t: +6084-367300/+6084-367369/+603-8946 6341 f: +6084-367306€¦ · updated on february 2018...
TRANSCRIPT
Updated on February 2018
CURRICULUM VITAE
Education 1. PhD (Advanced Manufacturing Technology), 2000, Universiti Teknologi Malaysia, Malaysia 2. M.Sc (Mechanical Engineering), 1988 Leeds University, United Kingdom 3. B. Sc (Production Engineering), 1985 Leeds Metropolitan University (formerly Leeds Polytechnics),
United Kingdom
Areas of Interest 1. Advanced Manufacturing Technology 2. Automation and Robotics 3. Intelligent Manufacturing 4. Design of Manufacturing System
Professional Qualification/ Membership/ Affiliation 1. Member, Board of Engineers Malaysia (BEM) Production 2. Graduate Member, Institute of Engineers Malaysia (IEM) 3. Member, MySET
Work Experience /Adminstrative Duties/Appointments
Position Duration
1. Director, Center for Quality Assurance, University College of Technology Sarawak (UCTS)
1st Feb 2013 – 31st Jan 2017
2. Director, Center for Research and Development, University College of Technology Sarawak (UCTS)
3. External Assessor/External Examiner Manufacturing Programme (Undergraduate) -UniMAP
1st Feb 2013 – Sept 2017 2013 – 2016
4. Professor, Department of Mechanical and Manufacturing Engineering , Faculty of Engineering, UPM
2011 to date
5. Deputy Dean, Academic, Student Affair, Alumni and Community Services, Faculty of Engineering, UPM
1st Jan 2012 – 31st Dec 2012
6. Deputy Dean Academic, Student Affair, Alumni and Community Services, Faculty of Engineering, UPM
March 2009 – July 2009
7. Associate Professor, Department of Mechanical and Manufacturing Engineering, Faculty of Engineering, UPM
2002 – 2011
8. Head Of Department, Department of Mechanical and Manufacturing Engineering, UPM
2002 – 2008
9. Assessor, Malaysian Qualifications Agency (MQA), Malaysia 2011 to date 10. Program Manager of Perceptual Robotics, Intelligent Systems and 2002-2004; 2009-2010
Prof. Datin Dr Napsiah Ismail Department of Mechanical and Manufacturing Engineering, Faculty of Engineering Universiti Putra Malaysia 43400 UPM Serdang, Selangor
T: +6084-367300/+6084-367369/+603-8946 6341 F: +6084-367306
Updated on February 2018
Robotics Lab (ISRL), Institute of Advanced Technology (ITMA), UPM
11. MPC Manufacturing Consultative Panel 2009 - 2012
12. Acting Deputy Dean (Graduate Studies and Research) 2008
13. JPA – Diploma accreditation (Panel) 14. National Science Fellowship (NSF) Scholarship Research Scheme
(Panel /Interviewer) 15. GMI External Verifier For Final Year Student Project 16. Member, Putra 3Q Council, Faculty of Engineering
2008 2008 2006 2004-2008
17. Program Coordinator, Master of Manufacturing System Engineering (MS without thesis), Deparment of Mechanical and Manufacturing Engineering, UPM
1999 – 2007
Publications Journals (Published more than 150 articles in cited and non-cited Journal) (List of 30 recent journals)
1. M.A. Samani, N. Ismail, Z. Leman & N. Zulkifli “Development of a conceptual model for risk-based
quality management system” Journal of Total Quality Management & Business Excellence1-16, 2017
2. MOA Aqel, MH Marhaban, MI Saripan, NB Ismail “Estimation of image scale variations in monocular visual odometry systems” IEEJ Transactions on Electrical and Electronic Engineering 12 (2), 228-243
3. Khairul Manami Kamarudin, Keith Ridgwa, Napsiah Ismail “Abstraction and Generalization in Conceptual Design Process: Involving Safety Principles in TRIZ-SDA Environment” Procedia CIRP 39, ( 2016 ), 16-21
4. Mohammad O. A. Aqel, Mohammad H. Marhaban, M. Iqbal Saripan, Napsiah Bt. Ismail “Adaptive-Search Template Matching Technique Based On Vehicle Acceleration For Monocular Visual Odometry System” IEEJ Transactions on Electrical and Electronic Engineering, 2016
5. MOA Aqel, MH Marhaban, MI Saripan, NB Ismail “Review of visual odometry: types, approaches, challenges, and applications” SpringerPlus 5 (1), 1897, 2016
6. Afsaneh Nouri Houshyar , Zulkiflle Bin Leman , Moh Khairol Anuar Mohd Ariffin , Napsiah Ismail , Hojat Pakzad Moghadam , Hossein Iranmanesh and Iran “ Proposed Linear-Mathematical Model For Configuring Cell And Designing Unequal-Area Facility Layout In Dynamic Cellular Manufacturing System” International Journal Of Industrial And Systems Engineering Vol 22, 2016
7. Umar Ali Umar, M. K. A. Ariffin, N. Ismail, S. H. Tang, Hybrid Multiobjective Genetic Algorithms For Integrated Dynamic Scheduling And Routing Of Jobs And Automated-Guided Vehicle (AGV) In Flexible Manufacturing Systems (FMS) environment, The International Journal of Advanced Manufacturing Technology, Jun 2015, pp 1-15, Online IF1.458
8. Firoozi, Z., Ismail, N., Ariafar, S., Tang, S. H., Ariffin, M. K. M. A. and Memariani, A. (2014). "Effects of Integration on the Cost Reduction in Distribution Network Design for Perishable Products". Mathematical Problems in Engineering, Volume (2014), DOI: 10.1155/2014/739741.
9. Firoozi, Z., Ismail, N., Ariafar, S., Tang, S. H., Ariffin, M. K. a. M. and Memariani, A. (2013). "Distribution Network Design for Fixed Lifetime Perishable Products: A Model and Solution Approach". Journal of Applied Mathematics, Volume (2013), DOI: 10.1155/2013/891409
10. Zohreh Molamohamadi, Rahman Arshizadeh, Napsiah Ismail "An EPQ Inventory Model with Allowable Shortages for Deteriorating Items under Trade Credit Policy," Discrete Dynamics in Nature and Society, vol. 2014, Article ID 476085, 10 pages, 2014.
11. Mahmoud Asad Samani, N. Ismail, Z. Leman and N. Zulkifli “Quality Management System and Risk Management System: Similarities and Possibilities for Integration” Applied Mechanics and Materials Vol. 564 (2014) pp 700-705
12. S.J. Golestaneh, N. Ismail, M.K.A.M. Ariffin, Tang S.H., M.R. Forouzan, A.A. Maghsoudi, Z. Firoozi. “Minimization of Residual Stresses in Submerged Arc Welding Process of Oil and Gas Steel Pipes by Committee Machine” Applied Mechanics and Materials Vol. 564 (2014) pp 519-524
13. Seyed Jafar Golestaneh, N. Ismail, M.K.A. Ariffin, S.H. Tang, Hassan Moslemi Naeini, Ali Asghar Maghsoudi, Zahra Firoozi. “Higher Desirability in Solving Multiple Response Optimization Problems with Committee Machine” Applied Mechanics and Materials Vol. 564 (2014) pp 608-613
Updated on February 2018
14. Abdolhossein Sadrnia, N. Ismail, M.K.A. Ariffin, N. Zulkifli and Omid. Boyer “Reverse Logistics Network Optimizing By Genetic Algorithm: A Case Study of Automotive Wiring Harnesses” Applied Mechanics and Materials Vol. 564 (2014) pp 740-746
15. A. Sadrnia, H. R. Soltani, N. Zulkifli, N. Ismail, and M. K. A. Ariffin “A Review of Nature-Based Algorithms Applications in Green Supply Chain Problems “IACSIT International Journal of Engineering and Technology, Vol. 6, No. 3, June 2014
16. A Nouri Houshyar, Z Leman, H Pakzad Moghadam, M K A M Ariffin, N Ismail, H Iranmanesh “Literature Review on Dynamic Cellular Manufacturing System” IOP Conference Series Materials Science and Engineering 06/2014; 58(1):012016.
17. S.H. Sadeghian, M.K.A.M.Ariffin, Tang S.H. and N. Ismail. “Integrated Dispatching Model of Automated Lifting Vehicles, Quay Cranes and Yard Cranes at Automated Container Terminal” Applied Mechanics and Materials Vol. 564 (2014) pp 678-683
18. M Syahrir Ahmad, B.T.H.T Baharudin, Z. Leman, N. Ismail, and S. Sulaiman “Thermal Parameter Affects On The Part Built Using 3D Printer Projet SD3000” Materials Science Forum Vols. 773-774 (2014) pp 833-841
19. Muhammad Yusuf, M.K.A. Ariffin, N. Ismail and S. Sulaiman “Surface Quality and Chip Formation in Turning of LM6 Aluminium Alloy and Particulate Reinforced Metal Matrix Composite” Materials Science Forum Vols. 773-774 (2014) pp 894-901
20. Muhammad Yusuf, M.K.A. Ariffin, N. Ismail and S. Sulaiman “Experimental Investigation on Surface Roughness and Tool Wear in Dry Machining of TiC Reinforced Aluminium LM6 Composite” Materials Science Forum Vols. 773-774 (2014) pp 339-347
21. Muhammad Yusuf, M.K.A. Ariffin, N. Ismail and S. Sulaiman “Effect of Machining Process on Surface Microhardness of Titanium Carbide Reinforced Aluminium LM6 Composite” Applied Mechanics and Materials Vol. 564 (2014) pp 495-500
22. Firoozi, Z., Ismail, N., Ariafar, S., Tang, S. H., Ariffin, M. K. a. M. and Memariani, A. (2013). "Distribution Network Design for Fixed Lifetime Perishable Products: A Model and Solution Approach". Journal of Applied Mathematics, Volume (2013), DOI: 10.1155/2013/891409
23. Zohreh Molamohamadi and Napsiah Ismail Developing a New Scheme for Sustainable Manufacturing” Journal of Materials, Mechnics and Manufacturing (IJMMM) (ISSN: 1793-8198) Volume 1, Number 1, 2013.
24. Zohreh Molamohamadi1, Napsiah Ismail, Zulkiflle Leman, Norzima Zulkifli “Development of a Consignment Inventory Model in a Two-echelon Supply Chain with Backorder” International Journal of Emerging Technology and Advanced Engineering, Volume 3, Issue 1, Pages 90-97, January 2013.
25. Zohreh Molamohamadi, Mandana Rezaeiahari, and Napsiah Ismail “Consignment Inventory: Review and Critique of Literature” Journal of Basic and Applied Scientific Research (ISSN: 2090-4304), Volume 3, Issue 6. Pages 707-714, 2013. Indexed by ISI,
26. Zohreh Molamohamadi, Napsiah Ismail, Zulkiflle Leman, and Norzima Zulkifli “Supplier Selection in a Sustainable Supply Chain” Journal of Advanced Management Science (JOAMS)
27. Z. Firoozi, N. Ismail, Sh. Ariafar, S. H. Tang, M. K. A. M. Ariffin, A. Memariani “Distribution Network Design for Fixed Lifetime Perishable Products: A Model and Solution Approach” Journal of Applied Mathematics 01/2013; 2013:13. · 0.83 Impact Factor
28. Abdolhossein Sadrnia, Napsiah Ismail, Norzima Zulkifli, M. K. A. Ariffin, Hossein Nezamabadi-pour, and Hamed Mirabi “A Multiobjective Optimization Model in Automotive Supply Chain Networks” Mathematical Problems in Engineering Volume 2013, Article ID 823876, 10 pages
29. S. C. Ng, N. Ismail, Aidy Ali, Barkawi Sahari, J. M. Yusof “Ultrasonic NDE for Internal Defect Detection in Multi-layered Composite Materials by Multi-resolution Signal Decomposition” Journal of Applied Sciences. 01/2013; 13(1):87-94.
30. U.A. Umar, M.K.A. Ariffin, N. Ismail, S.H. Tang “Conflict-Free Automated Guided Vehicles Routing Using Multi-Objective Genetic Algorithm” Research Journal of Applied Sciences, Engineering and Technology. 08/2013; 6(14):2681-2684., 2013
Conference Proceedings (Published more than 250 articles in proceedings) (List of 30 recent Conference Proceedings) 1. Firoozi, Z., Ismail, N., Ariafar, S., Ariffin, M.K.A.M. and Tang, S.H. Verification of A Distribution
network Design Model. 2013 International Conference on Mathematical Sciences and Statistics (ICMSS2013), AM-00126, Kuala Lumpur, Malaysia, February 5-7. 2013. 92, 2013
Updated on February 2018
2. Ariafar, S., Firoozi, Z. and Ismail, N. Model Verification for a Stochastic Facility Layout Design in a Cellular Manufacturing System. 2013 International Conference on Mathematical Sciences and Statistics (ICMSS2013), AM-00128, Kuala Lumpur, Malaysia, February 5-7. 2013
3. Syed Ali Hosseini, Taravatsadat Nehzati, Amin Nosratabadi, Napsiah Ismail “ Trend in Sustainability of facility design and production planning in Manufacturing” Proceedings in 2012 International Conference on mechanical and Electrical technology (ICMET20120, 24-26 July 2012, Kuala Lumpur
4. Syed Ali Hosseini, Amin Nosratabadi, Mohammadamin Okhovat, Taravatsadat Nehzati, Napsiah Ismail “ E-Manufacturing Challenges and Enables” Proceedings in 2012 International Conference on mechanical and Electrical technology (ICMET20120, 24-26 July 2012, Kuala Lumpur
5. N. Ismail, Y. Musa, Z. Leman, and B.T.H.T.Baharudin “Overall Equipment Effectiveness improvement Through Implementation Of Total Productive Maintenance” 26th International Conference on CAD/CAM, Robotics and Factories of the Future 2011, 26-28th July 2011, Kuala Lumpur, Malaysia
6. Abdolhossien Sadrnia, Mehrdad Nikbakht, Napsiah ismail, Norzima Zukifli, “”Fuel Optimisation Model in rverse Logistics Network: A Case study in Automobile Alternator Industrial
7. N Ismail, G.R.Esmaelian, M.Hamedi, S.Sulaiman “Balancing of Parallel Lines with Mixed-model product” 2011 International Confence on Management and Artificial Intelligence” 1 – 3 April, 2011, Bali, Indonesia
8. Hamedi, M, Esmaelian, G.R. N Ismail, “Developing Capability-based Virtual Cellular Manufacturing Systems and Comparison with Capability-based Classical Cellular Manufacturing Systems” Proceedings of the 2nd International Copnference on Mechanical, Industrial and Manufacturing Technologies (MIMT), 26-28 February,Singapore.
9. A.Norozi, M.K.A.Ariffin, N. Ismail, F.Mustapha “ A Hybrid GA-SA Algorithm for Multi-Objective Sequencing Problem in High-Product Mix Shop-Floor” Proceedings of the 2nd International Copnference on Mechanical, Industrial and Manufacturing Technologies (MIMT), 26-28 February,Singapore
10. M.R. M-Zaihirain, N. Ismail, S.M. Sapuan, S.V. Wong “Parametric Model For Early Manufacturing Cost Estimation” Proceedings Of Conference On Manufacturing Technology And Management, World Engineering Congress 2010,2nd – 5th August 2010, Kuching, Sarawak, Malaysia
11. S Viraya, N Ismail, B.T.H.T Baharudin “Overall Equipment Effectivess In Electronic Industries”Proceedings Of Conference On Manufacturing Technology And Management, World Engineering Congress 2010, 2nd – 5th August 2010, Kuching, Sarawak, Malaysia
12. Noorul Amni Qistina Mohd Daud, Nor Kamaliana Khamis, Napsiah Ismail, Nurul Akhtar Abd Hamid and Nurul Adillah Ariffin Mohd Ariffin “ E-Manufacturing Throughout Production Systems”Proceedings Of Conference On Manufacturing Technology And Management, World Engineering Congress 2010,2nd – 5th August 2010, Kuching, Sarawak, Malaysia
13. Adeel H. Suhail, N. Ismail, Basim A. Kidhir, Bashir Mohammed Materials Machinability Comparison Using Surface Roughness And Root Mean Square For Cutting Tool Vibration As Performance Characteristics In Turning Process” Proceedings Of Conference On Manufacturing Technology And Management, World Engineering Congress 2010,2nd – 5th August 2010, Kuching, Sarawak, Malaysia
14. R.Shahrjerdi, M.Khairol, F.Mustapha, N. Ismail, M. Esmaeili “Developing Inventory Models For The Seller-Buyer And The Vendor Supply Chain”Proceedings Of Conference On Manufacturing Technology And Management, World Engineering Congress 2010,2nd – 5th August 2010, Kuching, Sarawak, Malaysia
15. Taravatsadat Nehzati, Napsiah Ismail, Hannaneh Rashidi Bajgan, Faieza Abdul Aziz “Developing Spreadsheet Based Decision Support System To Solve Warehouse Layout Problem” Proceedings Of Conference On Manufacturing Technology And Management, World Engineering Congress 2010,2nd – 5th August 2010, Kuching, Sarawak, Malaysia
16. Mohana Pria Rainoo Raj, Napsiah Ismail, M.Y.Ismail “Design Improvement Of Carrier Tapes In The Packing Of Semiconductor Devices”Proceedings Of Conference On Manufacturing Technology And Management, World Engineering Congress 2010,2nd – 5th August 2010, Kuching, Sarawak, Malaysia
17. Sh. Ariafar, N. Ismail, S. H. Tang, M. K. M. A. Ariffin and Z. Firoozi “A Simulated Annealing Algorithm For Facility Layout Problem In Cellular Manufacturing Systems”Proceedings Of Conference On Manufacturing Technology And Management, World Engineering Congress 2010,2nd – 5th August 2010, Kuching, Sarawak, Malaysia
18. Mehdi Vasili , Tang Sai Hong, Napsiah Ismail, Mohammadreza Vasili “An Analytical Approach To Customer Driven Manufacturing”Proceedings Of Conference On Manufacturing Technology And
Updated on February 2018
Management, World Engineering Congress 2010,2nd – 5th August 2010, Kuching, Sarawak, Malaysia
19. Mohammadreza Vasili, Tang Sai Hong, Napsiah Ismail, Mehdi Vasili “A Conceptual Design Approach To The Development Of An Open-Rack Structure For Miniload AS/RS”Proceedings Of Conference On Manufacturing Technology And Management, World Engineering Congress 2010,2nd – 5th August 2010, Kuching, Sarawak, Malaysia
20. M.R. Khabbazi, N. Ismail, Md.Yusof Ismail and S.A. Mousavi “Data Modeling of Traceability Information for Manufacturing Control System” Proceedings of International Conference on Information Management and Engineering, 633-637, 2009
21. Adeel H. Suhail, N. Ismail, N.A. Abdul Jalil “In-process Surface Roughness Prediction Using Heat Generation Rate of Workpiece Surface in Turning Operation” Proceedings of the International Advanced of Technology Congress (ATCi), November 3-5, 2009, Kuala Lumpur
22. Ali Arab, Napsiah Ismail, Lai-Soon Lee“Simulation-Based Scheduling for e-Maintenance Systems Considering Remaining Useful Life of Equipments” Proceedings of the International Advanced of Technology Congress (ATCi),November 3-5, 2009, Kuala Lumpur
23. Gholamreza Esmaeilian, N.Ismail, S.Sulaiman, M.M.H.Megat Ahmad, M.Hamedi “A Heuristic Model to Create Initial Assignment of Mixed Model Production through the Parallel Assembly Lines” Proceedings of the International Advanced of Technology Congress (ATCi), November 3-5, 2009, Kuala Lumpur
24. M. Hamedi, N. Ismail, M. M. H. MegatAhmad, M. K. A. Ariffin, G. R. Esmaeilian“A Survey on Performance and Requirements of Virtual Cellular Manufacturing versus Classical Cellular Manufacturing and Future Research Issues” Proceedings of the International Advanced of Technology Congress (ATCi), November 3-5, 2009, Kuala Lumpur
25. Maryam Mousavi, Faieza Abdul Aziz and Napsiah Ismail“Virtual Environment and Virtual Reality Application in Automotive Industry: A Review” Proceedings of the International Advanced of Technology Congress (ATCi), November 3-5, 2009, Kuala Lumpur
26. Maryam Mousavi , Faieza Abdul Aziz, Napsiah Ismail “Trends of Virtual Reality in Malaysian Automotive Industries” Proceedings of the International Advanced of Technology Congress (ATCi), November 3-5, 2009, Kuala Lumpur
27. M.Fathi, A. Norozi, M.K.A. Ariffin, N. Ismail “A New Bidirectional Heuristic Algorithm in a Multi Objective ALBP” Proceedings of the International Advanced of Technology Congress (ATCi), November 3-5, 2009, Kuala Lumpur
28. Mohammad Reza Shahraki, Napsiah bt. Ismail , Shamsudin b. Sulaiman, Megat Mohamad Hamdan b. Megat Ahmad“Economic Production Quantity Model Considering Imperfect Products”Proceedings of the International Advanced of Technology Congress (ATCi), November 3-5, 2009, Kuala Lumpur
29. S.C. Ng, N. Ismail, Aidy Ali, Barkawi Sahari, J.M. Yusof, B.W. Chu“Non-destructive Inspection of Multi-layered Composites Using Ultrasonic Signal Processing” Proceedings of the International Advanced of Technology Congress (ATCi), November 3-5, 2009, Kuala Lumpur
30. A.Norozi, M.K.A.Ariffinand N. Ismail“Developing Mixed-Integer Programming Model for Minimizing the Overall Make-Span Time in Mixed Model Assembly Line”Proceedings of the International Advanced of Technology Congress (ATCi), November 3-5, 2009, Kuala Lumpur
Research Grants (2006 -2014)
No
Project Title
Year
Source of Fund
1. Robotics Intelligent Polishing system 2012-2014 RUGS 2 Reverse Supply Chain 2012-2014 Fundamental Research Grant
Scheme (FGRS) Ministry of Higher Education
3 Development of A Virtual Cellular manufacturing System Algorithm in Dual-Resource Constraints
2010-2012 Fundamental Research Grant Scheme (FGRS) Ministry of Higher Education
Updated on February 2018
4 Kinematics Analysis of Serial Robot Manipulators, Analytical and Experimental Artificial Intelligence Approach
2007 Fundamental Research Grant Scheme (FGRS) Ministry of Higher Education,
5 Internal Surface Flaws reconstruction of Composite Materials for Product Inspection in Robotised Manufacturing Cells
2007 Fundamental Research Grant Scheme (FGRS) Ministry of Higher Education, (FGRS)
6 Development of an Integrated CAD and Failure Mode and Effects Analysis for Mechanical components
December 2006-April 2009
Ministry of Science, Technology and Innovation (MOSTI),
7
Development of an Integrated Mechanical CAD/CAE/PDM andDesign for Six Sigma System (DFSS) for Product Design in New Product
January 2009- June 2010
Ministry of Science, Technology and Innovation (MOSTI),
Awards/Recognition
No Name of awards
Title Award Authority Award Type Year
1 Excellence Service Award UPM
2009, 1992
2 Setia Putra, UPM 2007
3 Silver Development of Signal Processing Algorithm for Effective Ultrasonic NDE on Multi-layered Composite Material
Pameran Rekacipta, Penyelidikan Dan Inovasi (PRPI 2011)
Universiti Putra Malaysia
2011
4 Bronze Facility layout problems in Cellular Manufacturing Systems
Pameran Rekacipta, Penyelidikan Dan Inovasi (PRPI 2011)
Universiti Putra Malaysia
2011
5 Bronze Formation of Capacity-based Virtual Cellular Manufcaturing Systems (CBVMMSs) in Dual-resourced Contraint (CDC) Setting over Semi Distributed Layout (SDLs)
Pameran Rekacipta, Penyelidikan Dan Inovasi (PRPI 2011)
Universiti Putra Malaysia
2011
6 Silver Design and Prototype of an Ergonomic Back-leaning Posture Support for Motorbike Riders
Exhibition of Invention, Research and Innovation UPM (PRPI 2010), 20th – 22nd July 2010, UPM
University 2010
7 Gold Development of a Heuristic Model for balancing in Mixed-Model in parallel Assembly Lines
Pameran Rekacipta, Penyelidikan Dan Inovasi (PRPI 2010).
Universiti Putra Malaysia
2010
Updated on February 2018
8 Silver Optimization of Cutting parameters based on Surface Roughness and Assistance of Workpiece Surface Tenperature in Turning Process” Main Researcher
Pameran Rekacipta, Penyelidikan Dan Inovasi (PRPI 2010),
Universiti Putra Malaysia
2010
9 Silver Development of a New Minimum Avidance System for a behavior-based Mobile Robot
Pameran Rekacipta, Penyelidikan Dan Inovasi (PRPI 2010),
Universiti Putra Malaysia
2010
10 Silver A New Path Estimition Stategy for Predicting Blind Persons’ Motion in Indoor Environment” Co-Researcher
Pameran Rekacipta, Penyelidikan Dan Inovasi (PRPI 2010),
Universiti Putra Malaysia
2010
11 Bronze Concurrent decision making at the Conceptual Stage Using Analytical Hierarchy” Co-Researcher
Malaysian Technology Expo 2010
Malaysian Association Research Scientists
2010
Professional Services / Consultation
No Year Title Authority
1. 2017 - 2018 External Assessor/External Examiner – Postgraduate Manufacturing Programme
Universiti Malaysia Perlis (UniMAP)
2. 2013 – 2016 External Assessor/External Examiner – Undergraduate Manufacturing Programme
Universiti Malaysia Perlis (UniMAP)
3.
2012-2020 Panel Assessor Malaysian Qualification Agency
4. 2009 - 2012 MPC Manufacturing Consultative Panel Malaysia Productivity Corporation (MPC)
5. 2014-2016 Peer Committee Univ Tenaga Nasional (UNITEN)
6. 2008 JPA – Diploma accreditation (Panel) Universiti Malaysia Perlis (UniMAP)
7 2008 National Science Fellowship (NSF) Scholarship Research Scheme (Panel /Interviewer)
Ministry of Science Technology and Innovation (MOSTI)
8. 2006 External Verifier For Final Year Student Project German Malaysian Institute (GMI)
Student Supervision
PhD (Main Supervisor) – 18 completed, 1 On-going
No. Name Title Status
1. Ruzaidi Bin Zamri (GS27200)
Surface Defect Detection And Intelligent Parameter Optimization For Image Processing Based Polishing Robot
Completed 2017
Updated on February 2018
Student Supervision
PhD (Main Supervisor) – 18 completed, 1 On-going
No. Name Title Status 2 Khairul Manami
Kamarudin (GS32294JD) Modeling The Conceptual Design Of Aircraft Landing Gear With Modern Triz And Pahl-Beitz Systematic Methodology
Completed 2017
3 Mahmoud Asad Samani (GS31897)
Development of a Risk-based Quality Management System Model for an Integrated Management System
Completed 2016
4. Zohreh Molamohamadi Development Of A Two-Level Trade Credit Model With Shortage For Deteriorating Products Using Hybrid Metaheuristic Algorithm
Completed 2015
5. Zahra Firoozi (GS31778) Development Of Integrated Models For Distribution Network Design Of Perishable Products
Completed 2015
6. Abdolhossien Sadrnia (GS28654)
Development Of A Multi-Objective Optimization Model For Transport And Environment In A Closed-Loop Automotive Supply Chain
Completed 2014
7. Seyed Jafar Golestaneh (GS21664)
Development Of Committee Machine Models For Multiple Response Optimization Problems
Completed 2014
8 Ng Sok Choo (GS19742) Internal Defect Detection And Reconstruction Framework For Laminated Glass Fibre Reinforced Polymer Composite Materials
Completed 2013
9 Maryam Hamedi (GS21328)
Development Of Capability-Based Virtual Cellular Manufacturing Systems In Dual-Resource Constrained Settings Over Semi-Distributed Layouts
Completed 2012
10 Shahram Ariafar (GS22031)
Inter-Cell And Intra-Cell Facility Layout Models Under Different Demand Environments In Cellular Manufacturing Systems
Completed 2012
11 Mohd Zaihirain Mohamed Rasin (GS15711)
Development of Activity-based Cost Estimation System in Sheet Metal Fabrication Environment
Completed 2011
12 Adeel Hani Suhail (GS17904)
In-Process Surface Roughness Monitoring Based On Workpiece Surface Temperature For Turning Operations
Completed 2011
13 Mohammad Reza Sharaki (GS18304)
Economic Production Quantity Model Based On Extended Cost Parameters For Imperfect Process And Defective Items
Completed 2011
14 Ali T.Hasan (GS17149) Neural Network Solution To Singular Configuration In Trajectory Tracking Of A Serial Robot
Completed 2010
15 Gholamreza Esmaeilian (GS17989)
Development Of A Heuristic Procedure For Balancing Mixed- Model Parallel Assembly Line Type II
Completed 2010
16 Soroush Avakh Darestani (GS16188)
Statistical Monitoring Of Supplier Performance In A Quality Management System Environment For The Iranian Automotive Industry
Completed 2010
17 Farayi Mushravati (GS13918)
Process Planning Optimization In Reconfigurable Manufacturing Systems
Completed 2008
18 Hayder M. A. Ali (GS15426)
Design And Development Of A Two-Degree Of Freedom Serial Ball And Socket Actuator With Adaptive Learning Control Algorithm
Completed 2008
19 Hamid Reza Soltani (GS31583)
A Hybrid Meta-Heuristic Algorithm For The Open Vehicle Routing Problem With Fuzzy Time Windows
On-going
MS with thesis (Main Supervisor)
Updated on February 2018
No. Name Title Status
1. Taravatsadat Nehzati (GS25201)
Production Schedulling in reconfigurable manufacturing System Using Fuzzy Logic”
Completed
2. Taravatsadat Nehzati (GS25201)
Production Schedulling in reconfigurable manufacturing System Using Fuzzy Logic”
Completed
3 Shaik Mohamaed Mohamed Yusuff (GS15842)
Electrical Discharge Machining Of Beryllium Copper Alloys Using Graphite Electrode
Completed
4 Ali Arab (GS20028) Optimal Maintenance Scheduling for Multi-component E- manufacturing Systems
Completed
5 Ismanizam Abdul Manaf (GS11211)
Reverse Engineering Techniques Using CMM And 3D Laser Scanner For Free Form Surfaces
Completed
6 Norhisham Seyajah (GS15852)
Mechanical Characteristics on Sawdust And Chipwood–Based Composite.
Completed
7 Maznah Iliyas Ahmad (GS13082)
Development of Material Handling Equipment Selection
Completed
8 Mohd Iqmal Mohd Ali (GS11383)
Optimisation of Drilling Process on Aircraft Composite Structure Using Design of Experiment (DOE).
Completed
9 Goay Lay Nee, Development of Cutting Tools and Machining Parameter Selection for Milling Processes
Completed
10 Chew Chee Leong Computerized Process Planning and Scheduling and Scheduling for Stamping Die Production.
Completed
11 Sivakumar a/l Dhar Malingam
Application Of Total Productive Maintenance Top Reduce Non-Stick On Pad Problem In Semiconductor Industry.
Completed
12 Mohd Sattar Development of Sorting System in the Plywood Grading Line
Completed
13 Pitton Nopnakorn Development of Graphic File Format for 2D based on ISO Technical Drawing Standard
Completed
14 Mohd Shahril Mohd Sani Kajian Produktiviti Melalui Applikasi Permodelan dan Simulasi Komputer Di Industri Kecil dan Sederhana (IKS)
Completed
15 Mohamad Irwan Yahaya A Case Study of a Complex Surface Modelling Using Advanced Manufacturing Technology”
Completed
16 Razali Samin The Robot Manipulation Trajectory Planning in the Complexity Positions.
Completed
17 Ahmad Yusairi Bani Hashim
Effective Robot Manipulation Through Soft Computing
Completed
18 Mohd Ahadlin Mohd Daud
The Evaluations of Machinability and Surface Texture in Electro-Discharge Machining of Tool Steel with Copper Electrode
Completed
19 Mohd Zaihurain Design of Scheduling and Sequencing Algorithm for Job Shop Manufacturing in Sheet Metal Fabrication
Completed
20 Rosli Darmawan Improvement Studies on Manufacturing Operation Design Methodology for MINT Pilot Plant
Completed
21 Tan Chee Fai Development of Feature Recognition System from 3D Model
Completed
22 Azman Senin Machining Parameters in Wire Cutting Process for Cooling Jig
Completed
MS without Thesis (Main Supervisor)
No. Name Title Status
1. Omar Abdullah @ Bonny Lu Hieng Siong (GS29074)
Manufacturing System Design of Automotive Components
Completed
Updated on February 2018
No. Name Title Status
2 Seyed Ali Hosseini (GS29710 )
Using artificial intelligence techniques to extending project time-cost analysis by removing precedence relationship and task streaming
Completed
3 Mazrul Akmal Mustpha (JM40105)
Cell Production in Manufacturing Industry Completed
4 Mohd Mazri Ahmad (JM40097)
Design Improvement on a product using DFMA Methodology
Completed
5 Hamzah Deraman (JM40108)
Design and Development of product based on reverse engineering concept using DFMA
Completed
6 Mohd Asnawi Omar (JM40101)
The Approach of Reverse Engineering and Optimization In Rapid Prototyping Technique
Completed
7 Amin Pouriran (GS26201)
Development of CAD/CAM Implementation in CNC Machining
Completed
8 Abouzar Kheiri (GS27054)
Design of Multi-process Manufacturing systems Completed
9 Nur Alyani Binti Zaihan (GS27344)
Auto Soldering Jig Completed
10 Lee Woon Kiow (GS27014)
Optimisation of the cutting parameter setting using fuzzy logic control
Completed
11 Arulpragas (GS26008) Improve Printing operation Efficiency through Innovative Material Handling Solution in Newspaper Printing Operation
Completed
12 Mohd Azrin (GS27373) Simulation of FMS using Software Completed 13 Mohankumar A/L
Shanmugam (GS27747) Wafer fab Automation Component management system
Completed
14 Mohd Zahirul Hasni B Zaminazha (GS24826)
A study Employability for CIAST’s Vocational Training Officer Program’s Graduate
Completed
15 Kamal Rusulan Bin Mohamed (GS26285)
Optimisation of Welding Parameters for Resistance Spot Welding Process
Completed
16 Masoud Pishdar (GS26514)
Product Design Analysis Model of Child Car Seat Using Design for Assembly Software
Completed
17 Hasnul Hisyam B Zainal Abidin (GS25724)
Eliminate Non-Value Process for Productivity Improvement in Texas Instruments Malaysia
Completed
18 Haspirudin Bin Basiron Finite State Machine Model for Material Handling Robotics System
Completed
19 Saiful Rizal Amirnudin (GS25941)
Productivity Improvement by Implementing SMED Concept in SMT Line
Completed
20 Khairil Anuar Abdul wahab
A Study of Orifice depth effect on the Small Motorcycle Engine Performance
Completed
21 Jum’azulhisham (GS24001)
Surface Roughness Effect of Up Cut and Down Cut Operation of CNC Milling Process
Completed
22 Khairil Anuar Abdul wahab (GS25642)
A Study and Implementation of Process FMEA in Motorcycle Engineering Manufacturing Process
Completed
23 Saiful Nizam Amirnudin (GS25941)
Productivity Improvement Using Single Minute Exchange (SMED) Concept Manufacturing System
Completed
24 Nordin Bin Hj Sabli (GS23606)
Contamination Reduction on Bare Silicon Wafer using 5-step method
Completed
25 Rozahalia Bt Abd. Razak (GS23665)
Productivity Improvement using TQM Completed
Updated on February 2018
No. Name Title Status
26 Asmawi Bin Mohd Khailani (GS23225)
Optimization of precision surface grinding and evaluation of flatness and roughness surface
Completed
27 Mohd Firdaus Bin Kadir (GS20576)
Design Of Jig And Fixture Completed
28 Lim Aik Leong, (GS26116)
Facility layout & process flow improvement in Manufacturing company
Completed
29 Siti Rohana Binti Ismail (GS24794)
Managing Risk in project Management Completed
30 Ahmad Taufiq Bin Abdul Rani(GS23566)
Production rate improvement in machining shop using ARENA simulation”
31 Noor Azam Bin Salim(GS23556)
Production rate Improvement in Machining Shops using ARENA Simulation Software
Completed
32 Norsaidah binti Mohamad (GS24301)
Study of Productivity Improvement in Palm Oil Company
Completed
33 Nurul Adillah Ariffin Bt Hj Muhamad Ariff (GS25508)
Performance Of Gluing And Stamping Plywood Using ABB Robot
Completed
34 Yusaini bin Musa (GS23965)
OEE Analysis and Improvement in Assembly of Steering Gear Production
Completed
35 Nor Shahril Bin Che Nazran (GS23973)
Overall Equipment Efficiency (OEE) of Ultra Low Energy Ion Implanter (ULE)
Completed
36 Arumugam Manikam (GS24002)
Overall Equipment Efficiency Completed
37
Norshah Afizi B. Shuaib (GS20103)
Determination of Automated Storage and retrieval System Dwell Point
Completed
38 Noorazman Ariff B. Azizul Rahman (GS20486)
Knowledge Management in Ministry of agriculture and Agro-based Industry Malaysia”
Completed
39 Mohana Pria Rainoo Rai(GS20597) “
Process Improvement Through Quality Management
Completed
40 Sivaganesh Veeraya (GS22139)
Improvement Of Overall Equipment Effectiveness (OEE) In Electronic Industries
Completed
41 Chen Foong Liung (GS21791)
Productivity Improvement in Manufacturing Industries
Completed
42 Ayaad M Althwani (GS21739)
Development of Process Planning for Machined Components
Completed
43 Zainudin Mat Yunus (GS18721)
Development of Surface Roughness Prediction Model in Milling Operation
Completed
44 Nizam Nasir (GS18560)
Design and Fabrication of Palletizing Robot Completed
45 Noviyanti (GS19990) Investigation of Project Management in Indonesia Completed 46 Mohd Azrul (GS17441) Design Optimization and Manufacture of
Mechanical Component Completed
47 Che Mohamad Bin Che Omar (GS18676)
Building of Virtual CNC Turning Machine by Using Virtual NC Software
Completed
48 Puteh Melor Wesma Bt Salehen (GS16890)
The Participation of SMEs of the Manufacturing Sector in the National Dual Training System (NDTS)
Completed
49 Haslinawati Bt Besar Sa’aid (GS17813)
New Facilities Management in a Manufacturing Company
Completed
50 Zaimah Hasan (GS17677)
Sustainable Manufacturing Systems Completed
51 Lim Cheng Wai (GS15737)
Process Control Tools in Semiconductor manufacturing
Completed
52 Mohammad Zamri Md Zain (GS16014)
Line Balancing in Automotive manufacturing Industry
Completed
Updated on February 2018
No. Name Title Status
53 Mat Safuan Bin Mohd Zin @ Mohd Zin (GS15311)
Run Out/Phase Out Management in Manufacturing Industries
Completed
54 Mohd Shahir Kasim (GS14959)
Development of shaft Alignment System Using Excel
Completed
55 M Shamsul Akbar Yudin (GS16170)
Improvement of Liquefaction Unit Using Advanced Process Control
Completed
56 Zakiah Sulaiman (GS16255)
Holistic Approach to Reliability Improvement Completed
57 Mohamed O A Aqel PLC Training Kit for Undergraduate Course” Completed 58 Shazarel Shamsudin Process Planning for Prismatic Components” Completed 59 Sukarnur Che Abdullah Facility Layout and Process Flow Analysis Of
Production Line In Heavy Industry Factory In Malaysia
Completed
60 Ahmad Rasdan Ismail (GS13465)
Design and Simulation of an individual Robotic Manufacturing Cell Using Grasp2000
Completed
61 Mohamad Faisal Malek (GS13801)
Reverse Engineering Approach in Design and Machining First Stage Turbine Blade
Completed