symbols - beghelli hungary - biztonsági világítás ...beghelli.hu/ins/825116000_illum.pdf · en...
TRANSCRIPT
825.116.00020152015
SYMBOLSSYMBOLS
SMARTDRIVER
SMARTREVOLUTION
SM
AR
TD
RIV
ER
DARKLIGHT
Low luminosity optics Visual comfort is obtainedwith correct lighting design, using fixtures in whichthe control of the luminous flux reduces direct andreflected glare. Beghelli propose 5 classifications oftheir flux-control optics.
Low luminosity optics, less than 200 cd/m for angles greater than60 longitudinal and transverse, and for radial angles compliant withEN 12464-1 limit 1000cd/m
Low luminosity optics, less than 500 cd/m for angles greater than65 longitudinal and transverse, and for radial angles compliant withEN 12464-1 limit 1000cd/m
Low luminosity optics compliant with standard EN 12464-1 limit1000cd/m
Low luminosity optics compliant with standard EN 12464-1 limit1500cd/m
Low luminosity optics compliant with standard EN 12464-1 limit3000cd/m
DKL3
DKL4
DKL5
DKL2
DKL1
LIGHT SOURCES SUPPLIED WITH BEGHELLI FIXTURES
Beghelli products must be used with light sources complying with the provisions of the mostrecent laws in terms of energy efficiency and environmental impact. When supplied with thelighting fixtures, the proposed lamps supplied comply with the provisions of the respectivelaws (reg 244/09, 245/09 and 1194/2012).
European quality mark
Italian safety mark
GSM transmission of the energy saving data tothe Beghelli Services database
Built-in FH-DSSS radio transceiver operating inthe band 2.400-2.863 GHz
IP65 Fixtures with class II insulation level.Fixtures without this symbol are to be considered class I.
L80B20 indicator of product flux maintenance. It specificallyindicates that, within the number of hours specified on the
product data sheet, 80% of the number of LEDs will not losemore than 20% of the flux.
The number of hours specified on the product data sheetrefers to the most critical product, therefore in conditions oflower power and at a working temperature lower than 25C
a substantial increase of the product performance maybe expected.
SDCM - Standard Deviation Colour Matching is thestandard deviation of the correspondence of colours
between two lamps. With a value of 3 SDCM or less, thelamps emit light with a colour that is difficult to perceive
with the human eye.
Protection Grade against external factors(According to CEI EN 60598-1)
IK09 Protection Grade against impact of the fixturecomplying with test methods (According to EN 50102)
SmartDriver: Dimmable control gear for LEDsources which has two connectors for as manyoptional devices that modify the characteristicsof the fixture. The first connector is exclusivelyfor connection of the Autodimmer Sensor, thesecond is for a Building Automation Module
chosen from the SmartDriver series. Alternativemodules that can be connected: BuildingAutomation Module, Dali Module - 0/10W,Grande Esco Italia Module, Vision Module.
IP40IP41
Protection Grade against external factors of a part ofthe fixture (housing, optics) (according to
CEI EN 60598-1)
HACCP
Fixtures with absence of potentially contaminatingelements, suitable for use in places subject to HACCP
audit (food supply chain).
Devices complying with European Communitydirectives
Indicates Resistance Temperature of theproduct to the incandescent wire test
(CEI EN 60598-1)850C
M Lighting fixtures with soft light
Technologically advanced products, designedspecifically with a view to energy saving, recycling at
the end of their working life, and reduced periodic wearof parts during use.
Fixtures with product integrity ensured according toStandard UNI 9554, DIN 18031-3.
Suitable for installation in gymnasiums
GGYM
Fixture intended for use with a risk of explosion due to thepresence of combustible powders or explosive substances
according to theATEX Directive (see facing page)
UVFixtures characterized by particular resistance
to UV radiations
UV-OILFixtures with particular resistance to UV radiation and
aggression by mineral oils
Line of fixtures in sheet steel and toughened glass withhigh characteristics of resistance to external agents
LightingSymbols and approvals
Lighting fixtures with respectively directand indirect light
The light fixtures in the Stella Polare LED line areequipped with particularly performing diffusers and
optics. In a comparison with standard fixtures on themarket, with a greater luminous flux (lumen), BeghelliLuce Utile fixtures ensure up to 20% more illumination
on the work surface (lux).This greater efficiency is expressed in an equivalent
energy saving.
Centralized low-voltage safety system and fixtures ofthe SICURO 24 series
(for availability contact the Beghelli sales network)
SLGS
GB int_cop SPSD_01 21/05/15 14:58 Pagina 4
DARKLIGHT
Low luminosity optics Visual comfort is obtainedwith correct lighting design, using fixtures in whichthe control of the luminous flux reduces direct andreflected glare. Beghelli propose 5 classifications oftheir flux-control optics.
Low luminosity optics, less than 200 cd/m for angles greater than60 longitudinal and transverse, and for radial angles compliant withEN 12464-1 limit 1000cd/m
Low luminosity optics, less than 500 cd/m for angles greater than65 longitudinal and transverse, and for radial angles compliant withEN 12464-1 limit 1000cd/m
Low luminosity optics compliant with standard EN 12464-1 limit1000cd/m
Low luminosity optics compliant with standard EN 12464-1 limit1500cd/m
Low luminosity optics compliant with standard EN 12464-1 limit3000cd/m
DKL3
DKL4
DKL5
DKL2
DKL1
LIGHT SOURCES SUPPLIED WITH BEGHELLI FIXTURES
Beghelli products must be used with light sources complying with the provisions of the mostrecent laws in terms of energy efficiency and environmental impact. When supplied with thelighting fixtures, the proposed lamps supplied comply with the provisions of the respectivelaws (reg 244/09, 245/09 and 1194/2012).
European quality mark
Italian safety mark
GSM transmission of the energy saving data tothe Beghelli Services database
Built-in FH-DSSS radio transceiver operating inthe band 2.400-2.863 GHz
IP65 Fixtures with class II insulation level.Fixtures without this symbol are to be considered class I.
L80B20 indicator of product flux maintenance. It specificallyindicates that, within the number of hours specified on the
product data sheet, 80% of the number of LEDs will not losemore than 20% of the flux.
The number of hours specified on the product data sheetrefers to the most critical product, therefore in conditions oflower power and at a working temperature lower than 25C
a substantial increase of the product performance maybe expected.
SDCM - Standard Deviation Colour Matching is thestandard deviation of the correspondence of colours
between two lamps. With a value of 3 SDCM or less, thelamps emit light with a colour that is difficult to perceive
with the human eye.
Protection Grade against external factors(According to CEI EN 60598-1)
IK09 Protection Grade against impact of the fixturecomplying with test methods (According to EN 50102)
SmartDriver: Dimmable control gear for LEDsources which has two connectors for as manyoptional devices that modify the characteristicsof the fixture. The first connector is exclusivelyfor connection of the Autodimmer Sensor, thesecond is for a Building Automation Module
chosen from the SmartDriver series. Alternativemodules that can be connected: BuildingAutomation Module, Dali Module - 0/10W,Grande Esco Italia Module, Vision Module.
IP40IP41
Protection Grade against external factors of a part ofthe fixture (housing, optics) (according to
CEI EN 60598-1)
HACCP
Fixtures with absence of potentially contaminatingelements, suitable for use in places subject to HACCP
audit (food supply chain).
Devices complying with European Communitydirectives
Indicates Resistance Temperature of theproduct to the incandescent wire test
(CEI EN 60598-1)850C
M Lighting fixtures with soft light
Technologically advanced products, designedspecifically with a view to energy saving, recycling at
the end of their working life, and reduced periodic wearof parts during use.
Fixtures with product integrity ensured according toStandard UNI 9554, DIN 18031-3.
Suitable for installation in gymnasiums
GGYM
Fixture intended for use with a risk of explosion due to thepresence of combustible powders or explosive substances
according to theATEX Directive (see facing page)
UVFixtures characterized by particular resistance
to UV radiations
UV-OILFixtures with particular resistance to UV radiation and
aggression by mineral oils
Line of fixtures in sheet steel and toughened glass withhigh characteristics of resistance to external agents
LightingSymbols and approvals
Lighting fixtures with respectively directand indirect light
The light fixtures in the Stella Polare LED line areequipped with particularly performing diffusers and
optics. In a comparison with standard fixtures on themarket, with a greater luminous flux (lumen), BeghelliLuce Utile fixtures ensure up to 20% more illumination
on the work surface (lux).This greater efficiency is expressed in an equivalent
energy saving.
Centralized low-voltage safety system and fixtures ofthe SICURO 24 series
(for availability contact the Beghelli sales network)
SLGS
GB int_cop SPSD_01 21/05/15 14:58 Pagina 4
xcbxfbxvbcv
1
Luminaires in the lighting world . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
Fixtures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
Technical annex . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .85
Self-adapting activation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .86
Centralized activation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .87
Building automation lighting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .88
Detection of presences . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .90
Dynamic detection of presences: Vision System . . . . . . . . . . . . . . .92
Devices for building automation implementation
Building automation control unit . . . . . . . . . . . . . . . . . . . . . . . . . . . .94
Building automation PC software . . . . . . . . . . . . . . . . . . . . . . . . . . .95
Building automation radio interface . . . . . . . . . . . . . . . . . . . . . . . . . .95
Building automation radio transmitter interface . . . . . . . . . . . . . . .96
Building automation radio receiver interface . . . . . . . . . . . . . . . . . .96
Building automation radio module . . . . . . . . . . . . . . . . . . . . . . . . . . .97
DALI/0-10V module . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .97
Grande ESCo Italia radio module . . . . . . . . . . . . . . . . . . . . . . . . . . . . .98
Vision module . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .98
Vision Radio module . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .99
Acciaio AutoDimmer Sensor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .99
AutoDimmer Sensor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .100
AutoDimmer Box Sensor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .100
Contents
2
The highly technological identity and the value of the Beghellibrand are fully expressed in the project for the renewal ofemergency fixture light sources and now also of lighting. In theStella Polare project, the use of high-efficiency LEDs and acalibrated light beam produces adequate lighting while maintainingvery high energy saving.
The Luce Utile (Useful Light) philosophy springs from the need toobtain an ideal beam of light for lighting and emergency lightingthat gives the maximum possible light output. The optics havebeen specially designed to solve lighting problems on the groundwith a smaller number of fixtures, respecting the valuesenvisaged by the regulations in force.
After the great success of Stella Polare LED Emergency, we are
proud to present on the market the new Beghelli proposal for
ordinary, technical and industrial lighting, LED.
And so the Stella Polare LED Light line is born, which exploits the
continuous efforts our group has always dedicated to the search for
new ideas, maximum efficiency in optical and lighting performance,
with consequent important energy saving values.
We are certain that all experts in the sector designers, architects,
wholesalers and installers will recognise in the Stella Polare LED
Emergency and now in the Lighting project, the innovative spirit that
animates us, and will propose its advantages to their interlocutors
and customers to improve the quality of their life.
Gian Pietro Beghelli
LuceUtile ProjectIt does not matter how much light a fixture emits.What makes it important is what its light shows,
transforming it into a useful lighting fixture.All the light outside the controlled beam is just a waste of energy.
We give even more valueto Savings Each appliance can be fitted with a specificsystem for recording energy consumptiondata, designed to supply the necessaryinformation to bodies authorized by theEnergy Service Company (ESCo) in order toobtain Energy Saving Certificates (WhiteCertificates). Grande ESCo Italia has all thenecessary certifications and the technologycompatible with the Stella PolareSmartDriver system equipped with theGrande ESCO Italia Module.
From today, all the fixtures inthe Stella Polare LED line areequipped with SmartDriver,an electronic control gear ofthe latest generation. A newpoint of arrival for electronicintelligence linked to thelighting world.
Focus on functional expandabilityand high lighting performance:the management of every singlefixture can be customized byintegrating the appropriate SDbuilding automation Sensors orModules which can be individuallyconnected to the SmartDriver.
3
Luminaires in theemergencyworld
Building automation intelligenceThe system allows specific luminousscenarios to be set, linked to everydaysituations, or specially studied for carrying outparticular activities. The scenarios can beactivated both locally, with the BuildingAutomation Control unit connected toa PC, and in remote mode through a Webinterface, a Smartphone or a Tablet
Wireless controlWe reproduce all the functions of the mostmodern lighting systems, avoiding the layingof additional cables or BUS (e.g. DALI). Themodularity of the SmartDriver system allowsthe function to be activated with only theconnection of the Building AutomationModule, equipped with a radio antennaand programmed to activate as soon as it isconnected.
Self-adapting dimmerEach SmartDriver appliance, equipped withan Autodimmer Sensor, becomesautonomous in its basic functions: it managesthe lighting by automatically regulating theluminous intensity according to the natural orartificial light already present in theenvironment, with energy savings of up to30% greater than LED fixtures with a fixedlight intensity.
Dynamic detection of presences
A colour camera on board the appliance forthe active and multidimensional detection ofpresences frames the work area anddivides it into quadrants, individuallyconnected to automatic actions on thelighting system, given by the movement ofthe people. This exclusive characteristicpresent in the Vision Module allows thesystem to respect the Standard for theLighting of Workplaces UNI EN 12464-1. Theimages recorded can be downloaded bythe Building Automation Control unit.
SMARTDRIVER
Total compatibility with Building Automation
The SmartDriver project allows a dialoguewith other communication protocols like theDALI. The special DALI Module / 0-10Vallows both DALI interfacing and 0-10Vanalogue dimming with direct control.
4
5
FIX
TU
RE
S
Contents
IP66Lighting fixtures
F250/400 LEDpage 60
P236/P258 LEDpage 20
IP66
IP20
D226 LEDpage 38
IP20
D170/1150 LEDpage 36
IP20
D170/1150 LED ADJUSTABLEpage 48
IP44IP20
IP20
ZOOM LED - wall, ceilingpage 30
IP40
ZOOM LED - trackpage 28
IP40
H250/400 LEDpage 54
IP66
ACCIAIO ECO LEDpage 10
WW135/170 LEDpage 42
IP44IP20
M600 I418 LEDpage 14
IP20IP66
ACCIAIO TOP LED ATEXpage 8
IP20SmartDriver control devices and Building Automation lighting
BUILDING AUTOMATION RADIO TRANSMITTER INTERFACEpage 96
IP20
VISION RADIO MODULEpage 99
IP20
BUILDING AUTOMATION RADIO RECEIVERINTERFACEpage 96
IP20
BUILDING AUTOMATION CONTROL UNITpage 94
BUILDING AUTOMATION PC RADIO INTERFACEpage 95
IP20
F50 LEDpage 72
IP66
FH 70/150 LEDpage 66
IP66
New
S70/100/150 LEDpage 78
IP66
New
New
New New New
SMARTDRIVER
SOFTWAREDOMOTICO
SD BUILDING AUTOMATION SOFTWAREpage 95
IP20
New
New
IP20
BUILDING AUTOMATION RADIO MODULEpage 97
IP20
GRANDE ESCO ITALIA RADIO MODULEpage 98
IP20
DALI MODULE / 0-10Vpage 97
IP20
ACCIAIO AUTODIMMER SENSORpage 99
AUTODIMMER SENSORpage 100
IP20
AUTODIMMER SENSOR BOXpage 100
IP20
New New
New
New
New New
VISION MODULEpage 98
IP20
New
New
New
6
7
Excellent performance for LEDlighting in the tertiary and
industrial sector. The structuralsimplicity of Acciaio LED,combined with technicalmaterials such as splined
technopolymers and toughenedglass, make it a product suitable
for installation in particularlydemanding conditions,
thanks to protection gradesIP66 and IK09.
The whole allows the projection,through the microprismatic
crystal, of a highly technologicallouvre specially designed for
high-efficiency LEDs, to ensurethe maximum of light outputwithout glare. The innovativehead with screw cap allowseasy installation and easyconnection with specificaccessories such as the
intelligent light sensor or the LEDemergency module with built-in
source and inverter.
Acciaio LEDsturdy and intelligent
FIX
TU
RE
S
SPECIAL VARIATIONS: COLOUR RENDERING 90 - COLOUR TEMPERATURE ON REQUEST - WITH THREE-PHASE THROUGH WIRING - WITH POLYCARBONATE DIFFUSER (HACCP)Contact the Beghelli sales network
8
acciaio top leD atexWaterproof ceiling fitting
Acciaio Top LED Atex is the reply to the request for products with ahigh technological content for particularly demanding applications inhigh-risk areas. The steel housing and glass diffuser present bothexcellent mechanical resistance (IK09) and resistance to aggressivechemical agents. In the industrial field, it is ideally used in installationsin environments with an explosive atmosphere, caused either byalterations of a gaseous type or by the presence of combustiblepowders suspended in the air, since it already complies withStandard ATEX 94/9/EC for zones 02 and 22.The optic system is composed of a diffuser subdivided into 15 cells foroptimal light distribution, and a special microprismatic glass with very highlight transmittance for greater visual comfort.Acciaio Top LED Atex is suitable for heavy-duty use even in outdoorenvironments directly exposed to inclement weather: it is designed toresist mechanical vibrations and electromagnetic disturbances typicalof industrial environments.
General characteristics
Equivalent power* 2x80 W
Power supply 230Vac 10% 50/60Hz176-276 Vdc
Standard EN 60598-1, EN 60598-2-1, EN 60598-2-22 (fundamentalrequirements), UNI9554:1989, DIN 18032-3:1997-04, EN 62471(Photobiological hazard), ATEX 94/9/EC
Protection grade IP66
Working temperature -20C +40C
Mountings ceiling, suspension, electrified rail
Electronic gear Electronic SD (cos j 0.96)Electronic with intelligent dimming
Housing polyester powder coated sheet steel RAL 7035
Head Caps Technopolymer PC+PBT
Louvre Wide anti-glarealuminium
Diffuser microprismatic toughened glass with high transmittance
MTBF Control gear** 65.000 h
Luminous flux >60.000 (L80B20)maintenance**
Colour tolerance 3 SDCM
* Equivalent power for comparison with fluorescent tube fixtures** At a reference working temperature of 25C - Cable gland M20
15018 KIT ATEX ACCIAIO ECO
Accessories installed on the fixtureOrder Code Description
20082 MOD EM ACC LED/T5 TR SE1NRM20085 MOD EM ACC LED/T5 AT/LG SE1/3H 20086 MOD EM ACC LED/T5 LGFM SE 1/3H 20113 WIDE ACC DIFFUSER 150017220 INV LED SLGS SICURO 24V15019 INPUT DOUBLE COUPLING M20
Accessories to be ordered separatelyOrder Code Description
Power* Dimensions (mm) WeightW L L2 B H max kg
2x80 1565 1625 108 90 3.9
L
H
B
L2
H
B
with external LED module for emergency lighting
20102 BUILDING AUTOMATION CONTROL UNIT 20104 BUILDING AUTOMATION RADIO TRANSMITTER INTERFACE15020 ACCIAIO AUTODIMMER SENSOR15022 BUILDING AUTOMATION RADIO MODULE15024 DALI MODULE / 0-10V15025 GRANDE ESCO ITALIA RADIO MODULE15027 ACCIAIO VISION MODULE 3MT 15028 ACCIAIO VISION MODULE 6MT
Building automation to be ordered separately Order Code Description
SMARTDRIVER
SMARTREVOLUTION
GGYMIP66
UV-OIL 960C
IK09230V50Hz
SLGS
SD BUILDING AUTOMATION MODULES INDIVIDUALLY CONNECTED TO THE BEGHELLI SMARTDRIVER
BuildingAutomationmodule
Grande ESCO Italia module Vision module
DALI / 0-10Vmodule
Autodimmersensor
9
FIX
TU
RE
S
Acciaio top LED Atex SmartDriver electronic reactor
A280ESD ACCIAIO TOP LED 2X80 SD 4K 68 4000 K >80 74 180 10440 8100 A++ 110
Power LED Colour CRI Absorption Flux of LEDs Flux of * Energy LuminousOrder Code Description W temperature K Max W NLEDs lm (Tj=25C) Fixture lm Class efficiency lm/WPower* W
2x80
* Indicative power for comparison with fluorescent tube fixtures
MOUNTING ON ELECTRIFIED RAIL SUSPENDED MOUNTING
20082 MOD EM ACC LED/T5 TR SE1NRM to be ordered separately
20085 MOD EM ACC LED/T5 AT/LG SE1/3H to be ordered separately
20086 MOD EM ACC LED/T5 LGFM SE 1/3H to be ordered separately
EXTERNAL LED MODULE FOR EMERGENCY LIGHTING
20113 WIDE DIFFUSER ACCIAIO 1500 to be ordered separately
MOUNTING FOR EMITTING WIDE LIGHT
Standard optic Wide optic
Diagramma polarePolar Diagram
* WHEN THE LUMEN DONT COUNT
The light fixtures in the Stella Polare LED line are equipped withparticularly performing diffusers and optics. In a comparison withstandard fixtures on the market, with a greater luminous flux (lumen),Beghelli Luce Utile fixtures ensure up to 20% more illumination on thework surface (lux). This greater efficiency is expressed in an equivalentenergy saving.
SPECIAL VARIATIONS: COLOUR RENDERING 90 - COLOUR TEMPERATURE ON REQUEST - WITH THREE-PHASE THROUGH WIRING - WITH POLYCARBONATE DIFFUSER (HACCP)Contact the Beghelli sales network
10
acciaio eco leDWaterproof ceiling fitting
Acciaio Eco LED is the reply to the request for products with a hightechnological content for particularly demanding applications in high-risk areas. The steel housing and glass diffuser present both excellentmechanical resistance (IK09) and resistance to aggressive chemicalagents. In the industrial field, it is ideally used in installations inenvironments with an explosive atmosphere, caused either byalterations of a gaseous type or by the presence of combustiblepowders suspended in the air (according to Standard ATEX 94/9/ECfor zones 02 and 22).The optic system is composed of a diffuser subdivided into 12 cells foroptimal light distribution, and a special microprismatic glass with very highlight transmittance for greater visual comfort.Acciaio Eco LED is suitable for heavy-duty use even in outdoorenvironments directly exposed to inclement weather: it is designed toresist mechanical vibrations and electromagnetic disturbances typicalof industrial environments.
General characteristics
Equivalent power* 1x36, 2x36, 1x58, 2x58 W
Power supply 230Vac 10% 50/60Hz 176-276 Vdc(only for SD versions)
Standard EN 60598-1, EN 60598-2-1, EN 60598-2-22 (fundamentalrequirements), UNI9554:1989, DIN 18032-3:1997-04, EN 62471(Photobiological hazard), ATEX 94/9/EC
Protection grade IP66
Working temperature -20C +40C
Mountings ceiling, suspension, electrified rail
Electronic gear Electronic SD with intelligent dimming(cos j 0.96)
Housing polyester powder coated sheet steel RAL 7035
Head Caps Technopolymer PC+PBT
Louvre Wide anti-glarealuminium
Diffuser microprismatic toughened glass with hightransmittance
MTBF Control gear** 65.000 h
Luminous flux >60.000 (L80B20)maintenance**
Colour tolerance 3 SDCM
*Equivalent power for comparison with fluorescent tube fixtures** At a reference working temperature of 25C
Power* Dimensions (mm) WeightW L L2 B H max kg
1x36 1225 1285 108 90 3.2
2x36 1225 1285 108 90 3.2
1x58 1225 1285 108 90 3.2
2x58 1225 1285 108 90 3.2
L1
H
B
L
H
B
L2
H
B
cablaggio passante
con testata di emergenza LED
L1
H
B
L
H
B
L2
H
B
cablaggio passante
with external LED module for emergency lighting
20102 BUILDING AUTOMATION CONTROL UNIT20104 BUILDING AUTOMATION RADIO TRANSMITTER INTERFACE15020 ACCIAIO AUTODIMMER SENSOR15022 BUILDING AUTOMATION RADIO MODULE15024 DALI MODULE / 0-10V15025 GRANDE ESCO ITALIA RADIO MODULE15027 ACCIAIO VISION MODULE 3MT 15028 ACCIAIO VISION MODULE 6MT
Building automation to be ordered separately Order Code Description
20082 MOD EM ACC LED/T5 TR SE1NRM 20085 MOD EM ACC LED/T5 AT/LG SE1/3H 20086 MOD EM ACC LED/T5 LGFM SE 1/3H 20107 WIDE ACC DIFFUSER 120017220 INV LED SLGS SICURO 24V15019 INPUT DOUBLE COUPLING M2015018 KIT ATEX ACCIAIO ECO
Accessories to be ordered separatelyOrder Code Description
- Cable gland M20
Accessories installed on the fixtureOrder Code Description
SMARTDRIVER
SMARTREVOLUTION
GGYMIP66
UV-OIL 960C
IK09230V50Hz
SLGS
1x362x361x582x58
** 1x36** 2x36** 1x58** 2x58
A136ESD ACCIAIO E LED 1X36 SD 4000K 17 4000 K >80 22 48 3150 2500 A++ 110A236ESD ACCIAIO E LED 2X36 SD 4000K 35 4000 K >80 40 96 5570 4400 A++ 110A158ESD ACCIAIO E LED 1X58 SD 4000K 26 4000 K >80 32 72 4400 3500 A++ 110A258ESD ACCIAIO E LED 2X58 SD 4000K 52 4000 K >80 58 144 8350 6500 A++ 110
A136E ACCIAIO E LED 1X36 D 4000K 17 4000 K >80 22 48 3150 2500 A++ 110A236E ACCIAIO E LED 2X36 D 4000K 35 4000 K >80 40 96 5570 4400 A++ 110A158E ACCIAIO E LED 1X58 D 4000K 26 4000 K >80 32 72 4400 3500 A++ 110A258E ACCIAIO E LED 2X58 D 4000K 52 4000 K >80 58 144 8350 6500 A++ 110
SD BUILDING AUTOMATION MODULES INDIVIDUALLY CONNECTED TO THE BEGHELLI SMARTDRIVER
BuildingAutomationmodule
Grande ESCO Italiamodule Vision module
DALI/0-10Vmodule
11
Acciaio Eco LED SmartDriver electronic reactor Power LED Colour CRI Absorption Flux of LEDs Flux of * Energy Luminous
Order Code Description W temperature K Max W NLEDs lm (Tj=25C) Fixture lm Class efficiency lm/WPower* W
* Indicative power for comparison with fluorescent tube fixtures - ** version with electronic Reactor with traditional technology
MOUNTING ON ELECTRIFIED RAIL SUSPENDED MOUNTING
20082 MOD EM ACC LED/T5 TR SE1NRM to be ordered separately
20085 MOD EM ACC LED/T5 AT/LG SE1/3H to be ordered separately
20086 MOD EM ACC LED/T5 LGFM SE 1/3H to be ordered separately
EXTERNAL LED MODULE FOR EMERGENCY LIGHTING
20107 WIDE DIFFUSER ACCIAIO 1200 to be ordered separately
MOUNTING FOR EMITTING WIDE LIGHT
FIX
TU
RE
S
* WHEN THE LUMEN DONT COUNT
The light fixtures in the Stella Polare LED line are equipped withparticularly performing diffusers and optics. In a comparison withstandard fixtures on the market, with a greater luminous flux (lumen),Beghelli Luce Utile fixtures ensure up to 20% more illumination on thework surface (lux). This greater efficiency is expressed in an equivalentenergy saving.
Standard optic Wide optic
Polar DiagramPolar Diagram
Autodimmersensor
12
Acciao LED on an electrified rail is a typicalinstallation in industrial environments,workshop and high-risk areas. The fixture isalso available in the Atex version forparticularly heavy-duty situation and, thanksto the steel housing and technopolymerheads, it possesses very high resistance(IP66-IK09).
13
FIX
TU
RE
S
14
15
FIX
TU
RE
S
The maximum performance forLED lighting in the tertiary sector.The structural simplicity of M600I418 LED is conceived for use inoffices or modern and essential
workplaces.This combination of simplicity andsolidity reveals its elegance in the
most performing diffuser in itscategory, designed with direct andindirect emission to obtain a soft
light effect, appreciably increasingcomfort in the environment.
M600 I418 LEDrecessed and ceiling
* WHEN THE LUMEN DONT COUNT
The light fixtures in the Stella Polare LED line are equipped with particularlyperforming diffusers and optics. In a comparison with standard fixtures on
the market, with a greater luminous flux (lumen), Beghelli Luce Utile fixturesensure up to 20% more illumination on the work surface (lux). This greaterefficiency is expressed in an equivalent energy saving.
1616
Recessed fixture for mounting in an exposed structure, slats andplasterboard. Also for CEILING mounting with an adaptor. Characterized byexcellent Dark Light anti-glare control, its use is particularly indicated in allworkplaces with video terminals where employees are exposed to artificial lightfor long periods.The exact emission of light on the work surface gives precision to thebeam of light, the indirect emission that is reflected on the sidereflectors considerably increases comfort thanks to an overall result ofsoft light.Additional accessories are also available for integrating emergencylighting: the LED Inverter for lighting up part of the fixture in the eventof a black-out, or the LED Module for inserting in the seat provided.
M600 i418 leDCeiling, recessed M600, slats
General characteristics
Equivalent power* 4x18 W
Power supply 230Vac 10% 50/60Hz176-276 Vdc (only SD versions)
Standard EN 60598-1, EN 60598-2-2,EN 60598-2-22 (fundamental requirements), EN 62471 (Photobiological hazard)
Protection grade IP20, IP54
Mountings recessed M600, slats, plasterboard,ceiling
Electronic gear SELV electronic SD (cos j 0.96)Electronic with intelligent dimming
Housing Polyester powder coated sheet steel RAL 9003
Louvre sheet metal Dark light typeUGR
SD BUILDING AUTOMATION MODULES INDIVIDUALLY CONNECTED TO THE BEGHELLI SMARTDRIVER
BuildingAutomationmodule
Grande ESCO Italiamodule Vision module
DALI/0-10Vmodule
Autodimmersensor
17
FIX
TU
RE
S
Polar Diagram
RECESSED MOUNTING ON MODULE 600
10404 Bracket for plasterboard/slats to be ordered separately
RECESSED MOUNTING ON PLASTERBOARD/SLATS
Recess hole dimensions: 580x580 mm
1232 Ceiling adapter
CEILING MOUNTING
I418SDPC with polycarbonate diffuser
I418SDVT with glass diffuser
VERSION IP54
19350 INVERTER ECOLED SE 1N RM to be ordered separately
19341 MODULE EM LED AT SE 1N to be ordered separately
19342 MODULE EM LED LG SE/SA 1/3H to be ordered separately
19343 MODULE EM LED LGFM SE/SA 1/3H to be ordered separately
17467 MODULE EM LED SLG to be ordered separately
EMERGENCY WITH INVERTER ECOLED/LED MODULE
IP40
17
M600 I418 LED SmartDriver electronic reactor
I418SD INC M600 4X18 LED SD 4000K 32 4000 >80 36 90 4400 4000 110 A++ 1I418SDPC INC M600 4X18 LED SD P IP54 4000K 32 4000 >80 36 90 4400 4000 110 A++ 1I418SDVT INC M600 4X18 LED SD V IP54 4000K 32 4000 >80 36 90 4400 4000 110 A++ 1
I418LED INC M600 4X18 LED B 4000K 32 4000 >80 36 90 4400 4000 110 A++ 1I418TRLED INC M600 4X18 LED TR SD 4000K 32 4000 >80 36 90 4400 4000 110 A++ 1
Power Colour CRI Absorption Flux of LEDs Flux of * Luminous EnergyOrder Code Descrizione LED temperature K Max W NLED lm (Tj=25C) Fixture lm efficiency lm/W class PackagingPower* W
4x184x184x18
** 4x18** 4x18
* Indicative power for comparison with fluorescent tube fixtures - ** version with electronic Reactor with traditional technology
17220 INV LED SLGS SICURO 24V to be ordered separately
19355 INV LED AT/LG 6W 55V 123H to be ordered separately
19356 INV LED LGFM 6W 55V 123H to be ordered separately
RA02 AUTORIPARA INVERTER BATTERY 7.2V 1.7Ah to be ordered separately
EMERGENCY WITH INVERTER LED /AUTORIPARA
AUTORIPARA SYSTEM:
When the Autoripara battery is inserted, theLED Inverter doubles the power or theautonomy, as well as intervening in the eventof a malfunction of the main battery
1818
M600 I418 LED on Module 600 is thesystem most used in offices and in publicadministration. This fixture, with itsparticularly limited thickness, can be easilymounted on the ceiling with the appropriateadapter.
19
FIX
TU
RE
S
19
20
21
FIX
TU
RE
S
In P236 and P258 LED fixtures,particular care was devoted to thestudy of the louvre: with the aid of
optical design software of the latestgeneration, the particular features ofLED lighting have been optimised,
achieving a minimal geometric shapethat nevertheless allows total control
of light reflections.The maximum performance in terms
of intensity and uniformity ofillumination to ensure maximum visualcomfort and a very high light output.
P236 / P258 LEDceiling and suspension
P236/P258 leDCeiling, suspension
Ceiling or suspension fixture for installations in the tertiary sector.Characterized by excellent Dark Light anti-glare control, its use isparticularly indicated in all workplaces with video terminals whereemployees are exposed to artificial light for long periods.The exact emission of light on the work surface gives highcharacteristics of comfort and precision of the beam of light. A rangeof accessories is available for heavy wiring and for mechanical fixingin a continuous row to obtain a civil system of the latest generation.Additional accessories are also available for integrating emergencylighting: the LED Inverter for lighting up part of the fixture in the eventof a black-out, or the LED Module for inserting in the seat provided.
22
960CDARKLIGHT
230V50Hz
B
HL
Power Dimensions (mm) WeightW L B H kg
2x36 1327 206 70 4.6
2x58 1327 206 70 4.6
19355 INV LED AT/LG 6W 55V 123H 19356 INV LED LGFM 6W 55V 123H 17220 INV LED SLGS SICURO 24V20080 P236/58 LED SINGLE SUSPENSION 20081 P236/58 LED SUSPENSION+SINGLE MAINS CABLE19350 INVERTER EcoLED SE 1N20087 COUPLING+ CONT ROW SUSP CABLE20088 THREE-PHASE THROUGH WIRING
Accessories to be ordered separatelyOrder Code Description
General characteristics
Equivalent power* 2x36, 2x58 W
Power supply 230Vac 10% 50/60Hz176-276 Vdc
Standard EN 60598-1, EN 60598-2-2,EN 60598-2-22 (fundamental requirements), EN 62471 (Photobiological hazard)
Protection grade IP20
Mountings ceiling, suspension
Electronic gear SELV electronic SD (cos j 0.96)Electronic with intelligent dimming
Housing polyester powder coated sheet steelRAL 9003
Louvre sheet metal Dark light typeUGR
SD BUILDING AUTOMATION MODULES INDIVIDUALLY CONNECTED TO THE BEGHELLI SMARTDRIVER
BuildingAutomationmodule
Grande ESCO Italiamodule Vision module
DALI/0-10Vmodule
Autodimmersensor
23
FIX
TU
RE
S
CEILING MOUNTING DARK LIGHT WIDE OPTIC
20088 THREE-PHASE THROUGH WIRING CEILING to be ordered separately
20087 COUPLING + THREE-PHASE THROUGH WIRING SUSPENSIONto be ordered separately
CONTINUOUS ROW MOUNTING
P236 / P258 LED SmartDriver electronic reactor
P236SD CEILING LED 2x36 SD 4000K 31 4000 >80 36 140 4800 4000 111 A++ 1P258SD CEILING LED 2x58 SD 4000K 42 4000 >80 47 140 6160 5100 109 A++ 1
Power Colour CRI Absorption Flux of LEDs Flux of * Luminous EnergyOrder Code Descrizione LED temperature K Max W NLED lm (Tj=25C) Fixture lm efficiency lm/W class PackagingPower* W
2x362x58
* Indicative power for comparison with fluorescent tube fixtures
19350 INVERTER ECOLED SE 1N RM to be ordered separately
19341 MODULE EM LED AT SE 1N to be ordered separately
19342 MODULE EM LED LG SE/SA 1/3H to be ordered separately
19343 MODULE EM LED LGFM SE/SA 1/3H to be ordered separately
17467 MODULE EM LED SLG to be ordered separately
EMERGENCY WITH INVERTER ECOLED
IP40
20080 P236/58 LED SINGLE SUSP to be ordered separately
20081P236/58 LED SUSP+SINGLE CABLE to be ordered separately
SUSPENSION MOUNTING
Polar Diagram
17220 INV LED SLGS SICURO 24V to be ordered separately
19355 INV LED AT/LG 6W 55V 123H to be ordered separately
19356 INV LED LGFM 6W 55V 123H to be ordered separately
RA02 AUTORIPARA INVERTER BATTERY 7.2V 1.7Ah to be ordered separately
EMERGENCY WITH INVERTER LED /AUTORIPARA
AUTORIPARA SYSTEM:
When the Autoripara battery is inserted, theLED Inverter doubles the power or theautonomy, as well as intervening in the eventof a malfunction of the main battery
24
P236/P258 LED suspension expresseselegance and simplicity at the same time.With the appropriate accessories, acontinuous row system of great aestheticeffect can be obtained. However, the ceilingversion maintains an excellent design andgreat speed of installation.
25
FIX
TU
RE
S
26
Zoom LED Beghelli is a fixture thatoverturns the already known schemes of
accent lighting. Thanks to a patentedmicrocontrol of the light beam, quite unlikeother products on the market until now,
this fixture has an unprecedentedversatility of use and an efficiency of the
light beam that upset the traditionalconcept of the accent spotlight.The light beam control system is
structured with a technology similar to thatof the most innovative variable focus
camera lenses: a micromovement groupthat, easily and without tools, is able to varythe focal length and therefore the width of
the cone of light.The end result is a unique product that
produces a beam of light with acontinuously variable angle of emission
from 10 to 40.
ZOOM LED Polyvalent is not enough
27
FIX
TU
RE
S
Zoom leD Three-phase electrified track
General characteristics
Equivalent power* 35, 70, 150 W
Power supply 230VAC 50HZ
Standard EN 60598-1,EN 60598-2-1, EN 60598-2-22 (fundamental requirements), EN62471 (photobiological hazard), EN 60570(electrified track)
Protection grade IP40
Mountings Three-phase electrified track
Electronic gear SELV electronic SD (cos j 0.95)Electronic with intelligent dimming
Housing Die-cast aluminium, white RAL 9010
Lenses transparent PMMA
Louvre Zoom LED System
MTBF Control gear** 65.000 h
Luminous flux >60.000 (L80B20)maintenance**
Colour tolerance 3 SDCM
* Equivalent power for comparison with metal halide fixtures** At a reference working temperature of 25C
Adjustable focus projector made of die-cast aluminium whichintegrates the power of 9 high-efficiency LEDs. Patented optics,consisting of a system of variable focus PMMA lenses to adjust thebeam of light with an angle between 10 and 40. Adjustment iscontinuous and is obtained by a regulator on the rear. The fixture canbe oriented on both the horizontal and the vertical axis. The Zoom Ledsystem envisages the used of a vast range of accessories for thecreation of a three-phase electrified track; The adaptor supplied allowsthe spotlight to be used on most of the three-phase electrified tracksavailable on the market. The Zoom Led range has been designedspecifically for accent lighting, where it is essential to enhance theitems on display. Due to this particular feature it does not offerdimming with an AutoDimmer Sensor.The fixture is also available on request in a single-phase version.
B
H
L
28
SINGLE-PHASE VERSION
THREE-PHASE VERSION
L
B
H
SINGLE-PHASE VERSION
Three-phase 330 170 53 1.4Single-phase 239 194 61 1.4
Version Dimensions (mm) WeightL B H max kg
650C
230V50HzIP40 IK05
20102 BUILDING AUTOMATION CONTROL UNIT20104 BUILDING AUTOMATION RADIO TRANSMITTER INTERFACE15022 BUILDING AUTOMATION RADIO MODULE15025 GRANDE ESCO ITALIA RADIO MODULE20111 VISION RADIO MODULE 3MT20112 VISION RADIO MODULE 6MT
Building automation to be ordered separately Order Code Description
SMARTDRIVER
SMARTREVOLUTION
SD BUILDING AUTOMATION MODULES INDIVIDUALLY CONNECTED TO THE BEGHELLI SMARTDRIVER
BuildingAutomationmodule
Grande ESCO Italiamodule
Beam width 10DiameterDistance Luminosity
0,11 m 119379 lx0,5 m
0,22 m 29845 lx1,0 m
0,33 m 13264 lx1,5 m
0,44 m 7461 lx2,0 m
0,66 m 3316 lx3,0 m
0,55 m 4775 lx2,5 m
I max 35w*= 28.800 Cd / I max 70w*= 47.400 Cd
Beam width 20DiameterDistance Luminosity
0,18 m 49269 lx0,5 m
0,36 m 12317 lx1,0 m
0,53 m 5474 lx1,5 m
0,71 m 3079 lx2,0 m
1,07 m 1369 lx3,0 m
0,89 m 1971 lx2,5 m
I max 35w*= 11.900 / I max 70w*= 19.550 Cd
Beam width 30DiameterDistance Luminosity
0,29 m 24656 lx0,5 m
0,58 m 6164 lx1,0 m
0,87 m 2740 lx1,5 m
1,15 m 1541 lx2,0 m
1,73 m 685 lx3,0 m
1,44 m 986 lx2,5 m
I max 35w*= 5.950 Cd / I max 70w*= 9.800 Cd
Beam width 40DiameterDistance Luminosity
0,39 m 16512 lx0,5 m
0,78 m 4128 lx1,0 m
1,16 m 1835 lx1,5 m
1,55 m 1032 lx2,0 m
2,33 m 459 lx3,0 m
1,94 m 660 lx2,5 m
I max 35w*= 4.000 Cd / I max 70w*= 6.550 Cd
29
FIX
TU
RE
S
* Indicative power for comparison with metal halide fixtures
MINIMUM RANGE OF THE FOCAL LENGTH FOR 10 CONE OF LIGHTMAXIMUM RANGE OF THE FOCAL LENGTH FOR 40 CONE OF LIGHT
SPECIAL VARIATIONS: COLOUR RENDERING 90, COLOUR TEMPERATURE ON REQUEST, SINGLE-PHASE TERMINAL, COLOUR BLACK RAL 9005, COLOUR GREY RAL 7036Contact the Beghelli sales network
Zoom LED SmartDriver electronic reactor
Z135SD ZOOM LED BTRF 1X35W SD 3K 13 3000 80 17 9 1750 1400 84 A++ 1Z170SD ZOOM LED BTRF 1X70W SD 3K 29 3000 80 33 9 3200 2500 76 A++ 1Z1150SD ZOOM LED BTRF 1X150W SD 3K 47 3000 80 52 9 5000 4000 77 A++ 1
Power Colour CRI Absorption Flux of LEDs Flux of * Luminous EnergyOrder Code Descrizione LED temperature K Max W NLED lm (Tj=25C) Fixture lm efficiency lm/W class PackagingPower* W
1x351x701x150
Vision radioModule
30
Zoom leD Mounting on ceiling, wall
General characteristics
Equivalent power* 35, 70, 150 W
Power supply 230Vac 10% 50/60Hz176-276 Vdc
Standard EN 60598-1, EN 60598-2-1, EN 60598-2-22 (fundamentalrequirements), EN 62471 (photobiological hazard)
Protection grade IP40
Mountings wall, ceiling
Electronic gear SELV electronic SD (cos j 0.95)Electronic with intelligent dimming
Housing Die-cast aluminium, white RAL 9010
Lenses transparent PMMA
Louvre Zoom LED System
MTBF Control gear** 65.000 h
Luminous flux >60.000 (L80B20)maintenance**
Colour tolerance 3 SDCM
* Equivalent power for comparison with metal halide fixtures** At a reference working temperature of 25C
Adjustable focus projector made of die-cast aluminium whichintegrates the power of 9 high-efficiency LEDs. Patented optics,consisting of a system of variable focus PMMA lenses to adjust thebeam of light with an angle between 10 and 40. Adjustment iscontinuous and is obtained by a regulator on the rear. The fixture canbe oriented on both the horizontal and the vertical axis. With thebracket supplied it can be mounted on the wall or on the ceiling. TheZoom Led range has been designed specifically for accent lighting,where it is essential to enhance the items on display. Due to thisparticular feature it does not offer dimming with anAutoDimmer Sensor.
340
+180
35, 70, 150 W 240 195 53 1.4
Version Dimensions (mm) WeightL B H max kg
SPECIAL VARIATIONS: COLOUR RENDERING 90 - COLOUR TEMPERATURE ON REQUEST Contact the Beghelli sales network
650C
230V50HzIP40 IK05
20102 BUILDING AUTOMATION CONTROL UNIT20104 BUILDING AUTOMATION RADIO TRANSMITTER INTERFACE15022 BUILDING AUTOMATION RADIO MODULE15024 DALI MODULE / 0-10V15025 GRANDE ESCO ITALIA RADIO MODULE20111 VISION RADIO MODULE 3MT20112 VISION RADIO MODULE 6MT
Building automation to be ordered separately Order Code Description
SMARTDRIVER
SMARTREVOLUTION
SD BUILDING AUTOMATION MODULES INDIVIDUALLY CONNECTED TO THE BEGHELLI SMARTDRIVER
BuildingAutomationmodule
Grande ESCO Italiamodule
DALI/0-10Vmodule
31
FIX
TU
RE
S
Beam width 10DiameterDistance Luminosity
0,11 m 119379 lx0,5 m
0,22 m 29845 lx1,0 m
0,33 m 13264 lx1,5 m
0,44 m 7461 lx2,0 m
0,66 m 3316 lx3,0 m
0,55 m 4775 lx2,5 m
I max 35w*= 28.800 Cd / I max 70w*= 47.400 Cd
Beam width 20DiameterDistance Luminosity
0,18 m 49269 lx0,5 m
0,36 m 12317 lx1,0 m
0,53 m 5474 lx1,5 m
0,71 m 3079 lx2,0 m
1,07 m 1369 lx3,0 m
0,89 m 1971 lx2,5 m
I max 35w*= 11.900 / I max 70w*= 19.550 Cd
Beam width 30DiameterDistance Luminosity
0,29 m 24656 lx0,5 m
0,58 m 6164 lx1,0 m
0,87 m 2740 lx1,5 m
1,15 m 1541 lx2,0 m
1,73 m 685 lx3,0 m
1,44 m 986 lx2,5 m
I max 35w*= 5.950 Cd / I max 70w*= 9.800 Cd
Beam width 40DiameterDistance Luminosity
0,39 m 16512 lx0,5 m
0,78 m 4128 lx1,0 m
1,16 m 1835 lx1,5 m
1,55 m 1032 lx2,0 m
2,33 m 459 lx3,0 m
1,94 m 660 lx2,5 m
I max 35w*= 4.000 Cd / I max 70w*= 6.550 Cd
MINIMUM RANGE OF THE FOCAL LENGTH FOR 10 CONE OF LIGHTMAXIMUM RANGE OF THE FOCAL LENGTH FOR 40 CONE OF LIGHT
* Indicative power for comparison with metal halide fixtures
Zoom LED SmartDriver electronic reactor
Z135ASD ZOOM LED AP 1X35W SD 3K 13 3000 80 17 9 1750 1400 84 A++ 1 Z170ASD ZOOM LED AP 1X70W SD 3K 29 3000 80 33 9 3200 2500 76 A++ 1Z1150ASD ZOOM LED AP 1X150W SD 3K 47 3000 80 52 9 5000 4000 77 A++ 1
Power Colour CRI Absorption Flux of LEDs Flux of * Luminous EnergyOrder Code Descrizione LED temperature K Max W NLED lm (Tj=25C) Fixture lm efficiency lm/W class PackagingPower* W
1x351x701x150
Visionleradio modue
3232
33
FIX
TU
RE
S
33
Zoom LED on a three-phase electrified rail isthe typical installation for illuminating displayareas that vary periodically, such as shops,showrooms and exhibitions in general. Thetrack system allows rapid movement of thespotlight which, in turn, has variable focuswith a beam angle from 10 to 40.
D170/1150 - D226 LEDrecessed and ceiling
34
A revolutionary fixture that allowsgreat power of the light beamthanks to optics with controlled
refraction. An innovative Downlight also in itsmultifunctional aspect, to satisfy all
mounting necessities.Various accessories are available
for both recessed and ceilingmounting, with adapters that allowit to be integrated in existing holes
of various sizes.Not least is the heat dissipation
aspect, achieved with analuminium cooling system to allowperfect performance even in cases
of reduced recess space.
D170/1150 - D226 LEDrecessed and ceiling
35
FIX
TU
RE
S
36
D170/1150 leD Downlight
General characteristics
Equivalent power* 1x70, 1x150 W
Power supply 230Vac 10% 50/60Hz176-276 Vdc
Standard EN 60598-1, EN 60598-2-2, EN 60598-2-22 (fundamentalrequirements), EN 62471
Protection grade IP20
Mountings recessed, ceiling
Electronic gear SELV electronic SD (cos j 0.96)Electronic with intelligent dimming
Housing Die-cast aluminium RAL 9003 metal
Louvre sheet metal Dark light type UGR50.000/60.000 (L80B20)maintenance**
Colour tolerance 3 SDCM
* Equivalent power for comparison with metal halide fixtures** At a reference working temperature of 25C
This revolutionary Downlight range sprang from the need to optimizelighting on the ground while reducing glare as much possible. Thepatented optical system consists of a primary louvre with very highreflectance and a secondary louvre for controlling glare, so it is alsosuitable in the presence of video terminals. The control gear isindependent of the fixture and is supplied already wired to the opticalcompartment, complete with cable ties.The particular diffusion of the heat of products with LED sourcesconsiderably reduces the overheating of the illuminated surfaces,thus ensuring greater environmental comfort and less impact on theilluminated objects. Together with the substantial absence of UVradiation, these features make the product particularly suitable forexhibition areas.An additional accessory is available for lighting the LED source of thedevice in the event of a black-out.
960CDARKLIGHT
230V50Hz
46
33
313
270
168
110
11
Electronic control gear
235
168
110
10
272
146
recessed version for holesfrom 170 to 200 mm
recessed version with adapter ring forholes from 200 to 240 mm
ceiling version
20090 ADAPTER RING 240 DWL LED20091 CEILING ACCESSORY DWL LED19364 INV LED IP65 AT/LG 123H 19365 INV LED IP65 LGFM 123H17210 INV LED IP65 SLGS SICURO 24V20098 WIDE DIFFUSER DWL/RL08 LED
Accessories to be ordered separatelyOrder Code Description
Power* W Mounting Lamp Weight kg
150/70 recessed leD 1.9
150/70 ceiling leD 3.2
150/70 recessed with ring leD 2.2
IK05IP20 SLGS
20102 BUILDING AUTOMATION CONTROL UNIT20104 BUILDING AUTOMATION RADIO TRANSMITTER INTERFACE15029 AUTODIMMER BOX SENSOR15022 BUILDING AUTOMATION RADIO MODULE15024 DALI MODULE / 0-10V15025 GRANDE ESCO ITALIA RADIO MODULE20111 VISION RADIO MODULE 3MT20112 VISION RADIO MODULE 6MT
Building automation to be ordered separately Order Code Description
SMARTDRIVER
SMARTREVOLUTION
17210 INV LED IP65 SLGS SICURO 24V to be ordered separately
19364 INV LED IP65 AT/LG 123H to be ordered separately
19365 INV LED IP65 LGFM 123H to be ordered separately
RA02 AUTORIPARA INVERTER BATTERY 7.2V 1.7Ah to be ordered separately
EMERGENCY WITH INVERTER LED IP65/AUTORIPARA
D1150 LED SmartDriver electronic reactor
D1150SD DWL SPOT LED 1x150W INC SD 3K 47 3000 >80 52 24 6700 5500 106 A++ 1
LED Colour Colour Absorption N Flux of LEDs Flux of Luminous Energy Order Code Description Power K temperature rendering Max W LEDs lm (Tj=85C) Fixture lm efficiency lm/W class PackagingPower* W
150
37
FIX
TU
RE
S
RECESSED MOUNTING
20090 ADAPTER RING 240 DWL RL08 to be ordered separately
MOUNTING WITH ADAPTER RING
20091 CEILING ADAPTER FOR DWL RL08 to be ordered separately
CEILING MOUNTING
20098 to be ordered separately
WIDE DIFFUSER
Recess hole dimensions: 200240 mmRecess hole dimensions: 170200 mm
C0-C180 C90-C270
105
90
75
60
45
30
15 0 15
cd/klm
400
600
800
1200
Polar Diagram
SPECIAL VARIATIONS: COLOUR RENDERING 90COLOUR TEMPERATURE ON REQUESTContact the Beghelli sales network
* Indicative power for comparison with metal halide fixtures
IP65
D170 LED SmartDriver electronic reactor
D170SD DWL SPOT LED 1x70W INC SD 3K 38 3000 >80 43 48 4000 3300 77 A++ 1
LED Colour Colour Absorption N Flux of LEDs Flux of Luminous Energy Order Code Description Power K temperature rendering Max W LEDs lm (Tj=85C) Fixture lm efficiency lm/W class PackagingPower* W
70
* WHEN THE LUMEN DONT COUNT
The light fixtures in the Stella Polare LED line are equipped withparticularly performing diffusers and optics. In a comparison withstandard fixtures on the market, with a greater luminous flux (lumen),Beghelli Luce Utile fixtures ensure up to 20% more illumination on thework surface (lux). This greater efficiency is expressed in an equivalentenergy saving.
SD BUILDING AUTOMATION MODULES INDIVIDUALLY CONNECTED TO THE BEGHELLI SMARTDRIVER
BuildingAutomationmodule
Grande ESCO Italiamodule
DALI/0-10Vmodule
AutodimmerSensor
Vision radiomodule
AUTORIPARA SYSTEM:
When the Autoripara battery is inserted, theLED Inverter doubles the power or theautonomy, as well as intervening in the eventof a malfunction of the main battery
270
168
110
11
272
146
recessed version for holes from170 to 200 mm
recessed version with adapter ring forholes from 200 to 240 mm
235
168
110
10
38
D226 leD Downlight
General characteristics
Equivalent power* 2x26 W
Power supply 230Vac 10% 50/60Hz176-276 Vdc
Standard EN 60598-1, EN 60598-2-2, EN 60598-2-22 (fundamentalrequirements), EN 62471
Protection grade IP20
Mountings recessed, ceiling
Electronic gear SELV electronic SD (cos j 0.96) Electronic with intelligent dimming
Housing Die-cast aluminium
Louvre sheet metal parabolic
MTBF Control gear** 65.000 h
Luminous flux >60.000 (L80B20)maintenance**
Colour tolerance 3 SDCM
* Equivalent power for comparison with fluorescent tube fixtures** At a reference working temperature of 25C
Downlight with very high light output The optical system allowsmaximized illumination with excellent anti-glare features, so it is alsosuitable in the presence of video terminals. The control gear isindependent of the fixture and is supplied already wired to the opticalcompartment, complete with cable ties.The particular diffusion of the heat of products with LED sourcesconsiderably reduces the overheating of the illuminated surfaces,thus ensuring greater environmental comfort and less impact on theilluminated objects. Together with the substantial absence of UVradiation, these features make the product particularly suitable forexhibition areas.An additional accessory is available for lighting the source and theLEDs of the device in the event of a black-out.
960C
230V50Hz
ceiling version
46
33
313
Electronic control gear
20090 ADAPTER RING 240 DWL LED20091 CEILING ACCESSORY DWL LED19364 INV LED IP65 AT/LG 123H 19365 INV LED IP65 LGFM 123H 17210 INV LED IP65 SLGS SICURO 24V20098 WIDE DIFFUSER DWL/RL08 LED
Accessories to be ordered separatelyOrder Code Description
Power* W Mounting Lamp Weight kg
2x26 recessed leD 1.9
2x26 ceiling leD 3.2
2x26 recessed with ring leD 2.2
IP20 SLGS
20102 BUILDING AUTOMATION CONTROL UNIT20104 BUILDING AUTOMATION RADIO TRANSMITTER INTERFACE15029 AUTODIMMER BOX SENSOR15022 BUILDING AUTOMATION RADIO MODULE15024 DALI MODULE / 0-10V15025 GRANDE ESCO ITALIA RADIO MODULE20111 VISION RADIO MODULE 3MT20112 VISION RADIO MODULE 6MT
Building automation modules to be ordered separately Order Code Description
SMARTDRIVER
SMARTREVOLUTION
SD BUILDING AUTOMATION MODULES INDIVIDUALLY CONNECTED TO THE BEGHELLI SMARTDRIVER
BuildingAutomationmodule
Grande ESCO Italiamodule
DALI/0-10Vmodule
Autodimmersensor
39
FIX
TU
RE
S
20090 Adapter ring 240 DWL RL08 LED to be ordered separately
RECESSED MOUNTING WITH ADAPTER RING
20091 Ceiling accessory DWL LED to be ordered separately
CEILING MOUNTING
C0-C180 C90-C270
105
90
75
60
45
3015 0 15
cd/klm
300
200
500
Polar Diagram
SPECIAL VARIATIONS: COLOUR RENDERING 90 - COLOUR TEMPERATURE ON REQUESTContact the Beghelli sales network
* Indicative power for comparison with fluorescent tube fixtures
D226 LED SmartDriver electronic reactor
D226SD DWL SPOT LED 2x26W INC SD 4K 16 4000 >80 20 40 2040 1700 85 A++ 1
LED Colour Colour Absorption N Flux of LEDs Flux of Luminous Energy Order Code Description Power K temperature rendering Max W LEDs lm (Tj=85C) Fixture lm efficiency lm/W class PackagingPower* W
2x26
RECESSED MOUNTING
20099 WIDE DIFFUSER DWL/RL08 LED
WIDE DIFFUSER
Recess hole dimensions: 170200 mm
* WHEN THE LUMEN DONT COUNT
The light fixtures in the Stella Polare LED line are equipped withparticularly performing diffusers and optics. In a comparison withstandard fixtures on the market, with a greater luminous flux (lumen),Beghelli Luce Utile fixtures ensure up to 20% more illumination on thework surface (lux). This greater efficiency is expressed in an equivalentenergy saving.
Vision radiomodule
17210 INV LED IP65 SLGS SICURO 24V to be ordered separately
19364 INV LED IP65 AT/LG 123H to be ordered separately
19365 INV LED IP65 LGFM 123H to be ordered separately
RA02 AUTORIPARA INVERTER BATTERY 7.2V 1.7Ah to be ordered separately
EMERGENCY WITH INVERTER LED IP65/AUTORIPARA
IP65
AUTORIPARA SYSTEM:
When the Autoripara battery is inserted, theLED Inverter doubles the power or theautonomy, as well as intervening in the eventof a malfunction of the main battery
40
41
FIX
TU
RE
S
The recessed D170/1150 - D226 LED has areally minimal technological impact. The wideillumination area makes it suitable even forlarge spaces; with the appropriate adaptermodules it can be installed in existing holesfrom 170 to 240mm. In offices with thepresence of PC operators, it offers excellentanti-glare features (Darklight).
42
A fixture that springs from the needto highlight vertical surfaces
in interiors.Used in art exhibitions to cast an
accent light on the works on show,but also in retail outlets for directlylighting the goods or creating a
luminous backstage for displayed products.
A microprismatic anti-glare diffuserand above all a shape of the beamof light conceived to illuminate thewalls with maximum uniformity,thanks also to the tilting of the
diffuser which directs the light onlywhere it is needed.
43
FIX
TU
RE
S
WW135/170 LEDGreat uniformity of lighting
WW135/170 leDDownlight - wall washer
General characteristics
Equivalent power* 1x35, 1x70 W
Power supply 230Vac 10% 50/60Hz176-276 Vdc
Standard EN 60598-1, EN 60598-2-2,EN 60598-2-22 (fundamentalrequirements), EN 62471
Protection grade IP42
Working temperature -20C +40C
Mountings recessed in false ceilings
Electronic gear SELV electronic SD (cos j 0.96) Electronic with intelligent dimming
Housing Polyester powder coated die-castaluminium RAL 9003
Diffuser Toughened glass 3 mm thick
MTBF Control gear** 65.000 h
Luminous flux 50.000h (L80B20)maintenance**
Colour tolerance 3 SDCM
* Equivalent power for comparison with metal halide fixtures** At a reference working temperature of 25C
Downlight for vertical surfaces. The optics allow maximized wallillumination while maintaining excellent anti-glare characteristicsthanks to the microprismatic diffuser. The louvre can be oriented onan axis. The control gear is independent of the fixture and issupplied already wired to the optical compartment, complete withcable ties.The particular diffusion of the heat of products with LED sourcesconsiderably reduces the overheating of the illuminated surfaces,thus ensuring greater environmental comfort and less impact on theilluminated objects. Together with the substantial absence of UVradiation, these features make the product particularly suitable forexhibition areas, both in retail outlets and in museums. Due to thisparticular feature it does not offer dimming with anAutoDimmer Sensor.An additional accessory is available for lighting the LED source of thedevice in the event of a black-out.
L
B
H
60
0
30
60
125
230
L
B
H
60
0
30
60
125
230
1x35 250 160 114 39 1.61x70 250 160 114 39 1.6
Power Dimensions (mm) Width WeightL B H beam max kg
44
960C
230V50HzIP20
SPECIAL VARIATIONS: COLOUR RENDERING 90 - COLOUR TEMPERATURE ON REQUESTContact the Beghelli sales network
20102 BUILDING AUTOMATION CONTROL UNIT20104 BUILDING AUTOMATION RADIO TRANSMITTER INTERFACE15022 BUILDING AUTOMATION RADIO MODULE15024 DALI MODULE / 0-10V15025 GRANDE ESCO ITALIA RADIO MODULE20111 VISION RADIO MODULE 3MT20112 VISION RADIO MODULE 6MT
Building automation to be ordered separately Order Code Description
19364 INV LED IP65 AT/LG 123H 19365 INV LED IP65 LGFM 123H 17210 INV LED IP65 SLGS SICURO 24V
Accessories to be ordered separatelyOrder Code Description
SMARTDRIVER
SMARTREVOLUTION
46
33
313
Electronic control gear
SD BUILDING AUTOMATION MODULES INDIVIDUALLY CONNECTED TO THE BEGHELLI SMARTDRIVER
BuildingAutomationmodule
Grande ESCO Italiamodule
DALI/0-10Vmodule
RECESSED MOUNTING
* Indicative power for comparison with metal halide fixtures
WW135/170 LED SmartDriver electronic reactor
WW135SD WW LED 1x35W OR INC SD 3K 18 3000 >80 23 72 2700 2250 100 A++ 1WW170SD WW LED 1x70W OR INC SD 3K 40 3000 >80 45 72 4900 4000 90 A++ 1
LED Colour Colour Absorption N Flux of LEDs Flux of Luminous Energy Order Code Description Power K temperature rendering Max W LEDs lm (Tj=85C) Fixture lm efficiency lm/W class PackagingPower* W
1x351x70
Prismatic diffuser glass with high transmittance allowing thereduction of glare while keeping the lighting efficiency unchanged.
45
FIX
TU
RE
S
Diagramma polare
Vision radiomodule
17210 INV LED IP65 SLGS SICURO 24V to be ordered separately
19364 INV LED IP65 AT/LG 123H to be ordered separately
19365 INV LED IP65 LGFM 123H to be ordered separately
RA02 AUTORIPARA INVERTER BATTERY 7.2V 1.7Ah to be ordered separately
EMERGENCY WITH INVERTER LED IP65/AUTORIPARA
IP65
AUTORIPARA SYSTEM:
When the Autoripara battery is inserted, theLED Inverter doubles the power or theautonomy, as well as intervening in the eventof a malfunction of the main battery
4646
WW135/170 LED for interiors ischaracterized by asymmetrical lighting for abetter distribution of light intensity on the wallthat is to be highlighted. The tilting systemallows lighting to be accentuated and to bedirected towards the floor.
47
FIX
TU
RE
S
47
D170/1150 LEDadjustable
tilting as much as 60
48
The best solution for accent lightingwithout three-phase tracks, withthe possibility of connecting the
Inverter LED to integrateemergency lighting. The fixture canbe fitted with a nocturnal LED lampwith lenticular optic, to be insertedin a special compartment in the
housing. Flexibility of use is anotherfocus of the project: the sameproduct has various optional
louvres to obtain different angles ofthe beam of light, varying from 16to 70. The whole combined with a
system that allows rotation in alldirections, with an ample angle oftilting the lighting compartment.
D170/1150 LEDadjustable
tilting as much as 60
49
FIX
TU
RE
S
50
D170/1150 leD adjustableDownlight
General characteristics
Equivalent power* 1x70, 1x150 W
Standard EN 60598-1, EN 60598-2-2,EN 60598-2-22 (fundamentalrequirements), EN 62471
Power supply 230Vac 10% 50/60Hz176-276 Vdc
Protection grade IP44 optic compartment, IP20 housing
Working temperature -20C +40C
Mountings recessed in false ceilings
Housing Polyester powder coated die-castaluminium RAL 9003
Louvre white PC with high reflectance (70supplied, 16, 24 and 40 mirrorfinished aluminium to be orderedseparately)
Diffuser Toughened glass 3 mm thick
Electronic gear SELV electronic SD (Cos 0.97)Electronic with intelligent dimming
MTBF Control gear** 65.000h
Luminous flux 50.000h (1x150W) (L80B20)maintenance** 60.000h (1x70W) (L80B20)
Colour tolerance 3 SDCM
* Equivalent power for comparison with metal halide fixtures** At a reference working temperature of 25C
Die-cast aluminium spotlight with high-efficiency LED source, whitepowder coated. Power supply box separate from the fixture forgreater mounting flexibility and better heat dissipation. Quick couplingconnection terminal board. White louvre with very high reflectanceand complex geometry for a high light output (>97%), with highlytransparent toughened glass. Optics adjustable through 345 andtilting with maximum inclination 60.An additional accessory is available for lighting the LED source of thedevice in the event of a black-out and an optional nocturnal lamp withlenticular optic for maximizing lighting on the ground. The adjustableDWL LED has been designed specifically for retail lighting, where it isessential to enhance the items on display. Due to this particularfeature it does not offer dimming with an AutoDimmerSensor.
* Indicative power for comparison with metal halide fixtures
1233 LOUVRE 16 DWL OR1234 LOUVRE 24 DWL OR1235 LOUVRE 40 DWL OR19364 INV LED IP65 AT/LG 123H 19365 INV LED IP65 LGFM 123H 17210 INV LED IP65 SLGS SICURO 24V14120 CONTROL GEAR 5 LED14121 1 LED NOCTURNAL MODULE
Accessories to be ordered separatelyOrder Code Description
IP44IP20650C
L
170
H
max
15
mm B
A
C
50 mm(150W)
210 mm (opzionale)
170 mm (standard)
50 mm
Power * Dimensions (mm) a Lamp WeightW L A B C H max max kg
1x70 233 45 302 30 150 60 leD cOB 2.3
1x150 233 45 302 30 150 60 leD cOB 2.3
RX08 LED adjustable SmartDriver electronic reactor
D170LORSD DWL LED 1x70W OR INC SD 3K 29 3000 >80 34 1 (COB) 4000 3400 100 A++ 1D1150LORSD DWL LED 1x150W OR INC SD 3K 50 3000 >80 55 1 (COB) 6500 5500 100 A++ 1
LED Colour Colour Absorption N Flux of LEDs Flux of Luminous Energy Order Code Description Power K temperature rendering Max W LEDs lm (Tj=85C) Fixture lm efficiency lm/W class PackagingPower* W
1x701x150
170 200
SLGS
SMARTDRIVER
SMARTREVOLUTION
Building automation to be ordered separately Order Code Description
20102 BUILDING AUTOMATION CONTROL UNIT20104 BUILDING AUTOMATION RADIO TRANSMITTER INTERFACE15022 BUILDING AUTOMATION RADIO MODULE15024 DALI MODULE / 0-10V15025 GRANDE ESCO ITALIA RADIO MODULE20111 VISION RADIO MODULE 3MT20112 VISION RADIO MODULE 6MT1237 SENSORE AUTODIMMER OR
46
33
313
Electronic control gear
SD BUILDING AUTOMATION MODULES INDIVIDUALLY CONNECTED TO THE BEGHELLI SMARTDRIVER
BuildingAutomationmodule
Grande ESCO Italia module
DALI/0-10Vmodule
Autodimmersensor
Vision radiomodule
51
FIX
TU
RE
S
1233 Louvre 16 DWL OR to be ordered separately
1234 Louvre 24 DWL OR to be ordered separately
1235 Louvre 40 DWL OR to be ordered separately
LOUVRE 16, 24, 40
OPTICS ADJUSTABLE THROUGH 345 AND TILTING WITH MAXIMUM INCLINATION 60.
SPECIAL VARIATIONS: COLOUR RENDERING 90 - COLOUR TEMPERATURE ON REQUESTContact the Beghelli sales network
Beam width 16DiameterDistance Luminosity
I max 70w*= 10.100 Cd / I max 150w*= 18.700 Cd
0,16 m 40338 lx0,5 m
0,32 m 10084 lx1,0 m
0,49 m 4482 lx1,5 m
0,65m 2521 lx2,0 m
0,81 m 1614 lx2,5 m
0,97 m 1120 lx3,0 m
Beam width 24DiameterDistance Luminosity
I max 70w*= 10.100 Cd / I max 150w*= 18.700 Cd
0,20 m 40846 lx0,5 m
0,40 m 10212 lx1,0 m
0,59 m 4538 lx1,5 m
0,79m 2553 lx2,0 m
0,99 m 1634 lx2,5 m
1,19 m 1135 lx3,0 m
Beam width 40DiameterDistance Luminosity
I max 70w*= 4.950 Cd / I max150w*= 9.150 Cd
0,34 m 19774 lx0,5 m
0,68 m 4944 lx1,0 m
1,02 m 2197 lx1,5 m
1,35 m 1236 lx2,0 m
1,70 m 791 lx2,5 m
2,04 m 549 lx3,0 m
Beam width 70DiameterDistance Luminosity
I max 70w*= 2.200 Cd / I max 150w*= 4.100 Cd
0,65 m 8826 lx0,5 m
1,30 m 2207 lx1,0 m
1,95 m 981 lx1,5 m
2,60 m 552 lx2,0 m
3,25 m 353 lx2,5 m
3,90 m 245 lx3,0 m
OPTICS SUPPLIED
14121 1 LED NOCTURNAL MODULE to be ordered separately
14120 5 LED CONTROL GEAR to be ordered separately
MOUNTING WITH NOCTURNAL/EMERGENCY LAMP
17210 INV LED IP65 SLGS SICURO 24V to be ordered separately
19364 INV LED IP65 AT/LG 123H to be ordered separately
19365 INV LED IP65 LGFM 123H to be ordered separately
RA02 AUTORIPARA INVERTER BATTERY 7.2V 1.7Ah to be ordered separately
EMERGENCY WITH INVERTER LED IP65/AUTORIPARA
IP65
AUTORIPARA SYSTEM:
When the Autoripara battery is inserted, theLED Inverter doubles the power or theautonomy, as well as intervening in the eventof a malfunction of the main battery
52
The adjustable D170/1150 LED replacesnon adjustable traditional spotlights withholes from 170 to 200mm.
53
FIX
TU
RE
S
The fixture offers the dual possibility ofaccent and environmental lightingdepending on the extractable positioningand on the type of louvre installed, whichvaries the opening of the beam from 16to 70.
54
A louvre that combines versatility,sturdiness and superlativetechnical lighting features,
conceived for large structures withelevated installation heights.
The triple possibility of light diffusionmakes this a complete product inan industrial setting, solving themost varied lighting problemsthanks to optics of the latest
generation that focus on efficiencyand glare control.
The small dimensions of thehousing allow the easy passage ofoverhead cranes or other internalmoving stuctures: there are no
mounting limits.
H250/400 LEDMinimum bulk ceiling suspension
55
FIX
TU
RE
S
56
h250/400 leD Louvre
General characteristics
Equivalent power* 250, 400 W
Standard EN 60598-1, EN 60598-2-1,EN 60598-2-22 (fundamentalrequirements), EN 62471(Photobiological hazard), EN61493
Power supply 230Vac 10% 50 Hz176-276 Vdc
Protection grade IP66
Working temperature -20C +40C
Mountings ceiling, suspension, electrified rail
Housing Die-cast aluminium RAL 7040
Louvre Sheet metal with parabolic developmentin anti-iridescent, mirror finished,anodised aluminium, Wide,Concentrating, Ellipsoid
Diffuser Prismatic toughened glass 4mm
Electronic gear SELV electronic SD (Cos 0.97)Electronic with intelligent dimming
MTBF Control gear** 100.000h
Luminous flux 50.000h (1x400W) (L80B20)maintenance** 60.000h (1x250W) (L80B20
Colour tolerance 3 SDCM
* Equivalent power for comparison with metal halide fixtures** At a reference working temperature of 25C*** Per Versioni dimmerabili alimentate a corrente continua
rivolgersi alla rete vendita Beghelli
The H250/400 LED is a fixture of the latest generation able tocombine the advantages of the LED light source with state-of-the-artoptic systems, as regards both performance and flexibility ofapplication. The LED sources used, with very high efficiency, produceunprecedented lighting on the ground and allow mounting at heightsof more than 12 metres. The diffuser has an ample and uniform areaof emission, allowing very low luminosity and therefore reduced glarewith high visual comfort. The excellent mechanical characteristics(IP66-IK09) allow installation even in heavy-duty industrialenvironments. The fixture is available with three different optic modes:concentrating, wide and elliptical beam.Unlike traditional industrial louvre fixtures, the H250/400 LED ischaracterized by very compact dimensions, especially the height,which make it the ideal solution for sheds where there are overheadcranes or other moving structures. The fixture is designed to resistmagnetic disturbances typical of industrial environments (EN 61000-6-2). In the versions with dimming, to ensure maximum energysaving, self-adapting technology is used on the sensor integrated inthe fixture, to automatically adjust the emission of light according tothe reading of the natural light present on the work surface.A LED INVERTER is also available which transforms the fixture into anemergency fixture with SA function, to light a section of the LEDsource in the event of a black-out.The versions with intelligent dimming are enabled in the GrandeESCo Italia project
- Anti-vandal screws- Cable gland M20 with ventilation valve
Accessories suppliedOrder Code Description
19364 INV FULL LED IP65 LG 123H 19365 INV FULL LED IP65 LGFM 123H17210 INV LED IP65 SLGS SICURO 24V12658 PROTECTIVE GRID12659 ELECTRIFIED RAIL FIXING BRACKET12664 CEILING FIXING BRACKET12663 LOUVRE SUSPENSION CABLE
Accessories to be ordered separatelyOrder Code Description
L
B
H
250 425 413 121 leD 1 7.7
400 425 413 121 leD 1 7.7
Power * Dimensions (mm) Lamp Packaging WeightW L B H max kg
20102 BUILDING AUTOMATION CONTROL UNIT20104 BUILDING AUTOMATION RADIO TRANSMITTER INTERFACE
Building automation to be ordered separately Order Code Description
SPECIAL VARIATIONS: COLOUR TEMPERATURE ON REQUEST Contact the Beghelli sales network
IK09 960CGGYM UV-OILIP66 SLGS
57
FIX
TU
RE
S
* Indicative power for comparison with metal halide fixtures
SUSPENDED MOUNTING
12664 Ceiling fixing bracket to be ordered separately
CEILING MOUNTING
12659 Electrified rail fixing bracket to be ordered separately
ON ELECTRIFIED RAIL
Elliptical opticWide optic Concentrating optic
H250/400 LED Electronic reactor
H250LED RIF LED 250W DIFF 4000K WIDE 116 4000 >80 127 256 17300 15000 118 A++ 1H400LED RIF LED 400W DIFF 4000K WIDE 214 4000 >80 230 512 30000 26000 113 A++ 1H250CLED RIF LED 250W CONC 4000K CONCENTRATING 116 4000 >80 127 256 17300 15000 118 A++ 1H400CLED RIF LED 400W CONC 4000K CONCENTRATING 214 4000 >80 230 512 30000 26000 113 A++ 1H250ELED RIF LED 250W ELLIT 4000K ELLIPTICAL 116 4000 >80 127 256 17300 15000 118 A++ 1H400ELED RIF LED 400W ELLIT 4000K ELLIPTICAL 214 4000 >80 230 512 30000 26000 113 A++ 1HD250LED RIF LED DIM 250W DIFF 4000K WIDE 116 4000 >80 127 256 17300 15000 118 A++ 1HD400LED RIF LED DIM 400W DIFF 4000K WIDE 214 4000 >80 230 512 30000 26000 113 A++ 1HD250CLED RIF LED DIM 250W CONC 4000K CONCENTRATING 116 4000 >80 127 256 17300 15000 118 A++ 1HD400CLED RIF LED DIM 400W CONC 4000K CONCENTRATING 214 4000 >80 230 512 30000 26000 113 A++ 1HD250ELED RIF LED DIM 250W ELLIT 4000K ELLIPTICAL 116 4000 >80 127 256 17300 15000 118 A++ 1HD400ELED RIF LED DIM 400W ELLIT 4000K ELLIPTICAL 214 4000 >80 230 512 30000 26000 113 A++ 1HDV250LED RIF LED DIM V 250W DIFF 4000K WIDE 116 4000 >80 127 256 17300 15000 118 A++ 1HDV400LED RIF LED DIM V 400W DIFF 4000K WIDE 214 4000 >80 230 512 30000 26000 113 A++ 1HDV250CLED RIF LED DIM 250W CONC 4000K CONCENTRATING 116 4000 >80 127 256 17300 15000 118 A++ 1HDV400CLED RIF LED DIM 400W CONC 4000K CONCENTRATING 214 4000 >80 230 512 30000 26000 113 A++ 1HDV250ELED RIF LED DIM 250W ELLIT 4000K ELLIPTICAL 116 4000 >80 127 256 17300 15000 118 A++ 1HDV400ELED RIF LED DIM 400W ELLIT 4000K ELLIPTICAL 214 4000 >80 230 512 30000 26000 113 A++ 1
LED Colour CRI Absorption N Flux of LEDs Flux of Luminous EnergyOrder Code Description Optics Power temperature K Max W LEDs lm (Tj=25C) Fixture lm efficiency lm/W class PackagingPower* W
250400250400250400250400250400250400250400250400250400
H250 Vision HDV250LED/CLED/ELED
H400 Vision HDV400LED/CLED/ELED
VERSION WITH VISION MODULE
17210 INV LED IP65 SLGS SICURO 24V to be ordered separately
19364 INV LED IP65 AT/LG 123H to be ordered separately
19365 INV LED IP65 LGFM 123H to be ordered separately
RA02 AUTORIPARA INVERTER BATTERY 7.2V 1.7Ah to be ordered separately
EMERGENCY WITH INVERTER LED IP65/AUTORIPARA
IP65
AUTORIPARA SYSTEM:
When the Autoripara battery is inserted, theLED Inverter doubles the power or theautonomy, as well as intervening in the eventof a malfunction of the main battery
58
H 250/400 LED on an electrified rail is a typicalinstallation in industrial environments, workshopand high-risk areas. Its particular distinctivefeatures are the reduced thickness, to replace thetraditional Bells, and high lighting on the groundwhich makes the concentrating versionparticularly suitable for installation a great heights.
59
FIX
TU
RE
S
60
A projector that combines design,sturdiness and superlativetechnical lighting features,
conceived for illuminating largeoutdoor areas. The dual possibility
of light diffusion offers totalcoverage in outdoor lighting,
solving the most complex lightingproblems thanks to optics of thelatest generation that focus onefficiency and glare control.The small dimensions of the
housing contrast with the depth ofthe beam of light which has no
limits of use.
F250/400 LEDWall or ground outdoors
61
FIX
TU
RE
S
62
F250/400 leD Louvres
General characteristics
Equivalent power* 250, 400 W
Standard EN 60598-1, EN 60598-2-1,EN 60598-2-22 (fundamentalrequirements), EN 62471(Photobiological hazard), EN61493
Power supply 230Vac 10% 50 Hz176-276 Vdc
Protection grade IP66
Working temperature -20C +40C
Mountings on the ground, wall, spotlight towers
Housing Die-cast aluminium RAL 7040
Louvre Sheet metal with parabolic developmentin anti-iridescent, mirror finished,anodised aluminium. SymmetricalAsymmetrical
Diffuser Prismatic toughened glass 4mm
Electronic gear SELV electronic SD (Cos 0.97)Electronic with intelligent dimming
MTBF Control gear** 100.000h
Luminous flux 50.000h (1x150W)maintenance** 60.000h (1x700W) (L80B20)
Colour tolerance 3 SDCM
* Equivalent power for comparison with metal halide fixtures** At a reference working temperature of 25C*** Per Versioni dimmerabili alimentate a corrente continua
rivolgersi alla rete vendita Beghelli
The F250/F400 LED is a fixture of the latest generation able tocombine the advantages of the LED light source with state-of-the-artoptic systems, as regards both performance and flexibility ofapplication. The LED sources used, with very high efficiency, produceunprecedented lighting that allows the illumination of building faadesor hardstands, even at considerable distance. The diffuser has anample and uniform area of emission, allowing very low luminosity andtherefore reduced glare with high visual comfort. The excellentmechanical characteristics (IP66-IK09) allow installation in outdoorsettings even in extreme conditions, while the possibility of versionswith a symmetrical or asymmetrical beam makes the fixtureparticularly versatile.The square cut design of the F250/F400 LED allows movementsthrough 360, on the axis of rotation of the goniometric bracket, thusenabling great flexibility of movement and mounting.In the versions with intelligent dimming, to ensure maximum energysaving, self-adapting technology is used on the sensor integrated inthe fixture, to automatically adjust the emission of light according tothe reading of the natural light present on the work surface.A LED INVERTER is also available which transforms the fixture into anemergency fixture with SA function, to light a section of the LEDsource in the event of a black-out.The versions with intelligent dimming are enabled in the GrandeESCo Italia project
- Anti-vandal screws- Goniometric bracket- Cable gland M20 with ventilation valve
Accessories suppliedOrder Code Description
19364 INV FULL LED IP65 LG 123H 19365 INV FULL LED IP65 LGFM 123H17210 INV LED IP65 SLGS SICURO 24V12660 ADAPT L POST HEAD12661 POST HEAD 2x 60-7612662 POST HEAD 4x 60-7612658 PROTECTIVE GRID
Accessories to be ordered separatelyOrder Code Description
L
B
H
250 438 434 121 leD 1 8.8
400 438 434 121 leD 1 8.8
Power * Dimensions (mm) Lamp Packaging WeightW L B H max kg
20102 BUILDING AUTOMATION CONTROL UNIT20104 BUILDING AUTOMATION RADIO TRANSMITTER INTERFACE
Building automation to be ordered separately Order Code Description
SPECIAL VARIATIONS: COLOUR TEMPERATURE ON REQUEST Contact the Beghelli sales network
IK09 960CGGYM UV-OILIP66 SLGS
63
FIX
TU
RE
S
WALL MOUNTINGGROUND MOUNTING
12658 Protective grid
PROTECTIVE GRID
-
PROTECTIVE GRID
12661 POST HEAD 2x 60-76 to be ordered separately
12662 POST HEAD 4x 60-76 to be ordered separately
POST MOUNTING
* Indicative power for comparison with metal halide fixtures
F250/400 LED Electronic / dimmable electonic reactor
F250SLED PRO LED 250W SM 4000K SYMMETRICAL 116 4000 >80 127 256 17300 15000 118 A++ 1F400SLED PRO LED 400W SM 4000K SYMMETRICAL 214 4000 >80 230 512 30000 26000 113 A++ 1F250ALED PRO LED 250W AS 4000K ASYMMETRICAL 116 4000 >80 127 256 17300 15000 118 A++ 1F400ALED PRO LED 400W AS 4000K ASYMMETRICAL 214 4000 >80 230 512 30000 26000 113 A++ 1FD250SLED PRO LED DIM 250W SM 4000K SYMMETRICAL 116 4000 >80 127 256 17300 15000 118 A++ 1FD400SLED PRO LED DIM 400W SM 4000K SYMMETRICAL 214 4000 >80 230 512 30000 26000 113 A++ 1FD250ALED PRO LED DIM 250W AS 4000K ASYMMETRICAL 116 4000 >80 127 256 17300 15000 118 A++ 1FD400ALED PRO LED DIM 400W AS 4000K ASYMMETRICAL 214 4000 >80 230 512 30000 26000 113 A++ 1FDV250SLED PRO LED DIM VIS 250W SM 4000K SYMMETRICAL 116 4000 >80 127 256 17300 15000 118 A++ 1FDV400SLED PRO LED DIM VIS 400W SM 4000K SYMMETRICAL 214 4000 >80 230 512 30000 26000 113 A++ 1FDV250ALED PRO LED DIM VIS 250W AS 4000K ASYMMETRICAL 116 4000 >80 127 256 17300 15000 118 A++ 1FDV400ALED PRO LED DIM VIS 400W AS 4000K ASYMMETRICAL 214 4000 >80 230 512 30000 26000 113 A++ 1
LED Colour CRI Absorption N Flux of LEDs Flux of Luminous EnergyOrder Code Description Optics Power temperature K Max W LEDs lm (Tj=25C) Fixture lm efficiency lm/W class PackagingPower* W
250400250400250400250400250400250400
Symmetrical optic Asymmetrical optic
17210 INV LED IP65 SLGS SICURO 24V to be ordered separately
19364 INV LED IP65 AT/LG 123H to be ordered separately
19365 INV LED IP65 LGFM 123H to be ordered separately
RA02 AUTORIPARA INVERTER BATTERY 7.2V 1.7Ah to be ordered separately
EMERGENCY WITH INVERTER LED IP65/AUTORIPARA
IP65
AUTORIPARA SYSTEM:
When the Autoripara battery is inserted, theLED Inverter doubles the power or theautonomy, as well as intervening in the eventof a malfunction of the main battery
F250 Vision FDV250SLED, FDV250ALED
F400 Vision FDV400SLED, FDV400ALED
VERSION WITH VISION MODULE
64
65
FIX
TU
RE
S
F250/400 LED Floodlight has a practicaladjustable bracket that allows mountingon the wall or on the ground. Thepossibility of an asymmetrical optic, withvery high illumination, makes it particularlysuitable for the illumination of largeindustrial faades.
66
A single polyvalent fixture for useeither as a projector or a louvre,
combining design, sturdiness andsuperlative technical lighting
features. The dual possibility ofsymmetrical and asymmetrical lightdiffusion is embodied in the sameproduct and is achieved thanks toa louvre with divisible modules. A
single fixture to achieve totalcoverage in outdoor lighting,
solving the most varied technicallighting problems thanks to an
innovative optical project based onefficiency and glare control.The small dimensions of the
housing contrast with the depth ofthe beam of light which has no
limits of use.
FH 70/150 LEDWall or ground outdoors
67
FIX
TU
RE
S
68
Fh 70/150 leD Projectors / Louvres
General characteristics
Equivalent power* 70, 150 W
Standard EN 60598-1, EN 60598-2-1,EN 60598-2-22 (fundamentalrequirements), EN 62471(Photobiological hazard), EN61493
Power supply 230Vac 10% 50 Hz176-276 Vdc
Protection grade IP66, IK09
Working temperature -20C +40C
Mountings on the ground, wall, spotlight towers,suspension
Housing Polyester powder coated die-castaluminium RAL 7040
Louvre Sheet metal with parabolic developmentin anti-iridescent, mirror finished,anodised aluminium. SymmetricalAsymmetrical
Diffuser Prismatic toughened glass 4mm
Electronic gear SELV electronic SD (Cos 0.97) with intelligent dimming
MTBF Control gear** 65.000h
Luminous flux 60.000h (L80B20)maintenance**
Colour tolerance 3 SDCM
* Equivalent power for comparison with metal halide fixtures** At a reference working temperature of 25C
The FH 70/150 LED is a fixture of the latest generation able tocombine the advantages of the LED light source with state-of-the-artoptic systems, as regards both performance and flexibility ofapplication. The LED sources used, with very high efficiency, produceunprecedented lighting that allows the illumination of building faadesor hardstands, even at considerable distance. The diffuser has anample and uniform area of emission, allowing very low luminosity andtherefore reduced glare with high visual comfort. The excellentmechanical characteristics (IP66-IK09) allow installation in outdoorsettings even in extreme conditions, while the possibility of versionswith a symmetrical or asymmetrical beam makes the fixtureparticularly versatile.The square cut design of the FH 70/150 LED allows movementsthrough 360, on the axis of rotation of the goniometric bracket, thusenabling great flexibility of movement and mounting.Thanks to the Autodimmer Sensor accessory, the fixture works withintelligent dimming. To ensure maximum energy saving, self-adaptingtechnology is used on the sensor integrated in the fixture, toautomatically adjust the emission of light according to the reading ofthe natural light present on the work surface.A LED INVERTER is also available which transforms the fixture into anemergency fixture with SA function, to light a section of the LEDsource in the event of a black-out.Louvre with a controlled beam to opt