systems - neopro · 2012. 2. 23. · color, up to 1920x1200 60hz pc/dvi video • rs232 serial: 300...

3

By Phone: 619-258-2000By Fax: 619-258-2135

NeoPro is proud to offer the professional integrator high quality products designed and manufactured in the USA. Our products offer a high-end fit and finish, high performance, and are some of the most compatible and easy to use products available to integra-tors. This is because they are designed for integration. All of our products come with the tools, drivers, support information, and mounting accessories the integrator needs to get the job done quickly.NeoPro continues to innovate the products and features you need today by having the vision of tomorrow’s challenges.

Want To Talk?

By Email: [email protected] Mail:

Neothings, Inc.1594 Fayette St

El Cajon, CA 92020

Need To Write?

Like To Read?

Table Of Contents

Digital Video Distribution Systems Vandenberg................................................8 LightSpider-LP....................................................10LightSpider-SRX.................................................11LightSpider-4TX..................................................12Fiber Cable and Termination..................................14Sports Bar & Restaurant Systems Tahoe............................................................20Imperial....................................................22Lindbergh.................................................23Hawthorne........ ... ... ... ... .. ... ... .. ... ... .. ... ... ...24Quincy......................................................25Residential Audio & Video Distribution SystemsAvalon..... . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .31Borrego.... . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .32Fal lbrook... . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .33Gil lespie... . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .33Juneau... . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .34Kingman... . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .34Concord.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .35Delano.... . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .36Eureka.... . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .36Ontario..... . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .37Riverside..... . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .37Cat5-Receivers.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .38

www.neoprointegrator.com

54

Digital Video Distribution

SystemsDigital video has proven to be a for-midable challenge to even the most seasoned integrators. At NeoPro, we understand the challenges, and have created the industry’s best solution with the HDMI switching and Long run HDMI over fiber.Digital video is more susceptible to problems with long runs to zones, im-proper power wiring, and outside in-terference.In addition to solving all of these prob-lems with a single strand of low cost fi-ber, we’ve given the integrator all the serial and IR control features they need in the automated home.

76

media player

The

LightSpider

series can do

1,000 ft. runs

The NeoPro Vandenberg can

switch audio and HDMI video independently HDMI can go

direct for short

runs, or use

Cat5/6 baluns for

medium runs

All our HDMI and digital

audio sources can be central-

ized and shared.

5.1 and 7.1 audio can go to amps while 2

channel goes to TVs

98

• Input Voltage: 90-240VAC 50-60Hz, 80W esti-mated Dimensions: W: 17”, H: 1RU/1.75”, D 13” Weight: 10 lbs estimated

• Up to 1080p 60Hz• HDMI 1.4 3D formats supported• Up to 12 bit color depth• xvYCC color space supported• HDCP content encryption• 8 HDMI inputs• 8 HDMI outputs• 8 SPDIF digital audio inputs• 8 Toslink optical digital audio inputs• 4 SPDIF digital audio outputs• RS-232 port for serial control• TCP/IP port for serial control and setup and

administration• Switch SPDIF independently of HDMI

FeaturesSpecifications vandenberg

specification, including all required 3D formats, Deep Color (12 bits) at up to 1080p resolution. Color Gamut Metadata is supported to allow the use of xvYCC color spaces (HDMI 1.3 x.v.Color).Using the Vandenberg’s flexible audio routing system, both two channel audio and SPDIF/Toslink multichannel audio can be routed from the source device. This allows you to deliver audio to both the display speakers as well as a multi-channel amp. All digital audio inputs are routed independent, effectively giving 16 audio inputs in addition to the 8 HDMI

The Vandenberg is a true 8 x 8 HDMI matrix, offer-ing the end user a perfect video viewing experience with glitch free switching, zero delays from HDCP authentication, and flexible audio routing.As a true HDMI/HDCP repeater, the Van-denberg resolves situations of single HDCP key sources, and output blanking when switching other zones.The HDMI inputs and outputs support the video features found in the HDMI 1.4

audio signals. These can then be routed to any of the 8 HDMI outputs and the 4 SPDIF outputs on the rear panel.For convienience of integration, the Van-denberg includes IR, RS-232 and TCP/IP for controlling the matrix. A web interface is also included for setup and administra-tion.

1110

• Power Inlet: 9VDC with supplied power supply• Input Voltage: 90-240VAC 50-60Hz, 9W typical• Dimensions: Width: 8.6” (includes mounting

flanges), Height: 1.6”, Depth 4.9”• Weight: 0.9 lbs each unit• Digital audio modes over the HDMI port: PCM,

LPCM, DD 5.1, DTS, up to 7.1 channels LPCM audio

• Aux analog stereo transported at 96KHz/24bit• Aux audio bandwidth: 20 Hz to 20KHz at +/-

0.5dB• Video modes: 480p to 1080p 50/60Hz deep

color, up to 1920x1200 60Hz PC/DVI video• RS232 serial: 300 to 115.2K• Infrared (cable kit optional): 38-40KHz• Fiber spec: LC to LC multimode ‘simplex’

cable; recommend 62.5/125 micron for 0-500 feet, 50/125 micron from 500 to 1,000 feet.

Features

Specifications(LightSpider-LP)

lightspider-lp

• RS232 serial (bidirectional)- allows remote control of any display that has an RS232 control port. Great for power on/off control of projectors and flat panels.

• Bidirectional IR - Use the LightSpider as both a forward IR path to control the display device, or to capture IR com-mands in the zone and bring them back to the source equipment.

• Auxiliary analog audio - use for local amp with in-wall speakers, or support audio to the display when audio over HDMI is not available.

The LightSpider is an innovative fiber op-tic point to point bridge for long distance transport of HDMI, audio, RS232 serial data, and infrared signals. It can carry this set of signals up to 1,000 feet (305 meters) over a single strand of low cost multimode fiber cable.

The LightSpider is able to communicate all of these signals over a single strand of either 62.5/125 micron or 50/125 micron multimode fiber cable. No additional Cat5 or additional fibers are required to achieve full HD with HDCP encryption and EDID communications.• Go up to 1,000 feet without any con-

cern of signal degradation, HDCP dropouts and errors, or video ‘sparkles’.

• Up to 1080p 60Hz at max length - no derating of video capabilities as your cable gets longer.

• Full EDID communications - EDID dis-play information is carried all the way through the system, so no need to ‘copy’ EDID or worry about it getting erased.

lightspider srx

The LightSpider-SRX is an ultra thin receiver for use with any of the Light-Spider transmitters. It has the same features as the full size LightSpider except without RS232 and auxillary audio.

Features

Specifications(LightSpider-SRX)

• Power Inlet: 5VDC with supplied power supply• Input Voltage: 90-240VAC 50-60Hz, 5W typical• Dimensions: Width: 6.38” (includes mounting

flanges), Height: 0.76”, Depth 3.02”

1312

• Power Inlet: IEC320-C14• Input Voltage: 100-240VAC 50-60Hz, 35W typi-

cal• Dimensions: Width: 17”, Height: 1.74” (without

optional feet), Depth 10”• Weight: 7 lbs each unit• Digital audio modes over the HDMI port: PCM,

LPCM, DD 5.1, DTS, up to 7.1 channels LPCM audio

• Aux analog stereo transported at 96KHz/24bit• Aux audio bandwidth: 20 Hz to 20KHz at +/-

0.5dB• Video modes: 480p to 1080p 50/60Hz HDTV, up

to 1920x1200 60Hz PC/DVI video• RS232 serial: 300 to 115.2K• Infrared (cable kit optional): 38-40KHz• Fiber spec: LC to LC multimode ‘simplex’

cable; recommend 62.5/125 micron for 0-500 feet, 50/125 micron from 500 to 1,000 feet.

FeaturesSpecifications lightspider 4txadditional fibers are required to achieve full HD with HDCP encryption and EDID communications. • Go up to 1,000 feet without any con-

cern of signal degradation, HDCP dropouts and errors, or video ‘sparkles’.

• Up to 1080p 60Hz at max length - no derating of video capabilities as your cable gets longer.

• Full EDID communications - EDID dis-play information is carried all the way through the system, so no need to ‘copy’ EDID or worry about it getting erased.

• RS232 serial (bidirectional)- allows remote control of any display that has an RS232 control port. Great for power on/off control of projec-tors and flat panels.

• Bidirection-al IR - Use the LightS-

The LightSpider 4TX is an innovative fiber optic point to point bridge for long dis-tance transport of HDMI, audio, RS232 se-rial data, and infrared signals. It can carry this set of signals up to 1,000 feet (305 meters) over a single strand of low cost multimode fiber cable. The LightSpider 4-TX consists of 4 LightSpiders in a single 1RU rack mount chassis for convenience of centrally locating all source equipment at one location.

The LightSpiders are able to commu-nicate all of these signals over a single strand of either 62.5/125 micron or 50/125 micron multimode fiber cable (one fiber per LightSpider). No additional Cat5 or

pider as both a forward IR path to con-trol the display device, or to capture IR commands in the zone and bring them back to the source equipment.

• Auxiliary analog audio - use for local amp with in-wall speakers, or support audio to the display when audio over HDMI is not available.

1514

Neo Part# Length (feet) Descrip6on32-‐00016 100 LC-‐LC simplex fiber, 50/125 ONFR riser rated, 3mm orange32-‐00017 200 LC-‐LC simplex fiber, 50/125 ONFR riser rated, 3mm orange32-‐00018 300 LC-‐LC simplex fiber, 50/125 ONFR riser rated, 3mm orange32-‐00019 500 LC-‐LC simplex fiber, 50/125 ONFR riser rated, 3mm orange32-‐00020-‐050 50 LC-‐LC simplex INVISAFIBER™ clear fiber, 50/125 0.9mm32-‐00020-‐100 100 LC-‐LC simplex INVISAFIBER™ clear fiber, 50/125 0.9mm32-‐00020-‐150 150 LC-‐LC simplex INVISAFIBER™ clear fiber, 50/125 0.9mm

32-‐00020-‐200 200 LC-‐LC simplex INVISAFIBER™ clear fiber, 50/125 0.9mm

NeoPro Part # Descrip/on Fiber Type

Jacket Type

Opera/ng Temperature

Flame Retardancy

Crush Resistance

Fiber Count Diameter

Installa/on Tensile Load

Opera/onal Tensile Load

Installa/on Min. Bend Radius

Long Term Min. Bend Radius Standards

Simplex 31-‐00002

Simplex 50/125um Plenum -‐20°C to +85°C UL Listed Type OFNP

500 N/cm 1 2.9mm 110 lbs 70 lbs 5 cm (2.0 in) 3 cm (1.2 in) GR-‐409-‐CORE, ICEA-‐S-‐83-‐596, TIA568, TIA-‐598

Duplex 31-‐00003

Duplex zipcord 50/125um Plenum -‐20°C to +85°C UL Listed Type OFNP

500 N/cm 2 2.9mm x 5.8mm

220 lbs 110 lbs 5 cm (2.0 in) 3 cm (1.2 in) GR-‐409-‐CORE, ICEA-‐S-‐83-‐596, TIA568, TIA-‐598

Invisifiber 31-‐00006

Simplex, Transparent

50/125um Clear PVC -‐20°C to +85°C NA NA 1 0.9mm 50 lbs 50 lbs 4 mm (<3/16") 1 cm (~3/8") NA

UltraLong 31-‐00007

Duplex zipcord, 10G OM3

50/125um Plenum -‐20°C to +85°C UL Listed Type OFNP

500 N/cm 2 2.9mm x 5.8mm

220 lbs 110 lbs 5 cm (2.0 in) 3 cm (1.2 in) GR-‐409-‐CORE, ICEA-‐S-‐83-‐596, TIA568, TIA-‐598

Rugged2 31-‐00008

2 fiber rugged, in/outdoor


2,100 N/cm 2 6.5mm 360 lbs 90 lbs 9.8 cm (3.9 in) 9.8 cm (3.9 in) GR-‐409-‐CORE, ICEA-‐S-‐83-‐596, TIA568, TIA-‐598

Rugged4 31-‐00009

4 fiber rugged, in/outdoor


2,100 N/cm 4 6.5mm 360 lbs 90 lbs 9.8 cm (3.9 in) 9.8 cm (3.9 in) GR-‐409-‐CORE, ICEA-‐S-‐83-‐596, TIA568, TIA-‐598

Rugged Indoor/Outdoor cable• Available as 2 or 4 fibers• Ideal for installations requiring an extremely

rugged and reliable cable design where maxi-mum mechanical and environmental protec-tion are required

• Flame-retardant for indoor installations (Plenum rated)

• High crush resistance eliminates the need for innerduct

• Standard 2.0mm subcables can be directly ter-minated with standard connectors.

• Design is ideal for direct pulling with mesh grips• Cable materials are indoor/outdoor – UV, wa-

ter and fungus resistant. Jacket highly chemi-cal resistant for installation in harsh industrial environments

Fiber cable and termination1 (simplex) and 2 (duplex) fibers• Flame-retardant for

indoor installations (Plenum rated)• Suitable for general purpose indoor use, both

short patch cables and long runs up to 1,000

INVISAFIBER transparent cable• Single fiber simplex with clear PVC 0.9mm

jacket• Super bend tolerant - As small as 4mm bend

radius during installation.• The perfect solution for retrofit jobs where there

is no clean way to get from the TV back to the head end.

10G/OM3 Ultra Long Run Cable• Flame-retardant for indoor installations (Plenum

rated)• Suitable for general purpose indoor use, patch

cables and long runs up to 1,500’

cables from NeoPro are also a fast and cost effective way to deploy a fiber based video system. All cables are built to the highest quality standards and fully tested.

Pre-terminated Cables• Simplex fibers in both

standard or INVISAFIBER™

NeoPro can provide the integrator with all the tools and supplies needed for a successful installa-tion with fiber optics. Our INVISAFIBER™ clear PVC cable is the perfect solution for retrofit jobs. INVISAFIBER™ virtually dis-appears when installed along baseboards, crown molding, or masonry. Get as creative as you want going up and around doorways, ceilings, arch-ways, etc. and solve your customers toughest challenges.Fiber termination is now very easy with the AFL FAST termination kit. With very little prac-tice, the integrator can terminate fiber in as little as 2 minutes with no gluing and polishing.Our selection of bulk fibers can be ordered cut to length, and we offer a variety of types for most applications. Preterminated fiber

1716

Sports Bar&

Restaurant Systems

Sports bar and restaurant video systems are an expanding market in the com-mercial integration segment. Franchise chains bring the opportunity for multiple installs and steady work for the integra-tor.NeoPro has designed flexible systems that allows the growth in small incre-ments, rather than a forklift upgrade when the owner decides to add more TVs than the original system design can handle.The integrator can even mix and match system types with both coax and Cat5 versions available.

1918

Use a touch-

panel or remote

to control the

system.

Add up to 24 sources to get

every game on the air.

All the video gets

distributed by

NeoPro Tahoe

switch over low

cost CAT5.

Start with just

16 TVs, expand

up to 80!

With a 70V amp system we can

have more evenly spread, better

quality audio

Handle the audio seperately

with a NeoPro audio pre-amp

2120

tahoeThe Tahoe is a flexible video distribution system designed specifically for bar, restaurant, and retail applications. Typi-cally these systems will have a large number of wall mount-ed displays providing the viewer with several programs to watch in each seating area or zone. Operation of the matrix is usually handled by the control system’s user interface, but as a ‘just in case’ feature, the Tahoe features full control of the system from the front panel, including direct in/out switching entry, sequencing through inputs, and recalling any one of sixteen memory presets.Having a sports bar system go down is about as bad as running out of drinks, so we’ve designed the Tahoe for reliability. With dual hot-swappable power supplies, in case of failure, the system will continue operating on one supply. The front panel and control system will alert the staff, and a replacement can be installed without any downtime.

Specifications• Power Inlet: IEC 320-C14 (on each power

supply)• Input Voltage: 90-240VAC 50-60Hz, 30-150W

depending on cards and receiver loading• Supports both NeoPro active and NeoPro

passive receivers• Dimensions: Width: 17”(not inc. rack ears),

Height: 10.5” (6RU), Depth: 11” • Weight: 25 lbs• Video Bandwidth: 140MHz• RS-232 communications: 115.2K baud, full

two way protocol• USB: Slave device, Windows driver included• Rear IR: 3.5mm mono jack for 5V or 12V

blaster input, polarity insensitive• Max outputs: 80

• 24 inputs of 1080p component video• Dual hot-swappable power supplies ensure continuous operation • Each matrix card adds 16 outputs• From 16 to 80 outputs• Low cost single Cat5 cable to each display• 6RU chassis saves rack space• RS-232 and USB interface• IR control interface• Full control via front panel• 16 preset memory

Features

2322

Features

Specifications

lindbergh+imperial

Specifications• Video bandwidth through matrix section: 140MHz+

(full 1080p)• Video bandwidth pass-throughs: +/- 0.8 dB over

150MHz• Power Inlet: IEC 320-C14• Input Voltage: 90-240VAC 50-60Hz, 8W typical• Dimensions: Width: 17” Height: 3.45” Depth 10.5”

(not including removable feet)• Weight: 12 lbs• Video Bandwidth: 140MHz+ (full 1080p)• RS-232: 115.2K

baud, full two way protocol

• USB: Slave device, Windows driver included, installs as virtual COM port at 115.2K baud

• Rear IR: 3.5mm mono jack for 5V or 12V blaster input, polarity insensitive

The Imperial is one of our most flex-ible matrices with 12 inputs and 8 outputs of component video, with input pass-through connections. The pass-throughs are high bandwidth buffered copies of all the input signals, before the matrix switch, which allow the connection to an additional matrix, adding another 8 outputs. Up to 12 Imperials can be stacked to create a full non-block-ing 12x96 matrix.

The Lindbergh is the audio equiva-lent of the Imperial, with 12 inputs of digital and analog audio, plus volume and tone control. Stacking Lindberghs can build up to a 12x96 audio distribution system.

• 12 inputs Component video (Impe-rial)

• Left and right analog audio (Lind-bergh)

• Volume, Bass, Treble for each out-put (Lindbergh)

• Variable duration fade up/down (Lindbergh)

• Digital audio (SPDIF coax), doubles as composite video matrix (Lind-bergh)

• Full non-blocking matrix • RS-232, USB, IR front and rear• 16 memory scenes

• Power Inlet: IEC 320-C14• Input Voltage: 90-240VAC 50-60Hz, 13W typical• Dimensions: Width: 17” Height: 3.45” Depth

10.5” (not including removable feet)• Weight: 12 lbs• Analog audio bandwidth: 20 Hz to 20KHz• Digital audio modes: PCM, LPCM, Dolby, DTS• Digital audio/C-video bandwidth: 10MHz• RS-232: 115.2K baud, full two way protocol• USB: Slave device, Windows driver included,

installs as virtual COM port at 115.2K baud• Rear IR: 3.5mm mono jack for 5V or 12V blaster

input, polarity insensitive

2524

Features

Specifications

quincy+hawthorne

Specifications• Video bandwidth through matrix section: 140MHz+

(full 1080p)• Video bandwidth pass-throughs: +/- 0.8 dB over

150MHz• Video bandwidth through 6 units: +/- 1 dB over

140MHz • Power Inlet: IEC 320-C14• Input Voltage: 90-240VAC 50-60Hz, 8W typical• Dimensions: Width: 17” Height: 3.45” Depth 10.5”

(not including removable feet)• Weight: 12 lbs• Video Bandwidth: 140MHz+ (full 1080p)• RS-232: 115.2K baud, full two way protocol• USB: Slave device, Windows driver included, installs

as virtual COM port at 115.2K baud

• Rear IR: 3.5mm mono jack for 5V or 12V blaster input, polarity insensitive

The Hawthorne is one of our most flex-ible matrices with 12 inputs and 8 outputs of component video, with input pass-through connections. All outputs are over Cat5. The pass-throughs are high band-width buffered copies of all the input signals, before the matrix switch, which allow the connection to an additional matrix, adding another 8 outputs. Up to 12 Hawthornes can be stacked to create a full non-blocking 12x96 matrix. At the end points, convert from Cat5 back to RCA connections with the Hornet receiver, available as both an in wall or surface mount version.

No wall warts are ever needed since the Hawthorne sends power to the Hornet receivers (as do all of our Cat5 matrix switches).

The Quincy+ is the audio equivalent of the Hawthorne, with 12 inputs of digital and ana-log audio, plus volume and tone control. Stacking Quincys can build up to a 12x96 audio distribution system.• 12 inputs Component video (Haw-

thorne)• Left and right analog audio (Quincy)• Volume, Bass, Treble for each output

(Quincy)• Variable duration fade up/down (Quin-

cy)• Digital audio (SPDIF coax), doubles as

composite video matrix (Quincy)• Full non-blocking matrix • RS-232, USB, IR front and rear• 16 memory scenes


10.5” (not including removable feet)• Weight: 12 lbs• Analog audio bandwidth: 20 Hz to 20KHz• Digital audio modes: PCM, LPCM, Dolby, DTS• Digital audio/C-video bandwidth: 10MHz• RS-232: 115.2K baud, full two way protocol• USB: Slave device, Windows driver included,



2726

Residential Audio & Video Distribution

SystemsDistributed audio and video has al-ways been the sign of a truly integrat-ed home. Having all the sources cen-tralized allows the homeowner more flexibility on how they consume their media content, and at the same time, reduce visual equipment clutter in the living spaces.NeoPro has designed a range of distri-bution equipment tailored for the high end home, and tailored for the high end residential integrator. Interface to the control system of your choice quickly and reliably with our many driv-ers and support tools.

2928

Let’s centralize

all the AV gear,

less clutter in

each room.

We’ll use a home controller to send IR and

RS232 to the sources

All the audio

and video will

route through the

NeoPro matrix

switch

For your theater

room, we can do

a 5.1 speaker

system and

projector

The bedroom only needs a flat

panel and the remote. Clean!

Now all the other 6 zones can share the same sources!

3130


10.5” (not including removable feet)• Weight: 12 lbs• Video bandwidth: 140MHz+ (full 1080p)• Analog audio bandwidth: 20 Hz to 20KHz• Digital audio modes: PCM, LPCM, Dolby, DTS• Digital audio/C-video bandwidth: 20MHz (ex-

cept Avalon)• RS-232: 115.2K baud, full two way protocol• USB: Slave device, Windows driver included,



Features

Specifications

avalon

• Independent audio and video switching

• Cross conversion between both digital audio formats (Avalon)

• Digital audio (SPDIF coax), doubles as composite video matrix (except Avalon)

• NeoTouch™ front panel - no moving parts to jam

• Multiple control inputs - RS-232, USB, IR de-tector (front) and wired IR (rear)

• Highly visible Vacuum Fluorescent Display (VFD)

• 16 memories for storing and recalling switching commands

• Front panel lockout and blackout• Black rack mount kit included

(silver on request)• Black or silver chassis with choice of black

or white front panels• IR codes available in several

formats for easy integration

- For Units With Analog Audio -• Left and right analog audio• Volume, Bass, Treble for each output• Variable duration fade up/down

2RU series of Analog Audio and Video Matrices

Our 2RU series of audio and video matrix switches offer a wide variety of input/output sizes and signal combinations. Units can be mixed and matched or used stand-alone to give the most flexible sys-tem design options to the integrator. The general features and specifications below apply to the switches on the following pages.

Features

The Avalon is an 8 input matrix switch with 4 or 8 outputs designed for switching and distribution of high definition video and digital audio. This allows the centralization of all video source equipment, and distribution throughout the home. For installations with a large number of sources with mixed optical and coax digital audio, the Avalon is a great choice.

• 8 inputs of component video• 8 inputs of optical and coax digital audio• 4 or 8 zone outputs• Cross conversion between both digital audio formats

3332

Features

borrego+

The Borrego+ matrix switch is the heart of a centralized multiroom audio and video sys-tem. The Borrego+ features a preamp section to allow volume, bass and treble control of the analog audio, which can then be fed directly into multizone amplifiers for whole house audio. The Borrego+ is like having three independent matrix switches in one unit. Component video, digital audio/composite video, and the analog audio can all be controlled separately, allowing for maximum flexibility.Powerful time based commands can create smooth audio fades to avoid abrupt changes in volume, making the Borrego+ a powerful part of your system design. • 8 inputs of component video• 8 inputs of digital audio• 8 inputs of left and right analog audio, with Volume, Bass, and Treble for

each output• 4 or 8 zone outputs

fallbrook

gillespie+

FeaturesThe Fallbrook and Gillespie+ together form an 8x16 HD video and digital plus analog audio distribution system that is perfect for the larger home or small bar/restaurant. The Fallbrook has 8 inputs and 16 output zones of component video, while the Gillespie handles 8 inputs and 16 output zones of both digital audio (SPDIF) and left and right analog audio. The Gillespie+ also features vol-ume, bass, and treble controls for each output, so the output can be run directly into a multichannel amplifier.

3534

Features

kingman+

Juneau

The Juneau and Kingman+ together form a 12x16 HD video and digital plus analog audio distribution system that is perfect for the larger home or small bar/restaurant. The Juneau has 12 inputs and 16 output zones of component video, while the Kingman handles 12 inputs and 16 output zones of both digital audio (SPDIF) and left and right analog audio. The Kingman+ also features vol-ume, bass, and treble controls for each output, so the output can be run directly into a multichannel amplifier.

concord+

FeaturesThe Concord+ matrix switch makes for an easy install or retrofit by using low cost Cat5 cables. The Concord+ features a preamp section to allow volume, bass and treble control of the analog audio, which can then be fed directly into mul-tizone amplifiers for whole house audio. At the end points, convert from Cat5 back to RCA connections using any of NeoPros Cat5 receivers, available as both an in wall or surface mount versions.No wall warts are ever needed since the Concord+ sends power to the receiv-ers.• Superior video performance compared to other Cat5 systems for reliable HD

picture up to 1,000’• 8 inputs of component video• 8 inputs of digital audio• 8 inputs of left and right analog audio

3736

Features

eureka+

delano

The Delano and Eureka+ together form an 8x16 HD video and digital plus ana-log audio distribution system that is perfect for the larger home or small bar/res-taurant. No wall warts are ever needed since the Delano and Eureka+ send power to the Cat5 receivers (as do all of our Cat5 matrix switches).• 8 inputs of component video (Delano),8 inputs of digital + analog audio (Eu-

reka+)• 16 zone outputs over 1x Cat5 cable

ontario

riverside+

The Ontario and Riverside+ together form a 12x16 HD video and digital plus analog audio distribution system that is perfect for the larger home or small bar/restaurant. No wall warts are ever needed since the Ontario and Riverside+ send power to the Hornet receivers (as do all of our Cat5 matrix switches).• 12 inputs of component video (Ontario),12 inputs of digital + analog audio

(Riverside+)• 16 zone outputs over 1x Cat5 cable

Features

3938

CAT5 ReceiversCat5 receivers (sometimes refered to as ‘baluns’) convert the audio and video signal from any of our Cat5 based matrix switches back to RCA connector based video and audio. None of our Cat5 receivers require any power at the display. All power comes from the matrix switch.

Available as an in-wall single gang decora style module or as a surface mount metal chassis. The Hornet is a dual convertor with two Cat5 inputs. One half converts the video Cat5, and the other half converts the audio Cat5. In some cases these two Cat5s will be coming from the same switch, but for our 8x16 and larger units, one Cat5 cable will come from each switch.The Hornet uses NeoPro’s patented Auto-EQ technology for quick and easy installations. There are no EQ or gain settings to mess with - the Hornet (and Falcon) will sense the cable length and self adjust.

Hornet

Hornet SpecificationsMax Distance: 1,000 ft.Signals: Component video (YPbPr), Compos-ite Video or SPDIF digital audio, Left and Right analog audio.

Available as an in-wall single gang decora style module or as a surface mount metal chassis. The Falcon is a single video convertor with one Cat5 input.

Falcon

Falcon SpecificationsMax Distance: 1,000 ft.Signals: Component video (YPbPr).

Available as an in-wall single gang decora style module or as a surface mount metal chassis. The Raptor is a single video convertor with one Cat5 input. Designed for cost sensi-tive projects, the Raptor utilizes passive tech-nology. While this does not include the Auto-EQ circuitry, the Raptor will produce great video up to 125’

Raptor

Raptor SpecificationsMax Distance: 125 ft.Signals: Component video (YPbPr).

www.neoprointegrator.com

Printed in USA, Feb.2012

systems - neopro · 2012. 2. 23. · color, up to 1920x1200 60hz pc/dvi video • rs232 serial: 300...

Documents