t52/11/19 request for proposal for the supply ... · preparation of bid response 6 6. supplier...
TRANSCRIPT
T52/11/19
Request for Proposal for the Supply
Implementation, Support and
Maintenance of an Asset and Liability
Management (ALM) Tool for the IDC
(“ALM Solution”)
BID CLOSING DATE: FRIDAY,
17 JANUARY 2020 AT 12:00 NOON
Industrial Development Corporation
Page 2
TABLE OF CONTENTS
SECTION 1: GENERAL CONDITIONS OF BID 4
1. Proprietary Information 5
2. Enquiries 5
3. Bid Validity Period 5
4. Instructions on submission of Bids 5
5. Preparation of Bid Response 6
6. Supplier Performance Management 6
7. Enterprise and Supplier Development 6
8. IDC’s Rights 7
9. Undertakings by the Bidder 7
10. Reasons for disqualification 8
11. Local Production and Content 8
12. Response Format (Returnable Schedules) 9
13. Evaluation Criteria and Weightings 11
14. Promotion of Emerging Black owned Service Providers 12
SECTION 3: FUNCTIONAL REQUIREMENTS SPECIFICATION 13
1. Special instructions to bidders 14
2. Background Information 14
3. IDC Server Environment 14
4. Scope of Work 14
5. Project Timelines 16
6. Glossary 16
7. Technical Evaluation Criteria 16
SECTION 4: PRICE PROPOSAL 25
SECTION 5: ANNEXURES 31
Annexure 1: Acceptance of Bid Conditions and Bidder’s Details 32
Annexure 2: Tax Compliance Requirements 35
Annexure 3: Supply chain management practices questionnaire 36
Annexure 4: Declaration of Interest 38
Annexure 5: Certificate of Independent Bid Determination 42
Annexure 6: Shareholders and Directors Information 45
Annexure 7: Response Format for Section 3 47
Annexure 8: BEE Commitment Plan 49
Page 3
Annexure 9: Disclosure Statement 50
Annexure 10: Local Content Declaration (If Relevant) 51
Industrial Development Corporation
Page 4
SECTION 1: GENERAL CONDITIONS OF BID
Page 5
1. Proprietary Information
Industrial Development Corporation of SA Ltd (IDC) considers this Request for Proposal
(RFP) and all related information, either written or verbal, which is provided to the
respondent, to be proprietary to IDC. It shall be kept confidential by the respondent and its
officers, employees, agents and representatives. The respondent shall not disclose,
publish, or advertise this RFP or related information to any third party without the prior
written consent of IDC.
2. Enquiries
2.1 All communication and attempts to solicit information of any kind relative to this RFP
should be channelled in writing to:
Name: Mr Brian Dlamini
Telephone Number: Office: +27 11 269 3181
Email address: [email protected]
2.2 Enquiries in relation to this RFP will not be entertained after 16h00 on 8 January 2020.
2.3 The enquiries will be consolidated and IDC will issue one response and such response
will be posted, within two days after the last day of enquiries, onto the IDC website
(www.idc.co.za) under tenders i.e. next to the same RFP document.
2.4 The IDC may respond to any enquiry in its absolute discretion and the bidder
acknowledges that it will have no claim against the IDC on the basis that its bid was
disadvantaged by lack of information, or inability to resolve ambiguities.
3. Bid Validity Period
Responses to this RFP received from bidders will be valid for a period of 120 days
counted from the bid closing date.
4. Instructions on submission of Bids
4.1 Bids should be submitted in duplicate (2 hard copies) and one electronic copy (on CD)
in PDF format all bound in a sealed envelope endorsed, T52/11/19: Request for
Proposal for the Supply, Implementation, Support and Maintenance of an Asset and
Liability Management (ALM) Tool. The sealed envelope must be placed in the bid box at
the Main Reception area of the IDC Building, 19 Fredman Drive Sandton by no later
than 12:00 noon on Friday, 17 January 2020.
4.2 Bids must be submitted in the prescribed response format, herein reflected as
Response Format.
4.3 The bid closing date, bidder name and the return address must also be endorsed on
the envelope.
4.4 If a courier service company is being used for delivery of the bid response, the bid
description must be endorsed on the delivery note/courier packaging and the courier
must ensure that documents are placed / deposited into the bid box. The IDC will not
be held responsible for any delays where bid documents are handed to the IDC
Receptionist.
Page 6
4.5 No bid response received by telegram, telex, email, facsimile or similar medium will be
considered.
4.6 Where a bid response is not in the bid box at the time of the bid closing, such a bid
document will be regarded as a late bid. It is the IDC’s policy not to consider late
bids for tender evaluation.
4.7 Amended bids may be sent in an envelope marked “Amendment to bid” and should be
placed in the bid box before the closing time.
5. Preparation of Bid Response
5.1 All the documentation submitted in response to this RFP must be in English.
5.2 The bidder is responsible for all the costs that it shall incur related to the preparation
and submission of the bid document.
5.3 Bids submitted by bidders which are, or are comprised of companies must be signed by a
person or persons duly authorised thereto by a resolution of the applicable Board of
Directors, a copy of which Resolution, duly certified, must be submitted with the bid.
5.4 The bidder should check the numbers of the pages of its bid to satisfy itself that none
are missing or duplicated. No liability will be accepted by IDC in regard to anything
arising from the fact that pages of a bid are missing or duplicated.
5.5 Bidder’s tax affairs with SARS must be in order (tax compliant status) and bidders must
provide written confirmation to this effect as part of their tender response.
6. Supplier Performance Management
Supplier Performance Management is viewed by the IDC as a critical component in
ensuring value for money acquisition and good supplier relations between the IDC and all
its suppliers.
The successful bidder shall upon receipt of written notification of an award, be required to
conclude a Service Level Agreement (SLA) with the IDC, which will form an integral part of
the supply agreement. The SLA will serve as a tool to measure, monitor and assess the
supplier performance and ensure effective delivery of service, quality and value-add to
IDC’s business.
Successful bidders will be required to comply with the above condition, and also provide a
scorecard on how their product / service offering is being measured to achieve the
objectives of this condition.
7. Enterprise and Supplier Development
The IDC promotes enterprise development. In this regard, successful bidders may be
required to mentor SMMEs and/ or Youth-Owned businesses. The implications of such
arrangement will be subject to negotiations between the IDC and the successful bidder.
Page 7
8. IDC’s Rights
8.1 The IDC is entitled to amend any bid condition, bid validity period, RFP specification, or
extend the bid closing date, all before the bid closing date. All bidders, to whom the
RFP documents have been issued and where the IDC have record of such bidders,
may be advised in writing of such amendments in good time and any such changes will
also be posted on the IDC’s website under the relevant tender information. All
prospective bidders should therefore ensure that they visit the website regularly and
before they submit their bid response to ensure that they are kept updated on any
amendments in this regard.
8.2 The IDC reserves the right not to accept the lowest priced bid or any bid in part or in
whole. It normally awards the contract to the bidder who proves to be fully capable of
handling the contract and whose bid is functionally acceptable and/or financially
advantageous to the IDC.
8.3 The IDC reserves the right to award this bid as a whole or in part.
8.4 The IDC reserves the right to conduct site visits at bidder’s corporate offices and / or at
client sites if so required.
8.5 The IDC reserves the right to consider the guidelines and prescribed hourly
remuneration rates for consultants as provided in the National Treasury Instruction
01 of 2013/2014: Cost Containment Measures, where relevant.
8.6 The IDC reserves the right to request all relevant information, agreements and other
documents to verify information supplied in the bid response. The bidder hereby gives
consent to the IDC to conduct background checks, including FICA verification, on the
bidding entity and any of its directors / trustees / shareholders / members.
8.7 The IDC reserves the right, at its sole discretion, to appoint any number of vendors to
be part of this panel of service providers.
8.8 The IDC reserves the right of final decision on the interpretation of its tender
requirements and responses thereto.
9. Undertakings by the Bidder
9.1 By submitting a bid in response to the RFP, the bidder will be taken to offer to render all
or any of the services described in the bid response submitted by it to the IDC on the
terms and conditions and in accordance with the specifications stipulated in this RFP
document.
9.2 The bidder shall prepare for a possible presentation should IDC require such and the
bidder will be required to make such presentation within five (5) days from the date the
bidder is notified of the presentation. Such presentation may include a practical
demonstration of products or services as called for in this RFP.
9.3 The bidder agrees that the offer contained in its bid shall remain binding upon him/her
and receptive for acceptance by the IDC during the bid validity period indicated in this
RFP and its acceptance shall be subject to the terms and conditions contained in this
RFP document read with the bid.
9.4 The bidder furthermore confirms that he/she has satisfied himself/herself as to the
correctness and validity of his/her bid response; that the price(s) and rate(s) quoted
cover all the work/item(s) specified in the bid response documents; and that the price(s)
and rate(s) cover all his/her obligations under a resulting contract for the services
Page 8
contemplated in this RFP; and that he/she accepts that any mistakes regarding price(s)
and calculations will be at his/her risk.
9.5 The successful bidder accepts full responsibility for the proper execution and fulfilment
of all obligations and conditions devolving on him/her under the supply agreement and
SLA to be concluded with IDC, as the principal(s) liable for the due fulfilment of such
contract.
9.6 The bidder accepts that all costs incurred in the preparation, presentation and
demonstration of the solution offered by it shall be for the account of the bidder. All
supporting documentation and manuals submitted with its bid will become IDC property
unless otherwise stated by the bidder/s at the time of submission.
10. Reasons for disqualification
10.1 The IDC reserves the right to disqualify any bidder which does any one or more of the
following, and such disqualification may take place without prior notice to the offending
bidder, however the bidder will be notified in writing of such disqualification:
10.1.1 bidders who do not submit an original valid Tax Clearance Certificate and / or
proof of application of such as endorsed by SARS on the closing date and time of
the bid submission and / or failure to provide the IDC with its SARS issued Tax
Verification PIN code giving access to the IDC to electronically verify tax
compliance;
10.1.2 bidders who submit incomplete information and documentation according to the
requirements of this RFP document;
10.1.3 bidders who submit information that is fraudulent, factually untrue or inaccurate
information;
10.1.4 bidders who receive information not available to other potential bidders through
fraudulent means;
10.1.5 bidders who do not comply with any of the mandatory requirements as
stipulated in the RFP document;
10.1.6 bidders who fail to comply with FICA requirements
11. Local Production and Content
The IDC promotes Local Production and Content. In the case of designated sectors, only
locally produced goods, services or works or locally manufactured goods, with a stipulated
minimum threshold for local production and content will be considered. IDC reserves the
right at its sole discretion to set minimum thresholds for sectors which may not have been
declared as designated sectors by the dti in an effort to stimulate local production and
content where relevant.
Bidders are required to assess their product and /or service offering against the
designated sector lists as published by the Department of Trade and Industry (the dti) and
to ensure full compliance to the minimum local content threshold, if relevant, before
submitting its response to this tender. The dti’s latest list of designated sectors can be
accessed on: http://www.dti.gov.za/industrial_development/ip.jsp.
Page 9
12. Response Format (Returnable Schedules)
Bidders shall submit their bid responses in accordance with the response format specified
below (each schedule must be clearly marked):
12.1 Cover Page: (the cover page must clearly indicate the RFP reference number, bid
description and the bidder’s name)
12.2 Schedule 1:
12.2.1 Executive Summary (explaining how you understand the requirements of this
RFP and the summary of your proposed solution)
12.2.2 Annexure 1 of this RFP document (duly completed and signed)
12.3 Schedule 2
12.3.1 Valid Tax Clearance Certificate(s) (TCC) and / or proof of application as
endorsed by SARS and / or SARS issued tax verification pin code;
12.3.2 Originally certified copies of bidder’s CIPC company registration documents
listing all members with percentages, in case of a CC.
12.3.3 Copy of Board Resolution, duly certified;
12.3.4 Originally certified copy of ID document for the Company Representative
12.3.5 Annexure 2 of this RFP document (duly completed and signed);
12.3.6 Annexure 3 of this RFP document (duly completed and signed);
12.3.7 Annexure 4 of this RFP document (duly completed and signed);
12.3.8 Annexure 5 of this RFP document (duly completed and signed);
12.3.9 Annexure 6 of this RFP document (duly completed and signed);
12.3.10 Annexure 7 of this RFP document (duly completed and signed);
12.3.11 Response to Annexure 8: BEE Commitment Plan
12.3.12 Bidders must submit a B-BBEE verification certificate indicating the contribution
level of the bidding entity. For Exempted Micro Enterprises (EME) with an annual
revenue of less than R10 million and Qualifying Small Enterprises (QSE) with an
annual revenue of between R10 million and R50 million per annum, a sworn
affidavit confirming the annual total revenue and level of black ownership may be
submitted. Any misrepresentation in terms of the declaration constitutes a
criminal offence as set out in the B-BBEE Act as amended.
Note: If a bidder is a Consortium, Joint Venture or Prime Contractor with
Subcontractor(s), the documents listed above must be submitted for each
Consortium/ JV member or Prime Contractor and Subcontractor(s).
12.3.13 Annexure 9 of this RFP document (duly completed and signed, if relevant);
12.3.14 Statement of Financial Position of the Bidder: Latest Audited Financial
Statements (where applicable in terms of the Company’s Act) and/or
independently reviewed financial statements and/or Cashflow Budget for new
entities with no financial records.
12.3.15 Copy of Joint Venture/ Consortium/ Subcontracting Agreement duly signed by all
parties (if applicable)
Page 10
12.4 Schedule 3:
12.4.1 Response to Section 3 of this document, in line with the format indicated in this
RFP document.
12.4.2 Annexure 7 of this RFP document, duly completed and signed
12.5 Schedule 4: Price Proposal (response to Section 4 of this RFP document) (Must be
submitted in a separate envelope within the sealed envelope of the bid)
12.6 One (1) CD with all Schedules listed above, also included in the sealed envelope
of the bid
Page 11
13. Evaluation Criteria and Weightings
Bids shall be evaluated in terms of the following process:
13.1 Phase 1: Initial Screening Process: During this phase, bid responses will be reviewed
for purposes of assessing compliance with RFP requirements including the general bid
conditions and also the Specific Conditions of Bid, which requirements include the
following:
Submission of a valid Tax Clearance Certificate as referenced in 12.3.1
above
Submission of Company Registration Forms as referenced 12.3.2 above
Submission of ID copy for the Company Representative as referenced in
12.3.4 above
BEE Status Certification as referenced in 12.3.12 above
Completion of all Standard Bidding Documents and other requirements, as
reflected in this RFP, which covers the following:
Section 3: Statement of compliance with the Functional Evaluation
Criteria for this RFP
Section 4: Cost Proposal and Price Declaration Form
Annexure 1: Acceptance of Bid Conditions
Annexure 2: Tax Compliance Requirements
Annexure 3: Supply Chain Management Questionnaire
Annexure 4: Declaration of Interest
Annexure 5: Certificate of Independent Bid Determination
Annexure 6: Shareholders’ Information/ Group Structure
Annexure 7: Bidders Experience & Project Team
Annexure 8: BEE Commitment Plan
Annexure 9: Disclosure Statement
Annexure 10: Local Content Declaration (If Relevant)
Failure to comply with the requirements assessed in Phase 1 (compliance), may lead to
disqualification of bids.
13.2 Phase 2: Technical/ Functionality Evaluation
Bid responses will be evaluated in accordance with the Functional criteria as follows:
Page 12
13.2.1 Other Functional/ Technical Requirements
The other functional evaluation will be conducted in 2 stages as follows:
Stage 1: Paper based evaluation where the following criteria (set out in more detail
in section 3 of this RFP document) and the associated weightings will be
applicable:
ELEMENT WEIGHT
System Functionality 25
Reporting 15
System Support and availability 10
Training 5
Experience of bidder and team 10
Implementation Plan 5
Practical/System demonstration (Stage 2) 30
TOTAL 100
All bidders that meet the mandatory requirement will advance to the paper based evaluation
(Stage 1) and bidders that score 49 points out of 70 points will advance to the systems
demonstrations phase (Stage 2) where Practical / System demonstration evaluations as part of the
Functionality assessment / Evaluation will be conducted.
The minimum qualifying score for functionality is 70% where the paper based score will account
for 70 points and systems demonstrations, 30 points. All bids that fail to achieve the minimum
qualifying score on Functionality shall not be considered for further evaluation on Price and BEE.
13.3 Phase 3: Preference Point System
All bids that achieve the minimum qualifying score for Functionality (acceptable bids)
will be evaluated further in terms of the preference point system, as follows:
CRITERIA POINTS
Price 80
B-BBEE 20
TOTAL 100 points
14. Promotion of Emerging Black owned Service Providers
It is the IDC’s objective to promote transformation across all industries and/ or sectors of
the South African economy and as such, bidders are encouraged to partner with a black
owned entity (being 50%+1 black owned and controlled). Such partnership may include
the formation of a Joint Venture and/ or subcontracting agreement etc., where a portion of
the work under this tender would be undertaken by black owned entities. To give effect to
this requirement, bidders are required to submit a partnership / subcontracting proposal
detailing the portion of work to be outsourced, level of involvement of the black owned
partner and where relevant, submit a consolidated B-BBEE scorecard in-line with the
Page 13
provisions of the PPPFA Regulations which will be considered as part of the B-BBEE
scoring listed in 13.3.
SECTION 3: FUNCTIONAL REQUIREMENTS SPECIFICATION
Page 14
SECTION 3: FUNCTIONAL REQUIREMENTS SPECIFICATION
1. Special instructions to bidders
1.1 Should a bidder have reason to believe that the Functional Requirements are not
open/fair and/or are written for a particular service provider; the bidder must notify IDC
Procurement within five (5) days after publication of the RFP.
1.2 Bidders shall provide full and accurate answers to the questions posed in this RFP
document, and, where required explicitly state either “Comply/Not Comply” regarding
compliance with the requirements. Bidders must substantiate their response to all
questions, including full details on how their proposal/solution will address specific
functional/ technical requirements; failure to substantiate may lead to the bidder being
disqualified. All documents as indicated must be supplied as part of the bid response.
1.3 Failure to comply with Mandatory Requirements may lead to the bidder being
disqualified.
2. Background Information
2.1 The Risk Management & ALM Department facilitates the Asset and Liability Committee (ALCO) process as defined in the ALCO charter. In carrying out the ALCO process, the ALM solution is used to measure, monitor and report the IDC’s liquidity and market risk exposures. d, the IDC is seeking a solution for the ALM function, which is used to manage liquidity for both Static and Dynamic gap reporting, interest rate risk, prepare multi-year cash flow forecasts, produce information used in risk management stress testing models as well as for efficient reporting.
2.2 At present, the IDC’s Core Solution integrate with the SAP, and should interface with
other external market databases. Ultimately, the database for ALM Solution should be compatible/interface to SAP.
3. IDC Server Environment
The IDC campus runs on a virtual platform.
4. Scope of Work
The scope of project envisages a complete turnkey solution which includes supply,
installation, customization, configuration, support and other components required for an
Asset and Liability Management Tool ("ALM Solution"). This would also envisage
parameterization, extraction of historical data, verifying data quality, migrating data, user
acceptance testing, documentation, trainings, knowledge transfer and support. The
solution offered could either be on premise or cloud based, open platform and support
data transfer and consolidation from both the networked and standalone systems. The
modules should be as follows:
ALM Core Functionalities
4.1 Liquidity Risk Management
Page 15
Provision of Static and Dynamic Liquidity GAP Reports per currency (Different product types such as fixed, floating, Non-maturing, Non-rate sensitive etc.)
Cashflow projections (Cashflow balance sheet)
Liquidity Cover Ratios per currency
Structural liquidity Mismatch (equivalence of NSFR in the IDC environment)
Stress Scenarios
4.2 Interest Rate Risk Management
Both static and dynamic Repricing Balance Sheet Gap reports per currency
Dynamic Net Interest Income (NII) Simulation report
Key Rate Duration Reports (Hedging decisions)
Capacity to accommodate synthetic assets (Interest Rate Derivatives such as swaps, etc.)
Economic Value of Equity (EVE) Sensitivity Reports (Capability of evaluating EVE- At-Risk using different yield curve scenarios)
4.3 Foreign Exchange Risk Management
Currency mismatch balance sheet report
Forecasting potential cash flows from foreign currency forward positions;
Cost of hedging in relation to loan spreads
VaR for hedging instruments
4.4 Equity Price Risk Management
Management of market risk in the Banking book (in line with the IDC’s business structure) using VaR methodology (i.e. parametric)
Perform back testing, stress testing, calculate specific risk VaR, component VaR to measure concentration risk and Incremental VaR requirements as per Basel III guidelines
4.5 Reporting
Reports and various information and reporting essential for the Asset Liability Management Committee (ALCO) should be delivered in the form of standard or customized reports, as well as web-based dashboards. The reports should provide a granular view of risk and facilitate quicker decision-making process
Additional functionalities
Funds Transfer Pricing (FTP)
The systems should have the capability to incorporate liquidity costs, benefits and risks in the internal pricing and performance measurement as well as separate interest rate effects from corporation performance to uncover what is impacting the corporation (i.e. identify margins cost of hedging financial risks).
Page 16
5. Project Timelines
The bidder(s) will be required to start immediately after contracting to implement the
required solution, and provide maintenance and support for a period of three (3) years.
The IDC reserves the right to extend the term of appointment for a longer period but not
beyond five (5) years. The preferred implementation period is primarily 3 (three) months,
however, reasonable time frame proposals may be considered.
6. Glossary
ALCO Asset Liability Management Committee
ALM Asset and Liability Management Tool
NSFR Net Stable funding Ratio
NII Net Interest Income
EVE Economic Value of Equity
VaR Value at Risk
FTP Funds Transfer Pricing
ERP Enterprise Resource Planning
SAP Systems Applications and Products
7. Technical Evaluation Criteria
7.1 Mandatory Technical Requirements
The service provider must indicate their compliance/ non-compliance to the
following requirements and to substantiate as required. The bidder must respond in
the format below, where additional information is provided/ attached somewhere
else; such information must be clearly referenced.
7.1.1 SAP Data Exchange Comply Not
Comply
The IDC utilises SAP as its ERP system. The proposed solution should
therefore be able to import data from SAP to optimise the solution’s
functionality.
Please indicate how this will be done and provide the file format /
database which your system can accommodate.
Substantiate / Comments
Page 17
7.1.2 Connection to External Market Databases Comply Not
Comply
The solution should be able to connect with external market databases,
at a minimum Reuters and Bloomberg.
Substantiate / Comments
7.1.3 Commercial availability Comply Not
Comply
The solution should be commercially available and the bidder should
provide the latest software version, including a roadmap on future
updates.
Substantiate / Comments
Page 18
7.2 Phase 2: Other Technical and Functionality Evaluation
The bidder must indicate its compliance / non-compliance to the requirements and
should substantiate its response in the space provided below. If more space is
required to justify compliance, please ensure that the substantiation is clearly cross
-referenced to the relevant requirement.
7.2.1 System Functionality:
7.2.1.1 Liquidity Risk Management Comply Partially
Comply
Not
Comply
The proposed system solution should be able to support the
following:
Static and Dynamic Liquidity GAP Reports per currency (Different product types such as fixed, floating, Non-maturing, Non-rate sensitive etc.)
Cashflow projections (Cashflow balance sheet)
Liquidity Cover Ratios per currency
Structural liquidity Mismatch (equivalence of NSFR in the IDC environment)
Stress Scenarios
Bidder must substantiate how the tool will achieve all the
requirements as listed above. Through the provision of
detailed information, sample reports and screenshots
from the system.
Substantiate / Comments
Page 19
7.2.1.2 Interest Rate Risk Management Comply Partially
Comply
Not
Comply
The proposed system solution should be had the ability to
perform;
Both static and dynamic Repricing Balance Sheet Gap reports per currency
Dynamic Net Interest Income (NII) Simulation report
Key Rate Duration Reports (Hedging decisions)
Capacity to accommodate synthetic assets (Interest Rate Derivatives such as swaps, etc.)
Economic Value of Equity (EVE) Sensitivity Reports (Capability of evaluating EVE- At-Risk using different yield curve scenarios)
Bidder must substantiate how the tool will achieve all the
requirements as listed above. Through the provision of
detailed information, sample reports and screenshots
from the system.
Substantiate / Comments
7.2.1.3 Currency Risk Management Comply Partially
Comply
Not
Comply
The proposed tool should have the ability to perform;
Currency mismatch balance sheet report
Forecasting potential cash flows from foreign currency forward positions;
Cost of hedging in relation to loan spreads
VaR for hedging instruments
Bidder must substantiate how the tool will achieve all the
requirements as listed above. Through the provision of
detailed information, sample reports and screenshots
from the system.
Substantiate / Comments
Page 20
7.2.1.4 Equity Price Risk Management Comply Partially
Comply
Not
Comply
The proposed tool must be able to do;
Management of market risk in the Banking book (in line with the IDC’s business structure) using VaR methodology (i.e. parametric)
Perform back testing, stress testing, calculate specific risk VaR, component VaR to measure concentration risk and Incremental VaR requirements as per Basel III guidelines
Bidder must substantiate how the tool will achieve all the
requirements as listed above. Through the provision of
detailed information, sample reports and screenshots
from the system.
Substantiate / Comments
7.2.1.5 Funds Transfer Pricing Comply Partially
Comply
Not
Comply
The proposed system should have the capability to
incorporate liquidity costs, benefits and risks in the internal
pricing and performance measurement as well as separate
interest rate effects from corporation performance to uncover
what is impacting the corporation (i.e. Identify margins cost of
hedging financial risks)
Bidder must indicate how the tool will achieve this
requirement.
Substantiate / Comments
Page 21
7.2.2 Reporting Comply Partially
Comply
Not
Comply
The proposed platform system should provide reports and
various information and reporting essential for the Asset
Liability Management Committee (ALCO) and should be
delivered in the form of standard or customized reports, as
well as web-based dashboards. The reports should provide a
granular view of risk and facilitate quicker decision-making
process.
Bidder must indicate how the tool will achieve this
requirement.
Substantiate / Comments
7.2.3 System availability and support Comply Partially
Comply
Not
Comply
The bidder must provide system support for the period of the
contract after implementation in-line with the Service Level
Agreement which will be implemented.
The system must be able to have an up-time of at least
99.9%.
The bidder must provide a support proposal which must
ensure the required system up-time of 99,9% which will
be assessed on the appropriateness and applicability to
the IDC’s operating environment.
Substantiate / Comments
Page 22
7.2.4 Training Comply Partially
Comply
Not
Comply
The bidder should be able to provide the following training;
User training for all authorised system users (up to
10 users). The training should be a comprehensive
once off workshop (up to 5 working days).
Ad-hoc training may be required at the IDC’s
request (at an hourly predetermined rate).
Functional IT capacitation for two (2) IDC’s in-house
infrastructural and system specialists.
All training sessions should be accompanied by
detailed user-manuals.
Bidder must provide a training proposal that cover all
the above requirements.
Substantiate / Comments
Page 23
7.2.5 Experience of bidder and Team
7.2.5.1 Bidder’s Experience Comply Partially
Comply
Not
Comply
The bidder must demonstrate relevant experience in
implementing or maintaining an ALM Solution in the DFI
space/ financial institution.
The bidder must provide a minimum of three (3) relevant
contactable references where the bidder has successfully
implemented or maintained an ALM Tool in the past 5 (five)
years. Please refer to Table (a) of Annexure 7 of this
document for the format in which the required information
must be provided.
Substantiate / Comments
7.2.5.2 Qualifications And Skills Of Key Personnel Comply Partially
Comply
Not
Comply
The key personnel of the proposed team to implement, support
and training on the proposed tool must have relevant
qualifications, skills and experience.
The bidders must submit, as part of its proposal, the following:
The structure and composition of the proposed team,
clearly outlining the main disciplines/ specialties of this
project and the key personnel responsible for each
specialty. Please refer to Table (b) Annexure 7 of this
document for the format in which the required
information must be provided.
CVs of the key personnel; and the CVs must clearly
highlight qualifications, areas of experience/
competence relevant to the tasks and objectives of this
project as outlined above. The personnel must have a
minimum of 5 (five) years within the ALM systems
environment.
Substantiate / Comments
Page 24
7.2.6 IMPLEMENTATION PLAN Comply Partially
Comply
Not
Comply
The bidder must provide a detailed implementation plan,
including documentation of the process flow and associated
timelines linked to key deliverables. A three (3) month
implementation period is preferred, however reasonable time
frame proposals may be considered.
Substantiate / Comments
Phase 3: System Demonstrations
7.3 Demonstrations (Practical Evaluation) Maximum Points
Usability of the tool (ease of use/ user guide function) 5
Transparency (audit trail/ease of the process flow and detailed
workings) 2.5
Administrator/ super user interface function (ability to control
system access) 2.5
Providing functionality for Liquidity Risk Management as
stipulated in 6.2.3 above
5
Providing functionality for Interest Rate Risk Management as
stipulated in 6.2.4 above
4
Providing functionality for Currency Risk Management as
stipulated in 6.2.5 above
2.5
Providing functionality for Equity Price Risk Management as
stipulated in 6.2.6 above
2.5
Providing functionality for Funds Transfer Pricing as discussed in 6.2.7 above
1
Incorporate flexibility to reporting writing, standard or customized
reports, as well as web-based dashboards
1.5
Workflow diagrams. 1
Product and Currency Coverage 1
Data Management 1.5
Page 25
SECTION 4: PRICE PROPOSAL
Page 26
SECTION 4: Cost Proposal
1 NOTE: All prices must be VAT exclusive and must be quoted in South African Rand (ZAR).
2 Are the rates quoted firm for the full period of the contract?
Important: If not firm for the full period, provide details of the basis on which price adjustments shall be
applied e.g. CPI etc.
3 All additional costs associated the bidder’s offer must be clearly specified and included in the Total
Bid Price.
4
Is the proposed bid price linked to the exchange rate? Yes No
If yes, the bidder must indicate CLEARLY which portion of the bid price is linked to the exchange rate:
6
Payments will be linked to specified deliverables after such deliverables have been approved by the IDC. Payments will be made within 30 days from date of invoice.
Comply Not Comply
7
The IDC reserves the right to consider the guidelines on consultancy rates as set out in the National Treasury Instruction 01 of 2013/2014: Cost Containment Measures which took effect from 01 January 2014, where
relevant.
The bidder must indicate if their proposed rates are in line with the provisions of the referenced National Treasury Instruction: Cost Containment Measures.
Comply Not Comply
Substantiate / Comments
YES NO
Page 27
8 COSTING MODEL
Table A: Software
Cost Elements
Cost per User License
ALM Solution (Corporate Software License Cost for up
to 5 users at the IDC on an annual basis)
Annual Software Maintenance
and Support
Year 1
Year 2
Year 3
Year 4
Year 5
Sub total (A) VAT Excl.
Note: The bidder must provide details of the proposed software licensing structure and specify
maintenance required for administration requirements.e.g. prime rate / country risk.
Table B: Supply and Implementation
Activities/Deliverable Implementation Cost
(VAT Excl.)
Supply and Implementation of a complete turnkey solution which includes,
installation, customization, configuration, support and other components
required for an Asset and Liability Management Tool ("ALM Solution"). This
would also include parameterization, extraction of historical data, verifying
data quality, migrating data, user acceptance testing, documentation,
trainings, knowledge transfer and support
Bidder is required to provide a detailed cost breakdown
Bidder must specify the brand, type and name of ALM solution
proposed
Disbursements
Sub total (B) VAT Excl.
Page 28
Table C: System availability and support
Activities/Deliverable Resource(s)
Rate/Hour
per
resource
Number
of hours
Cost
(VAT Excl.)
Provide support for the period of the
contract after implementation, per the
Service Level Agreement.
Note: The system must be able to
have an up-time of at least 99.9%.
Remote Online
Support
20 hrs
Remote – Telephonic
Support 20 hrs
On-site support 20 hrs
Sub total (C) VAT Excl.
The IDC requires bidders to provide a bucket of 60 hours for online, remote and on-site support which
may be required on an as needed basis. The bidder is required to provide experienced and qualified
resources to provide the required support and indicate the proposed hourly rates per resource.
Table C: Training
Activities/Deliverable Resource(s) Rate/Hour per
resource
Number
of hours
Cost
(VAT Excl.)
User training for all authorised
system users (up to 10 users).
Ad-hoc training may be required at
the IDC’s request (at an hourly
predetermined rate).
25hrs
Functional IT capacitation for two (2)
IDC’s in-house infrastructural and
system specialists.
25hrs
Sub total (C) VAT Excl.
Table D: Training Material
Activities/Deliverable Unit price Number
of units
Cost
(VAT Excl.)
All training sessions should be accompanied by detailed
user-manuals.
10
Sub total (D) VAT Excl.
Total Bid Price (A+B+C+D) VAT Excl.)
Page 29
Notes on pricing:
Disbursements (incidental expenses other than professional fees e.g. travel and accommodation,
printing costs, venue hire, and equipment hire etc.) must be clearly defined, outlining all
assumptions. It is of utmost importance to submit clear and comprehensive cost proposals to
allow the IDC to fairly compare bid price / cost proposals. If there is no additional fee envisaged
for Disbursements, then the bidder must clearly indicate “No Charge / Free of Charge”. Failure to
clearly indicate this, would result in IDC penalising your bid response by taking the cost of the
highest bidder and adding 50% thereto and apply this rate for purposes of price comparisons.
Bidders are therefore requested to respond clearly and comprehensively on this aspect of their
bid response.
The bidder must provide a detailed breakdown of the Disbursements as follows:
Cost Element Cost (VAT Excl.)
Total Disbursements
9 SUMMARY OF THE PROPOSAL
DESCRITPION BIDDER’S PROPOSAL
Number of resources (personnel)
Project implementation duration (in hours)
Project implementation duration (in months)
Page 30
Price Declaration Form
Dear Sir,
Having read through and examined the Bid Document, Tender no. T52/11/19, the General Conditions,
and all other Annexures to the RFP Document, we offer for the Design, Development Implementation,
Support and Maintenance of an Asset and Liability Management (ALM) Tool (“ALM Solution”) to the IDC
at the following total amount.
R......................................................................................................................... (Excluding VAT)
In words
R........................................................................................................................ (Excluding VAT)
We confirm that this price covers all activities associated with the service, as called for in the RFP
document. We confirm that IDC will incur no additional costs whatsoever, other than in respect of VAT,
over and above this amount in connection with the provision of this service.
We undertake to hold this offer open for acceptance for a period of 120 days from the date of submission
of offers. We further undertake that upon final acceptance of our offer, we will commence with the
provision of the required service when required to do so by the IDC.
We understand that you are not bound to accept the lowest or any offer, and that we must bear all costs
which we have incurred in connection with preparing and submitting this bid.
We hereby undertake for the period during which this bid remains open for acceptance, not to divulge to
any persons, other than the persons to whom the bid is submitted, any information relating to the
submission of this bid or the details therein except where such is necessary for the submission of this bid.
SIGNED DATE
(Print name of signatory)
Designation
FOR AND ON BEHALF OF: COMPANY NAME
Tel No
Fax No
Cell No
Page 31
SECTION 5: ANNEXURES
Industrial Development Corporation
Page 32
Annexure 1: Acceptance of Bid Conditions and Bidder’s Details
Request for Proposal No:
Name of Bidder:
Authorised signatory:
Name of Authorised
Signatory
Position of Authorised
Signatory
By signing above the bidder hereby accept full responsibility for the proper execution and fulfilment of all
obligations and conditions devolving on him/her under this RFP.
[Note to the Bidder: The Bidder must complete all relevant information set out below.]
CENTRAL SUPPLIER DATABASE (CSD) INFORMATION
Bidders are required to be registered on the Central Supplier Database (CSD) of National Treasury.
Failure to submit the requested information may lead to disqualification. Bidders are therefore
required to submit as part of this proposal both their CSD supplier number and CSD unique
registration reference numbers below:
Supplier Number
Unique registration reference number
BIDDING STRUCTURE
Indicate the type of Bidding Structure by marking with an ‘X’:
Individual Bidder
Joint Venture/ Consortium
Prime Contractor with Sub Contractors
Other
REQUIRED INFORMATION
If Individual Bidder:
Name of Company
Registration Number
Vat registration Number
Contact Person
Telephone Number
Cellphone Number
Fax Number
Page 33
If Individual Bidder:
Email address
Postal Address
Physical Address
If Joint Venture or Consortium, indicate the following for each partner:
Partner 1
Name of Company
Registration Number
Vat registration Number
Contact Person
Telephone Number
Cellphone Number
Fax Number
Email address
Postal Address
Physical Address
Scope of work and the value as a % of the total value of the contract
Partner 2
Name of Company
Registration Number
Vat registration Number
Contact Person
Telephone Number
Cellphone Number
Fax Number
Email address
Postal Address
Physical Address
Scope of work and the value as a % of the total value of the contract
Page 34
If bidder is a Prime Contractor using Sub-contractors, indicate the following:
Prime Contractor
Name of Company
Registration Number
Vat registration Number
Contact Person
Telephone Number
Cellphone Number
Fax Number
Email address
Postal Address
Physical Address
Sub contractors
Name of Company
Company Registration Number
Vat registration Number
Contact Person
Telephone Number
Cellphone Number
Fax Number
Email address
Postal Address
Physical Address
Subcontracted work as a % of the total value of the
contract
Page 35
Annexure 2: Tax Compliance Requirements
1. TAX COMPLIANCE REQUIREMENTS
1.1 BIDDERS MUST ENSURE COMPLIANCE WITH THEIR TAX OBLIGATIONS.
1.2 BIDDERS ARE REQUIRED TO SUBMIT THEIR UNIQUE PERSONAL IDENTIFICATION NUMBER (PIN) ISSUED BY SARS TO ENABLE THE ORGAN OF STATE TO VIEW THE TAXPAYER’S PROFILE AND TAX STATUS.
1.3 APPLICATION FOR TAX COMPLIANCE STATUS (TCS) OR PIN MAY ALSO BE MADE VIA E-FILING. IN ORDER TO USE THIS PROVISION, TAXPAYERS WILL NEED TO REGISTER WITH SARS AS E-FILERS THROUGH THE WEBSITE WWW.SARS.GOV.ZA.
1.4 BIDDERS MAY ALSO SUBMIT A PRINTED TCS TOGETHER WITH THE BID.
1.5 IN BIDS WHERE CONSORTIA / JOINT VENTURES / SUB-CONTRACTORS ARE INVOLVED, EACH PARTY MUST SUBMIT A SEPARATE PROOF OF TCS / PIN / CSD NUMBER.
1.6 WHERE NO TCS IS AVAILABLE BUT THE BIDDER IS REGISTERED ON THE CENTRAL SUPPLIER DATABASE (CSD), A CSD NUMBER MUST BE PROVIDED.
2. QUESTIONNAIRE TO BIDDING FOREIGN SUPPLIERS 2.1 IS THE BIDDER A RESIDENT OF THE REPUBLIC OF SOUTH AFRICA (RSA)? YES NO
2.2 DOES THE BIDDER HAVE A BRANCH IN THE RSA? YES NO
2.3 DOES THE BIDDER HAVE A PERMANENT ESTABLISHMENT IN THE RSA? YES NO
2.4 DOES THE BIDDER HAVE ANY SOURCE OF INCOME IN THE RSA? YES NO
IF THE ANSWER IS “NO” TO ALL OF THE ABOVE, THEN, IT IS NOT A REQUIREMENT TO OBTAIN A TAX COMPLIANCE STATUS / TAX COMPLIANCE SYSTEM PIN CODE FROM THE SOUTH AFRICAN REVENUE SERVICE (SARS) AND IF NOT REGISTER AS PER 1.3 ABOVE.
SUPPLIER COMPLIANCE STATUS
TAX COMPLIANCE SYSTEM PIN:
- 36 -
Annexure 3: Supply chain management practices questionnaire
Request for Proposal No:
Name of Bidder:
Authorised signatory:
[Note to the Respondent: The Respondent must complete the information set out below. If the Respondent
requires more space than is provided below it must prepare a document in substantially the same format setting
out all the information referred to below and return it with Returnable Schedule 2.]
The bidder must complete the following questionnaire.
Bidder’s past supply chain management practices:
Item Question Yes No
3.1 Is the Bidder or any of its directors listed on the South African National
Treasury’s database as companies or persons prohibited from doing business
with the public sector?
(Companies or persons who are listed on this database were informed in
writing of this restriction by the South African National Treasury after the audi
alteram partem rule was applied).
Yes
No
If so, provide particulars:
3.2 Is the Bidder or any of its directors listed on the Register for Bid Defaulters in
terms of section 29 of the Prevention and Combating of Corrupt Activities Act
No 12 of 2004?
To access this Register enter the National Treasury’s website, www.treasury.gov.za , click on the icon “Register for Bid Defaulters” or submit your written request for a hard copy of the Register to facsimile number +27123265445.
Yes
No
If so, provide particulars:
3.3 Was the Bidder or any of its directors convicted by a court of law (including a
court outside of the Republic of South Africa) for fraud or corruption during the
past five years?
Yes
No
- 37 -
Page 37
Item Question Yes No
If so, provide particulars:
3.4 Does the Bidder relate to any IDC employee or part of IDC current or past
staff (employee) establishment?
Yes
No
If so, provide particulars:
3.5 Was any contract between the Bidder and any organ of state (within the Republic of South
Africa or within any foreign territory) terminated during the past five years on account of
failure to perform on or comply with the contract?
If so, provide particulars:
I, _____________________________ (print name) hereby certify that the information, facts and representations
are correct and that I am duly authorized to sign on behalf of the company.
Name of Company: __________________________________________________________
Company Registration Number: _________________________________________________
Company VAT Registration Number: _____________________________________________
________________________________
Signature
________________________________
Date
- 38 -
Page 38
Annexure 4: Declaration of Interest
1. Any legal person, including persons employed by the state¹, or persons having a kinship with persons
employed by the state, including a blood relationship, may make an offer or offers in terms of this
invitation to bid (includes a price quotation, advertised competitive bid, limited bid or proposal). In view
of possible allegations of favouritism, should the resulting bid, or part thereof, be awarded to persons
employed by the state, or to persons connected with or related to them, it is required that the bidder or
his/her authorised representative declare his/her position in relation to the evaluating/adjudicating
authority where-
- the bidder is employed by the state; and/or
- the legal person on whose behalf the bidding document is signed, has a relationship with
persons/a person who are/is involved in the evaluation and or adjudication of the bid(s), or where
it is known that such a relationship exists between the person or persons for or on whose behalf
the declarant acts and persons who are involved with the evaluation and or adjudication of the
bid.
2. In order to give effect to the above, the following questionnaire must be completed and
submitted with the bid.
2.1 Full Name of bidder or his or her representative: …………………………………………………….
2.2 Identity Number:………………………………………………………………………………………
2.3 Position occupied in the Company (director, trustee, shareholder²): ………………………………..
2.4 Company Registration Number: ………………………………………………………………..…….
2.5 Tax Reference Number: …………………………………………………………………….………
2.6 VAT Registration Number: ………………………………………………………………....
2.6.1 The names of all directors / trustees / shareholders / members, their individual identity numbers, tax
reference numbers and, if applicable, employee / persal numbers must be indicated in paragraph 3
below.
¹“State” means –
(a) any national or provincial department, national or provincial public entity or constitutional institution
within the meaning of the Public Finance Management Act, 1999 (Act No. 1 of 1999);
(b) any municipality or municipal entity;
(c) provincial legislature;
- 39 -
Page 39
(d) national Assembly or the national Council of provinces; or
(e) Parliament.
²”Shareholder” means a person who owns shares in the company and is actively involved in the management of
the enterprise or business and exercises control over the enterprise.
2.7 Are you or any person connected with the bidder YES / NO
presently employed by the state?
2.7.1 If so, furnish the following particulars:
Name of person / director / trustee / shareholder/ member: ……....………………………………
Name of state institution at which you or the person
connected to the bidder is employed :
………………………………………
Position occupied in the state institution:
………………………………………
Any other particulars:
………………………………………………………………
………………………………………………………………
………………………………………………………………
2.7.2 If you are presently employed by the state, did you obtain YES / NO
the appropriate authority to undertake remunerative
work outside employment in the public sector?
2.7.2.1 If yes, did you attached proof of such authority to the bid YES / NO
document?
(Note: Failure to submit proof of such authority, where
applicable, may result in the disqualification of the bid.
2.7.2.2 If no, furnish reasons for non-submission of such proof:
…………………………………………………………………….
…………………………………………………………………….
…………………………………………………………………….
2.8 Did you or your spouse, or any of the company’s directors / YES / NO
- 40 -
Page 40
trustees / shareholders / members or their spouses conduct
business with the state in the previous twelve months?
2.8.1 If so, furnish particulars:
…………………………………………………………………..
…………………………………………………………………..
…………………………………………………………………...
2.9 Do you, or any person connected with the bidder, have YES / NO
any relationship (family, friend, other) with a person
employed by the state and who may be involved with
the evaluation and or adjudication of this bid?
2.9.1 If so, furnish particulars.
……………………………………………………………...
…………………………………………………………..….
………………………………………………………………
2.10 Are you, or any person connected with the bidder (i.e. shareholder, partner, YES / NO
director etc.), aware of any relationship (family, friend, other) between any other
bidder or any other company and any person employed by the IDC or the dti
who may be involved with the evaluation and or adjudication of this bid?
2.10.1 If so, furnish particulars.
………………………………………………………………
………………………………………………………………
………………………………………………………………
2.11 Do you or any of the directors / trustees / shareholders / members YES/NO
of the company have any interest in any other company whether or not
they are bidding for this contract? The IDC reserves the right to undertake
further background checks on any other company where partners, shareholders
or any interested party of the bidder may be involved in and to consider any
findings in this regard as part of its vetting processes.
2.11.1 If so, furnish particulars:
…………………………………………………………………………….
…………………………………………………………………………….
…………………………………………………………………………….
- 41 -
Page 41
3 Full details of directors / trustees / members / shareholders.
Full Name Identity Number Personal Tax
Reference Number
State Employee
Number / Persal
Number
1. DECLARATION
I, THE UNDERSIGNED (NAME)………………………………………………………………………
CERTIFY THAT THE INFORMATION FURNISHED IN PARAGRAPHS 2 and 3 ABOVE IS CORRECT. I
ACCEPT THAT IDC MAY REJECT THE BID OR ACT AGAINST ME SHOULD THIS DECLARATION
PROVE TO BE FALSE.
………………………………….. ..……………………………………………
Signature Date
…………………………………. ………………………………………………
Position Name of bidder
- 42 -
Page 42
Annexure 5: Certificate of Independent Bid Determination
SBD 9
CERTIFICATE OF INDEPENDENT BID DETERMINATION
1 This Standard Bidding Document (SBD) must form part of all bids1 invited.
2 Section 4 (1) (b) (iii) of the Competition Act No. 89 of 1998, as amended, prohibits an agreement
between, or concerted practice by, firms, or a decision by an association of firms, if it is between parties
in a horizontal relationship and if it involves collusive bidding (or bid rigging).2 Collusive bidding is a pe
se prohibition meaning that it cannot be justified under any grounds.
3 Treasury Regulation 16A9 prescribes that accounting officers and accounting authorities must take all
reasonable steps to prevent abuse of the supply chain management system and authorizes accounting
officers and accounting authorities to:
a. disregard the bid of any bidder if that bidder, or any of its directors have abused the institution’s
supply chain management system and or committed fraud or any other improper conduct in
relation to such system.
b. cancel a contract awarded to a supplier of goods and services if the supplier committed any
corrupt or fraudulent act during the bidding process or the execution of that contract.
4 This SBD serves as a certificate of declaration that would be used by institutions to ensure that, when
bids are considered, reasonable steps are taken to prevent any form of bid-rigging.
5 In order to give effect to the above, the attached Certificate of Bid Determination (SBD 9) must be
completed and submitted with the bid:
1 Includes price quotations, advertised competitive bids, limited bids and proposals.
2 Bid rigging (or collusive bidding) occurs when businesses, that would otherwise be expected to compete, secretly conspire to
raise prices or lower the quality of goods and / or services for purchasers who wish to acquire goods and / or services through a
bidding process. Bid rigging is, therefore, an agreement between competitors not to compete.
- 43 -
Page 43
CERTIFICATE OF INDEPENDENT BID DETERMINATION
I, the undersigned, in submitting the accompanying bid:
________________________________________________________________________
(Bid Number and Description)
in response to the invitation for the bid made by:
______________________________________________________________________________
(Name of Institution)
do hereby make the following statements that I certify to be true and complete in every respect:
I certify, on behalf of:_______________________________________________________that:
(Name of Bidder)
1. I have read and I understand the contents of this Certificate;
2. I understand that the accompanying bid will be disqualified if this Certificate is found not to be true and
complete in every respect;
3. I am authorized by the bidder to sign this Certificate, and to submit the accompanying bid, on behalf of the
bidder;
4. Each person whose signature appears on the accompanying bid has been authorized by the bidder to
determine the terms of, and to sign the bid, on behalf of the bidder;
5. For the purposes of this Certificate and the accompanying bid, I understand that the word “competitor”
shall include any individual or organization, other than the bidder, whether or not affiliated with the bidder,
who:
(a) has been requested to submit a bid in response to this bid invitation;
(b) could potentially submit a bid in response to this bid invitation, based on their
qualifications, abilities or experience; and
(c) provides the same goods and services as the bidder and/or is in the same line of
business as the bidder
6. The bidder has arrived at the accompanying bid independently from, and without consultation,
communication, agreement or arrangement with any competitor. However, communication between
partners in a joint venture or consortium3 will not be construed as collusive bidding.
7. In particular, without limiting the generality of paragraphs 6 above, there has been no consultation,
communication, agreement or arrangement with any competitor regarding:
3 Joint venture or Consortium means an association of persons for the purpose of combining their expertise, property, capital,
efforts, skill and knowledge in an activity for the execution of a contract.
- 44 -
Page 44
(a) prices;
(b) geographical area where product or service will be rendered (market allocation)
(c) methods, factors or formulas used to calculate prices;
(d) the intention or decision to submit or not to submit, a bid;
(e) the submission of a bid which does not meet the specifications and conditions of the bid;
or
(f) bidding with the intention not to win the bid.
8. In addition, there have been no consultations, communications, agreements or arrangements with any
competitor regarding the quality, quantity, specifications and conditions or delivery particulars of the
products or services to which this bid invitation relates.
9. The terms of the accompanying bid have not been, and will not be, disclosed by the bidder, directly or
indirectly, to any competitor, prior to the date and time of the official bid opening or of the awarding of the
contract.
10. I am aware that, in addition and without prejudice to any other remedy provided to combat any restrictive
practices related to bids and contracts, bids that are suspicious will be reported to the Competition
Commission for investigation and possible imposition of administrative penalties in terms of section 59 of
the Competition Act No 89 of 1998 and or may be reported to the National Prosecuting Authority (NPA)
for criminal investigation and or may be restricted from conducting business with the public sector for a
period not exceeding ten (10) years in terms of the Prevention and Combating of Corrupt Activities Act
No 12 of 2004 or any other applicable legislation.
………………………………………………… …………………………………
Signature Date
…………………………………………………. …………………………………
Position Name of Bidder
- 45 -
Page 45
Annexure 6: Shareholders and Directors Information
[Note to the bidder: the bidder must complete the information set out below. If the bidder requires more space
than is provided below it must prepare a document in substantially the same format setting out all the information
referred to below and return it with Returnable Schedule 2.]
6.1 Shareholders/ Members
Name of the shareholder ID Number Race Gender % shares
Note: The bidder must also attach the detailed Company/ Group Structure where relevant.
6.2 Black Shareholders/ Members as per the B-BBEE Certificate
Name of the shareholder ID Number Race Gender % shares
Total Black Shareholding % as per the current and valid B-BBEE Certificate
- 46 -
Page 46
6.3 Directors
Name of the shareholder ID Number Race Gender
I, THE UNDERSIGNED (NAME)………………………………………………………………………
CERTIFY THAT THE INFORMATION FURNISHED ABOVE IS CORRECT.
………………………………….. ..……………………………………………
Signature Date
…………………………………. ………………………………………………
Position Name of bidder
- 47 -
Annexure 7: Response Format for Section 3
Bidder’s Experience and the proposed Project Team
Request for Proposal No:
Name of Bidder:
Authorised signatory:
[Note to the Bidder: The bidder must complete the information set out below in response to the requirements stated in Section 2 of this bid document. If the bidder requires
more space than is provided below it must prepare a document in substantially the same format setting out all the information referred to below and return it with this
Returnable Schedule 3.]
The bidder must provide the following information:
Table (a) Details of the bidder's current and experience in implementing or maintaining an ALM Solution in the DFI space/ financial institution.
. (Please refer to point 7.2.5.1 & 7.2.5.2 Section 3 of this RFP document):
Client’ Name and / or
industry / sector in
which client operates
Brief description of
scope of services
Project Cost
i.e. < R1 million
or > R 1 million
Project period
(Start and End Dates)
Description of service performed and
extent of Bidder's responsibilities
Name, title and telephone
contact of client
- 48 -
Page 48
Table (b) Details of the key personnel of the bidders’ proposed project team:
Name Position Role / Duties in this Project Relevant Project Experience
Project description, Client, Project period Project Cost
- 49 -
Annexure 8: BEE Commitment Plan
The IDC encourages existing vendors and prospective bidders to support the objectives of B-BBEE and
as far as possible strive to improve their B-BBEE contribution status. For bid evaluation purposes,
bidders are allocated points in terms of a preference point system based on the B-BBEE Contribution
Level status that is in accordance with a valid B-BBEE certificate.
Bidders are therefore required to submit a B-BBEE improvement plan in view of the new B-BBEE
Codes of Good Practice. Bidders must indicate the extent to which their ownership, management
control, employment equity, preferential procurement and enterprise development will be maintained or
improved over the contract period in the event that they are successful in this bid process.
- 50 -
Page 50
Annexure 9: Disclosure Statement
Disclosure Statement
In terms of the tender condition 8.6, which allows the IDC to conduct background checks on bidders and
its shareholders and directors, the IDC hereby requires bidders to provide the following additional
information:
9.1 The IDC considers the integrity of its appointed service providers to be of critical importance. The
IDC reserves the right to disqualify from further consideration, any bidder whose integrity, based
on past conduct (during the 5 years immediately preceding the bid submission date), it considers
questionable.
9.2 To this end, the IDC requires each bidder to include in its bid, a disclosure statement which
details the following (with sufficient information and supporting documentation for the IDC to make
its own assessment as to the materiality or seriousness of allegations regarding the bidder’s
integrity or conduct):
9.2.1 any criminal charges made against the bidder or any of its directors, shareholders or
management officials regarding their professional conduct;
9.2.2 any civil proceedings initiated against the bidder or any of its directors, shareholders or
management officials regarding their professional conduct; and
9.2.3 any other enquiry or similar proceedings initiated or threatened against the bidder or any
of its directors, shareholders or management officials regarding their professional
conduct.
9.3 Where the bidder is a consortium, the disclosure statement referred to in paragraph 9.2 above
must be made separately in respect of each consortium partner
9.4 In the event that the bidder’s circumstances change, after submission of its bid, in regard to any
matter referred to in paragraph 9.2 above or in regard to any matter referred to in its disclosure
statement, the bidder must submit a written notification to IDC indicating the nature and extent of
such changed circumstances.
9.5 The IDC reserves the right to seek such additional information from any bidder, in respect of the
disclosure statement referred to in paragraph 9.2 above, as it may, in its sole discretion,
determine, whether such information has been requested under this RFP or otherwise, and may
require the bidder to make oral presentations for clarification purposes or to present
supplementary information, in respect of the disclosure statement if so required by the IDC.
9.6 Based on its own assessment of the contents of the bidder’s disclosure statement and any
publicly available information which is relevant to the contents of such disclosure statement, the
IDC will decide whether the bidder’s conduct or any allegations relating thereto pose a risk,
reputational or otherwise, to the IDC; and if it reaches an adverse conclusion the IDC will in its
sole discretion have the right to disqualify a bidder from further participation in the tender process.
Disqualification on this ground may be done at any stage in the bid evaluation process prior to
contract award.
- 51 -
Page 51
Annexure 10: Local Content Declaration (If Relevant)
This Standard Bidding Document (SBD) must form part of all bids invited. It contains general
information and serves as a declaration form for local content (local production and local content are
used interchangeably).
Before completing this declaration, bidders must study the General Conditions, Definitions, Directives
applicable in respect of Local Content as prescribed in the Preferential Procurement Regulations, 2017,
the South African Bureau of Standards (SABS) approved technical specification number SATS
1286:2011 (Edition 1) and the Guidance on the Calculation of Local Content together with the Local
Content Declaration Templates [Annex C (Local Content Declaration: Summary Schedule), D (Imported
Content Declaration: Supporting Schedule to Annex C) and E (Local Content Declaration: Supporting
Schedule to Annex C)].
2. General Conditions
2.1. Preferential Procurement Regulations, 2017 (Regulation 8) make provision for the promotion of local production and content.
2.2. Regulation 8(2) prescribes that in the case of designated sectors, organs of state must advertise such tenders with the specific bidding condition that only locally produced or manufactured goods, with a stipulated minimum threshold for local production and content will be considered.
2.3. Where necessary, for tenders referred to in paragraph 1.2 above, a two stage bidding process may be followed, where the first stage involves a minimum threshold for local production and content and the second stage price and B-BBEE.
2.4. A person awarded a contract in relation to a designated sector, may not sub-contract in such a manner that the local production and content of the overall value of the contract is reduced to below the stipulated minimum threshold.
2.5. The local content (LC) expressed as a percentage of the bid price must be calculated in accordance with the SABS approved technical specification number SATS 1286: 2011 as follows:
LC = [1 - x / y] * 100
Where
x is the imported content in Rand
y is the bid price in Rand excluding value added tax (VAT)
- 52 -
Page 52
Prices referred to in the determination of x must be converted to Rand (ZAR) by using the
exchange rate published by South African Reserve Bank (SARB) on the date of advertisement
of the bid as indicated in paragraph 3.1 below.
The SABS approved technical specification number SATS 1286:2011 is accessible on
http:/www.thedti.gov.za/industrial development/ip.jsp at no cost.
2.6. A bid may be disqualified if this Declaration Certificate and the Annex C (Local Content Declaration: Summary Schedule) are not submitted as part of the bid documentation;
3. The stipulated minimum threshold(s) for local production and content (refer to Annex A of SATS 1286:2011) for this bid is/are as follows:
Description of services, works or goods Stipulated minimum threshold
_______________________________ _______%
_______________________________ _______%
_______________________________ _______%
3. Does any portion of the goods or services offered
have any imported content?
(Tick applicable box)
YES NO
3.1 If yes, the rate(s) of exchange to be used in this bid to calculate the local content as prescribed
in paragraph 1.5 of the general conditions must be the rate(s) published by SARB for the
specific currency on the date of advertisement of the bid.
The relevant rates of exchange information is accessible on www.resbank.co.za
Indicate the rate(s) of exchange against the appropriate currency in the table below (refer to
Annex A of SATS 1286:2011):
Currency Rates of exchange
- 53 -
Page 53
US Dollar
Pound Sterling
Euro
Yen
Other
NB: Bidders must submit proof of the SARB rate (s) of exchange used.
4. Where, after the award of a bid, challenges are experienced in meeting the stipulated minimum
threshold for local content the dti must be informed accordingly in order for the dti to verify and in
consultation with the AO/AA provide directives in this regard.
LOCAL CONTENT DECLARATION
(REFER TO ANNEX B OF SATS 1286:2011)
LOCAL CONTENT DECLARATION BY CHIEF FINANCIAL OFFICER OR OTHER
LEGALLY RESPONSIBLE PERSON NOMINATED IN WRITING BY THE CHIEF
EXECUTIVE OR SENIOR MEMBER/PERSON WITH MANAGEMENT RESPONSIBILITY
(CLOSE CORPORATION, PARTNERSHIP OR INDIVIDUAL)
IN RESPECT OF BID NO. .................................................................................
ISSUED BY: IDC
NB
1 The obligation to complete, duly sign and submit this declaration cannot be transferred to an external authorized representative, auditor or any other third party acting on behalf of the bidder.
2 Guidance on the Calculation of Local Content together with Local Content Declaration Templates (Annex C, D and E) is accessible on http://www.thedti.gov.za/industrial_development/ip.jsp. Bidders should first complete Declaration D. After completing Declaration D, bidders should complete Declaration E and then consolidate the information on Declaration C. Declaration C should be submitted with the bid documentation at the closing date and time of the bid in order to substantiate the declaration made in paragraph (c) below. Declarations D and E should be kept by the bidders for verification purposes for a period of at least 5 years. The successful bidder is required to continuously update Declarations C, D and E with the actual values for the duration of the contract.
I, the undersigned, …………………………….................................................... (full names),
do hereby declare, in my capacity as ……………………………………… ………..
of ...............................................................................................................(name of bidder
entity), the following:
- 54 -
Page 54
(a) The facts contained herein are within my own personal knowledge.
(b) I have satisfied myself that:
(i) the goods/services/works to be delivered in terms of the above-specified bid comply with the minimum local content requirements as specified in the bid, and as measured in terms of SATS 1286:2011; and
(c) The local content percentage (%) indicated below has been calculated using the formula given in clause 3 of SATS 1286:2011, the rates of exchange indicated in paragraph 3.1 above and the information contained in Declaration D and E which has been consolidated in Declaration C:
Bid price, excluding VAT (y) R
Imported content (x), as calculated in terms of SATS 1286:2011 R
Stipulated minimum threshold for local content (paragraph 3 above)
Local content %, as calculated in terms of SATS 1286:2011
If the bid is for more than one product, the local content percentages for each
product contained in Declaration C shall be used instead of the table above.
The local content percentages for each product has been calculated using the
formula given in clause 3 of SATS 1286:2011, the rates of exchange indicated in
paragraph 3.1 above and the information contained in Declaration D and E.
(d) I accept that the Procurement Authority / Institution has the right to request that the local content be verified in terms of the requirements of SATS 1286:2011.
(e) I understand that the awarding of the bid is dependent on the accuracy of the information furnished in this application. I also understand that the submission of incorrect data, or data that are not verifiable as described in SATS 1286:2011, may result in the Procurement Authority / Institution imposing any or all of the remedies as provided for in Regulation 14 of the Preferential Procurement Regulations, 2017 promulgated under the Preferential Policy Framework Act (PPPFA), 2000 (Act No. 5 of 2000).
SIGNATURE:_________________________
WITNESS No. 1 DATE: ___________
WITNESS No. 2 DATE: ___________