800-456-0600 | ritehite.com

» Enclose or isolate noisy equipment or operations

» Partition areas of multi-use facilities for sound-control

» Protect employee comfort and productivity

» Custom-design a noise-control solution for your specific application

» Apply an affordable alternative to permanent wall construction

» Reconfigure as needed when operations change

SZ Acoustic Curtain Walls

8900 North Arbon Drive

Milwaukee, WI 53223, USA

P 414-355-2600 (800-456-0600)

F 414-355-9248R20SZSS1014H1

Rite-Hite® and Zoneworks® are trademarks of Rite-Hite Holding Corporation. Rite-Hite products are covered by one or more U.S. patents with other U.S. and foreign patents pending. The information herein is provided as a general reference only regarding the use of the applicable products. The specifications stated here are subject to change.

www.ritehite.com

SZ Acoustic Curtain Walls

Insulated SZ panels are layered with sound-absorbing materials and can reduce noise levels by up to 22-25 dBs, depending on frequency and sound power.

SZ Panels: Higher and lower frequency soundsSound Transmission Class (STC): 23 Reduce noise from grinders, shredders, large industrial machines and equipment

SZ2 Panels: Mid-range frequency soundsSound Transmission Class (STC): 16 Dampen ambient sound from lift traffic, light machinery noise, voices, office equipment, etc.

Use SZ Curtain Walls to quiet big industrial noise or lesser ambient sound

Create safer, more productive work environmentsWalls can be configured to match any need, from single-machine isolation to full-room division, with full-panel sliding or stationary mounting.

Easy installationZoneworks® Curtain Walls suspend easily from ceiling joists or roof deck. Custom engineering ensures proper fit around corners and obstructions.

Quick, clean reconfigurationEasily move, lengthen or shorten modular curtain walls to match your facility use or product mix – with no wall demolition. Curtain wall panels connect securely with Velcro® attachment.

Fire retardant materialsPolyester batting is FMVSS-302 certified. Fire retardant vinyl fabric meets NFPA-701 and CFM flame resistant standards.

Compatible with all doorsAny door type can be incorporated into the design of a Zoneworks Curtain Wall. If desired, door framing can also be included in most applications.

Available options » Overhead filler panels

» FDA white vinyl

» Stand alone mounting frames

» Flexible wall support hanger

Note: Retrofit installation of any full height wall or curtain to an existing building may necessitate re-configuration or expansion of building fire suppression sprinkler system to maintain code compliance. It is the responsibility of the end user to consult with their insurer and/or local fire officials prior to installation of any retrofit curtains or walls.

SZ Curtain Wall panelSZ Wall enclosing noisy grinder