Up to 250,000 lbf (1,112 kN) hook load

Up to 32,000 lbf (142 kN) pulldown capacity

Range III tubular capability

Precise hydraulic weight on bit control

LoadSafe® XD automated pipe handling system to 10,000 lbs (4,536 kg)

Automated rig fl oor and drilling controls

Automated onboard and remote diagnostics

RigIDTM

online technical documentation

ENHANCED SAFETY AND PRODUCTIVITY THROUGH ADVANCED AUTOMATION AND INTELLIGENT COMMUNICATION.For top hole work and horizontal drilling in excess of 10,000 feet total depth, nothing gets the job done faster, safer and more productively than the new Schramm T250XD Telemast® rig.

The environmentally protected control room with touch screen displays and joystick controllers integrate with a fully automated drill fl oor to keep your crew out of harm’s way.

Enhanced operator data acquisition systems and easy interface to third party performance monitoring devices gives you the knowledge to optimize your drilling program and keep pace with the accelerating drill technology revolution.

LoadSafe® XD, Schramm’s fully automated pipe handling system is an integral part of the T250XD package. Virtually hands free, LoadSafe XD offers the highest degree of operator safety available in the industry today, dramatically improving crew loyalty and retention.

Standard with diesel power, dual fuel or AC drive models are also available, along with a wide range of options to provide the tools you need to grow your business at a 21st century pace.

T250XD ENERGY

Precise hydraulic weight on bit control

LoadSafe® XD automated pipe handling system to 10,000 lbs (4,536 kg)

Automated rig fl oor and drilling controls

Automated onboard and remote diagnostics

RigIDTM

online technical documentation

Enhanced operator data acquisition systems and easy interface to third party performance monitoring devices gives you the knowledge to optimize your drilling program and keep pace with the accelerating drill technology revolution.

LoadSafe® XD, Schramm’s fully automated pipe handling system is an integral part of the T250XD package. Virtually hands free, LoadSafe XD offers the highest degree of operator safety available in the industry today, dramatically improving crew loyalty and retention.

Standard with diesel power, dual fuel or AC drive models are also available, along with a wide range of options to provide the tools you need to grow your business at a 21st century pace.

LOADSAFE ®XD

HYDRAULIC ROUGHNECKRemotely controlled to make and break connections and accommodate variancesin the landed height of the drill string.

STATE-OF-THE-ART CONTROL ROOMSpacious, climate controlled cabin is outfi tted with the latest automation control technology for drilling and pipe handling operations. Hardware connections are provided for remote wireless connectivity to third party data acquisition systems and Schramm factory support and preventative maintenance tools.

The ultimate in safe, reliable drill fl oor automation, intuitive joystick controllers are used to lift tubularsfrom horizontal racks and precisely mate to the topdrive spindle. Adjustable hydraulic clamps accommodate the full operating range of tubulars and provide fast, effortless make-up or break-out of tool joints.

SCHRAMM, INC. | 800 E. Virginia Avenue | West Chester, PA 19380 USAPhone: +1 610-696-2500 • Fax: +1 610-696-6950 • www.schramminc.com

SPECIFICATIONS

T250XDDECK ENGINE

· MTU 12V-2000TA DDEC · 760 bhp (567 kw) @ 1800 rpm · 1 x 110 gallon (415 l) fuel tank

COOLING · Two core, side by side heat exchanger with 56 inch (142 cm) diameter variable speed cooling fan · 130°F (54°C) ambient design temperature

MAST · Telescoping mast design permits long head travel and working height, yet short overall length in transport position. No crane required for rig up · Total height to top of crown fully extended 94 ft (28.65 m) · Free-standing mast design

TILTING TOP HEAD DRIVE · Heavy duty, single reduction gearbox with 4 two-speed disc valve type hydraulic motors · Infi nitely variable rotation speed via HRC control · Torque: 0-120 rpm @ 19,944 ft-lb (27,040 N-m). 0-182 rpm @ 13,300 ft-lb (18,032 N-m) · Fluid line pressure: 5,000 psi (345 bar)

FEED SYSTEM · 56 ft (17 m) head travel · 250,000 lbf (1,112 kN) pullback · Up to 106 fpm · 32,000 lbf (142 kN) pulldown · 200 fpm (61 m/min) pulldown speed

DRILL TABLE · Table opening: 27.5 inches (687 mm) diameter with table retracted · Number 1, 2 & 3 API split bowls provided · BOP clearance under the fl oor: 13.5 ft (4.1 m)

HYDRAULIC ROUGHNECK · Clamping range: 4.5 – 9.625 inch (11.43-24.45 cm) diameter · Clamping force: Adjustable up to 61,500 lbs @ 3,000 psi (273 kn @ 208 bar) · Make/break Torque: 60,000 ft-lb @ 3,500 psi (81,349 N-m @ 241 bar)

LOADSAFE® XD AUTOMATED PIPE HANDLING SYSTEM

· Built-in holding clamps with variable capacity from 4 - 24 inch (10 - 61 cm) allow for make-up or break-out of tool joints from top drive spindle · Capacity: Range III · Maximum lift capacity: 10,000 lbs (4,536 kg) · Average trip time: 1,250 f/h (381 m/h)

CONTROL ROOM · Skid mounted, raised into position using a cantilever system via hydraulic lift cylinders · Two joystick control stations with touchscreen displays, including drill rig operator and LoadSafe XD pipe handling system operator · Onboard and remote diagnostics, including provision for third party remote data communication interface · Safety hardened, climate controlled 10 x 15 ft (3 x 4.6 m) enclosure

SUB-BASE · Integral sub-base provides a stable mounting surface for the T250XD Telemast trailer

· Floor height: 15 ft (4.57 m) · Working clearance under fl oor: 13.5 ft (4.11 m) - 5.0 m optional · Working diameter under fl oor: 54.5 inches (1.38 m) to accommodate 54 inch (1.37 m) annular

WINCH · Planetary design with spring applied hydraulic release brake · 9,600 lbf (42.7 kN) bare drum line pull · 150 fpm (46 m/min) bare drum line speed · Hydraulic jib boom with 140° swing and 40 inch (1.02 m) extend · Aux winch and jib boom 3,000 lbs (1,363 kg)

HYDRAULIC SYSTEM · Open loop load sensing system · 7 micron fi ltration

ELECTRICAL SYSTEM · 24 volt DC electrical system · Designed to API 505 standards in hazardous location areas

WEIGHT AND DIMENSIONS (*) Note: Primary loads, for general illustration only, varies with rig confi guration

· Control room skid: 40’ L x 9’8’ W x 10’6” H @ 50,000 lbs, (12.2 x 2.97 x 3.2 m @ 22,680 kg) · LoadSafe XD: 53’ L x 8’6” W x 6’ H @ 44,000 lbs, (16.2 x 2.6 x 1.83 m @ 19,958 kg) · Sub-base: 40’2” L x 10’ W x 10’6” H @ 60,000 lbs, (12.2 x 3.05 x 3.2 m @ 27,216 kg) · Mast trailer less tag dolly: 54’8” L x 8’6” W x 13’6” H @ 100,000 lbs, (16.7 x 2.6 x 4.1 m @ 45,359 kg)(*) Optional items determine fi nal weight

STANDARD ACCESSORIES · Tool box · 50 hour maintenance kit

OPTIONAL EQUIPMENT · AC drive · Dual fuel drive · Water injection, foam injection and tool lubrication systems · LED lighting package for rig deck, mast, main work area and LoadSafe XD work area · API documentation package for API-Q1, 4F, 8C, 7K · CE mark for European requirements · See your Schramm representative for additional available options

Rig performance is directly related to conditions encountered in the fi eld. Rig specifi cations presented here illustrate equipment performance under factory test conditions. Schramm, Inc. continuously improves its products and reserves the right to change specifi cations, design, prices and terms at any time without notifi cation or obligation. These specifi cations do not extend any warranty, expressed or implied, nor do they or Schramm, Inc. make or imply any representation of the machine’s merchantability or fi tness for a particular purpose.