syndeck sa1290fc underlayment - ers marineersmarine.com/public/files/syndeck sa1290fc underlayment...
TRANSCRIPT
SAFETY DATA SHEETaccording to REGULATION (EC) No 1907/2006
1. IDENTIFICATION OF THE SUBSTANCE/PREPARATION AND OF THECOMPANY/UNDERTAKING
Product identifier
Product trade name: SynDeck SA1290FC Underlayment
Internal code: SA1290FCE
Use of the substance/preparation
Application: Primecoat
Company/undertaking identification
Supplier: Epmar Corporation13210 E. Barton CircleSanta Fe Springs, CA 90605-3254Phone: 562-946-8781FAX: 562-944-9958E-MAIL: [email protected]:[email protected](For Health and Safety Questions)
Informing department: Department for Safety, Health, Environmental and Quality (SHEQ)Phone: +31 297 544568E-mail: [email protected]
Technical contact point: Epmar Corporation13210 E. Barton CircleSanta Fe Springs, CA 90605-3254Phone: 562-946-8781FAX: 562-944-9958E-MAIL: [email protected]:[email protected](For Health and Safety Questions)
Emergency telephone number: +31 30 2748888 - Nationaal Vergiftigingen Informatie Centrum (NL)This number is only accessible for the doctor in case of accidental poisoning.
________________________________________________________________________________________
Revision date: 03/03/2011
SDS code: SA1290FCE
Print date: 03/03/2011
Product name: SynDeck SA1290FCUnderlayment
Page 1 of 9
Version: 1
________________________________________________________________________________________2. HAZARDS IDENTIFICATION
Indication of danger:N - Dangerous for the environment.Xi - Irritant.
Most important hazards:R43 - May cause sensitization by skin contact.R68 - Possible risks of irreversible effects.R36/38 - Irritating to eyes and skin.R51/53 - Toxic to aquatic organisms, may cause long-term adverse effects in the aquatic environment.
3. COMPOSITION/INFORMATION ON INGREDIENTS
Chemical nature of the substance or preparation:Product is a mixture of:
resin, additives.
HAZARDOUS COMPONENTS
Components CAS No. EC No. Weight % ClassificationEpoxy resin 25068-38-6 NLP 500-033-5 30 - 100 N;R51/53
R43Xi;R36/38
Oxirane, mono[(C12-14-alkyloxy)methyl]derivs.
68609-97-2 271-846-8 5 - 10 R43Xi;R38
N;R51/53Oxirane,((2-methylphenoxy)methyl)- 2210-79-9 218-645-3 1 - 5 Muta. Cat.3;R68
N;R51/53R43
Xi;R38
4. FIRST AID MEASURES
General advice: If symptoms persist, call a physician.
Inhalation: In the case of inhalation of aerosol/mist consult a physician if necessary.
Skin contact: Remove and wash contaminated clothing before re-use
Eye contact: Rinse immediately with plenty of water, also under the eyelids, for at least 15minutes.
Ingestion: Rinse mouth.
________________________________________________________________________________________
Version: 1
SDS code: SA1290FCE Product name: SynDeck SA1290FCUnderlayment
Revision date: 03/03/2011
Page 2 of 9
Print date: 03/03/2011
________________________________________________________________________________________
Note to physician: Treat symptomatically.
5. FIRE-FIGHTING MEASURES
Flash Point (°C): 93
Flash point method: COC
Explosion limits:- lower: Not applicable
- upper: Not applicable
Suitable extinguishing media: Use dry chemical, CO2, water spray or "alcohol" foam
Extinguishing media which mustnot be used for safety reasons:
High volume water jet
Special exposure hazards arisingfrom the substance orpreparation itself, combustionproducts, resulting gases:
Carbon monoxide (CO)Phosphor oxides (POx)
Specific hazards: No information available
Unusual hazards: None known
Special protective equipment forfire-fighters:
Standard procedure for chemical fires.
Specific methods: Collect contaminated fire extinguishing water separately. This must not bedischarged into drains.
6. ACCIDENTAL RELEASE MEASURES
Personal precautions: Ensure adequate ventilation.
Environmental precautions: Do not flush into surface water or sanitary sewer system.
Methods for cleaning up: Soak up with inert absorbent material (e.g. sand, silica gel, acid binder, universalbinder, sawdust).
7. HANDLING AND STORAGE
Handling
Technicalmeasures/precautions:
Provide sufficient air exchange and/or exhaust in work rooms.
Safe handling advice: In case of insufficient ventilation, wear suitable respiratory equipment.
Storage
Technical measures/storageconditions:
Store at room temperature in the original container
________________________________________________________________________________________
SDS code: SA1290FCE
Print date: 03/03/2011
Product name: SynDeck SA1290FCUnderlayment
Version: 1
Page 3 of 9
Revision date: 03/03/2011
________________________________________________________________________________________
Incompatible products: No special restrictions on storage with other products
Safe storage temperature: 15 - 50 °C
8. EXPOSURE CONTROLS/PERSONAL PROTECTION
Exposure Limit Values
Further information: None
Exposure controls
Occupational exposurecontrols
Engineering measures: Ensure adequate ventilation.
Respiratory protection: In case of insufficient ventilation wear suitable respiratory equipment.
Hand protection: Neoprene gloves
Eye protection: Safety glasses
Skin and body protection: Long sleeved clothing
Environmental exposurecontrols
Recommendations: None
9. PHYSICAL AND CHEMICAL PROPERTIES
General information
Physical state: LiquidColor BlueOdor Mild
Important health, safety and environmental information
Explosive Limits:
________________________________________________________________________________________
Boiling point/range (°C): >100
Version: 1
ASTM D 1120
Result
Flash Point (°C): 93 COCFlammability (solid/gas): No data available
Method
-
pH: Not applicable
Revision date: 03/03/2011
ASTM D 1293
Print date: 03/03/2011
SDS code: SA1290FCE
at 100 (%)
Product name: SynDeck SA1290FCUnderlayment
Page 4 of 9
Property
-
________________________________________________________________________________________
Solubility:
Other information
10. STABILITY AND REACTIVITY
Stability:Stable under recommended storage conditions.
Conditions to avoid:None known
Materials to avoid:Strong oxidizing agents
Hazardous decomposition products:None under normal use
Hazardous Reactions:Not applicable
11. TOXICOLOGICAL INFORMATION
Information on toxicologicaleffects
LD50 (oral/rat): > 2000 mg/kg (calculated)
Long-term effects
________________________________________________________________________________________
Property Result Method
at 15 (°C)
Miscibility: Not determined -Conductivity: Not determined
- lower limit: No data available
-
Print date: 03/03/2011
Melting point/range (°C): <0 -
- water solubility:
Gas group: Not determined
Not soluble
-
-
Auto-ignition temperature (°C): Not determined
-
-Molecular weight: Not determined
Version: 1
-
- fat solubility:
Decomposition temperature (°C): Not determined
Not determined
-
-
Oxidising properties: No data available
Partition coefficient (n-octanol/water):
Not determined -
Viscosity: 2000 (cP)
-
ASTM D 445
- upper limit:
at 25 (°C)
Vapor pressure:
-
No data available
Vapour density: No data available
No data available
-
-
Evaporation rate: No data available -
Revision date: 03/03/2011
SDS code: SA1290FCE
Relative density: 1.15 (g/cm³)
Product name: SynDeck SA1290FCUnderlayment
Page 5 of 9
-
ASTM D 1298
________________________________________________________________________________________Other long-term effects: No data available
Local effects
Oral: No data available
Inhalation: No data available
Skin irritation: No skin irritation
Eye irritation: Contact with eyes may cause irritation
Sensitization: May cause sensitization of susceptible persons
Additional toxicologicalinformation:
None
12. ECOLOGICAL INFORMATION
Ecotoxicity
Inhibitory effects: None known
Behaviour in sewage treatmentplants:
None known
Mobility
Distribution toenvironmental compartments:
No data available
Surface tension: No data available
Persistence and degradability
BOD Not determined
Potential degradation: Not determined
Degradation half life: Not determined
Degradation in sewage treatmentplants:
Not determined
Bioaccumulative potential
Bioaccumulation: Not available
Other adverse effects
Ozone depletion potential(R-11 = 1):
Not determined
Photochemical ozone creationpotential:
Not determined
________________________________________________________________________________________
Print date: 03/03/2011 Version: 1
Oxirane,((2-methylphenoxy)methyl)-
SDS code: SA1290FCE
Revision date: 03/03/2011
Product name: SynDeck SA1290FCUnderlayment
Page 6 of 9
Ecotoxicity - Fish Species Data: LC50 (Salmo gairdneri - 96h) = 2.8 - 5.6 mg/L
________________________________________________________________________________________Global warming potential: Not determined
13. DISPOSAL CONSIDERATIONS
Waste from residues/unusedproducts:
Dispose of in accordance with local regulations
Contaminated packaging: Dispose of as unused product.
Methods for cleaning up: No information available
EWC waste disposal No.: 08 01 11*
14. TRANSPORT INFORMATION
ADRUN nr: 3082Class: 9Label: 9Classification code: M6Packing group: IIIProper shipping name: ENVIRONMENTALLY HAZARDOUS SUBSTANCE, LIQUID, N.O.S.Limited quantity: LQ7Shipping description: UN 3082 ENVIRONMENTALLY HAZARDOUS SUBSTANCE, LIQUID, N.O.S.
(Contains epoxy resin, Aliphatic C12-C14 glycidyl ether, O-cresyl glycidylether), 9, III,(E)
15. REGULATORY INFORMATION
EC classification and labelling (67/548/EEC - 1999/45/EC)Indication of danger: N - Dangerous for the environment.
Xi - Irritant.
R phrases:R43 - May cause sensitization by skin contact.R68 - Possible risks of irreversible effects.R36/38 - Irritating to eyes and skin.R51/53 - Toxic to aquatic organisms, may cause long-term adverse effects in the aquatic environment.
S phrases:S57 - Use appropriate containment to avoid environmental contamination.S60 - This material and its container must be disposed of as hazardous waste.S61 - Avoid release to the environment. Refer to special instructions/Safety data sheets.S24/25 - Avoid contact with skin and eyes.S36/37 - Wear suitable protective clothing and gloves.
________________________________________________________________________________________
SDS code: SA1290FCE
Revision date: 03/03/2011
Product name: SynDeck SA1290FCUnderlayment
Page 7 of 9
Print date: 03/03/2011 Version: 1
________________________________________________________________________________________15. REGULATORY INFORMATION
National regulations
Water endangering class - WGK(D):
2 (S)
Maladies Professionnelles (F): Not listed
EC EINECS/ELINCS/NLP list: This product complies with EINECS
16. OTHER INFORMATION
List of relevant R phrases
R38 - Irritating to skin.R43 - May cause sensitization by skin contact.R68 - Possible risks of irreversible effects.
R36/38 - Irritating to eyes and skin.R51/53 - Toxic to aquatic organisms, may cause long-term adverse effects in the aquatic environment.
Further information:
Training advice: See our technical data sheet.
Concentration to be used:- min.(%): 100- max. (%): 100
Technical contact point: Epmar Corporation13210 E. Barton CircleSanta Fe Springs, CA 90605-3254Phone: 562-946-8781FAX: 562-944-9958E-MAIL: [email protected]:[email protected](For Health and Safety Questions)
Prepared by: Department for Safety, Health and Environmental Affairs Department - Europe
Sources of key data used tocompile the data sheet:
Material safety data sheets of the ingredients.
________________________________________________________________________________________
Print date: 03/03/2011
SDS code: SA1290FCE
Version: 1
Product name: SynDeck SA1290FCUnderlayment
Page 8 of 9
Revision date: 03/03/2011
________________________________________________________________________________________DisclaimerThis product's safety information is provided to assist our customers in assessing compliance withsafety/health/environmental regulations. The information contained herein is based on data available to us and isbelieved to be accurate. However, no warranty of merchantability, fitness for any use, or any other warranty is expressedor implied regarding the accuracy of this data, the results to be obtained from the use thereof, or the hazards connectedwith the use of the product. Since the use of this product is within the exclusive control of the user, it is the user'sobligation to determine the conditions for safe use of the product. Such conditions should comply with all regulationsconcerning the product. Quaker Chemical Corporation ("Quaker") assumes no liability for any injury or damage, direct orconsequential, resulting from the use of this product unless such injury or damage is attributable to the gross negligenceof Quaker.
End of Safety Data Sheet
________________________________________________________________________________________
Version: 1
SDS code: SA1290FCE Product name: SynDeck SA1290FCUnderlayment
Revision date: 03/03/2011
Page 9 of 9
Print date: 03/03/2011