t260s series router user - libtor · t260 series router user manual shenzhen libtor technology...

T260 Series Router User Manual

Shenzhen Libtor Technology Co.,Ltd of 38

Add:Room 608, Building A,Hongshengyuan Industrial Zone,No.339 Bulong Road, Bantian StreetOffice, Longgang District, Shenzhen City, Guangdong Province.

Web:http:www.libtor.com Tel: 86-755-28345166-807 Fax:86-755-28345166-804

Mail:[email protected]

T260Sseries Routeruser manual

Product Version Page

V1.3

Product name: T260S Total:38

T260S series router usermanual

The manual is suitable for the following model :

Model Product type

T260S-A1 WCDMA/HSDPA/HSUPA/HSPA+/GSM/GPRS/EDGEwifi router

T260S-B1 CDMA/EVDO wifi router

T260S-DE1TD-LTE/FDD-LTE/WCDMA/TD-SCDMA/GSM/GPRS/EDGE wifirouter

T260S-DE2

TD-LTE/FDD-LTE/WCDMA/TD-SCDMA/WVD0/CDMA20001X/GSMwifi router






Copyright owned and kept by Shenzhen Libtor Technology Co,Ltd (2008-2014).

Any Company and Individual mustn’t use and copy the part and complete content andbroadcast in any form without permission from company.

Trade mark declaration

LIBTOR and Other LIBTOR trademarks are owned and controlled by ShenzhenLIBTOR Technology Co.ltd

The Trademark and Registered trademark mentioned above are owned by relatedperson.

Notice

Regarding to product version updating and the other reasons, this file’s content willbe updating based on research and development results .It is only used for instructionunless otherwise stipulated .All declarations, information and suggestions included inthis files can’t make up with any forms of guarantee.






Chapter 1: Product specification

T260S industrial wireless router communication products which are based on 3G and4G internet requirements and developed by Shenzhen Libtor Technology co.ltd. Theyare mainly applied for data transmission of industrial users and support fortransparent data transmission, picture transmission , equipment monitoring andWireless router internet functions.

T260S use 32 bit processor , it can process protocols and a large amount of datawith a high speed . It also can match with many types of industrial module for 3G/4G internet .(3G:WCDMA/EVDO/TD-SCDMA, 4G:TD-LTE/FDD-LTE ).Providing 10/100M ethernet network interface ,WIFI wireless connector ,serial port,USB connector for connecting many kinds of terminal equipments .

Supporting Web configuration, easy management and remote message control .

1.1 Product description






1.2 Connector description

A Side

B side






A side：

1.LAN1/LAN2：Standard RJ45 connector；LAN1 can be used as WAN port in thestandard router mode.

2.DC Power connector：use 2.1mm round head power connector，Inner”+”.Outer:”-“，theVoltage Output is 6-35V， the power is larger than 10W.

B side：

1、3G/4G/WIFI antenna connector: Sub Miniature A (outer part is helical and the inner partis hole connector)

2.Indicator :LAN1/LAN2： The LAN1/LAN2 indicator light is on normally when wire internet

connect with LAN1/LAN2 port . The indicator light will be flashing sometimes when dataflow come through.

SYS light: SYS light will be on when power is connected .It flashes slowly when systemstarts normally. It flashes quickly when press reset button .

3G/4G light: It flashes quickly when dial(bridge connection AP) in 3G/4G or WiFi bridgeconnection mode. It will be on normally when connect successfully.

3． R (reset) button : Press this button for 5 seconds when it is in open state , SYS light willbe flashing quickly, restart . After that , Reset successfully.

4. Serial port connector: 2 mm 4 Pin connector. From left to Right is GDN/TX/RX/DC+,DC+ can be used as power output and power input.

5. SIM card slot : self locked slot, the card slot will be popped up when long press yellowbutton on the right






Indicator state specification

Name State Description

Systemlight(SYS)

Constant lightConstant light when power supplied, It shows powersupply is normal.

Flash slowlyThe light state will change from constant light to flashslowly which it takes about ten seconds when connectelectricity

Flash quickly The SYS light will flash quickly when press reset buttonfor 5 seconds. Then system will restart later.

3G/4GIndicator

Constant light Connection successful

Flash slowly Normal connection

Power off No connection

LAN1、LAN2light

Constant light Already connected RJ45 port

Power off light Disconnect RJ45 port

Reset button use method

SYS light (SYS) will be flashing quickly when long press RESET button, the system resetssuccessfully when router restarting.

Serial port’s usage

T260S only open UART1 as the RS232 serial port . Serial port connector listed from leftto right : GND/TX/RX/DC+, We only use GND/TX/RX when transmission. We canconnect this serial port with the serial port of 5 feet, 2 feet,2 feet separately in computer .Then it will create a serial port communication. DC+ is the connector of input and output forpower .( Such as :The output is 12 voltage when supply 12 voltage power, or it also cansupply equipment power by this port)






Power connector :

T260S offer 2.1 mm standard circle hole direct current supply The electrodes are divided intopositive pole and negative pole .Power supply voltage ranged from 6 to 35 voltage .Wesuggest using 12 voltage to supply power.

Antenna connector

T260S has two SMA antenna connectors which the outer part is spiral and the inner part ishole . It responds to 3G/4G/4G. WIFI antenna accordingly. User can choose suitable outershape and antenna automatically. The Bigger antenna gain , the more effecter of wirelesssending and receiving in theory . We advise using 3 -5DB antenna gain under 3G/4G/4Gantenna. WiFi antenna’s choice is based on the requirement of user coverage .Our Productsupport 15DB antenna gain at the maximum .

Chapter 2 Setting preparation

2.1 connecting equipment

You can connect your computer and router as below procedure.

2.1.1 Set computer ‘s IP address.

Before access to the web setting, we advise you to setting your computer into obtainIP address and DNS IP address automatically. Router can assign IP addressautomatically. If you want to assign static IP address to the computer , you need to setyour computer and router of LAN port IP address into a same subnet .( The defaultIP address is 192.168.10.1 for LAN port of router , Subnet mask is 255.255.255.0) .

2.1.2 Connection by WiFi

Check your Wifi router’s wireless internet connection, then click“connection”button to create connection, Wifi password :12345678






2.1.3 Confirm computer connection with router

Pls use Ping order to confirm if the computer connect with router or not when yourcomputer monitor successfully connected with IP.

For example :Proceed Ping order under Windows XP environment :Ping192.168.10.1

If LCD display as below, it means computer and router successfully connected.

2.2. Router login

Then login Web setting configuration of router .

Click http://192.168.10.1 in the address field of web browser , then click the username and password in pop-up window

http://192.168.10.1






The defaulted user name is admin and password is admin when you login at the firsttime to use .

2.3 Enter web setting

Enter web setting when you successfully login , Then you can set and managementrouter .






Chapter 3 Working mode

TS260 offer 4 types of working mode :3G/4G/4G wireless router mode (defaulted),standard wireless router mode. Wireless AP+wireless customer end bridge mode,wirelessAP+Wireless customer end mode:






3.1 3G/4G wireless router mode

The default to T260S is 3G/4G wireless router, Insert 3G/4G SIM card , Router willsearch 3G/4G internet automatically .You can also define the internet supplier what you wantto.

Server 3G/4G network APN Dial number User name Password

China mobile com TD-SCDMA cmnet *99# or*98*1#

card card

China Telecom CDMA2000 Null #777 Card card

China Unicom WCDMA 3G/4Gnet

*99# Null Null






3.2 Wire connection standard router mode

3.2.1 Static internet connection mode

Entering working mode to choose standard router mode, Choose the static IP address underWAN setting windows. Click IP address and net mask ,gateway and DNS which ISPprovided. Then apply it .

3.2.2 Dynamic internet connection way

Entering working mode to choose standard router mode, Choose the dynamic IP addressunder WAN setting windows. Click apply button ,then the router will obtain ISP assignedparameter automatically .






3.2.3 PPPoE internet connection way

Entering working mode to choose standard router mode, Choose the PPPoE under WANsetting and fill the user name,password that ISP offer . Click apply button ,

3.3 Wireless AP+ Customer end bridge mode

Choose this mode ,we can use T260S as a bridge connection for AP using, it’s used asbridge connection of former grade wireless router .

1.Set your computer’s IP address into 192.168.10.100, entering Web by wire connect LAN2connector, enter Web ,Choose wireless AP+ Customber end bridge mode .






2.Click LAN setting button, Search for Wireless network,






3.You can see the name of wireless AP within current coverage range, Choose wireless APaccordingly

4. Fill wireless AP password chose, then you can bridge connection former Wireless AP






3.4 wireless AP+Customer end mode

Web – working mode – Wireless AP+ Customer end mode , click apply. Wireless connection –Use menu of Internet ways to choose AP client – Dynamic

address (Get from DHCP server automatically , Click and search Wireless Internet,Then it will pop-up choice dialogue box that search for all wireless network .ChooseWiFi network you want to connect . Pay attention to channel’s IP you want to selectnet , click and connect. If the WiFi you chosen has password,Pls fill in passwordaccordingly under Wireless security. Pay attention that the password is character orhexadecimal. Then press apply button.

Web –wireless setting - choose Channel accordingly in wireless channel .






Chapter 4

4.1 Wireless safety

Wireless safety mode has several types, It can choose different safe mode as

your requirement .

Stop in use

Open system

WPA

WPA-PSK

WPA2-PSK

WPAPSKWPA2PSK(WPA-PSK and WPA2-PSK mixed mode )






4.1.1 Open system

There are two types of encryption :None and WEP

Description listed as below:

Web item Description

Encryption typeOnly two encryption type to choose:None andWEP.Choose”None”means no encryption,choose” WEP”showed as aboved

the length of WEPencryption

Only two length of WEP encryption types tochoose：64bit and 128bit。Default length :64bit。

Default key ID you can 4 WEP keys ,but only choose 1 key in use.Default key is Key 1

WEP Key

Choose key type and set WEP key number 。There aretwo types of WEP key:sexadecimal type and charactertype。You can set different Wep key based on differentencryption length and type .

WEP key setting :

64bit encryption： 10 unit sexadecimal or 5 unit character type.

128bit encryption：26 unit sexadecimal or 13 unit character type.






4.1.2 WPA

This safe mode offer WPA-PSK encryption and Raduis server certification

4.1.3 WPA-PSK

This mode is WPA-PSK encryption mode








Safe mode Choose WPA-PSK。

WPA-PSKencryption Only two choice：TKIP and AES。

WPA-PSKKey

Set key ，legal key length ：8-63 ASCII characters or 64sexadecimal (0~9、a~f or A~F)。

Key updateinterval Set key interval updating time . the unit is as per second.

4.1.4 WPA2-PSK



Safe mode Choose WPA2-PSK。

WPA-PSKencryption Only three choice：TKIP,AES and TKIPAES。

WPA-PSKKey

Set key ，legal key length ：8-63个ASCII character or 64sexadecimal (0~9、a~f or A~F)。







4.1.5 WPAPSKWPA2PSK



Safe mode Choose WPA2-PSK。

WPA-PSKencryption Only three choice：TKIP,AES and TKIPAES。

WPA-PSKKey

Set key ，legal key length ：8-63ASCII characters or 64sexadecimal (0~9、a~f or A~F)。







Charpter5 System service

T260S offer many items to choose, Here we mainly describe Virtual server ,serialservice and SMS service.

5.1 Virtual service

T260S can be used as a Internet server, offer many service function, Only need to fillright IP address of external connector,internal connector and internal server . then itcan be used as virtual service






5.2 Serial Port

One main functions of T260S is used as serial port server (customer end), Here, wecan connect many serial ports.

Regarding to this content of this chapter, we will give brief description

5.3 SMS service

We can send SMS to T260S router and control the start,close and restart by settingtelephone number if T260S have 3G/4G SIM card for sending and receivingmessages.The details listed below :






Charpter 6 Admin

6.1 Equipment function

Windows ME,2000,XP use UPnP Protocols. These systems can find routerautomatically by this Protocols if we start this function.

UPnP (Universal Plug and Play , namely is use immediately when you plug ) ismainly used for realizing intelligent connection and communication for equipment,There is no need t attending and using main server for users to find automatically andcontrol from different types web euipments of different suppliers

Use UPnP function, Router can realize NAT order came cross:when the computer inthe LAN came through.

Wireless Router can add ,delete NAT mapped table automatically based onrequirement whenWireless router communicate with Internet .And then it can solve some traditionalbusinesses (such as MSN vocie a,vedion ) can’t come cross NAT problems.






Tick radio box, press “apply” button ,and completed setting

6.2 Software updating

you can download the newest software router to get more and more functions andstable parameters by updating software.The procedure for updating software listed as below :(1): Store the updating files to your computer.(2): Click “scan”button to choose the software your need to upgrade.(3):Click “upgrading” button, and start to upgrade.

6.3 Default to factory value.

The Wireless router will restart automatically when is in the process of recoverysetting.

Default to factory value setting will clear all wireless Router setting information, andback to the first use status. This function is widely used for transforming equipmentfrom one internet environment to the other internet environment.Set the euipmentdefault to factory value.Then it can reset setting. It will be suitbale for currentinternet.

Click <default to factory value> button, Confirm it and then Default to factorysetting.

6.4 Password management

Blank wireless router user name/password is admin, User name can’t be






revised,Password can be revised. In order to be more safe ,advise revise password andkeep password information

The process listed as below :

(1) fill the original password in the <original password> radio box;Fill the newpassword in the <new password> text box, Refill the new password in the <confirmpassword> and confirmed it .(2) Click <confirm> button, completed the password revision.

Supplement :

T260S Serial Port manual sepcification

1. Serial service can be devided into order mode and serial transparent transmissionmode

a)Serial order mode:Send some orders to wireless router by serial port,we can obtaincurrent time,current web type, current internet total data, current 3G/4G signalstrength related information, detailed order can refer to serial port order table.

b)Serial port transparent mode : you can set the ip address and port of server you wantto connect,Make 3G/4G router connected with the pointed TCP or UDP server,establish transparent data transmission channel ,realize the data transparenttransmission.

C)If set serial service function open when it’s power off, then it’s on serial transparentmode and connect automatically pointed server when it’s power on .

d) If set setial service function closed when it’s power off, then it’s on serial ordermode and receive serial mode directly when it’s power on.

e)You just need to sending “+++”if want to back to serial order mode from serialtransparent mode. You just need to “ATO” if you want to back to transparent modefrom serial port oder mode.

2. Serial transparent mode can be devided into customer end mode and server mode ,

a) Customber end mode is normal use mode, it can connect remote serverautomatically when power on and can establish transparent data channel .






b) Server mode is detective mode , waiting for customber end connnection.Only the assigned IP from China telecom is visible IP in public network and it can beused as server. The assigned IP from China mobile communication and Chinaunicom are inside network IP. External network can’t access to, So it can’t be used asserver.

c)If you want to be used as a server, it can also use DDNS function. Namely is thatfasten a fixed DN with assigned IP casually ,customer end only need to connect thisfixed domain name and no worry the IP address frequency.

d)There are many providing DDNS service supplier so far,such as “Oray”,“3322” andso on , Only need apply for related information (such as DN,user name, password) toservice supplier and fill in the 3G/4G router setting. 3G/4G router can connectsuppliers accordingly and automatically and complete fixed dormain name .

3.If serial function is closed (transparent serial port function closed) ,then the serialport order can come into use.

T260S as customer end and realize serial data transmission

1. Use a computer’s port (Terminal A) and serial connector ofT260S(GND/TX1/RX1 from right to left ) connect the serial port of computer .itshould be (GND/RX/TX),Namely No.5 foot, No.2 foot, No.3 foot .

2. Use another computer (Server B), Link T260S with Internet line or WIFI, Openweb setting of Wirless router (192.168.10.1), Open “system service”, Choose “serialserive” to set






3. Install server serial software in No.B computer. Set server type : TCP server,Server IP address:192.168.10.2, Serial port :5000.Router will search termial euipmentautomatically and monitor connection successfully. Some software will get IP addressautomatically and can’t revise, then it enters WEB setting screen, modify parameterof serial service for router. Make server’s IP address accordded with ports one byone .






4.Open super terminal by using A computer,Choose COM1 connection, Pay attentionto making Baud and so on parameters same with web setting of router .






5.Now , It can data transparent transmission bettween A and B






T260S is used as server and realize remote data transsimission

1. First,register a DDNS account, then ,we use “oray” to test ,apply for Oray accountis szlbt.xicp.net.

2. Enter T260S user managment screen -3G/4G Setting -DDNS,fill in DDNS accountinformation ,make sure the account could be registered successfully.






3.Enter system service -serial port service , Start T260S’s server function






4.T260S connect Internet by China telecom 3G/4G web. Especially explaining, OnlyChina telecom provide external IP in domestic 3G/4G Internet. China unicom andChina mobile telecom provide internal IP , We can’t use DDNS

5. Find a computer whatever you want, Ping szlbt.xicp.net, obtain T260S’s IPaddress. We can obtain IP address (113.113.105.150).

6.Install TCP customer end software on computer. Do related setting .






7. T260S use serial port to connect a computer,open super customer end, then it canobain the data from customer end .






The use of T260S Virtual Server (port mapped)

As picture shows: there are three routers A,B,C, U is customer end . A and U are inthe same LAN , the IP address of A is 192.168.1.1, the IP address of U is192.168.1.56.B and C are in the other lan, the IP address seperately is192.168.10.1,192.168.10.5, The WAN port of Router B connect with Wan port ofRouter, it can obtain the WAN IP address: 192.168.1.55.

Virtual server can be defined: User U come cross Internet access to Router B byRouter A, Router B will transfer the ask from A automatically to Server (router) C.

Here, The connecting ways of B and setting is very important. The reqiurement ofconnecting ways listed as below:

2. B can he used as WAN port to connect external internet.






3.B can be used as LAN port to connect C

setting ways: Enter setting screen of Router B-system service- virtual service, setparameter as below:

The external port can fill freely, the service port of Internal Port should be kept samewith the service port of router C( 80 port is the port of Web configuration screen)Fill in as above,and store .

Now ,we can connect Router A by Customer end U. Fill Http://192.168.1.55:1000 inaddress colum and press enter button , then Scaner will enter web setting screen ofrouter C directly .

t260s series router user - libtor · t260 series router user manual shenzhen libtor technology...

Documents