Express5800 Servers

System Configuration GuideExpress5800/E110b

Contents:

IntroductionSpecificationExternal viewOutline drawing / ImagesTested operating system listConfiguration diagramSystem configuration steps overviewQuick configuration diagramSystem Configuration

E110b-M servers1. Basic system2. Processor3. Memory4. Internal drive5. Keyboard6. Mouse7. Optical disk drive8. Floppy disk drive9. System management

System Configuration GuideExpress5800/E110b-M

4th Edition, April 2011

Server chassis1. Consolidated PSU2. Server chassis3. Cooling fan box4. Blank Panel5. Cable Management kit6. DC power cableConsolidated PSU1. Consolidated PSU2. Power supply module3. Unit Management

Supplementary Notes

IntroductionThe document contains product and configuration information that enable you to configure your system.

The proper configuration of your system will be configured by following the step to select the components.The section to select the components mostly consists of two part, Then please select configuration firstly and select necessary

4. Internal drive(HDD / SSD) [std. 0 / max. 1]

Integrated SATA controller Standard 3Gb/s SATA

Supported SATA HDD, SATA SSD

NOTE SAS hard drive is not supported in the system.

Internal SAS/SATA cable[K410-XXXXXX]

SATA HDD (2.5-inch, 3Gb/s) XXX GB HDD 7,200rpm [NXXXX-XXX] YYY GB HDD 7,200rpm [NXXXX-XXX]

Configuration information

Selectable peripherals

Sample of section to select component:

4th Edition, April 2011NEC Corporation

• The icons on the configuration chart stand for the supporting OS as showing in the following table. • For the request to use Linux OS, please also refer to the website

http://www.nec.com/global/prod/express/linux/index.html

… Supported by NEC

… Certified by Distributor

2003 : Windows Server 2003 (with SP1 or later)

2003x64 : Windows Server 2003, x64 Edition

2003R2 : Windows Server 2003 R22003

R2x64 : Windows Server 2003 R2, x64 Edition2008 : Windows Server 2008

2008x64 : Windows Server 2008 (x64)2008 R2 : Windows Server 2008 R2 (x64)ESXi4 : VMware ESXi 4SL10 : SUSE Linux Enterprise Server 10

SL10x64 : SUSE Linux Enterprise Server 10(EM64T)

YYY GB HDD 7,200rpm [NXXXX-XXX]

SATA SSD (2.5-inch, 3Gb/s) XX GB SSD [NXXXX-XXX]

About icons:

System Configuration GuideExpress5800/E110b-M

The document contains product and configuration information that enable you to configure your system.

The proper configuration of your system will be configured by following the step to select the components.two part, configuration information, selectable peripherals list.

peripherals.

[std. 0 / max. 1](non hot plug)

SATA HDDSATA SSD

Internal SAS/SATA cableXXXXXX]

information

peripherals list

4th Edition, April 2011 2

The icons on the configuration chart stand for the supporting OS as showing in the following table. For the request to use Linux OS, please also refer to the website http://www.nec.com/global/prod/express/linux/index.html

EL4 : Red Hat Enterprise Linux ES4/AS4

EL4x64: Red Hat Enterprise Linux ES4(EM64T)/AS4(EM64T)

EL5 : Red Hat Enterprise Linux 5/AP5EL5x64 : Red Hat Enterprise Linux 5(EM64T)/AP5(EM64T)

ML4 : MIRACLE LINUX V4.0ML4x64 : MIRACLE LINUX V4.0(EM64T)

AXS3 : Asianux Server 3AXS3x64 : Asianux Server 3(EM64T)

Outline The low-power 1-socket server optimized for high

Features Achieves low power consumption with Intel® Atom Supports one 2.5-inch SATA and SDD Equips EXPRESSSCOPE Engine 2 to enable superior system management

Specification (Express5800/E110b

Hard drive

Capacity (std.)

Capacity (max.)

Hot swap

Memory sparingMemory mirroing

I/O Controller Hub (IOH)

Memory

Capacity (std./max.)Supported MemoryNative Speed (max.)Error detection and correction

ModelProduct Code

Processor

TypeClock SpeedNumber of processors (std./max.)L2 Cache (per core)Core and Thread (per processor)

4th Edition, April 2011NEC Corporation

Note:*1 Arrange an External DVD for maintenance and OS installation*2 Arrange Flash FDD if needed. For intended uses, refer to the Flash FDD Supplementary Notes in this guide.*3 Minimum configuration: 1x 1GB DIMM and no HDD or SSD, Maximum configuration: 2x 2GB DIMM, 1x 500GB HDD*4 Refer to Linux on NEC Express5800 on NEC global site for the latest information.

Expansion

16.7M color: 640x480, 800x600, 1, 024x768, 1, 280x1, 024

Operating: 10 to 40

Red Hat Enterprise Linux 4.8Red Hat Enterprise Linux 5.4

Refer to "Linux on NEC Express5800" on NEC global site

Supportedoperatingsystem

Certified by ISV *4

Tested operating system *4

Temperature, Relative HumidityIncluded Accessories

Weight(min./max.) *3Power consumption (DC12V, Max. config, Idle)Power consumption (DC12V, Max. config, Operating)Power consumption (AC power supply, Operating)

Dimensions (W x D x H)Interface

Type

GraphicsController/Video RAMColor depth and Resolution

StorageHot swap

Controller type and supported RAID levelOptical disk driveFloppy disk driveMedia bay

System Configuration GuideExpress5800/E110b-M

for high density mounting

Achieves low power consumption with Intel® Atom™ Processor N450.

Equips EXPRESSSCOPE Engine 2 to enable superior system management

Specification (Express5800/E110b-M)

Express5800/E110b-MN8100-1635F

Intel® Atom™ Processor N4501.66GHz

1/1512KB1C/2T

Intel® 82801HBM chipset0 GB/2GB (2x 1GB)DDR2-667 SO-DIMM

667MHz----

2.5-inchHDD: SATA 1TB (1x 1TB)2.5-inchSSD: SATA 100GB (1x 100GB)

Not supported

4th Edition, April 2011 3

installation purpose.*2 Arrange Flash FDD if needed. For intended uses, refer to the Flash FDD Supplementary Notes in this guide.*3 Minimum configuration: 1x 1GB DIMM and no HDD or SSD, Maximum configuration: 2x 2GB DIMM, 1x 500GB HDD*4 Refer to Linux on NEC Express5800 on NEC global site for the latest information.

Not supportedSATA 3Gb/s: No RAID feature

External drive (Optional)*1Optional: Flash FDD (1.44MB)*2

--

Integrated in Server Management Controller/32MB16.7M color: 640x480, 800x600, 1, 024x768, 1, 280x1, 024

1x SUV (1x Seial B, 2x USB 2.0, 1x VGA)22.1 x 453.5 x 119.4 mm

0.7kg/1.0kg23.3 W27.0 W

2091VA/2063W (System, max)Operating: 10 to 40°C/Non-Operating: -10 to 55°C, 20 to 80%(non condensation)

Getting started-

Red Hat Enterprise Linux 4.8 or later, Red Hat Enterprise Linux 4.8 (EM64T) or laterRed Hat Enterprise Linux 5.4 or later, Red Hat Enterprise Linux 5.4 (EM64T) or later

Refer to "Linux on NEC Express5800" on NEC global site

Outline The server chassis employing up to 20 E110b-M server

Features Up to 20 E110b-M servers can be installed in 3U height. Supports hot plug replacement for servers Supports hot plug-able redundant fan to enable to replace it without interruption to the system Power supplying from consolidated power supply unit

Specification (Server chassis)

Note:*1 Minimum configuration: No servers and no optional fan box,

box included

40x 1000BASE-T LAN connector (1000BASE-T/100BASE-TX/10BASE-T, RJ-45, 40x Back, 2 port per server)1x Management LAN connector (100BASE-TX/10BASE-T, RJ-45, 1x Back, shared w ith 20 server)

444.0 x 701.5 x 130.0 mm (Excluding inner rail), 466.0 x 724.5 x 130.0 mm (Including inner rail)

Operating: 10 to 40°C/Non-Operating: -10 to 55°C, 20 to 80%(non condensation)EXPRESSBUILDER (NEC ESMPRO Manager, Users guide(PDF)), SUV cable(0.3m),Tool-less slide

Interface

Dimensions(W x D x H)

Number of sever slots

Product nameProduct code

Included Accessories

Power connector

Cooling Fan

Chassis formfactor

Weight(min./max.) *1Power consumption(12VDC, min./max.) *1Power consumption(100VAC, Operating)Temperature , Relative Humidity

4th Edition, April 2011NEC Corporation

Specification (Consolidated PSU Outline

The power supply unit providing electrical power to many

Features Equips high efficient 80 PLUS® Gold power supply Supports up to 4 power module with hot plug and redundant feature Enables to supply electrical power for 80 servers per 1 consolidated power supply Enables to manage the consolidated power supply unit from remote site.

Note:*1 Minimum configuration: 2 power module, Maximum configuration*2 The maximum output per 1 DC connector can not exceed 840

1x Serial(RS-232C, 9-pin mini-Dsub, Port B, 1x Front), 1x VGA (15-pin mini-Dsub, 1x Front)2x USB2.0 (2x Front), 1x Management LAN connector (100BASE-TX/10BASE-T, RJ-45)

Power supply Number of Power moduleRedundant PSU Supported (needed more than 2 power modules, hot plug)

Type

Power connector

Max. output

444.0 x 671.0 x 43.5 mm (Excluding inner rail), 465.6 x 718.0 x 43.5 mm (Including inner rail)

Operating: 10 to 40°C/Non-Operating: -10 to 55°C, 20 to 80%(non condensation)Included Accessories

Input(AC)

Power consumption(100VAC, Operating)

Dimensions(W x D x H)Weight(min./max.) *1Temperature , Relative Humidity

Product nameProduct code

Interface

Cooling Fan

Power connectorChassis formfactor

Output(DC)

System Configuration GuideExpress5800/E110b-M

M server

M servers can be installed in 3U height.

able redundant fan to enable to replace it without interruption to the systemPower supplying from consolidated power supply unit

Specification (Server chassis)

box, Maximum configuration: 20 serves and 2 optional fan

Server chassisN8141-49F

2040x 1000BASE-T LAN connector (1000BASE-T/100BASE-TX/10BASE-T, RJ-45, 40x Back, 2 port per server)

1x Management LAN connector (100BASE-TX/10BASE-T, RJ-45, 1x Back, shared w ith 20 server)Redundant Fan supported, Hot plug

Up to 10 servers: standard / 11 to 20 servers : optional1x Propriety 12VDC connector

3U rackmount444.0 x 701.5 x 130.0 mm (Excluding inner rail), 466.0 x 724.5 x 130.0 mm (Including inner rail)

22kg / 42kg52W / 610W

2091VA / 2063WOperating: 10 to 40°C/Non-Operating: -10 to 55°C, 20 to 80%(non condensation)

EXPRESSBUILDER (NEC ESMPRO Manager, Users guide(PDF)), SUV cable(0.3m),Tool-less slide rail kit

4th Edition, April 2011 4

Consolidated PSU)

providing electrical power to many servers.

high efficient 80 PLUS® Gold power supply module.redundant feature

Enables to supply electrical power for 80 servers per 1 consolidated power supply unitEnables to manage the consolidated power supply unit from remote site.

configuration: 4 power module840W.

Power bayN8142-36F

1x Serial(RS-232C, 9-pin mini-Dsub, Port B, 1x Front), 1x VGA (15-pin mini-Dsub, 1x Front)2x USB2.0 (2x Front), 1x Management LAN connector (100BASE-TX/10BASE-T, RJ-45)

Standard : 2 / Max : 4

Supported (needed more than 2 power modules, hot plug)650W 80 PLUS® Gold Power supply (hot plug)

100-240 VAC±10%,50/60Hz±3Hz4x Propriety 12VDC connector

1,700W *22091VA / 2063W

Redundant Fan supported, Hot plugUp to 10 servers: standard / 11 to 20 servers : optional

4x Propriety 12VDC connector1U rackmount

444.0 x 671.0 x 43.5 mm (Excluding inner rail), 465.6 x 718.0 x 43.5 mm (Including inner rail)13kg / 15kg

Operating: 10 to 40°C/Non-Operating: -10 to 55°C, 20 to 80%(non condensation)Getting started,Tool-less slide rail kit

External view (Express5800/E110bFront view

Power On/ Standby switch

DUMP(NMI) switch

UID(Unit ID) switch

SUV connector

4th Edition, April 2011NEC Corporation

Pull-out tab

System Configuration GuideExpress5800/E110b-M

(Express5800/E110b-M)

Power LED

Status LED

HDD access LED

UID(Unit ID) LED

4th Edition, April 2011 5

Lever

External view (Server chassis)Front view

Server slots

Rear view

Fax box slots

4th Edition, April 2011NEC Corporation

LAN port A for servers

LAN port B for servers

System Configuration GuideExpress5800/E110b-M

External view (Server chassis)

Pull-out tab

Fax box slots

4th Edition, April 2011 6

Management LAN port DC 12V input connector

LAN port A for servers

LAN port B for servers

External view (Consolidated PSU)Front view

Pull-out tab

Serial connector(Port B)

STATUS LEDUID(Unit ID) button

UID(Unit ID)LED

Power button

4th Edition, April 2011NEC Corporation

Rear view

buttonPower LED

Power supply module bay

DC output button

DC output LED

System Configuration GuideExpress5800/E110b-M

External view (Consolidated PSU)

VGAconnector

USB connector

Serial connector(Port B)

Maintenance LEDLED

Maintenance

4th Edition, April 2011 7

Maintenancebutton

UID(Unit ID)LEDUID(Unit ID)

button

ManagementLAN connector

DC outputconnector

Pull-out tab

Outline drawing / Images (E110bOutline drawing

119.

4 m

m

22.1

mm

19.5

mm

Fron

t

4th Edition, April 2011NEC Corporation

Image (Interior view)

System Configuration GuideExpress5800/E110b-M

Outline drawing / Images (E110b-M)

441.2 mm

453.5 mm

Rea

r

4th Edition, April 2011 8

Outline drawing / Images (Server chassis)Outline drawing

701.5 mm

724.5

466.

0 m

m

Fron

t

4th Edition, April 2011NEC Corporation

724.5

130.

0 m

m

Images- Front view

- Rear view

System Configuration GuideExpress5800/E110b-M

Outline drawing / Images (Server chassis)

mm

724.5 mm

444.

0 m

m

Rea

r

4th Edition, April 2011 9

724.5 mm

Outline drawing / Images (Consolidated PSU)Outline drawing

465.

6 m

m

Fron

t

4th Edition, April 2011NEC Corporation

Images- Front view

- Rear view

671.0 mm

718.0 mm

43.5

mm

System Configuration GuideExpress5800/E110b-M

Outline drawing / Images (Consolidated PSU)

444.

0 m

m

Rea

r

4th Edition, April 2011 10

mm

mm

Tested operating system list (as of January 2011)Operating system

Red Hat Enterprise Linux 4.8Red Hat Enterprise Linux 4.8 (EM64T)Red Hat Enterprise Linux 5.5Red Hat Enterprise Linux 5.5 (EM64T)CentOS 4.8 (x86)CentOS 4.8 (x86_64)CentOS 5.5 (x86)CentOS 5.5 (x86_64)Debian GNU/Linux 5.0 (x86)Debian GNU/Linux 5.0 (AMD64)SUSE Linux Enterprise Server 10 SP3 (x86)SUSE Linux Enterprise Server 10 SP3 (x86_64)SUSE Linux Enterprise Server 11 (x86)SUSE Linux Enterprise Server 11 (x86_64)Vine Linux 5.1 (x86)

4th Edition, April 2011NEC Corporation

Vine Linux 5.1 (x86)Vine Linux 5.1 (x86_64)Turbolinux 11 Server SP1 (32-bit)FreeBSD 7.3 (i386)FreeBSD 7.3 (amd64)FreeBSD 8.0 (i386)FreeBSD 8.0 (amd64)Fedora 13 (x86) Fedora 13 (x86_64)

Note:Refer to "Linux on NEC Express5800" on NEC global site for the latest information. http://www.nec.com/global/prod/express/linux/

System Configuration GuideExpress5800/E110b-M

Tested operating system list (as of January 2011)Tested

XXXXXXXXXX

SUSE Linux Enterprise Server 10 SP3 (x86) XSUSE Linux Enterprise Server 10 SP3 (x86_64) X

XSUSE Linux Enterprise Server 11 (x86_64) X

X

4th Edition, April 2011 11

XXXXXXXXX

Refer to "Linux on NEC Express5800" on NEC global site for the latest information.

System configuration steps overview

Server chassis[N8141

Express5800/E110b-M[N8100-1635F]

1. Server 2. Server chassis

Up to 20 servers

Up to 20 Express5800/E110b-M servers can be installed into Up to 240 servers can be installed into one 42U rack frame The power electricity for 80 or less servers can be supplied The number of the server that can be installed in one rack Refer to the server installation guideline in the guide.

Quick configuration diagram

4th Edition, April 2011NEC Corporation

Server slots (max.20)

Proc.(Atom) 2x DIMM

slots1x HDDBay

2.5-inch HD bay2.5-inchSATA HDD2.5-inchSATA SSD

DIMM slots1GB memory(DDR2-667)(max.2GB)

Fan box1 - 10 servers: Standard11 - 20 servers: Optional

Server chassis

Server

Server or Blank panel

System Configuration GuideExpress5800/E110b-M

System configuration steps overview

Server chassis[N8141-49]

Consolidated PSU[N8142-36F]

2. Server chassis 3. Power unit

DC powercable

into one server chassis.frame in the power loading of 6 kVA per rack.

supplied by one Consolidated PSU with 4 power supply modules.rack depends on the system configuration.

Power cords

configuration diagram

4th Edition, April 2011 12

Power supply module

Power supply module

Power supply module

Power supply module

4x DC-outConn.

1x DC-inConn. DC power

cable

Power supplyStd.2, Max.4

: Standard20 servers: Optional

Server chassis

1x Management LAN

40xLAN(*1)

Power unit

*1 2 port / server

System configuration (E110b

Product Code Product NameN8100-1635F Express5800/E110b-M (1C/N450) 1x Atom N450 (1.66GHz, 1 core/2 thread)

no

1. Basic system

EL4 EL4x64 EL5 EL5x64

2. Processor [std. 1]

Intel® Atom™ Processor N450, 1.66GHz, 1 core/ 2 thread

NOTE To connect input devices and optical drive with server, use the

SUV(Serial/USB/Video) cable attached with server chassis.

4th Edition, April 2011NEC Corporation

3. Memory [std. 0 / max. 2]

1GB memory(1x 1GB)

NOTE At least one DIMM is required to order to configure

DDR2-667 (PC2-5300) non-ECC, Unbuffered

4. Internal drive(HDD / SSD) [std. 0 / max. 1]

Integrated SATA controller Standard 3Gb/s SATA

Supported SATA HDD, SATA SSD

NOTE SAS hard drive is not supported in the system.

Internal SAS/SATA cable[K410-223(00)]

SATA HDD (2.5-inch, 3Gb/s) 160GB HDD 7,200rpm [N8150-316] 500GB HDD 7,200rpm [N8150-317] 1TB HDD 7,200prm [N8150-335]SATA SSD (2.5-inch, 3Gb/s) 100GB SSD [N8150-708]

System Configuration GuideExpress5800/E110b-M

System configuration (E110b-M)

Basic Configuration1x Atom N450 (1.66GHz, 1 core/2 thread)no-DIMM, no-HDD

threadStandard

To connect input devices and optical drive with server, use the SUV(Serial/USB/Video) cable attached with server chassis.

SUV cable

2x USB2.01x Serial1x VGA

4th Edition, April 2011 13

[N8102-370]

configure the system.

[std. 0 / max. 1](non hot plug)

SATA HDDSATA SSD

Internal SAS/SATA cable223(00)]

System configuration (E110b

5. Keyboard

104 Keyboard [N8170-25] USB

USB Optical Mouse [N8170-22] USB, 2-button, Optical with wheel

6. Mouse

7. Optical disk drive

External DVD-ROM(USB)

NOTE: Optical drive is required for installation of operating system and system maintenance.

8. Flash FDD (connect to USB port)

4th Edition, April 2011NEC Corporation

8. Flash FDD (connect to USB port) Flash FDD

Capacity:1.44MB

NOTE: FDD is NOT included as standard. Arrange Flash FDD

Supplementary Notes in this guide. Flash FDD [N8160-86] can not be shipped to Taiwan/Korea

System Configuration GuideExpress5800/E110b-M

System configuration (E110b-M)

[N8160-85]

Optical drive is required for installation of operating system and system maintenance.

2003R2x642003R2

EL4 EL4x64 EL5 EL5x64

2008 2008x64 2008 R2

8. Flash FDD (connect to USB port)

4th Edition, April 2011 14

8. Flash FDD (connect to USB port)[N8160-86]

FDD if needed. For intended uses, refer to the Flash FDD

Taiwan/Korea.

System configuration (E110b

9. Server Management (BMC, EXPRESSSCOPE Engine

Remote KVM and Media License License for one server Remote console and remote media are enabled regardless of OS status. Remote console

Displays a graphics console on the web browser of remote terminal (PC/server)Controls keyboard and mouse via the remote terminals' web browser

Remote mediaProvides access to the CD/DVD/FD/Flash memory on the remote terminals (PC/server) as if

the user were accessing the drives locally

EXPRESSSCOPE Engine 2 1x Management LAN (100BASE-TX, 10BASE-T)

Option

Monitoring serverMonitoring temperature /fan/voltage

Collecting hardware event log

Functions The functions are enabled regardless of OS

status and operating condition. (with some exceptions)

4th Edition, April 2011NEC Corporation

Stall monitoring/automatic reboot POST/BIOSStall monitoring

Alerting

HW failure, Boot failure and OS panic(by SNMP,E-Mail via LAN)HW failure, Boot failure and OS panic(via COM port (modem))

Remote console(via LAN)

POST/BIOS setup, DOS utility*2Boot screen, Panic screen *2CUI screen(OS console) *2GUI screen(OS console)

Remote control(via LAN)

Remote reset /power on–off /dump *OS shutdownRemote media (CD/DVD, FD, Flash)(via LAN)CLP (Command Line Protocol, DMTF compliant)Remote control via web browser(via LAN)Remote batchScheduling

Maintenance Remote boot (PXE boot), maintenance utilityOthers Automatic IP address setting via DNS/DHCPRemote Wake Up Wake On LAN, Wake On RingGroup management Monitoring/controlling by the groupIndustry Standard IPMI (version)*1 Linux uses serial console. The standard serial port bus is*2 Available to manage via serial port

NOTE When using H/W remote KVM console function the display For details on OS support and recommended browser

"EXPRESSSCOPE Engine 2 Users Guide”.

System Configuration GuideExpress5800/E110b-M

System configuration (E110b-M)

(BMC, EXPRESSSCOPE Engine 2)

[N8115-03]

Remote console and remote media are enabled regardless of OS status.

Displays a graphics console on the web browser of remote terminal (PC/server)Controls keyboard and mouse via the remote terminals' web browser

Provides access to the CD/DVD/FD/Flash memory on the remote terminals (PC/server) as if the user were accessing the drives locally

Standard

E110b-M

EXPRESSSCOPE

Engine 2(Standard)

EXPRESSSCOPEEngine 2 with

Remote KVM andMedia License

X X

X X

4th Edition, April 2011 15

X X

HW failure, Boot failure and OS panic X X

HW failure, Boot failure and OS panic X X

X XX *1 XX *1 X

- X*2 X X

X XRemote media (CD/DVD, FD, Flash)(via LAN) - XCLP (Command Line Protocol, DMTF compliant) X XRemote control via web browser(via LAN) X X

X XX X

Remote boot (PXE boot), maintenance utility X XAutomatic IP address setting via DNS/DHCP X X

X XX X

2.0 2.0is used when using via LAN.

display is in 65,536 colors with resolution of 1280x1024.browser of Remote terminal, and other functions, refer to the

System configuration (Server chassis)

Product Code Product NameN8141-49F Server chassis 2 power

2 cooling1 SUV cableNo DC power

1. Server chassis

2. Cooling fan box[std. 1 / max. 2] Additional FAN Box

3. Blank panel

Blank Panel NOTE

No blank panel is included in server chassis. Please be sure to order blank panels of the number of

NOTE The fan boxes for cooling 10 E110b-M servers are installed 1 additional FAN box need to be ordered if more than 11 Supports hot plug feature and redundant configuration

4th Edition, April 2011NEC Corporation

Please be sure to order blank panels of the number of

4. Cable Management Kit

Cable Management Kit for rear (600mm/700mm width rack) Cable Management Kt for front (700mm width rack) NOTE

The kit is used for the cable management of LAN cablesto the rear of the server chassis. The kit includes tray and

To order the kit is recommended for suitable cable management The kit to be ordered depends on the width of 19-inch rack

5. DC power cable DC power cable (60cm) DC power cable (90cm)

NOTE The power cable is used for connecting server chassis Please be sure to order the cable of enough length to

System Configuration GuideExpress5800/E110b-M

System configuration (Server chassis)

Basic Configurationpower supply modulescooling fan box as standard for cooling up to 10 serves

cablepower cables, No blank panel

[N8181-75]

[N8141-50]

slots in which the server is not installed.

installed as standard. .11 servers are installed into one chassis. chassis.

4th Edition, April 2011 16

slots in which the server is not installed.

Cable Management Kit for rear (600mm/700mm width rack) [N8141-53][N8141-54]

cables and power cords connectedand guide rail to fix the cables.

management.rack frame.

[K410-213(0A)][K410-213(0B)]

chassis and Consolidated PSU.connect server chassis and Consolidated PSU.

Guide rail Tray

DC power cable

System configuration (Consolidated PSU)

1. Consolidated PSU

ProductCode Product Name

N8142-36F Consolidated PSU Consolidated power supplyEquips high conversion efficiency power supply

Gold, and 2 power supply modules are standard for redundant configuration.(Max.4, hot plug Enables server management from remote site by server management

controller.Equips 4 DC output connectors and up to 4 server chassis can be connected

in 1 server chassis.

2. Power supply modules [std. 2 / max. 4 Power supply module [N8181-76F]

NOTE 2 power supply modules are standard for redundant

installed into 1 Consolidated PSU. Hot plug supported . The number of power supply modules required depends

4th Edition, April 2011NEC Corporation

. The number of power supply modules required dependsthe chassis installed. Refer the table of Total power

System Configuration GuideExpress5800/E110b-M

System configuration (Consolidated PSU)

Description

supply unit(1U)Equips high conversion efficiency power supply certified with 80 PLUS® Gold, and 2 power supply modules are standard for redundant configuration.(Max.4, hot plug supported)Enables server management from remote site by server management

Equips 4 DC output connectors and up to 4 server chassis can be connected

max. 4]76F] Power cord

Std. 2Max.4

redundant configuration. Up to 4 power supply modules can besupported.

depends on the number of the servers and the number of

4th Edition, April 2011 17

depends on the number of the servers and the number ofpower consumption and weight estimation

System configuration (Consolidated PSU)

3. Unit management (BMC, EXPRESSSCOPE Engine 2)

EXPRESSSCOPE Engine 2 1x Management LAN (100BASE-TX, 10BASE-T)

Managing unitMonitoring temperature /fan/voltage/power consumptionCollecting hardware event log

Stall monitoring/automatic reboot POST/BIOS Stall monitoring

Alerting

HW failure, Boot failure(by SNMP,E-Mail via LAN)

HW failure, Boot failure(via COM port (modem))

Remote console(via LAN)

POST/BIOS setup, DOS utility*3Boot screen *3Remote reset /power on–off of manament controller*3

Functions The functions are enabled regardless of operating

condition.

4th Edition, April 2011NEC Corporation

Remote control(via LAN)

Remote reset /power on–off of manament controller*3CLP (Command Line Protocol, DMTF compliant)Remote control via web browser(via LAN)Remote batchScheduling

Maintenance Maintenance utilityOthers Automatic IP address setting via DNS/DHCPGroup management Monitoring/controlling by the groupIndustry Standard IPMI (version)*1 The remote console feature is supported on the management*2 The remote power on feature is for managing the power of

not always power on. To power on the management controllerPSU.

*3 Available to manage via serial port

NOTE Remote KVM and Media License is not supported in EXPRESSSCOPE

Consolidated PSU

Management controller Management

The Consolidated PSU equips as standard feature to monitoring the unit from remote site.

Most functionsmanagement

To powersetting

System Configuration GuideExpress5800/E110b-M

System configuration (Consolidated PSU)

EXPRESSSCOPE Engine 2)

Standard

Consolidated PSU

EXPRESSSCOPE Engine 2(Standard)

Monitoring temperature /fan/voltage/power X

X

X

X

X

X *1X *1

off of manament controller*3 X *2

The functions are enabled regardless of operating

4th Edition, April 2011 18

off of manament controller*3 X *2CLP (Command Line Protocol, DMTF compliant) XRemote control via web browser(via LAN) X

X--

Automatic IP address setting via DNS/DHCP XX

2.0management controller installed in the Consolidated PSU.

of management controller. The management controller needcontroller is required for setting or maintaining the Consolidated

EXPRESSSCOPE Engine 2 of Consolidated PSU.

Management controllerThe Consolidated PSU equips the management controller as standard feature to monitoring the unit from remote site.

functions listed above can be supported if themanagement controller is powered off.

power on the management controller is required foror maintaining the Consolidated PSU.

System configuration (Consolidated PSU)

Total power consumption and weight estimation Please consult our sales representative if another estimation Total weigh indicates a total value of the weight of the following components:

• E110b-M server, Sever chassis(including rail kit), Consolidated PSU(including rail kit), blank panel, management kit(rear) , fan box, power supply modules, power cords, DC power cords

System configuration of E110b-M

AtomN4501GB memory

no-HDD

AtomN4502GB memory

no-HDD

AtomN4501GB memory

Total Weight 49kg 50kgNumber of powerSupply module(std.2/max.4)

2 2

Maximum power consumption

(100 VAC)

W 508W 567WVA 519VA 579VAA 5.2A 5.8A

Total weight and power consumption based on 20 E110b-

System configuration of E110b-M

AtomN4501GB memory

no-HDD

AtomN4502GB memory

no-HDD

AtomN4501GB memory

Total weight and power consumption based on 40 E110b-

4th Edition, April 2011NEC Corporation

System configuration of E110b-M

AtomN4501GB memory

no-HDD

AtomN4502GB memory

no-HDD

AtomN4501GB memory

Number of servers 80 74Total Weight 163kg 161kg

Number of powerSupply module(std.2/max.4)

4 4

Maximum power consumption

(100 VAC)

W 1938W 2041WVA 1978VA 2082VAA 19.8A 20.8A

Number of E110b-M server that can be installed in one Consolidated PSU configuration:

no-HDD no-HDDTotal Weight 88kg 88kg

Number of powerSupply module(std.2/max.4)

3 3

Maximum power consumption

(100 VAC)

W 985W 1104WVA 1005VA 1126VAA 10.1A 11.3A

System Configuration GuideExpress5800/E110b-M

System configuration (Consolidated PSU)

Total power consumption and weight estimationestimation is needed.

Total weigh indicates a total value of the weight of the following components:M server, Sever chassis(including rail kit), Consolidated PSU(including rail kit), blank panel, cable

) , fan box, power supply modules, power cords, DC power cords

AtomN4501GB memory

HDD

AtomN4502GB memory

HDD

AtomN4501GB memory

SSD

AtomN4502GB memory

SSD53kg 53kg 53kg 53kg

2 2 2 2

597W 657W 508W 567W609VA 670VA 519VA 579VA

6.1A 6.7A 5.2A 5.8A

-M servers, 1 server chassis and 1 Consolidated PSU:

AtomN4501GB memory

HDD

AtomN4502GB memory

HDD

AtomN4501GB memory

SSD

AtomN4502GB memory

SSD

-M servers, 2 server chassis and 1 Consolidated PSU:

4th Edition, April 2011 19

AtomN4501GB memory

HDD

AtomN4502GB memory

HDD

AtomN4501GB memory

SSD

AtomN4502GB memory

SSD70 63 80 74

170kg 165kg 179kg 175kg

4 4 4 4

2031W 2050W 1938W 2041W2072VA 2092VA 1978VA 2082VA

20.7A 20.9A 19.8A 20.8A

M server that can be installed in one Consolidated PSU configuration:

HDD HDD SSD SSD96kg 96kg 96kg 96kg

3 3 3 3

1163W 1282W 985W 1104W1187VA 1308VA 1005VA 1126VA

11.9A 13.1A 10.1A 11.3A

Supplementary Notes <General> Hard disk

Measurement units of the hard disk capacity are 1GB=1000compared with same capacity figures based on 1GB=1024

System Clock When stored at a low or high temperature, the system clock may largely deviate from the current time. Use

NTP client service to keep computer clock accurate.

EXPRESSBUILDER EXPRESSBUILDER (DVD media) includes the following:

Server Management Software : NEC ESMPRO Manager (Windows), NEC ESMPRO Agent User’s Guide for server, chassis, and Consolidated PSU

The express setup installation is not supported in the server.

Operating system For details as specifications and connections limited by OS, refer to this guide and hardware list“.

Processor The features of the Intel ® Atom™ processors supported in the server are as follows:

Category Official Name

64 bit Intel® 64 64 bit function

Energyconsumption

Enhanced Intel® SpeedStep® Technology, (Intel® Demand-Base Switching)

Power conservation technology that changes voltage and frequency according to processor load.

4th Edition, April 2011NEC Corporation

Performance Intel® Turbo Boost Technology Technology that boosts processor frequency.

Performance Intel® Hyper-Threading Technology A function that delivers threadon each processor core.

Virtualization Intel® Virtualization Technology Hardware (CPU)technology.

Security Intel® Execute Disable Bit Technology that helps prevent malicious attacks abusing buffer overflow errors.

Legend:X: Supported -: Not supported

System Configuration GuideExpress5800/E110b-M

Supplementary Notes <General>

Measurement units of the hard disk capacity are 1GB=10003B and 1TB=10004B. The capacity is less when compared with same capacity figures based on 1GB=10243B and 1TB=10244B.

When stored at a low or high temperature, the system clock may largely deviate from the current time. Use NTP client service to keep computer clock accurate.

EXPRESSBUILDER (DVD media) includes the following:Server Management Software : NEC ESMPRO Manager (Windows), NEC ESMPRO AgentUser’s Guide for server, chassis, and Consolidated PSU

The express setup installation is not supported in the server.

For details as specifications and connections limited by OS, refer to this guide and hardware list“.

The features of the Intel ® Atom™ processors supported in the server are as follows:

Feature Overview ProcessorAtom N450

64 bit function XPower conservation technology that changes voltage and frequency according to processor load.

X

4th Edition, April 2011 20

Technology that boosts processor frequency. -A function that delivers thread-level parallelism on each processor core. -

Hardware (CPU)-assisted virtualization technology. X

Technology that helps prevent malicious attacks abusing buffer overflow errors. X

Supplementary Notes <Flash FDD>

Flash FDD (N8160-86) overview

USB2.0 compliant FDD emulation feature equipped in the USB Flash drive.

Stick type. FD icon/capacity is printed for easy recognition.

Capacity: 1.44MB (FAT formatted) *Same as one FD(2HD)

Strap hole, Write protect switch.

Flash FDD is an alternative device of FDD using USB flash drive. This device can be used as boot device without additional driver. Also, automatically recognized by OS as a Floppy disk drive after connecting to USB port since this device supports Plug and Play.*1

*1: Support OS only

Intended uses of FDD substituted by Flash

Flash FDD

4th Edition, April 2011NEC Corporation

Intended uses of FDD substituted by Flash Flash FDD can be used instead of FDD

FDD if needed for your system.Intended use Description

Install

Manual installation Installation of Microsoft Windows Server 2003 R2 or previous Windows Server OS

Linux OS installation

Maintenance

BIOS/FW update Off line update of BIOS or some firmware

Express report service registration

Required when the set up of Express Report Service

Backup software When using disaster recovery option of CA ARCserve Backup on Microsoft Windows Server 2008 or later.When additional driver is needed for Backup Exec Intelligent Disaster Recovery option or disaster recovery of

Replacement/repair of Hardware

Backup/restore of HW information (Serial Number, etc.) when replacement or repair of Hardware.

Log collection, etc. System event log/System information collection when offline

System Configuration GuideExpress5800/E110b-M

Supplementary Notes <Flash FDD>

USB2.0 compliant FDD emulation feature

Stick type. FD icon/capacity is printed for easy

Flash FDD is an alternative device of FDD using USB flash drive. This device can be used as boot device without additional driver. Also, automatically recognized by OS as a Floppy disk drive after connecting to USB port since this device supports Plug and

Flash FDD

4th Edition, April 2011 21

Flash FDDFDD for the following uses. Arrange Flash

NotesInstallation of Microsoft Windows Server 2003 R2 or previous Windows Server OS

Create Windows OS OEM-DiskNot required for Windows Server 2008 or laterDepends on the distribution

Off line update of BIOS or some firmware Not required for the current models, because those support update by CD/DVD and online update.

Required when the set up of Express

When using disaster recovery option of CA Backup on Microsoft Windows

Not required on Windows Server 2003/2003 R2

When additional driver is needed for Backup Exec Intelligent Disaster Recovery option or disaster recovery of NetVault.

Not required when there is no additional driver

Backup/restore of HW information (Serial Number, etc.) when replacement or repair

Not required for the current models

System event log/System information When online, ESMPRO tool can collect System Event Log (SEL).

Copyright © NEC Corporation 2010. All rights reserved.• Microsoft and Windows Server are either registered trademarks or trademarks of Microsoft Corporation in the United States a• Intel and Intel Atom are registered trademarks or trademarks of Intel Corporation or its subsidiaries in the United States and other countries• Linux is a trademark of Linus Torvalds.• Red Hat is a registered trademark of Red Hat, Inc. in the U.S and other countries.• All other products, brands, or trade names used in this document are trademarks or registered trademarks of their respective holders.• Specifications and technical data are subject to change without notice.

NEC Express5800http://www.nec.com/express/

• Microsoft and Windows Server are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries.registered trademarks or trademarks of Intel Corporation or its subsidiaries in the United States and other countries.

U.S and other countries.trade names used in this document are trademarks or registered trademarks of their respective holders.