t-shirt - poloshirt cad drawing
DESCRIPTION
CAD drawing with Lecra Modaris . T-shirt and polo-shirt pattern Drawing in Mordaris Software . Detail Instruction on how to draw.TRANSCRIPT
2/8/2015
CAD ASSIGNMENT T-SHIRT, POLO SHIRT,
GRADING
Submitted to
Mohammad Tabraz
Submitted by
Mehady Islam
ID: 121-119-0-35
1st Create new folder in any drive except C-drive(Windows system drive)
2nd open the Modaris Aplicarion
CLICK file – new – new model name
Click Display -Size
-Tittle Block
HERE SIZE can be in Alpha or Numeric, For Alpha Click Start –Notepad-
And save the file name (xs to xxxl.eva ) “a” for alpha and “n” for numeric.
Press F7 –IMP EVT- CLICK – FILE – xs to xxxl.eva – open
FOR SAVE – FILE – ACCESS PATH – My folder – 1st box – 1 & 2 then Ok
FILE - SAVE – SAVE
SHEET-NEW
T-SHIRT LENGTH= CB Length + Back neckdrop
WIDTH =1/4 CHEST
F2 – RECTANGLE – ONE CLICK // WAIT// DOWN ARROW Button press
BOX info – Enter button press – mouse right click – Home button press
Parameter – length unit –cm
F1 – Develop- Curvelength – enter
Front neck drop
Back neck drop
½ neck width
SPACEBAR + MOUSE RIGHT CLICK to change direction
F3- insert point – Click on point cross sign
DRAW SHOULDER
F1-Straight- DX – SHOULDER LENGTH & DY – Shoulder Slop – (4 – 4.5)
And ROTATE – 20 Degree
Draw the neck Slope ( Front and back neck )
F1- BEZIER – left point to right point click
F1 – Parallel – Distance – Enter
DISPLAY – HANDLES
F3- RESHAPE
For 90 degree – F8- ANGLE – SPREAD SHIT – VERTICAL
DRAW THE ARMHOLE HEIGHT
F1-straight –armhole depth-enter right click
ADD shoulder tip to armhole height line – F1 straight – click the armhole height line –
ali2pts
F1 parallel line (-1.5)
F1 – DIVISION – LINE beginning to END CHECK
Armhole = F1- Bezier
F3 – Reshape and the upper angle is 90 degree
Delete all unnecessary point and line ( F3-deletation)
F4-seam for ½ parts and for full parts F5 – seam2pts and turn the half the part into full part
F3- marge for notch marking F2- notch
T-SHIRT SLEEVE LENGTH
Slv length+ (2/2.5)
F3 - length straight line – Curve length – enter
F1- Straight – DY=½ slv opening =enter
F3- Reshape F8-angle 89.50 is better
CHECK SLV opening Develop = ½ bicep slv
F3 – Attach on extra line
F1- DIVISION
F1-Straight – ½ bicep
F1-develop – curve – shoulder slop
F3- Insert point
F1 -Straight
F1- Straight – divide – 4 – enter
F1 – Bezier – point – shift – click not in line – right click
F3- Reshape – curve pts
F8 length can’t be more then 1 cm
F4 seam Press-J
F2-ROT2PT
F5-Seam2PTS
NECK length Rib= (Neck width X 2)-2
For seam allowance
F4- Piece SEAM – (BEGIN END)
Seam allowance for curve – 0.65cm
Straight line – 1.25cm
And rib 1 cm
FOR ADD text EDIT- EDIT
POLO SHIRT Polo shirt body is similar to T-shirt but has difference in bottom, polo shirt back part maybe
slightly longer then front part and polo shirt has slit
1.5 increase in bottom
Slit height- Straight 6.05 Then attach straight
The Front body bottom is (Slit height back-Slit height front) = height top than Back body
body bottom.
½ Across shoulder - ½ Neck width or ½ across neck = Shoulder
CB Slv length – ½ Across shoulder = Slv length
Polo shirt sleeve is similar to T-shirt but it has rib in the slv opening so slv
length in pattern is slv length – slv rib height (2.5 , according to measurement copy)
SLV rib width = slv opening full – 2 . seam a
POLO SHIR HAS PLACKET RIB
Placket and rib seam allowance is 1
COLLAR Required measurement
1. Neck round
2. Collar height
3. Collar stand CB
4. Collar stand CF
5. Collar point
TAKE the Collar length
F1 - Straight
F1 – Straight
Measure the CB collar Stand
F1 – Develop
F1- Straight
Draw the button radius measurement
F3 – length straight line
For shaping a minimum distance of (0.5 – 1 cm) need
F1-Develop
F1-Parallel
Measure the CB Collar height & Square Across
F1-Develop
F1-Straight
F2-ARC arrow
Seam Allowance 1
1st draw the ½ neck round by straight line then divide it in 3
then draw two upward line in 2 corner then measure CB collar Stand in both side and add
them then draw 2 parallel line in 1 cm gap each then measure CB Collar height & draw
parallel then in below use length straight line and draw 1.5cm then parallel line upward
Then collar point side draw squire 1cm then add the separation line point to squares corner
Then make a parallel line 1/3 of neck round in the middle side from the crossing line draw
line with arc arrow. COLLAR point measure in the separation line to corner line and with
developed add that point with upper crossing by arc arrow. And Bezier in right corner collar
stand and reshape like below
PATTARN GRADING F6 – F9 – F12
#F6 – Control – Click the desire point
REPORT X / REPORT Y
0.25 is added in HPS & shoulder tip & also be added in back neck drop if there is no grading
And so 0.25 is also deducted from Bottom always