ME 2,240(2) 36 48 x 96 BTMOT480962D G ME 1,200(3) 36 48 x 144 BTMOT481442D G ME 1,800(4) 36 48 x 192 BTMOT481922D G ME 2,400

base set model no.

ME standard metal $0

PO polished(2) $260(3) $390(4) $520


For complete model number:1. Insert finish selection :

ME standard metal, pricing listedPO Polished Aluminum/Chrome - Keller & Ria

add $130 list per base 2 bases - add $260, 3 bases - add $390, 4 bases - add $520

G $0 glides


Standard metal powder coat finishes (ME):Black Wrinkle, Chateau Brown Wrinkle, Flat Black, Furniture White, Inner Tone, Light Tone, Medium Tone, and Metallic Silver

(PO) Polished aluminum / chrome finish (Keller / Ria)

(PC) Polished chrome finish (Rosanno / Novi)

Note that the fixed T and double column T bases cannot be spread more than 50" apart at center.

Custom height bases for Keller, Ria, Moto, and Novi only - + $280 list - for base sets with 2 bases onlyCustom lower and taller fixed height options are available for double column tables with a top size up to 48 x 72. For a custom lower height, replace the "2D" in the model number for "2L"For a custom taller fixed height, replace the "2D" in the model number for "2H"

basesT fixed single column sets

basesT fixed double column sets


basebase dim.



Capri with beam 16 20 x 60 BTCAP20060NB C ME 1,06016 20 x 72 BTCAP20072NB C ME 1,08022 24 x 60 BTCAP24060NB C ME 1,08022 24 x 72 BTCAP24072NB C ME 1,10026 30 x 60 BTCAP30060NB C ME 1,09026 30 x 72 BTCAP30072NB C ME 1,110

without beam 16 20 x 72 BTCAP20072NE C ME 84022 24 x 72 BTCAP24072NE C ME 86026 30 x 72 BTCAP30072NE C ME 870

Zoey with beam 15 20 x 60 BTZOE20060NB _ ME 1,05021 24 x 60 BTZOE24060NB _ ME 1,07027 30 x 60 BTZOE30060NB _ ME 1,09033 36 x 60 BTZOE36060NB _ ME 1,13015 20 x 72 BTZOE20072NB _ ME 1,08021 24 x 72 BTZOE24072NB _ ME 1,10027 30 x 72 BTZOE30072NB _ ME 1,12033 36 x 72 BTZOE36072NB _ ME 1,170

without beam 15 20 x 72 BTZOE20072NE _ ME 95021 24 x 60 BTZOE24072NE _ ME 98027 30 x 72 BTZOE30072NE _ ME 1,030

Moto 2 (2" column)with beam 18 24 x 60 BTMO224060NB _ ME 1,160

22 30 x 60 BTMO230060NB _ ME 1,17026 36 x 60 BTMO236060NB _ ME 1,22018 24 x 72 BTMO224072NB _ ME 1,19022 30 x 72 BTMO230072NB _ ME 1,20026 36 x 72 BTMO236072NB _ ME 1,250

without beam 18 24 x 72 BTMO224072NE _ ME 1,02022 30 x 72 BTMO230072NE _ ME 1,040

base set model no.

ME $0standard metal

C $0 casters

G $0 glides

C $0 black casters

P $40 premium casters

For complete model number:1. Insert glide/caster selection :

G glides - prices listedC casters, see below P premium casters, see below

G $0 glides

C + $80 casters

P + $120 premium casters

Zoey, Capri and Moto flip nest bases with a beam do not require top stiffenersThe cost of the top stiffener is included in the standard Symphony top price.

Deduct the following from the list price shown for a top in the top section of the price list -$40 list for tops that are up to 24" deep (1 stiffener)-$80 list for tops that are up to 36" deep (2 stiffeners)

Note that the"NE" model numbers do not have a beam and therefore the bases cannot be spread more than 50" apart at center when using top stiffeners.

ZOEY, CAPRI AND MOTO FLIP MECH WITH BEAM IMAGE:

ADDITONAL FLIP NEST BEAM LENGTHS AVAILABLE FOR TOPS UP TO 96" LONG, EMAIL [email protected] FOR MORE INFORMATION.

ZOEY, CAPRI AND MOTO FLIP MECHWITHOUT BEAM IMAGE:

basebase dim.



Keller 15 20 x 72 BTKEL20072NE _ __ 1,05020 24 x 72 BTKEL24072NE _ __ 1,08026 36 x 72 BTKEL36072NE _ __ 1,130

Ria 15 20 x 72 BTRIA20072NE _ __ 98020 24 x 72 BTRIA24072NE _ __ 99026 36 x 72 BTRIA36072NE _ __ 1,030

Rosanno 18 20 x 72 BTROS20072NE _ ME 98022 30 x 72 BTROS30072NE _ ME 99026 36 x 72 BTROS36072NE _ ME 1,020

Novi 18 20 x 72 BTNOV20072NE _ __ 95022 30 x 72 BTNOV30072NE _ __ 96026 36 x 72 BTNOV36072NE _ __ 990

Novi Double Column 32 48 x 48, 60rd BTNOV480482N C ME 1,860with Nester Series beam

base set model no.

ME $0standard metal

PO + $120polished

ME $0 metal

ME $0 metal

G $0 glides

C + $80 casters

G $0 glidesC + $80 castersH + $100 hidden/ concealed

ME $0standard metalC + $0 casters

(ME) Standard metal powder coat finishes :Black Wrinkle (BW), Chateau Brown Wrinkle (CB), Flat Black (FB), Furniture White (FW), Inner Tone (IT), Light Tone (LT), Medium Tone (MT), Metallic Silver (MS).


G glides - prices listedC casters, see below P premium casters, see belowH hidden/concealed casters (Novi T), + $100 list

2. Insert finish type: ME standard metal - pricing listedPO premium Polished Aluminum/Chrome (Keller + Ria ), add $120 list

KELLER, RIA, ROSANNO AND NOVI SINGLE T FLIP MECH IMAGE:

Note that the Keller, Ria and Novi single column series bases do not have a beam and therefore the bases cannot be spread more than 50" apart at center.

C casters2" black dual wheel locking (Capri - $0 list, Moto 2, Keller, Ria, Rosanno, Novi +$80)3" black dual wheel locking (Zoey + $0)

P premium casters 2" silver/black dual wheel locking - (Moto 2+ $120)3" white dual wheel locking (Zoey + $40)

H Novi hidden/concealed casters + $100one T base per set has glides, the other base has hidden/concealed casters

basesT nesting setsCapri, Zoey, Moto 2

basesT nesting sets

Keller, Ria, Rosanno, Novi, Novi Double Column


basebase dim.


glide/caster option(s) finish

Keller spring clip 15 20 x 72 BTKEL20072NS _ ME 1,330

20 24 x 72 BTKEL24072NS _ ME 1,36026 36 x 72 BTKEL36072NS _ ME 1,420

Ria spring clip 15 20 x 72 BTRIA20072NS _ ME 1,250

20 24 x 72 BTRIA24072NS _ ME 1,27026 36 x 72 BTRIA36072NS _ ME 1,310

Rosanno spring clip 18 20 x 72 BTROS20072NS _ ME 1,280

22 30 x 72 BTROS30072NS _ ME 1,30026 36 x 72 BTROS36072NS _ ME 1,340

Novi spring clip 18 20 x 72 BTNOV20072NS _ ME 1,220

22 30 x 72 BTNOV30072NS _ ME 1,23026 36 x 72 BTNOV36072NS _ ME 1,260

base set model no.

ME $0standard metal


G glides - prices listedC casters, + $80 list H hidden/concealed casters (Novi), + $100 list

G $0 glides

C + $80 casters

G $0 glides

C + $80 casters

H + $100 hidden / concealed casters

S Spring clip height adjustment 24.75" - 33.75" (Keller, Ria, Novi and Rosanno) range in 1" increments

C casters + $80 2" black dual wheel locking

H (Novi) hidden/concealed casters + $100one T base per set has glides, the other base has hidden/concealed casters

Standard metal powder coat finishes (ME)Black Wrinkle, Chateau Brown Wrinkle, Flat Black, Furniture White, Inner Tone, Light Tone, Medium Tone, and Metallic Silver

Note that the bases cannot be spread more than 50" apart at center.

basesT nesting adjustable height setsKeller, Ria, Rosanno, Novi


basebase dim.



Zoey Moto (3" column) crankspring clip 15 20 x 72 BTZOE20072SP _ ME 900

21 24 x 72 BTZOE24072SP _ ME 92027 36 x 72 BTZOE36072SP _ ME 97033 42 x 72 BTZOE42072SP _ ME 1,000

Moto (3" column)ratchet 18 24 x 72 BTMOT24072SR _ ME 980

22 30 x 72 BTMOT30072SR _ ME 1,00026 36 x 72 BTMOT36072SR _ ME 1,040

Keller spring clip 15 20 x 72 BTKEL20072SS _ ME 910

20 24 x 72 BTKEL24072SS _ ME 93026 36 x 72 BTKEL36072SS _ ME 99033 42 x 72 BTKEL42072SS _ ME 1,100

Riaspring clip 15 20 x 72 BTRIA20072SS _ ME 830

20 24 x 72 BTRIA24072SS _ ME 84026 36 x 72 BTRIA36072SS _ ME 90033 42 x 72 BTRIA42072SS _ ME 1,020

Rosannospring clip 16 20 x 72 BTROS20072SS _ ME 820

22 30 x 72 BTROS30072SS _ ME 83026 36 x 72 BTROS36072SS _ ME 980

Novispring clip 18 20 x 72 BTNOV20072SS _ ME 810

22 30 x 72 BTNOV30072SS _ ME 83026 36 x 72 BTNOV36072SS _ ME 85032 42 x 72 BTNOV42072SS _ ME 1,010

ratchet 18 24 x 72 BTNOV24072SR _ ME 1,25022 30 x 72 BTNOV30072SR _ ME 1,27026 36 x 72 BTNOV36072SR _ ME 1,290

base set model no.

Standard metal powder coat finishes (ME)Black Wrinkle, Chateau Brown Wrinkle, Flat Black, Furniture White, Inner Tone, Light Tone, Medium Tone, and Metallic Silver

G $0 glides

C + $80 casters

For complete model number:insert glide/caster selection :G glides - prices listedC casters, add $80 listP premium casters, add $120 list (Zoey / Moto)H hidden/concealed casters, add $100 list (only available with Novi spring clip)

S Spring clip height adjustment 25.75" - 30.75" (Zoey)24.75" - 33.75" (Keller, Ria, Novi and Rosanno) range in 1" incrementsavailable for T base tables up to 42" deep

R Ratchet height adjustment (Novi )can be combined with flip top and casters27.75" - 39.75" height range easy adjustment: set foot on base and lift surfaceto lower, lift to hightest level for release down to lowest position

G $0 glidesC + $80 castersH + $100 concealed casters

G $0 glides

C + $80 casters


R Ratchet height adjustment (Moto)base height range with glides 26" - 35.5" (9.45" range)base height range with casters 28" - 37.5"13 positions in 0.78 inch incrementsChange positions by manually lifting the table topResets to lowest position when lifted to upper stop

C casters + $80 2" black dual wheel locking (all bases except Zoey)3" black dual wheel locking (Zoey)

P premium casters + $120 3" white dual wheel locking (Zoey)2" silver/black dual wheel locking - (Moto)


ME $0standard metal

G $0 glides

C + $80 casters

basebase dim.



Moto (3" column) crank 18 24 x 72 BTMOT24072SC _ ME 1,29022 30 x 72 BTMOT30072SC _ ME 1,30026 36 x 72 BTMOT36072SC _ ME 1,340

pneumatic 18 24 x 42 BTMOT24042SN _ ME 2,280counter balance 18 24 x 54 BTMOT24054SN _ ME 2,300

18 24 x 60 BTMOT24060SN _ ME 2,31018 24 x 66 BTMOT24066SN _ ME 2,33018 24 x 72 BTMOT24072SN _ ME 2,35022 30 x 42 BTMOT30042SN _ ME 2,30022 30 x 54 BTMOT30054SN _ ME 2,32022 30 x 60 BTMOT30060SN _ ME 2,33022 30 x 66 BTMOT30066SN _ ME 2,35022 30 x 72 BTMOT30072SN _ ME 2,36026 36 x 42 BTMOT36042SN _ ME 2,35026 36 x 54 BTMOT36054SN _ ME 2,36026 36 x 60 BTMOT36060SN _ ME 2,38026 36 x 66 BTMOT36066SN _ ME 2,39026 36 x 72 BTMOT36072SN _ ME 2,410

electric 2-stage 18 24 x 72 BTMOT24072SE _ ME 2,19022 30 x 72 BTMOT30072SE _ ME 2,20026 36 x 72 BTMOT36072SE _ ME 2,240

base set model no.

G $0 glides

C + $80 casters


C Crank adjustment (Moto)base height with glides 26" - 43.75" (17.75" range) base height with casters 28" - 45.75"-screw thread adjustment with infinite stop positions-adjust with manual crank handle which slides under table when not in use-maximum lifting load 225 lbs for two columns (T base set)

P Pneumatic counter balance (Moto)base height range with glides 26" - 45.5" (19.5" range)base height range with casters 28" - 47.5"-Frame widths will accomodate tops from 42" - 72" long and 24" - 36" deep. We cannot modify the frame to fit tops that are any other size due to the components used to make the pneumatic counter balance adjustable bases.-Must specify the weight of the top and all accessories that will be used on the bases so that the lift capacity can be set properly.

E Electric adj. 26" - 45.75" (Moto)- touch switch for infinite stop positionsadjustment speed 1.97" per second- simple up-down keypad control- programmable keypad available for $130 list per table, model number OBMOTPROG- maximum lifting load 225 lbs for 2 columns (set of T bases)

Contact [email protected] for complete ordering instructions. Height adjustable bases require a higher level of product understanding and installation.

G $0 glides

For complete model number:insert glide/caster selection :G glides - prices listedC casters, add $80 listP premium casters, add $120 list

ME $0standard metal

Standard metal powder coat finishes (ME)Flat Black, Furniture White, Inner Tone, Light Tone, Medium Tone, and Metallic Silver

** Note that the inner column of Moto and Kenna height adjustable bases are only available in Flat Black, White or Metallic Silver. Note that Moto White is a shade off and a little creamier than Furniture White. The Moto Counter balance and Ratchet height adjustable bases inner and outer columns are only available in Flat Black, Moto White and Metallic Silver.

basesT adjustable height setsZoey, Moto, Keller, Ria, Rosanno, Novi

basesT adjustable height sets

Moto


basebase dim.

max top support list finish

Kenna Single Stage Electric basic up/down switch 22 24 x 48-72 BTKEN24072SE G ME 1,200

28 30 x 48-72 BTKEN30072SE G ME 1,210

programmable switch 22 24 x 48-72 BTKEN24072SP G ME 131028 30 x 48-72 BTKEN30072SP G ME 1330

Kenna Dual Stage Electric basic up/down switch 22 24 x 48-72 BTKEN24072DE G ME 1,330

28 30 x 48-72 BTKEN30072DE G ME 1,350

programmable switch 22 24 x 48-72 BTKEN24072DP G ME 145028 30 x 48-72 BTKEN30072DP G ME 1460

Kenna 90 degree 3 column: (2) T, (1) post base set

basic up/down switch 22 24 x 48-72 BTKE324072SE G ME 1,83028 30 x 48-72 BTKE330072SE G ME 1,840

programmable switch 22 24 x 48-72 BTKE324072SP G ME 195028 30 x 48-72 BTKE330072SP G ME 1960

* top not included Kenna 120 degree 3 column: (2) T, (1) post base set

basic up/down switch 22 24 x 48-60 BTKE124060SE G ME 1,83028 30 x 48-60 BTKE130060SE G ME 1,950

programmable switch 22 24 x 48-60 BTKE124060SP G ME 190028 30 x 48-60 BTKE130060SP G ME 1960

* top not included

base set model no.


ME $0standard metal

SEG Single Stage Electric adj. 27" - 46" (Kenna)DEG Dual Stage Electric adj. 24" - 48" (Kenna)- basic up / down switch / undersurface mount- adjustment speed 1.375" per second

Kenna weight capacity:- maximum lifting load 200 lbs. for (2) T bases - maximum lifting load 250 lbs 3 column configurations with (2) T bases + (1) post base

Kenna horizontal wire manager connects between the two table legs together under the table top*for 2 column versions only - not available for 3 column units, only available in a black finish

48"-60" tops use model # OTWMHAT4860 $80 list66"-72" tops use model # OTWMHAT6672 $110 list

Kenna 23.5" vertical column wire manager-bolts into the independent beam and slides around the upper column-allows wires to hang loose so the table canstill go up and down while organizing them-can be painted to match base color

model # OBTVWMKEN23 $70 list

SPG Single Stage Electric adj. 27" - 46" (Kenna)DPG Dual Stage Electric adj. 24" - 48" (Kenna)-programmable keypad / under surface mount-4 preset programmable heights-shelf stop and container stop feature that will stop raising or lowering the worksurface if there are items above or below the worksurface that could impact the table-digital display- adjustment speed 1.375" per second

basesT adjustable height setsKenna


basebase dim.


Nina Single Stage Electric basic up/down switch 23 24 x 48-72 BTNIN24072SE G ME 1,590

29 30 x 48-72 BTNIN30072SE G ME 1,600

programmable switch 23 24 x 48-72 BTNIN24072SP G ME 173029 30 x 48-72 BTNIN30072SP G ME 1740

* top not included Nina Dual Stage Electric

basic up/down switch 23 24 x 48-72 BTNIN24072DE G ME 182029 30 x 48-72 BTNIN30072DE G ME 1,830

programmable switch 23 24 x 48-72 BTNIN24072DP G ME 1,96029 30 x 48-72 BTNIN24072DP G ME 1,970

* top not included Nina 90 degree 3 column: (2) T, (1) post base set

basic up/down switch 23 24 x 48-72 BTNI324072SE G ME 2,35029 30 x 48-72 BTNI324072SE G ME 2,360

programmable switch 23 24 x 48-72 BTNI324072SP G ME 2,46029 30 x 48-72 BTNI324072SP G ME 2,480

* top not included Nina 120 degree 3 column: (2) T, (1) post base set

basic up/down switch 23 24 x 48-72 BTNI124072SE G ME 2,35029 30 x 48-72 BTNI124072SE G ME 2,360

programmable switch 23 24 x 48-72 BTNI124072SP G ME 2,46029 30 x 48-72 BTNI124072SP G ME 2,480

* top not included

base set model no.


ME $0standard metal

SEG Single Stage Electric adj. 26" - 45" (Nina)DEG Dual Stage Electric adj. 21" - 49" (Nina)- simple up-down keypad control / under surface mount- adjustment speed 1.5" per second

SPG Single Stage Electric adj. 26" - 45" (Nina)DPG Dual Stage Electric adj. 21" - 49" (Nina)-programmable keypad / under surface mount-4 preset programmable heights-shelf stop and container stop feature that will stop raising or lowering the worksurface if there are items above or below the worksurface that could impact the table-digital display

Magnetic wire manager for a square or rectengular column standard dimensions: 17 3/4” length, 2” width, 1.06” depth large area for wire management of multiple power and cord sizes easy installation and reposition to any metal surface** specify metal finish

Model # OBWMMM18 $100 list

Nina Electric height adjustable weight capacity:- maximum lifting load 225 lbs. for (2) T bases or 250 lbs for 3 column configurations with (2) T bases + (1) post base

basebase dim.


Nina Fast Crank 23 24 x 36 BTNIN24036SC G ME 2,02023 24 x 42 BTNIN24042SC G ME 2,03023 24 x 48 BTNIN24048SC G ME 2,04023 24 x 54 BTNIN24054SC G ME 2,05023 24 x 60 BTNIN24060SC G ME 2,06023 24 x 66 BTNIN24066SC G ME 2,07023 24 x 72 BTNIN24072SC G ME 2,080

29 30 x 36 BTNIN30036SC G ME 2,04029 30 x 42 BTNIN30042SC G ME 2,05029 30 x 48 BTNIN30048SC G ME 2,06029 30 x 54 BTNIN30054SC G ME 2,07029 30 x 60 BTNIN30060SC G ME 2,08029 30 x 66 BTNIN30066SC G ME 2,09029 30 x 72 BTNIN30072SC G ME 2,100

base set model no.

ME $0standard metal

Nina Fast Crank-28.5 - 47" height range- adjustment speed 1.125" per 1 revolution- 18.3" stroke length- maximum lifting load 100 lbs. (including top)- crank handle slindes inward to store underneath table top when not in use-available as a single stage, two-column base only

Magnetic wire manager for a square or rectengular column standard dimensions: 17 3/4” length, 2” width, 1.06” depth large area for wire management of multiple power and cord sizes easy installation and reposition to any metal surface** specify metal finish

Model # OBWMMM18 $100 list


basesT adjustable height setsNina

basesT adjustable height sets

Nina


basebase dim.



Zoey 18 20 x 96 BCZOE20096SD _ ME 48021 24 x 96 BCZOE24096SD _ ME 51027 30 x 96 BCZOE30096SD _ ME 550

Capri 16 18 x 96 BCCAP18096SD G ME 40022 24 x 96 BCCAP24096SD G ME 42026 30 x 96 BCCAP30096SD G ME 430

Moto 18 24 x 96 BCMOT24096SD _ ME 69022 30 x 96 BCMOT30096SD _ ME 73026 36 x 96 BCMOT36096SD _ ME 770

Moto 2 18 24 x 96 BCMO224096SD _ ME 57022 30 x 96 BCMO230096SD _ ME 60026 36 x 96 BCMO236096SD _ ME 630

Ria 15 20 x 96 BCRIA20096SD _ __ 55022 24 x 96 BCRIA24096SD _ __ 58027 30 x 96 BCRIA30096SD _ __ 620

Keller 15 20 x 96 BCKEL20096SD _ __ 63022 24 x 96 BCKEL24096SD _ __ 65027 30 x 96 BCKEL30096SD _ __ 710

Novi 18 20 x 96 BCNOV20096SD _ __ 54022 24 x 96 BCNOV24096SD _ __ 56026 30 x 96 BCNOV30096SD _ __ 580

base set model no.

ME $0standard metal

G $0 glides

ME $0standard metal

PO + $120polished

ME $0metalPC + $220polished

For complete model number:1. Insert glide/caster selection : G glides - prices listedC casters, + $80 list P premium casters, + $120 list

2. Insert finish type: ME standard metal, pricing listedPO Polished Aluminum/Chrome - Keller & Ria add $120 listPC Polished Chrome - Novi + $220 list

G $0 glides

C + $80 castersP + $120premium casters

G $0 glides

C + $80 casters

G $0 glides

C + $80 casters


C casters + $80 2" black dual wheel locking (Moto, Moto 2, Ria, Keller and Novi)3" black dual wheel locking (Zoey)

P premium casters + $120 2" silver/black dual wheel locking - (Moto, Moto 2)3" white dual wheel locking (Zoey)


G $0 glidesC + $80 castersH + $100 hidden / concealed casters*


(PC) Polished chrome finish (Novi)


basesC fixed sets


basebase dim.



Zoey with beam 15 20 x 60 BCZOE20060NB _ ME 1,08015 20 x 72 BCZOE20072NB _ ME 1,10021 24 x 60 BCZOE24060NB _ ME 1,10021 24 x 72 BCZOE24072NB _ ME 1,12027 30 x 60 BCZOE30060NB _ ME 1,12027 30 x 72 BCZOE30072NB _ ME 1,140

Moto 2 with beam 18 24 x 60 BCMO224060NB _ ME 1,21018 24 x 72 BCMO230072NB _ ME 1,22022 30 x 60 BCMO230060NB _ ME 1,24022 30 x 72 BCMO230072NB _ ME 1,250

base set model no.

For complete model number:1. Insert glide/caster selection : G glides C casters, see pricing belowP premium casters, see pricing below

Zoey and Moto flip nest bases with a beam do not require top stiffenersThe cost of the top stiffener is included in the standard Symphony top price.

Deduct the following from the list price shown for a top in the top section of the price list -$40 list for tops that are up to 24" deep (1 stiffener)-$80 list for tops that are up to 36" deep (2 stiffeners)

The flip mechanisms vary by base series, contact [email protected] for more information.

ME $0 standard metal

C + $80 casters


G $0 glides

C $0 black casters

P $40 premium


C casters 2" black dual wheel locking (Moto 2 +$80)3" black dual wheel locking (Zoey + $0)

P premium casters 2" silver/black dual wheel locking - (Moto 2 +$120)3" white dual wheel locking (Zoey +$40)

basebase dim.



Keller 15 20 x 72 BCKEL20072NE _ __ 1,05022 24 x 72 BCKEL24072NE _ __ 1,08027 30 x 72 BCKEL30072NE _ __ 1,130

Ria 15 20 x 72 BCRIA20072NE _ __ 98022 24 x 72 BCRIA24072NE _ __ 1,00027 30 x 72 BCRIA30072NE _ __ 1,030

Novi 18 20 x 72 BCNOV20072NE _ __ 1,06022 24 x 72 BCNOV24072NE _ __ 1,07026 30 x 72 BCNOV30072NE _ __ 1,080

base set model no.

ME $0standard metal

PO + $120polished

ME $0standard metal

G $0 glides

C + $80 casters

C casters 2" black dual wheel locking (Keller, Ria, Novi +$80)

KELLER, RIA, ROSANNO AND NOVI SINGLE T FLIP MECH IMAGE:




G glides C casters, see pricing below

2. Insert finish type: ME standard metal, pricing listedPO Polished Aluminum/Chrome - Keller & Ria add $120 list

Note that the Keller, Ria and Novi single column series bases do not have a beam and therefore the bases cannot be spread more than 50" apart at center.

basesC nesting setsZoey, Moto

basesC nesting sets

Keller, Ria, Novi


basebase dim.



Ria spring clip 15 20 x 72 BCRIA20072SS _ ME 83022 24 x 72 BCRIA24072SS _ ME 85027 30 x 72 BCRIA30072SS _ ME 890

Keller spring clip 15 20 x 72 BCKEL20072SS _ ME 91022 24 x 72 BCKEL24072SS _ ME 94027 30 x 72 BCKEL30072SS _ ME 990

Novi spring clip 18 20 x 72 BCKEL20072SS _ ME 81022 24 x 72 BCKEL24072SS _ ME 83026 30 x 72 BCKEL30072SS _ ME 850

Motocrank 18 24 x 72 BCMOT24072SC _ ME 1,340

22 30 x 72 BCMOT30072SC _ ME 1,36026 36 x 72 BCMOT36072SC _ ME 1,390

electric 2-stage 18 24 x 72 BCMOT24072SE G ME 2,26022 30 x 72 BCMOT30072SE G ME 2,27026 36 x 72 BCMOT36072SE G ME 2,290

Kenna Single Stage Electric basic up/down switch 22 24 x 48-72 BCKEN24072SE G ME 1,200

28 30 x 48-72 BCKEN30072SE G ME 1,210

programmable switch 22 24 x 48-72 BCKEN24072SP G ME 131028 30 x 48-72 BCKEN30072SP G ME 1330

base set model no.

G $0 glides

For complete model number:1. Insert glide/caster selection : G glides - prices listedC casters, + $80 list

G $0 glides

C + $80 casters

C casters + $80 2" black dual wheel locking

P premium casters + $120 2" silver/black dual wheel locking - (Moto, Moto 2)


** Note that the inner column of Moto and Kenna height adjustable bases are only available in black, white or metallic silver. Note that Moto White is a shade off and a little creamier than Furniture White.

ME $0standard metal

G $0 glides

C Crank adjustment (Moto)base height with glides 26" - 43.75" (17.75" range) base height with casters 28" - 45.75"-screw thread adjustment with infinite stop positions-adjust with manual crank handle which slides under table when not in use-maximum lifting load 225 lbs for two columns (C base set)

E Electric adj. 26" - 45.75" (Moto)- touch switch for infinite stop positionsadjustment speed 1.97" per second- simple up-down keypad control- programmable keypad available for $130 list per table, model number OBMOTPROG- maximum lifting load 225 lbs for 2 columns (set of C bases)

S Spring clip height adjustment 24.75" - 33.75" (Ria, Keller, Novi) range in 1" incrementsavailable for C base tables up to 30" deep

SEG Single Stage Electric adj. 27" - 46" (Kenna)- basic up / down switch / undersurface mount- adjustment speed 1.375" per second

SPG Single Stage Electric adj. 27" - 46" (Kenna)-programmable keypad / under surface mount-4 preset programmable heights-shelf stop and container stop feature that will stop raising or lowering the worksurface if there are items above or below the worksurface that could impact the table-digital display- adjustment speed 1.375" per second

Kenna weight capacity:- maximum lifting load 200 lbs. for (2) C bases

basesC adjustable height setsRia, Keller, Novi, Moto, Kenna

basesC adjustable height sets


basebase dim.

max top support list glide/caster finish

Zoey 21 x 21 24 x 24, 24 rd BXZOE24024SD _ ME 52027 x 27 30 x 30, 36 rd BXZOE30030SD _ ME 55033 x 33 36 x 36, 42 rd BXZOE36036SD _ ME 580

offset X 21 x 27 24 x 30 BXZOE24030SD _ ME 46027 x 33 30 x 36 BXZOE30036SD _ ME 470

Ria 20 x 20 24 x 24, 24 rd BXRIA24024SD _ __ 43026 x 26 30 x 30, 36 rd BXRIA30030SD _ __ 46033 x 33 36 x 36, 42 rd BXRIA36036SD _ __ 54038 x 38 42 x 42, 48 rd BXRIA42042SD _ __ 600

offset X 20 x 26 24 x 30 BXRIA24030SD _ __ 44020 x 33 24 x 36 BXRIA24036SD _ __ 47020 x 38 24 x 42 BXRIA24042SD _ __ 52026 x 33 30 x 36 BXRIA30036SD _ __ 52026 x 38 30 x 42 BXRIA30042SD _ __ 57033 x 38 36 x 42 BXRIA36042SD _ __ 580

Y 20 x 20 24 x 24, 24 rd BYRIA24024SD _ __ 42026 x 26 30 x 30, 30 rd BYRIA30030SD _ __ 47033 x 33 36 x 36, 36 rd BYRIA36036SD _ __ 490

Keller 20 x 20 24 x 24, 24 rd BXKEL24024SD _ __ 51026 x 26 30 x 30, 36 rd BXKEL30030SD _ __ 56033 x 33 36 x 36, 42 rd BXKEL36036SD _ __ 60038 x 38 42 x 42, 48 rd BXKEL42042SD _ __ 700

offset X 20 x 26 24 x 30 BXKEL24030SD _ __ 55020 x 33 24 x 36 BXKEL24036SD _ __ 57020 x 38 24 x 42 BXKEL24042SD _ __ 66026 x 33 30 x 36 BXKEL30036SD _ __ 59026 x 38 30 x 42 BXKEL30042SD _ __ 57033 x 38 36 x 42 BXKEL36042SD _ __ 690

Y 20 x 20 24 x 24, 24 rd BYKEL24024S _ __ 48026 x 26 30 x 30, 30 rd BYKEL30030S _ __ 51033 x 33 36 x 36, 36 rd BYKEL36036S _ __ 550

base model no.

ME $0standard metal

G $0 glides

C + $80 casters


ME $0standard metal

PO + $80polished

For complete model number:1. Insert glide/caster selection : G glides - prices listedC casters - add $80 list P premium casters - add $120 list (Zoey + Moto)

2. Insert finish type: ME standard metal- pricing listedPO premium Polished Aluminum/Chrome - Keller & Ria, add $80 list

G $0 glides

C + $80 casters

Additional fixed height optons (replace SD in model number with the following:SB Bar height + $80 list SH custom Higher fixed height + $80 list ($160 list for Rosanno, not available with Capri)SL custom Lower fixed height + $80 ($160 list for Rosanno, not available with Capri)

Casters (C)2" black dual wheel locking 3" black dual wheel locking (Zoey)

Standard metal powder coat finishes (ME)Black Wrinkle, Chateau Brown Wrinkle, Flat Black, Furniture White, Inner Tone, Light Tone, Medium Tone and Metallic Silver

Premium Polished FinishesPolished Aluminum/Steel - Keller or Ria - add $80 listPolished Chrome on Novi or Rosanno - add $200 list

Premium Casters (P) 2" silver/black dual wheel locking (Moto)3" white dual wheel locking (Zoey)

X

X

X

basebase dim. max top support list glide/caster finish

Novi 22 x 22 24 x 24, 24 rd BXNOV24024SD _ __ 42026 x 26 30 x 30, 36 rd BXNOV30030SD _ __ 43032 x 32 36 x 36, 42 rd BXNOV36036SD _ __ 48038 x 38 42 x 42, 48 rd BXNOV42042SD _ __ 540

offset X 22 x 26 24 x 30 BXNOV24030SD _ __ 43026 x 36 36 x 48 BXNOV30036SD _ __ 470

Rosanno 26 x 26 30 x 30, 36 rd BXROSD30030SD _ __ 51032 x 32 36 x 36, 42 rd BXROSD36036SD _ __ 55038 x 38 42 x 42, 48 rd BXROSD42042SD _ __ 650

Moto 22 x 22 24 x 24, 30 rd BXMOT24024SD _ ME 56026 x 26 30 x 30, 36 rd BXMOT30030SD _ ME 59032 x 32 36 x 36, 42 rd BXMOT36036SD _ ME 64036 x 36 42 x 42, 48 rd BXMOT42042SD _ ME 660

Capri 22 x 22 24 x 24, 24 rd BXCAP24024SD G ME 39026 x 26 30 x 30, 36 rd BXCAP30030SD G ME 42032 x 32 36 x 36, 42 rd BXCAP36036SD G ME 48038 x 38 42 x 42, 48 rd BXCAP42042SD G ME 540

base model no.

Casters (C)2" black dual wheel locking 3" black dual wheel locking (Zoey)

G $0 glides


Premium Polished FinishesPolished Aluminum/Steel - Keller or Ria - add $80 listPolished Chrome on Novi or Rosanno - add $200 list

Premium Casters (P) 2" silver/black dual wheel locking (Moto)3" white dual wheel locking (Zoey)

ME $0standard metal

PC + $200polished chrome

G $0 glides

C + $80 casters

P + $120 ME $0standard metal

Additional fixed height optons (replace SD in model number with the following:SB Bar height + $80 list SH custom Higher fixed height + $80 list ($160 list for Rosanno, not available with Capri)SL custom Lower fixed height + $80 ($160 list for Rosanno, not available with Capri)

G $0 glides

C + $80 casters

For complete model number:1. Insert glide/caster selection : G glides - prices listedC casters - add $80 list P premium casters - add $120 list (Zoey + Moto)

2. Insert finish type: ME standard metal- pricing listedPC premium Polished Chrome - Novi, / Rosanno add $200

X

X

X

X

basesX and Y fixed Zoey, Ria, Keller

basesX and Y fixed

Novi, Rosanno, Moto, Capri


base dim. max top support list glide/caster finish

Zoey 21 x 21 24 x 24, 24 rd BXZOE24024FD _ ME 72027 x 27 30 x 30, 36 rd BXZOE30030FD _ ME 73033 x 33 36 x 36, 42 rd BXZOE36036FD _ ME 770

Keller 20 x 20 24 x 24, 24 rd BXKEL24024FD _ __ 67026 x 26 30 x 30, 36 rd BXKEL30030FD _ __ 72033 x 33 36 x 36, 42 rd BXKEL36036FD _ __ 75038 x 38 42 x 42, 48 rd BXKEL42042FD _ __ 870

Y 20 x 20 24 x 24, 24 rd BYKEL24024FD _ __ 64026 x 26 30 x 30, 30 rd BYKEL30030FD _ __ 66033 x 33 36 x 36, 36 rd BYKEL36036FD _ __ 710

Ria 20 x 20 24 x 24, 24 rd BXRIA24024FD _ __ 58026 x 26 30 x 30, 36 rd BXRIA30030FD _ __ 65033 x 33 36 x 36, 42 rd BXRIA36036FD _ __ 72038 x 38 42 x 42, 48 rd BXRIA42042FD _ __ 810

nesting flip X 20 x 20 24 x 24, 24 rd BXRIA24024NE _ __ 78026 x 26 30 x 30, 30 rd BXRIA30030NE _ __ 83033 x 33 36 x 36, 36 rd BXRIA36036NE _ __ 88033 x 33 42 rd only BXRIA42000NE _ __ 890

nesting flip offset X 20 x 26 24 x 30 BXRIA24030NE _ __ 82020 x 33 24 x 36 BXRIA24036NE _ __ 87020 x 38 24 x 42 BXRIA24042NE _ __ 940

Y 20 x 20 24 x 24, 24 rd BYRIA24024FD _ __ 57026 x 26 30 x 30, 30 rd BYRIA30030FD _ __ 60033 x 33 36 x 36, 36 rd BYRIA36036FD _ __ 640

Novi 22 x 22 24 x 24, 24 rd BXNOV24024FD _ __ 65026 x 26 30 x 30, 36 rd BXNOV30030FD _ __ 69032 x 32 36 x 36, 42 rd BXNOV36036FD _ __ 760

Rosanno 26 x 26 30 x 30, 36 rd BXROS30030FD _ __ 77032 x 32 36 x 36, 42 rd BXROS36036FD _ __ 83038 x 38 42 x 42, 48 rd* BXROS42042FD _ __ 900

* Rosanno flip top X base with casters cannot exceed a 42" round topMoto 22 x 22 24 x 24, 30 rd BXMOT24024FD _ ME 780

26 x 26 30 x 30, 36 rd BXMOT30030FD _ ME 82032 x 32 36 x 36, 42 rd BXMOT36036FD _ ME 860

base model no.

Casters (C): 2" black dual wheel locking 3" black dual wheel locking (Zoey)

Premium Casters (P): 2" silver/black dual wheel locking (Moto)

ME $0standard metal

C casters $0price listed


G glides $0

Standard metal powder coat finishes (ME):Black Wrinkle, Chateau Brown Wrinkle, Flat Black, Furniture White, Inner Tone, Light Tone, Medium Tone, and Metallic Silver

Premium Polished Finishes:not available on adjustable height basesPO Polished Aluminum/steel - Keller + Ria, add $80 list

For complete flip X base set model number:1. Insert glide/caster selection :G glides - prices listed C casters - see below for upcharge, if applicableP premium casters, see below

2. Insert finish type: ME standard metal - pricing listedPO polished (Keller or Ria) $80 listPC polished chrome (Novi or Rosanno) $200 list

G $0 glides

C + $80 casters

G $0 glides

C + $80 casters


ME $0standard metal

PC + $200polished chrome

ME $0standard metal

ME $0standard metal

PO + $80polished

X

X

X

X

X

X

base dim.max top support list glide/caster

KellerX spring clip 20 x 20 24 x 24, 24 rd BXKEL24024SS _ ME 720

26 x 26 30 x 30, 36 rd BXKEL30030SS _ ME 77033 x 33 36 x 36, 42 rd BXKEL36036SS _ ME 810

Y spring clip 20 x 20 24 x 24, 24 rd BYKEL24024SS _ ME 68026 x 26 30 x 30, 30 rd BYKEL30030SS _ ME 71033 x 33 36 x 36, 36 rd BYKEL36036SS _ ME 750

RiaX spring clip 20 x 20 24 x 24, 24 rd BXRIA24024SS _ ME 640

26 x 26 30 x 30, 36 rd BXRIA30030SS _ ME 72033 x 33 36 x 36, 42 rd BXRIA36036SS _ ME 760

Y spring clip 20 x 20 24 x 24, 24 rd BYRIA24024SS _ ME 61026 x 26 30 x 30, 30 rd BYRIA30030SS _ ME 64033 x 33 36 x 36, 36 rd BYRIA36036SS _ ME 660

Novigas assisted spring clip X 22 x 22 24 x 24, 24 rd BXNOV24024SG _ ME 920

26 x 26 30 x 30, 36 rd BXNOV30030SG _ ME 94032 x 32 36 x 36, 42 rd BXNOV36036SG _ ME 980

Motoratchet X 22 24 x 24, 30 rd BXMOT24024SR _ ME 810

26 30 x 30, 36 rd BXMOT30030SR _ ME 840

crank X 22 24 x 24, 30 rd BXMOT24024SC _ ME 93026 30 x 30, 36 rd BXMOT30030SC _ ME 970

pneumatic counter balance X 22 x 22 24 x 24, 30 rd BXMOT24024SP _ ME 1,10026 x 26 30 x 30, 36 rd BXMOT30030SP _ ME 1,14032 x 32 36 x 36, 42 rd BXMOT36036SP _ ME 1,17036 x 36 42 x 42, 48 rd BXMOT42042SP _ ME 1,200

base model no.

G $0 glides

C + $80 casters

For complete adjustable height X base model number, insert glide/caster type selection :1. Insert glide/caster selection:G glides - prices listedC casters, add $80 list P premium casters, add $120 list (Moto)

SG Gas assisted spring clip height adjustment (Novi )27.75" - 39.75" height range with glides or casters adjustable in 1" increments gas assisted spring allows adjustment of inner column inner column runs on roller bearings

SS Spring clip height adjustment (Keller & Ria)24.75" - 33.75" base height range with glides 26.75" - 35.75" base height range with casterssix heights in 1" increments

G $0 glides

C + $80 casters


R Ratchet height adjustment (Moto)26" - 35.5" base height range with glides 28" - 37.5" base height range with casters 13 positions in 0.78 inch incrementschange positions by manually lifting the table topresets to lowest position when lifted to upper stop

C Crank adjustment (Moto)base height range with glides 26" - 43.75" base height range with casters 28" - 45.75"-screw thread adjustment with infinite stop positions-adjust with manual crank handle which slides under table when not in use

P Pneumatic counter balance (Moto)base height range with glides 26" - 45.5" base height range with casters 28" - 47.5"-Must specify the weight of the top and all Standard metal powder coat finishes (ME):

Black Wrinkle, Chateau Brown Wrinkle, Flat Black, Furniture White, Inner Tone, Light Tone, Medium Tone, and Metallic Silver

Casters (C): 2" black dual wheel locking

Premium Casters (P): 2" silver/black dual wheel locking (Moto)

basesX and Y flip / nesting flipZoey, Keller, Ria, Novi, Rosanno, Moto

basesX and Y adjustable height

Keller, Ria, Novi, Moto


basebase dim.

max top support list glide/caster finish

Ria38 x 38 48 x 48, 60 rd BXRIA480484 D _ __ 1,08046 x 46 54 x 54, 66 rd BXRIA540544 D _ __ 1,13058 x 58 60 x 60, 72 rd BXRIA600604 D _ __ 1,230

Keller38 x 38 48 x 48, 54 rd BXKEL480484 D _ __ 1,21046 x 46 54 x 54, 66 rd BXKEL600604 D _ __ 1,260

Novi36 x 36 54 x 54, 60 rd BXNOV540544 D _ ME 800

Rosanno36 x 36 48 x 48, 60 rd BXROS480484 D _ ME 1,370

Zoey31 x 31 42 x 42, 48 rd BXZO248000RD4 D G ME 1,54035 x 35 54 rd BXZO254000RD4 D G ME 1,56035 x 35 60 rd BXZO260000RD4 D G ME 1,57031 x 31 42 x 42 sq BXZO242042SQ4 D G ME 1,53035 x 35 48 x 48 sq BXZO248048SQ4 D G ME 1,56040 x 40 54 x 54 sq BXZO254054SQ4 D G ME 1,61044 x 44 60 x 60 sq BXZO260060SQ4 D G ME 1,650

base model no.

casters (C)add $100 list2" black dual wheel locking

For complete four column X base model number:1. Insert glide/caster selection :

G glides - prices listedC casters, add $100 list

ME $0standard metal

PO + $300polished

G $0 glides

C + $100 casters

G $0 glides

ME $0standard metal

Standard metal powder coat finishes (ME):Black Wrinkle (BW), Chateau Brown Wrinkle (CB), Flat Black (FB), Furniture White (FW), Inner Tone (IT), Light Tone (LT), Medium Tone (MT), Metallic Silver (MS).

Premium Polished Finishes:PO Polished aluminum/steel (Ria + Keller), add $300 list

basesfour column XRia, Keller, Novi, Rosanno, Zoey


basebase dim. column max top support list height

Bennett *square column16 x 16 3" sq 30 x 30, 36 rd BDBEN30030S _ G ME 66020 x 20 3" sq 36 x 36, 42 rd BDBEN36036S _ G ME 72026 x 26 3" sq 42 x 42, 48 rd BDBEN42042S _ G ME 870

Marius square disc 16 x 16 3" rd 30 x 30, 36 rd BDMAR30030S _ G ME 660

20 x 20 4" rd 36 x 36, 42 rd BDMAR36036S _ G ME 72026 x 26 4" rd 42 x 42, 48 rd BDMAR42042S _ G ME 87024 x 24 6" rd 48 x 48, 48 rd BDMAR48048S _ G ME 1170

rectangle disc 18 x 28 6" rd 36 x 60 BDMAR36060S _ G ME 120024 x 28 6" rd 42 x 60 BDMAR42060S _ G ME 1230

Molly16 x 16 3" rd 30 x 30, 36 rd BDMOL30030S _ G ME 66020 x 20 4" rd 36 x 36, 42 rd BDMOL36036S _ G ME 72026 x 26 4" rd 42 x 42, 48 rd BDMOL42042S _ G ME 870

Nantes II20 3" rd 30 x 30, 36 rd BDNA230030S _ G ME 66024 4" rd 36 x 36, 42 rd BDNA236036S _ G ME 72032 4" rd 42 x 42, 48 rd BDNA242042S _ G ME 87032 6" rd 48 x 48, 60 rd BDNA248048S _ G ME 1,500

Nantes C (with cover)20 3" rd 30 x 30, 36 rd BDNAC30030S _ G PC 136024 4" rd 36 x 36, 42 rd BDNAC36036S _ G PC 144032 4" rd 42 x 42, 48 rd BDNAC42042S _ G PC 1670

Tondometal finish 22 3" rd 30 x 30, 36 rd BDTON30030S _ G ME 730

26 3" rd 36 x 36, 42 rd BDTON36036S _ G ME 800

polished chrome finish 22 3" rd 30 x 30, 36 rd BDTON30030S _ G PC 1,15026 3" rd 36 x 36, 42 rd BDTON36036S _ G PC 1,260

*The Bennett base has a square column, all other disc bases have a round columnReference the above chart for the column dimension

base model no.

Standard metal powder coat finishes (ME):Black Wrinkle (BW), Chateau Brown Wrinkle (CB), Flat Black (FB), Furniture White (FW), Inner Tone (IT), Light Tone (LT), Medium Tone (MT), Metallic Silver (MS).

Premium Polished Finish:PC Polished Chrome (Tondo & Nantes C)

For complete disc base model number:1. Insert height selection :

L custom lower height, specify fixed base height lower than 27.75" H- add $80 listD standard 27.75" H - no upchargeB bar height 40.75" H - add $80 listH custom taller height, specify fixed base height up to 40.75" H- add $80 list

L custom lower ht add $80

D std 27.75" ht. $0

B bar 40.75" ht. add $80

H custom higher ht.add $80

basebase dim. column


Bennett *square columnpneumatic adj ht 16 x 16 sq 30 x 30, 36 rd BDBEN30030S P G ME 1,290

20 x 20 sq 36 x 36, 42 rd BDBEN36036S P G ME 1,36026 x 26 sq 42 x 42, 48 rd BDBEN42042S P G ME 1,500

Nantes IIpneumatic adj ht 20 rd 30 x 30, 36 rd BDNA230030S P G ME 1,240

24 rd 36 x 36, 42 rd BDNA236036S P G ME 1,59032 rd 42 x 42, 48 rd BDNA242042S P G ME 1,740

Tondopneumatic adj ht 22 rd 30 x 30, 36 rd BDTON30030S P G ME 1,630

26 rd 36 x 36, 42 rd BDTON36036S P G ME 2,070

base model no.

Bennett, Nantes II and Tondo Pneumatic Height Adjustable Bases

P Glide (plastic glide guidance) or Roller (steel roller guidance) Lift height adjustment:26.75" - 44.5" base height range (without table top)pneumatic cylinder assist with infinite stop positionsno bounce cylinder stopunintentional release resistant lever with cable release

The weight of the top and all accessories that will be used on the base shall be advised on the purchase order. If the weight is set wrong then it will cause the table to lift up to fast or not work at all. Contac [email protected] for assistance.

Bennett & Nantes II lift capacity can be set at 33, 44, 55 or 66 lbs. for a lift range between 28 - 76 lbs.Tondo lift capacity can be set at 22, 33, or 44 lbs. for a lift range between 18 - 54 lbs.See chart for details:

Standard metal powder coat finishes (ME):Flat Black (FB), Furniture White (FW), Metallic Silver (MS).

basesdiscBennett, Marius, Molly, Nantes II, Nantes, C, Tondo

basesadjustable height disc

Bennett, Nantes II, Tondo


base base dim.base

heightcolumn

dia.max top support

ME. finish list

PC or PO finish list

Nora laptop rounded rectangle 10.5 x 15.5 24.5 1.5 14 x 20 BDNOR142024 O G __ 870 1210

round 14 24.5 1.5 20 rd BDNOR20RD24 O G __ 840 106014 24.5 1.5 20 rd BDNOR20RD24 C G __ 840 1060

rounded square 15.5 24.5 1.5 24 sq BDNOR24SQ24 C G __ 890 1260

Nora occasional round 14 15 1.5 20 rd BDNOR20RD15 C G __ 820 104014 17 1.5 20 rd BDNOR20RD17 C G __ 820 104014 19 1.5 20 rd BDNOR20RD19 C G __ 820 104014 21 1.5 20 rd BDNOR20RD21 C G __ 820 104018 15 1.5 30 rd BDNOR30RD15 C G __ 880 114018 17 1.5 30 rd BDNOR30RD17 C G __ 880 114018 19 1.5 30 rd BDNOR30RD19 C G __ 880 114018 21 1.5 30 rd BDNOR30RD21 C G __ 880 1140

23.75 15 3 42 rd BDNOR42RD15 C G __ 950 123023.75 17 3 42 rd BDNOR42RD17 C G __ 950 123023.75 19 3 42 rd BDNOR42RD19 C G __ 950 123023.75 21 3 42 rd BDNOR42RD21 C G __ 950 1230

rounded square 15.5 15 1.5 24 sq BDNOR24RS15 C G __ 850 121015.5 17 1.5 24 sq BDNOR24RS17 C G __ 850 121015.5 19 1.5 24 sq BDNOR24RS19 C G __ 850 121015.5 21 1.5 24 sq BDNOR24RS21 C G __ 850 121018 15 3 36 sq BDNOR36RS15 C G __ 850 131018 17 3 36 sq BDNOR36RS17 C G __ 850 131018 19 3 36 sq BDNOR36RS19 C G __ 850 131018 21 3 36 sq BDNOR36RS21 C G __ 850 1310

23.75 15 3 42 sq BDNOR42RS15 C G __ 980 149023.75 17 3 42 sq BDNOR42RS17 C G __ 980 149023.75 19 3 42 sq BDNOR42RS19 C G __ 980 149023.75 21 3 42 sq BDNOR42RS21 C G __ 980 1490

rounded rectangle 12 x 18 15 1.5 18 x 24 BDNOR1802415 C G __ 880 125012 x 18 17 1.5 18 x 24 BDNOR1802416 C G __ 880 125012 x 18 19 1.5 18 x 24 BDNOR1802417 C G __ 880 125012 x 18 21 1.5 18 x 24 BDNOR1802421 C G __ 880 1250

Keller fixed height occasional15.25 x 15.25 15 2.25 20 rd BXKEL2002015 G __ 510 59015.25 x 15.25 17 2.25 20 rd BXKEL2002017 G __ 510 59015.25 x 15.25 19 2.25 20 rd BXKEL2002019 G __ 510 59015.25 x 15.25 21 2.25 20 rd BXKEL2002021 G __ 510 590

base model no.

Nora Base Column PositionO Offset ColumnC Centered Column

GlideG Nora plastic glide for carpet and hard floor surfaces, no adjustment

(ME) Standard metal powder coat finishes :Black Wrinkle (BW), Chateau Brown Wrinkle (CB), Flat Black (FB), Furniture White (FW), Inner Tone (IT), Light Tone (LT), Medium Tone (MT), Metallic Silver (MS).(PC) Polished chrome finish (Nora / Nantes / Tondo)(PO) Polished aluminum / chrome finish (Keller / Ria)

FIXED BASE HEIGHT + 1.25" THICK TOP DIMENSIONS

Examples:15" base height + 1.25" top thickness = 16.25" overall table height17" base height + 1.25" top thickness = 18.25" overall table height19" base height + 1.25" top thickness = 20.25" overall table height21" base height + 1.25" top thickness = 22.25" overall table height

For complete model number:1. Insert finish type: ME standard metal- see below chart for pricingPC premium Polished Chrome - (Nora) see below chart for pricingPO premium Polished Aluminum/Chrome - (Keller / Ria) see below chart for pricing

basebase dim. column

max top support

ME. finish list

PC or PO finish list height

Bennett *square column16 x 16 3" sq 30 x 30, 36 rd BDBEN30030S L G ME 74020 x 20 3" sq 36 x 36, 42 rd BDBEN36036S L G ME 80026 x 26 3" sq 42 x 42, 48 rd BDBEN42042S L G ME 950

Marius square disc 16 x 16 3" rd 30 x 30, 36 rd BDMAR30030S L G ME 74020 x 20 4" rd 36 x 36, 42 rd BDMAR36036S L G ME 80026 x 26 4" rd 42 x 42, 48 rd BDMAR42042S L G ME 95024 x 24 6" rd 48 x 48, 48 rd BDMAR48048S L G ME 1250

rectangle disc 18 x 28 6" rd 36 x 60 BDMAR36060S L G ME 128024 x 28 6" rd 42 x 60 BDMAR42060S L G ME 1310

Molly 16 x 16 3" rd 30 x 30, 36 rd BDMOL30030S L G ME 74020 x 20 4" rd 36 x 36, 42 rd BDMOL36036S L G ME 80026 x 26 4" rd 42 x 42, 48 rd BDMOL42042S L G ME 950

Moto *square column 22 x 22 3" sq 24 x 24, 24 rd BXMOT24024S L G ME 64026 x 26 3" sq 30 x 30, 36 rd BXMOT30030S L G ME 67032 x 32 3" sq 36 x 36, 42 rd BXMOT36036S L G ME 72036 x 36 3" sq 42 x 42, 48 rd BXMOT42042S L G ME 740

Zoey 21 x 21 n/a 24 x 24, 24 rd BXZOE24024S L G ME 60027 x 27 n/a 30 x 30, 36 rd BXZOE30030S L G ME 63033 x 33 n/a 36 x 36, 42 rd BXZOE36036S L G ME 660

Keller (PO)20 x 20 2.25" rd 24 x 24, 24 rd BXKEL24024S L G __ 590 67026 x 26 2.25" rd 30 x 30, 36 rd BXKEL30030S L G __ 640 72033 x 33 2.25" rd 36 x 36, 42 rd BXKEL36036S L G __ 680 76038 x 38 2.25" rd 42 x 42, 48 rd BXKEL42042S L G __ 780 860

Ria (PO)20 x 20 2.25" rd 24 x 24, 24 rd BXRIA24024S L G __ 510 59026 x 26 2.25" rd 30 x 30, 36 rd BXRIA30030S L G __ 540 62033 x 33 2.25" rd 36 x 36, 42 rd BXRIA36036S L G __ 620 70038 x 38 2.25" rd 42 x 42, 48 rd BXRIA42042S L G __ 680 760

Nantes II20 3" rd 30 x 30, 36 rd BDNA230030S L G ME 74024 4" rd 36 x 36, 42 rd BDNA236036S L G ME 80032 4" rd 42 x 42, 48 rd BDNA242042S L G ME 950

Nantes C (with cover) (PC)20 3" rd 30 x 30, 36 rd BDNA230030S L G PC 74024 4" rd 36 x 36, 42 rd BDNA236036S L G PC 80032 4" rd 42 x 42, 48 rd BDNA242042S L G PC 950

Tondo (PC)22 3" rd 30 x 30, 36 rd BDTON30030S L G __ 810 1,23026 3" rd 36 x 36, 42 rd BDTON36036S L G __ 880 1,340

Reference the above chart for the column shape and dimension

base model no.

L Specify custom lower base height. Note that a standard PVEA PVC edge top will add 1.25" to the overall height of the table

Examples:16.75" base height + 1.25" top thickness = 18" overall table height18.75" base height + 1.25" top thickness = 20" overall table height

Lcustom lower ht

Specify custom lower height

(PO / PC) finishes NOT available on these bases

For complete model number:1. Insert finish type: ME standard metal- see below chart for pricingPC premium Polished Chrome - (Nora) see below chart for pricingPO premium Polished Aluminum/Chrome - (Keller / Ria) see below chart for pricing

2. L Specify custom LOWER FIXED base height

N/A

N/A


(PC) Polished chrome finish (Nora / Nantes / Tondo)

baseslaptop and occasionalNora, Keller

baseslaptop and occasional

Bennett, Marius, Molly, Moto, Zoey, Keller, Ria, Nantes II, Nantes C, Tondo


Bassa W x D x H qtymax top support base set model no. solid metal (SM) list perf metal (PM) list

rectangular frame

18 x 6 x 27.75" 2 36 x 96 BFBAS36096REG _ _ 3,350 3,40018 x 6 x 27.75" 3 36 x 144 BFBAS36144REG _ _ 5,020 5,11018 x 6 x 27.75" 4 36 x 192 BFBAS36192REG _ _ 6,690 6,810



curved frame W x D x H qtymax top support base set model no. solid metal (SM) list perf metal (PM) list

20 x 6 x 27.75" 2 36 x 96 BFBAS36096CUG _ _ 3,340 3,38020 x 6 x 27.75" 3 36 x 144 BFBAS36144CUG _ _ 5,010 5,07020 x 6 x 27.75" 4 36 x 192 BFBAS36192CUG _ _ 6,680 6,760



*laminate panels are available, email [email protected] for pricing

T

For complete Bassa model number insert panel selection:SM solid metal, PM perforated metal*laminate panels are available, email [email protected] for pricing

(ME) Standard metal powder coat finishes :Flat Black (FB), Furniture White (FW), Inner Tone (IT), Light Tone (LT), Medium Tone (MT), Metallic Silver (MS).

Tambo

HPL (A) HPL (B) HPL (C) HPL (A) HPL (B) HPL (C)

Lastra W x D qtymax top support

base set model no. list list list list list list

rectangle 18 x 6 2 36 x 96 BLLAR36096 __ 2 GL __ 1,260 1,310 1,530 1,440 1,610 1,9003 36 x 144 BLLAR36144 __ 3 GL __ 1,890 1,960 2,300 2,160 2,420 2,8504 36 x 192 BLLAR36192 __ 4 GL __ 2,500 2,620 3,060 3,080 3,230 3,800

18 x 12 2 36 x 108 BLLAR36108 __ 2 GL __ 1,360 1,420 1,670 1,810 1,900 2,2403 36 x 156 BLLAR36156 __ 3 GL __ 2,040 2,130 2,500 2,710 2,840 3,3604 36 x 228 BLLAR36228 __ 4 GL __ 2,700 2,840 3,330 3,610 3,790 4,480





square 18 x 18 2 42 x 120 BLLAS42120 __ 2 GL __ 1,890 1,910 2,250 2,080 2,110 2,4903 42 x 192 BLLAS42192 __ 3 GL __ 2,840 2,860 3,370 3,120 3,150 3,720

24 x 24 2 48 x 132 BLLAS42132 __ 2 GL __ 1,980 2,010 2,350 2,180 2,200 2,5803 48 x 204 BLLAS48204 __ 3 GL __ 2,980 3,000 3,510 3,260 3,290 3,860

30 x 30 2 60 x 192 BLLAS60192 __ 2 GL __ 2,260 2,290 2,680 2,640 2,670 3,1303 60 x 216 BLLAS60216 __ 3 GL __ 3,400 3,420 4,000 3,960 3,990 4,680

* Lastra rectangle and square interior base dimensions are 1.5" less than the "W x D" dimension listed above for each base

* the bottom of the Lastra base is open to the floor

base set HPL (A) HPL (B) HPL (C) HPL (A) HPL (B) HPL (C)W x D Qty max top model no. list list list list list list

cylinder 18 2 42 x 120 BLTAM42120 __ 2 GL __ 1,720 1,890 2,060 2,030 2,230 2,43018 3 42 x 192 BLTAM42192 __ 3 GL __ 2,580 2,840 3,100 3,040 3,350 3,65024 2 48 x 132 BLTAM48132 __ 2 GL __ 2,260 2,490 2,710 2,660 2,930 3,19024 3 48 x 204 BLTAM48204 __ 3 GL __ 3,390 3,730 4,070 3,990 4,390 4,79030 2 60 x 192 BLTAM60192 __ 2 GL __ 2,680 2,950 3,210 3,150 3,470 3,78030 3 60 x 216 BLTAM60216 __ 3 GL __ 4,020 4,420 4,820 4,730 5,200 5,670

27.75" high (D) 40.75" high (H)

27.75" high (D) 40.75" high (H)

For complete Lastra or Tambo model number:1. insert height selection:D standard 27.75" high H 40.75" higher version

2. insert laminate grade selection:A grade A laminateB grade B laminateC grade C laminate

Tambo

Tambo laminate base options:10 x 10 side hinged curved access door for a cylinder base, model # OBLTAMWMD - $550 list per door50 LB ballast bag, model # OBLTAMBAL - $160 list per bag

* Tambo cylinder bases have 4 metal top plates to mount the base to the top, there is a 9.5" hole centered at the top and bottom of the base. Tambo bases do not come with wire management mouse holes.

Lastra hinged access door option:14.75"H hinged access door (1) for a seated height base, model # OBLASDH129 - $170 list each15.75"H hinged access door (1) for a standing height base, model # OBLASDH142 - $190 list each

Lastra wire management mouse holes come on BOTH SIDES at the top / center of all bases in the set unless the base is specified with no wire management mouse holes, please indicate that you do not want mouse holes on one or both sides of the base in bold face ALL CAPS on your PO.


basesconference setsBassa

basesconference sets

Lastra, Tambo


HPL (A) HPL (B) HPL (C)

length width height model no. list list list36 6 27.75 AMW360628FUT_ 970 1,010 1,14042 6 27.75 AMW420628FUT_ 1,270 1,330 1,50048 6 27.75 AWM480628FUT_ 1,290 1,360 1,52054 6 27.75 AWM540628FUT_ 1,490 1,570 1,76060 6 27.75 AMW600628FUT_ 1,510 1,590 1,780

36 10 27.75 AMW361028FUT_ 1,040 1,090 1,22042 10 27.75 AMW421028FUT_ 1,370 1,430 1,61048 10 27.75 AMW481028FUT_ 1,390 1,450 1,63054 10 27.75 AMW541028FUT_ 1,600 1,680 1,89060 10 27.75 AMW601028FUT_ 1,620 1,700 1,910

36 12 27.75 AMW361228FUT_ 1,060 1,110 1,24042 12 27.75 AMW421228FUT_ 1,420 1,490 1,67048 12 27.75 AMW481228FUT_ 1,440 1,510 1,69054 12 27.75 AMW541228FUT_ 1,700 1,780 2,00060 12 27.75 AMW601228FUT_ 1,720 1,780 2,000

For complete under table media base model number, insert laminate grade selection:A grade A laminate (HPL)B grade B laminate (HPL)C grade C laminate (HPL)

Under Table Media Wall back options:

Solid back, model number OMWSOBK - $0 listBack with (1) grommet, model number OMWGR1BK - $30 listBack with (1) cut out, model number OMWCO1BK - $50 list

solid back back with grommet back with cut out

Please make sure to specify a back option:SolidBack with (1) grommet, Back with (1) cut out,


Under Table Media Base standard specifications

Please make sure to specify a back option:Solid back, model number OMWSOBK - $0 listBack with (1) grommet, model number OMWGR1BK - $30 listBack with (1) cut out, model number OMWCO1BK - $50 list

basesunder table media

basesunder table media



length width height model no. list list list36 6 72 AMW360672FWM_ 2,190 2,350 2,57042 6 72 AMW420672FWM_ 2,270 2,440 2,72048 6 72 AWM480672FWM_ 2,300 2,460 2,75054 6 72 AWM540672FWM_ 2,680 2,870 3,19060 6 72 AMW600672FWM_ 2,960 3,210 3,550

36 10 72 AMW361072FWM_ 2,330 2,500 2,74042 10 72 AMW421072FWM_ 2,450 2,620 2,94048 10 72 AMW481072FWM_ 2,470 2,650 2,96054 10 72 AMW541072FWM_ 2,890 3,080 3,44060 10 72 AMW601072FWM_ 3,170 3,430 3,800

36 12 72 AMW361272FWM_ 2,550 2,730 3,00042 12 72 AMW421272FWM_ 2,720 2,900 3,26048 12 72 AMW481272FWM_ 2,740 2,930 3,28054 12 72 AMW541272FWM_ 3,200 3,410 3,82060 12 72 AMW601272FWM_ 3,480 3,750 4,170

For complete under table media base model number:1. insert laminate grade selection:A grade A laminate (HPL)B grade B laminate (HPL)C grade C laminate (HPL)

72"H Media Wall back options:

Solid back, model number OMWSOBK - $0 listBack with (2) grommets, model number OMWGR2BK - $60 listBack with (1) cut out, model number OMWCO1BK - $50 list

Formica + Wilsonart HPL laminate finish grades listed on pages 18-25. For additional laminate grades,

72"H Media Wall standard specifications

*84 inch high Media Walls are available if youneed a larger space above the worksurfacefor standing height tables

Vesa Mount60 lb. weight capacityholds screens 32" - 60"black finish

Please make sure to specify a back option:Solid back, model number OMWSOBK - $0 listBack with (2) grommets, model number OMWGR2BK - $60 listBack with (1) cut out, model number OMWCO1BK - $50 list

Media Wall Media Wall


Bassa W x D x H qtytop

depth

max top length when used with

media wall SINGLE base model no.solid metal (SM)

list perf metal (PM) listrectangular frame 18 x 6 x 27.75 1 36 72 BFBAS36000REG _ _ 1,670 1,700

24 x 6 x 27.75 1 48 72 BFBAS48000REG _ _ 1,720 1,74034 x 6 x 27.75 1 60 72 BFBAS60000REG _ _ 1,830 1,940

curved frame 20 x 6 x 27.75 1 36 72 BFBAS36000CUG _ _ 1,670 1,69026 x 6 x 27.75 1 48 72 BFBAS48000CUG _ _ 1,710 1,73036 x 6 x 27.75 1 60 72 BFBAS60000CUG _ _ 1,900 1,900

max top lengthwhen used with

base dimension qty top depth media wall single base model no. list finishZoey

single column 27 x 27.75H 1 36 72 BTZOE36000SDGME 27033 x 27.75H 1 42 72 BTZOE42000SDGME 290

double column 38 x 27,75H 1 48 72 BTZOE480002DGME 55047 x 27.75H 1 60 72 BTZOE600002DGME 600

Moto 3"single column 26 x 27.75H 1 36 72 BTMOT36000SDGME 380

double column 26 x 27.75H 1 36 72 BTMOT360002DGME 53032 x 27,75H 1 42 72 BTMOT420002DGME 56036 x 27.75H 1 48 72 BTMOT480002DGME 600

Riasingle column 26 x 27.75H 1 36 72 BTRIA36000SDG__ 310

33 x 27.75H 1 42 72 BTRIA42000SDG__ 37038 x 27.75H 1 48 72 BTRIA48000SDG__ 430

double column 34 x 27.75H 1 48 72 BTRIA480002DG__ 46040 x 27.75H 1 60 72 BTRIA600002DG__ 500

Kellersingle column 26 x 27.75H 1 36 72 BTRIA36000SDG__ 410

33 x 27.75H 1 42 72 BTRIA42000SDG__ 48038 x 27.75H 1 48 72 BTRIA48000SDG__ 540

double column 34 x 27.75H 1 48 72 BTRIA480002DG__ 55040 x 27.75H 1 60 72 BTRIA600002DG__ 600

For complete Bassa model number insert panel selection:SM solid metal, PM perforated metal*laminate panels are available, email [email protected] for pricing

T

ME $0standard metal

PO + $60 polished

ME $0standard metal

ME $0standard metal

PO + $130 polished

For complete model number insert finish selection:ME no upchargePO see below for upcharge (Ria and Keller only)

ME $0standard metal

PO + $60 polished

ME $0standard metal

PO + $130 polished

(ME) Standard metal powder coat finishes :Flat Black (FB), Furniture White (FW), Inner Tone (IT), Light Tone (LT), Medium Tone (MT), Metallic Silver (MS).(PO) polished aluminum / chrome finish option (Ria or Keller) - upcharges apply, see chart for details

Custom height base for Keller, Ria, and Moto double column only - + $140 list Custom lower and taller fixed height options are available for double column tables with a top size up to 48 x 72 when used with a media wall or media base.For a custom taller fixed height on a double column base, replace the "2D" in the model number for "2H"

Custom height base for Keller, Ria, and Moto single column only - + $70 list Custom taller fixed height options are available for single column tables with a top size up to 36 x 72 when used with a media wall or media base. For a custom taller fixed height on a single column base, replace the "SD" in the model number for "SH"


Lastra W x D x H qtytop

depth

max top length when used with a

media wall SINGLE base model no. list list listrectangle 18 x 6 x 27.75 1 36 72 BLLAR36000 D 1 GL __ 630 650 770

18 x 6 x 40.75 1 36 72 BLLAR36000 H 1 GL __ 720 810 95018 x 12 x 27.75 1 36 84 BLLAR36000 D 1 GL __ 680 710 83018 x 12 x 40.75 1 36 84 BLLAR36000 H 1 GL __ 900 950 1,12024 x 6 x 27.75 1 48 72 BLLAR48000 D 1 GL __ 730 760 88024 x 6 x 40.75 1 48 72 BLLAR48000 H 1 GL __ 910 830 97024 x 12 x 27.75 1 48 84 BLLAR48000 D 1 GL __ 770 800 94024 x 12 x 40.75 1 48 84 BLLAR48000 H 1 GL __ 1,070 1,120 1,32030 x 6 x 27.75 1 60 72 BLLAR60000 D 1 GL __ 850 890 1,04030 x 6 x 40.75 1 60 72 BLLAR60000 H 1 GL __ 930 970 1,14030 x 12 x 27.75 1 60 84 BLLAR60000 D 1 GL __ 900 940 1,09030 x 12 x 40.75 1 60 84 BLLAR60000 H 1 GL __ 1,362 1,430 1,690

square 18 x 18 x 27.75 1 36 84 BLLAS36036 D 1 GL __ 950 970 1,14018 x 18 x 40.75 1 30 72 BLLAS30030 H 1 GL __ 1,040 1,060 1,25020 x 20 x 27.75 1 42 84 BLLAS42042 D 1 GL __ 970 990 1,16020 x 20 x 40.75 36 72 BLLAS36036 H 1 GL __ 1,060 1,090 1,28024 x 24 x 27.75 1 48 90 BLLAS48048 D 1 GL __ 990 1,010 1,19024 x 24 x 40.75 1 42 78 BLLAS42042 H 1 GL __ 1,090 1,110 1,30030 x 30 x 27.75 1 54 96 BLLAS54054 D 1 GL __ 1,130 1,160 1,35030 x 30 x 40.75 1 48 84 BLLAS48048 H 1 GL __ 1,320 1,340 1,58036 x 36 x 27.75 1 60 102 BLLAS60060 D 1 GL __ 1,290 1,310 1,53036 x 36 x 40.75 1 54 90 BLLAS54054 H 1 GL __ 1,560 1,580 1,860* Lastra rectangle and square interior base dimensions are 1.5" less than the "W x D" dimension listed above for each base


18 dia x 27.75 1 36 84 BLTAM36036 D 1 GL __ 860 950 1,03018 dia x 40.75 1 30 72 BLTAM30030 H 1 GL __ 1,010 1,120 1,220

cylinder 20 dia x 27.75 1 42 84 BLTAM42042 D 1 GL __ 1,020 1,130 1,23020 dia x 40.75 36 72 BLTAM36036 H 1 GL __ 1,200 1,320 1,45024 dia x 27.75 1 48 90 BLTAM48048 D 1 GL __ 1,130 1,240 1,36024 dia x 40.75 1 42 78 BLTAM42042 H 1 GL __ 1,330 1,460 1,60030 dia x 27.75 1 54 96 BLTAM54054 D 1 GL __ 1,340 1,470 1,61030 dia x 40.75 1 48 84 BLTAM48048 H 1 GL __ 1,580 1,730 1,89036 dia x 27.75 1 60 102 BLTAM60060 D 1 GL __ 1,790 1,960 2,14036 dia x 40.75 1 54 90 BLTAM54054 H 1 GL __ 2,090 2,300 2,510

Tambo





For complete Lastra or Tambo model number:1. insert height selection:D standard 27.75" high,H 40.75" higher version



basessingle base to use at the other end of a table with a under table media base or media wall

basessingle base to use at the other end of a table with a

under table media base or media wall



W x D x H qty max top support model no. list list listcylinder 18 dia x 27.75 1 36 x 36, 42 rd BLTAM36036 D 1 GL __ 860 950 1,030

18 dia x 40.75 1 30 x 30, 36 rd BLTAM30030 H 1 GL __ 1,010 1,120 1,22020 dia x 27.75 1 42 x 42, 48 rd BLTAM42042 D 1 GL __ 1,020 1,130 1,23020 dia x 40.75 1 36 x 36, 42 rd BLTAM36036 H 1 GL __ 1,200 1,320 1,45024 dia x 27.75 1 48 x 48, 60 rd BLTAM48048 D 1 GL __ 1,130 1,240 1,36024 dia x 40.75 1 42 x 42, 48 rd BLTAM42042 H 1 GL __ 1,330 1,460 1,60030 dia x 27.75 1 54 x 54, 66 rd BLTAM54054 D 1 GL __ 1,340 1,470 1,61030 dia x 40.75 1 48 x 48, 54 rd BLTAM48048 H 1 GL __ 1,580 1,730 1,89036 dia x 27.75 1 60 x 60, 72 rd BLTAM60060 D 1 GL __ 1,790 1,960 2,14036 dia x 40.75 1 54 x 54, 60 rd BLTAM54054 H 1 GL __ 2,090 2,300 2,510

HPL (A) HPL (B) HPL (C)W x D x H qty max top support model no. list list list

square 18 x 18 x 27.75 1 36 x 36, 42 rd BLLAS36036 D 1 GL __ 950 970 1,14018 x 18 x 40.75 1 30 x 30, 36 rd BLLAS30030 H 1 GL __ 1,040 1,060 1,25020 x 20 x 27.75 1 42 x 42, 48 rd BLLAS42042 D 1 GL __ 970 990 1,16020 x 20 x 40.75 1 36 x 36, 42 rd BLLAS36036 H 1 GL __ 1,060 1,090 1,28024 x 24 x 27.75 1 48 x 48, 60 rd BLLAS48048 D 1 GL __ 990 1,010 1,19024 x 24 x 40.75 1 42 x 42, 48 rd BLLAS42042 H 1 GL __ 1,090 1,110 1,30030 x 30 x 27.75 1 54 x 54, 66 rd BLLAS54054 D 1 GL __ 1,130 1,160 1,35030 x 30 x 40.75 1 48 x 48, 54 rd BLLAS48048 H 1 GL __ 1,320 1,340 1,58036 x 36 x 27.75 1 60 x 60, 72 rd BLLAS60060 D 1 GL __ 1,290 1,310 1,53036 x 36 x 40.75 1 54 x 54, 60 rd BLLAS54054 H 1 GL __ 1,560 1,580 1,860

* Lastra rectangle and square interior base dimensions are 1.5" less than the "W x D" dimension listed above for each base


For complete Tambo or Lastra Square model number:1. insert height selection:D standard 27.75" highH 40.75" higher version


Lastra

Tambo







W x D x H qty max top support model no. list51 x 51 x 27.75 1 54 x 54, 60 rd BMKEL540544DGME 2,78056 x 56 x 27.75 1 60 x 60, 72 rd BMKEL600604DGME 2,82051 x 51 x 34.75 1 54 x 54, 60 rd BMKEL540544CGME 2,82056 x 56 x 34.75 1 60 x 60, 72 rd BMKEL600604CGME 2,87051 x 51 x 40.75 1 54 x 54, 60 rd BMKEL540544BGME 2,88051 x 51 x 40.75 1 60 x 60, 72 rd BMKEL600604BGME 2,950

W x D x H qty max top support model no. list51 x 51 x 27.75 1 54 x 54, 60 rd BMRIA540544DGME 2,61056 x 56 x 27.75 1 60 x 60, 72 rd BMRIA600604DGME 2,63051 x 51 x 34.75 1 54 x 54, 60 rd BMRIA540544CGME 2,69056 x 56 x 34.75 1 60 x 60, 72 rd BMRIA600604CGME 2,71051 x 51 x 40.75 1 54 x 54, 60 rd BMRIA540544BGME 2,92051 x 51 x 40.75 1 60 x 60, 72 rd BMRIA600604BGME 2,940

Keller media base with perforated metal panels

Ria media base with perforated metal panels


* polished finish is not available for Keller or Ria Media bases with perforated metal panels

Ria and Keller bases feature a 10.5 x 10.5 " enclosure with the perforated metal panels.

Media Table Wall Support Bracket

Shall be used in peninsula applications for top sizes up to 48 x 60 for the 51 x 51 base or tops up to 60 x 72 with the 56 x 56 inch Ria or Keller Media base. Wall bracket must be secured to the wall studs with 5/16 diameter screws, dealer/installer shall provide the hardware. Finish is Furniture White

Use the 33-7/8" long bracket for tops that are 42" - 48" where the top connects to the wall, model #OBMWB48, $320 list each

Use the 50" long bracket for tops that are 54" - 60" where the top connects to the wall, model #OBMWB60, $410 list each

basessingle conference base for round or square topTambo, Lastra

basesmedia base for a round or square top

Keller, Ria


versionbase qty +

dim. stretchermax top support base set model no. list

glide/caster option(s)

finish option(s)

V fixed with stretcher (2) 17.5 40 24 x 60 BVKE224060SD _ ___ 920(2) 23 40 30 x 60 BVKE230060SD _ ___ 970(2) 29 34 36 x 60 BVKE236060SD _ ___ 1,120(2) 33.5 34 48 x 60 BVKE248060SD _ ___ 1,250

(2) 17.5 50 24 x 72 BVKE224072SD _ ___ 960(2) 23 50 30 x 72 BVKE230072SD _ ___ 1,010(2) 29 40 36 x 72 BVKE236072SD _ ___ 1,130(2) 33.5 40 48 x 72 BVKE248072SD _ ___ 1,260

(2) 23 64 30 x 84 BVKE230084SD _ ___ 1,080(2) 29 50 36 x 84 BVKE236084SD _ ___ 1,170(2) 33.5 50 48 x 84 BVKE248084SD _ ___ 1,300

(2) 23 76 30 x 96 BVKE230096SD _ ___ 1,170(2) 29 58 36 x 96 BVKE236096SD _ ___ 1,230(2) 33.5 58 48 x 96 BVKE248096SD _ ___ 1,350

X four column fixed 27.75H 38 x 38 n/a 48 x 48, 60 rdBXKEL480484D _ ___ 1,21046 x 46 n/a 60 x 60, 72 rdBXKEL600604D _ ___ 1,260

custom taller height 38 x 38 n/a 48 x 48, 60 rdBXKEL480484H _ ___ 1,43046 x 46 n/a 60 x 60, 72 rdBXKEL600604H _ ___ 1,480

cran

ratche

telect

pneu

cran

kratche

telect

pneu

matic

pneu

mati

ratche

tratche

tratche

t

G $0 glides

C + $80 casters

For complete model number:1. Insert glide/caster selection : G glides - prices listedC casters - add $80 list

2. Insert finish type: ME standard metal- pricing listedPO premium Polished Aluminum/Chrome - see upcharge below

cranratche

t

Casters (C)2" black dual wheel locking + $80 list


PO + $300 polished


Premium Polished Finishes (PO)Polished Aluminum/Steel - Keller V bases (2) with stretcher or Four column X + $300 list

Fixed lower height: replace "SD" in model number with "SL", add following "list" upcharge:X or Y base $80 list four column X base $300V base set (2 bases) $140

SPECIFY CUSTOM LOWER BASE HEIGHT, NOTE THAT THE PVC EDGE TOPS ARE 1.25" THICK

Fixed higher height: replace "SD" in model number with "SH", add following "list" upcharge:X or Y base +$80 four column X base +$300V base set (2 bases) +$140

SPECIFY CUSTOM TALLER BASE HEIGHT, NOTE THAT THE PVC EDGE TOPS ARE 1.25" THICK

version qty + dim.max top support base set model no. list


finish option(s)

X fixed 20 x 20 24 x 24, 24 rd BXKEL24024SD _ ___ 51026 x 26 30 x 30, 36 rd BXKEL30030SD _ ___ 56033 x 33 36 x 36, 42 rd BXKEL36036SD _ ___ 60038 x 38 42 x 42, 48 rd BXKEL42042SD _ ___ 700

custom lower height 20 x 20 24 x 24, 24 rd BXKEL24024SL _ ___ 59026 x 26 30 x 30, 36 rd BXKEL30030SL _ ___ 64033 x 33 36 x 36, 42 rd BXKEL36036SL _ ___ 68038 x 38 42 x 42, 48 rd BXKEL42042SL _ ___ 780

custom higher height 20 x 20 24 x 24, 24 rd BXKEL24024SH _ ___ 59026 x 26 30 x 30, 36 rd BXKEL30030SH _ ___ 64033 x 33 36 x 36, 42 rd BXKEL36036SH _ ___ 68038 x 38 42 x 42, 48 rd BXKEL42042SH _ ___ 780

X offset fixed 20 x 26 24 x 30 BXKEL24030SD _ ___ 55020 x 33 24 x 36 BXKEL24036SD _ ___ 57020 x 38 24 x 42 BXKEL24042SD _ ___ 66026 x 33 30 x 36 BXKEL30036SD _ ___ 59026 x 38 30 x 42 BXKEL30042SD _ ___ 57033 x 38 36 x 42 BXKEL36042SD _ ___ 690

Y fixed 20 x 20 24 x 24, 24 rd BYKEL24024SD _ ___ 48026 x 26 30 x 30, 36 rd BYKEL30030SD _ ___ 51033 x 33 36 x 36, 42 rd BYKEL36036SD _ ___ 550

custom lower height 20 x 20 24 x 24, 24 rd BYKEL24024SL _ ___ 56026 x 26 30 x 30, 36 rd BYKEL30030SL _ ___ 59033 x 33 36 x 36, 42 rd BYKEL36036SL _ ___ 630

G $0 glides

C + $80casters


PO + $80 polished

27.75 high

27.75 high

Power module cone shaped top plate - #OBXWMPCC $300 listmetal cone-shaped top plate conceals and protects center mounted power module in surface. Concealed wires exit down inside the base column and out at the bottom of the base column. Available for single column Keller X and Y basesNote that the cone cannot be made with the polished finish, black or white paint is available for the cone with a polished base. The Circo power unit can be used with this cone wire manager.

Wire management hole set (2) in column - #OBTWMH2G $40 listeach hole is 1.25" x 2.25". Removeable grommets narrows hole to 1.25' diameterAvailable for single column Keller X and Y basesNote that the wire management grommet cannot be made with the polished finish

27.75 high



basesKeller V and double column conference bases

basesKeller X and Y conference bases


versionbase qty +

dim. stretchermax top support base set model no. list


finish option(s)

V fixed with stretcher (2) 17.5 40 24 x 60 BVRI224060SD _ ___ 780(2) 23 40 30 x 60 BVRI230060SD _ ___ 810(2) 29 34 36 x 60 BVRI236060SD _ ___ 960(2) 33.5 34 48 x 60 BVRI248060SD _ ___ 1,060

(2) 17.5 50 24 x 72 BVRI224072SD _ ___ 830(2) 23 50 30 x 72 BVRI230072SD _ ___ 860(2) 29 40 36 x 72 BVRI236072SD _ ___ 970(2) 33.5 40 48 x 72 BVRI248072SD _ ___ 1,070

(2) 23 64 30 x 84 BVRI230084SD _ ___ 920(2) 29 50 36 x 84 BVRI236084SD _ ___ 1,030(2) 33.5 50 48 x 84 BVRI248084SD _ ___ 1,120

(2) 23 76 30 x 96 BVRI230096SD _ ___ 980(2) 29 58 36 x 96 BVRI236096SD _ ___ 1,070(2) 33.5 58 48 x 96 BVRI248096SD _ ___ 1,170

X four column fixed 27.75H 38 x 38 n/a 48 x 48, 60 rdBXRIA480484D _ ___ 1,08046 x 46 n/a 54 x 54, 66 rdBXRIA540544D _ ___ 1,13058 x 58 n/a 60 x 60, 72 rdBXRIA600604D _ ___ 1,230

custom taller height 38 x 38 n/a 48 x 48, 60 rdBXRIA480484H _ ___ 1,38046 x 46 n/a 54 x 54, 66 rdBXRIA540544H _ ___ 1,43058 x 58 n/a 60 x 60, 72 RDBXRIA600604H _ ___ 1,530

cran

ratche

telect

pneu

cran

kratche

telect

pneu

matic

pneu

mati

ratche

tratche

tratche

t

G $0 glides

C + $80 casters



cranratche

t

Casters (C)2" black dual wheel locking + $80 list


PO + $300 polished


Premium Polished Finishes (PO)Polished Aluminum/Steel - Ria V bases (2) with stretcher or Four column X + $300 listPolished Aluminum/Steel - Ria single column X or Y base + $80 list

Fixed lower height: replace "SD" in model number with "SL", add following "list" upcharge:X or Y base $80 list four column X base $300V base set (2 bases) $140

SPECIFY CUSTOM LOWER BASE HEIGHT, NOTE THAT THE PVC EDGE TOPS ARE 1.25" THICK

Fixed higher height: replace "SD" in model number with "SH", add following "list" upcharge:X or Y base $80 four column X base $300V base set (2 bases) $140

SPECIFY CUSTOM TALLER BASE HEIGHT, NOTE THAT THE PVC EDGE TOPS ARE 1.25" THICK

version qty + dim. max top support base set model no. listglide/caster

option(s)finish

option(s)X fixed 20 x 20 24 x 24, 24 rd BXRIA24024SD _ ___ 430

26 x 26 30 x 30, 36 rd BXRIA30030SD _ ___ 46033 x 33 36 x 36, 42 rd BXRIA36036SD _ ___ 54038 x 38 42 x 42, 48 rd BXRIA42042SD _ ___ 600

custom lower height 20 x 20 24 x 24, 24 rd BXRIA24024SL _ ___ 51026 x 26 30 x 30, 36 rd BXRIA30030SL _ ___ 54033 x 33 36 x 36, 42 rd BXRIA36036SL _ ___ 62038 x 38 42 x 42, 48 rd BXRIA42042SL _ ___ 680

custom higher height 20 x 20 24 x 24, 24 rd BXRIA24024SH _ ___ 51026 x 26 30 x 30, 36 rd BXRIA30030SH _ ___ 54033 x 33 36 x 36, 42 rd BXRIA36036SH _ ___ 62038 x 38 42 x 42, 48 rd BXRIA42042SH _ ___ 680

X offset fixed 20 x 26 24 x 30 BXRIA24030SD _ ___ 44020 x 33 24 x 36 BXRIA24036SD _ ___ 47020 x 38 24 x 42 BXRIA24042SD _ ___ 52026 x 33 30 x 36 BXRIA30036SD _ ___ 52026 x 38 30 x 42 BXRIA30042SD _ ___ 57033 x 38 36 x 42 BXRIA36042SD _ ___ 580

Y fixed 20 x 20 24 x 24, 24 rd BYRIA24024SD _ ___ 42026 x 26 30 x 30, 36 rd BYRIA30030SD _ ___ 47033 x 33 36 x 36, 42 rd BYRIA36036SD _ ___ 490

custom lower height 20 x 20 24 x 24, 24 rd BYRIA24024SL _ ___ 50026 x 26 30 x 30, 36 rd BYRIA30030SL _ ___ 55033 x 33 36 x 36, 42 rd BYRIA36036SL _ ___ 570

G $0 stdglides

C + $80 casters


PO + $80 polished

27.75 high

27.75 high

Power module cone shaped top plate - #OBXWMPCC $300 listmetal cone-shaped top plate conceals and protects center mounted power module in surface. Concealed wires exit down inside the base column and out at the bottom of the base column. Available for single column Ria X and Y bases, shall be used with the Circo power module.Note that the cone cannot be made with the polished finish, black or white paint is available for the cone with a polished base.

Wire management hole set (2) in column - #OBTWMH2G $40 listeach hole is 1.25" x 2.25". Removeable grommets narrows hole to 1.25' diameterAvailable for single column Ria X and Y basesNote that the wire management grommet cannot be made with the polished finish.

27.75 high


Premium Polished Finishes (PO)Polished Aluminum/Steel - Ria V bases (2) with stretcher or Four column X + $300 listPolished Aluminum/Steel - Ria single column X or Y base + $80 list

basesRia V and double column conference bases

basesRia X and Y conference bases


versionend base qty + dim.

middle base qty +

dim. stretcher(s)max top support base set model no.

dining height

D 27.75H

bar height

B 40.75H

Y base with stretcher(s) for use with a rectangle top (top is not included in the price)single stretcher (2) 19 n/a (1) 16 24 x 48 BYZO224048RES _ G ME 910 n/a

(2) 19 n/a (1) 29 24 x 60 BYZO224060RES _ G ME 930 1,070(2) 19 n/a (1) 39 24 x 72 BYZO224072RES _ G ME 950 1,090(2) 24 n/a (1) 12 30 x 48 BYZO230048RES _ G ME 920 1,060(2) 24 n/a (1) 24 30 x 60 BYZO230060RES _ G ME 950 1,080(2) 24 n/a (1) 35 30 x 72 BYZO230072RES _ G ME 960 1,100(2) 24 n/a (1) 24 36 x 60 BYZO236060RES _ G ME 1,070 1,210(2) 24 n/a (1) 29 36 x 66 BYZO236066RES _ G ME 1,080 1,220(2) 24 n/a (1) 35 36 x 72 BYZO236072RES _ G ME 1,090 1,230(2) 24 n/a (1) 47 36 x 84 BYZO236084RES _ G ME 1,140 1,270(2) 24 n/a (1) 58 36 x 96 BYZO236096RES _ G ME 1,180 1,320(2) 24 n/a (1) 70 36 x 108 BYZO236108RES _ G ME 1,200 n/a(2) 24 n/a (1) 24 42 x 60 BYZO242060RES _ G ME 1,070 1,210(2) 24 n/a (1) 35 42 x 72 BYZO242072RES _ G ME 1,090 1,230(2) 24 n/a (1) 47 42 x 84 BYZO242084RES _ G ME 1,140 1,270(2) 24 n/a (1) 58 42 x 96 BYZO242096RES _ G ME 1,180 1,320(2) 24 n/a (1) 70 42 x 108 BYZO242108RES _ G ME 1,200 n/a

double stretcher (2) 35 n/a (2) 24 48 x 60 BYZO248060RED _ G ME 1,600 1,690(2) 35 n/a (2) 35 48 x 72 BYZO248072RED _ G ME 1,630 1,710(2) 35 n/a (2) 47 48 x 84 BYZO248084RED _ G ME 1,700 1,920(2) 35 n/a (2) 58 48 x 96 BYZO248096RED _ G ME 1,780 2,000(2) 35 n/a (2) 70 48 x 108 BYZO248108RED _ G ME 1,830 n/a(2) 35 (1) 38 (4) 39 48 x 120 BYZO248120RED _ G ME 2,620 n/a(2) 35 (1) 38 (4) 52 48 x 144 BYZO248144RED _ G ME 2,730 n/a(2) 35 (1) 38 (4) 64 48 x 168 BYZO248168RED _ G ME 2,890 n/a(2) 40 n/a (2) 24 54 x 60 BYZO254060RED _ G ME 1,620 1,840(2) 40 n/a (2) 35 54 x 72 BYZO254072RED _ G ME 1,650 1,870(2) 40 n/a (2) 47 54 x 84 BYZO254084RED _ G ME 1,720 1,940(2) 40 n/a (2) 52 54 x 96 BYZO254096RED _ G ME 1,740 1,970(2) 40 n/a (2) 70 54 x 108 BYZO254108RED _ G ME 1,850 n/a(2) 40 (1) 42 (4) 39 54 x 120 BYZO254120RED _ G ME 2,650 n/a(2) 40 (1) 42 (4) 52 54 x 144 BYZO254144RED _ G ME 2,760 n/a(2) 40 (1) 42 (4) 64 54 x 168 BYZO254168RED _ G ME 2,920 n/a(2) 44 n/a (2) 29 60 x 66 BYZO260066RED _ G ME 1,660 1,880(2) 44 n/a (2) 35 60 x 72 BYZO260072RED _ G ME 1,660 1,890(2) 44 n/a (2) 47 60 x 84 BYZO260084RED _ G ME 1,740 1,960(2) 44 n/a (2) 58 60 x 96 BYZO260096RED _ G ME 1,820 2,040(2) 44 n/a (2) 73 60 x 108 BYZO260108RED _ G ME 1,880 n/a(2) 44 (1) 47 (4) 39 60 x 120 BYZO260120RED _ G ME 2,680 n/a(2) 44 (1) 47 (4) 52 60 x 144 BYZO260144RED _ G ME 2,780 n/a(2) 44 (1) 47 (4) 64 60 x 168 BYZO260168RED _ G ME 2,950 n/a

cran

ratce

pneu

cran

kratche

telect

pneu

matic pneu

ratche

tratche

tratche

tcranratche

t

Standard metal powder coat finishes (ME) Flat Black, Furniture White, Inner Tone, Light Tone, Medium Tone and Metallic Silver

For complete model number:1. Insert height selection : D dining height 27.75"H- see below chart for pricingB bar height 40.75"H - see below chart for pricing

versionend base qty + dim.

middle base qty +

dim. stretcher(s)max top support base set model no.

dining height

D 27.75H

bar height

B 40.75H

Y base with stretcher(s) for use with a Bullet Media top (top is not included in the price)single stretcher (2) 24 n/a (1) 35 36 x 72 BYZO236072BUS _ G ME 1,090 1,230

(2) 24 n/a (1) 24 42 x 60 BYZO242060BUS _ G ME 1,070 1,210(2) 24 n/a (1) 35 42 x 72 BYZO242072BUS _ G ME 1,090 1,230(2) 24 n/a (1) 47 42 x 84 BYZO242084BUS _ G ME 1,140 1,270(2) 24 n/a (1) 58 42 x 96 BYZO242096BUS _ G ME 1,180 1,320

double stretcher (2) 35 n/a (2) 24 48 x 60 BYZO248060BUD _ G ME 1,570 1,790(2) 35 n/a (2) 35 48 x 72 BYZO248072BUD _ G ME 1,620 1,840(2) 35 n/a (2) 47 48 x 84 BYZO248084BUD _ G ME 1,650 1,870(2) 35 n/a (2) 58 48 x 96 BYZO248096BUD _ G ME 1,730 1,950(2) 40 n/a (2) 24 54 x 60 BYZO254060BUD _ G ME 1,590 1,810(2) 40 n/a (2) 35 54 x 72 BYZO254072BUD _ G ME 1,640 1,860(2) 40 n/a (2) 47 54 x 84 BYZO254084BUD _ G ME 1,670 1,890(2) 40 n/a (2) 52 54 x 96 BYZO254096BUD _ G ME 1,740 1,970(2) 44 n/a (2) 29 60 x 66 BYZO260066BUD _ G ME 1,640 1,860(2) 44 n/a (2) 35 60 x 72 BYZO260072BUD _ G ME 1,660 1,880(2) 44 n/a (2) 47 60 x 84 BYZO260084BUD _ G ME 1,680 1,910(2) 44 n/a (2) 58 60 x 96 BYZO260096BUD _ G ME 1,760 1,980

Y base with stretcher(s) for use with a Half Arc End Rectangle top (top is not included in the price) single stretcher (2) 24 n/a (1) 35 36 x 72 BYZO236072HAS _ G ME 1,090 1,230

(2) 24 n/a (1) 24 42 x 60 BYZO242060HAS _ G ME 1,070 1,210(2) 24 n/a (1) 35 42 x 72 BYZO242072HAS _ G ME 1,090 1,230(2) 24 n/a (1) 47 42 x 84 BYZO242084HAS _ G ME 1,140 1,270

double stretcher (2) 35 n/a (2) 24 48 x 60 BYZO248060HAD _ G ME 1,570 1,790(2) 35 n/a (2) 35 48 x 72 BYZO248072HAD _ G ME 1,620 1,840(2) 35 n/a (2) 47 48 x 84 BYZO248084HAD _ G ME 1,650 1,870(2) 35 n/a (2) 58 48 x 96 BYZO248096HAD _ G ME 1,730 1,950(2) 40 n/a (2) 24 54 x 60 BYZO254060HAD _ G ME 1,590 1,810(2) 40 n/a (2) 35 54 x 72 BYZO254072HAD _ G ME 1,640 1,860(2) 40 n/a (2) 47 54 x 84 BYZO254084HAD _ G ME 1,670 1,890(2) 40 n/a (2) 52 54 x 96 BYZO254096HAD _ G ME 1,740 1,970(2) 44 n/a (2) 29 60 x 66 BYZO260066HAD _ G ME 1,640 1,860(2) 44 n/a (2) 35 60 x 72 BYZO260072HAD _ G ME 1,660 1,880(2) 44 n/a (2) 47 60 x 84 BYZO260084HAD _ G ME 1,680 1,910(2) 44 n/a (2) 58 60 x 96 BYZO260096HAD _ G ME 1,760 1,980

For complete model number:1. Insert height selection : D dining height 27.75"H- see below chart for pricingB bar height 40.75"H - see below chart for pricing

Standard metal powder coat finishes (ME) Flat Black, Furniture White, Inner Tone, Light Tone, Medium Tone and Metallic Silver

* Zoey Conference can be used on other top shapes, email [email protected] for pricing.

basesZoey conference bases

basesZoey conference bases


basemax top support base description

mount plate qty model no. list

Borne48 x 48, 60 rd 2" dia column x 27.75"H, glides 4 x 4 4 BPBOR4S02RSDGME 520

n/a 2" dia column x 27.75"H, glides 4 x 4 1 BPBOR1S02RSDGME 130

Moto48 x 48, 60 rd 2" square column x 27.75"H, glides 6 x 6 4 BPMOT4S02SSDGME 72048 x 48, 60 rd 2.75" square column x 27.75"H, glides 8 x 8 4 BPMOT4S03SSDGME 830

n/a 2" square column x 27.75"H, glides 6 x 6 1 BPMOT1S02SSDGME 180n/a 2.75" square column x 27.75"H, glides 8 x 8 1 BPMOT1S03SSDGME 210

Bati n/a 3" column diameter, metal bolt mounted 6 x 9 1 BPBAT1S3ODSDBME 42030" max top depth

Post legs need to be placed every 48". Larger surfaces usually require more than four post legs.

(ME) Standard metal powder coat finishes :Black Wrinkle (BW), Chateau Brown Wrinkle (CB), Flat Black (FB), Furniture White (FW), Inner Tone (IT), Light Tone (LT), Medium Tone (MT), Metallic Silver (MS)

Post legs need to be placed every 48". Larger surfaces usually require more than four post legs.

Post legs need to be placed every 48"

base base dimension base heightmax top support mount plate qty model no. list

Canty end base 18 x 1 x 2 27.75 20 x 72 1" x 2" x 6" tabs 2 BFCAN20072SDGME 72022 x 1 x 2 27.75 24 x 72 1" x 2" x 6" tabs 2 BFCAN24072SDGME 76028 x 1 x 2 27.75 30 x 72 1" x 2" x 6" tabs 2 BFCAN30072SDGME 82034 x 1 x 2 27.75 36 x 72 1" x 2" x 6" tabs 2 BFCAN36072SDGME 86040 x 1 x 2 27.75 42 x 72 1" x 2" x 6" tabs 2 BFCAN42072SDGME 90046 x 1 x 2 27.75 48 x 72 1" x 2" x 6" tabs 2 BFCAN48072SDGME 940

(ME) Standard metal powder coat finishes :Black Wrinkle (BW), Chateau Brown Wrinkle (CB), Flat Black (FB), Furniture White (FW), Inner Tone (IT), Light Tone (LT), Medium Tone (MT), Metallic Silver (MS)

*Custom shorter or taller heights are available for Canty bases with a minimum quantity of 20 bases of the same sizeemail [email protected] for more information and pricing

basesframeCanty

basespostBorne, Moto, Bati


baseoutside base dimensions

top size with 1" overhang on

each sidebase

height model no. list glide/caster optionMoto Frame 22 x 22 24 x 24 27.75 BFMOT24024S D __ ME 1,180

Seated Height 22 x 34 24 x 36 27.75 BFMOT24036S D __ ME 1,200(27.75"H) 22 x 40 24 x 42 27.75 BFMOT24042S D __ ME 1,210

22 x 46 24 x 48 27.75 BFMOT24048S D __ ME 1,25022 x 58 24 x 60 27.75 BFMOT24060S D __ ME 1,26022 x 70 24 x 72 27.75 BFMOT24072S D __ ME 1,30028 x 28 30 x 30 27.75 BFMOT30030S D __ ME 1,20028 x 34 30 x 36 27.75 BFMOT30036S D __ ME 1,21028 x 40 30 x 42 27.75 BFMOT30042S D __ ME 1,22028 x 46 30 x 48 27.75 BFMOT30048S D __ ME 1,23028 x 58 30 x 60 27.75 BFMOT30060S D __ ME 1,28028 x 70 30 x 72 27.75 BFMOT30072S D __ ME 1,31034 x 34 36 x 36 27.75 BFMOT36036S D __ ME 1,25034 x 40 36 x 42 27.75 BFMOT36042S D __ ME 1,26034 x 46 36 x 48 27.75 BFMOT36048S D __ ME 1,27034 x 58 36 x 60 27.75 BFMOT36060S D __ ME 1,32034 x 70 36 x 72 27.75 BFMOT36072S D __ ME 1,35040 x 40 42 x 42 27.75 BFMOT42042S D __ ME 1,27040 x 46 42 x 48 27.75 BFMOT42048S D __ ME 1,28040 x 58 42 x 60 27.75 BFMOT42060S D __ ME 1,31040 x 70 42 x 72 27.75 BFMOT42072S D __ ME 1,33046 x 46 48 x 48 27.75 BFMOT48048S D __ ME 1,29046 x 58 48 x 60 27.75 BFMOT48060S D __ ME 1,34046 x 70 48 x 72 27.75 BFMOT48060S D __ ME 1,370

Moto Frame 22 x 22 24 x 24 34.75 BFMOT24024S C __ ME 1,260Counter Height 22 x 34 24 x 36 34.75 BFMOT24036S C __ ME 1,280

(34.75"H) 22 x 40 24 x 42 34.75 BFMOT24042S C __ ME 1,29022 x 46 24 x 48 34.75 BFMOT24048S C __ ME 1,34022 x 58 24 x 60 34.75 BFMOT24060S C __ ME 1,35022 x 70 24 x 72 34.75 BFMOT24072S C __ ME 1,38028 x 28 30 x 30 34.75 BFMOT30030S C __ ME 1,28028 x 34 30 x 36 34.75 BFMOT30036S C __ ME 1,29028 x 40 30 x 42 34.75 BFMOT30042S C __ ME 1,30028 x 46 30 x 48 34.75 BFMOT30048S C __ ME 1,31028 x 58 30 x 60 34.75 BFMOT30060S C __ ME 1,36028 x 70 30 x 72 34.75 BFMOT30072S C __ ME 1,39034 x 34 36 x 36 34.75 BFMOT36036S C __ ME 1,33034 x 40 36 x 42 34.75 BFMOT36042S C __ ME 1,34034 x 46 36 x 48 34.75 BFMOT36048S C __ ME 1,35034 x 58 36 x 60 34.75 BFMOT36060S C __ ME 1,40034 x 70 36 x 72 34.75 BFMOT36072S C __ ME 1,43040 x 40 42 x 42 34.75 BFMOT42042S C __ ME 1,35040 x 46 42 x 48 34.75 BFMOT42048S C __ ME 1,36040 x 58 42 x 60 34.75 BFMOT42060S C __ ME 1,39040 x 70 42 x 72 34.75 BFMOT42072S C __ ME 1,41046 x 46 48 x 48 34.75 BFMOT48048S C __ ME 1,37046 x 58 48 x 60 34.75 BFMOT48060S C __ ME 1,42046 x 70 48 x 72 34.75 BFMOT48060S C __ ME 1,450

G $0 glides

C + $220 casters (3.5"H locking)

baseoutside base dimensions

top size with 1" overhang on

each sidebase

height model no. list glide/caster optionMoto Frame 22 x 22 24 x 24 40.75 BFMOT24024S B __ ME 1,330Bar Height 22 x 34 24 x 36 40.75 BFMOT24036S B __ ME 1,350(40.75"H) 22 x 40 24 x 42 40.75 BFMOT24042S B __ ME 1,370

22 x 46 24 x 48 40.75 BFMOT24048S B __ ME 1,41022 x 58 24 x 60 40.75 BFMOT24060S B __ ME 1,43022 x 70 24 x 72 40.75 BFMOT24072S B __ ME 1,45028 x 28 30 x 30 40.75 BFMOT30030S B __ ME 1,35028 x 34 30 x 36 40.75 BFMOT30036S B __ ME 1,36028 x 40 30 x 42 40.75 BFMOT30042S B __ ME 1,37028 x 46 30 x 48 40.75 BFMOT30048S B __ ME 1,38028 x 58 30 x 60 40.75 BFMOT30060S B __ ME 1,43028 x 70 30 x 72 40.75 BFMOT30072S B __ ME 1,46034 x 34 36 x 36 40.75 BFMOT36036S B __ ME 1,40034 x 40 36 x 42 40.75 BFMOT36042S B __ ME 1,41034 x 46 36 x 48 40.75 BFMOT36048S B __ ME 1,42034 x 58 36 x 60 40.75 BFMOT36060S B __ ME 1,47034 x 70 36 x 72 40.75 BFMOT36072S B __ ME 1,50040 x 40 42 x 42 40.75 BFMOT42042S B __ ME 1,42040 x 46 42 x 48 40.75 BFMOT42048S B __ ME 1,43040 x 58 42 x 60 40.75 BFMOT42060S B __ ME 1,46040 x 70 42 x 72 40.75 BFMOT42072S B __ ME 1,48046 x 46 48 x 48 40.75 BFMOT48048S B __ ME 1,44046 x 58 48 x 60 40.75 BFMOT48060S B __ ME 1,49046 x 70 48 x 72 40.75 BFMOT48060S B __ ME 1,520

* top not included


G $0 glides

C + $220 casters (3.5"H locking)

basesframeMoto

basesframeMoto


base angle base description mount plate Qty model no.list for (1) post

baseKrauss

22 degrees 2" x 2" x 16.75"H angled column 6 x 6 1 BPKRA12022SOGME 22022 degrees 2" x 2" x 27.75"H angled column 6 x 6 1 BPKRA12022SDGME 220

22 degrees 2.75" x 2.75" x 16.75"H angled column 8 x 8 1 BPKRA13022SOGME 24022 degrees 2.75" x 2.75" x 27.75"H angled column 8 x 8 1 BPKRA13022SDGME 240

30 degrees 2.75" x 2.75" x 27.75"H angled column* 8 x 8 1 BPKRA13030SDGME 240*2.75" 30 degree angle base shall be used with 42" or 48" deep rectangle tops

* The above pricing for the Krauss series angled post base is for a single base. Due to the versatility of this base, please email [email protected] to verify how many bases you will need and quantity of bases required to support your top.

Note that the height of the base as well as the degree angle of the base will determine the top size that it will support. We encourage you to contact our support team to obtain a drawing to verify that the bases will fit under the intended top size.

(ME) Standard metal powder coat finishes :Black Wrinkle (BW), Chateau Brown Wrinkle (CB), Flat Black (FB),

basespostKrauss

basespost

Krauss


base base descriptionbase

height qty model no. listPyra

tapered angled post base with wire management in base, adj glides 27.75 4 BPPYR4STASDGME 700tapered angled post base with wire management in base, adj glides 34.75 4 BPPYR4STASDCME 790tapered angled post base with wire management in base, adj glides 40.75 4 BPPYR4STASDBME 840

reference illustrations to view the minumum and maximum top sizes for each base overall base height (27.75"H, 34.75"H, 40.75"H bases)weight capacity is 200 lbs including the top for a set of 4 bases

Note that the maximum table top diameter that 4 bases will hold is 60" round


basespostPyra


Please specify the power supply location cut out on your PO:

POWER MODULE LOCATIONS FOR UNITS RUNNING SHORT WAYS ON THE TOP:

Note that power supplies cannot be placed over metal base plates, contact [email protected] to ensure that the power supply location will work with your base placement and all of the other options / accessories specified on the table.

power/data+ wire mangement

power supply location chart


module descriptionnumber of ports model no.

finish code list

cord length option

Adassa in surface single-sided unit(anodized aluminum finish)

2 power, 1 USB-A 3 OPPADA2P1A0D __ SW 5104"D x 6.5"W table top cut out, specify location 3 OPPADA2P1A0D __ SB 510

3 OPPADA2P1A0D __ BB 660

Ariba 2 port in surface single-sided unit(high gloss plastic finish)

2 power3"D x 4.5"W table top cut out, specify location 2 OPPADA2P0A0D __ GW 280cut out shall have 1/4" radius corners 2 OPPADA2P0A0D __ GB 280

1 power, 1 dual charging USB-A3"D x 4.5"W table top cut out, specify location 2 OPPADA1P1A0D __ GW 370cut out shall have 1/4" radius corners 2 OPPADA1P1A0D __ GB 370

1 power, 1 single USB-C3"D x 4.5"W table top cut out, specify location 2 OPPADA1P1C18 __ GW 370cut out shall have 1/4" radius corners 2 OPPADA1P1C18 __ GB 370

1 power, 1 single USB-A, 1 single USB-C3"D x 4.5"W table top cut out, specify location 2 OPPADA1PAC0D __ GW 440cut out shall have 1/4" radius corners 2 OPPADA1PAC0D __ GB 440

06 -+ $06 ft. cord

10 -+ $20 list10 ft. cord

For complete model number:1. Insert cord length selection : 06 = 6 ft. cord length - $010 = 10 ft. cord length - $20 list

ARIBA SERIES FINISH CODE LEGEND:

GW - Gloss white case finish, white trim finish, white simplex finish, white cord

GB - Gloss black case finish, black trim finish, black simplex finish, black cord

Ariba 2 port in surface cut out information:

ADASSA SERIES FINISH CODE LEGEND:

SW - Silver anodized aluminum case finish, white trim finish, white simplex finish, white cord

SB - Silver anodized aluminum case finish, black trim finish, black simplex finish, black cord

BB - Black anodized aluminum case finish, black trim finish, black simplex finish, black cord

Adassa 3 port in surface cut out information:

** Adassa and Ariba modules have many different configurations available within the family offering, including hardwired solutions,email [email protected] for assistance if you are looking for additional power/data/USB features for your project.


finish code list

cord length option

Ariba 4 port in surface single-sided unit(high gloss plastic finish)

2 power, 2 open data3"D x 6-15/16"W table top cut out, specify 4 OPPARI2P0A2D __ GW 320cut out shall have 3/8" radius corners 4 OPPARI2P0A2D __ GB 320

2 power, 1 USB-A, 1 open data3"D x 6-15/16"W table top cut out, specify 4 OPPARI2P1A1D __ GW 420cut out shall have 3/8" radius corners 4 OPPARI2P1A1D __ GB 420

2 power, 2 USB-A3"D x 6-15/16"W table top cut out, specify 4 OPPARI2P2A0D __ GW 520cut out shall have 3/8" radius corners 4 OPPARI2P2A0D __ GB 520

2 power, 1 USB-A, 1 USB-C3"D x 6-15/16"W table top cut out, specify 4 OPPARI2P1A1C __ GW 590cut out shall have 3/8" radius corners 4 OPPARI2P1A1C __ GB 590

3 power, 1 open data3"D x 6-15/16"W table top cut out, specify 4 OPPARI3P0A1D __ GW 340cut out shall have 3/8" radius corners 4 OPPARI3P0A1D __ GB 340

3 power, 1 USB-A3"D x 6-15/16"W table top cut out, specify 4 OPPARI3P1A0D __ GW 440cut out shall have 3/8" radius corners 4 OPPARI3P1A0D __ GB 440

06 -+ $06 ft. cord


For complete model number:1. Insert cord length selection : 06 = 6 ft. cord length - $010 = 10 ft. cord length - + $20 list

ARIBA SERIES FINISH CODE LEGEND:



Ariba 4 port in surface cut out information:

** Adassa & Ariba modules have many different configurations available within the family offering, including hardwired solutions, email [email protected] for assistance if you are looking for additional power/data/USB features for your project.

power/data modulesAriba in surface

power/data modulesAdassa and Ariba in surface


module descriptiongrommet

finishmodule finish model no. list

Asti in surface

2 power, 1 convenience outlet below the worksurface, 108 inch cord silver silver OPPAST2P0UDR91SB 3602 open data ports for RJ45 Cat 6 data (data jacks not included) black black OPPAST2P0UDR91BB 360

white silver OPPAST2P0UDR91WW 360

3"D x 5.25"W table top cut out size - specify placementbrushed

aluminum black OPPAST2P0UDR91AB 430stainless steel black OPPAST2P0UDR91ST 430

2 power, 1 dual charging USB-A, 1 convenience outlet below the worksurface, 108 inch cord silver silver OPPAST2P1UDR91SB 5102 open data ports for RJ45 Cat 6 data (data jacks not included) black black OPPAST2P1UDR91BB 510

white silver OPPAST2P1UDR91WW 510


aluminum black OPPAST2P1UDR91AB 580stainless steel black OPPAST2P1UDR91ST 580

Asti II in surface2 power at the surface, 3 convenience outlets below the worksurface silver silver OPPAS22P0UDR93SB 430108 inch cord black black OPPAS22P0UDR93BB 4302 open data ports for RJ45 Cat 6 data (data jacks not included) white white OPPAS22P0UDR93WW 430


aluminum black OPPAS22P0UDR93AB 500stainless steel black OPPAS22P0UDR93ST 500

2 power at the surface, 1 dual charging USB-A silver silver OPPAS22P1UDR93SB 5903 convenience outlets below the worksurface, 108 inch cord black black OPPAS22P1UDR93BB 5901 open data port for an RJ45 Cat 6 data (data jack not included) white white OPPAS22P1UDR93WW 590


aluminum black OPPAS22P1UDR93AB 660stainless steel black OPPAS22P1UDR93ST 660

** You can daisy chain up to (4) Asti units with a 20 amp single circuit outlet

Asti undermount

2 power, 1 convenience outlet under surface mount power unit, 108" cord silver OPPASU3P0U0D9BB 280no cut out required black OPPASU3P0U0D9SB 280

** You can daisy chain up to (4) Asti undermount units with a 20 amp single circuit outlet

** Asti has many different configurations available within the family offering, including a hardwired solution, [email protected] for assistance if you are looking for additional power/data/USB features for your project.

power/data modulesAsti and Asti II in surfaceAsti undermount



finish code list

cord length option

Aya in surface1 power, 1 charging USB-A, 1 bluetooth speaker 4 OPPAYA1P1A1S _ SB 7902"D x 6.75"W table top cut out, specify location 4 OPPAYA1P1A1S _ BB 790

4 OPPAYA1P1A1S _ GW 7904 OPPAYA1P1A1S _ GB 870

2 power, 1 dual charging USB-A, 1 USB-C 18w 4 OPPAYA2P1A1C _ SB 6002"D x 6.75"W table top cut out, specify location 4 OPPAYA2P1A1C _ BB 600

4 OPPAYA2P1A1C _ GW 6204 OPPAYA2P1A1C _ GB 690

1 power, 1 dual charging USB-A, 1 USB-C 60w 4 OPPAYA1P1AC6 _ SB 7102"D x 6.75"W table top cut out, specify location 4 OPPAYA1P1AC6 _ BB 710

4 OPPAYA1P1AC6 _ GW 7104 OPPAYA1P1AC6 _ GB 790

2 power, 1 dual charging USB-A, 1 open data 4 OPPAYA2P1A1D _ SB 4302"D x 6.75"W table top cut out, specify location 4 OPPAYA2P1A1D _ BB 430

4 OPPAYA2P1A1D _ GW 4304 OPPAYA2P1A1D _ GB 520

2 power, 2 open data 4 OPPAYA2P0A2D _ SB 3302"D x 6.75"W table top cut out, specify location 4 OPPAYA2P0A2D _ BB 330


3 power, 3 open data 6 OPPAYA3P0A3D _ SB 4102"D x 9.75"W table top cut out, specify location 6 OPPAYA3P0A3D _ BB 410


06 -+ $06 ft. cord



Aya in surface cut out information:# of ports. "X" Dim.

4 6.75"W

6 9.75"W

AYA SERIES FINISH CODE LEGEND:





** Aya modules have many different configurations available within the family offering, including hardwired solutions, [email protected] for assistance if you are looking for additional power/data/USB features for your project.


finish code list

cord length option

Aya F (freestanding)2 OPPAYF1P1A0D _ SB 410

1 power, 1 dual charging USB-A 2 OPPAYF1P1A0D _ BB 4102 OPPAYF1P1A0D _ GW 4102 OPPAYF1P1A0D _ GB 4903 OPPAYF2P1A0D _ SB 430

2 power, 1 dual charging USB-A 3 OPPAYF2P1A0D _ BB 4303 OPPAYF2P1A0D _ GW 4303 OPPAYF2P1A0D _ GB 5103 OPPAYF1P1A1C _ SB 590

1 power, 1 dual charging USB-A, 1 USB-C 18w 3 OPPAYF1P1A1C _ BB 5903 OPPAYF1P1A1C _ GW 5903 OPPAYF1P1A1C _ GB 6904 OPPAYF2P2A0D _ SB 530

2 power, 2 dual charging USB-A 4 OPPAYF2P2A0D _ BB 5304 OPPAYF2P2A0D _ GW 5304 OPPAYF2P2A0D _ GB 6204 OPPAYF2P1A1C _ SB 600

2 power, 1 dual charging USB-A, 1 USB-C 18w 4 OPPAYF2P1A1C _ BB 6004 OPPAYF2P1A1C _ GW 6004 OPPAYF2P1A1C _ GB 690

Aya H (horizontal clamp mount)1 power, 1 charging USB-A, 1 bluetooth speaker 4 OPPAYH1P1A1S _ SB 790

4 OPPAYH1P1A1S _ BB 7904 OPPAYH1P1A1S _ GW 7904 OPPAYH1P1A1S _ GB 810

2 power, 1 dual USB-A, 1 USB-C 18w 4 OPPAYH2P1A1C _ SB 6004 OPPAYH2P1A1C _ BB 6004 OPPAYH2P1A1C _ GW 6004 OPPAYH2P1A1C _ GB 690

1 power, 1 dual USB-A, 1 USB-C 60w 4 OPPAYH1P1AC6 _ SB 7104 OPPAYH1P1AC6 _ BB 7104 OPPAYH1P1AC6 _ GW 7104 OPPAYH1P1AC6 _ GB 790

Aya V (vertical clamp mount)

2 power, 1 dual USB-A, 1 open data 4 OPPAYV2P1A1D __ SB 4304 OPPAYV2P1A1D __ BB 4304 OPPAYV2P1A1D __ GW 4304 OPPAYV2P1A1D __ GB 520

06 -+ $06 ft. cord



** Aya modules have many different configurations available within the family offering, including hardwired solutions, [email protected] for assistance if you are looking for additional power/data/USB features for your project.

power/data modulesAya

freestanding and clamp mount

power/data modulesAya in surface



fnish code list

cord length option

Beni in surface single-sided unit

2 power 2 OPPBEN2P0A0D__ SS 440

4"D x 5"W table top cut out, specify location 2 OPPBEN2P0A0D _ SW 4402 OPPBEN2P0A0D _ SB 4402 OPPBEN2P0A0D _ BB 550

2 power, 1 dual charging USB-A 3 OPPBEN2P1A0D _ SS 5504"D x 6.5"W table top cut out, specify location 3 OPPBEN2P1A0D _ SW 550

3 OPPBEN2P1A0D _ SB 5503 OPPBEN2P1A0D _ BB 670

2 power, 1 dual charging USB-A, 1 USB-C 4 OPPBEN2P1A1C _ SS 7204"D x 8"W table top cut out, specify location 4 OPPBEN2P1A1C _ SW 720

4 OPPBEN2P1A1C _ SB 7204 OPPBEN2P1A1C _ BB 840

2 power, 1 dual charging USB-A, 1 open data 4 OPPBEN2P1A1D _ SS 5504"D x 8"W table top cut out, specify location 4 OPPBEN2P1A1D _ SW 550


2 power, 2 open data ports 4 OPPBEN2P0A2D _ SS 4504"D x 8"W table top cut out, specify location 4 OPPBEN2P0A2D _ SW 450


2 power, 1 dual charging USB-A, 3 open data 6 OPPBEN2P1A3D _ SS 6004"D x 11"W table top cut out, specify location 6 OPPBEN2P1A3D _ SW 600


3 power, 3 open data ports 6 OPPBEN3P0A3D _ SS 4904"D x 11"W table top cut out, specify location 6 OPPBEN3P0A3D _ SW 490


5"6.5"8"11"

** Beni has many different configurations available within the family offering, including a hardwired solution, shared media solutions and upgraded equipment that will allow the units to daisy chain (for an upcharge), [email protected] for assistance if you are looking for additional power/data/USB features for your project.

06 -+ $06 ft. cord



BENI SERIES FINISH CODE LEGEND:

SS - Silver anodized aluminum case finish, silver trim finish, black simplex finish, black cord




Beni cut out information:

# of ports. "X" Dim.

2346


finish code list

cord length option

Beni in surface back-to-back unit

Each side contains: 8 OPPBEB4P4A0D __ SS 13302 power, 2 dual charging USB-A, cord (4 / side) OPPBEB4P4A0D __ SW 1330*there are 2 cords standard per unit OPPBEB4P4A0D __ SB 1330total of 4 power, 4 dual charging USB-A's per unit OPPBEB4P4A0D __ BB 15807-11/16"D x 8"W table top cut out, specify locationEach side contains: 8 OPPBEB4P0A4D __ SS 9202 power, 2 open data ports, cord (4 / side) OPPBEB4P0A4D __ SW 920*there are 2 cords standard per unit OPPBEB4P0A4D __ SB 920total of 4 power, 4 open data ports per unit OPPBEB4P0A4D __ BB 11707-11/16"D x 8"W table top cut out, specify location

Beni in surface side-by-side unit

Each side contains: 8 OPPBES4P0A4D __ SS 9802 power, 2 open data ports, cord (4 / side) OPPBES4P0A4D __ SW 980*there are 2 cords standard per unit OPPBES4P0A4D __ SB 980total of 4 power, 4 open data ports per unit OPPBES4P0A4D __ BB 12504"D x 16-3/16"W table top cut out, specify locationEach side contains: 12 OPPBES6P0A6D __ SS 10803 power, 3 open data ports, cord (6 / side) OPPBES6P0A6D __ SW 1080*there are 2 cords standard per unit OPPBES6P0A6D __ SB 1080total of 6 power, 6 open data ports per unit OPPBES6P0A6D __ BB 13804"D x 22-3/16"W table top cut out, specify location


BENI SERIES FINISH CODE LEGEND:





Beni Back-To-Back cut out information:# of ports. "X" Dim.

8 8"(4 ports / side)

Beni Side-By-Side cut out information:# of ports. "X" Dim.

8 16-3/16"W(4 ports / side)

12 22-3/16"W(6 ports / side)

06 -+ $06 ft. cord


*there are 2 cords standard for each unit. Single circuit breaker cord units are available.

*Beni back-to-back and side-to-side units are also available with a single circuit breaker cord instead of 2 cords per unit, please email [email protected] for pricing.

power/data modulesBeni in surface

back -to-back and side-to-side

power/data modulesBeni in surfacesingle-sided unit



finish code list

cord length option

Circo in surface2 power 2 OPPCIR2P0A0D _ PW 2403" diameter cut out, specify location 2 OPPCIR2P0A0D _ MB 240

2 OPPCIR2P0A0D _ SN 330

1 power, 1 dual charging USB-A 2 OPPCIR1P1A0D _ PW 3303" diameter cut out, specify location 2 OPPCIR1P1A0D _ MB 330


1 power, 1 USB-C 18w 2 OPPCIR1P1C18 _ PW 4003" diameter cut out, specify location 2 OPPCIR1P1C18 _ MB 400

2 OPPCIR1P1C18 _ SN 490

1 power, 1 USB-A, 1 USB-C 2 OPPCIR1PAC0D _ PW 3303" diameter cut out, specify location 2 OPPCIR1PAC0D _ MB 330

2 OPPCIR1PAC0D _ SN 430

1 power, 1 open data 2 OPPCIR1P0A1D _ PW 2303" diameter cut out, specify location 2 OPPCIR1P0A1D _ MB 230


Cova Shared Media 4 power, 2 dual charging USB-A, N/A OPPCOV4P4H2U 9 BB 9,8104 HDMI Show Me cables, HDMI 4 OPPCOV4P4H2U 9 SS 9,810position switch box, 15' HDMI monitor cable, 108" cord. OPPCOV4P4H2U 9 WW 9,810Carry case included.Ideal for a portable shared media solution with easy set upadditional adapter accessories availableemail [email protected] for assistance.

06 -+ $06 ft. cord



CIRCO SERIES FINISH CODE LEGEND:

PW - Parchment White powdercoat finish, white trim, white simplex finish, white cord

MB - Midnight Black powdercoat finish, black trim finish, black simplex finish, black cord

SN - Satin Nickel Plated finish, black trim finish, black simplex finish, black cord

Circo in surface cut out information:

COVA SERIES FINISH CODE LEGEND:

BB - black

SS - silver

WW - white


finish code list

cord length option

Doca Freestanding2 power, 1 dual charging USB-A, one blank 4 OPPDOC2P1A1B __ BB 390no cut out required 4 OPPDOC2P1A1B __ WW 390

Doca in surface3 power, 1 dual charging USB-A 4 OPPDOC3P1A0D __ BB 4003" diameter cut out, specify location 4 OPPDOC3P1A0D __ WW 400

2 power, 2 dual charging USB-A 4 OPPDOC2P2A0D __ BB 4903" diameter cut out, specify location 4 OPPDOC2P2A0D __ WW 490

2 power, 1 dual charging USB-A, 1 USB-C 18w 4 OPPDOC2P1A1C __ BB 5703" diameter cut out, specify location 4 OPPDOC2P1A1C __ WW 570

2 power, 1 dual charging USB-A, 1 open data 4 OPPDOC2P1A1D __ BB 3903" diameter cut out, specify location 4 OPPDOC2P1A1D __ WW 390

2 power, 2 open data 4 OPPDOC2P0A2D __ BB 3003" diameter cut out, specify location 4 OPPDOC2P0A2D __ WW 300

3 power, 1 open data 4 OPPDOC3P0A1D __ BB 3003" diameter cut out, specify location 4 OPPDOC3P0A1D __ WW 300

4 power** 4 OPPDOC4P0A0D __ BB 3503" diameter cut out, specify location 4 OPPDOC4P0A0D __ WW 350

** CIRCUIT BREAKER PLUG

Units with 4 or more power and 1 cord will have a circuit breaker cord, please verify thatthe larger plug will work with your wire management options, email [email protected] for assistance.

06 -+ $06 ft. cord



DOCA SERIES FINISH CODE LEGEND:

WW - Gloss white case finish, white trim finish, white simplex finish, molded white custom insert, white cord

BB - Gloss black case finish, black trim finish, black simplex finish, molded black custom insert, black cord

Doca in surface cut out information:

** Doca modules have many different configurations available within the family offering, including hardwired solutions, email [email protected] for assistance if you are looking for additional power/data/USB features for your project.

power/data modulesCirco in surfaceCova Shared Media freestanding

power/data modulesDoca

freestanding and in surface



finish code list

cord length option

Due in surface2 power, 2 dual charging USB-A 4 OPPDUE2P2A0D __ SB 2,0005.92"D x 6.52" long cut out required, specify location 4 OPPDUE2P2A0D __ SW 2,000

2 power, 1 dual charging USB-A, 1 USB-C 18w 4 OPPDOC2P1A1C __ SB 2,0705.92"D x 6.52" long cut out required, specify location 4 OPPDOC2P1A1C __ SW 2,070

4 power** 4 OPPDOC4P0A0D __ SB 1,8305.92"D x 6.52" long cut out required, specify location 4 OPPDOC4P0A0D __ SW 1,830



***Due has a multi-directional hinge that will open the lid to both sides of the worksurface so users can access the power from both sides of the table

Felino in surface3 power 3 OPPFEL3P0A0D __ WW 3204.5" diameter cut out required, specify location 3 OPPFEL3P0A0D __ BB 320

2 power, 1 dual charging USB-A 3 OPPFEL2P1A0D __ WW 4104.5" diameter cut out required, specify location 3 OPPFEL2P1A0D __ BB 410

06 -+ $06 ft. cord



DUE SERIES FINISH CODE LEGEND:

SB - silver anodized aluminum with black plastic

SW - silver anodized aluminum with white plastic

Felino SERIES FINISH CODE LEGEND:

WW - Soft touch white plastic finish

BB - soft touch black plastic finish

Felino in surface cut out information:

06 -+ $06 ft. cord



finish code list

cord length option

Fola edge mount with clamp(no faceplate)

2 power 2 OPPFOL2P0A0D __ SW 3302 OPPFOL2P0A0D __ SB 3302 OPPFOL2P0A0D __ SS 3302 OPPFOL2P0A0D __ BB 420

1 power, 1 dual USB-A 2 OPPFOL1P1A0D __ SW 4202 OPPFOL1P1A0D __ SB 4202 OPPFOL1P1A0D __ SS 4202 OPPFOL1P1A0D __ BB 530

2 power, 1 dual USB-A, 1 open data port 4 OPPFOL2P1A1D __ SW 4404 OPPFOL2P1A1D __ SB 4404 OPPFOL2P1A1D __ SS 4404 OPPFOL2P1A1D __ BB 540

4 power** 4 OPPFOL4P0A0D __ SW 4504 OPPFOL4P0A0D __ SB 4504 OPPFOL4P0A0D __ SS 4504 OPPFOL4P0A0D __ BB 580



***Due has a multi-directional hinge that will open the lid to both sides of the worksurface so users can access the power from both sides of the table

Fyx Freestanding 6 power, 48" long unit, 72" long cord 6 OPPFYX6P0A0D06 SW 630

6 power, 48" long unit, 72" long cord 6 OPPFYX6P0A0D06 SB 630

6 power, 48" long unit, 72" long cord 6 OPPFYX6P0A0D06 BB 800

06 -+ $06 ft. cord



FOLA SERIES FINISH CODE LEGEND:





power/data modulesDue and Felinoin surface

power/data modulesFola edge mountFyx freestanding



finish code list

cord length option

Kita single-sided unit

2 power, 1 USB-A, 1 USB-C 4 OPPKIT2P1A1C __ SW 7905"D x 8"W table top cut out, specify location 4 OPPKIT2P1A1C __ SB 790

4 OPPKIT2P1A1C __ BB 930

2 power, 1 USB-A, 1 open data port 4 OPPKIT2P1A1D __ SW 6205"D x 8"W table top cut out, specify location 4 OPPKIT2P1A1D __ SB 620

4 OPPKIT2P1A1D __ BB 760

2 power, 1 USB-A, 1 HDMI 4 OPPKIT2P1A1H __ SW 7005"D x 8"W table top cut out, specify location 4 OPPKIT2P1A1H __ SB 700

4 OPPKIT2P1A1H __ BB 840

2 power, 2 open data ports 4 OPPKIT2P0A2D __ SW 5205"D x 8"W table top cut out, specify location 4 OPPKIT2P0A2D __ SB 530


2 power, 1 open data port, 1 HDMI 4 OPPKIT2P1D1H __ SW 6005"D x 8"W table top cut out, specify location 4 OPPKIT2P1D1H __ SB 600

4 OPPKIT2P1D1H __ BB 740

3 power, 3 open data ports 6 OPPKIT3P0A3D __ SW 5505"D x 11"W table top cut out, specify location 6 OPPKIT3P0A3D __ SB 550


** Kita has many different configurations available within the family offering, including a hardwired solution, shared media solutions and upgraded equipment that will allow the units to daisy chain (for an upcharge), [email protected] for assistance if you are looking for additional power/data/USB features for your project.

06 -+ $06 ft. cord



KITA SERIES (ANODIZED ALUMINUM) FINISH CODE LEGEND:




For complete model number:1. Insert cord length selection : 0610

Kita SINGLE SIDED cut out information:


4 8"W

6 11"W


finish code list

cord length option

Kita back-to-back unitEach side contains: 8 OPPKIB4P0A4D __ SB 8902 power, 2 open data ports (4/side)*there are 2 cords standard per unitTotal of 4 power, 4 open data ports per unit9-13/16"D x 8"W table top cut out

Each side contains: 8 OPPKIB4P2A2D __ SB 1,0702 power, 1 dual charging USB, 1 open data port (4/side)*there are 2 cords standard per unitTotal of 4 power, 2 dual USB-A, 2 open data ports per unit9-13/16"D x 8"W table top cut out

Side 1 contains: 2 power, 1 dual charging USB, 1 open data port 8 OPPKIB4P2A1D1H __ SB 1,430Side 2 contains: 2 power, 1 dual charging USB, 1 HDMI (4/side)*there are 2 cords standard per unitTotal of 4 power, 2 dual USB-A, 1 open data, 1 HDMI per unit9-13/16"D x 8"W table top cut out

Each side contains: 12 OPPKIB6P0A6D __ SB 9903 power, 3 open data ports (6/side)*there are 2 cords standard per unitTotal of 6 power, 6 open data ports per unit9-13/16"D x 11"W table top cut out

Each side contains: 12 OPPKIB6P2A4D __ SB 1,1903 power, 1 dual charging USB, 2 open data ports (6/side)*there are 2 cords standard per unitTotal of 6 power, 2 dual USB-A, 4 open data ports per unit9-13/16"D x 11"W table top cut out

Side 1 contains: 3 power, 1 dual USB-A, 2 open data ports 12 OPPKIB6P2A1D1H __ SB 1,450Side 2 contains: 3 power, 1 dual USB-A, 1 HDMI, 1 open data (6/side)*there are 2 cords standard per unitTotal of 6 power, 2 dual USB-A, 1 HDMI, 3 open data per unit9-13/16"D x 11"W table top cut out

06 -+ $06 ft. cord


*there are 2 cords standard for each unit. Single circuit breaker cord units are available.


KITA BACK TO BACK SERIES (ANODIZED ALUMINUM) FINISH CODE LEGEND:


Kita Back-To-Back cut out information:


8 8"W(4 ports / side)

12 11"W

*Kita back-to-back and side-to-side units are also available with a single circuit breaker cord instead of 2 cords per unit, please email [email protected] for pricing.

power/data modulesKita in surfacesingle-sided unit

power/data modulesKita in surface

back-to-back unit



finish code list

cord length option

Kita II in surface single-sided unit(matte powder coat finishes)

3 power, 1 dual charging USB-A 4 OPPKI23P1A0D __MW 5304-7/8" x 7-7/8" table top cut out, specify location 4 OPPKI23P1A0D __MB 530

2 power, 2 dual charging USB-A 4 OPPKI22P2A0D __MW 6304-7/8" x 7-7/8" table top cut out, specify 4 OPPKI22P2A0D __MB 630

Kita II + WIRELESS in surface single-sided unit(matte powder coat finishes)

3 power, 1 dual charging USB-A, 3 Qi coils 6 OPPKIW3P1A3Q __MW 9304-7/8" x 10-7/8" table top cut out, specify 6 OPPKIW3P1A3Q __MB 1,060Note that the wireless unit required a total of 6 ports

2 power, 2 dual charging USB-A, 3 Qi coils 6 OPPKIW2P2A3Q __MW 1,0304-7/8" x 10-7/8" table top cut out, specify 6 OPPKIW2P2A3Q __MB 1,140Note that the wireless unit required a total of 6 ports

06 -+ $06 ft. cord



06 -+ $06 ft. cord


* THE KITA II + WIRELESS UNIT IS CONSIDERED TO HAVE 6 PORTS - the cut out size reflects 6 ports

Kita II + WIRELESS cut out information:

# of ports. "LENGTH" Dim.

6 10-7/8"W

Kita II cut out information:# of ports. "X" Dim.

4 7-7/8"W

KITA II SERIES FINISH CODE LEGEND:

MW - Matte white powder coat finish, white cord

MB - Matte Black powder coat finish, black cord

KITA II + WIRELESS SERIES FINISH CODE LEGEND:




finish code list

cord length option

Kita II DEEP in surface single-sided unit(matte powder coat finishes)

3 power, 1 dual charging USB-A 4 OPPKID3P1A0D __ MW 6304-7/8" x 7-7/8" table top cut out, specify location 4 OPPKID3P1A0D __ MB 630

3 power, 1 single USB-A, 1 single USB-C 4 OPPKID3PAC0D __ MW 6304-7/8" x 7-7/8" table top cut out, specify location 4 OPPKID3PAC0D __ MB 630

4 power, 2 dual charging USB-A* 6 OPPKID4P2A0D __ MW 7704-7/8" x 10-7/8" table top cut out, specify location 6 OPPKID4P2A0D __ MB 770** CIRCUIT BREAKER PLUG

Macht Under Surface Mount6 power, black finish, 72" circuit breaker 6 OPPMAC6P0A0D06 BK 250slide mount

4 power, 2 open data, black finish, 6 OPPMAC4P0A2D06 BK 23072" circuit breaker cord, slide mount

KITA II DEEP SERIES FINISH CODE LEGEND:



06 -+ $06 ft. cord



Kita II DEEP cut out information:# of ports. "X" Dim.

4 7-7/8"W

6. 10-7/8"W

power/data modulesKita II and Kita II+WIRELESS in surfacesingle-sided unit

power/data modulesKita II DEEP in surface single-sided unit

Macht Under Surface Mount



finish code list

cord length option

Mimi Portable 3 power, 3 dual charging USB-A, 108" cord n/a OPPMIM3P3U 9 BB 900 9 ftOPPMIM3P3U 9 SS 900 9 ftOPPMIM3P3U 9 WW 900 9 ft

Mio in surface single-sided unit2 power 2 OPPMIO2P0A0C __ GW 3604"D x 5"W table top cut out, specify location 2 OPPMIO2P0A0C __ GB 360

2 OPPMIO2P0A0C __ SB 3602 OPPMIO2P0A0C __ SW 360

1 power, 1 dual charging USB-A 2 OPPMIO1P1A0C __ GW 4504"D x 5"W table top cut out, specify location 2 OPPMIO1P1A0C __ GB 450


3 power 3 OPPMIO3P0A0C __ GW 3704"D x 6.5"W table top cut out, specify location 3 OPPMIO3P0A0C __ GB 370


2 power, 1 dual charging USB-A 3 OPPMIO2P1A0C __ GW 4704"D x 6.5"W table top cut out, specify location 3 OPPMIO2P1A0C __ GB 470


3 power, 2 dual charging USB-A 5 OPPMIO3P2A0C __ GW 5904"D x 9.5"W table top cut out, specify location 5 OPPMIO3P2A0C __ GB 590


5"6.5"9.5"


06 -+ $06 ft. cord


MIMI SERIES FINISH CODE LEGEND:

BB - black

SS - silver

WW - white

MIO SERIES FINISH CODE LEGEND:

GW - Gloss white powdercoat finish, white trim finish, white simplex finish, white cord

GB - Gloss black powdercoat finish, black trim finish, black simplex finish, black cord

SB - Silver powdercoat finish, black trim finish, black simplex finish, black cord

SW - Silver powdercoat finish, white trim finish, white simplex finish, white cord

Mio single-sided cut out information:

# of ports. "X" Dim

235


finish code list

cord length option

Mio in surface back-to backEach side contains: 8 OPPMIB4P4A0C __ GW 11202 power, 2 dual charging USB-A (4 / side) OPPMIB4P4A0C __ GB 1120*there are 2 cords standard per unit OPPMIB4P4A0C __ SB 1120total of 4 power, 4 dual charging USB-A per unit OPPMIB4P4A0C __ SW 1120

Each side contains: 8 OPPMIB4P2A2C __ GW 12402 power, 1 dual charging USB-A, 1 USB-C 18w (4 / side) OPPMIB4P2A2C __ GB 1240*there are 2 cords standard per unit OPPMIB4P2A2C __ SB 1240total of 4 power, 2 dual charging USB-A, OPPMIB4P2A2C __ SW 12402 USB-C 18w per unit

06 -+ $06 ft. cord



MIO SERIES FINISH CODE LEGEND:

GW - Gloss white powdercoat finish, white trim finish, white simplex finish, white cord

GB - Gloss black powdercoat finish, black trim finish, black simplex finish, black cord

SB - Silver powdercoat finish, black trim finish, black simplex finish, black cord

SW - Silver powdercoat finish, white trim finish, white simplex finish, white cord

Mio Back-To-Back cut out information:# of ports. "X" Dim.

8 8"(4 ports / side)

** Mio modules have many different configurations available within the family offering, including hardwired solutions, [email protected] for assistance if you are looking for additional power/data/USB features for your project.

power/data modulesMimi portable freestandingMio in surface single-sided

power/data modulesMio

in surface back-to-back



finish code list

cord length option

Neto edge mountwith clamp

2 power 2 OPPNET2P0A0C __ BB 3102 OPPNET2P0A0C __ WW 310

1 power, 1 dual charging USB-A 2 OPPNET1P1A0C __ BB 4002 OPPNET1P1A0C __ WW 400

3 power 3 OPPNET3P0A0C __ BB 3203 OPPNET3P0A0C __ WW 320

2 power, 1 dual USB-A 3 OPPNET2P1A0C __ BB 4203 OPPNET2P1A0C __ WW 420

2 power, 1 USB-A, 1 USB-C 3 OPPNET2PAC0D __ BB 4203 OPPNET2PAC0D __ WW 420

3 power, 2 dual charging USB-A 5 OPPNET3P2A0C __ BB 5405 OPPNET3P2A0C __ WW 540

Neto in surface2 power 2 OPPNET2P0A0C __ BB 3101-15/16"D x 4-7/8"W cut out, specify location 2 OPPNET2P0A0C __ WW 310

1 power, 1 dual charging USB-A 2 OPPNET1P1A0C __ BB 4001-15/16"D x 4-7/8"W cut out, specify location 2 OPPNET1P1A0C __ WW 400

3 power 3 OPPNET3P0A0C __ BB 3201-15/16"D x 6-5/16"W cut out, specify location 3 OPPNET3P0A0C __ WW 320

2 power, 1 dual USB-A 3 OPPNET2P1A0C __ BB 4201-15/16"D x 6-5/16"W cut out, specify location 3 OPPNET2P1A0C __ WW 420

2 power, 1 USB-A, 1 USB-C 3 OPPNET2PAC0D __ BB 4201-15/16"D x 6-5/16"W cut out, specify location 3 OPPNET2PAC0D __ WW 420

3 power, 2 dual charging USB-A 5 OPPNET3P2A0C __ BB 5401-15/16"D x 9-15/16"W cut out, specify location 5 OPPNET3P2A0C __ WW 540


06 -+ $06 ft. cord


Neto in surface cut out information:


2 4-7/8"

3 6-5/16"

5 9-15/16"

NETO IN SURFACE SERIES FINISH CODE LEGEND:

BB - Black smooth plastic faceplate, black powder-coated steel trimwith clear anodized aluminum housing (housing not visible from worksurface)

WW - White smooth plastic faceplate, white powder-coated steel trimwith clear anodized aluminum housing (housing not visible from worksurface)

NETO EDGE MOUNT WITH CLAMP SERIES FINISH CODE LEGEND:

BB - Black smooth plastic faceplate with clear anodized aluminum housing

WW - White smooth plastic faceplate, with clear anodized aluminum housing

module description model no.fnish code list

cord length option

Ocho above surface clamp mounted

2 power, 1 dual charging USB-A OPPOCA2P1U __ B 400OPPOCA2P1U __ S 400OPPOCA2P1U __ W 400

3 power 1 dual charging USB-A, 1 HDMI OPPOCA3PUH __ B 460OPPOCA3PUH __ S 460OPPOCA3PUH __ W 460

Ocho flush in surface 2 power 1 dual charging USB-A OPPOCF2P1U __ B 3902.19" x 6" table top cut out, specify location OPPOCF2P1U __ S 390

OPPOCF2P1U __ W 390

3 power 1 dual charging USB-A, 1 HDMI OPPOCF3PUH __ B 4502.19"D x 8.5"W table top cut out, specify location OPPOCF3PUH __ S 450

OPPOCF3PUH __ W 450

Ocho in surface pop-up2 power 1 dual charging USB-A OPPOCH2P1U __ B 4604.56"D x 6.68"W table top cut out, specify location OPPOCH2P1U __ S 460

OPPOCH2P1U __ W 460

Ocho under surface mount2 power 1 dual charging USB-A OPPOCU2P1U __ B 360

OPPOCU2P1U __ S 360OPPOCU2P1U __ W 360

3 power 1 dual charging USB-A, 1 HDMI OPPOCU3PHU __ B 460OPPOCU3PHU __ S 460OPPOCU3PHU __ W 460

06 -+ $06 ft. cord


OCHO SERIES FINISH CODE LEGEND:

B - Black plastic face, black metal trim, black cord

S - White plastic face, silver metal trim, white cord

W - White plastic face, white metal trim, white cord


power/data modulesNetoedge mount with clamp and in surface

power/data modulesOcho

above surface clamp mount, in surface flush, in surface pop up , under surface


module description Model Nofinish code List

Ovi with convenience outlet(s)2 power, 1 convenience outlet below the worksurface, 108 inch cord OPPOVI2P0U91 SB 3602"D x 5.25"W table top cut out size - specify placement OPPOVI2P0U91 BB 360

OPPOVI2P0U91 GW 360** You can daisy chain up to (4) Ovi units with a 20 amp single circuit outlet OPPOVI2P0U91 AB 440

2 power, 1 dual charging USB-A, 2 convenience outlets below the worksurface, OPPOVI2P1U92 SB 6302"D x 7.25"W table top cut out size - specify placement OPPOVI2P1U92 BB 630


3 power, 1 dual charging USB-A, 1 convenience outlet below the worksurface, 108" OPPOVI3P1U91 SB 6002"D x 7.25"W table top cut out size - specify placement OPPOVI3P1U91 BB 600


Ovi power(no convenience outlet)

2 power, 108 inch cord OPPOVI2P0U9 SB 3402"D x 4.5"W table top cut out size - specify placement OPPOVI2P0U9 BB 340

OPPOVI2P0U9 GW 340OPPOVI2P0U9 AB 410

1 power, 1 dual charging USB-A, 108 inch cord OPPOVI1P1U9 SB 4602"D x 4.5"W table top cut out size - specify placement OPPOVI1P1U9 BB 460














module description Model Nofinish code List

cord length option

Ovi Round(no convenience outlet)

1 power, 1 dual charging USB-A, 108" cord OPPOVR1P1U 9 SB 460 108"2"D x 4.5"W table top cut out size - specify placementOPPOVR1P1U 9 BB 460 108"

OPPOVR1P1U 9 GW 460 108"

108"2 power, 1 dual charging USB-A, 108" cord OPPOVR2P1U 9 SB 460 108"2"D x 5.25"W table top cut out size - specify placementOPPOVR2P1U 9 BB 460 108"


2 power, 108" cord OPPOVR2P0U 9 SB 460 108"2"D x 4.5"W table top cut out size - specify placementOPPOVR2P0U 9 BB 460 108"


Palla3 power OPPPAL3P0A0C __ WW 2403" diameter table top cut out size, specify location OPPPAL3P0A0C __ BB 240

2 power, 1 dual charging USB-A OPPPAL2P1A0C __ WW 3303" diameter table top cut out size, specify location OPPPAL2P1A0C __ BB 330

2 power, 1 USB-A, 1 USB-C OPPPAL2PAC0D __ WW 3303" diameter table top cut out size, specify location OPPPAL2PAC0D __ BB 330

OVI SERIES FINISH CODE LEGEND:

SB - Silver powdercoat finish, black simplex finish

BB - black powdercoat finish, black simplex finish

GW - Gloss white powdercoat finish, white simplex finish

AB - brushed aluminum finish, black simplex finish

Ovi in surface cut out:

* REFERENCE THE CUT OUT SIZE UNDER EACH OVI POWER MODULE FOR THE VALUE OF "X"

Palla in surface cut out information: PALLA SERIES FINISH CODE LEGEND:

WW - Soft touch white plastic case finish, white trim finish, white simplex, white cord

BB - Soft touch black plastic case finish, black trim finish, black simplex finish, black cord

06 -+ $06 ft. cord


power/data modulesOvi in surfacewith and without convenience outlets

power/data modulesOvi Round in surface

Palla in surface



finish code list

cord length option

PowerFlexunder surface

PowerSnapunder surface

power stripunder surface 6-outlet, white, 6 ft 15 amp cord, UL tested/listed n/a OPPSTR6P0D06W 100 6 ft.

6-outlet, white, 15 ft 15 amp cord, UL tested/listed n/a OPPSTR6P0D15W 170 15 ft.6-outlet, white, 25 ft 15 amp cord, UL tested/listed n/a OPPSTR6P0D25W 210 25 ft.

circuit breaker cord

Versie undermount

1 power, 1 dual charging USB-A, black finish 2 OPPVER1P1A0D __ BK 260

2 power, black finish 2 OPPVER2P0A0D __ BK 160

Versie in surface1 power, 1 dual charging USB-A 2 OPPVES1P1A0D __ GB 4802"D x 3.25"W table top cut out required, 2 OPPVES1P1A0D __ GW 480specify location 2 OPPVES1P1A0D __ SP 480

2 power 2 OPPVES2P0A0D __ GB 3802"D x 3.25"W table top cut out required, 2 OPPVES2P0A0D __ GW 380specify location 2 OPPVES2P0A0D __ SP 380

06 -+ $06 ft. cord



Versie in surface cut out information: VERSIE IN SURFACE SERIES FINISH CODE LEGEND:

GB- Gloss black finish, black simplex finish, black cord

GW - Gloss white finish, white simplex finish, black cord

SP - Silver powdercoat finish, white simplex finish, black cord

**these finishes are not available for the Versie undermount unit

8 Wires, 4 circuits, 20 Amps each(13) Duplex receptacles per circuit, (52) 15 Amp Duplex receptacles per hardwired power infeed maximumUL Listed as a Manufactured Wiring System

EMAIL [email protected] FOR MORE INFORMATION

4 Wires, 2 circuits, 20 Amps each (Circuit 1 and 2 only)(13) Duplex receptacles per circuit, (26) 15 Amp Duplex receptacles per power infeed maximumUSB Duplex is 2 Amp per portUL Listed as a Manufactured Wiring SystemRequires less space, Easy to install and reconfIgureEMAIL [email protected] FOR MORE INFORMATION


finish code list

cord length option

Wayne Shared Media 4 power, 2 dual charging USB-A n/a OPPWAM4P4H2U 9 BB 8,590 108" cord4 HDMI Show Me cables OPPWAM4P4H2U 9 SS 8,590 108" cordHDMI 4 position switch box OPPWAM4P4H2U 9 WW 8,590 108" cord15' HDMI monitor cable, 108" cord. Sliding door grommet included 7.5"D x 12.125"W table top cut out, specify location

there is room for (2) telecom data plates in this unitplates are not included in the price but they can be purchased separately

additional adapter accessories availableemail [email protected] for assistance.

Zig freestanding 1 power, 1 USB-A, 1 USB-C 2 OPPZIG1PAC0D __ AW 550Ash hardwood finish, white painted steel finishwhite braided cord finish

1 power, 1 USB-A, 1 USB-C 2 OPPZIG1PAC0D __ CS 550Cherry hardwood finish, storm painted steel finishstorm braided cord finish

1 power, 1 USB-A, 1 USB-C 2 OPPZIG1PAC0D __ WB 550Walnut hardwood finish, black painted steel finishblack braided cord finish

06 -+ $06 ft. cord



WAYNE SHARED MEDIA SERIES FINISH CODE LEGEND:

BB - Black grommet finish

SS - Silver grommet finish

WW - White grommet finish

power/data modulesPowerFlex, PowerSnap, Power Strip undermountVersie undermount, Versie in surface

power/data modulesWayne Shared Media in surface

Zig freestanding


description model no. listZoey wire management hole the cord will route through the mouse hole and exit at the bottom of the column(1) 1.5" hole at the top / inside of 1 column for a single T or C type base OBTWMH1Z 40(2) 1.5" holes at the top / inside of each column for a set of (2) T or C type bases OBTWMH2Z 80(not available for adjustable height bases)

Ria / Keller wire mangement holes for T or C bases OBTWMH2RG 50wire management mouse holes (top & bottom) for one baseEach hole is a 1.25" x 2.25" oval. Removeable grommets narrow the hole to 1.25" diameterNote that the wire management grommet cannot be made with the polished finish

(not available for adj ht bases)

Ria / Keller wire management cone shaped top plate and WM hole OBXWMPCC 300metal cone-shaped top plate conceals and protects center mounted power module in surface Concealed wires exit down inside the base column and out at the bottom of the base columnAvailable for single column Ria and Keller X and Y basesNote that the cone cannot be made with the polished finishblack or white paint is available for the cone with a polished baseCirco in surface power unit can be used with this cone wire manager(not available for adj ht bases)

Magnetic wire manager for a square or rectengular column OBWMMM18 100standard dimensions: 17 3/4” length, 2” width, 1.06” depthlarge area for wire management of multiple power and cord sizeseasy installation and reposition to any metal surface** specify metal finish - not available in a polished or wrinkle finish

Nantes / Marius wire management options

OBWMPD1H 100

OBDWMCHF 90wire management hole in the center of a Nantes / Marius disc base for floor access-3" column has a 1 7/8" dia thru hole at bottom / center-4" column has a 2 1/4" dia thru hole at the bottom / center

power box mounting plate with 1 mouse hole in the column near the bottom for the cord to exit to a wall or floor outlet away from the disc base

-Power Box Dimensions 12” x 12”, 3” high from top of the column to table top-Power Box Hole Dimensions: 2” dia. on a 3” column, 3 1/2” dia on a 4” column-Bottom Hole Dimensions: 1 1/2” dia. hole on a 3” column, 2” dia. hole on a 4” column

*please note that power supply units and cords vary in size and shape. Please email [email protected] to ensure that your power supply and cord will work with the table specifications and desired wire management options.

description model no. listmetal snap on (not available for adjustable ht bases)

easy to attach, access, or movemetal finish to match base, SPECIFY FINISH (not available in a polished or wrinkle finish)2" round column version AWMRM2NB 703" round column version AWMRM3NB 80** Can be used with any base that has a 2" or 3" round column

universal wire managerblack (B) 26" OBTWMUPB 50silver (S) 26" OBTWMUPS 50

double stick tape is used to adhere the wire manager to the base

J channel black nylon wire manager with double stick tape2.5" x 1" x 71" long AWMJCH72 1102.5" x 1" x 59" long AWMJCH60 1002.5" x 1" x 47" long AWMJCH48 802.5" x 1" x 35" long AWMJCH36 602.5" x 1" x 23" long AWMJCH24 40

large J channel 72" wire manager with double stick tape AWMJP72B 210Black nylon3 1/4" x 1" x 71" longadditional lengths available

wire clip set AWMCL10N 30perfect for single power cord or small group of data cordscables easily installed or removed without removing clip.4" wide x 1.156" long with .50" cable bundle diameternatural nylonset of (10)includes (10) wood screws to attach under surfaceadditional sizes available

*please note that power supply units and cords vary in size and shape. Please email [email protected] to ensure that your power supply and cord will work with the table specifications and desired wire management options.

wire management wire management


description model no. list

nylon 3" diameter, black OTGRD3NB 50nylon 3" diameter, white OTGRD3NW 50nylon 3" diameter, silver OTGRD3NS 50

Asti metal 3.39" x 5.68" grommet with flush hinged doorflush hinged door, black finish OTGRADMB 130flush hinged door, silver finish OTGRADMS 130flush hinged door, white finish OTGRADMW 130flush hinged door, Brushed Aluminum finish OTGRADBA 200flushhinged door, Stainless Steel finish OTGRADSS 200

* Note that for Asti grommets you will need to specify the location with the chart and also confirm the orientation:

This image represents the Asti grommet running long ways on the top (standard). Please indicate if you would like it running short ways on the top instead (the cut out will be rotated 90 degrees).

Specify the grommet location on your PO, note that the above pricing is for a single (1) grommet, if you specify a grommet location that shows (2) grommets then you will need to include 2 grommets per table on your PO. Email [email protected] for assistance.

grommets grommet location chart


material description width model no. list

laminate fixed (LX)

35.5 OMLX836 20041.5 OMLX842 21047.5 OMLX848 22053.5 OMLX854 28059.5 OMLX860 29065.5 OMLX866 33071.5 OMLX872 340

laminate fixed modesty wire channel60" x 3" x 3" black 59.5 AWMLXWC5 19072" x 3" x 3" black 71.5 AWMLXWC6 210attaches to inside of laminate modesty with factory installed double sided tapeadditional lengths available

perforated metal fixed (MP) width model no. List

35.75 OMMP936 44047.75 OMMP948 47059.75 OMMP960 53071.75 OMMP972 590

solid metal fixed (MS) width model no. List

35.75 OMMS936 43047.75 OMMS948 46059.75 OMMS960 52071.75 OMMS972 550

acrylic fixed (AX) width model no. List47.5 OMAX948S 47059.5 OMAX960S 69971.5 OMAX972S 700

47.5 OMAX948B 47059.5 OMAX960B 60071.5 OMAX972B 700

8" high fixed laminate modesty panelSelect laminate and edge color3/8” thick particle board laminated with 0.050” thick plastic available with PVC or laminate edgeAttaches with "L" bracket fixed hardware

We recommend using tops with 90 degree corners to allow the modesty to be flush with the front (PVEA and UPER for example). Vinyl edge tops have radiused corners so modesty must be positioned back from the front edge.

9" high solid metal fixed modesty panel

Inside metal wire raceway included20 gauge fabricated steel


* Contact customer service to ensure that any power or accessories you plan to specify will work with this modesty panel and your base selection,

9" high perforated metal fixed modesty panelInside metal wire raceway included20 gauge fabricated steel


* Contact customer service to ensure that any power or accessories you plan to specify will work with this modesty panel and your base selection, email [email protected]

8" high acrylic modesty panel3/8" double sided frosted acrylic panelincludes (2) brackets and covers for 48" panelsincludes (3) brackets and covers for 60" & 72" panelssilver (S) or black (B) brackets available



material description width model no. list

fabric hanging (FH)

35.75 OMFH1036 24041.75 OMFH1042 25047.75 OMFH1048 26053.75 OMFH1054 27059.75 OMFH1060 28065.75 OMFH1066 29071.75 OMFH1072 300

laminate hanging (LH) width model no. List

35.5 OMLH836 30041.5 OMLH842 32047.5 OMLH848 34053.5 OMLH854 40059.5 OMLH860 42065.5 OMLH866 460

*the modesty panel will flip "DOWN" 71.5 OMLH872 480(do not use with C type bases)

laminate reverse hinge (RH) width model no. List

35.5 OMRH836 37041.5 OMRH842 41047.5 OMRH848 43053.5 OMRH854 47059.5 OMRH860 49065.5 OMRH866 55071.5 OMRH872 570

* modesty panel will flip "UP"

perforated metal for flip nest (PH) width model no. List

47-7/8 OMPH948 61059-7/8 OMPH960 66071-7/8 OMPH972 720

* modesty panel will flip "UP"

acrylic for flip nest (AH) width model no. List47.5 OMAH948S 50059.5 OMAH960S 66071.5 OMAH972S 760

47.5 OMAH948B 50059.5 OMAH960B 66071.5 OMAH972B 760

* modesty panel will flip "DOWN"

10" high fabric hanging modesty panelBlack mesh fabric with black liner Additional non-standard widths available up to 72" wide.Steel rod frame Pivot hardware allows modesty to swing & fold for easy storageHidden wire raceway on inside is secured with multiple Velcro strips.

* Contact customer service to ensure that any power / accessories you plan to specify will work with this modesty panel, email [email protected]

We recommend using tops with 90 degree corners to allow the modesty to be flush with the front (PVEA and UPER for example). Vinyl edge tops have radiused corners so modesty must be positioned back from the front edge.

8" high reverse hinge laminate modesty panel for Zoey / Keller over 24" deep or flip nest base table - the modesty panel shall flip "UP" when the table is in the nested position

Select laminate and edge color3/8” thick particle board laminated with 0.050” thick plastic laminate available with PVC or laminate edgeattaches with Reverse hinge modesty panel bracketFor Zoey or Keller flip nest tables that are over 24" deep or ANY "C" type base flip / nest table so the modesty panel will flip up instead of down


9" high perforated metal modesty panel .125 diameter holes on a 2 x 2 inch gridreverse hinge modesty panel bracket

(ME) Standard metal powder coat finishes :Flat Black (FB) or Metallic Silver (MS). **Additional powder coat metal finishes are available on orders with a quantity of 10+ modesty panels in the same size and finish


8" high hanging laminate modesty panel (Do not use with C bases)Select laminate and edge color3/8” thick particle board laminated with 0.050” thick plastic laminate available with PVC or laminate edgeattaches with Nester series hanging modesty panel bracket

**Do not use the laminate hanging modesty panel for Zoey or Keller flip nest tables over 24" deep, 24" deep tops are OK but any other size over 24" could result in the modesty panel hitting the legs when the table is in the nested position.


8" high acrylic modesty panel3/8" double sided frosted acrylic panelincludes (2) brackets and covers for 48" panelsincludes (3) brackets and covers for 60" & 72" panelssilver (S) or black (B) brackets available


modesty panelsfixed

modesty panelsfor flip/nest tables


Table Locks and Plates

8 sets

Anti-sag bars

description model no. listTable Locks and Plates Small Table Lock Set OTL2P8KB 100

3" x 6" heavy-duty 11 gauge steel plate setincludes 2 plates, 8 knobs (4 per plate), inserts for each seamplates retract and hide away when not in useBlack finish

Large Plate Lock OTL1P4KB 604" x 12" heavy-duty 11 gauge steel plateincludes 1 plate, 4 knobs, inserts for each seamone plate attaches tables up to 42" deepplates retract and hide away when not in useBlack finish

Clic Table Lock Set OTLCLICZ 130twist and lock into placeset includes four components (two locks) for each seam and (8) screws zinc finish 3.5" diameter

Fixed Plate Set (set of 50 plates per box) OTL2PWSB50 7103" x 6" heavy-duty 1/8" thick steel platesincludes 50 plates and wood screws for each seam (no longer sold individually)Black finish

Typical Configurations

8 sets 5 sets 3 sets

Anti-sag bars14-guage rectangular black steel bar mounted under the topall surfaces 54" or longer include top stiffeners with the top pricing

Email [email protected] to confirm that the table ganging devices will fit on the top with all other components specified for the table.

accessories

locks and anti-sag bars


LPL (M) HPL (A) HPL (B) HPL (C)

credenza dimensions description model no. list list list list24 x 36 x 30H 2 door, 1 adj shelves with silver bar pulls ASCR243630__ 3,350 3,950 4,150 4,56024 x 36 x 36H 2 door, 1 adj shelves with silver bar pulls ASCR243636__ 3,470 4,100 4,310 4,74024 x 36 x 36H 2 door, 2 drawer, 2 adj shelves with silver bar pullsASBC243636__ 3,760 4,460 4,690 5,170

24 x 48 x 30H 4 door, 2 adj shelves with silver bar pulls ASCR24830__ 3,640 4,320 4,530 5,00024 x 48 x 36H 4 door, 2 adj shelves with silver bar pulls ASCR244836__ 3,780 4,490 4,710 5,20024 x 48 x 36H 4 door, 4 drawer, 2 adj shelves with silver bar pullsASBC244836__ 4,060 4,850 5,090 5,630





* credenzas come with silver lock cores

STOCK MELAMINE (LPL) COLORS:DESIGNER WHITE FROSTY WHITE FASHION GRAY SLATE GRAY BLACK FUSION MAPLE KENSINGTON MAPLE MONTICELLO MAPLE RIVER CHERRY WILD CHERRY BLEACHED LEGNO NEUTRAL TWILL PRESTIGE WALNUT SELECT CHERRY CAFELLE* The body of the credenza will be in LPL laminate and the top will be in HPL laminate. LPL laminate is rated for vertical surfaces.

Formica + Wilsonart HPL laminate finish grades listed on page 16-23. For additional laminate grades, contact Symphony

For complete credenza model number, insert laminate grade selection:M melamine / low pressure laminate (LPL)A grade A laminate (HPL)B grade B laminate (HPL)C grade C laminate (HPL)

Credenza options:

Vent with black vent grills, model number OACREDVENT, $50 list per vent

Grommet for wire management on the back of the credenza, model number OACREDGROM, $30 list per grommet

36" L credenza with 2 doors*available in 30"H or 36"H

36" L credenza with 2 doors

* touch latch hardware and soft close hinges are available with an upcharge, contact [email protected] for pricing

Credenza standard specifications

36" L credenza with 2 doors*available in 30"H or 36"H

36" L credenza with 2 doors and 2 drawers,

*Credenza without doors image reflects a 48 inch to 72" long version with 2 adjustable shelves

48" - 72" L credenza with 4 doors*available in 30"H or 36"H

48" - 72"L credenza with 4 doors and 4 drawers, 36"H

84" - 96"L credenza with 6 doors and 6 drawers, 36"H

48" - 72" L credenza with 4 doors*available in 30"H or 36"H

credenzas credenzas


LPL (M) HPL (A) HPL (B) HPL (C)

lectern Description model no. list list list listlaminate lectern ALLS4SDC242448__ 2810 3,510 3,680 4,210flat top surfaceopen shelftwo shelves behind locked hinded doorwire management holesrecessed black locking casters (4)additional sizes, versions, options, configurations available

STOCK MELAMINE (LPL) COLORS:DESIGNER WHITE FROSTY WHITE FASHION GRAY SLATE GRAY BLACK FUSION MAPLE KENSINGTON MAPLE MONTICELLO MAPLE RIVER CHERRY WILD CHERRY BLEACHED LEGNO NEUTRAL TWILL PRESTIGE WALNUT SELECT CHERRY CAFELLE

Formica + Wilsonart HPL laminate finish grades listed on page 16-23. For additional laminate grades, contact Symphony

For complete lectern model number, insert laminate grade selection:M melamine / low pressure laminate (LPL)A grade A laminate (HPL)B grade B laminate (HPL)C grade C laminate (HPL)

Study carrels, laminate & acrylic sreens are available, contact Symphony for pricing and more information

lectern study carrel and screens


Terms of Sale

All prices listed are delivered pricing to the 48 contiguous states. Orders shipped to Hawaii, Alaska, and Puerto Rico ship to the port of embarkation. Product specifications and pricing is based on the information at time of publication. Symphony reserves the right to make changes at any time without notice regarding product specifications and pricing. Terms are Net 30 from the date of shipment (net 10, 1% discount). Prices are subject to change annually for changes in accordance with state contract regulations. All customer/nonstandard products are subject to a fifty percent (50%) advance deposit. There will be a service charge of 1 1/2% per month on all invoices past due. Symphony reserves the right to use its own or commercial carriers for the “best way” to ship, at its sole discretion.

Quality StandardsSymphony Furniture products meet or exceed applicable ANSI/BIFMA durability and safety standards when properly installed with appropriate size base.

WarrantyAll Symphony products are guaranteed against defect for a period of ten (10) years. Electrical items and height adjustment mechanisms are guaranteed against defect for a period of five (5) years. Symphony will replace or repair (at our discretion) without cost to our customers any item found to be defective as a result of defective material or workmanship. This excludes any item which has been abused or subjected to any use other than that which was originally intended for our product. Any repairs by our customer must receive specific written authorization from Symphony before work is initiated. This warranty is given to the initial purchaser and is valid for as long as the product is owned by the initial purchaser. The warranty, which runs from the date of manufacture, covers defects in materials and craftsmanship found during normal usage of the products during the warranty period. If a product is defective, and if written notice of the defect is given to Symphony within the warranty period, Symphony at its discretion will either repair or replace the defective product with a comparable component or product, or provide a refund of the purchase price. In no event shall liability under this warranty exceed the original purchase price. Warranty on plastic laminates is not covered by Symphony but is covered by laminate manufacturers under their specific warranty only. There are no other warranties expressed or implied. This warranty does not apply to damage caused by a carrier, alterations to the product not expressly authorized by Symphony. Symphony does not warrant the matching of color, grain, or texture except to within commercially acceptable standards. A product will not be considered defective, and Symphony will not be obligated to replace it, if that product is subject to any of Symphony’s written planning, installation or user guides, and is not installed or used as recommended. Please note that all Losa tables and conference/media tables should not be moved as a complete unit after the product has been assembled. If it is moved, then this could result in the tables being "racked" which could also disrupt the top plate and/ or cam lock routing and predrilled holes. This type of damage is not covered under warranty. In order to move a table, you must unassembled the table completely and re-assemble it in the new location.

Minimum order/Freight ChargeZone 1 orders less than $4,000 list (U.S.) - $180 net Zone 2 orders less than $4,000 list (U.S.) - $240 net

Sales PolicyPossession of this price list does not constitute authority to purchase and/or sell products contained herein. All orders are subject to acceptance by Symphony Furniture.New AccountsNew accounts can only be established with:Approval of Symphony sales representativeValid purchase orderState Resale/Exemption Certificate or order will be charged the appropriate sales taxApplication & credit references Payment in full (initial orders under $4,000 list) or 50% deposit in advance

generalinformation


Terms of Sale

All prices listed are delivered pricing to the 48 contiguous states. Orders shipped to Hawaii, Alaska, and Puerto Rico ship to the port of embarkation. Product specifications and pricing is based on the information at time of publication. Symphony reserves the right to make changes at any time without notice regarding product specifications and pricing. Terms are Net 30 from the date of shipment (net 10, 1% discount). Prices are subject to change annually for changes in accordance with state contract regulations. All customer/nonstandard products are subject to a fifty percent (50%) advance deposit. There will be a service charge of 1 1/2% per month on all invoices past due. Symphony reserves the right to use its own or commercial carriers for the “best way” to ship, at its sole discretion.

Quality StandardsSymphony Furniture products meet or exceed applicable ANSI/BIFMA durability and safety standards when properly installed with appropriate size base.

WarrantyAll Symphony products are guaranteed against defect for a period of ten (10) years. Electrical items and height adjustment mechanisms are guaranteed against defect for a period of five (5) years. Symphony will replace or repair (at our discretion) without cost to our customers any item found to be defective as a result of defective material or workmanship. This excludes any item which has been abused or subjected to any use other than that which was originally intended for our product. Any repairs by our customer must receive specific written authorization from Symphony before work is initiated. This warranty is given to the initial purchaser and is valid for as long as the product is owned by the initial purchaser. The warranty, which runs from the date of manufacture, covers defects in materials and craftsmanship found during normal usage of the products during the warranty period. If a product is defective, and if written notice of the defect is given to Symphony within the warranty period, Symphony at its discretion will either repair or replace the defective product with a comparable component or product, or provide a refund of the purchase price. In no event shall liability under this warranty exceed the original purchase price. Warranty on plastic laminates is not covered by Symphony but is covered by laminate manufacturers under their specific warranty only. There are no other warranties expressed or implied. This warranty does not apply to damage caused by a carrier, alterations to the product not expressly authorized by Symphony. Symphony does not warrant the matching of color, grain, or texture except to within commercially acceptable standards. A product will not be considered defective, and Symphony will not be obligated to replace it, if that product is subject to any of Symphony’s written planning, installation or user guides, and is not installed or used as recommended. Please note that all Losa tables and conference/media tables should not be moved as a complete unit after the product has been assembled. If it is moved, then this could result in the tables being "racked" which could also disrupt the top plate and/ or cam lock routing and predrilled holes. This type of damage is not covered under warranty. In order to move a table, you must unassembled the table completely and re-assemble it in the new location.

Minimum order/Freight ChargeZone 1 orders less than $4,000 list (U.S.) - $180 net Zone 2 orders less than $4,000 list (U.S.) - $240 net

Sales PolicyPossession of this price list does not constitute authority to purchase and/or sell products contained herein. All orders are subject to acceptance by Symphony Furniture.New AccountsNew accounts can only be established with:Approval of Symphony sales representativeValid purchase orderState Resale/Exemption Certificate or order will be charged the appropriate sales taxApplication & credit references Payment in full (initial orders under $4,000 list) or 50% deposit in advance

TaxesSymphony requires a state Resale/Exemption Certificate on file in our main office. Sales made without a certificate will be charged the appropriate sales tax as required by law.

Freight TermsFreight charges will be prepaid on all shipments unless special arrangements have been made. Normal delivery is dock to dock. Special requests, such as inside delivery, lift gate service; residential delivery, etc. are subject to additional charges. All accessorial charges not requested on purchase order will be the responsibility of the consignee. Symphony reserves the right to select the “best way” shipment method and means. Delivery date and times are at the discretion of the carrier within reasonable transit time unless special arrangements have been made between the customer and Symphony.

AcknowledgementsEvery order is acknowledged. Orders will be manufactured and invoiced based upon the information on the acknowledgment. If there is any discrepancy, please notify Symphony immediately. Orders are accepted by Symphony per terms on the acknowledgment. All acknowledgements contain an estimated shipping date. Your order may actually ship earlier than the expected shipping date, depending on the backlog at the time. If you do not want the merchandise earlier than the specified date, please write “Do not ship for arrival before______” on your purchase order.

Revised OrdersOrders requiring changes to the product or additional options will not incur additional costs unless orders have been processed. Orders revised after being manufactured are subject to additional charges.

Changes or CancellationsOrders entered and acknowledged cannot be changed or cancelled without Symphony’s consent. The customer is responsible for all costs incurred, and a minimum cancellation or change charge of 25% will be invoiced if an order is cancelled or changed within 15 working days of shipment. Orders for nonstandard products are not cancelable.

Shipments on HoldAny shipment placed on hold by customer’s request or due to balance owed, will be manufactured per the originally scheduled ship date. Storage charges will begin to accrue 7 days from that date. Any order held by our factory over 30 days will be billed and must be promptly paid even though shipment is held at factory at customer’s request.

Special or Additional Freight ChargesSymphony Furniture reserves the right to charge the following when incurring additional freight costs. Destination changes after product has shipped - $50.00 plus $2.00/mile after the first 10 miles. Wait time for delivery of greater then two hours - $130.00/hour. Trailer drop/switch delivery - $200.00/trailer. Deliveries Friday (after 3:00pm) through Sunday or Holidays - $600.00/day. Third party to pick up freight at the terminal - $200.00.

Redelivery of FreightWhen redelivery of merchandise is required because customer is not ready to accept merchandise, and no notification of this fact is given to the factory at least two weeks prior to the scheduled ship date, the actual costs for freight, restocking and re-handling, plus 5% at the order value, will be billed to the customer.

Receipt of Order1. Carefully inspect all incoming items2. If an item is damaged, please note the damage on the delivery receipt.3. Immediately contact the carrier to request an inspection and their freight claim form.4. File the freight claim form with the carrier within five days of receipt.5. If any item is missing or is not correct, please contact Symphony immediately.Any concealed damages or shortage not reported with 5 business days from delivery shall be the sole responsibility of the customer.

terms and conditions terms and conditions


Shipment Damage ClaimsLegal title of merchandise passes to the buyer upon acceptance of the carrier. All merchandise is packed to comply with carrier requirements. Shipments should be carefully inspected by the consignee before acceptance and the delivery carrier should be requested to record any damage or shortage. If further damage is found after delivery, immediate inspection by the delivering carrier should be requested. Notification of concealed damages must be made to the delivering carrier within 5 days after delivery of merchandise. Carrier liability ceases after this period. Damaged freight must be kept at the point of delivery in the original packing for inspection by the carrier. Please be advised that if the carrier obtains a clear receipt for shipment, they are no longer responsible for damage or shortages. Please note that electronically signing the carrier’s tablet at the time of delivery means that you are accepting the delivery and no damages are being notated. If you see anything that indicates a shipment has been tampered with or shows signs of damage, then ask the driver to report it to the freight company and take pictures.

Shipment Shortage ClaimsShortage claims reported after 10 days beyond shipment date will not be honored.

Unopened Shipment Damage ClaimsNeither Symphony nor the carrier is responsible for concealed damage claims if shipments are left unopened. Notification of concealed damages must be made to the delivering carrier within 5 days after delivery of merchandise. Refusal to accept an order from the carrier does not relieve you of the responsibility for payment, and may incur additional charges.

Lost ShipmentsSymphony issues a bill of lading to consignee on the date of shipment. If shipment is not received within 20 days of shipment date, notify us. Symphony and the carrier do not assume obligation for lost or damaged shipment claims after 6 months of shipping date.

Title to MerchandiseTitle to merchandise shall pass to the buyer upon delivery by Symphony to the carrier. For purposes of risk or loss, all shipments are F.O.B. factory. Buyer acknowledges that once Symphony delivers the goods to the carrier, title to the goods and risk of loss will pass to the buyer. If the goods are damaged by the carrier while in transit, the buyer has the sole obligation of seeking recourse from the carrier.

ReturnsSymphony will not permit return of materials without written consent if materials shipped are as acknowledged. Return shipments when accepted are subject to a re-handling/restocking charge, in accordance with the state contract after the merchandise is received and inspected. All freight or express charges must be prepaid on return shipments; otherwise, they will not be accepted. Damaged materials and all items specially built to order cannot be returned under any conditions.

Repair and ReplacementAny labor charges for correcting a manufacturing problem must be submitted and approved before correction is undertaken, if the units are under warranty. Labor charges will not be paid if the estimate was not submitted and approved prior to labor being completed.

Contact InformationSymphony Furniture, 1720 Mars Hill Road, Suite 8-287, Acworth, GA 30101, GA 30318-1732Phone: 866.507.7795Fax: 888.683.0007www.Symphonytables.comEmail: [email protected]

Table Care and Maintenance

Laminate Surfaces, Vinyl & PVC edgesHigh-pressure laminate is durable and requires minimal maintenance. To clean the surface, use a damp cloth or sponge and a mild soap or detergent. Rinse with clean, clear water. Wipe the entire surface, moving with the pattern and follow with a clean, dry, soft cloth. When a wood edge exists, follow “Wood Edge and Veneer” instructions.

Difficult “stains” such as coffee or tea can be removed using a mild household cleaner/detergent and a soft bristle brush, repeating as necessary. If stain persists, use a paste of baking soda & water and apply with a soft bristled brush. Light scrubbing for 10-20 strokes should remove most stains (excessive scrubbing or exerting too much force may damage the surface, especially gloss finish surfaces). Any remaining stains may require the use of undiluted household bleach or nail polish remover. Apply to stain and let stand no longer than two minutes. Rinse thoroughly with warm water & wipe dry. Step may be repeated. However, prolonged exposure of bleach to surface will cause discoloration.

Abrasive pads, scouring powders or cleansers may permanently dull & scratch the surface making the laminate susceptible to staining. Harsh chemicals such as oven, toilet or drain cleaners will etch & discolor laminates. If spills of these products occur, remove immediately, rinse thoroughly, and wipe dry.

High pressure laminates have high heat resistance, however exposure to temperatures greater than 135 degrees C (275 degrees F) is not recommended. Prolonged exposure to temperatures above 65 degrees C (150 degrees F) may result in separation of the laminate from the substrate. Protect the surface from heat generating appliances by using a trivet or insulating pad.

Do not use sharp objects directly on the laminate surface. A counter saver or chopping block is recommended.

HP laminate have excellent impact resistance. However, heavy objects dropped on the surface may chip or crack the laminate.

Powder Coated MetalClean with a mild soap solution and rinse with clean clear water. Wipe the entire surface and follow with a clean, dry cloth to buff dry.

Chromed MetalClean with a wet cloth or window cleaner. For scuff marks or heavy soiling, apply a non-abrasive automotive chrome polish as directed.

Mechanical PartsClean any lint or debris from the moving parts of the tilt or folding mechanisms. Do not apply any lubricant.

terms and conditions table care and maintenance

2019 PRICE LIST136

Environmental Statement & SolutionsEveryone at Symphony shares the concern of protecting the environment. We use environmentally friendly materials in our products and processes wherever possible. Environmental awareness is something we strive to incorporate into every aspect of our lives. Recycled/recyclable packing/shipping materials are used whenever possible. All plastic, cardboard, scrap metal (steel, stainless steel, & aluminum), used oil, and wood pallets accumulated from the manufacturing process are recycled. All our marketing materials are printed on recycled/recyclable paper.Symphony is committed to bringing you the designs & solutions needed for your project but also dedicated to preserving the Earth's natural resources for the future.

Surface Core or SubstrateStandard particleboard core100% pre-consumer recycled wood fiber particle board certified by Scientific Certification Systems (SCS). Particleboard is at least 90% wood fiber by weight.Forest Stewardship Council (FSC); mixed credit available (optional).Meets California Air Resources Board (CARB) Regulation 93120.2, Phase 1 emissions limits No Added Urea-Formaldehyde (NAUF) Particleboard (optional)100% pre-consumer recycled wood fiber particle board certified by ScientificCertification Systems (SCS) Particleboard is at least 90% wood fiber by weightForest Stewardship Council (FSC) Mixed Credit Available (optional)Meets California Air Resources Board (CARB) Regulation 93120.2, Phase 1 emissions limitsNo added urea-formaldehyde (NAUF); SCS certified.Collaborative for High Performance Schools (CHPS) Section 01350 CompliantEnvironmentally Preferable Product (EPP) Certified by the Composite Panel AssociationSurface MaterialHigh Pressure Laminate (HPL)Wilsonart, Formica, Nevamar and Pionite laminates are GREENGUARD Indoor Air Quality Certified®Wilsonart, Formica, and Pionite laminates are GREENGUARD for Children and Schools Certified®AdhesivesWater based adhesiveLow VOC emissionsDoes not contain urea-formaldehydeEdge MaterialsABS Plastic edge - 2mm ABS plastic edges are available in an array of standard colors

ABS is a recyclable plastic, unlike PVC materialChlorine Free Polymer can be incineratedEcologically responsible chlorine-free polymer may be recycled or incinerated with general wood waste, reducing the amount going into landfills

Urethane edgeUrethane is comprised of approximately 65% refined vegetable oil by weight.Vegetable oil is a rapidly renewable, natural materialExtreme durability results in a longer lifespan than surfaces made from other materials.

BasesZoey57% initial recycled content99% recyclablePolished aluminum environmentally friendly alternative to polished chrome Standards collectionProduced with a chemical vs. electrical deposition, and encompasses a chemical reaction to metal (ferrous) material

GeneralMost bases recyclablePowder coat much more environmentally friendly alternative than liquid metal finishing (over-spray collections increase utilization to over 95%)For LEED-CI V2.0 Credit and Point Information, visit www.symphonytables.com

environmental statement and solutions

table environments 2019 price list · 2020-03-16 · x and y fixed 58 flip 60 adjustable height 61...

Documents