surplus center catalog 2012

Catalog 285 2012 Edition SURPLUS CENTER1015 West ”O“ StreetLincoln, NE 68528

SOURCE CODE

SU

RPLU

S C

EN

TER

CA

TALO

G 285 2012 E

DIT

ION

SURPLUSCENTER®

Catalog 285 - 2012 Edition

Order Onlineor

by Phone!

www.surpluscenter.comor

1-800-488-3407Toll Free FAX 877-474-5198

2.5 HP PowerProGas Engine

ITEM 28-1623$135.99

• Brand new PowerPro. Engine featuresoverhead valves, cast iron sleeve liners,mechanical governor, replaceable valveguides and automatic decompression foreasier starting and exceptional operation.Oil alert system. Emissions compliant in allstates except CA.SPECIFICATIONS • Shaft ⅝˝ diam. x 27/16˝• 2.5 HP w/keyway• 3600 RPM • 4 bolt 35/8˝ B.C. auxiliary• Displ. 5.92 cu. in. mount on PTO side• Bore/stroke 2.05˝ x 1.77˝ • Size 9˝ x 10½˝ x 13½˝• Fuel tank capacity 1½ qt. • Shpg. 25 lbs.

Ammo BoxesITEM 1-3324

ITEM 1-2261

• U.S. military surplus ammo boxes. Steelcon struc tion with removable rubber gas-keted lid.

ITEM 1-2261 $18.95• 40mm. Size 19˝ x 6⅛˝ x 11˝. Shpg. 17 lbs.

ITEM 1-3324 $19.95• 120mm. Size 12¾˝ x 6¼˝ x 31⅞˝. Shpg.22 lbs.

3½˝ x 1¼˝RubberWheelITEM 1-3734$2.99• New, JARVIS wheel. Black neoprene rub-ber tread permanently compressed be-tween two bright nickel plated steel discsthat are welded together.SPECIFICATIONS • Bore thru-length 1⅝˝• Size 3½˝ dia. x 1¼˝ w. • Bearing ball• Load capacity 200 lbs. • Hub centered• Bore ⅜˝ diam. • Shpg. 1½ lbs.

AmmoBoxes

• U.S. military surplus 0.50 caliber ammoboxes. Steel con struc tion with end-hingeand gasket on lid.

ITEM 1-1099 $8.95• Size 11¾˝ x 7¼˝ x 6⅛˝. Shpg. 6 lbs.

ITEM 1-1121 $6.95• 7.62 mm. Size 11˝ x 4˝ x 7˝. Shpg. 5 lbs.

4.5 Gallon Fuel Tanks

• New, steel generator universal fuel tank.Ideal for generator replacement, buildingequipment and other applications. Fea-tures include heavy duty steel constructionwith durable finish, plated twist-on ventedcap and rubber mounts on all four corners.Threaded female port on bottom for usewith fuel valve having M10x1.25 threads.Use fuel shut-off (ITEM 28-1783-V below)or Briggs & Stratton #189133GS.SPECIFICATIONS• Capacity 4.5 gallons • Port size M10x1.25• Mount bolt pattern • Filler port 2˝20⅜˝ x 13⅞˝ • Size 21⅜˝ x 14⅞˝ x 6˝• Mount hole size 5/16˝ • Shpg. 12 lbs.

ITEM 28-1783-B $18.99• Finish color black.

ITEM 28-1783-R $18.99• Finish color red.

ITEM 28-1783-V $3.99• Shut-off valve for the two fuel tanks above.

6˝ x 36¾˝ x 2½˝Hydraulic Cylinder

ITEM 9-8025 $599.99• New, EAGLE HYDRAULICS ModelHBU6036-2500-HC hydraulic double act-ing cylinder.SPECIFICATIONS• Double acting • Retracted lgth. 48˝• Bore x Stroke 6˝ x 36˝ • Crosstube ends• Pressure 2500 PSI max. rod 4˝ w., base 6¾˝ w.• Rod dia. 2½˝ • Pin holes 1½˝• Ports ¾˝ NPT • Shpg. 240 lbs.

Truck freight only.

6 HP Briggs & StrattonIntek

Engine

ITEM 28-1784$219.99

• New, BRIGGS & STRATTON Intek over-head valve horizontal shaft gas engine. Dura-bore cast iron cylinder sleeve. Featuresmanual choke and throttle, fuel shutoff valve.SPECIFICATIONS• Model 12T412-0113-F8 • Shaft horizontal• Engine family 7BSXS.2051HD • Shaft ¾˝ dia. x 25/16˝• Power 6 HP w/keyway• Torque 9 ft-lbs. • Mount 3⅛˝ x 6⅜˝• Bore/Stroke 2.688˝/2.20˝ • Accessory mnt. 3⅝˝ B.C.• Disp. 205 cc. • Fuel tank 1 gal.• Speed 3600 RPM • Size 16½˝ x 12¼˝ x 16¼˝• Start recoil • Shpg. 42 lbs.

120 VAC Red LEDTraffic LightITEM 11-3310$11.95• Removed from service. ECOLUX red 8˝ di-ameter traffic signal light. Multiple red LEDassembly provides high intensity light, longlife, and low power requirements. Black plas-tic housing with red lens and rubber gasket.SPECIFICATIONS • 7¾˝ diameter red lens• 120 VAC • Overall size• 4-6 Watts 8⅜˝ dia. x 3½˝ deep• 60 Hertz • Shpg. 3 lbs.

12 VDC Hyd. DoubleSelectorValve

ITEM 9-7852 $159.99• New, 12 volt DC solenoid operated dou-ble selector valve. Allows one directionalvalve to operate two independent cylin-ders. Energizing coil shifts from cylinder 1to cylinder 2. Ideal for adding a “thumb” tobuckets on loaders.SPECIFICATIONS• Flow rate 13.2 GPM • Connector Hirschmann• Pressure 2500 PSI max. • Ports six SAE 8• Coil voltage 12 VDC • Size 7¼˝ x 2⅝˝ x 2½˝• Current 3 amps • Shpg. 8 lbs.

PRSRT STDUS POSTAGE

PAIDBEAVER DAM, WI

PERMIT #577

UtilityCabinet

ITEM 1-2461$79.95

• New. Six drawer utility cabinet. Ideal forunder-counter cabinet for workshops, re-tail stores, home use, and other storageapplications. Solid oak drawer fronts andsides with dado construction. Upper 2drawers are open frame originally de -signed for cash drawers. Bottom 4 draw-ers have inside dimensions of 19½˝ x 21¾˝x 5˝. Individual color coded keyed locks onbottom 4 drawers. Clear protective finishon front, painted sides and top. Outside di-mensions: 23˝ x 25¼˝ x 41˝. Shpg. 250 lbs.

Truck freight only.

19.5 cu. in.Hydraulic

Motor

ITEM 9-9133 $499.95• New WHITE Model GMV320 660-N401hydraulic gerotor motor. Cast iron housing.160mm pilot diameter.SPECIFICATIONS• Disp. 19.5 cu. in. / rev. • Rotation reversible• Motor Type Gerotor • Mount 4 bolt on 7⅞˝ B.C.• PSI 3000 cont., 3500 int. • Shaft 50mm diam. x 3¼˝• Torque: with 14mm key9315 in-lbs. cont. • Ports 1˝ B.S.P.P.10867 in-lbs. int. • Case drain 1/4˝ B.S.P.P.• RPM 473 cont., 556 int. • Size 10⅛˝ x 7˝ x 7˝• GPM 40 cont., 47 int. • Shpg. 76 lbs.

16 RPM, 2 HP Gearmotor

ITEM 5-1775 $899.99• New Reliance Electric Duty Mastermotor with Dodge Quantis right anglehelical bevel gear reducer. Motor has182TC frame and rated for variable fre-quency inverter or sine wave duty.Mounts from 4 hole pattern on bottomand back face of gearbox. ReducerModel BB1083CN180 TC rated for up to6.8 HP input and 26553 in lbs. output.SPECIFICATIONS• Speed 16 RPM • Rotation reversible• Voltage 230/460 AC • Duty continuous• Three phase • Enclosure TEFC• Amperage 7.6/3.8 • Mount 6.57˝ x 8.76˝• Power 2 HP • Shaft 2⅜˝ dia. x 5˝• Torque 7815 in-lbs. • Size 37˝ x 10˝ x 13½˝• Gear ratio 108.52:1 • Shpg. 500 lbs.

Truck freight only.

65 RPM, 1.5 HP Gearmotor

ITEM 5-1774 $799.99• New Reliance Electric Duty Mastermotor with Dodge Quantis right anglehelical bevel gear reducer. Motor has182TC frame and rated for variable fre-quency inverter or sine wave duty.Mounts from 4 hole pattern on bottomand back face of gearbox. ReducerModel BB483 CN1 80 TC rated for up to 4HP input and 3983 in lbs. output.SPECIFICATIONS• Speed 65 RPM • Rotation reversible• Voltage 230/460 AC • Duty continuous• Three phase • Enclosure TEFC• Amperage 7.6/3.8 • Mount 4.72˝ x 5.12˝• Power 1.5 HP • Shaft 1⅝˝ dia. x 3˝• Torque 1485 in - lbs. • Size 29˝ x 13˝ 9˝• Gear ratio 28.55:1 • Shpg. 215 lbs.

Truck freight only.

3˝ x 13⁄16˝ SwivelPlate CasterWith Brake

ITEM 1-3765$1.99• New, JARVIS swivel plate caster withwheel brake. Hard rubber wheel withplated steel caster yoke.SPECIFICATIONS • Mounting height 3½˝• Wheel size 3˝ dia. x 13/16˝ • Mount 4 bolt 1˝ x 2⅛˝ ctrs.• Load capacity 100 lbs. • Bolt holes ¼˝ diam.• Top plate 2⅝˝ x 1¾˝ • Shpg. 1 lb.

2.5 cu. in. WhiteHydraulic

Motor

ITEM 9-8287 $79.99• New, WHITE DRIVE PRODUCTS WR Se-ries Model 255040F3DD22AAAA hydraulicmotor. The WR Series motor incorporates thelatest advances for smooth performance, ef-ficiency and durability. Features include anoptimized Roller Stator with seven precisionrollers, three-zone spool valve, integral checkvalves, high pressure shaft seal and a provi-sion for a case drain to reduce pressure oninternal seals to improve product life. Inter-changeable with the following motor lines:Dynamic BMPH, Danfoss DH, Char-LynnH/S, Parker/Ross MG/TB.SPECIFICATIONS • GPM 12 cont., 16 int.• Disp. 2.5 cu. in. / rev. • Rotation reversible• Motor Type Roller Stator • Mount 4 bolt 3.25˝ B.C.• PSI 2250 cont., 3000 int. • Shaft 1˝ dia. x 1¾˝ keyed• Torque • Ports SAE 10823 in-lbs. cont. • Case drain SAE 41088 in-lbs. int. • Size 5⅝˝ x 4˝ x 4˝

• RPM 1116 cont., 1515 int. • Shpg. 17 lbs.

12 Volt DCMuffinFan

ITEM 16-1445$4.99• New, SANYO DENKI Model 109R 1212 -H1071 muffin fan. Brushless motor. 3rdwire for tachometer output. Plastic frameand blades.SPECIFICATIONS • Speed 2600 RPM• Flow 102 CFM max. • Mount 4 hole 4⅛˝ ctrs.• Static press. 0.26 in. H2O • Blade dia. 4⅜˝• Voltage 12 DC • Number of blades 7• Amperage 0.52 Amps • Size 4¾˝ x 4¾˝ x 1¼˝• Power 6.25 Watts • Shpg. 1 lb.

1980 CFM,12 VDCFan

ITEM 16-1442 $109.95• New, DCM Mfg Model TA14R2010 axialfan. Configured to pull air. Blades can beremoved and reversed for pusher opera-tion. Motor sealed against dust and water.Curved plastic blades and housing. Sock-ets for optional right angle mountingbrackets (not included).SPECIFICATIONS• Flow 1980 CFM max • Mounting pattern 1:• Voltage 12 DC 4 holes 7.5˝ x 13˝• Amperage 18.7 Amps max • Mounting pattern 2:• Static press. 1.2˝ H20 max 12 holes 14.66 B.C.• Mnt. 4 holes on 13¼˝ B.C. • Size 15.04˝ dia. x 3.32˝• Blade dia. 14˝ • Shpg. 8 lbs.

ZTR Left/Right TransaxleAssembly

ITEM 13-1489$599.99• New, HYDRO-GEAR ZT-2200 EZTSeries Models ZC-DHBB-4M7C-3FPAand ZC-AHBB-4M7B-2FPA zero-turnstyle hydrostatic transaxles. Includes a leftand right transaxle for building ZTR vehicles orfor use as replacement on equipment. Integrated10cc variable displacement axial pump and a 10cc fixed dis-placement drive motor. Features include a die cast aluminum housing, belt-driveinput pulley with fan, single control lever per unit for forward/reverse and speedcontrol, disengagement lever to allow freewheeling, four bolt hub for direct mounting ofwheel and parking brake.SPECIFICATIONS• Input 3000 RPM max. • Max. weight per axle • Axle lgth. 4⅛˝ housing to face of hub• Overall reduction 19.2:1 18˝ diam. tire 340 lbs. • Output 4 bolt wheel hub on 4˝ B.C.• Output speed 0-150 RPM 20˝ diam. tire 300 lbs. • Mount 6 hole• Engine size 18-22 HP • Max. tire dia. 20˝ • Lubrication 20W-50 oil• Output torque • Input rotation CW • Size 14¾˝ x 14¼˝ x 10¼˝Cont. 115 ft-lbs., Int. 150 ft-lbs. • Input 4½˝ dia. pulley for ½˝ belt • Shpg. 76 lbs.

8000 lb. Worm GearWinch

ITEM 315-B $679.95• Brand new, heavy duty worm-gearwinch. Made to be driven with a vehiclePTO shaft, with an electric motor or a hy-draulic motor. Fully automatic safety brakeand dog clutch for free-spooling. Built witha safety factor of 3:1. Enclosed gears runin oil. Roller bearings.SPECIFICATIONS • 29:1 gear ratio• 8000 lb. rated line pull • Shaft 25 mm diam. x 1¼˝• Drum dimensions • Drum capacity4⅛˝ diameter hub 325’ of ⅜˝ cable10¾˝ diam. flange, 470’ of 5/16˝ cable9⅞˝ between flanges 735’ of ¼˝ cable

• Size 24˝ x 14˝ x 12½˝ • Shpg. 160 lbs.Truck freight only.

High Torque, Low Speed Hydraulic Motors

• New, DYNAMIC JPPS series hy-draulic motors. Rolortorc power ele-ment. High efficiency low, noise, hightorque low speed motors. Combinationof needle and roller bearings on theoutput shaft permit high radial forces.

SPECIFICATIONS• Reversible rotation • Shaft 1˝ diam. x 1⅝˝ w/woodruff key • Cont. pressure 1400 PSI• Max. pressure 2000 PSI • Ports ½˝ NPT

Performance based on 1400 PSI2 Bolt Item 4 Bolt Item Displ. Torque RPM GPM Shpg. Price9-7906-50 9-7907-50 3.04 539 1062 15 14 lbs. $ 99.999-7906-63 9-7907-63 3.89 681 847 15 14 lbs. $ 99.999-7906-100 9-7907-100 6.11 1062 640 18 16 lbs. $104.999-7906-125 9-7907-125 7.7 1354 512 18 16 lbs. $109.999-7906-160 9-7907-160 9.78 1725 400 18 17 lbs. $109.999-7906-200 9-7907-200 12.05 2115 328 18 17 lbs. $114.999-7906-250 9-7907-250 15.12 2655 261 18 18 lbs. $114.999-7906-305 9-7907-305 18.97 3345 210 18 19 lbs. $119.99

800-488-3407 Just Arrived! 179&

Order Online www.surpluscenter.com or by Phone 1-800-488-3407Complete Order Information And Shipping Rates Can Be Found On Pages 146 - 147

Vehicle Color CameraObservation

System

ITEM 11-3316 $262.95• Brand new, color rear observation kit fortrucks, buses, RV’s, construction equip-ment. Improves safety where visibility is re-stricted. Audio function. Wireless handheldremote control. Adjustable bracket andrain/sun shade on camera. 18 LED’saround camera lens to provide night vision.Furnished with 1 camera, inputs for 2 ad-ditional cameras (purchased separately).View from additional cameras can be setfor normal or mirrored image. Multi-lan-guage screen display. Automatic cameraheating below 14°.SPECIFICATIONS • Cable length 65 ft.• Screen 7˝ color LCD • Monitor size 7˝ x 1˝ x 5˝• Operating voltage 12-24 DC • Camera size 3˝ x 2˝ x 1¾˝• Night vision range 5 meters • Control box size• Camera viewing angle 120° 5⅛˝ x 2⅞˝ x 1¼˝• Screen format 16:9/4:3 • Shpg. 7 lbs.

Extra Color Camera ForVehicle ObservationSystemITEM 11-3316-C$110.95• Brand new, extra color camera for ITEM11-3316. Adjustable bracket and rain/sunshade. 18 LED’s around camera lens toprovide night vision. Automatic cameraheating below 14°.SPECIFICATIONS• Operating voltage 12-24 DC • Cable length 65 ft.• Night vision range 5 meters • Size 3˝ x 2˝ x 1¾˝• Camera viewing angle 120° • Shpg. 5 lbs.

12 Volt DCMuffinFanITEM 16-1444$1.99• New, SUNON Model KDE12085PHV3miniature muffin fan. Brushless motor. 3rdwire for tachometer output. Plastic frameand blades.SPECIFICATIONS • Speed 3700 RPM• Flow 10.2 CFM max. • Mount 4 hole 40mm ctrs.• Static press. 0.23 in. H2O • Blade dia. 0.493• Voltage 12 DC • Number of blades 7• Amperage 0.035 Amps • Size 50mm x 50mm x 15mm• Power 0.5 Watts • Shpg. ¼ lb.

120/240 VAC GeneratorPanel

ITEM 11-3306$8.99

• New, generator panel outlet enclosurebox with hinged cover. Electrical compo-nents are mounted in a plastic enclosuredesigned for surface mounting to a panel.Four stud mount for use with 3/16˝ threadcutting speed nuts. One twist-lock and twoduplex receptacle outlets. Two push-but-ton reset circuit breakers. Use for genera-tors, electrical panels, power center for aworkbench, or remove the components toinstall in other applications.SPECIFICATIONS• 240/120 Outlet: NEMA L14-30, 30 amp twist-lock• 120 Outlets: 3-prong 20 amp duplex• Circuit breaker rating 20 amps• Panel opening 8˝ x 5⅛˝ • Face size 8½˝ x 6⅛˝• Mtg. studs 3/16˝ dia. • Size 4⅞˝ x 8½˝ x 6⅛˝c/c 6½˝ x 521/32˝ • Shpg. 4 lbs.

2 Just Arrived! www.surpluscenter.com8

115 VAC Fan Motors• New, made for Broan/Nutone fans. Ther-mal overload protection. Air over design.115 volt AC, single phase, open enclosure,continuous duty.

ITEM 10-2614$6.99SPECIFICATIONS• Model 5KSM84DFK132P • 1⅛˝ hex mounts each end• Amperage 0.56 Amps • Shaft 5/16˝ dia. x ⅜˝ w/flat• Speed 1550 RPM • Size 3.3˝ dia x 2½˝• Rotation CW • Shpg. 3 lbs.

ITEM 10-2613$7.99• Includes 5˝ cord with plug.SPECIFICATIONS • Mount 2 studs on back• Model 5KSM84DFK212AP 2⅞˝ c/c• Amperage 1.2 Amps • Shaft ¼˝ dia. x ⅞˝ w/flat• Speed 1550 RPM • Size 3.3˝ dia x 2˝• Rotation CCW • Shpg. 2 lbs.

800-488-3407 Index 3&

Buying and SellingIndustrial Surplus Since 1933

What is the Surplus Center?• We buy top quality products from overstocks, design changes and bank-ruptcies in order to pass great savings on to our customers. We buy onlyclean, new items because we know how important product reliability is toour customers. In addition to our surplus items, we also stock productsfrom major manufacturers to keep the products that you need on hand.

All of our products fit into these product classifications:• Brand new – New products that we buy directly from the manufacturerand keep in stock. These items include the manufacturer’s warranty.• New – Excess inventory that is new and unused. Quantities of surplusitems are limited; once we sell out we cannot order more. We support theseitems with a 90 day warranty.• New Takeoffs – Removed from UNUSED machinery. We support theseitems with a 90 day warranty.• Used – Equipment that was in use before we bought it. Applies to onlya few of our products. We support these items with a 90 day warranty.• All of our products have a warranty (full warranty details on page 146.)

3 Easy Ways To OrderOnline at

www.surpluscenter.comCall 800-488-3407

24 hours a day, 7 days a week

Fax your order to 877-474-5198We ship via UPS, USPS and Fedex Freight

Find detailed ordering & shipping information on pages 146 & 147

If you’re in the area visit ourshowroom in Lincoln, Nebraska!

• You can see and touch all of the products you find in both our catalogand at our website. Our knowledgeable staff would be glad to help youfind just the right item for your project.

• If you would like to pick up an order here, call or email your order. Pleasenote that orders picked up in Lincoln are subject to Nebraska sales tax.

To save time you may call, fax or email your order before pickup.We’ll have it ready when you get here!

1015 West O Street • Lincoln, NE 68528Phone 402-474-5167 • Fax 402-474-4359

[email protected]: 8-5 Mon.-Fri. 8-Noon Sat.

• It’s easy to get here from any direction. Our warehouse is approx. 1 milefrom Interstate 80. See the map below for details.

Next time you are in the area please stop in.

HSURPLUS CENTER

PRODUCT........................................PAGEAcme Rod (Lead Screws) .....................113Air

Cylinders........................................91Compressors ...........................92 - 93Pressure Switches ...........................96Tanks..............................................93Valves......................................94 - 95

Ammo Boxes .......................................180Automotive ......................................4 - 16Automotive Gauges...............................15Bearings .......................................98 - 100Blowers ......................................138 - 141Capacitors ...........................................122Casters .......................................168 - 174Clutches ................................................97Control Cables ....................................153Counters .............................................142Couplings ...........................114 - 115, 117Drawer Slides......................................154Engines.......................................4 - 7, 180Fans ...........................................138 - 141Fuel Transfer Pumps ...........................8 - 9Gauges...........................................88 - 90Gearboxes ..................................101 - 108Gearmotors

AC...............................128 - 129, 179DC......................................133 - 135

Gear Reducers ...........................101 - 108Gear Pullers ........................................153Heaters ...............................................154

PRODUCT........................................PAGEHydraulic

Cylinders.................................44 - 66Filters,Strainers ........................75 - 77Fittings ....................................82 - 87Gauges....................................88 - 90Hose .......................................80 - 81Motors.............................67 - 74, 179Mounts...........................................78Power Packs............................40 - 41Power Team 10,000 PSI...........42 - 43Pumps .............................32 - 42, 178Reservoirs................................75 - 76Quick Couplers ..............................82Valves, Control ........................18 - 25Valves, Flow ............................29 - 31Valves, Relief ............................29, 31Valves, Selector ..............................28Valves, Solenoid.................19, 26 - 27Valves, Steering.........................25, 30

Linear Actuators.........................136 - 137Motors

AC ......................................123 - 125Slide Bases ...................................127Controllers....................................132DC......................................130 - 1313 Phase ...............................126 - 127

ORDERING INFORMATION .....146 - 147Phase Converters.................................127Power Supplies....................................142Pressure Gauges.............................88 - 90PTO Shafts ..........................................121Pulleys........................................116 - 117

PRODUCT........................................PAGEPumps

Diaphragm...................................159Fuel Transfer................................8 - 9Hydraulic ................................32 - 42Pressure Washer ...........................159Engine Driven Transfer..................158Roller ...........................................160Submersible ........................162 - 163

Rake Teeth ............................................17Relays.........................................143 - 145Rod Ends .............................................121Roller Chain ........................................112Rollers.................................................154Seats.......................................10 - 13, 178Shaft Collars........................................114Shafting...............................................113SHIPPING INFORMATION .......146 - 147Sprockets ...................................109 - 111Switches.....................................148 - 152Sump Pumps ..............................162 - 163Toggle Clamps.......................................17Trailer Jacks...........................................16Transaxles............................................120U-Joints...............................................113V-Belts .......................................118 - 119Vacuum Pumps .....................................93Water Pumps..............................156 - 163Wheels ...............................164 - 167, 175Winches .............................176 - 177, 179

Prices subject to change.Quantities limited to surplus items on hand.

18 HP Briggs & StrattonVanguard

Engine

ITEM 28-1792$1099.99

• New, BRIGGS and STRATTON VAN-GUARD commercial Series V-twin horizon-tal crankshaft engine. Features includeoverhead valves, cast iron cylinder sleeves,pressurized lubrication system with oil filter,9 amp alternator, 12 volt DC electric startwith keyswitch, float style carburetor andmuffler. Chrome wire guard over muffler.SPECIFICATIONS• Model 356447-0234G1 • Shaft 1˝ dia. x 229/32˝• Power 18 HP w/ ¼˝ keyway,• Bore/Stroke 2.83˝ x 2.75˝ tapped ⅜-24• Disp. 570 cc. • Mount 7.68˝ x 4.02˝• Speed 3600 RPM • Accessory mount 5˝ B.C.,• Start electric 12 VDC 6.5˝ B.C., 7.75˝ B.C.Recoil backup • No fuel tank

• Alternator 9 Amps • Size 20˝ x 16˝ x 17˝• Shaft horizontal • Shpg. 130 lbs.

Special handling requires truck freight only.

23 HP VanguardEngine

ITEM 28-1712$1349.99

• New, BRIGGS AND STRATTON Van -guard V-twin horizontal crankshaft engine.Supplied with fuel pump. No fuel tank ormuffler. Pressurized lubrication systemwith oil filter and cooler. 16 amp alternator.Cast iron cylinder sleeve, low oil alert, floatstyle carburetor. Keyswitch on front.SPECIFICATIONS• Shaft 1˝ dia. x 229/32˝• Model 386447-0079 w/ ¼˝ keyway, tapped ⅜-24• Power 23 HP • Mount 7.68˝ x 4.02˝• Bore/Stroke 2.97˝ x 2.76˝ • Accessory mount 5˝ B.C.,• Disp. 627 cc. 6.5˝ B.C., 7.75˝ B.C.• Speed 3600 RPM • No fuel tank• Start electric • Size 16.1˝ x 12.3˝ x 17.7˝• Shaft horizontal • Shpg. 150 lbs.

Truck freight only.

18 HP Briggs & StrattonVanguard

Engine

ITEM 28-1781$1099.99

• New, BRIGGS & STRATTON Vanguardcommercial series V-twin horizontal crank-shaft engine. Features include overheadvalves, cast iron cylinder sleeves, pressur-ized lubrication system with oil filter, 9 ampalternator, 12 volt DC electric start withkeyswitch, float style carburetor and ex-haust manifold. No muffler.SPECIFICATIONS • Shaft 1˝ dia. x 229/32˝• Model 356447-0213 w/ ¼˝ keyway,• Power 18 HP tapped ⅜-24• Bore/Stroke 2.83˝ x 2.75˝ • Mount 7.68˝ x 4.02˝• Disp. 570 cc. • Accessory mount 5˝ B.C,• Speed 3600 RPM 6.5˝ B.C, 7.75˝ B.C.• Start electric 12 VDC • Fuel tank 9 quart• Alternator 9 Amps • Size 13½˝ x 17½˝ x 21½˝• Shaft horizontal • Shpg. 130 lbs.


4 Horizontal Engines www.surpluscenter.com8

Powerpro Gas Engines• Brand new, PowerPro series horizontal shaft engines. Powerful performance and tech-nologically advanced features in a compact package to provide years of reliable service.Engines feature overhead valves, cast iron sleeve liner, mechanical governor, low-oil sen-sor, and electronic ignition. Forced air cooling system. One year warranty. EPA certifiedfor emission standards. Not for sale or use in California.

Horizontal Shaft Honda Recoil Start Engines• New, HONDA GX series horizontal shaft engine. Honda is the world’s largest manufacturer of en-gines and has earned its reputation for unsurpassed quality, performance and reliability. Enginesfeature overhead valves, cast iron sleeve liner, mechanical governor, low-oil sensor, and electronicignition. Meets EPA and CARB emission regulations for all states.

9 HPITEM 28-1698 $409.95SPECIFICATIONS• Model HY270 • Shaft 1˝ dia. x 3⅝˝ keyed• PowerPro OHV Series tapped 7/16-20• Power 9 HP • Base mount four hole on• Torque 14 ft-lbs 3½˝ x 711/16˝ centers• Bore/Stroke 3.03˝/2.28˝ • Accessory mount• Displ. 16.47 cu. inch Inner 4.4˝ B.C.• Speed 3600 RPM Outer 6.5˝ B.C.• Start recoil • Size 13˝ x 17˝ x 16˝• Fuel tank 1.6 gallon • Shpg. 70 lbs.

ITEM 28-1698-E $480.95• Same as ITEM 28-1698 above exceptelectric/recoil start.

13 HPITEM 28-1699 $455.95SPECIFICATIONS• Model HY390 • Shaft 1˝ dia. x 3⅝˝ keyed• PowerPro OHV Series tapped ⅜-24• Power 13 HP • Base mount four hole on• Torque 19.6 ft-lbs 3¾˝ x 711/16˝ centers• Bore/Stroke 3.46˝/2.51˝ • Accessory mount• Displ. 23.73 cu. inch Inner 5.0˝ B.C.• Speed 3600 RPM Outer 6.5˝ B.C.• Start recoil • Size 14½˝ x 18˝ x 17˝• Fuel tank 1.7 gallon • Shpg. 81 lbs.

ITEM 28-1699-E $526.95• Same as ITEM 28-1699 above exceptelectric/recoil start. Shpg. 85 lbs.

6.5 HPITEM 28-1697 $223.95SPECIFICATIONS• HP 6.5 • Shaft ¾˝ dia. x 27/16˝ keyed• RPM 3600 tapped 7/16-20• Displ. 12 cu. in. • Accessory mount• Bore/stroke 2.7˝ x 2.1˝ 4 bolt on 3⅝˝ bolt circle• Fuel tank cap. 3.88 qt. • Size 14⅞˝ x 12⅜˝ x 13¼˝• Oil capacity 0.63 qt. • Shpg. 46 lbs.

ITEM 28-1697-E $294.95• Same as ITEM 28-1697 above exceptelectric/recoil start. Shpg. 48 lbs.

9 HPITEM 28-1693$499.99

SPECIFICATIONS • Shaft horizontal• Model GX390 • Shaft 1˝ dia. x 321/32˝ keyed,• Engine family GX tapped 7/16-20 UNF• Power 9 HP • Base mount 4 hole• Torque 13.1 ft-lbs on 3½˝ x 711/16˝ centers• Bore/Stroke 3.0˝/2.3˝ • Accessory mount• Disp. 16.5 cu. inch Inner 4 bolt on 4.4˝ B.C.,• Speed 3600 RPM Outer 4 bolt on 6.5˝ B.C.• Start recoil • Size 15˝ x 16⅞˝ x 16⅛˝• Fuel tank 1.4 gallon • Shpg. 66 lbs.

13 HPITEM 28-1694$569.99

SPECIFICATIONS • Shaft horizontal• Model GX270 • Shaft 1˝ dia. x 321/32˝ keyed,• Engine family GX tapped ⅜-24 UNF• Power 13 HP • Base mount 4 hole• Torque 18.5 ft-lbs on 4˝ x 711/16˝ centers• Bore/Stroke 3.5˝/2.5˝ • Accessory mount• Disp. 23.7 cu. inch Inner 4 bolt on 4.4˝ B.C.,• Speed 3600 RPM Outer 4 bolt on 6.5˝ B.C.• Start recoil • Size 15⅞˝ x 17¾˝ x 177/16˝• Fuel tank 1.6 gallon • Shpg. 89 lbs.

6.5 HPITEM 28-1692$349.99

SPECIFICATIONS• Model GX200UT • Shaft horizontal• Engine family GX • Shaft ¾˝ dia. x 27/16˝ keyed,• Power 6.5 HP tapped 5/16-24 UNF• Torque 9.1 ft-lbs • Base mount 4 hole• Bore/Stroke 2.7˝/2.1˝ on 3˝ x 6⅜˝ centers• Disp. 12.0 cu. inch • Accessory mount• Speed 3600 RPM 4 bolt on 3⅝˝ B.C.• Start recoil • Size 12⅝˝ x 14⅞˝ x 13¼˝• Fuel tank 3.3 quarts • Shpg. 46 lbs.

7.8 HP Briggs & StrattonVanguard

Engine

ITEM 28-1782$299.99

• New, BRIGGS & STRATTON Vanguardhorizontal engine. Cast iron sleeve, over-head valves. Low oil shutdown.SPECIFICATIONS • Shaft 1˝ dia. x 321/32˝• Model 138432-0166 w/keyway• Power 7.8 HP • Mount 3½˝ x 7¾˝• Speed 3600 RPM • Accessory mount• Start recoil 6½˝ BC w/5¾˝ pilot• Shaft horizontal • Size 14½˝ x 11˝ x 16˝• Fuel tank 1 gallon • Shpg. 56 lbs.

Briggs & Stratton 850Engine

ITEM 28-1780$219.99

• New BRIGGS & STRATTON 850 Series.Convertible throttle, manual choke.SPECIFICATIONS • Shaft ¾˝ dia. x 2.42˝• Model 120232 tapped ¼-28• Power 8.50 ft.lbs. torque • Mount 6⅜˝ x 3⅛˝• Disp. 205 cc. • Accessory mount• Speed 3600 RPM 3⅝˝ B.C, 1⅝˝ pilot• Start recoil • Size 15½˝ x 10˝ x 14˝• Fuel tank 3 quart • Shpg. 38 lbs.

Briggs & Stratton525 Series

EngineITEM 28-1743$199.95

• New BRIGGS & STRATTON 525 Series.Convertible throttle, manual choke.SPECIFICATIONS• Model 97302-0016 • Shaft ¾˝ dia. x 2.42˝• Power 5.25 ft-lb. torque tapped ¼-28• Disp. 148 cc. • No accessory mount• Speed 3600 RPM • Fuel tank 2.2 qt.• Start recoil • Size 13½˝ x 8½˝ x 13½˝• Mount 6⅜˝ x 3⅛˝ • Shpg. 32 lbs.

5½ HP TecumsehSnow KingEngine

ITEM 28-1740$129.95• New, TECUMSEH Snow King engine.Overhead valve design. Preset throttle andmanual choke control. Large pull handlefor easy starting. Muffler included. No aircleaner or fuel tank. Extended oil draintube. Fuel primer shipped loose.SPECIFICATIONS • Shaft 1˝ dia. x ½˝ long• Model OH195SA-7554 stepped to ⅞˝ dia. x 21/16˝• Power 5.5 HP stepped to ⅝˝ dia. x ¾˝• Bore/Stroke Total length 3⅜˝• Disp. 195 cc. Keyway on ⅞˝ and ⅝˝• Speed 3600 RPM part of shaft 3/16˝ wide• Start recoil Drilled and tapped 5/16-24• Shaft horizontal • Mount four bolt base on• No fuel tank 3⅛˝ x 6⅜˝ centers• Size 10˝ x 14˝ x 13˝ • Accessory mount• Shpg. 35 lbs. 25/16˝ x 25/16˝

5.5 HP PowerProEngine

w/2:1 Reduction

ITEM 28-1772 $219.99• New, PowerPro Model 2541-0052 hori-zontal shaft engine. Integral chain drive re-ducer cuts output speed to ½ of engineRPM. Feature overhead valves, cast ironsleeve liner, mechanical governor, low-oilsensor, and electronic ignition. MeetsCARB and EPA emission regulations.SPECIFICATIONS• Power 5.5 HP • Shaft ¾˝ diam. x 2˝• Bore/Stroke 2.7˝ x 1.8˝ w/3/16˝ keyway,• Disp. 9.9 cu. inch tapped 8mm-1.0• Output speed 1800 RPM • Acc. mnt. 4 bolt 3˝ B.C.• Start recoil • Fuel tank 3.88 qt.• Shaft horizontal • Size 14⅜˝ x 12⅜˝ x 13¼˝• Mount 6⅜˝ x 3˝ • Shpg. 42 lbs.

6 HP Tecumseh RecoilStart

EngineITEM 28-1658$199.95

• New,TECUMSEH

Enduro PowerSport Series hori-

zontal shaft engine. Ideal engine for go-carts, mini bikes and other self-propelledapplications that require a spring loadedthrottle. Overhead valve design for supe-rior performance and fuel economy. Built-in ON/OFF switch and wire lead for remoteengine stop.SPECIFICATIONS• Model OHH60 • Shaft ¾˝ dia. x 2½˝• Engine family 2TPXS.1951AB keyed, tapped 5/16˝-24• Power 6 HP • Base mount four hole on• Bore/Stroke 2.80˝/1.94˝ 3⅛˝ x 6⅜˝ centers• Disp. 11.88 cu. in. • Accessory mount 4 bolt• Speed 3600 RPM on 3⅝˝ bolt circle• Start recoil • Size 10¼˝ x 14˝ x 14¼˝• Fuel tank 3 quart • Shpg. 36 lbs.

800-488-3407 Horizontal Engines 5&

Briggs & Stratton 525SeriesEngineWith 6:1 GearReducer

ITEM 28-1744$319.95• New, BRIGGS & STRATTON 525 Serieswith 6:1 gear reducer. Manual throttle andchoke controls.SPECIFICATIONS• Model 97352-0049 • Shaft ¾˝ dia. x 2˝ w/keyway• Power 5.25 ft-lbs torque • Mount 3⅛˝ x 6⅜˝• Speed 600 RPM • Fuel tank 2.2 qt.• Start recoil • Size 12¼˝ x 12¾˝ x 12¼˝• Shaft horizontal • Shpg. 40 lbs.

10 HP TecumsehEngine

ITEM 28-1741$134.95• New, TECUM-SEH horizontalengine built fordriving electricgenerators. Cast

iron sleeve, fixedspeed governor. Low oil shutdown.Lighted on/off switch. Not for sale or usein California.SPECIFICATIONS• Model LH358XA-15493 • Shaft 1⅜˝ dia. x 1⅛˝,• Power 10 HP stepped to ⅞˝ dia. x 1⅞˝• Speed 3600 RPM then tapered• Start recoil OA length 4.33˝• Shaft horizontal tapped 5/16-24 no keyway• No fuel tank • Mount 3¼˝ x 6⅜˝• Size 12˝ x 13½˝ x 13˝ • Accessory mount• Shpg. 60 lbs. 4 bolt on 3⅝˝ B.C.


Engine

ITEM 28-1785 $249.99• New, BRIGGS & STRATTON Intek over-head valve horizontal shaft gas engine.Features manual choke, on/off switch, fuelshutoff valve.SPECIFICATIONS• Model 150212-0119-E9 • Shaft horizontal• Engine family 7BSXS.2492HL • Shaft ¾˝ dia. x 25/16˝• Power 8 HP w/keyway• Torque 11.50 ft-lbs. • Mount 3⅛˝ x 6⅜˝• Bore/Stroke 2.97˝/2.20˝ • Accessory mnt. 3⅝˝ B.C.• Disp. 250 cc. • Fuel tank 1.6 qt.• Speed 3600 RPM • Size 16½˝ x 12¼˝ x 16¼˝• Start recoil • Shpg. 40 lbs.

ITEM 28-1695$138.95

• Brand new, Power-Pro series horizontalshaft engine. Power-ful performance andtechnologically ad-

vanced features in a com-pact package to provide years of reliableservice. Mechanical governor with control.Oil alert system shuts off engine if oil goesbelow an unsafe level. EPA emissions com-pliant. Not for sale in California.SPECIFICATIONS • Shaft ⅝˝ diam. x 27/16˝• 2.5 HP w/keyway• 3600 RPM • 4 bolt 3⅝˝ B.C. auxiliary• Displ. 5.92 cu. in. mount on PTO side• Bore/stroke 2.05˝ x 1.77˝ • Size 9˝ x 10½˝ x 14¼˝• Fuel tank capacity 1½ qt. • Shpg. 25 lbs.

2.5 HP PowerproGas Engine

12.5 HP Briggs & StrattonVerticalEngine

ITEM 28-1765 $419.95• New, BRIGGS & STRATTON verticalshaft I/C single cylinder overhead valve en-gine. Features Anti-Vibration System forsmooth operation. Includes quiet mufflerand fuel pump. Cast iron cylinder, dual airfilter and heavy duty bearing. Not for salein California.SPECIFICATIONS • Shaft vertical• Model I/C219802-0597-E1• Crankshaft 1˝ dia. x 35/32˝• Engine family 7BSXS.3442VM w/keyway• Power 12.5 HP • Crankshaft thread 7/16-20• Bore/Stroke 3.44˝ x 2.27˝ • Mount 4 holes on 10˝ B.C.• Displ. 344 cc. • No fuel tank• Speed 3400 RPM • Size 17.8˝ x 15.5˝ x 12.9˝• Start recoil • Shpg. 75 lbs.

18 HP Briggs IntekVerticalEngine

ITEM 28-1798$499.95• New, BRIGGS & STRATTON Intek twincylinder engine. Cast iron cylinder sleeves.12 volt electric start and 16 amp alternator.Low oil shutdown, oil filter and fuel pumpincluded. No fuel tank or muffler.SPECIFICATIONS• Model 405577-0114G1 • Shaft vertical• Power 18 HP • Shaft 1˝ dia. x 3.16˝• Bore/Stroke 2.97˝ x 2.89˝ tapped 7/16-20• Disp. 40.03 cu. inch • Mount 10˝ B.C.• Speed 3400 RPM • Size 18˝ x 18˝ x 14˝• Start electric • Shpg. 120 lbs.


20 HP KawasakiEngine

ITEM 28-1797$569.95• New, KAWASAKI twin cylinder verticalshaft gas engine. Features cast iron cylin-der sleeve, 15 amp alternator. 12 volt DCfuel shut off valve. Oil filter and fuel pump.No fuel tank or muffler.SPECIFICATIONS• Model FR600V-AS05R • Shaft vertical• Engine family 8KAX6.6032 • Shaft 1˝ dia. x 3.16˝• Power 20 HP tapped 7/16-20• Bore/Stroke 2.9˝ x 2.8˝ • Mount 10˝ B.C• Disp. 603 cc. • No fuel tank • Speed 3600 RPM • Size 19˝ x 17˝ x 14˝• Start key • Shpg. 105 lbs.


6.5 ft-lbs. Briggs & StrattonEngine

ITEM 28-1770 $89.95• New, BRIGGS & STRATTON verticalshaft engine. Snowblower applications, noair cleaner. Fixed speed governor. Specialheavy flywheel. Manual choke.SPECIFICATIONS• Model 120502-0255-E1 • Shaft ¾˝ dia. x 2.43˝• Engine family 7BSXS.1901SW w/keyway, tapped 5/16˝-20• Displacement 190 cc • Mnt. 3 hole, 8˝ bolt circle• Power 6.5 ft-lbs. torque • Fuel tank 1 quart• Speed 3100 RPM • Size 14˝ x 11˝ x 9¾˝• Start recoil • Shpg. 35 lbs.

Kohler CourageSeriesVerticalEngines

• New, KOHLER Courage Series, twincylinder, vertical shaft gas engine. Alu-minum block with cast iron cylinder liners.Features include 12 volt DC electric start,crossflow cylinder head with overheadvalves, pressurized lubrication with filter,electronic ignition, fuel pump, float typecarburetor, and 12 volt DC 15 amp alter-nator. No fuel tank or muffler.SPECIFICATIONS FOR ALL• Engine family • Shaft verticalCourage Series • Shaft 1˝ dia. x 35/32˝ keyed,

• Bore/Stroke 3.3˝/2.6˝ tapped 7/16-20• Disp. 44 cu. inch • Oil capacity 2 quarts• Speed 3600 RPM • Mount 4-bolt on 10˝ B.C.• Start electric • Size 18.5˝ x 17.8˝ x 13.4˝

25 HP Pro SeriesITEM 28-1805 $599.95SPECIFICATIONS • Power 25 HP• Model SV830-0013 • 12 volt fuel shut-off• Commercial grade • Peak torque 44.8 lb./ftCourage PRO Series • Shpg. 125 lbs.


20 HPITEM 28-1803 $489.95SPECIFICATIONS• Model SV710-0015 • Peak torque 38.4 lb.ft.• Power 20 HP • Shpg. 110 lbs.


23 HPITEM 28-1804 $519.95SPECIFICATIONS• Model SV720-0032 • Peak torque 43.5 lb.ft.• Power 23 HP • Shpg. 110 lbs.


20 HP KohlerCourageVerticalEngineITEM 28-1790$499.95• New, KOHLER Courage series, twincylinder, vertical shaft gas engine. Ideal forlawn mower replacement or buildingequipment. Aluminum block with cast ironcylinder liners. Features include 12 volt DCelectric start, crossflow cylinder head withoverhead valves, pressurized lubricationwith filter, electronic ignition, fuel pump,float type carburetor, and 12 volt DC 15amp alternator. No fuel tank or muffler.SPECIFICATIONS • Start electric• Model PS-SV710-0026 • Shaft vertical• Engine family Courage Series • Shaft 1⅛˝ dia. x 4.3˝ keyed• Power 20 HP tapped 7/16-20• Bore/stroke 3.3˝/2.6˝ • Oil capacity 2 quarts• Disp. 44 cu. inch • Mount 4-bolt on 10˝ B.C.• Peak torque 38.4 lb.ft • Size 18.5˝ x 17.8˝ x 13.4˝• Speed 3600 RPM • Shpg. 110 lbs.


26 HP Kawasaki LiquidCooledVerticalEngine

ITEM 28-1714$979.95• New, KAWASAKI liquid cooled vertical V-twin gas engine. Overhead valve design.Cast iron cylinder sleeves. Pressurized lu-brication system with filter. Oil pressureand water temperature safety switches.Under deck mount muffler included.SPECIFICATIONS• Model FD731V-BS07 • Shaft 1-1/8˝ dia. x 4-1/4˝• Power 26 HP tapped 7/16-20• Bore/Stroke 2.96˝ x 2.99˝ • Mount 10˝ B.C. with four• Disp. 675 cc. untapped 0.335˝ mtg. holes• Speed 3600 RPM • No fuel tank• Start electric • Size 15˝ x 22˝ x 19˝• Shaft vertical • Shpg. 165 lbs.

Truck freight only.

6 Vertical Engines www.surpluscenter.com8

27 HP Kohler VerticalShaft

V-TwinEngine

ITEM 28-1767$949.95

• New, KOHLER Command Series V-twinvertical shaft gas engine. Ideal for lawnmower replacement or building equipment.Aluminum block with cast iron cylinder liners.Features include 12 volt DC electric start,overhead valves, pressurized lubrication withfilter and cooler, electronic ignition, fuelpump, float type carburetor, and 12 volt DC15 amp alternator. No muffler or fuel tank.SPECIFICATIONS• Model CV740S • Speed 3600 RPM• Engine spec CV740-0030 • Start electric• Engine family • No fuel tank5KHXS.7252GC • Shaft 1˝ dia. x 35/32˝• Power 27 HP keyed, tapped 7/16-20• Torque 42 ft-lbs • Mount 4 bolt on 10˝ BC• Bore/Stroke 3.3˝/2.6˝ • Size 21¼˝ x 17¾˝ x 14½˝• Disp. 44 cu. inch • Shpg. 145 lbs.


Ordering Information& Shipping Rateson pages 146 - 147

25 HP Robin/SubaruEngine

ITEM 28-1703 $1449.95• New, ROBIN SUBARU twin cylinder over-head valve horizontal engine. Electric startwith 15 amp alternator. No fuel tank or muf-fler. Includes oil cooler and fuel pump.SPECIFICATIONS• Model EH722DS • Shaft 1⅛˝ dia. x 4˝• Power 25 HP w/keyway• Bore/Stroke 3.31˝ x 2.56˝ • Mount 7.68˝ x 4.02˝/4.65˝• Disp. 720 cc. • Accessory mount 4 bolt• Speed 3600 RPM 5˝ B.C., 6.5˝ B.C., 7.75˝ B.C.• Start key • Size 17˝ x 13½˝ x 19˝• Shaft horizontal • Shpg. 145 lbs.


Radiator

ITEM 28-1737$199.99• New, RADIATORSPECIALTIES ModelRS-5770 radiator.Originally designedfor use with an inter-cooler for Perkins1104 diesel engines.Intercooler sold separately (our ITEM 28-1761). Pressure cap rated to 15 PSI.SPECIFICATIONS• 6 core radiator • Overflow connection• Coolant heat rejection ¼˝ hose barb2901 BTU/min • Mount four 5/16˝-18 holes• Hose connections on 6˝ centers2⅛˝ diam. hose barb • Size 33⅞˝ x 15¾˝ x 6⅝˝• Drain ½˝ NPT w/ petcock • Shpg. 50 lbs.

51 HP Lombardini WaterCooled Engine

w/Radiator

ITEM 28-1802 $4199.99• New, LOMBARDINI 4 cylinder watercooled diesel engine. Model LDW2204/ -GE. Furnished complete with radiator, aircleaner and muffler. Keyswitch electricstart. Governor set at 1800 RPM.SPECIFICATIONS• Model LDW 2204/GE • Speed 3000 RPM max.• Engine family • Bell housing6LBDL2.19CHP Size SAE 5

• Power Bolt holes ⅜-1651 HP at 3000 RPM Hole spacing 13⅛˝ B.C.

• Torque • Flywheel144 NM at 2000 RPM Size SAE 7½

• Bore/Stroke 88 x 90.4 Bolt holes 5/16-18• Disp. 2199 cc. Hole spacing 8¾˝ B.C.• Fuel consumption • Overall size 36˝ x 24˝ x 26˝1.85 gal/hr at 22.5 KW • Shpg. 350 lbs.

Truck freight only.

Kohler Command Pro23 HPEngine

ITEM 28-1800$1395.00• New, Kohler Command-Pro SeriesModel CH23S. Output is socket for hy-draulic pump with SAE A 2 bolt mount.Twin cylinder OHV design with hydrauliclifters. Cast iron cylinder liners. Press urizedlubrication system with oil filter. 12 Volt DCelectric start, 15 amp alternator. Includeskeyswitch, manual throttle and choke. Noair cleaner, muffler or fuel tank.SPECIFICATIONS• Model CH23S-76640 • Start keyswitch/electric• Engine Family • Shaft horizontal7KHXS-7252GC • Shaft ⅞-13 tooth

• Power 23 HP socket for pump• Bore/Stroke 3.2˝ X 2.6˝ • No fuel tank• Disp. 41.1 cu. inch • Size 16˝ x 18˝ x 21˝• Speed 3600 RPM • Shpg. 130 lbs.


10 HP Horizontal ShaftAir Cooled

DieselEngine

ITEM 28-1768$791.95

• Brand new, TORQ DIESEL POWER hor-izontal shaft engine. Features include di-rect fuel injection, lever decompression foreasier starting, 12 VDC electric start withrecoil backup, throttle control lever, oil filterand charging system. Meets EPA emissionregulations for all states except CA. Not forsale or use in California.SPECIFICATIONS• Model TD1000E • Shaft 25mm dia. x• Power 10 HP 3⅝˝ keyed,• Bore/Stroke 3.4˝/2.8˝ tapped 7/16-20 UNF• Disp. 25.5 cu. inch • Base mount four hole on• Speed 3600 RPM 315/16˝ x 1011/16˝ ctrs.• Start electric/recoil Inner 4 bolt on 3⅝˝ B.C.• Fuel tank 1.4 gallon Outer 4 bolt on 6½˝ B.C.• Shaft horizontal • Size 17˝ x 17¾˝ x 19˝• Accessory mount • Shpg. 140 lbs.


800-488-3407 Diesel Engines 7&

Skid SteerRadiator

ITEM 28-1715$299.99• New, CoPAR Model 86534248 radiatororiginally built for use with skid steer dieselengines. Copper and brass constructionwith a painted steel housing. Hose con-nections point straight out. Four throughholes for attaching a fan (not included). FitsNew Holland skid steer Models LS170 andLX665.SPECIFICATIONS• 5 core radiator • Drain port ¼˝ NPT• Hose connections • Mount two ⅜˝-16 tapped1⅜˝ hose-barbs holes on ea. side 2¾˝ ctrs.• Core dimensions • Size 18½˝ x 23¼˝ x 5¾˝173/16˝ x 18¼˝ x 3¼˝ • Shpg. 26 lbs.

Dual Element IndustrialAir

Cleaner

ITEM 28-1711-A $79.99• New, dual element air cleaner. Swirl flowremoves dirt before it enters element. Vac-tuator releases pre-cleaned dust.SPECIFICATIONS• Airflow 275 CFM max. • Outer Element 222421A1• Inlet 3¾˝ dia. • Inner Element 222422A1• Outlet 3½˝ dia. • Size 8⅞˝ dia. x 18˝• No mounting strap • Shpg. 7 lbs.

Dual ElementIndustrialAir Cleaner

ITEM 28-1779$79.99• New, FLEETGUARD dual element aircleaner. Pre-cleaner removes dirt before itenters element. Vactuator releases pre-cleaned dust automatically. Includes con-nector hose to engine.SPECIFICATIONS • Outer element FG25551• Engine size 16-26 HP • Inner element FG25552• Outlet 2˝ dia. • Size 6˝ dia. x 11½˝• Mounting 2 hole 3⅛˝ c/c • Shpg. 6 lbs.

Lombardini 22.8 HPDieselEngine

ITEM 28-1801$2195.00

• New, LOMBARDINI Model 12LD475-2-ED3A02R1 two cylinder diesel engine.Output is socket for hydraulic pump withSAE A 2 bolt mount. OHV design. Cast Ironcylinder liners. Pressurized lubrication sys-tem with oil filter. 12 Volt DC electric start,18 amp alternator. Fuel shutoff solenoid.Cast iron exhaust manifold. No air cleaner,muffler, keyswitch or fuel tank.SPECIFICATIONS • Start electric• Model • Shaft horizontal12LD475-2-ED3A02R1 • Shaft ⅞-13 tooth

• Power 22.8 HP socket for pump• Disp. 954 cc • No fuel tank• Bore/Stroke 90mm x 75mm • Size 19˝ x 18˝ x 20˝• Speed 3600 RPM • Shpg. 220 lbs.

Truck freight only.

8 Fuel Transfer Pumps www.surpluscenter.com8

12 VDC 8 GPMFuel TransferPump

ITEM 28-1664 $226.95• Model EZ-8. Lightweight and easy to use,ideal for on-the-go fueling. Delivers up to 8GPM, equivalent to gas station flow rates.Corrosion resistant cast aluminum body,manual nozzle operation, ON/OFF switch,trim-to-fit 3 piece suction tube, 2˝ NPTmale tank mount, 15 foot cord.SPECIFICATIONS • Temperature range• Voltage 12 DC -20°F to +125°F• Amperage 11 amps • Inlet mount 2˝ NPT• Flow 8 GPM max. • Inlet ¾˝ NPT• Pressure 15 PSI max. • Outlet ¾˝ NPT• Nozzle type manual • Suction lift up to 5½ ft.• Nozzle size ¾˝ diam. • Duty 15 min. ON/30 min. OFF• Discharge hose • Size 8˝ x 7˝ x 6½˝⅝˝ diam. x 10 ft. • Shpg. 18 lbs.

GPI Fuel Transfer Pumps• Brand new, GPI. All GPI products are compatible with gasoline (up to 15% alcohol blends suchas E15), diesel fuel (up to 20% biodiesel blends such as B20) and kerosene. All models have selfpriming pump with weatherproof housing, and UL listed thermally protected motor.

115 VAC Fuel Transfer Pumps

12 GPM• For use on above ground vented storagetanks. Convenient spin collar mount foreasy installation. Corrosion resistant castaluminum body, ON/OFF switch, adjusta -ble suction tube, 2˝ NPT male spin collartank mount.SPECIFICATIONS • Temperature range• Amperage 1.5 amps -20°F to +125°F• Flow 12 GPM max. • Inlet mount 2˝ NPT• Pressure 15 PSI max. • Inlet 1˝ NPT• Nozzle size ¾˝ diameter • Outlet ¾˝ NPT• Discharge hose • Suction lift up to 4.8 ft.¾˝ diam. x 12 ft. • Size 10˝ x 9½˝ x 8˝

• Duty 30 min. ON/30 min. OFF • Shpg. 25 lbs.Automatic Nozzle Operation

ITEM 28-1667-A $387.95• Model M-1115S-AU.Manual Nozzle Operation

ITEM 28-1667-M $346.95• Model M-1115S-MU.

20 GPM• For use on vented, fixed location, in orabove ground, storage tanks. Carbongraphite vane pump with cast iron body,ON/OFF switch, 2˝ NPT male centered tankmount. Suction pipe not included.SPECIFICATIONS • Temperature range• Amperage 4.9 amps -20°F to +125°F• Flow 20 GPM max. • Inlet mount 2˝ NPT• Pressure 50 PSI max. • Inlet 1˝ NPT• Nozzle size ¾˝ diam. • Outlet ¾˝ NPT• Discharge hose • Dry prime up to 15 ft.¾˝ diam. x 12 ft. • Size 13½˝ x 8˝ x 10¾˝


ITEM 28-1668-A $534.95• Model M-3120-AL.Manual Nozzle Operation

ITEM 28-1668-M $493.95• Model M-3120-ML.

12 VDC Fuel Transfer Pumps

15 GPM• For use on above ground vented storagetanks. Convenient spin collar mount foreasy installation. Corrosion resistant castaluminum body, ON/OFF switch, adjusta -ble suction tube, 2˝ NPT male spin collartank mount, 15 foot cord.SPECIFICATIONS • Temperature range• Amperage 18 amps -20°F to +125°F• Flow 15 GPM max. • Inlet mount 2˝ NPT• Pressure 15 PSI max. • Inlet 1˝ NPT• Nozzle size ¾˝ diameter • Outlet ¾˝ NPT• Discharge hose • Suction lift up to 4.8 ft.¾˝ diam. x 12 ft. • Size 10˝ x 9˝ x 8˝


ITEM 28-1665-A $363.95• Model M-150S-AU.Manual Nozzle Operation

ITEM 28-1665-M $322.95• Model M-150S-MU.

25 GPM• For use on vented petroleum storagetanks, either in or above ground. Carbongraphite vane pump with cast iron body,ON/OFF switch, 2˝ NPT male tank mount,15 foot cord. Suction pipe not included.SPECIFICATIONS • Temperature range• Amperage 35 amps -20°F to +125°F• Flow 25 GPM max. • Inlet mount 2˝ NPT• Pressure 15 PSI max. • Inlet 1˝ NPT• Nozzle size 1˝ diameter • Outlet 1˝ NPT• Discharge hose • Dry prime up to 15 ft.1˝ diam. x 12 ft. • Size 13¼˝ x 7˝ x 12˝• Duty 30 min. ON/30 min. OFF • Shpg. 62 lbs.Automatic Nozzle Operation


ITEM 28-1666-M $503.95• Model M-3025-ML.

115/230 VAC, 30 GPM FuelTransferPumps

• For use on vented, fixed location, in orabove ground, storage tanks. Carbongraphite vane pump with cast iron body,ON/OFF switch, 2˝ NPT male centered tankmount. Suction pipe not included.SPECIFICATIONS • Temperature range• Amperage 9.8/4.9 amps -20°F to +125°F• Flow 30 GPM max. • Inlet mount 2˝ NPT• Pressure 50 PSI max. • Inlet 1¼˝ NPT• Nozzle size 1˝ diameter • Outlet 1˝ NPT• Discharge hose • Dry prime up to 15 ft.1˝ diam. x 12 ft. • Size 17˝ x 8½˝ x 11˝



ITEM 28-1669-M $949.95• Model M-3130-ML.

FuelMeters

28-1671 28-1796

3-30 GPM Electronic Digital Fuel Meter

ITEM 28-1671 $137.95• Use on gravity or pump flow systems. In-cludes aluminum housing, turbine rotormeter design, four digit LCD display, andcumulative or batch totals with batch totalresettable to zero.SPECIFICATIONS • Ports 1˝ NPT• Flow range 3-30 GPM • Port adapter (2)• Pressure 300 PSI max. ¾˝ NPT bushings• Accuracy +/- 2.5% • Size 4˝ x 2˝ x 2½˝• Temp. range +14°F to +130°F• Shpg. 3 lbs.5-30 GPM Mechanical Fuel Meters• Use on pump flow systems only. Includesaluminum housing, nutating disc meter de-sign, four digit resettable batch display,seven digit cumulative display, field ad-justable fuel calibration, and 90° inlet/ outletport rotation adapters. Cali brated at thefactory for diesel fuel use.SPECIFICATIONS • Temp. range• Flow range 5-30 GPM -40°F to +130°F• Pressure 50 PSI max. • Size 6½˝ x 5¾˝ x 6½˝• Accuracy +/- 2% • Shpg. 9 lbs.

ITEM 28-1796-75 $145.95• Model MR-530-G6N. Ports ¾˝ NPT.

ITEM 28-1796-100 $155.95• Model MR-530-G8N. Ports 1˝ NPT.

800-488-3407 Fuel Hand Pumps & Accessories 9&

Fuel ShutoffValve

ITEM 20-1341$9.99• New, military surplus fuel shut-off valve.SPECIFICATIONS• Ports ½˝ NPT • Mount 2 bolts 113/16˝ ctrs.• Shaft ½˝ O.D. x 13/16˝ • Size 2⅝˝ x 2⅜˝ x 2˝w/crosshole & screw-driver slot• Shpg. ½ lb.

1˝ NPT FuelNozzle ForUnleaded GasITEM 28-1776-100$19.95• New, OPW Model 811P-5055 manualutility fuel nozzle. Buna-N seals. Aluminumalloy with zinc plated steel lever.SPECIFICATIONS • Pressure 50 PSI max.• Inlet 1˝ NPT • Tube lgth. 9˝ curved• Discharge • Size 12˝ x 7˝ x 2˝13/16˝ for unleaded gas • Shpg. 3 lbs.

EconomyPail PumpITEM 28-1755 $29.99• Brand new, GPI Model CP-5pail pump. Plunger pump foruse with hydraulic fluid, trans-mission fluid, and motor oil. Notfor use with chemicals. PVCbody, valve and seals made ofHypalon and glass. Slips intofive gallon pail, no special toolsto install.SPECIFICATIONS • Inlet ½˝ x 13/16˝ hosebarb• Compatible fluids: with ¾˝ NPTHydraulic fluid • Flow rate 8 oz. per strokeTransmission fluid • Nozzle typeMotor oil fluid weight 17½˝ clear tubingup to 90 wt. at 60° F • Shpg. 2 lbs.

Rotary FuelPumpITEM 28-1754$153.95• Brand new, GPIModel RP-10-ULrotary manual fuelpump. Use totransfer diesel(Bio diesel blends B20), gasoline (alcoholblends E15), hydraulic fluid, kerosene andmotor oil up to 30 wt. Not for use withchemicals. Equipped with an anti-siphonvent to prevent possible tank siphoningand the handle can be padlocked for fur-ther security. Aluminum housing with stain-less steel shaft. UL listed gasoline hosewith S.S. static wire. Aluminum alloy un-leaded nozzle included.SPECIFICATIONS• Flow rate 10 GPM at 100 rev. • Hose fitting ¾˝ NPT• Rotation CW • Suction pipe lgth.• Mount 2˝ tank bung adjustable up to 40˝ long• Hose size ¾˝ dia. x 8 ft. • Shpg. 17 lbs.

¾˝ NPT 8 ft.Fuel HoseITEM 28-1773$19.95• New, IRPCO Fuel-Flo farm hose. Nostatic wire.SPECIFICATIONS• Pressure 75 PSI max. • Fittings ¾˝ NPT• Length 8 ft. • Shpg. 3 lbs.

RotaryFuel

PumpITEM 28-1753$49.95

• Brand new, GPI ModelRP-5 rotary manual fuelpump. Use to transferdiesel, hydrau lic fluid,kero sene and motor oil up

to 10 wt. Not for use with chemicals. Castiron housing. Three piece metal suctionpipe with strainer.SPECIFICATIONS• Flow rate 8 GPM at 90 rev. • Hose fitting ¾˝ NPT• Rotation CW • Suction pipe lgth.• Mount 2˝ tank bung adjustable up to 39˝ long• Nozzle type ⅞˝ dia. spout • Shpg. 12 lbs.

Fuel Nozzles

$19.95 each• New, FRANKLIN manual utility fuel noz-zles. Buna-N seals. Aluminum alloy withzinc plated steel lever.SPECIFICATIONS• Pressure 50 PSI max. • Size 12˝ x 7˝ x 2˝• Tube lgth. 5¾˝ • Shpg. 3 lbs.

13/16˝ Discharge for Unleaded GasolineITEM Model Inlet

28-1775-75 402-310-01 ¾˝ NPT28-1775-100 402-310-02 1˝ NPT15/16˝ Discharge for Leaded Gasoline/DieselITEM Model Inlet

28-1772-75 402-300-01 ¾˝ NPT28-1772-100 402-300-02 1˝ NPT

Fuel/OilTransfer

HandPumps

28-1672

28-1673• Dual-action, pumps fluid on both push andpull strokes for fast transfer. Designed foruse with gasoline (up to 15% alcoholblends such as E15), diesel fuel (up to 20%biodiesel blends such as B20), keroseneand oil weights stated below. Includes cor-rosion resistant cast aluminum housing, 2˝NPT male tank mount, anti-siphon valve,self-priming pump.

ITEM 28-1672 $123.95• Model HP-90. Includes trim-to-fit suction pipe.SPECIFICATIONS • Pumps 10 wt. oil max.• Flow 25 GPM/100 strokes • Inlet mount 2˝ NPT• Nozzle type open end • Inlet 1˝ NPT• Nozzle size ¾˝ diam. • Outlet ¾˝ NPT• Discharge hose ¾ ̋dia. x 8 ft. • Housing size 6¼ ̋x 6⅝ ̋x 8˝• Dry prime up to 3 ft. • Shpg. 14 lbs.

ITEM 28-1673 $155.95• Model HP-100-UL. Dual-Flo design giveschoice of ½ gallon setting providing fasterhigh-capacity flow or ¼ gallon setting foreasier pumping of fluids. Includes ad-justable 22 to 44 inch suction pipe.SPECIFICATIONS • Pumps 30 wt. oil max.• Flow • Dry prime up to 5 ft.High 50 GPM/100 strokes • Inlet mount 2˝ NPTLow 25 GPM/100 strokes • Inlet 1˝ NPT• Nozzle type open end • Outlet ¾˝ NPT• Nozzle size ¾˝ diam. • Housing size 6¾ ̋x 9¾ ̋x 10˝• Discharge hose ¾ ̋dia. x 8 ft. • Shpg. 16 lbs.

Tuthill ManualTransfer PumpITEM 2-1350$29.99• New, TUTHILL Series 20hand lever piston pump forpumping fluid into a con-tainer. Poly propylene hous-ing, BUNA N seals.Economical manual trans ferpump ideal for use on barrels,drums and storage tanks. Anti-drip nozzle, check valve and 360°locking ring. Telescoping suctionpipe fits up to 36˝ high container. Compat-ible with water, gear oils, engine oils, paraf-fin, fertilizers, mild acids, an ti- freeze,hydraulic oils, diesel, de greasers, herbi-cides and pesticides. Not for use withgasoline, ethanol or methanol.SPECIFICATIONS• Flow 11 fl. oz. per stroke • Inlet 1˝ NPT• Viscosity SAE 90 max. • Outlet nozzle w/strainer• Bung adapter • Size 9¼˝ x 3½˝ x 12˝2˝ NPS • Shpg. 5 lbs.

10 Seats www.surpluscenter.com8

DeluxeHigh BackSeatw/Suspension &Armrest

ITEM 1-3548$364.99• Brand new, SEAT SOLUTIONS Model33001BK steel pan with vinyl backed fabriccushion. Swivel base for easy entry and exitof operator position. Adjustable back restand arm rests. Back rest folds flat. Suspen-sion with weight adjustment and 3 positionheight adjustment. Seat slides. Ideal re-placement for loaders, backhoes, construc-tion equipment, street maintenance, utilitytractors, combines, cotton pickers,sprayers, forage harvester, hay cuber andother specialty industrial tractors.SPECIFICATIONS• Bolt pattern (width x depth)10¼˝ x 10½˝ 10¼˝ x 11˝10¼˝ x 11½˝ 10¼˝ x 12¾˝• Size 25˝ x 24˝ x 34˝ • Shpg. 96 lbs.


High Back SeatWith IntegratedSuspension

ITEM 1-3207$319.95• Brand new, SEAT SOLUTIONS Model36000BK steel frame and black vinyl coverreplacement universal high back seat. Inte-grated suspension for low profile. Texturedseat cushion for air flow. Lever controls seatto slide forward and backwards. Arm rest.Intended for utility trucks, fork lifts, skidsteers and other construction equipment.SPECIFICATIONS• Mounting bolt pattern (width x depth)width 11¼˝slotted slides allow for depth spacing of 1˝ to 11¼˝maximum depth 11¼˝• Size 23˝ x 23¼˝ x 24˝ • Shpg. 68 lbs.

Universal2 PieceImplementSeat

ITEM 1-3205$89.99• Brand new, SEAT SOLUTIONS Model34000BK steel frame and black vinyl coverreplacement universal high back seat.Ribbed seat cushion for air flow. Lever con-trols seat to slide forward and backwards.Intended for utility trucks, fork lifts, skidsteers and other construction equipment.SPECIFICATIONS• Mounting bolt pattern (width x depth)45/16˝ diam. bolt holes • Size 19¾˝ x 18⅜˝ x 18¾˝adj. width 5½˝ to 15⅛˝ • Actual weight 26 lbs.depth 11˝ • Shpg. 44 lbs. (oversize)

HighBackSeat

ITEM 1-3208$229.99• Brand new, SEAT SOLUTIONS Model44000BK steel frame and black water resist-ant Cordura® fabric cover replacement uni-versal high back seat. Three position lumbarsupport. Adjustable armrests and upperbackrest. Backrest folds forward and reclinesbackwards. Document pouch. Lever controlsseat to slide forward and backwards. In-tended for utility trucks, fork lifts, skid steersand other construction equipment.SPECIFICATIONS• Mounting bolt pattern (width x depth)adjustable width 7˝ to 13½˝slotted slides allow for depth spacing of 1˝ to 13˝maximum depth 13˝• Size 20˝ x 24˝ x 26˝• Actual weight 44 lbs. • Shpg. 53 lbs. (oversize)

Universal 2 PieceTractorSeatWith AdjustableSuspension

• Brand new, SEAT SOLUTIONS steel frameand vinyl cover replacement universal highback seat. Adjustable weight suspension with3½˝ stroke. Ribbed seat cushion for air flow.Adjustable base angle. Lever controls seat toslide forward and backwards. Intended forutility, specialty, industrial tractors, equipment.SPECIFICATIONS• Mounting bolt pattern (width x depth)depth universal bolt pattern mounting plate• Size 20¾˝ x 23⅝˝ x 20½˝ • Shpg. 44 lbs.

ITEM 1-3213-BK $99.99• Model 51000BK03UN. Black vinyl.

ITEM 1-3213-BL $99.99• Model 51000BL03UN. Blue vinyl.

ITEM 1-3213-YE $99.99• Model 51000YE03UN. Yellow vinyl.

Universal Fold-DownImplementSeat

ITEM 1-3206$99.99• Brand new, SEAT SOLUTIONS Model35500BK steel frame and black vinyl coverreplacement universal high back seat.Fold-down back cushion. Textured seatcushion for air flow. Lever controls seat toslide forward and backwards. Arm rest. In-tended for utility trucks, fork lifts, skidsteers and other construction equipment.SPECIFICATIONS• Mounting bolt pattern (width x depth)adjustable width 5½˝ to 15⅛˝slotted slides allow for depth spacing of 1˝ to 11¼˝maximum depth 11¼˝• Size 21¼˝ x 23˝ x 18½˝• Actual weight 36 lbs. • Shpg. 40 lbs. (oversize)

Universal2 PieceImplementSeatITEM 1-3212$69.99• Brand new, SEAT SOLUTIONS Model50800BK steel frame and black vinyl coverreplacement universal high back seat.Ribbed seat cushion for air flow. Lever con-trols seat to slide forward and backwards.Intended for utility trucks, fork lifts, skidsteers and other construction equipment.SPECIFICATIONS• Mounting bolt pattern (width x depth)adjustable width 7½˝ to 13˝depth 11½˝• Size 19¾˝ x 19½˝ x 16½˝• Actual weight 28 lbs. • Shpg. 36 lbs. (oversize)

UniversalUtilitySeatWith Suspension

ITEM 1-3545$183.95• Brand new, SEAT SOLUTIONS Model51200BK steel framed vinyl covered cush-ion utility seat. ideal replacement for utilitytractors, industrial tractors and other spe-cialty mobile equipment. Sliding base. Ad-justable weight suspension.SPECIFICATIONS • Size 19¾˝ x 195/16˝ x 23¼˝• Universal bolt pattern • Shpg. 43 lbs.

Gray SeatWithArmrests

ITEM 1-3562$159.99• New, leather grain gray vinyl seat withadjustable flip up cushioned armrests.“eXmark” logo molded into back cushion.Steel frame with lever adjustment for slid-ing base. Drain hole in bottom.SPECIFICATIONS• Base cushion 18˝ x 15˝ • Mtg. pattern 11˝ x 11¼˝• Backrest height 16½˝ • Size 17¼˝ x 21˝ x 20¾˝• Width between armrests 17˝ • Actual weight 26 lbs.• Travel range 4½˝ • Shpg. 50 lbs. (oversize)

You can find more seats atwww.surpluscenter.com

800-488-3407 Seats 11&

Universal2 PieceImplementSeatITEM 1-3544$73.95• Brand new, SEAT SOLUTIONS Model50800BK steel frame and yellow vinylcover, replacement universal high backseat. Ribbed seat cushion for air flow.Lever controls seat to slide forward andbackwards. Intended for utility trucks, forklifts, skid steers and other constructionequipment.SPECIFICATIONS• Bolt pattern

Adjustable width 7½˝ to 13˝; Depth 11½˝• Size 19¾˝ x 19½˝ x 16½˝• Actual weight 28 lbs. • Shpg. 36 lbs. (oversize)

ReplacementKubotaSeat

ITEM 1-3528$89.99• Brand new, SEAT SOLUTIONS Model53000BK03UN replacement KUBOTAseat. Steel frame heavy duty black vinylcovering on high density foam. Two drainholes in the base of the seat.• Replacement seat for many models ofKubota, Kumiai, Mahindra, Massey Fergu-son, Mitsubishi, Rhino, Satoh, White, Yan-mar.• Specific model numbers can be found atwww.surpluscenter.com.SPECIFICATIONS• Bolt patterns:

6˝ x 2˝, 6˝ x 4˝, 7˝ x 1⅝˝, • Size 21½˝ x 17˝ x 18˝7½˝ x 2˝, 7½˝ x 4˝, • Actual weight 14 lbs.7½˝ x 6˝, 7½˝ x 7˝ • Shpg. 35 lbs. (oversize)

CompactTractorSeatw/Flip Forward Bracket

ITEM 1-3542$64.99

• Brand new, SEAT SOLUTIONS Model52010BK compact tractor seat with flipforward bracket. Integral polyurethanesteel frame. Waterproof with drain holes.• Replacement seat for many models ofBolens, Cub Cadet, Ford/New Holland, Hi-nomoto, International Harvester, Iseki,John Deere Utility Orchard Tractors, Kub-ota, Kumiai, Mahindra, Massey Ferguson,Mitsubishi, Rhino, Satoh, White & Yanmar.• Specific model numbers can be found atwww.surpluscenter.com.SPECIFICATIONS• Bolt pattern without flip bracket (width x depth)

6½˝ x 1.63˝ 7½˝ x 1.63˝ 7½˝ x 7˝• Size 17½˝ x 15˝ x 14½˝• Actual weight 12 lbs. • Shpg. 32 lbs. (oversize)

ContouredHigh BackSeatw/ Slides

ITEM 1-3541$102.95• Brand new, SEAT SOLUTIONS Model45000BK high-back contoured seat.Heavy duty vinyl cover. Ideal replacementfor commercial turf, utility vehicles, fork-lifts, skid steers, loaders, backhoes andother construction equipment. Springloaded lever to lock seat slide. Acceptsoperator presence switch.SPECIFICATIONS• Bolt pattern without slides (width x depth)

7½˝ x 7˝ 7½˝ x 11½˝ 8˝ x 11½˝8.2˝ x 5˝ 9½˝ x 11½˝ 11¼˝ x 11½˝

• Bolt pattern with slides (width x depth)8˝ x 11⅛˝ 9½˝ x 11⅛˝ 11¼˝ x 11⅛˝

• Size 21˝ x 18˝ x 19˝• Actual weight 21 lbs. • Shpg. 50 lbs. (oversize)

Low BackUtilitySeatITEM 1-3549$39.99• Brand new, SEAT SOLUTIONS Model15000BK low-back steel pan seat. Heavy dutyPVC cover. Water resistant. Ideal replacementfor lawn mowers, garden tractors and utilityvehicles. Accepts operator presence switch.SPECIFICATIONS• Bolt patterns (width x depth)

6˝ x 5˝ 7½˝ x 7˝ 8.2˝ x 5˝• Size 16½˝ x 18¼˝ x 11˝ • Shpg. 10 lbs.

Low BackUtilitySeat

ITEM 1-3555$39.99• Brand new, SEAT SOLUTIONS Model15000YE low-back yellow steel pan seat.Heavy duty PVC cover. Water resistant.Ideal replacement for lawn mowers, gar-den tractors and utility vehicles. Acceptsoperator presence switch.SPECIFICATIONS• Bolt patterns (width x depth)

6˝ x 5˝ 7½˝ x 7˝ 8.2˝ x 5˝• Size 16½˝ x 18¼˝ x 11˝ • Shpg. 10 lbs.

High BackUtilitySeat

ITEM 1-3546$50.95• Brand new, SEAT SOLUTIONS Model15500BK high back steel pan seat. Heavyduty PVC cover. Water resistant. Ideal re-placement for lawn mowers, garden trac-tors and utility vehicles. Accepts operatorpresence switch.SPECIFICATIONS• Bolt patterns (width x depth)

6˝ x 5˝ 7½˝ x 7˝ 8.2˝ x 5˝• Size 18˝ x 19¼˝ x 13¾˝• Actual weight 11 lbs. • Shpg. 35 lbs. (oversize)

DeluxeUltra-HighBack Seat

ITEM 1-3547$81.95• Brand new, SEAT SOLUTIONS Model12000BK ultra-high back seat. Integralpolyurethane/steel frame construction. Wa-terproof. Drain hole. Ideal replacement forgarden tractors, commercial mowers, utilityvehicles, forklifts, skid steers, loaders, back-hoes and other construction equipment.SPECIFICATIONS• Bolt pattern (width x depth)

8˝ x 11½˝ 10½˝ x 7¾˝ 11¼˝ x 11½˝• Size 20⅛˝ x 17½˝ x 19⅛˝• Actual weight 14 lbs. • Shpg. 47 lbs. (oversize)

Ordering Information& Shipping Rates

on pages 146 - 147

High BackImplementSeat

ITEM 1-3726$49.99• New, MILSCO gray padded vinyl seatwith plastic frame. “BUSHHOG” moldedinto backrest. Waterproof with drain hole.Presence switch in base.SPECIFICATIONS• Mounting pattern • Size 22˝ x 20˝ x 20˝

11¼˝ x 11½˝ • Actual weight 12 lbs.• Thread size 5/16-18 • Shpg. 53 lbs. (oversize)


ITEM 1-3727$59.99• New, MICHIGAN SEAT CO. gray paddedvinyl seat with steel frame. “BUSHHOG”molded into backrest. Waterproof withdrain hole. Presence switch in base. In-cludes slider mechanism for forward/backadjustment.SPECIFICATIONS• Mounting pattern • Size 17½˝ x 22˝ x 20˝

115/16˝ x 11˝ • Actual weight 19 lbs.• Stud size 5/16-18 • Shpg. 64 lbs. (oversize)

Low BackImplementSeat

ITEM 1-3200$49.99• Brand new, SEAT SOLUTIONS Model11000BK steel frame and black poly ure -thane covered replacement universal lowback seat. Intended for lawn mowers, gar-den tractors and other implement equip-ment. Water proof. Safety switch cavity.SPECIFICATIONS• Mounting bolt pattern (width x depth)5¼˝ x 4½˝; 6˝ x 5˝; 7½˝ x 7˝• Size 163/16˝ x 18½˝ x 9⅞˝ • Shpg. 12 lbs.


ITEM 1-3201$59.99• Brand new, SEAT SOLUTIONS Model11500BK steel frame and black polyure -thane covered replacement universal highback seat. Intended for lawn mowers, gar-den tractors and other implement equip-ment. Water proof. Safety switch cavity.SPECIFICATIONS• Mounting bolt pattern (width x depth)5¼˝ x 4½˝; 6˝ x 5˝; 7½˝ x 7˝• Size 1815/16˝ x 1815/16˝ x 14½˝• Actual weight 12 lbs. • Shpg. 32 lbs. (oversize)

High BackImplementSeats

• Brand new, SEAT SOLUTIONS steelframe and poly urethane covered replace-ment universal high back seat. Intendedfor lawn mowers, garden tractors andother implement equipment. Waterproofwith drain hole. Safety switch cavity.SPECIFICATIONS• Mounting bolt pattern (width x depth)6˝ x 5˝ 7½˝ x 3˝7½˝ x 7˝ 8¼˝ x 5˝8½˝ x 1⅝˝ 11¼˝ x 11˝• Size 20˝ x 19¾˝ x 14˝• Actual weight 17 lbs. • Shpg. 33 lbs. (oversize)

ITEM 1-3202-BK $69.99• Model 13501BK. Black polyurethane.

ITEM 1-3202-YE $69.99• Model 13501YE. Yellow polyurethane.

12 Seats www.surpluscenter.com8


ITEM 1-3204$74.95• Brand new, SEAT SOLUTIONS Model32000BK steel frame and black vinyl coverreplacement universal high back seat. In-tended for utility trucks, fork lifts, skidsteers and other construction equipment.SPECIFICATIONS • Size 2015/16 ̋x 18½ ̋x 1815/16˝• Mounting bolt pattern: • Actual weight 18 lbs.universal slot pattern • Shpg. 46 lbs. (oversize)

BlackMowerSeat

ITEM 1-3289$29.95• New, black vinyl seat with “Troy-Bilt”molded into back rest. Plastic base with 4threaded brass inserts for mounting.SPECIFICATIONS • Mtg. pattern 5⅞˝ x 4⅞˝• Backrest height 9˝ • Size 18½˝ x 17½˝ x 11½˝• Cushion depth 13˝ • Shpg. 7 lbs.

UniversalPan Seat

ITEM 1-3199$29.99• Brand new, SEAT SOLUTIONS Model10000BK covered black replacement uni-versal pan seat for lawn mowers and gar-den tractors. Three drain holes. Steel frame.SPECIFICATIONS• Mounting two ½˝-13 bolts• Size 16¾˝ x 19˝ x 7˝on 2˝ centers • Shpg. 8 lbs.


• Brand new, SEAT SOLUTIONS plasticframe and vinyl cover replacement univer-sal high back seat. Intended for lawn mow-ers, garden tractors and other implementequipment. Water proof with drain hole.SPECIFICATIONS• Mounting bolt pattern (width x depth)7½˝ x 3˝ 7½˝ x 7˝8˝ x 11˝ 8¼˝ x 5˝10⅝˝ x 7½˝ 11¼˝ x 11½˝• Size 207/16˝ x 1731/32˝ x 1815/16˝• Actual weight 16 lbs. • Shpg. 42 lbs. (oversize)

ITEM 1-3203-BK $121.95• Model 14010BK. Black vinyl.

ITEM 1-3203-YE $121.95• Model 14010YE. Yellow vinyl.

YellowMowerSeatITEM 1-3522$36.95• New, MTD riding mower seat. Yellowcolor. Molded vinyl cushion.SPECIFICATIONS • Mounting holes 5˝ x 6˝• Backrest height 9˝ • Size 20¼˝ x 18⅜˝ x 10½˝• Cushion depth 13˝ • Shpg. 12 lbs.

Pan SeatCushions

1-3209 1-3210 1-3211

• Brand new, SEAT SOLUTIONS seat cushions will fit most pan style seats. Two piececushion. Tie string attachment. Intended for use with our ITEM 1-3199 (at left).ITEM Model Color Cushion Fill Shpg. Price

1-3209 50100GR Grey vinyl Poly-foam 2 lbs. $15.951-3210 50200GR Grey vinyl Shredded foam 3 lbs. $16.991-3211 50300RW Red and white vinyl Poly-foam 3 lbs. $17.95

Black LawnMower SeatITEM 1-2682$39.95• New. Cushioned black vinyl seat withsheet metal frame. Four bolt mount (twoholes 7⅜˝ B.C. and two 9⅛˝ c/c 3¼˝ be-tween rows). Seating surface measures17½˝ wide x 10½˝ deep. 8˝ backrest height(measured from seat surface to top of back-rest). Size 18½˝ x 16˝ x 9¾˝. Shpg. 11 lbs.

BlackMowerSeat

ITEM 1-3708$39.95• New, riding mower seat. Black moldedvinyl cushion. Steel base with nuts formounting. Weltless trim ring for long wear-ing.SPECIFICATIONS • Mounting holes 7½˝ x 8˝• Backrest height 10˝ • Size 18˝ x 17˝ x 11˝• Cushion depth 13˝ • Shpg. 11 lbs.

YellowMower SeatITEM 1-3709$39.95• New, riding mower seat. Yellow color.Molded vinyl cushion. Plastic base withbrass inserts for bolts.SPECIFICATIONS • Mounting holes 5˝ x 6˝• Backrest height 7˝ • Size 17˝ x 15½˝ x 9˝• Cushion depth 11½˝ • Shpg. 7 lbs.

Two Point RetractableSeat Belts

• New, IMMI two-point seat belt. Designedfor off-road use only. Comfort ride sleeveon latch end allows for a controlledamount of movement and comfort. Auto-matic locking retractor adjusts instantly tooperator’s size. Conforms to safety speci-fications SAE J386 and FMVSS 302.

ITEM 1-3439 $17.99SPECIFICATIONS• Mounting centers • Mounting holesmin. 10⅜˝, max. 52½˝ Latch end 7/16˝• Belt 1⅞˝ wide Buckle end 7/16˝• Color black • Shpg. 2 lbs.

ITEM 1-3267 $24.99SPECIFICATIONS • Mounting holes• Mounting centers Latch end 7/16˝ diam.min. 16˝, max. 59˝ Retractor end ½˝ diam.• Belt 1⅞˝ wide • Shpg. 4 lbs.

John DeereSeatBracketSetITEM 1-2636$2.99• New, 3 piece steel bracket set for JohnDeere seats. Two side brackets for base tomid-section and back bracket from mid-section to upper rest. Bright yellow. In-cludes 12 attachment bolts. Does notinclude cushions. Find a complete list online ofequipment model numbers that this bracket fits atwww.surpluscenter.com. Shpg. 4 lbs.

Universal SeatSlot Bar Set

ITEM 1-3553$20.95• Brand new, SEAT SOLUTIONS Model94500BK seat slot bar pair. Sturdy steelconstruction. Converts many seat bolt pat-terns to widths of 5˝ to 13½˝.SPECIFICATIONS • Size 15˝ x 215/16˝• Bolt hole ⅜˝ diam. • Shpg. 7 lbs.

800-488-3407 Seats & Accessories 13&

Base CushionFor John Deere

ITEM 1-3218$84.95

• Brand new, SEAT SOLUTIONS Model55800BR replacement base cushion for JohnDeere mobile equipment. Steel frame withheavy brown fabric cover on high densityfoam. For use with mechanical suspension.SPECIFICATIONSFind a complete list online of equipment model numbersthat this cushion fits at www.surpluscenter.com.• Size 23˝ x 18˝ x 6˝ • Shpg. 14 lbs.

ITEM 1-3219 $84.95• Same as ITEM 1-3218 above except Model55850BR. Use with hydraulic suspension.SPECIFICATIONSFind a complete list online of equipment model numbersthat this cushion fits.• Size 23˝ x 18˝ x 6˝ • Shpg. 14 lbs.

Back CushionFor John Deere

ITEM 1-3217$91.95• Brand new, SEAT SOLUTIONS Model55700BR replacement back cushion for JohnDeere mobile equipment. Steel frame withheavy brown fabric cover on high densityfoam. For use with mechanical or hydraulicsuspension. Adjustable lumbar support.SPECIFICATIONSFind a complete list online of equipment model numbersthat this cushion fits at www.surpluscenter.com.• Size 17˝ x 17˝ x 7˝ • Shpg. 13 lbs.

Two Point AdjustableSeat Belt

ITEM 1-3438 $11.99• New, IMMI two-point general purpose,manually adjustable seat belt. Designed foroff-road use only. Belt conforms to safetyspecifications FMVSS209 and FMV SS 302.SPECIFICATIONS• Mounting centers • Mounting holesmin. 19¼˝, max. 82½˝ Latch end 7/16˝• Belt 1⅞˝ wide Buckle end 7/16˝• Color black • Shpg. 1½ lbs.

3 Piece ReplacementCushion SetFor John Deere

ITEM 1-3214$109.99• Brand new, SEAT SOLUTIONS Model55000YE replacement cushion set forJohn Deere mobile equipment. Steel framewith heavy yellow vinyl cover on high den-sity foam. Does not include hardware.SPECIFICATIONSFind a complete list online of equipment model numbersthat this cushion fits at www.surpluscenter.com.• Size 25½˝ x 19˝ x 15¼˝ • Shpg. 21 lbs.

2 Piece ReplacementSeatFor John Deere

ITEM 1-3215$109.99

• Brand new, SEAT SOLUTIONS Model55500YE replacement cushion set for JohnDeere mobile equipment. Steel frame withheavy yellow vinyl cover on high density foam.SPECIFICATIONSFind a complete list online of equipment model numbersthat this cushion fits at www.surpluscenter.com.• Size 23½˝ x 14˝ x 16˝ • Shpg. 16 lbs.

4 Piece ReplacementCushion SetFor John Deere

ITEM 1-3216$169.99

• Brand new, SEAT SOLUTIONS Model55600YE replacement cushion set for JohnDeere mobile equipment. Steel frame withheavy yellow vinyl cover on high density foam.SPECIFICATIONSFind a complete list online of equipment model numbersthat this cushion fits at www.surpluscenter.com.• Size 21˝ x 24˝ x 21˝ • Shpg. 33 lbs.

3 Piece ReplacementCushion SetFor InternationalHarvester

ITEM 1-3220$119.99• Brand new, SEAT SOLUTIONS Model556000BW re place ment cushion set for In-ternational Har vester mobile equipment.Steel frame with heavy yellow vinyl coveron high density foam.SPECIFICATIONSFind a complete list online of equipment model numbersthat this cushion fits at www.surpluscenter.com.• Size 27˝ x 21˝ x 7˝ • Shpg. 24 lbs.

Seat Slide Pair

ITEM 1-3550$28.95• Brand new, SEAT SOLUTIONS Model90000BK pair adjustable seat slides. Pow-der coat painted, Sturdy steel construc-tion. Easily adapted to many seats.SPECIFICATIONS• Positions 8 • Travel 5⅝˝• Bolt pattern universal 11⅝˝ max. depth c/c• Bolt hole 5/16˝ diam. • Shpg. 5 lbs.

5˝ Travel SeatAdjusterITEM 1-3517$8.99• New, sliding seat ad-juster for vehicle, tractor ormower seats. Plated steel. Spring loadedadjustment lever on left side.SPECIFICATIONS• Travel 5˝• Preset stops 11• Seat mtg. two 5/16˝-18 x ½˝ studs 8˝ c/c• Floor mtg. two 5/16˝-18 x 1˝ studs 8˝ c/c• Shpg. 4 lbs.

12 VDC AmberRotatingLight

ITEM 12-979$18.95• Brand new, BUYERS Model RL650Amagnetic mount revolving emergencylight. Durable plastic Amber lens. Includesreplacement bulb. Stick on cover to helpprevent magnet from scratching mountingsurface paint.SPECIFICATIONS • Mount magnetic base• Voltage 12 VDC • Cord lgth. 10 ft.• Connection • Size 7⅝˝ x 5˝ x 5⅝˝automotive cigarette lighter • Shpg. 2 lbs.

12 VDC LEDUtilityLights

$34.95 each• Brand new, BUYERSModel 1492100 utility light.Weather proof hard rubber hous-ing. 54 LEDs. Very low amp draw. Sealedlamp. Universal adjustable mounting bracket.SPECIFICATIONS• Voltage 12 VDC • Mount 5/16˝ x 9/16˝ stud• Connection 2 wire • Size 5˝ x 33/16˝ x 7˝• Lens 4˝ diameter • Shpg. 2 lbs.

ITEM 12-975 Clear lensITEM 12-975-A Amber lens

12-24 VDC,1350 lumensLED UtilityLights

$50.95 each• Brand new, BUYERS Model 1492115 LEDutility light. Six, high-powered LEDs. Castaluminum housing with black powder coatfinish. Shock, vibration resistant as well aswaterproof. Clear acrylic lens. 120° viewingangle. Stainless steel mounting bracket andfasteners. Two wire connection.SPECIFICATIONS• Voltage 12-24 VDC • Lens 4¼˝ diameter• Power 18 Watts • Mount M8-1.25 x 0.55˝• Amps 1.06 at 14.3 VDC • Size 4.56˝ x 1.69˝ x 5.31˝• lumens 1350 • Shpg. 2 lbs.

ITEM 12-980 Clear lensITEM 12-980-A Amber lens

14 Mobile Equipment Accessories www.surpluscenter.com8

Back-Up Alarms• Brand new, BUYERS back-up alarms.Plastic housing, epoxy sealed from mois-ture, dust and vibration. Self grounding.Back up alarm should be louder thanbackground noise of all jobsites vehicle isused at. Meets OSHA, Bureau of Mines,GSA and all state regulations. Conforms toJ994 criteria.

ITEM 12-978$21.95SPECIFICATIONS • Mount 4 slots for ¼˝ bolts• Decibels 107 dB • Size 43/16˝ x 3⅜˝ x 2˝• Voltage 12-24 VDC • Shpg. ¾ lb.

ITEM 12-976$19.95SPECIFICATIONS • Mount 4 slots for ¼˝ bolts• Decibels 97 dB • Size 4¼˝ x 2¾˝ x 2˝• Voltage 12-24 VDC • Shpg. ¾ lb.

ITEM 12-977$20.95SPECIFICATIONS • Mount 4 slots for ¼˝ bolts• Decibels 102 dB • Size 45/16˝ x 2⅞˝ x 2˝• Voltage 12-24 VDC • Shpg. ¾ lb.

4 Qt. PlasticFuel TankITEM 28-1452$9.95• New. Black plastic fuel tank with cap. In-ternal baffles. Hose barb outlet in bottomof tank to connect to ¼˝ I.D. tubing.SPECIFICATIONS • Mount four bolt side• Capacity 4 quarts 7⅛˝ x 7˝ centers• Size 11¾˝ x 7¾˝ x 5˝ • Shpg. 3 lbs.

4 GallonFuelTank

ITEM 28-1648-A $19.95• New, poly gas tank. Designed for strapmounting on a small utility vehicle. Topmounted fuel pickup. Single fill port in sideof tank with vented thread-on cap.SPECIFICATIONS • Size 19˝ x 14˝ x 11˝• Capacity 4 gallons • Shpg. 9 lbs.• Fuel pickup ¼˝ hose barb • Ships over-size• Filler port 2˝ at 29 lbs. rate

HondaFuelTank

ITEM 28-1663-A $14.95• New. Painted steel tank. Base mountwith two threaded studs and two tappedholes. Includes filler cap and ¼˝ hosebarbbottom outlet. Large plated steel cap withchain retainer included.• Original equipment on HONDA ModelGX140, GX160 and GX200 engines.SPECIFICATIONS • Filler opening 1⅝˝• Capacity 3.3 quarts • Size 9½˝ x 8¼˝ x 5˝• Fuel port ¼˝ hose barb • Shpg. 5 lbs.

6 GallonFuelTankITEM 28-1730$39.99• New, black plastic fuel tank. Filler caphas “Diesel Fuel Only” imprint. Angled fillneck extends 4˝ from front. Kelch sensoropens when tank is full. All ports are hosebarbs and on top face.SPECIFICATIONS• Capacity 6 gallons • Size 25˝ x 7˝ x 12˝• Filler neck opening 1⅝˝ dia.• Actual weight 8 lbs.• Ports two ¼˝ ID, one 5/16˝ ID • Shpg. 26 lbs. (oversize)

12 VDC UtilityLight

ITEM 12-974$8.50• Brand new, BUYERS Model 1492100utility light. Weather proof hard rubberhousing. Incandescent bulb. Sealed lamp.Universal adjustable mounting bracket.SPECIFICATIONS• Voltage 12 VDC • Lens 4˝ diameter• Power 35 Watts • Mount 5/16˝ x 9/16˝ stud• Amps 2.92 amps • Size 5˝ x 2¾˝ x 6¼˝• Connection 2 wires • Shpg. 2 lbs.






12 VDC MagneticMount FlashingLight

ITEM 12-983 $18.95• New, PETERSON MFG Model 773 dualbulb flashing light. Alternates betweenupper and lower bulb to command atten-tion. Magnetic mount with 12 ft. coiledcord to cigarette lighter plug.SPECIFICATIONS • Bulb type #89• Voltage 12 DC • Mount 3 magnets• Lens color amber • Size 4⅝˝ dia. x 5½˝• Flash rate 90/minute • Shpg. 2 lbs.

Bolt-OnFolding Step

ITEM 1-3297$6.95

• Brand new. Painted cast steel foldingstep. Stainless steel spring.SPECIFICATIONS• Mount two 5/16˝ holes on • Thickness folded up 15/16˝3-7/8˝ centers • Size 4⅜˝ x 15/16˝ x 5⅜˝• Step size 2⅛˝ x 4⅜˝ • Shpg. 1½ lbs.

12 VoltHourmeter

ITEM 1-1238$19.95• Brand new. Shows running time of equip-ment. Non-resettable. Operates on 12-80VDC. Panel mount in 2˝ dia. hole. Shpg. ¼ lb.

12 VoltHourmeter

ITEM 1-2506$19.95• Brand new. Shows running time ofequipment. Non-resettable.SPECIFICATIONS • Surface mnt. w/3 screws• Operates on 12 VDC on 2½˝ bolt circleup to 80 VDC • 2⅞˝ OD on face• Requires 2˝ diam. opening • Shpg. ¼ lb.

5000 RPMTachometer

ITEM 28-1541-M$19.95• New, AMI Model 111735 diesel tachometer.Reads 0-5000 RPM. Use with electric send-ing unit and ratio cartridge (neither included)with drive ratio of 0.5:1, 1:1, or 2:1. Includesbracket for mounting and instructions.SPECIFICATIONS• Range 0-5000 RPM • 12 VDC illumination kit• Mount 37/16˝ diam. opening• Requires 3˝ clearance• 3¾˝ diam. chrome bezel • White markings/black face• 3˝ diam. face • Shpg. 2 lbs.

Water Temp.Gauge Kit

ITEM 28-1795$9.95• New, EQUUS water temperature gaugekit. Can be mounted in dash or under dashwith included bracket. 12 volt DC illumina-tion. Black bezel and face, red pointer,white/yellow scale.SPECIFICATIONS• Range • Adapters ⅜˝ NPT,13-280° F / 60-140° C ½˝ NPT, M18x1.5

• Face dia. 2˝ • Size 2¾˝ x 2½˝ x 3˝• Mtg. hole dia. 2.035˝ (w/bracket)• Capillary tube 5½ ft. • Shpg. 1 lb.

5˝ MechanicalTachometer

ITEM 28-1258$9.99• New, STEWART WARNER Track Force.Built to withstand abuse in racing applica-tions. 0-10,000 RPM. Standard 2:1 driveratio. Fits 5˝ diam. opening. Requires 2½˝clearance. Black face and bezel. Includes12 volt DC light kit. Shpg. 3 lbs.

800-488-3407 Meters & Gauges 15&

BoatSpeedometer

ITEM 28-1259$12.95• New, STEWART WARNER Model598BTJ4. Marine speedometer with 3¼˝black face reads 10-60 mph and 20-97km/h. Hosebarb for pilot tube connection.Mounts in 3⅜˝ hole. ⅝˝ diam. hole in backfor illumination bulb (not incl.). 1⅜˝ deepbehind panel. Shpg. 2 lbs.

Marine/Automotive Gauges• New, SS WHITE, DIAMOND DELUXE INSTRU-MENTS. All models are water-proof, have blackbackground with white markings, stainless steelbezel, scratch proof glass and 12 volt DC illumi-

nation kit. Shpg. 2 lbs.

ITEM Type Range Info Diam. Price

28-1404-A 0-80 PSI 21/16˝ $7.99

28-1404-B 0-100 PSI 21/16˝ $7.99

28-1405 0-30 PSI 21/16˝ $12.99

28-1402 10-55 mph 3⅜˝ $16.99

24 VDC TorqueConverterTemp. GaugeITEM 28-1448$4.95• New. Torque converter oil temperaturegauge. Use with 33-240 Ohm sender unit.Metal housing. A light bulb can be addedfor night time use (bulb not included).SPECIFICATIONS• For use in 24 VDC, • 1⅞˝ diam. gauge facenegative ground system • 25/16˝ diam. chrome bezel• Fits 23/16˝ diam. opening • Shpg. ¼ lb.

Marine Gauges

• New, FARIA. Built for marine use. All models have graybackground with white markings. 12 volt DC illumina-tion kit. Stainless steel bezel with plastic face. All requiresending unit. Shpg. 1 lb.

ITEM Type Range Info Diam Price 21-1439 Oil Pressure 0-80 PSI Requires electric sending unit 2˝ $13.99 21-1440 Speedometer 0-80 MPH Requires water pressure pickup 3¼˝ $18.99 21-1444 Trim U-D Requires electric sending unit 2˝ $12.99

Oil Pressure Requires 240-33 ohm 12 volt electric standard sender Oil Pressure Requires 240-33 ohm 12 volt electric standard sender Water Pressure Includes installation kit mechanical w/20 ft. pressure tubing Speedometer Pilot tube kit 20 ft mechanical included

12 VoltHourmeterITEM 1-2507$19.95• Brand new. Shows running time ofequipment. Compact size. Non-resettable.SPECIFICATIONS• Operates on 12 VDC • Requires 1˝ x 1½˝ diam.up to 80 VDC opening• Surface mount • 2⅜˝ total depthw/2 screws (1¾˝ c/c) • Shpg. ¼ lb.

100 PSI OilPressureGaugeITEM 28-1493$6.95• New, SUNPRO Model CP0861. Oil pres-sure gauge includes mounting bracket,plastic tubing, instructions and adapter set.SPECIFICATIONS• Reads 0-100 PSI in • White letters on5 PSI increments black background• Mnt. in 2⅝˝ dia. opening • Chrome bezel• 12 VDC internal lighting • Shpg. 1½ lbs.

3 BoltFace FlangeITEM 21-165949¢• New 3 bolt hole face flange for 2˝ gauges.2⅜˝ bolt circle. Shpg. ¼ lb.

Oil PressureGaugeKitITEM 28-1794$9.95• New, EQUUS mechanical oil pressuregauge kit. Can be mounted in dash orunder dash with included bracket. 12 voltDC illumination. Black bezel and face, redpointer, white/yellow scale.SPECIFICATIONS• Range • Adapters ⅛˝ NPT,0-100 PSI / 0-7 100KPa ¼˝ NPT, ⅛-28 BSP

• Face dia. 2˝ • Size 2¾˝ x 2½˝ x 3˝• Mtg. hole dia. 2.035˝ (w/bracket)• Capillary tube 6 ft. • Shpg. 1 lb.

16 Trailer Jacks www.surpluscenter.com8

12 VDC, 24˝ Travel,3500 lb. ElectricTongue JackITEM 28-1746$139.95• Brand new, BUYERSPRODUCTS Model 0093 -500 electric tongue jack.Ideal for use on travel trail-ers and boat trailers. Pow-der-coated steel tubing,hardened steel gears,weather-sealed switches.Travel length includes 18˝ ofelectric-powered travel plus6˝ of manual drop leg exten-sion length. Drop legadjust able in 1½˝ incre-ments. Built-in levelinggauge and two LEDnight-lights. Crank-han-dle included for manual over-ride. Mount-ing bracket kit sold separately.SPECIFICATIONS • Speed 30 sec. full stroke• Load ratings: • Wiring 48˝ cord3500 lbs. continuous w/ 7-pin RV plug5000 lbs. break-away • Foot pad 5¼˝ O.D• Travel 24˝ (see above) • Retracted height 26½˝• Voltage 12 DC • Shpg. 23 lbs.

Mounting Bracket KitITEM 28-1746-BRACKET$42.95• Brand new, BUYERS PRODUCTS#0093510. Mounting kit for use with ourITEM 28-1746 electric jack. Black powder-coated steel. Shpg. 10 lbs.

2000 lb. Trailer Jack

ITEM 28-1614$27.99• Brand new, NORTHFIELDA frame trailer jack. 12gauge round tubing. Pow-der coated outer tube andzinc plated inner tube forlong life.SPECIFICATIONS • 2¼˝ round tube body• 2000 lb. capacity • Triangular 3 hole• Topwind A frame mount• 15˝ travel • 5/16˝ pin for mnt. w/retainer• Length mount to base • 5˝ x 6˝ footRetracted 9¼˝ • Overall retracted lgth. 20˝Extended 24¼˝ • Shpg 10 lbs.

Trailer Jacks

2¼˝ Round Tube Body• Brand new, NORTHFIELD trailer jack. 2¼˝ round tube body. Black painted outer tube, zinc plated inner tube for long life. Swivel mountwith retaining pin allows jack to be swiveled 90° for clearance.

Type Lgth. Overallof of From the Tube Mount Retracted Mtg. Pin Foot

ITEM Capacity Wind Travel Retracted Extended Lgth. Style Size Size Shpg. Price28-1613-10 2000 Top 10˝ 11¾˝ 21¾˝ 15˝ 2˝ dia. tube ⅜˝ 4x8 13 lbs. $28.9528-1613-15 2000 Top 15˝ 15¼˝ 30¼˝ 18½˝ 2˝ dia. tube ⅜˝ 4x8 13 lbs. $31.95

2¼˝ Square Tube Body• Brand new, NORTHFIELD trailer jack. 2¼˝ square tube body. Heavy duty, 12 gauge square tubing for extra strength. Pow der coatedouter tube, zinc plated inner tube for long life. Weld-on tubular mount allows jack to be swiveled 90° for clearance. 3 year mfg. warranty.

Type Lgth. Overallof of From the Tube Mount Retracted Mtg. Pin Foot

ITEM Capacity Wind Travel Retracted Extended Lgth. Style Size Size Shpg. Price28-1608-10 2000 Top 10˝ 11˝ 21˝ 15˝ 2˝ dia. tube 9/16˝ 4x8 15 lbs. $33.9528-1608-15 2000 Top 15˝ 14½˝ 29½˝ 24¾˝ 2˝ dia. tube 9/16˝ 4x8 19 lbs. $40.9528-1609-10 2000 Side 10˝ 10¾˝ 20¾˝ 17¼˝ 2˝ dia. tube 9/16˝ 4x8 16 lbs. $34.9528-1609-15 2000 Side 15˝ 14⅝˝ 29¾˝ 26⅞˝ 2˝ dia. tube 9/16˝ 4x8 20 lbs. $38.9528-1610-10 5000 Top 10˝ 11¼˝ 21½˝ 15¼˝ 2˝ dia. tube 9/16˝ 4x8 16 lbs. $34.9528-1610-15 5000 Top 15˝ 14⅝˝ 30⅛˝ 24¼˝ 2˝ dia. tube 9/16˝ 4x8 21 lbs. $39.9528-1611-10 5000 Side 10˝ 10½˝ 20½˝ 19½˝ 2˝ dia. tube ⅝˝ 4x8 18 lbs. $39.9528-1611-15 5000 Side 15˝ 15½˝ 30½˝ 21¾˝ 2˝ dia. tube ⅝˝ 4x8 21 lbs. $44.95

8000 lb.Trailer Jack

ITEM 28-1612 $55.95• Brand new, NORTHFIELD heavyduty trailer jack. For large high ca-pacity trailers. 12 gauge squaretubing for extra strength. Powdercoated outer tube and zinc platedinner tube for long life. Direct weldmount. Drop leg allows 13½˝ extralength. 3 year mfg. warranty.SPECIFICATIONS• 8000 lb. capacity • 9/16˝ pin for mount• Top-wind w/retainer chain• 15˝ travel • 6˝ x 8˝ foot• 2½˝ square tube body • Shpg. 25 lbs.• Length center of tube mount to base:Retracted 21½˝, Extended 50˝

SideMountFloorLockITEM 1-3028$18.95• New, spring loaded side mount floor lock.Plated steel construction. Superficial rust.SPECIFICATIONS • Mount four ¾˝ long slots• Retracted height 16˝ for ⅜˝ dia. bolts• Extended height 18-1/8˝ on 3¾˝ x 3˝ centers• Foot 3½ ̋dia. rubber padded • Size 16˝ x 7¼˝ x 3½˝• Two ⅜ ̋dia. bolt holes 3 ̋ctrs. • Shpg. 10 lbs.

Trailer Jacks

28-1613 28-1611 28-1610 28-1608 28-1609

3 PointRatchetJack

ITEM 1-3603$39.99• New, ratchet jack to adjust 3 point hitchon tractors. Clevis ends with pins. Greasezerks for threads.SPECIFICATIONS • Clevis inner width 11/16˝• Stroke 8˝ • Thread size 1¼˝-5• Handle 9˝ • Retracted lgth. 20¼˝• Clevis pins 1˝ • Shpg. 16 lbs.


800-488-3407 Rubber Rake Teeth & Toggle Clamps 17&

Toggle Clamps• New, toggle clamps for various work-holding applications.

Made from plated steel. Vinyl covered handle.• All have straight handles except for item numbersindicated with ** at the end which have T-handles.

Arms: S = Solid arm O = Open arm Spindle: N = Neoprene tipped H = Hex head P = Plastic

Vertical Toggle Clamps Holding Height Arm Mount Height ITEM Model Force Under Arm Opens Mount Centers Arm Spindle Closed Shpg. Price 14-1109-FF * 62620 100 lbs. ⅝˝ 100° 4 bolt base ⅝˝ x 15/16˝ O N 2½˝ ½ lb. $4.95 14-1109-E 62065 200 lbs. 1¼˝ 105° 4 bolt base ½˝ x 11/16˝ S None 4⅛˝ ½ lb. $4.95 14-1109-H * 62085 200 lbs. 13/16˝ 117° Clevis ½˝ S None 3¼˝ 1 lb. $4.95 14-1109-P * 62141 500 lbs. 13/16˝ 100° 4 bolt base ¾˝ x 1¼˝ S None 4⅝˝ 1½ lbs. $6.95 14-1109-R 62143 500 lbs. 19/16˝ 100° Clevis ¾˝ S None 6⅛˝ 1½ lbs. $6.95 14-1109-Y 62280 750 lbs. 13/16˝ 106° Clevis 1¼˝ S N 9⅜˝ 2 lbs. $8.95 14-1109-JJ GH-10250 950 lbs. 25/16˝ 100° Clevis 32mm(1¼˝) S H 10½˝ 4 lbs. $8.95 14-1109-HH 91507 1000 lbs. 23/16˝ 100° Clevis 1¼˝ O None 9½˝ 3 lbs. $10.95* T Handles

Angled Arm Vertical Toggle Clamps Holding Height Arm Mount Height ITEM Model Force Under Arm Opens Mount Centers Arm Spindle Closed Shpg. Price 14-1109-EE 62320 750 lbs. 3˝ 120° Straight 1⅛˝ S None 9¾˝ 3 lbs. $6.95

Horizontal Toggle Clamps Holding Height Arm Mount Lgth. ITEM Model Force Under Arm Opens Mount Centers Arm Spindle Closed Shpg. Price 14-1107-A 62010 50 lbs. ¾˝ 90° Straight 9/16˝ O None 2¾˝ ½ lb. $4.95 14-1109-A 62020 50 lbs. 7/16˝ 90° 2 bolt base 9/16˝ O None 2¾˝ ½ lb. $4.95 14-1107-B 62025 50 lbs. 7/16˝ 106° 4 bolt base ½˝ x ⅝˝ O P 2¾˝ ½ lb. $4.95 14-1107-C 62030 50 lbs. 9/16˝ 90° Straight 9/16˝ O None 2¾˝ ½ lb. $4.95 14-1108-B 62035 50 lbs. 7/16˝ 90° 2 bolt base 9/16˝ O None 2¾˝ ½ lb. $4.95 14-1108-C 62040 50 lbs. 7/16˝ 100° 2 bolt base 9/16˝ O None 2¾˝ ½ lb. $4.95 14-1108-G 62175 500 lbs. 15/16˝ 107° 4 bolt base 13/16˝ x 1⅛˝ S None 7½˝ 1 lb. $6.95 14-1108-I 62185 500 lbs. 19/16˝ 107° 4 bolt base 13/16˝ x 1⅛˝ O None 11˝ 2 lbs. $6.95 14-1108-K 62200 500 lbs. 1½˝ 90° Straight 1⅛˝ S None 11˝ 1 lb. $6.95

Toggle Pliers Holding Jaw Inner Width Jaw ITEM Model Force Open Closed Depth Spindle Notes Shpg. Price 14-1105-H 61470 700 lbs. 65/16˝ 211/16˝ 2½˝ ⅜˝-16 x 4⅛˝ — 1½ lbs. $9.95 14-1105-B 61390 700 lbs. 5⅛˝ 19/16˝ 29/16˝ ⅜˝-16 x 3⅛˝ — 1½ lbs. $9.95 14-1105-D 61420 700 lbs. 3⅞˝ 1¼˝ 2⅝˝ ⅜˝-16 x 3⅛˝ Quick release 1½ lbs. $9.95 14-1105-C 61410 — — 1⅝˝ 1¾˝ ⅜˝-16 x 3⅛˝ Vertical 1½ lbs. $7.95 14-1105-E 61430 — — 1½˝ 1¾˝ ⅜˝-16 x 3⅛˝ Vertical 1½ lbs. $7.95

TogglePliers

Vertical Angled Arm Horizontal

Rubber Rake Teeth• Brand new, rubber rake teeth by Global Solutions. Heattreated tines with injection molded rubber. Hook stylehead for maximum rubber adhesion. Sold individually orsave money with special pricing on factory box quanti-ties. Refer to our website for specific model and mfg partnumbers. Shpg. 1 lb. on single units.

Sold Individually Factory Box SalesYoke Bolt Tine Tine

ITEM Application Opening Hole Lgth. Diam. Price ITEM Qty. Shpg. Price1-3617 John Deere, many others,universal 1⅝˝ ⅜˝ 10˝ 9/32˝ $3.20 1-3617-100 100 55 lbs. $269.001-3618 New Holland,Allen rakes, Left Hand 155/64˝ ⅜˝ 10˝ 9/32˝ $3.70 1-3618-100 100 59 lbs. $329.001-3619 New Holland,Allen rakes, Right Hand 155/64˝ ⅜˝ 10˝ 9/32˝ $3.70 1-3619-100 100 59 lbs. $329.001-3620 John Deere, Vermeer 1⅝˝ ⅜˝ 10˝ 9/32˝ $3.60 1-3620-100 100 53 lbs. $319.001-3621 John Deere 1⅝˝ ⅜˝ 10˝ 9/32˝ $3.70 1-3621-100 100 55 lbs. $329.001-3622 Farmhand, New Idea,others * ⅜˝ 7˝ 9/32˝ $7.85 1-3622-50 50 50 lbs. $350.001-3623 Vermeer, Massey Ferguson * 1⅜˝ 5/16˝ 7¼˝ ¼˝ $5.80 1-3623-50 50 41 lbs. $259.001-3624 Ford, other windrowers 1⅛˝ 5/16˝ 7½˝ ¼˝ $3.95 1-3624-100 100 29 lbs. $349.001-3625 Heath windrowers 1¼˝ 5/16˝ 8˝ ¼˝ $3.95 1-3625-100 100 29 lbs. $349.00* Double tooth

18 Prince Hydraulic Stack Valves www.surpluscenter.com8

Prince SV Control Valves

• Brand new PRINCE SV compact sectionalvalves. Size and flow rating works well withtoday’s small and medium size tractors. Alsomany marine and industrial applications. Sec-tional design allows valves to be assembledwith combination of spools to meet your exactrequirements. Valves ship unassembled withassembly instructions, bolt kits and handle as-semblies.• One to eight spool valve assembly and your choice of spool types.All IN and OUT sections have both top and side ports.SPECIFICATIONS• Max. 16 GPM, flow rating 12 GPM (nominal) • Power beyond capability• Max. 3000 PSI • Work ports SAE 8• Adjust. relief valve 1500-3000 PSI, factory set 2000 PSI • IN/OUT ports:• Parallel circuit Open center SAE 8• Cast iron valve sections w/chrome plated spool Open center/power beyond IN, PBYO SAE 8, OUT SAE 10• Load checks each section Closed center SAE 10

To Order:1. Fill in how many spools you need. 4. Determine type of spool(s).2. Fill in valve option. 5. Add the price of valve option and3. Determine order of spool(s). each spool type for total cost.

Example1. You have determined you need a 3 spool valve with an open center outlet.2. You want the first and second spools to control double acting cylinders with springreturn to neutral; the third spool to control a hydraulic motor with detent positions.

3. You need to order the following:

ITEM 9SV - o - o - o o o o o o o o Total number of spools 3rd Spool (F - Motor Spool Detent)

Valve Option (X - Open Center) 2nd Spool (B - Double Acting Spring Return)

1st Spool (B - Double Acting Spring Return)

To determine price add:Valve Option (which was “X”) .........................................................$ 94.951st Spool (which was “B”) ...............................................................$ 67.952nd Spool (which was “B”)..............................................................$ 67.953rd Spool (which was “F”) ...............................................................$ 87.95

Total $318.80

ITEM 9SV - o - o - oooooooo Total number of spools Valve Option Order and type of spools

Valve OptionsX Open center .....................................$94.95Y Open center Power Beyond ..............$99.95Z Closed center (no relief)....................$85.95

Standard Spool TypesA Single acting spring return ................$71.95B Double acting spring return ...............$67.95C Double acting detent .........................$81.95D Float spool 4 position ........................$97.00E Motor spool spring return..................$74.95F Motor spool detent ............................$87.95

Series Spool Types• Allows more than one actuator to be op-erated at the same time. NOTE: Seriessection pressures are additive and the totalmust be less than the relief setting orpump pressure capability. Series sectioncannot be used in closed center applica-tions. Ports SAE 8.G Double acting series spring return ..$114.95H Motor spool series spring return .....$114.95I Motor spool series detent...............$128.95

Optional Spool Types• Ports SAE 8

J Double acting spring return............$125.95 with adj. (1500-3000 PSI) work port reliefsK Double acting spring return............$173.95 with adj. (1500-2500 PSI) work port reliefs and anti-cavitation checksL Double acting spring return ............$131.00 with pilot operated checksM Double acting spring return ...............$77.95 with metering notches in spool to allow better control of loadN Double acting spring return............$136.95 with metering and non-adj. work port reliefs set 2000 PSI

Model Size Shpg.1 Spool 8⅝˝ x 5⅞˝ x 3¼˝ 15 lbs.2 Spool 8⅝˝ x 7¼˝ x 3¼˝ 22 lbs.3 Spool 8⅝˝ x 8¾˝ x 3¼˝ 29 lbs.4 Spool 8⅝˝ x 10⅛˝ x 3¼˝ 36 lbs.5 Spool 8⅝˝ x 11⅝˝ x 3¼˝ 42 lbs.6 Spool 8⅝˝ x 13˝ x 3¼˝ 48 lbs.7 Spool 8⅝˝ x 14½˝ x 3¼˝ 55 lbs.8 Spool 8⅝˝ x 16˝ x 3¼˝ 60 lbs.

Quick OrderSV Valve Combinations

• The following are some of our most pop-ular configurations of the Prince SV valves.They have special item numbers to provideeasy ordering. Standard levers on eachspool. Furnished unassembled. Includesall necessary bolt kits and seals.

ITEM 9-7554 $235.95Loader Configuration• Open Center, both spools are doubleacting with spring centering.Reference 9SV-2-X-BB at left.

ITEM 9-7555 $259.95Loader Configuration w/float• Open Center, First spool double actingwith detented float position and doubleacting second spool.Reference 9SV-2-X-DB at left.

ITEM 9-7556 $305.95Loader Configuration w/Grapple• Open center, all three spools are doubleacting with spring centering.Reference 9SV-3-X-BBB at left.

ITEM 9-7557 $377.95Backhoe Configuration w/manual out-riggers.• Open Center, all four spools are doubleacting with spring centering.Reference 9SV-4-X-BBBB at left.

ITEM 9-7558 $519.95Backhoe Configuration w/hydraulicoutriggers.• Open Center, all six spools are doubleacting with spring centering.Reference 9SV-6-X-BBBBBB at left.

ITEM 9-7502 $683.55Backhoe Configuration w/Joystick Con-trols• Open Center, all six spools are doubleacting with spring centering. Two joysticklevers for ease of control. Outrigger sec-tions are in the middle and have individuallevers.Reference 9SV-6-X-BBBBBB at left andtwo of 9-1905 on next page.

3 X B B F

800-488-3407 Prince Hydraulic Stack Valves 19&

12 Volt DC SolenoidOperated SV Valves

• Brand new, Prince SV control valves with12 volt DC solenoid control for work sec-tions. Available in open center, open centerwith power beyond and closed center ver-sions with single or double acting cylinderspools (work ports blocked in neutral) ormotor spool (work ports open to tank inneutral). Open center and power beyondversions have a main inlet relief valve andspecial pressure buildup valve in outletsection to provide internal pilot pressure toshift the spools. Closed center valves donot have relief valve and do not require thebuildup section. These valves can be sup-plied in multi-section configurations oreven mixed with manual operated worksections. Please call our Tech Help 1-800-488-3407 for further information.

Valve OptionsX Open center ...................................$118.95Y Open center Power Beyond ............$121.95Z Closed center ...................................$86.95

Work Section OptionsP Single Acting Solenoid Operated....$283.00O Double Acting Solenoid Operated...$279.00Q Motor Spool Solenoid Operated .....$285.00Example: 9SV-2E-X-OO is a two spool, open center,12 volt DC solenoid operated directional controlvalve for double acting cylinders.

Prince 20 Series Control Valves

• Brand new, Prince Hydraulics 20 series valves. Interchange-able mounting with other popular brands of “20” gpm valves. Allsections have load check on each work port. Extra fine meter-ing capabilites, chrome plated spools. Outlet can be at eitherend of valve. Inlet section has both top and side inlet/outlet ports.• Parallel circuit. Rubber covered cast iron handles. Available in opencenter, open center with power beyond and closed center versions. Furnished unassem-bled with handles and all necessary bolt kits and seals. See lower portion of this pagefor joystick operators, remote cables and adapters for use with 20 series valves.SPECIFICATIONS• Flow rate 20 GPM nominal • Inlet/Outlet ports SAE 12• Pressure rating 3500 PSI max inlet • Power Beyond port SAE 10• Pressure rating 500 PSI max discharge • Work ports SAE 10• Relief valve 2201-3000 PSI preset 2500 • Mounting 3 thru holes (1 on inlet, 2 on outlet)(open center and power beyond only) • Available with 1-7 work sections.

To Order:1. Fill in how many spools you need. 4. Determine type of spool(s).2. Fill in valve option. 5. Add the price of valve option and3. Determine order of spool(s). each spool type for total cost.

Valve TypesX Open center with inlet relief................................................................................................$165.95Y Open center with inlet relief and Power Beyond ..................................................................$173.95Z Closed center (no relief valve)..............................................................................................$137.95

Spool TypesA Single acting cylinder, spring centered................................................................................$135.00B Double acting cylinder, spring centered...............................................................................$128.95C Double acting, cylinder 3 position mechanical detent ..........................................................$133.95D Double Acting Cylinder, spring centered w/detented Float position ......................................$169.95E Motor Spool, (work ports open to tank in neutral)spring centered........................................$134.95F Motor Spool, (work ports open to tank in neutral), 3 position mechanical detent .................$140.00L Double Acting Cylinder,spring center w/pilot operated checks.............................................$185.00

Assembled Valve Dimensions# Work Sections Size Mtg. Pattern Shpg.1 Spool 4⅞˝ x 8⅝˝ x 4⅜˝ 5⅜˝ x 2½˝ 15 lbs.2 Spool 6⅝˝ x 8⅝˝ x 4⅜˝ 5⅜˝ x 4¼˝ 22 lbs.3 Spool 8⅜˝ x 8⅝˝ x 4⅜˝ 5⅜˝ x 6˝ 29 lbs.4 Spool 10⅛˝ x 8⅝˝ x 4⅜˝ 5⅜˝ x 7¾˝ 36 lbs.5 Spool 11⅞˝ x 8⅝˝ x 4⅜˝ 5⅜˝ x 9½˝ 42 lbs.6 Spool 13⅝˝ x 8⅝˝ x 4⅜˝ 5⅜˝ x 11¼˝ 48 lbs.7 Spool 15⅜˝ x 8⅝˝ x 4⅜˝ 5⅜˝ x 13˝ 55 lbs.

ITEM 9-20 - o - o - ooooooo Total number of spools Valve Type Spool Type Designations

Please see example on previous page for how to order.

ITEM 9SV- oE - o - o Valve Option Work Section Option

Offset Straight

Remote Cable Controls for Prince Valves• Brand new. Remote controls for Prince Models SV (previous page), 20 Series (this page)and RD5000 Series (pages 13 & 16) control valves. Die-cast metal controller bodies. ITEM9-6704 is operated in one axis, ITEM 9-6704-J is operated in dual axis.• The single control (9-6704) requires one control cable and one connection kit. The joystickcontrol lever (9-6704-J) requires two control cables and two connection kits.

SV Valves 20 Valves Offset 9-1905 9-7514* Handle $95.95 $187.95 Straight 9-1904 9-7513* Handle $95.95 $187.95* Includes rubber boot

Control LeversITEM 9-6704 Single lever 4 lbs. $47.95ITEM 9-6704-J Joystick lever 6 lbs. $116.95ITEM 9-6704-JS 6 lbs. $221.95• Same as ITEM 9-6704-J except with SPSTmomentary pushbutton switch in handle.

Control CablesITEM 9-6705-59 59˝ lgth. 3 lbs. $43.95ITEM 9-6705-79 79˝ lgth. 4 lbs. $48.95ITEM 9-6705-98 98˝ lgth. 4 lbs. $52.95

Valve Connection Kits ½ lb. each

ITEM 9-6706-RD RD5000 Valve $32.95ITEM 9-6706-SV SV Valve $30.95ITEM 9-6706-20 20 Valve $27.95

JoystickHandles

• Brand new, PRINCEjoystick handles for usewith PRINCE stackvalves. Allows onelever to control two ad-jacent work sections.Right/left controls onework section, for-ward/backward con-trols the secondsection. Spools can beoperated independently or simultaneously.If two joysticks are installed on one stackvalve, it is recommended that there be twostandard work sections between them toprevent handle interference. Shpg. 5 lbs.

Total Number of Spools

20 Prince Hydraulic Directional Control Valves www.surpluscenter.com8

8 GPM Wolverine by Prince MB SeriesCompact Double Acting Directional Control Valves• Brand new WOLVERINE by PRINCE MB Series directional control valvefor operating double acting cylinders. Ideal for small tractor and other lowflow applications requiring a compact control valve. Features includemonoblock construction, load check, built-in adjusta ble pressure relief valve,spring centering spool action, open center with enclosed plug to convert topower beyond or closed center, side or top inlet/outlet ports and vertical orhorizontal handle mounting.SPECIFICATIONS• Flow 8 GPM max. • Open center convertible to power beyond or closed ctr.• Pressure 3500 PSI max. • In/Out ports SAE 8• Relief valve 2000 PSI, adj. 2000-3500 PSI • Work ports SAE 8• Reqd. filtration ISO 4406 19/17/14 • Mount 3 hole base

Motoring Spool Valves can be found on page 22

# Spools ITEM Style Size Shpg. Price

One 9-7861 DA spring centered 7⅝˝ x 4˝ x 2¼˝ 9 lbs. $ 95.95Two 9-7862 DA spring centered 7⅝˝ x 57/16˝ x 2¼˝ 12 lbs. $151.95Two 9-7862-F * DA spring centered w/float 9⅛˝ x 57/16˝ x 2¼˝ 12 lbs. $246.95Three 9-7863 DA spring centered 7⅝˝ x 613/16˝ x 2¼˝ 15 lbs. $200.95Four 9-7864 DA spring centered 7⅝˝ x 87/16˝ x 2¼˝ 18 lbs. $241.95Five 9-7865 DA spring centered 7⅝˝ x 913/16˝ x 2¼˝ 21 lbs. $337.95Six 9-7866 DA spring centered 7⅝˝ x 117/16˝ x 2¼˝ 24 lbs. $399.95

* First spool detented float

14 GPM Wolverine by Prince WVS SeriesDouble Acting Directional Control Valves

• Brand new, WOLVERINE by PRINCE WVS series monoblock directional con-trol valves. Features monoblock cast iron construction, load check, built-inadjustable pressure relief open center, side or top outlet port and vertical orhorizontal handle mounting.• Can be converted to closed center or power beyond with the addition of apower beyond sleeve ITEM 9-7998-PB (sold separately below).SPECIFICATIONS• Flow 14 GPM max. • Open center convertible closed center or power beyond • Pressure 4000 PSI max • In/Out ports SAE 8• Relief valve 2500 PSI, adj. 2200-3200 PSI • Work ports SAE 8• Reqd. filtration ISO 4406 19/ 17/ 14 • Mount 3 hole base

Motoring Spool Valves can be found on page 22

# Spools ITEM Style Size Shpg. Price

One 9-7974 DA spring centered 89/16˝ x 313/16˝ x 2¾˝ 9 lbs. $128.95Two 9-7976 DA spring centered 89/16˝ x 5¼˝ x 2¾˝ 12 lbs. $210.95Three 9-7977 DA spring centered 89/16˝ x 611/16˝ x 2¾˝ 16 lbs. $282.95Four 9-7978 DA spring centered 89/16˝ x 81/16˝ x 2¾˝ 20 lbs. $357.95Five 9-7979 DA spring centered 89/16˝ x 9½˝ x 2¾˝ 23 lbs. $418.95Six 9-7980 DA spring centered 89/16˝ x 1015/16˝ x 2¾˝ 26 lbs. $495.95

Power Beyond/Closed CenterConversion PlugITEM 9-7867-B $2.95• For use with Wolverine MB Series valves.Power beyond plug is necessary to convertvalves to closed center. Shpg. 1⁄10 lb.

Power Beyond/Closed CenterConversion SleeveITEM 9-7998-PB $21.95• For use with Wolverine WVS Series valves.Power beyond sleeve is necessary to con-vert valves to closed center. Shpg. ½ lb.

3 Position Detent KitITEM 9-7867-D $26.95• Detent kit for Wolverine MB Series valve.Converts spring centering spools to 3 po-sition manual detent. Shpg. ½ lb.

3 Position Detent KitITEM 9-7998-D $73.95• Detent kit for Wolverine WVS Seriesvalve. Converts spring centering spools to3 position manual detent. Shpg. 1 lb.

Joystick Handle KitITEM 9-7867-J $146.95• Brand new, straight joystick handle foruse with Wolverine MB Series valves. Al-lows one lever to control two different ad-jacent work sections. Spools can beoperated independently or simultaneously.If two joysticks are installed on one stackvalve, it is recommended that there be twostandard work sections between them toprevent handle interference.SPECIFICATIONS• Straight handle joystick control • Shpg. 2 lbs.

MB Series Accessories

WVS Series Accessories

Joystick Handle KitITEM 9-7998-J $209.95• Brand new, straight joystick handle foruse with Wolverine WVS Series valves. Al-lows one lever to control two different ad-jacent work sections. Spools can beoperated independently or simultaneously.If two joysticks are installed on one stackvalve, it is recommended that there be twostandard work sections between them toprevent handle interference. Shpg. 2 lbs.

800-488-3407 Hydraulic Control Valves 21&

One Spool PrinceControlValves

• Brand new PRINCE RD2500 Series.Monoblock high tensile strength gray castiron body. Hard chrome plated spools.Open center with conversion plug forclosed center applications. Load checks.SPECIFICATIONS• One spool valve • Adj. relief 1500-3000 PSI• Max. 20 GPM factory set at 1500 PSI• Max. 3000 PSI • Spring centering• IN/OUT ¾˝ NPT • Size 9 ˝ x 4¼˝ x 3 ˝• Work ports ½˝ NPT • Shpg. 12 lbs.

Single ActingITEM 9-6763 $93.95Double Acting – IN/OUT ½˝ NPT

ITEM 9-6764 $85.95• Not convertible to closed center.

Double ActingITEM 9-6765 $85.95Detent KitITEM 9-8028-D $20.95• 3 position manual detent kit. Shpg. 1 lb.

Prince SAControlValve

ITEM 9-6700$125.95• Brand new PRINCE RD5000 Series. Hy-draulic control valve for operating singleacting cylinders. Monoblock gray cast ironbody. Hard chrome plated spools. Opencenter. Load checks.SPECIFICATIONS• One spool valve • Adj. relief 1500-3000 PSI• Max. 25 GPM factory set at 2000 PSI• Max. 3000 PSI • Spring centering• IN/OUT ¾˝ NPT • Size 9½˝ x 5˝ x 3¼˝• Work port ½˝ NPT • Shpg. 16 lbs.

Single Acting 45 GPMControlValve

ITEM 9-7493$226.95• Brand new, BRAND HYDRAULICS ModelDC16T3LBS high flow directional controlvalve. Cast iron body with Buna-N O-rings.High lift, ball spring relief valve. Handle in-cluded.SPECIFICATIONS• Open center • Reqd. filtration 20 micron• One single acting cyl. spool• In/Out ports SAE 16spring to center 3 position• Work port SAE 16

• Flow 45 GPM max. • Mount 4 bolts on• Pressure 3000 PSI max. 4¾˝ x 3⅜˝ ctrs.• Relief valve adj. • Size 105/16˝ x 51/32˝ x 4¼˝set at 1500 PSI • Shpg. 18 lbs.

Single Spool45 GPM ControlValves

• Brand new, BRAND HYDRAULICS highflow directional control valve. Cast ironbody with Buna-N O-rings. High lift, ballspring relief valve. Handle included.SPECIFICATIONS• Open center • In/Out ports SAE 16• Flow 45 GPM max. • Work ports SAE 16• Pressure 3000 PSI max. • Mount 4 bolts• Relief valve adj. on 4¾˝ x 3⅜˝ ctrs.set at 1500 PSI • Size 105/16˝ x 51/32˝ x 4¼˝

• Reqd. filtration 20 micron • Shpg. 18 lbs.

ITEM 9-7494 $226.95• Model DC16T4LBS. One double actingcylinder spool, spring-to-center, 3-position.

ITEM 9-7495 $215.95• Model DC16O4LBS. One double actingmotor spool, spring-to-center, 3-position.

ITEM 9-7495-D $226.95• Model DC16O4LBD. One double actingmotor spool, 3-position detent.

Closed CenterITEM 9-7496 $198.95• Model DC16C4LS. Closed center. Onedouble acting cylinder spool, spring-to-center, 3-position. No relief valve. Size 91/16˝x 51/32˝ x 4¼˝.

Detent KitITEM 9-4895-D $36.95• 3 position manual detent kit. Shpg. 1 lb.

Power Beyond SleeveITEM 9-4895-B $13.95• Provides oil to a downstream valve. Ports¾˝ NPT. Shpg. 1 lb.

Prince Control Valves• Brand new PRINCE RD5000 Series monoblock con-trol valves. Double acting spools. Cast iron valve body,chrome plate spools. Parallel spool circuit allows anycombination of spools to be used simultaneously. AllPrince RD 5000 Series valves can be used with thePrince cable controls on page 15. Closed center con-version plug, power beyond sleeve and three positiondetent kit sold below.Cylinder Spools - Work ports blocked in neutral. Loadchecks prevent load from dropping when spool is shifted.SPECIFICATIONS• Max. 25 GPM • Adjustable relief valve 1500-3000 PSI factory set at 2000 PSI• Max. 3000 PSI • Spring centering

NPT Ports SAE Ports• IN/OUT ¾˝ NPT, • IN/OUT SAE 12Work Ports ½˝ NPT Work Ports SAE 10

Available with your choice of NPT or SAE ports

One Spool Valves 30 GPMNPT Ports SAE Ports

ITEM ITEM Style Size Shpg. Price

9-6701 9-1789 DA spring centered 9½˝ x 5˝ x 3¼˝ 16 lbs. $120.959-6701-F 9-1789-F DA spring centered w/float 9½˝ x 5˝ x 3¼˝ 16 lbs. $140.95

Two Spool Valves 25 GPMNPT Ports SAE Ports


9-6702 9-7875 DA spring centered 9½˝ x 7¼˝ x 3¼˝ 25 lbs. $188.959-6702-F 9-7875-F DA spring centered w/float 9½˝ x 7¼˝ x 3¼˝ 25 lbs. $211.95

Three Spool Valves 25 GPMNPT Ports SAE Ports


9-6703 9-7876 DA spring centered 9½˝ x 9½˝ x 3¼˝ 36 lbs. $272.959-6703-F 9-7876-F DA spring centered w/float 9½˝ x 9½˝ x 3¼˝ 36 lbs. $292.95

Closed Center PlugITEM 9-4895-C $13.95• Use to convert RD5000 valves toclosed center. NOTE: Conversion doesnot allow for drain-off of standby spoolleakage. This can allow a small amountof oil to enter the work ports when valveis in neutral. Shpg. 1 lb.

22 Hydraulic Motor Spool Valves www.surpluscenter.com8

14 GPMMotorControlValve

ITEM 9-7975$156.95• Brand new, WOLVERINE by PRINCEWVS Series monoblock directional controlvalves. Features cast iron construction,load check, built-in adjustable pressure re-lief, open center, side or top outlet port andvertical or horizontal handle mounting.Spool details: spool 1 DA motor spool, 3position detent.• Can be converted to closed center orpower beyond with the addition of a powerbeyond sleeve our ITEM 9-7998-PB (soldseparately on page 20).SPECIFICATIONS• Model WVS11C5C1 • Reqd. filtration• Open center ISO 4406 19/ 17/ 14• Spools one • In/Out ports SAE 8• Flow 14 GPM max. • Work ports SAE 8• Pressure 4000 PSI max. • Mount 3 hole base• Relief valve 2500 PSI, • Size 89/16˝ x 313/16˝ x 2¾˝adj. 2200-3200 PSI • Shpg. 9 lbs.

Compact8 GPM MotorControlValve

ITEM 9-7860$120.95• Brand new PRINCE MB Series directionalcontrol valve for operating rever sible hy-draulic motors. Ideal for small tractor andother low flow applications requiring a com-pact control valve. Features includemonoblock construction, built-in adjusta blepressure relief valve, three position detentspool action, open center with enclosedplug to convert to power beyond or closedcenter, side or top inlet/outlet ports and ver-tical or horizontal handle mounting.SPECIFICATIONS • Flow 8 GPM max.• Open center convertible to• Reqd. filtrationpower beyond or closed ctr. ISO 4406 19/17/14• Pressure 3500 PSI max. • In/Out ports SAE 8• Relief valve 2000 PSI, • Work ports SAE 8adj. 2000-3500 PSI • Mount 3 hole base• Size 7⅝˝ x 4˝ x 2¼˝ • Shpg. 9 lbs.

4 SpoolValve

ITEM 9-6506$299.95• New HUSCO 5000 Series. Use to controlfour reversible hydraulic motors. All spoolsare spring centering.SPECIFICATIONS • No relief valve• Rated 20 GPM max. • IN/OUT ports SAE 10• Rated 3000 PSI max. • Work ports SAE 8• Closed center • Shpg. 34 lbs.

Rotary ControlValve

ITEM 9-7872$156.95• Brand new, PRINCE RD512JD5A4B3 di-rectional control valve with rotary spool.Single spool, double acting. Turning spool90° CW goes to full spool in and 90° CCWto full spool out. Detent in center position.Use for controlling hydraulic motors. Nohandle.SPECIFICATIONS• Open center • In/Out ports ¾˝ NPT• Flow 30 GPM max. • Work ports ½˝ NPT• Pressure 3000 PSI max. • Mount 3 holes thru body• Relief adj. to 1500-3000, • Size 9½˝ x 5˝ x 3¼˝preset at 2000 PSI • Shpg. 16 lbs.

Single Spool 18 GPMControlValve

ITEM 9-7458$212.95• Brand new, BRAND HYDRAULICS ModelSDCF755M184LF1 directional control valvewith flow control. Combines a 4-way direc-tional control valve with a full range, pres-sure-compensated, by-pass type flowcontrol valve, and an adjustable pilot-oper-ated relief valve. Extremely fine flow meter-ing to the work ports in direct proportion tothe handle movement. Cast iron body withBuna-N O-rings. Handle included.SPECIFICATIONS• Open center • Reqd. filtration 30 micron• Spool 1 double acting, • In/Out ports ¾˝ NPTmetered flow motor spool,• Work ports ½˝ NPTfriction detent • Mount 3 bolts on

• Flow 18 GPM max. 25/16˝ x 311/16˝ x 315/16˝ ctrs.• Pressure 3000 PSI max. • Size 8⅜˝ x 4¼˝ x 33/16˝• Relief valve adj. set 1500 PSI • Shpg. 8 lbs.

High Flow MotorControlValvesw/ Flow Control

$334.95 each• Brand new, BRAND HYDRAULICS direc-tional control valve with flow control. Com-bines a 4-way directional control valve witha full range, pressure compensated, by-pass type flow control valve and a pilot op-erated relief valve. Extremely fine flowmetering to the work ports in direct propor-tion to the handle movement. Cast iron bodywith Buna-N O-rings. Handle included.SPECIFICATIONS• Open center • Reqd. filtration 20 micron• One double acting, • In/Out ports SAE 16metered flow motor spool,• Work ports SAE 16friction detent • Mount 4 bolts

• Pressure 3000 PSI max. on 4¾˝ x 3⅜˝ ctrs.• Relief valve adj. • Size 91/16˝ x 51/32˝ x 4¼˝set at 1500 PSI • Shpg. 18 lbs.

ITEM Model GPM9-7497-45 DCF16M454LF1 45 max.9-7497-30 DCF16M304LF1 30 max.

Prince Motor Spool Valves

• Brand new PRINCE RD5000 Seriesmonoblock motor spool control valves.Work ports connected to tank in neutral somotor can free wheel. No load checks. Cast ironvalve body, chrome plate spools. Parallel spoolcircuit allows any combination of spools to work si-multaneously. Closed center conversion plug, power beyondsleeve and three position detent kit sold on page 18.SPECIFICATIONS• Max. 25 GPM • IN/OUT ¾˝ NPT, work ½˝ NPT • Adjustable relief valve 1500-3000 PSI• Max. 3000 PSI • Spring centering factory set at 2000 PSI

ITEM Spools Size Shpg. Price9-6759 One 9½˝ x 5˝ x 3¼˝ 16 lbs. $124.959-6760 Two 9½˝ x 7½˝ x 3¼˝ 25 lbs. $201.959-6761 Three 9½˝ x 9½˝ x 3¼˝ 36 lbs. $287.95

Flow/DirectionalControl

ValveITEM 9-5174$212.95

• Brand new BRAND HYDRAULICS. Com-bines a directional control valve with pres-sure compensated flow control in onebody. Use to control speed and directionon cylinders, motors. Work ports blockedin neutral. Frictional detent on handle tomaintain constant speed. Open center.SPECIFICATIONS • IN/OUT ¾˝ NPT• 18 GPM max. • Work ports ½˝ NPT• 3000 PSI max. • Size 7⅜˝ x 3⅜˝ x 3¼˝• Adj. relief valve • Shpg. 7 lbs.

One Spool PrinceMotorControlValves

• Brand new PRINCE RD2500 Series.Monoblock high tensile strength gray castiron body. Hard chrome plated spools.Open center with conversion plug forclosed center applications. Load checks.SPECIFICATIONS• One spool valve • Adj. relief 1500-3000 PSI• Max. 20 GPM factory set at 1500 PSI• Max. 3000 PSI • Spring centering• IN/OUT ¾˝ NPT • Size 9 ˝ x 4¼˝ x 3 ˝• Work ports ½˝ NPT • Shpg. 12 lbs.

ITEM Spool Action Price9-6766 Spring Centered $88.959-6767 3 Position Detent $94.95

2 Spool, 14 GPM PrinceJoystick LoaderControlValve

ITEM 9-8185$301.95

• Brand new PRINCE LVR1GB5AB6. Twospool joystick valve for operating doubleacting cylinders with float on first spool.Features include monoblock gray cast ironbody, hard chrome plated spools, loadchecks and spring centering spools. Thetwo spools controlled by joystick lever canbe operated independently or simultane-ously depending on handle movement.Open center that can be converted topower beyond by changing conversionplug. Ideal for use on front end loaders, lifttrucks, and other mobile equipment.SPECIFICATIONS• Open center • Pressure 3000 PSI max.• Spools two • In/Out ports SAE 10• Flow 14 GPM max. • Work ports SAE 8• Relief valve factory • Mnt. 6 drilled/tapped holesset at 2000 PSI • Size 2¾˝ x 6⅜˝ x 9½˝adjustable 1500-3000 PSI • Shpg. 25 lbs.

3 Spool 25 GPMPrince

JoystickValve

W/Grapple Control

ITEM 9-8217$389.95

• Brand new PRINCE HC-V-BP22. Threespool joystick valve for operating doubleacting cylinders with first spool float andthird spool single lever to operate a doubleacting grapple cylinder. Features includemonoblock gray cast iron body, hardchrome plated spools, load checks andspring centering spools. The two spoolscontrolled by joystick lever can be oper-ated independently or simultaneously de-pending on handle movement. Opencenter can be converted to power beyondor closed center by changing conversionplug. Ideal for use on front end loaderswith a grapple or other attachments, lifttrucks, and other mobile equipment.SPECIFICATIONS• Open center • Pressure 3000 PSI max.• Spools three • In/Out ports SAE 12• Flow 25 GPM max. • Work ports SAE 10• Relief valve • Mount 3 holes thru bodyfactory set at 2000 PSI • Size 15˝ x 9¾˝ x 3¼˝adjust. 1500-3000 PSI • Shpg. 39 lbs.

800-488-3407 Hydraulic Joystick & Directional Valves 23&

3 Spool HuscoValve

ITEM 9-6432 $149.99• New HUSCO Model 9110C13 C02F01 M -534. Directional control valve. 3 spring-centering, double acting cylinder spools inparallel to each other. 1st spool has de-tented fourth position float, 3rd spool hasfourth position detent. No handles.SPECIFICATIONS• 25 GPM • Open center• 3000 PSI • IN/OUT SAE 12/16• Main relief fixed 3050 PSI • Work ports SAE 10• Adj. work port relief valve • 3 bolt mounton 1st spool preset • Size 13⅜˝ x 8¼˝ x 3˝to 3400 PSI • Shpg. 33 lbs.Single Handle KitITEM 9-6432-H 1 lb. $34.95ITEM 9-7175 $219.95• Same as ITEM 9-6432 above except in-cludes handles. Shpg. 35 lbs.

4 SpoolValve

ITEM 9-5213$199.95• New HUSCO 5000 Series. 4 spool valve.3 spools for double acting and 1 spool forsingle acting cylinders. Open center.Spring centering. No handles.SPECIFICATIONS• GPM 20 • IN/OUT ½˝ BSPP• PSI 3500 • Work ports• Open center ⅜˝ BSPP for DA spools,• Adj. main relief ½˝ BSPP for SA spool• Work port reliefs on spools • Size 10˝ x 9¼˝ x 3½˝3 and 4 set at 1850 PSI • Shpg. 31 lbs.

3 Spool, 33 GPMValves

• New, HUSCO Series 9610 control valvefor double acting cylinders. First and sec-ond spools have 12 VDC spool lockout,SAE 10 ports. 12 volts must be applied tothe lockout to allow the spools to shift.Second spool has work port relief on Bport, lockout has a manual over-ride. Thirdspool has SAE 12 ports and a normallyclosed switch that switches when thespool is shifted. No handles.SPECIFICATIONS• Open center • In/Out ports SAE 12• Flow 33 GPM max. • Work ports SAE 10 / SAE 12• Pressure 3625 PSI max. • Mount 2 bolt• Relief valve • Size 14⅝˝ x 9½˝ x 3¼˝3050 PSI non-adj. • Shpg. 41 lbs.

ITEM 9-7687 $139.99• Model CNH-87461943, yellow paint.

ITEM 9-7659 $139.99• Model CNH-87461942, black paint.

2 Spool, 10 GPMJoystick Loader

Control ValveITEM 9-7401$248.95

• Brand new. BRAND ModelLV22RFSTKAB. Compact twospool joystick valve for oper-ating double acting cylinders.Ideal for use on front endloaders on small to medium

sized tractors, lift trucks, andother mobile equipment requir-

ing a compact valve. The two spools canbe operated independently or simultane-ously depending on handle movement.First spool has regenerative feature forrapid extension of cylinder and secondspool has float to allow free movement ofcylinder. Open center. Optional conversionsleeve for power beyond or plug for closedcenter operation sold separately. Springcentering spool action with detented fourthposition for float or regenerative spools.SPECIFICATIONS• 10 GPM • Double acting• 3000 PSI • In/Out ports SAE 8• Adj. relief 800-3000 PSI • Work ports SAE 8set at 2000 • Size 5½˝ x 2⅜˝ x 17⅞˝

• Open center • Shpg. 14 lbs.

Power Beyond SleeveITEM 9-7401-B $18.95• Provides oil to a downstream valve. PortSAE 8. Shpg. ½ lb.

Closed Center PlugITEM 9-7401-C $18.95• For closed center systems with variabledisplacement pumps. Shpg. ½ lb.

2 Spool, 25 GPMJoystick Valvew/Float

ITEM 9-4782$299.95• Brand new PRINCE RD5000Series. Two spool joystick valvefor operating double actingcylinders. Ideal for use on frontend loaders, lift trucks, andother mobile equipment. Thetwo spools can be operated in-dependently or simultaneouslydepending on handle movement. Firstspool float. Open center. Spring centering.SPECIFICATIONS• 25 GPM, 3000 PSI • IN/OUT ¾˝ NPT• Double acting • Work ports ½˝ NPT• 1500-3000 adj. relief • Size 7½˝ x 3¼˝ x 11˝set 2000 PSI • Shpg. 26 lbs.

Power Beyond SleeveITEM 9-4895-B $13.95• Provides oil to a downstream valve. Ports¾˝ NPT. Shpg. 1 lb.

Closed Center PlugITEM 9-4895-C $13.95• Use to convert RD5000 valves to closedcenter. NOTE: Conversion does not allow fordrain-off of standby spool leakage. This canallow a small amount of oil to enter the workports when valve is in neutral. Shpg. 1 lb.

Power BeyondSleeveITEM 9-8185-B$17.95• Provides oil to a downstream valve onPrince LVR series directional controlvalves. Port SAE 8. Shpg. ½ lb.

24 Hydraulic Log Splitter Valves & Books www.surpluscenter.com8

1 Spool, 30 GPMClosed CenterLog SplitterValve

ITEM 9-8021$149.95• Brand new, PRINCE RD5000 series hy-draulic control valve for operating cylinderswith closed center hydraulic systems. Idealfor use with farm tractors and industrialequipment with variable displacementclosed center systems for operating logsplitters. Pressure operated detent on re-turn stroke, spring center on extend foruse with log splitters or other auto detentapplications. Pressure-release detent ad-justable from 1000 to 2000 PSI.SPECIFICATIONS• Closed center • Relief valve no relief• Spools one • In/Out ports ¾˝ NPT• Flow 30 GPM max. • Work ports ½˝ NPT• Pressure 3000 PSI max. • Mount 3 hole base• Detent release • Size 9½˝ x 5˝ x 3¼˝pressure 1400 PSI • Shpg. 16 lbs.

Prince Auto-CycleControlValve

ITEM 9-6587$270.95• Brand new PRINCE. Special Auto-Cyclevalve allows operator to completely cycle(out and back) a double acting cylinder byonly one handle movement. Ideal for logsplitter applications.• Both levers are pulled out to detent posi-tion, cylinder extends and at end of forwardstroke one lever automatically returns toneutral and cylinder reverses. When fully re-tracted second lever returns to neutral. (3work ports are used, two are tied togetherand then run to rod end of cylinder, thirdconnects to base end of cylinder).SPECIFICATIONS• For 1 double acting cyl. • Adj. relief 1500-3000 PSI• GPM 25 max. factory set at 2000 PSI• PSI 3000 max. • Double press. relief detent• IN/OUT ¾˝ NPT • Size 9½˝ x 7½˝ x 3¼˝• Work ports ¾˝ NPT • Shpg. 28 lbs.

w/ Power BeyondITEM 9-6587-PB $277.95• Brand new PRINCE Model RD523 -MMEE5A4C1. Same as our ITEM 9-6587only with a power beyond. Ideal for logsplitter applications.SPECIFICATIONS • PSI 3000 max.• For 1 double acting cyl. • Adj. relief 1500-3000 PSI• GPM 25 max. factory set at 2000 PSI• IN/OUT / power beyond • Double press. relief detent¾˝ NPT • Size 9½˝ x 7½˝ x 3¼˝

• Work ports ¾˝ NPT • Shpg. 29 lbs.

Two Spool Log Splitter/LifterValveITEM 9-7414$229.95• Brand new PRINCE Model RD522 CC EA -5A4B1 control valve. Ideal for use in logsplitters equipped with a log lift. Twospools for double-acting cylinders. Firstspool has a pressure release detent on thespool-out position and springs to centeron the spool-in position. Second spool is3-position spring to center. Detent pres-sure preset to 1200 PSI, adjustment range1000-2000 PSI.SPECIFICATIONS • Adjustable relief valve• Open center preset to 2000 PSI• 25 GPM max. Adj. range 1500-3000 PSI• 3000 PSI max. • Three bolt mount• IN, OUT ports ¾˝ NPT • Size 9½˝ x 7½˝ x 3¼˝• Work ports ½˝ NPT • Shpg. 29 lbs.

Hydraulic Study Courses

$36.95 EACH• Brand new. Published by WOMACK Edu -ca tional Publications. These texts provideanswers to your questions, not just theo-ries of operation. Widely used to train em-ployees and customers regarding basichydraulic principles. Shpg. 1½ lbs.

ITEM 9-1124INDUSTRIAL FLUID POWER - VOL. I• Broad coverage of pumps, cylinders, valvesand accessories. 288 pages. 350 illus.

ITEM 9-1125INDUSTRIAL FLUID POWER - VOL. II• Specific application data of air and hy -drau lic cylinders and valves used to con-trol them. 272 pages. 350 illus.

ITEM 9-1126INDUSTRIAL FLUID POWER - VOL. III• Includes applications using hydraulic ro-tary power. Comprehensive coverage onhydraulic motors, air motors, hydraulictransmissions, and rotary actuators. 248pages. 250 illus.

ITEM 9-1127FLUID POWER IN PLANT AND FIELD• General reference based on years of ex -pe ri ence in hydraulic field. Provides prac-tical information on installation, operationand servicing of hydraulic and pneumaticequipment. 232 pages. 350 illus.

Fluid PowerData Book

ITEM 9-1022$1.50• Brand new. 63 pages of valuable infor-mation on hyd. cylinders, motors, pumpsand systems. Formulas and tables forequipment selection. Also information onelectric fans and motors. Shpg. 6 oz.Add 80¢ Postage and Handling If Ordering Alone

PocketReference

ITEM 1-1456$12.95• Brand new. 768 pages packed full of in-formation yet small enough to fit in a shirtpocket. Chapters on air and gas, carpen-try, chem istry, computers, electricity, math,hardware, plumbing, steel and materials,surveying, welding and more. Hundreds ofconversion formulas. Size 3¼˝ x 5⅜˝ x ¾˝.Shpg. ¼ lb.

Economy 1 Spool, 25 GPMLog SplitterValveITEM 9-7724$64.95• Brand new, hydraulic control valve foroperating hydraulic cylinders. Pressure op-erated detent on return stroke, spring cen-ter on extend for use with log splitters orother auto detent applications. Spool 1double acting cylinder, spring center ex-tend/auto detent retract.SPECIFICATIONS • Detent release• Open center pressure 1100 PSI• Spools one • In/Out ports ¾˝ NPT• GPM 25 max. • Work ports ½˝ NPT• PSI 2750 max. • Mount 3 hole base• Relief valve adj. set • Size 9¼˝ x 4⅜˝ x 3˝at 2200 PSI • Shpg. 12 lbs.

Prince Log SplitterValves

• Brand new PRINCELS3000. For control of double acting cylin -ders. Open center, built-in adjustable reliefvalve. No load checks.SPECIFICATIONS• 25 GPM • IN/OUT ¾˝ NPT• Adj. relief set at 2250 PSI • Work ports ½˝ NPT• PSI 2750 max. • Pressure release detents• Size 9¼˝ x 5˝ x 3˝ adj. 1000-2000 PSI

ITEM 9-1262 $74.95• Pressure release detent in return stroke,spring center on extend. Ideal for operatingdouble acting cylinder on log splitters.Shpg. 11 lbs.

ITEM 9-1684 $90.95• Same as ITEM 9-1262 except ¾˝ NPTports. Shpg. 10 lbs.

ITEM 9-1518 $90.95• Pressure release detent in both direc-tions. Shpg. 10 lbs.

ITEM 9-1517 $90.95• Spring return to neutral. Shpg. 8 lbs.

Special Low

Price!

Find Log Splitter PumpsOn Page 33

Surplus Center Carries A WideRange of Log Splitter Components

800-488-3407 Pilot Operated & Single Acting Valves 25&

Single SpoolValve

ITEM 9-5508$79.99

• New GRESEN V20C. Closed center, pilotoperated, double acting valve. Load checkcartridge in one work port. IN/OUT portsSAE 12, pilot ports SAE 6. Load sensingport SAE 4. Rated 3500 PSI max., 30GPM. Min. 300 PSI required for pilot andstandby load sensing pressure. Size 11¼˝x 5˝ x 4¼˝. Shpg. 24 lbs.

3 SpoolValves

ITEM 9-5212$99.95• New KYB. Three spool valve for operat-ing hydraulic cylinders. Spools 1 and 3 fordouble acting cylinders, spool 2 for oper-ating single acting cylinders. Spool 3 hasa work port relief and a built-in flow restric-tion machined into spool to reduce cylin-der speed. Spring centering. No handles.This valve must be used with cylinders.SPECIFICATIONS• GPM 17 • IN/OUT, work ports spool 2• PSI 3000 ½˝ British pipe thread• Open center • Work ports spools 1 and 3• Adj. main relief ⅜˝ British pipe thread• Size 12˝ x 7¼˝ x 3½˝ • Shpg. 27 lbs.

ITEM 9-5210 $89.95• Same as ITEM 9-5212 above except nowork port relief on spool 1.

3 SpoolSA Valve

ITEM 9-1705-A$89.95• New KONTAC. For control of single actingcylinders. Spring return to center for lift po-sition. Detent located for return oil to tankfor use as float. Open center. No handles.SPECIFICATIONS • IN/OUT SAE 12• 12 GPM • Work ports SAE 10• 3000 PSI • Size 9˝ x 8¼˝ x 3¾˝• Relief valve set at 2000 PSI • Shpg. 31 lbs.

Sectional Control Valves

• New VOAC. Sectional control valves for hydraulic cylin-ders. Choose between open center power beyond,closed center, or closed center with load sense. Allspools are spring centered. Non-adjustable relief valve,work port reliefs. No handles.SPECIFICATIONS• IN/OUT Power beyond SAE 10 • Work ports SAE 8 • Load sense SAE 6 • PSI 3500 max. • GPM 21 cont., 24 max.• Size: Two spool 8˝ x 8⅞˝ x 3½˝ Three spool 8⅞˝ x 8⅞˝ x 3½˝

SPOOL TYPES SA = Single Acting DA = Double Acting FL = Float Spool Type Main Relief Work Ports Relief PSI 1 2 3 PSI 1 2 3

9-30900 Closed center SAFL SAFL 3045 23 lbs. $39.99

9-30897 Closed center SA SA 3045 23 lbs. $39.99

9-30896 SA SA 2320 23 lbs. $39.99

9-20706 SAFL SAFL 3045 23 lbs. $39.99

ITEM Spool Option Shpg. Price

A None None B 2175 2175 A None None B 2175 2175 Open center A None None Power beyond B 2175 2175 Closed center A None None Load sense B 2175 None

Pilot Control ValveITEM 9-5536$37.50

• New DYNEX DP Series.Control valve used in variabledisplacement hydraulic sys-tems for volume and direc-tional control. Valve is installedin the compensator circuit of

pump and is used to control vol-ume and fluid direction to operate pilot op-erated hydraulic valve. 400 PSI max. inletpressure. Two position with friction detent.One work port B, control port CP, pressureinlet P and tank port T. In first position, Bport connected to T, P is blocked with zeropump flow. In second position, P is opento B. 45° handle movement. Shpg. 11 lbs.Ports: Work SAE 6 Tank ⅜˝ NPT Control port IN ¼˝ NPT

Joystick Controller

ITEM 9-7720$119.95• New BOSCH REXROTHModel 4TH6ZXX joystick stylehydraulic pilot control. Usewith two spool, pilot operateddirectional control valve (not in-cluded). Two functions can be performedsimultaneously. Requires a handle (not in-cluded) with M12-1.75 threaded end.Closed center. Seven rear ports.SPECIFICATIONS • Mount 4 hole 4¼˝ bolt circle• Pressure 725 PSI max. • Ports SAE 6• Back pressure 45 PSI max.• Size 4˝ x 4˝ x 7½˝• Flow rate 4 GPM • Shpg. 11 lbs.

Pilot OperatedControlValveITEM 9-7361$139.95• New, BRAND HYDRAULICS Model DC -16 T4PSTN four way pilot-operated, direc-tional control valve for controlling adouble-acting cylinder. Cast iron body,Buna N O-rings.SPECIFICATIONS • Spring center,• Open center pilot operated spool• 45 GPM max. • IN, OUT, work ports SAE 16• 3000 PSI max. • Pilot ports ¼˝ NPT• No relief valve • Mount four bolts on• Pilot pressure 3⅜˝ x 4¾˝ centers150 PSI full shift • Size 7⅛˝ x 4½˝ x 4¼˝max. 500 PSI • Shpg. 17 lbs.

3 SpoolValveITEM 9-1386$69.95• New CESSNA. 3 spool hydraulic controlvalve with 2 single acting spools and 1double acting spool. Open center. Springcentering spools. No handles. NOTE: Oilflow from pump is blocked when eithersingle acting spool is shifted to the retractposition. A relief or unloading valve may berequired to protect system from high pres-sure. Inlet flow required to retract the singleacting cylinder.SPECIFICATIONS • Rated 16 GPM• Two outer spools for • Relief set at 2000 PSIsingle acting cyl. • Ports SAE 8 (¾-16)• Center spool for • Size 7˝ x 8˝ x 4˝double acting cyl. • Shpg. 21 lbs.

Two SpoolValve

ITEM 9-2594$39.95• New CESSNA 31512. Two spool valvefor operating two single acting cylinders.Spring center spool action. Open center.No handles.SPECIFICATIONS• 10 GPM • IN/OUT SAE 8• 2500 PSI • Work ports SAE 6• Adj. relief • Size 6¾˝ x 5½˝• Load checks • Shpg. 16 lbs.

Large Displ.Char-LynnSteeringValves

• New CHAR-LYNN 35 series steeringcontrol. Full time control for fluid linkedsteering systems on large vehicles such asgraders, scrapers, articulated vehicles, etc.For closed center systems.NOTE: Manual steering capability is notpossible without input hydraulic power.Provision for emergency fluid powersource is recommended.SPECIFICATIONS FOR BOTH• System Closed Center • Column mount• Motor Type Geroler 4 bolt square, 3¼˝ B.C.• PSI 2500 • Shaft internal 12 T spline• GPM 35 cont. 40 int. • Body mount 4 holes• Rotation reversible 6⅜˝ B.C & 3 tapped• Ports SAE 16 holes on side of body

ITEM 9-9648 $439.50SPECIFICATIONS • Model 202-1006• Disp. 150 cu. in. / rev. • Size 5¾˝ x 5¾˝ x 11¾˝• RPM 50 cont. 60 int. • Shpg. 65 lbs.

ITEM 9-9635 $399.50SPECIFICATIONS • Model 202-1004• Disp. 100 cu. in. / rev. • Size 5¾˝ x 5¾˝ x 10˝• RPM 80 cont. 90 int. • Shpg. 55 lbs.

12 VDCSolenoidValve

ITEM 9-4703$519.99• New GRESEN MD12. Pilot operated so-lenoid control valve. Stackable design formultiple spool applications.SPECIFICATIONS• 12 VDC • Motor spool• 3000 PSI • Pilot ports SAE 4• 40 GPM • IN/OUT SAE 14• Spring centering spool • Work ports SAE 14• Pilot pressure 65-3000 PSI • Size 8¾˝ x 2½˝ x 8¾˝• Closed center • Shpg. 25 lbs.

26 Hydraulic Solenoid Valves www.surpluscenter.com8

D05 Subplate

ITEM 9-4175 $56.99• New DAMON. Aluminum subplate forvalves with D05 subplate porting. Side portsSAE 8. Size 4˝ x 3˝ x 1¼˝. Shpg. 1 lb.

Subplates

D03 Subplates• Brand new D03 aluminum subplatesfor solenoid operated valves.• Parallel circuit for closed center valves.• Series circuit for open center valves. Parallel Series

Parallel SeriesITEM ITEM Stations Ports Shpg. Price

9-4070-1 9-5883-1 1 SAE 6 2 lbs. $ 37.959-4070-2 9-5883-2 2 IN SAE 10, OUT SAE 12, Work SAE 8 6 lbs. $ 99.959-4070-3 9-5883-3 3 IN SAE 10, OUT SAE 12, Work SAE 8 7 lbs. $114.95

12 VDCAmperage 3.5

Size 8¾˝ x 1⅞˝ x 2⅛˝

120 VACAmperage 0.35

Size 7¾˝ x 1⅞˝ x 2⅛˝

12 VDCAmperage 1.67

115 VACAmperage 0.18

Directional Control Valves

• Brand new HYDRAFORCE dual solenoiddirectional control valves.

SPECIFICATIONS • Pressure 3500 PSI • Mount 2 hole side 2˝ c/c• Spools one • In/Out ports SAE 6 • Size 2½˝ x 1¾˝ x 7¾˝• Flow 5 GPM • Work ports SAE 6 • Shpg. 5 lbs.

Voltage ITEM Price Valve Type Spool Details9-7987 $101.95 Open center Work ports blocked in neutral9-7989 $101.95 Closed center All ports blocked in neutral9-7988 $101.95 Open center All ports open to tank in neutral9-7990 $129.99 Open center Work ports blocked in neutral9-7992 $129.99 Closed center All ports blocked in neutral9-7991 $129.99 Open center All ports open to tank in neutral

Hydraulic Solenoid Valves• Brand new EATON VICKERS DG4V-3 Series. Dual so-lenoid directional valves for operating hydraulic cylinders,motors and other actuators. Spring centering spoolaction. Manual over-ride on solenoids. Subplate mounting requires D03 subplate for portconnections. Use with two Hirschmann connectors (not incl.) for wiring.SPECIFICATIONS• GPM 10½ • PSI 3000 • Ports D03 subplate mtg. • Shpg. 6 lbs.

Voltage ITEM Price Valve Type Spool Details9-6136 $120.95 Open center Work ports blocked in neutral9-6138 $119.95 Closed center All ports blocked in neutral9-6137 $119.95 Open center All ports open to tank in neutral9-7235 $151.95 Open center Work ports blocked in neutral9-7237 $155.95 Closed center All ports blocked in neutral9-7236 $149.95 Open center All ports open to tank in neutral

Solenoid Coil Wire ConnectorITEM 11-2457 $4.95• Brand new HIRSCHMAN style connector for installation of wires to sole-noid coil. Two connectors required for each solenoid valve. Shpg. ½ lb.

12 VDC ClosedCenterValve

ITEM 9-4699 $242.95• Brand new PARKER. Double solenoidcontrol valve with work ports tied to tankin neutral for use with hydraulic motors.Parallel design can be bolted together forcontrolling multiple motors.SPECIFICATIONS • 12 VDC, 4 amps• 3000 PSI max. • IN SAE 6• 12 GPM max. • OUT/work ports SAE 8• Double acting • Size 11˝ x 2½˝ x 3⅞˝• Closed center • Shpg. 12 lbs.

12 VDC HydraulicSolenoidValve

ITEM 9-7774 $89.99• New, EATON-VICKERS DG4V-3 SeriesModel DG4V-3-0C-M-U-G7-60, double-solenoid control valve. Spring centeringspool. Manual override on solenoids. Re-quires D03 subplate for port connections.Use with two Hirschmann connectors(ITEM 11-2457 sold separately) for wiring.SPECIFICATIONS• Open center spool • Flow 10.5 GPM max• All ports open to • Pressure 3000 PSI maxtank in neutral • Use with D03 subplate• Voltage 12 VDC • Size 8¾˝ x 1⅞˝ x 2⅛˝• Amperage 3.5 Amps • Shpg. 6 lbs.

24 VDC DirectionalControl Valves

• New NORTHMAN. Dual solenoid controlvalves with 24 VDC coils. Rated 4500 PSI,16 GPM capacity, max. 2000 PSI backpressure. Requires DO3 subplate. Size 9˝x 2˝ x 3˝. Shpg. 6 lbs.

ITEM 9-4676 $89.95• Both work ports tied to tank and inletblocked in neutral. Use for motors onclosed center systems.ITEM 9-4677 $89.95• Closed center with work port A blockedand work ports B open to tank in neutral.Use for double acting cylinders with loadholding one way or hydraulic motors.

12 VDC MotorControlValve

ITEM 9-7312 $99.95• New PARKER Model D1VW20 DNKWF -75XB613. Double solenoid style directionalvalve for operating hydraulic motors. 2 po-sition, detented spool action. Momen tarypower application locks valve spool intodetent. No neutral position. Requires D03subplate for port connections.SPECIFICATIONS• 11.5 GPM • 2 amps• 5000 PSI • D03 subplate mounting• 1500 PSI max. tank press.• Size 9¾˝ x 113/16˝ x 2¼˝• 12 volt DC solenoids • Shpg 6 lbs.

12 VDC SolenoidOperatedSelectorValve

ITEM 9-7986$129.99• Brand new HYDRAFORCE. Three port 12volt DC solenoid operated selector valve.Use to switch pump flow from one circuitto a different circuit.SPECIFICATIONS • Ports SAE 12• Flow 15 GPM • Terminal connection• Pressure 3500 PSI wire leads• Voltage 12 volt DC • Size 4˝ x 2¼˝ x 8˝• Amperage 2.8 amps • Shpg. 8 lbs.

Solenoid ControlledPriority Valve

ITEM 9-4017$69.99• New HYCOMP. 12 VDC solenoid turnspriority divider on and off. Use in circuitswhere all pump’s flow is required exceptfor times when priority is needed. Prioritycircuit flow is 1 GPM (could be changed byenlarging orifice disc). 2500 PSI relief valveon priority circuit. Max. input flow 20 GPM.Inlet and bypass ports SAE 10. Priority andtank ports SAE 6. Size 6˝ x 2½˝ x 5¾˝.Shpg. 8 lbs.

4500 PSI SteelBallValve

ITEM 9-6171-16-S$59.95• New LHA Model MBV16S medium dutyball valve. Steel body with chrome-platedbrass ball. Includes handle.SPECIFICATIONS• SAE 16 ports • Size 4⅜˝ x 2¼˝ x 2½˝• Rated to 4500 PSI • Shpg. 7 lbs.

800-488-3407 Hydraulic Solenoid Valves 27&

12 VDCAmps 1.67

115 VACAmps 0.18

12 VDC & 115 VACSolenoidOperatedPoppetValves

• Brand new HYDRAFORCE. Solenoid op-erated 2 way poppet type valves. Use forstarting, stopping, or dumping of hydrauliccircuits to 3000 PSI. Available in N.O. orN.C. configurations with 12 volt DC or 115volt AC coils. Continuous rated solenoidswith hardened seats for long life and lowleakage. Rated 12-15 GPM, ports SAE 8.Shpg. 2 lbs.

Voltage ITEM Valve Type Price9-5112-NO Normally Open $61.959-5112-NC Normally Closed $52.959-5111-NO Normally Open $74.959-5111-NC Normally Closed $66.95

12 VDC N.C. 2-WaySolenoid Valve

With 3 Ports

ITEM 9-7747$49.99

• New, HYDRAFORCEModel SF08-2010H-6N-12-DL two-way so-lenoid valve. Two sideports common to eachother. When de-ener-

gized, the valve acts as acheck valve and flow is allowed from thebottom port to the two side ports, reverseflow is blocked. When energized flow is al-lowed from the two side ports to the bot-tom port but flow in the opposite directionis severely restricted. 18˝ wire leads.SPECIFICATIONS• Voltage 12 VDC • Duty continuous• Amperage 1.2 Amps • Ports ⅜˝ NPT• Flow 5 GPM max. • Size 2˝ x 1¼˝ x 315/16˝• Pressure 5000 PSI max. • Shpg. 2 lbs.

115 VAC ControlValve

ITEM 9-6323$59.95• New PARKER FPS Series. Two way, twoposition control valve.SPECIFICATIONS • Two bolt thru-hole• 115 VAC mount on 1⅞˝ ctrs.• 3000 PSI • Ports ⅜˝ NPT• 6 GPM rated flow • Size 4¼˝ x 1⅞˝ x 4⅞˝• Normally open • Shpg. 4 lbs.

12 VDC Solenoid OperatedDouble Selector Valves

• Brand new. Dual 12 volt DC solenoid operated dou-ble selector/multiplier valve. Use to expand the num-ber of tractor remotes or operate two different circuitsconsisting of cylinders or motors from a single direc-tional valve. Rated 3000 PSI. Terminal connections are¼˝ spade. Choose between individual or primary cir-cuit types with two different rated flow rates.

Individual Circuit Selector• Each circuit has its own coil that is energized to allow a directional control valve to op-erate the circuit selected. When used with “variable flow” or “closed center” systemsvalve can be used as a selector, or power both solenoids to direct fluid to both circuits atthe same time. A SPDT-CO switch or two momentary pushbutton switches are requiredto operate selector valve. ITEM Flow Ports Amps Size Shpg. Price 9-5117 15 SAE 8 1.67 4½˝ x 2½˝ x 6½˝ 7 lbs. $149.99 9-7738 20 SAE 12 2.6 5¼˝ x 3˝ x 8⅞˝ 15 lbs. $321.95Primary Circuit Selector• Primary type allows a directional control valve to operate one circuit with no power toselector valve. To select the other circuit, both solenoids are powered. This operation al-lows selection to be done by a SPST pushbutton or toggle switch. Ideal for operating a“thumb” on a loader bucket. ITEM Flow Ports Amps Size Shpg. Price 9-5117-A 6 SAE 8 1.67 4½˝ x 2½˝ x 6½˝ 7 lbs. $149.99 9-7738-A 15 SAE 12 2.6 5¼˝ x 3˝ x 8⅞˝ 15 lbs. $321.95

9-7738 Series 9-5117 Series

Hydraforce Coils• New. Replacement coils for Hydra forcesolenoid operated valves. Continu ous dutyrated. Check model number stamped intocartridge wrench flats to determine whichtype you have. Shpg 1 lb. Cartridge ITEM Voltage Type Connections Price 9-6301012 12 VDC SV08 Dual Spades $10.95 9-6302012 12 VDC SV08 Dual Leads $13.95 9-6351012 12 VDC SV10,12,16 Dual Spades $17.95 9-6303024 24 VDC SV08 Single Stud $10.95 9-6351048 48 VDC SV10,12,16 Dual Spades $12.95 9-6356110 110 VDC SV10,12,16 DIN $12.95 9-6365024 24 VAC SV10,12,16 Dual Leads $18.95 9-6365115 115 VAC SV10,12,16 Dual Leads $26.95 9-6366230 230 VAC SV10,12,16 DIN $22.95

New Arrivals Dailywww.surpluscenter.com

CrossoverReliefWith MakeupChecks

ITEM 9-5373$57.99• New, crossover relief valve with makeupchecks. Mounts directly onto manifoldported hydraulic motors. Use in closedloop systems to control shock of rapid re-verse. Checks prevent cavitation and pres-sure through reservoir connection.SPECIFICATIONS • Motor mount 4 bolt• Work ports SAE 8 1⅛˝ x 2½˝ (manifold)• Tank port SAE 6 • Size 4¾˝ x 7½˝ x 2½˝• Adj. relief range • Shpg. 5 lbs.

40 GPM SingleSelectorValves

$69.95 each• Brand new, CROSS high flow, single se-lector valves. Use to switch pump flowfrom one circuit to a different circuit.SPECIFICATIONS• Flow 40 GPM max. • Size 6⅛˝ x 4⅛˝ x 2⅝˝• Mount 2 holes on 3˝ ctrs. • Shpg. 8 lbs.

ITEM Model Ports PSI9-7897 VS4BKLF7 1˝ NPT 25009-7898 VS4BKLF9 SAE 16 3000

28 Hydraulic Accessory Valves www.surpluscenter.com8

20 GPM PrinceFloatValves

$62.95 each• Brand new, PRINCE float valves. Usewith standard 4 way, 3 position valves toprovide a float or free wheeling position.Con nects inlet to both outlets when spoolis pushed in, blocks both outlets whenspool is pulled out.SPECIFICATIONS • Mnt. 2 holes on 2⅛˝ ctrs.• Flow 20 GPM max. • Size 3¾˝ x 3¼˝ x 2⅜˝• Pressure 2500 PSI max. • Shpg. 6 lbs.

ITEM Model Ports9-7899 SS-2B1D ½˝ NPT9-7900 SS-3B1D SAE 8

20 GPM SingleSelectorValves

$60.95 each• Brand new PRINCE. Two position two-way selector valves. Directs pump flow toselect between two circuits. Also use toselect between two different single actinghydraulic cylinders from one valve.SPECIFICATIONS • Two position• Flow 20 GPM • Size 5⅛˝ x 3¼˝ x 2¼˝• PSI 2500 • Shpg. 6 lbs.

ITEM Model Ports9-6133 SS-1A1D ⅜˝ NPT9-6134 SS-2A1D ½˝ NPT

DoubleSelectorValves

$94.95 each• Brand new PRINCE. Allows one controlvalve to operate two different double act-ing cylinders or reversible motors. Also useto select between two different circuitsfrom one hydraulic source. 2500 PSI.Shpg. 13 lbs.

ITEM GPM Ports 9-4128 20 ½˝ NPT 9-6131 30 ¾˝ NPT 9-6132 40 1˝ NPT

30 GPMSingleSelectorValves

$84.95 each• Brand new, PRINCE single selectorvalves. Use to switch pump flow from onecircuit to a different circuit.SPECIFICATIONS • Mnt. 2 holes on 3⅞˝ ctrs.• Flow 30 GPM max. • Size 4⅝˝ x 4⅛˝ x 1¾˝• Pressure 3000 PSI max. • Shpg. 9 lbs.

ITEM Model Ports9-7895 RD-950 ½˝ NPT9-7896 RD-975 ¾˝ NPT

High PressureBall Valves

• Brand new, DYNAMIC Fluid Components GE2 Seriesball valves. Suitable for hydraulic and water applications.Constructed of high-carbon steel with zinc-chromateplating. Standard POM ball seals with Buna stem seals.Temperature range -30 to 212° F.

ITEM PSI Ports Size Shpg. Price 9-7281-4 7250 ¼˝ NPT 2.80˝ x 1.18˝ x 1.38˝ 1½ lbs. $22.95 9-7281-6 7250 ⅜˝ NPT 2.87˝ x 1.38˝ x 1.57˝ 2 lbs. $23.95 9-7281-8 7250 ½˝ NPT 3.27˝ x 1.46˝ x 1.69˝ 3 lbs. $26.95 9-7281-12 5800 ¾˝ NPT 3.74˝ x 1.77˝ x 2.17˝ 5 lbs. $46.95 9-7281-16 5000 1˝ NPT 4.45˝ x 2.17˝ x 2.56˝ 7 lbs. $56.95 9-7282-4 7250 SAE 4 2.80˝ x 1.18˝ x 1.38˝ 1½ lbs. $22.95 9-7282-6 7250 SAE 6 2.87˝ x 1.38˝ x 1.57˝ 2 lbs. $23.95 9-7282-8 7250 SAE 8 3.27˝ x 1.46˝ x 1.69˝ 3 lbs. $26.95 9-7282-12 5800 SAE 12 3.74˝ x 1.77˝ x 2.17˝ 5 lbs. $46.95 9-7282-16 5000 SAE 16 4.45˝ x 2.17˝ x 2.56˝ 7 lbs. $56.95

Electric FlowControl

ITEM 9-5178 $520.95• Brand new BRAND HYDRAULICS. Vari-able flow control valve with 12 volt DCcontroller for remote operation. Gives con-venient hydraulic motor speed control fromtractor cabs.SPECIFICATIONS• 12 volt DC control • Ports SAE 12• Flow range 0 - 15 GPM • Size 9½˝ x 5˝ x 1⅞˝• 3000 PSI max. • Shpg. 12 lbs.

Inline Needle Valve• Brand new, WOLVERINE by PRINCE inline needle valves.Designed to provide flow control in both directions.Carbon steel body. 5000 PSI.

ITEM Model Ports GPM Shpg. Price9-7961-4 WNV-400 ¼˝ NPT 0-5 1 lb. $ 19.959-7961-6 WNV-600 ⅜˝ NPT 0-8 2 lbs. $ 26.959-7961-8 WNV-800 ½˝ NPT 0-15 3 lbs. $ 33.959-7961-12 WNV-1200 ¾˝ NPT 0-25 4 lbs. $ 60.959-7961-16 WNV-1600 1˝ NPT 0-40 7 lbs. $146.95

Inline Flow Control Valve• Brand new, WOLVERINE by PRINCE inline flow control valves. Designed to provide flowcontrol and shut-off in one flow direction while providing free flow in the opposite direc-tion. Color bands for easy flow adjustments and fast return to previous setting. Set screwto lock valve to any setting. Carbon steel body. 5000 PSI.

ITEM Model Ports GPM Shpg. Price9-7960-4 WFC-400 ¼˝ NPT 0-5 1 lb. $ 23.959-7960-6 WFC-600 ⅜˝ NPT 0-8 2 lbs. $ 25.959-7960-8 WFC-800 ½˝ NPT 0-15 3 lbs. $ 28.959-7960-12 WFC-1200 ¾˝ NPT 0-25 4 lbs. $ 60.959-7960-16 WFC-1600 1˝ NPT 0-40 7 lbs. $146.95

800-488-3407 Hydraulic Flow Divider & Relief Valves 29&

Relief Valves

$41.95 each• Brand new, PRINCE.Compact adjust able reliefvalves. Inline (3 port) con-nection. Hardened ballseat for long life.SPECIFICATIONS • 1000-2500 PSI adj. range• 2500 PSI max. • Size 1½˝ x 1½˝ x 4½˝• Adj. relief set at 1500 PSI • Shpg. 3 lbs.

ITEM Ports Max. GPM9-1556 ½˝ NPT 16 GPM9-4127 ¾˝ NPT 20 GPM

Double Pilot OperatedCheckValves

$96.95 each• Brand new PRINCE. Double pilot oper-ated lock valve designed to lock a cylinderin place when control valve is in the neutralposition. Double internal pilot checks.SPECIFICATIONS• PSI 3000 • Size 5˝ x 2˝ x 1¾˝ • Shpg. 9 lbs.

ITEM Model Ports GPM9-5606-50 RD1450 ½˝ NPT 259-5606-75 RD1475 ¾˝ NPT 30

Inline Relief Valves• Brand new PRINCE. Inline relief valves. Differential poppet design provides smooth andquiet performance with a minimum variation between cracking and full pressure.SPECIFICATIONS• GPM 30 • PSI 3000 PSI • Size 3¼˝ x 2⅞˝ x 5˝ • Shpg. 5 lbs.

ITEM Model Ports Relief Range Price9-6135-50-L RV-4L ½˝ NPT 500-1500 PSI $41.959-6135-50-H RV-4H ½˝ NPT 1500-3000 PSI $41.959-6135-75-L RV-2L ¾˝ NPT 500-1500 PSI $41.959-6135-75-H RV-2H ¾˝ NPT 1500-3000 PSI $41.95

Priority ValveswithRelief

$107.95 each• Brand new PRINCE. Fixed flow prioritydi vider valve. Use to split pump output intoa fixed, priority flow and a balance flow foruse in the primary hydraulic circuit. Pres-sure relief valve on the priority port is fac-tory preset to 1500 PSI.SPECIFICATIONS• Adjustable • IN & excess ¾˝ NPT• 30 GPM max. input flow • Priority port ½˝ NPT• 3000 PSI max. • Size 4¾˝ x 4⅛˝ x 1¾˝• Relief port ⅜˝ NPT • Shpg. 9 lbs.

ITEM Model Priority Flow9-4158-1.5 RD405-R-1.5 1.5 GPM9-4158-2 RD405-R-2 2 GPM9-4158-3 RD405-R-3 3 GPM9-4158-4 RD405-R-4 4 GPM9-4158-5 RD405-R-5 5 GPM9-4158-6 RD405-R-6 6 GPM9-4158-7 RD405-R-7 7 GPM9-4158-8 RD405-R-8 8 GPM9-4158-9 RD405-R-9 9 GPM9-4158-10 RD405-R-10 10 GPM9-4158-12 RD405-R-12 12 GPM9-4158-14 RD405-R-14 14 GPM

Adjustable Flow Controls• Brand new PRINCE. Speed remains constant regardless of load. “Con trolled flow” port ispro por tional to orifice diameter that changes from full closed to full open. Pressure com-pensated OUT flows. Three female threaded ports. 3000 PSI. Size 5˝ x 4¼˝ x 3˝. Shpg. 8 lbs.With Built-in Relief• Built-in adjustable relief valve set at 1500 PSI for controlled flow circuit. ITEM Model Ports GPM Price9-064-38 RDRS137-8 ⅜˝ NPT 0-8 $86.959-064-50 RDRS150-16 ½˝ NPT 0-16 $86.959-064-75 RDRS175-30 ¾˝ NPT 0-30 $88.95

With No Relief• Ideal for closed center systems by plugging excess port.ITEM Model Ports GPM Price9-4169-8 RD108-8 SAE 8 0-8 $77.959-4169-10 RD110-16 SAE 10 0-16 $77.959-4169-12 RD112-30 SAE 12 0-30 $77.95

Proportional Flow Dividers• Brand new. Divides flow into two equal volume outputs regard-less of load variations. Integral check valves allow free return flowthrough valve in reverse. For hydraulic circuits or motors that op-erate at same speed. Not for synchronizing cylinder travel.

ITEM Model Ports PSI GPM Shpg. Price9-1048-A RD337-8 ⅜˝ NPT 3000 0-8 8 lbs. $98.959-1048-B RD350-16 ½˝ NPT 3000 8-16 8 lbs. $98.959-1048-C RD375-30 ¾˝ NPT 3000 16-30 8 lbs. $98.95

AdjustablePriorityFlowDividers$87.95 each• Brand new PRINCE. Adjustable constantvolume priority divider. Use in applicationswhere two circuits are to be supplied by asingle pump such as power steering sys-tems. Inlet flow is divided into two flows:priority flow which remains constant, andexcess flow to power and auxiliary circuit.Priority flow adjustable from 2 to 14 GPM.SPECIFICATIONS • Adj. priority 2-14 GPM• 30 GPM max. input • Size 5¾˝ x 4½˝ x 1¾˝• 3000 PSI • Shpg. 8 lbs.

ITEM Model Ports9-5024-38 RD537 ⅜˝ NPT9-5024-50 RD550 ½˝ NPT9-5024-75 RD575 ¾˝ NPT

Double Relief Valves• Brand new PRINCE. Cushion valve or double relief valve. Use to stop or minimize surge,shock and overload in hydraulic circuits. Installs between control valve and motor or cylin-der. Bypasses to opposite side to prevent cavitation. 30 GPM max. Shpg. 8 lbs.

ITEM Model Ports Relief Range Price9-4019-50-L DRV-4LL ½˝ NPT 500-1500 PSI $67.959-4019-50-H DRV-4HH ½˝ NPT 1500-3000 PSI $67.959-4019-75-L DRV-2LL ¾˝ NPT 500-1500 PSI $67.959-4019-75-H DRV-2HH ¾˝ NPT 1500-3000 PSI $67.95

SequenceValve

ITEM 9-4708$109.95• Brand new PRINCE Model RD1075SH.Use to have cylinders operate in sequencewith each other. Adjustable pilot pressure.No oil is directed toward sequence port untilinlet pressure reaches the pilot setting.Check valve allows flow from sequence toinlet port so cylinder can retract. Drain portmust be connected to tank. Spool designgives smooth flow but should not be usedfor low leakage applications.SPECIFICATIONS• Inlet/Sequence • Adj. pilot 1400-2500 PSIports ¾˝ NPT • Size 6½˝ x 1¾˝ x 4˝

• Drain port ⅜˝ NPT • Shpg. 8 lbs.

30 Hydraulic Steering Valves www.surpluscenter.com8

17˝ SteeringWheel

ITEM 9-6560$135.95• Brand new. Made for use with steeringcolumns of hydraulic power steeringvalves. Black molded plastic with fingergrips around the outside of the wheel. Hubfits over 36 tooth 0.858˝ steering columnshaft. Flat dish. Does not include nut forcolumn or center cap. 17˝ diam. 2¾˝ hubdepth. Shpg. 5 lbs.

Steering Column NutITEM 9-6560-N Shpg. ¼ lb. $5.80Steering Column Cap

ITEM 9-6560-C Shpg. ¼ lb. $31.95

Char-Lynn Steering Valves• Brand new Char-Lynn power steering valves. Use with standard 12 tooth splined steering columns.2500 PSI max. pressure. Open center. Four ⅜˝-16 mounting holes on 3¼˝ B.C.• Available in two different load circuit options:

Non load reaction - Steering cylinder ports blocked in neutral, locking axle position when operatorreleases steering wheel.Load Reaction - Steering cylinder ports are tied together in neutral, allowing axle forces to returnsteering wheel to original position when wheel is released (similar to steering in an automobile).

Seal Kit ITEM 64466-000 Shpg. ¼ lb. $42.95

Non Load Reaction Load Reaction ITEM Model ITEM Model Displ. GPM Ports Size Shpg. Price 9-1880 211-1001 N/A N/A 4.5 2-4 SAE 6 5¼˝ x 3⅜˝ x 3¾˝ 14 lbs. $515.95 9-7110 211-1002 N/A N/A 5.9 2-4 SAE 6 5⅜˝ x 3⅜˝ x 3¾˝ 14 lbs. $515.95 9-7111 211-1003 N/A N/A 7.3 2-4 SAE 6 5½˝ x 3⅜˝ x 3¾˝ 14 lbs. $521.95 9-7112 211-1157 N/A N/A 8.9 2-4 SAE 6 5⅝˝ x 3⅜˝ x 3¾˝ 14 lbs. $530.95 9-7113 211-1007 9-7099 211-1047 4.5 4-8 SAE 8 5¼˝ x 3⅜˝ x 3¾˝ 13 lbs. $522.95 9-1881 211-1008 9-7100 211-1048 5.9 4-8 SAE 8 5⅜˝ x 3⅜˝ x 3¾˝ 13 lbs. $522.95 9-7114 211-1009 9-7101 211-1049 7.3 4-8 SAE 8 5½˝ x 3⅜˝ x 3¾˝ 13 lbs. $528.95 9-7115 211-1137 9-7102 211-1159 8.9 4-8 SAE 8 5⅝˝ x 3⅜˝ x 3¾˝ 14 lbs. $537.95 9-1882 211-1010 9-7103 211-1050 9.7 4-8 SAE 8 5¾˝ x 3⅜˝ x 3¾˝ 14 lbs. $542.95 9-1883 211-1011 9-7104 211-1051 11.3 4-8 SAE 8 5⅞˝ x 3⅜˝ x 3¾˝ 14 lbs. $559.95 9-1884 211-1012 9-7105 211-1052 14.1 4-8 SAE 8 6⅛˝ x 3⅜˝ x 3¾˝ 15 lbs. $574.95 9-7116 211-1158 N/A N/A 17.9 4-8 SAE 8 6¾˝ x 3⅜˝ x 3¾˝ 15 lbs. $583.95 9-1801 211-1167 N/A N/A 17.9 8-16 SAE 8 6¾˝ x 3⅜˝ x 3¾˝ 15 lbs. $606.95 9-1802 211-1177 N/A N/A 23.8 8-16 SAE 8 6⅞˝ x 3⅜˝ x 3¾˝ 16 lbs. $659.95 9-1803 211-1178 N/A N/A 29.7 8-16 SAE 8 7½˝ x 3⅜˝ x 3¾˝ 17 lbs. $695.95 9-1804 211-1160 N/A N/A 35.6 8-16 SAE 8 8⅛˝ x 3⅜˝ x 3¾˝ 19 lbs. $740.95 9-1805 211-1179 N/A N/A 47.5 8-16 SAE 8 8⅞˝ x 3⅜˝ x 3¾˝ 21 lbs. $856.95

Char-Lynn TorqueGenerators

• Brand newCHAR-LYNNtorque gen e -ra tors. Con nect

directly to steering shaft on manual steer-ing systems for power assist to the steer-ing linkage. Also use for manually operatedgates, control valves, other situations re-quiring powerful rotary motion from lowinput. Made to be mounted with no axialor radial loads on either shaft, not made foruse with a pinion gear or sprocket. Gerotorpower element.SPECIFICATIONS FOR ALL• PSI 1000 max. • Shafts ⅞˝ diam. x 1½˝,• Input torque 14-22 in-lb. w/woodruff key &• Ports SAE 6 5/16˝ diam. thru-hole• 50 lb. max. output • Three 5/16˝-18 mtg. holesshaft side-load on 2½˝ B.C. on input end

ITEM 9-7122 $505.95SPECIFICATIONS• Model 217-1049 • Output torque• Displ. 4.7 cu. in. 550 in-lb. at 1000 PSI• Input flow 3 GPM • Size 63/16˝ x 3⅝˝ x 313/32˝• RPM 125 max. • Shpg. 10 lbs.

ITEM 9-7123 $542.95SPECIFICATIONS• Model 217-1050 • Output torque• Displ. 5.9 cu. in. 700 in-lb. at 1000 PSI• Input flow 3.5 GPM • Size 6⅜˝ x 3⅝˝ x 313/32˝• RPM 118 max. • Shpg. 10 lbs.

ITEM 9-7124 $511.95SPECIFICATIONS• Model 217-1048 • Output torque• Displ. 9.7 cu. in. 1100 in-lb. at 1000 PSI• Input flow 5 GPM • Size 6¾˝ x 3⅝˝ x 313/32˝• RPM 102 max. • Shpg. 11 lbs.

Char-Lynn SteeringColumns

• Brand new Char-Lynn. Direct bolt toChar-Lynn, Dan foss or Von Ruden steeringvalves with 12 T internal spline. All have0.858˝ dia. 36 T serrated end for steeringwheel, threaded for lock nut. Horn wire. ITEM Lgth. Shpg. Price 9-1885 2½˝ 3 lbs. $70.95 9-1886 6˝ 3 lbs. $81.95 9-1887 12˝ 4 lbs. $96.95 9-8018 18˝ 5 lbs. $112.95 9-8019 30˝ 7 lbs. $124.95

Series 2 Column

ITEM 9-5192 $57.50• New CHAR-LYNN 204-3016. Steeringcolumn for Series 2 valves only. 12 toothspline shaft and 4 hole, 2.323˝ diam. boltcircle mounts directly to Char-Lynn Series2 valves. 0.688˝ diam. serrated end forsteering wheel, threaded for locknut. 30¼˝lgth. Overall lgth. 323/16˝. Shpg. 8 lbs.

TiltSteeringColumns

ITEM 9-7874 ITEM 9-7874-L• New, CHAR-LYNN tilt steering columnfor use with hydraulic steering valves. 5 dif-ferent lockable tilt angles.SPECIFICATIONS • Steering valve spline• Steering wheel spline 0.80˝ dia. 12 tooth0.858˝ dia. 36 tooth • Mount 47/16˝ holes• Steering wheel thread on 3¼˝ B.C.13/16˝-20 • Tilt angles• Overall height 13½˝ +20°, +10°, 0°, -10°, -20°

ITEM 9-7874 $119.99• Pushbutton under rubber boot to release.Shpg. 8 lbs.

ITEM 9-7874-L $119.99• Lever extends from rubber boot to re-lease. Shpg. 9 lbs.

ShuttleValve

ITEM 9-6361$15.95• Brand new HYDRAFORCE LSV1-6T-N.Hydraulic ball-type shuttle valve for use asa load-shuttling directional selector. Floatingball checks to the low pressure side. Com-monly used to direct oil from the high pres-sure side of a bi-directional hydraulic motorto a pressure-released hydraulic brake.SPECIFICATIONS• 7 GPM max. • Ports SAE 6• 3500 PSI • Shpg. 1 lb.

Planter MarkerValveITEM 9-4414$87.95• Brand new CROSS. Sequence valve de -signed to alternately operate a pair of agri-cultural guide marker cylinders on aplanter row marker system. Valve plumbsinto the lift cylinder circuit on the planter.Can be used on single or double actingmarker cylinders. 2 GPM, rated 2500 PSI,three ports SAE 8. Shpg. 6 lbs.

60 GPM ReliefValve

ITEM 9-4704$164.95

• Brand new PARKER RPL. Inline pilot op-erated relief valve.SPECIFICATIONS• 60 GPM • Ports SAE 16• Adj. 500-5000 PSI • Size 6¾˝ x 3⅜˝ x 2⅝˝• Factory set 3000 PSI • Shpg. 7 lbs.

800-488-3407 Hydraulic Check Valves 31&

1˝ NPT, 50 GPMHydraulicRelief Valve

ITEM 9-7901$109.95• Brand new, BUYERS PRODUCTS ModelHRV10025 inline (3 port) relief valve. Balland spring direct acting style. Cast ironbody. Three mounting holes for ⅜˝ bolts.SPECIFICATIONS• Flow rating 50 GPM max • Ports 1˝ NPT• Pressure relief range • Gauge port ¼˝ NPT1501-3000 PSI • Size 9⅜˝ x 3½˝ x 3¼˝• Factory setting 2000 PSI • Shpg. 10 lbs.

NPT

SAE

Inline Check Valves• Brand new, DYNAMIC HSP series hard seat, inline checkvalves. Available with NPT or SAE ports with 5 PSI or 65 PSIcracking pressures. Plated steel.

PSI Rated WidthITEM (Max) GPM Ports (Across Flats)Length Shpg. Price

5 PSI Cracking9-7933-4-5 5000 6 ¼˝ NPT 0.87˝ 2.44˝ ½ lb. $10.959-7933-6-5 5000 10 ⅜˝ NPT 0.95˝ 2.87˝ ½ lb. $13.959-7933-8-5 5000 18 ½˝ NPT 1.14˝ 3.50˝ 1 lb. $16.959-7933-12-5 3000 30 ¾˝ NPT 1.50˝ 4.25˝ 2 lbs. $21.959-7933-16-5 3000 36 1˝ NPT 1.69˝ 5.12˝ 3 lbs. $30.959-7933-20-5 3000 50 1¼˝ NPT 2.40˝ 5.56˝ 7 lbs. $53.959-7933-24-5 3000 60 1½˝ NPT 2.56˝ 5.56˝ 8 lbs. $55.9565 PSI Cracking9-7933-4-65 5000 6 ¼˝ NPT 0.87˝ 2.44˝ ½ lb. $10.959-7933-6-65 5000 10 ⅜˝ NPT 0.95˝ 2.87˝ ½ lb. $13.959-7933-8-65 5000 18 ½˝ NPT 1.14˝ 3.50˝ 1 lb. $16.959-7933-12-65 3000 30 ¾˝ NPT 1.50˝ 4.25˝ 2 lbs. $21.959-7933-16-65 3000 36 1˝ NPT 1.69˝ 5.12˝ 3 lbs. $31.959-7933-20-65 3000 50 1¼˝ NPT 2.40˝ 5.56˝ 7 lbs. $53.959-7933-24-65 3000 60 1½˝ NPT 2.56˝ 5.56˝ 8 lbs. $55.95

PSI Rated WidthITEM (Max) GPM Ports (Across Flats)Length Shpg. Price

5 PSI Cracking9-7934-4-5 5000 6 SAE 4 0.87˝ 2.56˝ ½ lb. $11.959-7934-6-5 5000 10 SAE 6 0.94˝ 2.91˝ ½ lb. $14.959-7934-8-5 5000 18 SAE 8 1.18˝ 3.74˝ 1 lb. $16.959-7934-12-5 3000 30 SAE 12 1.50˝ 4.29˝ 2 lbs. $24.959-7934-16-5 3000 36 SAE 16 1.81˝ 5.00˝ 3 lbs. $33.959-7934-20-5 3000 50 SAE 20 2.41˝ 5.20˝ 7 lbs. $67.959-7934-24-5 3000 60 SAE 24 2.56˝ 5.20˝ 8 lbs. $56.9565 PSI Cracking9-7934-4-65 5000 6 SAE 4 0.87˝ 2.56˝ ½ lb. $11.959-7934-6-65 5000 10 SAE 6 0.94˝ 2.91˝ ½ lb. $14.959-7934-8-65 5000 18 SAE 8 1.18˝ 3.74˝ 1 lb. $16.959-7934-12-65 3000 30 SAE 12 1.50˝ 4.29˝ 2 lbs. $24.959-7934-16-65 3000 36 SAE 16 1.81˝ 5.00˝ 3 lbs. $33.959-7934-20-65 3000 50 SAE 20 2.41˝ 5.20˝ 7 lbs. $67.959-7934-24-65 3000 60 SAE 24 2.56˝ 5.20˝ 8 lbs. $56.95

DeltaRotaryDividers

• Brand new DELTA P Series. Hydraulicgear type rotary flow dividers to accuratelydivide flow from a single hydraulic sourceinto two equal circuits. Use for dividingflow to hydraulic circuits, motors and syn-chronizing cylinders. Inline relief valvesrecommended in both output lines be-tween divider and actuators.

ITEM 9-5120-10 $334.95SPECIFICATIONS• 50:50 divider • 2000 PSI intermittent• Displ. per section • 1500 PSI continuous0.00137 gal/rev • Max. differential 1000 PSI• Max. input 9.5 GPM • Size 6⅝˝ x 2¾˝ x 4¾˝• Ports ⅜˝ NPT • Shpg. 12 lbs.

ITEM 9-5120-21 $522.95SPECIFICATIONS• 50:50 divider • 2000 PSI intermittent• Displ. per section • 1500 PSI continuous0.00309 gal/rev • Max. differential 1000 PSI• Max. input 21 GPM • Size 5½˝ x 3½˝ x 4¾˝• IN ¾˝ NPT, OUT ½˝ NPT • Shpg. 18 lbs.

Flow ControlValvew/ Relief Valve

ITEM 9-9267$74.95• New, BRAND Model FCR51 pressurecompensated flow control valve. Speed re-main constant regardless of load. “Con-trolled flow” port is proportional to orificediam. that changes from full closed to fullopen. Pressure conpensated OUT flows.Three female threaded ports.SPECIFICATIONS• Pressure 3000 PSI • Relief valve preset 1500 PSI• Flow 0-16 GPM adj. 750-3000 PSI• Ports SAE 10 • Size 5¾˝ x 4½˝ x 215/16˝• Mount 2 hole 3⅞˝ ctrs. • Shpg. 11 lbs.

32 Hydraulic PTO & Vane Pumps www.surpluscenter.com8

PTO Pump Torque Bar KitITEM 9-6666 $42.95• Brand new PRINCE Model 180900877. Required for everyPrince PTO pump to keep pump body from rotating duringoperation. Kit includes one torque arm, two mounting boltsand one eyebolt/chain assembly. Shpg. 7 lbs.

High VolumeCast Iron

PTOPumps

• Brand new PRINCE. Hydraulic PTO gearpump. Ideal for adding hydraulic power totractors and landscape equipment not al-ready equipped with hydraulic circuits. Useto power hydraulic motors, front end load-ers, mowers, rotary sweepers, etc. Two self-adjusting wear plates. Roller bearings oninternally splined shaft. Center sectionavailable in high strength aluminum alloy forstandard duty cycle or high strength castiron for high duty cycle use. Rear ports withauxiliary side out port with plug. Includes a2˝ hosebarb adapter for inlet port, 1˝ NPTadapter for outlet port.SPECIFICATIONS• Displ. 9.9 cu. in. • RPM 1000 input max.• PSI 2250 max. • Aux. side out port SAE 12• Max output at 1000 RPM input40 GPM at 2000 PSI & 58.8 HP input• Max output at 540 RPM input21 GPM at 2000 PSI & 32.1 HP input• IN SAE 20 • OUT SAE 16• Fits onto 1⅜˝ 21T sp. shaft • Size 6⅜˝ x 6¾˝ x 9⅜˝

ITEM 9-5148-11 $556.95• Aluminum center. Shpg. 41 lbs.

ITEM 9-5148-11-C $583.95• Cast iron center. Shpg. 55 lbs.

PTO Drive Hydraulic Gear Pumps• Brand new PRINCE. Hydraulic PTO gear pump ideal for addinghydraulic power to tractors and landscape equipment not alreadyequipped with hydraulic circuits. Use to power hydraulic motors,front end loaders, mowers, rotary sweepers, etc. Two self-ad-justing wear plates. Roller bearings on internally splined shaft.Two outlet ports, one one each side for simple hookup. Includes1¼˝ hosebarb adapter for inlet port, ¾˝ NPT adapter for outletport and a steel plug for one outlet port. Requires the addition ofa restraining torque arm to prevent pump body rotation. SPECIFICATIONS For All Models• PSI 2250 • IN SAE 16 • OUT ports SAE 12

2000 PSI ITEM Model Displ. RPM Shaft GPM Input HP Shpg. Price

9-1047-7 * HC-PTO-7A 3.6 540 1⅜˝ 6T 7.1 11.9 37 lbs. $488.95 9-1047-2 * HC-PTO-2A 5.7 540 1⅜˝ 6T 11.4 18.1 37 lbs. $469.95 9-1047-9 HC-PTO-9A 7.8 540 1⅜˝ 6T 17.1 27.4 37 lbs. $508.95 9-1047-1 HC-PTO-1A 9.9 540 1⅜˝ 6T 21 32.1 44 lbs. $488.95 9-1047-8 * HC-PTO-8A 3.6 1000 1⅜˝ 21T 13.5 22.6 37 lbs. $468.95 9-1047-3 HC-PTO-3A 5.7 1000 1⅜˝ 21T 22.4 34.3 38 lbs. $469.95Cast Iron PTO Pumps * Inlet port adapter is 1˝

• Same as pumps above except with cast iron center section for increased wear resist-ance compared to aluminum centers and is recommended when the pump will be pow-ering a hydraulic motor. 2000 PSI ITEM Model Displ. RPM Shaft GPM Input HP Shpg. Price

9-1047-2-C * HC-PTO-2AC 5.7 540 1⅜˝ 6T 11.4 18.1 48 lbs. $509.95 9-1047-1-C HC-PTO-1AC 9.9 540 1⅜˝ 6T 21 32.1 58 lbs. $526.95 9-1047-8-C * HC-PTO-8AC 3.6 1000 1⅜˝ 21T 13.5 22.6 46 lbs. $506.95 9-1047-3-C HC-PTO-3AC 5.7 1000 1⅜˝ 21T 22.4 34.3 48 lbs. $506.95* Inlet port adapter is 1˝

CRS Vane Pumps• Brand new. Designed specifically for heavy duty industrial, agricultural and con-tractor applications. ‘‘No load’’ starting. Vanes are retracted until centrifugal forceautomatically extends them. Until they become extended no load is exerted onthe engine. Ball bearings give maximum shaft support with minimum friction.Pump can be belt and pulley driven. Ball bearings.

SPECIFICATIONS FOR ALL• Max. 1500 PSI• Min. 300 RPM• Max. 1800 RPM• Req’d starting 500 RPM

TB SeriesSPECIFICATIONS FOR TB SERIES • Shaft ¾˝ diam. x 2½˝ w/3/16˝ keyway • Two bolt A mount • Size 7¾˝ x 5¼˝ x 5¼˝ • Shpg. 13 lbs.

CW Rotation CCW Rotation at 1500 PSI PortsITEM ITEM Model RPM GPM HP IN OUT Price

9-1214-CW 9-1214-CCW TB-3 1800 3.80 6.45 ¾˝ NPT ½˝ NPT $384.959-1215-CW 9-1215-CCW TB-6 1800 9.06 11 ¾˝ NPT ½˝ NPT $384.959-1216-CW 9-1216-CCW TB-9 1800 14.35 15.81 1˝ NPT ¾˝ NPT $384.95932-CW 932-CCW TB-12 1800 17.10 19.35 1˝ NPT ¾˝ NPT $384.95

TC SeriesSPECIFICATIONS FOR TC SERIES • Shaft 1˝ diam. x 2½˝ w/ ¼˝ keyway • 6 hole flange mount • Size 8¾˝ x 6½˝ x 5½˝ • Shpg. 17 lbs.

CW Rotation CCW Rotation at 1500 PSI PortsITEM ITEM Model RPM GPM HP IN OUT Price

9-4102-CW 9-4102-CCW TC-16 1800 24.80 24.8 1¼˝ NPT 1˝ NPT $463.95990-CW 990-CCW TC-20 1800 31.00 29.70 1¼˝ NPT 1˝ NPT $463.95

9-1217-CW 9-1217-CCW TC-24 1500 32.55 30.75 1¼˝ NPT 1˝ NPT $463.95

TB Series TC Series

Foot Mounts

ITEM 990-A - TC Series $39.95ITEM 933 - TB Series $39.95• Adapts pumps for belt and pulley or chaindrive. Size 6¾˝ x 5½˝ x 4¼˝. Shpg. 1½ lbs.

800-488-3407 Hydraulic Two Stage & Vane Pumps 33&

22 GPM, 2 StageHyd.

Pump

ITEM 9-7973 $341.99• Brand new, MTE HYDRAULICS two stageHI/LO pressure hydraulic gear pump. Idealfor applications such as log splitters,presses and other equipment where rapidmovement of the cylinder at low pressure isrequired prior to automatically switching tothe high pressure mode to meet load re-quirements. The change from LO to HIpressure is automatic with the LO stagepressure preset at 500 PSI. Minimum of 12HP required for gas engine use.SPECIFICATIONS• Displacement0.408 cu. in. / rev. HI press. stage1.384 cu. in. / rev. LO press. stage• Pump type gear• Rotation CW • Mount 2 bolt SAE A• Pressure 3000 PSI max. • Shaft ⅝˝ dia. x 1½˝ keyed• Speed 3600 RPM max. • Rqd. filtration 25 micron• Flow • Inlet port 1¼˝ hosebarb6.3 GPM HI press. stage • Outlet port ¾˝ NPT22 GPM LO press. stage • Size 6¼˝ x 6¼˝ x 4⅝˝• Unloading press. 500 PSI • Shpg. 22 lbs.

ITEM 9-7970 $219.95SPECIFICATIONS• Displacement0.465 cu. in. HI press. stage; 1.395 cu. in. LO press. stage• Pump type gear• Rotation CW • Shaft ⅝˝ dia. x 1½˝• Pressure 3000 PSI max. with keyway• Speed 3600 RPM max. • Rqd. filtration 25 micron• Flow • Inlet port 1˝ NPT7 GPM HI press. stage • Outlet port ¾˝ NPT22 GPM LO press. stage • Minimum of 12 HP req.• Unloading pressure for gas engine use400-900 PSI • Size 69/16˝ x 6¼˝ x 311/16˝• Mount 2 bolt SAE A • Shpg. 22 lbs.

MTE 2 Stage Hydraulic Pumps• Brand new, MTE HYDRAULICS two stage HI/LO pressure hydraulicgear pump. Ideal for applications such as log splitters, presses andother equipment where rapid movement of the cylinder at low pressureis required prior to automatically switching to the high pressure modeto meet load requirements. The change from LO to HI pressure is auto-matic with the LO stage pressure preset at 700 PSI.

SPECIFICATIONS • Rotation CW • Speed 3800 RPM max. • Rqd. filtration 25 micron• Pump type gear • Pressure 3000 PSI max. • Shaft ½˝ dia. x 1½˝ long keyed • Mount 4 bolt USA 4F17

Flow (GPM) Displ. (cu. in.) Unloading Engine PowerITEM LO Stage HI Stage LO Stage HI Stage Pressure Inlet Outlet Required Size Shpg. Price

9-7972-7 7 1.8 0.433 0.110 500 PSI ¾˝ NPT ½˝ NPT 4 HP 57/16˝ x 3˝ x 311/16˝ 10 lbs. $129.999-7972-11 11 1.8 0.709 0.110 700 PSI 1˝ Hosebarb ½˝ NPT 5 HP 6˝ x 4˝ x 311/16˝ 10 lbs. $129.999-7972-13 13 3 0.839 0.192 500 PSI 1˝ Hosebarb ½˝ NPT 6.5 HP 6¼˝ x 4˝ x 311/16˝ 12 lbs. $139.999-7972-16 16 3 0.994 0.192 500 PSI 1˝ Hosebarb ½˝ NPT 8 HP 69/16˝ x 4˝ x 311/16˝ 12 lbs. $149.99

Dynamic Two Stage Hydraulic Pumps• Brand new DYNAMIC, two stage HI/LO pressure hydraulic gear pumps. Ideal for applications suchas log splitters, presses and other equipment where rapid movement of the cylinder at low pressureis required prior to automatically switching to the high pressure mode to meet load requirements.SPECIFICATIONS FOR ALL• Pump type gear • Speed 3600 RPM max. • Rqd. filtration 25 micron• Rotation CW • Unloader adj. range 400-900 PSI • Shaft ½˝ dia. x 1½˝ keyed• Press. 3000 PSI max. • Overhung shaft load up to 90 lbs. • Mount 4 bolt USA 4F17

Flow (GPM) Displ. (cu. in.) Engine PowerITEM LO Stage HI Stage LO Stage HI Stage Inlet Outlet Required Size Shpg. Price

9-7503-8 8 2 0.515 0.130 1˝ Hosebarb ½˝ NPT 5 HP 4¾˝ x 5⅛˝ x 3⅜˝ 10 lbs. $144.959-7503-9 8.1 2.7 0.567 0.183 1˝ Hosebarb ½˝ NPT 5 HP 4¾˝ x 4¾˝ x 3⅜˝ 10 lbs. $133.959-7503-11 11 3.4 0.757 0.220 1˝ Hosebarb ½˝ NPT 5 HP 5⅛˝ x 5⅛˝ x 3⅜˝ 10 lbs. $129.959-7503-13 13 3.4 0.885 0.220 1˝ Hosebarb ½˝ NPT 6.5 HP 5⅜˝ x 5⅛˝ x 3⅜˝ 11 lbs. $136.959-7503-16 16 4 1.049 0.256 1˝ Hosebarb ½˝ NPT 8 HP 5¾˝ x 5⅛˝ x 3⅜˝ 12 lbs. $139.95

Vickers Vane Pumps• Brand new VICKERS Series V20. Used in a wide variety of equipment.Cast iron “balanced vane type” construction can be field reversed.SPECIFICATIONS FOR ALL• Min. speed 600 RPM • Shaft ¾˝ diam. x 2½˝ w/keyway• CW rotation • Two bolt SAE A mounting flange• IN 1¼˝ NPT • OUT ¾˝ NPT • Shpg. 18 lbs.

GPM at Max.ITEM Model 1200 RPM RPM PSI Price

9-1796-D V201P6 6 GPM 3400 2500 $575.959-1796-A V201P8 8 GPM 2800 2500 $575.959-1796-B V201P11 11 GPM 2500 2500 $575.959-1796-C V201P13 13 GPM 2400 2200 $575.95

2 Stage Hydraulic Pumps• Brand new, DYNAMIC two stage HI/LO pressurehydraulic gear pump. Ideal for applications such aslog splitters, presses and other equipment whererapid movement of the cylinder at low pressure is re-quired prior to automatically switching to the highpressure mode to meet load requirements. Thechange from LO to HI pressure is automatic with theLO stage pressure preset from 400-900 PSI.

ITEM 9-7971 $229.95SPECIFICATIONS• Displacement0.465 cu. in. HI press. stage; 1.860 cu. in. LO press. stage• Pump type gear• Rotation CW • Shaft ⅝˝ dia. x 1½˝• Pressure 3000 PSI max. with keyway• Speed 3600 RPM max. • Rqd. filtration 25 micron• Flow • Inlet port 1˝ NPT7 GPM HI press. stage • Outlet port ¾˝ NPT28 GPM LO press. stage • Minimum of 16 HP req.• Unloading pressure for gas engine use400-900 PSI • Size 69/16˝ x 6¼˝ x 4⅝˝• Mount 2 bolt SAE A • Shpg. 23 lbs.

9-7972-11, 9-7972-139-7972-16

9-7972-7


34 Hydraulic Gear Pumps www.surpluscenter.com8

Dynamic Gear Pumps

GP-F10 Series• Brand new DYNAMIC GP-F10 hydraulic gear pumps. Aluminum housing.SPECIFICATIONS FOR GP-F10 SERIES• Mount SAE AA 2 bolt • Ports SAE 8 inlet, SAE 6 outlet • Shaft ½˝ diam. x 11/16˝ with ⅛˝ keyway

Seal Kit: ITEM 70700 Shpg. ¼ lb. $32.95

Choose pump suffix key for rotation. Rotation Suffix Key: -B CW -D CCW

PSI RPM GPMITEM Displ. Rated Peak Rated Max. Rated Max. Size Shpg. Price

9-7762 0.07 3190 3770 2000 6000 0.56 1.69 3¼˝ x 41/32˝ x 35/16˝ 4 lbs. $82.959-7763 0.12 3190 3770 2000 6000 0.97 2.90 35/16˝ x 41/32˝ x 35/16˝ 5 lbs. $82.959-7764 0.16 3190 3770 2000 5000 1.29 3.22 3⅜˝ x 41/32˝ x 35/16˝ 5 lbs. $82.959-7765 0.20 3190 3770 2000 5000 1.61 4.03 3½˝ x 41/32˝ x 35/16˝ 5 lbs. $82.959-7766 0.25 3045 3625 2000 5000 2.01 5.03 39/16˝ x 41/32˝ x 35/16˝ 6 lbs. $89.959-7767 0.31 3045 3625 2000 4000 2.50 4.99 311/16˝ x 41/32˝ x 35/16˝ 6 lbs. $89.959-7768 0.37 2900 3480 2000 4000 2.98 5.96 313/16˝ x 41/32˝ x 35/16˝ 6 lbs. $89.959-7769 0.49 2900 3480 2000 4000 3.95 7.89 4˝ x 41/32˝ x 35/16˝ 7 lbs. $89.959-7770 0.55 2610 3190 2000 3000 4.43 6.64 413/16˝ x 41/32˝ x 35/16˝ 8 lbs. $89.959-7771 0.66 2610 3190 2000 3000 5.31 7.97 5˝ x 41/32˝ x 35/16˝ 9 lbs. $89.959-7772 0.82 2610 3190 2000 3000 6.60 9.90 55/16˝ x 41/32˝ x 35/16˝ 10 lbs. $89.95

GP-F20 Series• Brand new, DYNAMIC GP-F20 hydraulic gear pumps. Aluminum housing.SPECIFICATIONS FOR GP-F20 SERIES• Mount: SAE A 2 bolt• Ports: SAE 12 inlet, SAE 10 outlet, except ITEMS 9-7795 & 9-7796 which have SAE 16 inlet, SAE 12 outlet

Seal Kit: ITEM 70300 Shpg. ¼ lb. $34.95Pumps available in shaft sizes of ⅝˝ diam. x 1¼˝ 9T spline or

⅝˝ diam. x 1¼˝ with 5/32˝ wide keyway

Choose pump suffix key for shaft type and rotation. -A CW Splined -B CW Keyed -C CCW Splined -D CCW Keyed

PSI RPM GPMITEM Displ. Peak Rated Max. Rated Max. Size Shpg. Price

9-7786 0.24 3650 2000 3600 1.93 3.48 3¾˝ x 5⅛˝ x 4½˝ 10 lbs. $ 95.959-7787 0.36 3650 2000 3600 2.90 5.22 3⅞˝ x 5⅛˝ x 4½˝ 10 lbs. $ 95.959-7788 0.48 3650 2000 3600 3.87 6.96 4˝ x 5⅛˝ x 4½˝ 10 lbs. $ 95.959-7789 0.61 3650 2000 3600 4.91 8.84 4⅛˝ x 5⅛˝ x 4½˝ 10 lbs. $ 95.959-7790 0.73 3650 2000 3600 5.88 10.58 4¼˝ x 5⅛˝ x 4½˝ 11 lbs. $ 95.959-7791 0.85 3650 2000 3600 6.84 12.32 4⅜˝ x 5⅛˝ x 4½˝ 11 lbs. $100.959-7792 0.97 2900 2000 3600 7.81 14.06 4½˝ x 5⅛˝ x 4½˝ 11 lbs. $102.959-7793 1.22 2900 2000 3600 9.82 17.68 4¾˝ x 5⅛˝ x 4½˝ 11 lbs. $103.959-7794 1.52 2900 2000 3600 12.24 22.03 51/16˝ x 5⅛˝ x 4½˝ 12 lbs. $103.959-7795 1.83 2300 2000 3600 14.74 26.52 5⅜˝ x 5⅛˝ x 4½˝ 12 lbs. $103.959-7796 1.95 2300 2000 3600 15.70 28.26 5¾˝ x 5⅛˝ x 4½˝ 12 lbs. $103.95

Displ. Max. GPM ITEM cu. in. RPM 1500 RPM Max. Rotation Shaft Shpg. Price

9-4848-A 0.98 3000 5.7 11.9 CW ⅝˝ 9 T spline 16 lbs. $105.999-4848-C 0.98 3000 5.7 11.9 CCW ⅝˝ 9 T spline 16 lbs. $105.999-4848-E 0.98 3000 5.7 11.9 CW ¾˝ 11 T spline 16 lbs. $105.999-4848-G 0.98 3000 5.7 11.9 CCW ¾˝ 11 T spline 16 lbs. $105.999-4849-A 1.22 3000 7.1 15 CW ⅝˝ 9 T spline 17 lbs. $112.999-4849-C 1.22 3000 7.1 15 CCW ⅝˝ 9 T spline 17 lbs. $112.999-4849-E 1.22 3000 7.1 15 CW ¾˝ 11 T spline 17 lbs. $112.999-4849-G 1.22 3000 7.1 15 CCW ¾˝ 11 T spline 17 lbs. $112.999-4850-A 1.53 3000 8.9 18.5 CW ⅝˝ 9 T spline 19 lbs. $119.99

Hydreco Gear Pumps• New. Aluminum gear pumps. Wide selection of performance and mounting options.

SPECIFICATIONS• 3625 PSI max. • 2900 PSI working• Ports IN SAE 16, OUT SAE 10 • 2 bolt SAE A mount• Teflon lined bushings • Size 5⅛˝ x 7½˝ x 5¼˝

800-488-3407 Prince Hydraulic Gear Pumps 35&

Prince SP20 Gear Pumps• Available in CW or CCW rotation with either ⅝˝ diam. x 1¼˝ keyed shaft or⅝˝-9 tooth splined shaft. Your choice of side or rear porting. Two bolt SAE Amounting flange with 3¼˝ pilot diam.

Prince SP20 Pump Seal Kit ITEM PMCK-SP20 Shpg. ¼ lb. $26.95

Pump suffix key: -A CW splined -B CW keyed -C CCW splined -D CCW keyed Add -R for rear ported modelsState your suffix letter. Example: 9-1899-C-R is 1.22 cu. in. displ. with CCW rotation, ⅝-9 tooth shaft, rear ports.

GPM @ Max. Max. Inlet Port Outlet Port ITEM Displ. 2000 RPM PSI RPM Side Rear Side Rear Shpg. Price 9-1895 0.499 4.04 3000 4000 SAE 12 SAE 16 SAE 10 SAE 12 8 lbs. $190.95 9-1896 0.589 4.75 3000 4000 SAE 12 SAE 16 SAE 10 SAE 12 8 lbs. $190.95 9-1897 0.677 5.63 3000 4000 SAE 12 SAE 16 SAE 10 SAE 12 8 lbs. $190.95 9-1898 0.86 7.01 3000 4000 SAE 12 SAE 16 SAE 10 SAE 12 9 lbs. $192.95 9-1788 0.976 7.93 3000 4000 SAE 12 SAE 16 SAE 10 SAE 12 9 lbs. $192.95 9-1899 1.22 10.05 3000 3500 SAE 16 SAE 16 SAE 12 SAE 12 9 lbs. $204.95 9-1900 1.403 11.6 2500 3500 SAE 16 SAE 16 SAE 12 SAE 12 9 lbs. $206.95 9-1901 1.654 13.9 2500 3500 SAE 16 SAE 16 SAE 12 SAE 12 10 lbs. $209.95Rear ported models should not exceed 21 GPM output due to port size.

Prince SP25 Gear Pumps• Available in CW or CCW rotation with either ⅞˝ diam. x 1⅝˝ keyed shaft or⅞˝-13 tooth splined shaft. Your choice of side or rear porting. Two bolt SAE Bmounting flange with 4˝ pilot diam.

Prince SP25 Pump Seal Kit ITEM PMCK-SP25 Shpg. ¼ lb. $28.95

Pump suffix key: -A CW splined -B CW keyed -C CCW splined -D CCW keyed Add -R for rear ported modelsState your suffix letter. Example: 9-7129-C-R is 2.32 cu. in. displ. with CCW rotation, ⅞-13 tooth shaft, rear ports.

GPM @ Max. Max. Inlet Port Outlet Port ITEM Displ. 2000 RPM PSI RPM Side Rear Side Rear Shpg. Price 9-7125 1.141 9.39 3000 3000 SAE 16 SAE 16 SAE 12 SAE 12 12 lbs. $284.95 9-7126 1.349 11.08 3000 3000 SAE 16 SAE 16 SAE 12 SAE 12 12 lbs. $285.95 9-7127 1.66 13.7 3000 3000 SAE 16 SAE 16 SAE 12 SAE 12 13 lbs. $293.95 9-7128 2.008 16.73 3000 3000 SAE 20 SAE 16 SAE 16 SAE 12 15 lbs. $295.95 9-7129 2.318 19.08 3000 3000 SAE 20 SAE 16 SAE 16 SAE 12 16 lbs. $302.95 9-7130 2.697 22.16 3000 3000 SAE 20 SAE 16 SAE 16 SAE 12 16 lbs. $310.95 9-7131 3.179 26.42 2500 3000 SAE 20 SAE 16 SAE 16 SAE 12 17 lbs. $312.95 9-7132 3.869 31.93 2500 3000 SAE 24 SAE 16 SAE 16 SAE 12 18 lbs. $319.95Rear ported models should not exceed 25 GPM output due to port size.

Completed Double Pump9-5006-D with 9-1901-C

Item Numbers forPrince SPD

Front Pumps

ITEM Displ. Price

9-5006 1.141 $366.95 9-5007 1.349 $368.95 9-5008 1.66 $374.95 9-5009 2.008 $377.95 9-5010 2.318 $383.95 9-5011 2.697 $390.95 9-5012 3.179 $398.95 9-5013 3.869 $409.95

Prince SP20 and SP25 Gear Pumps• Brand new, aluminum body hydraulic gear pumps made by Prince Mfg. Hardened steel gears and shafts. PTFE composite bearings areself lubricating and handle heavy loads, low shaft speeds. Non-symmetrical gears for low noise, less pulsation.

Build Your Own Prince Double Pump

• Brand new PRINCE. Build your own double pump by purchasing a SPD pump (special version ofthe SP25 with a rear pump mount) and then adding a SP20 as the rear pump. SPD pumps (frontsection) are only available with side ports, SP20 pumps (rear section) can have either side or rearports. See the chart at left for SPD item numbers and refer to the SP25 chart above for performanceinformation.

Pump suffix keys are the same as SP25. Note that the SP20 pump chosen for the second sectionmust be a spline shaft version in the same rotation as the front pump.

Example: Requirement is for a CCW rotation double pump with splined shaft and displacements of2.697 cu. in. for the front section and 1.22 cu. in. for the rear section. Both sections to have sideports. Purchase a 9-5011-C for the front and 9-1899-C for the rear.

0.194 cu. in.Pump

ITEM 9-4199$137.95• Brand new BARNES Model 070411.Compact cast iron gear pump.SPECIFICATIONS• Displ. 0.194 cu. in. • Mount 4F17• PSI 3000 • Shaft ½˝ diam. x 1½˝• RPM 4000 max. • IN/OUT SAE 8• 3 GPM at 3600 RPM • Size 3¼˝ x 3˝ x 3¼˝• Rotation CW • Shpg. 6 lbs.

Hydraulic Gear Pumpw/ IntegralValve

ITEM 9-9881$139.95• New FENNER. Hydraulic gear pump withbuilt-in single spool, open center, springcentered, control valve ideal for operatingdouble acting cylinders. Cast iron housing.SPECIFICATIONS• Displ. 0.1 cu. in. / rev. • Mount 4 bolt USA 4F17• Rotation CCW • Shaft ⅝˝ dia. x 1½˝ keyed• Pressure 3500 PSI cont. • Inlet port SAE 8• Flow 1.6 GPM cont. • Work ports SAE 6• Speed 3450 RPM cont. • Tank port SAE 6• Relief valve setting • Size 6⅜˝ x 4˝ x 4˝3200 PSI • Shpg. 12 lbs.

DynamicTang Drive

Pumps• New, DYNAMIC hy-

draulic gear pumps. Allaluminum construction. O-ring

around the shaft pilot. Two 0.34˝ diametermounting holes through the pump body.SPECIFICATIONS FOR BOTH• Pump type gear • Shaft 5 mm thick tang• Rotation CCW • Rqd. filtration 25 micron• PSI 2900 cont., 3626 peak• Inlet port ⅜˝ NPT rear• RPM 2000 cont., 6000 peak• Outlet port 9 mm I.D. in face• Mnt. 2 bolts on 40 mm sq. • Case drain nonew/1.26˝ diam. pilot • Shpg. 3 lbs.

ITEM 9-7797 $49.99SPECIFICATIONS• Model GP-F1-11-T-A • GPM 0.48 cont., 1.45 peak• Disp. 0.06 cu. in./rev. • Size 3¼˝ x 2¾˝ x 213/16˝

ITEM 9-7798 $49.99SPECIFICATIONS• Model GP-F1-21-T-A • GPM 0.97 cont., 2.89 peak• Disp. 0.12 cu. in./rev. • Size 35/16˝ x 2¾˝ x 213/16˝

36 Cessna Hydraulic Gear Pumps www.surpluscenter.com8

Cessna 25500 Gear Pumps

• Brand new CESSNA 25500. Ideal replacementpump on many tractors, backhoes, loaders andother mobile equipment.SPECIFICATIONS• 3000 PSI max. • Side ports• SAE B 2 bolt mount • IN SAE 20, OUT SAE 12

Pumps available in shaft sizes of⅞˝ diam. x 1⅝˝ 13T spline or⅞˝ diam. x 1⅝˝ with keyway

Choose pump suffix key for shaft type and rotation. -A CW Splined -B CW Keyed -C CCW Splined -D CCW Keyed

Displ. RPM GPM at 2500 PSI ITEM cu. in. Rated Max. Rated Max. Shpg. Price9-4063 1.30 1800 3500 9.7 17.9 12 lbs. $401.959-4064 1.55 1800 3000 10.9 18.3 13 lbs. $413.959-4065 1.78 1800 3000 12.5 21.3 14 lbs. $423.959-4066 2.05 1800 2750 14.4 22.5 15 lbs. $426.959-4067 2.33 1800 2750 16.3 25.5 16 lbs. $430.959-4068 2.61 1800 2500 18.3 26.0 17 lbs. $436.959-4069 2.85 1800 2500 20.0 28.4 18 lbs. $443.959-4070 3.12 1800 2500 21.9 31.1 19 lbs. $443.959-4071 3.37 1800 2250 23.6 30.2 20 lbs. $443.95

Cessna 26000 Gear Pumps• Brand new CESSNA Model 26000. Replaces Cessna26300 Series. Hydraulic gear pump. Ideal for replacementon mobile equipment and other hydraulic systems. 3000 PSImax. SAE A 2 bolt mount. Side ports, IN SAE 16, OUT SAE10. Shaft ¾˝ diam. x 1¼˝ w/keyway. Available in choice of ro-tations.

Choose pump suffix key for shaft type and rotation.

-B CW Keyed -D CCW Keyed

Displ. RPM GPM at 2500 PSI ITEM cu. in. Rated Max. Rated Max. Shpg. Price9-4435 0.50 1800 3600 3.9 7.8 7 lbs. $210.959-4436 0.66 1800 3600 5.2 10.3 7 lbs. $210.959-4437 0.84 1800 3600 6.5 13.3 7 lbs. $215.959-4438 1.02 1800 3200 7.9 14.4 7 lbs. $216.959-4439 1.20 1800 3200 9.4 16.3 7 lbs. $259.959-4440 1.37 1800 3000 10.7 17.5 7 lbs. $232.959-4441 1.54 1800 3000 12.0 20.0 7 lbs. $242.959-4442 1.69 1800 3000 13.2 22.0 7 lbs. $253.959-4443 1.87 1800 3000 14.6 24.1 7 lbs. $289.95

Splined

Keyed

Hydraulic Pump/Motor• Brand new, compact PARKER MGG200 Series. Use as hy -drau lic pump or motor for agricultural, commercial applications.• Gerotor design with heavy duty bearings, aluminum case, re-versible, Buna-N seals, 9/16˝ diam. shaft. 1000 PSI back pressurein series. Max. 3500 RPM as pump, 5000 RPM as motor. Over-all 5½˝ x 3½˝ x 3⅜˝. Shpg. 5 lbs. 2 Bolt 2 Bolt 4 Bolt Displ. GPM PSI TorqueRear Ports Side Ports Side Ports cu. in. per 1000 RPM Cont. Int. in. lbs. Ports Price 9-1180 9-6590 9-4765 0.218 0.95 2000 2500 35 SAE 8 $158.95 9-1181 9-6591 9-4766 0.372 1.61 2000 2500 59 SAE 8 $164.95 9-1182 9-6592 9-4767 0.45 1.95 2000 2500 72 SAE 8 $169.95 9-1183 9-6593 9-4768 0.58 2.51 2000 2500 92 SAE 10 $174.95 9-1184 9-6594 9-4769 0.70 3.03 1500 2000 111 SAE 10 $179.95

0.129 cu. in.HydraulicGear PumpITEM 9-10032$74.95• New HALDEX Model 060404 hydraulicgear pump. Cast iron housing.SPECIFICATIONS• Disp. 0.129 cu. in. / rev. • Mount 2 bolt SAE AA• Pump Type Gear • Shaft ½˝ dia. x 1½˝ keyed• Rotation CCW • Inlet port SAE 8• PSI 3000 cont., 4000 int. • Outlet port SAE 6• RPM 3600 cont., 4000 int. • Size 35/16˝ x 4˝ x 33/16˝• GPM 2.0 cont., 2.2 int. • Shpg. 8 lbs.

0.66 cu. in.GearPumps

• New EATON. Hydraulic gear pump. Idealfor replacement on mobile equipment andother hydraulic systems.

ITEM 9-7030 $109.99SPECIFICATIONS• Model 26004-RAK • Side ports• Displ. 0.66 cu. in. IN SAE 12, OUT SAE 10• PSI 3000 max. • Shaft ⅝˝ x 1¼˝ long• RPM 3600 max. 9 tooth spline• 10.3 GPM at 3600 RPM • CW rotation• 5.2 GPM at 1800 RPM • Size 3⅞˝ x 5⅛˝ x 5¼˝• Mount SAE A 2 bolt • Shpg. 7 lbs.

ITEM 9-7030-A $109.99SPECIFICATIONS• Model 26004-LAD • Side ports• Displ. 0.66 cu. in. IN SAE 16, OUT SAE 10• PSI 3000 max. • Shaft ⅝˝ x 1¼˝ long• RPM 3600 max. 9 tooth spline• 10.3 GPM at 3600 RPM • CCW rotation• 5.2 GPM at 1800 RPM • Size 3⅞˝ x 5⅛˝ x 5¼˝• Mount SAE A 2 bolt • Shpg. 7 lbs.

0.66 cu. in.GearPumpITEM 9-4886$79.95• New CESSNA 25301 LAG.SPECIFICATIONS • Rotation CCW• Displ. 0.66 cu. in. • IN SAE 16, OUT SAE 10• 3600 RPM max. • Shaft ⅝˝ x 1⅝˝ tapered• 3000 PSI max. w/keyway & threaded end• 5.5 GPM at 2000 RPM • Size 4˝ x 5˝ x 5˝• 2 bolt SAE A mount • Shpg. 6 lbs.

800-488-3407 Hydraulic Gear Pumps 37&

1.24 cu. in.PriorityPump

ITEM 9-5055$169.95• New CESSNA 24336RAF. Hydraulic gearpump with built in priority divider. Ideal forusing priority flow for steering circuits withthe excess flow to power main hydrauliccircuit. Mount is 2 bolt, 3½˝ pilot, 4⅛˝ B.C.Additional flange holes for mounting. Inter-national Harvester Part #631143R92.SPECIFICATIONS• 1.24 cu. in. • Rotation CW• 2000 PSI continuous • Shaft 11/16˝ diam. tapered• 2500 PSI intermittent w/⅜˝-16 threaded end• 2500 RPM max. • IN SAE 12, OUT SAE 10• 6 GPM at 1800 RPM • Priority port SAE 6main flow • Shpg. 8 lbs.

Eaton/Cessna1.02 GearPumpITEM 9-6371$129.99• New EATON Model 26006-LAS. Taperedshaft.SPECIFICATIONS • Rotation CCW• Displ. 1.02 cu. in. • Ports rear• PSI 3000 max. IN SAE 16, OUT SAE 10• RPM 3200 max. • Mount SAE A 2 bolt• Rated GPM at 2500 PSI • Shaft 11/16˝ tapered14.4 at max. RPM w/threaded end7.9 at 1800 RPM • Shpg. 7 lbs.

Sundstrand PowerSteeringPumps

• New SUNSTRAND. Hydraulic gear pumpwith built in priority flow divider. Ideal forpower steering circuits that require a con-stant flow with the balance of flow avail-able to operate the main hydraulics.• Pumps are designed to deliver a priorityflow of 3.3 GPM at 1450 PSI for the steer-ing circuit. Auxiliary flow at 1800 RPM, forthe main circuit.SPECIFICATIONS FOR BOTH• PSI 2900 max. • Inlet port SAE 12• Priority flow 3.3 GPM, • Priority output port SAE 61450 PSI at • Aux. output port SAE 8700-1800 RPM • Size 6⅞˝ x 5⅛˝ x 4¾˝• SAE A 2 bolt mount • Shpg. 13 lbs.

ITEM 9-2026-D $149.50SPECIFICATIONS• Displ. 1.2 cu. in. • CCW rotation• 6 GPM auxiliary flow • Shaft ⅝˝ dia. keyed

ITEM 9-2027-A $169.50SPECIFICATIONS• Displ. 1.5 cu. in. • CW rotation• 8.3 GPM auxiliary flow • Shaft ⅝˝-9 tooth spline

Hydraulic Clutch Pumps• Brand new. Hyd raulic pump driven by 12 volt DC clutch.For use in marine, agricultural and industrial use. Use forremote hydraulics in service trucks, boats, trucks with au-tomatic transmissions, farm tractors, snowplows, etc.SPECIFICATIONS FOR ALL• 12 VDC operation • 3000 RPM max.• CW rotation • Rear ports • Cast iron foot mount

Two Styles AvailableV-Belt: Serpentine:

7˝ diam. 2 belt ½˝ A type v-belt clutch 6˝ diam., 6 groove serpentine clutch

V-Belt Serpentine GPM atITEM # ITEM # 2000 RPM Displ. PSI IN OUT Shpg. Price9-1737 9-1737-S 12 GPM 1.45 cu. in. 3000 SAE 16 SAE 12 32 lbs. $579.959-1738 9-1738-S 20 GPM 2.32 cu. in. 2200 SAE 16 SAE 12 33 lbs. $602.95

Replacement Pumps• Replacement pump only. Shpg. 16 lbs.

ITEM 9-1737-P $405.95ITEM 9-1738-P $399.50

Replacement Clutches• Replacement clutch only.

ITEM 1-2184 $130.95• V-belt clutch. Shpg. 12 lbs.

ITEM 1-2184-S $199.50• Serpentine clutch. Shpg. 10 lbs.

0.84 cu. in.HydraulicGear PumpITEM 9-10065$119.95• New EATON Model 25302LAH hydraulicgear pump. Aluminum housing.SPECIFICATIONS• Disp. 0.84 cu. in. / rev. • Pump Type Gear • Shaft ⅝˝ diam. x 1¼˝• Rotation CCW 9 tooth spline• PSI 3000 cont., 3500 int. • Inlet port SAE 16• RPM 3600 cont. • Outlet port SAE 10• GPM 12.8 cont. • Size 4¼˝ x 5¼˝ x 5¼˝• Mount 2 bolt SAE A • Shpg. 8 lbs.

0.25 cu. in.Hyd. GearPumpITEM 9-10030$99.95• New FENNER Model 1AD6STN hydraulicgear pump. Aluminum housing.SPECIFICATIONS • Mount 4 bolt USA 4F17• Disp. 0.25 cu. in. / rev. • Shaft ½˝ diam. x 17/16˝• Pump Type Gear keyed• Rotation CW • Inlet port SAE 8• PSI 3000 cont. • Outlet port SAE 6• RPM 4000 cont. • Size 4¼˝ x 2⅞˝ x 2⅞˝• GPM 4.3 cont. • Shpg. 6 lbs.


1.07 cu. in.HydraulicPumpITEM 9-10051$104.95• New FENNER Model 2S25AAC hydraulicgear pump. Aluminum housing.SPECIFICATIONS • Mount 2 bolt SAE A• Disp. 1.07 cu. in. / rev. • Shaft ⅝˝ diam. x 1˝ keyed• Pump Type Gear • Inlet port SAE 12• Rotation CCW • Outlet port SAE 10• PSI 2750 cont., 3200 int. • Case drain N/A• RPM 1750 cont., 3500 int. • Size 4¾˝ x 5¼˝ x 4¼˝• GPM 8.09 cont. • Shpg. 9 lbs.

2.5 cu. in.GearPump

ITEM 9-2149-A$129.00• New GW Model 0082-1500 aluminumhousing gear pumps.SPECIFICATIONS• Disp. 2.5 cu. in. / rev. • Mount 2 bolt SAE B• Pump type gear • Shaft ¾˝ x 1½˝ keyed• Rotation CCW • Inlet port 1¼˝ NPT• PSI 3000 cont. • Outlet port 1˝ NPT• RPM 1200 cont., 2400 int. • Size 6˝ x 6⅞˝ x 6˝• GPM 13 cont. • Shpg. 15 lbs.

3.44 cu. in.Pump

ITEM 9-5287 $299.95• New COMMERCIAL SHEARINGP30A294BEUH17-SP. High tensile castiron constructed with pressure balancedthrust plates.SPECIFICATIONS • Rotation CCW• Displ. 3.44 cu. in. • Mount SAE A 2 bolt• PSI 2250 cont. • Shaft ¾˝ 11 tooth• PSI 2500 int. • IN 1¼˝ 4 bolt flange• RPM 2400 max. • OUT ¾˝ 4 bolt flange• 25 GPM at 1800 RPM • Size 7¼˝ x 5¼˝ x 5¼˝• 34 GPM at 2400 RPM max.• Shpg. 36 lbs.

38 Hydraulic Gear Pumps www.surpluscenter.com8

2.32 cu. in.GearPump

ITEM 9-6782$179.99• New DANFOSS Series “D” cast iron gearpump. Very compact size with good flowrate makes it an ideal replacement pumpon many tractors, backhoes, loaders andother mobile equipment.SPECIFICATIONS• Displ. 2.32 cu. in. • Mount SAE A 2 bolt• PSI 3300 max. • Side ports• RPM 600-2750 IN SAE 16, OUT SAE 12• Rated GPM at 3000 PSI: • Shaft ⅞˝ 13 T spline25.5 at max RPM • Rotation CCW16.3 at 1800 RPM • Shpg. 16 lbs.

2.32 cu inHydraulicGearPumpITEM 9-7441$179.99• New, Sundstrand model SNP3/ 38SSC -07/8L. Aluminum body gear pump.SPECIFICATIONS • Mount SAE B 2 bolt• Disp. 2.32 cu.-in. / rev. • Shaft ⅞˝ 13 T spline x 1¼˝• PSI 3625 cont., 3910 int. • In port 1¼˝ 4 bolt flange• Speed 3000 RPM max. • Out port 1˝ 4 bolt flange• 30 GPM at 3000 RPM • Size 5⅝˝ x 6¾˝ x 6⅛˝• Rotation CCW • Shpg. 18 lbs.

Dowty High Volume Gear Pumps

• New DOWTY. Aluminum housing.Pressure balanced bushings. Field reversible.

SPECIFICATIONS FOR ALL• Shaft 1¼˝ 14 T spline • Split flange ports IN 1½˝, OUT 1¼˝ • ITEM 9-2069-A OUT port is 1˝

CW Rotation CCW Rotation Cu. In. Max. Max. Flow At SAE ITEM Model ITEM Model Displ. PSI RPM 1800 RPM Max. RPM Shaft Mount Shpg. Price

9-2069-A 3P3250-CSSSB 9-2070-A 3P3250-ASSSB 4.7 2525 2500 36 Gal. 50 GPM 14 tooth C 2 bolt 31 lbs. $229.00 9-2069-O 3P4330-CSCSB 9-2070-O 3P4330-ASCSB 6.2 2800 2100 48 Gal. 56 GPM 14 tooth C 4 bolt 35 lbs. $289.00 9-2069-R 3P4380-CSCSB 9-2070-R 3P4380-ASCSB 7.1 2500 2000 55 Gal. 61 GPM 14 tooth C 4 bolt 34 lbs. $329.00

3.187 Displ.Pump

ITEM 9-5154 $379.95• New. Heavy duty cast iron construction.High pressure output.SPECIFICATIONS• Displ. 3.187 • Mount SAE C 4 bolt• PSI 3500 cont. • Shaft 1˝ 15 T spline• RPM 2400 max. cont. • IN 2˝ flange w/metric mnt.• 28.5 GPM at 1800 RPM • OUT SAE 16 O-ring• 37 GPM at 2400 RPM max.• Size 8⅜˝ x 7¼˝ x 6˝• Rotation CCW • Shpg. 59 lbs.

1.3 cu in.Gear

PumpITEM 9-7733$49.99

• New, PARKER Model PZG2AR 208 X 3576gear pump. High efficiency design with lownoise.SPECIFICATIONS• Disp. 1.3 cu. in. / rev. • Mount 2 bolt SAE A• Pump type gear • Shaft ⅝-9 T spline• Rotation CW • Inlet port SAE 12• PSI 3000 cont., 3400 int. • Outlet ½˝ four bolt flange• RPM 1725 cont., 3450 int.• Size 4¾˝ x 5˝ x 4½˝• GPM 9.48 cont., 18.96 int.• Shpg. 8 lbs.

3.72 cu. in.Hyd Gear

Pump

ITEM 9-7946-C$199.99

• New, MARZOCCHI Model GHP3A-D-94-S1-FA hydraulic gear pump. Cast iron endhousings with aluminum center.SPECIFICATIONS• Disp. 3.72 cu. in. / rev. • Mount 2 bolt SAE B• Rotation CCW • Shaft ⅞˝ dia. 13T spline• Pressure 3000 PSI max. • Inlet port SAE 20• Speed 2800 RPM max. • Outlet port SAE 16• 27.5 GPM at 1800 RPM • Size 6½˝ x 6⅞˝ x 6⅛˝42.8 GPM at 2800 RPM • Shpg. 25 lbs.

1.64 cu. in.HydraulicPump

ITEM 9-10049$149.95• New FENNER Model 2S40AAC hydraulicgear pump. Aluminum housing.SPECIFICATIONS • Mount 2 bolt SAE A• Disp. 1.64 cu. in. / rev. • Shaft ⅝˝ diam. x 1˝ keyed• Pump Type Gear • Inlet port SAE 12• Rotation CCW • Outlet port SAE 10• PSI 2000 cont., 2450 int. • Case drain N/A• RPM 1750 cont., 3000 int. • Size 5½˝ x 5¼˝ x 4⅜˝• GPM 12.42 cont. • Shpg. 10 lbs.

3.179 cu. in.Hyd. Gear

Pump

ITEM 9-8031$159.99

• New, PRINCE Model SP25A52D9H2-Lhydraulic gear pump. Special non-sym-metrical gears give higher efficiency andperformance than conventional gearpumps. Rear ports.SPECIFICATIONS• Disp. 3.179 cu. in. / rev. • Mount 2 bolt SAE B• Pump Type Gear • Shaft ⅞˝ dia. x 1⅝˝ keyed• Rotation CCW • Inlet port SAE 16• Pressure 2500 PSI max. • Outlet port SAE 12• Speed 1850 RPM max. • Size 6⅝˝ x 7˝ x 5¾˝• 25 GPM at 1850 RPM • Shpg. 17 lbs.


Sauer-Danfoss VariablePiston Pump

ITEM 9-7647 $1995.00• New, SAUER-DANFOSS Model80004071. Features pressure balancedswashplate and quiet valve plate. Internalcharge pump. Main relief valves on all workports. Manual bypass valve. Tandem man-ually variable displacement piston pump.Two section auxiliary gear pump on back.Servo valve is set up for external pilot pres-sure source. Internal pilot pressure sourcewould require removing plug under servoto obtain pressure from charge pump. Mustuse external case drain.SPECIFICATIONS • Charge inlet port SAE 20• Displ. 2.30 cu. in. • Work ports SAE 16• Pump type variable piston • Auxiliary dual gear pump• Rotation CW Displ. 1.37/0.58 cu. in.• PSI 3000 cont., 4350 int. Ports SAE 16 inlet• RPM 500 min., 4000 int. Ports SAE 12/10 outlets• GPM 5 min., 40 int. 20/7½ GPM at 3000 RPM• Mount 2 bolt SAE B • Size 25½˝ x 8˝ x 10½˝• Shaft 1¼˝ dia. 19 T spline • Shpg. 195 lbs.

Truck freight only.

1.29/0.69 cu. in.DoublePumpITEM 9-8032$229.99• New, CASAPPA PLP20.20/20.11 fixeddisplacement double gear pump. Alu-minum body with cast iron mountingflange. Common suction port.SPECIFICATIONS• Front displ. 1.29 cu. in., 9.5 GPM at 1800 RPM• Rear displ. 0.69 cu. in., 5.1 GPM at 1800 RPM• Pump type gear • Shaft ⅞˝ 13 tooth spline• Rotation CW • Inlet port SAE 16• Pressure 2900 PSI max. • Outlet ports SAE 10• Speed 3000 RPM max. • Size 7½˝ x 6⅞˝ x 5˝• Mount 2 bolt SAE B • Shpg. 16 lbs.

1.04/0.52 cu. in. Hyd.DoublePump

ITEM 9-8098 $149.99• New BONDIOLI & PAVESI double hy-draulic gear pump. Aluminum housing.SPECIFICATIONS• Front displ. 1.04 cu. in. / rev., 7.6 GPM cont.• Rear displ. 0.52 cu. in. / rev., 3.8 GPM cont.• Pump Type Gear • Shaft ⅝˝ diam. 9T spline• Rotation CW • Common inlet port SAE 16• Pressure 3300 PSI cont. • Outlet ports SAE 10• Speed 3500 RPM max. • Size 7¼˝ x 5˝ x 4⅜˝• Mount 2 bolt SAE A • Shpg. 13 lbs.

800-488-3407 Hydraulic Double & Piston Pumps 39&

5.6 / 0.73 cu. in.DoublePump

ITEM 9-2025-A $475.00• New DOWTY. Aluminum. Pressure bal-anced bushings. Field reversible, disas-sembly required.SPECIFICATIONS• Front displ. 5.6 cu. in., IN 1½˝ flange, OUT 1˝ flange43 GPM at 1800 RPM, 57 GPM at 2400 RPM• Rear displ. 0.73 cu. in., IN SAE 12, OUT SAE 105.7 GPM at 1800 RPM, 7.6 GPM at 2400 RPM• Pump type gear • Shaft 1¼˝ dia. 14 T spline• Rotation CCW • Mount 2 bolt SAE C• PSI 3000 max. • Shpg. 39 lbs.

2.85 / 1.78 cu. in.DoublePumpITEM 9-5468$319.99• New EATON/CESSNA Model 25586-RAF. Two inlet ports, both inlet ports aretied together internally.SPECIFICATIONS• 1st section: displ. 2.85 cu. in.21 GPM at 1800 RPM, 28 GPM at 2500 RPM max.• 2nd section: displ. 1.78 cu. in.12.5 GPM at 1800 RPM, 18 GPM at 2500 RPM max.• PSI 2450 & 2950 cont. • Shaft ⅞˝ 13 tooth• RPM 2500 max. • IN SAE 20, OUT SAE 12• Rotation CW • Size 9¼˝ x 6¼˝ x 6¼˝• Mount SAE B 2 bolt • Shpg. 25 lbs.

0.40/0.31 cu. in.DoublePump

ITEM 9-7003$179.95• New EATON Model 26001-LAD hydraulicdouble gear pump. Dual inlet/outlet ports.SPECIFICATIONS• 1st section: displ. 0.40 cu. in., IN SAE 20, OUT SAE 106.4 GPM at 3600 RPM max. & 3000 PSI

• 2nd section: displ. 0.31 cu. in., IN SAE 16, OUT SAE 104.8 GPM at 3600 RPM max. & 3000 PSI

• PSI 3000 continuous • Mount SAE A 2 bolt3500 intermittent • Shaft ⅝˝ dia. x 1¼˝ keyed

• RPM 3600 max. • Size 6⅛˝ x 5⅛˝ x 5⅛˝• Rotation CCW • Shpg. 12 lbs.

0.66 / 0.58 cu. in.DoublePump

ITEM 9-7885$199.99• New, EATON Model 26504-LAT doublehydraulic gear pump. Common inlet withtwo outlets. Side ports.SPECIFICATIONS• 1st section: displ. 0.66 cu. in., 8.9 GPM at 3600 RPM• 2nd section: displ. 0.58 cu. in., 7.8 GPM at 3600 RPM• Pump type gear • Shaft ¾˝ 11T spline• Rotation CCW • Inlet port SAE 20• Pressure 3500 PSI max. • Outlet ports SAE 10• Speed 3600 RPM max. • Size 6⅝˝ x 5˝ x 5˝• Mount SAE A 2 bolt • Shpg. 13 lbs.

0.43 cu. in. Variable TandemPiston ZTR PumpITEM 9-7686 $129.99• New, White Hydraulic manufactured by Kanzaki Model DUP-7A.Unitized dual piston pump to operate hydraulic wheel motors onzero turn radius equipment applications including turf, light con-struction and other mobile equipment. Features include die cast aluminumbody, built-in bypass reliefs and charge pump, simplified one-piece design forlimited space and ease of installation, side load rated vertical input shaft for beltdrive applications and separate control shafts to control speed and direction of motors.SPECIFICATIONS • Flow per pump (fully stroked) 6 GPM at max. speed• Disp. 0.43 cu. in. • Mount 4 bolt 108mm x 145.5mm c.c. • Inlet port SAE 8• Pump type variable piston • Shaft 15mm tapered w/keyway & 10mm-1.5 LH threaded end • Work ports SAE 8• Rotation CCW • Control shafts 12mm dia. x 15mm with dual flats and pin holes• Drain port SAE 6• PSI 1425 cont., 3500 int. • Rqd. filtration input to charge pump • Size 7½˝ x 5¼˝ x 7˝• RPM 600 min., 3600 max.• Oil 10W-30 or 15W-40 engine type • Shpg. 17 lbs.

3.0 cu. in. RelianceJohn DeereHydraulicPump

ITEM 9-8095 $1149.99• Brand new, RELIANCE ModelNAR94660/NAR101807 replacement pres-sure compensated radial piston pump foruse with many models of John Deere farmtractors and industrial equipment. See ourwebsite for a list of John Deere machinesthis pump is compatible with. Pump is100% all new parts and has been run ontest bench to check pressures and func-tionality. Port adapters included to convertinlet to SAE 12 and outlet to SAE 10. Pumpcarries a 1-year parts and labor warranty.Optional $100 credit if complete rebuild-able core is returned.SPECIFICATIONS • Mount 4 bolt• Disp. 3.0 cu. in. / rev. • Shaft 1¼˝ dia. 14T spline• Pump type radial piston • Inlet port SAE 20• Rotation CCW • Outlet port SAE 12• Pressure 2350 PSI max. • Drain port SAE 3• Speed 2800 RPM max. • Size 6¼˝ x 10˝ x 8˝• 24 GPM at 1750 RPM • Shpg. 74 lbs.


3 Ph. HydraulicPower PackITEM 9-9778$249.95• New FENNER ModelAD110-A hydraulic powerpack. Momentary ONswitch on top of motor.Manual release valve.SPECIFICATIONS• Voltage 230 VAC 50 Hz • Reservoir 4 gal. plastic• Amperage 10 Amps • Ports SAE 6 & ⅜˝ NPT• Power 2 HP auxiliary return• Duty intermittent • Mount 6 hole on 2,• Flow 1.3 GPM max. 3 x 4⅞˝• Pressure 3850 PSI max. • Orientation vertical• Valving single-acting • Size 3415/16˝ x 10¾˝ x 10½˝• Relief 3075 PSI fixed • Shpg. 65 lbs.

40 Hydraulic AC & DC Powerpacks www.surpluscenter.com8

Hyd. Piston Pump,Control Valve,

ReservoirPowerUnits

• Brand new WILLIAMS MACHINE andTOOL COMPANY. Hardened, chromedand ground steel spool valves. Reservoirmade from 11 ga. steel, equipped withbreather cap on fill port.4 PistonSPECIFICATIONS • Reversible• 3.9 GPM • Reservoir cap. 3¾ gal.• 300 to 1000 RPM max. • Built-in relief• Displ. 0.9 cu. in./rev. (set at 2500 PSI)• Valve outlets ½˝ NPT • Requires 6.5 HP (max.)• Needle bearings • Size 15˝ x 11˝ x 8˝• Shaft 1˝ diam. • Shpg. 62 lbs.

ITEM 9-1049 $503.95• With 4 way valve for double acting cylinders.

ITEM 9-1049-A $503.95• With 3 way valve for single acting cylinders.8 PistonSPECIFICATIONS • Reversible• 12.2 GPM • Reservoir cap. 5¼ gal.• 300 to 1300 RPM max. • Built-in relief• Displ. 2.64 cu. in./rev. (set at 2500 PSI)• Valve outlets ½˝ NPT • Requires 17 HP (max.)• Needle bearings • Size 17˝ x 10˝ x 9˝• Shaft 1˝ diam. • Shpg. 79 lbs.

ITEM 9-1050 $602.95• With 4 way valve for double acting cylinders.

ITEM 9-1050-A $602.95• With 3 way valve for single acting cylinders.

2 HP 230 VACHyd. PowerpackITEM 9-7139$468.95• Brand new SPX hydraulic pow-erpack ideal for use in auto -mobile hoists, lifts and otherapplications. Cartridge stylecheck valve for load-holding.Momentary “ON” pushbuttonswitch for raising with a manuallever for lowering. Vertical mount.SPECIFICATIONS• 2 HP TENV motor • 2300 PSI fixed relief setting• 208-230 VAC, 1 Ph. • 4 gallon plastic reservoir• Amps 15-18 (3 gallon usable)• Int. duty • Port SAE 6• 2.25 GPM at 2000 PSI • Mount verticalmax. output • Size 10½˝ x 7˝ x 31½˝• 2300 PSI max. • Shpg. 60 lbs.

2 Stage HydraulicPowerPak

ITEM 9-074$662.95

• Brand new WILLIAMS. Use for hydrauliclog splitters. 2 stage, 8 piston hydraulicpump provides both large volume oil deliv-ery and high pressure. Requires less thanone-fourth input power than conventional1 stage units thus more economical oper-ation. Includes pump, 4 way control valveand reservoir in one compact unit. Drive ei-ther direction.SPECIFICATIONS• 8 piston pump • Reversible• High volume, low pressure • Displ. 2.64 cu. in./rev.6 GPM to 12 GPM • Cyl. ports ½˝ NPT• Low volume, high pressure • Double acting valve1.5 GPM to 3 GPM • Shaft 1˝ diam. x 1¾˝• High/low pressure • Requires 5 HP3000 PSI, 750 PSI • Reservoir 15 qts.• Recommended 600 RPM • Size 11˝ x 8½˝ x 8½˝• Max. 1200 RPM • Shpg. 68 lbs.

2 HP 115/230 VAC Hydraulic Power Packs• Brand new, SPX hydraulic power packs. All models include motor,gear pumpand steel reservoir tank with filtered filler/breather. Horizontal mount. Select froma variety of valve options in chart below.SPECIFICATIONS (all models)• 2 HP TEFC motor • 3450 RPM • Continuous duty• 115/230 VAC, 1 Ph. • 22/11 Amps • Port(s) SAE 6

Relief Valve Tank Size ITEM Pressure/Flow Factory Set Valve Type Cap. Useable Size Shpg. Price

9-7136 2.5 GPM @ 1000 PSI 1300 PSI None (use with external valve) 4 gal. 3.03 gal. 39˝ x 9˝ x 9⅜˝ 55 lbs. $476.95 9-7137 1.3 GPM @ 2000 PSI 2500 PSI Single Acting release, 115 Volt AC 2.5 gal. 1.6 gal. 30˝ x 9˝ x 9⅜˝ 52 lbs. $507.95 9-7138 1.3 GPM @ 2000 PSI 2500 PSI Double Acting 4 way, 115 Volt AC 2.5 gal. 1.6 gal. 30˝ x 9˝ x 9⅜˝ 53 lbs. $600.95 9-7135 1.3 GPM @ 2000 PSI 2500 PSI None (use with external valve) 2.5 gal. 1.6 gal. 30˝ x 9˝ x 9⅜˝ 51 lbs. $468.95

10 ft.Hand HeldRemoteControls

ITEM 9-1441-S $27.95• For single acting. Shpg. 4 lbs.

ITEM 9-1441-D $43.95• For double acting. Shpg. 4 lbs.

Prince HandPumps

ITEM 9-014 $494.95• Brand new PRINCE. Operate hydraulicpresses, dumps, plows, snow blades, hy-draulic tables, frame straighteners, etc.• Quick change. Choose from three pressureand volume rates with 3 position fulcrum. Mag-netic plug in reservoir traps ferrous metal par-ticles to keep from circulating. Mount pump invarious positions with 2 position handle.SPECIFICATIONS • Release valve• Vol./Press. • Press. port ⅜˝ NPT1.25 cu. in., 1500 PSI • 14¾˝ handle0.95 cu. in., 2000 PSI • 60-65 lbs. applied force0.60 cu. in., 3000 PSI on handle• 1 gal. reservoir • Size 16½˝ x 10¼˝ x 7½˝• IN check valve • Shpg. 34 lbs.

ITEM 9-5201 $464.95• Same as ITEM 9-014 above except ½ gal.tank. Size 11˝ x 10¼˝ x 7½˝. Shpg. 33 lbs.

Shaft DriveHydraulicPower UnitITEM 9-7549$109.95• New hydraulic power unit for log splitters,hydraulic tools and other portable equipment.Designed for vertical input with a gas engine.No mounting bracket or coupler. Requires ex-ternal control and pressure relief valves.SPECIFICATIONS • Rotation CW• Power 5 HP 3600 RPM • Ports ⅜˝ NPT pressure• Flow 2 GPM max. • Return ports ⅜˝ & ¾˝ NPT• Pressure 2500 PSI max. • Orientation vertical• Reservoir 1.1 gallons • Size 10˝ x 10˝ x 10˝• Shaft ½ ̋dia. x ⅞ ̋w/keyway • Shpg. 13 lbs.

Brand HandPumpsw/Tank

ITEM 9-4144$182.95• Brand new, BRAND ModelHP61-DA80. Double actionhand pump displaces oil onforward and return motion forrapid cylinder travel. Use for frame ma-chines, presses, truck cabs and other ap-plications. Integral tank.SPECIFICATIONS • Lever release• 0.6 cu. in./complete stroke• Port SAE 6• 3000 PSI • Size 6˝ x 4½˝ x 12½˝• 80 cu. in. reservoir (excluding handle)• Adj. relief valve • Shpg. 16 lbs.

ITEM 9-3509 $195.95• Model HP61DATL. Same as ITEM 9-4144above without oil reservoir. ¼˝ NPT inletport allows for connection to an externalhydraulic reservoir. Shpg. 13 lbs.

12 VDC PowerUnit

ITEM 9-7313 $199.95• Brand new, compact 12 VDC hydraulicpump unit. Ideal pump source for building hy-draulic power pack systems for lifts andhoists, emergency hydraulic source for mobileequipment and other DC applications.SPECIFICATIONS• 2 GPM at 500 PSI at 80 amps• 1.4 GPM at 2000 PSI at 200 amps• 12 VDC • Duty intermittent• 2500 PSI max. 1 min. ON/5 min. OFF• No relief valve • Size 11¼˝ x 5½˝ x 4½˝• IN SAE 8, OUT SAE 6 • Shpg. 23 lbs.

800-488-3407 Hydraulic DC Powerpacks 41&

12 VDC Hyd.Powerpack

Motors• Brand new, SPX Stonewound field motors. Use

on hydraulic power packs. Single terminal.Includes 9 tooth 0.48˝ dia splined couplingto connect to pump.SPECIFICATIONS • Enclosure TENV• Voltage 12 DC • Mount 2 studs, 3½˝ c/c• Amperage 300 max. • Shaft 0.48˝ dia 9 T spline• Rotation CW • Size 4½˝ dia. x 7˝

ITEM 10-2438 $92.95• Model KMD1 (1787-AC). Standard dutymotor. 8% duty cycle (24 seconds on/276seconds off in 5 minutes at full load).Shpg. 17 lbs.

ITEM 10-2508 $109.95• Model KMD3 (1789-AC). Extended dutymotor. 13% duty cycle (39 seconds on/261seconds off in 5 minutes at full load).Shpg. 18 lbs.

12 VDC Power Packs

9-1478 9-1479 9-1480 9-1790

• Brand new SPX STONE. Hydraulic power packs for operating hydraulic cylinders. Steel reservoirtank with inlet strainer, magnet and filtered filler/breather. Built in check valve and adjustable reliefvalve. See chart for details about control valves, tank size and pressure ratings.

SPECIFICATIONS (all models)• Flow rate 1.3 GPM at max PSI • 12 VDC motor • Needle bearings • Intermittent duty

Relief Valve Tank Size ITEM Valve Type Ports Factory Set Cap. Useable Size Shpg. Price

9-1478 Single Acting Lever Operated ⅜˝ NPT 2500 PSI 3 qt. 2.3 qt. 21˝ x 9˝ x 7˝ 38 lbs. $359.95 9-1479 Single Acting 12 Volt DC w/handheld remote SAE 6 2500 PSI 3 qt. 2.3 qt. 21˝ x 8˝ x 6˝ 39 lbs. $382.95 9-1790 Single Acting 12 Volt DC w/handheld remote SAE 6 1100 PSI 2.5 gal. 1.6 gal. 26˝ x 8˝ x 8⅜˝ 40 lbs. $405.95 9-7412 Single Acting 12 Volt DC w/handheld remote SAE 6 2500 PSI 2.5 gal. 1.6 gal. 25˝ x 87/16˝ x 8˝ 40 lbs. $409.95 9-1480 Double Acting 12 Volt DC (does not include remote) SAE 6 2500 PSI 3 qt. 2.3 qt. 21˝ x 8˝ x 7˝ 40 lbs. $402.95 9-7413 Double Acting 12 Volt DC (does not include remote) SAE 6 2500 PSI 2.5 gal. 1.6 gal. 25˝ x 8˝ x 7˝ 41 lbs. $414.95 9-7411 None (use with external valve) SAE 6 2500 PSI 2.5 gal. 1.6 gal. 25˝ x 7˝ x 8˝ 40 lbs. $363.95

12 VDC Powerpackw/ 1 Gal. Reservoir

ITEM 9-7384$249.95• New, SPX / FENNER ModelDB 1560 powerpack. Steelreservoir. Hydraulic powersource ideal for use with sep-arate directional control valve(not included).SPECIFICATIONS• Voltage 12 DC • Relief valve fixed 3500 PSI• Amperage 180 Amps max • Reservoir 1 gallon• Duty intermittent • Ports SAE 6• Flow 1 GPM at 500 PSI • Six mounting slots• Flow 0.42 GPM at 3450 PSI• Orientation vertical• Pressure 3500 PSI max • Size 25½˝ x 6½˝ x 7˝• Valving None • Shpg. 31 lbs.

12 VDC Powerpack

ITEM 9-7550 $219.95• Brand new SPX FENNER 12 volt DC hy-draulic powerpack for operating doubleacting cylinders. Reversible motor for di-rectional control with pilot operatedchecks for load holding. Compact sizewith filler/breather on tank that allows ver-tical or horizontal mounting. Dual non-adjusta ble relief valves set at 2000 psimaximum for extending and 800 PSI max-imum for retracting cylinder.• Extended shaft from motor allows emer-gency override that can be driven from aelectric/battery powered drill with perform-ance limited by the power of the drill.SPECIFICATIONS• 12 volt DC • Ports SAE 4• 250 amps max. • 1 gal. tank (¾ gal. usable)• 1.0 GPM at 1500 PSI • Duty intermittentat 150 amps 1 min. ON / 5 min. OFF

• 2000 PSI max. on extension• Size 20⅛˝ x 7½˝ x 5⅞˝• 800 PSI max. on retraction• Shpg. 16 lbs.

PowerpackRemoteControl

ITEM 9-7550-R$69.95• Brand new, 2 button remote control andreversing relay for item 9-7550. 15 ft. cord.Requires wiring between relay and power-pack (not included). Shpg 4 lbs.

42 Power Team 10,000 PSI Hydraulic Components www.surpluscenter.com8

Sidewinder Mini Jacks

5 Ton10 Ton

20 Ton

• Brand new, POWER TEAM sidewinder mini jack. Perfect addition to any tool box, thisremarkable little jack has multiple uses that are limited only by your imagination. Use itas a jack, spreader, gear puller and many other applications that a conventional jackwouldn’t fit. Jack can be operated vertically or horizontally. Handle functions in line withbase for easier use in confined spaces. Handle effort rated at capacity.

Retracted Base Saddle Handle OperationITEM Model Capacity Stroke Height Dia. Dia. # Strokes Effort Shpg. Price

9-8013 9105A 5 Ton ¾˝ 2½˝ 229/32˝ 19/64˝ 30 57 lbs. 6 lbs. $148.959-8014 9205A 5 Ton 1½˝ 3½˝ 229/32˝ 19/64˝ 38 57 lbs. 7 lbs. $283.959-8015 9210A 10 Ton 13/16˝ 4¾˝ 421/64˝ 121/32˝ 36 62 lbs. 14 lbs. $394.959-8016 9220A 20 Ton 13/16˝ 5⅛˝ 423/32˝ 25/64˝ 46 77 lbs. 20 lbs. $476.95

6 ft. 10,000 PSI¼˝ HoseWith Half Coupler

ITEM 9-8009$65.95

• Brand new, POWER TEAM 9756 six foothose with 9798 hose half coupler for usewith Power Team 10000 PSI hydraulic ac-cessories. Two ply rated hose reinforcedwith two braids of high tensile steel wire.Rubber covering is oil and weather resist-ant. MSHA approved. Plastic hose guardson each end with male pipe fittings.SPECIFICATIONS• Hose I.D. ¼˝ • Pressure• Length 6 ft. operating 10,000 PSI• End fittings ⅜˝ NPT burst 20,000 PSI• Coupler half 9798 male • Shpg. 2 lbs.

10,000 PSI, ½ HP115 VAC Hydraulic Pump

ITEM 9-8003 $1814.95• Brand new, POWER TEAM PE172 115volt AC hydraulic pump designed to oper-ate single acting cylinders. Two speed de-livery flow for fast cycle times. RemoteON/OFF pendant control with ten foot cord.Two position valve to either advance cylin-der and hold pressure with power off or ad-vance cylinder and release pressure withpower off. Valve also used to release pres-sure when in the hold pressure position.SPECIFICATIONS• Power ½ HP• Voltage 115 VAC • Operation electric• Amperage 10 amps • Reservoir size 2 gallon• Pressure 10,000 PSI • Reservoir useable 295 cu. in.• Flow • Sound level 81 dBA290 cu. in./min at 0 PSI at 10,000 PSI190 cu. in./min at 100 PSI • Outlet port ⅜˝ NPT20 cu. in./min at 5000 PSI • Size 11⅜˝ x 9¼˝ x 18½˝16 cu. in./min at 10,000 PSI • Shpg. 40 lbs.

10,000 PSI,¼˝ Hose

• Brand new, POWER TEAM hose for usewith Power Team 10,000 PSI hydraulic ac-cessories. Two ply rated hose reinforcedwith two braids of high tensile steel wire.Rubber covering is oil and weather resist-ant. MSHA approved. Plastic hose guardson each end with male pipe fittings.SPECIFICATIONS • Pressure• Hose I.D. ¼˝ operating 10,000 PSI• End fittings ⅜˝ NPT burst 20,000 PSI

ITEM 9-8010-6 $50.95• Length 6 ft. Shpg. 2 lbs.

ITEM 9-8010-10 $75.95• Length 10 ft. Shpg. 4 lbs.

10,000 PSIAir Driven Hyd. Pump

ITEM 9-8000$399.95

• Brand new, POWER TEAM PA6 air driven hydraulicpump designed to operate single acting cylinders.

Compact, lightweight and portable for powering all typesof hydraulic equipment. Internal relief valve.

SPECIFICATIONS • Flow • Sound level 85 dBA at 10,000 PSI• Air req. 40-100 PSI 78 cu. in./min at 500 PSI • Air inlet port ¼˝ NPT• Air consumption 20 CFM 29 cu. in./min at 5000 PSI • Hyd. outlet port ⅜˝ NPT• Hyd. pressure 10,000 PSI 10 cu. in./min at 10,000 PSI • Size 9½˝ x 5˝ x 7¾˝• Operation hand/foot • Reservoir size 105 cu. in. • Shpg. 18 lbs.

10,000 PSI HydraulicHand Pump

ITEM 9-8002 $385.95• Brand new, POWER TEAM P59L twospeed hand operated hydraulic pump foroperating single acting cylinders. Twospeed pump allows faster cycle times byautomatically shifting into high pressureupon cylinder contact with load. Pump de-sign also reduces handle effort and in-creases efficiency. Lightweight but durablealuminum reservoir, manifold and end cap.Large release valve knob gives added con-trol for metering loads down.SPECIFICATIONS• Pressure 10,000 PSI• Flow at cu. in./stroke:low press. 0.720, high press. 0.150

• Pressure: high flow 850 PSI, low flow 10,000 PSI• Oil capacity 69 cu. in. • Outlet port ⅜˝ NPT• Oil cap. useable 66 cu. in. • Size 21˝ x 5˝ x 7˝• Operation hand • Shpg. 15 lbs.

800-488-3407 Power Team 10,000 PSI Hydraulic Components 43&

Tee GaugeAdapter

ITEM 9-8012$39.95• Brand new, POWER TEAM 9670 teegauge adapter. For installing betweenpump and hose coupling. ⅜˝ NPT male/fe-male fitting ends with ¼˝ NPT femalegauge port. Shpg. ½ lb.

⅜˝, 10,000 PSI MaleHalf Coupler

ITEM 9-8011-M$16.95• Brand new, POWER TEAM 9798 ⅜˝NPT male half coupler with dust cap. De-signed for use up to 10000 PSI systems.Threaded union type for a secure andquick way to interchange accessories.Precision ball for tight shutoff when dis-connected. ⅜˝ NPT female fitting for con -nection to hose.SPECIFICATIONS• Size ⅜˝ NPT • Union type threaded• Pressure 10,000 PSI • Shpg. ¾ lb.

RSS Series Single Acting Hydraulic Cylinders

• Brand new, POWER TEAM shorty series single acting hydraulic cylinder. Features include solid steel cylinder body, grooved pistontop, maximum sized spring for fast return, Power Tech plated rod and ⅜˝ NPTF female model 9796 half coupler.SPECIFICATIONS• Single acting spring return • Pressure 10,000 PSI max. • Port ⅜˝ NPT • Rod end grooved piston top • Base end flat

ITEM Model Cyl. Cap. Bore Stroke Rod Dia. Oil Cap. R. Lgth. Rod Dia. Base Dia. Shpg. Price

9-8005-10-150 RSS101 10 Ton 111/16˝ 1½˝ 1½˝ 3.4 cu. in. 3½˝ 1½˝ 2¾˝ 9 lbs. $367.959-8005-20-175 RSS202 20 Ton 2⅜˝ 1¾˝ 25/32˝ 7.7 cu. in. 3¾˝ 25/32˝ 39/16˝ 13 lbs. $549.959-8005-50-238 RSS502 50 Ton 3½˝ 2⅜˝ 3⅛˝ 22.8 cu. in. 5˝ 3⅛˝ 4⅞˝ 26 lbs. $758.95

⅜˝, 10,000 PSICoupler SetITEM 9-8011$35.95• Brand new, POWER TEAM 9795 ⅜˝ NPTcomplete coupler set with dust caps. De-signed for use up to 10,000 PSI systems.Threaded union type for a secure and quickway to interchange accessories. Precisionball for tight shutoff when disconnected.Female half coupler has ⅜˝ NPT male fittingto connect to accessories while male halfcoupler has ⅜˝ NPT female fitting for con-nection to hose.SPECIFICATIONS• Size ⅜˝ NPT • Union type threaded• Pressure 10,000 PSI • Shpg. 1½ lbs.

10 Ton C SeriesSingle Acting Hydraulic Cylinders

• Brand new, POWER TEAM general purpose single acting hy-draulic cylinder. Features include solid steel cylinder body, alu-minum bronze bearing for long wear and off-center loads,maximum sized spring for fast return, chrome plated rod and ⅜˝NPTF female Model 9796 half coupler. Mounting options includebase mounting holes, threaded collar and threaded rod with cap.SPECIFICATIONS• Single acting spring return • Rod internal threaded 1-8• Bore 111/16˝ • Collar external threaded 2¼-14• Rod dia. 1½˝• Port ⅜˝ NPT • Base end flat 2 tapped holes• Cylinder capacity 10 ton Thread size 5/16-18 on 1.562˝ B.C.• Pressure 10,000 PSI max. Outside dia. 2¼˝

ITEM Model Stroke Oil Cap. R. Lgth. Shpg. Price

9-8004-10-4 C104C 4⅛˝ 9.2 cu. in. 6¾˝ 10 lbs. $333.959-8004-10-6 C106C 6⅛˝ 13.7 cu. in. 9¾˝ 13 lbs. $370.959-8004-10-10 C1010C 10⅛˝ 22.6 cu. in. 13¾˝ 16 lbs. $445.95

25 & 55 Ton C SeriesSingle Acting Hydraulic Cylinders

• Brand new, POWER TEAM general purpose single acting hy-draulic cylinder. Fea tures include solid steel cylinder body, alu-minum bronze bearing for long wear and off-center loads,maximum sized spring for fast return, chrome plated rod and ⅜˝NPTF female Model 9796 half coupler.

ITEM 9-8004-25-6 $605.95• Model C256C. Mounting options include base mounting holes,threaded collar and threaded rod with cap.SPECIFICATIONS • Rod dia. 2¼˝ • Rod internal threaded 1½-16• Single acting spring return • Oil capacity 32.2 cu. in. • Collar external threaded 35/16-12• Cylinder capacity 25 ton • Port ⅜˝ NPT • Base flat 2 tapped holes• Bore x Stroke 29/16˝ x 6¼˝ • Retracted lgth. 10¾˝ Thread ½-13 on 2.312˝ B.C.• Pressure 10,000 PSI max. • Shpg. 25 lbs. Outside dia. 3⅜˝

ITEM 9-8004-55-6 $1036.95• Model C556C. Mounting options include base mounting holesand threaded collar.SPECIFICATIONS • Rod dia. 3⅛˝ • Rod end flat cap• Single acting spring return • Oil capacity 69 cu. in. • Collar external threaded 5-12• Cylinder capacity 55 ton • Port ⅜˝ NPT • Base flat 2 tapped holes• Bore x Stroke 3¾˝ x 6¼˝ • Retracted lgth. 11⅛˝ Thread ½-13 on 3.750˝ B.C.• Pressure 10,000 PSI max. • Shpg. 54 lbs. Outside dia. 5˝

Single Acting Cylinders

RSS Series 10 Ton 25 & 55 TonC Series C Series

SPECIFICATIONS: Ports ½˝ NPT, 1˝ pins.Packing Kits:ITEM 9-8263-Kit-1 Rod 1¼˝ Shpg. 1 lb. $28.95ITEM 9-8263-Kit-2 Rod 1½˝ Shpg. 1 lb. $28.95

ITEM Stroke Rod R. Lgth. Col. Load Shpg. Price 9-8263-06 6˝ 1¼˝ 16¼˝ 28,863 lbs. 32 $105.95 9-8263-08-S 8˝ 1¼˝ 18¼˝ 28,863 lbs. 35 $110.95 9-8263-08 * 8˝ 1¼˝ 20¼˝ 28,863 lbs. 36 $105.95 9-8263-10 10˝ 1¼˝ 20¼˝ 28,863 lbs. 37 $114.95 9-8263-12 12˝ 1¼˝ 22¼˝ 28,863 lbs. 40 $119.95 9-8263-14 14˝ 1½˝ 24¼˝ 28,863 lbs. 45 $125.95 9-8263-16-S 16˝ 1½˝ 26¼˝ 28,863 lbs. 48 $131.95 9-8263-16 ** 16˝ 1½˝ 31½˝ 28,863 lbs. 50 $159.95 9-8263-18 18˝ 1½˝ 28¼˝ 28,863 lbs. 51 $145.95 9-8263-20 20˝ 1½˝ 30¼˝ 28,863 lbs. 54 $150.95 9-8263-24 24˝ 1½˝ 34¼˝ 21,648 lbs. 60 $164.95 9-8263-30 30˝ 1½˝ 40¼˝ 14,884 lbs. 69 $199.95 9-8263-36 36˝ 1½˝ 46¼˝ 10,853 lbs. 78 $217.95 9-8263-48 48˝ 1½˝ 58¼˝ 6504 lbs. 96 $257.95 * ASAE ** ASAE with 1¼˝ pins

44 Lynx Tie-Rod Hydraulic Cylinders www.surpluscenter.com8

SPECIFICATIONS: Ports ½˝ NPT, 1˝ pins.Packing Kits:ITEM 9-8262-Kit-1 Rod 1¼˝ Shpg. 1 lb. $27.95ITEM 9-8262-Kit-2 Rod 1½˝ Shpg. 1 lb. $28.95

ITEM Stroke Rod R. Lgth. Col. Load Shpg. Price 9-8262-06 6˝ 1¼˝ 16¼˝ 21,206 lbs. 25 $ 88.95 9-8262-08-S 8˝ 1¼˝ 18¼˝ 21,206 lbs. 27 $ 91.95 9-8262-08 * 8˝ 1¼˝ 20¼˝ 21,206 lbs. 28 $ 91.95 9-8262-10 10˝ 1¼˝ 20¼˝ 21,206 lbs. 29 $ 96.95 9-8262-12 12˝ 1¼˝ 22¼˝ 21,206 lbs. 32 $104.95 9-8262-14 14˝ 1¼˝ 24¼˝ 21,206 lbs. 34 $110.95 9-8262-16-S 16˝ 1½˝ 26¼˝ 21,206 lbs. 39 $116.95 9-8262-16 ** 16˝ 1½˝ 31½˝ 21,206 lbs. 41 $128.95 9-8262-18 18˝ 1½˝ 28¼˝ 21,206 lbs. 41 $121.95 9-8262-20 20˝ 1½˝ 30¼˝ 21,206 lbs. 44 $127.95 9-8262-24 24˝ 1½˝ 34¼˝ 21,206 lbs. 49 $142.95 9-8262-30 30˝ 1½˝ 40¼˝ 14,886 lbs. 56 $177.95 9-8262-36 36˝ 1½˝ 46¼˝ 10,857 lbs. 63 $201.95 9-8262-48 48˝ 1½˝ 58¼˝ 6503 lbs. 78 $249.95 * ASAE ** ASAE with 1¼˝ pins

3˝

BORE

3½˝

BORE

SPECIFICATIONS: Ports ⅜˝ NPT, 1˝ pin holesPacking Kits:ITEM 9-8261-Kit-1 Rod 1⅛˝ Shpg. 1 lb. $27.95ITEM 9-8261-Kit-2 Rod 1¼˝ Shpg. 1 lb. $27.95

ITEM Stroke Rod R. Lgth. Col. Load Shpg. Price 9-8261-06 6˝ 1⅛˝ 16¼˝ 14,726 lbs. 18 $ 83.95 9-8261-08-S 8˝ 1⅛˝ 18¼˝ 14,726 lbs. 20 $ 84.95 9-8261-08 * 8˝ 1⅛˝ 20¼˝ 14,726 lbs. 21 $ 83.95 9-8261-10 10˝ 1⅛˝ 20¼˝ 14,726 lbs. 22 $ 89.95 9-8261-12 12˝ 1⅛˝ 22¼˝ 14,726 lbs. 23 $ 92.95 9-8261-14 14˝ 1⅛˝ 24¼˝ 14,726 lbs. 26 $ 97.95 9-8261-16 16˝ 1¼˝ 26¼˝ 14,726 lbs. 27 $104.95 9-8261-18 18˝ 1¼˝ 28¼˝ 14,726 lbs. 29 $107.95 9-8261-20 20˝ 1¼˝ 30¼˝ 14,029 lbs. 31 $111.95 9-8261-24 24˝ 1¼˝ 34¼˝ 10,441 lbs. 35 $123.95 9-8261-30 30˝ 1¼˝ 40¼˝ 7177 lbs. 40 $145.95 9-8261-36 36˝ 1¼˝ 46¼˝ 5238 lbs. 45 $159.95 9-8261-48 48˝ 1¼˝ 58¼˝ 3137 lbs. 56 $195.95 * ASAE

SPECIFICATIONS: Ports ⅜˝ NPT, 1˝ pin holesPacking Kit: ITEM 9-8260-Kit Shpg. 1 lb. $26.95

ITEM Stroke Rod R. Lgth. Col. Load Shpg. Price 9-8260-06 6˝ 1⅛˝ 16¼˝ 9245 lbs. 16 $ 80.95 9-8260-08-S 8˝ 1⅛˝ 18¼˝ 9245 lbs. 18 $ 81.95 9-8260-08 * 8˝ 1⅛˝ 20¼˝ 9245 lbs. 18 $ 79.95 9-8260-10 10˝ 1⅛˝ 20¼˝ 9245 lbs. 19 $ 83.95 9-8260-12 12˝ 1⅛˝ 22¼˝ 9245 lbs. 20 $ 86.95 9-8260-14 14˝ 1⅛˝ 24¼˝ 9245 lbs. 22 $ 90.95 9-8260-16 16˝ 1⅛˝ 26¼˝ 9245 lbs. 24 $ 93.95 9-8260-18 18˝ 1⅛˝ 28¼˝ 9245 lbs. 25 $ 98.95 9-8260-20 20˝ 1⅛˝ 30¼˝ 9205 lbs. 27 $105.95 9-8260-24 24˝ 1⅛˝ 34¼˝ 6849 lbs. 30 $120.95 9-8260-30 30˝ 1⅛˝ 40¼˝ 4709 lbs. 34 $143.95 9-8260-36 36˝ 1⅛˝ 46¼˝ 3434 lbs. 39 $153.95 9-8260-48 48˝ 1⅛˝ 58¼˝ 2058 lbs. 48 $226.95 * ASAE

2˝

BORE

2½˝

BORE

• Brand new, LYNX LH3000 by Lion Hydraulics.Superior quality tie-rod cylinders built for years ofservice in demanding applications. 3000 PSI.

Dimensional Data for Lion TL Cylinders Throat Depth Thread Bore A B C D E F G

2˝ 2⅛˝ 21/16˝ 1⅛˝ 2½˝ 2⅜˝ 1⅛˝-12 UNF 2¾˝2½˝ 2⅛˝ 21/16˝ 1⅛˝ 2½˝ 2½˝ 1⅛˝-12 UNF 3⅛˝3˝ 2⅛˝ 21/16˝ 1⅛˝ 2⅝˝ 29/16˝ 1¼˝-12 UNF 3¾˝3½˝ 2⅛˝ 21/16˝ 1⅛˝ 2⅝˝ 29/16˝ 1¼˝-12 UNF 4½˝4˝ 2⅛˝ 21/16˝ 1⅛˝ 2⅝˝ 2⅝˝ 1¼˝-12 UNF 5⅛˝5˝ 2⅛˝ 2¼˝ 13/16˝ * 3˝ 3½˝ 1½˝-12 6˝

* Base end measure 15/16˝

Self ContainedTop LinkCylinders

• Brand new, Hydraulink air over hydraulic top link cylinder. ForCategory 1. Fully self contained, no tractor hydraulics required.Easy to adjust by simply loosening needle valve, moving into po-sition and retightening. Also acts as a shock absorber for muchsmoother operation with attachments, lessening operator fatigue.Swivel eye ends. Threaded adjustment at base end.

ITEM 9-7960-1 Category 1 $191.95SPECIFICATIONS• Weight capacity 5300 lbs. • Mechanical adjust. 2¾˝ • Retracted lgth. 19¼˝ to 28˝• Bore 1½˝ • Total adjust. range 8¾˝ • Overall size 21˝ x 1½˝ x 4˝• Hydraulic stroke 6˝ • Pin holes ¾˝ dia. • Shpg. 13 lbs.

ITEM 9-7960-2 Category 2 $235.95SPECIFICATIONS• Weight capacity 9400 lbs. • Mechanical adjust. 5¾˝ • Adjustable lgth. 22¼˝ to 34˝• Bore 2˝ • Total adjust. range 11¾˝ • Overall size 25˝ x 2⅜˝ x 4½˝• Hydraulic stroke 6˝ • Pin holes 1˝ dia. • Shpg. 22 lbs.

Category 1 Top Link Cylinders

• Brand new, AMA category 1 top link cylinder. Use in place oftop link on three point hitches for adjusting implement. Built-inlock valve to prevent cylinder drift. Ships with two ⅜˝ BSPPM to⅜˝ NPTM connectors.

ITEM 9-7682-08 $189.99SPECIFICATIONS• Double acting • Rod dia. 13/16˝ • Swivel eye ends 1¾˝ w.• Bore x Stroke 2˝ x 8¼˝ • Ports ⅜˝ BSPP • Pin holes ¾˝• Pressure 3000 • Retracted lgth. 18⅛˝ • Shpg. 18 lbs.

ITEM 9-7682-11 $203.95SPECIFICATIONS• Double acting • Rod dia. 13/16˝ • Swivel eye ends 1¾˝ w.• Bore x Stroke 2˝ x 11˝ • Ports ⅜˝ BSPP • Pin holes ¾˝• Pressure 3000 • Retracted lgth. 20⅞˝ • Shpg. 20 lbs.

800-488-3407 Lynx Tie-Rod Hydraulic Cylinders & Top Link Cylinders 45&

3˝ x 8˝ x 1½˝ Top Link Cylinder

ITEM 9-5152$211.95• Brand new. Self aligning swivel eye at each end.SPECIFICATIONS• Double acting • Rod diam. 1½˝ • Swivel eye ends 1¾˝ w.• Bore/stroke 3˝ x 8˝ • Ports ½˝ NPT • Pin holes 1˝• 3000 PSI • Retracted lgth. 19½˝ • Shpg. 27 lbs.

3˝ x 8˝ x 1½˝ Top Link Cylinder

ITEM 9-5196$219.95• Brand new. Use on tractors in place of top link on three pointhitches to adjust implement. Double swivel adapter on base ofcylinder to provide vertical and horizontal movement of hitch.SPECIFICATIONS• Double acting • Ports ½˝ NPT • Single eye rod• Bore/stroke 3˝ x 8˝ • Retracted lgth. 22˝ w/self aligning width 1¾˝• 3000 PSI • Pin holes 1˝ • Double swivel base• Rod diam. 1½˝ • Shpg. 29 lbs. assembly - width 2˝

SPECIFICATIONS: Ports ½˝ NPT, 1˝ pins.Packing Kits:ITEM 9-8264-Kit-2 Rod 1½˝ Shpg. 1 lb. $30.95ITEM 9-8264-Kit-3 Rod 1¾˝ Shpg. 1 lb. $30.95ITEM 9-8264-Kit-4 Rod 2˝ Shpg. 1 lb. $30.95

ITEM Stroke Rod R. Lgth. Col. Load Shpg. Price 9-8264-06 6˝ 1½˝ 16¼˝ 37,699 lbs. 39 $125.95 9-8264-08-S 8˝ 1½˝ 18¼˝ 37,699 lbs. 42 $130.95 9-8264-08 * 8˝ 1½˝ 20¼˝ 37,699 lbs. 43 $122.95 9-8264-10 10˝ 1½˝ 20¼˝ 37,699 lbs. 46 $134.95 9-8264-12 12˝ 1½˝ 22¼˝ 30,195 lbs. 49 $141.95 9-8264-14 14˝ 1½˝ 24¼˝ 37,699 lbs. 53 $151.95 9-8264-16-S 16˝ 1¾˝ 26¼˝ 37,699 lbs. 59 $162.95 9-8264-16 ** 16˝ 1¾˝ 31½˝ 37,699 lbs. 61 $187.95 9-8264-18 18˝ 1½˝ 28¼˝ 37,699 lbs. 62 $176.95 9-8264-20 20˝ 1½˝ 30¼˝ 37,699 lbs. 66 $182.95 9-8264-24-150 24˝ 1½˝ 34¼˝ 21,652 lbs. 69 $189.95 9-8264-24-175 24˝ 1¾˝ 34¼˝ 37,699 lbs. 74 $206.95 9-8264-24-200 24˝ 2˝ 34¼˝ 37,699 lbs. 79 $228.95 9-8264-30 30˝ 2˝ 40¼˝ 37,699 lbs. 91 $246.95 9-8264-36 36˝ 2˝ 46¼˝ 34,319 lbs. 104 $282.95 9-8264-48 48˝ 2˝ 58¼˝ 20,559 lbs. 128 $346.95 * ASAE ** ASAE with 1¼˝ pins

4˝

BORE

SPECIFICATIONS: Ports ½˝ NPT, 1¼˝ pins.Packing Kits:ITEM 9-8265-Kit-2 Rod 2˝ Shpg. 1 lb. $51.95

ITEM Stroke Rod R. Lgth. Col. Load Shpg. Price 9-8265-08 * 8˝ 2˝ 20¼˝ 58,905 lbs. 76 $229.95 9-8265-10 10˝ 2˝ 22¼˝ 58,905 lbs. 80 $239.95 9-8265-12 12˝ 2˝ 24¼˝ 58,905 lbs. 81 $258.95 9-8265-14 14˝ 2˝ 26¼˝ 58,905 lbs. 90 $275.95 9-8265-16-S 16˝ 2˝ 28¼˝ 58,905 lbs. 95 $293.95 9-8265-16 * 16˝ 2˝ 31½˝ 58,905 lbs. 99 $303.95 9-8265-18 18˝ 2˝ 30¼˝ 58,905 lbs. 100 $311.95 9-8265-20 20˝ 2˝ 32¼˝ 58,905 lbs. 105 $331.95 9-8265-24 24˝ 2˝ 36¼˝ 58,905 lbs. 115 $354.95 9-8265-30 30˝ 2˝ 42¼˝ 44,473 lbs. 130 $387.95 9-8265-36 36˝ 2˝ 48¼˝ 32,712 lbs. 145 $427.95 9-8265-48 ** 48˝ 2˝ 58¼˝ 19,812 lbs. 175 $465.95 * ASAE ** Ships truck freight only.

5˝

BORE

• Brand new, LYNX LH3000 by Lion Hydraulics.Superior quality tie-rod cylinders built for years ofservice in demanding applications. 3000 PSI.

See dimensional data on previous page.

Control With Tractor Remote

Top Link Cylinders

46 Prince Royal Plate Plus Tie-Rod Hydraulic Cylinders www.surpluscenter.com8

SPECIFICATIONS: Rod diam. 1⅛˝, ports SAE 8,clevis pins 1˝ diam.Packing Kit: ITEM 9-1665-Kit Shpg. 1 lb. $21.95

ITEM Stroke R. Lgth Shpg. Price 9-1665-08 8˝ 20¼˝ 26 lbs. $141.95 9-1665-08-S 8˝ 18¼˝ 26 lbs. $141.95 9-1665-10 10˝ 20¼˝ 26 lbs. $146.95 9-1665-12 12˝ 22¼˝ 27 lbs. $148.95 9-1665-14 14˝ 24¼˝ 28 lbs. $151.95 9-1665-16 16˝ 31½˝ 32 lbs. $158.95 9-1665-18 18˝ 28¼˝ 32 lbs. $162.95 9-1665-20 20˝ 30¼˝ 33 lbs. $167.95 9-1665-24 24˝ 34¼˝ 36 lbs. $178.95 9-1665-30 30˝ 40¼˝ 41 lbs. $194.95

3½˝

BORE

SPECIFICATIONS: Rod diam. 1⅜˝, ports SAE 8,clevis pins 1˝ diam.Packing Kit: ITEM 945-Kit Shpg. 1 lb. $30.95

ITEM Stroke R. Lgth Shpg. Price 945-08 8˝ 20¼˝ 40 lbs. $176.95 945-10 10˝ 20¼˝ 41 lbs. $184.95 945-12 12˝ 22¼˝ 44 lbs. $195.95 945-14 14˝ 24¼˝ 47 lbs. $205.95 945-16 16˝ 31½˝ 52 lbs. $218.95 945-16-S 16˝ 26¼˝ 49 lbs. $216.95 945-18 18˝ 28¼˝ 51 lbs. $226.95 945-20 20˝ 30¼˝ 54 lbs. $236.95 945-24 24˝ 34¼˝ 59 lbs. $257.95 945-30 30˝ 40¼˝ 65 lbs. $296.95 945-36 36˝ 46¼˝ 74 lbs. $335.95 945-48 48˝ 58¼˝ 90 lbs. $412.95

4˝

BORE

5˝

BORE

SPECIFICATIONS: Rod diam. 1¾˝, ports SAE 8,clevis pins 1˝ diam.Packing Kit: ITEM 9-1172-Kit Shpg. 1 lb. $43.95

ITEM Stroke R. Lgth Shpg. Price 9-1172-08 8˝ 20¼˝ 55 lbs. $240.95 9-1172-10 10˝ 20¼˝ 56 lbs. $250.95 9-1172-12 12˝ 22¼˝ 59 lbs. $263.95 9-1172-14 14˝ 24¼˝ 63 lbs. $276.95 9-1172-16 16˝ 31½˝ 71 lbs. $291.95 9-1172-16-S 16˝ 26¼˝ 66 lbs. $289.95 9-1172-18 18˝ 28¼˝ 71 lbs. $302.95 9-1172-20 20˝ 30¼˝ 74 lbs. $315.95 9-1172-24 24˝ 34¼˝ 81 lbs. $333.95 9-1172-30 30˝ 40¼˝ 93 lbs. $372.95 9-1172-36 36˝ 46¼˝ 102 lbs. $411.95 9-1172-48 48˝ 58¼˝ 125 lbs. $488.95

SPECIFICATIONS: Rod diam. 2˝, ports SAE 10,clevis pins 1¼˝ diam.Packing Kit: ITEM 9-1197-Kit Shpg. 1 lb. $47.95

ITEM Stroke R. Lgth Shpg. Price 9-1197-08 8˝ 20¼˝ 77 lbs. $333.95 9-1197-12 12˝ 24¼˝ 87 lbs. $362.95 9-1197-14 14˝ 26¼˝ 91 lbs. $377.95 9-1197-16 16˝ 31½˝ 102 lbs. $396.95 9-1197-18 18˝ 30¼˝ 104 lbs. $406.95 9-1197-20 20˝ 32¼˝ 109 lbs. $420.95 9-1197-24 24˝ 36¼˝ 120 lbs. $440.95 9-1197-30 30˝ 42¼˝ 134 lbs. $486.95 9-1197-36 36˝ 48¼˝ 150 lbs. $535.95 9-1197-48 48˝ 60¼˝ 219 lbs. $644.95

2˝

BORE

2½˝

BORE

SPECIFICATIONS: Rod diam. 1¼˝, ports SAE 8,clevis pins 1˝ diam.Packing Kit: ITEM 9-1513-Kit Shpg. 1 lb. $30.95

ITEM Stroke R. Lgth Shpg. Price 9-1513-08 8˝ 20¼˝ 29 lbs. $154.95 9-1513-10 10˝ 20¼˝ 30 lbs. $160.95 9-1513-12 12˝ 22¼˝ 33 lbs. $167.95 9-1513-14 14˝ 24¼˝ 34 lbs. $174.95 9-1513-16 16˝ 31½˝ 39 lbs. $183.95 9-1513-18 18˝ 28¼˝ 38 lbs. $189.95 9-1513-20 20˝ 30¼˝ 40 lbs. $196.95 9-1513-24 24˝ 34¼˝ 44 lbs. $210.95 9-1513-30 30˝ 40¼˝ 51 lbs. $231.95

3˝

BORE

SPECIFICATIONS: Rod diam. 1⅜˝, ports SAE 8,clevis pins 1˝ diam.Packing Kit: ITEM 9-1670-Kit Shpg. 1 lb. $26.95

ITEM Stroke R. Lgth Shpg. Price 9-1670-08 8˝ 20¼˝ 33 lbs. $162.95 9-1670-10 10˝ 20¼˝ 34 lbs. $169.95 9-1670-12 12˝ 22¼˝ 37 lbs. $177.95 9-1670-14 14˝ 24¼˝ 39 lbs. $185.95 9-1670-16 16˝ 31½˝ 43 lbs. $195.95 9-1670-16-S 16˝ 26¼˝ 42 lbs. $194.95 9-1670-18 18˝ 28¼˝ 44 lbs. $202.95 9-1670-20 20˝ 30¼˝ 45 lbs. $210.95 9-1670-24 24˝ 34¼˝ 50 lbs. $230.95 9-1670-30 30˝ 40¼˝ 58 lbs. $262.95 9-1670-36 36˝ 46¼˝ 64 lbs. $295.95 9-1670-48 48˝ 58¼˝ 77 lbs. $363.95

Dimensional Data for Prince Tie Rod Cylinders

Between Throat Depth Thread Ears Bore A B C D E F G 2˝ 113/16˝ 113/16˝ 2⅜˝ 15/16˝ 1⅛˝ 1⅛˝-12 UNF-3A 1.06˝ 2½˝ 1⅞˝ 113/16˝ 213/16˝ 15/16˝ 1⅛˝ 1⅛˝-12 UNF-3A 1.06˝ 3˝ 1⅞˝ 113/16˝ 27/16˝ 11/16˝ 1⅛˝ 1⅛˝-12 UNF-3A 1.06˝ 3½˝ 1⅞˝ 113/16˝ 27/16˝ 1¼˝ 1¼˝ 15/16˝-12 UNF-3A 1.06˝ 4˝ 1¾˝ 1⅞˝ 27/16˝ 1¼˝ 1¼˝ 1½˝-12 UNF-3A 1.06˝ 5˝ 1¾˝ 2˝ 2⅝˝ 1⅜˝ 1¼˝ 1½˝-12 UNF-3A 1.13˝

• Brand new PRINCE Royal Plate Plus tie-rod cylinders. Premiumquality with superior materials and workmanship. The Royal PlatePlus cylinder combines two rod coatings to provide excellent wear,hardness and corrosion protection.• Aircraft quality two-part polyester urethane paint that outper-forms powder coating for the life of the cylinder.• High quality seals and steel components.• 3000 PSI working pressure.• 7 year warranty against rust and corrosion.

800-488-3407 Wolverine Tie-Rod Cylinders 47&

2½˝

BORE

2˝

BORE

3˝

BORE

SPECIFICATIONS: 2500 PSI, Ports ⅜˝ NPT, Clevis pins 1˝.

ITEM Stroke Rod Dia. R. Length Shpg. Price9-7940-4 4˝ 1⅛˝ 14¼˝ 18 lbs. $ 55.959-7940-6 6˝ 1⅛˝ 16¼˝ 19 lbs. $ 58.959-7940-8-S 8˝ 1⅛˝ 18¼˝ 19 lbs. $ 60.959-7940-8 8˝ 1⅛˝ 20¼˝ 20 lbs. $ 62.959-7940-10 10˝ 1⅛˝ 20¼˝ 22 lbs. $ 66.959-7940-12 12˝ 1⅛˝ 22¼˝ 23 lbs. $ 68.959-7940-14 14˝ 1⅛˝ 24¼˝ 24 lbs. $ 73.959-7940-16-S 16˝ 1⅛˝ 26¼˝ 25 lbs. $ 76.959-7940-16 16˝ 1⅛˝ 31½˝ 26 lbs. $ 76.959-7940-18 18˝ 1⅛˝ 28¼˝ 26 lbs. $ 79.959-7940-20 20˝ 1⅛˝ 30¼˝ 28 lbs. $ 83.959-7940-24 24˝ 1⅛˝ 34¼˝ 30 lbs. $ 87.959-7940-30 30˝ 1⅛˝ 40¼˝ 38 lbs. $ 97.959-7940-36 36˝ 1⅛˝ 46¼˝ 43 lbs. $105.95

SPECIFICATIONS: 2500 PSI, Ports ⅜˝ NPT, Clevis pins 1˝.

ITEM Stroke Rod Dia. R. Length Shpg. Price9-7941-4 4˝ 1⅛˝ 14¼˝ 20 lbs. $ 63.959-7941-6 6˝ 1⅛˝ 16¼˝ 21 lbs. $ 66.959-7941-8-S 8˝ 1⅛˝ 18¼˝ 22 lbs. $ 70.959-7941-8 8˝ 1⅛˝ 20¼˝ 23 lbs. $ 70.959-7941-10 10˝ 1⅛˝ 20¼˝ 24 lbs. $ 72.959-7941-12 12˝ 1⅛˝ 22¼˝ 26 lbs. $ 76.959-7941-14 14˝ 1⅛˝ 24¼˝ 27 lbs. $ 83.959-7941-16-S 16˝ 1⅛˝ 26¼˝ 29 lbs. $ 86.959-7941-18 18˝ 1¼˝ 28¼˝ 31 lbs. $ 92.959-7941-20 20˝ 1¼˝ 30¼˝ 33 lbs. $ 95.959-7941-24 24˝ 1¼˝ 34¼˝ 36 lbs. $102.959-7941-30 30˝ 1¼˝ 40¼˝ 48 lbs. $117.959-7941-36 36˝ 1¼˝ 46¼˝ 59 lbs. $125.95

SPECIFICATIONS: 2500 PSI, Ports ½˝ NPT, Clevis pins 1˝,except ITEM 9-7942-16 (*) which has 1¼˝ pins.

ITEM Stroke Rod Dia. R. Length Shpg. Price9-7942-4 4˝ 1¼˝ 14¼˝ 22 lbs. $ 68.959-7942-6 6˝ 1¼˝ 16¼˝ 27 lbs. $ 72.959-7942-8-S 8˝ 1¼˝ 18¼˝ 28 lbs. $ 75.959-7942-8 8˝ 1¼˝ 20¼˝ 29 lbs. $ 76.959-7942-10 10˝ 1¼˝ 20¼˝ 32 lbs. $ 83.959-7942-12 12˝ 1¼˝ 22¼˝ 33 lbs. $ 88.959-7942-14 14˝ 1¼˝ 24¼˝ 34 lbs. $ 90.959-7942-16-S 16˝ 1¼˝ 26¼˝ 36 lbs. $ 99.959-7942-16 * 16˝ 1½˝ 31½˝ 38 lbs. $101.959-7942-18 18˝ 1½˝ 28¼˝ 38 lbs. $104.959-7942-20 20˝ 1½˝ 30¼˝ 40 lbs. $111.959-7942-24 24˝ 1½˝ 34¼˝ 51 lbs. $119.959-7942-30 30˝ 1½˝ 40¼˝ 62 lbs. $152.959-7942-36 36˝ 1½˝ 46¼˝ 71 lbs. $169.95


ITEM Stroke Rod Dia. R. Length Shpg. Price9-7944-4 4˝ 1½˝ 14¼˝ 32 lbs. $108.959-7944-8-S 8˝ 1½˝ 18¼˝ 37 lbs. $109.959-7944-8 8˝ 1½˝ 20¼˝ 39 lbs. $111.959-7944-10 10˝ 1½˝ 20¼˝ 40 lbs. $114.959-7944-12 12˝ 1½˝ 22¼˝ 43 lbs. $120.959-7944-14 14˝ 1½˝ 24¼˝ 44 lbs. $126.959-7944-16-S 16˝ 1½˝ 26¼˝ 51 lbs. $133.959-7944-16 * 16˝ 2˝ 31½˝ 50 lbs. $146.959-7944-18 18˝ 1½˝ 28¼˝ 54 lbs. $146.959-7944-20 20˝ 1½˝ 30¼˝ 56 lbs. $152.959-7944-24 24˝ 2˝ 34¼˝ 74 lbs. $164.959-7944-30 30˝ 2˝ 40¼˝ 91 lbs. $215.959-7944-36 36˝ 2˝ 46¼˝ 102 lbs. $243.95

3½˝

BORE

4˝

BORE


ITEM Stroke Rod Dia. R. Length Shpg. Price9-7943-6 6˝ 1¼˝ 16¼˝ 29 lbs. $ 86.959-7943-8-S 8˝ 1¼˝ 18¼˝ 31 lbs. $ 90.959-7943-8 8˝ 1¼˝ 20¼˝ 35 lbs. $ 94.959-7943-10 10˝ 1¼˝ 20¼˝ 33 lbs. $ 95.959-7943-12 12˝ 1¼˝ 22¼˝ 36 lbs. $103.959-7943-14 14˝ 1¼˝ 24¼˝ 38 lbs. $108.959-7943-16-S 16˝ 1¼˝ 26¼˝ 40 lbs. $113.959-7943-16 * 16˝ 1½˝ 31½˝ 42 lbs. $116.959-7943-18 18˝ 1¼˝ 28¼˝ 43 lbs. $119.959-7943-20 20˝ 1½˝ 30¼˝ 45 lbs. $124.959-7943-24 24˝ 1½˝ 34¼˝ 54 lbs. $157.959-7943-30 30˝ 1½˝ 40¼˝ 63 lbs. $174.959-7943-36 36˝ 1½˝ 46¼˝ 73 lbs. $179.95

Wolverine Tie-Rod Cylinders

• Brand new, WOLVERINE by PRINCE tie-rod hydraulic cylinders. High qualitytie-rod cylinders at great savings. Black powder coated paint. Plated tie rods.Side port configuration in base end.

Dimensional Data for Wolverine Cylinders Throat Depth Thread Bore A B C D E F G

2˝ 2.13˝ 2.00˝ 1.13˝ 2.625˝ 2.50˝ 1⅛˝-12 UNF 2.82˝2½˝ 2.13˝ 2.00˝ 1.13˝ 2.625˝ 2.50˝ 1⅛˝-12 UNF 3.38˝

3˝ 2.13˝ 2.00˝ 1.13˝ 2.625˝ 2.50˝ 1⅛˝-12 UNF 3.90˝3½˝ 2.13˝ 2.00˝ 1.13˝ 2.625˝ 2.50˝ 1¼˝-12 UNF 4.62˝

4˝ 2.13˝ 2.00˝ 1.13˝ 2.625˝ 2.50˝ 1½˝-12 UNF 4.75˝

48 Prince Welded Hydraulic Cylinders www.surpluscenter.com8

Prince “Royal” Line CylindersBrand new, welded cylinders made by PRINCE MFG. 2500 PSI

working pressure. Fully chromed piston rod.

2½˝

BORE

3˝

BORE

SPECIFICATIONS: Rod dia. 1½˝, ports ½˝ NPT, 1˝ pin holes.Packing Kit: ITEM 9-1650-Kit Shpg. 1 lb. $37.95

ITEM Stroke R. Lgth Shpg. Price 9-1650-08 8˝ 16˝ 25 lbs. $183.95 9-1650-12 12˝ 20˝ 30 lbs. $199.95 9-1650-16 16˝ 24˝ 33 lbs. $216.95 9-1650-20 20˝ 28˝ 37 lbs. $231.95 9-1650-24 24˝ 32˝ 41 lbs. $247.95 9-1650-30 30˝ 38˝ 47 lbs. $269.95 9-1650-32 32˝ 40˝ 50 lbs. $276.95 9-1650-36 36˝ 44˝ 53 lbs. $292.95 9-1650-40 40˝ 48˝ 59 lbs. $299.95 9-1650-42 42˝ 50˝ 61 lbs. $306.95 9-1650-48 48˝ 56˝ 69 lbs. $335.95

SPECIFICATIONS: Rod dia. 1⅜˝, ports ⅜˝ NPT, pin holes ¾˝.Packing Kit: ITEM 9-1672-Kit Shpg. 1 lb. $34.95

ITEM Stroke R. Lgth Shpg. Price 9-1672-08 8˝ 16˝ 20 lbs. $164.95 9-1672-12 12˝ 20˝ 23 lbs. $173.95 9-1672-16 16˝ 24˝ 27 lbs. $182.95 9-1672-20 20˝ 28˝ 30 lbs. $190.95 9-1672-24 24˝ 32˝ 35 lbs. $198.95 9-1672-30 30˝ 38˝ 40 lbs. $210.95 9-1672-32 32˝ 40˝ 42 lbs. $218.95 9-1672-36 36˝ 44˝ 45 lbs. $227.95 9-1672-42 42˝ 50˝ 52 lbs. $262.95

3½˝

BORE

SPECIFICATIONS: Rod diam. 1½˝, ports ½˝ NPT. 1˝ pin holes.Packing Kit: ITEM 9-062-Kit Shpg. 1 lb. $43.95

ITEM Stroke R. Lgth Shpg. Price 9-062-08 8˝ 16˝ 30 lbs. $228.95 9-062-12 12˝ 20˝ 34 lbs. $244.95 9-062-16 16˝ 24˝ 40 lbs. $261.95 9-062-20 20˝ 28˝ 43 lbs. $277.95 9-062-24 24˝ 32˝ 47 lbs. $284.95 9-062-30 30˝ 38˝ 51 lbs. $308.95 9-062-32 32˝ 40˝ 57 lbs. $316.95 9-062-36 36˝ 44˝ 62 lbs. $332.95 9-062-40 40˝ 48˝ 66 lbs. $348.95 9-062-42 42˝ 50˝ 69 lbs. $356.95 9-062-48 48˝ 56˝ 75 lbs. $430.95

4˝

BORE

SPECIFICATIONS: Rod diam. 2˝, ports ½˝ NPT, 1¼˝ pin holes.Packing Kit: ITEM 9-030-Kit Shpg. 1 lb. $46.95

ITEM Stroke R. Lgth Shpg. Price 9-030-08 8˝ 17˝ 43 lbs. $287.95 9-030-12 12˝ 21˝ 49 lbs. $294.95 9-030-16 16˝ 25˝ 56 lbs. $310.95 9-030-20 20˝ 29˝ 62 lbs. $326.95 9-030-24 24˝ 33˝ 69 lbs. $340.95 9-030-30 30˝ 39˝ 81 lbs. $366.95 9-030-32 32˝ 41˝ 82 lbs. $397.95 9-030-36 36˝ 45˝ 91 lbs. $409.95 9-030-40 40˝ 49˝ 95 lbs. $438.95 9-030-42 42˝ 51˝ 99 lbs. $446.95 9-030-48 48˝ 57˝ 106 lbs. $467.95 9-030-60 60˝ 69˝ 127 lbs. $545.95

Dimensional Data for Prince “Royal” Cylinders

Crosstube Width Bore A B C L1 L2

2½˝ 29/16˝ 9/16˝ ¾˝ 3˝ 1⅜˝

3˝ 25/16˝ 11/16˝ 1˝ 3½˝ 1½˝

3½˝ 111/16˝ 11/16˝ 1˝ 4˝ 1½˝

4˝ 2⅛˝ 15/16˝ 1⅛˝ 4½˝ 2˝

Bore - Inside diameter of cylinder

Stroke - How far a cylinder extends out

R-length - Distance in inches between pincenters when cylinder is retracted

Rod Diameter - Diameter of cylinder rod

Single Acting - Cylinder is powered one way

Double Acting - Cylinder is powered bothways (two way)

Crosstube End - Round tube welded per-pendicular to cylinder

Single Eye End - For mounting betweentwo mounting ears.

Clevis End - Two mounting ears

Cylinder Definitions

Rod Port Base PortRod Diam.

Retracted LengthStroke

Bore

800-488-3407 Prince Heavy Duty Hydraulic Cylinders 49&

Heavy Duty Cylinders

• Brand new PRINCE “Gladiator” line cylinders. Welded,double acting cylinders with fully chromed piston rod. 3000PSI working pressure.

5˝

BORE

6˝

BORE

SPECIFICATIONS: Max. 3000 PSI, rod dia. 2½˝, ports ¾˝ NPT,crosstubes, pins 1½˝ dia.Packing Kit: ITEM 9-1143-Kit Shpg. 1 lb. $83.95

ITEM Stroke R. Lgth Shpg. Price 9-1143-08 8˝ 19˝ 80 lbs. $479.95 9-1143-12 12˝ 23˝ 89 lbs. $519.95 9-1143-16 16˝ 27˝ 100 lbs. $542.95 9-1143-20 20˝ 31˝ 112 lbs. $579.95 9-1143-24 24˝ 35˝ 120 lbs. $622.95 9-1143-30 30˝ 41˝ 135 lbs. $681.95 9-1143-36 36˝ 47˝ 196 lbs. $728.95 9-1143-48 48˝ 61˝ 234 lbs. $902.95 9-1143-54 54˝ 68˝ 251 lbs. $959.95 9-1143-60 60˝ 75˝ 270 lbs. $1025.95

SPECIFICATIONS: Max. 3000 PSI, rod dia. 3˝, ports ¾˝ NPT,crosstubes, pins 1½˝ dia.Packing Kit: ITEM 9-1144-Kit Shpg. 1 lb. $82.95

ITEM Stroke R. Lgth Shpg. Price 9-1144-08 8˝ 19˝ 112 lbs. $ 597.95 9-1144-12 12˝ 23˝ 121 lbs. $ 630.95 9-1144-16 16˝ 27˝ 133 lbs. $ 675.95 9-1144-24 24˝ 35˝ 205 lbs. $ 782.95 9-1144-30 30˝ 41˝ 225 lbs. $ 865.95 9-1144-36 36˝ 47˝ 245 lbs. $ 949.95 9-1144-48 48˝ 61˝ 292 lbs. $1218.95 9-1144-54 54˝ 68˝ 319 lbs. $1321.95 9-1144-60 60˝ 75˝ 346 lbs. $1364.95

4½˝

BORE

SPECIFICATIONS: Rod dia. 2˝.Packing Kit: ITEM 9-5115-Kit Shpg. 1 lb. $35.95


SPECIFICATIONS: Rod dia. 2¼˝.Packing Kit: ITEM 9-5113-Kit Shpg. 1 lb. $45.95


4˝

BORE

Dimensional Data for Prince “Gladiator” Cylinders

Crosstube Width Bore A B L1 L2

5˝ 21/16˝ 1¼˝ 5¾˝ 4˝

6˝ 21/16˝ 1¼˝ 6¾˝ 4˝

Dimensional Data for Prince “Fortress” Cylinders

Crosstube Width Bore A O.D. L1 L2

4˝ 2¼˝ 2˝ 4¾˝ 3¼˝

4½˝ 2¼˝ 2˝ 5¼˝ 3¼˝

Heavy Duty Welded Cylinders

• Brand new PRINCE “Fortress” double acting cylinders useinternal threaded gland, U-cup seals for heavy duty appli-cations. Max. 3000 PSI. Ports SAE 10. Crosstube ends for1¼˝ pins.

50 Surplus Center Welded Crosstube Cylinders www.surpluscenter.com8

SPECIFICATIONS: Rod diam. 2¼˝, ports SAE 8, pin holes 1¼˝.Crosstube width: rod 4˝, base 4¾˝.Packing Kit: ITEM 9-7714-Kit Shpg. 1 lb. $56.95

ITEM Stroke R. Lgth Shpg. Price 9-7714-8 8˝ 19˝ 52 lbs. $283.95 9-7714-10 10˝ 21˝ 56 lbs. $304.95 9-7714-12 12˝ 23˝ 60 lbs. $320.95 9-7714-14 14˝ 25˝ 66 lbs. $335.95 9-7714-16 16˝ 27˝ 69 lbs. $349.95 9-7714-18 18˝ 29˝ 75 lbs. $364.95 9-7714-20 20˝ 31˝ 77 lbs. $374.95 9-7714-24 24˝ 35˝ 86 lbs. $407.95 9-7714-30 30˝ 41˝ 97 lbs. $439.95 9-7714-32 32˝ 43˝ 106 lbs. $460.95 9-7714-36 36˝ 47˝ 115 lbs. $483.95 9-7714-40 40˝ 51˝ 123 lbs. $508.95 9-7714-42 42˝ 53˝ 126 lbs. $524.95 9-7714-48 48˝ 61˝ 142 lbs. $569.95 9-7714-54 54˝ 68˝ 204 lbs. $617.95 9-7714-60 60˝ 75˝ 220 lbs. $694.95 9-7714-72 72˝ 89˝ 250 lbs. $832.95 9-7714-84 84˝ 101˝ 273 lbs. $880.95 9-7714-96 96˝ 113˝ 300 lbs. $982.95

2½˝

BORE

2˝

BORE

3˝

BORE

SPECIFICATIONS: Rod diam. 1¼˝, ports SAE 8, pin holes 1˝.Crosstube width: rod 1¾˝, base 2⅝˝.Packing Kit: ITEM 9-7710-Kit Shpg. 1 lb. $32.95

ITEM Stroke R. Lgth Shpg. Price 9-7710-4 4˝ 11˝ 13 lbs. $115.95 9-7710-6 6˝ 13˝ 15 lbs. $122.95 9-7710-8 8˝ 15˝ 16 lbs. $128.95 9-7710-10 10˝ 17˝ 18 lbs. $133.95 9-7710-12 12˝ 19˝ 19 lbs. $139.95 9-7710-14 14˝ 21˝ 20 lbs. $144.95 9-7710-16 16˝ 23˝ 22 lbs. $147.95 9-7710-18 18˝ 25˝ 23 lbs. $150.95 9-7710-20 20˝ 27˝ 25 lbs. $160.95 9-7710-24 24˝ 31˝ 28 lbs. $168.95 9-7710-30 30˝ 37˝ 32 lbs. $182.95 9-7710-32 32˝ 39˝ 34 lbs. $195.95 9-7710-36 36˝ 43˝ 37 lbs. $205.95

SPECIFICATIONS: Rod diam. 1½˝, ports SAE 8, pin holes 1˝.Crosstube width: rod 2˝, base 3⅛˝.Packing Kit: ITEM 9-7711-Kit Shpg. 1 lb. $34.95

ITEM Stroke R. Lgth Shpg. Price 9-7711-4 4˝ 12˝ 18 lbs. $136.95 9-7711-6 6˝ 14˝ 19 lbs. $144.95 9-7711-8 8˝ 16˝ 21 lbs. $149.95 9-7711-10 10˝ 18˝ 23 lbs. $157.95 9-7711-12 12˝ 20˝ 25 lbs. $164.95 9-7711-14 14˝ 22˝ 27 lbs. $171.95 9-7711-16 16˝ 24˝ 29 lbs. $180.95 9-7711-18 18˝ 26˝ 31 lbs. $185.95 9-7711-20 20˝ 28˝ 33 lbs. $194.95 9-7711-24 24˝ 32˝ 37 lbs. $205.95 9-7711-30 30˝ 38˝ 43 lbs. $229.95 9-7711-32 32˝ 40˝ 45 lbs. $230.95 9-7711-36 36˝ 44˝ 49 lbs. $252.95

SPECIFICATIONS: Rod diam. 1¾˝, ports SAE 8, pin holes 1˝.Crosstube width: rod 2¼˝, base 3⅝˝.Packing Kit: ITEM 9-7712-Kit Shpg. 1 lb. $36.95

ITEM Stroke R. Lgth Shpg. Price 9-7712-4 4˝ 12˝ 23 lbs. $164.95 9-7712-6 6˝ 14˝ 25 lbs. $173.95 9-7712-8 8˝ 16˝ 27 lbs. $181.95 9-7712-10 10˝ 18˝ 30 lbs. $190.95 9-7712-12 12˝ 20˝ 33 lbs. $199.95 9-7712-14 14˝ 22˝ 35 lbs. $208.95 9-7712-16 16˝ 24˝ 37 lbs. $219.95 9-7712-18 18˝ 26˝ 40 lbs. $228.95 9-7712-20 20˝ 28˝ 43 lbs. $239.95 9-7712-24 24˝ 32˝ 48 lbs. $253.95 9-7712-30 30˝ 38˝ 57 lbs. $278.95 9-7712-32 32˝ 40˝ 58 lbs. $281.95 9-7712-36 36˝ 44˝ 63 lbs. $304.95 9-7712-40 40˝ 48˝ 69 lbs. $313.95 9-7712-42 42˝ 50˝ 71 lbs. $315.95 9-7712-48 48˝ 58˝ 81 lbs. $339.95

3½˝

BORE

4˝

BORE

SPECIFICATIONS: Rod diam. 2˝, ports SAE 8, pin holes 1˝.Crosstube width: rod 2½˝, base 4⅛˝.Packing Kit: ITEM 9-7713-Kit Shpg. 1 lb. $36.95

ITEM Stroke R. Lgth Shpg. Price 9-7713-8 8˝ 16˝ 35 lbs. $215.95 9-7713-10 10˝ 18˝ 38 lbs. $227.95 9-7713-12 12˝ 20˝ 41 lbs. $237.95 9-7713-14 14˝ 22˝ 44 lbs. $246.95 9-7713-16 16˝ 24˝ 47 lbs. $257.95 9-7713-18 18˝ 26˝ 50 lbs. $267.95 9-7713-20 20˝ 28˝ 54 lbs. $280.95 9-7713-24 24˝ 32˝ 59 lbs. $296.95 9-7713-30 30˝ 38˝ 69 lbs. $324.95 9-7713-32 32˝ 40˝ 73 lbs. $332.95 9-7713-36 36˝ 44˝ 79 lbs. $357.95 9-7713-40 40˝ 48˝ 84 lbs. $360.95 9-7713-42 42˝ 50˝ 87 lbs. $382.95 9-7713-48 48˝ 58˝ 102 lbs. $407.95

• Brand new, manufactured exclusively for Surplus Center. Heavyduty double acting cylinders. External gland for superior perform-ance at high pressure. Crosstubes at both ends. Excellent formany heavy duty mobile applications. Made in USA. 3500 PSIworking pressure.

Dimensional Data for Surplus Center Welded Cylinders

Crosstube Width Bore A B C D L1 L2

2˝ 2⅜˝ 2¾˝ 1½˝ ⅝˝ 2⅝˝ 1¾˝

2½˝ 2⅞˝ 3¼˝ 1½˝ 1⅜˝ 3⅛˝ 2˝

3˝ 3⅜˝ 3¾˝ 1½˝ 1⅜˝ 3⅝˝ 2¼˝

3½˝ 3⅞˝ 4¼˝ 1½˝ 1¼˝ 4⅛˝ 2½˝

4˝ 4½˝ 5˝ 2˝ 2˝ 4¾˝ 4˝

URPLUS CENTE

Made in the USA

800-488-3407www.surpluscenter.com1015 West “O” St.Lincoln, NE 68528

S R

& 800-488-3407 Surplus Center Welded Clevis Cylinders 51

SPECIFICATIONS: Rod dia. 2˝, ports SAE 8, pin holes 1˝.Packing Kit: ITEM 9-7719-Kit Shpg. 1 lb. $39.95

ITEM Stroke R. Lgth Shpg. Price 9-7719-4 4˝ 14¼˝ 39 lbs. $219.95 9-7719-6 6˝ 16¼˝ 41 lbs. $229.95 9-7719-8-S 8˝ 18¼˝ 46 lbs. $239.95 9-7719-8 8˝ 20¼˝ 46 lbs. $244.95 9-7719-10 10˝ 20¼˝ 49 lbs. $251.95 9-7719-12 12˝ 22¼˝ 53 lbs. $260.95 9-7719-14 14˝ 24¼˝ 57 lbs. $271.95 9-7719-16 16˝ 26¼˝ 61 lbs. $283.95 9-7719-18 18˝ 28¼˝ 64 lbs. $293.95 9-7719-20 20˝ 30¼˝ 68 lbs. $304.95 9-7719-24 24˝ 34¼˝ 76 lbs. $326.95 9-7719-30 30˝ 40¼˝ 88 lbs. $371.95 9-7719-36 36˝ 46¼˝ 101 lbs. $408.95

2½˝

BORE

3½˝

BORE

2˝

BORE

3˝

BORE

4˝

BORE

SPECIFICATIONS: Rod dia. 1⅛˝, ports SAE 8, pin holes 1˝.Packing Kit: ITEM 9-7715-Kit Shpg. 1 lb. $29.95


SPECIFICATIONS: Rod dia. 1¼˝, ports SAE 8, pin holes 1˝.Packing Kit: ITEM 9-7716-Kit Shpg. 1 lb. $25.95


SPECIFICATIONS: Rod dia. 1½˝, ports SAE 8, pin holes 1˝.Packing Kit: ITEM 9-7717-Kit Shpg. 1 lb. $31.95


SPECIFICATIONS: Rod dia. 1¾˝, ports SAE 8, pin holes 1˝.Packing Kit: ITEM 9-7718-Kit Shpg. 1 lb. $33.95


• Brand new, manufactured exclusively for Surplus Center. Heavyduty double acting cylinders. External gland for superior perform-ance at high pressure. Formed steel clevises for maximum dura-bility. Excellent for many heavy duty mobile applications. Made inUSA. Rated 3500 PSI.

URPLUS CENTE

Made in the USA


S R

Dimensional Data for Surplus Center Welded CylindersClevis Width Inside Width Throat Depth Barrel O.D. Gland O.D.

Bore A B C D E F G H

2˝ 1.88˝ 1.88˝ 1.13˝ 1.13˝ 1.90˝ 1.90˝ 2.375˝ 2.75˝

2½˝ 1.88˝ 1.88˝ 1.13˝ 1.13˝ 1.90˝ 1.90˝ 2.875˝ 3.25˝

3˝ 2.13˝ 2.13˝ 1.13˝ 1.13˝ 1.80˝ 1.80˝ 3.375˝ 3.75˝

3½˝ 2.13˝ 2.13˝ 1.13˝ 1.13˝ 1.80˝ 1.80˝ 3.875˝ 4.25˝

4˝ 2.38˝ 2.38˝ 1.13˝ 1.13˝ 2.10˝ 2.25˝ 4.50˝ 5.00˝

52 Double Rod & Small Bore Hydraulic Cylinders www.surpluscenter.com8

Double RodSteering Cylinders

• Brand new double rod, steering type hydraulic cylinder. Both rodends are drilled and tapped to accept a standard ¾˝-16 tie rod end.A pair of 1˝ thick steel mounting blocks are welded to cylinderbody. Retracted length is measured end of rod to end of rod.SPECIFICATIONS• PSI 3000 max. • Both ends drilled 2⅛˝, tapped ¾˝-16 x 1⅝˝• Ports SAE 6 • Wrench flats at rod ends• ⅜˝ mounting holes • Square ring gland retainer

ITEM Bore Stroke R. Diam. R. Lgth Mnt. Ctrs. Shpg. Price 9-6845 2˝ 8˝ 1¼˝ 23˝ 11½˝ x 3.12˝ 22 lbs. $187.95 9-6846 2˝ 10˝ 1¼˝ 27˝ 13½˝ x 3.12˝ 24 lbs. $194.95 9-6688 2½˝ 8˝ 1½˝ 22½˝ 11½˝ x 3.62˝ 24 lbs. $204.95 9-6847 2½˝ 10˝ 1½˝ 26½˝ 13½˝ x 3.62˝ 26 lbs. $216.95Seal Kits:ITEM 9-6886 Use with ITEMS 9-6845 and 9-6846 Shpg. 1 lb. $24.95ITEM 9-6887 Use with ITEMS 9-6688 and 9-6847 Shpg. 1 lb. $31.95

2½˝ DA Loader Cylinders

• Brand new MONARCH INDUSTRIES. Double acting cylinder.Welded construction. Ideal size for many loader applications.SPECIFICATIONS• Double acting • 2500 PSI max. • Ports ⅜˝ NPT • Crosstube base 2⅞˝ wide• Bore 2½˝ • Rod diam. 1½˝ • Clevis rod • Pin holes 1˝

1½˝ Bore Cylinders

• Brand new, LION Hydraulics WX welded cylinder. Internalthreaded gland with wrench flats for easy service. Cast steel crosstubes at each end.SPECIFICATIONS• Double acting • Ports SAE 6 • Rod diam. 1˝ • Pin holes ¾˝• PSI 3000 max. • Crosstube ends: rod 1½˝ w., base 1⅞˝ w. SPECIFICATIONS: Rod diam. 1˝, ports SAE 6, pin holes ⅝˝.

Packing Kit: ITEM 9-7706-Kit Shpg. 1 lb. $21.95 ITEM Stroke R. Lgth Shpg. Price 9-7706-4 4˝ 11˝ 9 lbs. $83.95 9-7706-6 6˝ 13˝ 10 lbs. $88.95 9-7706-8 8˝ 15˝ 11 lbs. $94.95 9-7706-10 10˝ 17˝ 12 lbs. $98.95 9-7706-12 12˝ 19˝ 13 lbs. $104.95

SPECIFICATIONS: Rod dia. 1¼˝, ports SAE 8, pin holes ¾˝.Packing Kit: ITEM 9-7707-Kit Shpg. 1 lb. $27.95


2˝

BORE

1½˝

BORE

ITEM Stroke R. Lgth Shpg. Price 9-7270-08 8˝ 16˝ 12 lbs. $117.95 9-7270-10 10˝ 18˝ 13 lbs. $121.95 9-7270-12 12˝ 20˝ 14 lbs. $124.95 9-7270-14 14˝ 22˝ 15 lbs. $128.95 9-7270-16 16˝ 24˝ 16 lbs. $132.95 9-7270-18 18˝ 26˝ 17 lbs. $136.95 9-7270-20 20˝ 28˝ 18 lbs. $139.95 9-7270-24 24˝ 32˝ 20 lbs. $147.95

ITEM Stroke R. Lgth Shpg. Price 9-6772 14˝ 24¼˝ 28 lbs. $128.95 9-6773 22˝ 32¼˝ 38 lbs. $154.95 9-6774 30˝ 38⅝˝ 45 lbs. $167.99 9-6775 36˝ 48⅝˝ 52 lbs. $183.95

2½˝

BORE

1½˝

BORE

• Brand new, manufactured exclusively for Surplus Center. In-ternal gland with wire-lock retaining ring. Pin-hole thru rod andcross-tube at base end. Made in USA. Rated 3000 PSI.

Dimensional Data for Surplus Center Welded Cylinders

Crosstube Width Bore A B C D L1

1½˝ 1⅞˝ ⅝˝ 1¼˝ 3⅛˝ 2˝

2˝ 2⅜˝ ¾˝ 1¼˝ 4˝ 2½˝

URPLUS CENTE

Made in the USA


S RURPL

US CENTE

Made in the USA


S R

Bore - Inside diameter of cylinderStroke - How far a cylinder extends outR-length - Distance in inches between pin

centers when cylinder is retractedRod Diameter - Diameter of cylinder rod

Single Acting - Cylinder is powered one way

Double Acting - Cylinder is powered bothways (two way)

Crosstube End - Round tube welded per-pendicular to cylinder

Single Eye End - For mounting betweentwo mounting ears.

Clevis End - Two mounting ears

Cylinders Definitions Rod Port Base PortRod Diam.

Retracted LengthStroke

Bore

& 800-488-3407 Surplus Center Welded Hydraulic Cylinders 53

1˝ BoreSPECIFICATIONS• 3000 PSI max. • Ball end OD 2˝• Rod diam. ⅝˝ • Ball end width 1˝• Ports SAE 6 • Pin holes ½˝

ITEM Stroke R. Lgth. Shpg. Price 9-7257-4 4˝ 10˝ 5 lbs. $ 91.95 9-7257-6 6˝ 12˝ 5 lbs. $ 97.95 9-7257-8 8˝ 14˝ 6 lbs. $102.95 9-7257-10 10˝ 16˝ 7 lbs. $109.95 9-7257-12 12˝ 18˝ 7 lbs. $113.95

1½˝ BoreSPECIFICATIONS• 3000 PSI max. • Ball end OD 2˝• Rod diam. 1˝ • Ball end width 1˝• Ports SAE 6 • Pin holes ¾˝

ITEM Stroke R. Lgth. Shpg. Price 9-7258-4 4˝ 11¼˝ 6 lbs. $ 88.95 9-7258-6 6˝ 13¼˝ 7 lbs. $ 93.95 9-7258-8 8˝ 15¼˝ 9 lbs. $ 99.95 9-7258-10 10˝ 17¼˝ 10 lbs. $103.95 9-7258-12 12˝ 19¼˝ 11 lbs. $108.95 9-7258-14 14˝ 21¼˝ 12 lbs. $114.95 9-7258-16 16˝ 23¼˝ 13 lbs. $120.95

2˝ BoreSPECIFICATIONS• 3000 PSI max. • Ball end OD 2¾˝• Rod diam. 1¼˝ • Ball end width 1¾˝• Ports SAE 8 • Pin holes 1˝• ITEM 9-7259-36 has 1½˝ rod diam.,

ITEM Stroke R. Lgth. Shpg. Price 9-7259-6 6˝ 13½˝ 15 lbs. $124.95 9-7259-8 8˝ 15½˝ 16 lbs. $130.95 9-7259-10 10˝ 17½˝ 17 lbs. $137.95 9-7259-12 12˝ 19½˝ 19 lbs. $143.95 9-7259-16 16˝ 23½˝ 22 lbs. $157.95 9-7259-20 20˝ 27½˝ 24 lbs. $170.95 9-7259-24 24˝ 31½˝ 27 lbs. $188.95 9-7259-30 30˝ 37½˝ 32 lbs. $189.95 9-7259-36 36˝ 44¼˝ 43 lbs. $228.95

Clevis EndCylinders

• Brand new, manufactured exclusively forSurplus Center. Double acting cylinderswith formed clevis ends. Made in USA.

1˝ BoreSPECIFICATIONS: 1500 PSI working pressure,rod ½˝ dia., ports ¼˝ NPT, ½˝ pin holes in clevis.Packing Kit:ITEM 9-1649-Kit Shpg. 1 lb. $12.95 ITEM Stroke R. Lgth Shpg. Price

9-1649-04 4˝ 10½˝ 6 lbs. $76.95 9-1649-06 6˝ 12½˝ 6 lbs. $82.95 9-1649-08 8˝ 14½˝ 7 lbs. $87.95 9-1649-10 10˝ 16½˝ 7 lbs. $92.95 9-1649-12 12˝ 18½˝ 8 lbs. $96.95

2˝ BoreSPECIFICATIONS: Max. 2500 PSI, rod diam.1⅛˝, ports ½˝ NPT, clevis pins 1˝ diam.Packing Kits:ITEM 943-Kit Rod 1⅛˝ Shpg. 1 lb. $17.95ITEM 943-A-Kit Rod 1½˝ Shpg. 1 lb. $18.95 ITEM Stroke R. Lgth Shpg. Price

943-06 6˝ 16¼˝ 14 lbs. $108.95 943-08 8˝ 20¼˝ 16 lbs. $113.95 943-10 10˝ 20¼˝ 17 lbs. $117.95 943-12 12˝ 22¼˝ 18 lbs. $122.95 943-16 16˝ 26¼˝ 21 lbs. $131.95 943-18 18˝ 28¼˝ 22 lbs. $136.95 943-24 24˝ 34¼˝ 26 lbs. $150.95 943-30 30˝ 40¼˝ 29 lbs. $164.95 943-36* 36˝ 46¼˝ 42 lbs. $192.95 943-48* 48˝ 58¼˝ 53 lbs. $231.95* Rod diam. 1½˝


• Brand new, manufactured exclusively forSurplus Center. Welded double actingcylinders with crosstube ends. Internalgland with snap ring. Made in USA.SPECIFICATIONS:Max. 2000 PSI, rod diam. ¾˝,ports ⅜˝ NPT, pin holes ¾˝ diam.Packing Kit:ITEM 9-4410-Kit Shpg. 1 lb. $12.95

ITEM Stroke R. Lgth Shpg. Price

9-4410-04 4˝ 9½˝ 8 lbs. $ 86.95 9-4410-06 6˝ 11½˝ 9 lbs. $ 91.95 9-4410-08 8˝ 13½˝ 10 lbs. $ 97.95 9-4410-10 10˝ 15½˝ 11 lbs. $102.95 9-4410-12 12˝ 17½˝ 12 lbs. $108.95 9-4410-14 14˝ 19½˝ 12 lbs. $114.95 9-4410-16 16˝ 21½˝ 13 lbs. $119.95 9-4410-18 18˝ 23½˝ 14 lbs. $125.95

Swivel Ball End Cylinders• Brand new, manufactured exclusively for Surplus Center.Welded cylinders with wire-lock gland retainer. Swivel balljoints at both ends allow for angular motion.

2½˝ BoreSPECIFICATIONS• 3000 PSI max. • Ball end OD 2¾˝• Rod diam. 1½˝ • Ball end width 1¾˝• Ports SAE 8 • Pin holes 1˝• ITEM 9-7260-36 has 1¾˝ rod diam.,

ITEM Stroke R. Lgth. Shpg. Price 9-7260-6 6˝ 13½˝ 17 lbs. $146.95 9-7260-8 8˝ 15½˝ 19 lbs. $155.95 9-7260-10 10˝ 17½˝ 21 lbs. $162.95 9-7260-12 12˝ 19½˝ 23 lbs. $171.95 9-7260-16 16˝ 23½˝ 27 lbs. $190.95 9-7260-20 20˝ 27½˝ 30 lbs. $208.95 9-7260-24 24˝ 31½˝ 34 lbs. $221.95 9-7260-30 30˝ 37½˝ 41 lbs. $238.95 9-7260-36 36˝ 44˝ 58 lbs. $279.95

3˝ BoreSPECIFICATIONS• 3000 PSI max. • Ball end OD 3.13˝• Rod diam. 1½˝ • Ball end width 1¾˝• Ports SAE 8 • Pin holes 1˝• ITEM 9-7261-36 has 1¾˝ rod diam.

ITEM Stroke R. Lgth. Shpg. Price 9-7261-6 6˝ 14¼˝ 20 lbs. $175.95 9-7261-8 8˝ 16¼˝ 22 lbs. $184.95 9-7261-10 10˝ 18¼˝ 24 lbs. $192.95 9-7261-12 12˝ 20¼˝ 26 lbs. $203.95 9-7261-16 16˝ 24¼˝ 31 lbs. $223.95 9-7261-20 20˝ 28¼˝ 36 lbs. $241.95 9-7261-24 24˝ 32¼˝ 41 lbs. $259.95 9-7261-36 36˝ 44¾˝ 60 lbs. $289.95

Seal Kits Shpg. 1 lb. each ITEM Use with Price 9-7257-KIT All 9-7257 cylinders $18.95 9-7258-KIT All 9-7258 cylinders $21.95 9-7259-KIT-1 9-7259 cylinders $26.95 except 9-7259-36 9-7259-KIT-2 9-7259-36 only $29.95 9-7260-KIT-1 9-7260 cylinders $21.95 except 9-7260-36 9-7260-KIT-2 9-7260-36 only $34.95 9-7261-KIT-1 9-7261 cylinders $29.95 except 9-7261-36 9-7261-KIT-2 9-7261-36 only $36.95

URPLUS CENTE

Made in the USA


S R

URPLUS CENTE

Made in the USA


S R

When you are in the area visit our showroom at1015 West “O” Street, Lincoln, NE

54 Prince Rephasing Tie-Rod Cylinders www.surpluscenter.com8

3¾˝ and 4˝ Bore Cylinders

3˝ and 3¼˝ and 3½˝ Bore Cylinders

2½˝ and 2¾˝ Bore Cylinders

SPECIFICATIONS: Rod dia. 1⅜˝, ports SAE 8, 3000 PSI, clevis pin 1˝ dia.

Bore Size ITEM Stroke R. Lgth Shpg. Price9-7928-8 8˝ 20¼˝ 51 lbs. $262.959-7928-10 10˝ 22¼˝ 53 lbs. $277.959-7928-12 12˝ 24¼˝ 57 lbs. $292.959-7928-16 16˝ 28¼˝ 67 lbs. $310.959-7929-8 8˝ 20¼˝ 49 lbs. $245.959-7929-10 10˝ 22¼˝ 53 lbs. $269.959-7929-12 12˝ 24¼˝ 57 lbs. $274.959-7929-16 16˝ 28¼˝ 64 lbs. $290.95

SPECIFICATIONS: Rod dia. 1¼˝, ports SAE 8, 3000 PSI, clevis pin 1˝ dia.

Bore Size ITEM Stroke R. Lgth Shpg. Price9-7925-8 8˝ 20¼˝ 32 lbs. $209.959-7925-10 10˝ 22¼˝ 33 lbs. $217.959-7925-12 12˝ 24¼˝ 36 lbs. $225.959-7925-16 16˝ 28¼˝ 43 lbs. $252.959-7926-8 8˝ 20¼˝ 38 lbs. $218.959-7926-10 10˝ 22¼˝ 40 lbs. $234.959-7926-12 12˝ 24¼˝ 42 lbs. $249.959-7926-16 16˝ 28¼˝ 49 lbs. $264.959-7927-8 8˝ 20¼˝ 38 lbs. $238.959-7927-10 10˝ 22¼˝ 40 lbs. $241.959-7927-12 12˝ 24¼˝ 42 lbs. $258.959-7927-16 16˝ 28¼˝ 49 lbs. $272.95

SPECIFICATIONS: Rod dia. 1⅛˝, ports SAE 8, 3000 PSI, clevis pin 1˝ dia.

Bore Size ITEM Stroke R. Lgth Shpg. Price9-7923-8 8˝ 20¼˝ 28 lbs. $199.959-7923-10 10˝ 22¼˝ 29 lbs. $210.959-7923-12 12˝ 24¼˝ 31 lbs. $220.959-7924-8 8˝ 20¼˝ 32 lbs. $204.959-7924-10 10˝ 22¼˝ 33 lbs. $214.959-7924-12 12˝ 24¼˝ 35 lbs. $224.95

2¾˝ Bore

2½˝ Bore

3˝ Bore

3¼˝ Bore

3½˝ Bore

4˝ Bore

3¾˝ Bore

SPECIFICATIONS: Rod dia. 1½˝, ports SAE 8, 3000 PSI, clevis pin 1˝ dia.

Bore Size ITEM Stroke R. Lgth Shpg. Price9-7931-8 8˝ 20¼˝ 75 lbs. $337.959-7931-10 10˝ 22¼˝ 80 lbs. $349.959-7931-12 12˝ 24¼˝ 86 lbs. $361.959-7931-16 16˝ 28¼˝ 99 lbs. $391.959-7932-8 8˝ 20¼˝ 75 lbs. $340.959-7932-10 10˝ 22¼˝ 80 lbs. $356.959-7932-12 12˝ 24¼˝ 86 lbs. $371.959-7932-16 16˝ 28¼˝ 99 lbs. $401.95

SPECIFICATIONS: Rod dia. 2˝, ports SAE 8, 3000 PSI, clevis pin 1˝ dia. Bore Size ITEM Stroke R. Lgth Shpg. Price

9-7930-8 8˝ 20¼˝ 63 lbs. $331.959-7930-10 10˝ 22¼˝ 67 lbs. $342.959-7930-12 12˝ 24¼˝ 72 lbs. $354.959-7930-16 16˝ 28¼˝ 84 lbs. $383.95

Prince Rephasing Tie-Rod Cylinders• Brand New PRINCE rephasing cylinders for series applications where multiple cylinders extend andretract equally. Two or more cylinders are plumbed in series, with bore and rod diameters sized so allrods extend or retract in unison. The rephase bypass allows oil to bypass piston on full cylinder ex-tension to fill the next cylinder during initial synchronization or to compensate for internal leakage.• The Royal Plate cylinder combines two rod coatings to provide excellent wear, hardness and cor-rosion protection.

Not to be used as single cylinder at full pressure due to column buckling!

4½˝ Bore

5˝ Bore

4¾˝ Bore

Dimensional Data for Prince Rephasing CylindersThroat Depth Throat Depth

Bore A B C D E F2½˝ 11/16˝ 113/16˝ 59/32˝ 1⅞˝ 15/16˝ 11/16˝2¾˝ 11/16˝ 113/16˝ 523/32˝ 1⅞˝ 15/16˝ 11/16˝3˝ 11/16˝ 113/16˝ 527/32˝ 1⅞˝ 15/16˝ 11/16˝3¼˝ 11/16˝ 113/16˝ 527/32˝ 1⅞˝ 1¼˝ 11/16˝3½˝ 11/16˝ 113/16˝ 527/32˝ 1⅞˝ 1¼˝ 11/16˝3¾˝ 1⅛˝ 1⅞˝ 511/32˝ 1¾˝ 1¼˝ 11/16˝4˝ 1⅛˝ 1⅞˝ 511/32˝ 1¾˝ 1¼˝ 11/16˝4½˝ 1⅛˝ 1⅞˝ 41/32˝ 1¾˝ 1¼˝ 1⅛˝4¾˝ 1⅛˝ 113/16˝ 41/32˝ 1¾˝ 1¼˝ 1⅛˝5˝ 1⅛˝ 113/16˝ 41/32˝ 1¾˝ 1¼˝ 1⅛˝


4¾˝ and 5˝ Bore Cylinders

ITEM 9-7923-Kit Shpg. 1 lb. $55.95ITEM 9-7924-Kit Shpg. 1 lb. $54.95ITEM 9-7925-Kit Shpg. 1 lb. $49.95ITEM 9-7926-Kit Shpg. 1 lb. $45.95ITEM 9-7927-Kit Shpg. 1 lb. $50.95

ITEM 9-7928-Kit Shpg. 1 lb. $65.95ITEM 9-7929-Kit Shpg. 1 lb. $59.95ITEM 9-7930-Kit Shpg. 1 lb. $53.95ITEM 9-7931-Kit Shpg. 1 lb. $97.95ITEM 9-7932-Kit Shpg. 1 lb. $57.95

Packing Kits

800-488-3407 Double Acting Cylinders 55&

1½˝ x 6½˝ x 1˝

ITEM 9-8074 $69.99SPECIFICATIONS• New BAILEY • Retracted lgth. 1213/16˝• Double acting • Rod clevis 1˝ wide• Bore x Stroke 1½˝ x 6½˝ Pin hole 9.5 mm (0.374˝)• Pressure 3000 PSI max. • Base tang ½˝ wide• Rod dia. 1˝ Pin hole 13/16˝• Ports SAE 4 • Shpg. 8 lbs.

1½˝ x 6½˝ x 1˝

ITEM 9-8073 $69.95• Retracted length measured from pin ctr.to rod end.SPECIFICATIONS• New BAILEY • Retracted lgth. 14⅛˝• Double acting • Rod end threaded• Bore x Stroke 1½˝ x 6½˝ ⅝˝-18 x 1⅝˝ long• Pressure 3000 PSI max. • Base tang ½˝ wide• Rod dia. 1˝ Pin hole 13/16˝• Ports SAE 4 • Shpg. 8 lbs.

1¼˝ x 17˝ x ¾˝

ITEM 9-9874 $69.99SPECIFICATIONS • Ports SAE 4• New, double acting • Retracted lgth. 21¾˝• Bore x Stroke 1¼˝ x 17˝ • Crosstube ends• Pressure 2000/3000 PSI rod ⅞˝ w., base 1⅞˝ w.max extend/retract • Pin holes ½˝• Rod dia. ¾˝ • Shpg. 10 lbs.

1¼˝ x 53/16˝ x ¾˝

ITEM 9-8104 $59.99• New, PARKER. Aluminum construction.SPECIFICATIONS• Double acting • Retracted lgth. 811/32˝• Bore x Stroke 1¼˝ x 53/16˝ • Crosshole ends• Pressure 3000 PSI max. rod ¾˝ w., base 1¼˝ w.• Rod dia. ¾˝ • Pin holes ½˝• Ports 7/16-24 inverted flare • Shpg. 4 lbs.

1˝ x 20˝ x ¾˝

ITEM 9-7672 $59.99• Port at the end of the threaded base end.SPECIFICATIONS• New, double acting • Retracted lgth. 29¼˝• Bore x Stroke 1˝ x 20˝ • Threaded ends• Pressure 2500 PSI max. rod ⅝˝-18 x 3⅜˝• Rod dia. ¾˝ base ⅞˝-14 x 1⅜˝• Ports SAE 4 • Shpg. 10 lbs.

Cross Loader Cylinders

• New, CROSS MFG. welded cylinder. Ideal cylinder for loaders and other mobile equipment. Thread-in gland retainer.• All have crosstube rod, base is either crosstube (C) or tang (T).

Additional information, including port configurations and line drawings available on our website.

Rod Base Pin ITEM Bore Stroke PSI Rod Ports R. Lgth Width Base Width Holes Shpg. Price 9-7157 1¾˝ 19⅝˝ 3000 11/16˝ SAE 6 30½˝ 1½˝ C 2˝ 1˝ 22 lbs. $ 69.95 9-7158 1¾˝ 23⅛˝ 3000 11/16˝ SAE 6 3211/16˝ 1½˝ T ¾˝ 1˝ 22 lbs. $ 69.95 9-7162 2¼˝ 2011/16˝ 3000 1¼˝ SAE 8 30⅞˝ 2¼˝ C 3¼˝ 1⅛˝ 29 lbs. $ 74.95 9-7337 2½˝ 8⅞˝ 2500 1¼˝ SAE 6 16˝ 2˝ C 3¼˝ 1˝ 21 lbs. $ 49.99 9-7164 2½˝ 1911/16˝ 3000 1½˝ SAE 8 2911/16˝ 2¼˝ C 3¼˝ 1⅛˝ 39 lbs. $109.95 9-7338 3˝ 15˝ 3200 1½˝ SAE 8 55˝ 211/16˝ C 5˝ 1¼˝ 39 lbs. $119.99 9-7339 3˝ 15˝ 3200 1½˝ SAE 8 61˝ 211/16˝ C 5˝ 1¼˝ 60 lbs. $119.99 9-7340 3˝ 15˝ 3200 1½˝ SAE 8 61˝ 211/16˝ C 5˝ 1¼˝ 60 lbs. $119.99 9-7341 3˝ 15˝ 3200 1½˝ SAE 8 61˝ 211/16˝ C 5˝ 1¼˝ 60 lbs. $119.99 9-7343 3½˝ 11⅛˝ 3200 1½˝ SAE 8 63½˝ 211/16˝ C 5˝ 1¼˝ 65 lbs. $109.99 9-7344 3½˝ 14⅛˝ 3200 1½˝ SAE 8 63½˝ 211/16˝ C 5˝ 1¼˝ 65 lbs. $129.99 9-7345 3½˝ 15˝ 3200 1½˝ SAE 8 61˝ 4˝ C 3⅞˝ 1¼˝ 65 lbs. $129.99

1½˝ x 12˝ x ¾˝

ITEM 9-7671 $69.99SPECIFICATIONS• Double acting • Retracted lgth. 19⅞˝• Bore x Stroke 1½˝ x 12˝ • Rod threaded ⅝˝-18˝• Pressure 2500 PSI max. • Base crosshole 1¾˝ w.• Rod dia. ¾˝ • Pin hole ½˝• Ports SAE 4 rod, SAE 6 base • Shpg. 10 lbs.


Fieldmate Cylinders• New, Fieldmate cylinder by Eaton Hydraulics. Supersavings on double acting hydraulic tie-rod cylinders.Fully chromed piston rod. Ideal for agricultural and mo-bile applications. Both ends are clevis. All are 3000 PSI.

ITEM Model Bore/Stroke Rod Diam. Ports R. Lgth. Outside W. Inside W.Outside W. Inside W. Shpg. Price 9-6070-2508-AG Model 2508-FMA 2½˝ x 8˝ 1⅛˝ ⅜˝ NPT 20¼˝ 2⅝˝ 1⅛˝ 2⅝˝ 1⅛˝ 24 lbs. $ 65.99 9-6070-316-AG Model 3016-FMA 3˝ x 16˝ 1½˝ ½˝ NPT 31½˝ 2⅝˝ 1⅛˝ 2⅝˝ 1⅛˝ 46 lbs. $ 84.99 9-6070-3508-AG Model 3508-FMA 3½˝ x 8˝ 1¼˝ ½˝ NPT 20¼˝ 2⅝˝ 1⅛˝ 2¾˝ 1¼˝ 32 lbs. $ 79.99 9-6070-3510 Model 3510-FM 3½˝ x 10˝ 1¼˝ ½˝ NPT 20¼˝ 2¾˝ 1¼˝ 2¾˝ 1¼˝ 38 lbs. $ 81.99 9-6070-3516-AG Model 3516-FMA 3½˝ x 16˝ 1½˝ ½˝ NPT 31½˝ 2⅝˝ 1⅛˝ 2¾˝ 1¼˝ 53 lbs. $119.99

1½˝ x 16½˝ x 1˝

ITEM 9-9141 $79.99• Retracted length measured from baseend to rod end.SPECIFICATIONS • Retracted lgth. 22⅝˝• New , double acting • Rod end threaded• Bore x Stroke 1½˝ x 16½˝ ¾-16 x 1⅛˝ long• Pressure 2500 PSI max. • Base mtg. flange• Rod dia. 1˝ four ⅜˝ holes on 4˝ ctrs.• Ports SAE 6 • Shpg. 16 lbs.

1½˝ x 32˝ x 1˝

ITEM 9-6206 $119.99• Retracted length measured from baseend to rod end.SPECIFICATIONS• New, double acting • Retracted lgth. 38½˝• Bore x Stroke 1½˝ x 32˝ • Rod end round, plain• Pressure 2500 PSI max. Lgth. past seal 2⅛˝• Rod dia. 1˝ • Base end flat O.D. 2˝• Ports SAE 8 • Shpg. 22 lbs.

2˝ x 20˝ x 1⅜˝

ITEM 9-9563 $84.95SPECIFICATIONS• New, double acting • Retracted lgth. 30⅜˝• Bore x Stroke 2˝ x 20˝ • Clevis ends• Pressure 3000 PSI max. rod 2˝ w., base 115/16˝ w.• Rod dia. 1⅜˝ • Pin holes 1˝• Ports SAE 6 • Shpg. 28 lbs.

56 Double Acting Cylinders www.surpluscenter.com8

2˝ x 18˝ x 1¼˝

ITEM 9-7708-18 $141.95SPECIFICATIONS• Brand new, double acting • Retracted lgth. 25˝• Bore x stroke 2˝ x 18˝ • Crosstube ends• Pressure 3500 PSI max. rod 1¾˝ w., base 2⅝˝ w.• Rod dia. 1¼˝ • Pin holes ¾˝• Ports SAE 8 • Shpg. 23 lbs.

2˝ x 24˝ x 1¼˝ITEM 9-7708-24 $157.95• Same as ITEM 9-7708-18 above except24˝ stroke, retracted lgth. 31˝. Shpg. 28 lbs.

2˝ x 16˝ x 1¼˝

ITEM 9-7995 $79.99SPECIFICATIONS • Ports SAE 6• New EAGLE • Retracted lgth. 24˝• Double acting • Crosstube ends• Bore x Stroke 2˝ x 16˝ rod 2¼˝ w., base 2¾˝ w.• Pressure 3000 PSI max. • Pin holes ¾˝• Rod dia. 1¼˝ • Shpg. 25 lbs.

2˝ x 5˝ x 1˝

ITEM 9-8075 $79.99• Retracted lgth. measured pin ctr. to rod end.SPECIFICATIONS • Retracted lgth. 13˝• New BAILEY • Rod end threaded• Double acting ⅝˝-18 x 1⅞˝ long• Bore x Stroke 2˝ x 5˝ • Base end tang• Pressure 3000 PSI max. w/swivel eye 1¾˝ wide• Rod dia. 1˝ Pin hole ¾˝• Ports SAE 4 • Shpg. 11 lbs.

2˝ x 24˝ x 1¼˝

ITEM 9-5950 $109.95SPECIFICATIONS • Ports SAE 4 (retract),• New, double acting SAE 6 (extend)• Bore x stroke 2˝ x 24˝ • Rod thru-hole• Pressure 2000 PSI max. • Base crosstube 3˝ wide• Rod dia. 1¼˝ • Pin holes ¾˝• Retracted lgth. 32˝ • Shpg. 26 lbs.

2˝ x 13⅛˝ x 1˝

ITEM 9-6106 $59.95SPECIFICATIONS• Double acting • Threaded rod• Bore/stroke 2˝ x 13⅛˝ metric M20 2.50• PSI 2500 max. pitch x 1⅝˝ long end• Rod diam. 1˝ • Tang base ¾˝ wide• Ports SAE 4 pin hole ⅞˝• Retracted lgth. 19¾˝ • Shpg. 14 lbs.

2˝ x 17˝ x 1¼˝

ITEM 9-7913 $69.99SPECIFICATIONS • Ports SAE 6• New, double acting • Retracted lgth. 31˝• Bore x stroke 2˝ x 17˝ • Crosstube ends 2⅝˝ wide• Pressure 2500 PSI max. • Pin holes rod 1⅜˝, base 1˝• Rod dia. 1¼˝ • Shpg. 19 lbs.

2˝ x 14˝ x 1¼˝

ITEM 9-7912 $69.99SPECIFICATIONS• New, double acting • Retracted lgth. 20⅝˝• Bore x Stroke 2˝ x 14˝ • Crosstube ends• Pressure 2500 PSI max. rod 3⅛˝ w., base 2⅞˝ w.• Rod dia. 1¼˝ • Pin holes 1˝• Ports SAE 6 • Shpg. 19 lbs.

2˝ x 19¼˝ x 1¼˝

ITEM 9-8070 $79.99SPECIFICATIONS • Ports SAE 6• New, double acting • Retracted lgth. 26⅞˝• Bore x Stroke 2˝ x 19¼˝ • Crosstube ends 2½˝ wide• Pressure 3000 PSI max. • Pin holes 1˝• Rod dia. 1¼˝ • Shpg. 23 lbs.

2˝ x 26˝ x 1˝

ITEM 9-4013 $109.50• Base port in side of end casting.SPECIFICATIONS • Retracted lgth. 35¾˝• Double acting • Rod end block 1¼˝ sq.• Bore/Stroke 2˝ x 26˝ threaded hole 7/16-14 at tip• 2000 PSI max. Pin hole ¾˝• Rod dia. 1˝ • Base 1½˝ dia. flat bottom• Ports SAE 6 • Shpg. 24 lb.

2˝ x 2½˝ x 1˝

ITEM 9-9880 $49.95SPECIFICATIONS• New, double acting • Retracted lgth. 10⅞˝• Bore x Stroke 2˝ x 2½˝ end-to-end• Pressure 2500 PSI max. • Rod end thru-hole• Rod dia. 1˝ Pin hole ⅜˝• Ports SAE 6 • Base end O.D. 2¼˝• Shpg. 9 lbs. tapped 9/16˝-12 x 1˝ deep

1½˝ x 119˝ x 1˝Extra Long Stroke Cylinder

ITEM 9-5542 $239.99• Manifold at base end includes counterbal-ance valve with adj. pressure set at 1000PSI (400-1500 PSI range) and 2 positionshuttle valve. An inline flow restrictor allowsfree flow during retraction, restricted flowduring extension.SPECIFICATIONS • Retracted lgth. 139˝• Double acting • Rod swivel eye ¾˝ w.• Bore/stroke 1½˝ x 119˝ pin hole ⅝˝• 2500 PSI • Base drilled• Rod diam. 1˝ pin hole ¾˝• Ports SAE 6 • Shpg. 100 lbs.

Truck freight only.

1½˝ x 38˝ x ¾˝

ITEM 9-7683 $89.99SPECIFICATIONS• Double acting • Retracted lgth. 53˝• Bore x Stroke 1½˝ x 38˝ • Threaded ends• Pressure 2500 PSI max. rod ¾˝-10 x 7˝• Rod dia. ¾˝ base ¾˝-10 x 2¼˝• Ports SAE 4 • Shpg. 22 lbs.

1¾˝ x 15˝ x 1½˝

ITEM 9-9265 $74.95• Two extend and two retract ports, oneset steel-plugged.SPECIFICATIONS • Ports SAE 4• New, double acting • Retracted lgth. 2215/16˝• Bore x Stroke 1¾˝ x 15˝ • Tang ends w/swivel eye 1 ̋w.• Pressure 2500 PSI max. • Pin holes 1˝• Rod dia. 1½˝ • Shpg. 22 lbs.

1¾˝ x 15½˝ x 1˝

ITEM 9-8083 $79.99SPECIFICATIONS• New, double acting • Retracted lgth. 24⅛˝• Bore x Stroke 1¾˝ x 15½˝ • Rod end crosstube 2¼˝ w.• Pressure 2500 PSI max. • Base end tang 1½˝ wide• Rod dia. 1˝ • Pin holes ¾˝• Ports SAE 6 • Shpg. 19 lbs.

2˝ x 16⅛˝ x 1¼˝

ITEM 9-8085 $79.99SPECIFICATIONS• New, double acting • Retracted lgth. 30⅞˝• Bore x Stroke 2˝ x 16⅛˝ • Rod end crosstube 2¼˝ w.• Pressure 2500 PSI max. • Base end tang 1¾˝ wide• Rod dia. 1¼˝ • Pin holes ¾˝• Ports SAE 8 • Shpg. 27 lbs.

You can find cylinderdefinitions on page 48


2¼˝ x 23⅝˝ x 1⅜˝

ITEM 9-8078 $79.99SPECIFICATIONS• New, double acting • Retracted lgth. 31˝• Bore x Stroke 2¼˝ x 23⅝˝ • Rod end crosstube 3˝ w.• Pressure 2500 PSI max. • Base end tang 2˝ wide• Rod dia. 1⅜˝ • Pin holes 1˝• Ports SAE 8 • Shpg. 34 lbs.

2¼˝ x 10¼˝ x 1⅜˝

ITEM 9-8086 $79.99SPECIFICATIONS• New, double acting • Retracted lgth. 16⅜˝• Bore x Stroke 2¼˝ x 10¼˝ • Rod end crosstube 2¾˝ w.• Pressure 2500 PSI max. • Base end crosshole 2⅝˝ w.• Rod dia. 1⅜˝ • Pin holes 1˝• Ports SAE 6 • Shpg. 28 lbs.

2˝ x 36˝ x 1¼˝


2˝ x 27˝ x 1¼˝

ITEM 9-5109 $149.50SPECIFICATIONS• New, double acting • Retracted lgth. 36¾˝• Bore x stroke 2˝ x 27˝ • Crosstube ends• Pressure 2500 PSI max. rod 1¾˝ w., base 2⅝˝ w.• Rod dia. 1¼˝ • Pin holes 1¼˝• Ports JIC 8 male • Shpg. 39 lbs.

2˝ x 30˝ x 1¼˝


2˝ x 32˝ x 1¼˝ITEM 9-7708-32 $182.95• Same as ITEM 9-7708-30 above except32˝ stroke, retracted lgth. 39˝. Shpg. 33 lbs.

2¼˝ x 16¾˝ x 1⅜˝

ITEM 9-8084 $79.99SPECIFICATIONS• New, double acting • Retracted lgth. 24⅛˝• Bore x Stroke 2¼˝ x 16¾˝ • Crosstube ends• Pressure 2500 PSI max. rod 2¾˝ w., base 2⅝˝ w.• Rod dia. 1⅜˝ • Pin holes 1˝• Ports SAE 6 • Shpg. 28 lbs.

2¼˝ x 10¾˝ x 1¼˝

ITEM 9-4945 $99.50SPECIFICATIONS• Double acting • Retracted lgth. 19¼˝• Bore/stroke 2¼˝ x 10¾˝ • Crosstube rod 115/16˝ w.• 2500 PSI • Drilled pin hole base• Rod diam. 1¼˝ • 1˝ pin holes• Ports ⅜˝M flat face O-ring • Shpg. 20 lbs.

2¼˝ x 18½˝ x 1⅜˝

ITEM 9-7914 $99.99SPECIFICATIONS • Ports SAE 6• New, double acting • Retracted lgth. 30½˝• Bore x stroke 2¼˝ x 18½˝ • Crosstube ends 2⅝˝ wide• Pressure 2500 PSI max. • Pin holes rod 1⅜˝, base 1˝• Rod dia. 1⅜˝ • Shpg. 27 lbs.

2¼˝ x 17⅛˝ x 1¼˝

ITEM 9-9952 $74.95SPECIFICATIONS• New, double acting • Retracted lgth. 25¾˝• Bore x Stroke 2¼˝ x 17⅛˝ • Crosstube ends• Pressure 3000 PSI max. rod 1⅝˝ w., base 2¾˝ w.• Rod dia. 1¼˝ • Pin holes 1⅜˝• Ports JIC 8 male • Shpg. 25 lbs.

2½˝ x 5˝ x 1¼˝

ITEM 9-7216 $59.95SPECIFICATIONS • Retracted lgth. 14¼˝• New, double acting • Rod crosstube 1½˝ w.• Bore/stroke 2½˝ x 5˝ • Base tang 1½˝ w.• PSI 3000 max. • Pin holes 1˝• Rod diam. 1¼˝ • Thread-in gland• Ports JIC 6M • Shpg. 15 lbs.

2¼˝ x 21⅛˝ x 1⅜˝

ITEM 9-8077 $79.99SPECIFICATIONS• New, double acting • Retracted lgth. 28½˝• Bore x Stroke 2¼˝ x 21⅛˝ • Rod end crosstube 3˝ w.• Pressure 2500 PSI max. • Base end tang 2˝ wide• Rod dia. 1⅜˝ • Pin holes 1˝• Ports SAE 8 • Shpg. 32 lbs.

2¼˝ x 24¼˝ x 1¼˝

ITEM 9-9760 $119.95SPECIFICATIONS• New, double acting • Retracted lgth. 35¾˝• Bore x Stroke 2¼˝ x 24¼˝ • Crosstube ends• Pressure 3000 PSI max. rod 1½˝ w., base 3˝ w.• Rod dia. 1¼˝ • Pin holes 1˝• Ports SAE 6 • Shpg. 33 lbs.

2½˝ x 5˝ x 1¼˝

ITEM 9-7826 $39.99SPECIFICATIONS• Double acting • Retracted lgth. 14¼˝• Bore x Stroke 2½˝ x 5˝ • Rod crosstube 1½˝ w.• Pressure 2500 PSI max. • Base tang 1½˝ w.• Rod dia. 1¼˝ • Pin holes 1˝• Ports JIC 6M • Shpg. 15 lbs.

2½˝ x 6˝ x 1˝

ITEM 9-7726 $79.99SPECIFICATIONS• Double acting • Retracted lgth. 13˝• Bore x stroke 2½˝ x 6˝ • Crosstube ends 3⅜˝ wide• Pressure 3000 PSI max. • Pin holes• Rod dia. 1˝ rod 1¼˝, base ¾˝• Ports ⅜˝ NPT • Shpg. 12 lbs.

2½˝ x 7˝ x 1⅛˝DA Rephasing Cylinder

ITEM 9-7478 $64.95• New, rephasing cylinder with internal ballchecks to ease cylinder start-up at bothends of stroke.SPECIFICATIONS • Threaded rod end• Double acting 1˝-16 x 1½˝ threaded• Bore x stroke 2½˝ x 7˝ 1˝ across wrench flats• Pressure 2500 PSI max. • Tapped base end• Rod dia. 1⅛˝ 2½˝ O.D.• Ports SAE 6 Tapped 1⅛˝-12 x 1¾ ̋deep• Retracted lgth. 15˝ • Shpg. 19 lbs.

’’

Retracted Length

Retracted LengthIs Measured Pin Center to Pin Center


2½˝ x 16⅛˝ x 137/64˝

ITEM 9-8088 $84.99SPECIFICATIONS • Retracted lgth. 267/8˝• New, double acting • Crosstube ends• Bore x Stroke 2½˝ x 16⅛˝ rod 3˝ w., base 3½˝ w.• Pressure 2500 PSI max. • Pin holes• Rod dia. 137/64˝ rod 1˝, base 1⅜˝• Ports SAE 8 • Shpg. 34 lbs.

2½˝ x 14˝ x 1⅛˝

ITEM 9-4174 $150.95SPECIFICATIONS • Ports ½˝ NPT• Double acting • Retracted lgth. 21½˝• Bore/stroke 2½˝ x 14˝ • Crosstube ends• 2500 PSI • 1˝ pin holes• Rod diam. 1⅛˝ • Shpg. 21 lbs.

2½˝ x 15˝ x 1½˝

ITEM 9-7679 $99.99SPECIFICATIONS • Retracted lgth. 39½˝• New, Double acting • Swivel eye ends• Bore x Stroke 2½˝ x 15˝ rod 1⅜˝ w., base 13/16˝ w.• Pressure 3000 PSI max. • Pin holes• Rod dia. 1½˝ rod 1˝, base 1¼˝• Ports SAE 6 • Shpg. 38 lbs.

2½˝ x 8.85˝ x 1½˝

ITEM 9-5941 $99.99SPECIFICATIONS • Ports SAE 4• Double acting • Retracted lgth. 16⅛˝• Bore/stroke 2½˝ x 8.85˝ • Crosstube ends 2⅞˝ w.• 3000 PSI • Pin holes 1˝• Rod diam. 1½˝ • Shpg. 20 lbs.

2½˝ x 10˝ x 1¼˝

ITEM 9-5942 $119.50SPECIFICATIONS• Double acting • Retracted lgth. 20˝• Bore/stroke 2½˝ x 10˝ • Clevis rod ¾˝ wide• 2500 PSI • Base tang 1¼˝ wide• Rod diam. 1¼˝ • Pin holes 1˝• Ports SAE 6 • Shpg. 23 lbs.

2½˝ x 8¾˝ x 1½˝

ITEM 9-8071 $109.95• Removable 0.078˝ orifice plate in extendport.SPECIFICATIONS• New, double acting • Retracted lgth. 19¾˝• Bore x stroke 2½˝ x 8¾˝ • Crosstube ends• Pressure 3000 PSI max. rod 2¼˝ w., base 3¼˝ w.• Rod dia. 1½˝ • Pin holes 1⅛˝• Ports SAE 8 (see above) • Shpg. 23 lbs.

2½˝ x 8¾˝ x 1½˝

ITEM 9-8072 $109.95• Removable 0.078˝ orifice plate in extendport.SPECIFICATIONS• New, double acting • Retracted lgth. 19¾˝• Bore x stroke 2½˝ x 8¾˝ • Crosstube ends• Pressure 3000 PSI max. rod 2¼˝ w., base 3¼˝ w.• Rod dia. 1½˝ • Pin holes 1⅛˝• Ports SAE 8 (see above) • Shpg. 23 lbs.

2½˝ x 15˝ x 1½˝

ITEM 9-9285 $89.95SPECIFICATIONS• New, double acting • Retracted lgth. 24˝• Bore x Stroke 2½˝ x 15˝ • Thru-hole ends O.D. 1½˝• Pressure 2500 PSI max. • Pin holes ¾˝• Rod dia. 1½˝ • Superficial rust• Ports SAE 6 • Shpg. 29 lbs.

2½˝ x 10˝ x 1½˝

ITEM 9-9884 $89.95• Retracted length measured from bottomof base to rod end.SPECIFICATIONS • Rod threaded w/thru-hole• New, double acting 1¼-12 x 23/16˝ long• Bore x Stroke 2½˝ x 10˝ Thru hole dia. 3/16˝• Pressure 3000 PSI max. • Base end plate• Rod dia. 1½˝ 815/16˝ lgth. x 3¼˝ wide• Ports ½˝ NPT & ¾˝ NPT four 9/16˝ holesextend, ⅜˝ NPT retract on 7½˝ x 2˝ ctrs.

• Retracted lgth. 18˝ • Shpg. 24 lbs.

2½˝ x 15˝ x 1˝

ITEM 9-9207 $74.95SPECIFICATIONS• New AGCO • Ports SAE 6• Double acting • Retracted lgth. 28¼˝• Bore x Stroke 2½˝ x 15˝ • Clevis ends 115/16˝ wide• Pressure 3000 PSI max. • Pin holes 1˝• Rod dia. 1˝ • Shpg. 27 lbs.

2½˝ x 8˝ x 11/16˝

ITEM 9-9434 $59.95SPECIFICATIONS • Ports ⅜˝ NPT• New, double acting • Retracted lgth. 20¼˝• Bore x Stroke 2½˝ x 8˝ • Clevis ends 211/16˝ wide• Pressure 2500 PSI max. • Pin holes 1˝• Rod dia. 11/16˝ • Shpg. 24 lbs.

2½˝ x 7⅜˝ x 1˝

ITEM 9-7251 $69.95SPECIFICATIONS • Retracted lgth. 12¼˝• Double acting • Rod end ⅝-18 internal• Bore/stroke 2½˝ x 7⅜˝ tapped w/wrench flats• 1200 PSI max. • Base plain• Rod diam. 1˝ outer width 2⅞˝• Ports SAE 6 • Shpg. 13 lbs.

2½˝ x 7˝ x 13/16˝

ITEM 9-5207 $79.95SPECIFICATIONS • Ports ¼˝ NPTM• Nw, double acting swivel hose connection• Bore x stroke 2½˝ x 7˝ • Tang ends• Pressure 2500 PSI max. rod 1⅝˝ w., base 1¾˝ w.• Rod dia. 13/16˝ • Pin holes 13/16˝• Retracted lgth. 18¼˝ • Shpg. 24 lbs.

2½˝ x 16 x 1¼˝

ITEM 9-9179 $79.95SPECIFICATIONS • Ports SAE 6• New, double acting • Retracted lgth. 26¼˝• Bore x Stroke 2½˝ x 16˝ • Clevis ends 2⅛˝ w.• Pressure 3000 PSI max. • Pin holes 1˝• Rod dia. 1¼˝ • Shpg. 24 lbs.

2½˝ x 16˝ x 1½˝

ITEM 9-7024 $99.99SPECIFICATIONS • Retracted lgth. 25¼˝• Double acting • Rod pinhole 2½˝ from body• Bore/stroke 2½˝ x 16˝ • Base pinhole 1¼˝ from body• 2500 PSI • Base extension 1½˝ diam• Rod diam. 1½˝ • Pin holes ¾˝• Ports ¼˝ NPT • Shpg. 26 lbs.

2½˝ x 16˝ x 1½˝

ITEM 9-5123 $129.99SPECIFICATIONS• Double acting • Retracted lgth. 29˝• Bore/stroke 2½˝ x 16˝ • Rod crosstube 3¼˝ wide• 3200 PSI • Base 2⅞˝ wide• Rod diam. 1½˝ • Pin holes 1˝• Ports SAE 8 • Shpg. 32 lbs.

2½˝ x 15.64˝ x 1˝

ITEM 9-9230 $69.95SPECIFICATIONS • Ports JIC 6 MALE• New AGCO • Retracted lgth. 23⅝˝• Double acting • Rod crosstube 111/16˝ w.• Bore x Stroke 2½˝ x 15.64˝ • Base thru-hole O.D. 2⅞˝• Pressure 1500 PSI max. • Pin holes 1˝• Rod dia. 1˝ • Shpg. 26 lbs.

You can find cylinderdefinitions on page 48


2½˝ x 16¾˝ x 137/64˝

ITEM 9-8079 $84.99SPECIFICATIONS• New, double acting • Retracted lgth. 24¼˝• Bore x Stroke 2½˝ x 16¾˝ • Crosstube ends• Pressure 2500 PSI max. rod 3½˝ w., base 2⅞˝ w.• Rod dia. 137/64˝ • Pin holes 1˝• Ports SAE 6 • Shpg. 35 lbs.

2½˝ x 17˝ x 1¼˝

ITEM 9-5451 $112.50SPECIFICATIONS• Double acting • Retracted lgth. 46½˝• Bore/stroke 2½˝ x 17˝ • Crosstube ends• 3200 PSI rod 2¾˝ w., base 4½˝ w.• Rod diam. 1¼˝ • Pin holes 1¼˝• Ports SAE 8 • Shpg. 39 lbs.

2½˝ x 16⅝˝ x 1½˝

ITEM 9-7416 $89.95• Ports parallel to pins, facing each other.SPECIFICATIONS• New, double acting • Retracted lgth. 35⅞˝• Bore/stroke 2½˝ x 16⅝˝ • Rod crosstube 3¼˝ wide• PSI 3200 max. • Base thru-hole 2⅞˝ OD• Rod diam. 1½˝ • Pin holes 1˝• Ports SAE 8 • Shpg. 36 lbs.

2½˝ x 17˝ x 1˝

ITEM 9-9546 $79.95SPECIFICATIONS • Ports SAE 6• New AGCO • Retracted lgth. 28¼˝• Double acting • Clevis ends• Bore x Stroke 2½˝ x 17˝ rod 115/16˝ w., base 2˝ w.• Pressure 3000 PSI max. • Pin holes 1˝• Rod dia. 1˝ • Shpg. 27 lbs.

2¾˝ x 3½˝ x 1⅛˝

ITEM 9-9809 $39.95• Retracted length measured from rod endto pin center.SPECIFICATIONS • Rod end stepped• New ENERGY w/threaded end• Double acting 1st section 1⅛˝ dia. x 8¾˝• Bore x Stroke 2¾˝ x 3½˝ 2nd section ¾˝ dia. x 6⅜˝• Pressure 1500 PSI max. Threaded sec. ¾-16 x 1⅝˝• Rod dia. 1⅛˝ & ¾˝ Overall rod lgth. 16¾˝• Ports ½˝ NPT • Base end clevis 2⅜˝ wideF/M extend/retract Pin hole 1˝• Retracted lgth. 26¾˝ • Shpg. 18 lbs.

2⅝˝ x 15˝ x 1½˝

ITEM 9-7025 $99.99SPECIFICATIONS • Retracted lgth. 24˝• Double acting • Rod pinhole 2¾˝ from body• Bore/stroke 2⅝˝ x 15˝ • Base pinhole 1¼˝ from body• 2500 PSI • Base extension 1½˝ diam• Rod diam. 1½˝ • Pin holes ¾˝• Ports SAE 6 • Shpg. 30 lbs.

2½˝ x 20¼˝ x 1¼˝

ITEM 9-5124 $149.99SPECIFICATIONS• Double acting • Retracted lgth. 28¼˝• Bore/stroke 2½˝ x 20¼˝ • Crosstube ends• 3200 PSI rod 4⅝˝w., base 3¼˝w.• Rod diam. 1¼˝ • Pin holes 11/16˝• Ports SAE 8 • Shpg. 31 lbs.

2½˝ x 18˝ x 17/16˝

ITEM 9-6119 $139.95SPECIFICATIONS• Double acting • Retracted lgth. 28½˝• Bore/stroke 2½˝ x 18˝ • Tang ends 2½˝ wide• PSI 2500 max. • Pin holes• Rod diam. 17/16˝ rod 15/16˝, base 23/16˝• Ports SAE 8 • Shpg. 36 lbs.

2½˝ x 24˝ x 1¼˝

ITEM 9-7959 $109.99SPECIFICATIONS • Ports SAE 4• New, FISHER HYDRAULICS• Retracted lgth. 36˝• Double acting • Crosstube ends• Bore x Stroke 2½˝ x 24˝ rod 317/32˝ w., base 4˝ w.• Pressure 3000 PSI max. • Pin holes 1˝• Rod dia. 1¼˝ • Shpg. 32 lbs.

2½˝ x 24˝ x 1½˝

ITEM 9-5576 $109.99SPECIFICATIONS • Retracted lgth. 50¼˝• New, double acting • Rod crosstube 2¾˝ wide• Bore x stroke 2½˝ x 24˝ pin hole 1½˝• Pressure 2500 PSI max. • Base tang 1½˝ wide• Rod dia. 1½˝ pin hole 2⅜˝• Ports SAE 8 • Shpg. 62 lbs.

ITEM 9-7696 $159.99• Same as ITEM 9-5576 above except3000 PSI.

2½˝ x 20˝ x 1¼˝

ITEM 9-9872 $49.95• Unused, old inventory, superficial rust.SPECIFICATIONS• Double acting • Retracted lgth. 30˝• Bore x stroke 2½˝ x 20˝ • Rod crosstube 1¾˝ w.• Pressure 3000 PSI max. • Base end tang 2˝ wide• Rod dia. 1¼˝ • Pin holes 1.23˝ actual I.D.• Ports SAE 6 • Shpg. 27 lbs.

2½˝ x 24˝ x 137/64˝

ITEM 9-8081 $89.99SPECIFICATIONS• New, double acting • Retracted lgth. 35˝• Bore x Stroke 2½˝ x 24˝ • Rod end crosstube 3˝ w.• Pressure 2500 PSI max. • Base end tang 2˝ wide• Rod dia. 137/64˝ • Pin holes 1˝• Ports SAE 8 • Shpg. 48 lbs.

2½˝ x 20⅛˝ x 137/64˝

ITEM 9-8080 $89.99SPECIFICATIONS• New, double acting • Retracted lgth. 295/16˝• Bore x Stroke 2½˝ x 20⅛˝ • Rod end crosstube 3˝ w.• Pressure 2500 PSI max. • Base end tang 1½˝ wide• Rod dia. 137/64˝ • Pin holes 1˝• Ports SAE 8 • Shpg. 39 lbs.

2¾˝ x 6½˝ x 1⅜˝

ITEM 9-5208 $59.95SPECIFICATIONS• New, double acting • Ports ¼˝ NPT requires• Bore x stroke 2¾˝ x 6½˝ swivel or hose w/ flare• Pressure 2500 PSI max. • Tang ends 1¾˝ wide• Rod dia. 1⅜˝ • Pin holes 1⅜˝• Retracted lgth. 17¾˝ • Shpg. 30 lbs.

2¾˝ x 12˝ x 1¼˝

ITEM 9-5380 $89.50SPECIFICATIONS • Ports SAE 6• New, double acting • Retracted lgth. 22⅛˝• Bore x stroke 2¾˝ x 12˝ • Clevis ends 25/16˝ wide• Pressure 2500 PSI max. • Pin holes 1˝• Rod dia. 1¼˝ • Shpg. 24 lbs.

2¾˝ x 6¼˝ x 1¼˝

ITEM 9-4709 $49.99SPECIFICATIONS• New, double acting • Retracted lgth. 15˝• Bore x stroke 2¾˝ x 6¼˝ • Rod threaded• Pressure 2500 PSI max. 1⅛-12 x 1⅝˝ long• Rod dia. 1¼˝ • Base clevis 2¾˝ wide• Ports SAE 4 (retract), Pin hole 1⅛˝SAE 6 (extend) • Shpg. 23 lbs.

ITEM 9-4709-A $49.99• Similar to ITEM 9-4709 above exceptports SAE 6. Rod end port rotated 90°from rear pin. No extension on rear port.



3˝ x 16˝ x 1½˝

ITEM 9-9463 $139.95SPECIFICATIONS • Ports SAE 6• New AGCO • Retracted lgth. 28¼˝• Double acting • Clevis ends• Bore x Stroke 3˝ x 16˝ rod 213/16˝ w., base 1⅞˝ w.• Pressure 3000 PSI max. • Pin holes 1˝• Rod dia. 1½˝ • Shpg. 46 lbs.

3˝ x 15¾˝ x 1½˝

ITEM 9-9077 $134.95SPECIFICATIONS• New AG-CHEM • Ports SAE 6• Double acting • Retracted lgth. 26½˝• Bore x Stroke 3˝ x 15¾˝ • Clevis ends 2⅛˝ wide• Pressure 3000 PSI max. • Pin holes 1˝• Rod dia. 1½˝ • Shpg. 30 lbs.

3˝ x 12˝ x 1¼˝

ITEM 9-9147 $79.95SPECIFICATIONS • Ports ½˝ NPT• New CHIEF • Retracted lgth. 22¼˝• Double acting • Clevis ends• Bore x Stroke 3˝ x 12˝ rod 2.717˝ w., base 2.5˝ w.• Pressure 2500 PSI max • Pin holes 1˝• Rod dia. 1¼˝ • Shpg. 34 lbs.

3˝ x 12˝ x 1⅛˝

ITEM 9-1375 $69.99• Unused, old inventory.SPECIFICATIONS • Retracted lgth. 24¼˝• Double acting • Rod end thru-hole• Bore x stroke 3˝ x 12˝ Pin hole ½˝• Pressure 2500 PSI max. • Base clevis 2⅛˝ wide• Rod dia. 1⅛˝ Pin hole 1˝• Ports SAE 6 • Shpg. 24 lbs.

3˝ x 6⅛˝ x 1½˝

ITEM 9-2191 $76.50SPECIFICATIONS • Ports SAE 8• Double acting • Retracted lgth. 21¾˝• Bore/stroke 3˝ x 6⅛˝ • 1⅜˝ self aligning• 2500 PSI single eye both ends• Rod diam. 1½˝ • Shpg. 45 lbs.

3˝ x 8˝ x 1¾˝

ITEM 9-5460 $44.95SPECIFICATIONS • Ports SAE 8• Double acting • Retracted lgth. 16˝• Bore/stroke 3˝ x 8˝ • Crosstube ends• 3000 PSI • Pins 1˝• Rod diam. 1¾˝ • Shpg. 26 lbs.

ITEM 9-5460-A $44.95• Same as ITEM 9-5460 above except re-tracted lgth. 18˝. Shpg. 28 lbs.

ITEM 9-5460-B $44.95• Same as ITEM 9-5460 above exceptports ½˝ NPT.

3˝ x 6¾˝ x 1¼˝

ITEM 9-9873 $79.95SPECIFICATIONS• New, double acting • Retracted lgth. 17¼˝• Bore x Stroke 3˝ x 6¾˝ • Tang ends w/swivel eye• Pressure 2500 PSI max. tang ⅞˝ wide• Rod dia. 1¼˝ • Pin holes 1˝• Ports SAE 6 • Shpg. 20 lbs.

2¾˝ x 20˝ x 1¼˝

ITEM 9-9186 $99.95• Nitro-Bar rod for improved corrosion re-sistance.SPECIFICATIONS • Ports SAE 6• New, double acting • Retracted lgth. 33⅜˝• Bore x Stroke 2¾˝ x 20˝ • Clevis ends 1¾˝ wide• Pressure 2500 PSI max. • Pin holes 1˝• Rod dia. 1¼˝ • Shpg. 30 lbs.

2¾˝ x 18⅞˝ x 1½˝

ITEM 9-7721 $89.99SPECIFICATIONS• Double acting • Retracted lgth. 28˝• Bore x Stroke 2¾˝ x 18⅞˝ • Crosstube ends• Pressure 3000 PSI max. rod 2¾˝ w., base 2⅞˝ w.• Rod dia. 1½˝ • Pin holes 1¼˝• Ports SAE 8 • Shpg. 41 lbs.

2¾˝ x 17⅝˝ x 1½˝

ITEM 9-6366 $129.95SPECIFICATIONS• Double acting • Retracted lgth. 40⅝˝• Bore/stroke 2¾˝ x 17⅝˝ • Crosstube ends• 2500 PSI max. rod 1¾˝ w., base 3˝ w.• Rod diam. 1½˝ • Pin holes 1⅛˝• Ports SAE 8 • Shpg. 41 lbs.

3˝ x 24˝ x 1¾˝

ITEM 9-9398 $139.95SPECIFICATIONS • Retracted lgth. 35¾˝• New, double acting • Rod end• Bore x Stroke 3˝ x 24˝ thread-on clevis 2¾˝ wide• Pressure 3000 PSI • Base end clevis 2½˝ wide• Rod dia. 1¾˝ • Pin holes 1˝• Ports ½˝ NPT • Shpg. 53 lbs.

3˝ x 27¾˝ x 1½˝

ITEM 9-9761 $149.99SPECIFICATIONS• New, double acting • Retracted lgth. 35⅜˝• Bore x Stroke 3˝ x 27¾˝ • Crosstube ends• Pressure 2500 PSI max. rod 2½˝ w., base 3½˝ w.• Rod dia. 1½˝ • Pin holes ⅞˝• Ports SAE 8 • Shpg. 41 lbs.

3˝ x 20˝ x 1¾˝

ITEM 9-7551 $139.95• Transfer tube, both ports at base end.SPECIFICATIONS• New, double acting • Retracted lgth. 37½˝• Bore x stroke 3˝ x 20˝ • Crosstube rod 2½˝ w.• Pressure 3000 PSI max. • Tang base 1½˝ thick• Rod dia. 1¾˝ • Pin holes 1½˝• Ports SAE 8 • Shpg. 59 lbs.

3˝ x 19½˝ x 1½˝

ITEM 9-4789 $99.50SPECIFICATIONS • Ports SAE 12• New, double acting • Retracted lgth. 34˝• Bore x stroke 3˝ x 19½˝ • Clevis ends 3¾˝ w.• Pressure 2500 PSI max. • Pin holes 1¾˝• Rod dia. 1½˝ • Shpg. 78 lbs.

3˝ x 17⅞˝ x 1½˝

SPECIFICATIONS• New, double acting • Retracted lgth. 271/16˝• Bore x Stroke 3˝ x 17⅞˝ • Rod crosstube 2⅜˝ w.• Pressure 3000 PSI max. • Base end tang 2˝ wide• Rod dia. 1½˝ • Pin holes 1¼˝• Ports SAE 8 • Shpg. 50 lbs.

ITEM 9-9628-L $119.95• VOLVO Construction Equip. #5750723.

ITEM 9-9628-R $119.95• VOLVO Construction Equip.#5750313.

2¾˝ x 16˝ x 1⅛˝

ITEM 9-6790-A $119.95SPECIFICATIONS• Double acting • Retracted lgth. 27˝• Bore/stroke 2¾˝ x 16˝ • Rod threaded ¾˝-16• 2500 PSI max. • Base end width 1⅜˝• Rod diam. 1⅛˝ ⅞˝ pin hole• Ports SAE 6 • Shpg. 26 lbs.

You can findcylinder definitions

on page 48

3½˝ x 4˝ x 1¾˝

ITEM 9-9190 $69.95SPECIFICATIONS • Ports ½˝ NPT• New HERCULES • Retracted lgth. 14¼˝• Double acting • Clevis ends• Bore x Stroke 3½˝ x 4˝ rod 2⅛˝ w., base 21/16˝ w.• Pressure 3000 PSI max. • Pin holes 1˝• Rod dia. 1¾˝ • Shpg. 30 lbs.

3½˝ x 5½˝ x 1¾˝

ITEM 9-2257 $69.50SPECIFICATIONS• Double acting • Ports SAE 10• Bore/stroke 3½˝ x 5½˝ • Retracted lgth. 20¾˝• 3500 PSI • 1¾˝ pin holes clevis ends• Rod diam. 1¾˝ • Shpg. 49 lbs.


3¼˝ x 5⅝˝ x 1¼˝

ITEM 9-5858 $54.99SPECIFICATIONS• Double acting rephasing • Retracted lgth. 15½˝• Bore/stroke 3¼˝ x 5⅝˝ • Rod 1˝ diam. swivel• 2500 PSI • Clevis base 1⅛˝ wide• Rod diam. 1¼˝ pin 1˝• Ports SAE 6 • Shpg. 28 lbs.

3¼˝ x 24˝ x 1¾˝DA Hyd. Cylinder w/ Mounts

ITEM 9-10071 $189.95• Cushions at both ends of stroke. Shipswith two steel foot mounts, pins and clips.SPECIFICATIONS• New VICKERS • Rod dia. 1¾˝• Double acting • Ports ¾˝ NPT• Bore x Stroke 3¼˝ x 24˝ • Retracted lgth. 37¾˝• Pressure 3000 PSI max. • Shpg. 130 lbs.• Rod thread-on clevis 41/32 ̋w. • Base end clevis 3˝ widePin hole 1⅜˝ Pin hole 1˝Foot mount bolt holes Foot mount bolt holesfour 0.65˝ on 313/16˝ sq. ctrs. four 0.65˝ on 3¼˝ sq. ctrs.

3˝ x 30˝ x 1⅛˝

ITEM 968-30 $200.95SPECIFICATIONS • Ports ½˝ NPT• Brand new, double acting • Retracted lgth. 40¼˝• Bore/stroke 3˝ x 30˝ • Clevis ends 1⅞˝ wide• 2500 PSI max • Pin holes 1˝• Rod dia. 1⅛˝ • Shpg. 37 lbs.

3¼˝ x 15˝ x 1½˝

ITEM 9-2125 $59.50SPECIFICATIONS• Used, double acting • Ports SAE 8• Bore/stroke 3¼˝ x 15˝ • Retracted lgth. 26½˝• 3000 PSI • 1½˝ pin holes• Rod diam. 1½˝ • Shpg. 48 lbs.

3¼˝ x 8˝ x 19/16˝

ITEM 9-5209 $59.95SPECIFICATIONS • Ports ¼˝ NPT• New, double acting • Retracted lgth. 19½˝• Bore x stroke 3¼˝ x 8˝ • Tang ends 1¾˝ wide• Pressure 2500 PSI max. • Pin holes 1⅜˝• Rod dia. 19/16˝ • Shpg. 35 lbs.

3¼˝ x 15¾˝ x 1½˝

ITEM 9-2126 $99.50SPECIFICATIONS• Double acting • Ports SAE 8• Bore/stroke 3¼˝ x 15¾˝ • Retracted lgth. 26¼˝• 3000 PSI • 1½˝ pin holes• Rod diam. 1½˝ • Shpg. 46 lbs.

3˝ x 30˝ x 1¼˝

ITEM 9-7218 $139.95SPECIFICATIONS• New, double acting • Rod crosstube 3½˝ wide• Bore/stroke 3˝ x 30˝ pin hole 1˝• 2500 PSI max. • Base end tapped hole• Rod diam. 1¼˝ 9/16˝-12 hole 1¼˝ deep• Ports SAE 4 • Thread-in gland• Retracted lgth. 58˝ • Shpg. 64 lbs.

3˝ x 42˝ x 1½˝

ITEM 9-6780 $259.95SPECIFICATIONS• Double acting • Ret. port #8 O-ring face seal• Bore/stroke 3˝ x 42˝ • Retracted lgth. 55½˝• PSI 3000 max. • Crosstube ends• Rod diam. 1½˝ rod 2¾˝ w., base 3⅝˝ w.• Gland O.D. 4˝ • Pin hole 1⅜˝• Extension port SAE 10 • Shpg. 85 lbs.

3˝ x 36˝ x 2˝

ITEM 9-5749 $199.50• Built-in counterbalance valve.SPECIFICATIONS • Ports SAE 6• New, double acting • Retracted lgth. 50¼˝• Bore x stroke 3˝ x 36˝ • Clevis ends 2⅜˝ wide• Pressure 2500 PSI max. • Pin holes 1¼˝• Rod dia. 2˝ • Shpg. 115 lbs.

3˝ x 44˝ x 2˝

ITEM 9-7730 $149.99SPECIFICATIONS • Ports SAE 8• New, AURELIUS MFG. • Retracted lgth. 51˝• Double acting • Crosstube ends• Bore x Stroke 3˝ x 44˝ rod 2¾˝ w., base 3½˝ w.• Pressure 2500 PSI max. • Pin holes 1½˝• Rod dia. 2˝ • Shpg. 82 lbs.

3¼˝ x 15˝ x 1½˝

ITEM 9-9181 $129.95SPECIFICATIONS• New, double acting • Retracted lgth. 30.75˝• Bore x Stroke 3¼˝ x 15˝ • Rod tang w/swivel-eye ⅞ ̋w.• Pressure 2500 PSI max. • Base end clevis 215/16˝ w.• Rod dia. 1½˝ • Pin holes 1˝• Ports SAE 8 • Shpg. 35 lbs.

3¼˝ x 7½˝ x 1½˝

ITEM 9-9505 $89.95• Two retract ports, one faces rod end, onefaces base end.SPECIFICATIONS• New, double acting • Retracted lgth. 21⅞˝• Bore x Stroke 3¼˝ x 7½˝ • Tang ends w/swivel eye• Pressure 3000 PSI max. rod 2˝ w., base 2¾˝ w.• Rod dia. 1½˝ • Pin holes 1½˝• Ports SAE 8 • Shpg. 58 lbs.

3¼˝ x 16˝ x 1¼˝

ITEM 9-10074 $119.95• Four bleeder valves installed in barrel,two at each end. Nitro-Bar rod.SPECIFICATIONS• New, double acting • Retracted lgth. 29⅛˝• Bore x Stroke 3¼˝ x 16˝ • Rod thread-on clevis 2¾˝ w.• Pressure 3000 PSI max. • Base end clevis 2¾˝ w.• Rod dia. 1¼˝ • Pin holes 1˝• Ports SAE 6 • Shpg. 37 lbs.

3½˝ x 2˝ x 1⅜˝

ITEM 9-9656$89.95

• Two mounting holes in gland end-captapped 5/16-18 on 2¾˝ B.C. Retractedlength measured base end to rod end.Ports in edge of base.SPECIFICATIONS• New, S-P MFG. Corp. • Rod end threaded• Double acting ⅞-14 x 1⅞˝ long• Bore x Stroke 3½˝ x 2˝ • Base end round plate• Pressure 2000 PSI max. O.D. 6¼˝• Rod dia. 1⅜˝ Mtg. holes three ⅜˝• Ports ¼˝ NPT on 5½˝ B.C.• Retracted lgth. 9⅛˝ • Shpg. 30 lbs.

’’

Retracted Length


3½˝ x 15˝ x 1½˝

ITEM 9-5733-A $129.95SPECIFICATIONS • Rod diam. 1½˝• Double acting • Retracted lgth. 26¾˝• Bore/stroke 3½˝ x 15˝ • Single eye rod• 2500 PSI pin hole 213/16˝• Ports 2 bolt manifold • Crosstube base 415/16˝ w.with ⅛˝ auxiliary ports pin holes 1¾˝(manifold not available) • Shpg. 51 lbs.

3½˝ x 10˝ x 1½˝

ITEM 9-9610 $54.95• Unused, old inventory. Welded hydrauliccylinder. Rod wipers are brittle. Thru-holein rod passes rod wiper. Retracted lengthmeasured from end to end.SPECIFICATIONS• Double acting • Rod threaded w/thru-hole• Bore x Stroke 3½˝ x 10˝ 1⅛-12 x 1⅝˝ long• Pressure 2500 PSI max. Pin hole 5/16˝• Rod dia. 1½˝ • Base end threaded stud• Ports ¼˝ NPT 1⅛-12 x 1½˝ long• Retracted lgth. 18¾˝ • Shpg. 32 lbs.


3½˝ x 19˝ x 1¾˝

ITEM 9-7583 $159.99SPECIFICATIONS• Double acting • Retracted lgth. 33⅝˝• Bore x Stroke 3½˝ x 19˝ • Rod crosstube 4⅛˝ w.• Pressure 3000 PSI max. • Base swivel 1¾˝ w.• Rod dia. 1¾˝ • Pin holes 1¾˝• Ports SAE 8 • Shpg. 93 lbs.

3½˝ x 22˝ x 1¾˝

ITEM 9-5611 $139.99SPECIFICATIONS • Ports SAE 8• Double acting • Retracted lgth. 34¼˝• Bore/stroke 3½˝ x 22˝ • Swivel eye ends• 2500 PSI • Pin holes 1¼˝• Rod diam. 1¾˝ • Shpg. 63 lbs.

3½˝ x 28˝ x 1¾˝

ITEM 9-5612 $149.99SPECIFICATIONS• Double acting • Retracted lgth. 39¾˝• Bore/stroke 3½˝ x 28˝ • Tang rod w/swivel eye• 2500 PSI • Tang base 1˝ x 3½˝• Rod diam. 1¾˝ • Pin holes 1¼˝• Ports ½˝ NPT • Shpg. 73 lbs.

3½˝ x 18¾˝ x 1¾˝

ITEM 9-7586 $159.99• New. Ports at base end.SPECIFICATIONS • Retracted lgth. 311/16˝• Double acting • Crosstube rod 4⅛˝ wide• Bore x stroke 3½˝ x 18¾˝ • Base tang 4¾˝ wide• Pressure 3000 PSI max. with swivel ball• Rod dia. 1¾˝ • Pin holes 1¾˝• Ports SAE 8 • Shpg. 80 lbs.

3½˝ x 30˝ x 2˝Hyd Cyl w/ Flange Mount

ITEM 9-10078 $259.95• Retracted length is measured from baseend to end of rod.SPECIFICATIONS• New, double acting • Rod end two thru-holes• Bore x Stroke 3½˝ x 30˝ Pin hole 1: dia. 1˝• Pressure 3000 PSI max. Pin hole 2: dia. ½˝• Rod dia. 2˝ • Base flange• Ports ⅜˝ NPT 7½˝ sq. x ¾˝ thick• Retracted lgth. 39˝ overall 4 holes ½˝ dia. on• Shpg. 89 lbs. 5.75˝ sq. ctrs.

3½˝ x 20˝ x 1⅜˝

ITEM 9-7731 $129.99SPECIFICATIONS• Double acting • Retracted lgth. 34¼˝• Bore x stroke 3½˝ x 20˝ • Clevis ends• Pressure 3000 PSI max. rod 27/16˝ w., base 2⅞˝ w.• Rod dia. 1⅜˝ • Pin holes 1˝• Ports SAE 8 • Shpg. 48 lbs.

3½˝ x 8˝ x 2˝

ITEM 9-5461 $49.95SPECIFICATIONS • Ports SAE 8• Double acting • Retracted lgth. 16˝• Bore/stroke 3½˝ x 8˝ • Crosstube ends• 3000 PSI • Pins 1˝• Rod diam. 2˝ • Shpg. 35 lbs.

3½˝ x 6˝ x 1½˝

ITEM 9-9510 $129.95• Transfer tube, both ports at base end.SPECIFICATIONS • Ports SAE 4• New, double acting • Retracted lgth. 15½˝• Bore x Stroke 3½˝ x 6˝ • Crosstube ends 4¼˝ wide• Pressure 3000 PSI max. • Pin holes 1¼˝• Rod dia. 1½˝ • Shpg. 31 lbs.

3½˝ x 30˝ x 2˝

ITEM 9-9187 $249.95• Two thru-holes in rod 2˝ apart on center.SPECIFICATIONS • Retracted lgth. 383/8˝• New, double acting • Rod end thru-hole• Bore x Stroke 3½˝ x 30˝ Pin hole 1˝ & ½˝• Pressure 3000 PSI max. • Base crosstube 413/16˝ w.• Rod dia. 2˝ Pin hole 1˝• Ports ⅜˝ NPT • Shpg. 83 lbs.

4˝ x 8˝ x 2¼˝

ITEM 9-5462 $49.95SPECIFICATIONS • Ports SAE 8• Double acting • Retracted lgth. 19˝• Bore/stroke 4˝ x 8˝ • Crosstube ends• 3000 PSI • Pins 1¼˝• Rod diam. 2¼˝ • Shpg. 52 lbs.

3⅝˝ x 20½˝ x 1½˝

ITEM 9-5733 $149.99• Ports on rod end.SPECIFICATIONS • Retracted lgth. 33½˝• New, double acting • Rod tang w/swivel eye• Bore x stroke 3⅝˝ x 20½˝ 1½˝ w.• Pressure 2500 PSI max. • Base crosstube 413/16˝ w.• Rod dia. 1½˝ • Pin holes 1¾˝• Ports ¼˝ NPT • Shpg. 59 lbs.

3½˝ x 36˝ x 2˝

ITEM 9-9847 $259.95• Superficial rust. Ports face each other.SPECIFICATIONS • Rod dia. 2˝• New, double acting • Retracted lgth. 44˝• Bore x Stroke 3½˝ x 36˝ • Rod end thru-hole O.D. 2˝• Pressure 3000 PSI max. • Base end crosstube 4˝ w.• Ports • Pin holes 1¼˝SAE 8 extend, SAE 4 retract • Shpg. 84 lbs.

3½˝ x 40˝ x 1¾˝

ITEM 9-10197 $284.95SPECIFICATIONS • Ports ½˝ NPT• New, HERCULES • Retracted lgth. 50˝• Double acting • Crosstube ends• Bore x Stroke 3½˝ x 40˝ rod 2¼˝ w., base 4¼˝ w.• Pressure 3000 PSI max. • Pin holes 1¼˝• Rod dia. 1¾˝ • Shpg. 84 lbs.

’’

Retracted Length


4˝ x 26˝ x 2½˝

ITEM 9-10000 $309.95• New GALBREATH #D40HB-1-26 . Steelmounting flange at rod end of cylinderbody measures 8⅛˝ square x ¾˝ thick. Four¾˝ mounting holes on 5˝ square centers.Transfer tube, ports at base end. Retractedlength measured base end to pin center.SPECIFICATIONS• Double acting • Retracted lgth. 35⅝˝• Bore x Stroke 4˝ x 26˝ • Rod end thru-hole 2½˝ w.• Pressure 3000 PSI max. Pin Hole 1˝• Rod dia. 2½˝ • Base end flat O.D. 4⅝˝• Ports ½˝ NPT • Shpg. 114 lbs.

4˝ x 24˝ x 2˝Log Splitter Cylinder

ITEM 9-6890 $249.95• Brand new, MONARCH INDUSTRIES.Ideal for log splitter applications.SPECIFICATIONS• Double acting • Retracted lgth. 3215/16˝• Bore/stroke 4˝ x 24˝ • Rod thru-hole• 3000 PSI max. • Base tang 1½˝ w.• Rod diam. 2˝ • Pin holes 1˝• Ports SAE 8 • Shpg. 71 lbs.

4˝ x 23½˝ x 2˝

ITEM 9-9462 $209.95• Ports at base end facing base end.SPECIFICATIONS • Retracted lgth. 33¾˝• New, double acting • Rod end crosstube 2˝ w.• Bore x Stroke 4˝ x 23½˝ Pin hole 1½˝• Pressure 3000 PSI max. • Base end tang 2˝ wide• Rod dia. 2˝ Pin hole 1¾˝• Ports ⅜˝ NPT • Shpg. 80 lbs.


4˝ x 20˝ x 1¼˝

ITEM 9-7997 $119.99SPECIFICATIONS• New, EAGLE HYDRAULICS • Ports ½˝ NPT• Double acting tie rod • Retracted lgth. 30¼˝• Bore x Stroke 4˝ x 20˝ • Clevis ends 2⅝˝ w.• Pressure 2500 PSI • Pin diam. 1˝• Rod dia. 1¼˝ • Shpg. 56 lbs.

4˝ x 16˝ x 1¼˝

ITEM 9-7996 $114.99SPECIFICATIONS• New, EAGLE HYDRAULICS • Ports ½˝ NPT• Double acting tie rod • Retracted lgth. 26¼˝• Bore x Stroke 4˝ x 16˝ • Clevis ends 2⅝˝ w.• Pressure 2500 PSI • Pin diam. 1˝• Rod dia. 1¼˝ • Shpg. 50 lbs.

4˝ x 30˝ x 2˝

ITEM 9-7873 $149.99SPECIFICATIONS• Model HTR-4030-2 • Pressure 2500 PSI max• Double acting • Ports ½˝ NPT• Bore x Stroke 4˝ x 30˝ • Clevis ends 2.600˝ wide• Rod dia. 2˝ • Pin holes 1˝• Retracted lgth. 40¼˝ • Shpg. 91 lbs.

4˝ x 12˝ x 1½˝Double Rod Steering Cyl.

ITEM 9-7090 $99.95• New, CANADIAN TOOL & DIE Co. dou-ble-rod cylinder.SPECIFICATIONS• Double acting, double rod • Rod clevis 1⅛˝ wide• Bore/stroke 4˝ x 12˝ pin hole 1˝• 2500 PSI max. • Rod end round plate• Rod diam. 1½˝ 4˝ diam., ⅝˝ thick• Ports SAE 8 two holes on 3¼˝ ctrs.• Male trunnions • Rod extends 7/16˝ thru plate1¾˝ OD x 1¼˝ • R. lgth. trunnion tooutside width 8˝ base clevis 715/16˝

• Trunnion/gland face 26½˝ • Shpg. 63 lbs.

4˝ x 10⅛˝ x 2˝

ITEM 9-10225 $199.95• Both ports at base end.SPECIFICATIONS• New, double acting • Retracted lgth. 24˝• Bore x Stroke 4˝ x 10⅛˝ • Tang ends• Pressure 3000 PSI max. rod 21/16˝ w., base 43/16˝ w.• Rod dia. 2˝ • Pin holes 2˝• Ports SAE 12 • Shpg. 81 lbs.

4˝ x 32½˝ x 2½˝

ITEM 9-7515 $449.95SPECIFICATIONS• Double acting • Retracted lgth. 443/16˝• Bore x stroke 4˝ x 32½˝ • Tang ends• Pressure 3000 PSI max. rod 3¼˝ w., base 3½˝ w.• Rod dia. 2½˝ • Pin holes 2˝• Ports SAE 16 • Shpg. 122 lbs.

4˝ x 45˝ x 2˝

ITEM 9-7810 $349.95• Both ports at base end.SPECIFICATIONS • Retracted lgth. 63˝• New, double acting • Rod tang w/ swivel ball• Bore x stroke 4˝ x 45˝ O.D. 49/16˝• Pressure 3000 PSI max. • Base tang 4˝ wide• Rod dia. 2˝ • Pin holes 2˝• Ports SAE 16/12 Ext/Ret • Shpg. 214 lbs.

Truck freight only.

4˝ x 45⅜˝ x 2˝

ITEM 9-7575 $399.95• Nitro-bar rod. Both ports at base end.SPECIFICATIONS• New, double acting • Retracted lgth. 57¼˝• Bore x stroke 4˝ x 45⅜˝ • Rod crosstube 35/16˝ wide• Pressure 3000 PSI max. • Base clevis 215/16˝ wide• Rod dia. 2˝ • Pin holes 1½˝• Ports SAE 12 • Shpg. 135 lbs.

4˝ x 46¾˝ x 2¾˝ Hyd. Cyl.w/ Counterbalance Valve

ITEM 9-9098 $424.95• New, welded hydraulic cylinder withthread-in gland retainer. Superficial rust oncartridge valve and valve cavity from stor-age. Both ports at base end. SUN ModelCBEA-LHN counter-balance valve with 3:1pilot ratio, rated for 30 GPM, set to 3000 PSI.SPECIFICATIONS • Ports SAE 8• Double acting • Retracted lgth. 66½˝• Bore x Stroke 4˝ x 46¾˝ • Clevis ends 4˝ wide• Pressure 3000 PSI max. • Pin holes 2˝• Rod dia. 2¾˝ • Shpg. 246 lbs.

Truck freight only.

4½˝ x 10˝ x 1¾˝

ITEM 9-5613 $99.99SPECIFICATIONS• Double acting • Retracted lgth. 23˝• Bore/stroke 4½˝ x 10˝ • Clevis rod• 2500 PSI • Swivel eye base• Rod diam. 1¾˝ • Pin holes 1¼˝• Ports ½˝ NPT • Shpg. 59 lbs.

4½˝ x 8˝ x 1½˝Rephasing Cylinder

ITEM 9-1675 $72.50SPECIFICATIONS • Ports SAE 8• Double acting rephasing • Retracted lgth. 20¼˝• Bore/stroke 4½˝ x 8˝ • Clevis ends• 2500 PSI max. • Pin holes 1˝• Rod dia. 1½˝ • Shpg. 53 lbs.

4˝ x 16˝ x 1¾˝

ITEM 9-7622-16 $179.95SPECIFICATIONS• Brand new RED LION • Column load• Double acting 31,416 lbs. max.• Bore x stroke 4˝ x 16˝ ASAE• Ports ½˝ NPT• Rod dia. 1¾˝ • Clevis ends 2⅝˝ wide• Retracted lgth. 31½˝ • Pin holes 1¼˝• Pressure 2500 PSI max. • Shpg. 62 lbs.


5½˝ x 62¾˝ x 3˝

ITEM 9-8023 $799.99SPECIFICATIONS• New EAGLE • Retracted lgth. 77˝• Double acting • Crosstube ends• Bore x Stroke 5½˝ x 62¾˝ rod 5˝ w., base 6½˝ w.• Pressure 3000 PSI max. • Pin holes• Rod dia. 3˝ rod 2½˝ , base 3½˝• Ports ¾˝ NPT • Shpg. 435 lbs.

Truck freight only.

6˝ x 24˝ x 3˝

ITEM 9-9361 $649.95SPECIFICATIONS• New, double acting • Retracted lgth. 36˝• Bore x Stroke 6˝ x 24˝ • Crosstube ends• Pressure 3000 PSI max. rod 4¼˝ w., base 7⅞˝ w.• Rod dia. 3˝ • Pin holes 2˝• Ports SAE 12 • Shpg. 270 lbs.

Truck freight only.

5½˝ x 58˝ x 3½˝

ITEM 9-9062 $799.95• New, welded hydraulic cylinder withthread-in gland retainer. Superficial rust oncartridge valve and valve cavity from stor-age. Both ports at base end. SUN ModelCBEA-LHN counter-balance valve with 3:1pilot ratio, rated for 30 GPM, set to 4000 PSI.SPECIFICATIONS • Retracted lgth. 767/8˝• Double acting • Rod tang 5½˝ wide• Bore x Stroke 5½˝ x 58˝ Pin hole 33/16˝• Pressure 3000 PSI max. • Base clevis 4˝ wide• Rod dia. 3½˝ Pin hole 2˝• Ports SAE 12 • Shpg. 445 lbs.

Truck freight only.

4½˝ x 32˝ x 2˝

ITEM 9-7516 $449.95SPECIFICATIONS • Ports SAE 16• Double acting • Retracted lgth. 54½˝• Bore x stroke 4½˝ x 32˝ • Tang ends 2¾˝ wide• Pressure 3000 PSI max. • Pin holes 2˝• Rod dia. 2˝ • Shpg. 145 lbs.

4½˝ x 24˝ x 1¾˝Log Splitter Cylinder

ITEM 9-7849 $236.95• Brand new, FISHER HYDRAULICS trun-nion (gimble) mount cylinder used on manypopular brands of log splitters. Rated 3500PSI to provide up to 27 tons of force. Idealcylinder for replacement use or for buildingheavy duty log splitters.SPECIFICATIONS• Double acting • Rod thru-hole 1½˝ wide• Bore x Stroke 4½˝ x 24˝ Pin hole 9/16˝• Pressure 3500 PSI max. • Base end trunnion• Rod dia. 1¾˝ Trunnion pin width• Push port JIC 8 M outside 8⅞˝, inside 531/32˝• Retract port ½˝ NPT Trunnion pin diam. 1½˝• Retracted lgth. 3⅛˝ Trunnion pin lgth. 17/16˝• Overall retracted lgth. 29⅝˝ • Shpg. 63 lbs.

5˝ x 24˝ x 2˝Log Splitter Cylinder

ITEM 9-7850 $299.95• Brand new, FISHER HYDRAULICS hy-draulic cylinder used on many popularbrands of log splitters. Rated 3500 PSI toprovide up to 34 tons of force. Ideal cylin-der for replacement use or for buildingheavy duty log splitters.SPECIFICATIONS• Double acting • Retracted lgth. 31⅞˝• Bore x Stroke 5˝ x 24˝ • Rod thru-hole 1½˝ w.• Pressure 3500 PSI max. • Pin hole 9/16˝• Rod dia. 2˝ • Base clevis 1⅞˝ wide• Push port JIC 8 M • Pin hole 1¼˝• Retract port ½˝ NPTM • Shpg. 74 lbs.

5˝ x 34½˝ x 3˝

ITEM 9-9990 $519.95• Both ports at base end.SPECIFICATIONS• New, double acting • Retracted lgth. 56⅛˝• Bore x Stroke 5˝ x 34½˝ • Crosstube ends• Pressure 3000 PSI max. rod 5˝ w., base 6⅛˝ w.• Rod dia. 3˝ • Pin hole 2˝• Ports SAE 16 • Shpg. 269 lbs.

Truck freight only.

4½˝ x 119˝ x 3½˝

ITEM 9-7668 $899.95• New. Both ports rod end. Two bolt platebase end. Hollow rod. SUN Model CBGA-CHN counterbalance cartridge valve with3:1 pilot ratio, factory set 3900 PSI. Length133¼˝ from trunnion pin center to end ofbase plate (swing length).SPECIFICATIONS• Double acting • Rod tang 4˝ wide• Bore x stroke 4½˝ x 119˝ pin hole 2˝• Pressure 3000 PSI max. • Trunnion base mount• Rod dia. 3½˝ Width min. 7⅛˝, max. 9¼˝• Ports SAE 12 Pin size 2˝ dia. x 11/16˝• Retracted lgth. 10¾˝ • Shpg. 515 lbs.

Truck freight only.

5˝ x 36¾˝ x 2½˝

ITEM 9-8024 $499.99SPECIFICATIONS • Ports ¾˝ NPT• New EAGLE • Retracted lgth. 48˝• Double acting • Crosstube ends• Bore x Stroke 5˝ x 36˝ rod 4˝ w., base 6¾˝ w.• Pressure 2500 PSI max. • Pin holes 1½˝• Rod dia. 2½˝ • Shpg. 185 lbs.

Truck freight only.

6˝ x 19˝ x 3˝

ITEM 9-9399 $419.95• Both ports at base end.SPECIFICATIONS • Ports SAE 8• New, double acting • Retracted lgth. 30˝• Bore x Stroke 6˝ x 19˝ • Clevis ends 411/16˝ w.• Pressure 2500 PSI max. • Pin holes 2˝• Rod dia. 3˝ • Shpg. 202 lbs.

Truck freight only.

6˝ x 32˝ x 4½˝ Hyd. Cyl.w/ Internal Accumulator

ITEM 9-10011 $599.95• Internal accumulator designed to absorbsudden shocks, cylinder can be used withor without. HYDRO FITTING Model MS 28 -889-2 charging valve installed in rod end.SPECIFICATIONS• New, double acting • Retracted lgth. 56˝• Bore x Stroke 6˝ x 32˝ • Tang ends w/ swivel eye• Pressure 3000 PSI max. 5⅛˝ wide• Rod dia. 4½˝ • Pin holes 2¼˝• Ports SAE 12 • Shpg. 274 lbs.

Truck freight only.

6˝ x 83¾˝ x 3˝

ITEM 9-8022 $999.99SPECIFICATIONS • Ports SAE 12• Nw EAGLE • Retracted lgth. 99⅛˝• Double acting • Rod end pin hole 1½˝ w.• Bore x Stroke 6˝ x 83¾˝ • Base end tang 1½˝ wide• Pressure 3000 PSI max. • Pin holes 1½˝• Rod dia. 3˝ • Shpg. 435 lbs.

Truck freight only.

4½˝ x 14˝ x 1¾˝

ITEM 9-7585 $299.95• Both ports at base end.SPECIFICATIONS• New, double acting • Retracted lgth. 30¼˝• Bore x stroke 4½˝ x 14˝ • Crosstube ends• Pressure 3000 PSI max. rod 2¼˝ w., base 5¼˝ w.• Rod dia. 1¾˝ • Pin holes 1½˝• Ports SAE 8 • Shpg. 69 lbs.

7⅞˝ x 41˝2 Stage

TelescopingCylinder

ITEM 9-9900$695.95

• New, two-stage, double-acting, telescop-ing hydraulic cylinder. Originally built foruse in an out-rigger application. Two STER-LING HYDRAULICS Model E2B040 Z 300Nload control valves rated to 15.9 GPM,5000 PSI, 3:1 pilot ratio. Valves are ad-justable, preset to 300 Bar (4351 PSI). Re-tracted length measured from base end toend of rod.SPECIFICATIONS • Ports ⅜˝ NPT• Double acting • Retracted lgth. 33½˝• Stages 71/16˝, 4⅞˝ • Rod end foot pivot mount• Nominal bores 7⅞˝, 5½˝ O.D. 3½˝• Stroke 20½˝ per stage, • Two pin side mount• Total stroke 41˝ holes 90mm dia. x 3½˝ w.• Rod dia. 4⅞˝ • Pin hole centers 15¾˝• Pressure 3000 PSI max. • Shpg. 690 lbs.

Truck freight only.

800-488-3407 Double Acting & Telescoping Hydraulic Cylinders 65&

7˝ x 69˝ x 5˝

ITEM 9-10193 $1799.99• New, GALBREATH Model D70HB-4-69.SPECIFICATIONS • Rod end crosshole 5˝ w.• Double acting Pin hole 1½˝ and 11/16˝• Bore x Stroke 7˝ x 69˝ • Base end plain• Pressure 3000 PSI max. • Front mount 4 bolt flange• Rod Dia. 5˝ • Flange 12˝ x 12˝ x 1¼˝• Ports SAE 12 • Bolt spacing 7¾˝ c/c• Retracted lgth. 82⅝˝ • Hole size 1˝• Flange to base lgth. 76¾˝ • Shpg. 760 lbs.

Truck freight only.

7˝ x 52˝ x 4˝

ITEM 9-9843 $1359.95• New GALBREATH #D70HB-3-52. Re-tracted length measured from base end tocenter of large pin hole.SPECIFICATIONS • Retracted lgth. 65⅝˝• Double acting • Rod end two thru-holes• Bore x Stroke 7˝ x 52˝ Pin holes 1½˝ & 11/16˝• Pressure 3000 PSI max. • Base mtg. flange• Rod dia. 4˝ four 1˝ holes on 7¾˝ ctrs.• Ports SAE 12 • Shpg. 526 lbs.

Truck freight only.

5¾˝, 4¾˝, 3¾˝ x 62˝3 Stage Telescoping Cyl.

ITEM 9-9108 $599.99• New, PARKER SD63DC-CP157-62 threestage telescoping cylinder. Both ports onend of rod.SPECIFICATIONS • Pressure 2000 PSI max.• Double acting • Ports SAE 12• Nominal bore 1st stage 6˝ • Retracted lgth. 50⅝˝• Stages 5¾˝, 4¾˝, 3¾˝ • Rod end thru-hole 3˝ wide• Total stroke 62˝ • Base crosstube 8¼˝ wide• Tube O.D. 6¾˝ • Pin holes 2˝• Rod dia. 3¾˝ • Shpg. 255 lbs.

Truck freight only.

5˝ x 94½˝ Two-StageTelescoping Hyd. Cyl.

ITEM 9-9517 $589.95• New, CIC P/N SD52CB-9-94.5 two stagetelescoping cylinder. Both ports in rod end.SPECIFICATIONS• Double acting • Retracted lgth. 65½˝• Total stroke 94½˝ • Rod end thru-hole 3⅜˝ w.• Stages 4¾˝ & 3¾˝ • Pin hole 1¾˝• Nominal bores 5˝ & 4˝ • Base end tang w/ swivel• Rod dia. 3¾˝ ball joint 3˝ wide• Pressure 3000 PSI max. • Pin hole 1¼˝• Ports ½˝ NPT • Shpg. 278 lbs.

Truck freight only.

6˝ / 5˝ / 4˝ x 164˝3 Stage Telescoping Cyl.

ITEM 9-7848 $1295.99• New, HYCO three stage telescopingcylinder. Single acting with work port onrod end. Cartridge valve cavity for a pilotoperated relief valve on rod end. Cartridgevalve is not included and requires an Inte-grated Hydraulics cartridge valve #1CE30 -F35S5 to be installed in cavity #AXP6610.Cavity could also be plugged and not usedif pilot valve is not required. Two SAE 6ports for work and pilot connections.SPECIFICATIONS• Single acting • Ports SAE 6• Total stroke 164˝ • Retracted lgth. 68¼˝1st stage 6˝ x 53.81˝ • Rod tang 2˝ wide2nd stage 5˝ x 54.58˝ • Base crosstube 7˝ wide3rd stage 4˝ x 55.62˝ • Pin holes 2˝• Pressure 3000 PSI max. • Shpg. 520 lbs.

Truck freight only.

6˝ x 155½˝ 4 StageTelescoping Hyd. Cyl.

ITEM 9-10202 $1199.99• New, McNEILUS Part #1229470 fourstage telescoping cylinder. Double actingwith work ports on rod end. Trunnion mount.SPECIFICATIONS• Double Acting • Trunnion to rod eye• Stages 4 lgth. 17¾˝• Bores 6˝, 5˝, 4˝, 3˝ • Rod end swivel eye 3˝ w.• Total stroke 155½˝ Pin hole 2˝• Pressure 2500 PSI max. • Trunnion end male pins• Ports SAE 16/SAE 20 Outside pin width 10˝• Base to rod eye Pin dia. 2˝, lgth. 15/16˝lgth. 7415/16˝ • Shpg. 485 lbs.

Truck freight only.

9˝ x 104˝ 4 StageTelescoping Hyd. Cyl.

ITEM 9-9021 $1299.99• New, HYCO Model 20706-914-104 fourstage telescoping cylinder. Double acting.Extend ports on base and rod. Retract porton rod.SPECIFICATIONS• Double Acting • Retract port SAE 8• Stages 4 • Retracted lgth. 49¾˝• Bores 9˝, 8˝, 7˝, 6˝ • Swivel eye ends• Total stroke 104˝ rod 2˝ w., base 2½˝ w.• Pressure 2000 PSI max. • Pin holes 2˝• Extend port SAE 12 • Shpg. 515 lbs.

Truck freight o\nly.

8.12˝ x 108˝ 3 StageTelescoping Hyd. Cyl.

ITEM 9-8076 $999.95• New, HYCO three stage telescoping cylin-der. Single acting with work port on rod end.Cartridge valve cavity for a pilot operated re-lief valve on rod end. Cartridge valve is notincluded and would require an IntegratedHydraulics cartridge valve number 1CE30 -F35 S5 to be installed in the cavity numberAXP6610. Cavity could also be plugged andnot used if pilot valve is not required. TwoSAE 6 ports for work and pilot connections.SPECIFICATIONS• Single acting • Ports SAE 6• Total stroke 108˝ • Retracted lgth. 50.7˝1st stage 8.12˝ x 35.13˝ • Rod end tang 2˝ wide2nd stage 7˝ x 35.86˝ • Base crosstube 10¼˝ wide3rd stage 6˝ x 37.02˝ • Pin holes 2½˝• Pressure 3000 PSI max. • Shpg. 520 lbs.

Truck freight only.

7¼˝ x 80˝ x 4¾˝

ITEM 9-10308 $995.95• New, PARKER/COMMERCIAL # D72LB-9-80. Hollow rod. Three extend ports, onein face of base end. Two retract ports off-set 90° from each other. Retracted lengthmeasured from center of clevis pin to cen-ter of 2½˝ rod pin.SPECIFICATIONS • Retracted lgth. 98¾˝• Double acting • Rod end two thru-holes• Bore x Stroke 7¼˝ x 80˝ Pin holes 15/16˝ & 2½˝• Pressure 2000 PSI max. • Base end clevis 6⅝˝ wide• Rod dia. 4¾˝ hollow Pin hole 2½˝• Ports ¾˝ NPT x four • Shpg. 470 lbs.

Truck freight only.


66 Single Acting Hydraulic Cylinders & Clevis Pins www.surpluscenter.com8

4˝ x 28˝ x 2˝

ITEM 9-7673 $119.99• New, welded thread in gland single act-ing hydraulic cylinder.SPECIFICATIONS • Ports SAE 6• Single acting • Retracted lgth. 35⅞˝• Bore x Stroke 4˝ x 28˝ • Crosstube ends 4¾˝ wide• Pressure 3000 PSI max. • Pin holes 19/16˝• Rod dia. 2˝ • Shpg. 80 lbs.

1⅝˝ x 9˝ x 1⅜˝

ITEM 9-4495 $49.95• New, DUFF NORTON. High pressure sin-gle acting cylinder. Ideal for use with porta-powers and hand pumps. Cross pin forlocking cylinder on full extension.SPECIFICATIONS• Single acting • Retracted lgth. 17˝• Bore x stroke 1⅝˝ x 9˝ • Crosstube ends• Pressure 5800 PSI max. rod 4¾˝ w., base 4˝ w.• Rod dia. 1⅜˝ • Pin holes 1˝• Ports ⅜˝ NPT • Shpg. 22 lbs.

1½˝ x 6˝ x 1½˝

ITEM 9-7214 $49.95• New, Single acting hydraulic displace-ment cylinder. Corrosion resistant Nitrolrod. Non-repairable. Slotted clevis base.SPECIFICATIONS • Retracted lgth. 12⅝˝ min.• Single acting • Retracted lgth. 15⅝˝ max.• Bore/stroke 1½˝ x 6˝ • Rod has thru-hole• 2500 PSI max. outer diam. 1½˝• Rod diam. 1½˝ ⅝˝ distance from rod• Port SAE 4 end to hole center• Slot allows for Pin hole ¾˝3˝ of travel for ¾˝ pin • Base clevis 1½˝ wide

• Shpg. 12 lbs. pin slot ¾˝ x 3¾˝ long

1½˝ x 71˝ x 1½˝

ITEM 9-6107 $119.99• Displacement style cylinder with ports incenter of base end and in rod end. Bothports are for extension.SPECIFICATIONS • Retracted lgth. 73½˝• Single acting • Rod round• Bore/stroke 1½˝ x 71˝ 1½˝ diam. x 1½˝ long• PSI 2500 max. • Port in side of rod• Rod diam. 1½˝ • Base flat, port in end• Ports ¼˝ NPT • Shpg. 40 lbs.

1½˝ x 67˝ x 1½˝Displacement Cylinders

• New, PRINCE MFG. displacement cylin-der with wire-lock gland retainer. Designedto mount vertically with the rod down.These cylinders were originally built for usein car hoists. The steel collar welded to theoutside of the cylinder body was designedto support the lift-arms of the car hoist.SPECIFICATIONS FOR BOTH• Single acting • Port SAE 6• Bore x stroke 1½˝ x 67˝ • Rod end thru-hole• PSI 3000 max. • Pin hole ¼˝• Rod dia. 1½˝ • Hole centered ¼˝• Max load at full from rod endextension 5300 lbs. • Steel body collar

• Retracted lgth. 74⅛˝ • 3˝ O.D.end-to-end • Shpg. 70 lbs.

ITEM 9-7422 $99.95• The port in the base end (the top endwhen mounted vertically) was plumbed tothe base end port of the ITEM 9-7423 cylin-der so that they would extend and retracttogether.

ITEM 9-7423 $99.95• The rod in this cylinder is hollow and con-nects the base port to the port in the sideof the rod. The port in the base end (thetop end when mounted vertically) wasplumbed to the base end port of the ITEM9-7422 cylinder. The port in the side of therod of this cylinder was plumbed to thepump, effectively “teeing” the two cylin-ders together so that they would extendand retract together. This cylinder can beused alone if one of the ports is plugged.

⅞˝ x 1.80˝ x ⅞˝

ITEM 9-6475 $27.50• Single acting displacement cylinder. Re -quires external stop on equipment to preventrod from pushing out of body on extension.SPECIFICATIONS• Single acting • Retracted lgth. 5⅝˝• Bore x stroke ⅞˝ x 1.80˝ • Rod drilled• PSI 2250 max. • Base clevis• Rod diam. ⅞˝ • Pin holes 7/16˝• Port SAE 4 • Shpg. 3½ lbs.

Single Acting Snow Plow Cylinders• New, single acting displacementcylinder. Ideal for replacement onsnow plows and other applications.

SPECIFICATIONS FOR ALL• Single acting • Pressure 2500 PSI max. • Port ¼˝ NPT * ITEM 9-8231 has SAE 6 ports • Thru-hole ends

Outside WidthITEM Bore Stroke Rod Dia. R. Lgth. Rod Base Pin Holes Shpg. Price

9-7878 1½˝ 6˝ 1½˝ 13½˝ 1½˝ 1¾˝ 43/64˝ 13 lbs. $59.999-7880 1¾˝ 77/16˝ 1¾˝ 13⅝˝ 1⅜˝ 2˝ 43/64˝ 15 lbs. $59.999-8231 * 1½˝ 12˝ 1½˝ 211/16˝ 1½˝ 1¾˝ 1˝ 20 lbs. $69.99

1¼˝ to 1˝ CylinderPin HoleBushings

• Brand new PRINCE. Use to reduce cylin-der pin holes from 1¼˝ to 1˝. Made of hard-ened, high carbon, spring steel. Shpg. 1/10 lb.

ITEM 9-6542 ⅞˝ wide $7.40ITEM 9-6543 1˝ wide $6.75

1˝ CylinderClevisITEM 9-7402$16.99• Cast iron cylinder clevis. Use with 1˝ pins(not incl.). 1⅛˝ clearance be tween ears.Tapped for ⅜˝ set screw onto cylinder rod.SPECIFICATIONS • 2⅛˝ throat depth• 1¼˝-12 thread • Shpg. 4 lbs.

Clevis Pins• New, steel clevis pinsfor hydraulic cylinders. In-cludes hair pins. Length isbetween hair pin holes. Shpg. 2 lbs.1˝ Diam.

ITEM Lgth. Price9-7889 25/16˝ $1.499-7440 27/16˝ $1.999-1960 2¾˝ $6.959-1961 3¼˝ $7.95

1¼˝ Diam.ITEM Lgth. Price

9-1962 33/16˝ $9.95

Cylinder Clevis• Brand new. Use asdirect replacement onmany brands of cylin-ders. 1˝ clearance be-tween ears except ITEM9-7616 which has 11/16˝ clearance. Cast iron.

ITEM Pin Thread Shpg. Price9-1902 1˝ 1⅛˝-12 4 lbs. $18.959-1902-A 1˝ 1¼˝-12 4 lbs. $23.959-1903 1˝ 1½˝-12 4 lbs. $40.959-7616 1¼˝ 1½˝-12 4 lbs. $38.95

Clevis Pins

1-1712 9-6745 - 9-6746

• New, steel clevis pins for hydraulic cylin-ders. ITEMS 9-6743 and 1-1712 havespecial cap which eliminates clip at oneend. Pins do not include retaining clips.Shpg. 1½ lbs. Distance Between Overall ITEM Diam. Pinholes Lgth. Price 1-1712 ** 1˝ 2¾˝ * 3⅜˝ $3.49 9-6745 1˝ 2.8125˝ 3.65˝ $1.69 9-6746 1¼˝ 2⅞˝ 3⅝˝ $1.89* Between retaining cap and pin hole ** Stainless Steel

& 800-488-3407 Hydraulic PTO Shaft Motors 67

PTO Drive Motors

• Brand new, hydraulic motor with agricultural standard six tooth splined shaft.Gerolor power element. Tapered roller bearings on output shaft for high axial andradial load capacity. Shaft has retention groove centered 1½˝ from shaft end.• Interchangeable with the following motor lines: Char-Lynn 2000, Danfoss OMS/ -OMSS, White RE/DH, Parker-Ross MB/TF.SPECIFICATIONS FOR ALL• Rotation reversible • Ports SAE 10 • Mount 2 bolt SAE A• Case drain SAE 4 • Shaft 1⅜˝x 4˝ 6T spline • Size 7⅜˝ x 53/16˝ x 41/16˝

Cross Hydraulic Gear Motors• Brand new CROSS hydraulic gear mo-tors. Pressure balanced loading plates forhigh efficiency. Aluminum body for good

heat dissipation. Pressure lubricated Teflonimpregnated sleeve bearings. Internal

check valves eliminate need for case drainat shaft seal pressures under 250 PSI.

40 Series 50 SeriesSPECIFICATIONS SPECIFICATIONS• PSI 3000 max. • Mount SAE A 2 Bolt • PSI 3000 max. • Mount SAE B 2 Bolt• RPM 3000 max. cont. • Ports SAE 12 • RPM 3000 max. cont. • Ports SAE 16• Reversible rotation drain port ¼˝ NPT • Reversible rotation drain port SAE 5• Shaft ⅝˝ x 1¼˝ keyed • Shpg 9 lbs. • Shaft ⅞˝ x 1⅝˝ keyed • Shpg 19 lbs.

40 Series HP and torque specifications listed at 2500 PSI GPM for HP at ITEM Model Displ. 1800 RPM Torque 1800 RPM Price 9-7073-50 40MH05DACSC 0.50 4.4 180 in-lbs. 4.8 $184.95 9-7073-75 40MH75DACSC 0.75 6.5 280 in-lbs. 7.5 $193.95 9-7073-100 40MH10DACSC 1.00 8.8 375 in-lbs. 10 $202.95 9-7073-125 40MH125DACSC 1.25 10.9 475 in-lbs. 13.5 $210.95 9-7073-150 40MH150DACSC 1.50 13 575 in-lbs. 16 $219.95 9-7073-180 40MH180DACSC 1.80 15.5 700 in-lbs. 20 $227.9950 Series HP and torque specifications listed at 2500 PSI GPM for HP at ITEM Model Displ. 1800 RPM Torque 1800 RPM Price 9-7074-195 50MH19DBCSC 1.95 17 775 in-lbs. 18 $321.95 9-7074-232 50MH23DBCSC 2.32 20 900 in-lbs. 23 $332.95 9-7074-274 50MH27DBCSC 2.74 23.75 1050 in-lbs. 28 $340.95 9-7074-330 50MH33DBCSC 3.30 28.5 1275 in-lbs. 33 $371.95 9-7074-380 50MH38DBCSC 3.80 33 1450 in-lbs. 38 $399.99 9-7074-520 50MH52DBCSC 5.20 45 2000 in-lbs. 65 $497.95

Compact, Hi-TorqueHydraulicMotors

• Brand new CHAR-LYNN “J” Series. Useon machine tools, augers, drilling/tappingmachines, conveyors, sweepers, fans, etc.Handles high radial shaft loads. Compactsize fits almost anywhere.SPECIFICATIONS• Rotation reversible • Shaft ⅝˝ diam. x 1⅜˝• Mount 5 bolts on w/ keyway1.775˝ diam. BC • Ports SAE 61.241˝ diam. pilot • Case drain SAE 3

• Size 2⅜˝ x 4⅞˝ • Shpg. 7 lbs.

ITEM 9-1785 $237.95• Displ. 0.5 cu. in./rev.




GPM RPM Torque in. lbs. ITEM Cont. Cont. Peak Cont. Peak 9-1785 4.5 1992 2458 141 164 9-1155 5.5 1575 1859 225 263 9-1156 5.5 1043 1226 333 405 9-1157 5.5 650 767 446 546

Char-Lynn 10,000 Series Hydraulic Motors

• Brand new CHAR-LYNN 10,000 series hydraulic motors. Most pow-erful series of Disc Valve motors made by Eaton.SPECIFICATIONS FOR 10,000 SERIES• Reversible rotation • Mtg. flange SAE C 4 bolt• Ports SAE 16 • SAE 6 case drain

Geroler Seal Kit ITEM 6405 Shpg. ¼ lb. $42.95Shaft End Seal Kit ITEM 6406 Shpg. ¼ lb. $45.95

2¼˝ d. x 4.49˝ Keyed Shaft 2⅛˝ d. 16T Splined Shaft PSI Torque in. lbs. RPM GPM ITEM # Price ITEM # Price Displ. Cont. Int. Cont. Int. Cont. Int. Cont.Int. Size Shpg. 9-7075-1028 $2287.95 9-7075-1032 $2328.95 21.0 3000 4000 9220 12,310 501 784 45 70 15˝ x 6˝ x 6˝ 101 lbs. 9-7075-1029 $2327.95 9-7075-1033 $2368.95 29.3 3000 4000 13,050 17,410 354 552 45 70 15½˝ x 6˝ x 6˝ 105 lbs. 9-7075-1030 $2714.95 9-7075-1034 $2761.95 40.6 3000 3750 18,450 23,080 254 396 45 70 15½˝ x 6˝ x 6˝ 105 lbs. 9-7075-1031 $2805.95 9-7075-1035 $2496.95 57.4 2750 3500 23,910 30,460 179 279 45 70 16¼˝ x 6˝ x 6˝ 110 lbs.

Displ. PSI Torque in. lbs. RPM GPM HP cu. in. Cont. Int. Cont. Int. Cont. Int. Cont. Int. Cont. Int.

9-7368-80 4.95 2576 3091 1682 2124 800 990 17.1 21 21.3 26.9 26 lbs. $274.959-7368-100 6.15 2576 3091 2124 2655 748 900 19.7 23.6 25.2 31.5 27 lbs. $279.959-7368-125 7.63 2576 3091 2744 3275 600 720 19.7 23.6 26.1 31.1 28 lbs. $284.959-7368-160 9.59 2208 3091 2780 3805 470 560 19.7 23.6 20.9 28.4 29 lbs. $289.95

ITEM Shpg. Price

868 Dynamic Hydraulic Motors www.surpluscenter.com

Dynamic Hydraulic Motors

BMPH Series• Brand new DYNAMIC BMPH series hydraulic motors. Gerotorpower element. Interchangeable with the following motor lines:Char-Lynn H, Danfoss DH, White RS, Parker/Ross MG/TB.SPECIFICATIONS FOR BMPH SERIES• Reversible rotation • Shaft 1˝ diam. woodruff keyed• Ports ½˝ NPT • SAE 4 case drain

Seal Kit: ITEM 61193 Shpg. ¼ lb. $42.95 4 Bolt 2 Bolt PSI Torque in. lbs. RPM GPM ITEM ITEM Displ. Cont. Int. Cont. Int. Cont. Int. Cont. Int. Size Shpg. Price 9-7076-50 9-7077-50 3.15 1840 2425 717 956 880 975 11.85 13.15 59/16˝ x 3¼˝ x 3¼˝ 16 lbs. $124.95 9-7076-80 9-7077-80 4.75 1840 2425 1140 1514 740 825 15.8 19.75 5⅝˝ x 3¼˝ x 3¼˝ 17 lbs. $127.95 9-7076-100 9-7077-100 5.90 1840 2425 1425 1885 590 675 15.8 19.75 5¾˝ x 3¼˝ x 3¼˝ 17 lbs. $129.95 9-7076-125 9-7077-125 7.20 1840 2425 1790 2372 475 595 15.8 19.75 515/16˝ x 3¼˝ x 3¼˝ 17 lbs. $134.95 9-7076-160 9-7077-160 9.50 1840 2425 2170 3026 370 465 15.8 19.75 6⅛˝ x 3¼˝ x 3¼˝ 18 lbs. $139.95 9-7076-200 9-7077-200 11.60 1625 2425 2530 3450 295 370 15.8 19.75 65/16˝ x 3¼˝ x 3¼˝ 18 lbs. $144.95 9-7076-250 9-7077-250 14.10 1625 2060 3185 4035 240 295 15.8 19.75 69/16˝ x 3¼˝ x 3¼˝ 19 lbs. $149.95 9-7076-315 9-7077-315 19.00 1625 1840 3575 4470 190 235 15.8 19.75 7¾˝ x 3¼˝ x 3¼˝ 19 lbs. $154.95 9-7076-400 9-7077-400 23.60 1450 1540 3850 4717 150 185 15.8 19.75 7⅜˝ x 3¼˝ x 3¼˝ 20 lbs. $159.95

BMRS Series• Brand new DYNAMIC BMRS series hydraulic motors. Gerolorpower element. Interchangeable with the following motor lines:Char-Lynn S, Danfoss DS, White RS, Parker/Ross MG/TB.SPECIFICATIONS FOR BMRS SERIES• Reversible rotation • Shaft 1˝ diam. woodruff keyed• Ports SAE 10 • SAE 4 case drain

Seal Kit: ITEM 61194 Shpg. ¼ lb. $42.95 4 Bolt 2 Bolt PSI Torque in. lbs. RPM GPM ITEM ITEM Displ. Cont. Int. Cont. Int. Cont. Int. Cont. Int. Size Shpg. Price 9-7078-50 9-7079-50 3.15 2061 2576 885 1115 755 970 10.5 13.1 511/16˝ x 3¼˝ x 3¾˝ 18 lbs. $159.95 9-7078-80 9-7079-80 4.75 2576 2944 1682 1947 750 940 15.8 19.75 515/16˝ x 3¼˝ x 3¾˝ 19 lbs. $164.95 9-7078-100 9-7079-100 5.90 2576 2944 2124 2478 600 750 15.8 19.75 61/16˝ x 3¼˝ x 3¾˝ 19 lbs. $169.95 9-7078-125 9-7079-125 7.20 2576 2944 2584 3010 475 600 15.8 19.75 6¼˝ x 3¼˝ x 3¾˝ 19 lbs. $174.95 9-7078-160 9-7079-160 9.50 2429 2944 3273 3806 375 470 15.8 19.75 6⅝˝ x 3¼˝ x 3¾˝ 20 lbs. $179.95 9-7078-200 9-7079-200 11.60 1914 2576 3168 3965 300 375 15.8 19.75 6⅞˝ x 3¼˝ x 3¾˝ 21 lbs. $184.95 9-7078-250 9-7079-250 14.10 1619 2061 3115 4159 240 300 15.8 19.75 7¼˝ x 3¼˝ x 3¾˝ 22 lbs. $189.95 9-7078-315 9-7079-315 19.00 1251 1693 3186 4159 190 240 15.8 19.75 7¾˝ x 3¼˝ x 3¾˝ 23 lbs. $194.95 9-7078-375 9-7079-375 23.6 1251 1693 3717 4850 160 200 15.8 19.75 83/16˝ x 3¼˝ x 3¾˝ 24 lbs. $199.95

BMSY Series• Brand new DYNAMIC BMSY series hydraulic motors. Gerolor power element. Ta-pered roller bearings on output shaft for high axial and radial load capacity. Inter-changeable with the following motor lines: Char-Lynn 2000, Danfoss OMS/OMSS,White RE/DH, Parker/Ross MB/TF.SPECIFICATIONS FOR BMS SERIES• Reversible rotation • Mount 2 bolt SAE A • Woodruff keyed shafts in sizes shown• Ports SAE 10 • SAE 4 case drain

Seal Kit: ITEM 61226 Shpg. ¼ lb. $42.95 1˝ Shaft 1¼˝ Shaft PSI Torque in. lbs. RPM GPM ITEM ITEM Displ. Cont. Int. Cont. Int. Cont. Int. Cont. Int. Size Shpg. Price 9-7080-80 9-7081-80 4.95 2576 3091 1682 2124 800 990 17.1 21.0 6⅝˝ x 53/16˝ x 41/16˝ 26 lbs. $254.95 9-7080-100 9-7081-100 6.15 2576 3091 2124 2655 748 900 19.7 23.6 6¾˝ x 53/16˝ x 41/16˝ 26 lbs. $259.95 9-7080-125 9-7081-125 7.63 2576 3091 2744 3275 600 720 19.7 23.6 7˝ x 53/16˝ x 41/16˝ 27 lbs. $264.95 9-7080-160 9-7081-160 9.59 2208 3091 2780 3805 470 560 19.7 23.6 7¼˝ x 53/16˝ x 41/16˝ 28 lbs. $269.95 9-7080-200 9-7081-200 12.2 2061 2355 3540 4124 375 450 19.7 23.6 79/16˝ x 53/16˝ x 41/16˝ 29 lbs. $274.95 9-7080-250 9-7081-250 15.4 1840 2355 3983 4779 300 360 19.7 23.6 8˝ x 53/16˝ x 41/16˝ 31 lbs. $279.95 9-7080-315 9-7081-315 19.2 1766 2061 4956 5823 240 280 19.7 23.6 87/16˝ x 53/16˝ x 41/16˝ 31 lbs. $299.95 9-7080-375 9-7081-375 22.6 1472 1766 5098 6195 200 240 19.7 23.6 815/16˝ x 53/16˝ x 41/16˝ 32 lbs. $319.95

800-488-3407 Char-Lynn Hydraulic Motors 69&

Char-Lynn 2000 Series Low Speed Motors

• Brand new CHAR-LYNN 2000 series hydraulic motors. Geroler power element. Tapered rollerbearings on output shaft for high axial and radial load capacity. Interchangeable with the fol-lowing motor lines: Dynamic BMS, Danfoss OMS/OMSS, White RE/DH, Parker/Ross MB/TF.SPECIFICATIONS FOR 2000 SERIES• Reversible rotation • Mount 2 bolt SAE A • 1˝ dia. shafts woodruff keyed• Ports SAE 12 • SAE 4 case drain • 1¼˝ dia. shafts straight keyed

1˝ Shaft 1¼˝ Shaft PSI Torque in. lbs. RPM GPM ITEM # ITEM # Displ. Cont. Int. Cont. Int. Cont. Int. Cont. Int. Size Shpg. Price 9-072-1037 9-072-1061 4.9 3000 4000 2065 3035 908 908 20 20 75/16˝ x 5⅛˝ x 4¼˝ 28 lbs. $513.95 9-072-1038 9-072-1062 6.2 3000 4000 2630 3950 742 924 20 25 7½˝ x 5⅛˝ x 4¼˝ 28 lbs. $518.95 9-072-1039 9-072-1063 8.0 3000 4000 3420 4970 576 720 20 25 7¾˝ x 5⅛˝ x 4¼˝ 28 lbs. $524.95 9-072-1040 9-072-1064 9.6 3000 3750 4040 5040 477 713 20 30 7¾˝ x 5⅛˝ x 4¼˝ 28 lbs. $527.95 9-072-1041 9-072-1065 11.9 3000 3750 4780 5890 385 577 20 30 8˝ x 5⅛˝ x 4¼˝ 28 lbs. $534.95 9-072-1042 9-072-1066 14.9 3000 3750 5850 7250 308 462 20 30 8⅜˝ x 5⅛˝ x 4¼˝ 29 lbs. $546.95 9-072-1043 9-072-1067 18.7 3000 3750 6750 7820 246 365 20 30 8⅞˝ x 5⅛˝ x 4¼˝ 31 lbs. $562.95 9-072-1044 9-072-1068 24.0 2250 2500 6840 8170 191 287 20 30 97/16˝ x 5⅛˝ x 4¼˝ 32 lbs. $581.95

Char-Lynn Hydraulic MotorsS Series

• Brand new CHAR-LYNN S series hydraulic motors. Gerolerpower element. Interchangeable with the following motor lines:Dynamic BMRS, Danfoss DS, White RS, Parker/Ross MG/TB.SPECIFICATIONS FOR S SERIES• Reversible rotation • Shaft 1˝ diam. woodruff keyed• Ports SAE 10 except ½˝ NPT ports on the following (*) 983-1002, 983-1005, 983-1007, 983-1008.

2 Bolt Mount 4 Bolt Mount PSI Torque in. lbs. RPM GPM Item # Price Item # Price Displ. Cont. Int. Cont. Int. Cont. Int. Cont. Int. Size Shpg. 983-1537 $356.95 983-1570 $350.95 3.6 2000 2500 943 1174 962 1155 15 18 57/16˝ x 4¼˝ x 4¼˝ 17 lbs. 983-1034 $358.95 983-1010 $353.95 4.6 2000 2500 1228 1529 762 991 15 20 5½˝ x 4¼˝ x 4¼˝ 17 lbs. 983-1002* $357.95 4.6 2000 2500 1228 1529 762 991 15 20 5½˝ x 4¼˝ x 4¼˝ 17 lbs. 983-1035 $363.95 983-1011 $358.95 5.9 2000 2500 1591 1991 585 811 15 20 5⅝˝ x 4¼˝ x 4¼˝ 18 lbs. 983-1538 $369.95 983-1571 $364.95 7.3 2000 2500 2010 2490 470 631 15 20 5¾˝ x 4¼˝ x 4¼˝ 18 lbs. 983-1539 $378.95 983-1572 $372.95 8.8 1900 2350 2332 2861 385 523 15 20 5⅞˝ x 4¼˝ x 4¼˝ 19 lbs. 983-1036 $382.95 983-1012 $377.95 10.1 1900 2300 2567 3072 353 457 15 20 6˝ x 4¼˝ x 4¼˝ 19 lbs. 983-1037 $394.95 983-1013 $389.95 11.4 1850 2250 2870 3450 303 405 15 20 6⅛˝ x 4¼˝ x 4¼˝ 19 lbs. 983-1005* $393.95 11.4 1850 2250 2870 3450 303 405 15 20 6⅛˝ x 4¼˝ x 4¼˝ 19 lbs. 983-1038 $411.95 983-1014 $406.95 14.1 1700 2050 3265 3877 243 337 15 20 65/16˝ x 4¼˝ x 4¼˝ 20 lbs. 983-1039 $437.95 983-1015 $432.95 18.2 1500 1800 3641 4295 192 254 15 20 6¾˝ x 4¼˝ x 4¼˝ 21 lbs. 983-1007* $436.95 18.2 1500 1800 3641 4295 192 254 15 20 6¾˝ x 4¼˝ x 4¼˝ 21 lbs. 983-1040 $462.95 983-1016 $457.95 22.7 1300 1500 4004 4548 153 204 15 20 7˝ x 4¼˝ x 4¼˝ 22 lbs. 983-1008* $460.95 22.7 1300 1500 4004 4548 153 204 15 20 7˝ x 4¼˝ x 4¼˝ 22 lbs.

Char-Lynn Hydraulic MotorsH Series

• Brand new CHAR-LYNN H series hydraulic motors. Gerotorpower element. Interchangeable with the following motor lines:Dynamic BMPH, Danfoss DH, White RS, Parker/Ross MG/TB.SPECIFICATIONS FOR H SERIES• Reversible rotation • Shaft 1˝ diam. woodruff keyed• Ports 1/2˝ NPT

2 Bolt Mount 4 Bolt Mount PSI Torque in. lbs. RPM GPM Item # Price Item # Price Displ. Cont. Int. Cont. Int. Cont. Int. Cont. Int. Size Shpg. 981-1025 $258.95 981-1001 $253.95 2.8 1800 2400 650 876 969 1127 12 14 5¼˝ x 35/16˝ x 35/16˝ 13 lbs. 981-1026 $265.95 981-1002 $259.95 4.5 1800 2400 1044 1401 760 904 15 18 5⅜˝ x 35/16˝ x 35/16˝ 13 lbs. 981-1027 $272.95 981-1003 $267.95 5.9 1800 2400 1368 1829 585 701 15 18 5½˝ x 35/16˝ x 35/16˝ 14 lbs. 981-1028 $294.95 981-1004 $289.95 9.7 1650 2250 2059 2824 353 471 15 20 513/16˝ x 35/16˝ x 35/16˝ 15 lbs. 981-1029 $306.95 981-1005 $301.95 11.3 1600 2150 2343 3151 304 405 15 20 6˝ x 35/16˝ x 35/16˝ 15 lbs. 981-1030 $324.95 981-1006 $314.95 14.1 1450 2000 2669 3671 243 324 15 20 6¼˝ x 35/16˝ x 35/16˝ 16 lbs. 981-1031 $341.95 981-1007 $336.95 17.9 1350 1800 3110 4121 192 256 15 20 69/16˝ x 35/16˝ x 35/16˝ 16 lbs. 981-1032 $374.95 981-1008 $368.95 22.6 1250 1500 3604 4283 152 202 15 20 7˝ x 35/16˝ x 35/16˝ 16 lbs.

3.36 cu inHydraulicMotorITEM 9-7442$219.99• New, Sundstrand model SNU3/55SSC -07/8G. Aluminum body gear type motor.SPECIFICATIONS • Mount SAE B 2 bolt• Disp. 3.36 cu.-in. / rev. • Shaft ⅞˝ 13 T spline x 1¼˝• Pressure 3045 PSI • In port 1¼˝ 4 bolt flange• Speed 2300 RPM max. • Out port 1½˝ 4 bolt flange• Flow 33 GPM max. • Size 6⅛˝ x 6¾˝ x 6⅛˝• Rotation CW • Shpg. 18 lbs.

1.61 cu. in.Hyd.MotorITEM 9-9352$159.95• New, CASAPPA PLM20.25S0-49U5-LOC/OC-N-EL-V hydraulic motor. Alumi -num motor.SPECIFICATIONS • Rotation CCW• Disp. 1.61 cu. in. / rev. • Mount 2 bolt SAE A• Motor type gear • Shaft ¾˝ x 1⅞˝• PSI 2450 cont. w/ 3/16˝ keyway• Torque: 628 in-lbs. cont. • Ports SAE 10• RPM 2500 cont. • Size 5⅞˝ x 5¼˝ x 4¾˝• GPM 17 cont. • Shpg. 9 lbs.

70 Hydraulic Motors www.surpluscenter.com8

HydraulicMotors

• New, MARZOCCHI uni-directional hy-draulic motors. Side ports.0.25 cu. in.ITEM 9-7870 $49.95SPECIFICATIONS• Model 1AMS6 ST N G P 043• Disp. 0.25 cu. in. / rev. • Torque 5 in-lbs at 1450 PSI• Motor type gear • Rotation CCW• PSI 3000 cont., 3600 peak • Mount 4 bolt USA 4F17• Speed: • Shaft 0.172˝ thick tang1725 RPM at 1.87 GPM • Ports SAE 83450 RPM at 3.74 GPM • Size 4⅜˝ x 3˝ x 3¼˝4000 RPM max. • Shpg. 5 lbs.0.835 cu. in.ITEM 9-7871 $59.95SPECIFICATIONS• Model 1AMS20 STN GP 043• Disp. 0.835 cu. in./rev. • Rotation CCW• Motor type gear • Mount 4 bolt USA 4F17• PSI 2200 cont., 2800 peak • Shaft 0.172˝ thick tang• Speed: • Ports SAE 10 (side)1725 RPM at 6.234 GPM • Size 5½˝ x 215/16˝ x 3½˝2000 RPM max. • Shpg. 6 lbs.

1.89 cu. in.PistonMotor

ITEM 9-1889$249.99• New DYNAPOWER/STRATOPOWER.Bent axis fixed displacement pistonmotor. Ideal for applications requiringhigh operating speeds. Able to withstandhigh operating pressures for increasedtorque output.SPECIFICATIONS • Mount 2 or 4 bolt SAE C• Disp. 1.89 cu. in./rev. • Shaft 1¼˝ 14 T spline• PSI 4650 max. • Rear ports SAE 16• Speed: • Drain port SAE 121400 RPM at 12 GPM • Max. 30 HP3800 RPM max. • Size 10¾˝ x 8⅜˝ x 7˝• Rotation reversible • Shpg. 38 lbs.

0.277 cu. in.Motor

ITEM 9-1365$49.99SPECIFICATIONS • Two bolt mount• 5000 RPM at 6 GPM • Displ. 0.277 cu. in./rev.• Max. 1200 PSI • Reversible• Ports SAE 6 (9/16-18) • Gear width ⅜˝• Shaft ⅜˝ diam. x 1˝ • Size 3˝ x 2½˝ x 2½˝• Needle bearings • Shpg. 2 lbs.

2.75 cu. in. RexrothVariablePistonMotorITEM 9-7938$369.99• New, REXROTH Model A10VM45DG/ -52W1-PUC66N000 variable displacementpiston motor. Cast iron case. Directly oper-ated control, full displacement until pilotport is pressurized. 580 PSI minimum tochange displacement, requirement in-creases as operating pressure rises.SPECIFICATIONS • Flow 47.5 GPM max.• Variable piston motor • Rotation reversible• Displ. 0.73-2.75 cu. in. • Mount 2 bolt SAE B• PSI • Shaft ⅞-13 tooth spline4000 cont., 5100 peak • Rqd. filtration 20/18/15• Torque to ISO 4406146 ft-lbs. at 4000 PSI • Ports SAE 16• Speed: • Case drain SAE 10250 RPM min. • Pilot port SAE 44000 RPM cont. • Size 8˝ x 7˝ x 7¼˝4600 RPM max. • Shpg. 44 lbs.

2.95 cu. in. CommercialGearMotor

ITEM 9-7451$299.95• New, Commercial cast iron gear motor.Model WM330A942OSEB15-25 part 324-9210-056.SPECIFICATIONS• Disp. 2.95 cu. in. / rev. • Rotation reversible• Power 53 HP • Mount 4 Bolt SAE B• Pressure 3500 PSI • Shaft ⅞˝-13 tooth spline• Torque 1400 in-lb. • Ports 1¼˝ 4 bolt flange• Speed 2400 RPM max. • Size 7⅝˝ x 5˝ x 5⅞˝• Flow 33 GPM • Shpg. 42 lbs.

3.83 cu. in.ParkerMotor

ITEM 9-7847$299.99

• New, PARKER Commercial Hyd raulicsModel 323-9219-027 hyd raulic gear motorwith outboard bearing.SPECIFICATIONS• Disp. 3.83 cu. in. / rev. • Rotation reversible• Motor type gear • Mount 4 bolt SAE B• Pressure 3500 PSI • Shaft ⅞-13T spline• Flow 61.7 GPM • Ports SAE 16• Power 99.6 HP • Case drain SAE 4• Torque 2615 in-lbs. • Size 9½˝ x 7⅜˝ x 6¼˝• Speed 2400 RPM • Shpg. 58 lbs.

5.1 cu. in.Motor

ITEM 9-7022$249.95• New, COMMERCIAL SHEARING ModelM51A978BEOL20-7 hydraulic motor.Heavy duty, cast iron construction.SPECIFICATIONS • Power 56 HP max.• Displ. 5.1 cu. in. • Rotation reversible• 2500 PSI max. • Mount 4 bolt SAE C• Torque 1770 in-lb. at • Shaft 1¼˝14T spline (SAE C)49 GPM & 2500 PSI • Ports 1¼˝ flange• RPM 2000 max. • Case drain ¼˝ NPT• 1800 RPM at 45 GPM • Size 8⅛˝ x 5¾˝ x 6⅞˝• 2000 RPM at 50 GPM max. • Shpg. 50 lbs.

5.4 cu. in.HydraulicMotor

ITEM 9-9665$99.95• New NICHOLS 050-4-AM hydraulicmotor. Cast iron housing.SPECIFICATIONS• Disp. 5.4 cu. in. / rev. • GPM 16 cont., 22 int.• Motor Type Gerotor • Rotation reversible• PSI 3000 cont., 3500 int. • Mount 2 bolt SAE A• Torque: • Shaft 1˝ dia. x 1¾˝ keyed2129 in-lbs. cont. • Ports manifold2543 in-lbs. int. • Size 4˝ x 5¼˝ x 4˝



on pages 146 - 147

4.5 cu. in.Char-LynnMotor

ITEM 9-8268 $119.99• New CHAR-LYNN A Series 101-1002 hy-draulic motor.SPECIFICATIONS• Disp. 4.5 cu. in. / rev. • GPM 12 cont., 15 int.• Motor Type Gerotor • Rotation reversible• PSI 1100 cont., 1600 int. • Mount 4 bolt 3.25˝ B.C.• Torque: • Shaft 1˝ dia. x 1¾˝ keyed582 in-lbs. cont. • Ports SAE 10855 in-lbs. int. • Size 5¼˝ x 35/16˝ x 35/16˝



MotorITEM 9-9132$199.95

• New VON RUDEN Model MLHS200C4Ahydraulic motor. Cast iron housing.SPECIFICATIONS• Disp. 12.2 cu. in. / rev. • GPM 20 cont., 24 int.• Motor Type Geroler • Rotation reversible• PSI 3050 cont., 3625 int. • Mount 4 bolt SAE A• Torque: • Shaft 1¼˝ dia. x 2¼˝ keyed3540 in-lbs. cont. • Ports SAE 104425 in-lbs. int. • Size 7½˝ x 5⅝˝ x 5⅝˝


12.2 cu. in.Hyd.MotorITEM 9-9417$169.95• New ZHENJIANG HYDRAULICS BMS se-ries hydraulic motor. Gerolor power element.Tapered roller bearings on output shaft forhigh axial and radial load capacity.SPECIFICATIONS • GPM 19.7 cont., 23.6 int.• Disp. 12.2 cu. in. / rev. • Rotation reversible• Motor Type Geroler • Mount 2 bolt SAE A• PSI 2061 cont., 2355 int. • Shaft 1¼˝ x 113/16˝• Torque: w/5/16˝ key3540 in-lbs. cont., • Ports SAE 124124 in-lbs. int. • Size 8⅛˝ x 5¼˝ x 4½˝



Motor

ITEM 9-9347 $149.95• New WHITE Model GMVD125630-H206gerotor hydraulic motor. Cast iron housing.SPECIFICATIONS • Rotation reversible• Disp. 7.68 cu. in. / rev. • Mount 4 bolt SAE A• Motor Type Gerotor • Shaft 32mm dia.• PSI 2538 cont. x 2⅜˝ keyed• Torque 2212 in-lbs. cont. • Ports ½˝ BSPP• RPM 520 cont. • Size 7¾˝ x 4½˝ x 4¼˝• GPM 17 cont. • Shpg. 24 lbs.


ITEM 9-9420 $219.95• New ZHENJIANG HYDRAULICS BMSSeries hydraulic motor. Gerolor power ele-ment. Tapered roller bearings on outputshaft for high axial and radial load capacity.Cast iron housing. Peeling paint.SPECIFICATIONS • GPM 19 cont., 23 int.• Disp. 9.76 cu. in. / rev. • Rotation reversible• Motor Type Geroler • Shaft 1¼˝ x 115/16˝• PSI 3625 cont., 4351 int. keyed• Torque: • Ports SAE 122796 in-lbs. cont., • Case drain SAE 43805 in-lbs. int. • Size 7½˝ x 5¼˝ x 4½˝


12.2 cu. in. BucherHyd.

Motor

ITEM 9-7567 $148.95• New, Bucher Hydraulics Model BRGL -200A18. Compare to White RG motors.SPECIFICATIONS• Displ. 12.2 cu. in. / rev. • GPM 12 cont., 15 int.• Motor type geroler • Rotation reversible• PSI 2000 cont., 2750 int. • Mount 2 bolt SAE A• Torque • Shaft 25 mm dia. x 1⅝ ̋keyed3350 in-lbs. cont., • Ports ½˝ BSPP4650 in-lbs. int. • Size 7⅜˝ x 5¼˝ x 4˝


9.74 cu. in.Hyd.

Motor

ITEM 9-7491 $202.50• New, M+S Model MLHSFD4U discvalve, roll geroter hydraulic motor. Com-parable to Char-Lynn 2000 series. Casedrain port for use when return line pres-sure exceeds 290 PSI.SPECIFICATIONS • Rotation reversible• Disp. 9.74 cu. in. / rev. • Mount 4 bolt magneto• Motor type Geroler • Shaft 1˝ dia. keyed x 1.93˝• PSI 2970 cont., 3260 int. • Rqd. filtration 25 micron• Torque in-lbs. • Ports SAE 104070 cont.. 4560 int. • Case drain SAE 4

• RPM 470 cont., 560 int. • Size 73/16˝ x 5⅛˝ x 45/16˝• GPM 20 cont., 24 int. • Shpg. 22 lbs.


Motor

ITEM 9-7646 $169.95• New, Danfoss DS160 hydraulic motor(151-2305).SPECIFICATIONS• Disp. 9.51 cu. in. / rev. • Rotation reversible• Motor Type Geroler • Mount 2 bolt SAE A• PSI 2000 cont., 2500 int. • Shaft 1˝ dia x 1½˝• Torque w/keyway2780 in-lbs. cont., • Ports SAE 103350 in-lbs. int. • Case drain SAE 5

• RPM 380 cont., 475 int. • Size 5⅝˝ x 5⅛˝ x 3¾˝• GPM 15.9 cont., 19.8 int. • Shpg. 18 lbs.

800-488-3407 Hydraulic Motors 71&

11.9 cu. in.Ross TorqMotorITEM 9-5623$119.99• New, ROSS Model MF120928. Hyd. motorfor low speed, high torque applications.SPECIFICATIONS • HP 10.9 max.• Displ. 11.9 cu. in. • Rotation reversible• PSI 2000 cont. • Mount 4 bolt on 3¼˝ B.C.• PSI 2500 int. • Shaft ⅞˝ diam. x 1¾˝ 13T• Torque 3197 in. lbs. cont. • Ports SAE 10• RPM 288 max. A/O load • Size 6¾˝ x 3⅞˝ x 3⅜˝• 215 RPM at 12 GPM • Shpg. 20 lbs.


ITEM 9-9788 $189.95• New CHAR-LYNN Model 130-1016-003hydraulic motor. Cast iron housing.SPECIFICATIONS • GPM 12 cont., 15 int.• Disp. 9.7 cu. in. / rev. • Rotation reversible• Motor Type Gerotor • Mount 2 bolt SAE A• PSI 1000 cont., 1500 int. • Shaft 1˝ diam. x 1⅝˝• Torque: woodruff key1100 in-lbs. cont. • Ports SAE 101670 in-lbs. int. • Size 6˝ x 53/16˝ x 311/16˝


11.3 cu. in.HydraulicMotorITEM 9-9781$209.95• New CHAR-LYNN Model 103-1037-010hydraulic motor. Cast iron housing.SPECIFICATIONS• Disp. 11.3 cu. in. / rev. • GPM 15 cont., 20 int.• Motor type geroler • Rotation reversible• PSI 1850 cont., 2250 int. • Mount 2 bolt SAE A• Torque: • Shaft 1˝ dia. x 1⅞˝ keyed2330 in-lbs. cont., • Ports SAE 102910 in-lbs. int. • Size 6⅛˝ x 53/16˝ x 4⅛˝


11.9 cu. in.Hydraulic MotorITEM 9-7845$179.99• New PARKER TB series hydraulic motor.Roller vane motor with zero leak commu-tation valve provides greater, more consis-tent power over its operating range. Fullflow lubrication maximizes cooling and ex-tends operating life. Higher pressure rat-ings for greater operating torque.SPECIFICATIONS• Disp. 11.9 cu. in. / rev. • GPM 12 cont., 15 int.• Motor type vane • Rotation reversible• PSI 1800 cont., 2100 int. • Mount 4 bolt magneto• Torque: • Shaft 1˝ dia. 6 tooth spline2821 in-lbs. cont., • Ports SAE 103360 in-lbs. int. • Size 6¾˝ x 5⅜˝ x 3¾˝


5.4 cu. in. BucherHydraulicMotor

ITEM 9-7569 $199.95• New, Bucher Hydraulics Model BHB090-A9312. 6 bolt mount for either SAE A ormagneto mounting. Compare to Char-Lynn 2000 or White RE series motors.SPECIFICATIONS • GPM 16 cont., 20 int.• Displ. 5.4 cu. in. / rev. • Rotation reversible• Motor type geroler • Mount 6 bolt SAE A• PSI 3000 cont., 3500 int. • Shaft 25 mm dia. x 1¾ ̋keyed• Torque • Ports ½˝ BSPP2000 in-lbs. cont., • Case drain ¼˝ BSPP2400 in-lbs. int. • Size 7⅞˝ x 5¼˝ x 4˝


19.2 cu. in.HydraulicMotorITEM 9-9410$179.99• New ZHENJIANG HYDRAULICS BMSSeries hydraulic motor. Gerolor power el-ement. Tapered roller bearings on outputshaft for high axial and radial load capac-ity. Interchangeable with the followingmotor lines: Char-Lynn 2000, DanfossOMS / OMSS, White RE / DH, Parker -Ross MB /TF.SPECIFICATIONS • GPM 19.7 cont., 23.6 int.• Disp. 19.2 cu. in. / rev. • Rotation reversible• Motor Type Geroler • Mount 2 bolt SAE A• PSI 1766 cont., 2061 int. • Shaft 1¼˝ dia.• Torque: • Ports SAE 124956 in-lbs. cont., • Case drain SAE 45823 in-lbs. int. • Size 87/16˝ x 53/16˝ x 41/16˝


16.4 cu. in.NicholsMotor

ITEM 9-9499 $269.99• New, Nichols Model 106-7-AS-0 hy-draulic motor. Compact design.SPECIFICATIONS• Disp. 16.4 cu. in. / rev. • GPM 20 cont., 30 int.• Motor Type Disc Valve • Rotation reversible• PSI 2500 cont., 2750 int. • Mount 2 bolt SAE A• Torque: • Shaft ⅞-13 T spline x 1.79˝5475 in-lbs. cont. • Ports SAE 106072 in-lbs. int. • Size 5˝ x 6˝ x 4¾˝



ITEM 9-9338 $299.99• New BUCHER HYDRAULICS ModelBREL750-A31 20 000 hydraulic motor.Cast iron housing.SPECIFICATIONS • GPM 20 cont., 24 int.• Disp. 45.6 cu. in. / rev. • Rotation reversible• Motor type gerotor • Mount 4 bolt Magneto• PSI 1493 cont., 1754 int. • Shaft 1¼˝ x 2⅛˝• Torque: keyed and tapped ⅝-189399 in-lbs. cont. • Ports SAE 1010948 in-lbs. int. • Size 8½˝ x 6˝ x 5⅞˝


31.88 cu. in.Hyd.

Motor

ITEM 9-7469 $249.99• New, M+S HYDRAULIC ModelMLHSF525C4B. Comparable to Char-Lynn 2000 series motor.SPECIFICATIONS • Rotation reversible• Displ. 31.88 cu. in. / rev. • Mount 4 bolt Magneto• Motor Type Disc Valve Geroler • Shaft 1¼˝ dia x 1.9˝ keyed• PSI 1160 cont., 1310 int. • Rqd. Filtration 25 Micron• Torque 5130 in-lbs. cont. • Ports SAE 10

6105 in-lbs. int. • Case drain SAE 4• RPM 145 cont., 175 int. • Size 8¾˝ x 5¼˝ x 4˝• GPM 20 cont., 24 int. • Shpg. 34 lbs.

24.8 cu. in.Hyd.MotorITEM 9-8030$219.99• New, DYNAMIC Model BMH-400-4-G-Shydraulic motor. ROLORTORC power ele-ment provides high efficiency and torque, lownoise and smooth start up at low pressure.SPECIFICATIONS • Rotation reversible• Disp. 24.8 cu. in. / rev. • Mount 4 bolt magneto• Motor Type Rolortorc • Shaft 1¼˝ dia. x 211/16˝• PSI 2285 cont., 2805 int. keyed• Torque • Shaft tapped ⅜-16 UNC7646 in-lbs. cont., • Ports SAE 108744 in-lbs. int. • Case drain SAE 4

• RPM 183 cont., 220 int. • Size 711/16˝ x 53/16˝ x 513/16˝• GPM 19.75 cont., 23.70 int. • Shpg. 31 lbs.


Motor

ITEM 9-7753 $129.99• New, WHITE DRIVE PRODUCTS motors.SPECIFICATIONS• Disp. 12.5 cu. in. / rev. • Model 200200A1110CAAAA• Motor Type Roller stator • Rotation reversible• PSI 1500 cont., 1750 int. • Mount 2 bolt SAE A• Torque: 2640 in-lbs. cont.,• Shaft 1˝ dia. x 115/32˝, keyed3050 in-lbs. int. • Ports SAE 10

• RPM 300 cont., 370 int. • Size 6⅜˝ x 5¼˝ x 3¾˝• GPM 16 cont., 20 int. • Shpg. 22 lbs.

72 Hydraulic Motors www.surpluscenter.com8

22.6 cu. in.HydraulicMotorITEM 9-9787$309.95• New CHAR-LYNN Model 130-1365-003hydraulic motor. Cast iron housing.SPECIFICATIONS • GPM 15 cont., 20 int.• Disp. 22.6 cu. in. / rev. • Rotation reversible• Motor Type Geroler • Mount 2 bolt SAE A• PSI 1250 cont. 1500 int. • Shaft 1˝ diam. x 1¾˝• Torque: woodruff key3604 in-lbs. cont. • Ports SAE 104283 in-lbs. int. • Size 7˝ x 5˝ x 311/16˝


White Hyd.Motors

• New, White Hydraulics roller statormotor. Compare to Char-Lynn S series.

ITEM 9-7564 $139.95SPECIFICATIONS• Model RS200200A1102 • GPM 16 cont., 20 int.• Displ. 12.5 cu. in. / rev. • Rotation reversible• Motor type geroler • Mount 2 bolt SAE A• PSI 1500 cont., 1750 int. • Shaft 1˝ dia. 6 T spline• Torque tapped 5/16-18 UNC2640 in-lbs. cont., • Ports SAE 83050 in-lbs. int. • Size 6⅛˝ x 5⅛˝ x 4¼˝


ITEM 9-7565 $149.95SPECIFICATIONS• Model RS200250A1802 • GPM 20 cont., 24 int.• Displ. 15.5 cu. in. / rev. • Rotation reversible• Motor type geroler • Mount 2 bolt SAE A• PSI 1250 cont., 1500 int. • Shaft 1˝ dia. 6 T spline• Torque tapped 5/16-18 UNC2540 in-lbs. cont., • Ports ½˝ BSPP3040 in-lbs. int. • Size 6¼˝ x 5⅛˝ x 4¼˝



ITEM 9-8174-B $149.95• New, Char-Lynn T Series Model 158-1038 hydraulic motor. Nickel plated bodyfor corrosion resistance.SPECIFICATIONS • GPM 15 cont., 20 int.• Disp. 14.9 cu. in. / rev. • Rotation reversible• Motor Type Geroler • Mount 2 bolt SAE A• PSI 1850 cont., 2250 int. • Shaft 1˝ dia. x 1¾˝• Torque: w/woodruff key3633 in-lbs. cont. • Ports SAE 104290 in-lbs. int. • Size 6.71˝ x 5.27˝ x 3.87˝


When you are in the areavisit our showroom at

1015 West “O” Street, Lincoln, NE


ITEM 9-074-1014 $119.99• New CHAR-LYNN 2000 Series 104-1043hydraulic motor. Bearingless design espe-cially designed for powering gear boxes,winches, auger drives and other directmount applications. Bearingless motordrives must utilize a bearing supported in-ternal spline to mate to motor drive shaft.SPECIFICATIONS • GPM 20 cont., 30 int.• Disp. 18.7 cu. in. / rev. • Rotation reversible• Motor Type Geroler • Mnt. 4 bolt 5˝ bolt circle• PSI 3000 cont., 3750 int. • Shaft 1˝ 12 tooth spline• Torque: • Ports SAE 106750 in-lbs. cont. • Case drain SAE 47820 in-lbs. int. • Size 6½˝ x 4¾˝ x 4¾˝


11.9 cu. in.HydraulicWheelMotorITEM 9-9415$299.95• New PARKER TG0195SJ08AGAW hy-draulic wheel motor with integrated wetdisc brake. Brake holding capacity 9000in. lbs. Maximum release pressure 300 psi,brake release port capable of withstanding3000 psi. Cast iron housing.SPECIFICATIONS • Rotation reversible• Disp. 11.0 cu. in. / rev. • Mount 4 bolt wheel 7˝ B.C.• Motor Type Geroler • Shaft 1¼˝ tapered• PSI 3000 cont., 4000 int. x 2⅜˝ keyed• Torque: • Ports SAE 65098 in-lbs. cont., • Brake port SAE 46776 in-lbs. int. • Case drain N/A

• RPM 381 cont., 477 int. • Size 9½˝ x 7⅜˝ x 7⅜˝• GPM 20 cont., 25 int. • Shpg. 66 lbs.

Wheel Motor withIntegralParkingBrake

ITEM 9-6770 $299.95• New, EATON CHAR-LYNN W Series. Lowspeed, high torque wheel motor with park-ing brake. Fully integrated friction discbrake, spring applied and hydraulic re-leased. Internal brake rated 7000 in-lbs oftorque. Full brake release at 250 PSI pilotpressure. Pilot port can withstand full op-erating pressure. Low flow option forhigher operating efficiency at low speeds.SPECIFICATIONS• Model 162-1146 • Torque• Displ. 11.9 cu. in. cont. 2816 in. lbs./1800 PSI• 151 RPM at 8 GPM max. int. 3882 in. lbs./2600 PSI• Mount 4 bolt wheel mount on 5.812˝ bolt circle• Shaft 1¼˝ tapered with 1-20 UNEF threaded end• Ports SAE 10 • Pilot port SAE 4• Size 83/16˝ x 5¼˝ x 5¼˝ • Shpg. 42 lbs.

ZTR Mower Drive Kit

• New, zero turn mowerdrive kit directly from factoryproduction line. Consists oftwo hydraulic piston pumps,two hydraulic motors alongwith hose and fitting kit forconnecting them together.All components made byParker. Trunnion shafts onpumps to vary displace-ment.

24.7 cu. in. HydraulicMotors With Brake

• New ROSS hydraulic wheel motor withbrake. Roller vane power element. Heavyduty roller bearings. Brake holding capacity9000 in. lbs. Full release at 460 PSI. SAE 4brake release port. Cast iron housing.SPECIFICATIONS FOR BOTH• Disp. 24.7 cu. in. / rev. • GPM 20 cont., 25 int.• Motor Type Vane • Rotation reversible• PSI 2500 cont., 3500 int. • Mount 4 bolt on 6¾˝ B.C.• Torque: • Shaft 1½˝ diam. x 2⅞˝8336 in-lbs. cont., tapered w/castle nut11877 in-lbs. int. • Ports SAE 10

• RPM 162 cont., 232 int. • Case drain N/A

ITEM 9-10068$649.95

• Model ME246731JCAC. Side ports 180°apart. Size 13⅛˝ x 6¾˝ x 6¾˝. Shpg. 77 lbs.

ITEM 9-9142$649.95

• Model ME246731JCAB. Side ports side-by-side. Size 14˝ x 6¾˝ x 6¾˝. Shpg. 83 lbs.

18.3 cu. in.Hyd. WheelMotorITEM 9-9131$169.99• New, WHITE RE Series 500300 W3122 -AACAA hydraulic wheel motor. 3¼˝ diam-eter nose. 513/16˝ bolt circle.SPECIFICATIONS • GPM 22 cont., 25 int.• Disp. 18.3 cu. in. / rev. • Rotation reversible• Motor type gear • Wheel mount• PSI 3000 cont., 3500 int. • Shaft 1¼˝ tapered x• Torque 2½˝ threaded end7300 in-lbs. cont., • Ports SAE 109300 in-lbs. int. • Size 7¼˝ x 5½˝ x 5½˝


800-488-3407 Hydraulic Wheel Motors 73&

18.3 cu. in.Hyd. Wheel

MotorITEM 9-7741$169.99

• New, WHITE HYDRAULICS CE Seriescompact wheel motor. Model 430300W -3131AAAA. Special valve-in-rotor designkeeps body short for tight clearance applica-tions. 3¼˝ dia. nose, 513/16˝ bolt circle mount.SPECIFICATIONS• Disp. 18.3 cu. in. / rev. • Rotation reversible• Motor Type Geroler • Mount wheel mount• PSI 3000 cont., 3250 int. • Shaft 1½˝ tapered• Torque with threaded end7100 in-lbs. cont., • Rqd. filtration7630 in-lbs. int. • Ports SAE 10

• RPM 250 cont., 320 int. • Size 5⅛˝ x 5⅛˝ x 4⅜˝• GPM 20 cont., 25 int. • Shpg. 29 lbs.

13.9 cu. in. Motors

ITEM 9-8050 $649.99SPECIFICATIONSPUMPS MOTORS• Model H110A2013DDAAX • Model TE0230US250AAFB• Disp. 0.622 cu. in. / rev. • Disp. 13.9 cu. in. / rev.• Pump type variable piston • Motor type gerotor• Rotation reversible • PSI 1740 cont., 2700 int.• PSI 1000 cont., 2100 int. • Torque:• RPM 1800 cont., 3600 int. 3363 in-lbs. cont.,• 9.7 GPM at 3600 RPM 4554 in-lbs. int.• Mount 2 bolt SAE A • RPM 150 RPM at 9.7 GPM• Shaft 15mm x 2˝ w/key • RPM 328 RPM at 15 GPM• Rqd. filtration 25 micron • GPM 12 cont., 15 int.• Charge pump inlet SAE 6 • Rotation reversible• Work ports SAE 8 • 4 bolt wheel mount• Case drain SAE 6 • 5⅛˝ B.C., 2⅜˝ pilot• Size 4¼˝ x 6˝ x 6˝ • Shaft 1˝ tapered with threaded end & keyway 2.59˝ overall lgth. • Ports SAE 10• Kit shpg. 78 lbs. • Size 4¾˝ x 5¾˝ x 4¾˝

14.5 cu. in. Motors

ITEM 9-8051 $679.95SPECIFICATIONSPUMPS MOTORS• Model H110A2013DDAAX • Model TL0240US080AAWM• Disp. 0.622 cu. in. / rev. • Disp. 14.5 cu. in. / rev.• Pump type variable piston • Motor type gerotor• Rotation reversible • PSI 2750 cont., 3500 int.• PSI 1000 cont., 2100 int. • Torque:• RPM 1800 cont., 3600 int. 5485 in-lbs. cont.,• 9.7 GPM at 3600 RPM 6990 in-lbs. int.• Mount 2 bolt SAE A • RPM 150 RPM at 9.7 GPM• Shaft 15mm x 2˝ w/key • RPM 399 RPM at 25 GPM• Rqd. filtration 25 micron • GPM 18 cont., 25 int.• Charge pump inlet SAE 6 • Rotation reversible• Work ports SAE 8 • 4 bolt wheel mount• Case drain SAE 6 • 53/16˝ B.C., 3¼˝ pilot• Size 4¼˝ x 6˝ x 6˝ • Shaft 1¼˝ tapered with threaded end & keyway 2.59˝ overall lgth. • Ports SAE 10• Kit shpg. 92 lbs. • Size 5¼˝ x 5˝ x 5¼˝

7.4 cu. in.HydraulicWheelMotorITEM 9-9340$249.95• New, WHITE DRIVE PRODUCTS Model2431202110 CE series hydraulic wheelmotor. Extremely compact, light-weightwheel motor. Ships with castle nut.SPECIFICATIONS • Wheel mount• Disp. 7.4 cu. in. / rev. 4 bolts on 513/16˝ B.C.• Motor Type Roller Stator ½˝ bolt holes• PSI 3000 cont., 3250 int. Pilot O.D. 3¼˝• Torque: • Shaft 1¼˝ tapered & keyed2850 in-lbs. cont., End threaded 1-20 x ¾ ̋long3150 in-lbs. int. 2½˝ overall length

• RPM 360 cont., 490 int. • Ports ½˝ BSPP• GPM 12 cont., 16 int. • Size 5⅝˝ x 5¼˝ x 5½˝• Rotation reversible • Shpg. 27 lbs.

You can find hubson page 74

FairfieldTorqueHub

ITEM 9-7656$499.95• New, Fairfield HW4C21 Series Model91413001 planetary final drive. Built to de-liver high torque for industrial machineryand off-road mobile equipment. Wheel hubdrive mounts directly to drive wheel.SPECIFICATIONS • Radial load 5500 lbs.• Reduction ratio 34.6:1 • Spindle mount dia. 11˝• Torque • Spindle mnt. bolt circle 9½˝46650 in.-lbs. cont. • Spindle mnt. 8 holes ¾-1093300 in.-lbs. max. • Output hub dia. 17˝• Input 4500 RPM max. • Wheel pilot dia. 10½˝• Output 150 RPM max. • Wheel hub bolt circle 15˝• Motor mount SAE C 4 bolt • Wheel studs twelve ¾-16• Motor input • Overall length 11½˝1¼-14 T spline (female) • Shpg. 265 lbs.

Truck freight only.

45.6 cu in HydWheelMotorw/Brake

ITEM 9-7703 $279.95• New, WHITE HYDRAULICS DT Serieswheel motor Model 712750W8A 31 AAAAA.Provides extremely high torque output froma compact frame. Internal brake rated tohold 18,000 lb. in. Requires 275 PSI oil tobegin release, full release at 475 PSI. Brakeport max pressure 3000 PSI.SPECIFICATIONS • Rotation reversible• Displ. 45.6 cu. in. / rev. • Mount 4 bolt wheel mount• Motor type Geroler 8¼˝ BC, 7.11˝ pilot dia.• PSI 2500 cont., 3000 int. • Shaft 1½˝ tapered shaft• Torque • Ports ½˝ BSPP15750 in-lbs. cont. • Brake port SAE 418500 in-lbs. int. • Case drain ¼˝ BSPP• RPM 130 cont., 150 int. • Size 7¾˝ x 7¾˝ x 11˝• GPM 25 cont., 30 int. • Shpg. 75 lbs.

45.6 cu. in.Hyd. Wheel

Motor

ITEM 9-7272 $399.95• New, WHITE Model 500750W 3120 -ZAAAA hydraulic wheel motor. 3¼˝ diame-ter pilot nose. Shaft end tapped ⅝˝-18,snap ring groove close to bearing.SPECIFICATIONS• Displ. 45.6 cu. in. • Rotation reversible• PSI 1500 cont., • Four bolt mount1750 int., 2000 peak on 513/16˝ B.C.

• Torque 9400 in-lbs. cont. • Shaft 1¼˝ d. x 1⅞˝ keyed• Torque 10,950 in-lbs. int. • Ports SAE 10• RPM 100 cont. at 20 GPM • Size 8½˝ x 5⅛˝ x 5⅛˝• RPM 130 int. at 24 GPM • Shpg. 39 lbs.

874 Hydraulic Wheel Motors & Hubs www.surpluscenter.com

22.8 cu. in.DanfossMotor

ITEM 9-7688 $329.99• New, DANFOSS Model OMRW 375 NFV151-64495 hydraulic motor. Spring-ap-plied, pressure released parking brake re-leases at 305 PSI, rated to 2900 PSI maxand 3540 in-lbs. max holding torque. Shaftis 1¼˝ diam. x 213/32˝ 19T spine, then 1˝diam. x 111/32˝ smooth for a total lgth. of3¾˝. Shaft seal case drain port, brake drainport and brake release port are all SAE 4.Needle bearings.SPECIFICATIONS• Disp. 22.8 cu. in./rev. • GPM 15.9 cont., 19.8 int.• Motor Type Orbital • Rotation reversiblew/ spool valve • Mount 4 bolt wheel• PSI 1670 cont., 2180 int. • Shaft 1¼˝ 19T splined• Torque: • Ports SAE 105130 in-lbs. cont., • Case drain SAE 46110 in-lbs. int. • Size 5¼˝ x 5¼˝ x 12⅛˝• RPM 160 cont., 200 int. • Shpg. 42 lbs.

4 Bolt WheelHubITEM 1-3161$14.95• New, machined casting wheel hubs withbrake drum. Ideal for mounting wheels ontohydraulic motors with 1¼˝ tapered shaft.SPECIFICATIONS• Wheel studs 4 ½-20 thread• Brake drum dia. 6˝• Bolt circle 4˝ • Size 6½˝ dia. x 1¾˝• Hub 1¼˝ tapered w/keyway • Shpg. 6 lbs.

5 Bolt WheelHubITEM 1-1726$40.95• Brand new. 1¼˝ ID tapered cast iron hubfor use with drive wheel applications.Drilled/ tapped ½-20 flange for wheel studs.SPECIFICATIONS• 5 bolt on 4½˝ bolt circle • 2½˝ diam. wheel pilot• 1¼˝ ID hub tapered 1½˝/ft. • Size 5⅜˝ dia. x 1½˝ thick• ½˝-20 drilled/tapped flange • Shpg. 6 lbs.

5 Bolt Wheel Hubs• New, machined steelcasting five bolt wheel hubwith brake drum. Ideal formounting wheels onto hy-draulic motors.

1½˝ HubITEM 9-9003 $14.95SPECIFICATIONS• Wheel studs 5 • Bore taper 1½˝ per foot• Wheel stud ½˝-20 thread • Thru-hub lgth. 1.838˝• Bolt circle 4½˝ • Brake drum I.D. 6.299˝• Hub 1½˝ tapered w/keyway • Size 7⅜˝ dia. x 29/32˝• Keyway size 5/16˝ • Shpg. 10 lbs.1¼˝ HubITEM 1-3364 $14.95SPECIFICATIONS• Wheel studs 5 • Bore taper 1½˝ per foot• Wheel stud ½-20 thread • Thru-hub lgth. 129/64˝• Bolt circle 4½˝ • Brake drum dia. 6.299˝• Hub 1¼˝ tapered w/keyway• Size 7⅜˝ dia. x 27/16˝• Keyway size 5/16˝ • Shpg. 10 lbs.

28.3 cu. in.Hyd.WheelMotor

ITEM 9-7735 $169.99• New, WHITE HYDRAULICS RE SeriesModel 530470W3831AAAAA motor. Hightorque output.SPECIFICATIONS• Disp. 28.3 cu. in. / rev. • Mount wheel mount• Motor Type Geroler • Shaft 1½˝ tapered x 4.53˝• PSI 2500 cont., 2750 int. w/1⅛-18 thread and nut• Torque 9700 in-lbs. cont. • Rqd. filtration• Torque 10475 in-lbs. int. • Ports ½ BSP• RPM 160 cont., 200 int. • Case drain none• GPM 20 cont., 24 int. • Size 5.21˝ x 5.21˝ x 7.16˝• Rotation reversible • Shpg. 41 lbs.

ITEM 9-8092 $179.99• Kit of ITEM 9-7735 above with one ITEM9-9003 5-bolt hub. Shpg. 51 lbs.

45.6 cu. in.Hyd.

WheelMotor

ITEM 9-9339 $399.95• New, WHITE DRIVE PRODUCTS Model701750W8A31AAAAA DT series hydraulicmotor. Extremely high torque from a com-pact wheel motor. Heavy duty roller bear-ings support side loads. Ships with castlenut.SPECIFICATIONS• Disp. 45.6 cu. in. / rev. • Motor type roller stator• PSI 2500 cont., 3000 int. • Rotation reversible• Torque 15,750 in-lbs. cont.; 18,500 in-lbs. int.• RPM 130 cont., 150 int. • GPM 25 cont., 30 int.• Wheel mount 4 bolts on 513/16˝ B.C., ½˝ bolt holesStepped pilot O.D. 3¾˝ & 3½˝

• Shaft 1½˝ tapered & keyed, 3.09˝ overall lengthEnd threaded 1⅛-18 x ¾˝ long

• Ports ½˝ BSPP • Case drain ¼˝ BSPP• Size 11⅛˝ x 5¼˝ x 5¼˝ • Shpg. 51 lbs.

ITEM 9-10419 $409.95• Kit of ITEM 9-9339 above with one ITEM9-9003 5-bolt hub. Shpg. 60 lbs.


Hydraulic BreatherCapAssembly

ITEM 20-1279 $7.99• NEW UCC breather cap assembly madeof nylon and polypropylene. Requires 2½˝diameter opening. 10 micron filter elementin cap to keep out contaminants. Integraloil filter. Lockable cap. Shpg. 1 lb.

ITEM 20-1277-A $9.99• Same as ITEM 20-1279 above except 5PSI bypass valve helps prevent pump cav-itation. Shpg. 1 lb.

¾˝ NPT MagneticDrain Plug

ITEM 9-8096$2.20• Brand new. Square head magnetic plug.Ideal for use as a drain plug in hydraulicreservoirs. Corrosion resistant plated steel,threads coated with sealant.SPECIFICATIONS • Width across flats ⅝˝• ¾˝ NPT magnetic drain plug • Shpg. ¼ lb.

&

¾˝ NPT BreatherCapITEM 9-7957-12$4.49• Brand new, BUYERS PRODUCTS ModelHBF12P plastic breather cap. These unitsact as ventilators to provide a free flow ofclean, fresh air into hydraulic fluid reservoirs.Large oil resistant filter elements filter dirtand dust particles as small as 40 micron.SPECIFICATIONS • Size 111/16˝ diam. x 1⅞˝• Connection ¾˝ NPTM • Shpg. ¼ lb.

ReservoirSight LevelGauges

• Brand new, ZINGA seriesSG reservoir sight levelgauge. Dual scale ther-mometer. Aluminum guard.For use with petroleum andwater base hydraulic fluids.SPECIFICATIONS • Thermometer range• ½˝-13 UN bolts 30° F to 210° F• Shpg. 1 lb. 0° C to 100° C

ITEM 9-7287-3 $14.95• 3˝ mtg. centers. Size 4½˝ x 113/16˝ x 1⅞˝.

ITEM 9-7287-5 $16.95• 5˝ mtg. centers. Size 6⅞˝ x 113/16˝ x 1⅞˝.

ITEM 9-7287-10 $20.99• 10˝ mtg. centers. Size 11⅞˝ x 113/16˝ x 1⅞˝.

TankBreathers

• Brand new, ZINGA MBseries tank breather.Shatter resistant plasticconstruction.SPECIFICATIONS FOR ALL• 10 Micron filtration • Size 111/16˝ diam. x 1⅝˝• Temperatures up to 225° F• Shpg. ¼ lb.

ITEM 9-7285-25 $6.70• ¼˝ NPT male connection.

ITEM 9-7285-38 $6.70• ⅜˝ NPT male connection.

ITEM 9-7285-50 $12.95• ½˝ NPT male connection.

ITEM 9-7285-75 $12.99• ¾˝ NPT male connection.

Reservoir Filler/BreatherCapITEM 9-7286$9.85• Brand new, ZINGA se-ries WSFB reservoir fillerand breather cap. Blackpainted steel weatherresistant twist-on cap.1½˝ opening on base. Installs into 2˝ holewith gaskets and self-tapping screws. SPECIFICATIONS • 6 bolt holes on 2.88˝ BC• 10 micron foam filter • Basket 115/16˝ dia. x 5⅝˝• 6˝ dipstick • Size 35/16˝ diam. x 81/16˝• 30 mesh epoxy basket • Shpg. 1½ lbs.

Fluid LevelSight Glass

ITEM 9-7288$5.50• Brand new, ZINGA series OE oil eye fluidlevel sight glass. Weld into reservoir sidefor quick visual reference of reservoir’s fluidlevel. Clear nylon sight glass and non-plated steel base.SPECIFICATIONS • Fits into 15/16˝ diam. hole• 400 PSI max. • Size 1¼˝ dia. x 13/16˝ tall• Temp. -65° F to 150° F • Shpg. ½ lb.

Steel Heat ExchangerITEM 9-7395$19.95

• New, HARRISON 85A heat exchanger.Painted steel.SPECIFICATIONS • Four bolt mount on• Ports 1½˝ x 8⅜˝ centers

5/16˝ SAE inverted flare • Size 11⅛˝ x 4˝ x 3⅛˝⅝˝ hosebarbs • Shpg. 5 lbs.

FilteredBreather• Use when double actingcylinder is operated as singleacting to keep out dirt whenretracting. Use on reservoirtanks or where air must bedisplaced. Replaceable filterfor cleaning. Size 2⅝˝ x 1¼˝ x1¼˝. Shpg. 5 oz.

ITEM 9-026-A ⅜˝ NPT $12.95ITEM 9-026-B ½˝ NPT $12.95Low ProfileBreathers• Bronze filter. Shpg. ¼ lb.

ITEM 9-4195-2 ⅛˝ NPTM $2.19ITEM 9-4195-4 ¼˝ NPTM $3.19ITEM 9-4195-6 ⅜˝ NPTM $3.99ITEM 9-4195-8 ½˝ NPTM $4.49ITEM 9-4195-12 ¾˝ NPTM $7.49

BrassSight LevelGaugeITEM 9-7936$17.99• New, Model B-1145-12 straightbrass sight level gauge for oil orwater. Machined from brass stockwith sight glass protected by re-volvable shield. Protected venthole in cap.SPECIFICATIONS • Glass diam. ⅝˝• Type straight • Seals Buna N• Construction brass • Port ½˝ NPTwith glass sight • Overall height 11¼˝

• Sight length 921/32˝ • Shpg. 1 lb.

800-488-3407 Hydraulic Breathers & Sight Gauges 75

1 Gal. Hyd.Reservoir

ITEM 9-7177$8.95

• New, plastic hydraulic reservoir. No cover(top) plate. Cover plate mounts to reservoirwith eight tapped mounting holes.SPECIFICATIONS • Inner dimensions• 1 gallon capacity 9⅛˝ x 5¼˝ x 6˝• Ports ⅜˝ NPT, ¾˝ NPT • Size 101/16˝ x 6˝ x 8˝• Opening 711/16˝ x 43/16˝ • Shpg. 4 lbs.

Filler-Breather WeldFlange Adapter

ITEM 9-8097$4.35• Brand new. Weld-on adapter for mount-ing common hydraulic filler-breather as-semblies. Unpainted 12 gauge steel.SPECIFICATIONS • Center hole 2.125˝ dia.• Mtg. holes six 0.175˝ dia. • Size 4˝ O.D. x 1.125˝holes on 2.88˝ B.C. • Shpg. ½ lb.

76 Hydraulic Reservoirs www.surpluscenter.com8

Steel Hydraulic Reservoirs• Brand new, BUYERS hydraulic reservoirs with magnetic drain plug.

9.8 GallonITEM 9-7948 $139.95• Model SMR7S. Constructed of 10 & 12gauge black powder coated steel. All sidesare ported, allowing multiple positionmounting. Suc tion ports on opposingsides and bottom. Return ports on theother two sides and top. Whichever returnport is at the top of the tank is intended tobe used as the filler/breather port. Plasticbreather cap included. Plastic 1˝ NPTM to¾˝ NPTF bushing for breather cap.SPECIFICATIONS• Oil capacity 9.8 gal. nominal, 7 gal. usable• Ports: • Mount four bolt holes onSuction 1¼˝ NPT x three 14¼˝ x 9¼˝ centersReturn/Filler • Mounting holes 7/16˝ diam.1˝ NPT x three • Size 15¾˝ x 14⅞˝ x 11¾˝

Drain ¾˝ NPT x one • Shpg. 43 lbs.

15 GallonITEM 9-7949 $200.95• Model SMR15S. Constructed of 13 gaugeblack powder coated steel. Chromebreather cap with filler basket. Oil levelgauge with temperature indicator. Interiorbaffle between suction and return ports.One suction and one return port on eachside. Welded mounting angles can bedrilled for custom installation.SPECIFICATIONS• Oil capacity 15 gal. nominal, 11 gal. usable• Ports: • Mount welded mtg. anglesSuction 2˝ NPT x two • No mounting holesReturn 1¼˝ NPT x two • Size 159/16˝ x 13½˝ x 17½˝Drain ¾˝ NPT x one • Shpg. 59 lbs.

25 GallonITEM 9-7950 $227.95• Model SMR25S. Constructed of 13 gaugeblack powder coated steel. Chromebreather cap with filler basket. Oil levelgauge with temperature indicator. Interiorbaffle between suction and return ports.One suction and return port on each side.Welded mounting angles can be drilled forcustom installation.SPECIFICATIONS• Oil capacity 25 gal. nominal, 18 gal. usable• Ports: • Mount welded mtg. anglesSuction 2˝ NPT x two • No mounting holesReturn 1¼˝ NPT x two • Size 20˝ x 1413/16˝ x 201/16˝Drain ¾˝ NPT x one • Shpg. 71 lbs.

39.5 GallonITEM 9-7952 $372.95• Model SMR37S. Constructed of 12gauge black powder coated steel. Chromebreather cap with filler basket. Oil levelgauge with temperature indicator. Interiorbaffle between suction and return ports.Suction and return port on same side.Drain ½˝ NPT on bottom, on top side are¾˝ NPT drain and clean out. Weldedmounting angles can be drilled for custominstallation. Two “U” shaped brackets with0.725˝ inside diameter welded to the bot-tom of the tank and 13⅜˝ apart.SPECIFICATIONS• Oil capacity 39.5 gal. nominal, 37 gal. usable• Ports: Suction 2˝ NPT x one • Mount welded mtg. anglesReturn 1¼˝ NPT x one • No mounting holesDrain ¾˝ NPT x one • Size 231/16 ̋x 17¼ ̋x 231/16˝Drain ½˝ NPT x one • Shpg. 107 lbs.

37.1 GallonITEM 9-7951 $285.95• Model SMR30S. Constructed of 13gauge black powder coated steel. Chromebreather cap with filler basket. Oil levelgauge with temperature indicator. Interiorbaffle between suction and return ports.One suction and return port on each side.Drain ¾˝ NPT on bottom of tank. On top oftank are 1˝ NPT drain, filler, and ¼˝ NPT ac-cessory ports. Welded mounting anglescan be drilled for custom installation.SPECIFICATIONS• Oil capacity 37.1 gal. nominal, 30 gal. usable• Ports:Suction 2˝ NPT x twoReturn 1¼˝ NPT x two • Mount welded mtg. anglesDrain ¾˝ NPT x one • No mounting holesDrain 1˝ NPT x one • Size 24⅜˝ x 16˝ x 22˝Accessory ¼˝ NPT x one • Shpg. 92 lbs.

50 GallonITEM 9-8067 $409.95• Model SMS50S side mount steel hy-draulic reservoir with mounting bracket.Ideal for mobile applications. Constructedof 13 gauge steel. Steel brackets with steelbands that secure the reservoir to thebracket. Combination fluid sight level, ther-mometer gauge. Internal baffle. Breathercap with mesh filler basket. Two “U” shapedbrackets with 0.725˝ diameter welded to thebottom of the tank and 21¼˝ apart.SPECIFICATIONS• Oil capacity 50 gallon • Side mount• Ports: • Mounting bracket2˝ NPT x two • Size 25˝ x 239/16˝ x 26½˝ NPT x one • Shpg. 175 lbs.

Truck freight only.

55.2 GallonITEM 9-7953 $400.95• Model UR50S. Constructed of 12 gaugeblack powder coated steel. Chromebreather cap with filler basket. Oil levelgauge with temperature indicator. Inter-nally baffled between suction and returnports. Suction, return and drain ports onbottom of the tank. Welded mountingbrackets can be drilled custom installation.Mounting kit included. Mounting bracketsmust be drilled to attach mounting kit. Four“L” shaped brackets elevate tank offmounting surface. Mounting kit includeshardware to prevent twisting of the mount-ing frame from damaging the reservoir.SPECIFICATIONS• Oil capacity 55.2 gal. nominal, 50 gal. usable• Ports: • Mount welded mtg. anglesSuction 2˝ NPT x one • No mounting holesReturn 1¼˝ NPT x one • Size 34˝ x 14¾˝ x 25½˝Drain ¾˝ NPT x one • Shpg. 157 lbs.

Truck freight only.

70 GallonITEM 9-7954 $428.95• Model UR70S. Constructed of 12 gaugeblack powder coated steel. ¾˝ NPT mag-netic drain plug. Chrome breather cap withfiller basket. Oil level gauge with tempera-ture indicator. Internally baffled betweensuction and return ports. Suction, returnand drain ports on bottom of the tank.Welded mounting brackets can be drilledfor custom installation. Mounting kit in-cluded. Mounting brackets must be drilledto attach mounting kit. Four “L” shapedbrackets elevate tank off mounting sur-face. Mounting kit includes hardware toprevent twisting of the mounting framefrom damaging the reservoir.SPECIFICATIONS• Oil capacity 70 gal. nominal, 67.5 gal. usable• Ports: • Mount welded mtg. anglesSuction 2˝ NPT x one • No mounting holesReturn 1¼˝ NPT x one • Size 49¼˝ x 14¾˝ x 257/16˝Drain ¾˝ NPT x one • Shpg. 227 lbs.

Truck freight only.

70 GallonITEM 9-8068 $479.95• Model SMS70S side mount steel hy-draulic reservoir with mounting bracket.Ideal for mobile applications. Constructedof 13 gauge steel. Steel brackets with steelbands that secure the reservoir to thebracket. Combination fluid sight level, ther-mometer gauge. Internal baffle. Breathercap with mesh filler basket. Two “U” shapedbrackets with 0.725˝ diameter welded to thebottom of the tank and 37½˝ apart.SPECIFICATIONS• Oil capacity 70 gallon • Side mount• Ports: • Mounting bracket2˝ NPT x two • Size 35˝ x 239/16˝ x 26˝½˝ NPT x one • Shpg. 200 lbs.

Truck freight only.

ITEM 9-7948

ITEM 9-7949

ITEM 9-7950 & 9-7951

ITEM 9-7952

ITEM 9-7953 & 9-7954

ITEM 9-8067 & 9-8068

1½˝ Push-On Breather Cap

ITEM 9-8285 $3.99• Brand new, push-on plastic breather capfor 1½˝ outside diameter smooth filler tubeon hydraulic reservoirs. Black plastic con-struction with foam filter. Size 2¾˝ diameterx 1½˝. Shpg. ½ lb.

800-488-3407 Hydraulic Reservoirs 77&

50 Gallon Side MountITEM 9-8065 $561.95• Model SMR50P side mount polymer hy-draulic reservoir and mounting brackets.Lightweight and corrosion proof construc-tion. Aluminum brackets, with steel bandsthat secure reservoir to brackets. Combi-nation fluid sight level gauge and ther-mometer on face of reservoir. Twoaluminum port inserts bolted to oppositeface. No internal baffle or drain port. ¼ turnchrome breather cap, return line diffuser,2˝ NPT to 1¼˝ NPT reducer and all neces-sary mounting hardware included. Fill porthas no strainer basket.SPECIFICATIONS• Oil capacity 50 gallon • Mounting brackets• Ports 2˝ NPT x two • Size 31˝ x 23˝ x 23⅞˝• Side mount • Shpg. 136 lbs.

25 GallonITEM 9-8064 $284.95• Model SMR25P side mount polymer hy-draulic reservoir and mounting brackets.Lightweight and corrosion proof construc-tion. Steel mounting brackets. Combinationfluid sight level gauge and ther mo meter onface of reservoir. Aluminum port insertsmolded into both sides of the reservoir.One steel port molded into the bottom ofthe reservoir. Internal baffle. ¼ turn chromebreather cap, magnetic drain plug and allnecessary mounting hardware included. Fillport has no strainer basket.SPECIFICATIONS • Mounting holes 4 bolt on• Oil capacity 25 gallon 22½˝ x 8˝ centers• Ports 2˝ NPT x two • Size 24˝ x 18½˝ x 21⅞˝• Side mount • Shpg. 77 lbs.

50 Gallon UprightITEM 9-8066 $452.95• Model UR50P upright polymer hydraulicreservoir and mounting brackets. Light-weight and corrosion proof construction.Mounting plate and brackets. Mounting kitincludes hardware to prevent twisting ofmounting frame from damaging the reser-voir. Combination fluid sight level gaugeand thermometer on face of reservoir. Twoaluminum port inserts bolted to bottom.No internal baffle or drain port. ¼ turnchrome breather cap, return line diffuser,2˝ NPT to 1¼˝ NPT reducer and all neces-sary mounting hardware included. Fill porthas no strainer basket.SPECIFICATIONS• Oil capacity 50 gallon • Mounting plate• Ports 2˝ NPT x two • Size 38˝ x 16½˝ x 29˝• Base mount • Shpg. 115 lbs.

Due to size must ship truck freight only.

Weld-in Port Flanges

Forged Steel Stamped Steel

• Brand new. Weld-in port flanges. Ideal for building or modifyinghydraulic reservoirs. Available in forged steel or stamped steel.

Forged Steel Weld-In Port FlangesPort Flange Pilot Hole

ITEM Size O.D. Required Shpg. Price9-7843-2 ⅛˝ NPT 15/16˝ 1˝ ⅛ lb. $2.259-7843-4 ¼˝ NPT 15/16˝ 1˝ ⅛ lb. $2.409-7843-6 ⅜˝ NPT 15/16˝ 1˝ ⅛ lb. $2.509-7843-8 ½˝ NPT 1⅝˝ 1¼˝ ⅛ lb. $2.509-7843-12 ¾˝ NPT 2˝ 17/16˝ ¼ lb. $2.759-7843-16 1˝ NPT 2⅜˝ 1¾˝ ¼ lb. $2.959-7843-20 1¼˝ NPT 2⅝˝ 23/16˝ ¼ lb. $3.959-7843-24 1½˝ NPT 2⅞˝ 2⅜˝ ¼ lb. $4.509-7843-SAE24 SAE 24 2⅞˝ 2⅜˝ ¼ lb. $4.509-7843-32 2˝ NPT 3⅜˝ 211/16˝ ½ lb. $5.509-7843-40 2½˝ NPT 4⅛˝ 33/16˝ 1¼ lbs. $7.509-7843-48 3˝ NPT 4⅝˝ 311/16˝ 1½ lbs. $9.509-7843-64 4˝ NPT 5⅞˝ 413/16˝ 3 lbs. $19.95

Stamped Steel Weld-In Port FlangesPort Flange Pilot Hole

ITEM Size O.D. Required Shpg. Price9-7844-2 ⅛˝ NPT 1¾˝ 9/16˝ ⅛ lb. $2.009-7844-4 ¼˝ NPT 1¾˝ 11/16˝ ⅛ lb. $2.259-7844-6 ⅜˝ NPT 1¾˝ 13/16˝ ⅛ lb. $1.909-7844-8 ½˝ NPT 1¾˝ 1˝ ⅛ lb. $2.259-7844-12 ¾˝ NPT 2⅜˝ 13/16˝ ⅛ lb. $2.759-7844-16 1˝ NPT 2⅜˝ 17/16˝ ⅛ lb. $2.959-7844-20 1¼˝ NPT 2⅞˝ 113/16˝ ¼ lb. $2.759-7844-24 1½˝ NPT 3⅝˝ 21/16˝ ½ lb. $3.959-7844-32 2˝ NPT 3¾˝ 29/16˝ ½ lb. $4.25

Polymer Hydraulic Reservoirs• Brand new, BUYERS hydraulic reservoirs.

Surplus CenterHydraulicReservoirs

• Brand new, superiorquality hydraulic reservoirs.Constructed of 12 gauge,black powder-coated steel.Internal baffle.• One suction port, one re-turn port and one ¾˝ NPT drain with steelplug. Filler-breather has 10 micron foam filter, quarter-turncap, mesh basket, dipstick and padlock hasp. Integral mountingfoot on each end, four ⅜˝ mounting holes.• Select a reservoir with useable capacity at least equal to pumpflow GPM (e.g. 20 gallon reservoir minimum for system with 20GPM pump). Made in USA.

UseableCapacity

ITEM (Gallons) Ports Shpg. Price9-8103-3 3 1¼˝ NPT and ¾˝ NPT 16 lbs. $119.959-8103-5 5 1¼˝ NPT and ¾˝ NPT 22 lbs. $129.959-8103-10 10 1½˝ NPT and 1˝ NPT 40 lbs. $149.959-8103-15 15 2˝ NPT and 1½˝ NPT 55 lbs. $169.959-8103-20 20 2˝ NPT and 1½˝ NPT 65 lbs. $184.959-8103-25 25 2˝ NPT and 1½˝ NPT 83 lbs. $198.95

3˝ NPT TankStrainerITEM 9-10649$29.95• New ZINGA TF-1030-0 strainer thatmounts in hydraulic reservoir outlet port toprevent debris from being drawn into pump.SPECIFICATIONS• Tank port 3˝ NPT • Mesh size 100• Outlet port 1˝ NPT • Mesh dimen. 3˝ dia. x 3˝• Flow capacity 14 GPM • Overall length 4¾˝• No relief • Shpg. 2 lbs.

878 Hydraulic Strainers & Pump Mounts www.surpluscenter.com

Internal TankStrainers

• Brand new, ZINGATFS series tank strainer.Mount in hydraulicreservoir to keep debrisfrom being drawn intopump. Relief valveallows oil to bypass if screen becomesclogged to prevent pump cavitation. 100mesh. 3 PSI by-pass valve.

ITEM 9-7290-50 $16.95SPECIFICATIONS • Exposed mesh dimensions• 1˝ NPTM threads into tank 1⅛˝ diam. x 3½˝ long• ½˝ NPTF for hose connect • Overall length 5¼˝• 5 GPM capacity • Shpg. 1 lb.

ITEM 9-7290-75 $16.95SPECIFICATIONS • Exposed mesh dimensions• 1¼˝NPTM threads into tank 1½˝ diam. x 5½˝ long• ¾˝ NPTF for hose connect • Overall length 7˝• 8 GPM capacity • Shpg. 1 lb.

ITEM 9-7290-100 $19.95SPECIFICATIONS • Exposed mesh dimensions• 1½˝NPTM threads into tank 1¾˝ diam. x 59/16˝ long• 1˝ NPTF for hose connect • Overall length 7⅛˝• 14 GPM capacity • Shpg. 1 lb.

ITEM 9-7290-125 $22.95SPECIFICATIONS • Exposed mesh dimensions• 2˝ NPTM threads into tank 2¼˝ diam. x 77/16˝ long• 1¼˝ NPTF for hose connect • Overall length 9⅛˝• 23 GPM capacity • Shpg. 2 lbs.

ITEM 9-7290-200 $42.95SPECIFICATIONS • Exposed mesh dimensions• 3˝ NPTM threads into tank 2¼˝ diam. x 75/16˝ long• 2˝ NPTF for hose connect • Overall length 9½˝• 53 GPM capacity • Shpg. 3 lbs.

ITEM 9-7290-300 $59.95SPECIFICATIONS • Exposed mesh dimensions• 4˝ NPTM threads into tank 4¼˝ diam. x 6⅞˝ long• 3˝ NPTF for hose connect • Overall length 95/16˝• 116 GPM capacity • Shpg. 5 lbs.

HydraulicPumpMounts

Foot Mounts Motor to Pump Mounts Engine to Pump Mounts• Brand new, Hydra-Mount aluminum alloy pump mounts. Available as foot mounts, andadapters from gas engines or electric motors to a variety of common pump flanges.

Foot MountsPilot Centerline

ITEM Pump Flange Dia. Height Size Shpg. Price1-3242 4F17 (2˝ sq.) 1.78˝ 37/16˝ 3⅞˝ x 1½˝ x 4¾˝ 2 lbs. $23.951-3243 SAE AA (2 bolt, 3¼˝ c/c) 2˝ 37/16˝ 3⅞˝ x 1½˝ x 4¾˝ 2 lbs. $27.951-3244 SAE A (2 bolt, 43/16˝ c/c) 3.25˝ 3¼˝ 5⅛˝ x 4⅛˝ x 5¾˝ 3 lbs. $30.951-3245 SAE B (2 bolt, 5¾˝ c/c) 4˝ 5¼˝ 5½˝ x 3˝ x 8˝ 4 lbs. $39.95Electric Motor to Pump Mounts

Pilot TotalITEM Pump Flange Dia. Motor Frame Length Shpg. Price

1-3246 4F17 (2˝ sq.) 1.78˝ 56C, 143TC, 145TC 4¼˝ 5 lbs. $35.951-3247 SAE AA (2 bolt, 3¼˝ c/c) 2˝ 56C, 143TC, 145TC 4¼˝ 5 lbs. $35.951-3248 SAE A (2 bolt, 43/16˝ c/c) 3.25˝ 56C, 143TC, 145TC 4¼˝ 5 lbs. $35.95

1-3249 SAE A (2 bolt, 43/16˝ c/c) 3.25˝ 182TC, 184TC, 213TC 5˝ 5 lbs. $39.95215TC, 254TC, 256TC

1-2469* SAE B (2 bolt, 5¾˝ c/c) 4˝ 182TC, 184TC, 213TC 6⅞˝ 5 lbs. $38.95215TC, 254TC, 256TC

1-3437* SAE B (2 bolt, 5¾˝ c/c) 4˝ 284TC, 286TC 8˝ 14 lbs. $69.95and (4 bolt, 4⅛˝ c/c)

1-2441* SAE C (2 bolt, 7⅛˝ c/c) 5˝ 182TC, 184TC, 213TC 6⅞˝ 6 lbs. $39.95215TC, 254TC, 256TC*not Hydra-Mount

Gas Engine to Pump MountsPilot Total

ITEM Pump Flange Dia. Engine Mount Length Shpg. Price1-3236 4F17 (2˝ sq.) 1.78˝ 3⅝˝ bolt circle, 1⅝˝ pilot 4.44˝ 2 lbs. $34.951-3237 SAE AA (2 bolt, 3¼˝ c/c) 2˝ 3⅝˝ bolt circle, 1⅝˝ pilot 4.44˝ 2 lbs. $37.951-3238 SAE A (2 bolt, 43/16˝ c/c) 3.25˝ 3⅝˝ bolt circle, 1⅝˝ pilot 4.69˝ 2 lbs. $37.951-3239 4F17 (2˝ sq.) 1.78˝ 6½˝ bolt circle, 5¾˝ pilot 5⅝˝ 4 lbs. $47.951-3240 SAE AA (2 bolt, 3¼˝ c/c) 2˝ 6½˝ bolt circle, 5¾˝ pilot 5˝ 4 lbs. $43.951-3241 SAE A (2 bolt, 43/16˝ c/c) 3.25˝ 6½˝ bolt circle, 5¾˝ pilot 5⅛˝ 4 lbs. $43.95


4˝ NPTTankStrainer

ITEM 9-7642$49.95• New FLOW-EZY S100-100-RV3 strainerthat mounts in hydraulic reservoir outletport to prevent debris from being drawninto pump. Relief valve allows oil to bypassif screen becomes clogged to preventpump cavitation.SPECIFICATIONS• Tank port 4˝ NPT • Mesh size 100• Outlet port 3˝ NPT • Mesh dimensions• Flow capacity 100 GPM 4˝ diam. x 9⅝˝• Relief setting 3 PSI • Shpg. 5 lbs.

Zinga FilterElementITEM 9-6465-10$3.95• New ZINGA Model BE-10-0. Fits ZingaBF series filter heads. Replaces most fil-ters found on hydrostatic drive mowers.No by-pass valve.SPECIFICATIONS• ¾-16 mounting thread • No by-pass valve• 10 micron • Shpg. 1 lb.

SAE 24Tank Strainer& AccessoriesITEM 9-7884$9.99• New, tank strainer. Mount in hy-draulic reservoir to keep debrisfrom being drawn into pump.SPECIFICATIONS• Tank thread SAE 24 M • Exposed screen size• Outlet thread SAE 20 F 1⅝˝ dia. x 6½˝• Flow rate 20 GPM max. • Overall lgth. 8¼˝• Screen 100 mesh • Shpg. 1 lb.

Weld-in PortFlangeITEM 9-7843-SAE24 $4.50Hosebarb toSAE20M FittingITEM 9-4604-20-20 $10.25• 1¼˝ hosebarb.

ITEM 9-4604-24-20 $18.50• 1½˝ hosebarb.

TankTopFilter

ITEM 9-5934-A$13.99• New LHA return-line filter. Metal con-struction. Mounts on top of tank in 3½˝ di-ameter opening with 2 bolts. Element canbe easily changed from top using the re-movable cover.SPECIFICATIONS • Inlet port SAE 12 • Rated to 18 GPM max • Outlet 1⅛˝ dia. hosebarb• 10 micron cellulose element • 25 PSI bypass• Operating pressure in filter element100 PSI max • Shpg. 3 lbs.

800-488-3407 Hydraulic Filters 79&

High PressureInlineFilter

ITEM 9-7293$159.95• Brand new, ZINGA Se-ries P3000 high pressureinline filter. Ideal for exter-nal charge pump filtrationand high shock return linefiltration. Buna-N Seals.Visual differential pressureindicator.SPECIFICATIONS • Operating temp.• 10 micron filter -40° to 250° F• 30 GPM • By-pass valve setting 50 PSI• SAE 12 ports • Size 4˝ diam. x 13½˝• 3000 PSI max. • Shpg. 6 lbs.

Replacement Filter Element

ITEM 9-7293-10L 10 micron $33.95

Hydraulic ReturnLine FilterHousing

ITEM 9-6579$49.95• New EATON VICKERS.High performance lowpressure hydraulic filter foruse in return line. Ideal forin tank return line filter ap-plications. Furnished without filter element. Use Vick-ers V405 filter elements forthis filter assembly.SPECIFICATIONS• Model HL161E317NB • IN port on head SAE-J518• Flows to 150 GPM 1½˝ 4 bolt flange• 200 PSI max. • OUT port on bottom• 25 PSI bypass of filter 1½˝ NPTM• Size 7˝ x 7˝ x 32˝ • Shpg. 17 lbs.

High Pressure InlineFilter

ITEM 9-7292$149.95• Brand new, ZINGA series HP3000 highpressure inline filter. Ductile iron housing.Buna-N Seals. Visual differential pressureindicator.SPECIFICATIONS • 3000 PSI max.• 10 micron filter • By-pass valve setting 50 PSI• 60 GPM • Size 3˝ diam. x 9¾˝• SAE 12 ports • Shpg. 11 lbs.

Replacement Filter Element

ITEM 9-7292-10 10 micron $13.95

⅜˝ NPT ZingaReturnInlineFilterITEM 9-7291$12.95• Brand new, ZINGA.SPECIFICATIONS • Ports ⅜˝ NPT• 10 micron • 250° F max.return line application • Built-in 18 PSI by-pass

• 7 GPM return line • Size 3⅛˝ diam. x 4½˝• 200 PSI max. • Shpg. 1½ lbs.Replacement Filter Element

ITEM 9-7291-10-18 10 micron $7.05

Inline HighPress. FilterITEM 9-7297$79.95• Brand new, ZINGA Series CF-90 high pres-sure filter. Designed for use as final filter to pro-tect control valves, not as total system filter.SPECIFICATIONS • 3000 PSI max.• 12 GPM • By-pass valve setting 50 PSI• 10 micron • Size 5˝ x 2½˝ x 2˝• SAE 8 ports • Shpg. 3 lbs.Replacement Filter Element

ITEM 9-7297-10 10 micron $32.95

1½˝ NPTIn-LineFilters

• Brand new, ZINGA full flow filtering up tobypass cracking point, partial filtering be-yond. ⅛˝ NPT gauge port on inlet side.SPECIFICATIONS• 80 GPM return line • 250° F max.• 32 GPM suction line • Built-in by-pass• 200 PSI max. • Size 5⅛˝ diam. x 13⅞˝• Ports 1½˝ NPT • Shpg. 6 lbs.

Return Line Application (25 PSI Bypass)

ITEM 9-7294 10 micron $39.95Suction Line Application (5 PSI Bypass)

ITEM 9-7295 25 micron $39.95Replacement Filter Elements

ITEM 9-7294-10 10 micron $18.95• Return line application only.

ITEM 9-7294-25 25 micron $18.95

¾˝ NPTIn-LineFilters

• Brand new. 10 or 25 micron. Full flow fil-tering up to bypass cracking point, partialfiltering beyond..SPECIFICATIONS• 20 GPM return line • 250° F max.• 9 GPM suction line • Built-in by-pass• 100 PSI max. • Size 7½˝ x 3¾˝ x 3½˝• Ports ¾˝ NPT • Shpg. 3 lbs.




ITEM 9-059-10 10 micron $7.05ITEM 9-059-33 25 micron $7.05

1¼˝ NPTVolumeFilters

• Brand new ZINGA. Spin-on type ele-ment. Ports 1¼˝ NPT.SPECIFICATIONS• 70 GPM return line • 250° F max.• 25 GPM suction line • Built-in by-pass• 200 PSI max. • Size 5⅜˝ diam. x 9⅜˝• Ports 1¼˝ NPT • Shpg. 6 lbs.




ITEM 9-4543-10 10 micron $13.95ITEM 9-4543-25 25 micron $13.95Condition Indicator Gauge

ITEM 9-4544-G 25 micron $9.95• For use on ITEMS 9-077, 9-7295, 9-4544suction line filters only. Shpg. ½ lb.

Zinga Spin-On Filter Assemblies


80 Hydraulic Hose & Hose Clamps www.surpluscenter.com8

Suction ReturnLine Hose

• Brand new. Top quality.Connect reservoir to pump,low pressure return lines toreservoir. Meets SAE spec.100-R4. Textile fiber and wirespiral reinforced. Tough, oil-proof rubber cover.ITEM 9-1195 $4.00• ¾˝ ID. Rated 300 PSI.Shpg. 7 oz./ft.

ITEM 9-1279 $5.00• 1˝ ID. Rated 250 PSI.Shpg. 10 oz./ft.

ITEM 9-1956 $6.00• 1¼˝ ID. Rated 300 PSI.Shpg. 12 oz./ft.

ITEM 9-1957 $9.00• 1½˝ ID. Rated 300 PSI.Shpg. 16 oz./ft.

Two Wire Braid Hose

Lgth. ITEM Shpg. Price ITEM Shpg. Price ITEM Shpg. Price ITEM Shpg. Price 12˝ 918-3212 1 lb. $ 6.00 917-2212 1 lb. $ 7.00 9-078-12 1½ lbs. $11.00 919-2212 2 lbs. $ 16.00 18˝ 918-3218 1 lb. $ 7.00 917-2218 1 lb. $ 8.00 9-078-18 1¾ lbs. $13.00 919-2218 2 lbs. $ 20.00 24˝ 918-3224 1½ lbs. $ 7.00 917-2224 1¼ lbs. $ 9.00 9-078-24 3 lbs. $15.00 919-2224 3 lbs. $ 23.00 30˝ 918-3230 1½ lbs. $ 8.00 917-2230 1½ lbs. $10.00 9-078-30 3 lbs. $16.00 919-2230 4 lbs. $ 26.00 36˝ 918-3236 2 lbs. $ 9.00 917-2236 1½ lbs. $11.00 9-078-36 3 lbs. $18.00 919-2236 4 lbs. $ 29.00 48˝ 918-3248 3 lbs. $11.00 917-2248 2 lbs. $13.00 9-078-48 4 lbs. $21.00 919-2248 5 lbs. $ 35.00 60˝ 918-3260 3 lbs. $13.00 917-2260 2 lbs. $15.00 9-078-60 5 lbs. $25.00 919-2260 6 lbs. $ 41.00 72˝ 918-3272 3 lbs. $15.00 917-2272 3 lbs. $17.00 9-078-72 6 lbs. $28.00 919-2272 7 lbs. $ 47.00 84˝ 918-3284 3 lbs. $17.00 917-2284 3 lbs. $20.00 9-078-84 7 lbs. $32.00 919-2284 8 lbs. $ 53.00 96˝ 918-3296 5 lbs. $19.00 917-2296 4 lbs. $22.00 9-078-96 7 lbs. $35.00 919-2296 9 lbs. $ 59.00 108˝ 918-32108 6 lbs. $21.00 917-22108 5 lbs. $24.00 9-078-108 8 lbs. $38.00 919-22108 10 lbs. $ 65.00 120˝ 918-32120 7 lbs. $23.00 917-22120 6 lbs. $26.00 9-078-120 9 lbs. $42.00 919-22120 11 lbs. $ 71.00 144˝ 918-32144 8 lbs. $27.00 917-22144 7 lbs. $30.00 9-078-144 10 lbs. $49.00 919-22144 13 lbs. $ 83.00 180˝ 918-32180 10 lbs. $32.00 917-22180 8 lbs. $35.00 9-078-180 14 lbs. $58.00 919-22180 16 lbs. $101.00 240˝ 918-32240 13 lbs. $41.00 917-22240 11 lbs. $45.00 9-078-240 17 lbs. $75.00 919-22240 21 lbs. $132.00 300˝ 918-32300 15 lbs. $51.00 917-22300 14 lbs. $55.00 9-078-300 20 lbs. $92.00 919-22300 26 lbs. $161.00

NPT Hydraulic Hose Lengths• Brand new. Top quality, wire braid with NPT male fittings each end.

One Wire Braid Hose

Lgth. ITEM Shpg. Price ITEM Shpg. Price ITEM Shpg. Price 12˝ 916-1412 1 lb. $ 5.00 903-3812 1 lb. $ 6.00 905-1212 1 lb. $ 6.00 18˝ 916-1418 1 lb. $ 6.00 903-3818 1 lb. $ 6.00 905-1218 1 lb. $ 7.00 24˝ 916-1424 1 lb. $ 6.00 903-3824 1¼ lbs. $ 7.00 905-1224 1¼ lbs. $ 8.00 30˝ 916-1430 1¼ lbs. $ 7.00 903-3830 1¼ lbs. $ 8.00 905-1230 1½ lbs. $ 9.00 36˝ 916-1436 1¼ lbs. $ 8.00 903-3836 1½ lbs. $ 9.00 905-1236 1½ lbs. $10.00 48˝ 916-1448 1½ lbs. $ 9.00 903-3848 1½ lbs. $10.00 905-1248 2 lbs. $11.00 60˝ 916-1460 1½ lbs. $10.00 903-3860 2 lbs. $11.00 905-1260 2 lbs. $13.00 72˝ 916-1472 1¾ lbs. $12.00 903-3872 2 lbs. $13.00 905-1272 3 lbs. $14.00 84˝ 916-1484 1¾ lbs. $13.00 903-3884 3 lbs. $14.00 905-1284 3 lbs. $16.00 96˝ 916-1496 2 lbs. $15.00 903-3896 4 lbs. $16.00 905-1296 4 lbs. $18.00 108˝ 916-14108 3 lbs. $16.00 903-38108 5 lbs. $18.00 905-12108 5 lbs. $19.00 120˝ 916-14120 4 lbs. $18.00 903-38120 6 lbs. $20.00 905-12120 6 lbs. $21.00 144˝ 916-14144 5 lbs. $21.00 903-38144 7 lbs. $22.00 905-12144 7 lbs. $25.00 180˝ 916-14180 6 lbs. $25.00 903-38180 8 lbs. $27.00 905-12180 8 lbs. $29.00 240˝ 916-14240 8 lbs. $32.00 903-38240 10 lbs. $35.00 905-12240 11 lbs. $38.00 300˝ 916-14300 9 lbs. $40.00 903-38300 12 lbs. $42.00 905-12300 14 lbs. $46.00

¼˝ ID• ¼˝ NPT solid male fittings

• Working/burst 3000/12,000 PSI

⅜˝ ID• ⅜˝ NPT solid male fittings


½˝ ID• ½˝ NPT solid male fittings


¾˝ ID• ¾˝ NPT solid male fittings

• Working/burst 2250/9000 PSI

1˝ ID• 1˝ NPT solid male fittings


⅜˝ ID• ⅜˝ NPT solid male fittings


½˝ ID• ½˝ NPT solid male fittings


PERFT.

PERFT.

PERFT.

PERFT.

Surplus Center HoseITEM Type Clamp Opening Hose Size Item Number Prefix Size Shpg. Price

9-A2-135 Single 13.5 mm (0.53˝) ¼˝ Single Wire 916 1.89˝ x 1.18˝ x 1.54˝ ½ lb. $2.259-A2-14 Single 14 mm (0.55˝) ¼˝ Two Wire 920, 921 1.89˝ x 1.18˝ x 1.54˝ ½ lb. $2.259-A2-172 Single 17.2 mm (0.67˝) ⅜˝ Single Wire 903 1.89˝ x 1.18˝ x 1.54˝ ½ lb. $2.409-A2-18 Single 18 mm (0.71˝) ⅜˝ Two Wire 918, 930, 931 1.89˝ x 1.18˝ x 1.54˝ ½ lb. $2.259-A3-20 Single 20 mm (0.79˝) ½˝ Single Wire 905 2.17˝ x 1.18˝ x 1.61˝ ½ lb. $2.559-A3-213 Single 21.3 mm (0.84˝) ½˝ Two Wire 940, 941 2.17˝ x 1.18˝ x 1.61˝ ½ lb. $2.559-A4-28 Single 28 mm (1.10˝) ¾˝ Single Wire 9-078 2.44˝ x 1.18˝ x 1.89˝ ¾ lb. $3.159-A4-30 Single 30 mm (1.18˝) ¾˝ Two Wire 950, 951 2.44˝ x 1.18˝ x 1.89˝ ¾ lb. $3.159-A5-38 Single 38 mm (1.50˝) 1˝ Two Wire 919 2.91˝ x 1.18˝ x 2.52˝ ¾ lb. $3.65

Hydraulic Hose Clamps• Brand new, hydraulic hose mounting clamp. Weld onto equipment to route hoses. Steeltop and bottom plates with polypropylene clamp set. Single hose styles (dual style onnext page). See chart below for specifications to match your requirements.

& 800-488-3407 Hydraulic Hose & Hose Clamps 81

Two Wire Braid Hose

Lgth. ITEM Shpg. Price ITEM Shpg. Price ITEM Shpg. Price ITEM Shpg. Price 12˝ 940-2212 1 lb. $10.00 941-2212 1 lb. $10.00 950-2212 2 lbs. $15.00 951-2212 2 lbs. $15.00 18˝ 940-2218 1 lb. $11.00 941-2218 1 lb. $11.00 950-2218 2 lbs. $17.00 951-2218 2 lbs. $17.00 24˝ 940-2224 1¼ lbs. $12.00 941-2224 1¼ lbs. $12.00 950-2224 3 lbs. $18.00 951-2224 3 lbs. $19.00 30˝ 940-2230 1½ lbs. $13.00 941-2230 1½ lbs. $14.00 950-2230 3 lbs. $20.00 951-2230 3 lbs. $21.00 36˝ 940-2236 1½ lbs. $14.00 941-2236 1½ lbs. $15.00 950-2236 3 lbs. $22.00 951-2236 3 lbs. $23.00 48˝ 940-2248 2 lbs. $16.00 941-2248 2 lbs. $17.00 950-2248 4 lbs. $26.00 951-2248 4 lbs. $26.00 60˝ 940-2260 2 lbs. $18.00 941-2260 2 lbs. $19.00 950-2260 5 lbs. $30.00 951-2260 5 lbs. $30.00 72˝ 940-2272 3 lbs. $21.00 941-2272 3 lbs. $21.00 950-2272 6 lbs. $34.00 951-2272 6 lbs. $34.00 84˝ 940-2284 3 lbs. $23.00 941-2284 3 lbs. $24.00 950-2284 7 lbs. $37.00 951-2284 7 lbs. $38.00 96˝ 940-2296 4 lbs. $25.00 941-2296 4 lbs. $26.00 950-2296 8 lbs. $41.00 951-2296 8 lbs. $42.00 108˝ 940-22108 5 lbs. $27.00 941-22108 5 lbs. $28.00 950-22108 9 lbs. $45.00 951-22108 9 lbs. $45.00 120˝ 940-22120 6 lbs. $30.00 941-22120 6 lbs. $30.00 950-22120 10 lbs. $49.00 951-22120 10 lbs. $49.00 144˝ 940-22144 7 lbs. $34.00 941-22144 7 lbs. $35.00 950-22144 11 lbs. $56.00 951-22144 11 lbs. $57.00 180˝ 940-22180 8 lbs. $41.00 941-22180 8 lbs. $42.00 950-22180 15 lbs. $68.00 951-22180 15 lbs. $68.00 240˝ 940-22240 11 lbs. $52.00 941-22240 11 lbs. $53.00 950-22240 19 lbs. $87.00 951-22240 19 lbs. $87.00 300˝ 940-22300 14 lbs. $63.00 941-22300 14 lbs. $64.00 950-22300 22 lbs. $106.00 951-22300 22 lbs. $106.00

JIC Hydraulic Hose Lengths• Brand new. Top quality, 2 wire braid with JIC female fittings each end.

Two Wire Braid Hose

Lgth. ITEM Shpg. Price ITEM Shpg. Price ITEM Shpg. Price ITEM Shpg. Price 12˝ 920-2212 1 lb. $ 7.00 921-2212 1 lb. $ 7.00 930-2212 1 lb. $ 7.00 931-2212 1 lb. $ 8.00 18˝ 920-2218 1 lb. $ 8.00 921-2218 1 lb. $ 8.00 930-2218 1 lb. $ 8.00 931-2218 1 lb. $ 9.00 24˝ 920-2224 1 lb. $ 9.00 921-2224 1 lb. $ 9.00 930-2224 1½ lbs. $ 9.00 931-2224 1½ lbs. $10.00 30˝ 920-2230 1¼ lbs. $10.00 921-2230 1¼ lbs. $10.00 930-2230 1½ lbs. $10.00 931-2230 1½ lbs. $11.00 36˝ 920-2236 1¼ lbs. $11.00 921-2236 1¼ lbs. $11.00 930-2236 2 lbs. $11.00 931-2236 2 lbs. $12.00 48˝ 920-2248 1½ lbs. $12.00 921-2248 1½ lbs. $12.00 930-2248 3 lbs. $13.00 931-2248 3 lbs. $14.00 60˝ 920-2260 1½ lbs. $14.00 921-2260 1½ lbs. $14.00 930-2260 3 lbs. $15.00 931-2260 3 lbs. $16.00 72˝ 920-2272 1¾ lbs. $16.00 921-2272 1¾ lbs. $16.00 930-2272 3 lbs. $17.00 931-2272 3 lbs. $18.00 84˝ 920-2284 1¾ lbs. $18.00 921-2284 1¾ lbs. $18.00 930-2284 3 lbs. $20.00 931-2284 3 lbs. $20.00 96˝ 920-2296 2 lbs. $20.00 921-2296 2 lbs. $20.00 930-2296 5 lbs. $22.00 931-2296 5 lbs. $22.00 108˝ 920-22108 3 lbs. $22.00 921-22108 3 lbs. $22.00 930-22108 6 lbs. $24.00 931-22108 6 lbs. $24.00 120˝ 920-22120 4 lbs. $24.00 921-22120 4 lbs. $24.00 930-22120 7 lbs. $26.00 931-22120 7 lbs. $26.00 144˝ 920-22144 5 lbs. $27.00 921-22144 5 lbs. $27.00 930-22144 8 lbs. $30.00 931-22144 8 lbs. $31.00 180˝ 920-22180 6 lbs. $33.00 921-22180 6 lbs. $33.00 930-22180 10 lbs. $36.00 931-22180 10 lbs. $37.00 240˝ 920-22240 8 lbs. $42.00 921-22240 8 lbs. $42.00 930-22240 13 lbs. $46.00 931-22240 13 lbs. $47.00 300˝ 920-22300 9 lbs. $51.00 921-22300 9 lbs. $51.00 930-22300 15 lbs. $57.00 931-22300 15 lbs. $57.00

¼˝ ID• Working/burst 5000/20,000 PSI

⅜˝ ID• Working/burst 4000/16,000 PSI

½˝ ID• Working/burst 3500/14,000 PSI

¾˝ ID• Working/burst 3000/12,000 PSI

JIC 4F Swivel Fittings JIC 6F Swivel Fittings JIC 6F Swivel Fittings JIC 8F Swivel Fittings

JIC 8F Swivel Fittings JIC 10F Swivel Fittings JIC 10F Swivel Fittings JIC 12F Swivel Fittings

Surplus Center HoseITEM Type Clamp Opening Hose Size Item Number Prefix Size Shpg. Price

9-A2-135-D Dual 13.5 mm (0.53˝) ¼˝ Single Wire 916 2.17˝ x 1.18˝ x 1.42˝ 1 lb. $3.159-A2-14-D Dual 14 mm (0.55˝) ¼˝ Two Wire 920, 921 2.17˝ x 1.18˝ x 1.42˝ 1 lb. $3.309-A2-172-D Dual 17.2 mm (0.67˝) ⅜˝ Single Wire 903 2.17˝ x 1.18˝ x 1.42˝ 1 lb. $3.309-A2-18-D Dual 18 mm (0.71˝) ⅜˝ Two Wire 918, 930, 931 2.17˝ x 1.18˝ x 1.42˝ 1 lb. $3.309-A3-20-D Dual 20 mm (0.79˝) ½˝ Single Wire 905 2.76˝ x 1.18˝ x 1.85˝ 1 lb. $3.459-A3-213-D Dual 21.3 mm (0.84˝) ½˝ Two Wire 940, 941 2.76˝ x 1.18˝ x 1.85˝ 1 lb. $3.709-A4-28-D Dual 28 mm (1.10˝) ¾˝ Single Wire 9-078 3.35˝ x 1.18˝ x 2.05˝ 1½ lbs. $3.959-A4-30-D Dual 30 mm (1.18˝) ¾˝ Two Wire 950, 951 3.35˝ x 1.18˝ x 2.05˝ 1½ lbs. $3.959-A5-38-D Dual 38 mm (1.50˝) 1˝ Two Wire 919 4.33˝ x 1.18˝ x 2.52˝ 1½ lbs. $5.00

Hydraulic Hose Clamps• Brand new, hydraulic hose mounting clamp. Weld onto equipment to route hoses. Steeltop and bottom plates with polypropylene clamp set. Dual hose styles (single style on pre-vious page). See chart below for specifications to match your requirements.

82 Hydraulic Quick Couplers & Swivels www.surpluscenter.com8

Hydraulic QuickCouplerTips

• New, FARMER HYDRAULICS. Agri cultural OEM style re-placement male tips for hydraulic quick couplers. Ball check.Shpg. ½ lb.

International Harvester Style

ITEM 9-5146 ½˝ NPT $3.95ITEM 9-5146-8 SAE 10 $3.95

Safeway S40 Quick-CouplerCombo

• New, SAFEWAY ModelS40-3 hydraulic quickcoupler. Consists ofSAFEWAY Model S45-3female half and S41-3

male half. Not for use when connecting under pressure. Two-waysleeve for ease in coupling and for bulkhead break-away applica-tions. Inter changeable half-for-half with Parker/ Pioneer 4200 Se-ries.

ITEM 9-7381 Coupler Combo $8.95SPECIFICATIONS• ⅜˝ NPT female ports • 3000 PSI max. • Size 15/16˝ O.D. x 3˝• 2 piece coupler • 6 GPM rated flow • Shpg. 1 lb.

ITEM 9-7381-F Female coupler half only ½ lb. $3.95ITEM 9-6347-A Male tip only ½ lb. $5.35

Flush Face Quick Couplers

• New, Gates HTMA flush face quickcoupler. Includes body and tip. Flushface gives superior sealing and lessair introduction into hydraulic system.Used on many skid steer applica-tions.SPECIFICATIONS FOR ALL• Pressure 3000 PSI working, 12,000 PSI burst

¼˝ NPT Ports ITEM 9-7698 $32.95• Body Gates 4FQFF-4FP, Tip Gates 4MQFF-4FP. Size 1⅛˝ dia. x4˝. Shpg. 1 lb.

¾˝ NPT Ports ITEM 9-7700 $59.95• Body Gates 12FQFF-12FP, Tip Gates 12MQFF-12FP. Size 2˝ dia.x 6˝. Shpg. 4 lbs.

1˝ NPT Ports ITEM 9-7701 $89.95• Body Gates 16FQFF-16FP, Tip Gates 16MQFF-16FP. Size 2¼˝dia. x 6¾˝. Shpg. 6 lbs.

HydraulicLiveSwivels

• Brand new SUPER-SWIVELS hydraulic live swivels. Allow hosesto rotate even when fully pressurized. Zinc-plated steel with Nitrileseals. One end of the fitting must be connected to a flexible hose.-15°F to 250°F temperature range. NPTF-swivel (NPTF-S) portswill swivel for installation only.

90° Elbow Live Swivel Rigid ITEM Port Port PSI Shpg. Price 9-LV1501-4-4 ¼˝ NPTM ¼˝ NPTF-S 3500 1 lb. $45.00 9-LV1501-6-6 ⅜˝ NPTM ⅜˝ NPTF-S 3500 1½ lbs. $51.00 9-LV1501-8-8 ½˝ NPTM ½˝ NPTF-S 3500 2 lbs. $51.00 9-LV1501-12-12 ¾˝ NPTM ¾˝ NPTF-S 3500 2 lbs. $68.00 9-LV2501-4-4 JIC 4M ¼˝ NPTM 3500 1 lb. $45.00 9-LV2501-6-6 JIC 6M ⅜˝ NPTM 3500 1½ lbs. $51.00 9-LV2501-8-8 JIC 8M ½˝ NPTM 3500 2 lbs. $51.00 9-LV2501-12-12 JIC 12M ¾˝ NPTM 3500 2 lbs. $68.00 9-LV5504-4-4 ¼˝ NPTF ¼˝ NPTF 5000 1 lb. $45.00 9-LV5504-6-6 ⅜˝ NPTF ⅜˝ NPTF 5000 1½ lbs. $51.00 9-LV5504-8-8 ½˝ NPTF ½˝ NPTF 5000 2 lbs. $51.00 9-LV5504-12-12 ¾˝ NPTF ¾˝ NPTF 4500 2 lbs. $68.00 9-LV6801-4-4 SAE 4M JIC 4M 3500 1 lb. $45.00 9-LV6801-6-6 SAE 6M JIC 6M 3500 1½ lbs. $51.00 9-LV6801-8-8 SAE 8M JIC 8M 3500 2 lbs. $51.00 9-LV6801-10-10 SAE 10M JIC 10M 3500 2 lbs. $58.00 9-LV6801-12-12 SAE 12M JIC 12M 3500 3 lbs. $68.00 9-LV6901-4-4 SAE 4M ¼˝ NPTF-S 3500 1 lb. $45.00 9-LV6901-6-6 SAE 6M ⅜˝ NPTF-S 3500 1½ lbs. $51.00 9-LV6901-8-8 SAE 8M ½˝ NPTF-S 3500 2 lbs. $51.00 9-LV6901-12-12 SAE 12M ¾˝ NPTF-S 3500 3 lbs. $68.00

Inline Live Swivel Rigid ITEM Port Port PSI Shpg. Price 9-LV5000-4-4 ¼˝ NPTF ¼˝ NPTF 5000 1 lb. $39.00 9-LV5000-6-6 ⅜˝ NPTF ⅜˝ NPTF 5000 1½ lbs. $41.00 9-LV5000-8-8 ½˝ NPTF ½˝ NPTF 5000 2 lbs. $43.00 9-LV5000-12-12 ¾˝ NPTF ¾˝ NPTF 4500 2 lbs. $54.00

Hydraulic Quick Couplers and Tips

• Brand new SAFEWAY. Two piece couplers. ITEM 9-6314,9-6352 and 928-C are two way sleeve type. Can be discon-nected by pulling sleeve either direction. Ball check designprevents leakage when disconnected.

Complete Coupler Extra Tip Thread ITEM Flow PSI Model Type Shpg Price ITEM Model Shpg. Price ¼˝ NPT 9-1626 3 5000 S10-2 Poppet 1 lb. $16.95 9-1626-A S101-2 ½ lb. $4.95 ¼˝ NPT 9-6314 3 3000 S40-2 Ball 1 lb. $15.95 9-5924 S41-2 ½ lb. $3.95 ⅜˝ NPT 9-6347 6 3000 S20-3 Ball 1 lb. $16.95 9-6347-A S41-3 ½ lb. $4.95 ½˝ NPT 928 12 3000 S20-4 Ball 1½ lbs. $16.95 928-AA S71-4 ½ lb. $4.95 SAE 8 9-6352 12 3000 S70-15P Poppet 1½ lbs. $29.95 9-5923 S71-15P ½ lb. $4.25 ¾˝ NPT 928-C 12 3000 S40-6 Ball 1½ lbs. $24.95 928-D S71-6 1 lb. $7.95

9-LV6801

9-LV69019-LV5504 9-LV2501

9-LV1501 9-LV5000

800-488-3407 Hydraulic Fittings & Adapters 83&

Bushing

9-5406-4-2 ¼˝ M x ⅛˝ F ¼ $ .709-5406-6-2 ⅜˝ M x ⅛˝ F ¼ $ .909-5406-6-4 ⅜˝ M x ¼˝ F ¼ $ 1.009-5406-8-4 ½˝ M x ¼˝ F ¼ $ 1.459-5406-8-6 ½˝ M x ⅜˝ F ¼ $ 1.409-5406-12-4 ¾˝ M x ¼˝ F ¼ $ 2.359-5406-12-6 ¾˝ M x ⅜˝ F ¼ $ 2.359-5406-12-8 ¾˝ M x ½˝ F ¼ $ 2.259-5406-16-12 1˝ M x ¾˝ F ¼ $ 2.309-5406-20-12 1¼˝ M x ¾˝ F ½ $ 3.909-5406-20-16 1¼˝ M x 1˝ F ½ $ 3.959-5406-24-12 1½˝ M x ¾˝ F ½ $ 8.009-5406-24-16 1½˝ M x 1˝ F ½ $ 8.009-5406-24-20 1½˝ M x 1¼˝ F ½ $ 8.009-5406-32-20 2˝ M x 1¼˝ F 1 $12.009-5406-32-24 2˝ M x 1½˝ F 1 $12.00

Hex HeadNPT Plug

9-5406-P-2 ⅛˝ NPT ⅛ $ .309-5406-P-4 ¼˝ NPT ⅛ $ .409-5406-P-6 ⅜˝ NPT ¼ $ .709-5406-P-8 ½˝ NPT ¼ $ 1.159-5406-P-12 ¾˝ NPT ½ $ 2.109-5406-P-16 1˝ NPT ½ $ 2.299-5406-P-20 1¼˝ NPT ¾ $ 3.999-5406-P-24 1½˝ NPT 1½ $ 7.009-5406-P-32 2˝ NPT 1½ $12.50

Hollow Hex HeadNPT Plug

9-5406-HP-2 ⅛˝ NPT ⅛ $ .359-5406-HP-4 ¼˝ NPT ⅛ $ .409-5406-HP-6 ⅜˝ NPT ¼ $ .499-5406-HP-8 ½˝ NPT ¼ $ .759-5406-HP-12 ¾˝ NPT ¼ $ 1.259-5406-HP-16 1˝ NPT ½ $ 2.059-5406-HP-20 1¼˝ NPT ½ $ 3.309-5406-HP-24 1½˝ NPT ¾ $ 8.00

NPT M to NPT M90° Elbow

9-5500-4-4 ¼˝ M x ¼˝ M ¼ $ 2.859-5500-6-6 ⅜˝ M x ⅜˝ M ¼ $ 2.859-5500-8-8 ½˝ M x ½˝ M ¼ $ 2.909-5500-12-12 ¾˝ M x ¾˝ M ¼ $ 5.009-5500-16-16 1˝ M x 1˝ M ½ $10.00

NPT F to NPT F90° Elbow

9-5504-4-4 ¼˝ F x ¼˝ F ¼ $ 2.759-5504-6-6 ⅜˝ F x ⅜˝ F ¼ $ 2.709-5504-8-8 ½˝ F x ½˝ F ¼ $ 3.159-5504-12-12 ¾˝ F x ¾˝ F ¼ $ 5.009-5504-16-16 1˝ F x 1˝ F ½ $ 8.00

Hydraulic Fittings & Adapters• Brand new corrosion resistant plated steel hydraulic fittings.

ITEM Size Shpg. Price ITEM Size Shpg. Price ITEM Size Shpg. Price

NPT FCoupler

9-5000-2-2 ⅛˝ x ⅛˝ ¼ $ 1.159-5000-4-4 ¼˝ x ¼˝ ¼ $ 1.559-5000-6-6 ⅜˝ x ⅜˝ ¼ $ 2.859-5000-8-8 ½˝ x ½˝ ¼ $ 2.709-5000-12-12 ¾˝ x ¾˝ ¼ $ 2.309-5000-16-16 1˝ x 1˝ ¼ $ 5.00

NPT M / M Hex Nipple

9-5404-4-4 ¼˝ M x ¼˝ M ¼ $ .959-5404-6-6 ⅜˝ M x ⅜˝ M ¼ $ 1.309-5404-8-8 ½˝ M x ½˝ M ¼ $ 1.659-5404-12-12 ¾˝ M x ¾˝ M ¼ $ 2.659-5404-16-16 1˝ M x 1˝ M 1 $ 4.159-5404-20-20 1¼˝ M x 1¼˝ M 1 $ 7.75

NPT M to NPT FConnector

9-5405-2-2 ⅛˝ M x ⅛˝ F ¼ $ 4.159-5405-2-4 ⅛˝ M x ¼˝ F ¼ $ 1.909-5405-2-6 ⅛˝ M x ⅜˝ F ¼ $ 1.759-5405-2-8 ⅛˝ M x ½˝ F ½ $ 5.009-5405-4-4 ¼˝ M x ¼˝ F ¼ $ 2.959-5405-4-6 ¼˝ M x ⅜˝ F ¼ $ 1.959-5405-4-8 ¼˝ M x ½˝ F ½ $ 2.959-5405-4-12 ¼˝ M x ¾˝ F ¾ $ 9.159-5405-6-6 ⅜˝ M x ⅜˝ F ¼ $ 3.859-5405-6-8 ⅜˝ M x ½˝ F ½ $ 2.909-5405-6-12 ⅜˝ M x ¾˝ F ¾ $ 6.009-5405-8-6 ½˝ M x ⅜˝ F ¼ $ 2.509-5405-8-8 ½˝ M x ½˝ F ½ $ 5.509-5405-8-12 ½˝ M x ¾˝ F ½ $ 4.499-5405-8-16 ½˝ M x 1˝ F ¾ $ 9.959-5405-12-8 ¾˝ M x ½˝ F ½ $ 3.759-5405-12-12 ¾˝ M x ¾˝ F ½ $ 3.259-5405-12-16 ¾˝ M x 1˝ F ¾ $ 9.009-5405-12-20 ¾˝ M x 1¼˝ F 1 $11.009-5405-16-16 1˝ M x 1˝ F ¾ $10.009-5405-16-20 1˝ M x 1¼˝ F 1 $14.259-5405-16-24 1˝ M x 1½˝ F 1½ $29.959-5405-20-20 1¼˝ M x 1¼˝ F 1 $14.509-5405-20-24 1¼˝ M x 1½˝ F 1½ $17.959-5405-24-24 1½˝ M x 1½˝ F 1½ $19.959-5405-24-32 1½˝ M x 2˝ F 3 $32.95

NPTCap

9-5406-C-2 ⅛˝ NPT ⅛ $ .859-5406-C-4 ¼˝ NPT ⅛ $ .759-5406-C-6 ⅜˝ NPT ⅛ $ 1.059-5406-C-8 ½˝ NPT ¼ $ 2.059-5406-C-12 ¾˝ NPT ¼ $ 2.709-5406-C-16 1˝ NPT ¼ $ 2.75

NPT M to NPT F90° Street Elbow

9-5502-2-2 ⅛˝ M x ⅛˝ F ¼ $ 2.459-5502-4-4 ¼˝ M x ¼˝ F ¼ $ 2.609-5502-6-6 ⅜˝ M x ⅜˝ F ¼ $ 2.409-5502-8-8 ½˝ M x ½˝ F ¼ $ 3.159-5502-12-12 ¾˝ M x ¾˝ F ¼ $ 5.009-5502-16-16 1˝ M x 1˝ F ½ $ 8.00

NPT M to NPT F45° Street Elbow

9-5503-2-2 ⅛˝ M x ⅛˝ F ¼ $ 2.309-5503-4-4 ¼˝ M x ¼˝ F ¼ $ 2.709-5503-6-6 ⅜˝ M x ⅜˝ F ¼ $ 2.259-5503-8-8 ½˝ M x ½˝ F ¼ $ 3.109-5503-12-12 ¾˝ M x ¾˝ F ¼ $ 5.009-5503-16-16 1˝ M x 1˝ F ½ $10.00

NPT FTee

9-5605-2-2-2 ⅛˝ x ⅛˝ x ⅛˝ ¼ $ 2.859-5605-4-4-4 ¼˝ x ¼˝ x ¼˝ ¼ $ 2.659-5605-6-6-6 ⅜˝ x ⅜˝ x ⅜˝ ¼ $ 3.159-5605-8-8-8 ½˝ x ½˝ x ½˝ ¼ $ 5.009-5605-12-12-12 ¾˝ x ¾˝ x ¾˝ ¼ $ 7.009-5605-16-16-16 1˝ x 1˝ x 1˝ ½ $10.00

SAE F to NPT MConnector

9-6404-4-4 SAE 4 x ¼˝ NPT ¼ $ 2.009-6404-6-6 SAE 6 x ⅜˝ NPT ¼ $ 2.659-6404-6-8 SAE 6 x ½˝ NPT ¼ $ 2.859-6404-8-6 SAE 8 x ⅜˝ NPT ¼ $ 2.959-6404-8-8 SAE 8 x ½˝ NPT ¼ $ 2.859-6404-10-8 SAE 10 x ½˝ NPT ¼ $ 2.709-6404-12-8 SAE 12 x ½˝ NPT ¼ $ 6.009-6404-12-12 SAE 12 x ¾˝ NPT ¼ $ 5.009-6404-16-12 SAE 16 x ¾˝ NPT ¼ $ 8.009-6404-16-16 SAE 16 x 1˝ NPT ½ $ 9.00

SAE M to NPT MConnector

9-6401-4-4 SAE 4 x ¼˝ NPT ¼ $ 1.309-6401-6-6 SAE 6 x ⅜˝ NPT ¼ $ 1.559-6401-8-8 SAE 8 x ½˝ NPT ½ $ 1.759-6401-10-8 SAE 10 x ½˝ NPT ½ $ 2.709-6401-12-12 SAE 12 x ¾˝ NPT ½ $ 2.959-6401-16-16 SAE 16 x 1˝ NPT ¾ $ 5.00

84 Hydraulic Fittings & Adapters www.surpluscenter.com8

NPT FSwivel

9-1405-4-4 ¼˝ F x ¼˝ F ½ $ 2.009-1405-6-6 ⅜˝ F x ⅜˝ F ½ $ 2.509-1405-8-8 ½˝ F x ½˝ F ¾ $ 2.259-1405-12-12 ¾˝ F x ¾˝ F ¾ $ 3.959-1405-16-16 1˝ F x 1˝ F 1 $ 6.009-1405-20-20 1¼˝ F x 1¼˝ F 1½ $ 9.95

NPT M / F90° Swivel Elbow

9-1501-2-4 ⅛˝ M x ¼˝ F ¼ $ 2.809-1501-4-4 ¼˝ M x ¼˝ F ½ $ 2.359-1501-6-6 ⅜˝ M x ⅜˝ F ½ $ 2.959-1501-6-8 ⅜˝ M x ½˝ F ½ $ 3.909-1501-8-6 ½˝ M x ⅜˝ F ¾ $ 3.309-1501-8-8 ½˝ M x ½˝ F ¾ $ 3.409-1501-8-12 ½˝ M x ¾˝ F 1 $ 6.009-1501-12-8 ¾˝ M x ½˝ F 1 $ 6.209-1501-12-12 ¾˝ M x ¾˝ F 1 $ 6.909-1501-12-16 ¾˝ M x 1˝ F 1 $10.009-1501-16-12 1˝ M x ¾˝ F 1 $10.909-1501-16-16 1˝ M x 1˝ F 1 $ 8.009-1501-16-20 1˝ M x 1¼˝ F 1 $14.009-1501-20-20 1¼˝ M x 1¼˝ F 2 $17.50

NPT F / F90° Swivel Elbow

9-1502-4-4 ¼˝ F x ¼˝ F ½ $ 2.809-1502-6-6 ⅜˝ F x ⅜˝ F ½ $ 2.709-1502-8-8 ½˝ F x ½˝ F ½ $ 3.909-1502-12-12 ¾˝ F x ¾˝ F ¾ $ 6.409-1502-16-16 1˝ F x 1˝ F 1 $11.509-1502-20-20 1¼˝ F x 1¼˝ F 1¼ $17.95

NPT M / F45° Swivel Elbow

9-1503-4-4 ¼˝ NPT x ¼˝ F ¼ $ 2.959-1503-6-6 ⅜˝ NPT x ⅜˝ F ½ $ 3.259-1503-8-8 ½˝ NPT x ½˝ F ¾ $ 4.059-1503-12-12 ¾˝ NPT x ¾˝ F ¾ $ 6.259-1503-16-16 1˝ NPT x 1˝ F 1 $10.359-1503-20-20 1¼˝ NPT x 1¼˝ F 1¼ $14.75

NPT F / F / MTee Swivel

9-1601-4-4-4 ¼˝ F x ¼˝ F x ¼˝M ½ $ 5.009-1601-6-6-6 ⅜˝ F x ⅜˝ F x ⅜˝M ½ $ 6.009-1601-8-8-8 ½˝ F x ½˝ F x ½˝M ¾ $ 7.009-1601-12-12-12 ¾˝ F x ¾˝ F x ¾˝M 1 $11.509-1601-16-16-16 1˝ F x 1˝ F x 1˝M 1¼ $14.95

SAE M to NPT FConnector

9-6405-4-4 SAE 4 x ¼˝ NPT ¾ $ 2.199-6405-5-4 SAE 5 x ¼˝ NPT ¾ $ 6.009-6405-6-4 SAE 6 x ¼˝ NPT ¾ $ 2.859-6405-6-6 SAE 6 x ⅜˝ NPT ¾ $ 1.899-6405-6-8 SAE 6 x ½˝ NPT ¾ $ 2.859-6405-8-4 SAE 8 x ¼˝ NPT ¾ $ 2.699-6405-8-6 SAE 8 x ⅜˝ NPT ¾ $ 1.859-6405-8-8 SAE 8 x ½˝ NPT ¾ $ 2.499-6405-10-8 SAE 10 x ½˝ NPT ¾ $ 2.259-6405-10-12 SAE 10 x ¾˝ NPT ¾ $ 5.159-6405-12-8 SAE 12 x ½˝ NPT ¾ $ 3.809-6405-12-12 SAE 12 x ¾˝ NPT ¾ $ 4.759-6405-14-12 SAE 14 x ¾˝ NPT ¾ $ 5.159-6405-16-12 SAE 16 x ¾˝ NPT ¾ $ 5.259-6405-16-16 SAE 16 x 1˝ NPT ¾ $ 5.959-6405-20-16 SAE 20 x 1˝ NPT ¾ $ 8.259-6405-20-20 SAE 20 x 1¼˝ NPT ¾ $ 9.959-6405-24-24 SAE 24 x 1½˝ NPT ¾ $15.00

SAE M to NPT F90° Elbow

9-6805-4-4 SAE 4 x ¼˝ NPT ¼ $ 3.759-6805-6-6 SAE 6 x ⅜˝ NPT ¼ $ 3.809-6805-8-8 SAE 8 x ½˝ NPT ½ $ 5.009-6805-12-12 SAE 12 x ¾˝ NPT ½ $ 7.009-6805-16-16 SAE 16 x 1˝ NPT ¾ $10.00

SAE M to NPT M90° Elbow

9-6806-4-4 SAE 4 x ¼˝ NPT ¼ $ 2.309-6806-6-6 SAE 6 x ⅜˝ NPT ¼ $ 3.309-6806-8-6 SAE 8 x ⅜˝ NPT ½ $ .899-6806-8-8 SAE 8 x ½˝ NPT ½ $ 5.009-6806-12-12 SAE 12 x ¾˝ NPT ½ $ 7.009-6806-16-16 SAE 16 x 1˝ NPT ¾ $ 9.00

NPT M to NPT FSwivel

9-1404-2-4 ⅛˝ M x ¼˝ F ¼ $ 2.009-1404-4-4 ¼˝ M x ¼˝ F ¼ $ 1.659-1404-6-6 ⅜˝ M x ⅜˝ F ¼ $ 2.609-1404-6-8 ⅜˝ M x ½˝ F ¼ $ 2.909-1404-8-6 ½˝ M x ⅜˝ F ¾ $ 2.909-1404-8-8 ½˝ M x ½˝ F ¾ $ 2.909-1404-8-12 ½˝ M x ¾˝ F ¾ $ 4.359-1404-12-8 ¾˝ M x ½˝ F 1 $ 3.809-1404-12-12 ¾˝ M x ¾˝ F 1 $ 3.509-1404-12-16 ¾˝ M x 1˝ F 1 $ 6.259-1404-16-12 1˝ M x ¾˝ F 1 $ 6.009-1404-16-16 1˝ M x 1˝ F 1 $ 5.909-1404-20-20 1¼˝ M x 1¼˝ F 1 $10.00



NPT F / F / FTee Swivel

9-1602-4-4-4 ¼˝ F x ¼˝ F x ¼˝ F ¾ $ 5.009-1602-6-6-6 ⅜˝ F x ⅜˝ F x ⅜˝ F ¾ $ 7.009-1602-8-8-8 ½˝ F x ½˝ F x ½ F˝ 1 $ 7.009-1602-12-12-12 ¾˝ F x ¾˝ F x ¾˝ F 1¼ $11.009-1602-16-16-16 1˝ F x 1˝ F x 1˝ F 2 $20.50

NPT FTee Swivel

9-1603-4-4-4 ¼˝ x ¼˝ x ¼˝ ¾ $ 5.009-1603-6-6-6 ⅜˝ x ⅜˝ x ⅜˝ ¾ $ 7.009-1603-8-8-8 ½˝ x ½˝ x ½˝ 1 $ 8.009-1603-12-12-12 ¾˝ x ¾˝ x ¾˝ 1¼ $11.759-1603-16-16-16 1˝ x 1˝ x 1˝ 2 $27.50

SAE M to NPT FSwivel

9-6900-4-4 SAE 4 x ¼˝ NPT ¼ $ 1.699-6900-5-4 SAE 5 x ¼˝ NPT ¼ $ 3.909-6900-6-4 SAE 6 x ¼˝ NPT ¼ $ 2.059-6900-6-6 SAE 6 x ⅜˝ NPT ¼ $ 2.459-6900-6-8 SAE 6 x ½˝ NPT ¼ $ 3.999-6900-8-6 SAE 8 x ⅜˝ NPT ½ $ 2.859-6900-8-8 SAE 8 x ½˝ NPT ½ $ 2.859-6900-8-12 SAE 8 x ¾˝ NPT ½ $ 6.009-6900-10-8 SAE 10 x ½˝ NPT ½ $ 2.259-6900-10-12 SAE 10 x ¾˝ NPT ½ $ 3.699-6900-12-8 SAE 12 x ½˝ NPT ¾ $ 3.799-6900-12-12 SAE 12 x ¾˝ NPT ¾ $ 3.49

SAE M to NPT F90° Swivel Elbow

9-6901-6-4 SAE 6 x ¼˝ NPT ½ $ 3.409-6901-6-6 SAE 6 x ⅜˝ NPT ½ $ 4.809-6901-8-6 SAE 8 x ⅜˝ NPT ¾ $ 4.459-6901-8-8 SAE 8 x ½˝ NPT ¾ $ 5.509-6901-8-12 SAE 8 x ¾˝ NPT 1 $10.009-6901-10-8 SAE 10 x ½˝ NPT 1 $ 5.509-6901-10-12 SAE 10 x ¾˝ NPT 1¼ $ 8.559-6901-12-8 SAE 12 x ½˝ NPT 1¼ $ 7.759-6901-12-12 SAE 12 x ¾˝ NPT 1¼ $ 7.00

SAE M to NPT F45° Swivel Elbow

9-6902-6-6 SAE 6 x ⅜˝ NPT ½ $ 3.259-6902-8-6 SAE 8 x ⅜˝ NPT ¾ $ 5.959-6902-8-8 SAE 8 x ½˝ NPT ¾ $ 5.959-6902-8-12 SAE 8 x ¾˝ NPT 1 $ 5.009-6902-10-8 SAE 10 x ½˝ NPT 1 $ 6.959-6902-10-12 SAE 10 x ¾˝ NPT 1¼ $ 9.009-6902-12-8 SAE 12 x ½˝ NPT 1¼ $10.009-6902-12-12 SAE 12 x ¾˝ NPT 1¼ $ 9.00


Hosebarb toNPT M

300 PSI max.

9-4404-4-4 ¼˝ hose x ¼˝ NPT ¼ $ 3.109-4404-6-6 ⅜˝ hose x ⅜˝ NPT ¼ $ 2.509-4404-8-8 ½˝ hose x ½˝ NPT ¼ $ 2.959-4404-12-12 ¾˝ hose x ¾˝ NPT ¼ $ 5.009-4404-16-16 1˝ hose x 1˝ NPT ¼ $ 6.009-4404-20-20 1¼˝ hose x 1¼˝ NPT ½ $ 9.759-4404-24-24 1½˝ hose x 1½˝ NPT ½ $12.50

Hosebarb to NPT M90° Elbow300 PSI max.

9-4501-8-6 ½˝ hose x ⅜˝ NPT ¼ $ 3.259-4501-8-8 ½˝ hose x ½˝ NPT ¼ $ 4.399-4501-12-8 ¾˝ hose x ½˝ NPT ¼ $ 6.009-4501-12-12 ¾˝ hose x ¾˝ NPT ½ $ 5.009-4501-16-12 1˝ hose x ¾˝ NPT ½ $ 8.009-4501-16-16 1˝ hose x 1˝ NPT ½ $ 8.49

BSPP M to NPT FConnector

9-8855-4-4 ¼˝ BSPP x ¼˝ NPT ¼ $ 5.159-8855-6-6 ⅜˝ BSPP x ⅜˝ NPT ¼ $ 9.959-8855-8-8 ½˝ BSPP x ½˝ NPT ½ $ 8.109-8855-12-12 ¾˝ BSPP x ¾˝ NPT ¾ $12.959-8855-16-16 1˝ BSPP x 1˝ NPT ¾ $20.95

SAE M to SAE FConnector

9-6410-4-6 4M x 6F ¼ $ 3.159-6410-6-4 6M x 4F ¼ $ 2.859-6410-6-6 6M x 6F ¼ $ 6.009-6410-6-8 6M x 8F ¼ $ 4.559-6410-8-4 8M x 4F ¼ $ 4.259-6410-8-6 8M x 6F ¼ $ 2.509-6410-8-10 8M x 10F ¼ $ 3.909-6410-8-12 8M x 12F ½ $ 9.009-6410-10-4 10M x 4F ¼ $ 6.959-6410-10-6 10M x 6F ½ $ 3.409-6410-10-8 10M x 8F ½ $ 2.609-6410-10-12 10M x 12F ½ $ 5.009-6410-12-4 12M x 4F ½ $ 9.859-6410-12-6 12M x 6F ½ $ 5.009-6410-12-8 12M x 8F ½ $ 3.159-6410-12-10 12M x 10F ½ $ 5.659-6410-12-12 12M x 12F ½ $ 8.009-6410-12-16 12M x 16F ½ $10.009-6410-16-4 16M x 4F ½ $15.959-6410-16-6 16M x 6F ½ $12.959-6410-16-8 16M x 8F ½ $ 6.259-6410-16-10 16M x 10F ½ $ 6.009-6410-16-12 16M x 12F ¾ $ 5.509-6410-16-20 16M x 20F 1¼ $19.959-6410-20-10 20M x 10F ¾ $19.959-6410-20-12 20M x 12F ¾ $10.009-6410-20-16 20M x 16F 1 $10.009-6410-20-24 20M x 24F 1¾ $21.75

JIC M to NPT MConnectors

9-2404-4-4 JIC 4 x ¼˝ NPT ¼ $ .859-2404-4-6 JIC 4 x ⅜˝ NPT ¼ $ 1.399-2404-6-6 JIC 6 x ⅜˝ NPT ¼ $ 1.059-2404-6-8 JIC 6 x ½˝ NPT ¼ $ 1.409-2404-8-8 JIC 8 x ½˝ NPT ½ $ 1.459-2404-8-12 JIC 8 x ¾˝ NPT ½ $ 2.209-2404-10-8 JIC 10 x ½˝ NPT ½ $ 1.759-2404-10-12 JIC 10 x ¾˝ NPT ¾ $ 2.909-2404-12-12 JIC 12 x ¾˝ NPT ¾ $ 2.559-2404-12-16 JIC 12 x 1˝ NPT ¾ $ 3.299-2404-16-16 JIC 16 x 1˝ NPT ¾ $ 2.40

JIC M to NPT FConnector

9-2405-4-4 JIC 4 x ¼˝ NPT ¼ $ 1.309-2405-6-6 JIC 6 x ⅜˝ NPT ¼ $ 1.459-2405-8-8 JIC 8 x ½˝ NPT ½ $ 1.809-2405-12-12 JIC 12 x ¾˝ NPT ¾ $ 3.309-2405-16-16 JIC 16 x 1˝ NPT ¾ $ 5.00

JIC M to NPT M90° Elbow

9-2501-4-4 JIC 4 x ¼˝ NPT ¼ $ 2.059-2501-6-6 JIC 6 x ⅜˝ NPT ¼ $ 2.799-2501-8-8 JIC 8 x ½˝ NPT ½ $ 3.399-2501-10-8 JIC 10 x ½˝ NPT ½ $ 3.999-2501-10-12 JIC 10 x ¾˝ NPT ¾ $ 5.399-2501-12-12 JIC 12 x ¾˝ NPT ¾ $ 5.599-2501-16-16 JIC 16 x 1˝ NPT ¾ $ 5.00

JIC M to NPT M45° Elbow

9-2503-4-4 JIC 4 x ¼˝ NPT ¼ $ 2.259-2503-6-4 JIC 6 x ¼˝ NPT ¼ $ 2.859-2503-6-6 JIC 6 x ⅜˝ NPT ¼ $ 1.909-2503-6-8 JIC 6 x ½˝ NPT ¼ $ 2.709-2503-8-6 JIC 8 x ⅜˝ NPT ¼ $ 2.409-2503-8-8 JIC 8 x ½˝ NPT ¼ $ 3.009-2503-10-8 JIC 10 x ½˝ NPT ¼ $ 3.009-2503-12-8 JIC 12 x ½˝ NPT ¼ $ 5.009-2503-12-12 JIC 12 x ¾˝ NPT ½ $ 3.759-2503-16-16 JIC 16 x 1˝ NPT ½ $ 6.00

JIC F to NPT MSwivel

9-6505-4-4 JIC 4 x ¼˝ NPT ¼ $ 2.599-6505-5-4 JIC 5 x ¼˝ NPT ¼ $ 5.009-6505-6-4 JIC 6 x ¼˝ NPT ¼ $ 2.859-6505-6-6 JIC 6 x ⅜˝ NPT ¼ $ 2.859-6505-8-6 JIC 8 x ⅜˝ NPT ¼ $ 3.399-6505-8-8 JIC 8 x ½˝ NPT ¼ $ 3.099-6505-10-8 JIC 10 x ½˝ NPT ¼ $ 5.009-6505-10-12 JIC 10 x ¾˝ NPT ¼ $ 6.009-6505-12-8 JIC 12 x ½˝ NPT ¼ $ 5.009-6505-12-12 JIC 12 x ¾˝ NPT ½ $ 6.009-6505-16-12 JIC 16 x ¾˝ NPT ½ $ 8.009-6505-16-16 JIC 16 x 1˝ NPT ½ $ 8.00

JIC F to NPT FSwivel

9-6506-4-4 JIC 4 x ¼˝ NPT ¼ $ 5.799-6506-6-4 JIC 6 x ¼˝ NPT ¼ $ 2.959-6506-6-6 JIC 6 x ⅜˝ NPT ¼ $ 3.799-6506-6-8 JIC 6 x ½˝ NPT ¼ $ 5.009-6506-8-6 JIC 8 x ⅜˝ NPT ¼ $ 5.799-6506-8-8 JIC 8 x ½˝ NPT ¼ $ 5.009-6506-10-6 JIC 10 x ⅜˝ NPT ¼ $22.099-6506-10-8 JIC 10 x ½˝ NPT ¼ $ 5.009-6506-10-12 JIC 10 x ¾˝ NPT ½ $ 6.009-6506-12-8 JIC 12 x ½˝ NPT ½ $ 7.009-6506-12-12 JIC 12 x ¾˝ NPT ½ $ 6.999-6506-14-12 JIC 14 x ¾˝ NPT ¾ $21.399-6506-16-16 JIC 16 x 1˝ NPT 1 $ 8.00

ORFS M to NPT MConnector

9-FF2404-4-4 ORFS 4 x ¼˝ NPT ¼ $ 1.809-FF2404-6-6 ORFS 6 x ⅜˝ NPT ¼ $ 2.209-FF2404-8-8 ORFS 8 x ½˝ NPT ¼ $ 2.459-FF2404-10-8 ORFS 10 x ½˝ NPT ¼ $ 3.009-FF2404-12-12 ORFS 12 x ¾˝ NPT ½ $ 2.759-FF2404-16-16 ORFS 16 x 1˝ NPT ½ $ 4.00

ORFS M to NPT M90° Elbow

9-FF2501-4-4 ORFS 4 x ¼˝ NPT ¼ $ 3.009-FF2501-6-6 ORFS 6 x ⅜˝ NPT ¼ $ 2.709-FF2501-8-8 ORFS 8 x ½˝ NPT ¼ $ 3.459-FF2501-10-8 ORFS 10 x ½˝ NPT ¼ $ 5.009-FF2501-12-12 ORFS 12 x ¾˝ NPT ½ $ 7.009-FF2501-16-16 ORFS 16 x 1˝ NPT ½ $ 9.00




86 Hydraulic Fittings & Adapters www.surpluscenter.com8



SAE M to SAE F90° Elbow

9-6815-4-4 4M x 4F ¼ $ 2.759-6815-6-6 6M x 6F ½ $ 3.259-6815-8-8 8M x 8F ½ $ 5.009-6815-12-12 12M x 12F ¾ $ 8.009-6815-16-16 16M x 16F ¾ $11.00

Hex HeadSAE Thread Plugs

9-6408-4 SAE 4 ¼ $ .609-6408-5 SAE 5 ¼ $ .899-6408-6 SAE 6 ¼ $ .859-6408-8 SAE 8 ¼ $ 1.109-6408-10 SAE 10 ¼ $ 1.459-6408-12 SAE 12 ¼ $ 2.509-6408-14 SAE 14 ¼ $ 2.959-6408-16 SAE 16 ¼ $ 3.209-6408-20 SAE 20 ¼ $ 5.009-6408-24 SAE 24 ¼ $ 8.00

SAE M to JIC FConnector

9-6402-4-4 SAE 4 x JIC 4 ¼ $ 3.599-6402-6-6 SAE 6 x JIC 6 ¼ $ 4.999-6402-8-8 SAE 8 x JIC 8 ½ $ 4.299-6402-10-10 SAE 10 x JIC 10 ½ $ 5.499-6402-12-12 SAE 12 x JIC 12 ¾ $ 6.999-6402-16-16 SAE 16 x JIC 16 ¾ $11.99

SAE M to JIC F90° Swivel Elbow

9-6809-4-4 SAE 4 x JIC 4 ¼ $ 2.659-6809-6-6 SAE 6 x JIC 6 ¼ $ 3.559-6809-8-8 SAE 8 x JIC 8 ½ $ 5.009-6809-10-10 SAE 10 x JIC 10 ½ $ 6.009-6809-12-12 SAE 12 x JIC 12 ¾ $ 8.009-6809-16-16 SAE 16 x JIC 16 ¾ $ 9.65

JIC M to SAE M Connectors

9-6400-4-3 JIC 4 x SAE 3 ¼ $ 1.009-6400-4-4 JIC 4 x SAE 4 ¼ $ .859-6400-4-5 JIC 4 x SAE 5 ¼ $ 1.109-6400-4-6 JIC 4 x SAE 6 ¼ $ 1.059-6400-6-6 JIC 6 x SAE 6 ¼ $ .999-6400-6-8 JIC 6 x SAE 8 ¼ $ 1.309-6400-8-6 JIC 8 x SAE 6 ½ $ 1.609-6400-8-8 JIC 8 x SAE 8 ½ $ 1.509-6400-8-12 JIC 8 x SAE 12 ½ $ 2.959-6400-10-10 JIC 10 x SAE 10 ½ $ 2.459-6400-12-10 JIC 12 x SAE 10 ¾ $ 2.899-6400-12-12 JIC 12 x SAE 12 ¾ $ 2.899-6400-12-16 JIC 12 x SAE 16 ¾ $ 3.999-6400-16-16 JIC 16 x SAE 16 ¾ $ 4.199-6400-16-20 JIC 16 x SAE 20 ¾ $ 7.99

JIC M to SAE M 90° Swivel Elbow

9-6801-4-4 JIC 4 x SAE 4 ¼ $ 2.499-6801-6-6 JIC 6 x SAE 6 ¼ $ 2.899-6801-8-8 JIC 8 x SAE 8 ½ $ 4.199-6801-8-12 JIC 8 x SAE 12 ½ $ 6.399-6801-10-10 JIC 10 x SAE 10 ¾ $ 5.599-6801-10-12 JIC 10 x SAE 12 ¾ $ 6.199-6801-12-10 JIC 12 x SAE 10 ¾ $ 7.399-6801-12-12 JIC 12 x SAE 12 ¾ $ 7.39

JIC M to SAE MLong 90° Elbow

9-6801-L-4-4 JIC 4 x SAE 4 ¼ $ 2.409-6801-L-6-6 JIC 6 x SAE 6 ¼ $ 2.559-6801-L-8-8 JIC 8 x SAE 8 ½ $ 5.009-6801-L-10-10 JIC 10 x SAE 10 ½ $ 6.009-6801-L-12-12 JIC 12 x SAE 12 ½ $ 8.00

JIC M to SAE M45° Elbow

9-6802-4-4 JIC 4 x SAE 4 ¼ $ 2.859-6802-6-6 JIC 6 x SAE 6 ¼ $ 2.309-6802-8-8 JIC 8 x SAE 8 ½ $ 3.009-6802-10-10 JIC 10 x SAE 10 ½ $ 5.009-6802-12-10 JIC 12 x SAE 10 ½ $ 6.009-6802-12-12 JIC 12 x SAE 12 ½ $ 6.009-6802-16-16 JIC 16 x SAE 16 ¾ $ 9.00

JIC M / JIC M / SAE MTee

9-6803-4-4-4 JIC 4 x JIC 4 x SAE 4 ½ $ 2.559-6803-6-6-6 JIC 6 x JIC 6 x SAE 6 ½ $ 2.659-6803-8-8-8 JIC 8 x JIC 8 x SAE 8 ½ $ 5.009-6803-10-10-10 JIC 10 x JIC 10 x SAE 10 ¾ $ 6.009-6803-12-12-12 JIC 12 x JIC 12 x SAE 12 ¾ $ 9.009-6803-16-16-16 JIC 16 x JIC 16 x SAE 16 1 $11.00

ORFS M to SAE MConnector

9-FF6400-4-4 ORFS 4 x SAE 4 ¼ $ 1.559-FF6400-6-4 ORFS 6 x SAE 4 ¼ $ 1.809-FF6400-6-6 ORFS 6 x SAE 6 ¼ $ 1.809-FF6400-6-8 ORFS 6 x SAE 8 ¼ $ 2.009-FF6400-8-6 ORFS 8 x SAE 6 ¼ $ 2.309-FF6400-8-8 ORFS 8 x SAE 8 ¼ $ 2.309-FF6400-10-10 ORFS 10 x SAE 10 ¼ $ 2.859-FF6400-12-12 ORFS 12 x SAE 12 ½ $ 3.009-FF6400-16-16 ORFS 16 x SAE 16 ½ $ 5.00

ORFS M to SAE M90° Elbow

9-FF6801-4-4 ORFS 4 x SAE 4 ¼ $ 2.659-FF6801-6-4 ORFS 6 x SAE 4 ¼ $ 3.309-FF6801-6-6 ORFS 6 x SAE 6 ¼ $ 3.309-FF6801-6-8 ORFS 6 x SAE 8 ¼ $ 5.009-FF6801-8-6 ORFS 8 x SAE 6 ¼ $ 5.009-FF6801-8-8 ORFS 8 x SAE 8 ¼ $ 5.009-FF6801-10-10 ORFS 10 x SAE 10 ½ $ 7.009-FF6801-12-12 ORFS 12 x SAE 12 ½ $ 9.009-FF6801-16-16 ORFS 16 x SAE 16 ½ $11.95

Hosebarb toSAE M

300 PSI max.

9-4604-4-4 ¼˝ hose x SAE 4 ¼ $ 2.509-4604-6-6 ⅜˝ hose x SAE 6 ¼ $ 2.499-4604-8-8 ½˝ hose x SAE 8 ¼ $ 3.159-4604-10-10 ⅝˝ hose x SAE 10 ¼ $ 3.859-4604-12-8 ¾˝ hose x SAE 8 ¼ $ 4.999-4604-12-12 ¾˝ hose x SAE 12 ¼ $ 5.009-4604-16-12 1˝ hose x SAE 12 ¼ $ 7.899-4604-16-16 1˝ hose x SAE 16 ¼ $ 7.199-4604-20-16 1¼˝ hose x SAE 16 ½ $10.259-4604-20-20 1¼˝ hose x SAE 20 ½ $10.259-4604-24-20 1½˝ hose x SAE 20 ½ $18.509-4604-24-24 1½˝ hose x SAE 24 ½ $19.00

Hosebarb to SAE M90° Elbow

9-4601-4-4 ¼˝ hose x SAE 4 ¼ $ 2.809-4601-6-6 ⅜˝ hose x SAE 6 ¼ $ 3.259-4601-8-8 ½˝ hose x SAE 8 ½ $ 3.859-4601-12-12 ¾˝ hose x SAE 12 ¾ $ 5.009-4601-16-16 1˝ hose x SAE 16 ¾ $10.00

JIC F to JIC MReducer/Expander

9-2406-6-4 6F x 4M ¼ $ 1.359-2406-6-8 6F x 8M ¼ $ 2.859-2406-8-4 8F x 4M ¼ $ 2.359-2406-8-6 8F x 6M ¼ $ 1.809-2406-8-10 8F x 10M ¼ $ 2.609-2406-8-12 8F x 12M ½ $ 5.009-2406-10-6 10F x 6M ½ $ 2.309-2406-10-8 10F x 8M ½ $ 2.259-2406-10-12 10F x 12M ½ $ 2.409-2406-12-6 12F x 6M ½ $ 5.009-2406-12-8 12F x 8M ½ $ 2.959-2406-12-10 12F x 10M ½ $ 2.209-2406-12-16 12F x 16M ¾ $ 3.909-2406-16-8 16F x 8M ¾ $ 8.009-2406-16-10 16F x 10M ¾ $ 8.009-2406-16-12 16F x 12M ¾ $ 3.609-2406-20-16 20F x 16M ¾ $ 7.00



ITEM Size Shpg. Price ITEM Size Shpg. Price

JIC M to JIC MUnions

9-2403-4-4 4M x 4M ¼ $ .709-2403-6-4 6M x 4M ¼ $ 1.059-2403-6-6 6M x 6M ¼ $ 1.009-2403-8-6 8M x 6M ¼ $ 1.659-2403-8-8 8M x 8M ½ $ 1.409-2403-10-8 10M x 8M ½ $ 2.259-2403-10-10 10M x 10M ½ $ 2.259-2403-12-08 12M x 8M ½ $ 2.409-2403-12-10 12M x 10M ½ $ 2.859-2403-12-12 12M x 12M ¾ $ 2.759-2403-16-12 16M x 12M ¾ $ 2.809-2403-16-16 16M x 16M ¾ $ 2.659-2403-20-20 20M x 20M ¾ $ 5.00

JIC MUnion Tee

9-2603-4-4-4 4M x 4M x 4M ¼ $ 2.509-2603-6-6-6 6M x 6M x 6M ¼ $ 2.859-2603-8-8-8 8M x 8M x 8M ¼ $ 2.909-2603-10-10-10 10M x 10M x 10M ¼ $ 3.759-2603-12-12-12 12M x 12M x 12M ½ $ 6.009-2603-16-16-16 16M x 16M x 16M ½ $ 8.00

JIC M to JIC F90° Swivel Elbow

9-6500-4-4 4M x 4F ¼ $ 2.309-6500-6-6 6M x 6F ¼ $ 2.959-6500-8-8 8M x 8F ¼ $ 2.559-6500-10-10 10M x 10F ¼ $ 3.259-6500-12-12 12M x 12F ¼ $ 5.009-6500-16-16 16M x 16F ½ $ 8.00

JIC M to JIC M90° Elbow

9-2500-4-4 4M x 4M ¼ $ 1.859-2500-6-6 6M x 6M ¼ $ 2.259-2500-8-8 8M x 8M ¼ $ 2.209-2500-10-10 10M x 10M ¼ $ 2.509-2500-12-12 12M x 12M ¼ $ 3.609-2500-16-16 16M x 16M ½ $ 7.00

JIC Cap

9-304-C-4 JIC 4 ⅛ $ .559-304-C-6 JIC 6 ⅛ $ .659-304-C-8 JIC 8 ⅛ $ .859-304-C-10 JIC 10 ¼ $ 1.399-304-C-12 JIC 12 ¼ $ 1.809-304-C-16 JIC 16 ½ $ 2.90

Hex HeadJIC Plug

9-2408-4 JIC 4 ⅛ $ .759-2408-6 JIC 6 ⅛ $ .909-2408-8 JIC 8 ⅛ $ 1.209-2408-10 JIC 10 ⅛ $ 1.559-2408-12 JIC 12 ¼ $ 2.259-2408-16 JIC 16 ½ $ 2.50

ORFS F to JIC MSwivel

9-FF6504-4-4 ORFS 4 x JIC 4 ¼ $ 3.059-FF6504-6-6 ORFS 6 x JIC 6 ¼ $ 3.059-FF6504-8-8 ORFS 8 x JIC 8 ¼ $ 7.009-FF6504-10-10 ORFS 10 x JIC 10 ¼ $10.009-FF6504-12-12 ORFS 12 x JIC 12 ½ $13.95

ORFS M to ORFS F90° Swivel Elbow

9-FF6500-4-4 4M x 4F ¼ $ 3.159-FF6500-6-6 6M x 6F ¼ $ 3.809-FF6500-8-8 8M x 8F ¼ $ 5.009-FF6500-10-10 10M x 10F ¼ $ 6.009-FF6500-12-12 12M x 12F ½ $10.009-FF6500-16-16 16M x 16F ½ $12.95

ORFSCap

9-FF304-C-4 ORFS 4 ¼ $ 2.109-FF304-C-6 ORFS 6 ¼ $ 2.859-FF304-C-8 ORFS 8 ¼ $ 2.259-FF304-C-10 ORFS 10 ¼ $ 2.509-FF304-C-12 ORFS 12 ¼ $ 5.009-FF304-C-16 ORFS 16 ¼ $ 7.00

Hex HeadORFS Plug

9-FF2408-4 ORFS 4 ¼ $ 1.059-FF2408-6 ORFS 6 ¼ $ 1.359-FF2408-8 ORFS 8 ¼ $ 1.659-FF2408-10 ORFS 10 ¼ $ 2.259-FF2408-12 ORFS 12 ¼ $ 2.909-FF2408-16 ORFS 16 ¼ $ 2.55

Thread Identification Guide

NPT Fittings• Tapered threads,metal-to-metal seal

Fitting Thread Thread O.D. Size Size Male ⅛˝ NPT ⅛-27 13/32˝ ¼˝ NPT ¼-18 35/64˝ ⅜˝ NPT ⅜-18 43/64˝ ½˝ NPT ½-14 27/32˝ ¾˝ NPT ¾-14 11/16˝ 1˝ NPT 1-11½ 15/16˝ 1¼˝ NPT 1¼-11½ 143/64˝ 1½˝ NPT 1½-11½ 129/32˝ 2˝ NPT 2-11½ 2⅜˝

SAE Straight ThreadO-Ring Boss• Straight threads,seals on an O-ring

Fitting Nominal Thread Size Size Size SAE 4 ¼ 7/16-20 SAE 6 ⅜ 9/16-18 SAE 8 ½ ¾-16 SAE 10 ⅝ ⅞-14 SAE 12 ¾ 11/16-12 SAE 14 ⅞ 13/16-12 SAE 16 1 15/16-12 SAE 20 1¼ 1⅝-12 SAE 24 1½ 1⅞-12 SAE 32 2 2½-12

JIC 37° FlareFittings• Straight threads,seals on the cone-shaped face

Fitting Nominal Thread Size Size Size JIC 4 ¼ 7/16-20 JIC 6 ⅜ 9/16-18 JIC 8 ½ ¾-16 JIC 10 ⅝ ⅞-14 JIC 12 ¾ 11/16-12 JIC 14 ⅞ 13/16-12 JIC 16 1 15/16-12 JIC 20 1¼ 1⅝-12 JIC 24 1½ 1⅞-12 JIC 32 2 2½-12

O-Ring Face Seal(ORFS) Fittings• Straight threads, seals on O-ring in flatface of male fitting

Fitting Nominal Threads Size Size Size ORFS 4 ¼ 9/16-18 ORFS 6 ⅜ 11/16-16 ORFS 8 ½ 13/16-16 ORFS 10 ⅝ 1-14 ORFS 12 ¾ 13/16-12 ORFS 16 1 17/16-12

You can find weld-intank flanges on page 77

(-30) in.Hgto 400 PSIGaugeITEM 21-1637-CP$5.95• New top quality Winters 682603combi-nation pressure and vacuum gauge. “U”shaped bracket, 2 studs 2˝ C-C.SPECIFICATIONS• Measures • Clear bezel(-30) in.Hg to 400 PSI • Dry

• Graduated 10 PSI • ¼˝ NPT panel connection• Face diam. 2½˝ • Metal housing• Bezel diam. 2⅞˝ • Shpg. ½ lb.

88 Dry Pressure & Vacuum Gauges www.surpluscenter.com8

30˝ VacuumGauge

ITEM 21-1636-J$3.95• New top quality Winters 503545 Vacuumgauge. “U” shaped bracket, 2 studs 19/16˝C-C.SPECIFICATIONS • Bezel diam. 2¼˝• Measures • Clear bezel0 to (-30) in. Hg • Dry0 to (-762) mm Hg • Panel mount

• Graduated • ⅛˝ NPT connection0.5 in. Hg / 20 mm Hg • Metal housing

• Face diam. 2˝ • Shpg. ½ lb.

Vacuum &Press.Gauges

• The following dry gauges measure bothvacuum and the pressure indicated.

2˝ Diam. Shpg. ½ lb. ITEM PSI Case Connect Price

21-1636-R 30˝x400 Metal ¼ B $3.95

2½˝ Diam. Shpg. ½ lb. ITEM PSI Case Connect Price

21-1583-AG 30˝x240 Plastic ⅛ L $5.95 21-1637-BC 30˝x300 Metal ¼ B $5.95 21-1605-FB 30˝x400 Metal ¼ L $5.95 21-1605-FC 30˝x400 Metal ¼ L $5.95

3˝ Diam. Shpg. 1 lb. ITEM PSI Case Connect Price

21-1654 * 15˝x45 Metal ⅜ L $5.95

3½˝ Diam. Shpg. 1 lb. ITEM PSI Case Connect Price

21-1606-Z 30˝x30 Steel ¼ L $12.95 21-1606-D 30˝x300 Steel ¼ L $12.95 21-1606-AA 30˝x300 Steel ¼ L $12.95 21-1420 30˝x800 ¼ P $8.95

4˝ Diam. Shpg. 2 lbs. ITEM PSI Case Connect Price

21-1608-AC 30˝x30 Metal ¼ L $15.95 21-1607-CP 30˝x300 Metal ¼ L $15.95

4½˝ Diam. Shpg. 2 lbs. ITEM PSI Case Connect Price

21-1640-I 30˝x60 SS ¼ FP $18.95* connection is BSPP


on pages 146 - 147

Pressure &VacuumGauges

• Brand new. High quality. 2˝ dial, whiteface with black, easy to read graduationsand numerals. ¼˝ NPT fitting. Shpg. ½ lb.ITEM 2140-30 0 to 30 PSIITEM 2140-60 0 to 60 PSIITEM 2140-100 0 to 100 PSIITEM 2140-160 0 to 160 PSIITEM 2140-200 0 to 200 PSIITEM 2140-300 0 to 300 PSI

Specify Model Desired $5.05ITEM 2141 0 to 30 VAC $5.95

New Dry Pressure GaugesConnections indicated are

B = Back L = Lower LS = Left Side RS = Right SideP = Panel T = Top F = Flange FP = Flange Panel

Connections listed in inches NPT maleunless indicated.

Case: SS = Stainless Steel

1½˝ Diam. Dry Shpg. ½ lb. ITEM PSI Case Connect Price

21-1581-BH 760mm Vac Steel ⅛ B $3.95 21-1635-A 30 Plastic ⅛ LS $3.95 21-1563-B 30 Plastic ⅛ B $3.95 21-1635-G 30 Plastic ⅛ B $3.9521-1581-BC 30 Plastic ⅛ B $3.9521-1581-S 30 Plastic ⅛ B $3.9521-1635-M 30 Plastic ¼ B $3.9521-1718-A 30 Metal ⅛ B $3.9921-1718-B 60 Metal ⅛ L $3.99 21-1581-C 60 Plastic ⅛ L $3.95 21-1663-N 60 Steel ⅛ L $3.95 21-1635-E 60 Plastic ⅛ B $3.95 21-1635-N 60 Plastic ¼ B $3.95 21-1635-O * 60 Plastic ¼ B $3.95 21-1581-CA 60 Steel ¼ B $3.9521-1718-D 100 Metal ⅛ B $3.9921-1718-E 100 Metal ⅛ B $3.9921-1718-H 100 Metal ⅛ P $3.99 21-1395 100 Steel ¼ B $3.9921-1718-K 160 Metal ⅛ L $3.9921-1718-M 300 Metal ⅛ L $3.99 21-1663-O 1500 Steel ⅛ B $3.95* connection is BSPP

2˝ Diam. Dry Shpg. ½ lb. ITEM PSI Case Connect Price

21-1193-CA 14 Kg/cm2 Steel ⅛+¼ B $3.29 21-1636-A 30 Plastic ⅛ B $3.9521-1636-O 30 Metal ⅛ P $3.9521-1450 30 Steel ¼ B $4.99 21-1636-K 30 Plastic ¼ B $3.95 21-1467-I 30 Plastic ¼ B $3.99 21-1634-AZ 30 Plastic ¼ B $3.99 21-1418 30 Steel ¼ B $6.95 21-1582-AG 30 Metal ¼ T $4.95 21-1636-V 30 Plastic ¼ P $3.95 21-1636-B 60 Plastic ⅛ B $3.9521-1554-A 60 Plastic ⅛ B $3.9921-1719-B 60 Metal ⅛ B $4.9921-1719-L 60 Metal ⅛ B $4.9921-1636-I 60 Plastic ⅛ F $3.95 21-1715 60 Metal ¼ L $1.99 21-1633 60 Steel ¼ L $3.9521-1719-N 60 Metal ¼ L $4.99 21-1582-G 60 Plastic ¼ B $4.95 21-1467-J 60 Plastic ¼ B $3.99 21-1582-AA 60 Steel ¼ B $4.9521-1582-BU 60 Steel ¼ B $4.9521-1636-P 60 Plastic ¼ B $3.9521-1636-X 60 Plastic ¼ B $3.9521-1719-M 60 Metal ¼ B $4.99 21-1582-C 60 Steel ¼ P $4.95 21-1702 100 Steel ⅛ B $1.99 21-1569 100 Plastic ⅛ B $3.95 21-1467-C 100 Steel ⅛ L $4.9921-1719-C 100 Metal ¼ L $4.9921-1719-D 100 Metal ¼ L $4.9921-1719-E 100 Metal ¼ L $4.99 21-1582-H 100 Steel ¼ B $4.95 21-1634-BB 100 Steel ¼ P $3.99 21-1636-H 100 SS ¼ F $3.95 21-1582-AH 103 Steel ¼ B $4.9521-1582-AJ * 160 Plastic ⅛ B $4.9521-1719-O 160 Metal ⅛ B $4.99 21-1467-A 160 Plastic ¼ B $3.99 21-1636-L 160 Plastic ¼ T $3.95 21-1564-I 200 Steel ⅛ B $4.95 21-1475-A 200 Steel ⅛ B $1.9921-1723 200 Steel ⅛ P $1.99 21-1666 220 Steel ⅛ B $3.95 21-1636-M 300 Metal ¼ P $3.9521-1653-H 300 Steel ¼ P $3.9521-1560 400 Steel ¼ L $3.9521-1582-BF 600 Plastic ¼ L $4.9521-1719-Q 600 Metal ¼ L $4.9921-1582-CG 600 Steel ¼ B $4.9521-1719-H 1000 Metal ⅛ B $4.9921-1653-C 1500 Steel ¼ P $3.95 21-1510 3000 Steel ⅛ P $5.95 21-1392 3000 Plastic ¼ B $3.9921-1719-J 5000 Metal ⅛ B $4.9921-1719-I 5000 Metal ¼ B $4.99* connection is BSP

0 to 600 PSI /0 to 4000 KPAGauge

ITEM 21-1636-N$3.95• New top quality Winters 698002 Pressuregauge. “U” shaped bracket, 2 studs 1½˝ C-C.SPECIFICATIONS • Bezel diam. 2¼˝• Range 0 to 600 PSI • Bezel color clear0 to 4000 KPA • Dry gauge

• Graduations • Connection ¼˝ NPT panel20 PSI / 200 KPA • Metal housing

• Face diam. 2˝ • Shpg. ½ lb.

60 PSIGauge

ITEM 21-1716$1.99• New, SUPER PRO pressure gauge.White face with black numbers.SPECIFICATIONS• Range 0-60 • DryGraduations 1 PSI • Connection ¼˝ NPT back

• Face dia. 2˝ • Plastic case• Bezel dia. 2˝ • Shpg. ½ lb.

60 PSI PressureGauge

ITEM 21-1633$3.95SPECIFICATIONS • Face diam. 2¼˝• Range 0-60 PSI • Connection ¼˝ NPT lowerincrements of 2 lbs. • Steel housing

• Range 0-4 Bar • Dryincrements of 0.1 • Shpg. ½ lb.

800-488-3407 Dry Pressure & Vacuum Gauges 89&

2½˝ Diam. Flange Shpg. ½ lb. ITEM PSI Case Connect Price

21-1565-EEE 100 SCB ¼˝ $5.95 21-1565-H 200 SCB ¼˝ $5.95 21-1565-I 600 SCB ¼˝ $5.95 21-1565-Z 1500 SCB ¼˝ $5.95 21-1565-GG 6000 SCB ¼˝ $5.95

2½˝ Diam. Panel Shpg. ½ lb. ITEM PSI Case Connect Price

21-1583-BR 30˝ Vac Steel ¼ $5.9521-1583-CI 103 Steel ¼ $5.9521-1583-AE 200 Steel ⅛ $5.95

3½˝ Diam. Dry Shpg. 2 lbs. ITEM PSI Case Connect Price

21-1437 30 ¼ FP $7.99 21-1472 6000 ¼ FP $15.99

4˝ Diam. Dry Shpg. 3 lbs. ITEM PSI Case Connect Price

21-1607-BD 400 Metal ¼ B $15.9521-1607-ED 2000 Metal ½ P $15.9521-1607-CR 20000 Metal ½ L $15.95

4½˝ Diam. Dry Shpg. 3 lbs. ITEM PSI Case Connect Price

21-1608-DK 15 Metal ¼ L $18.9521-1608-DH 60 Metal ¼ B $18.95 21-1640-H 60 SS ¼ FP $18.9521-1608-EE 100 Plastic ½ FP $18.9521-1608-FT 160 Plastic ¼ FP $18.95 21-1608-BW 500 Metal ¼ L $18.95 21-1634-AS 800 SS ¼ L $15.9521-1608-DC 1000 Metal ¼ L $18.95 21-1463-A 1000 SS ¼ L $21.95 21-1463-B 1000 SS ¼ B $19.9521-1608-DG 3000 Metal ¼ L $18.95 21-1463-C 3000 SS ¼ L $22.95 21-1463-D 3000 SS ¼ B $21.50 21-1463-E 5000 SS ¼ L $24.95 21-1463-F 5000 SS ¼ B $22.50

6˝ Diam. Dry Shpg. 4 lbs. ITEM PSI Case Connect Price

21-1474 3000 ??? ¼ B $19.99

2½˝ Diam. Dry Shpg. ½ lb. ITEM PSI Case Connect Price

21-1720-A 15 Metal ¼ L $5.99 21-1565-P 30 Steel ⅛ B $5.9521-1720-P 30 Metal ¼ B $5.9921-1583-CH 30 Plastic ¼ B $5.95 21-1583-CO 30 Steel ¼ P $5.95 21-1511 30 Steel ¼ P $5.95 21-1583-CD 30 Metal ¼ L $5.9521-1720-C 60 Metal ¼ L $5.9921-1720-D 60 Metal ¼ B $5.99 21-1583-DR 100 Steel ⅛ P $5.95 21-1583-AY 100 Steel ⅛ P $5.9521-1720-E 100 Metal ¼ B $5.9921-1605-EW 100 Metal ¼ B $5.95 21-1583-CG 100 Plastic ¼ B $5.95 21-1637-A 200 Plastic ¼ L $5.95 21-1709-E 300 Steel ¼ L $5.95 21-1605-FV 300 Metal ⅛ L $5.9521-1657-H 300 Steel ¼ L $5.95 21-1605-AH 300 Metal ¼ L $5.95 21-1583-Z 300 Steel ¼ B $5.9521-1657-G 300 Steel ¼ B $5.95 21-1605-BF 300 Metal ¼ B $5.95 21-1637-J 300 Metal ¼ B $5.9521-1720-I 300 Metal ¼ F $5.99 21-1583-DD 400 Plastic ⅛ L $5.95 21-1605-AX 400 Metal ¼ L $5.9521-1565-GGG 400 Steel ¼ L $5.9521-1653-G 400 Steel ¼ L $5.9521-1583-DQ 400 Steel ¼ B $5.95 21-1583-AF 500 Plastic ⅛ L $5.9521-1583-B 500 Plastic ¼ L $5.95 21-1637-B 600 Plastic ¼ L $5.95 21-1530 600 SS ¼ L $7.95 21-1565-HHH 600 Steel ¼ L $5.95 21-1605-BE 600 Metal ¼ L $5.9521-1583-DC 600 Plastic ¼ L $5.9521-1709-F 600 Steel ¼ L $5.9521-1583-CY 600 Plastic ¼ B $5.9521-1653-E 600 Steel ¼ P $5.95 21-1637-I 600 Metal ¼ P $5.95 21-1634-AR 800 SS ¼ L $5.95 21-1657-B 1000 Plastic ¼ L $5.95 21-1653-A 1000 Plastic ¼ B $5.95 21-1565-J 1000 Steel ¼ B $5.9521-1194-QQ 1000 Plastic ¼ B $2.9921-1663-J 1000 Steel ¼ B $5.95 21-1605-AJ 1015 Metal ¼ L $5.9521-1605-DR 1150 Metal ¼ L $5.9521-1663-K 1500 Steel ¼ L $5.9521-1605-EV 1500 Metal ¼ L $5.95 21-1149-B 1500 Plastic ¼ L $5.95 21-1565-III 1500 Steel ¼ L $5.95 21-1709-H 1500 Steel ¼ L $5.95 21-1605-AD 1500 Steel ¼ L $5.95 21-1565-RR 1500 SS ¼ B $5.95 21-1374 1500 Plastic ¼ B $3.99 21-1380 2000 Plastic ¼ B $3.99 21-1634-AW 2000 SS ¼ B $5.95 21-1634-AV 2000 SS ¼ B $5.9521-1565-AA 2000 Steel ¼ B $5.9521-1605-DA 2000 Steel ¼ L $5.95904-4 2000 Plastic ¼ L $8.9521-1605-AM 2250 Metal ¼ B $5.9521-1720-K 3000 Metal ¼ B $5.9921-1720-L 3000 Metal ¼ P $5.9921-1720-M 5000 Metal ¼ P $5.99

30 PSIGauge

ITEM 21-1430$4.95• New. Top quality dry pressure gauge.SPECIFICATIONS• 30 PSI • ¼˝ NPT lower connection• 2½˝ dia. face • Dry type• Steel case • Shpg. ½ lb.

30 PSI PMGauge

ITEM 21-1634-BA$3.99• New top quality TEL-TRU 2050BC 4B1 -C6FV dry pressure gauge. “U” shapedbracket, 2 studs 1⅜˝ C-C.SPECIFICATIONS• Measures 0-30 PSI / 0-2 Bar• Dry• Graduated 0.5 PSI / 0.05 Bar • Panel mount• Face diam. 2˝ • ¼˝ NPT connection• Bezel diam. 2¼˝ • Steel housing• Stainless steel bezel • Shpg. ½ lb.

0 to 1000 PSIGauge

ITEM 21-1709-G$5.95• New, OCI INSTURMENTS Model 2034L1000 gauge. Painted steel case, brass in-ternals.SPECIFICATIONS• Range 0 to 1000 PSI • Bezel color black• Graduations 20 PSI • Dry gauge• Face diam. 2½˝ • Connection ¼˝ NPT lower• Bezel diam. 2½˝ • Shpg. ½ lb.

New Dry Pressure GaugesConnections indicated are

B = Back L = LowerLS = Left Side RS = Right SideP = Panel T = TopF = Flange FP = Flange Panel



200 PSI PMDryGauge

ITEM 21-1475$1.99• New. Top quality dry pressure gauge.SPECIFICATIONS• 200 PSI • ⅛˝ NPT female• 2˝ dia. face back connection• Steel case • Dry type• Panel mount • Shpg. ½ lb.

90 Liquid Filled & Compressed Refrigerant Gauges www.surpluscenter.com8

Glycerin FilledPressureGauges

$16.95 ea.• Brand new. Glycerin dampens vibrations,protects against surge pressure. Chrome.¼˝ NPT. Size 2½˝ diam. Shpg. 1 lb.ITEM 21-1246-A 30 PSIITEM 21-1246-B 60 PSIITEM 21-1246-C 100 PSIITEM 21-1246-D 200 PSIITEM 21-1246-E 300 PSIITEM 21-1246-F 400 PSIITEM 21-1246-G 600 PSIITEM 21-1246-H 1000 PSIITEM 21-1246-I 1500 PSIITEM 21-1246-J 2000 PSIITEM 21-1044 3000 PSIITEM 21-1045 5000 PSI

Liquid Filled GaugesConnections indicated areB = BackL = LowerS = SideP = Panel



1½˝ Diam. Shpg. ½ lb. ITEM PSI Case Connect Price

21-1667 200 SS ⅛ B $1.99 21-1700 300 SS ¼ B $5.95

2˝ Diam. Shpg. ½ lb. ITEM PSI Case Connect Price

21-1722 300 SS ⅛ S $4.99

2½˝ Diam. Shpg. 1 lb. ITEM PSI Case Connect Price

21-1500 30˝x300 Plastic ⅛ L $11.99 21-1393 250Kg/cm2 Plastic ¼ L $ 8.95 21-1637-CC 30 Metal ¼ L $12.95 21-1652-A ** 100 Steel SAE 4 B $12.95 21-1637-W 600 SS JIC 4 L $12.95 21-1652-D * 600 Steel ¼ L $12.95 21-1352-B 1500 Plastic ¼ B $ 9.99 21-1528 1500 SS ¼ L $11.95 21-1349 1500 SS ¼ L $16.95 21-1199-DD 1500 SS ¼ L $18.99 21-1637-AB 1500 SS JIC 4 L $12.95 21-1637-Y 2000 SS JIC 4 L $12.95 21-1557 2000 Plastic ¼ L $12.95 21-1572-LL 2000 Plastic ¼ L $11.95 21-1572-MM 2000 Plastic ¼ L $11.95 21-1652-C * 16 BAR Steel ¼ L $12.95* connection is BSPP ** bulkhead type

2½˝ Diam. Panel Shpg. ½ lb. ITEM PSI Case Connect Price

21-1720-S 800 SS ¼˝ P $12.95 21-1572-X 1500 Plastic ¼˝ P $11.95

Compressed Refrigerant Gauges• New pressure gauges calibrated to display the temperature and corresponding pres-sure of compressed refrigerants or Ammonia. All have white faces. Panel mount gaugesinclude a mounting bracket. All are dry gauges. Shpg. ½ lb.Case: M = Metal P = Plastic B = Brass S = Steel SS = Stainless Steel Connection indicated L = Lower P = Panel

ITEM Diam. PSI Vac. Compatible Refrigerants & Their Ranges Connect Case Price 21-1583-EL 2˝ 500 30˝ R502: -40 F to 167 F, R22: -40 F to 173 F, R12: -40 F to 218 F JIC 4 L S $5.95 21-1583-BE 2˝ 500 — R502: -40 F to 167 F, R22: -40 F to 173 F, R12: -20 F to 218 F ¼˝ L S $5.95 21-1583-EM 2½˝ 150 30˝ R502: -100 F to 75 F, R22: -100 F to 82 F, R12: -100 F to 116 F JIC 4 L S $3.95 21-1583-AL 2½˝ 240 30˝ R502: -80 to 61 F, R22: -80 to 69 F, R12: -70 to 101 F ⅛˝ L P $5.95 21-1583-AA 2½˝ 240 30˝ R502: -80 to 61 F, R22: -80 to 69 F, R12: -70 to 101 F ⅛˝ L M $5.95 21-1583-AH 2½˝ 500 R502: -40 to 167 F, R22: -40 to 173 F, R12: -20 to 218 F ⅛˝ L P $5.95 21-1583-AP 2½˝ 500 R502: -40 to 167 F, R22: -40 to 173 F, R12: -20 to 218 F ⅛˝ L S $5.95 21-1637-CF 2½˝ 500 30˝ R410A: -40 to 90 F, R12: 0 to 160 F, R134a: 0 to 150 F, R22: -30 to 120 F ⅛˝ P M $5.95 21-1637-CG 2½˝ 500 30˝ R410A: -40 to 90 F, R12: 0 to 160 F, R134a: 0 to 150 F, R22: -30 to 120 F ⅛˝ L P $5.95 21-1637-CH 2½˝ 800 — R410A: 20 to 150 F, R12: 70 to 200 F, R134a: 60 to 190 F, R22: 30 to 160 F ⅛˝ L P $5.95 21-1637-CI 2½˝ 5.5 MPa — R410A: -10 to 70 C, R12: 20 to 100 C, R134a: 20 to 90 C, R22: 0 to 70 C ⅛˝ P M $5.95 21-1637-CJ 2½˝ 5.5 MPa — R410A: -10 to 70 C, R12: 20 to 100 C, R134a: 20 to 90 C, R22: 0 to 70 C ⅛˝ L P $5.95 21-1637-CK 2½˝ 3.4 MPa -0.1 MPa R410A: -40 to 30 C, R12: -5 to 70 C, R134a: 0 to 65 C, R22: -20 to 45 C ⅛˝ P M $5.95 21-1637-CL 2½˝ 3.4 MPa -0.1 MPa R410A: -40 to 30 C, R12: -5 to 70 C, R134a: 0 to 65 C, R22: -20 to 45 C ⅛˝ L P $5.95

AmmoniaGauges

• New pressure andvacuum gauges de-signed specifically tohandle ammonia.

ITEM 21-1607-CS $15.95• Compatible refrigerant and range:

Ammonia -80°F to +126°FSPECIFICATIONS• Range • Dry gauge0-300 PSI / 0-(-30) in.Hg • Mounting lower

• Grad. 5 PSI / 5 in.Hg • Connection ¼˝ NPT• Face diam. 4˝ • Metal housing• Chrome bezel diam. 4½˝ • Shpg 2 lbs.

ITEM 21-1649-C $20.95• Compatible refrigerant and range:

Ammonia -40° to 0° to 125° FSPECIFICATIONS• Range • Liquid filled gauge0-300 PSI / 0-(-30) in.Hg • Mounting lower

• Grad. 5 PSI / 5 in.Hg • Connection ½˝ NPT• Face diam. 4˝ • Stainless Steel housing• Chrome bezel diam. 47/16˝ • Shpg 1½ lbs.

BAR Dry GaugesConnections indicated areB = BackL = Lower



2˝ Diam. Shpg. ½ lb. ITEM BAR Case Connect Price

21-1582-BB 2.5 Plastic ¼ B $4.95 21-1653-R 6 Plastic ¼ B $3.95 21-1653-S 10 Plastic ¼ B $3.95 21-1582-BG 10 Plastic ¼ B $4.95

2½˝ Diam. Shpg. 1 lb. ITEM BAR Case Connect Price

21-1657-N 6 Plastic ¼ L $5.95 21-1657-O 10 Plastic ¼ L $5.95 21-1583-AW 22 Metal ¼ L $5.95

4˝ Diam. Shpg. 3 lbs. ITEM BAR Case Connect Price

21-1634-AG 6 SS ½ L $12.95 21-1634-AL 40 SS ½ L $12.95

6˝ Diam. Shpg. 3 lbs. ITEM BAR Case Connect Price

21-1634-AM 25 SS ½ L $19.95 21-1634-AO 100 SS ½ L $19.95

Humphrey Air Cylinders

• New, HUMPHREY. Double acting multi-mount style air cylinders. Aluminum con-struction, 100 PSI, 10-32 ports.

ITEM Bore Stroke R. Lgth. Shpg. Price

4-10618 ¼˝ ½˝ 2.193˝ ½ lb. $5.954-10613 ¼˝ ¾˝ 2.443˝ ½ lb. $5.954-10624 ⅜˝ ½˝ 2.39˝ ¾ lb. $5.954-10631 ⅜˝ ¾˝ 2.64˝ ½ lb. $5.954-10635 ⅜˝ 1˝ 2.89˝ ½ lb. $5.954-10646 ⅝˝ ½˝ 2.587˝ ¾ lb. $6.954-10637 ⅝˝ ¾˝ 2.837˝ 1 lb. $7.994-10642 ⅝˝ 1˝ 3.087˝ ¾ lb. $8.95

3˝ Bore, 4˝ Stroke

ITEM 4-1811 $69.99• New, aluminum body, steel rod doubleacting air cylinder. Wrench flats on shaft.SPECIFICATIONS • Ports ¼˝ NPT• Double acting • Retracted lgth. 9⅞˝• Bore 3˝ • Rod end ¾˝-10 threaded• Stroke 4˝ • Mount four 5/16˝-24 tapped• Rod dia. ¾˝ holes on 1¼˝ x 1¼˝ ctrs.• Pressure 250 PSI max. • Shpg. 5 lbs.

¾˝ Bore, 13¾˝ Stroke

ITEM 4-1112 $27.95SPECIFICATIONS • Rod diam. ¼˝• Double acting • Ports ⅛˝ NPT• Bore/stroke ¾˝ x 13¾˝ • ⅝˝ threaded front mount• 250 PSI • Shpg. 1½ lbs.

¾˝ Bore, 3¼˝ Stroke

ITEM 4-1486-A $5.99• Includes rod collar and 9/16˝ diam. steelplunger cap or valve seater.SPECIFICATIONS • Ports ⅛˝ NPT• New, double acting • Retracted lgth. 7¾˝• Bore/stroke ¾˝ x 3¼˝ • ⅜˝ NPTM threaded• Max. 250 PSI nose mount• Rod diam. ¼˝ • Shpg. 1 lb.

1¼˝ Bore,¾˝ Stroke

ITEM 4-1847$10.95• New, Lin-Act Shor-T Model ST-1.25X.75-4-S/R-MOD. Very compact design.SPECIFICATIONS• Double Acting • Ports ⅛˝ NPT• Bore 1.25˝ • Retracted lgth. 2.545˝• Stroke 0.75˝ • Mount four• Rod dia. 0.5˝ 10-32 holes in each end• Rod width 5/16-24 • Body size 1.95˝ O.D. x 2.41˝• Pressure 250 PSI max. • Shpg. 1 lb.

7/16˝ x 1˝ Double Ended

ITEM 4-1705 $5.95• New, BIMBA. Nose mount each end. Springloaded to one end, only moves to one side.SPECIFICATIONS • Rod diam. 3/16˝ w/10-32• Double acting UNF threaded endsw/spring return • Mtg. threads ⅜˝-24

• Bore/stroke 7/16˝ x 1˝ • Mtg. distance 4¼˝• 250 PSI • Overall length 8¼˝• Ports 10-32 • Shpg. ½ lb.

800-488-3407 Air Cylinders 91&

Double Air Cylinder

ITEM 4-1419 $18.99• New, BIMBA. Two independently con-trolled, double-acting cylinders connectedin the middle. Could give two step motion(3˝ then 7˝ extension). Unique product forautomation. Four ports, two in the middleof the cylinder, one in each end. Both endsof cylinder body are threaded ⅝˝-18 RH x⅜˝ long. Rod ends are threaded 5/16˝-24 RHx ½˝ long. Retracted length 14⅞˝ from rodend to rod end.SPECIFICATIONS• Double acting, double cyl. • Pressure 250 PSI max.• Bores 11/16˝ • Ports ⅛˝ NPT• Strokes 3˝ and 4˝ • Mount threaded ends• Rods dia. 5/16˝ • Shpg. 2 lbs.

Single Acting 7/16˝ Bore, 3½˝ Stroke

ITEM 4-1766 $7.99• New, BIMBA. Stainless steel construc-tion, 250 PSI working pressure.SPECIFICATIONS • Max. 250 PSI• Double acting • Ports 10-32• Bore/stroke 7/16˝ x 3½˝ • Retracted lgth. 513/16˝• Rod 3/16˝ diam. • Nose mnt. 7/16˝-20 threadx ½˝ w/10-32 thread • Shpg. ½ lb.

9/16˝ Bore, 2˝ Stroke

ITEM 4-1726 $5.95• Used BIMBA Model 022 air cylinder.Single acting push, spring return. Includesa right angle compression fitting for ⅛˝O.D. tubing.SPECIFICATIONS • Port 10-32• Single acting push type • Retracted lgth. 5¼˝• Bore 9/16˝/stroke 2˝ • Nose mount 7/16˝• 250 PSI max. • Rod threaded 10-32• Rod diam. 3/16˝ • Shpg. ¼ lb.

9/16˝ Bore, 2˝ Stroke

ITEM 4-1740 $4.95• New, BIMBA single acting spring returnnose mount air cylinder.SPECIFICATIONS• Single acting • Port 10-32• Bore/stroke 9/16˝ x 2˝ • Retracted lgth. 4⅜˝• 250 PSI max. • Nose mnt. 7/16˝-20 threaded• Rod diam. 3/16˝ • Shpg. ½ lb.

¾˝ Bore Air Cylinders• Used BIMBA stainless steel. Extend portin base, retract port in rod end.SPECIFICATIONS• Double acting • Threaded rod end• Bore ¾˝ ¼˝-28 x ½˝ long• PSI max. 250 • Nose mount threaded ⅝˝-18• Rod diam. ¼˝ • Flat base 0.81˝ O.D.• Ports ⅛˝ NPT • Shpg. 1 lb.

ITEM 4-1761-A $4.95• P/N 53E743. Stroke ¾˝, retracted lgth. 5˝(rod end to base end).

ITEM 4-1761-B $4.95• P/N 53E712. Stroke 15/16˝, retracted lgth.5⅜˝ (rod end to base end).

12 mm Bore, 2¾˝ Stroke

ITEM 4-1630 $5.95• New, FESTO Model DO-12-74-PP-SA aircylinder. Stainless steel tubing with alu-minum end-caps. 10-32 ports withadapters to 1/16˝ hosebarbs. Rod endthreaded 4 mm, 0.70˝ pitch. Base end-captapped 4 mm, 0.70˝ pitch. Cushions atboth ends of stroke.SPECIFICATIONS • Press. 8 Bar (116 PSI) max• Double acting • Ports 1/16˝ hosebarbs• Bore 12 mm (0.472˝) • Retracted lgth.• Stroke 2¾˝ 6¾˝ end-to-end• Rod dia. 4 mm (0.156˝) • Shpg. 1 lb.1½˝ Bore, ¾˝ Stroke

ITEM 4-1762-B $3.95• Used BIMBA stainless steel. Pressurizeto retract, spring extend.SPECIFICATIONS • Retracted lgth. 6¼˝• P/N 53E732 (rod end to base end)• Bore/stroke 1½˝ x ¾˝ • Threaded rod end• PSI max. 250 7/16˝-20 x ¾˝ long• Rod diam. 7/16˝ • Nose mount threaded ¾˝-16• Port ⅛˝ NPT • Flat base 1.56˝ O.D.• Single acting, spring extend • Shpg. 1½ lbs.

2˝ Bore, 1˝ Stroke

ITEM 4-1829 $16.95• New, BIMBA single acting air cylinder.Spring return to retract position.SPECIFICATIONS• Single Acting • Ports 90° connector• Bore 2˝ for ¼˝ OD hose• Stroke 1˝ • Retracted lgth. 7⅛˝• Rod dia. ⅝˝ (pin center to end of rod)• Rod thread ½-20 • Mount 1.25-12 thread• Pressure 250 PSI max. at each end,• Shpg. 2 lbs. ⅜˝ pin hole on base

20.35 CFM, Two StageAir Compressor

ITEM 4-1751$442.95• Brand new ROL-AIR Model K28. Two-stage compressor with aluminum crank -case for light weight and good heatdissipation. Cast iron cylinders for long lifeand greater wear resistance. Crankshaftsupported on roller bearings with replace-able bearings for connector rods. Reedvalves. Deep fins for cooling on outputlines and intercooler. Includes oil sightgauge and automotive style air filter.SPECIFICATIONS • Flywheel 15.16˝ dia.• Two stage, two cylinder • Bore/Stroke• Flow 20.35 CFM max. 1st stage 3.74˝/2.56˝• Pressure 175 PSI max. 2nd stage 1.97˝/2.56˝• Power reqd. 5 HP max. • Oil capacity 2 qt.• Speed 1250 RPM max. • Mnt. base 6.41˝ x 8.09˝ ctrs.• Rotation CCW • Size 16⅜˝ x 12¼˝ x 16⅝˝• Port 3/4˝ NPT • Shpg. 75 lbs.

12.9 CFM, Single StageCompressor

ITEM 4-1832$195.95• Brand new, FINI Model MK103. Singlecylinder, single stage belt drive compres-sor. Aluminum head and crankcase. Inte-gral cold start valve allows no load starting.Oil sight gauge.SPECIFICATIONS• One stage, one cylinder • Rotation CCW• Pressure 145 PSI max. • Flywheel 10˝ dia.• Flow at 1370 RPM (3 HP) single ½˝ groove12.9 CFM open flow • Port ½˝ NPT8 CFM at 145 PSI • Oil capacity ½ qt.

• Flow at 1060 RPM (1½ HP) • Mount 6¼˝ x 4¾˝9.9 CFM open flow • Size 10˝ x 10˝ x 11˝7.2 CFM at 145 PSI • Shpg. 27 lbs.

92 Air Compressors www.surpluscenter.com8

Heavy Duty Two Stage AirCompressors

• Brand new. Heavy duty two stage, castiron compressors designed for heavy dutyapplications where high air volume andpressure are required along with extra longlife. All cast iron including inner and aftercoolers to reduce air temperature. Lowspeed gives quieter operation, less vibra-tion. Complete with oil sight glass, un-loader valve and safety pop off valve.

23 CFM,Two Cylinder

ITEM 4-1066$539.99•SPECIFICATIONS• Displ. 23 CFM • 175 PSI max. • 17 CFM at 175 PSI • 805 RPM max. • 2 cylinder • 5 HP • 17˝ pulley 2 groove B belt • Mtg. pattern 8˝ x 9˝• Bore/stroke • Cooling fan/pulley4⅛˝ x 3½˝ 1st stage • Size 17˝ x 19˝ x 21˝2⅛˝ x 3½˝ 2nd stage • Shpg. 250 lbs.

Truck freight only.

46 CFM,Four Cylinder

ITEM 4-1070$999.99SPECIFICATIONS• Displ. 46 CFM • Mtg. pattern 9¼˝ x 9½˝• 175 PSI max. • 4 cylinder• 35 CFM at 175 PSI • 10 HP• 805 RPM max. • 19˝ pulley 2 groove B belt• Bore/stroke • Cooling fan/pulley4⅛˝ x 3½˝ 1st stage • Size 20˝ x 29˝ x 28˝2⅛˝ x 3½˝ 2nd stage • Shpg. 315 lbs.

Truck freight only.

7.5 CFM, Single StageAir CompressorPump

ITEM 4-1511$129.99• New. Top quality air compressor. Ideal re -place ment for port able compressors.Finned aluminum head and body dissi-pates heat. Has intake air filters and pul-leys with cooling fans for CCW rotation.SPECIFICATIONS • 2½ HP for full output• Model MK11 • 10˝ single A groove pulley• 7.5 CFM displ. • Bore/stroke 2.755˝ x 2.175˝• PSI 125 cont. • Outlet port ½˝ NPT• PSI 140 peak • Foot mtg. 8˝ x 4½˝• 4.6 CFM at 100 PSI c/c bolt pattern• RPM 1000 • Size 14½˝ x 10¾˝ x 10˝• One cylinder • Shpg. 25 lbs.

Rol-Air Single StageAir Compressors

• Brand new ROL-AIR. Single stage com-pressors, ideal replacement on portablecompressors. Aluminum head andcrankcase give good heat dissipation whilecast iron cylinder sleeves provide long life.3.09 CFM, One CylinderITEM 4-1470$194.95SPECIFICATIONS• Model K3• Flow 3.09 CFM max.• Pressure 140 PSI max.• Power reqd. 3/4 HP max.• Speed 1000 RPM max.• Rotation CCW• Flywheel 10.24˝ dia.• Port ½˝ NPT • Mnt. base 3.74˝ x 4.53˝ ctrs.• Bore/Stroke 2.08˝/1.57˝ • Size 10¼˝ x 9⅞˝ x 12½˝• Oil capacity 6 oz. • Shpg. 17 lbs.13.42 CFM, Two Cylinder

ITEM 4-1410$299.95SPECIFICATIONS• Model K17• Flow 13.42 CFM max.• Pressure 150 PSI max.• Power reqd. 3 HP max.• Speed 1100 RPM max.• Rotation CCW• Flywheel 11.5˝ dia.• Port ½˝ NPT• Bore/Stroke 2.61˝ x 2/1.97˝

• Oil capacity 36 oz. • Size 11½˝ x 10¼˝ x 13¾˝• Mount base 5.19 ̋x 7.08 ̋ctrs. • Shpg. 40 lbs.30.16 CFM, Two Cylinder

ITEM 4-1473 $577.95SPECIFICATIONS • Flywheel 15.16˝ dia.• Model K35 • Port ¾˝ NPT• Flow 30.16 CFM max. • Bore/Stroke 3.54˝ x 2/3.31˝• Pressure 140 PSI max. • Oil capacity 48 oz.• Power reqd. 5 HP max. • Mnt. base 7.48˝ x 8.97˝ ctrs.• Speed 800 RPM max. • Size 153/16˝ x 143/16˝ x 18½˝• Rotation CCW • Shpg. 86 lbs.

Rol-Air Two Stage AirCompressors

4-12874-1288

4-1411• Brand new ROL-AIR. Two-stage compres-sors with aluminum crankcase for lightweight and good heat dissipation. Cast ironcylinders for long life and greater wear resist-ance. Crankshaft supported on roller bear-ings with replaceable bearings for connectorrods. Reed valves. Deep fins for cooling onoutput lines and intercooler. Includes oil sightgauge and automotive style air filter.18.25 CFM, Two CylinderITEM 4-1287 $448.95SPECIFICATIONS • Flywheel 15.16˝ dia.• Model K24 • Bore/Stroke• Flow 18.25 CFM max. 1st stage 3.54˝/2.56˝• Pressure 175 PSI max. 2nd stage 1.97˝/2.56˝• Power reqd. 5 HP max. • Oil capacity 2 qt.• Speed 1250 RPM max. • Mnt. base 6.41˝ x 8.09˝ ctrs.• Rotation CCW • Size 153/16˝ x 12¼˝ x 16⅜˝• Port ½˝ NPT • Shpg. 64 lbs.30.78 CFM, Two CylinderITEM 4-1288 $598.95SPECIFICATIONS • Flywheel 15.16˝ dia.• Model K30 • Bore/Stroke• Flow 30.78 CFM max. 1st stage 4.13˝/3.31˝• Pressure 175 PSI max. 2nd stage 2.05˝/3.31˝• Power reqd. 7.5 HP max. • Oil capacity 2 qt.• Speed 1200 RPM max. • Mnt. base 7.48˝ x 8.97˝ ctrs.• Rotation CCW • Size 16⅜˝ x 143/16˝ x 22¼˝• Port ¾˝ NPT • Shpg. 95 lbs.54.58 CFM, Four Cylinder

ITEM 4-1411 $1498.95SPECIFICATIONS • Flywheel 21.65˝ dia.• Model K60 • Bore/Stroke• Flow 54.58 CFM max. 1st stage 4.13˝ x 2/3.31˝• Pressure 175 PSI max. 2nd stage 2.05˝ x 2/3.31˝• Power reqd. 15 HP max. • Oil capacity 3 qt.• Speed 1100 RPM max. • Mnt. base 9.60 ̋x 11.73 ̋ctrs.• Rotation CCW • Size 2815/16˝ x 17½˝ x 23⅝˝• Ports 1˝ NPT • Shpg. 255 lbs.

Truck freight only.

Mobile AirTanks

• Brand new. Steel tank with black pow-der-coated exterior and rust preventativesprayed inside. D.O.T. approved. Roundbody with mounting brackets on both endsfor easy installation. One ⅜˝ NPT port ineach end, under the mounting bracket.6.31 Gallon

ITEM 4-1754 $39.95SPECIFICATIONS • 150 PSI max.• Capacity 1490 cu. in. • Four bolt mount on• Two ⅜˝ NPT ports 2¼˝ x 27½˝ ctrs.One ¾˝ NPT port • Size 9⅝˝ O.D. x 29˝ longOne ¼˝ NPT port • Shpg. 25 lbs.12.14 Gallon

ITEM 4-1755 $59.95SPECIFICATIONS • 150 PSI max.• Capacity 2865 cu. in. • Four bolt mount on• Two ⅜˝ NPT ports 2¼˝ x 29½˝ ctrs.One ¾˝ NPT port • Size 12¼˝ O.D. x 31˝ longOne ¼˝ NPT port • Shpg. 40 lbs.

Adjustable ReliefValve

ITEM 432 $11.95• Brand new. Install on compressed airstorage tanks to provide necessary protec-tion against excessive pressure build-up.Stainless steel ball. Factory set 100 PSI.Adjustable 50-200 PSI. ¼˝ NPT. Size ¾˝ x2⅜˝. Shpg. ½ lb.

800-488-3407 Air Compressors, Tanks & Accessories 93&

115 VAC VacuumPump/

Compressor

ITEM 4-1817$34.99

• New, KNF Neuberger Model N86-9.07compact diaphragm vacuum pump/com-pressor. Teflon coated diaphragm and Vitonvalves. Shaded pole motor w/cooling fan.SPECIFICATIONS • Vacuum 160 mbar max.• Voltage 115 AC • Ports ⅛˝ NPT• Amperage 0.65 Amps • Duty continuous• Air 5.5 LPM open flow • Size 4˝ x 2½˝ x 3½˝• Pressure 36 PSI max. • Shpg. 4 lbs.

115/230 WheelbarrowCompressors

• New, WORLDAIRE wheelbarrow com-pressor. Cast iron cylinder section with alu-minum heads. Complete with pressureregulator, two tanks, air filters, two ¼˝ quickcoupler hose connections, pressure gauges,and pressure switch. Integral oil sight gauge.Manual reset thermal protection. Automaticcompressor shut-off at 125 PSI.

2 HPITEM 4-1792 $279.99SPECIFICATIONS • Pressure 125 PSI max• Model C0210ELEC • Speed 1150 RPM• Voltage 115/230 AC • Ports two ¼ ̋quick-connects• Amperage 15/7.5 Amps • Cylinders 2• Power 2 HP • Stages 1• Flow • Air capacity 10.6 gallons7.2 CFM at 40 PSI • Size 40˝ x 24˝ x 33˝6.5 CFM at 90 PSI • Shpg. 240 lbs.

Truck freight only.

3 HPITEM 4-1793 $299.99SPECIFICATIONS • Pressure 125 PSI max• Model C0310ELEC • Speed 1180 RPM• Voltage 115/230 AC • Ports two ¼ ̋quick-connects• Amperage 24/12 Amps • Cylinders 2• Power 3 HP • Stages 1• Flow • Air capacity 10.6 gallons10 CFM at 40 PSI • Size 40˝ x 24˝ x 33˝8.2 CFM at 90 PSI • Shpg. 250 lbs.

Truck freight only.

Oil-lessCompressor

ITEM 4-1586$29.95• New, CHEMAIR. Oil-less diaphragmcompressor. Features include pressureswitch, inlet filter and 70˝ line cord. Idealhobby or bench compressor, air brushsupply, aeration and other low pressureapplications. Includes 3/16˝ hosebarb.SPECIFICATIONS• Voltage 115 AC • Pressure switch• Amps 2 ON 15 PSI, OFF 23 PSI• HP 1/20 • OUT port ⅛˝ NPT• 0.27 CFM at 0 PSI • Size 6¼˝ x 3½˝ x 6½˝• 0.18 CFM at 20 PSI • Shpg. 9 lbs.

Rotary Vane Oil-lessVacuumPump

ITEM 4-1808$27.99• New, GAST Model 0533-U107 rotaryvane pump. Use for vacuum or low pres-sure air. Oil-less, nearly pulse-free flow.Cast iron body with carbon vanes. Integralfoot mount. Ball bearings.SPECIFICATIONS • Ports ⅛˝ NPT• Open air flow 0.6 CFM • Shaft 5/16˝ dia. x ⅝˝ w/flat• Max. vacuum 20˝ HG • Shaft height 2˝• Max. pressure 15 PSI • Rotation CCW• Speed rating 3450 RPM • Size 3˝ x 2⅝˝ x 3˝• HP required 1/15 HP • Shpg. 3 lbs.

135 VDCVacuumPumpITEM 4-1801$14.95• New, small vacuum pump originallymade for use in a machine for vacuum-sealing food. Single piston design. Ther-mally protected motor. Use with a rectifier(not included) to operate on 115 VAC.Ports point straight down (towards motorbody). Wire leads.SPECIFICATIONS• Voltage 135 DC • Ports ¼˝ hosebarbs• Amperage 0.22 Amps • Duty intermittent• Power 30 watts • Size 5½˝ x 2½˝ x 3¾˝• Vacuum 25˝ Hg max. • Shpg. 4 lbs.

CompressorUnloaderValve

ITEM 4-1499$34.95• Brand new. Use on compressors drivenby continuous power input (gas engines,hydraulic, etc.). Once tank reaches fullpressure incoming air from compressor isvented to atmosphere. ¼˝ NPT tank con-nection, ¼˝ tubing connection for air line,⅛˝ NPT for idle control or head unloader.Toggle lever to override. Size 3˝ x 3½˝ x1½˝. Shpg. 1 lb.

In-tank CheckValves• Brand new brass construc-tion air check valve. Threadsdirectly into tank port. Allowone way airflow from compres-sor to tank. Auxiliary port forconnection to unloader valveon pressure switch.SPECIFICATIONS FOR ALL• 400 PSI max. • Cracking pressure 4 PSI• Unloader port ⅛˝ NPT • Temp. -250 to 350° F

ITEM 4-1769 $12.95SPECIFICATIONS• Tank thread ½˝ NPT • 1˝ hex x 213/16˝• Inlet thread ½˝ NPT • Shpg. 1 lb.

ITEM 4-1770 $17.95SPECIFICATIONS• Tank thread ¾˝ NPT • 13/16˝ hex x 315/16˝• Inlet thread ¾˝ NPT • Shpg. 1 lb.

ITEM 4-1771 $45.95SPECIFICATIONS• Tank thread 1˝ NPT • 1½˝ hex x 315/16˝• Inlet thread 1˝ NPT • Shpg. 1½ lbs.

115 VAC TwinCompressor

ITEM 4-1849$69.99

• Used, THOMAS INDUSTRIES Model#2660CE48-400. Twin cylinder oil-lessWOB-L piston compressor. Includes ca-pacitor. Open fan at each end.SPECIFICATIONS • Duty continuous• Voltage 115 AC • Ports ¼˝ NPT• Amps 5.6 • Size 9˝ x 5½˝ x 7˝• PSI 40 max. • Shpg. 21 lbs.

Mini AirRegulatorw/GaugeITEM 4-1780$5.95• New, Campbell Hausfeld part #RE206901AV. Inline air pressure regulatorw/gauge.SPECIFICATIONS• Inlet 200 PSI max. • Gauge port ⅛˝ NPT• Outlet range 135 PSI • Size 3⅝˝ x 1½˝ x 2¾˝• Ports ¼˝ NPT • Shpg. ½ lbs.

Adjustable AirRegulator

ITEM 4-1489$7.99• New, NORGREN R72M-2AK-RFN. Ro ta -ry knob for adjusting outlet pressure with“push on” lock to maintain setting. Two in-lets for stacking regulators together formultiple air lines.SPECIFICATIONS• PSI 300 max. • Gauge ⅛˝ NPT• Adj. range 0-60 PSI • Size 2˝ x 2˝ x 4⅜˝• IN/OUT ¼˝ NPT • Shpg. 3 lbs.

⅜˝ Air Regulatorw/Gauge

ITEM 4-1815$12.99• New, DEVILBISS Model A18675 ad-justable air pressure regulator. Suppliedwith hose elbow for ½˝ ID air hosethreaded into body.SPECIFICATIONS• Ports ⅜˝ NPT • Gauge 200 PSI• Outlet pressure range • Size 2⅛˝ x 3⅜˝ x 4½˝7-125 PSI • Shpg. 1 lb.

⅜˝ Air Lubricator

ITEM 4-1739$14.95• New, DEVILBISS ModelACP211 pneumatic lubricator.Die-cast aluminum body andbowl. Adjustable oil feed rate.SPECIFICATIONS • 3.5 oz. quick release bowl• 250 PSI max. inlet press. • Temp. 75° max.• 29 SCFM at 90 PSI • Size 2¾˝ x 2⅜˝ x 8⅛˝• Ports ⅜˝ NPT • Shpg. 3 lbs.

3 Spool,12 VDC DAAir Valve

ITEM 4-1810$59.99• New, built by PNEUMADYNE. Dual sole-noids for each spool. Each port has an ad-justable relief valve.SPECIFICATIONS• Ports ¼˝ NPT • Size 4½˝ x 3˝ x 4˝• Pressure 150 PSI max. • Shpg. 4 lbs.

¼˝ Air Muffler

ITEM 4-1826$1.29• Removed from new equipment ¼˝ NPTair muffler. Sintered bronze element mate-rial. Quiets discharge air from cylinders,vacuum pumps, etc. Shpg ¼ lb.

¼˝ NPT BrassBall Valve

ITEM 20-1486$2.99• New, ONDA brass ball valve. Use in com-pressed air, water and gas systems.Teflon-coated, stainless steel ball.SPECIFICATIONS• 150 PSI max. • Size 1⅝˝ x ⅝˝ x 1½˝• Ports ¼˝ NPT M/F • Shpg. ¼ lb.

94 Air Regulators & Fittings www.surpluscenter.com8

¼˝ Quick ChangeAir HoseCoupler

ITEM 20-1431 $4.95• Brand new. Industrial interchange H-stylequick coupler. 300 PSI max. Air flow to 67CFM. Brass body with steel plug and re-lease collar. ¼˝ NPT male at each end.Shpg. 1 lb.

Air Muffler/Filter

ITEM 4-174979¢• New, NUMATICS sintered bronze muf-fler/filter. ⅛˝ NPT male. Size 19/32˝ O.D. x ¾˝long. Shpg. 1/10 lb.

¼˝ Quick CouplerM/FITEM 4-1799$4.95• New, quick coupler for air circuits. H styleindustrial interchange. Socket is valved,shutting off supply line at disconnect. Plugis unvalved, exhausting downstream line atdisconnect. Install socket on pressure sideof line.SPECIFICATIONS • Airflow 67 CFM• Connections ¼˝ NPT • Size 13/16˝ dia. x 3˝• Pressure 300 PSI • Shpg. 1 lb.

Quick Change Air HoseCouplers

ITEM 438 Complete Unit(Coupler and Adapter)

ITEM 439 ITEM 440• Brand new. Install at one end of hoses toair equipment.• Compressor need not be shut off. Swivelaction helps prevent hose kinking. Changefrom one air tool to another in seconds.• Couplers ¼˝ female NPT. Adapter ¼˝ maleNPT. Complete unit ¾˝ x 2½˝. Shpg. 1 lb.

ITEM 438 $5.20• Complete unit (coupler and adapter).

ITEM 439 95¢

• Male hose adapter only. Shpg. ¼ lb.

ITEM 440 $1.00• Female hose adapter only. Shpg. ¼ lb.

Air Regulator

ITEM 4-1629$29.95• New, BERENDSEN Model R84H-3BL-SGO (NORGREN Model R73G-3AK-RFN).Relieving air pressure regulator. Relievingcharacteristic allows reduction of down-stream airpressure when system is dead-ended. Aluminum construction withlocking adjustment knob on top.SPECIFICATIONS • Ports• Input PSI 300 max. work ⅜˝NPT, gauge ¼˝NPT• Adj. output PSI 5-60 • Size 2⅝˝ x 2⅜˝ x 5⅛˝• CFM 144 max. • Shpg. 3 lbs.

Air Fittings

AA-BB CC-DD EE-FF GG-GA HH-II JJ KK-KA

LW-LL MM-MA NN-NNA PP-QQ RR-SS-TT UU-VV ZD

• Brand new. Brass (except clamps). Givefull description on order (¼˝ Tee = 455-LL).Shpg. ¼ lb. ea.ITEM 455- (AA) Male hose end, ¼˝ hose x ¼˝ NPT ....... $1.25 (BB) Male hose end, ⅜˝ hose x ¼˝ NPT ....... $1.35 (CC) Female NPT, ¼˝ hose x ¼˝ NPT ........... $1.99 (DD) Female NPT, ⅜˝ hose x ¼˝ NPT ........... $2.10 (EE) Hose mender, ¼˝ hose x ¼˝ hose......... $1.10 (FF) Hose mender, ⅜˝ hose x ⅜˝ hose......... $1.30 (GA) Reducer, ¼˝ NPT x ⅛˝ NPT .................. $1.30(GG) Hex nipple, ¼˝ x ¼˝ NPT ...................... $1.40 (HH) Bushing, ⅛˝ female x ¼˝ male NPT...... $ .70 (II) Bushing, ¼˝ female x ⅜˝ male NPT ...... $1.20 (JJ) Coupling, ¼˝ x ¼˝ female NPT ............. $2.50 (KA) 90° elbow, ⅛˝ NPT ............................... $1.75 (KK) 90° elbow, ¼˝ NPT ............................... $3.95 (LL) Tee, ¼˝ NPT.......................................... $3.85 (LW) Tee, ⅛˝ NPT.......................................... $2.85 (MA) Cross, ⅛˝ NPT...................................... $2.25(MM) Cross, ¼˝ NPT...................................... $5.75 (NN) Filling valve, ⅛˝ NPT............................. $1.30(NNA)Filling valve, ¼˝ NPT............................. $2.00 (PP) Clamp, for standard ¼˝ ID hose........... $ .38(QQ) Clamp, for standard ⅜˝ ID hose........... $ .39 (RR) Compression Coupling

¼˝ NPT x ¼˝ cu. tubing ........................ $1.55 (SS) Compression coupling

¼˝ NPT x 5/16˝ cu. tubing ....................... $1.85 (TT) Compression coupling

¼˝ NPT x ⅜˝ cu. tubing ........................ $1.95 (UU) ⅛˝ Street Elbow.................................... $2.45 (VV) ¼˝ Street Elbow.................................... $2.90 (ZD) 90° elbow, ½˝ x ⅜˝ NPT M/M ............... $1.95

Air ControlValve

ITEM 4-1668 $93.95• Brand new AIR-MITE Model V-4210-3P.Use for operating single or double actingair cylinders. Anodized aluminum body. Allports blocked in spring centered position.SPECIFICATIONS • Treadle style foot pedal• Ports ¼˝ NPT • Spring centered• PSI 150 • Size 7˝ x 2⅜˝ x 1⅝˝• Three position • Shpg. 2 lbs.

24 VACSolenoidValve

ITEM 20-1311$9.99• New, ASCO. Operates on 24 VAC, 6watts. Ports ⅛˝ NPT. Pressure ratings air275 PSI, water 200 PSI, oil 150 PSI. Nor-mally open two ways. Brass body. Size 3¼˝x 2˝ x 1½˝. Shpg. 1½ lbs.

Air Filter

ITEM 4-1565$5.99• New take-offs DONALD-SON. Plastic housing air fil-ter. Spin on clear bowl foreasy element checking.SPECIFICATIONS • Outlet ¼˝ NPT• PSI 35 max. • Size 3¾˝ diam. x 6⅛˝• ½˝ hosebarb on inlet port • Shpg. 1 lb.

4 Way 2 PositionAirValveITEM 20-1423$19.99• New, BOSCH Model 0 820 024 126. 24VDC, 4 way 2 position valve for doubleacting cylinder. Pilot pressure required toshift valve. Spring return.SPECIFICATIONS• Voltage 24 DC • In/Cyl./Exhaust ¼˝ NPT• 4 way 2 position, • Pilot port ⅛˝ NPTspring return • Size 6⅜˝ x 3⅜˝ x 37/16˝

• PSI 145 max. • Shpg. 2 lbs.

Air FlowControl

ITEM 4-1305$4.99

• New, ESSEX. Use to vary speed of aircylinders. 8 step rotary dial changes inter-nal orifices to adjust volume of air. 3/16˝hosebarb connections. Plastic construc-tion. Size 2½˝ x 1½˝ x 1½˝. Shpg. ½ lb.

800-488-3407 Air Valves 95&

Pilot OperatedAir ValveAssembly

ITEM 4-1813$32.99• New, NUMATICS Model 33JDR pilot op-erated 2 position directional air valve. De-tent holds spool in place until pilot pressureis applied. Furnished as a kit with assortedfittings, air lines and quick couplers.SPECIFICATIONS• Inlet & Exhaust • Pilot ports ⅛˝ NPTports ⅜˝ NPT • Size 8˝ x 4˝ x 5½˝

• Work ports ⅜˝ NPT • Shpg. 20 lbs.

24 VDC N.C.Air Valve

ITEM 20-1452$6.95

• New, CLIPPARD Model ET-3. Two posi-tion, normally closed air valve. Flow is al-lowed to pass through valve when 24 VDCis applied. Outlet is vented in unenergizedstate.SPECIFICATIONS• 24 VDC • CFM 0.6 max. at 100 PSI• Watts 0.67 • PSI 100 max.• IN/OUT ports 10-32 • Mount 2 bolt on ½˝ ctrs.incl. ⅛˝ hosebarb adapters • Size ⅞˝ diam. x 1½˝

• Orifice 0.025˝ • Shpg. ¼ lb.

24 VDC, 3 WaySolenoidValveITEM 20-1615$4.99• New, Snap-tite/Allied Model V3W3X-24three way brass solenoid valve.SPECIFICATIONS• Coil voltage 24 DC • Orifice 3/64˝ - 5/64˝• Pressure 50 PSI • Size 1˝ dia. x 3˝• Ports ⅛˝ NPT • Shpg. 1 lb.

Humphrey Solenoid Air Valves• New, HUMPHREY solenoid air valves.See our website for more specifications.S = Single Solenoid D = Double Solenoid

SPECIFICATIONS• Manual over-ride • Pressure & work ports ⅛˝ NPT• Air temperature 32° to 122° F • Exhaust ports 10-32 UNC

ITEM Model Solenoid Configuration Voltage Current Flow PSI Range Size Shpg. Price 4-10426 H050LE1-01 S 3 way, 2 position 24 VDC 100 mA 0.08 Cv 0-100 3¼˝ x 11/16˝ x 17/16˝ 1 lb. $39.95 4-10441 H050-4LE1-01 S 4 way, 2 position 5 port 24 VDC 100 mA 0.07 Cv 0-100 3¼˝ x 11/16˝ x 17/16˝ 1 lb. $39.95 4-10444 H050-4E2-01 D 4 way, 2 position 5 port 24 VDC 240 mA 0.07 Cv 20-100 511/16˝ x 11/16˝ x 17/16˝ 1½ lb. $39.95

2 Position, 4 Way Air Valve

ITEM 20-1255 $29.99• New, MAC Model 180001-112-0124pneumatic directional control valve. Twoposition, four way valve with five ports foruse with double-acting air cylinder. Fur -nished with roller bearing on arm for useas a limit switch or can be manually oper-ated. Arm has three positions and is springloaded to center position. Moving arm ei-ther forward or back will actuates cylinder.When arm is in center position, cylinderreturns to original position.SPECIFICATIONS• Two position • ¼˝ NPT ports• Four way • Size 5˝ x 1⅞˝ x 1˝• 150 PSI max. • Shpg. 1 lb.

24 VDC 4 Way 2 PositionAir Valve

ITEM 4-1700$9.95• New, FESTO Model MFH-5-PK-3. 24VDC 4.5 watts, 4 way 2 position valve fordouble acting cylinder. Single solenoidwith mechanical spring return. Pilot pres-sure required to shift valve. Will fit intoFesto 2N frame rails (not included).SPECIFICATIONS• 24 VDC • All ports are hosebarbs• 4 way 2 position, for 3mm tubingspring return • Size 4¼˝ x 1˝ x 2¾˝

• 43-116 PSI range • Shpg. 1 lb.

Air ControlValves

4-1542 & 4-1544 4-1543• Brand new AIR-MITE. Use for operatingsingle or double acting air cylinders. An-odized aluminum body. Ports ¼˝ NPT.Rated 150 PSI. Shpg. 2 lbs.

ITEM 4-1542 $70.95• Model V-4203. Two position, lever oper-ated. Manual return. Size 5½˝ x 2˝ x 1⅜˝.

ITEM 4-1544 $93.95• Model V-4204-3P. Three position, leveroperated. Spring return to center. Size 5½˝x 2˝ x 1⅜˝.

ITEM 4-1543 $70.95• Model V-4208. Two position, foot pedaloperated. Spring return. Size 7˝ x 2⅜˝ x1⅝˝.

96 Pressure Switches www.surpluscenter.com8

Air Pressure Switchw/Unloader& Override

ITEM 4-1797$14.95• New HUBBELL ICD Model A12491 airpressure switch. Has unloader connectionto allow motor to start without load. Man-ual lever has automatic and off positions.Bottom mounting manifold has 4 ports forconnecting to tank, relief valve, gauge andhose. Open design requires a protectivecover for safety (not included).SPECIFICATIONS • Amp rating• Manifold block ports 24 amps at 120 VACfour ¼˝ NPT • Preset

• Unloader connection On 160 PSI, Off 200 PSI¼˝ OD tubing • Contacts 1 pole

• Size 3½˝ x 3¾˝ x 3½˝ • Shpg. 2 lbs.

AutomaticPressureSwitchITEM 11-3044-G$17.95• New, SQUARE D. For compressed air orwater systems. Automatically switch elec-tric motor ON or OFF at pre-set values.Built-in mechanical Auto/Start Off switch.Adjustable differential within setting shown.SPECIFICATIONS • Factory set ON at 20 PSI• Model 9013FSG 2M4U2 • Factory set OFF at 40 PSI• Rated 1½ HP at 115 VAC • Adj. differential 15-30 PSI• Rated 2 HP at 230 VAC • Port ¼˝ NPT• Adj. cut in 10-45 PSI • Size 4˝ x 2¾˝ x 3½˝• Adj. cut out 20-65 PSI • Shpg 2 lbs.

WaterPressureSwitch

ITEM 11-2576$12.99

• New FURNAS. Starts/stops motor astank pressure changes. Cut-in at 20 PSI,cut-out at 40 PSI. Rated 115 volt AC, 1½HP. Port ¼˝ NPT. Size 3½˝ x 2¼˝ x 3˝.Shpg. 1½ lbs.

AutomaticPressureSwitches

ITEM 11-3044-E$11.95• New, Square D Model 9013FTG14Z22pressure switch. For compressed air orwater systems. Auto mati cally switch elec-tric motor ON or OFF at pre-set values. Ad-justable differential within setting shown.SPECIFICATIONS• Rated 1 HP at 115/230 VAC • 80 PSI max.• Factory set ON at 20 PSI • ¼˝ hose barb connection• Factory set OFF at 40 PSI • Size 4˝ x 2¾˝ x 3½˝• Double pole contacts • Shpg. 2 lbs.

ITEM 11-3044-F $11.95• New, STA-RITE SK-2.SPECIFICATIONS• Rated 1½ HP • Adj. cut-in range 20-40 PSIat 115 VAC & 20 amps • Adj. cut-out range 40-60 PSI

• Rated 2 HP • Adj. differential of 20 PSIat 230 VAC & 12 amps • Port ¼˝ NPT

• Factory set ON at 40 PSI • Size 4˝ x 2¾˝ x 3½˝• Factory set OFF at 60 PSI • Shpg. 2 lbs.

AutomaticPressureSwitchITEM 11-3042$9.95• New, pressure switch. For compressed airor water systems. Automatically switchelectric motor ON/OFF at pre-set values.Two pressure adjustment screws: one ad-justs cut-out and cut-in pressure setting atsame time, second screw adjusts the cut-out only. Plastic housing.SPECIFICATIONS • Port ¼˝ NPT• Rated 1½ HP at 115V • Factory set OFF at 50 PSI• Factory set ON at 30 PSI • Adj. cut out range 40-100• Size 3¾˝ x 3⅝˝ x 3¾˝ • Shpg. 2 lbs.

Air Pressure Switchw/Unloader And

Override

ITEM 4-1816$16.95

• New, take-off air compressor pressureswitch. LEFOO Model LF10-4H. Has un-loader connection to allow motor to startwithout load. Manual switch has automaticand off positions. Four ports allow additionof gauge, output line, etc.SPECIFICATIONS • Switch setting• HP rating 95 PSI on/ 125 PSI off1.5 HP 120 VAC (20 amps) • Unloader connection2 HP 240 VAC (12 amps) ¼˝ OD tubing

• Contacts 2 Pole • Size 3¾˝ x 3¼˝ x 3¾˝• Ports G-¼˝ female (metric) • Shpg. 1 lb.

Automatic Pressure Switches

$9.95 each• Brand new, LEFOO automatic pressure switch for compressedair systems. Automatically turns electric motor ON or OFF at setvalues. Adjustable differential. Unloader port ¼˝ OD copper tub-ing which allows compressor to start without back pressure load.Sturdy plastic housing. Manual OFF switch.SPECIFICATIONS• Contact ratings 120 VAC: 1½ HP at 20 amps 32 VDC: ¼ HP at 8.6 amps 240 VAC: 2 HP at 12 amps 120 VDC: ¼ HP at 3.1 amps 240 VAC 3 Ph.: 3 HP at 9.6 amps 240 VDC: ¼ HP at 1.6 amps• Size 3¾˝ x 3⅜˝ x 3¼˝ • Shpg. 1½ lbs.

Factory Setting Min. On Max. OFFITEM ON (Cut-In) OFF (Cut-Out) (Cut-In) (Cut-Out) Differential Ports

4-1819-L1 95 PSI 125 PSI 35 PSI 150 PSI 30-40 PSI ¼˝ NPT (x1)4-1819-L4 95 PSI 125 PSI 35 PSI 150 PSI 30-40 PSI ¼˝ NPT (x4)4-1819-H1 140 PSI 175 PSI 50 PSI 175 PSI 35-55 PSI ¼˝ NPT (x1)4-1819-H4 140 PSI 175 PSI 50 PSI 175 PSI 35-55 PSI ¼˝ NPT (x4)

Metal HousingPressureSwitches

$28.95 each• Brand new, LEFOO automatic pressureswitch for compressed air systems. Auto-matically turns electric motor ON or OFFat set values. Adjustable differential. Un-loader port ¼˝ OD copper tubing which al-lows compressor to start without backpressure load. Sturdy metal housing. Sin-gle port.SPECIFICATIONS FOR BOTH• Contact rating • Min. ON (cut-in) 40 PSI2 HP, 24 amps at 120 VAC • Differential 25-60 PSI3 HP, 20 amps at 240 VAC • Size 3¾˝ x 3½˝ x 4¼˝

• Port ¼˝ NPT • Shpg. 3 lbs.

Factory Setting ON OFF Max. OFF

ITEM (cut-in) (cut-out) (cut-out)4-1820-H1 145 PSI 175 PSI 250 PSI4-1820-L1 105 PSI 135 PSI 200 PSI

Heavy DutyAutomaticPressureSwitches

• Brand new, SUNNY automatic pressureswitch for compressed air systems. Auto-matically turns electric motor ON or OFFat set values. Adjustable differential. Un-loader port ¼˝ OD copper tubing which al-lows compressor to start without backpressure load. Sturdy plastic housing.Manual off switch.SPECIFICATIONS• Contact ratings25 amps at 120 VAC 25 amps at 32 VDC25 amps at 240 VAC 25 amps at 120 VDC25 amps at 240 VAC 3 Ph 25 amps at 230 VDC

• Port(s) ¼˝ NPT• Size 3¾˝ x 3˝ x 3⅛˝ • Shpg. 1½ lbs.

Factory SettingON OFF

ITEM Port(s) (Cut-In) (Cut-Out) Price4-1823-L1 1 95 PSI 125 PSI $13.954-1823-H1 1 140 PSI 175 PSI $13.954-1823-L4 4 95 PSI 125 PSI $13.954-1823-H4 4 140 PSI 175 PSI $13.95

115 VAC TwinCompressor

ITEM 4-1825$69.99

• New, THOMAS INDUSTRIES Model#2619CE48-116B. Twin cylinder oil-lessWOB-L piston compressor. Includes ca-pacitor. Open fan at each end.SPECIFICATIONS• Voltage 115 AC • Duty continuous• Amps 5 • Ports ¼˝ NPT• PSI 15 max. • Size 9⅜˝ x 5˝ x 6¾˝• CFM 3.2 open flow • Shpg. 18 lbs.

2˝ Bore, 6˝ StrokeAir Cylinder

ITEM 4-1846 $39.95• New, CKD Model SCM-50B150 doubleacting air cylinder. Adjustable cushions ateach end. Furnished with clevis on rod(12mm pin hole) and U shaped bracket atbase end.SPECIFICATIONS • Ports ¼˝ NPT• Double Acting • Retracted lgth. 15˝• Bore 2˝(50mm) (clevis pin center to center• Stroke 6˝ (150mm) of holes on bracket)• Rod dia. 20mm • Mount 4 tapped holes• Rod thread M18-1.5 each end 32mm sq.• Pressure 145 PSI max. • Shpg. 6 lbs.

12 VDC MiniAirPump

ITEM 4-1830 $5.99• Used, Koge Electronics, miniature oil-less diaphragm air pump. Model KPM27H-12B5. Plastic body. Integral mountingbracket with 1 hole.SPECIFICATIONS • Pressure 350mm HG• Voltage 12 DC • Connection 0.19˝ hosebarb• Current 0.3 amps • Size 3˝ x 1½˝ x 1⅛˝• Airflow 2.0 liter/min • Shpg. ½ lb.

Compact12 VDCPump

ITEM 2-1386$4.95• Used small 12 VDC centrifugal pump.Non-submersible. Inlet seal designed to beheld against water reservoir. Auxiliary 1/16˝ I.D.line on pump intake. Plastic construction.SPECIFICATIONS• Voltage 12 VDC • Inlet mount• Flow 1 GPH 2 holes 1.55˝ c/c• Inlet 1¼˝ dia seal • Pump mountwith ½˝ opening 2 holes 0.55˝ c/c

• Outlet 3/16˝ ID tubing • Size 5¼˝ x 2˝ x 2˝w/check valve • Shpg. 1 lb.

Mower SpindleITEM 1-3724$18.99• New, aluminum hous-ing spindle assembly.Built for Bushhog HS ZTRmowers. Two 25mm ballbearings to support shaft.SPECIFICATIONS• Input shaft ⅞˝ dia. x 1˝ with ⅝˝-11 thread (⅞˝ long)• Blade mount 2⅜˝ dia. with ½˝-20 female thread• Mounting pilot 3˝ dia. x 1˝ long• Mounting four ⅜˝ holes on 4½˝ B.C.• Size 5.2˝ dia. x 4.45˝• Shpg. 6 lbs.

800-488-3407 Miscellaneous 97&

12 VDCClutch

ITEM 1-3725$119.99• New. WARNER ELECTRIC Model521928 12 volt DC clutch. Ideal replace-ment for mowers. Two bolt mount. Plug-inconnector.SPECIFICATIONS • Rotation CCW• Voltage 12 DC • Mount 2 hole• Current 3.25 amps • Hub 1 ̋bore x 1¾ ̋w/keyway• Torque rating 105 ft.lbs. • Thru bore lgth. 3⅛˝• Pulley 5.345˝ dia. 1 groove • Size 5˝ x 7˝ x 3˝• Belt width ¾˝ • Shpg. 11 lbs.

Rubber Vibration-IsolationFoot MountITEM 1-323539¢• New, rubber vibration-isolation foot mount.Round, cupped rubber mount with platedmetal insert. Thru-hole for a bolt (not included).SPECIFICATIONS• O.D. 1½˝ • Depth inside 11/32˝• I.D. ¾˝ • Bolt hole ¼˝• Height overall ⅝˝ • Shpg. 1/10 lb.

ZTR Steering Damper

ITEM 1-3579 $2.99• New, SROID (Smoothly, Reversing, Ori-entation, Independent, Damper) by Sta-bilus. Use to dampen movement in eitherdirection. Originally to dampen movementof controls on ZTR mowers.SPECIFICATIONS • Base end fitting swivel rod,• Stroke 80mm 5/16-18 stud• Rod dia. 8mm • Extended length 13˝• Cylinder O.D. 24mm • Compressed length 10˝• Rod end fitting 10mm ball • Shpg. 1 lb.

Bearing And ShaftAssemblyITEM 1-3696$4.99• New, NSK precision sealed bearing withshaft pressed through. Bearing shell hastwo machined grooves.SPECIFICATIONS • Total shaft length 4⅝˝• Bearing 1½˝ O.D. • Shpg. 1½ lbs.• Long shaft end • Short shaft end

¾˝ dia. x 2˝ ¾˝ dia. x ½˝⅛˝ woodruff key slot 9/16˝ wrench flatsexternal ¾-16 thread ⅜-24 internal thread

Air Pressure Switchw/UnloaderAndOverrideITEM 4-1842$9.99• New, air compressor pressure switch.HUBBEL Model 69JF109820R. Has un-loader connection to allow motor to startwithout load. Manual switch has automaticand off positions. 4 ports allow addition ofgauge, output line, etc.SPECIFICATIONS• Current ratings • Ports ¼˝ NPT24 Amps 120/240 VAC • Unloader connection

• Contacts 2 pole ¼˝ OD tubing• Switch setting • Size 3½˝ x 3½˝ x 3¾˝145 PSI on/ 175 PSI off • Shpg. 1 lb.

24 VDCSolenoidValve

ITEM 20-1412$9.99• New, GENERAL CONTROLS catalognum ber AV1A1123 solenoid valve. Alu-minum valve body.SPECIFICATIONS• Coil voltage 28 VDC • Duty continuous• Power 8 Watts • Mount 2 bolts 1⅜˝ ctrs.• Normally closed • Ports SAE 4• Pressure 50 PSI max. • Size 1⅜˝ x 2˝ x 3¾˝• Equivalent port 0.172˝ • Shpg. 1½ lbs.

12 VDCClutch

ITEM 1-3565$129.99• New WARNER ELECTRIC Model5218251 12 volt DC clutch. Ideal replace-ment for mowers. Two bolt mount. Plug-inconnector.SPECIFICATIONS• Voltage 12 DC • Hub 1˝ bore x 3⅛˝ wide• Pulley 7¼˝ dia. 1 groove w/keyway• Belt width ⅝˝ • Size 7⅛˝ x 8˝ x 3⅛˝• Mount 2 hole • Shpg. 14 lbs.

VariableDrivenPulleyITEM 1-3530$89.95• New, Powerbloc by CVtech-IBC. Built forCub Cadet utility vehicles. Part #618-04679. Aluminum construction. Workingdiameter changes with RPM. Rubbercushions at each end of travel as centerhub slides to vary pulley diameter.SPECIFICATIONS• Horsepower 70 • Max dia 9˝• Max RPM 10,000 • Belt size 1⅜˝ width max.• Bore 18 tooth spline • Size 9˝ x 5⅝˝• Bore 20mm smooth • Shpg. 9 lbs.

898 Pillow Block Bearings www.surpluscenter.com

Pillow Block Normal Duty

UCP Series - Two Set Screws, No Lock Collar Dimensions

Bore ITEM Shpg. Price A B H H1 HO J L Bolt N1 N2

½˝ 1-201-08-P 3 $8.95 1.457 1.221 1.311 0.551 2.512 3.780 5.000 ⅜ 0.512 0.630 ⅝˝ 1-202-10-P 3 $8.95 1.457 1.221 1.311 0.551 2.512 3.780 5.000 ⅜ 0.512 0.630 ¾˝ 1-204-12-P 3 $8.95 1.457 1.221 1.311 0.551 2.512 3.780 5.000 ⅜ 0.512 0.630 ⅞˝ 1-205-14-P 3 $8.95 1.496 1.339 1.437 0.591 2.736 4.134 5.512 ⅜ 0.512 0.748 15/16˝ 1-205-15-P 3 $8.95 1.496 1.339 1.437 0.591 2.736 4.134 5.512 ⅜ 0.512 0.748 1˝ 1-205-16-P 3 $8.95 1.496 1.339 1.437 0.591 2.736 4.134 5.512 ⅜ 0.512 0.748 1⅛˝ 1-206-18-P 4 $11.95 1.732 1.500 1.689 0.630 3.228 4.764 6.500 ½ 0.699 0.826 13/16˝ 1-206-19-P 4 $11.95 1.732 1.500 1.689 0.630 3.228 4.764 6.500 ½ 0.669 0.826 1¼˝ 1-206-20-P 4 $11.95 1.732 1.500 1.689 0.630 3.228 4.764 6.500 ½ 0.669 0.826 1¼˝ 1-207-20-P 5 $13.95 1.890 1.689 1.874 0.669 3.622 4.961 6.575 ½ 0.669 0.826 15/16˝ 1-207-21-P 5 $13.95 1.890 1.689 1.874 0.669 3.622 4.961 6.575 ½ 0.669 0.826 1⅜˝ 1-207-22-P 5 $13.95 1.890 1.689 1.874 0.669 3.622 4.961 6.575 ½ 0.669 0.826 17/16˝ 1-207-23-P 5 $13.95 1.890 1.689 1.874 0.669 3.622 4.961 6.575 ½ 0.669 0.826 1½˝ 1-208-24-P 6 $16.95 2.047 1.937 1.937 0.709 3.858 5.354 7.250 ½ 0.669 0.827 1⅝˝ 1-209-26-P 7 $16.95 2.126 1.938 2.126 0.787 4.154 5.748 7.469 ½ 0.669 0.827 111/16˝ 1-209-27-P 7 $16.95 2.126 1.938 2.126 0.787 4.154 5.748 7.469 ½ 0.669 0.827 1¾˝ 1-209-28-P 7 $16.95 2.126 1.938 2.126 0.787 4.154 5.748 7.469 ½ 0.669 0.827 1⅞˝ 1-210-30-P 8 $20.95 2.244 2.032 2.252 0.827 4.417 6.260 8.125 ⅝ 0.781 0.866 115/16˝ 1-210-31-P 8 $20.95 2.244 2.032 2.252 0.827 4.417 6.260 8.125 ⅝ 0.781 0.866 2˝ 1-210-32-P 8 $20.95 2.244 2.032 2.252 0.827 4.417 6.260 8.125 ⅝ 0.781 0.866 2˝ 1-211-32-P 10 $25.95 2.362 2.189 2.500 0.866 4.902 6.772 8.625 ⅝ 0.781 0.866 2⅛˝ 1-211-34-P 10 $25.95 2.362 2.189 2.500 0.866 4.902 6.772 8.625 ⅝ 0.781 0.866 23/16˝ 1-211-35-P 10 $25.95 2.362 2.189 2.500 0.866 4.902 6.772 8.625 ⅝ 0.781 0.866 2¼˝ 1-212-36-P 12 $30.95 2.598 2.563 2.752 0.945 5.394 7.323 9.500 ⅝ 0.781 0.984 2⅜˝ 1-212-38-P 12 $30.95 2.598 2.563 2.752 0.945 5.394 7.323 9.500 ⅝ 0.781 0.984 27/16˝ 1-212-39-P 12 $30.95 2.598 2.563 2.752 0.945 5.394 7.323 9.500 ⅝ 0.781 0.984 2½˝ 1-213-40-P 16 $40.95 2.756 2.563 3.000 1.024 5.866 7.992 10.437 ¾ 1.000 1.188 2¾˝ 1-214-44-P 18 $49.95 2.835 2.937 3.126 1.063 6.102 8.268 10.472 ¾ 1.000 1.188 215/16˝ 1-215-47-P 19 $56.95 2.913 3.063 3.252 1.102 6.362 8.543 10.813 ¾ 1.000 1.188 3˝ 1-215-48-P 19 $56.95 2.913 3.063 3.252 1.102 6.362 8.543 10.813 ¾ 1.000 1.188

HCP Series - Eccentric Locking Collar w/Set Screws Dimensions

Bore ITEM Shpg. Price A B H H1 HO J L Bolt N1 N2

½˝ 1-201-08-P-C 3 $9.95 1.457 1.713 1.311 0.551 2.512 3.780 5.000 ⅜ 0.5118 0.630 ⅝˝ 1-202-10-P-C 3 $9.95 1.457 1.713 1.311 0.551 2.512 3.780 5.000 ⅜ 0.5118 0.630 ¾˝ 1-204-12-P-C 3 $9.95 1.457 1.713 1.311 0.551 2.512 3.780 5.000 ⅜ 0.5118 0.630 ⅞˝ 1-205-14-P-C 3 $9.95 1.496 1.744 1.437 0.591 2.736 4.134 5.512 ⅜ 0.5118 0.748 15/16˝ 1-205-15-P-C 3 $9.95 1.496 1.744 1.437 0.591 2.736 4.134 5.512 ⅜ 0.5118 0.748 1˝ 1-205-16-P-C 3 $9.95 1.496 1.744 1.437 0.591 2.736 4.134 5.512 ⅜ 0.5118 0.748 1⅛˝ 1-206-18-P-C 4 $12.95 1.732 1.902 1.689 0.630 3.228 4.764 6.500 ½ 0.669 0.826 13/16˝ 1-206-19-P-C 4 $12.95 1.732 1.902 1.689 0.630 3.228 4.764 6.500 ½ 0.669 0.826 1¼˝ 1-206-20-P-C 4 $12.95 1.732 1.902 1.689 0.630 3.228 4.764 6.500 ½ 0.669 0.826 1¼˝ 1-207-20-P-C 5 $15.95 1.890 2.012 1.874 0.669 3.622 4.961 6.575 ½ 0.669 0.826 15/16˝ 1-207-21-P-C 5 $15.95 1.890 2.012 1.874 0.669 3.622 4.961 6.575 ½ 0.669 0.826 1⅜˝ 1-207-22-P-C 5 $15.95 1.890 2.012 1.874 0.669 3.622 4.961 6.575 ½ 0.669 0.826 17/16˝ 1-207-23-P-C 5 $15.95 1.890 2.012 1.874 0.669 3.622 4.961 6.575 ½ 0.669 0.826 1½˝ 1-208-24-P-C 6 $16.95 2.047 2.217 1.937 0.709 3.858 5.354 7.250 ½ 0.669 0.827 1⅝˝ 1-209-26-P-C 7 $18.95 2.126 2.217 2.126 0.787 4.154 5.748 7.469 ½ 0.669 0.827 111/16˝ 1-209-27-P-C 7 $18.95 2.126 2.217 2.126 0.787 4.154 5.748 7.469 ½ 0.669 0.827 1¾˝ 1-209-28-P-C 7 $18.95 2.126 2.217 2.126 0.787 4.154 5.748 7.469 ½ 0.669 0.827 1⅞˝ 1-210-30-P-C 8 $23.95 2.244 2.469 2.252 0.827 4.417 6.260 8.125 ⅝ 0.7810 0.866 115/16˝ 1-210-31-P-C 8 $23.95 2.244 2.469 2.252 0.827 4.417 6.260 8.125 ⅝ 0.7810 0.866 2˝ 1-210-32-P-C 8 $23.95 2.244 2.469 2.252 0.827 4.417 6.260 8.125 ⅝ 0.7810 0.866 2˝ 1-211-32-P-C 10 $28.95 2.362 2.807 2.500 0.866 4.902 6.772 8.625 ⅝ 0.7810 0.866 2⅛˝ 1-211-34-P-C 10 $28.95 2.362 2.807 2.500 0.866 4.902 6.772 8.625 ⅝ 0.7810 0.866 23/16˝ 1-211-35-P-C 10 $28.95 2.362 2.807 2.500 0.866 4.902 6.772 8.625 ⅝ 0.7810 0.866 2¼˝ 1-212-36-P-C 12 $36.95 2.598 3.059 2.752 0.945 5.394 7.323 9.500 ⅝ 0.7810 0.984 2⅜˝ 1-212-38-P-C 12 $36.95 2.598 3.059 2.752 0.945 5.394 7.323 9.500 ⅝ 0.7810 0.984 27/16˝ 1-212-39-P-C 12 $36.95 2.598 3.059 2.752 0.945 5.394 7.323 9.500 ⅝ 0.7810 0.984 2½˝ 1-213-40-P-C 16 $48.95 2.756 3.374 3.000 1.024 5.866 7.992 10.437 ¾ 1.000 1.188 2¾˝ 1-214-44-P-C 18 $57.95 2.835 3.374 3.126 1.063 6.102 8.268 10.472 ¾ 1.000 1.188 215/16˝ 1-215-47-P-C 19 $65.95 2.913 3.626 3.252 1.102 6.362 8.543 10.813 ¾ 1.000 1.188 3˝ 1-215-48-P-C 19 $65.95 2.913 3.626 3.252 1.102 6.362 8.543 10.813 ¾ 1.000 1.188

Pillow Block Bearings• Brand new 200 series normal duty pillowblock bearings. Cast iron construction withself-aligning ball bearing insert and greasezerk.

Flange Bearings• Brand new 200 series normal duty flangebearings. Cast iron construction with self-aligning ball bearing insert and greasezerk.

2 Bolt Flange Bearings

4 Bolt Flange Bearings

800-488-3407 Flange Bearings 99&

2 Bolt Flange Normal Duty 4 Bolt Flange Normal Duty

UCFL Series - Two Set Screws, No Lock Collar UCF Series - Two Set Screws, No Lock Collar Dimensions Dimensions

Bore ITEM Shpg. Price A A1 B H J L Bolt ITEM Shpg. Price A A1 B J L Bolt

½˝ 1-201-08-2 3 $8.95 1.004 0.433 1.312 2.362 3.543 4.449 ⅜ 1-201-08-4 3 $8.95 1.004 0.433 1.311 2.520 3.386 ⅜ ⅝˝ 1-202-10-2 3 $8.95 1.004 0.433 1.312 2.362 3.543 4.449 ⅜ 1-202-10-4 3 $8.95 1.004 0.433 1.311 2.520 3.386 ⅜ ¾˝ 1-204-12-2 3 $8.95 1.004 0.433 1.312 2.362 3.543 4.449 ⅜ 1-204-12-4 3 $8.95 1.004 0.433 1.311 2.520 3.386 ⅜ ⅞˝ 1-205-14-2 3 $8.95 1.063 0.512 1.405 2.677 3.898 5.118 7/16 1-205-14-4 4 $8.95 1.063 0.512 1.406 2.756 3.740 ⅜ 15/16˝ 1-205-15-2 3 $8.95 1.063 0.512 1.405 2.677 3.898 5.118 7/16 1-205-15-4 4 $8.95 1.063 0.512 1.406 2.756 3.740 ⅜ 1˝ 1-205-16-2 3 $8.95 1.063 0.512 1.405 2.677 3.898 5.118 7/16 1-205-16-4 4 $8.95 1.063 0.512 1.406 2.756 3.740 7/16 1⅛˝ 1-206-18-2 4 $11.95 1.221 0.512 1.583 3.150 4.606 5.827 7/16 1-206-18-4 4 $11.95 1.221 0.512 1.583 3.268 4.252 7/16 13/16˝ 1-206-19-2 4 $11.95 1.221 0.512 1.583 3.150 4.606 5.827 7/16 1-206-19-4 4 $11.95 1.221 0.512 1.583 3.268 4.252 7/16 1¼˝ 1-206-20-2 4 $11.95 1.221 0.512 1.583 3.150 4.606 5.827 7/16 1-206-20-4 4 $11.95 1.221 0.512 1.583 3.268 4.252 7/16 1¼˝ 1-207-20-2 5 $13.95 1.339 0.551 1.748 3.543 5.118 6.339 ½ 1-207-20-4 5 $13.95 1.339 0.591 1.748 3.622 4.606 7/16 15/16˝ 1-207-21-2 5 $13.95 1.339 0.551 1.748 3.543 5.118 6.339 ½ 1-207-21-4 5 $13.95 1.339 0.591 1.748 3.622 4.606 7/16 1⅜˝ 1-207-22-2 5 $13.95 1.339 0.551 1.748 3.543 5.118 6.339 ½ 1-207-22-4 5 $13.95 1.339 0.591 1.748 3.622 4.606 7/16 17/16˝ 1-207-23-2 5 $13.95 1.339 0.551 1.748 3.543 5.118 6.339 ½ 1-207-23-4 5 $13.95 1.339 0.591 1.748 3.622 4.606 7/16 1½˝ 1-208-24-2 6 $15.95 1.417 0.551 2.016 3.937 5.669 6.890 ½ 1-208-24-4 6 $15.95 1.417 0.591 2.016 4.016 5.118 ½ 1⅝˝ 1-209-26-2 7 $16.95 1.496 0.630 2.055 4.252 5.827 7.402 9/16 1-209-26-4 7 $16.95 1.496 0.630 2.055 4.134 5.394 9/16 111/16˝ 1-209-27-2 7 $16.95 1.496 0.630 2.055 4.252 5.827 7.402 9/16 1-209-27-4 7 $16.95 1.496 0.630 2.055 4.134 5.394 9/16 1¾˝ 1-209-28-2 7 $16.95 1.496 0.630 2.055 4.252 5.827 7.402 9/16 1-209-28-4 7 $16.95 1.496 0.630 2.055 4.134 5.394 9/16 1⅞˝ 1-210-30-2 8 $19.95 1.575 0.630 2.150 4.528 6.181 7.756 9/16 1-210-30-4 7 $19.95 1.575 0.630 2.150 4.370 5.630 9/16 115/16˝ 1-210-31-2 8 $19.95 1.575 0.630 2.150 4.528 6.181 7.756 9/16 1-210-31-4 7 $19.95 1.575 0.630 2.150 4.370 5.630 9/16 2˝ 1-210-32-2 8 $19.95 1.575 0.630 2.150 4.528 6.181 7.756 9/16 1-210-32-4 7 $19.95 1.575 0.630 2.150 4.370 5.630 9/16 2˝ 1-211-32-2 9 $23.95 1.693 0.709 2.299 5.118 7.244 8.819 ⅝ 1-211-32-4 9 $23.95 1.693 0.709 2.299 5.118 6.378 ⅝ 2⅛˝ 1-211-34-2 9 $23.95 1.693 0.709 2.299 5.118 7.244 8.819 ⅝ 1-211-34-4 9 $23.95 1.693 0.709 2.299 5.118 6.378 ⅝ 23/16˝ 1-211-35-2 9 $23.95 1.693 0.709 2.299 5.118 7.244 8.819 ⅝ 1-211-35-4 9 $23.95 1.693 0.709 2.299 5.118 6.378 ⅝ 2¼˝ 1-212-36-2 12 $29.95 1.890 0.709 2.704 5.512 7.953 9.843 ⅝ 1-212-36-4 11 $29.95 1.890 0.709 2.705 5.630 6.890 ⅝ 2⅜˝ 1-212-38-2 12 $29.95 1.890 0.709 2.704 5.512 7.953 9.843 ⅝ 1-212-38-4 11 $29.95 1.890 0.709 2.705 5.630 6.890 ⅝ 27/16˝ 1-212-39-2 12 $29.95 1.890 0.709 2.704 5.512 7.953 9.843 ⅝ 1-212-39-4 11 $29.95 1.890 0.709 2.705 5.630 6.890 ⅝ 2½˝ 1-213-40-2 15 $38.95 1.969 0.787 2.744 6.102 8.268 10.158 ¾ 1-213-40-4 13 $38.95 1.969 0.866 2.744 5.866 7.362 ⅝ 2¾˝ 1-214-44-2 17 $49.95 2.126 0.787 2.968 6.299 8.504 10.433 ¾ 1-214-44-4 15 $49.95 2.126 0.866 2.969 5.984 7.598 11/16 215/16˝ 1-215-47-2 18 $56.95 2.205 0.787 3.093 6.496 8.858 10.827 ¾ 1-215-47-4 17 $56.95 2.205 0.866 3.091 6.260 7.874 11/16 3˝ 1-215-48-2 18 $56.95 2.205 0.787 3.093 6.496 8.858 10.827 ¾ 1-215-48-4 17 $56.95 2.205 0.866 3.091 6.260 7.874 11/16

HCFT Series - Eccentric Locking Collar w/Set Screws HCFS Series - Eccentric Locking Collar w/Set Screws Dimensions Dimensions

Bore ITEM Shpg. Price A A1 B H J L Bolt ITEM Shpg. Price A A1 B J L Bolt

½˝ N/A – – – – – – – – – 1-201-8-4-C 3 $9.95 1.161 0.591 1.791 2.500 3.386 ⅜ ⅝˝ N/A – – – – – – – – – 1-202-10-4-C 3 $9.95 1.161 0.591 1.791 2.500 3.386 ⅜ ¾˝ 1-204-12-2-C 3 $9.95 1.161 0.591 1.791 1.000 3.543 4.429 ⅜ 1-204-12-4-C 3 $9.95 1.161 0.591 1.791 2.500 3.386 ⅜ ⅞˝ 1-205-14-2-C 3 $9.95 1.181 0.591 1.807 2.756 3.898 4.843 7/16 1-205-14-4-C 4 $9.95 1.181 0.591 1.807 2.756 3.661 ⅜ 15/16˝ 1-205-15-2-C 3 $9.95 1.181 0.591 1.807 2.756 3.898 4.843 7/16 1-205-15-4-C 4 $9.95 1.181 0.591 1.807 2.756 3.661 ⅜ 1˝ 1-205-16-2-C 3 $9.95 1.181 0.591 1.807 2.756 3.898 4.843 7/16 1-205-16-4-C 4 $9.95 1.181 0.591 1.807 2.756 3.661 ⅜ 1⅛˝ 1-206-18-2-C 4 $12.95 1.280 0.630 1.972 3.228 4.587 5.591 7/16 1-206-18-4-C 4 $12.95 1.280 0.630 1.972 3.248 4.173 7/16 13/16˝ 1-206-19-2-C 4 $12.95 1.280 0.630 1.972 3.228 4.587 5.591 7/16 1-206-19-4-C 4 $12.95 1.280 0.630 1.972 3.248 4.173 7/16 1¼˝ 1-206-20-2-C 4 $12.95 1.280 0.630 1.972 3.228 4.587 5.591 7/16 1-206-20-4-C 4 $12.95 1.280 0.630 1.972 3.248 4.173 7/16 1¼˝ 1-207-20-2-C 5 $14.95 1.417 0.669 2.098 3.701 5.118 6.221 ½ 1-207-20-4-C 5 $14.95 1.378 0.669 2.098 3.622 4.567 7/16 15/16˝ 1-207-21-2-C 5 $14.95 1.417 0.669 2.098 3.701 5.118 6.221 ½ 1-207-21-4-C 5 $14.95 1.378 0.669 2.098 3.622 4.567 7/16 1⅜˝ 1-207-22-2-C 5 $14.95 1.417 0.669 2.098 3.701 5.118 6.221 ½ 1-207-22-4-C 5 $14.95 1.378 0.669 2.098 3.622 4.567 7/16 17/16˝ 1-207-23-2-C 5 $14.95 1.417 0.669 2.098 3.701 5.118 6.221 ½ 1-207-23-4-C 5 $14.95 1.378 0.669 2.098 3.622 4.567 7/16 1½˝ 1-208-24-2-C 6 $16.95 1.535 0.669 2.319 4.055 5.650 6.772 ½ 1-208-24-4-C 6 $16.95 1.535 0.669 2.319 3.996 5.079 ½ 1⅝˝ 1-209-26-2-C 7 $17.95 1.575 0.709 2.319 4.252 5.847 7.087 9/16 1-209-26-4-C 7 $17.95 1.575 0.709 2.319 4.134 5.315 9/16 111/16˝ 1-209-27-2-C 7 $17.95 1.575 0.709 2.319 4.252 5.847 7.087 9/16 1-209-27-4-C 7 $17.95 1.575 0.709 2.319 4.134 5.315 9/16 1¾˝ 1-209-28-2-C 7 $17.95 1.575 0.709 2.319 4.252 5.847 7.087 9/16 1-209-28-4-C 7 $17.95 1.575 0.709 2.319 4.134 5.315 9/16 1⅞˝ 1-210-30-2-C 8 $21.95 1.772 0.787 2.602 4.488 6.181 7.480 9/16 1-210-30-4-C 8 $21.95 1.772 0.787 2.602 4.370 5.630 9/16 115/16˝ 1-210-31-2-C 8 $21.95 1.772 0.787 2.602 4.488 6.181 7.480 9/16 1-210-31-4-C 8 $21.95 1.772 0.787 2.602 4.370 5.630 9/16 2˝ 1-210-32-2-C 8 $21.95 1.772 0.787 2.602 4.488 6.181 7.480 9/16 1-210-32-4-C 8 $21.95 1.772 0.787 2.602 4.370 5.630 9/16 2˝ 1-211-32-2-C 9 $28.95 1.890 0.827 2.937 5.039 7.244 8.543 ⅝ 1-211-32-4-C 10 $28.95 1.929 0.827 2.937 5.118 6.378 ⅝ 2⅛˝ 1-211-34-2-C 9 $28.95 1.890 0.827 2.937 5.039 7.244 8.543 ⅝ 1-211-34-4-C 10 $28.95 1.929 0.827 2.937 5.118 6.378 ⅝ 23/16˝ 1-211-35-2-C 9 $28.95 1.890 0.827 2.937 5.039 7.244 8.543 ⅝ 1-211-35-4-C 10 $28.95 1.929 0.827 2.937 5.118 6.378 ⅝ 2¼˝ 1-212-36-2-C 12 $34.95 2.087 0.827 3.181 5.433 7.953 9.331 ⅝ 1-212-36-4-C 12 $34.95 2.106 0.866 3.181 5.630 6.890 ⅝ 2⅜˝ 1-212-38-2-C 12 $34.95 2.087 0.827 3.181 5.433 7.953 9.331 ⅝ 1-212-38-4-C 12 $34.95 2.106 0.866 3.181 5.630 6.890 ⅝ 27/16˝ 1-212-39-2-C 12 $34.95 2.087 0.827 3.181 5.433 7.953 9.331 ⅝ 1-212-39-4-C 12 $34.95 2.106 0.866 3.181 5.630 6.890 ⅝ 2½˝ N/A – – – – – – – – – 1-213-40-4-C 15 $47.95 2.284 0.866 3.528 5.866 7.244 ⅝ 2¾˝ N/A – – – – – – – – – 1-214-44-4-C 16 $57.95 2.362 0.906 3.528 5.984 7.402 ⅝ 215/16˝ N/A – – – – – – – – – 1-215-47-4-C 18 $61.95 2.441 0.945 3.772 6.000 7.874 ⅝ 3˝ N/A – – – – – – – – – 1-215-48-4-C 18 $61.95 2.441 0.945 3.772 6.000 7.874 ⅝

100 2 Bolt, 4 Bolt & Pillow Block Bearings www.surpluscenter.com8

1⅛˝ Flush MountFlangeBearingITEM 1-3317$3.99• New, Lutco FLMX bearing. Flush mount,pre-lubricated ball bearing pressed intosteel housing. Not self-aligning. Does notlock to shaft.SPECIFICATIONS • Mounting holes• Bore 1⅛˝ ¼˝ dia. 2⅝˝ B.C.• Bore thru-lgth. ¾˝ • Size 3¼˝ dia. x ¾˝• Mount 3 hole flush mount • Shpg. ½ lb.

2 Bolt FlangeBearingWith SquareMounting Holes

ITEM 1-207-20-2-SQ $8.95SPECIFICATIONS • Mount two holes on• Bore 1¼˝ 315/16˝ centers• Bore thru-length 1½˝ • Mounting holes 0.4˝ sq.• Bearing # SB207-20 • Size 413/16˝ x 39/16˝ x 19/16˝• Housing # PFTD207 • Shpg. 5 lbs.

5/16˝ Bore FlangeBearingITEM 1-3094$1.99• New, light duty bearing in plastic hous-ing. Rubber shaft seal on external side ofhousing.SPECIFICATIONS• Bore 5/16˝ • Mounting ctrs. 1½˝• Thru-lgth. 17/32˝ • Bolt holes 0.2˝ dia.• Flange outer width 21/16˝ • Shpg. ¼ lb.

8mm 2 Bolt FlangeBearing

ITEM 1-3151$1.99• New NSK 608D1 ball bearing in plastictwo hole mount.SPECIFICATIONS • Mount 1½˝ c-c• Bore 8mm • Mounting holes 5mm• Length thru bearing 7mm • Size 2⅛˝ x 15/16˝ x 21/32˝• Length thru housing 21/32” • Shpg. ½ lb.

⅝˝ FlangeBushing

ITEM 1-241995¢• New, self-aligning, bronze bushing.SPECIFICATIONS • Two ¼˝ diam. mounting• ⅝˝ I.D. holes on 1¾˝ centers• 7/16˝ bore depth • Shpg. 1/10 lb.

Surplus Bearings• New bearings of mixed manufacturers.Cast iron housing with self-aligning ballbearing insert. All bearings except eccen-tric lock collar types include set screw onthe inner race to lock shaft. Items with ec-centric locking collar have set screw in thecollar.

2 Bolt FlangeBearingsSet Screw, No Lock Collar ITEM Bore Shpg. Price1-207-20-2-S 1¼˝ 5 lbs. $9.951-207-23-2-S 17/16˝ 5 lbs. $9.951-209-27-2-S 111/16˝ 7 lbs. $5.951-215-47-2-S 215/16˝ 18 lbs. $9.95Eccentric Locking Collar w/ Set Screw ITEM Bore Shpg. Price 1-205-14-2-C-S ⅞˝ 3 lbs. $3.501-2142-C 1¼˝ 4 lbs. $9.951-1814-C 15/16˝ 4 lbs. $10.951-207-23-2-C-S 17/16˝ 5 lbs. $4.951-210-31-2-C-S 115/16˝ 8 lbs. $7.501-211-35-2-C-S 23/16˝ 9 lbs. $7.951-212-39-2-C-S 27/16˝ 11 lbs. $8.951-215-47-2-C-S 215/16˝ 18 lbs. $9.95

4 Bolt FlangeBearings

Set Screw, No Lock Collar ITEM Bore Shpg. Price1-206-19-4-S 13/16˝ 3 lbs. $8.951-2774 13/16˝ 4 lbs. $8.95Eccentric Locking Collar w/ Set Screw ITEM Bore Shpg. Price1-2196 50 mm 9 lbs. $9.951-211-35-4-C-S 23/16˝ 9 lbs. $7.95

Pillow BlockBearings

Set Screw, No Lock Collar ITEM Bore Shpg. Price1-206-30MM-P 30 mm 4 lbs. $8.951-215-47-P-S 215/16˝ 19 lbs. $9.95Eccentric Locking Collar w/ Set Screw ITEM Bore Shpg. Price1-215-47-P-C-S 215/16˝ 19 lbs. $9.95

Ball Bearings

• New. Ball bearings with two set screws.Use in pillow block or flange housing (not included).

ITEM Bore Housing Bore thru-lgth. Shpg. Price 1-205-25MM-B 25 mm UC205 34 mm (1.34˝) 1 lb. $5.95 1-207-35MM-B 35 mm UC207 43 mm (1.69˝) 2 lbs. $7.95 1-209-45MM-B 45 mm UC209 48 mm (1.89˝) 2 lbs. $9.95 1-205-16-B 1˝ UC205 1.34˝ 1 lb. $5.45 1-206-18-B 1⅛˝ UC206 1½˝ 1 lb. $6.95 1-206-18-BC * 1⅛˝ UC206 1.90˝ 1 lb. $4.95 1-206-19-B 13/16˝ UC206 1½˝ 1 lb. $6.95 1-207-22-B 1⅜˝ UC207 1.69˝ 1½ lbs. $9.05 1-208-24-B 1½˝ UC208 1.94˝ 3 lbs. $11.95 1-209-27-B 111/16˝ UC209 115/16˝ 2 lbs. $9.95 1-215-47-B 215/16˝ UC215 31/16˝ 6 lbs. $10.75* Eccentric locking collar

FlangeBearings

• Brand new. Two boltstamped steel housingwith sealed self aligning ball bearing. Innerrace with 2 set screws.

ITEM 1-3031 $6.95• ½˝ bore, 2½˝ bolt centers, uses ¼˝ bolts.Shpg. ½ lb.

ITEM 1-1869 $8.70• ⅝˝ bore, 2½˝ bolt centers, uses ¼˝ bolts.Shpg. ½ lb.

ITEM 1-2386 $8.95• ¾˝ bore, 213/16˝ bolt centers, uses 5/16˝bolts. Shpg. ½ lb.

ITEM 1-2387 $9.20• 1˝ bore, 2.992˝ bolt centers, uses 5/16˝bolts. Shpg. 1 lb.

ITEM 1-2388 $9.50• 1¼˝ bore, 39/16˝ bolt centers, uses ⅜˝bolts. Shpg. 1 lb.

1˝ BearingWith LockCollar

ITEM 1-3583$3.95• New, Model CSA205-16 ball bearing withlock collar.SPECIFICATIONS• Bore 1˝ • Housing 205• Length thru bore • Set screws 1w/out lock collar 0.85˝ • O.D. 52mm (2.0472˝)w/ lock collar 1.23˝ • Shpg. ¼ lb.

2.5˝ SphericalBearing

ITEM 1-3729$29.95• New, RBC Model BH4044LSS high mis-alignment heavy duty spherical bearing.Use for hydraulic cylinders with proper sizeend fittings. Includes 2 snap rings to lockin place.SPECIFICATIONS • Load limits• Bore 2.5˝ Static radial 285,000 (lbf)• Inner ring width 2.545˝ Static thrust 62,600 (lbf)• Spherical dia. 3.95˝ Dynamic radial 71,200 (lbf)• Outer ring width 2.062˝ • Shpg. 7 lbs.

800-488-3407 Right Angle Shaft-to-Shaft Gear Reducers 101&

Shaft to Shaft Gearboxes

• Brand new, WORLDWIDE ELECTRIC right-angle wormgear reducers. Cast iron housing. Four tapped mountingholes on top and bottom of case. Rated for 1750 RPMmaximum input speed. Shipped filled with oil. Mountingbases sold separately, available on our website.

Right Output Left Output

5

10

15

20

30

40

50

60

ITEM Number ITEM Number Output in. lbs. Overhung 4 Bolt Mount Ratio Left Output Right Output HP RPM Torque Load Input Shaft Output Shaft Centers Shpg. Price 13-133-5-L 13-133-5-R 1.15 350 209 190 ½˝ dia. x 15/16˝ keyed ⅝˝ dia. x 2˝ keyed 3¼˝ x 2˝ 15 $ 92.95 13-175-5-L 13-175-5-R 2.83 350 499 228 ⅝˝ dia. x 19/16˝ keyed ⅞˝ dia. x 125/32˝ keyed 43/16˝ x 2¾˝ 23 $111.95 13-206-5-L 13-206-5-R 3.62 350 925 238 ⅝˝ dia. x 19/16˝ keyed 1˝ dia. x 23/32˝ keyed 5˝ x 2⅞˝ 28 $133.95 13-237-5-L 13-237-5-R 4.32 350 766 316 ¾˝ dia. x 2˝ keyed 1⅛˝ dia. x 2⅜˝ keyed 5˝ x 2⅞˝ 37 $153.95 13-262-5-L 13-262-5-R 5.24 350 924 333 ¾˝ dia. x 2˝ keyed 1⅛˝ dia. x 2⅝˝ keyed 6⅜˝ x 3⅜˝ 51 $188.95 13-325-5-L 13-325-5-R 9.72 350 1724 302 ⅞˝ dia. x 27/16˝ keyed 1⅜˝ dia. x 3¼˝ keyed 7½˝ x 4˝ 82 $265.95 13-133-10-L 13-133-10-R 0.77 175 247 220 ½˝ dia. x 15/16˝ keyed ⅝˝ dia. x 2˝ keyed 3¼˝ x 2˝ 15 $ 92.95 13-175-10-L 13-175-10-R 1.57 175 515 272 ⅝˝ dia. x 19/16˝ keyed ⅞˝ dia. x 125/32˝ keyed 43/16˝ x 2¾˝ 23 $111.95 13-206-10-L 13-206-10-R 2.77 175 935 283 ⅝˝ dia. x 19/16˝ keyed 1˝ dia. x 23/32˝ keyed 5˝ x 2⅞˝ 28 $133.95 13-237-10-L 13-237-10-R 3.47 175 1158 378 ¾˝ dia. x 2˝ keyed 1⅛˝ dia. x 2⅜˝ keyed 5˝ x 2⅞˝ 37 $153.95 13-262-10-L 13-262-10-R 4.17 175 1445 398 ¾˝ dia. x 2˝ keyed 1⅛˝ dia. x 2⅝˝ keyed 6⅜˝ x 3⅜˝ 51 $188.95 13-325-10-L 13-325-10-R 7.19 175 2419 369 ⅞˝ dia. x 27/16˝ keyed 1⅜˝ dia. x 3¼˝ keyed 7½˝ x 4˝ 82 $265.95 13-133-15-L 13-133-15-R 0.63 120 283 254 ½˝ dia. x 15/16˝ keyed ⅝˝ dia. x 2˝ keyed 3¼˝ x 2˝ 15 $ 92.95 13-175-15-L 13-175-15-R 1.24 120 554 324 ⅝˝ dia. x 19/16˝ keyed ⅞˝ dia. x 125/32˝ keyed 43/16˝ x 2¾˝ 23 $111.95 13-206-15-L 13-206-15-R 2.09 120 1002 337 ⅝˝ dia. x 19/16˝ keyed 1˝ dia. x 23/32˝ keyed 5˝ x 2⅞˝ 28 $133.95 13-237-15-L 13-237-15-R 2.64 120 1249 451 ¾˝ dia. x 2˝ keyed 1⅛˝ dia. x 2⅜˝ keyed 5˝ x 2⅞˝ 37 $153.95 13-262-15-L 13-262-15-R 3.22 120 1577 475 ¾˝ dia. x 2˝ keyed 1⅛˝ dia. x 2⅝˝ keyed 6⅜˝ x 3⅜˝ 51 $188.95 13-325-15-L 13-325-15-R 5.45 120 2611 450 ⅞˝ dia. x 27/16˝ keyed 1⅜˝ dia. x 3¼˝ keyed 7½˝ x 4˝ 82 $265.95 13-133-20-L 13-133-20-R 0.50 88 276 254 ½˝ dia. x 15/16˝ keyed ⅝˝ dia. x 2˝ keyed 3¼˝ x 2˝ 15 $ 92.95 13-175-20-L 13-175-20-R 1.26 88 737 378 ⅝˝ dia. x 19/16˝ keyed ⅞˝ dia. x 125/32˝ keyed 43/16˝ x 2¾˝ 23 $111.95 13-206-20-L 13-206-20-R 1.57 88 914 394 ⅝˝ dia. x 19/16˝ keyed 1˝ dia. x 23/32˝ keyed 5˝ x 2⅞˝ 28 $133.95 13-237-20-L 13-237-20-R 2.06 88 1195 530 ¾˝ dia. x 2˝ keyed 1⅛˝ dia. x 2⅜˝ keyed 5˝ x 2⅞˝ 37 $153.95 13-262-20-L 13-262-20-R 2.67 88 1563 558 ¾˝ dia. x 2˝ keyed 1⅛˝ dia. x 2⅝˝ keyed 6⅜˝ x 3⅜˝ 51 $188.95 13-325-20-L 13-325-20-R 4.74 88 2875 526 ⅞˝ dia. x 27/16˝ keyed 1⅜˝ dia. x 3¼˝ keyed 7½˝ x 4˝ 82 $265.95 13-133-30-L 13-133-30-R 0.47 58 336 254 ½˝ dia. x 15/16˝ keyed ⅝˝ dia. x 2˝ keyed 3¼˝ x 2˝ 15 $ 92.95 13-175-30-L 13-175-30-R 0.89 58 666 419 ⅝˝ dia. x 19/16˝ keyed ⅞˝ dia. x 125/32˝ keyed 43/16˝ x 2¾˝ 23 $111.95 13-206-30-L 13-206-30-R 1.65 58 1310 436 ⅝˝ dia. x 19/16˝ keyed 1˝ dia. x 23/32˝ keyed 5˝ x 2⅞˝ 28 $133.95 13-237-30-L 13-237-30-R 1.82 58 1507 581 ¾˝ dia. x 2˝ keyed 1⅛˝ dia. x 2⅜˝ keyed 5˝ x 2⅞˝ 37 $153.95 13-262-30-L 13-262-30-R 2.22 58 1827 612 ¾˝ dia. x 2˝ keyed 1⅛˝ dia. x 2⅝˝ keyed 6⅜˝ x 3⅜˝ 51 $188.95 13-325-30-L 13-325-30-R 3.66 58 3045 585 ⅞˝ dia. x 27/16˝ keyed 1⅜˝ dia. x 3¼˝ keyed 7½˝ x 4˝ 82 $265.95 13-133-40-L 13-133-40-R 0.38 44 356 254 ½˝ dia. x 15/16˝ keyed ⅝˝ dia. x 2˝ keyed 3¼˝ x 2˝ 15 $ 92.95 13-175-40-L 13-175-40-R 0.79 44 714 495 ⅝˝ dia. x 19/16˝ keyed ⅞˝ dia. x 125/32˝ keyed 43/16˝ x 2¾˝ 23 $111.95 13-206-40-L 13-206-40-R 1.09 44 1120 515 ⅝˝ dia. x 19/16˝ keyed 1˝ dia. x 23/32˝ keyed 5˝ x 2⅞˝ 28 $133.95 13-237-40-L 13-237-40-R 1.45 44 1483 684 ¾˝ dia. x 2˝ keyed 1⅛˝ dia. x 2⅜˝ keyed 5˝ x 2⅞˝ 37 $153.95 13-262-40-L 13-262-40-R 1.85 44 1919 720 ¾˝ dia. x 2˝ keyed 1⅛˝ dia. x 2⅝˝ keyed 6⅜˝ x 3⅜˝ 51 $188.95 13-325-40-L 13-325-40-R 3.35 44 3692 697 ⅞˝ dia. x 27/16˝ keyed 1⅜˝ dia. x 3¼˝ keyed 7½˝ x 4˝ 82 $265.95 13-133-50-L 13-133-50-R 0.29 35 312 254 ½˝ dia. x 15/16˝ keyed ⅝˝ dia. x 2˝ keyed 3¼˝ x 2˝ 15 $ 92.95 13-175-50-L 13-175-50-R 0.50 35 538 564 ⅝˝ dia. x 19/16˝ keyed ⅞˝ dia. x 125/32˝ keyed 43/16˝ x 2¾˝ 23 $111.95 13-206-50-L 13-206-50-R 0.74 35 830 587 ⅝˝ dia. x 19/16˝ keyed 1˝ dia. x 23/32˝ keyed 5˝ x 2⅞˝ 28 $133.95 13-237-50-L 13-237-50-R 1.32 35 1527 763 ¾˝ dia. x 2˝ keyed 1⅛˝ dia. x 2⅜˝ keyed 5˝ x 2⅞˝ 37 $153.95 13-262-50-L 13-262-50-R 1.37 35 1658 803 ¾˝ dia. x 2˝ keyed 1⅛˝ dia. x 2⅝˝ keyed 6⅜˝ x 3⅜˝ 51 $188.95 13-325-50-L 13-325-50-R 2.49 35 3413 803 ⅞˝ dia. x 27/16˝ keyed 1⅜˝ dia. x 3¼˝ keyed 7½˝ x 4˝ 82 $265.95 13-133-60-L 13-133-60-R 0.23 29 158 254 ½˝ dia. x 15/16˝ keyed ⅝˝ dia. x 2˝ keyed 3¼˝ x 2˝ 15 $ 92.95 13-175-60-L 13-175-60-R 0.38 29 433 613 ⅝˝ dia. x 19/16˝ keyed ⅞˝ dia. x 125/32˝ keyed 43/16˝ x 2¾˝ 23 $111.95 13-206-60-L 13-206-60-R 0.60 29 750 639 ⅝˝ dia. x 19/16˝ keyed 1˝ dia. x 23/32˝ keyed 5˝ x 2⅞˝ 28 $133.95 13-237-60-L 13-237-60-R 0.86 29 1149 838 ¾˝ dia. x 2˝ keyed 1⅛˝ dia. x 2⅜˝ keyed 5˝ x 2⅞˝ 37 $153.95 13-262-60-L 13-262-60-R 1.16 29 1670 882 ¾˝ dia. x 2˝ keyed 1⅛˝ dia. x 2⅝˝ keyed 6⅜˝ x 3⅜˝ 51 $188.95 13-325-60-L 13-325-60-R 2.03 29 3127 882 ⅞˝ dia. x 27/16˝ keyed 1⅜˝ dia. x 3¼˝ keyed 7½˝ x 4˝ 82 $265.95

5

10

15

20

30

40

50

60

Left Output Right Output Dual Output Hollow Output Output Output Overhung Output 4 Bolt Mnt Ratio ITEM Number ITEM Number ITEM Number Price ITEM Number Price HP RPM Torque Load Input Bore Left, Right, Dual Hollow Bore Centers Shpg. 13-133-5-L-56C 13-133-5-R-56C 13-133-5-DE-56C $107.95 N/A 1.15 350 209 190 ⅝˝ keyed ⅝˝ dia. x 2˝ keyed — 3¼˝ x 2˝ 20 13-175-5-L-56C 13-175-5-R-56C 13-175-5-DE-56C $130.95 13-175-5-H-56C $164.95 2.83 350 499 228 ⅝˝ keyed ⅞˝ dia. x 115/16˝ keyed 1˝ dia. x 63/16˝ keyed 43/16˝ x 2¾˝ 30 13-206-5-L-56C 13-206-5-R-56C 13-206-5-DE-56C $165.95 13-206-5-H-56C $199.95 3.62 350 925 238 ⅝˝ keyed 1˝ dia. x 23/32˝ keyed 1⅛˝ dia. x 67/16˝ keyed 5˝ x 2⅞˝ 35 13-237-5-L-56C 13-237-5-R-56C 13-237-5-DE-56C $198.95 13-237-5-H-56C $229.95 4.32 350 766 316 ⅝˝ keyed 1⅛˝ dia. x 2⅜˝ keyed 1¼˝ dia. x 67/16˝ keyed 5˝ x 2⅞˝ 41 13-262-5-L-182TC 13-262-5-R-182TC 13-262-5-DE-182TC $214.95 13-262-5-H-182TC $279.95 5.24 350 924 333 1⅛˝ keyed 1⅛˝ dia. x 2⅝˝ keyed 17/16˝ dia. x 7˝ keyed 6⅜˝ x 3⅜˝ 56 13-325-5-L-184TC 13-325-5-R-184TC 13-325-5-DE-184TC $302.95 13-325-5-H-184TC $389.95 9.72 350 1724 302 1⅛˝ keyed 1⅜˝ dia. x 3¼˝ keyed 115/16˝ dia. x 8¾˝ keyed 7½˝ x 4˝ 93 13-133-10-L-56C 13-133-10-R-56C 13-133-10-DE-56C $107.95 N/A 0.77 175 247 220 ⅝˝ keyed ⅝˝ dia. x 2˝ keyed — 3¼˝ x 2˝ 20 13-175-10-L-56C 13-175-10-R-56C 13-175-10-DE-56C $130.95 13-175-10-H-56C $164.95 1.57 175 515 272 ⅝˝ keyed ⅞˝ dia. x 115/16˝ keyed 1˝ dia. x 63/16˝ keyed 43/16˝ x 2¾˝ 30 13-206-10-L-56C 13-206-10-R-56C 13-206-10-DE-56C $165.95 13-206-10-H-56C $199.95 2.77 175 935 283 ⅝˝ keyed 1˝ dia. x 23/32˝ keyed 1⅛˝ dia. x 67/16˝ keyed 5˝ x 2⅞˝ 35 13-237-10-L-56C 13-237-10-R-56C 13-237-10-DE-56C $198.95 13-237-10-H-56C $229.95 3.47 175 1158 378 ⅝˝ keyed 1⅛˝ dia. x 2⅜˝ keyed 1¼˝ dia. x 67/16˝ keyed 5˝ x 2⅞˝ 41 13-262-10-L-182TC 13-262-10-R-182TC 13-262-10-DE-182TC $214.95 13-262-10-H-182TC $279.95 4.17 175 1445 398 1⅛˝ keyed 1⅛˝ dia. x 2⅝˝ keyed 17/16˝ dia. x 7˝ keyed 6⅜˝ x 3⅜˝ 56 13-325-10-L-184TC 13-325-10-R-184TC 13-325-10-DE-184TC $302.95 13-325-10-H-184TC $389.95 7.19 175 2419 369 1⅛˝ keyed 1⅜˝ dia. x 3¼˝ keyed 115/16˝ dia. x 8¾˝ keyed 7½˝ x 4˝ 93 13-133-15-L-56C 13-133-15-R-56C 13-133-15-DE-56C $107.95 N/A 0.63 120 283 254 ⅝˝ keyed ⅝˝ dia. x 2˝ keyed — 3¼˝ x 2˝ 20 13-175-15-L-56C 13-175-15-R-56C 13-175-15-DE-56C $130.95 13-175-15-H-56C $164.95 1.57 120 554 324 ⅝˝ keyed ⅞˝ dia. x 115/16˝ keyed 1˝ dia. x 63/16˝ keyed 43/16˝ x 2¾˝ 30 13-206-15-L-56C 13-206-15-R-56C 13-206-15-DE-56C $165.95 13-206-15-H-56C $199.95 2.09 120 1002 337 ⅝˝ keyed 1˝ dia. x 23/32˝ keyed 1⅛˝ dia. x 67/16˝ keyed 5˝ x 2⅞˝ 35 13-237-15-L-56C 13-237-15-R-56C 13-237-15-DE-56C $198.95 13-237-15-H-56C $229.95 2.64 120 1249 451 ⅝˝ keyed 1⅛˝ dia. x 2⅜˝ keyed 1¼˝ dia. x 67/16˝ keyed 5˝ x 2⅞˝ 41 13-262-15-L-56C 13-262-15-R-56C 13-262-15-DE-56C $214.95 13-262-15-H-56C $279.95 3.22 120 1577 475 ⅝˝ keyed 1⅛˝ dia. x 2⅝˝ keyed 17/16˝ dia. x 7˝ keyed 6⅜˝ x 3⅜˝ 56 13-262-15-L-145TC 13-262-15-R-145TC 13-262-15-DE-145TC $214.95 13-262-15-H-145TC $279.95 3.22 120 1577 475 ⅞˝ keyed 1⅛˝ dia. x 2⅝˝ keyed 17/16˝ dia. x 7˝ keyed 6⅜˝ x 3⅜˝ 56 13-325-15-L-182TC 13-325-15-R-182TC 13-325-15-DE-182TC $302.95 13-325-15-H-182TC $389.95 5.45 120 2611 450 1⅛˝ keyed 1⅜˝ dia. x 3¼˝ keyed 115/16˝ dia. x 8¾˝ keyed 7½˝ x 4˝ 93 13-133-20-L-56C 13-133-20-R-56C 13-133-20-DE-56C $107.95 N/A 0.50 88 276 254 ⅝˝ keyed ⅝˝ dia. x 2˝ keyed — 3¼˝ x 2˝ 20 13-175-20-L-56C 13-175-20-R-56C 13-175-20-DE-56C $130.95 13-175-20-H-56C $164.95 1.26 88 737 378 ⅝˝ keyed ⅞˝ dia. x 115/16˝ keyed 1˝ dia. x 63/16˝ keyed 43/16˝ x 2¾˝ 30 13-206-20-L-56C 13-206-20-R-56C 13-206-20-DE-56C $165.95 13-206-20-H-56C $199.95 1.57 88 914 394 ⅝˝ keyed 1˝ dia. x 23/32˝ keyed 1⅛˝ dia. x 67/16˝ keyed 5˝ x 2⅞˝ 35 13-237-20-L-56C 13-237-20-R-56C 13-237-20-DE-56C $198.95 13-237-20-H-56C $229.95 2.06 88 1195 530 ⅝˝ keyed 1⅛˝ dia. x 2⅜˝ keyed 1¼˝ dia. x 67/16˝ keyed 5˝ x 2⅞˝ 41 13-262-20-L-56C 13-262-20-R-56C 13-262-20-DE-56C $214.95 13-262-20-H-56C $279.95 2.67 88 1563 558 ⅝˝ keyed 1⅛˝ dia. x 2⅝˝ keyed 17/16˝ dia. x 7˝ keyed 6⅜˝ x 3⅜˝ 56 13-262-20-L-145TC 13-262-20-R-145TC 13-262-20-DE-145TC $214.95 13-262-20-H-145TC $279.95 2.67 88 1563 558 ⅞˝ keyed 1⅛˝ dia. x 2⅝˝ keyed 17/16˝ dia. x 7˝ keyed 6⅜˝ x 3⅜˝ 56 13-325-20-L-182TC 13-325-20-R-182TC 13-325-20-DE-182TC $302.95 13-325-20-H-182TC $389.95 4.74 88 2875 526 1⅛˝ keyed 1⅜˝ dia. x 3¼˝ keyed 115/16˝ dia. x 8¾˝ keyed 7½˝ x 4˝ 93 13-133-30-L-56C 13-133-30-R-56C 13-133-30-DE-56C $107.95 N/A 0.47 58 336 254 ⅝˝ keyed ⅝˝ dia. x 2˝ keyed — 3¼˝ x 2˝ 20 13-175-30-L-56C 13-175-30-R-56C 13-175-30-DE-56C $130.95 13-175-30-H-56C $164.95 0.89 58 666 419 ⅝˝ keyed ⅞˝ dia. x 115/16˝ keyed 1˝ dia. x 63/16˝ keyed 43/16˝ x 2¾˝ 30 13-206-30-L-56C 13-206-30-R-56C 13-206-30-DE-56C $165.95 13-206-30-H-56C $199.95 1.65 58 1310 436 ⅝˝ keyed 1˝ dia. x 23/32˝ keyed 1⅛˝ dia. x 67/16˝ keyed 5˝ x 2⅞˝ 35 13-237-30-L-56C 13-237-30-R-56C 13-237-30-DE-56C $198.95 13-237-30-H-56C $229.95 1.82 58 1507 581 ⅝˝ keyed 1⅛˝ dia. x 2⅜˝ keyed 1¼˝ dia. x 67/16˝ keyed 5˝ x 2⅞˝ 41 13-262-30-L-56C 13-262-30-R-56C 13-262-30-DE-56C $214.95 13-262-30-H-56C $279.95 2.22 58 1827 612 ⅝˝ keyed 1⅛˝ dia. x 2⅝˝ keyed 17/16˝ dia. x 7˝ keyed 6⅜˝ x 3⅜˝ 53 13-262-30-L-145TC 13-262-30-R-145TC 13-262-30-DE-145TC $214.95 13-262-30-H-145TC $279.95 2.22 58 1827 612 ⅞˝ keyed 1⅛˝ dia. x 2⅝˝ keyed 17/16˝ dia. x 7˝ keyed 6⅜˝ x 3⅜˝ 53 13-325-30-L-56C 13-325-30-R-56C 13-325-30-DE-56C $302.95 13-325-30-H-56C $389.95 3.66 58 3045 585 ⅝˝ keyed 1⅜˝ dia. x 3¼˝ keyed 115/16˝ dia. x 8¾˝ keyed 7½˝ x 4˝ 90 13-325-30-L-145TC 13-325-30-R-145TC 13-325-30-DE-145TC $302.95 13-325-30-H-145TC $389.95 3.66 58 3045 585 ⅞˝ keyed 1⅜˝ dia. x 3¼˝ keyed 115/16˝ dia. x 8¾˝ keyed 7½˝ x 4˝ 90 13-133-40-L-56C 13-133-40-R-56C 13-133-40-DE-56C $107.95 N/A 0.38 44 356 254 ⅝˝ keyed ⅝˝ dia. x 2˝ keyed — 3¼˝ x 2˝ 20 13-175-40-L-56C 13-175-40-R-56C 13-175-40-DE-56C $130.95 13-175-40-H-56C $164.95 0.79 44 714 495 ⅝˝ keyed ⅞˝ dia. x 115/16˝ keyed 1˝ dia. x 63/16˝ keyed 43/16˝ x 2¾˝ 30 13-206-40-L-56C 13-206-40-R-56C 13-206-40-DE-56C $165.95 13-206-40-H-56C $199.95 1.09 44 1120 515 ⅝˝ keyed 1˝ dia. x 23/32˝ keyed 1⅛˝ dia. x 67/16˝ keyed 5˝ x 2⅞˝ 35 13-237-40-L-56C 13-237-40-R-56C 13-237-40-DE-56C $198.95 13-237-40-H-56C $229.95 1.45 44 1483 684 ⅝˝ keyed 1⅛˝ dia. x 2⅜˝ keyed 1¼˝ dia. x 67/16˝ keyed 5˝ x 2⅞˝ 41 13-262-40-L-56C 13-262-40-R-56C 13-262-40-DE-56C $214.95 13-262-40-H-56C $279.95 1.85 44 1919 720 ⅝˝ keyed 1⅛˝ dia. x 2⅝˝ keyed 17/16˝ dia. x 7˝ keyed 6⅜˝ x 3⅜˝ 53 13-325-40-L-56C 13-325-40-R-56C 13-325-40-DE-56C $302.95 13-325-40-H-56C $389.95 3.35 44 3692 697 ⅝˝ keyed 1⅜˝ dia. x 3¼˝ keyed 115/16˝ dia. x 8¾˝ keyed 7½˝ x 4˝ 90 13-325-40-L-145TC 13-325-40-R-145TC 13-325-40-DE-145TC $302.95 13-325-40-H-145TC $389.95 3.35 44 3692 697 ⅞˝ keyed 1⅜˝ dia. x 3¼˝ keyed 115/16˝ dia. x 8¾˝ keyed 7½˝ x 4˝ 90 13-133-50-L-56C 13-133-50-R-56C 13-133-50-DE-56C $107.95 N/A 0.29 35 312 254 ⅝˝ keyed ⅝˝ dia. x 2˝ keyed — 3¼˝ x 2˝ 20 13-175-50-L-56C 13-175-50-R-56C 13-175-50-DE-56C $130.95 13-175-50-H-56C $164.95 0.50 35 538 564 ⅝˝ keyed ⅞˝ dia. x 115/16˝ keyed 1˝ dia. x 63/16˝ keyed 43/16˝ x 2¾˝ 30 13-206-50-L-56C 13-206-50-R-56C 13-206-50-DE-56C $165.95 13-206-50-H-56C $199.95 0.74 35 830 587 ⅝˝ keyed 1˝ dia. x 23/32˝ keyed 1⅛˝ dia. x 67/16˝ keyed 5˝ x 2⅞˝ 35 13-237-50-L-56C 13-237-50-R-56C 13-237-50-DE-56C $198.95 13-237-50-H-56C $229.95 1.32 35 1527 763 ⅝˝ keyed 1⅛˝ dia. x 2⅜˝ keyed 1¼˝ dia. x 67/16˝ keyed 5˝ x 2⅞˝ 41 13-262-50-L-56C 13-262-50-R-56C 13-262-50-DE-56C $214.95 13-262-50-H-56C $279.95 1.37 35 1658 803 ⅝˝ keyed 1⅛˝ dia. x 2⅝˝ keyed 17/16˝ dia. x 7˝ keyed 6⅜˝ x 3⅜˝ 53 13-325-50-L-56C 13-325-50-R-56C 13-325-50-DE-56C $302.95 13-325-50-H-56C $389.95 2.49 35 3413 803 ⅝˝ keyed 1⅜˝ dia. x 3¼˝ keyed 115/16˝ dia. x 8¾˝ keyed 7½˝ x 4˝ 90 13-325-50-L-145TC 13-325-50-R-145TC 13-325-50-DE-145TC $302.95 13-325-50-H-145TC $389.95 2.49 35 3413 803 ⅞˝ keyed 1⅜˝ dia. x 3¼˝ keyed 115/16˝ dia. x 8¾˝ keyed 7½˝ x 4˝ 90 13-133-60-L-56C 13-133-60-R-56C 13-133-60-DE-56C $107.95 N/A 0.23 29 158 254 ⅝˝ keyed ⅝˝ dia. x 2˝ keyed — 3¼˝ x 2˝ 20 13-175-60-L-56C 13-175-60-R-56C 13-175-60-DE-56C $130.95 13-175-60-H-56C $164.95 0.38 29 433 613 ⅝˝ keyed ⅞˝ dia. x 115/16˝ keyed 1˝ dia. x 63/16˝ keyed 43/16˝ x 2¾˝ 30 13-206-60-L-56C 13-206-60-R-56C 13-206-60-DE-56C $165.95 13-206-60-H-56C $199.95 0.60 29 750 639 ⅝˝ keyed 1˝ dia. x 23/32˝ keyed 1⅛˝ dia. x 67/16˝ keyed 5˝ x 2⅞˝ 35 13-237-60-L-56C 13-237-60-R-56C 13-237-60-DE-56C $198.95 13-237-60-H-56C $229.95 0.86 29 1149 838 ⅝˝ keyed 1⅛˝ dia. x 2⅜˝ keyed 1¼˝ dia. x 67/16˝ keyed 5˝ x 2⅞˝ 41 13-262-60-L-56C 13-262-60-R-56C 13-262-60-DE-56C $214.95 13-262-60-H-56C $279.95 1.16 29 1670 882 ⅝˝ keyed 1⅛˝ dia. x 2⅝˝ keyed 17/16˝ dia. x 7˝ keyed 6⅜˝ x 3⅜˝ 53 13-325-60-L-56C 13-325-60-R-56C 13-325-60-DE-56C $302.95 13-325-60-H-56C $389.95 2.03 29 3127 882 ⅝˝ keyed 1⅜˝ dia. x 3¼˝ keyed 115/16˝ dia. x 8¾˝ keyed 7½˝ x 4˝ 90 13-325-60-L-145TC 13-325-60-R-145TC 13-325-60-DE-145TC $302.95 13-325-60-H-145TC $389.95 2.03 29 3127 882 ⅞˝ keyed 1⅜˝ dia. x 3¼˝ keyed 115/16˝ dia. x 8¾˝ keyed 7½˝ x 4˝ 90

102 Motor Mount Gear Reducers www.surpluscenter.com8

Motor Flange Mount Gear Reducers• Brand new, WORLDWIDE ELECTRIC right-angle worm gear reducers. Standard NEMA-C motor mounting flange. Cast iron housing.

Four tapped mounting holes on top and bottom of case. Shipped filled with oil. Item number suffix indicates electric motor frame. Max. input 1750 RPM.Select gear reducer by output speed, torque and power required, then choose between left, right, dual or hollow output shafts.

& 800-488-3407 Motor Mount Gear Reducers 103

Mounting bases sold separately.Available on our website.

Left Output

Right Output

Dual Output

Hollow Output

104 Right Angle Gear Reducers www.surpluscenter.com8• New. Cast iron gear reducers. Dimensionally interchangeable with Boston, Leeson, Winsmith and Morse.One piece housing, tapered roller bearings on output shaft. Standard NEMA-C motor mounting flange.Female input shaft so no coupler is required. Not filled with oil. All sizes have 4 tapped mounting holeson top and bottom of box.

5

10

15

20

30

40

50

60

Motor Flange Mount Dual Output Shaft to Shaft OutputMotor Motor Input Input Output in. lbs. Output Output Mtg. Bolt

Ratio ITEM Mount ITEM Mount ITEM Shaft HP RPM Torque Shaft Ctrline Ht Pattern Shpg. Price 13-133-5-56C-DE 56C 1.2 350 153 ⅝˝ x 2˝ 1.72˝ 2˝ x 3¼˝ 20 $ 79.95 13-175-5-56C 56C 13-175-5-56C-DE 56C 13-175-5-S ⅝˝ x 1¾˝ 2.05 350 220 ⅞˝ x 1⅞˝ 2.06˝ 2¾˝ x 43/16˝ 30 $ 89.95 13-206-5-56C 56C 13-206-5-56C-DE 56C 13-206-5-S ⅝˝ x 1¾˝ 2.9 350 416 1˝ x 2˝ 2.28˝ 2⅞˝ x 5˝ 35 $ 99.95 13-237-5-56C 56C 13-237-5-56C-DE 56C 3.91 350 640 1⅛˝ x 2⅜˝ 2.50˝ 2⅞˝ x 5˝ 41 $119.95 13-237-5-182-S ¾˝ x 2⅜˝ 3.91 350 640 1⅛˝ x 2⅜˝ 2.50˝ 2⅞˝ x 5˝ 41 $119.95 13-262-5-182TC 182TC 13-262-5-182TC-DE 182TC 13-262-5-S ¾˝ x 2⅜˝ 4.9 350 915 1⅛˝ x 2½˝ 2.94˝ 3⅜˝ x 6⅜˝ 56 $139.95 13-325-5-184TC 184TC 13-325-5-184TC-DE 184TC 13-325-5-S ⅞˝ x 2⅜˝ 9.1 350 1517 1⅜˝ x 3¼˝ 3.50˝ 4˝ x 7½˝ 93 $189.95 13-175-10-56C-DE 56C 13-175-10-S ⅝˝ x 1¾˝ 1.4 175 353 ⅞˝ x 1⅞˝ 2.06˝ 2¾˝ x 43/16˝ 30 $ 89.95 13-206-10-56C-DE 56C 13-206-10-S ⅝˝ x 1¾˝ 2.02 175 474 1˝ x 2˝ 2.28˝ 2⅞˝ x 5˝ 35 $ 99.95 13-206-10-56-S ⅝˝ x 1¾˝ 2.02 175 474 1˝ x 2˝ 2.28˝ 2⅞˝ x 5˝ 35 $ 99.95 13-237-10-56C 56C 13-237-10-56C-DE 56C 13-237-10-S ¾˝ x 2⅜˝ 2.72 175 851 1⅛˝ x 2⅜˝ 2.50˝ 2⅞˝ x 5˝ 41 $119.95 13-262-10-182TC 182TC 13-262-10-182TC-DE 182TC 13-262-10-S ¾˝ x 2⅜˝ 3.4 175 1296 1⅛˝ x 2½˝ 2.94˝ 3⅜˝ x 6⅜˝ 56 $139.95 13-325-10-184TC 184TC 13-325-10-184TC-DE 184TC 13-325-10-S ⅞˝ x 2⅜˝ 6.55 175 1764 1⅜˝ x 3¼˝ 3.50˝ 4˝ x 7½˝ 93 $189.95 13-237-15-56C 56C 2.64 117 1249 1⅛˝ x 2⅜˝ 2.50˝ 2⅞˝ x 5˝ 41 $119.95 13-262-15-56C 56C 3.22 117 1577 1⅛˝ x 2½˝ 2.94˝ 3⅜˝ x 6⅜˝ 53 $139.95 13-262-15-145TC 145TC 3.22 117 1577 1⅛˝ x 2½˝ 2.94˝ 3⅜˝ x 6⅜˝ 53 $139.95 13-133-20-56C-DE 56C 0.52 88 187 ⅝˝ x 2˝ 1.72˝ 2˝ x 3¼˝ 20 $ 79.95 13-175-20-56C 56C 13-175-20-S ⅝˝ x 1¾˝ 0.89 88 337 ⅞˝ x 1⅞˝ 2.06˝ 2¾˝ x 43/16˝ 30 $ 89.95 13-206-20-S ⅝˝ x 1¾˝ 1.2 88 417 1˝ x 2˝ 2.28˝ 2⅞˝ x 5˝ 35 $ 99.95 13-237-20-56C 56C 13-237-20-56C-DE 56C 13-237-20-S ¾˝ x 2⅜˝ 1.62 88 941 1⅛˝ x 2⅜˝ 2.50˝ 2⅞˝ x 5˝ 41 $119.95 13-237-20-145TC 145TC 1.62 88 941 1⅛˝ x 2⅜˝ 2.50˝ 2⅞˝ x 5˝ 41 $119.95 13-262-20-56C 56C 13-262-20-56C-DE 56C 13-262-20-S ¾˝ x 2⅜˝ 2 88 1474 1⅛˝ x 2½˝ 2.94˝ 3⅜˝ x 6⅜˝ 56 $139.95 13-262-20-145TC 145TC 2 88 1474 1⅛˝ x 2½˝ 2.94˝ 3⅜˝ x 6⅜˝ 56 $139.95 13-325-20-182TC 182TC 13-325-20-182TC-DE 182TC 13-325-20-S ⅞˝ x 2⅜˝ 3.98 88 1932 1⅜˝ x 3¼˝ 3.50˝ 4˝ x 7½˝ 93 $189.95 13-133-30-56C 56C 13-133-30-56C-DE 56C 13-133-30-S ½˝ x 1¾˝ 0.36 58 195 ⅝˝ x 2˝ 1.72˝ 2˝ x 3¼˝ 20 $ 79.95 13-175-30-56C 56C 13-175-30-56C-DE 56C 13-175-30-S ⅝˝ x 1¾˝ 0.65 58 432 ⅞˝ x 1⅞˝ 2.06˝ 2¾˝ x 43/16˝ 30 $ 89.95 13-206-30-S ⅝˝ x 1¾˝ 0.9 58 526 1˝ x 2˝ 2.28˝ 2⅞˝ x 5˝ 35 $ 99.95 13-237-30-56C-DE 56C 13-237-30-S ¾˝ x 2⅜˝ 1.2 58 945 1⅛˝ x 2⅜˝ 2.50˝ 2⅞˝ x 5˝ 41 $119.95 13-262-30-S ¾˝ x 2⅜˝ 1.54 58 1434 1⅛˝ x 2½˝ 2.94˝ 3⅜˝ x 6⅜˝ 53 $139.95 13-262-30-145TC 145TC 1.54 58 1434 1⅛˝ x 2½˝ 2.94˝ 3⅜˝ x 6⅜˝ 53 $139.95 13-325-30-56C-DE 56C 13-325-30-S ⅞˝ x 2⅜˝ 2.75 58 1941 1⅜˝ x 3¼˝ 3.50˝ 4˝ x 7½˝ 90 $189.95 13-325-30-145TC 145TC 2.75 58 1941 1⅜˝ x 3¼˝ 3.50˝ 4˝ x 7½˝ 90 $189.95 13-133-40-56C 56C 13-133-40-56C-DE 56C 13-133-40-S ½˝ x 1¾˝ 0.31 44 216 ⅝˝ x 2˝ 1.72˝ 2˝ x 3¼˝ 20 $ 79.95 13-175-40-56C-DE 56C 0.56 44 345 ⅞˝ x 1⅞˝ 2.06˝ 2¾˝ x 43/16˝ 30 $ 89.95 13-206-40-56C-DE 56C 13-206-40-S ⅝˝ x 1¾˝ 0.76 44 428 1˝ x 2˝ 2.28˝ 2⅞˝ x 5˝ 35 $ 99.95 13-237-40-56C-DE 56C 13-237-40-S ¾˝ x 2⅜˝ 1 44 937 1⅛˝ x 2⅜˝ 2.50˝ 2⅞˝ x 5˝ 41 $119.95 13-262-40-56C 56C 13-262-40-56C-DE 56C 13-262-40-S ¾˝ x 2⅜˝ 1.18 44 1477 1⅛˝ x 2½˝ 2.94˝ 3⅜˝ x 6⅜˝ 53 $139.95 13-325-40-56C 56C 13-325-40-56C-DE 56C 13-325-40-S ⅞˝ x 2⅜˝ 2.3 44 1931 1⅜˝ x 3¼˝ 3.50˝ 4˝ x 7½˝ 90 $189.95 13-325-40-145TC 145TC 2.3 44 1931 1⅜˝ x 3¼˝ 3.50˝ 4˝ x 7½˝ 90 $189.95 13-133-50-56C 56C 13-133-50-56C-DE 56C 13-133-50-S ½˝ x 1¾˝ 0.26 35 216 ⅝˝ x 2˝ 1.72˝ 2˝ x 3¼˝ 20 $ 79.95 13-175-50-56C 56C 13-175-50-56C-DE 56C 13-175-50-S ⅝˝ x 1¾˝ 0.44 35 360 ⅞˝ x 1⅞˝ 2.06˝ 2¾˝ x 43/16˝ 30 $ 89.95 13-206-50-56C 56C 13-206-50-S ⅝˝ x 1¾˝ 0.62 35 501 1˝ x 2˝ 2.28˝ 2⅞˝ x 5˝ 35 $ 99.95 13-237-50-56C 56C 13-237-50-56C-DE 56C 13-237-50-S ¾˝ x 2⅜˝ 0.83 35 818 1⅛˝ x 2⅜˝ 2.50˝ 2⅞˝ x 5˝ 41 $119.95 13-262-50-56C 56C 13-262-50-56C-DE 56C 13-262-50-S ¾˝ x 2⅜˝ 1.04 35 1164 1⅛˝ x 2½˝ 2.94˝ 3⅜˝ x 6⅜˝ 53 $139.95 13-325-50-56C 56C 13-325-50-56C-DE 56C 13-325-50-S ⅞˝ x 2⅜˝ 1.95 35 2012 1⅜˝ x 3¼˝ 3.50˝ 4˝ x 7½˝ 90 $189.95 13-325-50-145TC 145TC 1.95 35 2012 1⅜˝ x 3¼˝ 3.50˝ 4˝ x 7½˝ 90 $189.95 13-133-60-56C 56C 13-133-60-56C-DE 56C 13-133-60-S ½˝ x 1¾˝ 0.25 29 153 ⅝˝ x 2˝ 1.72˝ 2˝ x 3¼˝ 20 $ 79.95 13-175-60-S ⅝˝ x 1¾˝ 0.37 29 323 ⅞˝ x 1⅞˝ 2.06˝ 2¾˝ x 43/16˝ 30 $ 89.95 13-237-60-S ¾˝ x 2⅜˝ 0.69 29 856 1⅛˝ x 2⅜˝ 2.50˝ 2⅞˝ x 5˝ 41 $119.95 13-262-60-S ¾˝ x 2⅜˝ 0.87 29 1299 1⅛˝ x 2½˝ 2.94˝ 3⅜˝ x 6⅜˝ 53 $139.95 13-325-60-56C-DE 56C 1.74 29 1765 1⅜˝ x 3¼˝ 3.50˝ 4˝ x 7½˝ 90 $189.95

— — — — —

— — — —

— — — — — —

— — — — — — — — —

— — — — — — — — — — — — — — — — — — — — — — — — — — —

800-488-3407 Right Angle Gear Reducers 105&

Separate mounting base is included. Furnished with output shaft to left when viewed from motor flange.Easily changed to right output. Max. input speed 1750 RPM.Shaft to Shaft versions have standard keyed input shafts. Input can be from direct coupling, chain andsprocket or pulleys. Allows additional gear reduction between motor and box resulting in additional torqueand lower output speeds.

Motor Flange Mount

Dual Output

Shaft to Shaft

8106 Shaft Mount Gear Reducers & Accessories www.surpluscenter.com

Motor Mount• Heavy gauge painted steel construc-tion for NEMA frame motors. Adjustabletop plate for drive belt tensioning andalignment.

Select to match reducer size.ITEM Size Motor Frame Shpg. Price13-2-MM 2 56-215T 34 lbs. $151.9513-3-MM 3 56-215T 36 lbs. $159.9913-4-MM 4 143-286T 79 lbs. $249.9913-5-MM 5 143-286T 82 lbs. $259.9913-6-MM 6 143-286T 107 lbs. $337.95

BackstopAssembly

• Ensures smooth forwardoperation of conveyor withno back slip.

Select to match reducer size.ITEM Size Shpg. Price

13-2-BSK 2 2 lbs. $89.9913-3-BSK 3 2 lbs. $109.9913-4-BSK 4 2 lbs. $119.9913-5-BSK 5 3 lbs. $129.9913-6-BSK 6 4 lbs. $240.95

Belt Guard• Heavy gauge painted all steel construc-tion. Screened face.Select to match reducer size.ITEM Size Shpg. Price13-2-BG 2 30 lbs. $151.9513-3-BG 3 38 lbs. $171.9513-4-BG 4 44 lbs. $197.9513-5-BG 5 48 lbs. $217.9513-6-BG 6 61 lbs. $247.95

Size 4 $99.99 each Size 5 $129.99 each Size 6 $159.99 eachITEM Diam. Shpg. ITEM Diam. Shpg ITEM Diam. Shpg.13-4-TBK-11516 115/16˝ 8 lbs. 13-5-TBK-2316 23/16˝ 11 lbs 13-6-TBK-212 2½˝ 15 lbs.13-4-TBK-2 2˝ 8 lbs. 13-5-TBK-214 2¼˝ 11 lbs 13-6-TBK-21116 211/16˝ 14 lbs.13-4-TBK-218 2⅛˝ 8 lbs. 13-5-TBK-2716 27/16˝ 10 lbs 13-6-TBK-278 2⅞˝ 13 lbs.13-4-TBK-2316 23/16˝ 8 lbs. 13-5-TBK-212 2½˝ 10 lbs 13-6-TBK-21516 215/16˝ 13 lbs.13-4-TBK-214 2¼˝ 7 lbs. 13-5-TBK-21116 211/16˝ 9 lbs 13-6-TBK-3 3˝ 12 lbs.13-4-TBK-2716 27/16˝ 7 lbs. 13-5-TBK-21516 215/16˝ 8 lbs 13-6-TBK-3716 37/16˝ 10 lbs.

2

3

4

5

6

23

4

5

6

Tapered Bushings• Twin tapered bushing kit for shaft mount reducers. Includes two bush-

ings, bolts and full length shaft key.Order bushing by gear reducer size and diameter of shaft it will be mounted on.

Size 2 $59.99 each Size 3 $69.99 eachITEM Diam. Shpg. ITEM Diam. Shpg.13-2-TBK-1516 15/16˝ 5 lbs. 13-3-TBK-11116 111/16˝ 6 lbs.13-2-TBK-138 1⅜˝ 5 lbs. 13-3-TBK-134 1¾˝ 6 lbs.13-2-TBK-1716 17/16˝ 5 lbs. 13-3-TBK-178 1⅞˝ 6 lbs.13-2-TBK-112 1½˝ 5 lbs. 13-3-TBK-11516 115/16˝ 5 lbs.13-2-TBK-158 1⅝˝ 4 lbs. 13-3-TBK-2 2˝ 5 lbs.13-2-TBK-11116 111/16˝ 4 lbs. 13-3-TBK-2316 23/16˝ 5 lbs.13-2-TBK-134 1¾˝ 4 lbs.13-2-TBK-11516 115/16˝ 4 lbs.

Shaft Mount Gear Reducers

• Brand new, WORLDWIDE Electric Corp. shaft mount reducers. Service class III. Cast iron housing, highgrade case hardened steel gears and shafts. Double lip seals. Metal reinforced double lips, spring loadedoil seals. Size 2 gear reducers have ball bearings, Size 3-6 gear reducers have tapered roller bearings.Torque arm included. Interchangeable with Dodge, Hub City, Edison and Browning shaft mount reducers.

Find tapered bushings and other accessories in the charts below.

Tapered bushing kit sold separately - see chart below for output bore and appropriate ITEM number.

Performance SpecificationsReducer Input Output Torque Min. DriveSize ITEM Model Ratio HP RPM (in-lbs.) Pulley Diam. Shpg. Price

13-2-SMR-15 SMR2-15:1 15:1 5 HP 104-140 2899-2154 in.-lbs. 3.0˝ 71 lbs. $399.9913-2-SMR-25 SMR2-25:1 25:1 3 HP 58-85 3119-2128 in.-lbs. 3.0˝ 71 lbs. $399.9913-3-SMR-15 SMR3-15:1 15:1 7.5 HP 94-140 4811-3230 in.-lbs. 4.0˝ 94 lbs. $631.9513-3-SMR-25 SMR3-25:1 25:1 5 HP 57-85 5290-3547 in.-lbs. 4.0˝ 93 lbs. $631.9513-4-SMR-15 SMR4-15:1 15:1 10 HP 79-141 7633-4277 in.-lbs. 4.6˝ 175 lbs. $853.9513-4-SMR-25 SMR4-25:1 25:1 7.5 HP 57-85 7934-5321 in.-lbs. 4.6˝ 170 lbs. $853.9513-5-SMR-15 SMR5-15:1 15:1 20 HP 115-125 10487-9648 in.-lbs. 5.4˝ 221 lbs. $1281.9513-5-SMR-25 SMR5-25:1 25:1 10 HP 46-78 13109-7731 in.-lbs. 5.4˝ 215 lbs. $1281.9513-6-SMR-15 SMR6-15:1 15:1 30 HP 99-125 18276-14472 in.-lbs. 6.2˝ 345 lbs. $1675.9513-6-SMR-25 SMR6-25:1 25:1 20 HP 58-70 20794-17229 in.-lbs. 6.2˝ 333 lbs. $1675.95

Physical SpecificationsReducer Input

Size Shaft Size

1⅛˝ diam. x 39/16˝ w/¼˝ keyway 8⅜˝ x 117/16˝ x 5⅞˝

1¼˝ diam. x 45/16˝ w/¼˝ keyway 9¼˝ x 12⅞˝ x 79/16˝

17/16˝ diam. x 59/16˝ w/⅜˝ keyway 10⅜˝ x 15⅛˝ x 83/16˝Truck freight only.

115/16˝ diam. x 5¾˝ w/½˝ keyway 13⅛˝ x 185/16˝ x 813/16˝Truck freight only.

23/16˝ diam. x 61/16˝ w/½˝ keyway 15⅛˝ x 215/16˝ x 9⅝˝Truck freight only.

800-488-3407 Right Angle Gearboxes 107&

1:0.92 Gearbox

ITEM 13-1422$99.95

• New, right angle gearbox. Original gear-box used for fan drives on BOBCAT skidsteer loaders. Replaces gearbox on models763, 773, S185 and other models with thisstyle of gearbox. Ideal for original equip-ment and other high speed applications.Clockwise input produces clockwise onoutput shaft. Aluminum housing. Plasticbreather with rubber extension hose.SPECIFICATIONS• Part # 6734104 • Assembly # PM101801• Gear ratio 1:0.92 • Input HP 6 estimated• Input RPM 3600 max. • Input shaft ¾˝x 1¾˝w/keyway• Input side foot mount 2 bolt on 3˝ bolt center • Output side mount 4 bolt on 4˝ bolt circle w/2½˝ pilot• Tapered output shaft 1¼˝ taper per foot w/½-20threaded end, 2.1˝ overall length measured from seal• Size 12½˝ x 5˝ x 7˝ • Shpg. 14 lbs.

PTOIn/OutBox

ITEM 3-968-PTO $49.99• New, military surplus PTO in/out boxonly. Built to mount onto a 7500 lb. PTOwinch. Shifting the handle slides the en-gagement collar in and out. Originally usedto en -gage/ disengage the PTO winch.Made to seal against the winch body andreceive lubricating oil from the winch.SPECIFICATIONS• PTO In/Out Box 6 bolt mount• 13/16˝ 10 tooth sliding engagement collar• 1˝ dia. x 1⅝˝ long output shaft w/cross-hole• Overall size 10˝ x 5½˝ x 7½˝ (without handle)• Shpg. 15 lbs.

Dual OutputSpeedIncreaserITEM 13-1426$179.95

• New, COMER Model 9.696.000. Made for Gehl Inc. Two outputshafts with different gear ratios for each.SPECIFICATIONS • Output shaft (1) horizontal:• HP rating (1000 hr bearing life) 1½˝ dia x 1.305˝ tapersInput 165 HP to 1¼˝ dia. keyed (⅛˝ / 1˝ taper)Output shaft (1) 148 HP • Output shaft (2) vertical:Output shaft (2) 87 HP 1⅜˝ 6 T spline x 3½˝• Gear ratios: • Mountings:Shaft (1) 1:1.353, Shaft (2) 1:5.51 4 bolt pad at input 3.86˝ B.C• Input RPM 540 max. 4 bolt pad at shaft (1) 5˝ B.C.• Output RPM: 4 bolt pad at shaft (2) 2.56˝ x 5.62˝Shaft (1) 730, Shaft (2) 2978 2 bolt on body 6.45˝ c/c• Input shaft 1⅜˝ 21 T spline x 3.85˝ long • Size 17˝ x 12˝ x 15½˝• Oil capacity 4.8 qt. • Shpg. 170 lbs.

Truck freight only.

Right Angle GearboxITEM 13-1428$249.95• New, COMER Model 18500000A01vertically oriented right anglegearbox. Two pairs of outputshafts with different ratios.

SPECIFICATIONS• Ratio 1:1 & 1:3• Power cont. 140 HP andpeak 280 HP max.• Input speed 1000 RPM max.• Output speed 3000 & 1000 RPM max.• Torque unknown max.• Motor mount NA• Input shaft 1¾˝ dia. x 3½˝ 20 T spline w/retention grooveInput shaft mount has four 5/16˝-18 RH tapped holes on 4⅞˝ dia. bolt circle• Input case has ⅝˝-11 RH tapped mtg. holes on top and bottom of case 5˝ x 5˝ ctrs.• Output shafts all four 1⅜˝ dia. x 3½˝ 21 toothOutput 1 shaft pair is horizontally oriented and is 1:1 ratio,Output 1 shafts each mount w/four 5/16˝-18 RH tapped holes on 4⅛˝ dia. BCOutput 2 shaft pair is vertically oriented with 1:3 ratioOutput 2 shafts each mount w/four 5/16˝-18 RH tapped holes on 4⅝˝ dia. BC• Two output cases have ½˝-13 RH tapped mtg. holes ontop and bottom of case on 4½˝ x 35/16˝ ctrs.• Size 25˝ x 22½˝ x 12˝• Shpg. 237 lbs.

Truck freight only.

Right AngleGearbox

ITEM 13-1423 $149.95• Brand new. Right angle gearbox. Onepiece cast iron gear case and bearing caps.Roller bearings. Shafts rotate in oppositedirections when viewed from end.SPECIFICATIONS• 1:1 gear ratio • Input shaft 1˝ diam. x• 40 HP input intermittent 2½˝ w/5/16˝ crosshole• 32 HP input continuous • Output shaft 1˝ diam.• 1800 RPM input max. x 2¼˝ w/keyway• 4¼˝ square ⅜˝ tapped • Size 5⅞˝ x 6¼˝ x 4⅛˝mounting holes • Shpg. 23 lbs.

1:1 Dual OutputGearbox

ITEM 13-1327 $349.95• New, HUB-CITY Model 800. Ruggedductile iron housing, tapered roller bear-ings and heavy-duty industrial seals. Dualsplined output shafts. Input side accepts ahydraulic motor with 4 bolt SAE B mountand 1¼˝ 14 tooth splined shaft. Inputmount and parallel output shaft rotatesame direction; the second output shaftrotates the opposite direction.SPECIFICATIONS • Input accepts 1¼˝ diam.• Gear ratio 1:1 14T splined shaft• Input HP 132 • Output shafts• Input RPM 1750 1⅜˝ dia. x 2¾˝ 6T spline• Output RPM at rated • Four mtg. holes tappedinput RPM 1750 ½˝-13 on 6½˝ sq. pattern• Output torque 4750 in-lb. • Size 12¾˝ x 12¾˝ x 8¼˝(between the two shafts) • Shpg. 106 lbs.

Input

Output 1Output 2

Output 1

Output 1

Input

Output 2

Right AngleGearDrives

• Brand new CURTIS. One piece cast irongear case is precision machined for bear-ings and gears. Cast aluminum bearingcaps. Timken roller bearings. Dual lipseals. All boxes 1:1 gear ratio, all shaftssmooth w/keyway. Made in USA.32 HP ModelITEM 1324 $219.95SPECIFICATIONS • HP 40 intermittent• Max. 1800 RPM • HP 31.83 continuous• Shafts 1˝ diam. x 2˝ • Oil cap. 1 pint• 4¼˝ square ⅜˝ tapped • Size 6¼˝ x 6¼˝ x 4¼˝mounting holes • Shpg. 24 lbs.61 HP ModelITEM 1325 $424.95SPECIFICATIONS • HP 70.48 intermittent• Max. 1400 RPM • HP 60.51 continuous• Shafts 1¼˝ diam. x 2½˝ • Oil cap. 1½ pints• 4½˝ square ½˝ tapped • Size 8˝ x 8˝ x 5⅝˝mounting holes • Shpg. 41 lbs.

ITEM 1326 $434.95• Same as ITEM 1325 except has 3 shafts.110 HP ModelITEM 1327 $726.95SPECIFICATIONS • HP 139.78 intermittent• Max. 1000 RPM • HP 123.52 continuous• Shafts 1⅜˝ diam. x 215/16˝ • Oil cap. 4 pints• 6˝ square ½˝ tapped • Size 10½˝ x 10½˝ x 7½˝mounting holes • Shpg. 75 lbs.

Maximum HP Ratings at Various Speeds

ITEM 1324 1325/1326 1327 100 RPM 3.28 6.94 18.71 500 RPM 14.05 29.34 77.84 700 RPM 18.86 39.25 103.67 1000 RPM 25.65 53.18 139.78 1400 RPM 33.14 70.48 — 1800 RPM 40.00 — —

5.25:1Gearbox

ITEM 13-1064$19.95• New. Aluminum housing. Both input andoutput shafts in area surrounded by inte-gral mounting feet. 5.25:1 ratio to either in-crease or decrease speed. Shafts ⅜˝ diam.x ½˝ long w/pin holes. Shafts turn in samedirection. Size 7˝ x 5½˝ x 4˝. Shpg. 4 lbs.

108 Right Angle Gearboxes www.surpluscenter.com8

60:1 GearReducer

ITEM 13-1444-A$59.95

• New, Morse right angle gear reducer.Very compact size. Aluminum alloy case,bronze gears and tapered roller bearings.SPECIFICATIONS• Ratio 60:1 • Input centerline height 4˝• Power ⅙ HP max. • Output shaft• Input 1750 RPM max. ½˝ dia. x 2˝ with flat• Output 29.2 RPM max. • Output centerline ht. 2¼˝• Torque 181 in. lbs. max. • Mount 4⅝˝ x 2⅜˝• Input shaft • Size 5½˝ x 3¼˝ x 55/16˝½˝ dia. x 1⅜˝ with flat • Shpg. 7 lbs.

60:1 RAGearReducerITEM 13-1464$39.95• New take-offs, LEESON ModelW5209014 right angle gear reducer. Alumi -num housing. Four M7-1.0 bolts aroundthe input bore on 86mm diameter bolt cir-cle. Four M6-1.00 tapped mounting holesaround output bore on 94 mm diameterbolt circle.SPECIFICATIONS• Ratio 60:1 • Input shaft 14mm keyed• Power 0.6 HP max. hollow input bore• Input speed 1750 max. • Output shaft 1⅛˝ diam.• Output speed x 33/16˝ thru length29.16 RPM max. hollow output bore• Torque 445 in.-lbs. max. • Mount four tapped mtg.• Motor mount IEC 71B14 holes on each output side• Size 5½˝ x 6½˝ x 43/16˝ • Shpg. 9 lbs.

50:1 RAGear

ReducerITEM 13-1461$39.95

• New take-offs, FFI Automation part num-ber FFI-W-050050-3 right-angle gear re-ducer. Aluminum housing. Motor mounthas four 7 mm holes on 85 mm B.C. Fourmounting holes on either side of outputbore, tapped M6-1.0 on 94 mm B.C.SPECIFICATIONS• Ratio 50:1 • Output bore accepts• Power 0.55 HP max. 1⅛˝ dia. keyed shaft x 33/16˝• Input speed 1750 RPM max. bore thru-length• Output speed 35 RPM max.• Mount four tapped holes• Torque 613 in-lbs. max. on each side of output bore• Motor mount IEC 71B14 • Size 5½˝ x 4⅛˝ x 6¼˝• Input shaft 14 mm, keyed • Shpg. 9 lbs.

35:1 GearReducer

ITEM 13-990-A$79.99• New, ROBBINS & MYERS (ALLING LAN-DER) Model 192-V-01R-123 vertical gearreducer. Cast iron housing. Top flange haseight mounting holes tapped 5/16˝-18 on 5⅝˝B.C. Foot mount has four ⅜˝ mountingholes on 4½˝ x 4½˝ centers.SPECIFICATIONS• Ratio 35:1 • Input shaft ⅝˝ x 1⅞˝ keyed• Power 0.28 HP max. • Output shaft 1˝ x 2˝ keyed• Input 840 RPM max. • Mount foot and top• Output 24 RPM max. • Size 7˝ x 7˝ x 7¾˝• Torque 500 in-lbs. max. • Shpg. 31 lbs.

49:1 RAGearReducerITEM 13-1441$49.95• New take-offs, STM Model RMI 50P gearreducer. Aluminum housing. Motor mounthas four 7 mm holes on 85 mm B.C. Fourmounting holes on either side of outputbore, tapped M8-1.25 on 85 mm B.C.SPECIFICATIONS• Ratio 49:1 • Output bore accepts• Power 0.34 kW max. 1˝ dia. keyed shaft x 3⅞˝• Input 1400 RPM max. bore thru-length• Output 29 RPM max. • Mount 4 tapped holes on• Torque 637 in-lbs. max. each side of output bore• Motor mount IEC 71 • Size 6˝ x 4˝ x 6⅜˝• Input shaft 14 mm keyed • Shpg. 10 lbs.

50:1 Right AngleGearReducers

• New, ELECTRA-GEAR Model 2400 rightangle gear reducer. Platinum finish alu-minum gear case with zinc plated outputshaft for corrosion resistance. SPECIFICATIONS • 900 in-lbs. output torque• Gear ratio 50:1 • Output shaft 1⅛˝ diam.• 1750 RPM input max. x 5˝ full length keyed• 0.91 HP input max. • 4 bolt base mount on• 35 output RPM 6⅜˝ x 3⅜˝ bolt centers• Input shaft ¾˝ diam. • Size 7½˝ x 6˝ x 7¼˝x 2˝ w/¼˝ cross hole • Shpg. 23 lbs.

ITEM 13-1399-L $99.95• Output shaft extends to the left whenviewed from the input side.

ITEM 13-1399-R $99.95• Output shaft extends to the right whenviewed from the input side.

Durst Right AngleGear Reducers$89.95 each

• New, DURST A1021 cast iron wormgear reducer. Grease zerks for eachend of worm shaft. Rotation is direc-tion output turns on right side with CWrotation facing input. Some items have2 bolt SAE A flange for direct mountinghydraulic motors.

SPECIFICATIONS• Input speed 1800 RPM max. • Mtg. holes 4 tapped (½-13) holes on each side• Gear centerline distance 2.68˝ • Mtg. pattern 4.062˝ bolt circle• Input shaft female 1˝ dia. , ¼˝ keyway • Size 6½˝ x 4˝ x 7½˝• Output shaft female 1¼˝ dia. through shaft, ¼˝ keyway • Shpg. 30 lbs.No Input Mount

Durst Input Output Output Input OutputITEM Model # Gear Ratio Mtg. Rotation Speed HP Torque

13-1477-10-R A1021MM10L 10:1 None R 180 3.57 109513-1477-10-L A1021MM10R 10:1 None L 180 3.57 109513-1477-20-R A1021MM20R 20:1 None R 180 2.19 119813-1477-20-L A1021MM20L 20:1 None L 180 2.19 1198SAE A 2 Bolt Flange Mount13-1478-10-R A1021M10RH 10:1 SAE A R 90 3.57 109513-1478-20-L A1021M20LH 20:1 SAE A L 90 2.09 1198

1:1.05 SpeedIncreaser

ITEM 13-1486$299.99

• New, BONDIOLI & PAVESI right angleoutboard gearbox on Bushhog 3209 rotarycutter and others. Horizontal input and ver-tical output downward. CCW input givesCW output.SPECIFICATIONS• Gear ratio 1:1.05 • Output shaft 1.35˝ dia.• Input RPM 540 18 T spline w/tapered root• Output RPM 567 stepped to M36x3 thread,• Input HP 190 3.4˝ total length• Input shaft • Pilot 5½˝ dia.1¾˝ 20 T spline 3˝ long • Size 11˝ x 9½˝ x 14½˝

• Mtg. 6 holes on 8.77˝ B.C. • Shpg. 150 lbs.Truck freight only.

800-488-3407 Weld-on Sprockets & Hubs 109&

40 Pitch 50 Pitch 60 Pitch # Teeth ITEM Dia Hub Price ITEM Dia Hub Price ITEM Dia Hub Price

9 – – – – 1-1980-9 2.09 V $3.29 1-1981-9 2.51 V $4.29 10 – – – – 1-1980-10 2.30 V $3.39 1-1981-10 2.76 V $4.49 11 1-1979-11 2.00 V $2.49 1-1980-11 2.50 V $3.79 1-1981-11 3.00 W $5.00 12 1-1979-12 2.17 V $2.59 1-1980-12 2.71 W $3.99 1-1981-12 3.25 W $5.19 13 1-1979-13 2.33 V $2.69 1-1980-13 2.92 W $4.19 1-1981-13 3.49 W $5.29 14 1-1979-14 2.49 V $2.79 1-1980-14 3.12 W $4.39 1-1981-14 3.74 W $6.00 15 1-1979-15 2.65 V $2.99 1-1980-15 3.32 W $4.69 1-1981-15 3.98 X $6.39 16 1-1979-16 2.82 W $3.09 1-1980-16 3.52 W $5.00 1-1981-16 4.22 X $6.59 17 1-1979-17 2.98 W $3.39 1-1980-17 3.72 X $5.29 1-1981-17 4.47 X $7.19 18 1-1979-18 3.14 W $3.49 1-1980-18 3.92 X $5.39 1-1981-18 4.7 X $7.35 19 1-1979-19 3.23 W $3.69 1-1980-19 4.13 X $6.00 1-1981-19 4.95 X $8.10 20 1-1979-20 3.48 X $3.99 1-1980-20 4.33 X $6.00 1-1981-20 5.19 X $9.49 21 1-1979-21 3.62 X $4.49 1-1980-21 4.53 X $6.59 1-1981-21 5.46 X $10.49 22 1-1979-22 3.78 X $5.00 1-1980-22 4.72 X $7.00 1-1981-22 5.67 X $11.49 23 1-1979-23 3.94 X $5.39 1-1980-23 4.92 X $7.29 1-1981-23 5.91 X $12.39 24 1-1979-24 4.1 X $5.59 1-1980-24 5.13 X $7.49 1-1981-24 6.15 X $13.19 25 1-1979-25 4.26 X $6.00 1-1980-25 5.33 X $8.19 1-1981-25 6.4 X $13.95 26 1-1979-26 4.42 X $6.29 1-1980-26 5.53 X $9.00 1-1981-26 6.63 X $14.95 27 1-1979-27 4.58 X $6.79 1-1980-27 5.72 X $9.39 1-1981-27 6.87 X $15.95 28 1-1979-28 4.74 X $7.29 1-1980-28 5.93 X $9.69 1-1981-28 7.15 X $16.95 29 1-1979-29 4.90 X $7.79 1-1980-29 6.12 X $10.00 1-1981-29 7.35 X $17.95 30 1-1979-30 5.06 X $8.39 1-1980-30 6.32 X $10.95 1-1981-30 7.59 X $18.95 31 1-1979-31 5.22 X $8.49 1-1980-31 6.52 X $11.95 1-1981-31 7.83 X $19.95 32 1-1979-32 5.38 X $8.89 1-1980-32 6.72 X $12.95 1-1981-32 8.07 X $21.00 33 1-1979-33 5.54 X $9.19 1-1980-33 6.92 X $13.29 1-1981-33 8.30 X $22.95 34 1-1979-34 5.70 X $9.59 1-1980-34 7.12 X $14.49 1-1981-34 8.54 X $23.95 35 1-1979-35 5.86 X $9.79 1-1980-35 7.32 X $15.29 1-1981-35 8.78 X $24.95 36 1-1979-36 6.02 X $10.19 1-1980-36 7.52 X $16.29 1-1981-36 9.02 X $25.95 37 1-1979-37 6.18 X $10.49 1-1980-37 7.72 X $17.79 1-1981-37 9.26 X $27.95 38 1-1979-38 6.33 X $10.95 1-1980-38 7.92 X $18.49 1-1981-38 9.50 X $28.95 39 1-1979-39 6.49 X $11.95 1-1980-39 8.12 X $18.99 1-1981-39 9.74 X $30.95 40 1-1979-40 6.65 X $11.95 1-1980-40 8.32 X $19.49 1-1981-40 9.98 X $31.95 41 1-1979-41 6.81 X $12.95 1-1980-41 8.52 X $19.99 1-1981-41 10.22 X $32.95 42 1-1979-42 6.97 X $12.99 1-1980-42 8.72 X $20.49 1-1981-42 10.46 X $33.95 43 1-1979-43 7.13 X $13.95 1-1980-43 8.91 X $21.49 1-1981-43 10.70 X $36.95 44 1-1979-44 7.29 X $14.95 1-1980-44 9.11 X $22.49 1-1981-44 10.94 X $38.95 45 1-1979-45 7.45 X $15.29 1-1980-45 9.31 X $22.99 1-1981-45 11.18 X $38.95 46 1-1979-46 7.61 X $16.00 1-1980-46 9.51 X $23.95 1-1981-46 11.42 X $38.95 48 1-1979-48 7.93 X $17.00 1-1980-48 9.91 X $25.95 1-1981-48 11.89 X $39.99 50 1-1979-50 8.25 X $19.95 1-1980-50 10.31 X $27.95 – – – – 52 – – – – 1-1980-52 10.71 X $28.95 – – – – 54 1-1979-54 8.89 X $20.95 1-1980-54 11.11 X $32.95 1-1981-54 13.33 X $44.99 60 1-1979-60 9.84 X $24.00 1-1980-60 12.30 X $39.95 1-1981-60 14.76 X $59.99 72 1-1979-72 11.75 X $34.95 1-1980-72 14.69 X $49.99 – – – –

Shipping Weights

12-40 Teeth 2 lbs. 12-25 Teeth 2 lbs. 12-23 Teeth 3 lbs. 41-50 Teeth 4 lbs. 26-40 Teeth 4 lbs. 24-30 Teeth 4 lbs. 54-60 Teeth 5 lbs. 41-48 Teeth 7 lbs. 31-40 Teeth 8 lbs. 72 Teeth 9 lbs. 49-60 Teeth 11 lbs. 41-48 Teeth 12 lbs. 72 Teeth 17 lbs. 54-60 Teeth 19 lbs.

Bore V Hub W Hub X Hub ½˝ 1-2341-A 1-2342-A – 9/16˝ 1-2341-B 1-2342-B – ⅝˝ 1-2341-C 1-2342-C 1-2343-C 11/16˝ 1-2341-D 1-2342-D 1-2343-D ¾˝ 1-2341-E 1-2342-E 1-2343-E 13/16˝ 1-2341-F 1-2342-F 1-2343-F ⅞˝ 1-2341-G 1-2342-G 1-2343-G 15/16˝ – 1-2342-H 1-2343-H 1˝ – 1-2342-I 1-2343-I 11/16˝ – 1-2342-J 1-2343-J 1⅛˝ – 1-2342-K 1-2343-K 13/16˝ – 1-2342-L 1-2343-L 1¼˝ – 1-2342-M 1-2343-M 15/16˝ – – 1-2343-N 1⅜˝ – – 1-2343-O 17/16˝ – – 1-2343-P 1½˝ – – 1-2343-Q ¾˝ Hex – 1-2342-EHX – ⅞˝ Hex – 1-2342-GHX –1¼˝ Hex – 1-2342-MHX –1⅛˝ 6 Spl – 1-2342-KSP –1¼˝ 6 Spl – 1-2342-MSP – Shpg. 1 lb. 1½ lbs. 2 lbs. Price $3.29 $4.19 $5.49

1˝ 15 Spline BoreITEM 1-2342-15SP W Hub $9.95

Weld-on Roller Chain Sprockets & Hubs

• Brand new. Weld on roller chain sprocket and hub assembly allows multiple combinationof bore to sprocket types. Hubs have machined pilot for sprocket to slip over for easyalignment and welding. Keyway slot and set screw furnished with hub.

ORDERING: Select sprocket by pitch and number of teeth to match the letter code ofhub with desired bore size. Dimensions of Hubs

All hubs furnished with standard keywayand two setscrews. V Hub W Hub X Hub A 1⅛˝ A 1⅝˝ A 2˝ B 17/16˝ B 113/16˝ B 2½˝ C 7/16˝ C 7/16˝ C 7/16˝ D ¾˝ D 1˝ D 1˝ E 13/16˝ E 17/16˝ E 17/16˝

A B

CD

E

35 Pitch ANSIRoller ChainSprocket

ITEM 1-2413-10-A-NK $2.00• New, ANSI. Smooth bore with two set-screws, no keyway.SPECIFICATIONS • Outside diam. 1⅜˝• Pitch 35 • Bore ½˝ diam.• Teeth 10 • Shpg. 0.1 lb.

8110 Fixed Bore Sprockets www.surpluscenter.com

Roller Chain Sprockets• Brand new ANSI standard sprockets. Fin-ished, keyed bore with set screw. Carbonsteel with heat-treated teeth.• Select an ITEM number for sprocket fromchart according to chain pitch, number ofteeth and add suffix letter according tobore size.Example: ITEM 1-2413-10-A is a 35 pitch sprocket with 10 teethand ½˝ bore. ITEMS 1-2413-10-AA and 1-2413-11-AA have no keyway.

35 Pitch Finished BoresITEM - Teeth OD ⅜˝ ½˝ ⅝˝ ¾˝ ⅞˝ 1˝ 1⅛˝ 13/16˝ 1¼˝ Price 1-2413-10 1.38˝ AA A B – – – – – – $3.00 1-2413-11 1.50˝ AA A B C – – – – – $2.80 1-2413-12 1.63˝ – A B C – – – – $2.95 1-2413-13 1.75˝ – A B C – – – – – $3.10 1-2413-14 1.87˝ – A B C – – – – – $3.10 1-2413-15 1.99˝ – A B C D E – – – $3.20 1-2413-16 2.11˝ – A B C D E – – – $3.55 1-2413-17 2.23˝ – A B C D E – – – $3.70 1-2413-18 2.35˝ – A B C D E – – – $3.95 1-2413-19 2.47˝ – A B C – E – – – $4.20 1-2413-20 2.59˝ – A B C – E – – – $4.60 1-2413-21 2.71˝ – A B C – E – – – $5.10 1-2413-22 2.83˝ – A B C – E – – – $5.35 1-2413-23 2.95˝ – A B C – E – – – $5.70 1-2413-24 3.07˝ – A B C – E – – – $6.00 1-2413-25 3.19˝ – A B C – E – – – $6.30 1-2413-26 3.31˝ – – B C D E F G H $7.00 1-2413-27 3.43˝ – – B C D E F G H $8.00 1-2413-28 3.55˝ – – B C D E F G H $8.35 1-2413-29 3.68˝ – – B C D E F G H $9.00 1-2413-30 3.79˝ – – B C D E F G H $9.30 1-2413-32 4.03˝ – – B C D E F G H $10.95 1-2413-35 4.39˝ – – B C D E F G H $12.95 1-2413-36 4.51˝ – – B C D E F G H $12.95 1-2413-40 4.99˝ – – B C D E F G H $14.95 1-2413-42 5.23˝ – – B C D E F G H $15.95 1-2413-45 5.59˝ – – B C D E F G H $17.95 1-2413-48 5.95˝ – – B C D E F G H $18.95 1-2413-54 6.66˝ – – B C D E F G H $20.95 1-2413-60 7.38˝ – – – C D E F G H $23.95 1-2413-72 8.81˝ – – – C D E F G H $29.95

40 Pitch Finished BoresITEM - Teeth OD ½˝ ⅝˝ ¾˝ ⅞˝ 1˝ 1⅛˝ 13/16˝ 1¼˝ 1⅜˝ 17/16˝ 1½˝ Price 1-2123-10 1.84˝ A B C – – – – – – – – $4.00 1-2123-11 2.00˝ A B C D – – – – – – – $4.00 1-2123-12 2.17˝ A B C D – – – – – – $4.00 1-2123-13 2.33˝ A B C D E – – – – – – $4.00 1-2123-14 2.49˝ A B C D E F G – – – – $4.20 1-2123-15 2.65˝ A B C D E F G H – – – $5.10 1-2123-16 2.81˝ – B C D E F G H – – – $5.35 1-2123-17 2.98˝ – B C D E F G H – – – $6.00 1-2123-18 3.14˝ – B C D E F G H I J K $6.30 1-2123-19 3.30˝ – B C D E F G H I J K $6.55 1-2123-20 3.46˝ – B C D E F G H I J K $7.00 1-2123-21 3.62˝ – B C – E F G H I J K $7.20 1-2123-22 3.78˝ – B C D E F G H I J K $7.60 1-2123-23 3.94˝ – B C D E F G H I J K $8.00 1-2123-24 4.10˝ – B C D E F G H I J K $8.75 1-2123-25 4.26˝ – – C D E F G H – J K $9.45 1-2123-26 4.42˝ – – C D E F G H – J K $9.65 1-2123-27 4.58˝ – – C D E F G H – – K $9.85 1-2123-28 4.74˝ – – C D E F G H – J K 10.95 1-2123-29 4.90˝ – – C D E F G H – – K 11.95 1-2123-30 5.06˝ – – C D E F G H – – K 11.95

Shipping Weights10-15 Teeth 1 lb. 16-25 Teeth 2 lbs. 26-72 Teeth 3 lbs.

Idler Sprockets• Brand new. Cast steel idler sprockets.Sealed ball bearings.

ITEM Pitch Bore Teeth O.D. Shpg. Price 1-2408-18-A 35 ½˝ 18 2.35˝ ½ $7.10 1-2408-18-B 35 ⅝˝ 18 2.35˝ ½ $7.10 1-2409-17-A 40 ½˝ 17 2.98˝ 1¼ $9.00 1-2409-17-B 40 ⅝˝ 17 2.98˝ 1¼ $9.00 1-2410-13-A 50 ½˝ 13 2.91˝ 1¼ $9.25 1-2410-13-B 50 ⅝˝ 13 2.91˝ 1¼ $9.25 1-2410-15-A 50 ½˝ 15 3.32˝ 1¾ $10.00 1-2410-15-B 50 ⅝˝ 15 3.32˝ 1¾ $10.00 1-2410-17-A 50 ½˝ 17 3.72˝ 2 $10.95 1-2410-17-B 50 ⅝˝ 17 3.72˝ 2 $10.95 1-2411-11-A 60 ½˝ 11 3.00˝ 1¼ $10.00 1-2411-11-B 60 ⅝˝ 11 3.00˝ 1¼ $10.00 1-2411-13-A 60 ½˝ 13 3.49˝ 1¾ $10.95 1-2411-13-B 60 ⅝˝ 13 3.49˝ 1¾ $10.95 1-2923-13-A 60 ½˝ 13 3.49˝ 1 $7.49 1-2411-15-A 60 ½˝ 15 3.98˝ 3 $12.00 1-2411-15-B 60 ⅝˝ 15 3.98˝ 3 $12.00 1-2412-11-C 80 ¾˝ 11 4.01˝ 3 $17.95 1-2412-12-C 80 ¾˝ 12 4.33˝ 4 $17.95 1-2412-12-E 80 1˝ 12 4.33˝ 4 $17.95

25 PitchRoller Chain Sprockets

• Brand new ANSI standard sprockets. Fin-ished, unkeyed bore with two set screws.• Select an ITEM number from chart accord-ing to number of teeth and add suffix letter forbore size.

Example: ITEM 1-2742-10-A is a 25 pitch sprocket with 10 teethand ¼˝ bore. Finished BoresITEM - Teeth OD ¼˝ 5/16˝ ⅜˝ ½˝ ⅝˝ ¾˝ Shpg. Price 1-2742-9 0.84˝ A – – – – – ⅛ lb. $2.95 1-2742-10 0.92˝ A – – – – – ⅛ lb. $2.35 1-2742-11 0.99˝ A B – – – – ⅛ lb. $2.55 1-2742-12 1.08˝ A B C – – – ⅛ lb. $2.70 1-2742-13 1.17˝ A B C – – – ⅛ lb. $2.85 1-2742-14 1.24˝ A B C D – – ¼ lb. $2.85 1-2742-15 1.33˝ A B C D – – ¼ lb. $2.95 1-2742-16 1.41˝ A B C D – – ¼ lb. $3.20 1-2742-17 1.49˝ A B C D E – ¼ lb. $3.35 1-2742-18 1.57˝ A B C D E F ¼ lb. $3.60 1-2742-19 1.65˝ A B C D E F ¼ lb. $3.80 1-2742-20 1.73˝ A B C D E F ½ lb. $4.20 1-2742-21 1.81˝ A B C D E F ½ lb. $5.00 1-2742-22 1.89˝ A B C D E F ½ lb. $5.00 1-2742-23 1.97˝ A B C D E F ½ lb. $5.30 1-2742-24 2.05˝ – – C D E F ½ lb. $6.00 1-2742-25 2.13˝ – – C D E F ½ lb. $6.00 1-2742-26 2.21˝ – – C D E F ½ lb. $6.45 1-2742-28 2.37˝ – – C D E F ½ lb. $7.60 1-2742-30 2.53˝ – – C D E F ½ lb. $8.50 1-2742-32 2.69˝ – – C D E F ¾ lb. $9.50 1-2742-35 2.94˝ – – C D E F ¾ lb. $11.95 1-2742-36 3.01˝ – – C D E F ¾ lb. $11.95 1-2742-40 3.33˝ – – – D E F 1¼ lb. $13.95 1-2742-42 3.51˝ – – – D E F 1¼ lb. $13.95 1-2742-45 3.73˝ – – – D E F 1¼ lb. $15.95 1-2742-48 3.96˝ – – – D E F 1¼ lb. $16.95 1-2742-54 4.44˝ – – – D E F 1½ lb. $18.95 1-2742-60 4.92˝ – – – D E F 2 lb. $21.95 1-2742-72 5.72˝ – – – D E F 3 lb. $27.95

800-488-3407 Roller Chain & Unfinished Bore Sprockets 111&

60 Pitch Finished BoresITEM - Teeth OD ¾˝ ⅞˝ 1˝ 1⅛˝ 13/16˝ 1¼˝ 1⅜˝ 17/16˝ 1½˝ 1⅝˝ 1¾˝ 1⅞˝ 115/16˝ 2˝ Shpg. Price 1-2125-10 2.76˝ C D E F G H – – – – – – – – 1¼ lb. $6.40 1-2125-11 3.00˝ C D E F G H – – – – – – – – 1¼ lb. $6.55 1-2125-12 3.25˝ C D E F G H – J – – – – – – 1¾ lb. $7.00 1-2125-13 3.49˝ C D E F G H I J K – – – – – 1¾ lb. $7.40 1-2125-14 3.74˝ C D E F G H I J K – – – – – 2 lb. $8.00 1-2125-15 3.98˝ C D E F G H I J K L M – – – 2 lb. $9.10 1-2125-16 4.22˝ C D E F G H I J K L M – O – 3 lb. $10.95 1-2125-17 4.46˝ – – E F G H I J K L M – O – 3 lb. $11.95 1-2125-18 4.70˝ – – E F G H I J K L M N O – 3 lb. $12.95 1-2125-19 4.95˝ – – E F G H I J K L M N O – 4 lb. $13.95 1-2125-20 5.19˝ – – E F G H I J K L M N O – 4 lb. $15.95 1-2125-21 5.43˝ – – E F G H I J K L M N O – 5 lb. $16.95 1-2125-22 5.67˝ – – E F G H – J K L M N O P 5 lb. $17.95 1-2125-23 5.91˝ – – E F G H I J K L M N O – 6 lb. $18.95 1-2125-24 6.15˝ – – E F G H I J K L M N O P 6 lb. $18.95 1-2125-26 6.63˝ – – E F G H I J K L M N O P 6 lb. $20.95 1-2125-27 6.87˝ – – E F G H I J K L M N O – 7 lb. $21.95 1-2125-28 7.11˝ – – E F G H I J K L M N O P 7 lb. $22.95 1-2125-30 7.59˝ – – E F G H I J K L M N O – 8 lb. $25.95 1-2125-32 8.07˝ – – E F G H I J K L M N O P 9 lb. $27.95 1-2125-35 8.78˝ – – E F G H I J K L M N O P 10 lb. $33.9580 Pitch Finished BoresITEM - Teeth OD ¾˝ ⅞˝ 1˝ 1⅛˝ 13/16˝ 1¼˝ 1⅜˝ 17/16˝ 1½˝ 1⅝˝ 1¾˝ 1⅞˝ 115/16˝ 2˝ Shpg. Price 1-2145-10 3.68˝ – – E F G H – – K – – – – – 2 lb. $11.95 1-2145-11 4.01˝ – – E F G H – J K – – – – – 3 lb. $12.95 1-2145-12 4.33˝ – – E F G H I J K L M – – – 4 lb. $13.95 1-2145-13 4.66˝ – – E F G H I J K L M – – P 4 lb. $14.95 1-2145-14 4.98˝ – – E F G H I J K L M N – P 5 lb. $15.95 1-2145-15 5.30˝ – – E F G H I J K L M – – P 6 lb. $18.95 1-2145-16 5.63˝ – – E F G H I J K L M N – P 6 lb. $20.95 1-2145-17 5.95˝ – – E F G H I J K L M N O P 7 lb. $21.95 1-2145-18 6.27˝ – – E F G H I J K L M N O P 8 lb. $23.95 1-2145-19 6.59˝ – – E F G H I J K L M N O P 8 lb. $26.95 1-2145-20 6.91˝ – – E F G H I J K L M N O P 9 lb. $33.00 1-2145-22 7.58˝ – – – – – – – – – – – – – P 9 lb. $39.00

Roller Chain Sprockets• Brand new ANSI standard sprockets. Finished, keyed bore tappedfor set screw (not included). Carbon steel with heat-treated teeth.• Select an ITEM number for sprocket from chart according to chainpitch, number of teeth and add suffix letter according to bore size.Example: ITEM 1-2123-10-A = 40 pitch sprocket, 10 teeth, ½˝ bore.50 Pitch Finished BoresITEM - Teeth OD ⅝˝ ¾˝ ⅞˝ 1˝ 1⅛˝ 13/16˝ 1¼˝ 1⅜˝ 17/16˝ 1½˝ 1⅝˝ Shpg. Price 1-2124-10 2.30˝ B C D E – – – – – – – ¾ lb. $5.05 1-2124-11 2.50˝ B C D E – – – – – – – 1 lb. $5.30 1-2124-12 2.71˝ B C D E F G H – – – – 1 lb. $6.00 1-2124-13 2.91˝ B C D E F G H – – – – 1¼ lb. $6.00 1-2124-14 3.11˝ B C D E F G H – – – – 1½ lb. $6.15 1-2124-15 3.32˝ B C D E F G H I J K – 1¾ lb. $6.35 1-2124-16 3.52˝ B C D E F G H I J K – 2 lb. $7.35 1-2124-17 3.72˝ B C D E F G H I J K – 2 lb. $8.00 1-2124-18 3.92˝ B C D E F G H I J K – 3 lb. $8.10 1-2124-19 4.12˝ B C D E F G H I J K L 3 lb. $8.50 1-2124-20 4.32˝ – – D E F G H I J K – 3 lb. $9.00 1-2124-21 4.52˝ – C D E F G H I J K – 3 lb. $9.30 1-2124-22 4.72˝ – C D E F G H I J K – 3 lb. $9.60 1-2124-23 4.92˝ – C D E F G H I J K – 3 lb. $10.00 1-2124-24 5.12˝ – C D E F G H I J K – 4 lb. $11.95 1-2124-25 5.32˝ – C D E F G H I J K – 4 lb. $12.95 1-2124-26 5.52˝ – C D E F G H I J K – 4 lb. $12.95 1-2124-27 5.72˝ – C D E F G H I J K – 4 lb. $13.95 1-2124-28 5.92˝ – C D E F G H I J K – 4 lb. $14.95 1-2124-30 6.32˝ – C D E F G H I J K – 5 lb. $15.95 1-2124-34 7.12˝ – C D E F G H I J K – 6 lb. $20.95 1-2124-40 8.32˝ – C D E F G H I J K – 7 lb. $24.95

Unfinished BoreSprockets• New. Hub can be ma -chined to desired boresize. No keyway orsetscrews.

35 Pitch ITEM # TeethO.D. Bore Shpg. Price1-2819-25 25 3.19˝ ½˝ 1½ lbs. $3.751-2819-27 27 3.43˝ ½˝ 1½ lbs. $4.501-2550 65 8.00˝ ⅝˝ 3 lbs.$12.75

40 Pitch ITEM # TeethO.D. Bore Shpg. Price1-2820-11 11 2.00˝ ½˝ ½ lb. $3.001-2820-14 14 2.49˝ ½˝ ¾ lb. $3.001-2820-16 16 2.81˝ ⅝˝ 1 lb. $3.751-2820-18 18 3.14˝ ⅝˝ 1½ lbs. $3.751-2820-19 19 3.30˝ ⅝˝ 1½ lbs. $4.501-2820-21 21 3.62˝ ⅝˝ 2 lbs. $4.501-2820-26 26 4.42˝ ⅝˝ 3 lbs. $6.00

50 Pitch ITEM # TeethO.D. Bore Shpg. Price1-2124-10-UC 10 2.30˝ ¾˝ ½ lb. $3.001-2124-11-UC 11 2.50˝ ¾˝ 1 lb. $4.001-2821-12 12 2.71˝ ⅝˝ 1 lb. $4.001-2124-12-UC 12 2.71˝ ¾˝ 1 lb. $4.001-2821-14 14 3.12˝ ⅝˝ 1½ lbs. $4.001-2821-15 15 3.32˝ ⅝˝ 1½ lbs. $4.001-2821-17 17 3.72˝ ⅝˝ 2 lbs. $4.501-2821-18 18 3.92˝ ⅝˝ 3 lbs. $5.251-2821-22 22 4.72˝ ¾˝ 3 lbs. $6.001-2821-23 23 4.92˝ ¾˝ 3 lbs. $6.001-2821-24 24 5.13˝ ¾˝ 4 lbs. $6.751-2821-30 30 6.32˝ ¾˝ 5 lbs. $9.00

60 Pitch ITEM # TeethO.D. Bore Shpg. Price1-2822-16 16 4.22˝ ¾˝ 4 lbs. $6.001-2125-42-UJ 42 10.5˝ 17/16˝ 12 lbs.$27.00

1˝ Bore 50PSprockets• New roller chainsprocket with cen-tered hub. Fits onto1˝ shaft, does nothave keyway orsetscrew.

ITEM 1-3087-13 $1.49SPECIFICATIONS • Hub dia. 1¾˝• Teeth 13 • Hub width 1˝• Pitch 50 • O.D 2.91˝• Bore 1˝ • Shpg. 1 lbs.

ITEM 1-3087-19 $1.79SPECIFICATIONS • Hub dia. 2½˝• Teeth 19 • Hub width 1˝• Pitch 50 • O.D 4.13˝• Bore 1˝ • Shpg. 2 lbs.

ITEM 1-3087-25 $1.99SPECIFICATIONS • Hub dia. 2½˝• Teeth 25 • Hub width 1˝• Pitch 50 • O.D 5.33˝• Bore 1˝ • Shpg. 3 lbs.

112 Roller Chain & Links www.surpluscenter.com8

Roller Chain Breakers

ITEM 14-1037$17.99

• Easily dismantle roller chain without usinghammer or punch. Replaceable tip workswith 25 to 60 pitch chain. Shpg. 1 lb.

ITEM 14-1037-2 $34.95• For 60 to 100 pitch chain. Shpg. 3 lbs.

35-60 PitchRoller ChainHolder

ITEM 14-1114$12.95• Brand new. Holds two ends of a lengthof roller chain together so connecting linkcan be inserted.SPECIFICATIONS• Compatible chain 35-60 pitch • Shpg. 1 lb.

1 StrandITEM Pitch Lgth. Type Shpg. Price

1-2651 35 43˝ R 1½ lbs. $ 2.951-1163-35-NP 35 10 ft. R 3 lbs. $ 34.991-1163-35-NP-100 35 100 ft. R 28 lbs. $279.951-1163-35-300 35 300 ft. R 71 lbs. $311.951-2549 41 27˝ R 1 lbs. $ 3.951-1163-41 41 10 ft. R 5 lbs. $ 15.991-1163-41-300 41 300 ft. R 95 lbs. $335.951-1163-50-200-H 50 200 ft. R 151 lbs. $399.951-1873-A 65 (43) 33˝ R 1 lbs. $ 1.951-1873-B 65 (43) 71˝ R 2 lbs. $ 4.951-1941 65 (43) 246˝ R 6 lbs. $ 17.951-2503 80 47˝ R 9 lbs. $ 14.951-3132-R 80 75˝ R 13 lbs. $ 28.951-2981 80 102˝ R 17 lbs. $ 34.991-1163-80-H-6 80 6 ft. R 14 lbs. $ 19.99


1-1163-35-2 35 10 ft. R 5 lbs. $ 14.991-1163-35-2-NP 35 10 ft. R 5 lbs. $ 34.991-1163-35-2-NP-50 35 50 ft. R 28 lbs. $139.951-1163-35-2-100 35 100 ft. R 53 lbs. $119.951-1163-35-2-200 35 200 ft. R 94 lbs. $239.951-1163-40-2-100 40 100 ft. R 98 lbs. $159.95


1-1163-120-3 120 10 ft. C 130 lbs. $ 49.99

Roller Chain Lengths• New, ANSI standard roller chain in various lengths. More sizes online online!

Type R = Riveted C = CotteredSuffix letter in ITEM number indicates construction.

vNP = Nickel plated H = Heavy Duty SS = Stainless Steel Riveted

Roller Chain & Links• Brand new, roller chain. Meets all ANSI standards. Available in 10 ft boxes in standard, heavy (thicker side plates) and double strandstyles. One connecting link included in each box to make into a continuous loop.• Connecting links are spring clip style except for100 and 120 chain that use cotter pins to retain side plate.

Single Roller Chain & LinksUltimate 10 Ft. Box Connecting Link Offset (half) Link

Pitch (Size) Strength ITEM Shpg. Price ITEM Shpg. Price ITEM Shpg. Price25 ( ¼˝ ) 925 lbs. 1-1163-25 2 lbs. $14.99 1-1087-25 0.1 lb. $ .65 1-1086-25 0.1 lb. $ .7535 ( ⅜˝ ) 2100 lbs. 1-1163-35 3 lbs. $14.99 1-1087-35 0.1 lb. $ .35 1-1086-35 0.1 lb. $ .7540 ( ½˝ ) 3700 lbs. 1-1163-40 5 lbs. $14.99 1-1087-40 0.1 lb. $ .40 1-1086-40 0.1 lb. $ .7550 ( ⅝˝ ) 6100 lbs. 1-1163-50 7 lbs. $19.99 1-1087-50 0.1 lb. $ .50 1-1086-50 0.1 lb. $ .9060 ( ¾˝ ) 8500 lbs. 1-1163-60 10 lbs. $26.99 1-1087-60 0.1 lb. $ .65 1-1086-60 0.1 lb. $1.1580 ( 1˝ ) 14,500 lbs. 1-1163-80 18 lbs. $45.99 1-1087-80 0.1 lb. $1.20 1-1086-80 0.1 lb. $2.15100 ( 1¼˝ ) 24,000 lbs. 1-1163-100 31 lbs. $79.99 1-1087-100 0.3 lb. $2.15 1-1086-100 0.3 lb. $3.99120 ( 1½˝ ) 34,000 lbs. 1-1163-120 42 lbs. $124.99 1-1087-120 0.3 lb. $3.20 1-1086-120 0.3 lb. $5.49

Heavy Single Roller Chain & LinksUltimate 10 Ft. Box Connecting Link Offset (half) Link

Pitch (Size) Strength ITEM Shpg. Price ITEM Shpg. Price ITEM Shpg. Price50H ( ⅝˝ ) 6100 lbs. 1-1163-50-H $27.99 1-1087-50-H 0.1 lb. $ .90 1-1086-50-H 0.1 lb. $1.5060H ( ¾˝ ) 8500 lbs. 1-1163-60-H $39.99 1-1087-60-H 0.1 lb. $1.00 1-1086-60-H 0.1 lb. $1.7580H ( 1˝ ) 14,500 lbs. 1-1163-80-H $65.99 1-1087-80-H 0.1 lb. $1.90 1-1086-80-H 0.1 lb. $2.85

Double Roller Chain & LinksUltimate 10 Ft. Box Connecting Link Offset (half) Link

Pitch (Size) Strength ITEM Shpg. Price ITEM Shpg. Price ITEM Shpg. Price40-2 ( ½˝ ) 8400 lbs. 1-1163-40-2 12 lbs. $28.99 1-1087-40-2 0.25 lb. $ .95 1-1086-40-2 0.25 lb. $1.4950-2 ( ⅝˝ ) 14,000 lbs. 1-1163-50-2 18 lbs. $46.99 1-1087-50-2 0.25 lb. $ .99 1-1086-50-2 0.25 lb. $1.6960-2 ( ¾˝ ) 19,400 lbs. 1-1163-60-2 25 lbs. $64.99 1-1087-60-2 0.25 lb. $1.60 1-1086-60-2 0.25 lb. $1.9580-2 ( 1˝ ) 29,000 lbs. 1-1163-80-2 39 lbs. $99.99 1-1087-80-2 0.25 lb. $2.70 1-1086-80-2 0.25 lb. $3.89

& 800-488-3407 Shafting, Lead Screws & U-joints 113

Square ShaftITEM 1-3524$39.95• Brand new, square shafting. Drivelineshafting grade steel.SPECIFICATIONS • Length 72˝• Size ⅞˝ square • Shpg. 17 lbs.

Keyed Shafting

• Brand new. 36˝ or 72˝ lengths of C1018 cold-drawn steel, full length keyway.

3 ft. Lengths 6 ft. Lengths O.D. Keyway ITEM Shpg. Price ITEM Shpg. Price ½˝ ⅛˝ x 1/16˝ 1-2982-50-3 3 lbs. $19.95 1-2982-50-6 6 lbs. $39.95 ⅝˝ 3/16˝ x 3/32˝ 1-2982-62-3 4 lbs. $22.95 1-2982-62-6 8 lbs. $45.95 ¾˝ 3/16˝ x 3/32˝ 1-2982-75-3 6 lbs. $26.95 1-2982-75-6 12 lbs. $53.95 ⅞˝ 3/16˝ x 3/32˝ 1-2982-87-3 7 lbs. $30.95 1-2982-87-6 14 lbs. $61.95 1˝ ¼˝ x ⅛˝ 1-2982-100-3 9 lbs. $33.95 1-2982-100-6 18 lbs. $67.95 1⅛˝ ¼˝ x ⅛˝ 1-2982-112-3 12 lbs. $37.95 1-2982-112-6 24 lbs. $75.95 1¼˝ ¼˝ x ⅛˝ 1-2982-125-A-3 14 lbs. $43.95 1-2982-125-A-6 28 lbs. $87.95 1¼˝ 5/16˝ x ⅛˝ 1-2982-125-B-3 14 lbs. $54.95 1-2982-125-B-6 28 lbs. $109.95 1⅜˝ 5/16˝ x 5/32˝ 1-2982-137-3 16 lbs. $49.95 1-2982-137-6 32 lbs. $99.95 1½˝ ⅜˝ x 3/16˝ 1-2982-150-3 19 lbs. $58.95 1-2982-150-6 38 lbs. $117.95

Lead Screws & Nuts• Brand new, G & G MFG. ACME lead screws and nuts (sold separately). 36˝ or 72˝lengths of 1010/1018 class 2G rolled threads. Plain finish. Right-hand thread. Hex nutsfor ACME lead screws. 12L14 screw stock. Plain finish.

3 ft. Screws 6 ft. Screws Nuts Size & Pitch ITEM Shpg. Price ITEM Shpg. Price ITEM Shpg. Price ½˝-10 1-2983-50-3 3 lbs. $9.35 1-2983-50-6 5 lbs. $16.95 1-2984-50N ¼ lb. $3.45 ¾˝-6 1-2983-75-3 5 lbs. $16.95 1-2983-75-6 10 lbs. $29.95 1-2984-75N ¼ lb. $5.60 1˝-4 1-2983-100-3 7 lbs. $27.95 1-2983-100-6 14 lbs. $52.95 1-2984-100N ½ lb. $9.15 1¼˝-5 1-2983-125-3 12 lbs. $46.95 1-2983-125-6 24 lbs. $92.95 1-2984-125N 1 lb. $11.95

UniversalJoints

• Brand new. Cold-formed, carbon steel yokes. Greasezerk for the bearings. HP at Yoke Width ITEM Bore Series Bearings Cross Dia 540 RPM 1000 RPM Inside Outside Size Shpg Price 1-2728 1˝ 4P Journal ⅞˝ 5 9 123/64˝ 1⅞˝ 4⅞˝ x 2˝ x 2˝ 4 lbs. $32.95 1-2729 ¾˝ 6N Needle 31/32˝ 12 22 17/16˝ 2¼˝ 5˝ x 2¼˝ x 2¼˝ 4 lbs. $37.95 1-2730 1˝ 6N Needle 31/32˝ 12 22 17/16˝ 2¼˝ 5˝ x 2¼˝ x 2¼˝ 5 lbs. $37.95 1-2731 1˝ 12N Needle 11/16˝ 28 52 113/16˝ 2½˝ 7˝ x 2⅞˝ x 2⅞˝ 6 lbs. $54.95 1-2732 1¼˝ 12N Needle 11/16˝ 28 52 113/16˝ 2½˝ 7˝ x 2⅞˝ x 2⅞˝ 6 lbs. $51.95

HexShafting

• Brand new, hex shafting. Driveline shaft-ing grade steel.

HexITEM Size Lgth. Shpg. Price

1-3525-87 ⅞˝ 72˝ 14 lbs. $29.951-3525-112 1⅛˝ 72˝ 23 lbs. $44.95

6T 14T 15T 21T1-3442 1-3092 1-3090 1-3091

Splined Shafts

• Brand new, G & G Mfg. Black oxide finished steel.Spline Spline Overall Overall Retention

ITEM Model Spline Location Lgth. Lgth. O.D. Groove Inset Shpg. Price1-3092-6 106A1615 1˝ 15T One end 3˝ 6˝ 1˝ 1˝ 3 lbs. $23.951-3092-12 112A1615 1˝ 15T One end 2¾˝ 12˝ 1˝ 1˝ 4 lbs. $26.951-3091 112B1615 1˝ 15T Both ends 2¾˝ 12˝ 1˝ 1˝ 4 lbs. $31.951-3090 112F1615 1˝ 15T Full 12˝ 12˝ 1˝ – 4 lbs. $49.951-3442 106A2014 1¼˝ 14T One end 2⅝˝ 6˝ 1¼˝ – 4 lbs. $13.951-2935-6 106A2206 1⅜˝ 6T One end 3˝ 6˝ 1⅜˝ ⅞˝ 4 lbs. $17.951-2935-12 112A2206 1⅜˝ 6T One end 2¾˝ 12˝ 1⅜˝ ⅞˝ 7 lbs. $30.951-2937-6 112B2206 1⅜˝ 6T Both ends 2¾˝ 12˝ 1⅜˝ ⅞˝ 7 lbs. $36.951-2938-6 112F2206 1⅜˝ 6T Full 12˝ 12˝ 1⅜˝ – 7 lbs. $58.951-2936-6 106A2221 1⅜˝ 21T One end 2¾˝ 6˝ 1⅜˝ ⅞˝ 4 lbs. $18.951-2936-12 112A2221 1⅜˝ 21T One end 2¾˝ 12˝ 1⅜˝ ⅞˝ 7 lbs. $33.951-2937-21 112B2221 1⅜˝ 21T Both ends 2¾˝ 12˝ 1⅜˝ ⅞˝ 7 lbs. $38.951-2938-21 112F2221 1⅜˝ 21T Full 12˝ 12˝ 1⅜˝ – 7 lbs. $69.95

114 Shaft Collars & Splined Hitch Adapters www.surpluscenter.com8

110mm CamFollower

ITEM 1-3566$32.99• New, steel ball bearing cam follower withstud. Lubrication groove in bearing surfaceof mount.SPECIFICATIONS • Mounting stud• Roller 1⅜˝ dia. x 2¾˝110mm (4.33˝) dia. x 2˝ • Size 4.33˝ diam. x 4¾˝• Mtg. lgth. on hub 1⅛˝ • Shpg. 11 lbs.

Steel Shaft CollarITEM 1-2460-179¢• New steel shaft collar with set screw. Fitsonto 1˝ diam. shaft, held in place with setscrew. 1¼˝ diam. recessed face is 0.15˝ deep.Size 1½˝ O.D. x 0.53˝ thick. Shpg. ¼ lb.

Tractor PTOAdapterITEM 1-1655$35.95• New. Use to connect hydraulic or waterpumps direct to tractor PTO.SPECIFICATIONS• Splined end 1⅜˝ 6 tooth spline, 2½˝ deep• Keyed end ⅞˝ dia. x 2½˝ deep, 3/16˝ keyway• Overall size 1¾˝ dia. x 5˝ • Shpg. 3 lbs.

Snap Hitch PumpAdapters

$39.95 ea.• Brand new G & G. Snap hitch adapters.Slides onto standard 1⅜˝ splined PTOshaft and spring-loaded retention pinholds adapter onto PTO shaft retentiongroove. Painted steel construction. Size4⅛˝ x 2½˝ x 2⅛˝. Shpg. 4 lbs. ITEM # ITEM # 6T 21T Round Bore Keyway

1-2455 1-2462 ⅝˝ 3/16˝ 1-2456 1-2465 ¾˝ 3/16˝ 1-2457 1-2466 ⅞˝ 3/16˝ & ¼˝ 1-2458 1-2467 15/16˝ ¼˝ 1-2459 1-2468 1˝ ¼˝

Splined PTOAdapters

• Brand new, G & G Mfg. Co. Adapts keyedshaft to 1⅜˝ 6 tooth spline. Shpg 4 lbs. Female ITEM Bore Size Price 1-2241 1˝ 2˝ diam. x 5¾˝ $27.95 1-2242 1¼˝ 2˝ diam. x 5⅞˝ $27.95 1-2970 1½˝ 2¼˝ diam. 5⅞˝ $33.95

Steel Shaft Collars• Brand new. Solid collars include a set screw, split collars include clamping screws.

Choose from three collar styles.

Solid Single Split Double Split Shaft Shaft Shaft Collars Collars Collars Zinc Plated Black Oxide Finish Black Oxide Finish

ITEM Bore O.D. Width Price ITEM Bore O.D. Width Price ITEM Bore O.D. Width Price Shpg.1-2766-18 3/16˝ 7/16˝ ¼˝ $ .65 1-2767-18 3/16˝ ⅝˝ 5/16˝ $2.30 1-2768-18 3/16˝ ⅝˝ 5/16˝ $3.75 0.1 lb.1-2766-25 ¼˝ ½˝ 5/16˝ $ .70 1-2767-25 ¼˝ 11/16˝ 5/16˝ $2.20 1-2768-25 ¼˝ 11/16˝ 5/16˝ $3.75 0.1 lb.1-2766-31 5/16˝ ⅝˝ 5/16˝ $ .85 1-2767-31 5/16˝ 11/16˝ 5/16˝ $2.30 1-2768-31 5/16˝ 11/16˝ 5/16˝ $3.75 0.1 lb.1-2766-37 ⅜˝ ¾˝ ⅜˝ $ .95 1-2767-37 ⅜˝ ⅞˝ 11/32˝ $2.45 1-2768-37 ⅜˝ ⅞˝ 11/32˝ $3.85 0.1 lb.1-2766-43 7/16˝ ⅞˝ 7/16˝ $1.05 1-2767-43 7/16˝ 15/16˝ ⅜˝ $2.45 1-2768-43 7/16˝ 15/16˝ ⅜˝ $3.90 0.1 lb.1-2766-50 ½˝ 1˝ 7/16˝ $1.20 1-2767-50 ½˝ 1⅛˝ 13/32˝ $2.45 1-2768-50 ½˝ 11/8˝ 13/32˝ $4.05 0.1 lb.1-2766-62 ⅝˝ 1⅛˝ ½˝ $1.35 1-2767-62 ⅝˝ 15/16˝ 7/16˝ $2.75 1-2768-62 ⅝˝ 15/16˝ 7/16˝ $5.00 0.1 lb.1-2766-75 ¾˝ 1¼˝ 9/16˝ $1.55 1-2767-75 ¾˝ 1½˝ ½˝ $2.95 1-2768-75 ¾˝ 1½˝ ½˝ $5.00 0.1 lb.1-2766-87 ⅞˝ 1½˝ 9/16˝ $1.80 1-2767-87 ⅞˝ 1⅝˝ ½˝ $3.45 1-2768-87 ⅞˝ 1⅝˝ ½˝ $5.00 0.2 lb.1-2766-93 15/16˝ 1½˝ 9/16˝ $1.80 1-2767-93 15/16˝ 1¾˝ ½˝ $3.90 1-2768-93 15/16˝ 1¾˝ ½˝ $5.35 0.2 lb.1-2766-100 1˝ 1⅝˝ ⅝˝ $2.25 1-2767-100 1˝ 1¾˝ ½˝ $3.70 1-2768-100 1˝ 1¾˝ ½˝ $5.00 0.3 lb.1-2766-112 1⅛˝ 1¾˝ ⅝˝ $2.65 1-2767-112 1⅛˝ 1⅞˝ ½˝ $3.70 1-2768-112 1⅛˝ 1⅞˝ ½˝ $5.00 0.4 lb.1-2766-118 13/16˝ 2˝ 11/16˝ $2.20 1-2767-118 13/16˝ 21/16˝ ½˝ $4.15 1-2768-118 13/16˝ 21/16˝ ½˝ $6.00 0.4 lb.1-2766-125 1¼˝ 2˝ 11/16˝ $2.20 1-2767-125 1¼˝ 21/16˝ ½˝ $3.90 1-2768-125 1¼˝ 21/16˝ ½˝ $6.00 0.5 lb.1-2766-137 1⅜˝ 2⅛˝ ¾˝ $2.60 1-2767-137 1⅜˝ 2¼˝ 9/16˝ $5.00 1-2768-137 1⅜˝ 2¼˝ 9/16˝ $6.00 0.6 lb.1-2766-143 17/16˝ 2¼˝ ¾˝ $2.75 1-2767-143 17/16˝ 2¼˝ 9/16˝ $5.00 1-2768-143 17/16˝ 2¼˝ 9/16˝ $6.00 0.6 lb.1-2766-150 1½˝ 2¼˝ ¾˝ $2.60 1-2767-150 1½˝ 2⅜˝ 9/16˝ $5.30 1-2768-150 1½˝ 2⅜˝ 9/16˝ $6.00 0.6 lb.1-2766-162 1⅝˝ 2½˝ 13/16˝ $3.50 1-2767-162 1⅝˝ 2⅝˝ 11/16˝ $6.00 1-2768-162 1⅝˝ 2⅝˝ 11/16˝ $7.00 0.7 lb.1-2766-168 111/16˝ 2½˝ 13/16˝ $3.25 1-2767-168 111/16˝ 2¾˝ 11/16˝ $7.00 1-2768-168 111/16˝ 2¾˝ 11/16˝ $8.00 0.7 lb.1-2766-175 1¾˝ 2¾˝ ⅞˝ $5.00 1-2767-175 1¾˝ 2¾˝ 11/16˝ $7.00 1-2768-175 1¾˝ 2¾˝ 11/16˝ $8.00 0.8 lb.1-2766-187 1⅞˝ 2¾˝ ⅞˝ $5.00 1-2767-187 1⅞˝ 2⅞˝ 11/16˝ $7.00 1-2768-187 1⅞˝ 2⅞˝ 11/16˝ $8.00 0.8 lb.1-2766-193 115/16˝ 3˝ ⅞˝ $5.00 1-2767-193 115/16˝ 3˝ 11/16˝ $7.00 1-2768-193 115/16˝ 3˝ 11/16˝ $9.00 0.9 lb.1-2766-200 2˝ 3˝ ⅞˝ $5.00 1-2767-200 2˝ 3˝ 11/16˝ $7.00 1-2768-200 2˝ 3˝ 11/16˝ $9.00 0.9 lb.

Double RollerChainCoupler

$29.99 each• Brand new. Three piece chain couplerconsists of two sprockets connected to-gether with double roller chain. Furnishedwith standard keyway and setscrews.SPECIFICATIONS• Chain size 50 pitch • Torque 200 lb.ft. max.• Sprocket teeth 16 • Size 3¾˝ dia. x 3¼˝• Speed 4000 RPM max. • Shpg 6 lbs.• Individually specify the shaft size for eachend by adding the suffix letter for bore size.Example: ITEM 1-3560-B-G is a couplerpair with ¾˝ and 1⅜˝ bore sizes.

ITEM 1-3560-®-®Bore Size Options

Suffix Bore Suffix Bore Suffix BoreA ⅝˝ B ¾˝ C ⅞˝D 1˝ E 1⅛˝ F 1¼˝G 1⅜˝ H 1½˝ I 1⅝˝


Solid Shaft Couplers• Brand new. Rigid steel couplers for connecting shafts together. Madefrom cold rolled steel. Keyed couplers have keyway slot and 2 set screws.

Keyed Shaft Couplers Spline Shaft Couplers

800-488-3407 Flexible & Spine Couplings 115&

3 Piece Flexible & Spline Couplings• Brand new, 3-piece flexible couplings. Use to connect engines or electric motors topumps, gear reducers, drive shafts. Purchase two halves and one flexible insert to makea complete coupling. Some series can be interchanged to reduce overall length (see listbelow). Inserts are available in either rubber or urethane construction. Urethane giveslonger life and 50% greater torque handling capability. Splined halves are available foruse with hydraulic pumps.• Interchangeable with L Series jaw couplings from Lovejoy, Browning and others.

• L-070 thru L-110 coupling halves have keyway with two set screws.

• L-050 have one set-screw only, (½˝ and ⅝˝ also have keyway).

Series Interchangeablity:

L-090 with L-095 coupled length will be 25/16˝ L-099 with L-100 coupled length will be 33/16˝

ITEM Bore O.D. Lgth. Shpg. Price1-1495 ⅝˝ 9 T 1¼˝ 1¼˝ 1 lb. $10.951-2985 ¾˝ 11 T 1½˝ 2¼˝ 2 lbs. $15.951-1392 ⅞˝ 13 T 1½˝ 2¼˝ 2 lbs. $ 8.501-1560 1˝ 6 T 1½˝ 2¼˝ 1 lb. $ 9.501-1561 1˝ 15 T 1½˝ 2¼˝ 1 lb. $ 9.501-1393 1¼˝ 14 T 2˝ 2¼˝ 2 lbs. $14.501-1562 1⅜˝ 6 T 2˝ 5˝ 3 lbs. $16.951-3556 1⅜˝ 21 T 2˝ 2¼˝ 2 lbs. $15.951-1513 1½˝ 17 T 2⅛˝ 2˝ 2 lbs. $18.95

ITEM Bore O.D. Lgth. Keyway Shpg. Price 1-1563-A ½˝ 1¼˝ 2˝ ⅛˝ 1 lb. $ 5.95 1-1563-B ⅝˝ 1½˝ 2½˝ 3/16˝ 1 lb. $ 7.95 1-1563-C ¾˝ 1⅝˝ 3˝ 3/16˝ 2 lbs. $ 8.95 1-1563-D ⅞˝ 1¾˝ 3½˝ 3/16˝ 2 lbs. $ 9.95 1-1563-E 1˝ 1¾˝ 4˝ ¼˝ 2 lbs. $11.95 1-1563-F 1⅛˝ 2˝ 4½˝ ¼˝ 3 lbs. $14.95 1-1563-G 1¼˝ 2⅛˝ 4½˝ ¼˝ 3 lbs. $14.95 1-1563-J 1¼˝ 2⅛˝ 4½˝ 5/16˝ 3 lbs. $18.95 1-1563-H 1⅜˝ 25/16˝ 4½˝ 5/16˝ 4 lbs. $18.95 1-1563-I 1½˝ 2½˝ 4½˝ ⅜˝ 4 lbs. $21.95

Performance Ratings with Rubber InsertCoupling Rated HP Rating Based on Speed (RPM) Coupling CoupledSeries Torque (in-lbs.) 100 300 1200 1800 3600 O.D. LengthL-050 28 0.04 0.12 0.48 0.72 1.44 15/64˝ 123/32˝L-070 37 0.06 0.18 0.72 1.08 2.16 1⅜˝ 2˝L-075 73 0.12 0.36 1.44 2.16 4.32 1¾˝ 2⅛˝L-090 126 0.20 0.60 2.40 3.60 7.20 2⅛˝ 211/32˝L-095 169 0.28 0.84 3.36 5.04 10.08 27/64˝ 2½˝L-099 260 0.42 1.26 5.04 7.56 15.10 217/32˝ 2⅞˝L-100 370 0.60 1.80 7.20 10.80 21.60 217/32˝ 3½˝L-110 680 1.10 3.30 13.20 19.80 39.60 35/16˝ 47/32˝

Flexible Coupling Halves Splined Coupling Halves PerCoupling ITEM Bore Sizes Per Half 9 Tooth 11 Tooth 13 Tooth Per Half Half Series Prefix ¼˝ 5/16˝ ⅜˝ 7/16˝ ½˝ 9/16˝ ⅝˝ ¾˝ ⅞˝ 15/16˝ 1˝ 1⅛˝ 1¼˝ 1⅜˝ 1½˝ 1⅝˝ Price ⅝˝ ¾˝ ⅞˝ Price Shpg.

L-050 1-3419 A B C D E - G - - - - - - - - - $ 3.00 ½ L-070 1-3614 - - - - E - G H - - - - - - - - $ 5.00 ¾ L-075 1-3420 - - - D E - G H J - - - - - - - $ 5.05 ¾ L-090 1-3615 - - - - E - G - - - - - - - - - $ 8.00 9 11 13 $17.95 1 L-095 1-3421 - - - D E F G H J K M N - - - - $ 8.00 9 11 13 $17.95 1 L-099 1-3616 - - - - E - G H J - M N O - - - $11.95 9 11 13 $24.95 2 L-100 1-3422 - - - - E F G H J K M N O P - - $13.00 9 11 13 $25.95 2 L-110 1-3423 - - - - - - G H J - M N O P R S $22.95 9 11 13 $37.95 5

L-050 Series L-075 thru L-110 SeriesInserts for 3 Piece Couplings

Coupling Rubber Inserts Urethane InsertsSeries ITEM Shpg. Price ITEM Shpg. Price

L-050 1-3419-X 1/10 $1.80L-070 1-3614-X 1/10 $2.55L-075 1-3420-X 1/10 $2.70 1-3420-UR 1/10 $11.95L-090 1-3615-X 1/10 $2.99 1-3615-UR 1/10 $12.95L-095 1-3421-X 1/10 $2.99 1-3421-UR 1/10 $13.95L-099 1-3616-X 1/10 $6.99 1-3616-UR 1/10 $14.95L-100 1-3422-X 1/10 $6.99 1-3422-UR 1/10 $14.95L-110 1-3423-X ¼ $10.00

Example:

A complete coupling for 10 HP at 3600 RPMcoupling a ½˝ dia. shaft and a ⅝˝ 9 tooth splined shaft.

Order one each of1-3421-E, 1-3421-9 and 1-3421-X.

Bore Sizes - Choose ITEM number suffix letter based on bore size required. Splined bores have numeric suffix.

8116 Fixed Bore Pulleys www.surpluscenter.com

Pulley

ITEM 1-995-B$3.95• New. Smooth bore with keyway.SPECIFICATIONS • Belt width ⅜˝• 1¾˝ O.D. • Belt type 3L• Bore ½˝ • Material die cast• Single groove • Shpg. ½ lb.

7˝ x 1⅝˝ V-BeltPulley

ITEM 1-2197$5.95SPECIFICATIONS• 7˝ O.D. • Belt width ⅝˝• 1⅝˝ I.D. hole with no hub • Steel construction• Single groove • Shpg. 3 lbs.

Fixed Bore Single & Double Groove Pulleys• Brand new cast iron pulleys. For use with type “A” and “B” belts. Fully balanced.• All pulleys furnished with one set screw• Pulleys have keyed bores in sizes greater than ½˝ (½˝ bore pulleys have no keyway).

• Select an ITEM number for pulley from chart according to outside diameter and add suffix letter according to bore size.

Single Groove Pulleys Double Groove Pulleys

Example: ITEM 1-BK24-A is a Example: ITEM 1-2BK25-A is a2.45˝ diameter pulley with ½˝ bore. 2.55˝ diameter pulley with ½˝ bore.

Datum Dia. Finished Bore Sizes Finished Bore Sizes OD A Belt B Belt ITEM ½˝ ⅝˝ ¾˝ ⅞˝ 1˝ 1⅛˝13/16˝1¼˝ 1⅜˝17/16˝ Shpg. Price ITEM ½˝ ⅝˝ ¾˝ ⅞˝ 1˝ 1⅛˝13/16˝1¼˝ 1⅜˝17/16˝ Shpg. Price

2.45˝ 1.80˝ 2.20˝ 1-BK24 A B C D – – – – – – 1 lb. $ 5.00 2.55˝ 1.90˝ 2.30˝ 1-BK25 A B C D – – – – – – 1 lb. $ 6.00 1-2BK25 A B C D – – – – – – 2 lbs. $ 9.55 2.65˝ 2.00˝ 2.40˝ 1-BK26 A B C D – – – – – – 1 lb. $ 6.45 2.75˝ 2.10˝ 2.50˝ 1-BK27 A B C D – F – – – – 1 lb. $ 7.00 1-2BK27 A B C D E – – – – – 2 lbs. $11.95 2.95˝ 2.20˝ 2.60˝ 1-BK28 A B C D E F – – – – 2 lbs. $ 7.40 1-2BK28 A B C D E F – – – – 3 lbs. $11.95 3.15˝ 2.40˝ 2.80˝ 1-BK30 A B C D E F – – – – 2 lbs. $ 7.50 1-2BK30 A B C D E F – – – – 4 lbs. $12.95 3.35˝ 2.60˝ 3.00˝ 1-BK32 A B C D E – – – – – 2 lbs. $ 8.05 1-2BK32 – B D E F – – – – 4 lbs. $12.95 3.55˝ 2.80˝ 3.20˝ 1-BK34 A B C D E F – – – – 2 lbs. $ 9.00 1-2BK34 – B C D E F – – – – 4 lbs. $14.95 3.75˝ 3.00˝ 3.40˝ 1-BK36 A B C D E F – – – – 2 lbs. $10.00 1-2BK36 – – C D E F – – I – 5 lbs. $15.95 3.95˝ 3.20˝ 3.60˝ 1-BK40 A B C D E F – – – – 2 lbs. $11.00 1-2BK40 – B C D E F – – – – 5 lbs. $17.95 4.25˝ 3.50˝ 3.90˝ 1-BK45 A B C D E F – – – – 3 lbs. $12.00 1-2BK45 – – – – E F – – I – 5 lbs. $18.95 4.45˝ 3.70˝ 4.10˝ 1-BK47 A B C D E F – – – – 3 lbs. $12.95 1-2BK47 – – – D E F – – – – 5 lbs. $18.95 4.75˝ 4.00˝ 4.40˝ 1-BK50 A B C D E F – – – – 3 lbs. $12.95 1-2BK50 – – C E F – – I – 5 lbs. $20.95 4.95˝ 4.20˝ 4.60˝ 1-BK52 A B C D E F – – – – 3 lbs. $12.95 1-2BK52 – – – D E F – – I – 6 lbs. $20.95 5.25˝ 4.50˝ 4.90˝ 1-BK55 A B C D E F G – – – 4 lbs. $13.95 1-2BK55 – – – – – F – – I – 6 lbs. $21.95 5.45˝ 4.70˝ 5.10˝ 1-BK57 – B C D E F – – – – 4 lbs. $13.95 1-2BK57 – – – – E F – – I – 6 lbs. $22.95 5.75˝ 5.00˝ 5.40˝ 1-BK60 A B C D E F G – – – 4 lbs. $14.95 1-2BK60 – – C D E F – – I – 6 lbs. $23.95 5.95˝ 5.20˝ 5.60˝ 1-BK62 A B C D E F G – – – 4 lbs. $15.95 1-2BK62 – – – – E F – – I – 6 lbs. $24.95 6.25˝ 5.50˝ 5.90˝ 1-BK65 – B C – E F – – – – 4 lbs. $16.95 1-2BK65 – – – – E F – – I – 6 lbs. $26.95 6.45˝ 5.70˝ 6.10˝ 1-BK67 – B C – E F – – – – 4 lbs. $17.95 1-2BK67 – – – – E F – – I – 6 lbs. $28.95 6.75˝ 6.00˝ 6.40˝ 1-BK70 – B C – E F G – – J 5 lbs. $17.95 1-2BK70 – – C – E F G – I J 8 lbs. $28.95 6.95˝ 6.20˝ 6.60˝ 1-BK72 – – C – E F – – I J 5 lbs. $18.95 7.25˝ 6.50˝ 6.90˝ 1-BK75 – – C – E F – – – J 5 lbs. $20.95 7.45˝ 6.70˝ 7.10˝ 1-BK77 – – C – E F – – I J 5 lbs. $21.95 7.75˝ 7.00˝ 7.40˝ 1-BK80 – B C D E F G H I J 6 lbs. $22.95 1-2BK80 – – C – E F G – I J 9 lbs. $35.95 8.25˝ 7.50˝ 7.90˝ 1-BK85 – – C – E F G – I J 6 lbs. $24.95 8.75˝ 8.00˝ 8.40˝ 1-BK90 – – C D E F G – I J 6 lbs. $25.95 1-2BK90 – – C – E F G – I J 10 lbs. $35.95 9.25˝ 8.50˝ 8.90˝ 1-BK95 – – C – E F – – I J 7 lbs. $27.95 9.75˝ 9.00˝ 9.40˝ 1-BK100 – – C D E F G H I J 7 lbs. $28.00 1-2BK100 – – C – E – G – I J 11 lbs. $35.95 10.25˝ 9.50˝ 9.90˝ 1-BK105 – – – – E – – – I J 7 lbs. $32.95 10.75˝ 10.00˝ 10.40˝ 1-BK110 – – C – E F G – I J 8 lbs. $33.95 1-2BK110 – – – – E – G – – J 12 lbs. $40.95 11.25˝ 10.50˝ 10.90˝ 1-BK115 – – – – E – – – I J 8 lbs. $34.95 11.75˝ 11.00˝ 11.40˝ 1-BK120 – – C – E – G – I J 9 lbs. $35.95 1-2BK120 – – – – E – G – – J 14 lbs. $46.95 12.75˝ 12.00˝ 12.40˝ 1-BK130 – – C – E F G – – J 10 lbs. $36.95 1-2BK130 – – – – E – G – – J 17 lbs. $52.95 13.75˝ 13.00˝ 13.40˝ 1-BK140 – – C – E – G – – J 12 lbs. $37.95 1-2BK140 – – – – E – G – – J 19 lbs. $58.95 15.75˝ 15.00˝ 15.40˝ 1-BK160 – – – – E F G H – J 14 lbs. $41.95 1-2BK160 – – – – E – G – – J 20 lbs. $64.95 18.75˝ 18.00˝ 18.40˝ 1-BK190 – – – – E – G H – J 16 lbs. $44.95 1-2BK190 – – – – – – G – – J 25 lbs. $73.95

Std. Keyseat DimensionsShaft Diam. Width Depth ½˝ No keyseat ⅝˝ - ⅞˝ 3/16˝ 3/32˝ 15/16˝ - 1¼˝ ¼˝ ⅛˝ 15/16˝ - 1⅜˝ 5/16˝ 5/32˝ 17/16˝ ⅜˝ 3/16˝

AlternatorPulley

ITEM 1-1625-M$1.79• New. Steel pulley, painted black, some rust.SPECIFICATIONS • 2⅝˝ diam.• Bore 0.665˝ • Belt size ⅜˝• Single groove • Shpg. 1½ lbs.

800-488-3407 Bushing Bore Pulleys 117&

H Series KeyedBushings

Your Choice

$5.50• Brand new, type H split taper bushings.For use with all of the pulleys at left.Shpg. 2 lbs.

Metric Standard ITEM Bore ITEM Bore 1-2913-37 ⅜˝ 1-2915-10 10 mm 1-2913-43 7/16˝ 1-2915-11 11 mm 1-2913-50 ½˝ 1-2915-12 12 mm 1-2913-56 9/16˝ 1-2915-14 14 mm 1-2913-62 ⅝˝ 1-2915-15 15 mm 1-2913-68 11/16˝ 1-2915-16 16 mm 1-2913-75 ¾˝ 1-2915-18 18 mm 1-2913-81 13/16˝ 1-2915-19 19 mm 1-2913-87 ⅞˝ 1-2915-20 20 mm 1-2913-93 15/16˝ 1-2915-22 22 mm 1-2913-100 1˝ 1-2915-24 24 mm 1-2913-106 11/16˝ 1-2915-25 25 mm 1-2913-112 1⅛˝ 1-2915-28 28 mm 1-2913-118 13/16˝ 1-2915-30 30 mm 1-2913-125 1¼˝ 1-2915-32 32 mm 1-2913-131 15/16˝ 1-2915-35 35 mm 1-2913-137 1⅜˝ 1-2915-36 36 mm 1-2913-143 17/16˝ 1-2915-38 38 mm 1-2913-150 1½˝

H Bushed Bore Single & Double Groove Pulleys• Brand new, cast iron, FHP pulleys. Use with a H-type split taper bushing (sold separatelybelow). For use with Type A or Type B belts.

Single Groove Pulleys Double Groove Pulleys Datum Dia. Hub Hub O.D. A Belt B Belt ITEM Width Shpg. Price ITEM Width Shpg. Price 3.15 2.40 2.80 1-BKH30 115/16˝ 2 lbs. $7.30 – 3.35 2.60 3.00 1-BKH32 115/16˝ 2 lbs. $8.00 1-2BKH32 213/16˝ 3 lbs. $12.95 3.55 2.80 3.20 1-BKH34 115/16˝ 2 lbs. $9.00 1-2BKH34 213/16˝ 3 lbs. $14.95 3.75 3.00 3.40 1-BKH36 1½˝ 2 lbs. $10.00 1-2BKH36 2⅜˝ 3 lbs. $15.95 3.95 3.20 3.60 1-BKH40 1½˝ 2 lbs. $10.95 1-2BKH40 2⅜˝ 3 lbs. $17.95 4.25 3.50 3.90 1-BKH45 1½˝ 2 lbs. $11.95 1-2BKH45 2⅜˝ 4 lbs. $18.95 4.45 3.70 4.10 1-BKH47 1½˝ 3 lbs. $11.95 1-2BKH47 1¾˝ 4 lbs. $18.95 4.75 4.00 4.40 1-BKH50 1½˝ 3 lbs. $12.95 1-2BKH50 1¾˝ 4 lbs. $20.95 4.95 4.20 4.60 1-BKH52 1½˝ 3 lbs. $12.95 1-2BKH52 1¾˝ 5 lbs. $20.95 5.25 4.50 4.90 1-BKH55 1½˝ 3 lbs. $13.95 1-2BKH55 1¾˝ 5 lbs. $21.95 5.45 4.70 5.10 1-BKH57 1½˝ 3 lbs. $13.95 1-2BKH57 1¾˝ 5 lbs. $22.95 5.75 5.00 5.40 1-BKH60 1½˝ 3 lbs. $15.00 1-2BKH60 1¾˝ 5 lbs. $23.95 5.95 5.20 5.60 1-BKH62 1½˝ 4 lbs. $15.95 1-2BKH62 1¾˝ 6 lbs. $24.95 6.25 5.50 5.90 1-BKH65 1½˝ 4 lbs. $16.95 1-2BKH65 1¾˝ 6 lbs. $26.95 6.45 5.70 6.10 1-BKH67 1½˝ 4 lbs. $17.95 1-2BKH67 1¾˝ 6 lbs. $28.95 6.75 6.00 6.40 1-BKH70 19/16˝ 4 lbs. $17.95 1-2BKH70 1¾˝ 6 lbs. $28.95 6.95 6.20 6.60 1-BKH72 19/16˝ 4 lbs. $18.95 – 7.25 6.50 6.90 1-BKH75 19/16˝ 4 lbs. $20.95 – 7.45 6.70 7.10 1-BKH77 19/16˝ 5 lbs. $21.95 – 7.75 7.00 7.40 1-BKH80 19/16˝ 5 lbs. $22.95 1-2BKH80 1¾˝ 8 lbs. $35.95 8.25 7.50 7.90 1-BKH85 19/16˝ 5 lbs. $24.95 – 8.75 8.00 8.40 1-BKH90 19/16˝ 6 lbs. $25.95 1-2BKH90 1¾˝ 9 lbs. $39.00 9.25 8.50 8.90 1-BKH95 19/16˝ 6 lbs. $27.95 – 9.75 9.00 9.40 1-BKH100 19/16˝ 6 lbs. $28.00 1-2BKH100 1¾˝ 10 lbs. $35.95 10.25 9.50 9.90 1-BKH105 19/16˝ 6 lbs. $30.00 – 10.75 10.00 10.40 1-BKH110 19/16˝ 7 lbs. $35.95 1-2BKH110 1¾˝ 11 lbs. $40.00 11.25 10.50 10.90 1-BKH115 19/16˝ 8 lbs. $36.95 – 11.75 11.00 11.40 1-BKH120 19/16˝ 8 lbs. $37.95 1-2BKH120 1¾˝ 13 lbs. $46.00 12.75 12.00 12.40 1-BKH130 19/16˝ 8 lbs. $38.95 1-2BKH130 1¾˝ 15 lbs. $52.95 13.75 13.00 13.40 1-BKH140 19/16˝ 10 lbs. $39.95 1-2BKH140 1¾˝ 16 lbs. $58.95 14.75 14.00 14.40 1-BKH150 19/16˝ 11 lbs. $40.95 – 15.75 15.00 15.40 1-BKH160 19/16˝ 12 lbs. $41.95 1-2BKH160 1¾˝ 19 lbs. $64.95 18.75 18.00 18.40 1-BKH190 19/16˝ 15 lbs. $47.95 1-2BKH190 1¾˝ 23 lbs. $73.95

Belt ITEM OD Bore Grooves Type Material Shpg. Price 1-3575 3½˝ 25mm 1 ⅝˝ Cast Iron 1 lb. $4.99 1-2565 3½˝ 1⅛˝ 1 ⅝˝ Cast Iron 3 lbs. $4.95 1-2576 4˝ ⅞˝ 1 ⅝˝ Stamped Steel 1½ lbs. $4.95 1-AZ47X3/4 4.7˝ ¾˝ 1 ½˝ Die Cast 1½ lbs. $4.95 1-2221 4⅞˝ 1˝ 2 ½˝ Cast Iron 5 lbs. $6.95 1-2427 * 5¼˝ ¾˝ 1 ⅝˝ Stamped Steel 3 lbs. $1.49 1-2177 5⅝˝ ¾˝ 1 ⅝˝ Cast Iron 4 lbs. $5.95 1-2540 6½˝ 17/16˝ 2 ⅜˝ Cast Iron 6 lbs. $7.95* Has ¾˝ square bore with 12 points

Pulleys

Idler Pulleys

Flat Belt Pressed V-Belt Pressed V-Belt Solid

• Use to provide tension on belts. All 3styles have extended inner race precisionball bearing hubs.

Flat Belt Pressed Steel StyleSPECIFICATIONS • Hub width 11/16˝• Outside dia. 3¼˝ • Groove dia. 2¾˝• Groove width 13/16˝ • Shpg. 1 lb.

ITEM 1-3743-A ½˝ bore hub $13.95ITEM 1-3743-B ⅝˝ bore hub $13.95SPECIFICATIONS • Hub width 11/16˝• Outside dia. 4½˝ • Groove dia. 4˝• Groove width 13/16˝ • Shpg. 1 lb.

ITEM 1-3744-A ½˝ bore hub $14.95ITEM 1-3744-B ⅝˝ bore hub $14.95V-Belt Pressed Steel StyleSPECIFICATIONS• Outside dia. 5˝ • Hub width 11/16˝• Belt size A (½˝) or B (⅝˝) • Shpg. 2 lbs.

ITEM 1-3745-A ½˝ bore hub $14.95ITEM 1-3745-B ⅝˝ bore hub $14.95V-Belt Solid Steel StyleSPECIFICATIONS• Outside dia. 4˝ • Hub bore ½˝ • Shpg. 3 lbs.

ITEM 1-3746-A $21.95• For A (½˝) belts, 11/16˝ hub width

ITEM 1-3746-B $24.95• For B (⅝˝) belts, 13/16˝ hub width

118 V-Belts www.surpluscenter.com8

Classic Profile V-Belts

OutsideITEM Model Lgth. Shpg. Price

13-A14 A14 or 4L160 16 ½ lb. $2.50 13-A15 A15 or 4L170 17 ½ lb. $2.60 13-A16 A16 or 4L180 18 ½ lb. $2.70 13-A17 A17 or 4L190 19 ½ lb. $2.80 13-A18 A18 or 4L200 20 ½ lb. $2.90 13-A19 A19 or 4L210 21 ½ lb. $3.00 13-A20 A20 or 4L220 22 ½ lb. $3.10 13-A21 A21 or 4L230 23 ½ lb. $3.20 13-A22 A22 or 4L240 24 ½ lb. $3.30 13-A23 A23 or 4L250 25 ½ lb. $3.45 13-A24 A24 or 4L260 26 ½ lb. $2.55 13-A25 A25 or 4L270 27 ½ lb. $2.60 13-A26 A26 or 4L280 28 ½ lb. $2.70 13-A27 A27 or 4L290 29 ½ lb. $2.80 13-A28 A28 or 4L300 30 ½ lb. $2.90 13-A29 A29 or 4L310 31 ½ lb. $2.95 13-A30 A30 or 4L320 32 ½ lb. $3.05 13-A31 A31 or 4L330 33 ½ lb. $3.15 13-A32 A32 or 4L340 34 ½ lb. $3.20 13-A33 A33 or 4L350 35 ½ lb. $3.30 13-A34 A34 or 4L360 36 ½ lb. $3.40 13-A35 A35 or 4L370 37 ½ lb. $3.50 13-A36 A36 or 4L380 38 ½ lb. $3.55 13-A37 A37 or 4L390 39 ½ lb. $3.65 13-A38 A38 or 4L400 40 ½ lb. $3.70 13-A39 A39 or 4L410 41 ½ lb. $3.85 13-A40 A40 or 4L420 42 ½ lb. $3.90 13-A41 A41 or 4L430 43 ½ lb. $4.00 13-A42 A42 or 4L440 44 ½ lb. $4.05 13-A43 A43 or 4L450 45 ½ lb. $4.15 13-A44 A44 or 4L460 46 ½ lb. $4.25 13-A45 A45 or 4L470 47 ¾ lb. $4.35 13-A46 A46 or 4L480 48 ¾ lb. $4.45 13-A47 A47 or 4L490 49 ¾ lb. $4.50 13-A48 A48 or 4L500 50 ¾ lb. $4.60 13-A49 A49 or 4L510 51 ¾ lb. $4.70 13-A50 A50 or 4L520 52 ¾ lb. $4.80 13-A51 A51 or 4L530 53 ¾ lb. $4.85 13-A52 A52 or 4L540 54 ¾ lb. $4.95 13-A53 A53 or 4L550 55 ¾ lb. $5.05 13-A54 A54 or 4L560 56 ¾ lb. $5.15 13-A55 A55 or 4L570 57 ¾ lb. $5.20 13-A56 A56 or 4L580 58 ¾ lb. $5.30 13-A57 A57 or 4L590 59 ¾ lb. $5.40 13-A58 A58 or 4L600 60 ¾ lb. $5.50 13-A59 A59 or 4L610 61 ¾ lb. $5.55 13-A60 A60 or 4L620 62 ¾ lb. $5.65


13-A61 A61 or 4L630 63 ¾ lb. $5.70 13-A62 A62 or 4L640 64 ¾ lb. $5.85 13-A63 A63 or 4L650 65 ¾ lb. $5.90 13-A64 A64 or 4L660 66 ¾ lb. $6.00 13-A65 A65 or 4L670 67 ¾ lb. $6.05 13-A66 A66 or 4L680 68 ¾ lb. $6.20 13-A67 A67 or 4L690 69 ¾ lb. $6.25 13-A68 A68 or 4L700 70 ¾ lb. $6.35 13-A69 A69 or 4L710 71 ¾ lb. $6.40 13-A70 A70 or 4L720 72 ¾ lb. $6.55 13-A71 A71 or 4L730 73 ¾ lb. $6.60 13-A72 A72 or 4L740 74 ¾ lb. $6.70 13-A73 A73 or 4L750 75 ¾ lb. $6.75 13-A74 A74 or 4L760 76 ¾ lb. $6.90 13-A75 A75 or 4L770 77 ¾ lb. $6.95 13-A76 A76 or 4L780 78 ¾ lb. $7.05 13-A77 A77 or 4L790 79 ¾ lb. $7.15 13-A78 A78 or 4L800 80 ¾ lb. $7.25 13-A79 A79 or 4L810 81 ¾ lb. $7.30 13-A80 A80 or 4L820 82 ¾ lb. $7.40 13-A81 A81 or 4L830 83 ¾ lb. $7.50 13-A82 A82 or 4L840 84 ¾ lb. $7.60 13-A83 A83 or 4L850 85 ¾ lb. $7.65 13-A84 A84 or 4L860 86 ¾ lb. $7.75 13-A85 A85 or 4L870 87 ¾ lb. $7.85 13-A86 A86 or 4L880 88 ¾ lb. $7.90 13-A87 A87 or 4L890 89 ¾ lb. $8.00 13-A88 A88 or 4L900 90 ¾ lb. $8.10 13-A89 A89 or 4L910 91 ¾ lb. $8.20 13-A90 A90 or 4L920 92 ¾ lb. $8.25 13-A91 A91 or 4L930 93 1 lb. $8.35 13-A92 A92 or 4L940 94 1 lb. $8.45 13-A93 A93 or 4L950 95 1 lb. $8.55 13-A94 A94 or 4L960 96 1 lb. $8.60 13-A95 A95 or 4L970 97 1 lb. $8.70 13-A96 A96 or 4L980 98 1 lb. $8.80 13-A97 A97 or 4L990 99 1 lb. $8.90 13-A98 A98 or 4L1000 100 1 lb. $8.95 13-A99 A99 101 1 lb. $9.05 13-A100 A100 102 1 lb. $9.15 13-A103 A103 105 1 lb. $9.40 13-A105 A105 107 1 lb. $9.60 13-A110 A110 112 1 lb. $10.00 13-A112 A112 114 1 lb. $10.95 13-A116 A116 118 1 lb. $10.95 13-A120 A120 122 1 lb. $10.95 13-A126 A126 128 2 lbs. $11.95 13-A128 A128 130 2 lbs. $11.95 13-A136 A136 138 2 lbs. $12.95

A (½˝) V-Belts

• Brand new, BESTORQ classic profile V-belts.Highly oil and heat resistant. Wrapped construction.Outside length is the outer circumference of the belt.These belts exceed RMA published ratings. Outside

ITEM Model Lgth. Shpg. Price 13-B20 B20 or 5L230 23 ½ lb. $3.00 13-B21 B21 or 5L240 24 ½ lb. $3.15 13-B22 B22 or 5L250 25 ½ lb. $3.25 13-B23 B23 or 5L260 26 ½ lb. $3.35 13-B24 B24 or 5L270 27 ½ lb. $3.45 13-B25 B25 or 5L280 28 ½ lb. $3.55 13-B26 B26 or 5L290 29 ¾ lb. $3.65 13-B27 B27 or 5L300 30 ¾ lb. $3.80 13-B28 B28 or 5L310 31 ¾ lb. $3.90 13-B29 B29 or 5L320 32 ¾ lb. $4.00 13-B30 B30 or 5L330 33 ¾ lb. $4.15 13-B31 B31 or 5L340 34 ¾ lb. $4.25 13-B32 B32 or 5L350 35 ¾ lb. $4.35 13-B33 B33 or 5L360 36 ¾ lb. $4.45 13-B34 B34 or 5L370 37 ¾ lb. $4.55 13-B35 B35 or 5L380 38 ¾ lb. $4.70 13-B36 B36 or 5L390 39 ¾ lb. $4.80 13-B37 B37 or 5L400 40 ¾ lb. $4.90 13-B38 B38 or 5L410 41 ¾ lb. $5.00 13-B39 B39 or 5L420 42 ¾ lb. $5.15 13-B40 B40 or 5L430 43 ¾ lb. $5.25 13-B41 B41 or 5L440 44 ¾ lb. $5.35 13-B42 B42 or 5L450 45 ¾ lb. $5.50 13-B43 B43 or 5L460 46 ¾ lb. $5.60 13-B44 B44 or 5L470 47 ¾ lb. $5.70 13-B45 B45 or 5L480 48 ¾ lb. $5.85 13-B46 B46 or 5L490 49 ¾ lb. $5.95 13-B47 B47 or 5L500 50 ¾ lb. $6.05 13-B48 B48 or 5L510 51 ¾ lb. $6.20 13-B49 B49 or 5L520 52 ¾ lb. $6.30 13-B50 B50 or 5L530 53 ¾ lb. $6.40 13-B51 B51 or 5L540 54 ¾ lb. $6.50 13-B52 B52 or 5L550 55 ¾ lb. $6.65 13-B53 B53 or 5L560 56 ¾ lb. $6.75 13-B54 B54 or 5L570 57 ¾ lb. $6.85 13-B55 B55 or 5L580 58 1 lb. $6.95 13-B56 B56 or 5L590 59 1 lb. $7.10 13-B57 B57 or 5L600 60 1 lb. $7.20 13-B58 B58 or 5L610 61 1 lb. $7.30 13-B59 B59 or 5L620 62 1 lb. $7.40 13-B60 B60 or 5L630 63 1 lb. $7.55 13-B61 B61 or 5L640 64 1 lb. $7.65 13-B62 B62 or 5L650 65 1 lb. $7.75 13-B63 B63 or 5L660 66 1 lb. $7.90 13-B64 B64 or 5L670 67 1 lb. $8.00 13-B65 B65 or 5L680 68 1 lb. $8.10 13-B66 B66 or 5L690 69 1 lb. $8.25 13-B67 B67 or 5L700 70 1 lb. $8.35 13-B68 B68 or 5L710 71 1 lb. $8.50 13-B69 B69 or 5L720 72 1 lb. $8.60

B (⅝˝) V-Belts• Brand new, BESTORQ classic profile V-belts. Highly oil and heat resistant.Wrapped construction. Outside length

& 800-488-3407 V-Belts 119


13-AX20 AX20 22 ½ lb. $4.70 13-AX21 AX21 23 ½ lb. $4.80 13-AX22 AX22 24 ½ lb. $4.95 13-AX23 AX23 25 ½ lb. $5.05 13-AX24 AX24 26 ½ lb. $5.15 13-AX25 AX25 27 ½ lb. $5.25 13-AX26 AX26 28 ½ lb. $5.35 13-AX27 AX27 29 ½ lb. $5.50 13-AX28 AX28 30 ½ lb. $5.60 13-AX29 AX29 31 ½ lb. $5.70 13-AX30 AX30 32 ½ lb. $5.85 13-AX31 AX31 33 ½ lb. $5.95 13-AX32 AX32 34 ½ lb. $6.05 13-AX33 AX33 35 ½ lb. $6.20 13-AX34 AX34 36 ½ lb. $6.30 13-AX35 AX35 37 ½ lb. $6.40 13-AX36 AX36 38 ½ lb. $6.55 13-AX37 AX37 39 ½ lb. $6.65 13-AX38 AX38 40 ½ lb. $6.75 13-AX39 AX39 41 ½ lb. $6.90 13-AX40 AX40 42 ½ lb. $7.00 13-AX41 AX41 43 ½ lb. $7.15 13-AX42 AX42 44 ½ lb. $7.25 13-AX43 AX43 45 ½ lb. $7.35 13-AX44 AX44 46 ½ lb. $7.50 13-AX45 AX45 47 ¾ lb. $7.60 13-AX46 AX46 48 ¾ lb. $7.70 13-AX47 AX47 49 ¾ lb. $7.85 13-AX48 AX48 50 ¾ lb. $7.95 13-AX49 AX49 51 ¾ lb. $8.05 13-AX50 AX50 52 ¾ lb. $8.20 13-AX51 AX51 53 ¾ lb. $8.30 13-AX52 AX52 54 ¾ lb. $8.40 13-AX53 AX53 55 ¾ lb. $8.55 13-AX54 AX54 56 ¾ lb. $8.65 13-AX55 AX55 57 ¾ lb. $8.80 13-AX56 AX56 58 ¾ lb. $8.90 13-AX57 AX57 59 ¾ lb. $9.00 13-AX58 AX58 60 ¾ lb. $9.15 13-AX59 AX59 61 ¾ lb. $9.25 13-AX60 AX60 62 ¾ lb. $9.40 13-AX61 AX61 63 ¾ lb. $9.50 13-AX62 AX62 64 ¾ lb. $9.60 13-AX63 AX63 65 ¾ lb. $9.75 13-AX64 AX64 66 ¾ lb. $9.85 13-AX65 AX65 67 ¾ lb. $9.95 13-AX66 AX66 68 ¾ lb. $10.95 13-AX67 AX67 69 ¾ lb. $10.95 13-AX68 AX68 70 ¾ lb. $10.95 13-AX69 AX69 71 ¾ lb. $10.95 13-AX70 AX70 72 ¾ lb. $10.95 13-AX71 AX71 73 ¾ lb. $10.95 13-AX72 AX72 74 ¾ lb. $10.95 13-AX73 AX73 75 ¾ lb. $10.95 13-AX74 AX74 76 ¾ lb. $11.95 13-AX75 AX75 77 ¾ lb. $11.95 13-AX76 AX76 78 ¾ lb. $11.95 13-AX77 AX77 79 ¾ lb. $11.95 13-AX78 AX78 80 ¾ lb. $11.95 13-AX79 AX79 81 ¾ lb. $11.95 13-AX80 AX80 82 ¾ lb. $11.95 13-AX81 AX81 83 ¾ lb. $11.95 13-AX82 AX82 84 ¾ lb. $11.95 13-AX83 AX83 85 ¾ lb. $12.95 13-AX84 AX84 86 ¾ lb. $12.95 13-AX85 AX85 87 ¾ lb. $12.95 13-AX86 AX86 88 ¾ lb. $12.95 13-AX87 AX87 89 ¾ lb. $12.95 13-AX88 AX88 90 ¾ lb. $12.95 13-AX89 AX89 91 ¾ lb. $12.95 13-AX90 AX90 92 ¾ lb. $12.95


13-BX30 BX30 33 ¾ lb. $9.10 13-BX31 BX31 34 ¾ lb. $9.25 13-BX32 BX32 35 ¾ lb. $9.40 13-BX33 BX33 36 ¾ lb. $9.60 13-BX34 BX34 37 ¾ lb. $9.75 13-BX35 BX35 38 ¾ lb. $9.95 13-BX36 BX36 39 ¾ lb. $10.95 13-BX37 BX37 40 ¾ lb. $10.95 13-BX38 BX38 41 ¾ lb. $10.95 13-BX39 BX39 42 ¾ lb. $10.95 13-BX40 BX40 43 ¾ lb. $10.95 13-BX41 BX41 44 ¾ lb. $10.95 13-BX42 BX42 45 ¾ lb. $11.95 13-BX43 BX43 46 ¾ lb. $11.95 13-BX44 BX44 47 ¾ lb. $11.95 13-BX45 BX45 48 ¾ lb. $11.95 13-BX46 BX46 49 ¾ lb. $11.95 13-BX47 BX47 50 ¾ lb. $11.95 13-BX48 BX48 51 ¾ lb. $12.95 13-BX49 BX49 52 ¾ lb. $12.95 13-BX50 BX50 53 ¾ lb. $12.95 13-BX51 BX51 54 ¾ lb. $12.95 13-BX52 BX52 55 ¾ lb. $12.95 13-BX53 BX53 56 ¾ lb. $12.95 13-BX54 BX54 57 1 lb. $13.95 13-BX55 BX55 58 1 lb. $13.95 13-BX56 BX56 59 1 lb. $13.95 13-BX57 BX57 60 1 lb. $13.95 13-BX58 BX58 61 1 lb. $13.95 13-BX59 BX59 62 1 lb. $14.95 13-BX60 BX60 63 1 lb. $14.95 13-BX61 BX61 64 1 lb. $14.95 13-BX62 BX62 65 1 lb. $14.95 13-BX63 BX63 66 1 lb. $14.95 13-BX64 BX64 67 1 lb. $14.95 13-BX65 BX65 68 1 lb. $15.95 13-BX66 BX66 69 1 lb. $15.95 13-BX67 BX67 70 1 lb. $15.95 13-BX68 BX68 71 1 lb. $15.95 13-BX69 BX69 72 1 lb. $15.95 13-BX70 BX70 73 1 lb. $15.95 13-BX71 BX71 74 1 lb. $16.95 13-BX72 BX72 75 1 lb. $16.95 13-BX73 BX73 76 1 lb. $16.95 13-BX74 BX74 77 1 lb. $16.95 13-BX75 BX75 78 1 lb. $16.95 13-BX76 BX76 79 1 lb. $16.95 13-BX77 BX77 80 1 lb. $17.95 13-BX78 BX78 81 1 lb. $17.95 13-BX79 BX79 82 1¼ lb. $17.95 13-BX80 BX80 83 1¼ lb. $17.95 13-BX81 BX81 84 1¼ lb. $17.95 13-BX82 BX82 85 1¼ lb. $17.95 13-BX83 BX83 86 1¼ lb. $18.95 13-BX84 BX84 87 1¼ lb. $18.95 13-BX85 BX85 88 1¼ lb. $18.95 13-BX86 BX86 89 1¼ lb. $18.95 13-BX87 BX87 90 1¼ lb. $18.95 13-BX88 BX88 91 1¼ lb. $19.95 13-BX89 BX89 92 1¼ lb. $19.95 13-BX90 BX90 93 1¼ lb. $19.95 13-BX94 BX94 97 1½ lb. $20.95 13-BX95 BX95 98 1½ lb. $20.95 13-BX97 BX97 100 1½ lb. $20.95 13-BX105 BX105 108 1½ lb. $21.95 13-BX112 BX112 115 2 lbs. $23.95 13-BX115 BX115 118 2 lbs. $23.95 13-BX116 BX116 119 2 lbs. $23.95 13-BX120 BX120 123 2 lbs. $24.95 13-BX124 BX124 127 2 lbs. $24.95 13-BX128 BX128 131 2 lbs. $24.95

Notched V-Belts• Brand new, BESTORQ notched, classic profile V-belts. Highly oil and heat resistant. Cutedge, molded notch construction. Notches give belt superior flexibility around pulleys andlonger working life compared to standard V-belts. Outside length is the outer circumfer-ence of the belt. These belts exceed RMA published ratings.

AX (½˝) Notched V-Belts BX (⅝˝) Notched V-Belts


13-B70 B70 or 5L730 73 1 lb. $8.70 13-B71 B71 or 5L740 74 1 lb. $8.80 13-B72 B72 or 5L750 75 1 lb. $8.95 13-B73 B73 or 5L760 76 1 lb. $9.05 13-B74 B74 or 5L770 77 1 lb. $9.15 13-B75 B75 or 5L780 78 1 lb. $9.25 13-B76 B76 or 5L790 79 1 lb. $9.40 13-B77 B77 or 5L800 80 1 lb. $9.50 13-B78 B78 or 5L810 81 1 lb. $9.60 13-B79 B79 or 5L820 82 1 lb. $9.75 13-B80 B80 or 5L830 83 1¼ lb. $9.85 13-B81 B81 or 5L840 84 1¼ lb. $9.95 13-B82 B82 or 5L850 85 1¼ lb. $10.95 13-B83 B83 or 5L860 86 1¼ lb. $10.95 13-B84 B84 or 5L870 87 1¼ lb. $10.95 13-B85 B85 or 5L880 88 1¼ lb. $10.95 13-B86 B86 or 5L890 89 1¼ lb. $10.95 13-B87 B87 or 5L900 90 1¼ lb. $10.95 13-B88 B88 or 5L910 91 1¼ lb. $10.95 13-B89 B89 or 5L920 92 1¼ lb. $10.95 13-B90 B90 or 5L930 93 1¼ lb. $10.95 13-B91 B91 or 5L940 94 1¼ lb. $11.95 13-B92 B92 or 5L950 95 1¼ lb. $11.95 13-B93 B93 or 5L960 96 1½ lb. $11.95 13-B94 B94 or 5L970 97 1½ lb. $11.95 13-B95 B95 or 5L980 98 1½ lb. $11.95 13-B96 B96 or 5L990 99 1½ lb. $11.95 13-B97 B97 or 5L1000 100 1½ lb. $11.95 13-B99 B99 102 1½ lb. $12.95 13-B100 B100 103 1½ lb. $12.95 13-B101 B101 104 1½ lb. $12.95 13-B102 B102 105 1½ lb. $12.95 13-B103 B103 106 1½ lb. $12.95 13-B105 B105 108 1½ lb. $12.95 13-B106 B106 109 1½ lb. $12.95 13-B108 B108 111 1½ lb. $13.95 13-B111 B111 114 2 lbs. $13.95 13-B112 B112 115 2 lbs. $13.95 13-B113 B113 116 2 lbs. $13.95 13-B115 B115 118 2 lbs. $13.95 13-B116 B116 119 2 lbs. $13.95 13-B117 B117 120 2 lbs. $14.95 13-B118 B118 121 2 lbs. $14.95 13-B120 B120 123 2 lbs. $14.95 13-B122 B122 125 2 lbs. $14.95 13-B123 B123 126 2 lbs. $14.95 13-B124 B124 127 2 lbs. $14.95 13-B128 B128 131 2 lbs. $15.95 13-B133 B133 136 2 lbs. $15.95 13-B136 B136 139 2 lbs. $16.95 13-B140 B140 143 2 lbs. $16.95 13-B144 B144 147 2 lbs. $17.95

B (⅝˝) V-Beltsis the outer circumference of the belt.These belts exceed RMA published ratings.

Six Speed Transaxle w/Wet Clutch

ITEM 13-1088 $399.99• Factory reconditioned PEERLESS Model618-0170. Originally used on Cub Cadet®2000 Series lawn tractors. Six speedtransaxle with forward/reverse wet clutch.True differential action. Mechanically actu-ated brake. Ideal for lawn tractor replace-ment or use for self propelled vehicles.

SPECIFICATIONS• 13-18 HP • 3600 RPM max. • CCW input • Mechanical brake• Six speed • Shaft 13/16˝ tapered • 4 bolt hub on 4˝ B.C. • Size 16½˝ x 22½˝ x 14˝• Forward/reverse clutch w/⅜˝ threaded end • 28˝ hub/hub width • Shpg. 93 lbs.

120 Transaxles www.surpluscenter.com8

5 Speed TransaxleAssembly

ITEM 13-1400 $149.50• New SPICER Model 4360-149 transaxle.Originally made for riding mowers. Externaldisc brake.SPECIFICATIONS • Axles ¾˝ dia. x 5¾˝ long,• 5 forward speeds, keyed w/snap ring grooveneutral and reverse • Mounting ctrs. 1¾˝ x 13˝• ⅝˝ diam. input shaft • Size 10½˝ x 32¾˝ x 5¾˝• CW input rotation • Shpg. 42 lbs.

Single Speed Transmission

ITEM 1-2948$14.99

• New, GENERAL TRANSMISSION Model1101619 single speed transmission.Spring loaded clutch arm engages input toaxle shaft. Plastic housing. Originally man-ufactured for self-propelled lawn mowers.Solid axle. Axle has snap ring groove andthru-holes at both ends. Thru-holes are 3/16˝diam. and centered 1⅜˝ from the end ofaxle. Non-reversing.SPECIFICATIONS • Axle lgths. 39/16˝ & 12˝• Gear ratio 6.25:1 • Overall axle lgth. 19⅜˝• Input pulley ⅜˝ belt, • CW input rotation25/16˝ outside diam. • Size 19⅜˝ x 4¾˝ x 4⅞˝

• Axle diam. ½˝ • Shpg. 4 lbs.

ZTR Left/RightTransaxle Assembly

ITEM 13-1473 $699.99• New, HYDRO-GEAR IVT Series Models324-2600R/324-2600L zero-turn style hy-drostatic transaxles. Die cast aluminumhousing, belt-drive input pulley with fan,single control lever per unit for forward/re-verse and speed control, disengagementlever to allow freewheeling, output wheelhub with studs, and parking brake.SPECIFICATIONS• Input 3000 RPM max. • Input rotation CW• Overall reduction 19.2:1 • Axle lgth. 4⅞˝ housing• Output speed 0-150 RPM to face of hub• Output torque • Output four bolt wheelcontinuous 140 ft-lbs., hub on 4˝ B.C.intermittent 250 ft-lbs. • Mount

• Max. axle weight Front 2 bolt holes 6¾˝ c/c325 lbs. per axle Rear 4 bolt holes 6¾˝ x 2⅝˝

• Max. tire dia. 18˝ • Lubrication 20W-50 oil• Input 4½˝ dia. pulley • Size 14¼˝ x 7½˝ x 8½˝for ½˝ belt • Shpg. 80 lbs.

Ships in two 40 lb. boxes

Single SpeedTransmission

ITEM 1-3232 $11.99• New, PEERLESS Model 301-021 singlespeed transmission. Spring loaded clutcharm engages input to axle shaft. Plastichousing. Originally manufactured for self-propelled lawn mowers. Solid axle with twosnap ring grooves and 0.2˝ square thru-holesat each end. Holes are centered 1˝ from theend of axle. Snap ring grooves are at end ofaxle and 1¼˝ inboard. Axle lengths measuredfrom housing to end of axle. Non-reversing.SPECIFICATIONS • Axle lengths 3⅜˝ & 11¼˝• Gear ratio 10:1 • Total axle lgth. 18˝• Pulley ⅜˝ belt, 2¼˝ O.D. • Input rotation CW• Axle dia. ½˝ stepped to • Size 18˝ x 3¾˝ x 3¾˝12mm on outer 3˝ of ea. end • Shpg. 4 lbs.

Variable Speed Transaxle

ITEM 13-1474 $229.99• New PEERLESS 2000 Series Model6845P1. Hydrostatic transaxle for variablespeed equipment. Single control for speedand directional control. Independentlysealed pump and differential aluminumhousings. 4½˝ dia. input pulley with coolingfan. External mechanical brake.SPECIFICATIONS• Input 2550 RPM max. • Max output 120 rpm• Max axle wt. 525 lbs. • Input rotation CW• Input pulley 4½˝ dia. for ⅝˝ belt• Axles ¾˝ dia. x 5¾˝ w/keyway and snap ring groove• Overall width 31¼˝ • Housing size• Dual 4 bolt mtg. patterns 19⅝˝ x 12˝ x 6½˝2½˝ x 16¼˝; 1¾˝ x 13˝ • Shpg. 48 lbs.

Transaxle Assemblies

ITEM 14-1471 ITEM 14-1476

• New PEERLESS trans axles. Originally made for riding mowers. External disc brake.This is a tractor style rider transaxle. Input shaft must be in front of the axles.SPECIFICATIONS• CW input rotation • Two four-bolt mounts on axle axis:• Input shaft ⅝˝ dia. Inner mtg. centers 1¾˝ x 13˝• Axle ¾˝ dia. with keyway and snap groove rings Outer mtg. centers 2½˝ x 16¼˝

ITEM Speeds Model Axle length Shpg. Price13-1471 2F/N/R MST-202-555A 31.25˝ 32 lbs. $79.9913-1476 3F/N/R 930-035 27.8˝ 36 lbs. $119.9513-1475 4F/N/R 930-032 30˝ 37 lbs. $136.95

Forward-Neutral-ReverseTransaxle Assembly

ITEM 13-1468 $329.99• New DANA SPICER Model 012AJ410-1 transaxle assem bly with auxiliary output shaft.Originally made for off-road utility vehicles. Ideal transaxle for building engine and electricmotor driven vehicles, self-propelled carts, and other mobile equipment. Input shifter shaftfor use with lever to provide forward, neutral and reverse. Auxiliary output shaft with amounting plate to install a right angle gearbox to drive the front differential in four wheeldrive applications. Differential action on drive wheels. Lever operated differential lock toengage both drive axles. Hydraulic operated drum brakes with lever actuated parking brake.SPECIFICATIONS• Input power 20 HP • 4WD shaft ¾˝ x 1½˝ w/keyway • Spring pad mounts 31½˝ ctr/ctr• Input torque ratings • Load rating 1500 lbs. • Wheel hub width 47½˝24 ft-lbs. cont., 96 ft-lbs. int. max. • Gear ratio • Wheel bolt pattern 4 bolt on 4˝ B.C.• Input shaft ⅞˝ dia. x 3¼˝ keyed Forward 13.25:1, Reverse 14.36:1 • Wheel stud size ½˝-20 UNF• Input shaft rotation CCW • Gear ratio 4WD/Axle shafts 4.89:1 • Size 10½˝ x 51½˝ x 14¼˝• Shifter shaft 0.470˝ dia. x ¾˝ w/flats • Lube cap. 22 oz. 80-90W gear lube • Shpg. 113 lbs.

& 800-488-3407 Rod Ends & PTO Shafts 121

Female Threaded Rod EndsLeft Hand Right Hand End-To-Center

ITEM ITEM Bore Thread Length Shpg. Price13-CFL-4 13-CFR-4 ¼˝ ¼˝-28 1.312˝ ¼ lb. $5.0013-CFL-5 13-CFR-5 5/16˝ 5/16˝-24 1.375˝ ¼ lb. $4.5513-CFL-6 13-CFR-6 ⅜˝ ⅜˝-24 1.625˝ ¼ lb. $4.5013-CFL-7 13-CFR-7 7/16˝ 7/16˝-20 1.812˝ ¼ lb. $5.5513-CFL-8 13-CFR-8 ½˝ ½˝-20 2.125˝ ½ lb. $6.1013-CFL-10 13-CFR-10 ⅝˝ ⅝˝-18 2.500˝ ½ lb. $8.7513-CFL-12 13-CFR-12 ¾˝ ¾˝-16 2.875˝ ¾ lb. $12.9513-CFL-16 13-CFR-16 1˝ 1˝-14 4.125˝ 2¼ lb. $32.95

Male Threaded Rod EndsLeft Hand Right Hand End-To-Center

ITEM ITEM Bore Thread Length Shpg. Price13-CML-4 13-CMR-4 ¼˝ ¼˝-28 1.562˝ ¼ lb. $5.0013-CML-5 13-CMR-5 5/16˝ 5/16˝-24 1.875˝ ¼ lb. $4.5513-CML-6 13-CMR-6 ⅜˝ ⅜˝-24 1.938˝ ¼ lb. $4.5013-CML-7 13-CMR-7 7/16˝ 7/16˝-20 2.125˝ ¼ lb. $5.5513-CML-8 13-CMR-8 ½˝ ½˝-20 2.438˝ ¼ lb. $6.1013-CML-10 13-CMR-10 ⅝˝ ⅝˝-18 2.625˝ ½ lb. $8.7513-CML-12 13-CMR-12 ¾˝ ¾˝-16 2.875˝ ¾ lb. $12.95

– 13-CMR-16 1˝ 1˝-14 4.125˝ 2 lbs. $32.95

Female Threaded Rod EndsWith Male Threaded StudsLeft Hand Right Hand End-To-Center

ITEM ITEM Thread Length Shpg. Price13-AFL-4S 13-AFR-4S ¼˝-28 1.312˝ ¼ lb. $4.9513-AFL-5S 13-AFR-5S 5/16˝-24 1.375˝ ¼ lb. $5.9513-AFL-6S 13-AFR-6S ⅜˝-24 1.625˝ ¼ lb. $6.9513-AFL-7S 13-AFR-7S 7/16˝-20 1.812˝ ½ lb. $7.9513-AFL-8S 13-AFR-8S ½˝-20 2.125˝ ½ lb. $8.9013-AFL-10S 13-AFR-10S ⅝˝-18 2.500˝ ¾ lb. $14.9513-AFL-12S 13-AFR-12S ¾˝-16 2.875˝ 1¼ lb. $16.95

Male Threaded Rod EndsWith Male Threaded StudsLeft Hand Right Hand End-To-Center

ITEM ITEM Thread Length Shpg. Price13-AML-4S 13-AMR-4S ¼˝-28 1.562˝ ¼ lb. $4.9513-AML-5S 13-AMR-5S 5/16˝-24 1.875˝ ¼ lb. $5.9513-AML-6S 13-AMR-6S ⅜˝-24 1.938˝ ¼ lb. $6.95

– 13-AMR-7S 7/16˝-20 2.125˝ ½ lb. $7.9513-AML-8S 13-AMR-8S ½˝-20 2.438˝ ½ lb. $8.9013-AML-10S 13-AMR-10S ⅝˝-18 2.625˝ ¾ lb. $14.95

– 13-AMR-12S ¾˝-16 2.875˝ 1¼ lb. $16.95

Threaded Rod Ends• Brand new. Available with left or right hand threads. Steel housing with steel raceway.

PTO and Jack Shafts

A B C

D E F

PTO Shafts U-Joint at each endOperating Slip Clutch

ITEM HP Style Length Universal Joint Shaft Ends Setting Shpg. Price1-3720-Y 65 E 36.7˝-51˝ 1¾-20 T w/clamp 1¾-20T QuickLok Sleeve None 60 lbs. $129.991-3721-B 90 A 82.5˝ fixed 1⅜-6T w/bolt 1⅜-6T w/bolt 940 ft. lbs. 110 lbs. $129.991-3720-Q 36 D 51˝-65˝ 1⅜-6T QuickLok Sleeve 1¼˝ ID w/⅜˝ pin hole None 34 lbs. $129.991-3720-A 36 D 33˝-42˝ 1⅜-6T QuickLok Sleeve 1⅜-21T w/clamp None 32 lbs. $129.991-3720-K 90 D 48˝ fixed 1¾-20T Lock Pin 1⅜-21T Lock Pin None 70 lbs. $129.991-3720-W 65 E 32˝-42˝ 1¾-20 T w/clamp 1⅜-6 T slide collar None 55 lbs. $129.991-3323 120 F 50˝ fixed 1⅜-21T w/set screws 1⅜-21T None 24 lbs. $129.991-3469 38 D 36˝-46˝ 1⅜-6T Slide Lock 1¼˝ ID w/⅜˝ pin hole None 34 lbs. $149.991-1918-B 60 A 26˝ fixed 1⅜-6T QuickLok Sleeve 1⅜-6T slip 996 ft. lbs. 46 lbs. $149.99

Jack Shafts Male spline at one end, U-joint at otherOperating Slip Clutch

ITEM HP Style Length Male Shaft End U-joint End Setting Shpg. Price1-3722-B 36 B 33˝-42˝ 1⅜-21T male 1¾-20T w/clamp None 31 lbs. $49.991-3722-I 65 B 24.91˝ fixed 1¾-20T male 1¾-20T w/clamp None 31 lbs. $49.991-3722-H 65 B 26.91˝ fixed 1¾-20T male 1¾-20T w/clamp None 32 lbs. $49.991-3722-G 36 C 44˝ -56˝ 1⅜-21T male 1¾-20T w/clamp 940 ft. lbs. 51 lbs. $49.991-3722-K 36 C 51.5˝ fixed 1⅜-21T male 1¾-20T w/clamp 940 ft. lbs. 50 lbs. $49.991-3722-F 36 C 48.5˝ fixed 1⅜-6T male 1⅜-6T w/clamp 940 ft. lbs. 60 lbs. $49.99

6 Ohm Power ResistorITEM 11-2409$1.99• Used, metal cased power resistor.SPECIFICATIONS • Terminals ¼˝ spade• Resistance 6 Ohm • Mount 2 holes on 4⅛˝ ctrs.• Power 50 Watts w/o heatsink• Size 311/16˝ x ¾˝ x ¾˝100 Watts w/ heatsink • Shpg. ½ lb.

Variable Resistors• Used, ceramic variable power resistor.

SPECIFICATIONS• Power 50 Watts • Terminals ¼˝ spade • Size 1¼˝ diam. x 4˝ • Shpg. ½ lb.

ITEM 11-2408-10 $1.99 ITEM 11-2408-40 $3.99• Resistance 0.5 to 10 Ohm. • Resistance 0.5 to 40 Ohm.

122 Capacitors & Resistors www.surpluscenter.com8

Used Motor Start Capacitors• Used, removed from equipment.

ITEM MFD Voltage Shpg. Price 22-1132 36-43 220 ¼ lb. $2.99 22-1092 43-53 125 ½ lb. $1.49

Motor Run Capacitors• New. Size does not include terminals. Shpg. 1 lb.

ITEM Voltage MFD Shape Size Price22-1300 330 2 Oval 2⅛˝ x 1¼˝ x 19/16˝ $1.9922-1244 370 3 Oval 25/32˝ x 15/16˝ x 1½˝ $2.7922-1245 370 3 Oval 25/32˝ x 15/16˝ x 2⅝˝ $2.7922-1249 370 5 Oval 25/32˝ x 15/16˝ x 2⅝˝ $2.9922-1210 440 8 Oval 1¼˝ x 2˝ x 3⅞˝ $3.4922-1211 ** 330 9 Oval 1¼˝ x 2˝ x 3⅞˝ $3.6922-1250 370 10 Oval 25/32˝ x 15/16˝ x 2⅝˝ $3.8922-1251 330 12.5 Round 1¾˝ diam. x 3˝ $4.2922-1212 370 12.5 Round 1¾˝ d. x 2⅞˝ $4.2922-1254 370 20 Oval 215/16˝ x 115/16˝ x 3˝ $3.9922-1256 370 25 Oval 215/16˝ x 115/16˝ x 2⅝˝ $4.9922-1213 370 25 Oval 1¾˝ x 2¾˝ x 3˝ $4.9922-1214 * 330 30 Round 1¾˝ d. x 2⅞˝ $5.2922-1257 370 30 Oval 215/16˝ x 115/16˝ x 3˝ $5.2922-1215 370 40 Round 1¾˝ d. x 3⅞˝ $6.2922-1216 370 40 Round 2˝ d. x 3⅞˝ $6.2922-1320 § 600 40 Round 2½˝ d. x 4¾˝ $5.9922-1217 440 45 Round 2˝ d. x 4¼˝ $6.9922-1321 § 370 60 Round 2½˝ x 4˝ $6.2922-1295 480 60 Round 7⅝˝ x 2⅝˝ $6.49** Resistor between terminals * Ground lug § M12-1.75 stud mount

Dual Rating Capacitors• New. Size does not include terminals. Shpg. 1 lb.

ITEM Voltage MFD Shape Size Price22-1223 370 20/5 Round 2˝ d. x 2⅞˝ $4.7922-1226 370 25/3 Oval 1¾˝ x 2¾˝ x 3˝ $4.9922-1224 370 25/5 Oval 1¾˝ x 2¾˝ x 3˝ $4.9922-1225 370 25/5 Oval 1¾˝ x 2¾˝ x 4˝ $4.9922-1268 370 25/5 Oval 215/16˝ x 115/16˝ x 2⅝˝ $4.9922-1229 370 30/5 Round 2˝ d. x 3⅞˝ $5.2922-1271 370 30/5 Oval 215/16˝ x 115/16˝ x 3˝ $5.2922-1228 370 30/7.5 Round 2˝ d. x 3⅞˝ $5.2922-1230 440 30/7.5 Oval 1¾˝ x 2¾˝ x 4˝ $5.2922-1227 370 30/10 Round 2˝ d. x 3⅞˝ $5.2922-1274 440 35/7.5 Oval 215/16˝ x 115/16˝ x 4¾˝ $5.3922-1231 440 40/4 Round 2½˝ d. x 3⅛˝ $5.4922-1277 370 40/5 Round 2½˝ diam. x 3˝ $5.4922-1279 440 40/7.5 Oval 321/32˝ x 131/32˝ x 4¾˝ $5.4922-1232 440 40/12.5 Round 2½˝ d. x 3⅞˝ $5.4922-1280 370 45/5 Oval 215/16˝ x 115/16˝ x 3¾˝ $5.6922-1281 370 45/5 Oval 215/16˝ x 115/16˝ x 3¾˝ $5.6922-1282 440 45/5 Oval 321/32˝ x 131/32˝ x 4¾˝ $5.6922-1233 370 45/10 Oval 1¾˝ x 2¾˝ x 4˝ $5.6922-1234 440 45/10 Oval 1¾˝ x 2¾˝ x 4⅞˝ $5.6922-1222 440 55/5 Round 2½˝ d. x 4¼˝ $7.99

Capacitors

Used Motor Run Capacitors• Used, removed from equipment. ITEM MFD Voltage Shpg. Price22-1173 0.39 660 ½ lb. $1.47 22-1313 1 370 ½ lb. $1.99 22-1314 1 660 ½ lb. $1.99 22-1158 1.25 370 ½ lb. $1.79 22-1304 1.5 1600 ¾ lb. $2.99 22-1094 2 370 ½ lb. $1.99 22-1308 2 440 ½ lb. $1.99 22-1161 2 660 ¾ lb. $1.9922-1160 2.5 370 1 lb. $1.99 22-1159 3.75 370 ½ lb. $1.99 22-1309 4 330 ½ lb. $1.99 22-1102 4 370 ½ lb. $1.99 22-1184 4 370 ½ lb. $1.99 22-1187 4 660 ½ lb. $1.99 22-1164 5 250 ½ lb. $1.49 22-1099 5 330 1 lb. $2.99 22-1189 6 330 1 lb. $2.49 22-1103 6 370 ½ lb. $2.49 22-1310 7 330 ½ lb. $1.99 22-1131 7 370 ¼ lb. $1.99 22-1311 7.5 330 ½ lb. $1.99 22-1156 7.5 370 1 lb. $2.99 22-1193 8 330 1 lb. $3.19 22-1302 8 660 1 lb. $2.99 22-1095 10 370 ½ lb. $2.99 22-1194 12.5 330 1 lbs. $3.29 22-1104 12.5 370 1¼ lbs. $3.29 22-1190 14 240 1 lb. $3.79 22-1105-B 15 236 1½ lbs. $3.99 22-1105-C 15 330 1½ lbs. $3.99 22-1105 15 370 1½ lbs. $3.99 22-1183 15 370 1½ lbs. $3.99 22-1196 15 440 ½ lb. $3.99 22-1192 17.5 330 1 lb. $4.15 22-1122 17.5 370 1½ lbs. $4.15 22-1197 17.5 440 1 lb. $4.15 22-1142 20 370 1¼ lbs. $3.99 22-1199 20 480 1¼ lbs. $3.99 22-1106 25 370 2 lbs. $4.99 22-1107 30 330 2 lbs. $4.8922-1174 35 236 3 lbs. $8.95 22-1120 88 1200 9 lbs. $14.95

800-488-3407 Single Phase Motors 123&

5 HP, 230 VAC

ITEM 10-1435$512.95

• Brand new LEESON Model 131537. Ca-pacitor start motor for use with compres-sors, pumps, conveyors, etc. Drip-proofenclosure. No thermal protectionSPECIFICATIONS • 1.15 service factor• 208-230 VAC • Cont. duty• 5 HP • Shaft 1⅛˝ diam. x 2¾˝• 1740 RPM w/keyway• 23-21 amps • 184T frame• 1 phase • Ball bearing• 60 cycle • Size 12½˝ x 10¾˝ x 8˝• Reversible • Shpg. 90 lbs.

5 HP, 208-230 VACCompressorDuty Motor

ITEM 10-2530$194.95

• Brand new, LEESON ELECTRIC Model116523 motor. High torque design forcompressor duty applications. Overloadprotection with manual reset. Steel frameand base. Welded base. Capacitorstart/capacitor run.SPECIFICATIONS• Power 5 HP special • Enclosure ODP• Voltage 208-230 VAC • Duty continuous• Amperage 15 Amps • Frame 56• Speed 3450 RPM • Mount base• Phase 1 • Shaft ⅝˝ diam. x 1⅞˝• Rotation reversible w/ 3/16˝ keyway• Service factor 1.0 • Size 9¼˝ x 7˝ x 8˝• Bearings ball • Shpg. 38 lbs.

5 HP230 VAC

ITEM 10-1093$450.95

• Brand new WEG 005360S1D184T. For hea -vy duty use on air compressors, pumps, etc.SPECIFICATIONS• 230 VAC • Shaft 1⅛˝ diam. x 2¾˝• 5 HP w/keyway• 3500 RPM • 184T frame• 26 amp • No thermal protection• 1 phase • Permanently lubricated• 60 cycles ball bearings• Reversible • Size 12½˝ x 10¾˝ x 8˝• 1.15 service factor (excluding shaft)• Cont. duty • Shpg. 110 lbs.

Farm Duty Motors

• Brand new LEESON heavy duty motors. Highstarting torque. Totally enclosed fan cooled withdouble shielded ball bearings for outdoor use.Capacitor start. Manual reset thermal overloadprotection. Cont. duty, reversible rotation, rigidmount. Single phase.

ITEM HP Voltage Amps RPM Frame Shaft Shpg. Price10-1024 ½ 115/230 8.8/4.4 1725 56 ⅝˝ 25 lbs. $190.9510-1025 ¾ 115/230 10.8/5.4 1725 56 ⅝˝ 28 lbs. $232.9510-1026 1 115/230 14/7 1725 56 ⅝˝ 32 lbs. $259.9510-1027 1½ 115/230 17.2/8.6 1725 56 ⅝˝ 41 lbs. $314.9510-1028 2 230 9.2 1725 56Hz ⅞˝ 48 lbs. $358.9510-1029 3 230 19 1740 184T 1⅛˝ 99 lbs. $547.9510-1323 5 230 23 1740 184T 1⅛˝ 106 lbs. $668.9510-1324 7½ 230 33.6 1740 215T 1⅜˝ 165 lbs. $961.9510-1325 10 230 40 1740 215T 1⅜˝ 197 lbs. $1139.95

Farm Duty Motors

• Brand new WEG Electric Farm Duty motors. Highstarting torque for use with augers, elevators, convey-ors, mills. Totally enclosed fan cooled for use in dustyenvironments. V-ring slinger at each end. Manual resetthermal overload protection. Double shielded ballbearings. Rigid welded base. Reversible.

ITEM HP Voltage Amps RPM Frame Shaft Shpg. Price 10-2289 ½ 115/230 7.4/3.7 1750 56 ⅝˝ x 1⅞˝ 27 lbs. $166.95 10-2290 ¾ 115/230 11/5.5 1745 56 ⅝˝ x 1⅞˝ 30 lbs. $196.95 10-2291 1 115/230 15/7.5 1750 56 ⅝˝ x 1⅞˝ 38 lbs. $205.95 10-2292 1½ 115/230 18/9 1750 56H ⅝˝ x 1⅞˝ 54 lbs. $245.95 10-2293 2 115/230 22/11 1750 G145T ⅞˝ x 2¼˝ 56 lbs. $292.95 10-2294 3 230 14.5 1740 W184T 1⅛˝ x 2¾˝ 83 lbs. $429.95 10-2295 5 230 21 1730 184T 1⅛˝ x 2¾˝ 138 lbs. $498.95 10-2296 7½ 230 32 1730 213/5T 1⅜˝ x 3⅜˝ 175 lbs. $780.95 10-2297 10 230 40 1720 213/5T 1⅜˝ x 3⅜˝ 190 lbs. $901.95

When you are in the area visit our showroom at1015 West “O” Street, Lincoln, NE

TEFC,3500 RPM

Motors• Brand newWEG. Totally

enclosed fancooled motors for a

wide range of applica-tions. Ideal workshop motor for dirty envi-ronments. Capacitor start. Ball bearings.High starting torque. All position mounting.SPECIFICATIONS • Duty continuous• Voltage 115/208-230 AC • No overload protection• RPM 3500 • Shaft ⅝˝ diam. w/keyway• Phase single • Rotation reversible• Service factor 1.15 • Frame 56 rigid

ITEM 10-1901 $148.95• ½ HP, 7.6/3.8 amps. Shpg. 28 lbs.

ITEM 10-1902 $154.95• ¾ HP, 10.6/5.3 amps. Shpg. 31 lbs.

ITEM 10-1903 $196.95• 1 HP, 12.6/6.3 amps. Shpg. 37 lbs.

ITEM 10-1904 $225.95• 1½ HP, 17.0/8.5 amps. Shpg. 40 lbs.

ITEM 10-1905 $293.95• 2 HP, 21.0/10.5 amps. Shpg. 49 lbs.

1.5/.19 HPPool PumpMotorITEM 10-2196-N$39.95• New A.O.Smith Model C48M2A25C1A1pool pump, jet pump motor. Smooth por-tion of shaft is 1⅝˝ long, overall length ofshaft is 23/16˝ measured from bearing. Autooverload thermal protection. Ball bearings.Note: The LOW speed must be energizedbefore the HIGH speed will operate. Themotor must be up to speed before it canbe switched over to the HIGH speed.SPECIFICATIONS• KW 1.1/.14 (1.5/.19 HP) • Enclosure ODP• Voltage 230 AC • Duty continuous• Amps 8.6/2.1 • Shaft ½˝ dia. with ⅜-16• RPM 3450/1725 60 cycle UNC-2A RH threaded end• Rotation CCW • Frame 56Z• Phase 1 • Size 9½˝ x 6½˝ x 6½˝• Service factor 1.0 • Shpg. 26 lbs.


Emerson AC PowerpackReplacement Motors

SPECIFICATIONS FOR BOTH• HP 1 • RPM 3450• Shaft ½˝ dia. x ½˝ 9 T spline • Enclosure TENV

ITEM 10-1987$39.95

• Model 59360.Ball bearings.

SPECIFICATIONS• Voltage 115/230 AC • Frame H56HZ• Amps 14/7 at 60 Hz • Face mount four tapped• RPM 2850/3450 50/60 Hz holes 6⅜˝ B.C.• Rotation CW • Size 9¼˝ x 8½˝ x 8⅝˝• Duty 10 minutes • Shpg. 37 lbs.

ITEM 10-2040$39.95• Made for SPXFluid Power as part4860-AC. Connectionbox on top furnished withoutcover.SPECIFICATIONS• 115/230 VAC 60 Hz • Duty intermittent• Amps 16/8 • Face mnt. 4 bolt on 6⅜˝B.C.• Frame V56HCZ • Size 9¼˝ x 8½˝ x 9˝• Rotation CW • Shpg. 28 lbs.

⅓ HP, 115/230 VACMotor

ITEM 10-2481$42.95

• New, EMERSON ELECTRIC Model 6335general purpose capacitor start motor. Au-tomatic reset thermal overload.SPECIFICATIONS • Bearings ball• Power ⅓ HP • Enclosure ODP• Voltage 115/230 AC • Duty continuous• Amperage 6.8/3.4 Amps • Frame 48• Speed 3450 RPM • Mount rigid welded base• Rotation reversible • Shaft ½˝ dia. x 1⅝˝ w/flat• Phase 1 • Size 7¼˝ x 5½˝ x 7½˝• Service factor 1.35 • Shpg. 17 lbs.

½ HP,1000 RPM

ITEM 10-1376$24.95• New EMERSON. Built for use in garagedoor openers. Requires 70 mfd, 230 VACcapacitor (not incl.)SPECIFICATIONS • Frame 42Y• HP ½ • Duty intermittent• Voltage 115 AC • 60 cycle• Amps 4.5 amp • Shaft ½˝ dia. x 1½˝ w/flat• RPM 1000 • Size 5˝ diam. x 4˝• Rotation reversible • Shpg. 10 lbs.

2 HP, 230 VACITEM 10-2000$69.95

• New LEESON Model C6C34NC15A.Motor runs while integral momentarypushbutton switch is pressed.SPECIFICATIONS• HP 2 • Frame GB56HC• Voltage 230 AC • Enclosure TENV• Single phase, 60 Hz • Mount base and end• Amps 12.5 base slotted 5˝ x 5½˝ ctrs.service factor amps 18 end 4 bolt 5⅞˝ B.C.• RPM 3450 • Shaft ⅝˝ diam. x 1¾˝• Rotation CW w/keyway• Service factor special • Size 9¾˝ x 8¾˝ x 8¾˝• Duty 5 min. • Shpg. 42 lbs.

124 Single Phase Motors www.surpluscenter.com8

1 HP, 115/230 VACMotorw/ Switch

ITEM 10-2553$79.99• New, GENERAL ELECTRIC Model 5KC49 -NN3419Y general purpose motor. Manualreset thermal protection. ON/OFF switch.Pre-wired to 115 VAC, with power cord 8 ft.three prong male plug. Plastic fan shroud.SPECIFICATIONS• Power 1 HP • Enclosure TEFC• Voltage 115/230 AC • Duty continuous• Amperage 13.2/6.6 Amps • Frame 56• Speed 3450 RPM • Mount base• Rotation reversible • Shaft ⅝˝ diam. x 2˝• Phase 1 w/ 3/16˝ keyway• Service factor 1.25 • Size 10¼˝ x 8¾˝ x 815/16˝• Bearings ball • Shpg. 30 lbs.

Single Phase General Purpose Motors• Brand new WORLDWIDE ELECTRIC fractional horsepower motors.

SPECIFICATIONS• Voltage 115/230 AC• Single phase• RPM 1725• Ball bearings• Electrically reversible rotation• Steel motor frame and base• Continuous duty• Service factor 1.15• Shaft ⅝˝ with keyway• Enclosure TEFC• Capacitor start

Overload ITEM HP Amps Frame Mount Encl. Protection Shpg. Price 10-2370 ⅓ 6.6/3.3 56C Face & Base TEFC None 27 lbs. $114.95 10-2376 ⅓ 6.6/3.3 56C Face & Base TEFC Manual 27 lbs. $120.95 10-2371 ½ 8.8/4.2 56C Face & Base TEFC None 29 lbs. $120.95 10-2377 ½ 8.8/4.2 56C Face & Base TEFC Manual 29 lbs. $127.95 10-2372 ¾ 11/5.5 56C Face & Base TEFC None 32 lbs. $131.95 10-2378 ¾ 11/5.5 56C Face & Base TEFC Manual 32 lbs. $137.95 10-2373 1 13.6/6.8 56C Face & Base TEFC None 40 lbs. $146.95 10-2379 1 13.6/6.8 56C Face & Base TEFC Manual 40 lbs. $152.95 10-2374 1½ 15.2/7.6 56C Face & Base TEFC None 46 lbs. $184.95 10-2380 1½ 15.2/7.6 56C Face & Base TEFC Manual 46 lbs. $191.95 10-2375 2 20/10 56C Face & Base TEFC None 52 lbs. $224.95 10-2381 2 20/10 56C Face & Base TEFC Manual 52 lbs. $231.95

Face & Base Resilient

2 HP,3450 RPM

ITEM 10-1582 $79.99• New DOERR. High torque motor. Int.duty. Auto thermal overload protection.Motor runs while integral momentarypushbutton switch is pressed.SPECIFICATIONS• 230 VAC • 5 minute duty• 14.9 amps • Ball bearing• 2 HP • Shaft ⅝˝ diam. x 1⅞˝• 3450 RPM w/flat• 1 phase, 60 Hz • J56C frame• 1.9 service factor • Size 10˝ x 8½˝ x 8½˝• CW • Shpg. 36 lbs.

¼ HP,115 VACMotor

ITEM 10-2608$49.99• New, GENERAL ELECTRIC permanentsplit capacitor motor. Model 5KCP39 -MGB 434AS. Thermally protected, capaci-tor furnished. Continuous duty with air flowover motor.SPECIFICATIONS • Bearings sleeve• Power ¼ HP • Enclosure open• Voltage 115 AC • Duty continuous• Amperage 2.6 Amps • Mount resilient cradle• Speed 1070 RPM • Shaft ½˝ dia. x 1½˝ w/flat• Rotation reversible • Size 6˝ x 7˝ x 6˝• Phase 1 • Shpg. 19 lbs.

800-488-3407 Single Phase Motors 125&

0.115 HP, 120 VACMotorITEM 10-2519$15.99• New, PROTECH Model 1-030-025 per-manent magnet motor. Two M5-0.8 studsextend 1½˝ from opposite end of face on27/16˝ ctrs. Two tapped M5-0.8 holes on25/16˝ ctrs. Motor is 120 VDC with built-inrectifier to operate on 120 VAC.SPECIFICATIONS• Power 0.115 HP • Duty intermittent• Voltage 120 AC • Mount face• Amperage 1.5 Amps • Shaft 5/16˝ diam. x 13/16˝• Speed 3620 RPM w/ flat• Rotation CCW • Size 3˝ diam. x 4¼˝• Torque 32 in.-oz. • Shpg. 4 lbs.

115 VAC 3 Sp.Fan Motor

ITEM 10-2121$5.99• New HOLMES Product Corp. ModelF0508B2935M. Thermally protected.SPECIFICATIONS • Enclosure open• Voltage 115 VAC • Duty continuous• Amps 2.1 • 2 bolt mount on 5.6˝ ctrs.• HP 1/15 • Shaft ⅜˝ diam. x 15/16˝• RPM 1150 max. unloaded • Size 5⅛˝ x 5⅛˝ x 2⅛˝• Rotation CW • Shpg. 5 lbs.

Disc/Belt SanderReplacementMotor

ITEM 10-1791$36.95• New. Disc belt sander replacementmotor made for a major national brand ofpower tools. Requires start relay (not in-cluded).SPECIFICATIONS• Voltage 120 AC • Shaft ⅝˝ x 1¼˝ serrated• Amps 4 • Rotation CCW• RPM 3450 • Shpg. 10 lbs.

Single Shaft Motors• New single shaft motors are ideal replacement for blowers

and fans. Big savings on many different sizes andstyles from various well known motor companies.• All are air over continuous duty or open enclosure,

single phase. All require a capacitor(10-1657 includes one). Rotation facing shaft.

All have ½˝ diam. shaft w/flat except 10-1657 which is 5/16˝.3 Hole Mount10-1707, 10-1710, 10-1121, 10-1716 Open Enclosure

ITEM Mfg. HP Volts Amps RPM Speed Rot. Shaft Cap. Size Shpg. Price

10-1327 GE 1/20 115 0.90 1000 3 CCW 6¾˝ 4 5˝ d. x 5½˝ 7 $15.99

10-1657 FASCO 1/16 460 0.30 3450 1 CCW 3˝ incl. 3¼˝ d. x 5˝ 6 $11.99

10-1710 * GE 1/10 230 0.6 1075 1 CW 4½˝ 4 5½˝ d. x 5˝ 10 $16.99

10-1700 EMERSON ¼ 230 2.2 1050 1 CW 3⅞˝ 10 5⅝˝ d. x 5⅞˝ 12 $20.99

10-1699 FASCO ¼ 240 1.4 1100 3 CCW 5½˝ 5 5½˝ d. x 5˝ 13 $24.99

10-1716 ** GE ¼ 277 1.3 1075 1 CW 3½˝ 5 5½˝ d. x 6˝ 14 $14.99

10-1701 UNIV ELEC ⅓ 208/230 2.6 920 3 CCW 2½˝ 7 5½˝ d. x 5˝ 17 $21.99

10-1702 AO SMITH ⅓ 230 1.4 750 2 CW 8½˝ 7.5 5½˝ d. x 6˝ 18 $21.99

10-1704-A EMERSON ⅓ 380 1.15 930 1 CCW 35/16˝ 5 5½˝ d. x 5˝ 15 $14.99

10-1334 GE ⅓ 400 1.4 825 2 CCW 2½˝ 10 5½˝ d. x 6˝ 16 $15.50

10-1120 UNIV ELEC ½ 208-230 5.9 945 3 CCW 2½˝ 6 5½˝ d. x 5½˝ 17 $28.99

* TENV enclosure ** Enclosed

Dual Shaft Motors• All are air over continuous duty,single phase. Requires capacitor(not included), open enclosure.Shaft diam. ½˝ (lengths are shownin chart). Ideal replacement forblowers and fans. Motors indicatedwith asterisk (*) have 3 bolt mount,ITEM 10-1663 has resilient basemount.

ITEM Mfg. HP Volts Amps RPM Speed Rot. Shafts Cap. Size Shpg. Price

10-1118 * FASCO 1/20 115 2.5 1110 3 CW 4 5½˝ d. x 5½˝ 10 $14.99

10-1660 * FASCO 1/12 115 1.0 1070 2 CW 3 5˝ d. x 4˝ 9 $18.99

10-1123 * AO SMITH 1/12 208/230 0.8 1180 1 CCW 5 5½˝ d. x 4˝ 12 $15.49

10-1125 * RMR CORP. ⅛ 220 1.9 1200 2 CW 5 5½˝ d. x 4˝ 13 $16.79

10-1663 OLMO ⅙ 115 2.4 1075 3 CCW 5 6˝ d. x 4½˝ 15 $19.99

2˝2¼˝4¾˝1⅞˝2½˝3¾˝

2½˝1⅜˝

8¾˝6⅝˝

1/15 HP,115 ACITEM 10-1747$7.99• New UNIVERSAL ELECTRIC. Fan motorwith thermal protection. Oil tubes to shaftbushings. Internal auxiliary centrifugal switchcloses when motor reaches operating speed.SPECIFICATIONS• HP 1/15 • Enclosure open• Voltage 115 AC • Duty continuous• Amps 1.03 • Mount 3 studs from body• RPM 3345 • Shaft ¼˝ dia. x ⅞˝ w/flat• Rotation CW • Size 3⅜˝ diam. x 4⅜˝• Phase 1 • Shpg. 5 lbs.

72 RPM MotorITEM 10-990$29.90

• Used SIGMA. Synchronous motor pro-vides high torque. Rapid start/stop, re-verse. Direct drive (no gear reduction).• Requires 50 watt, 150 ohm resistor and10 mfd, 330 VAC capacitor (not furn.). Dualoutput shaft ⅜˝ and ½˝ diam.SPECIFICATIONS • Cont. duty• Voltage 120 AC • Reversible• RPM 72 • 760 in. oz. torque starting• Amps 1.3 1400 in. oz. holding• 1 phase • Size 4¼˝ diam. x 10˝• 60 cycles • Shpg. 19 lbs.

Ceiling FanMotor

ITEM 10-1134$12.88• New GE. 3 lug mount or hang fromthreaded end cap. Requires 5 mfd capacitor.SPECIFICATIONS • Reversible• Voltage 115 AC • Hollow shaft 17 mm dia.• RPM 225 x 1½˝ w/flat• Amps 1 • Size 5˝ diam. x 3˝• Cont. duty • Shpg. 10 lbs.


126 Three Phase Motors www.surpluscenter.com8

Sever 3 Phase Motors• New SEVER INC. 3 phase motors. Reversiblerotation. TEFC enclosure. Continuous duty.

1.15 service factor. Four bolt basemount (center measurements

shown). Keyed shafts.Voltage 230/460 AC.

ITEM HP RPM Amps Shaft Frame Shpg. Price 10-2130 1½ 1800 5.0/2.5 ⅞˝ x 2¼˝ 145T 37 lbs. $ 139.99 10-2131 1½ 3600 4.0/2.0 ⅞˝ x 2¼˝ 145T 35 lbs. $ 89.99 10-2146 100 3600 229.4/114.7 2⅛˝ x 4¼˝ 405TS 1061 lbs. $1199.99 10-2147 125 3600 284/142 2⅜˝ x 4½˝ 444TS 1325 lbs. $1399.99

60 HP, 460/796 VACOil WellPumpMotor

ITEM 10-2555$899.99• New, MARATHON Model 405TTDS7697oil well pump motor. NEMA D design forextra starting and breakdown torques. Nor-mally Open thermostats for thermal protec-tion. Screens over external openings.SPECIFICATIONS• Power 60 HP • Enclosure ODP• Voltage 460/796 AC • Duty oil well• Amperage 71/41 Amps • Frame 405T• Speed 1200 RPM • Mount rigid base• Rotation reversible • Shaft 2⅞˝ diam. x 7¼˝• Phase 3 w/ ¾˝ keyway• Service factor 1.15 • Size 255/16˝ x 297/16˝ x 19⅞˝• Bearings ball • Shpg. 1060 lbs.

Truck freight only.

Premium Efficiency Three Phase Motors

• Brand new WORLDWIDE ELECTRIC premium efficiency mo-tors. Meets or exceeds NEMA premium efficiency standards.Cast iron frame and base. No overload protection. Availableas base mount only or as face & base mount. Keyed shafts.All motors over 150 lbs. ship truck freight only.SPECIFICATIONS FOR ALL• Voltage 208-230/460 VAC • Electrically reversible • Continuous duty• Service factor 1.15 • Enclosure TEFC • Ball bearings

Base Mount Face & Base MountITEM Frame Price ITEM Frame Price HP Amps RPM Shaft Shpg.10-2580 143T $ 216.95 10-2593 143TC $ 225.95 1 3.29/1.64 1760 ⅞˝ 61 lbs.10-2581 145T $ 263.95 10-2594 145TC $ 274.95 1½ 4.56/2.28 1760 ⅞˝ 64 lbs.10-2582 145T $ 274.95 10-2595 145TC $ 285.95 2 6.05/3.02 1755 ⅞˝ 65 lbs.10-2583 182T $ 348.95 10-2596 182TC $ 363.95 3 8.01/4.01 1765 1⅛˝ 119 lbs.10-2584 184T $ 415.95 10-2597 184TC $ 432.95 5 13/6.5 1750 1⅛˝ 151 lbs.10-2585 213T $ 576.95 10-2598 231TC $ 600.95 7½ 18.6/9.3 1765 1⅜˝ 168 lbs.10-2586 215T $ 698.95 10-2599 215TC $ 727.95 10 24.8/12.4 1760 1⅜˝ 190 lbs.10-2587 254T $ 980.95 10-2600 254TC $1000.95 15 36.4/18.2 1780 1⅝˝ 353 lbs.10-2588 256T $1144.95 10-2601 256TC $1192.95 20 48.2/24.1 1780 1⅝˝ 341 lbs.10-2589 284T $1404.95 10-2602 284TC $1442.95 25 58.4/29.2 1775 1⅞˝ 427 lbs.10-2590 286T $1630.95 10-2603 286TC $1527.95 30 69.4/34.7 1775 1⅞˝ 467 lbs.10-2591 324T $1963.95 10-2604 324TC $2045.95 40 93.1/46.5 1780 2⅛˝ 550 lbs.10-2592 326T $2356.95 10-2605 326TC $2454.95 50 114/57 1780 2⅛˝ 575 lbs.

Base Mount Face & Base Mount

1½ HP,230/460 AC

ITEM 10-1770 $69.95• New MAGNETEK. Three phase industrialmotor. Ball bearings.SPECIFICATIONS• HP 1½ • Enclosure TEFC• Voltage 230/460 AC • Duty continuous• Amps 4.4/2.2 • Mount 143T rigid base• RPM 3420 • Shaft ⅞˝ diam. x 2¼˝• Rotation reversible w/keyway• Phase 3 • Size 11˝ x 10˝ x 7⅝˝• Service factor 1.15 • Shpg. 54 lbs.

125 HP,460 VAC,3 Phase

ITEM 10-1977$1595.00• New RELIANCE MOTORS Duty MasterSeries. Cast-iron housing with ball bearings.SPECIFICATIONS• HP 125 • Rotation reversible• Voltage 460 AC • Enclosure ODP• 3 phase, 60 Hz • Duty continuous• Amps 143.5 • Shaft 2⅛˝ diam. x 4¼˝• RPM 3530 w/keyway• Service factor 1.15 • Size 25˝ x 31˝ x 21˝• Frame 404TS • Shpg. 1000 lbs.

Truck freight only.

1½ HP, 230 VACMotor

ITEM 10-2546 $89.99• New, three-phase motor. Cast iron hous-ing. Ball bearings. Four bolt base mount on4˝ x 5½˝ centers.SPECIFICATIONS • Enclosure TEFC• Power 1½ HP • Duty continuous• Voltage 230 AC • Frame N/A• Amperage 5.3 Amps • Mount base• Speed 1720 RPM • Shaft 22mm diam. x 3½˝• Rotation reversible w/keyway• Phase 3 • Size 10˝ x 9½˝ x 7⅜˝• Bearings ball • Shpg. 44 lbs.

ITEM 10-2546-A $79.99• Same as ITEM 10-2546 above exceptnew takeoffs. Motor is mounted on a re-movable 9˝ square stamped steel pivotbase for belt drive applications. Pivot holesize is ½˝. Shaft 22mm diam. x 2⅛˝ w/key-way. Size 10˝ x 10˝ x 10½˝. Shpg. 45 lbs.


PhaseConverters

• Brand new PHASE-A-MATIC. Allows 3phase electric motorsto be operated on 1phase power. Con-verter is wired in be-tween motor andpower line. 3 phasemotors have advan-tages of lower currentdraw, simple reversing, lighter weight. Theseheavy duty converters are suitable for longstarting, frequent starting and reversing.• 3 phase motor will produce approx. ⅔ ofits rated HP.• Order converters by size of motor beingused with it. All models are for 220 VACpower.

ITEM 11-1876 $167.95• ¾ - 1½ HP, full load amps 5.2. Size 10½˝x 6˝ x 3½˝. Shpg. 3 lbs.

ITEM 11-1877 $188.95• 1-3 HP, full load amps 9.6. Size 10½˝ x 6˝x 3½˝. Shpg. 3 lbs.

ITEM 11-1878 $241.95• 3-5 HP, full load amps 15.2. Size 10½˝ x6˝ x 3½˝. Shpg. 4 lbs.

ITEM 11-3281 $283.95• 4-8 HP, full load amps 22. Size 9½˝ x 5⅛˝x 3˝. Shpg. 4 lbs.

ITEM 11-1879 $388.95• 8-12 HP, full load amps 33.6. Size 14¼˝ x6˝ x 3˝. Shpg. 5 lbs.

ITEM 11-2048 $703.95• 12-18 HP, full load amps 50. Size 13˝ x8½˝ x 6˝. Shpg. 21 lbs.

800-488-3407 Three Phase Motors 127&

Worldwide Electric 3 Phase Motors• Brand new WORLDWIDE ELECTRIC fractional horsepower

three phase motors with steel motor frame and base.SPECIFICATIONS• Voltage 208-230/460• Service factor 1.15• Shaft ⅝˝ with keyway• RPM 1725• Electrically reversible rotation• Enclosure TEFC• No overload protection• Ball bearings• Continuous duty

ITEM HP Amps RPM Frame Shaft Mount Shpg Price 10-2382 ⅓ 1.7-1.6/0.8 1725 56 ⅝˝ Base 23 lbs. $ 93.95 10-2405 ⅓ 1.7-1.6/0.8 1725 56C ⅝˝ Face & Base 23 lbs. $104.95 10-2383 ½ 2.2-2/1 1725 56 ⅝˝ Base 25 lbs. $100.95 10-2406 ½ 2.2-2/1 1725 56C ⅝˝ Face & Base 26 lbs. $110.95 10-2384 ¾ 3-2.8/1.4 1725 56 ⅝˝ Base 27 lbs. $109.95 10-2407 ¾ 3-2.8/1.4 1725 56C ⅝˝ Face & Base 27 lbs. $120.95 10-2385 1 4-3.8/1.8 1725 56 ⅝˝ Base 30 lbs. $122.95 10-2408 1 4-3.8/1.8 1725 56C ⅝˝ Face & Base 30 lbs. $134.95 10-2386 1½ 5-4.8/2.3 1725 56 ⅝˝ Base 34 lbs. $156.95 10-2409 1½ 5-4.8/2.3 1725 56C ⅝˝ Face & Base 35 lbs. $169.95 10-2387 2 6.4-6.2/3 1725 56 ⅝˝ Base 43 lbs. $185.95 10-2410 2 6.4-6.2/3 1725 56C ⅝˝ Face & Base 43 lbs. $200.95

High Efficiency 230/460 VACThree Phase Motors• New, EBC high efficiencythree phase motors. Cast ironhousing. Double shielded ballbearings. No thermal overloadprotection.Shaft ⅞˝ x 2¼˝ w/keyway.

Face & Base Mount Base Mount

ITEM HP Amps RPM Frame Mount Shpg Price10-2497 1 3.2/1.6 1725 143TC Face & Base 58 lbs. $79.9910-2498 1.5 4.4/2.2 1725 145T Base 58 lbs. $84.9910-2501 2 6.2/3.1 1725 145TC Face & Base 68 lbs. $89.99

Electric Motor Slide Mounts• Brand new, WORLDWIDE ELECTRIC T-framemotor slide base. Use to mount a NEMA stan-dard electric motor. Simplifies alignment andpositioning of motor, ideal for tensioning belts.Steel construction with baked-on primer.Washers included.Find dimensional specifications and drawings for these items online.

CompatibleMotor Slide Adjusting Base Mount

ITEM Frame Size Length Screw Centers Foot Print Shpg. Price10-2431-56 56 3˝ 1 7⅝˝ x 5¾˝ 10⅝˝ x 6½˝ 5 lbs. $10.9510-2431-143T 143 3˝ 1 7½˝ x 6¾˝ 10½˝ x 7½˝ 8 lbs. $20.9510-2431-145T 145 3˝ 1 7½˝ x 7¾˝ 10½˝ x 8½˝ 9 lbs. $20.9510-2431-182T 182 3˝ 2 9˝ x 8½˝ 12¾˝ x 9½˝ 13 lbs. $27.9510-2431-184T 184 3˝ 2 9˝ x 9½˝ 12¾˝ x 10½˝ 13 lbs. $27.9510-2431-213T 213 3½˝ 2 10½˝ x 9½˝ 15˝ x 11˝ 18 lbs. $41.9510-2431-215T 215 3½˝ 2 10½˝ x 11˝ 15˝ x 12½˝ 20 lbs. $41.9510-2431-254T 254 4˝ 2 12½˝ x 13¼˝ 17¾˝ x 15⅛˝ 22 lbs. $56.9510-2431-256T 256 4˝ 2 12½˝ x 15˝ 17¾˝ x 16⅞˝ 23 lbs. $56.9510-2431-284T 284 4½˝ 2 14˝ x 15˝ 19¾˝ x 16⅞˝ 27 lbs. $63.9510-2431-286T 286 4½˝ 2 14˝ x 16½˝ 19¾˝ x 18⅜˝ 28 lbs. $63.9510-2431-324T 324 5¼˝ 2 16˝ x 17˝ 22¾˝ x 19¼˝ 38 lbs. $92.9510-2431-326T 326 5¼˝ 2 16˝ x 18½˝ 22¾˝ x 20¾˝ 39 lbs. $92.95

1 HP, 208-230/460 VACMotor

ITEM 10-2392$132.95

• Brand new, WORLDWIDE ELECTRICModel WWE1-18-143T motor. No overloadprotection. Cast iron frame and base.SPECIFICATIONS• Power 1 HP • Nominal efficiency 82.5%• Voltage 208-230/460 VAC • Enclosure TEFC• Amps 3.6-3.4/1.7 • Duty continuous• Speed 1735 RPM • Frame 143T• Phase 3 • Mount base• Rotation reversible • Shaft ⅞˝ dia. x 2½˝ keyed• Service factor 1.15 • Size 10˝ x 9¾˝ x 7⅜˝• Bearings ball • Shpg. 61 lbs.

When you arein the area

visit our showroom at1015 West “O” Street,

Lincoln, NE

28 RPM,115 VAC

ITEM 5-1663 $39.95• New, Franklin Electric Model 6526060400right angle gearmotor. Ad just a ble internallimit switches control shaft rotation from 1to 38 revolutions. Switches can be over-rid-den to allow continuous rotation up to 5minute maximum duty. Four tappedmounting holes in bottom of gear-housing.Auto reset thermal protection.SPECIFICATIONS• Speed 28 RPM • Duty 5 minute• Voltage 115 AC • Enclosure TENV• Amperage 1.3 • Mount 4 bolts on• Power 1/20 HP 2⅞˝ square centers• Torque 26 in-lbs. • Shaft ⅝˝ dia. x 1½˝ keyed• Gear ratio 60:1 • Size 9˝ x 7˝ x 4¼˝• Rotation reversible • Shpg. 10 lbs.

8.4 RPM,230 VAC

ITEM 5-1505 $79.99• New BISON Model 014-500-0199. Paral-lel shaft inline gearmotor. Cast aluminumgear case with lifetime oil-bath lubrication.Mounts at any angle. Ball bearings. Manu-ally reset thermal overload protection.SPECIFICATIONS• RPM 8.4/7 • Duty interrmittent• Voltage 230 AC 60/50 Hz • Frame open• Amps 2.5 • Shaft 1˝ dia. x 1˝ with ⅝˝• HP ⅙ female hex drive socket• Torque 900 in. lbs. cont. • Mount four tapped• Torque 1100 in. lbs. int. holes 2½˝ BC• Gear ratio 199:1 • Size 7½˝ x 12˝ x 6˝• Rotation CW • Shpg. 24 lbs.

6 RPM, 115 VACGearmotor

ITEM 5-1702$9.95

• New, ECI 50KTYZ-1 synchronous motor.Silent operation. Metal housing. Capacitorincluded. Operates at 5 RPM on 50 Hz.SPECIFICATIONS• Speed 6 RPM • Enclosure totally enclosed• Voltage 115 AC • Mount 4 bolts on 27/32˝ B.C.• Amperage 55 mA • Shaft 7 mm dia. x ⅜˝• Power 6 Watts w/ flat & snap-ring groove• Rotation CCW • Size 2½˝ x 27/16˝ x 1⅜˝• Duty continuous • Shpg. 1 lb.

2 RPM, 115 VACInlineGearmotor

ITEM 5-1766$18.95• New, Molon inline gearmotor. Ideal re-placement corn pellet stove, auger motor.Aluminum gear housing. Six 12-24 UNCtapped bolt hole face mount on 2⅜˝ x 2⅜˝or 4¾˝ centers.SPECIFICATIONS • Duty intermittent (5 min)• Speed 2 RPM • Enclosure open• Voltage 115 AC • Mount face• Amperage 1.5 Amps • Shaft ½˝ dia. x 1⅛˝ w/flat• Torque 225 in - lbs. • Size 2.75˝ x 3.5˝ x 4.7˝• Rotation CW • Shpg. 5 lbs.

2 RPM, 120 VACInlineGearmotor

ITEM 5-1737$18.99• New inline gearmotor. Ideal replacementcorn pellet stove auger motor. Aluminumgear housing. Six 10-32 bolt hole facemount on 115/16˝ - 45/16˝ x 2⅜˝ centers.SPECIFICATIONS • Duty intermittent• ECM MF3540 Model 6544• Enclosure open• Speed 2 RPM • Mount six 10-32 bolt face• Voltage 120 AC 115/16˝ - 45/16˝ x 2⅜˝ ctrs.• Amperage 0.59 Amps • Shaft ⅜˝ x 1˝ w/flat• Torque 121 in - lbs. • Size 3¾˝ x 2¾˝ x 4¾˝• Rotation CCW • Shpg. 5 lbs.

1.5 RPM,115 VAC

ITEM 5-1760$18.99• New, MERKLE-KORFF inline gearmotor.Model 4509UI-046. Made to drive augeron corn/pellet stoves. Aluminum gearhousing. Six 10-32 bolt hole face mount on115/16˝ - 45/16˝ x 2⅜˝ centers.SPECIFICATIONS• Speed 1.5 RPM • Enclosure open• Voltage 115 AC • Mount 6 holes on face• Amperage 0.6 Amps • Shaft ⅜˝ dia. x ⅞˝• Torque 16 in. lbs. w/⅜-16 LH thread• Rotation CW • Size 2¾˝ x 2¾˝ x 4¾˝• Duty intermittent • Shpg. 4 lbs.

0.7 RPM,24 VAC

ITEM 5-1735$16.99• New, REX ENGINEERING Model 1537inline gearmotor. Very low current draw,operate from 115:24 volt furnace trans-former (not included). 15 MFD capacitor in-cluded.SPECIFICATIONS • Duty continuous• Speed 0.7 RPM • Enclosure open• Voltage 24 AC • Mnt. five 8-32 holes on face• Amperage 0.4 Amps • Shaft ⅜˝ dia. x ⅞˝ w/flat• Torque 30 in - lbs. • Size 2½˝ x 3˝ x 3½˝• Rotation reversible • Shpg. 3 lbs.

128 AC Gearmotors www.surpluscenter.com8

30 RPM115 VAC

ITEM 10-1671$3.49

• New, HTI Model HTSYG048B030-0001 in-line gearmotor. Motor typically rotates CW,by design it will sometimes rotate CCW.SPECIFICATIONS• RPM 30 • Duty cont.• Voltage 115 VAC • Shaft 5/32˝ square, ¼˝ long• Amps 0.03 • 4 bolt mount on 2¼˝ B.C.• 3 watts • Size 2˝ diam. x ⅞˝ long• Rotation varies • Shpg. ¼ lb.

15 RPM,115 VAC,GearmotorITEM 5-1684$9.95• New, MERKLE-KORFF Model 3715UP-250 compact gearmotor. Thermally pro-tected, shaded pole motor. Metal gearhousing.SPECIFICATIONS • Face mt 3 untapped bosses• Speed 15 RPM • Shaft• Voltage 115 AC Threaded end 5/16˝-18 LH• Amperage 2.7 Amps Base end ⅜˝ dia. x ⅜˝ long• Power 97 Watts at idle Overall lgth. 15/16˝• Rotation CW • Size 3⅜˝ x 2½˝ x 4˝• Duty intermittent • Shpg. 3 lbs.

60 RPM,220 VAC

ITEM 5-1373$5.95• New. Shaded pole gearmotor.SPECIFICATIONS• RPM 60 • Duty intermittent• Voltage 220 AC • Low-speed shaft• Amps 0.18 no load ⅜˝ diam. x 1˝ w/flat• HP 1/30 • Mount 4 bolt face• Torque 33 in. lbs. 2⅜˝ x 2⅜˝ ctrs.• Gear ratio 63:1 • Size 4¼˝ x 2¾˝ x 4¾˝• Rotation CW • Shpg. 7 lbs.

115 VAC Inline Gearmotors• New, inline gearmotors. Ideal replacementcorn pellet stove, auger motor. Originally builtfor Bixby stoves. Aluminum gear housing.

1.8 RPM

ITEM 5-1771$18.95• Four 8-32 UNC tapped bolt hole facemount on 2⅜˝ x 2⅜˝ centers.SPECIFICATIONS• SPG Co. Model ISG-3220BXA(P/N 2051788)• Speed 1.8 RPM • Enclosure open• Voltage 115 AC • Mount face• Amperage 0.4 Amps • Shaft ½˝ dia. x 1¾˝,• Torque 110 in - lbs. ½-13 UNC RH threaded• Rotation CW • Size 3⅜˝ x 2¾˝ x 4¾˝• Duty intermittent (5 min) • Shpg. 5 lbs.

6.5 RPM

ITEM 5-1770$18.95• Four 10-32 UNF tapped bolt hole facemount on 2⅜˝ x 2⅜˝ centers. Integral brake.SPECIFICATIONS• SPG Co. Model ISG-3250BXA(P/N 2051746)• Speed 6.5 RPM • Enclosure open• Voltage 115 AC • Mount face• Amperage 2.65 Amps • Shaft ½˝ dia. x 1¼˝• Torque 225 in - lbs. w/keyway• Rotation CW • Size 5¼˝ x 2¾˝ x 4¾˝• Duty intermittent (1 min) • Shpg. 7 lbs.

743 RPM, 115 VAC InlineGearmotor

ITEM 5-1647 $39.99• Used, BODINE Electric, inline gearmotor.Includes run and start capacitors. Requiresrelay (not included) for start capacitor.SPECIFICATIONS • Rotation CW• Speed 743 RPM • Duty continuous• Voltage 115 AC • Enclosure open• Amperage 9.9 Amps • Mount face 3⅝˝ x 3⅝˝• Power 440 watts • Shaft 16mm x 3½ ̋w/keyway• Torque 44 in - lbs. • Size 5½˝ x 10½˝ x 5½˝• Gear ratio 2.42:1 • Shpg. 36 lbs.

72 RPM SynchronousMotor

ITEM 10-1032$9.95

• Used. SLO-SYN P/N 3325-111OU syn-chronous stepping motor. Direct drive (nogear reduction). Requires 500 ohm 5 wattresistor, and a 0.75 mfd 330 VAC capacitor(not furnished). 4 hole end mount.SPECIFICATIONS• Voltage 120 AC • Cont. duty• RPM 72 • Shaft ¼˝ diam. x ¾˝• Amps 0.1 • 25 in. oz. torque starting• 1 phase 40 in. oz. holding• 60 cycles • Size 3˝ x 2¼˝ x 2˝• Reversible • Shpg. 1½ lbs.

64 RPM,120 VAC

ITEM 5-1588$8.95• New, TUNG NING ELECTRICAL CO. in-line gearmotor. Shaded pole motor. Rearshaft 5 mm (0.2˝) diam. x ¾˝ long, rotatesCCW.SPECIFICATIONS• RPM 64 • Duty intermittent• Voltage 120 VAC • Shaft ¼˝ diam. x 9/16˝• Amps 0.5 at no load w/0.1˝ diam. thru-hole• Torque 40 in-lb. • Three bolt face mount• Gear ratio 45:1 • Size 3½˝ x 2½˝ x 3¾˝• Rotation CW • Shpg. 4 lbs.

800-488-3407 AC Gearmotors 129&

68 RPM, 115 VACGearmotor

ITEM 5-1682 $29.95• Used, MOLON inline gearmotor. Thismotor requires a start relay (not furnished)and a 36-43 mfd. start capacitor (fur-nished). Fan at back end is exposed andshould have a protective shroud for safety.SPECIFICATIONS • Rotation CW• Speed 68 RPM • Duty continuous• Voltage 115 AC • Enclosure open• Amperage 1.9 Amps • Mt 4 hole face 2.645 ̋x 2.645˝• Power 1/10 HP • Shaft ⅜˝ dia x 1˝ w/flat• Torque 60 in - lbs. • Size 5⅝˝ x 3½˝ x 3½˝• Gear ratio 49.4:1 • Shpg. 8 lbs.

62 RPM,115 VACGearmotorITEM 5-1768$8.99• New, Brevel inline gearmotor. Model4590UI-046. Aluminum gear housing.Shaded pole motor. Mounting holestapped 8-32.SPECIFICATIONS • Enclosure open• Speed 62 RPM • Mnt. 4 holes on back face• Voltage 115 AC • Shaft ½˝ dia. x 1½˝ hollow• Amperage 4 Amps threaded 7/16-20 LH• Rotation CW • Size 2½˝ x 2˝ x 54¾˝• Duty intermittent • Shpg. 3 lbs.

75 RPM,120 VACGearmotorITEM 5-1715$6.99• New, ECM Model 34 3406 000 shadedpole gearmotor. Tapped mounting holes#8-32. Shaft extends from opposite side ofmounting holes.SPECIFICATIONS • Enclosure open• Speed 75 RPM • Mount 4 bolt on 1⅝ ̋x 19/16̋• Voltage 120 AC • Shaft ¼˝ diam. x 17/32˝• Amperage 1.8 Amps w/ 3/32˝ diam. pin hole• Rotation CW • Size 2¾˝ x 2¾˝ x 5½˝• Duty intermittent • Shpg. 4 lbs.

80 RPM,120 VAC

ITEM 5-1572$8.95• New BREVEL Model Y. Inline parallelshaft gearmotor.SPECIFICATIONS • 4 hole face mount• RPM 80 19/16˝ x 1¼˝ ctrs.• Voltage 120 VAC • Shaft ⅜˝ diam. x ¾˝• Amps 2 (no load) w/ flat• Rotation CW • Size 3⅛˝ x 2½˝ x 4⅜˝• Duty intermittent • Shpg. 4 lbs.

100 RPM115 AC

ITEM 5-1219$4.95

• New MERKLE-KORFF.SPECIFICATIONS • Duty intermittent• RPM 100 • Shaft 5/16˝ diam. x ½˝• Voltage 115 w/crosshole• Amps 1.25 • Mount front• Torque 4 in. lbs. • Size 2¾˝ x 2½˝ x 5¼˝• Rotation CCW • Shpg. 3 lbs.

115 VAC Garage DoorOpeners

5-1677-A

5-1677

• New takeoffs. Gearmotor assembly re-moved from unused STANLEY garagedoor openers. Consists of right-anglegearmotor mounted on metal base plate.Output shaft protrudes from bottom of as-sembly. Output shaft is 0.11˝ thicksprocket with tooth spacing for 41 pitchroller chain. 3 prong power cord is 42˝ long.SPECIFICATIONS • Rotation reversible• Voltage 115 AC • Duty intermittent• Amperage 4.5 Amps • Enclosure open

ITEM 5-1677-A $9.95SPECIFICATIONS • Shaft 10T sprocket (see above)• Speed 73 RPM • Size 12˝ x 12½˝ x 6½˝• Gear ratio 22.6:1 • Shpg. 16 lbs.

ITEM 5-1677 $9.95SPECIFICATIONS • Shaft 8T sprocket (see above)• Speed 110 RPM • Size 10⅛˝ x 9½˝ x 6½˝• Gear ratio 15:1 • Shpg. 14 lbs.

118 RPM,115 VACITEM 5-1714$6.99• New, shaded pole gearmotor. Tappedmounting holes #8-32.SPECIFICATIONS • Enclosure open• Speed 118 RPM • Mount 4 bolt face 1⅝ ̋x 19/16̋• Voltage 115 AC • Shaft ¼˝ dia. x 15/16˝• Amperage 1.48 Amps w/ 3/32˝ dia. x 1⅛˝ cross pin• Rotation CW • Size 3¼˝ x 2¾˝ x 4˝• Duty intermittent • Shpg. 4 lbs.

135 RPM,115 VACITEM 5-1504$5.99• New MOLON LIM-30146-3. Inline gear-motor. 1.25 mFd capacitor included.SPECIFICATIONS• RPM 135 • Duty intermittent• Voltage 115 AC • Shaft ¼˝ dia. x ⅜˝ w/flat• Amps 0.1 • Mount two bolt face• HP 1/130 211/16˝ ctrs.• Torque 58 in-oz • Size 1⅞˝ x 2⅜˝ x 2⅜˝• Rotation reversible • Shpg. 1½ lbs.

175 RPM,115 VAC

ITEM 5-1054$7.99

• Used MERKL KORFF. Compact yet pow-erful reversible gearmotor. 52.5% dutycycle comes with cooling fan and remov-able cog pulley. 2.5 mfd capacitor required(not incl.)SPECIFICATIONS• 175 RPM • Shaft 5/16˝ dia. x 1½˝ w/flat• 115 volt AC • Size 3¾˝ x 2½˝ x 3½˝• 22 inch oz. torque • Shpg. 4 lbs.

220 RPMGearmotorITEM 5-1179$4.99• New REX ENGINEERING shaded polegearmotor. Intermittent duty.SPECIFICATIONS • CW rotation• RPM 220 • Shaft ¼˝ diam. x ½˝• Voltage 115 AC • Size 3⅛˝ x 3˝ x 3⅛˝• Amps 0.43 • Shpg. 3 lbs.

6-36 VDC

ITEM 10-2411$3.99• New, SEI Part # 555S-2580 permanentmagnet motor.SPECIFICATIONS• Power 19.7 watts • Enclosure open• Voltage 6-36 VDC, • Duty intermittent24 VDC nominal • Face mount 2 bolts on

• Amperage 1.4 amps rated 25 mm ctrs.• Speed • Shaft 3.175 mm x7970 RPM at no load 18.5 mm long w/flat6800 RPM rated • Size 35.8 mm O.D.

• Rotation reversible x 61.5 mm long• Torque 3.90 in-oz. • Shpg. ½ lb.

6-12 VDC

ITEM 10-1801$3.99• New LUNAR CR-505BS. Permanentmagnet motor designed for use in ani-mated design.SPECIFICATIONS • Duty continuous• Voltage 6-12 DC • Mount• Amps 0.8-4.5 no load 2 tapped holes on face 1˝ c/cto max. efficiency • Shaft ⅛˝ diam. x 7/16˝• RPM 18,000 no load 12 V • Size 1½˝ diam. x 2½˝• Reversible • Shpg. 1 lb.

130 DC Motors www.surpluscenter.com8

1/7 HP, 12 VDCMotor

ITEM 10-2520$19.99• New, PROTECH permanent magnetmotor. High torque output.SPECIFICATIONS• Power 1/7 HP • Duty intermittent• Voltage 12 DC • Mount two 10/32 studs• Amperage 13.1 Amps on face, 2½˝ B.C.• Speed 3785 • Shaft 5/16˝ x 1⅛˝• Rotation reversible • Size 3˝ dia. x 4˝• Enclosure TENV • Shpg. 5 lbs.

6 VDC5200 RPMITEM 10-2482$6.99• New, TRW GLOBE Model 405A100 ce-ramic permanent magnet motor. Metalhousing. Face mount two #6-32 tappedmounting holes.SPECIFICATIONS• Voltage 6 DC • Enclosure closed• Amperage 0.2 Amps • Duty continuous• Speed 5200 RPM • Mount face 2 holes on 1 ̋ctrs.• Rotation reversible • Shaft ⅛˝ dia. x ⅜˝ long• Torque 1.5 in.-oz. • Size 1.275˝ dia. x 115/16˝• Bearings sleeve • Shpg. ½ lb.

12/24 VDC Motor

ITEM 10-2413$2.99• New, JOHNSON ELECTRIC Model64823 permanent magnet motor.SPECIFICATIONS• Voltage 12/24 DC • Enclosure open• Amperage 0.2 Amps • Mount 2 holes 25mm c/c• Speed 4700/10000 RPM • Shaft ⅛˝ dia x ½˝ long• Rotation reversible • Size 1.4˝ dia. x 2¼˝• Duty intermittent • Shpg. ½ lbs.

1 HP, 12 DC

ITEM 10-1690 $179.50• New DELCO. Compound wound DC motor.SPECIFICATIONS • Duty intermittent• HP 1 • Mount base• Voltage 12 DC • Dual stepped shafts• Amps 90 1st sec. 0.985˝ dia. x 2.735˝• RPM 1750 2nd sec. 0.875˝ dia. x 4.135˝• Rotation reversible • Size 11½˝ x 7½˝ x 8˝• Enclosure ODP • Shpg. 58 lbs.

WinchMotorITEM 10-1839$99.95• Brand new. Built as replacement motorfor commercial winches. Series wound.SPECIFICATIONS • Frame 3˝ pilot ring• Voltage 12 DC • Mnt. 4 tapped holes 4˝ BC• Amps 50 no load • Shaft ¾˝ diam. x 1¾˝• RPM 8000 w/keyway• Rotation reversible • Size 4˝ x 4˝ x 7¾˝• Duty intermittent • Shpg. 22 lbs.

12 VDC Dual Shaft Motor

ITEM 10-2221$14.95• New PERMCO Model 2809-841-034permanent magnet motor with brushes.Smooth shafts with no keyways or flats.SPECIFICATIONS• Voltage 12 VDC • Open enclosure• Amps 2½ no load • Shafts 5/16˝ dia. x 2 ,̋ smooth• RPM 3200 no load • Size 3¼˝ diam. x 4⅝˝• Rotation reversible • Shpg. 5 lbs.

6 VDC,8600 RPMITEM 10-2412$2.99• New, JOHNSON ELECTRIC Model169324 permanent magnet motor.SPECIFICATIONS • Enclosure open• Voltage 6 DC • Mnt. 2 hole face/25mm c/c• Amperage 1.0 amps (no load)• Shaft ⅛˝ dia. x• Speed 8600 RPM ⅜˝ long serrated• Rotation reversible • Size 1⅜˝ dia. x 2½˝• Duty intermittent • Shpg. ½ lb.

1/11 HP, 12 VDCMotorITEM 10-2521$16.99• New, PROTECH permanent magnet motor.SPECIFICATIONS• Power 1/11 HP • Duty intermittent• Voltage 12 DC • Mount two 10/32 studs• Amperage 8.4 Amps on face, 2˝ B.C.• Speed 2820 • Shaft 5/16˝ x ⅝˝ w/flat• Rotation reversible • Size 2½˝ dia. x 4½˝• Enclosure TENV • Shpg. 5 lbs.

12 VDC ABS BrakesMotorITEM 10-1930$4.99• New. High quality motor originally made foranti-lock brake systems. Unique offset shaftwith bearing to provide the pulsation in the hy-draulic circuit. O-ring on mounting flange forsealing. Also use to cause vibration in sort-ing/shifting equipment by having bearingpress against frame. Designed for int. duty.SPECIFICATIONS• Voltage 12 DC • Bearing on shaft• Amps 7.5 0.64˝ diam. x ¾˝• RPM 4000 approx. • Size 3˝ diam. x 2¾˝• Mount 2 hole 3.4˝ c/c • Shpg. 4 lbs.

12 VDC Motor

ITEM 10-2168 $10.99• New takeoffs VALEO Model 24021540.Permanent magnet type motor. Dual flexibleoutput shafts are ⅛˝ square. (Similar tospeedometer cable).SPECIFICATIONS • Duty intermittent• Voltage 12 VDC • 2 threaded mtg. holes at• Amps 2.5 no load one end of motor body• 4400 RPM • 15˝ end/end on shafts• Rotation reversible • Motor body 1¾˝x 1½˝x 4¾˝• Totally enclosed motor • Shpg. 2 lbs.

12 VDC, 1800 RPMMotors

• Brand new, WORLDWIDE ELECTRIC permanentmagnet motors. Bolt on/off steel base. Class F in-sulation. 20:1 speed range at constant torque.SPECIFICATIONS FOR ALL• Voltage 12 DC • Service factor 1.0 • Frame 56C• Speed 1800 RPM • Bearings ball • Mount face & base• Rotation reversible • Duty continuous • Shaft ⅝˝ x 1⅞˝ w/3/16˝ keyway

ITEM HP Amps Torque Enclosure Size Shpg. Price10-2571 ⅓ 26.4 0.97 lb.ft. TENV 8.1˝ x 5.87˝ x 7.63˝ 20 lbs. $188.9510-2572 ½ 40 1.46 lb.ft. TENV 10˝ x 5.87˝ x 7.63˝ 23 lbs. $222.9510-2573 ¾ 61.2 2.19 lb.ft. TEFC 11.4˝ x 5.87˝ x 7.63˝ 30 lbs. $251.9510-2574 1 82.2 2.92 lb.ft. TEFC 12.2˝ x 5.87˝ x 7.63˝ 35 lbs. $280.95

1 HP, 140 A/200 F DC

ITEM 10-1751$129.95• New GE Model 5BCD56KB265. Shunt wound.SPECIFICATIONS • Enclosed• HP 1 • Duty intermittent• Voltage • Mount 56140 armature/200 field DC• Shaft ⅝˝ diam. x 2˝• Amps 6.09 A/0.165 F w/keyway• RPM 3450 • Size 11˝ x 7¼˝ x 6¾˝• Rotation CW • Shpg. 44 lbs.

3500/6000 RPM2 SpeedFanMotor

ITEM 10-1734 $29.99• New FASCO #93.38.1285.SPECIFICATIONS• Voltage 12 DC • Duty continuous• Amps 1.5/2.1 • Mount 2 bolt on 25/16 ̋ctrs.• RPM 3500/6000 • Shaft ¼˝ diam. x 1⅛˝• Rotation CCW • Size 3˝ diam. x 4⅜˝• Enclosure totally enclosed • Shpg. 4 lbs.

3.3 HP,24 VDCMotor

ITEM 10-2528$189.99• New, GENERAL ELECTRIC Model5BC48JB3047. Built as drive motor forNOR30P Caterpillar stock picker. Verticalmount, dual shafts.SPECIFICATIONS • Top shaft• Power 3.3 HP 15/16˝ dia. x 1½˝ long• Voltage 24 DC w/key slot,• Amperage 32 threaded ¾˝-16 at end• Speed 5100 RPM • Bottom shaft• Rotation reversible tapered 0.98˝ to 0.868˝• Bearings ball in 1.25˝ w/key slot,• Enclosure open frame threaded 20mm at end• Duty intermittent • Size 11⅛ ̋dia. flange x 12¼˝• Frame open (body is 6½˝ dia.)• Mount 4 holes 10.5˝ B.C. • Shpg. 65 lbs.

5200 RPM,12 VDCITEM 10-2489$5.99• New, TRW Globe Model 403A6006-2permanent magnet motor.SPECIFICATIONS• Voltage 12 DC • Bearings sleeve• Amperage 0.3 Amps (no load) • Duty continuous• Speed 5200 RPM (no load) • Mnt. four 6-32 holes face• Rotation reversible • Shaft 5/32˝ dia. x 15/32˝ smooth• Rated torque/current • Size 1.58˝ dia. x 2½˝5 oz.in. /2.3 amps • Shpg. 1 lb.

12 VDCMotor

ITEM 10-2548$14.99• New, MAMCO Model CP-12-132 perma-nent magnet motor. Designed to fit into a4.3˝ dia. opening with O-ring groove in edgeof front mounting flange. Shaft is partiallyrecessed in flange, extends ⅝˝ from face.SPECIFICATIONS • Bearings bronze sleeve• Voltage 12 DC • Enclosure TENV• Amperage 2.5 (no load) • Duty continuous• Speed 4400 RPM (no load) • Shaft 5/16˝ dia. x 1˝• Torque 45 in.oz. at w/threaded end3600 RPM 15 amps • Size 4.33˝ dia. x 4¾˝• Rotation reversible • Shpg. 5 lbs.

4½-12 VDCITEM 10-1741-A$5.29

• New Model FRS-540S. Includes 3 ca-pacitors to filter electrical “noise”.SPECIFICATIONS• Voltage 4½-12 DC • Duty intermittent• Amps 0.62 no load • Mount 2 bolt on 1˝ ctrs.• RPM 8500 no load • Shaft ⅛˝ dia. x ⅝˝ w/flat• Rotation reversible • Size 1⅜˝ diam. x 2¼˝• Enclosure open • Shpg. ¾ lb.

ITEM 10-1741 $3.99• Same as ITEM 10-1741-A above exceptModel FRS-540S-5045D. No capacitors orwire leads (solder on terminals).

800-488-3407 DC Motors 131&

High Speed115 DCMotorITEM 10-1677 $4.99• New JOHNSON. High speed permanentmagnet motor.SPECIFICATIONS • Enclosure open• Voltage 115 DC • Duty continuous• Amps 0.13 no load • Mount 2 hole face mount• RPM 12,000 no load • Shaft 5/32˝ diam. x ½˝• Rotation CW • Size 2½˝ x 1¼˝ x 1½˝• 6000 RPM full load 1.2 amps • Shpg. ½ lb.

3400 RPM,24 VDCITEM 10-1796$9.95• New BUEHLER MOTOR INC. Dual shaft,permanent magnet motor.SPECIFICATIONS • Mount face• Voltage 24 DC 3 bolts on 11/16˝ BC• Amps 0.15 no load • Shafts• RPM 3435 5/32˝ diam. x ¾˝ w/flat• Rotation reversible 5/32˝ diam. x 7/16˝• Enclosure fully enclosed • Size 19/16˝ diam. x 3˝• Duty intermittent • Shpg. 2 lbs.

13.6 VDCMotors• New, JOHNSONpermanent mag-net motors. Metalhousing. Face mountaccepts two M3 x 0.5 machine screws on25 mm B.C.SPECIFICATIONS FOR ALL• Voltage 13.6 DC • Duty intermittent• Mount face • Shaft 3.33 mm (0.131˝) dia.• Rotation reversible x 21/32˝, knurled• Enclosure open, vented • Shpg. 1 lb.

ITEM 10-2463 $1.99SPECIFICATIONS • Model HC615-6605• Amperage 3.5 Amps • Speed 6290 RPM• Torque 6.15 in-oz. • Size 115/32˝ O.D. x 211/32˝

ITEM 10-2464 $1.99SPECIFICATIONS • Model HC615L• Amperage 2.8 Amps • Speed 6100 RPM• Torque 6.1 in-oz. • Size 115/32˝ O.D. x 2⅝˝

ITEM 10-2465 $1.99SPECIFICATIONS • Model HC615-6506• Amperage 1.4 Amps • Speed 4575 RPM• Torque 3.5 in-oz. • Size 115/32˝ O.D. x 211/32˝

5200 RPM,24 VDC

ITEM 10-2491$5.99• New, GLOBE MOTORS Model403A6006-3. Permanent magnet design.Bronze sleeve bearings.SPECIFICATIONS • Bearings sleeve• Power .03 HP • Duty continuous• Voltage 24 DC • Mnt. four 6-32 holes 1˝ B.C.• Amperage 0.15 Amps • Shaft 0.156˝ dia. x 0.5˝• Speed 5200 RPM • Size 1.58˝ dia. x 2.52˝• Rotation reversible • Shpg. 1 lb.

4000 RPM,24 VDCITEM 10-2607$19.99• New, Model 1-030-013, permanent mag-net motor. Built for Cablemaster fromGlendinning Products. High torque output.SPECIFICATIONS• Voltage 24 DC • Duty continuous• Amperage 0.75 Amps • Mount 2 studs(no load) on face 2½˝ c/c• Speed 4000 • Shaft 5/16˝ dia. x 1⅛˝• Rotation reversible • Size 3˝ dia. x 4¼˝• Enclosure TENV • Shpg. 6 lbs.

90 VDC, 1800 RPMMotors

• Brand new, WORLDWIDE ELECTRIC permanentmagnet motors. Bolt on/off steel base. Class F in-sulation. 20:1 speed range at constant torque. Seepage 141 for compatible speed controllers.SPECIFICATIONS FOR ALL• Voltage 90 DC • Service factor 1.0 • Frame 56C• Speed 1800 RPM • Bearings ball • Mount face & base• Rotation reversible • Duty continuous • Shaft ⅝˝ x 1⅞˝ w/3/16˝ keyway

ITEM HP Amps Torque Enclosure Size Shpg. Price10-2575 ⅓ 3.5 0.97 lb.ft. TENV 8.1˝ x 5.87˝ x 7.63˝ 21 lbs. $157.9510-2576 ½ 5.2 1.46 lb.ft. TENV 10˝ x 5.87˝ x 7.63˝ 23 lbs. $202.9510-2577 ¾ 7.8 2.19 lb.ft. TEFC 11.4˝ x 5.87˝ x 7.63˝ 30 lbs. $229.9510-2578 1 10.4 2.92 lb.ft. TEFC 12.2˝ x 5.87˝ x 7.63˝ 33 lbs. $256.9510-2579 1½ 15.4 4.38 lb.ft TEFC 14.38˝ x 5.87˝ x 7.63˝ 40 lbs. $277.95

115 VAC SynchronousTiming Motor

ITEM 10-958-A$1.89

• New. For timing, window display and signanimation, experimental purposes, etc.SPECIFICATIONS• 120 VAC • CCW rotation• 4.5 watts • Shaft 3/16˝ dia. 9 T gear• 60 Hz • Mount 2 bolt on 1⅞˝ ctrs.• Continuous duty • Size 1⅞˝ x 2˝ x 2½˝• 50 RPH • Shpg. 1 lb.

120 VAC SynchronousTiming Motor

ITEM 10-2332$3.99• New. For timing, window display and signanimation, experimental purposes, etc.Motor typically rotates CW, by design it willsometimes rotate CCW.SPECIFICATIONS• 120 VAC • Rotation varies• 3.5 watts • Shaft 5/32˝ sq. x ¼˝ long• 60 Hz • 2 hole mount on 2¼˝ ctrs.• Continuous duty • Size 29/16˝ x 2˝ x 1˝• 16 RPM • Shpg. ½ lb.

115:12 VACTransformers

• New. Built for use in power supplies of12 volt decorative lighting systems. Allsizes are 115 VAC in, 12 VAC out.

ITEM 15-1076 $4.99• 3 amp cap. 3˝ x 2˝ x 2½˝. Shpg. 3 lbs.



132 Motor Controllers & Phase Converters www.surpluscenter.com8

Variable SpeedDC MotorControl

ITEM 11-3304$205.95• Brand new, WORLD WIDE ELECTRICModel WDCCONT variable speed DCmotor controller. Designed for DC perma-nent magnet, shunt wound and some uni-versal (AC/DC) motors. Enclosed andgasketed cover rated NEMA 4/12. Integralpotentiometers for setting minimum andmaximum speed, acceleration and decel-eration, torque and IR compensation.ON/OFF switch and speed control poten-tiometer on cover face. Heatsink inte-grated into housing.SPECIFICATIONS• Input voltage 120/240 VAC• Output: 90 VDC at 120 VAC, 180 VDC at 240 VAC• Amperage F.L.A. 10.8 amps DC• Speed regulation/range1% regulation over 50:1 speed range• HP range⅛ HP to 1 HP at 90 VDC, ¼ HP to 2 HP at 180 VDC• Mount 4 bolt on 5⅛˝ x 5½˝ centers• Size 7˝ x 59/16˝ x 3¼˝ • Shpg. 4 lbs.

ITEM 11-3304-R $315.95• Same as ITEM 11-3304 above exceptModel WDCCONTREV variable speed DCmotor controller with reverse. Integral po-tentiometers for setting minimum andmaximum speed, acceleration and decel-eration, torque and IR compensation.FWD/OFF/REV switch and speed controlpotentiometer on cover face.

Order Resistor Order Fuse ITEM # ITEM # $3.45 $3.45

DC MotorController

ITEM 11-2102$172.95• Brand new. Multi-drive solid state DCspeed control. For operating permanentmagnet or shunt wound motors. Completewith dual voltage switch for input voltagesof 120 VAC or 240 VAC, line fuse, ON/OFFswitch, and variable speed dial.• Runs ¾ HP, 90-130 VDC motors on 120VAC input; 1½ HP, 180 VDC motors with240 VAC input. With auxiliary heatsinkraise HP rating to 1 HP at 120 VAC inputand 2 HP at 240 VAC. Requires plug-in HPresistor and fuse (not incl. - see below).Shpg. 3 lbs.

Plug-in HP Resistorand Motor Fuse

• Order ITEM number(s) corresponding toyour HP requirement. AC Line Voltage 120 VAC 240 VAC Motor Voltage90-130 VDC 180 VDC at HP Listed at HP Listed 1/12 - ⅛ ⅙ - ¼ 11-2102-R37 11-2102-F39 ⅛ - ⅕ ¼ - ⅓ 11-2102-R38 11-2102-F40 ⅙ ⅓ 11-2102-R38 11-2102-F41 ¼ ½ 11-2102-R39 11-2102-F42 ⅓ ¾ 11-2102-R40 11-2102-F43 ½ 1 11-2102-R41 11-2102-F44 ¾ 1½ 11-2102-R42 11-2102-F45 1* 2* 11-2102-R43 11-2102-F46* Requires auxiliary heatsink.

Auxiliary HeatsinkITEM 11-2102-H$45.95

Braking SwitchITEM 11-2102-S

$79.95• Optional forward/brake/reverse switch.Provides resistance in circuit for brakingand also reverses motor. Shpg. 1 lb.

SCR Motor SpeedControl forDC Motors

ITEM 11-2269 $75.95• Brand new MINARIK Model MM23001C.Adjustable SCR speed controller for per-manent magnet or shunt wound, brushtype motors. Ideal for motors in the rangeof 1/20 HP to 2 HP. Compact design in in-dustry standard MM footprint. Optionalheatsink (sold separately) can be added toboost output current capacity. Integral po-tentiometers for setting minimum andmaximum speed, acceleration and de cel -era tion, torque and IR compensation.Speed control potentiometer included.SPECIFICATIONS • 5 amps output,• Input 115 or 230 VAC, 10 amps w/heatsink50/60 Hz • ⅛ HP to 1 HP at 90 VDC• Armature voltage • ¼ HP to 2 HP at 180 VDC(115 VAC IN): 90 VDC • 1% regulation over(230 VAC IN): 180 VDC 60:1 speed range• Size 45/16˝ x 319/32˝ x 119/32˝ • Shpg. 2 lbs.

HeatsinkITEM 11-2269-H $36.95• Heatsink drilled and tapped for use withITEM 11-2269 DC motor controller. Size6⅞˝ x 4⅜˝ x 1˝. Shpg. 2 lbs.


Full WaveBridge

Rectifier

ITEM 22-1206 $4.99• New. Change AC to DC. Use with adequatesize heat sink (not supplied). Center holemount. Rated 1000 VAC, 35 amps. ¼˝ spadeterminals. Size 1⅛˝ x 1⅛˝ x ⅞˝. Shpg. ¼ lb.

High AmperageDC CircuitBreakers

$21.95 each• Brand new BUYERS direct current circuitbreaker. Plastic housing with rubber gas-ket, rubber caps for terminal studs. Pushbutton trip, manual reset. Waterproof.SPECIFICATIONS FOR ALL• Max. voltage 30 VDC • Mount two hole• Terminal studs ¼-28 on 27/16˝ ctrs.• Size 215/16˝ x 115/16˝ x 1⅜˝ • Shpg. ¼ lb.

ITEM Amperage11-3317-30 30 Amps11-3317-50 50 Amps11-3317-60 60 Amps11-3317-90 90 Amps11-3317-100 100 Amps11-3317-120 120 Amps11-3317-150 150 Amps

40 RPM, 12 VDCRight-AngleGearmotors

• Brand new, BUYERS PRODUCTS. Hightorque, right-angle gearmotor built to fitcommon truck and trailer tarp systems.Forged drive gear, aluminum gearboxhousing and motor end-cap, steel motorhousing. Gearbox is sealed to preventcontamination. Includes a chromed plasticbolt-on cover and mounting hardware.Shaft has two 5/16˝ cross-holes spaced ¾˝apart. Five mounting holes in face of gear-box tapped 5/16˝-18.

ITEM 5-1719 $188.95SPECIFICATIONS • Rotation reversible• P/N 5543095 • Duty intermittent• Speed 40 RPM • Totally enclosed• Voltage 12 DC • Mount five tapped holes• Amperage 33-50 Amps • Shaft ¾˝ x 3⅛˝• Power 0.53 HP w/ two cross-holes• Torque 836 in-lbs. • Size 10˝ x 6˝ x 3⅜˝• Gear ratio 90:1 • Shpg. 14 lbs.

ITEM 5-1720 $203.95SPECIFICATIONS • Rotation reversible• P/N 5543895 • Duty intermittent• Speed 40 RPM • Totally enclosed• Voltage 12 DC • Mount five tapped holes• Amperage 33-75 Amps • Shaft ¾˝ x 3⅛˝• Power 1.2 HP w/ two cross-holes• Torque 1890 in-lbs. • Size 11⅛˝ x 6˝ x 3⅜˝• Gear ratio 90:1 • Shpg. 16 lbs.

100 RPM, 12 VDCGearmotor

ITEM 5-1649$59.95• Brand new, STATURE ELECTRIC ModelRA-AFSL-30AN-35 right-angle gear-motor.Ball bearings and bronze bushings, steelworm gear, brass output gear and die castaluminum gearbox. Two pole, permanentmagnet motor with internal brushes. Threemounting holes tapped for M6 machinescrews. Rated to withstand 300 in-lbs.max back-drive torque.SPECIFICATIONS• Speed 100 RPM • Rotation reversible• Voltage 12 DC • Duty intermittent• Amperage 3.0 no load, • Fully enclosed, IP546.0 cont., 62 peak • Face mount, tapped holes

• HP 1/30 cont. • Shaft 7/16˝ dia. x 27/16˝ w/flat• Torque 20 in-lbs. cont. • Size 7⅜˝ x 3⅛˝ x 4⅜˝• Gear ratio 35:1 • Shpg. 7 lbs.

140 RPM, 12 VDCGearmotorITEM 5-1765$11.95

• New, compact inline permanent magnetgearmotor.SPECIFICATIONS• Speed 140 RPM • Mount 3 M3 tapped holes• Voltage 12 DC on face• Amperage • Shaft 5mm dia. x 10mm0.13 Amps (no load) w/flat

• Rotation reversible • Size 27/16˝ dia. x 1¼˝• Duty intermittent • Shpg. ½ lb.

12 VDC Motorw/ Gear Train

ITEM 5-1651$8.95

• New BUEHLER MOTOR Model 1.13.022 -.212.03 right angle gearmotor. Bronze wormgear off the motor shaft drives two plasticspur gears. Output shaft extends from faceof final gear in the gear train.SPECIFICATIONS• Speed 48 RPM • Mount two tapped• Voltage 12 DC holes on 1.658˝ ctrs.• Amperage 69 mA (no load) • Shaft 0.33˝ diam. x 0.33˝• Rotation reversible • Size 5⅞˝ x 1⅝˝ x 2¾˝• Duty continuous • Shpg. 1½ lbs.

12 VDC RotaryActuator

ITEM 5-1362-A$29.95• Used takeoffs, excellent condition.Polypropylene case. Originally built to op-erate valves. No limit switchesSPECIFICATIONS• Voltage 12 volt DC • Rotation reversible• RPM 18.33 • Shaft ½˝ diam. with• Amps running 0.5 ¼˝ male tang• Amps stall 1.5 • Mount two ¼˝-20 studs• Torque running 35 in. lbs. on 2˝ centers• Torque stall 65 in. lbs. • Size 4˝ x 4˝ x 4˝• Duty intermittent • Shpg. 4 lbs.

2 RPM, 12 VDCGearmotorITEM 5-1763$14.95• New, inline gearmotor. Slotted stainlesssteel shaft. Plastic, iron and steel gearswith heat treatment on final output gear.Die cast zinc gear housing.SPECIFICATIONS• Speed 2 RPM • Duty continuous• Voltage 12 DC • Shaft 3/8˝ dia. x 3.8˝• Amperage 0.8 Amps • Shaft slot(fully loaded) 0.118 wide x 1˝ long• Torque 75 in - lbs. • Size 2¾˝ x 3˝ x 2½˝• Rotation reversible • Shpg. 1 lb.

ITEM 5-1763-A $14.95• Same as ITEM 5-1763 above except 10˝leads and cap over motor connections.

1.6 RPM, 12 VDCInlineGearmotorITEM 5-1741$18.99• New, RP2020 inline gearmotor. Ideal re-placement corn pellet stove auger motor.Aluminum gear housing. Six 10-32 bolt holeface mount on 115/16˝ - 4⅜˝ x 2⅜˝ centers.SPECIFICATIONS • Duty continuous• Speed 1.6 RPM • Enclosure open• Voltage 12 DC • Mount face• Amperage 350 mA • Shaft ⅜˝ diam. x 1˝ w/flat• Torque 78 in - lbs. • Size 3¾˝ x 2¾˝ x 4¾˝• Rotation reversible • Shpg. 3 lbs.

800-488-3407 12 VDC Gearmotors 133&


• New, Molon Model CHM-1245-1. Slottedoutput from gearbox. Includes 1˝ dia. x 8⅝˝long 5 section rubber drive roller for output.SPECIFICATIONS• Speed 42 RPM • Duty continuous• Voltage 12 DC • Mount 4 holes 2½˝ x 2⅜˝• Amperage 0.85 Amps • Shaft 5/16˝ female w/3/16˝ slot• Torque 8 in - lbs. • Size 2¾˝ x 2¾˝ x 3˝• Rotation reversible • Shpg. 2 lbs.

21 RPM,12 VDC

ITEM 5-1624$32.99• New takeoffs, Buehler Model1.61.031.111.06. right angle gearmotor.Permanent magnet motor. Shaft can bechanged from right to left side output.SPECIFICATIONS• 21 RPM (no load) • Duty intermittent• Voltage 12 VDC • Mount 3 hole on 1¾˝• 0.2 amps (no load) • Shaft 8mm x 1⅞˝• Torque 48 in-lbs. stall • Size 6½˝ x 3⅛˝ x 2⅜˝• Rotation reversible • Shpg. 3 lbs.

20 RPM, 12 VDCInline

GearmotorITEM 5-1726$49.95

• New, T & L INTERNATIONAL permanentmagnet inline gearmotor.SPECIFICATIONS • Enclosure TENV• Speed 20 RPM • Mount 4 bolt on• Voltage 12 DC 2⅜˝ x 3⅜˝ centers• Amperage 13 Amps • Shaft ½˝ diam. x ⅞˝• Torque 16.75 in - lbs. w/dual flats• Rotation reversible • Size 7⅝˝ x 3⅛˝ x 3⅞˝• Duty intermittent • Shpg. 8 lbs.


6 RPM, 12 VDC ParallelShaft

Gearmotor

ITEM 5-1748$59.99

• New, permanent magnet, parallel shaftgearmotor. Cast aluminum gear housingand motor end cap with steel motor frame.12 VDC electro-mechanical brake on rearof motor with manual release lever.SPECIFICATIONS• Speed 6 RPM • Enclosure TENV• Voltage 12 DC • Mount four bolt face• Amperage 19 Amps on 3.38˝ x 3.38˝ centers• Torque 850 in-lbs • Dual shafts ¾˝ dia. x 1¼˝• Holding torque 500 in-lbs. w/ ¼˝ crosshole• Rotation reversible • Size 9¼˝ x 3⅞˝ x 6¼˝• Duty intermittent • Shpg. 12 lbs.

12 VDCWiperMotorITEM 5-1767$19.99• New, right angle gearmotor with revers-ing geartrain to give back and forth sweep-ing motion. Originally for rear window ofSUV. Could also be used for animated dis-plays requiring similar movement. Integralpark position switching. Shaft has taperedserrated section and male 8mm x 1.25thread to attach wiper arm (not included).SPECIFICATIONS• Speed 30 cycles/min. • Mount 2 angled tabs on• Voltage 12 DC bracket & threaded• Amperage 0.5 Amps on shaft housing• Rotation approx. 165° arc • Shaft 0.393˝ dia.• Duty continuous x 0.75˝ overall length• Size 7˝ x 7½˝ x 4˝ • Shpg. 3 lbs.


ITEM 5-1754$13.99

• New, permanent magnet, right anglegearmotor. Cast aluminum gear housingwith steel motor frame. Hollow squarethru-drive output shaft. Two bolt rubberisolation mount.SPECIFICATIONS• Speed • Duty intermittent500 RPM no load • Enclosure TENV250 RPM at rated torque • Mount ⅜˝ dia. two bolt

• Voltage 12 DC on 2.2˝ centers• Amperage 16 Amps • Hollow thru-shaft 5/32 ̋(4 mm)• Torque 8.5 in-lbs • Size 5¼˝ x 3⅛˝ x 2½˝• Rotation reversible • Shpg. 3 lbs.

12 VDC GearmotorCable-Reel

ITEM 5-1581-R$12.95• New, DENSO. Permanent magnet, right-angle gearmotor with cable reel. Reversemotor polarity to extend/retract 3/32˝ steelcable. Originally built for retracting seatbelts in cars. No clutch or limit switches,motor stalls at end of cable travel. Hightorque gearmotor.SPECIFICATIONS • 3 bolt mount• RPM 150 at no load • Reversible rotation• Voltage 12 VDC • 3/32˝ steel cable, plastic jacket• 40˝ max cable travel • Size 11˝ x 5½˝ x 3½˝• Amps 3.5 at no load • Shpg. 5 lbs.


• New, PROTECH right angle permanentmagnet gearmotor. Ideal for use withspeed control (not included). Externally ac-cessible brushes. IEC 320 C13 connectoron 25˝ cord.SPECIFICATIONS • Duty continuous• Speed 250 RPM • Enclosure TENV• Voltage 125 DC • Mount four ¼-20 tapped• Amperage 0.5 Amps holes in base 13/16˝ sq.• Power 1/12 HP • Shaft ½˝ dia. x 11/16˝• Torque 10 in - lbs. then 5/16˝ hex x 11/16˝• Gear ratio 10:1 • Size 7½˝ x 4⅛˝ x 2⅞˝• Rotation reversible • Shpg. 6 lbs.

1.5 VDC AnimationMotorITEM 5-1692$3.99

• New, HANKSCRAFT MOTORS, batteryoperated motor with gear reduction drivinga pivoting arm. Holes to mount hanginglightweight objects at each end of arm. Greatfor animation. Low torque output. Should bemounted flat. Operates on 1 D cell battery.Geartrain and battery exposed, no powerswitch (runs when battery is in place).SPECIFICATIONS• Voltage 1.5 VDC • Arm travel• Cycles/minute 33 3⅜˝ side 1• Arm lgth. 7⅝˝ 1⅝˝ side 2• Rotation reversible • Size 4¾˝ x 4⅝˝ x 1⅞˝• Arm rotation 45° • Shpg. ½ lb.

134 DC Gearmotors www.surpluscenter.com8

580 RPM, 240 VDC InlineGearmotor

ITEM 5-1681-AV $99.95• New, COLORTRONIC Model 23771 per-manent magnet inline gearmotor. 4 boltface mount has 10-32 tapped holes.HEDS-5600 optical encoder on back ofmotor.SPECIFICATIONS • Rotation reversible• Speed 580 RPM • Duty continuous• Voltage 240 DC • Mount 4 face 2.65 ̋sq. ctrs.• Amperage 0.52 Amps • Shaft 12mm diam.• Power 93 Watts x 15/16˝ w/ keyway• Torque 1.4 Nm (12.4 in-lbs.)• Size 10˝ x 4˝ x 3¾˝• Gear ratio 3.1:1 • Shpg. 10 lbs.


ITEM 5-1685$14.95

• New, MERKLE-KORFF parallel shaftgearmotor. Die-cast gear housing. Six un-tapped mounting holes for #8 thread-form-ing screws.SPECIFICATIONS • Duty intermittent• Speed 62 RPM • Mount• Voltage 9 DC Six thru-holes on• Amperage 0.23 no load 21/16˝ x 123/32˝ centers• Gear ratio 46.1:1 or• Rotation reversible 21/16˝ x 229/32˝ centers• Shaft 5/16˝ dia. x ⅞˝ • Size 3¼˝ x 2½˝ x 3⅝˝w/flat & snap-ring groove • Shpg. 2 lbs.

59/120 RPM,12/24 VDCITEM 5-1667-K$99.95

• New, BISON Model 071-300-0028 inlinegearmotor.SPECIFICATIONS • Duty continuous• Speed 59/120 RPM • Enclosed• Voltage 12/24 DC • Mount 4 bolt base on• Amperage 9.6/10.4 Amps 1½˝ x 4˝ ctrs.• Power 62/125 Watts • Shaft 14 mm dia. x 1⅜˝• Torque 8.5 Nm (75.2 in-lbs) w/ keyway• Gear ratio 28:1 • Size 10¼˝ x 5˝ x 6˝• Rotation reversible • Shpg. 12 lbs.

95 RPM,36 VDCITEM 5-1044$14.99• New, BREVEL Model 780-953075 inlinepermanent magnet gearmotor.SPECIFICATIONS • Duty continuous• Speed 95 RPM (no load) • Fully enclosed• Voltage 36 DC • Mnt. 4 tapped holes on face• Amperage 1.2 Amps • Shaft 5/16˝ dia. x 1˝ w/flat• Torque 12 in - lbs. • Size 5½˝ x 3¼˝ x 3¼˝• Rotation reversible • Shpg. 3 lbs.

128 RPM,36 VDC

5-1423-R Pictured

• MAGNETEK. Heavy duty, series woundgearmotor. Built for subway door openers.Operates on 36 volts DC. Available with ei-ther left or right output shaft. Large alu-minum gearbox housing for ruggedapplications.SPECIFICATIONS• RPM 128 • Shaft 1¼˝ dia. x 1⅜˝ long• Voltage 36 DC stepped to ⅝˝ dia. x ⅞˝ long• Amps 0.8 at 36 VDC no load w/keyway• Ratio 14:1 • Mount base• Rotation reversible • Size 15˝ x 4½˝ x 7½˝• Duty continuous • Shpg. 20 lbs.

ITEM 5-1423-R $59.99ITEM 5-1423-L $59.99


ITEM 5-1687$89.95• Used PARVALUX permanent magnetright angle gearmotor. Heavy duty con-struction.SPECIFICATIONS • Rotation reversible• Speed 30 RPM • Duty continuous• Voltage 50 DC • Mount base• Amperage 1.3 Amps • Shaft 15 mm x 2˝ w/keyway• Torque 62 in - lbs. • Size 9˝ x 5˝ x 5½˝• Gear ratio 96:1 • Shpg. 16 lbs.

50 Volt DC GearheadMotor

ITEM 5-1549 $59.99• New Parvalux permanent magnet rightangle gearhead motor. Heavy duty con-struction.SPECIFICATIONS• Voltage 50 DC • Shaft 15 mm x 2˝ w/keyway• Amps 1.3 • Base mount• Gear ratio 96:1 • Continuous duty• RPM 30 output speed • Totally enclosed motor• Torque 62 in. lbs. • Size 9˝ x 5˝ x 5½˝• Reversible rotation • Shpg. 16 lbs.

82 RPM, 24 VDC RAGearmotor

ITEM 5-1769$24.95• New, VALEO Model 404.392 right anglepermanent magnet gearmotor.SPECIFICATIONS• Speed 82 RPM • Mount 3 holes on 2˝ B.C.• Voltage 24 DC • Shaft 10mm dia. x• Amperage 1.3 Amps 13/16˝ w/flat• Rotation reversible • Size 6¾˝ x 2½˝ x 3¾˝• Duty intermittent • Shpg. 3 lbs.


ITEM 5-1693$14.95• New, MABUCHI inline parallel shaft gear-motor. Die-cast gear housing. Mountingholes are drilled and tapped with 10-32thread.SPECIFICATIONS • Enclosure open• Speed 109 RPM • Mount 4 bolt face on• Voltage 24 DC 2⅜˝ x 2½˝ centers• Amperage 78 mA (no load)• Shaft 5/16˝ dia. x ⅜˝ w/ flat• Rotation reversible • Size 2⅞˝ x 2¾˝ x 33/16˝• Duty intermittent • Shpg. 2 lbs.

& 800-488-3407 24 VDC Gearmotors 135

35 RPM,24 VDC

ITEM 5-1257$12.95• New take-offs MOLON. Inline parallelshaft gear motor. Rated 24 volt DC, will runon 12 volt DC at lower speed and torque.SPECIFICATIONS • Duty continuous• RPM 35 • Shaft 5/16˝ x ¾˝ long w/flat• Voltage 24 DC • Mount face 2⅜˝ x 2½˝• Torque 38 in. lbs. full load drilled/tapped• Torque 7.5 in. lbs. cont. • Size 2¾˝ x 3˝ x 23/16˝• Rotation reversible • Shpg. 2 lbs.

68 RPM,24 VDCITEM 5-1447$18.99• New BUEHLER.SPECIFICATIONS • Rotation reversible• RPM 68 • Duty intermittent• Voltage 24 DC • Shaft 0.2˝ dia. x ⅜˝ w/flat• Amps 50 mA • Mount face• Watts 1.2 • Size 1⅜˝ diam. x 2⅝˝• Torque 14 in. oz. • Shpg. ¾ lb.

24 VDC Gearmotors

• New, TRW Globe compact inline gear-motors. Spur gear reducer, permanentmagnet motor.SPECIFICATIONS • Mount three #4-40 tapped• Voltage 24 DC hole on face, 1.062˝ B.C.• Amperage 0.40 Amps • Shaft 3/16˝ dia. x 7/16˝ w/flat• Rotation reversible • Size 17/16˝ dia. x 2½˝• Duty continuous • Shpg. ¾ lb.

ITEM 5-1728 $13.95SPECIFICATIONS• Model 415A6113 • Torque 30 oz.in.• Speed 210 RPM • Gear ratio 24:1

ITEM 5-1729 $13.95SPECIFICATIONS• Model 415A6016 • Torque 100 oz.in.• Speed 22 RPM • Gear ratio 240:1

18 RPM,24 VDC

ITEM 5-1421 $18.99• New BUEHLER PRODUCTS.SPECIFICATIONS• RPM 18 • Duty intermittent• Voltage 24 DC • Shaft 0.2˝ dia. x ¾˝ w/flat• Amps 36 mA no load • Mount 1 bolt in face• Torque 3 in. lbs. • Size 17/16˝ diam. x 2¾˝• Rotation reversible • Shpg. 1 lb.

15 RPM, 24 DC

ITEM 5-1451$4.95• New CKD Model J209-056. DC synchro-nous motor attached to removable mtg.bracket.SPECIFICATIONS• RPM 15 • Shaft 3/16˝ diam. x• Voltage 24 DC ½˝ long w/flat• Amps 0.2 no load • Mount 2 bolt on 313/32˝ BC• Rotation CW • Size 4˝ x 1¾˝ x 2˝• Duty intermittent • Shpg. 1 lb.

16 RPM,24 VDCITEM 5-1571$11.95• New, inline gearmotor. Steel gears,spade terminals.SPECIFICATIONS• RPM 16 • Fully enclosed• Voltage 24 VDC • Shaft 5 mm dia. (0.196 )̋ w/flat• 50 mA no load • 3 tapped mounting holes• Torque 25 in-oz. (calculated) in face on 11/16˝ B.C.• Rotation reversible • Size 15/16˝ diam. x 2¾˝• Duty int. • Shpg. ¼ lb.

30 RPM,24 DC

ITEM 5-1358$34.95• New MULTI-PRODUCTS CO. INC.#2738. Offset gearbox.SPECIFICATIONS• RPM 30 • Duty continuous• Voltage 24 DC • Shaft 11 mm dia. x 12 mm• Amps 0.68 no load w/dual flats• HP 1/45 • Mnt. 4 bolt 2½˝ x 2˝ pattern• Torque 47 in. lbs. • Size 4½˝ x 3˝ x 4¾˝• Rotation reversible • Shpg. 5 lbs.

24 RPM, 24 VDC

ITEM 5-1529$16.99• New ITT AUTOMOTIVE Model 402.757.Inline gearmotor.SPECIFICATIONS• Voltage 24 DC • Totally enclosed• 50 mA at no load • Shaft 6 mm x 18 mm w/flat• RPM 24 • Mount four tapped in• Torque 30 in. oz. face 11/16˝ x 1⅛˝ ctrs.• Rotation reversible • Size 3¼˝ x 1½˝ x 1⅜˝• Duty continuous • Shpg. ¾ lb.

45 RPM, 24 VDCInlineGearmotor

ITEM 5-1660$9.95• New, Molon Model CHM-2435-1. Hightorque output. 4⅞˝ wheel with o-ring onedge to friction drive equipment. Use fordrive wheel on robots. Operates at ½ speedon 12 VDC. Permanent magnet motor.SPECIFICATIONS • Duty continuous• Speed 45 RPM • Mount 4 tapped holes• Voltage 24 DC 2⅜˝ x 2½˝• Amperage 0.28 • Shaft 5/16˝ dia.• Torque 7.5 in-lbs. • Size 2¾˝ x 2¼˝ x 3˝• Rotation reversible • Shpg. 1½ lbs.

56 RPM,24 VDCITEM 5-993$7.49• Used. Permanent magnet.SPECIFICATIONS• 24 VDC • Cont. duty• 56 RPM • Shaft 3/16˝ x ½˝• Reversible • 1¼˝ diam. x 3˝• 30 ma • Shpg. ½ lb.


138 RPM,24 VDC

ITEM 5-1667-I $119.95• New, BISON Model 021-828-1028 rightangle gearmotor with right hand output. 4bolt mtg. flange on 3⅛˝ bolt circle pattern,drilled and tapped with ¼˝-20 holes, 60 mm(2.36˝) diam. pilot ring.SPECIFICATIONS• Speed 138 RPM • Duty intermittent• Voltage 24 DC • Enclosed• Amperage 5.5 Amps • Mount 4 bolt flange• Power 1/10 HP • Shaft 12 mm dia. x 1¾˝• Torque 30 in - lbs. w/ keyway• Gear ratio 28:1 • Size 9½˝ x 4⅛˝ x 4½˝• Rotation reversible • Shpg. 11 lbs.

ITEM 5-1667-J $119.95• New, BISON Model 021-828-1028L.Same as ITEM 5-1667-I above except lefthand output, amperage 6.2 amps.

30 Amp, 12 VDC PolarityReversing Switches

$9.50 eachITEM 11-3334 Maintained action

ITEM 11-3334-A Momentary action

Find more information online!

MountingBracket Kit

ITEM 5-1577-B$11.95• Brand new mounting bracket kit for usewith 5-1577 series 107 lb. actuators. Brack -et and mounting pad are made from billetaluminum. Includes hardware. Sold individ-ually, order 2 kits per actuator.SPECIFICATIONS• ClevisInside width 0.795˝ • Base mnt. bolt spacing ⅞˝Outside width 1½˝ • Size 111/16˝ x 1½˝ x 1½˝Throat depth 0.810˝ • Shpg. ¼ lb.

10 ft. ExtensionHarness

ITEM 5-1577-H $17.95• Brand new. Ten foot wiring harness al-lows linear actuator to be mounted up toten feet away from the actuator controller.Shpg. ¼ lb.

Heavy Duty LinearActuatorMountingBracketKit

ITEM 5-1679-B $31.95• Brand new mounting bracket kit for usewith 500 pound and 1000 pound I.D. serieslinear actuators. Made from billet alu-minum. Includes mounting hardware. Soldindividually, order 2 kits per actuator.SPECIFICATIONS• ClevisInside width 1⅛˝; Outside width 2½˝; Throat depth 1¼˝• Size 2.75˝ x 2.50˝ x 2.45˝ • Shpg. 2 lbs.

136 Linear Actuators www.surpluscenter.com8

Controller Kit

ITEM 5-1577-C $56.95• Brand new linear actuator controller kitfor use with 107 lbs. linear actuators.Pushbuttons give manual control of traveland can be programmed to move actuatorto any of three operator determined presetpositions. Indicator light shows at which ofthese custom presets unit is currently po-sitioned. Once programmed the displayunit can be removed and three SPST mo-mentary switches (not included) added tomake actuator move to preset positions atthe press of a button.• Controller kit includes central controlunit, user input display, two wiring har-nesses, mounting hardware and instruc-tions. Shpg. 1 lb.

Dual Linear ActuatorController KitITEM 5-1577-C-2 $89.95• Brand new linear actuator controller kitfor use with two 107 lbs. linear actuators.Same features as a single control kit ex-cept includes a 3 position slide switch oncontrol box that allows control of either ac-tuator independently or both at the sametime. When controlling both actuators theycan be set up for simultaneous or sequen-tial movement. Shpg. 1 lb.

• Brand new. Built-in potentiometer allowsfor use with position-sensing circuits.Metal housing is water resistant andsealed against dust. Non-adjustable limitswitches at end of stroke both directions.SPECIFICATIONS • Permanent magnet motor• 12 VDC • 107 lb. max load capacity• Amps • 550 lb. max static capacityno load 0.6, full load 3.4 • Pin holes 5/16˝

• 0.59 in/sec. at max load • Shpg. 5 lbs.

ITEM 5-1577-2 $85.95SPECIFICATIONS • Retracted lgth. 7.68˝• Stroke 50mm (1.96˝) • Size 8¼˝ x 1½˝ x 3˝






12 VDC 107 lb. Linear Actuators

12 VDC, 500 lb. & 1000 lb. Linear Actuators

• Brand new heavy duty linear actuators.500 lb. actuators have ACME screw drive,1000 lb. actuators have ball screw. Metalhousing is water resistant and sealedagainst dust. Permanent magnet motor.No limit switches or potentiometer.

500 lb. Linear ActuatorsRetracted.

ITEM Model Stroke Lgth. Size Shpg. Price5-1679-4 LACT4A-500A 4.01˝ (102mm) 10.24˝ 11.24˝ x 3.04˝ x 5.97˝ 9 lbs. $186.955-1679-6 LACT6A-500A 6.02˝ (153mm) 12.24˝ 13.24˝ x 3.04˝ x 5.97˝ 11 lbs. $188.955-1679-8 LACT8A-500A 8.03˝ (204mm) 14.25˝ 15.25˝ x 3.04˝ x 5.97 13 lbs. $191.955-1679-12 LACT12A-500A 12.04˝ (306mm) 18.26˝ 19.26˝ x 3.04˝ x 5.97 17 lbs. $199.955-1679-18 LACT18A-500A 18.07˝ (460mm) 28.96˝ 29.96˝ x 3.04˝ x 5.97˝ 16 lbs. $211.955-1679-24 LACT24A-500A 24.1˝ (630mm) 34.97˝ 35.97˝ x 3.04˝ x 5.97˝ 18 lbs. $215.951000 lb. Linear Actuators

Retracted.ITEM Model Stroke Lgth. Size Shpg. Price5-1680-4 LACT4-1000B 3.31˝ (84mm) 12.03˝ 13.03˝ x 3.04˝ x 5.97˝ 9 lbs. $248.955-1680-6 LACT6-1000B 5.31˝ (135mm) 14.17˝ 15.17˝ x 3.04˝ x 5.97˝ 11 lbs. $251.955-1680-8 LACT8-1000B 7.32˝ (186mm) 16.03˝ 17.03˝ x 3.04˝ x 5.97˝ 13 lbs. $253.955-1680-12 LACT12-1000B 11.34˝ (288mm) 20.04˝ 21.04˝ x 3.04˝ x 5.97˝ 17 lbs. $259.955-1680-18 LACT18-1000B 18.07˝ (459mm) 28.96˝ 29.96˝ x 3.04˝ x 5.97˝ 23 lbs. $281.955-1680-24 LACT24-1000B 24.10˝ (612mm) 34.97˝ 35.97˝ x 3.04˝ x 5.97˝ 20 lbs. $291.95

SPECIFICATIONS FOR 500 lb.• Push/Pull: Dynamic 500 lbs. max: Static 1000 lbs. max• Extension speed: No load 0.71 in/sec; Max. 0.51 in/sec• Duty 25% • Amps• Enclosure IP54 no load 2, full load 24• Pin holes ½˝ • Shaft dia. 1⅛˝

SPECIFICATIONS FOR 1000 lb.• Push/Pull: Dynamic 1000 lbs. max: Static 3000 lbs. max• Extension speed: No load 0.98 in/sec; Max. 0.55 in/sec• Duty 25% • Pin holes ½˝• Enclosure IP54 • Shaft dia. 1⅛˝

12 VDC, 6˝ Stroke, 110 lb.Linear Actuator

ITEM 5-1777 $79.95• New, Model LACT6 light duty 6˝ nominalstroke linear actuator. Metal housing iswater resistant and sealed against dust.Permanent magnet motor. Non-adjust ablelimit switches at end of stroke both direc-tions. No potentiometer.SPECIFICATIONS• Stroke nominal 6˝ • Duty 20%• Voltage 12 DC • Avg. ext. speed 0.5˝/sec.• Push/pull ratings • Pin holes ¼˝Dynamic 110 lbs. max • Retracted length 10⅛˝Static 500 lbs. max • Size 10⅞˝ x 1⅝˝ x 3¼˝• Amps 3.5 • Shpg. 5 lbs.

24 VDC Linear Actuator

ITEM 5-1753 $49.99• New, WARNER ELECTRIC M-Track 1Model 01-D024-0050-A06-LP-IP65 lightduty linear actuator. Built-in potentiometerallows for use with position-sensing cir-cuits. Metal housing is water resistant andsealed against dust. Permanent magnetmotor. Non-adjustable limit switches atend of stroke both directions.SPECIFICATIONS• Stroke 150 mm (6˝) • Amps• Voltage 24 DC No load 0.4, full load 1.5• Push/Pull ratings • Enclosure IP65Dynamic 50 lbs. max • Pin holes ¼˝Static 300 lbs. max • Retracted lgth.• Extension speed 294 mm (11.57˝)No load 0.59 in/sec • Shaft dia. 20 mm (0.787˝)Max load 0.45 in/sec • Size 12⅛˝ x 1½˝ x 3˝• Duty 25% • Shpg. 5 lbs.

800-488-3407 Linear Actuators 137&

115 VAC 3˝ LinearActuator

ITEM 5-1360$59.95• New VON WEISE. 115 volt AC linear ac-tuator. Built-in limit switches. Thermal pro-tection.SPECIFICATIONS • Pin holes ⅜˝• Voltage 115 AC • Intermittent duty• HP 1/10 • Travel speed 10 in./min.• Amps 1.6 • Retracted lgth. 8¾˝• Stroke 3˝ max. • Size 9¾˝ x 3¼˝ x 6˝• 600 lbs. capacity • Shpg. 10 lbs.

12 VDC LinearActuator

ITEM 5-1554$29.95• New takeoffs VALEO. Linear actuatororiginally made for use in electric automo-tive seats. No clutch or limit switches. Per-manent magnet type motor. SPECIFICATIONS• Model 24021541 • 15/16˝ stroke• Voltage 12 VDC • Travel 15/16˝ in 3 sec.• Amps 1.5 no load • Duty intermittent• Rotation reversible • ¼˝ diam. pin hole base• Totally enclosed motor • Shaft 7/16˝ diam. threaded• Threaded output shaft has 13/16˝ x 13/16˝ x 13/16˝steel block with ⅜˝-18 tapped hole in side• Size 5½˝ x 2⅜˝ x 4¾˝ • Shpg. 4 lbs.

12 VDC Right SideWindow ActuatorITEM 5-1707-R$19.95• New, gearmotor / lin-ear actuator assembly.Origi nally built to raiseand lower car win-dows. Consists of agearmotor, plastic pul-leys, steel cable and asteel frame with a plas-tic slider. Right side.No limit switches or clutch, motor stalls atend of travel both directions.SPECIFICATIONS • Right side• Travel 11⅞˝ • Reversible• Voltage 12 VDC • Speed 11⅞˝ in 2.5 sec.• Amperage at no loadNo Load 3.5 Amps • Size 16˝ x 7¾˝ x 2¾˝Stall 13.5 Amps • Shpg. 4 lbs.

12 VDC ,500 lb. LinearActuatorITEM 5-1759$99.95

• New, heavy duty linear actuator. ACMEscrew drive with built-in overload clutch.Metal housing is water resistant andsealed against dust. Permanent magnetmotor. No limit switches or potentiometer.SPECIFICATIONS • Amps• Stroke 100 mm (3.94˝) no load 2, full load 24• Voltage 12 DC • Duty 25%• Push/pull ratings • Enclosure IP65dynamic 500 lbs. max. • Pin holes ½˝static 1000 lbs. max. • Retracted lgth. 10.24˝• Extension speed • Shaft dia. 1⅛˝no load 0.71 in/sec. • Size 11.24˝ x 3.04˝ x 5.97˝max. load 0.51 in/sec. • Shpg. 11 lbs.

12 VDC, 18˝ Stroke, 50 lb.Linear Actuator

ITEM 5-1773 $89.95• New, Model LACT18 light duty 18˝ nom-inal stroke linear actuator. Metal housing iswater resistant and sealed against dust.Permanent magnet motor. Non-adjust ablelimit switches at end of stroke both direc-tions.SPECIFICATIONS • Duty 20%• Stroke nominal 18˝ • Avg. extension• Stroke actual speed 1˝/sec.450 mm (17.71˝) • Pin holes ¼˝

• Voltage 12 DC • Retracted lgth.• Push/pull ratings 563 mm (22.17˝)Dynamic 50 lbs. max • Shaft dia. 20 mm (0.787˝)Static 500 lbs. max • Size 22¾˝ x 1⅝˝ x 3¼˝

• Amps 3 • Shpg. 6 lbs.

12 VDC, 6˝ StrokeLinear Actuators

• New, Model LACT6P light duty 6˝ nomi-nal stroke linear actuator. Metal housing iswater resistant and sealed against dust.Permanent magnet motor. Built-in poten-tiometer allows for use with position-sens-ing circuits. Non-adjustable limit switchesat end of stroke both directions.SPECIFICATIONS FOR ALL• Stroke nominal 6˝ • Pin holes ¼˝• Voltage 12 DC • Retracted lgth. 11½˝• Amps 3.5 • Size 123/16˝ x 1⅝˝ x 3¼˝• Duty 20% • Shpg. 5 lbs.

27.5 lb., 6˝ StrokeITEM 5-1778-A $69.95• Push/pull: Dynamic 27.5 lbs. max., Static125 lbs. max. Avg. extension speed 1.5˝/sec.

110 lb., 6˝ StrokeITEM 5-1778-B $79.95• Push/pull: Dynamic 110 lbs. max., Static500 lbs. max. Avg. extension speed 0.5˝/sec.

220 lb., 6˝ StrokeITEM 5-1778-C $79.95• Push/pull: Dynamic 220 lbs. max., Static1000 lbs. max. Avg. extension speed 0.5˝/sec.

12 VDC Linear Actuators

ITEM 5-1761-R ITEM 5-1762-L

$14.95 each• New, linear actuator originally made foruse in electric automotive seats. No clutchor limit switches. Permanent magnet typemotor. Traveling nut has ⅞˝ wrench flats.Output is when viewed from motor endwith output shaft above motor centerline.SPECIFICATIONS• Voltage 12 VDC • Duty intermittent• Amps 1.5 no load • Mount ¼˝ clevis,• Travel 2¼˝ ⅜˝ between ears• Extension time • Shaft 7/16˝-8 ACME thread6 seconds full travel w/M6x1 LH at end

• Rotation reversible • Overall size 6˝ x 2½˝ x 5½˝• Fully enclosed • Shpg. 3 lbs.

ITEM 5-1762-R Right hand output

ITEM 5-1762-L Left hand output• Same as ITEM 5-1761-R with auxiliarysocket for ⅛˝ cable drive out rear of motor.

ITEM 5-1761-R Right hand output

ITEM 5-1761-L Left hand output


Cast IronMower BladePulleyAssembly

ITEM 1-3580-A$19.95• New, Mfg. part # 18344. Built for com-mercial grade riding mowers to driveblades. Ball bearings. Includes debrisshield for lower bearing. Grease zerk.SPECIFICATIONS • Lower pilot dia. 211/16˝• Pulley 4½˝ dia. ⅝˝ belt • Thread for blade bolt ½-20• Pulley center to blade • Mtg. 4 holes on 5¼˝ B.C.mtg. face 4⅞˝ • Size 6˝ dia. x 6¼˝

• Upper pilot dia. 3¾˝ • Shpg. 12 lbs.

215 CFM, 115 VACCentrifugal DoubleBlower

ITEM 16-1405-A $46.99• New, FASCO 25-7607 Model 70023528centrifugal double blower. Ideal for use oncorn or wood stoves and other generalpurpose air movement. Metal housing andplastic blower wheels. Rubber isolationbase mount.SPECIFICATIONS• Flow 215 CFM max. • Mount 6 hole base• Voltage 115 AC • Inlets 3˝ dia.• Amperage 1.5 • Outlets 4⅝˝ x 19/16˝• Speed 3000 RPM • Size 4¾˝ x 12¾˝ x 4¾˝• Duty continuous • Shpg. 9 lbs.

200 CFM, 115 VACCentrifugal DoubleBlower

ITEM 16-1405 $44.99• New, FASCO 25-7607 Model 702111 703centrifugal double blower. Ideal for use oncorn or wood stoves and other generalpurpose air movement. Metal housing andblower wheel. Rubber isolation basemount.SPECIFICATIONS • Duty continuous• Flow 200 CFM max. • Mount 6 hole base• Voltage 115 AC • Inlet 2½˝• Amperage 1.25 • Outlet 411/16˝ x 1⅝˝• Power 1/40 HP • Size 4½˝ x 15½˝ x 4⅝˝• Speed 2700 RPM • Shpg. 9 lbs.

120 CFM,115 VACBlower

ITEM 16-1436$29.95

• New, McMILLAN I283-AK-475/1 P/N2051762 blower. Ideal for use on corn orwood stoves and other general purpose airmovement. Metal housing and blower wheel.SPECIFICATIONS• Flow 120 CFM max. • Mount 5 hole flange tabs• Voltage 115 AC • Inlet 6˝• Amperage 1.35 • Outlet 19/16˝ x 3⅝˝• Speed 3000 RPM • Size 8½˝ x 6˝ x 9¼˝• Duty continuous • Shpg. 8 lbs.

100 CFM,115 VAC

ITEM 16-1353$19.99

• Used, FASCO squirrel cage blower. Plas-tic housing and wheel. Metal plate withtwo mounting studs on inlet side. Fur-nished with run capacitor.SPECIFICATIONS• Flow 100 CFM approx. • Mount 2 studs on face• Voltage 115 AC • Blower wheel 5¼ ̋dia. x 1¼˝• Amperage 0.41 Amps • Inlet 3¾˝ dia.• Power 1/40 HP • Outlet 1½˝ x 2¼˝• Speed 3000 RPM • Size 8½˝ x 8˝ x 5˝• Duty continuous • Shpg. 5 lbs.

25 CFM,115 VAC

ITEM 16-1021-B$5.99

• Used ROTRON Biscuit centrifugalblower. Cast aluminum housing.SPECIFICATIONS • Outlet 1˝ x 2½˝• Model CB2A3 • Blower wheel• CFM 25 3¼˝ diam. x ⅝˝• Voltage 115 AC • 3 hole mount 3.78˝ x 4.13˝• Watts 17 • Size 5˝ x 1⅝˝ x 5½˝• Inlet 2¾˝ • Shpg. 3 lbs.

25 CFMCyclohmBlower

ITEM 16-1021$5.99

• Used, HOWARD Industries Cyclohmblower. Aluminum body.SPECIFICATIONS• 25 CFM • Discharge 2½˝ x 1˝• 115 VAC, 19 watts • 3 hole mount• Squirrel cage 3¾˝ dia. x ¾˝ • Size 5˝ x 5˝ x 1½˝• Inlet 3¼˝ diam. • Shpg. 3 lbs.

138 AC Blowers www.surpluscenter.com8

56 CFM, 115 VACDraft Inducer

Blower

ITEM 16-1385$24.99

• New, KUNSHAN FAN TECH CO.MF3542-CN (CY124) draft inducer blower.Ideal for use on corn or wood stoves, fur-naces and other general purpose air move-ment. Metal housing and blower wheel.SPECIFICATIONS• Flow 56 CFM max. • Mount 5 hole flange• Voltage 115 AC • Inlet 5˝• Amperage 0.2 • Outlet 1⅝˝ x 2⅝˝• Speed 2300 RPM • Size 7⅜˝ x 5½˝ x 8⅝˝• Duty continuous • Shpg. 7 lbs.

190 CFM, 120 VACCrossflow Blower

ITEM 16-1393 $29.99• New, EBM QR06A-2/106351 crossflowblower. Type number QR06A-2EM42AB.Originally designed for 19˝ rack mount forcooling electronic equipment. Inlet onflange mount side. Aluminum blowerwheel. Steel blower housing with plasticend caps. Ball bearings. Includes filter matand retainer.SPECIFICATIONS • Ambient temp. 40° C• Flow 190 CFM max. • Mount 4 hole flange• Voltage 120 AC 185/16˝ x 3˝• Amperage 0.34 • Inlet 16⅜˝ x 3˝• Speed 2670 RPM • Outlet 16½˝ x 115/16˝• Sound level 55 dBA • Size 6½˝ x 19¾˝ x 3½˝• Duty continuous • Shpg. 7 lbs.

60 CFM, 115 VACCentrifugalBlower

ITEM 16-1404-A$39.99• New, FASCO 25-7615 Model 702 111 713centrifugal blower. Ideal for use on corn orwood stoves and other general purpose airmovement. Metal housing and blowerwheel.SPECIFICATIONS • Duty continuous• Flow 60 CFM max. • Mount 3 hole 4˝ O.D. flange• Voltage 115 AC • Inlet 2½˝ O.D. tube• Amperage 0.42 • Outlet 2⅛˝• Power 1/25 HP • Size 6¼˝ x 6˝ x 6⅝˝• Speed 3030 RPM • Shpg. 6 lbs.

Ceiling FanMotor

ITEM 10-2240-A$3.95• New, electric motor assembly for a four-blade, 52˝ ceiling fan. Fan blades not in-cluded. Antique brass finish. Lower sectionhas pull chain for 3 speeds and OFF, alsoreversing switch. Extra power lead forpowering a light (not included). Mountingbracket is 8¼˝ long, 1⅞˝ inside width. Ro-tating section is 7˝ diameter 7˝ overallheight. Eight holes tapped M6-1.0 formounting four fan blades (not included).SPECIFICATIONS• Voltage 115 AC • Rotation reversible• Amperage 0.6 Amps • Duty continuous• Speeds 3 • Shpg. 11 lbs.

500 CFM230 VAC

ITEM 16-958-B$32.95• Used Howard Industries Model 5-50-5100. Ball bearing, quiet running. Steel cir-cular housing. Three curved blades. Goodcondition. Grill guard furnished.SPECIFICATIONS• 500 CFM • Discharge 9˝ diam.• 230 VAC, 0.4 amps • Blower wheel 8⅝˝• Intake 9˝ diam. • Size 10½˝ x 3½˝• Mounting lip ⅞˝ • Shpg. 6 lbs.

320 CFM, 115 VACCentrifugal

DoubleBlower

ITEM 16-1403$49.99

• New, FASCO 25-7620 Model 70731675centrifugal double blower. Ideal for use oncorn or wood stoves. Metal housing andblower wheel. Thermally protected.SPECIFICATIONS• Flow 320 CFM max. • Mount 4 hole flange• Voltage 115 AC 4⅛˝ x 1½˝• Amperage 1.27 • Inlet 4¾˝• Power 1/40 HP • Outlet 3⅜˝ x 3˝• Speed 1320 RPM • Size 8˝ x 12⅜˝ x 8¾˝• Duty continuous • Shpg. 12 lbs.

105 CFM,115 VAC

ITEM 16-1441$11.95• New, muffin fan, very quiet. Aluminumframe. Spade terminal connections.SPECIFICATIONS • Mount 4⅛˝ x 4⅛˝• Flow 105 CFM max. • Blade dia. 4⅝˝• Voltage 115 AC • Number of blades 5• Amperage 0.28 • Size 4¾˝ x 4¾˝ x 1½˝• Speed 3000 RPM • Shpg. 2 lbs.

97 CFM,115 VAC

ITEM 16-1325$14.95• New ETRI Model 133LP. Plastic housingand fan blade. Impedance protected.SPECIFICATIONS • Sleeve bearings• CFM 97 • 3 blade• Voltage 115 AC • Fan blade diameter 4¼˝• Hertz 50/60 cycle • Mount 4 bolts 4⅛˝ sq. ctrs.• Amps 0.17/0.15 • Size 411/16˝ x 411/16˝ x 1½˝• Power 13/12 watts • Shpg. 2 lbs.

85 CFM,115 VAC

ITEM 16-1439$9.95• Brand new, Thermocool axial fan ModelG12038MAS. Aluminum frame. Spade ter-minal connections. Sleeve bearings. 44dba noise level.SPECIFICATIONS • Mount 4⅛˝ x 4⅛˝• Flow 85 CFM max. • Blade dia. 4⅝˝• Voltage 115 AC • Number of blades 5• Amperage 0.22 • Size 4¾˝ x 4¾˝ x 1½˝• Speed 2600 RPM • Shpg. 2 lbs.

70 CFM,115 VAC

ITEM 16-1363$11.95• New, FULLENERGY Model 106-0009.Metal frame with plastic fan blades.SPECIFICATIONS• Flow 70 CFM max. • Blade dia. 4⅜˝• Voltage 115 AC • Number of blades 7• Amperage 0.09 Amps • Size 4¾˝ x 4¾˝ x 1˝• Mount 4⅛˝ sq. • Shpg. 1 lb.

34 CFM,115 VAC

ITEM 16-1443$9.95• New, IMC Mini Boxer fan. Model3610PS-12T-B30. Ball bearings, fingerguard included. 38db. Aluminum case,push-on terminals.SPECIFICATIONS• Flow 34 CFM max. • Mount 3 holes• Voltage 115 AC • Blade dia. 3⅜˝• Amperage 0.13 • Number of blades 5• Power 9 Watts • Size 3⅝˝ x 3⅝˝ x 1˝• Speed 3100 RPM • Shpg. 1 lb.

800-488-3407 AC Blowers & Fans 139&

112 CFM,220 VACFanITEM 16-1359$7.99• New, JARO Model AA1282US-AT. Diecast housing, sleeve bearings. 48 db rating.SPECIFICATIONS • Mount 4 hole 4⅛˝ square• Flow 112 CFM max. • Blade diam. 4¾˝• Voltage 220 AC • Number of blades 5• Amperage 0.11 • Size 4¾˝ x 4¾˝ x 1½˝• Speed 2700 RPM • Shpg. 2 lbs.

198 CFM, 120 VAC Fans

16-1365 16-1366

16-1367

• Brand new, Thermocool axial fan. Highairflow and low noise for cooling electricalequipment or general air circulation. Metalhousing with plastic blades. 59db rating.SPECIFICATIONS FOR ALL• Flow 198 CFM max. • Speed 2900 RPM• Voltage 120 AC • Blade dia. 5½˝• Amperage 0.4 Amps • Number of blades 5• Power 38 Watts • Shpg. 2 lbs.

ITEM 16-1365 $19.95SPECIFICATIONS• Model G17050HASB • Ball bearings• Mnt. 4 holes on 6⅜˝ b.c. • Size 6¾˝ dia. x 2˝

ITEM 16-1366 $19.95SPECIFICATIONS• Model G17050 • Ball bearings• Mount 4 holes • Size 6.75˝ x 5.9˝ x 2˝

ITEM 16-1367 $19.95SPECIFICATIONS• Model G15050HAST • Sleeve bearings• Mount 4 holes, 413/16˝ sq. • Size 5.9˝ x 5.9˝ x 2˝

210 CFM,115 VACFan

ITEM 16-1408$23.95• New, SINWAN Model S150AN-11-1. Alu-minum housing with thermoplastic fanblade. Includes finger guard grille and 96˝cord (no plug on end). Ball bearings. Im-pedance protected motor.SPECIFICATIONS• Flow 210 CFM max. • Speed 3200 RPM• Voltage 115 AC • Mount 4 holes• Amperage 0.23 Amps • Blade dia. 5½˝• Power 32 Watts • Number of blades 5• Sound level 53 db • Size 6¾˝ x 6˝ x 1½˝• Static pressure 0.65˝ H2O • Shpg. 3 lbs.

Double InletBelt-Drive

CentrifugalBlowers

• New, LAU belt-drive centrifugal blower.Features include galvanized steel housingand blower wheel, sealed bearings withrubber isolators, dual inlets, balancedblower wheel and extended shaft on eachside for mounting pulley. Performance rat-ings in specifications do not include drivelosses. Performance curves for this itemcan be found on our website.

ITEM 16-1392 $79.99SPECIFICATIONS• Model BLA10-10ACD.75BB• Flow with ¾ HP motor2250 CFM at 1025 RPM at 1.0˝ H20• Flow with 1 HP motor2250 CFM at 1200 RPM at 1.5˝ H20• Shaft ¾˝ x 1½˝ w/keyway • Outlet 13⅛˝ x 11⅜˝• Blower wheel 10⅝˝ x 10⅝˝ • Size 16⅝˝ x 13⅛˝ x 17⅜˝• Inlets 8¾˝ • Shpg. 34 lbs.

ITEM 16-1391 $89.99SPECIFICATIONS• Model BLA120-110ACD1.00BB• Flow with 1 HP motor3000 CFM at 800 RPM at 1.0˝ H20• Flow with 1 HP motor3300 CFM at 960 RPM at 1.5˝ H20• Shaft 1˝ x 1½˝ w/keyway• Blower wheel 12⅝˝ x 11⅛˝ • Size 19⅜˝ x 1411/16˝ x 20⅜˝• Inlets 10⅜˝ • Actual weight 32 lbs.• Outlet 1411/16˝ x 137/16˝ • Shpg. 70 lbs. (oversize)

12 VDC DraftInduction

Blower

ITEM 16-1390$19.99

• New, draft induction blower. Ideal for useon corn or wood stoves, furnaces andother general purpose air movement.Metal housing and blower wheel.SPECIFICATIONS • Duty continuous• Voltage 12 DC • Mount 5 hole flange• Amperage 0.8 Amps • Inlet 5˝ diam.• Power 8 Watts • Outlet 19/16˝ x 111/16˝• Speed 2000 RPM • Size 9¾˝ x 7⅞˝ x 5⅛˝• Noise 74 dB • Shpg. 6 lbs.

200 CFM,12 VDCBlower

ITEM 16-1257$29.95• New WELLINGTON ELECTRIC Co. Model5012203. Squirrel cage blower. Plastic hous-ing with metal blower wheel. Housing isopen on intake side, requires addition of acover with inlet opening (not included).SPECIFICATIONS • Blower wheel• CFM 200 5½˝ diam. x 2¼˝• Voltage 12 DC • Outlet 3⅜˝ x 3˝• Amps 9 • Mnt. 6 bolt on open side• RPM 3500 • Size 9˝ x 6˝ x 8½˝• Duty continuous • Shpg. 8 lbs.

415 CFM,53 VDC

ITEM 16-1258$24.95• New FLOWMAX. Brushless DC blowerthat can be speed controlled for variableoutput flow. Black enamel finished steelhousing with galvanized blower wheel.Variable speed control with separate inputvoltage from 0 to 10 volts DC. Single wireoutput signal for use with tachometer forspeed indication. 24 volt DC minimum op-erating voltage.SPECIFICATIONS• CFM 415 • Dual inlet 4½˝ diam.• Voltage 53 DC • Discharge• Amps 4 amps 9˝ x 2⅝˝ with flange• Speed control voltage • Blower wheel0 - 10 volts DC 5¾˝ diam. x 7˝0 VDC = 50% max speed • RPM 2350 max.5 VDC = 75% max speed • Size 8¼˝ x 10⅜˝ x 8⅞˝10 VDC = 100% max speed • Shpg. 16 lbs.

12 VDC LiquidCoolingSystem

ITEM 16-1361 $39.95• New, SANYO DENKI SAN ACE MCModel 109-LC1-003 CPU-cooler. Liquidcooling system built for removing heatfrom high performance computer CPU’s.Consists of an aluminum, fan-cooled radi-ator, a small coolant pump and a coppercold plate. Mount the cold plate to a warmsurface to remove heat from the surface.Fan speed can be controlled based ontemperature.SPECIFICATIONS • Liquid coolant• Voltage 12 DC Propylene glycol solution• Amperage • Two bolt mountFan 0.30 Amps 183 mm (7.20˝) ctrs.Pump 0.13 Amps • Overall size 3⅛ ̋x 7 ̋x 7⅞˝

• Radiator area 6⅜˝ x 4⅝˝ • Cold-Plate 43 x 55 x 15 mm• Thermal resistance (1.69˝ x 2.17˝ x 0.59˝)0.22 K/W at max fan RPM • Shpg. 5 lbs.

20 CFM,24 VDCBlower

ITEM 1612-A $9.95• Used, military surplus centrifugal blower.SPECIFICATIONS• Flow 20 CFM max. • Mount adjustable bracket• Voltage 24 DC • Inlet 1˝ diam.• Power 1/100 HP • Outlet 1˝ x ⅞˝• Speed 8500 RPM • Size 4˝ x 3˝ x 3˝• Duty continuous • Shpg. 2 lbs.

23 CFM, 12 VDCBlowerPair

ITEM 16-1358$5.99• New JAPAN SERVO CO. ModelFBDC12H7P. Brushless design, ball bear-ings. Two blowers connected by one com-mon wiring plug. Blowers can be usedindividually by removing the plug.SPECIFICATIONS• Flow 23 CFM max. • Noise 55 dB• Static pressure • Duty continuous210 Pa (0.844˝ H2O) • Mount 2 bolt on 315/16˝ ctrs.

• Voltage 12 DC • Inlet 55 mm (2.16˝) dia.• Amperage 0.68 Amps • Outlet 1˝ x 21/16˝• Power 8.2 Watts • Size 3⅞˝ x 15/16˝ x 3¾˝• Speed 3350 RPM • Shpg. 1 lb.

140 DC Blowers www.surpluscenter.com8

12 VDC Jet AirBlower

ITEM 16-986 $12.99• New HUPP. High efficiency, oscillatinggrille, adjustable bracket for vertical or hor-izontal mounts. High impact plastic.Comes with cigarette lighter plug, powercord, mount ing hardware and instructions.SPECIFICATIONS• 12 VDC • Blower wheel• 1.2 amp 2½˝ x 4¾˝• Grill intake 4½˝ x 3˝ • Size 3½˝ diam. x 10˝• Discharge 1⅛˝ x 4½˝ • Shpg. 4 lbs.

454 CFM, 12 VDC3 Speed

CentrifugalBlower

ITEM 16-1406$39.99

• New, SPAL USA Model 007-A42-32Ddual inlet centrifugal blower. Ideal for mo-bile equipment cabs, automotive use andother general purpose HVAC applications.Resistor panel for three speed operation.SPECIFICATIONS • Mount 6 hole flange• Flow 454 CFM max. • Inlets 4¾˝• Voltage 12 DC • Outlet 5¾˝ x 2⅝˝• Amperage 17.5 • Size 6¾˝ x 615/16˝ x 7⅝˝• Duty continuous • Shpg. 7 lbs.70 CFM,

24 VDCBlowerITEM 16-1435$6.99• New, JAPAN SERVO Model E1540H24 -BYAZ-10. Plastic housing and squirrel cage.Ball bearing motor. Voltage range 16.8-27.6.Can be flush mounted on back side.SPECIFICATIONS• Flow 70 CFM max. • Duty continuous• Static pressure 1.7˝ H2O • Mount 2 holes thru body• Voltage 24 DC • Inlet 3.58˝ dia.• Amperage 1 Amp • Outlet 1.58˝ x 2.88˝• Speed 2700 RPM • Size 6˝ x 5⅞˝ x 19/16˝• Noise 56 db • Shpg. 1½ lbs.

3 Speed, 12 VDCDual

SquirrelCage

BlowerITEM 16-1381$59.99

• New takeoffs, dual squirrel cage blowerassembly. Built for tractor cabs. Resistorpanel for 3 speed motor operation. Heatercore has been removed. All plastic hous-ing. Four 2½˝ outlets from housing with ad-justable deflectors.SPECIFICATIONS• Voltage 12 VDC • Housing inlet• Power 10 Amps 10½˝ x 1¼˝• Blower wheels • Size 17˝ x 15˝ x 9¼˝4˝ dia. x 3½˝ each • Shpg. 12 lbs.

12 VDCBlowerMotorITEM 10-2242$15.99• New Red Dot Corp. Model RD-3106-1.Two speed motor. Includes steel squirrelcage. Ideal replacement in cars, trucks.SPECIFICATIONS• Voltage 12 VDC • Rotation CW• Amps 4.7 low speed, • Shaft 5/16˝ dia. x 1½˝ w/flat• Amps 8.5 high speed • Flange 7˝ dia. with 4 holes• Squirrel cage • Motor size 3˝ diam. x 4˝5¼˝ dia. x 3½˝ • Shpg. 6 lbs.

9 VDCMuffin FanITEM 16-1047

$5.99• New ROTRON. Supplied with housing todirect airflow through fan and turn 90°through 1½˝ x 4½˝ outlet. Ideal for movingair through cabinets with restricted access.Operates on 9 VDC, 0.6 amps. Approx. 90CFM airflow. 5 blades, 4¼˝ diam. Size 5˝ x3⅛˝ x 5˝. Shpg. 2 lbs.

102 CFM,12 VDCITEM 16-1380$4.99• New, COMAIR ROTRON Model MC12B7030598 muffin fan. Ball bearings. Optionalwire for 5 volt TTL tachometer output withtwo pulses per revolution.SPECIFICATIONS • Speed 3700 RPM• Flow 102 CFM max. • Mount 4 hole on 4⅛˝ ctrs.• Static pressure 0.357 in. H2O • Blade dia. 4⅜˝• Voltage 12 DC • Number of blades 5• Amperage .66 Amps • Size 4¾˝ x 4¾˝ x 1¼˝• Power 7.9 Watts • Shpg. 1 lb.

800-488-3407 DC Fans 141&

150 CFM,48 VDCITEM 16-1371$4.99• New, NIDEC TA500DC Model A34362.Very quiet 52.5 db. Ball bearings. Die casthousing with thermoplastic impeller. Oper-ating voltage range 24-56.SPECIFICATIONS • Dual mount• Flow 150 CFM max. 4.46˝ sq. and 4.13˝ sq.• Voltage 48 DC • Blade dia. 4¾˝• Amperage 0.28 Amps • Number of blades 5• Power 13.4 Watts • Size 5˝ x 5˝ x 1½˝• Speed 3450 RPM • Shpg. 1 lb.

282 CFM,24 VDCAxial FanITEM 16-1256$16.99• New, PAPST type 6424/2H axial fan. Ballbearings. Metal housing with plastic impeller.SPECIFICATIONS • Noise 63 dB• Flow 282.5 CFM max • Mount 4 thru-holes• Voltage (rated) 24 VDC, • Blade dia. 5⅝˝useable on 12-28 VDC • Number of blades 7

• Amperage 1.1 Amps • Size 6¾˝ x 5⅞˝ x 2˝• Power 26 Watts • Shpg. 3 lbs.

23 CFM,12 VDC

ITEM 16-1399$2.99• New, NMB Micro Boxer Model 2410NL-04W-B50 fan. Very quiet 35 db. Ball bear-ings. Thermoplastic housing and impeller.SPECIFICATIONS• Flow 23 CFM max. • Speed 4900 RPM• Static pressure • Mount 1.97˝ sq.0.25˝ H20 max. • Blade dia. 23/16˝• Voltage 12 DC • Number of blades 7• Amperage 0.27 Amps • Size 2.36˝ x 2.36˝ x 0.98˝• Power 3.24 Watts • Shpg. ¼ lb.

28 CFM,12 VDC

ITEM 16-1402$2.99• New, NMB Model 3110NL-04W-B20.Very quiet 25 db. Ball bearings. Thermo -plastic housing and impeller.SPECIFICATIONS• Flow 28 CFM max. • Mount 2.815˝ square• Voltage 12 DC • Blade dia. 3˝• Amperage 0.12 Amps • Number of blades 7• Power 1.44 watts • Size 3.15˝ x 3.15˝ x 0.98˝• Speed 2400 RPM • Shpg. ¼ lb.

30 CFM,12 VDC

ITEM 16-1400$2.99• New, NIDEC TA300DC Model A33315.Very quiet 33.6 db. Ball bearings. Thermo -plastic housing and impeller.SPECIFICATIONS• Flow 30 CFM max. • Mount 2.815˝ square• Voltage 12 DC • Blade dia. 3˝• Amperage 0.16 Amps • Number of blades 9• Power 1.92 Watts • Size 3.15˝ x 3.15˝ x 0.78˝• Speed 2800 RPM • Shpg. ¼ lb.

52 CFM,12 VDCITEM 16-1334$2.99• New AVC Model C9025S12H. Brushlessmotor. Sleeve bearings, plastic frame. Veryquiet 34 dba.SPECIFICATIONS• CFM 52 • Mtg. holes pattern 3¼˝ sq.• Voltage 12 DC • Seven blades• Amps 0.30 • Size 3⅝˝ x 3⅝˝ x 1˝• Blade diam. 3⅜˝ • Shpg. ½ lb.

100 CFM, 12 VDCFan Assembly

ITEM 16-1315 $11.95• New AVC. Brushless, four 12 VDC dualaxial fans with fan guard. Could be sepa-rated for individual use. 5 blades per sec-tion on each fan.SPECIFICATIONS • 1.4˝ H2O pressure• 100 CFM total • 4 hole flange mount(25 CFM/fan) on 1¼˝ centers/fan• 12 VDC • Five blades• Draws 4.56 amps • Size 40mm x 40mm(1.14 amps/fan) x 48mm (each fan)• Ball bearings • Overall size• 12,500 RPM 7½˝ x 2¾˝ x 19/16˝• 58 db/fan • Shpg. 1½ lbs.

94 CFM,12 VDCITEM 16-1312$5.95• New ADDA Model AD1212MB-F51.Brushless, 12 VDC fan. Aluminum frame,plastic blades, ball bearing.SPECIFICATIONS• CFM 94 • 5 blades• Voltage 12 DC • 41 db• Draws 0.35 amps • Size 4¾˝ x 4¾˝ x 1½˝• 4 hole flange mnt. 4⅛˝ ctrs. • Shpg. 1 lb.

20 CFM,12 VDC

ITEM 16-1131$5.99• New JMC PRODUCTS Model 0825-12LLB. Low current draw, ideal for solarapplications.SPECIFICATIONS • Mount 71.5mm x 71.5mm • Flow 20 CFM approx. • Blade dia. 2¾˝• Voltage 12 DC • Number of blades 7• Amperage 0.12 Amps • Size 80mm x 80mm x 25mm• Speed 2500 RPM • Shpg. ½ lb.

225 CFM,12 VDCAxial Fan

ITEM 16-1401$16.95• New, NMB Model 5920PL-04W-B39-D61 axial fan. Ball bearings. Metal housingwith plastic impeller.SPECIFICATIONS • Mnt. 4 thru-holes 6.38˝ B.C.• Airflow 225 CFM max • Blade dia. 5⅝˝• Voltage 12 VDC • Number of blades 5• Amperage 1.2 Amps • Size 6¾˝ x 5⅞˝ x 2˝• Noise 58 dB • Shpg. 3 lbs.

12 VDCCabFan

ITEM 16-1409$11.99• New, automotive fan. Ideal for use in ve-hicle cabs or recreational vehicles. Leverto select between oscillating or fixed posi-tion. Chrome wire guard. Plastic fanblades. Adjustable base mount.SPECIFICATIONS • Power cord• Voltage 12 VDC 3 ft. w/lighter plug• Amperage 0.65 Amps • Size 6˝ x 6¾˝ x 9½˝• Blades three 5½˝ dia. • Shpg. 3 lbs.

24 VDCCab Fan

ITEM 16-1438$39.99• New, FASCO Model 2899-006-050 twospeed cab fan. Metal mounting base withswivel ball to position air flow. Toggleswitch for low/off/high. Aluminum fanblades with plastic shroud.SPECIFICATIONS • Number of blades 4• Voltage 24 DC • Mount 2 or 3 holes 2⅛˝ BC• Amperage 0.8/1.1 Amps • Size 7¼˝ x 5˝ x 8¾˝• Blade dia. 6¼˝ • Shpg. 4 lbs.

AdjustableTimerSwitchITEM 137-B$1.90• Used HAYDEN. Operates on 208 volt AC.Consists of standard 5 watt, 4 RPM syn-chronous clock motor operating a SPDT 15amp microswitch. Complete timing cycleon longest setting is 13.5 seconds. A di-vide-by-tenths dial permits setting desiredtime. Size 3½˝ x 2½˝ x 2½˝. Shpg. 1½ lbs.

0-10 Minute,115 VACTimer

ITEM 1-1614$4.99• New. 115 VAC motor timer. Knob adjust-ment for 0-10 minute “ON” time. Contactsrated to switch 5 amps, 115 VAC. Timermotor draws 3 watts. Size 2⅝˝ x 2˝ x 2⅝˝.Shpg. 1 lb.

Electromechanical 60 min.,115 VACTimer

ITEM 11-3324$3.99

• New MALLORY, electromechanical timer.Originally made for use in battery chargers.Turning shaft starts timer. Knob not in-cluded.SPECIFICATIONS • Contact rating• Max. on time 60 minutes 15 amp 125/250 VAC• Motor voltage 115 VAC • Size 2˝ dia. x 1⅝˝• Mount ⅜-32 • Shpg. 1 lb.

24 VDC 6 DigitCounter

ITEM 11-2523$5.95

• New, DURANT 6-Y-41712. White numer-als on black background.SPECIFICATIONS• 999,999 readout • Size 19/16˝ x 1⅝˝ x 1˝• Non-resettable • Shpg. ½ lb.

8 ZoneSprinklerControllerITEM 11-1773$79.95• New. Great for farms, nurseries, golfcourses, parks, stadiums. Operates up to8 stations with either automatic or manualcontrol. All timing and set-up is done fromthe keyboard. Digital display.• Operates on 115 VAC, station outputs are24 VAC, 30 watts. Use 24 VAC relays on out-puts to control heavier loads. Steel weatherresistant housing with lock. Built-in circuitbreakers and surge/lightning protection.• 3 independent programs with up to 4starts per program. Zones can be set forany or all programs. Timing range from 1min. to 10 hrs. in 1 min. increments. 7 dayrepeat or 6 day skip cycles.• Separate master valve/pump start circuit.Self test program and system test - syringecycle. Battery back-up capability. Size 11˝x 5½˝ x 13˝. Shpg. 18 lbs.

142 Power Supplies www.surpluscenter.com8

12 VDC PowerSupply

ITEM 15-1193$7.95• New, unregulated power supply. Opencircuit board must be mounted in a protec-tive housing. Includes 6 ft. line cord withpanel mount rocker switch. Fuse is sol-dered onto circuit board.SPECIFICATIONS • Power 48 watts• Primary voltage 115 VAC • Terminals socket• Secondary voltage 12 VDC • Size 4⅞˝ x 2½˝ x 2¼˝• Secondary amperage 4 Amps • Shpg. 3 lbs.

800 ma, 12 VDC(A) ITEM 15-1085 $4.99• New, ELECTRO-MECH. 12 volt DCpower supply. Use to power taperecorders, cassette players, etc. Rated 12VDC, 800 ma output. 16 watts. Standard 2prong 115 VAC input. 72˝ cord with 6 mmplug. Size 2¾˝ x 2⅜˝ x 2˝. Shpg. 1½ lbs.

1 Amp, 12 VDC(B) ITEM 15-1180 $5.99• New, FELLOWES Model PS12-4-TI.Plug-in adapter. 2 prong plug. UL Listed.Class 2 power supply. 70˝ long cord. In-door use only. Input 115 VAC, output 12VDC, 1 amp, 60 Hz, 20 watts. Size 2˝ x 2⅛˝x 3⅜˝. Shpg. 1½ lbs.

600 ma, 12 VDC(C) ITEM 11-1796 $9.99• New. Use to charge 12 V batteries intoys, portable equipment, etc. Rated 12VDC, 600 MA output. Simple plug-in de-sign. 5.5 mm plug on end of 70˝ cord. Size2˝ x 1¾˝ x 2¼˝. Shpg. 1 lb.

115 VAC : 12 VDC(D) ITEM 15-1179 $8.49• New. FP Model D57-12-1700. Plug-inadapter. 2 prong plug. UL Listed. Class 2transformer. 64˝ long cord. Input 115 VAC,output 12 VDC, 60 Hz, 26.5 watts, 1700 milli-amps. Size 23/16˝ x 2½˝ x 3⅝˝. Shpg. 3 lbs.

120/12 VAC(E) ITEM 15-1135 $6.95• New, BOSTON ACOUSTICS® Class II. 7½˝ft. input cord 120 volt AC, 6 ft. output cordwith 5.5 mm plug 12 volt AC. Output 1½amp. Size 2¼˝ x 1⅞˝ x 3½˝. Shpg. 3 lbs.

850 ma, 12 Volt DC(F) ITEM 15-1178 $3.49• New. Transformer plugs into standard120 volt AC outlet and delivers 12 volt DCpower at 850 milliamps. 68˝ output cordwith cigarette lighter plug end. Size 2½˝ x2¼˝ x 3½˝. Shpg. 1½ lbs.

2 Digit NumericDisplay

ITEM 11-3223 $11.95• New 2 digit numeric display with powersupply and pushbutton switch. Display ad-vances one count each time button ispushed. Other types of actuators such asmicroswitches could also be used. Non-re-settable (must cycle thru full range to returnto zero). Power supply plugs into 115 VACoutlet and delivers 7.5 VDC to circuit.SPECIFICATIONS• Display range 0-99 • Size 5˝ x 4⅛˝• Digit size 1⅝˝ x 2¾˝ (display panel)• LED’s per digit 21 • Shpg. 2 lbs.

7 Digit115 VACCounter

ITEM 21-1281 $4.79• SODECO. Reads to 9,999,999. Non-reset. Operates on 115 VAC. Draws 3½watts. Panel mount in 1½˝ x 1˝ cutout.White numerals on black face. Overall size1⅝˝ x 2⅜˝ x 1⅛˝. Shpg. ½ lb.

12 VDC 6 DigitCounter

ITEM 21-1551$4.99• New, KESSLER-ELLIS Model KE610 -AFB. Non-resettable.SPECIFICATIONS• 12 VDC • Four bolt rear mount• 6 digit 1⅛˝ x 127/32˝ centers• 10 cycles per second • Shpg. ½ lb.

CountdownTimerITEM 29-N-013$2.99• New, M.H. RHODES spring woundcountdown timers. Save energy by auto-matically turning lights or equipment off.Knob not included.SPECIFICATIONS • Screw terminals• 5 minute timer • Action spring wound• Contacts SPST • Shaft 3/16˝ diam. w/flats• Contact ratings • Face size 25/16˝ diam.25 Amps at 120-240 VAC • Mtg. ⅜˝-24 x ⅜˝⅓ HP max. threaded neck240 VAC max. • Mounting depth 15/16˝• Switch type rotary • Shpg. 1½ lbs.

Plug In Power Supplies

A B C

D E F

125 Volt ⅓Watt IndicatorLight

ITEM 11-3205 $1.29• New, red indicator light with wire leads.Plastic housing 1¼˝ long w/ ½˝ dia. head.SPECIFICATIONS• Voltage 125 AC • Mounting hole ⅜˝ dia.• Power ⅓ watt • Shpg. 1⁄10 lb. 4 Pole

Relays

• New, TAIAN Model RAN-4 magnetic con-trol relays.SPECIFICATIONS• Contact ratings3 amps at 110 VAC, 3 amps at 220 VAC• NEMA size 0 • Screw terminals• Four bolt base mount • Size 2¾˝ x 3¾˝ x 3⅛˝on 2˝ x 1⅜˝ centers • Shpg. 1½ lbs.

Coil 220 VAC, Resistance 440 Ohms

ITEM 11-2983-A $7.95• 3 sets of N.C. contacts, 1 set of N.O. contacts.

ITEM 11-2983-E $7.95• 2 sets of N.O. contacts, 2 sets of N.C. contacts.

2 K Ohm/VoltAnalogMulti-tester

ITEM 21-1590$6.95• SPECO MT-2. Multi-tester with 5 func-tions and 16 ranges. Analog scale. Fuseand diode protected. Instructions in-cluded.SPECIFICATIONS • DC Current• AC Volts 0-500µA/50mA/250mA0-10/50/250/500 • Resistance• DC Volts 0-1M (5K mid scale)0-10/50/250/500 • Size 1˝ x 2¼˝ x 3½˝• Insulated test leads • Shpg. 2 lbs.

800-488-3407 AC Relays & Contactors 143&

5 HPMagneticStarter

ITEM 11-1713 $118.95• Brand new SIEMENS. NEMA 1 enclo-sure. Rated at 5 HP, 230 VAC. Two polecontactor. Thermal overload coil is ratedbetween 23.8 and 25.4 amps. Manualreset button on cover. 230 volt coil. Size11˝ x 6½˝ x 5½˝. Shpg. 6 lbs.

120 VAC3PDT Relay

ITEM 11-3152$6.49• New, DELTROL CONTROLS 375P Series,Model 21040-84 power relay. Clear polycar-bonate cover. Terminals designed formounting in a printed circuit board: ¼˝ widecontact terminals with 0.09˝ wide ends. Coilterminals are 0.187˝ wide with 0.055˝ wideends. Terminals can be fitted with standardspade connectors. UL and CSA listed.SPECIFICATIONS • Contact ratings• Coil voltage 120 VAC 30/15 amps at 300/600 VAC• Coil resistance 970 Ohms 30 amps at 28 VDC• 3PDT contact configuration 1 HP/2 HP at 120/240 VAC• Printed circuit terminals • Size 2⅛˝ x 1⅜˝ x 2⅜˝• Duty cont. • Shpg. ¼ lb.

120 VAC 3PDTRelayITEM 11-1503B$4.95• New, MIDTEX Model 157-23T1L1 en -closed relay. Clear green plastic housing.Threaded stud on back for easy mounting.SPECIFICATIONS• Coil voltage 120 VAC • Contact rating• Coil resistance 1700 ohms 5 amps, ⅛ HP at 120 VAC• Contacts 3PDT 5 amps, ¼ HP at 240 VAC• 3/16˝ spade terminals 2 amps at 600 VAC• Cont. duty • Size 2˝ x 1½˝ x 1⅜˝• Threaded stud mount • Shpg. ½ lb.

Solid State TimeDelay RelayITEM 11-1914$3.95• New, SSAC Model TS1120A-540 timedelay relay. Delay on make, N.C. contactsopen approx. 10-18 seconds after activa-tion voltage is applied.SPECIFICATIONS• 24 VAC activation voltage • SPST N.C. contacts• 110 VAC load • 10-18 sec. delay• Max. load 1.2 amps • Shpg. ¼ lb.

120 VAC Reversing Relayw/OverloadProtectors

• New ABB Model VB6-30-10. Dual coilrelay assembly with jumpers to reverseelectric motors. 3 sets of N.O. contacts, 2sets of N.O. auxiliary contacts. Thermaloverload (model T7DU) disconnects motorif current exceeds setting. 1 N.O. and 1N.C. contact on overload.SPECIFICATIONS• Coil voltage 120 VAC • Contact ratings: • Screw terminals20 amps at 220/440 VAC • 3 hole base mount2.2 KW at 220 VAC 3 ph • Size 3¾˝ x 4˝ x 1⅞˝

• Trips at 125% of setting • Shpg. 1½ lbs.

ITEM 11-3241 $16.95• Thermal overload adj. 1.0 to 1.6 amps.

ITEM 11-3178 $16.95• Thermal overload adj. 1.6 to 2.4 amps.

45-65 Amp 3 Ph.ThermalOverloadRelayITEM 11-3003$9.95• New, TAIAN RH-50M thermal overloadrelay for use with contactors (not included).Can be set for auto-reset or manual reset.Screw terminals, plastic housing.SPECIFICATIONS• Adj. range 45-65 amps • N.C. aux. contact ratings• Rated to 600 VAC, 3 Ph. 6 amps at 110 VAC• Size 2½˝ x 3˝ x 3⅞˝ 3 amps at 220 VAC• Shpg. ½ lbs. 1.5 amps at 550 VAC

RotarySwitches

• New, rotary switches.

Three PositionITEM 11-3227 $2.99SPECIFICATIONS • Rotates only 180°• Contact ratings: • Switch type rotary25 Amps at 120-240 VAC • Spade terminals1 HP at 120 VAC HP max. • Action maintained2 HP at 240 VAC HP max. • Switch positions three240 VAC max. • Face size 2˝ x 1⅝˝• Connections • Mtg. two tapped #6-32Position 1 Off holes on ¾˝ centersPosition 2 L1 to 1 & 2 • Mounting depth ⅞˝Position 3 L1 to 1 & 5 • Shpg. ¼ lb.Two PositionITEM 11-3226 $2.79SPECIFICATIONS• Contacts SPDT • Spade terminals• Contact ratings • Action maintained1.5 Amps at 120-240 VAC • Switch positions two240 VAC max. • Face size 11/16˝ x 11/16˝• Connections • Mounting two #8-32Position 1 L to OR tapped holes on ¾˝Position 2 L to BK • Mounting depth 9/16˝• Switch type rotary • Shpg. ¼ lb.

125 Volt IndicatorLightITEM 12-964$1.50• New. 125 volt indicator light. Mounts in a½˝ diam. opening, tabs hold it in place.Red lens. Spade terminals.SPECIFICATIONS• 125 volt AC/DC • Overall lgth. 1½˝• ⅓ watt • Shpg. 1⁄10 lb.

12 Volt IndicatorPanelLights

99¢ each• New, CALTERM indicator panel lights.Plastic housing. Mounts in a ½˝ diameteropening, tabs hold housing in place. Re-movable black bezel.SPECIFICATIONS• Voltage 12 DC • Mounting depth 17/16˝ dia.• Termination ¼˝ spade • Bezel diameter ¾˝ dia.• Mounting hole ½˝ dia. • Shpg. 1⁄10 lb.

ITEM 11-3289-A Amber illuminationITEM 11-3289-B Blue illuminationITEM 11-3289-G Green illumination

12 VDC RelayBox w/Fuse

ITEM 11-3231$9.99• New 12 volt DC relay with15 amp fuse in watertightplastic enclosure. Grote In-dustries part #01-4400-72.SPECIFICATIONS• Coil Voltage 12 DC • Power cable 36˝ 4 conductor• Contacts single pole N.O. 10 gauge stranded w/sheath• Relay current rating • Mtg. 2 tabs w/ ¼˝ holes40 amp make/30 amp break • Size 3˝ x 2¼˝ x 6˝• Fuse 15 amp • Shpg. 2 lbs.

24 VDC,3PDT

ITEM 11-1195$3.85

• Used. Coil 55 ohms. 10 amp at 125 VAC,5 amp at 240 VAC. Clear plastic dust proofcase w/slotted flange mount. Tiny lampacross the coil lights up when relay ener-gizes. Removable diode shunt across relaycoil. Size 1⅞˝ x 1½˝ x 1½˝. Shpg. ¼ lb.

12 VDC 160 AmpReversingContactor

ITEM 11-3214$44.95• New, high current, reversing contactorideal for use with reversible direct currentmotors. Sealed plastic housing.SPECIFICATIONS• Coil ratings • Contact rating12 VDC, 8 Ohms 160 Amps at 12 VDC• Duty 5 min. max. • Mount 4 bolts onat 160 Amps output 1¼˝ x 315/16˝ ctrs.20% max. duty cycle • Size 4½˝ x 2˝ x 2⅝˝• Stud terminals M6-1.0 • Shpg. 2 lbs.

12 VDCContactor

ITEM 11-1722$13.49• New, GOULD. 3 pole, 12 VDC contactor.Two poles are normally open, third pole is dou-ble throw. 13 ohm coil. Heavy duty 20 ampcontacts. Size 2˝ x 2½˝ x 3½˝. Shpg. 2 lbs.

12 VDC MotorReversingContactorITEM 11-3149$45.95• Brand new TROMBETTA Model 214-1231-A11 reversing polarity contactor.Ideal for controlling permanent magnetmotors. Dynamic braking in de-energizedstate. Sealed plastic housing.SPECIFICATIONS• 12 VDC coil • 20% max duty cycle• Contact ratings • Coil terminals ¼ spade12 VDC nominal, 15 VDC max • Motor & battery75 amps for 5 min. max terminals 5/16˝-24 studs125 amps for 30 sec. • 2 bolt mount on 4⅛˝ ctrs.150 amps in-rush • Size 5˝ x 3⅜˝ x 3˝

• 5 min. max ON time • Shpg. 1 lb.

ITEM 11-3149-COVER $6.10• Plastic cover for ITEM 11-3149 above. 2hole mount. Shpg. 1⁄10 lb.

144 DC Relays & Contactors www.surpluscenter.com8

12 VDCHornRelayITEM 11-2276$2.99• New. Automotive type single pole nor-mally open 12 volt DC relay. Rated toswitch 11 amps. 90 ohm coil. Groundedframe with plastic dust/moisture cover.Use for horns, lights, etc. Screw terminals.Size 2⅛˝ x 1⅛˝ x 1¾˝. Shpg. ½ lb.

12 VDC, N.O.Relay

ITEM 11-1525$1.95• New. General purpose relays. Openframe.Coil rated 12 VDC, coil resistance120 ohms. Shpg. ½ lb.

12 VDC StarterRelay

ITEM 11-1108$6.95

• Brand new. 12 VDC starter solenoid. Op-erating coil connects to hot side batteryterminal. Grounded through case. Coil 6ohm. Size 2¼˝ x 2⅛˝ x 2⅛˝. Shpg. 1 lb.

12 VDC,DPDT

ITEM 11-2420$4.95• New, DELTROL CONTROLS 275P202C -12DS155D.SPECIFICATIONS • Contact ratings• Coil voltage 12 DC 25 amps at 277 VAC• Coil resistance 80 ohms 25 amps at 28 VDC• Contacts DPDT 1 HP/ 2 HP at 120/240 VAC• Size 1½˝ x 1⅜˝ x 27/16˝ • Terminals 0.187 spade coil• Shpg. ½ lb. ¼˝ spade contact

12 VDC SPDTRelay

ITEM 11-3076$2.39• New. 12 volt DC 43 ohm coil. Normallyopen 5 amp contacts. Grounds thrumounting bracket. Push on terminals. Size1½˝ x 1⅛˝ x ⅞˝. Shpg. ¼ lb.

12 VDC MotorReversingContactor

ITEM 11-3169-12$42.95• Brand new, SPAL reversing polarity con-tactor. Ideal for controlling permanentmagnet motors. Both output terminals restat ground for dynamic braking in de-ener-gized state. Splash resistant body with O-ring seals. Silver-plated contacts.SPECIFICATIONS• Coil ratings • 20% max duty cycle12 VDC nominal, • Coil terminals ¼˝ spade15 VDC max. 7 ohms • Motor & battery terminals

• Contact ratings 6mm studs5-30 VDC • Two hole mount 2¾˝ ctrs.100 amps max duty cycle • Size 2⅛˝ x 33/16˝ x 3¼˝

• 6 min. at max. cont. output • Shpg. 1 lb.

ITEM 11-3169-24 $42.95• Same as ITEM 11-3169-12 above exceptcoil ratings: 24 VDC nominal, 30 VDC max.26.8 ohms.

12 VDC SPDTRelay

w/Base

ITEM 11-3222$3.95

• Brand new. Ideal for auxiliary lights, mo-tors. Includes base socket with 11˝ leads.SPECIFICATIONS • Amp rating• Coil voltage 12 volt DC 30 break, 40 make• Contacts SPDT • Size 1˝ x 1˝ x 1¾˝• Mounting single hole • Shpg. ½ lb.

12 VDC,DPDTRelayITEM 11-3325$4.99• New AROMAT Model HG2-DC12 relay.Fits standard 8 spade relay socket (not in-cluded).SPECIFICATIONS• Coil voltage 12 DC • Contact ratings:• Contacts DPDT 20 amps at 250 VAC• 100 ohms coil resistance ¾ HP 1 Ph. 125 VAC• Terminals ¼˝ spade 2 HP 1 Ph. 250 VAC• Size 1½˝ x 1⅜˝ x 2¼˝ • Shpg ½ lb.

12 VDC MotorReversingContactor

ITEM 11-3331$29.99• New, reversing polarity contactor. Idealfor controlling permanent magnet motors.Both output terminals rest at ground fordynamic braking in de-energized state.SPECIFICATIONS • Coil terminals ¼˝ spade• Coil voltage 12 VDC • Motor & battery terminals• Contact ratings 150 amps 6mm studs• Shift time on/off 50 msec. • Mnt. 2 holes on 2¾˝ ctrs.• Duty 6 min. at max output • Size 2⅝˝ x 1¾˝ x 2⅝˝• Max duty cycle 20% • Shpg. 1 lb.

24 VDC,SPDT

ITEM 11-2524$3.95• New, FUJITSU SPDT Model FRL-251.Rated for continuous duty operation. Plas-tic dust cover.SPECIFICATIONS • Contact rating• Coil voltage 24 VDC ⅓ HP at 120 VAC• Coil resistance 470 ohms ½ HP at 240 VAC• Contacts SPDT 10 amp at 30 VDC• Quick connect • Size 1⅜˝ x 1½˝ x 2⅛˝spade type terminals • Shpg. ½ lbs.

800-488-3407 DC Relays & Contactors 145&

12 VDC Int. DutySolenoids

• Brand new, BUYERS PRODUCTS sole-noid. Plastic housing.SPECIFICATIONS • Coil resistance 3.2 Ohms• Voltage 12 DC • Main terminals 5/16˝-24• Current rating • Center terminal 10-32100 Amps at 12 VDC • Size 2½˝ x 3½˝ x 3˝• Duty intermittent • Shpg. 1½ lbs.

ITEM 11-3292 $7.10• Part #1306300. Insulated, apply groundto center terminal to activate. Ideal re-placement for use on snowplows, replacesWestern® #25634.

ITEM 11-3300 $7.65• Part #1306070. Case grounded, applypositive 12 VDC to center terminal to acti-vate. Ideal replacement for use on snow-plows, replaces Western® #15370.


6 VDC N.O.RelayITEM 11-1524$1.35• New. Artisan Electronics. General pur-pose open frame relay.SPECIFICATIONS• 6 VDC coil • Contacts rated 3 amps• Coil resistance 29 ohms • Solder terminals• SPNO contact • Shpg. ½ lb.

36 VDC,3PDTITEM 11-2382$4.99• Used WESTCODE. 36 volt DC relay withbase. Like new condition.SPECIFICATIONS• Contacts 3PDT • Ohms 1050• 10 amp capacity • Size 3˝ x 2˝ x 3˝• Coil 36 volt DC • Shpg. 1 lb.

36 VDC SPDTDelayRelayITEM 11-2390$5.99• New, WESTCODE. SPDT relay has ad-justable delay on operation of 0.2-2 sec-onds. Contacts are rated to ⅙ HP, 120 voltAC and 10 amps. 35 volt DC coil. Clearplastic housing with 8 pin base for use with8 pin socket base (not included). Size 1⅛˝x 1⅛˝ x 3⅞˝. Shpg. ½ lb.

36 VDC,4PDT

ITEM 11-2384$7.99• New take-offs WESTCODE. 36 volt DCrelay with base.SPECIFICATIONS• Contacts 4PDT • Ohms 295• 25 amp capacity • Size 3˝ x 2˝ x 3˝• Coil 36 volt DC • Shpg. 2 lbs.

12 VDC Cont. DutyInsulatedSolenoid

ITEM 11-3290$18.95• Brand new, TROMBETTA Part #1306317solenoid. Environ men tally sealed plastichousing for demanding environmentalconditions. Copper contacts. ReplacesWestern® part number 56131K-1.SPECIFICATIONS • Duty continuous• Voltage 12 DC • Coil resistance 13.5 ohms• Current ratings • Main terminals 5/16˝-24150 Amps cont. carry • Center terminal 10-32250 Amps break • Size 4˝ x 2½˝ x 2⅝˝800 Amps in-rush • Shpg. 2 lbs.

12 VDC Cont. DutySolenoids

• Brand new, BUYERS PRODUCTS sole-noid. Plated steel housing.SPECIFICATIONS• Voltage 12 DC • Coil resistance 16.3 Ohms• Current ratings: • Main terminals 5/16˝-2480 Amps cont., • Center terminal 10-32150 Amps in-rush • Size 2¾˝ x 3½˝ x 2⅝˝• Duty continuous • Shpg. 2 lbs.

ITEM 11-3277 $11.95• #1306510. Case grounded, apply posi-tive 12 VDC to center terminal to activate.

ITEM 11-3278 $11.95• #1306505. Insulated housing, applyground to center terminal to activate.

24 VDC 4 PoleRelayITEM 11-2378$6.99• New, OMRON. 4 normally open contactsrated at 20 amps, 120 volt AC. Coil 24 volt,260 ohm. Manual over-ride to close con-tacts in case of power failure. Push-on ter-minals. Size 2¼˝ x 1⅜˝ x 2˝. Shpg. 1 lb.

24 VDC,DPSTRelayITEM 11-3283$3.99• Used, POTTER & BRUMFIELD ModelPRD-7DY1-24. Open frame relay. ¼˝ push-on terminals.SPECIFICATIONS• Contacts 2 pole, • Amp rating 25 amps 250 VACnormally open • Coil voltage 24 DC

• HP Rating • Coil resistance 288 ohms1 HP at 120 VAC • Size 2½˝ x 2½˝ x 2¼˝2 HP at 240 VAC • Shpg. ½ lb.

12 VDCMulti-PurposeRelays• New. Spring return to open position. Use asa lock-up relay for alarm systems, signalers,etc. Contacts rated 5 amp. Shpg. ¼ lb.

ITEM 11-1291 $1.69• DPST, coil 85 ohm. Size 1¾˝ x 1½˝ x ¾˝.

ITEM 11-1290 $1.89• SPST, coil 80 ohm. Size 1½˝ x 1˝ x ¾˝.

Westinghouse Circuit Breakers• New, Westinghouse Quicklag, plug-in,single pole circuit breakers.SPECIFICATIONS FOR ALL• Thermal magnetic • Suitable for 60° C wire• Plug on clip line terminal • Size 29/16˝ x 1˝ x 215/16˝• Box lug load terminal • Shpg. ½ lbs.

ITEM Model VAC Amps Interrupting Rating Price 11-2909 HQP1030 120/240 30 10,000 amp at 120/240 VAC 99¢

11-3000 HQP1040 120/240 40 10,000 amp at 120/240 VAC 99¢

11-2907 QPHW1030 120/240 30 22,000 amp at 120/240 VAC 99¢

11-2911 QPHW1030 120/240 30 22,000 amp at 120/240 VAC 99¢

11-2998 QPHW1040 120/240 40 22,000 amp at 120/240 VAC 99¢

11-2912 QPHW1050 240 50 22,000 amp at 240 VAC 99¢

11-2999 QPHW1060 120/240 60 22,000 amp at 120/240 VAC 99¢

11-2906 QPHW1060 120/240 60 10,000 amp at 120/240 VAC 99¢

New Low Price!

99¢ Each

WeightNot To Zone Zone Zone Zone Zone Zone ZoneExceed 2 3 4 5 6 7 8

2 lbs. $ 5.30 $ 5.65 $ 6.30 $ 8.05 $ 8.75 $ 9.45 $ 10.404 lbs. 6.85 8.15 9.20 12.85 14.05 15.00 16.706 lbs. 8.95 10.30 11.85 16.20 18.00 19.35 21.758 lbs. 10.20 12.20 14.25 19.60 21.85 24.00 27.4010 lbs. 11.60 14.15 16.85 23.00 25.70 28.60 33.2012 lbs. 13.25 16.20 19.45 26.60 30.00 34.10 39.1514 lbs. 14.90 18.25 21.80 29.90 33.95 37.50 42.5516 lbs. 16.00 20.30 24.25 33.40 37.45 40.45 46.2018 lbs. 16.95 22.05 26.80 36.85 41.40 44.65 51.1020 lbs. 18.15 22.80 27.80 38.50 44.40 48.50 55.9522 lbs. 19.20 23.65 28.70 40.00 46.10 50.45 58.6524 lbs. 20.10 24.60 30.45 41.55 47.90 52.50 61.1526 lbs. 20.95 25.25 32.40 43.10 49.75 54.45 64.1528 lbs. 22.25 26.00 34.30 45.05 51.15 56.00 69.0530 lbs. 23.60 26.60 36.05 46.35 53.45 57.65 72.4532 lbs. 24.55 27.45 37.25 47.50 54.95 60.80 75.4034 lbs. 25.15 28.95 39.15 49.15 57.30 64.00 78.2536 lbs. 25.75 30.50 40.20 51.30 60.35 66.80 80.9538 lbs. 26.25 31.85 41.30 53.25 63.65 69.85 83.6040 lbs. 26.85 33.20 42.35 55.50 66.20 73.30 86.0542 lbs. 27.30 34.50 43.30 57.20 68.50 75.85 88.4544 lbs. 27.80 35.60 44.25 59.70 71.30 77.70 90.6546 lbs. 28.20 36.30 45.05 62.20 72.85 79.40 92.8548 lbs. 28.65 36.90 45.85 64.85 74.55 81.10 94.9050 lbs. 29.00 37.40 46.55 67.35 76.60 82.95 96.8552 lbs. 29.50 37.95 47.30 69.00 78.45 85.45 98.9054 lbs. 30.40 38.40 47.95 70.10 79.70 88.10 101.6056 lbs. 31.35 38.85 48.50 71.10 80.85 90.75 103.9058 lbs. 32.30 39.20 49.10 72.00 81.90 93.35 105.4560 lbs. 33.20 39.60 49.80 72.80 82.85 94.50 107.0062 lbs. 34.10 39.85 51.35 73.50 83.70 95.50 110.2064 lbs. 35.10 40.15 52.95 74.20 84.50 96.40 113.6566 lbs. 36.00 40.40 54.50 74.80 85.20 97.15 117.1068 lbs. 37.00 40.60 56.15 75.25 86.55 97.90 119.9070 lbs. 37.90 40.75 57.75 75.70 88.65 98.60 122.50

146 Order Information www.surpluscenter.com8

USPS Priority Mail Rates

What Is The Surplus Center?• Our surplus products are usually a one time purchase at prices well belownormal. In addition to our surplus items, we also stock products from majormanufacturers. All of our products fit into these classifications:

• Brand new. New products we buy directly from the manufacturer andkeep in stock.• New. Excess inventory that is new and unused. Quantities of surplusitems are limited; once we sell out we cannot order more.• New take-offs. Removed from UNUSED machinery.• Used. Used products in good working condition.

Order Online• Please visit our website www.surpluscenter.com.Many more items than inthis catalog! Also a great source of additional information, current stock counts,and pictures. Updated daily with new items.

Order By Phone• Call our toll free number 1-800-488-3407 for fast service 24 hours a day, 7days a week from all 50 states plus Canada, Puerto Rico and the Virgin Islands.

Order By Mail• Fill out order blank completely. Check Processing: When you provide a checkas payment, you authorize us to use information from your check to make a one-time electronic fund transfer from your account. Funds may be withdrawn fromyour account as soon as the same day we receive your payment You will not re-ceive your check back, it will be destroyed by us in a secure manner.• Send money order, bank draft, check, or include your Visa, Mastercard, Dis-cover or American Express number and expiration date. For your protection,PLEASE DON’T SEND CURRENCY.• Handling charge $2.00 per order.

Shipping & Delivery• Please allow 7 - 10 working days for delivery. If an item is out of stock wewill inform you of the expected delay.• All items, unless otherwise noted, are priced F.O.B. Lincoln. You are re-sponsible for shipping costs.• We normally ship by:

• UPS. Items 150 lbs. and under can be sent using ground, 3rd Day, 2ndDay or Next Day service. 3rd Day, 2nd Day and Next Day are guaranteedservices. Rates are listed on the next page.• Priority Mail. Items 70 lbs. and under will be delivered in 2-3 days tomost U.S. addresses. Rates are on this page.• Truck Freight. We use Fedex Freight Co. to ship items that weigh morethan 150 lbs. or are too large to ship using UPS. A residential delivery feewill apply to shipments made to residential or rural areas.• C.O.D. Orders. UPS and USPS Priority Mail only. $11.00 per box.• International Orders. Ship using BAX Global, USPS Air Mail Parcel Postor USPS Global Express Mail.

Returning Merchandise• If you receive a product from us and are not satisfied or the item is not suit-able for your application, you can return it within 30 Days, as long as the itemhas not been installed or modified and it is in the original manufacturers con-dition. A refund will be issued for the cost of the item only. All returns mustbe shipped back PREPAID with all original parts, manuals and accessories.We do not accept COD shipments.• If a product is defective within the warranty period please contact us im-mediately so we may assist you.• All returns should have a Return Authorization number written on the box.To obtain an authorization and shipping instructions call 1-800-488-3407 oremail [email protected]• Pack the products securely and ship to this address: Surplus Center Returns Dept. 1015 West ‘‘O’’ Street Lincoln, NE 68528

Limited Warranty• Products we regularly stock that are purchased directly from the manufacturer are covered bythat manufacturers warranty.• We warrant all other products, only to the original purchaser, to be free from defects in mate-rials and workmanship for a period of 90 days from date of shipment.• Because we have no assurance of the purposes for which any of the items herein will or maybe used, no warranty is given as to the fitness of the item for any particular purpose. You havethe responsibility for determining the suitability of items herein for your particular use. We shallnot be liable for incidental or consequential damages. NOTE! Warranties do not cover bent hy-draulic cylinder shafts.• We shall, at our option, repair or replace any items deemed by us to be defective under thiswarranty. Items returned by the purchaser for warranty adjustment must be handled as stated inour return policy. Proof of, and date of purchase will be required. Remedies under this warrantyshall be limited to the original purchase price of the claimed defective item. (Some states do notallow limitations on implied warranties, incidental or consequential damages, thus, some of thelimitations or exclusions referred to above may not apply to you.)• In no event shall we be liable for any damages, or warrant any of our products which are madedefective as a result of damage in shipment, user’s abuse, neglect or improper operation.• A copy of the warranty, if any, for an item in this catalog may be obtained, at no charge, uponwritten request addressed to: SURPLUS CENTER Warranty Department PO Box 82209 Lincoln, NE 68501-2209

Zone ChartFOR DETERMINING ZONES FROM LINCOLN, NEBRASKATo determine the shipping zone for a particular destination, use the first three digits ofthe ZIP CODE to which the parcel is addressed. Refer to the rate chart for shipping costs.

ZIP CODEPREFIXES ZONE004-005......6010-043......6044 .............7045 .............6046-047......7048-089......6

100-139......6140-147......5148-149......6150-169......5170-199......6

200-214......6215 .............5216-225......6226 .............5227 .............6228-229......5230-239......6240-274......5275-279......6280-282......5283-285......6286-293......5294-295......6296-298......5299 .............6

300-312......5313-315......6316-319......5320-322......6323-325......5326-339......6341-349......6350-374......5375 .............4

ZIP CODEPREFIXES ZONE376-379......5380-384......4385 .............5386-387......4388 .............5389 .............4390-399......5

400-402......4403-418......5420 .............4421-422......5423-424......4425-459......5460-469......4470 .............5471-479......4480-489......5490-491......4492 .............5493-495......4496-497......5498-499......4

500-507......3508 .............2509 .............3510-511......2512-513......3514-516......2520 .............4521-527......3528-559......4560-562......3563-567......4570-575......3576-587......4588-592......5

ZIP CODEPREFIXES ZONE593 .............4594-599......5

600-611......4612 .............3613-622......4623 .............3624-633......4634-635......3636-639......4640-645......2646-648......3649 .............2650-653......3654-655......4656-658......3660-666......2667-668......3669 .............2670-673......3674 .............2675-678......3679 .............4680-689......2690-692......3693 .............4

700-709......5710-712......4713-714......5716-732......4733 .............5734-736......4737 .............3738-739......4740-743......3744-745......4746 .............3

ZIP CODEPREFIXES ZONE747-757......4758-759......5760-764......4765-789......5790-796......4797-799......5

800-812......4813 .............5814 .............4815 .............5816-820......4821 .............5822-828......4829-834......5835-838......6840-853......5854 .............6855-863......5864 .............6865-874......5875-877......4878-880......5881 .............4882-883......5884 .............4885 .............5889-892......6893 .............5894-897......6898 .............5

900-954......6955 .............7956-961......6970-994......6995-999 ......** Call for Alaska rates.

800-488-3407 UPS Rates 147&

2012

UPS Rates

Ground Service

3rd Day

Selec

t 2

nd Day

Air Nex

t Day

Air

Zone

s

Zon

es

Zon

es

Zo

nes

W

eigh

t

2

3

4

5

6

7

2

3

4

5

6

7

2

3

4

5

6

7

2

3

4

5

6

7

2 lb

s.8.39

8.77

9.29

9.43

9.81

9.96

10.25

11.35

12.20

13.80

17.25

18.40

14.85

15.15

15.65

17.90

22.45

24.20

24.95

34.15

44.95

48.75

53.75

55.85

4 lb

s.8.62

9.23

9.99

10.33

10.62

10.97

11.45

12.75

13.90

16.40

20.95

22.75

15.20

15.95

17.40

22.10

28.85

31.05

29.65

38.15

53.35

58.50

64.40

66.30

6 lb

s.8.97

9.52

10.42

10.83

11.07

11.59

12.65

14.40

16.00

19.05

24.30

27.20

16.10

16.90

20.10

26.15

35.10

37.70

32.85

41.45

62.65

68.45

73.65

76.35

8 lb

s.9.55

9.91

10.78

11.20

11.59

12.23

13.45

16.25

18.10

21.30

28.10

30.90

17.25

19.65

22.85

30.55

42.85

45.35

34.50

45.65

70.85

77.80

85.45

87.55

10 lb

s.9.92

10.13

11.06

11.63

12.16

13.44

14.80

17.85

19.85

23.90

31.25

34.85

18.65

21.45

26.05

34.60

49.30

53.50

34.95

47.00

76.45

85.05

88.80

93.15

12 lb

s.10

.38

10.67

11.32

11.93

12.94

14.82

16.10

19.50

21.80

25.95

35.05

38.50

20.25

23.55

28.45

38.70

56.85

61.05

39.70

53.50

86.25

95.40

105.65

109.50

14 lb

s.10

.75

11.12

11.59

12.37

14.02

16.24

17.30

21.20

23.85

28.45

38.55

42.55

22.30

25.75

31.10

43.00

63.85

67.05

41.75

57.40

94.65

103.70

111.70

120.00

16 lb

s.11

.04

11.52

11.80

12.78

15.06

17.46

18.25

22.20

25.50

30.65

42.05

46.60

23.55

27.05

33.75

45.90

69.90

73.30

43.75

60.90

102.30

111.70

119.35

126.90

18 lb

s.11

.24

11.97

12.38

13.76

16.32

18.94

19.30

23.55

27.30

32.75

45.00

50.30

24.90

28.60

36.30

49.55

75.75

80.35

46.90

65.20

108.20

117.50

127.30

132.50

20 lb

s.11

.51

12.62

13.10

14.77

17.55

20.34

20.35

24.95

29.35

35.10

48.10

54.10

26.60

30.50

38.55

53.65

81.10

86.65

47.80

67.25

111.10

120.25

130.20

135.70

22 lb

s.11

.88

13.22

13.82

15.75

18.80

21.77

21.50

26.20

31.10

37.25

51.00

57.85

28.40

32.90

40.90

56.80

86.55

92.80

51.85

71.70

118.55

128.55

138.30

144.45

24 lb

s.12

.27

13.83

14.54

16.67

20.05

23.16

22.65

27.50

32.85

39.55

54.00

61.55

29.60

34.75

43.50

60.50

92.70

99.35

53.60

74.20

124.45

134.90

145.15

150.55

26 lb

s.12

.76

14.38

15.21

17.53

21.32

24.51

24.20

29.30

34.90

42.05

57.15

65.60

31.30

36.50

45.85

64.40

98.75

106.15

56.00

77.50

130.95

140.95

150.45

158.05

28 lb

s.13

.18

14.95

15.92

18.46

22.55

25.89

25.55

30.90

36.90

44.40

61.10

69.75

33.10

38.70

47.85

68.10

104.50

112.35

58.30

80.55

137.55

148.95

160.05

164.60

30 lb

s.13

.67

15.50

16.72

19.31

23.76

27.15

26.50

32.30

38.90

46.75

64.70

73.60

34.50

40.25

50.85

71.75

110.05

118.15

58.95

81.40

143.75

152.70

163.10

169.35

32 lb

s.13

.92

15.99

17.43

20.26

24.97

28.51

27.55

34.00

41.00

48.90

68.15

77.70

35.90

42.40

53.50

75.00

115.70

123.90

63.10

86.20

149.95

162.45

170.05

178.10

34 lb

s.14

.25

16.61

18.14

21.19

26.20

29.90

28.75

35.75

42.75

51.35

71.80

81.50

37.90

44.15

56.00

79.15

122.25

129.75

65.85

89.55

156.20

169.30

180.55

185.90

36 lb

s.14

.63

17.07

18.79

22.12

27.40

31.29

29.65

37.00

44.85

53.70

75.20

85.05

39.15

46.35

58.20

82.20

129.10

137.05

69.30

92.55

163.00

176.20

184.40

193.80

38 lb

s.15

.03

17.63

19.47

23.03

28.51

32.67

30.90

38.15

46.80

56.05

78.25

87.90

40.50

47.65

61.05

85.90

135.85

144.20

70.45

97.20

169.00

182.85

194.80

202.60

40 lb

s.15

.34

18.28

20.24

23.89

29.88

34.32

32.05

38.70

48.25

57.70

81.75

91.25

42.65

50.00

63.40

89.45

142.10

151.50

72.75

99.80

175.20

187.30

200.00

206.80

42 lb

s.15

.71

18.69

20.89

24.71

30.81

35.52

33.05

41.70

49.75

61.10

84.80

94.80

44.30

52.30

65.30

92.90

148.30

159.10

76.50

104.40

181.70

196.60

207.85

218.95

44 lb

s.16

.05

19.25

21.58

25.58

31.85

36.91

34.25

43.05

51.75

63.40

88.00

98.85

46.00

54.00

67.70

96.05

154.60

164.75

80.15

108.40

188.35

203.45

215.90

225.35

46 lb

s.16

.34

19.77

22.18

26.47

32.83

38.30

35.80

44.35

53.65

65.85

91.50

102.75

47.40

55.75

70.00

98.80

160.00

170.35

83.35

112.90

194.90

209.10

223.35

229.20

48 lb

s.16

.60

20.09

22.75

27.28

33.70

39.69

35.90

46.00

55.25

68.20

95.70

106.80

49.25

58.10

72.35

101.55

165.90

175.85

85.25

117.45

201.05

217.00

230.00

237.45

50 lb

s.16

.84

20.44

23.26

27.79

34.27

40.78

36.85

46.60

56.95

69.60

96.85

108.70

50.90

60.10

74.65

104.95

171.50

181.05

85.35

119.45

203.90

217.20

233.45

240.45

52 lb

s.17

.04

20.68

23.56

28.28

34.86

41.81

38.55

49.20

59.00

72.75

102.90

115.35

52.10

61.65

77.20

108.90

176.90

187.65

91.70

127.60

213.15

230.80

250.70

258.00

54 lb

s.17

.28

21.01

23.91

28.96

35.52

42.51

39.80

50.95

61.15

75.25

106.10

119.55

53.80

63.75

79.35

112.10

182.50

194.60

94.90

132.15

219.70

237.75

253.60

267.10

56 lb

s.17

.51

21.32

24.29

29.72

35.96

42.71

40.80

51.65

62.90

77.65

109.20

123.85

55.55

65.60

81.35

115.90

188.45

201.30

97.95

137.00

228.05

243.95

261.30

276.50

58 lb

s.17

.85

21.64

24.68

30.40

36.69

43.26

42.30

53.00

64.60

80.00

112.75

128.50

57.15

67.70

84.10

119.40

195.25

208.05

101.95

141.55

233.20

250.40

274.80

285.95

60 lb

s.18

.14

22.02

25.15

30.88

37.31

43.70

42.90

54.35

66.45

81.20

116.10

130.75

58.35

69.05

86.90

123.15

202.25

214.95

103.65

143.95

240.45

257.70

277.45

290.50

62 lb

s.18

.42

22.32

25.50

31.45

37.86

44.18

44.10

56.60

68.40

84.90

120.50

137.05

60.45

71.30

89.10

126.70

208.05

221.05

109.60

151.45

247.70

267.05

292.25

304.70

64 lb

s.18

.69

22.72

25.86

31.90

38.34

44.73

45.50

58.15

70.40

87.30

124.50

141.40

62.35

73.40

91.20

130.05

214.10

228.20

113.40

156.25

258.70

275.35

300.30

310.00

66 lb

s.18

.96

23.19

26.38

32.30

39.02

45.16

46.50

59.60

72.50

89.65

128.20

145.75

64.05

75.10

93.80

134.00

220.75

234.80

117.35

162.05

262.90

284.25

311.50

324.55

68 lb

s.19

.21

23.62

26.84

32.65

39.51

45.61

47.15

61.40

74.30

92.05

131.75

150.05

65.30

77.20

96.50

138.50

226.45

241.40

121.50

169.05

270.60

293.95

321.50

330.85

70 lb

s.19

.47

23.97

27.23

32.93

39.79

45.98

48.40

62.80

76.10

94.45

133.30

152.30

67.30

79.40

99.20

143.30

231.95

246.70

122.50

172.10

277.40

297.00

326.35

330.95

75 lb

s.23

.22

27.44

29.28

35.65

42.23

48.42

51.65

65.80

81.90

99.10

143.95

159.90

71.45

84.75

105.65

153.75

248.05

264.75

127.80

187.65

294.45

322.65

332.75

363.20

80 lb

s.26

.96

30.56

32.58

38.01

45.16

51.35

54.50

70.00

85.45

106.85

148.55

172.65

76.00

89.45

108.35

157.20

264.75

281.60

135.80

200.25

310.00

343.15

361.20

383.30

85 lb

s.30

.62

33.77

35.94

41.06

48.31

54.55

57.40

76.10

91.95

115.30

163.25

184.05

79.80

93.85

118.75

173.75

268.25

291.25

148.75

214.55

332.80

363.15

377.00

409.80

90 lb

s.35

.27

37.11

39.24

44.31

50.90

56.76

60.95

79.05

95.25

117.80

170.50

192.35

84.35

99.60

119.50

177.40

291.85

318.45

153.70

222.40

360.50

383.30

413.40

435.25

95 lb

s.39

.06

40.33

42.38

47.19

53.33

59.06

63.35

83.50

101.30

128.15

176.95

203.10

88.65

101.95

125.80

177.65

292.10

319.65

162.65

235.00

374.40

404.20

422.70

452.95

100

lbs.

43.20

43.63

46.04

50.22

56.01

61.65

68.60

87.25

105.70

133.50

190.05

217.20

92.30

103.80

133.60

195.00

321.75

345.75

178.70

252.60

402.40

433.10

462.85

482.05

105

lbs.

46.42

46.85

48.95

53.06

58.70

64.36

71.00

91.50

109.50

140.05

199.45

227.95

96.75

108.85

140.10

204.60

337.70

362.90

187.50

265.10

422.35

454.60

485.85

506.00

110

lbs.

49.68

50.15

51.64

55.63

61.32

67.11

75.15

95.70

114.55

146.55

208.80

238.65

101.25

113.90

146.65

214.20

353.60

380.00

196.25

277.60

442.30

476.10

508.85

529.95

115

lbs.

52.26

52.83

54.40

58.22

63.88

69.85

77.50

99.90

119.65

153.10

218.15

249.35

105.70

118.95

153.15

223.80

369.55

397.15

205.05

290.05

462.30

497.60

531.85

553.90

120

lbs.

55.25

55.53

57.16

60.70

66.34

72.43

80.70

104.10

124.70

159.60

227.50

260.05

110.15

124.00

159.70

233.40

385.50

414.30

213.85

302.55

482.25

519.10

554.85

577.85

125

lbs.

57.81

57.91

59.99

63.19

68.79

74.99

83.95

108.30

129.75

166.15

236.85

270.75

114.60

129.00

166.20

243.00

401.40

431.40

222.60

315.00

502.20

540.60

577.80

601.80

130

lbs.

60.52

60.68

62.82

65.67

71.21

77.52

87.20

112.55

134.85

172.65

246.20

281.50

119.10

134.05

172.75

252.60

417.35

448.55

231.40

327.50

522.20

562.10

600.80

625.75

135

lbs.

63.19

63.52

65.74

68.21

73.70

80.06

90.40

116.75

139.90

179.20

255.55

292.20

123.55

139.10

179.30

262.20

433.30

465.70

240.20

340.00

542.15

583.65

623.80

649.70

140

lbs.

65.91

66.48

68.78

70.99

76.54

82.86

93.65

120.95

145.00

185.70

264.90

302.90

128.00

144.15

185.80

271.80

449.25

482.85

248.95

352.45

562.10

605.15

646.80

673.70

145

lbs.

68.08

69.51

71.92

73.77

79.24

85.50

96.90

125.15

150.05

192.25

274.25

313.60

132.50

149.20

192.35

281.40

465.15

499.95

257.75

364.95

582.10

626.65

669.80

697.65

150

lbs.

70.57

72.59

75.64

78.48

82.10

88.29

100.15

129.40

155.10

198.75

283.60

324.30

136.95

154.20

198.85

291.00

481.10

517.10

266.55

377.40

602.05

648.15

692.80

721.60

Spring-LoadedSwitchCoversYour Choice

$1.95 each• Brand new. Spring-loaded switch covers for use with two-posi-tion, on-off switches to prevent accidental actuation. Designed foruse with switches with ½˝ diameter mounting stems. Available ina variety of colors (see item number suffix). Shpg. 1/10 lb. each.ITEM 11-3260-BLACK ITEM 11-3260-BLUEITEM 11-3260-CARBON ITEM 11-3260-CHROMEITEM 11-3260-CLEAR ITEM 11-3260-GREENITEM 11-3260-PURPLE ITEM 11-3260-RED

ITEM 11-3260-YELLOW

3 Hole SwitchMounting Panel

ITEM 11-332399¢• New, black plastic mounting panel for 3 switches. Could also beused for indicator lights. Angles slightly upward when mounted toflat surface. Self tapping screws included.SPECIFICATIONS• Hole count 3 • Hole dia. ½˝ • Size 3¾˝ x 1½˝ • Shpg. ¼ lb.

Rubber CoverFor ToggleSwitchITEM 11-3250$1.05• New, rubber cover for lever on toggle switches. Helps keep mois-ture and dust out of switch.SPECIFICATIONS• Thread size M12 x 0.75 • Size 9/16˝ dia. x 1˝ • Shpg. 1/10 lb.

148 Toggle Switches & Accessories www.surpluscenter.com8Toggle Switches• Brand new, snap action toggle switches. Includeslegend plate. Screw terminals. Contact ratings 20Amps at 125 VAC, 15 Amps at 250 VAC. Shpg. ¼ lb.

ITEM 11-3217 SPST $1.95ITEM 11-3218 SPDT-CO $2.39ITEM 11-3219 DPST $2.55ITEM 11-3220 DPDT-CO $3.35ITEM 11-3259 DPDT-CO Momentary $3.35ITEM 11-3279 DPDT-CO Momentary/Maintained $3.354PDT-CO Toggle Switch

ITEM 11-3221 $4.80• Brand new, snap action toggle switch. Includes leg-end plate. Screw terminals. Contact ratings 15 Ampsat 125 VAC, 10 Amps at 250 VAC. Shpg. ½ lb.

DPDT-CO Toggle Switch

ITEM 11-3261 $2.70• Brand new, toggle switch. Includes legend plate.Screw terminals. Contact ratings 10 Amps at 125VAC, 6 Amps at 250 VAC. Shpg. ¼ lb.

SPST Illuminated Toggle Switch

ITEM 11-3202-C $2.49• New, clear illuminated toggle switch. Contact rat-ing 25 Amps at 125 VAC, 20 Amps at 250 VAC.Lamp voltage 12 VDC. Shpg. 1/10 lb.

SPDT-CO 6 Amp Toggle Switch

ITEM 11-3069 $1.49• New, three position toggle switch. SPDT-CO switch.Contact ratings 6 amps at 120 VAC, 3 amps at 240VAC. Spade terminals w/screws. Shpg. 1/10 lb.

DPST 6 Amp Toggle Switch

ITEM 11-3099 $1.49• New CUTLER HAMMER double pole, single throwtoggle switch. 3 amps at 250 VAC, 6 amps at 125VAC. Solder terminals. Shpg. 1/10 lb.

SPST 6 Amp Toggle Switch

ITEM 11-2287 $2.99• New McGILL. ON/OFF snap action switch. Rated 6amps at 125 volt AC, 3 amps at 250 volt AC. Push onspade terminals. Shpg. ¼ lb.

DPDT-CO 15 Amp Toggle Switch

ITEM 11-3262 $2.29New, CARLING double pole double throw center offmomentary toggle switch. Rated 10 amps at 250VAC and 15 amps at 125 VAC. Solder terminals.Shpg. ¼ lb.

SPDT-CO 15 Amp Toggle Switch

ITEM 11-3263 $1.99New, CARLING single pole double throw center offmomentary toggle switch. Rated 10 amps at 250VAC and 15 amps at 125 VAC. Solder terminals.Shpg. ¼ lb.

SPST Toggle Switch

ITEM 11-3287 $1.49• New, CALTERM 40100 black duckbill lever SPSTmaintained toggle switch. 20 Amps at 12 VDC.Switch positions 2 (on-off). ¼˝ spade terminals.Mounting ½˝ hole. Shpg. 1/10 lb.

SPST Toggle Switch

ITEM 11-3247 50¢• New, McGILL snap action toggle switch. Plastichousing and toggle lever. ¼˝ spade terminals. Con-tact ratings 12 Amps at 125 VAC, 6 Amps at 250VAC. Snaps into 0.71˝ x 1.43˝. Shpg. 1/10 lb.

4PDT 15 Amp Toggle Switch

ITEM 11-3264 $4.99New, CARLING four pole double throw, heavy dutyslow make and break type momentary toggleswitch. 10 amps at 250 VAC, 15 amps at 125 VAC.Solder terminals. Shpg. ¼ lb.

DPST Toggle Switch

ITEM 11-2340 $2.95• New CARLING. All plastic body/toggle for safety.DPST snap action (ON/OFF) switch. 15 amps at 125volt AC, 10 amps at 250 volt AC. ½ HP at 125 voltAC. Spade terminals. Shpg. ¼ lb.

SPST Illuminated Toggle Switches• New, CALTERM duckbill lever SPST maintainedaction toggle switches. Contacts 20 Amps at 12VDC. Switch positions 2 (on-off). ¼˝ spade termi-nals. Mounting ½˝ hole. Shpg. 1/10 lb.

ITEM 11-3286-A Amber glow $1.99ITEM 11-3286-G Green glow $1.99

When you are in the area visitour showroom at

1015 West “O” Street, Lincoln, NE

800-488-3407 Rocker Switches 149&

SPST Rocker SwitchITEM 11-3237 $1.99• New, CALTERM rocker switch with green LED inrocker. Lights when switch is on. 12 Volt DC. Con-tact rating 20 Amps at 12 VDC. Snaps into 1⅛˝ x 7/16˝opening. Shpg. ¼ lb.SPST Rocker SwitchITEM 11-3238 $1.99• New, CALTERM rocker switch with green LED inrocker. Lights when switch is on. 12 Volt DC. Con-tact rating 25 Amps at 12 VAC. Mounting 15/16˝ hole.Shpg. ¼ lb.10 Amp ON/OFF Rocker SwitchITEM 11-2478 $2.79• New ENERPAC. SPST rocker switch. Spade ter-minals. Mounts in ½˝ x 1⅛˝ opening. Contacts rated10 amps at 125 VAC. Shpg. 1/10 lb.20 Amp Rocker Switches• New, McGILL. Plastic rocker and housing. 20 ampsat 277 VAC, 1½ HP. 117/32˝ x 29/32˝ face. Mounts in 115/32˝x 13/16˝ opening. ¼˝ spade terminals. Shpg. 1/10 lb.

ITEM 11-3125 SPDT $1.29ITEM 11-3126 DPDT $1.49DPST 16 Amp Rocker SwitchITEM 11-3123 $1.99• New, DPST rocker switch. 16 amps at 250VAC.Plastic housing. Held in place with plasticspring tabs on sides. ¼˝ spade terminals. 1˝ x 1¼˝rectangular face. Shpg. 1/10 lb.DPST Rocker SwitchITEM 11-3083 $1.49• New. DPST switch. 16 amps at 125-250 VAC, ¾HP at 125-250 VAC. Plastic housing. Held in placewith plastic spring tabs on sides. 19/32˝ x 27/32˝ face.3/16˝ spade terminals. Shpg. 1/10 lb.DPST Rocker SwitchITEM 11-3088 95¢• New. DPST switch. 10 amps at 125 VAC, 6 ampsat 250 VAC. Plastic housing. Held in place with plas-tic spring tabs on sides. 19/32˝ x 27/32˝ face. 3/16˝ spadeterminals. Shpg. 1/10 lb.DPDT-CO Rocker SwitchITEM 11-2490 $2.95• New. Double pole, double throw, center off main-tained rocker switch. Snaps into ⅞˝ x 1˝ opening.Contacts rated 16 amps at 125 VAC, 10 amps at250 VAC. Spade terminals. Shpg. 1/10 lb.SPST 15 Amp Rocker SwitchITEM 11-3066 95¢• New, SPST ON/OFF rocker switch. Plastic hous-ing with tabs to hold switch in place. Contact ratings15 amps at 125 VAC, 7.5 amps at 250 VAC. ⅛˝spade terminals. Shpg. 1/10 lb.DPDT Momentary Rocker SwitchITEM 11-3245 $1.49• New, E-SWITCH type R5 momentary rockerswitch. White plastic housing. ¼˝ spade terminals.Contact ratings 20 Amps at 125 VAC, 16 Amps at250 VAC. Mounting ⅞˝ x 1.18˝. Shpg. 1/10 lb.

SPST Illuminated Rocker Switches• New, CALTERM SPST maintained action rockerswitches. Contacts 16 Amps at 12 VDC. Switch po-sitions 2 (on-off). ¼˝ spade terminals. Mounting ½˝hole. Shpg. 1/10 lb.

ITEM 11-3330-A Amber glow 99¢

ITEM 11-3330-G Green glow 99¢

SPST Rocker Switch

ITEM 11-2342-A $1.25• New CARLING SPST momentary switch, OnOFF/ON label. Rated 15 amp at 125 volt AC, 10 at250 volt AC. ¾ HP, 250 volt AC. Mount in 1½˝ x ¾˝hole. Push on terminals. Shpg. ¼ lb.SPDT-CO Rocker Switch

ITEM 11-2534 $2.69• New EATON. SPDT-CO spring to center rockerswitch. Rated 20 amp resistive load, 10 amp induc-tive load at 12 volt DC. Push on spade terminals.Snaps into 1¾˝ x ⅞˝ opening. Shpg. ¼ lb.SPDT-CO 20 Amp Rocker Switch

ITEM 11-3100 $2.29• New, SPDT-CO rocker switch. 20 amps at 125-250VAC. Plastic housing with plastic spring tabs onsides. 15/16˝ x 123/32˝ rectangular face. ¼˝ spade termi-nals. Shpg. 1/10 lb.SPDT-CO Rocker Switch

ITEM 11-3090 $1.75• New SPDT-CO switch. Plastic housing. 16 ampsat 250 VAC ¼ HP at 125 VAC. 1¼˝ x 11/16˝ face.Mounts in 1⅛˝ x 17/32˝ opening 1˝ deep. ¼˝ spade ter-minals. Shpg. 1/10 lb.SPDT 16 Amp Rocker Switch w/Cover

ITEM 11-3153 99¢• New SPDT switch. Plastic housing, clear flexibleplastic cover over rocker. ¼˝ spade terminals. 16amps at 250 VAC, ½ HP at 125 VAC. 1 HP at 250VAC. 17/16˝ x 11/16˝ face. Mounts in 1⅛˝ x 17/32˝ opening1˝ deep. Shpg. 1/10 lb.SPST 6 Amp Rocker Switch

ITEM 11-2440 $1.95• New SCHURTER. Lighted rocker switch. SPST.Lights in “ON” position. Rated for 120 VAC, 6 ampsmax. Mounts in a 1¾˝ x ⅞˝ opening. Switch face is1˝ x 1⅞˝. Shpg. ⅕ lb.SPDT-CO 15 Amp Rocker Switch

ITEM 11-2477 $1.95• New CARLING. SPDT-CO maintained rockerswitch. 10 amps at 250 VAC, 15 amps at 125 VAC,¾ HP at 125-250 VAC. Snaps into 17/16˝ x 13/16˝ rec-tangular opening. Three spade terminals on rear ofswitch. Shpg. 1/10 lb.SPST 16 Amp Rocker Switch

ITEM 11-3206 89¢• New, single pole, single throw rocker switch.Spade terminals. Contact ratings 16 Amps at 125VAC, 12 Amps at 250 VAC. Snaps into ½˝ x 11/16˝opening. Shpg. 1/10 lbs.SPST Rocker Switch

ITEM 11-3089 89¢• New. SPDT switch. 10 amps at 125 VAC, 6 ampsat 250 VAC. Plastic housing. Held in place with plas-tic spring tabs on sides. 19/32˝ x 27/32˝ face. 3/16˝ spadeterminals. Shpg. 1/10 lb.SPST Rocker Switch

ITEM 11-3321 79¢• New, CARLING Model RA901-RB-B-0-N Curvetteseries SPST maintained rocker switch. Contact rat-ings 16/10 Amps at 125/250 VAC, ¾ HP. Termina-tion 0.250˝ spade. Switch positions two. Mtg. hole1.125˝ x 0.550˝. Shpg. 1/10 lb.SPDT-CO Momentary Mini Rocker Switch

ITEM 11-2542 99¢• New. SPDT center off momentary rocker switch.Rated 6 amps at 125/250 volts AC. Spade termi-nals. Snaps into ¾˝ x ½˝ hole. Shpg. ⅕ lb.

Switch & HarnessAssembly

ITEM 11-2289 $5.95• New, McGILL. Toggle and pushbuttonswitches and wiring harness assembly.One SPST ON/OFF toggle switch, rated 6amps at 125 volt AC. One DPST ON/OFFtoggle switch, rated 15 amps at 125 voltAC. Two momentary SPNO pushbuttonswitches, rated 15 amps at 125 volt AC. In-stalls in ½˝ hole. Shpg. ½ lb.

4 PositionKeyswitch

ITEM 11-1622$2.99• 4 position 4 pole keyswitch. Removablekey in any position. 4 amp at 125 VAC. Fitsstandard “D” hole. Comes with 2 keys.Shpg. ½ lb.

SPST N.O.MomentaryPushbuttonSwitch

ITEM 11-3297$6.55• Brand new, BUYERS SW901 panelmount momentary push button switch.Moisture repellent insulator.SPECIFICATIONS • Switch positions two• Contacts SPST • Face size 7/16˝ diam.• Switch type pushbutton • Mtg. stem ⅝˝-32 x ¾˝• Srew terminals • Mounting depth 1¾˝• Action momentary • Shpg. ¼ lb.

Panel Mount PushbuttonSwitch

ITEM 11-2498$14.95• New, GENERAL ELECTRIC 080PLIG/ -080BF10V/ 080ADV24. Normally open illu-minated momentary pushbutton switch.Panel mount in 11/16˝ hole. 10 amp con-tacts. Bulb included. White lens. Size 3⅜˝x 1½˝ x 1⅛˝. Shpg. ¼ lb.


on pages 146 - 147

SPST N.O. MomentaryPush-ButtonSwitch

ITEM 11-306499¢• New, normally open momentary push-button switch. Plastic and metal construc-tion. Jam nut included.SPECIFICATIONS • Contact ratings• SPST N.O. momentary 6 amps at 120 VAC• Mounts in ½˝ dia. opening 3 amps at 240 VAC• Spade terminals • Shpg. 1⁄10 lb.

150 Switches www.surpluscenter.com8DPST PushbuttonITEM 11-1336 $1.29• Snap action, single hole mount. 40 watts at 125VAC. 6˝ wire leads. Size 1½˝ x 1˝ x ¾˝. Shpg. ½ lb.ON/OFF PushbuttonITEM 11-2108 $1.99• New OSLO CONTROLS. Momen tary pushbutton.Rated 125 volt AC, 10 amps. Snaps into ⅞˝ x 13/16˝hole. Shpg. ¼ lb.SPNC 16 Amp Paddle SwitchITEM 11-3115 95¢• New, SPNC momentary paddle switch. 16 ampsat 125 VAC, 10 amps at 250 VAC, 3/4 HP at 125-250 VAC. ¼˝ spade terminals. Shpg. 1⁄10 lb.SPST ON/OFF PushbuttonITEM 11-2450 $1.49• Snap action, ⅜˝ single hole mount. 6 amp at 125VAC, 3 amp at 250 VAC. Fine replacement switchfor motor driven tools, lamps, etc. 6˝ wire leads. Size1¼˝ x ⅞˝ x ¾˝. Shpg. ½ lb.2 Circuit, 4 Position Rotary SwitchITEM 11-3080 $1.99• New, 4 position rotary switch for turning two cir-cuits ON and OFF. Plastic housing. 6˝ wire leads. 6amps at 125 VAC, 3 amps at 250 VAC. Shpg. 1⁄10 lb.

SPST N.O. 15 Amp Pushbutton Switch

ITEM 11-3187 $2.49• New, CALTERM Model 42210 SPST N.O. momen-tary push-button switch. Plastic and metal con-struction. Jam nut included. 15 amps at 12 VDC.Mounts in ⅝˝ dia. opening. Shpg. ¼ lb.

2 Button ON/OFF Switch

ITEM 11-2397 $1.49• New. Snap action, 2 button ON/OFF switch.Rated 16 amps, ⅓ HP at 125 volt AC; ½ HP at 250volt AC. Mounts in 1¼˝ x ½˝ hole. Size 1¼˝ x 1⅜˝ x9/16˝. Shpg. ¼ lb.

SPST Slide Switch

ITEM 11-2173 89¢• New. ON/OFF slide switch. CSA and UL Listed.¾ HP at 125 volt AC. 12 amp at 250 volt AC.Snaps into 9/16˝ x 1⅜˝ opening. Push on terminals.Shpg. ¼ lb.

DPST 15 Amp Paddle Switch

ITEM 11-3098 $1.49• New, DPST paddle switch. Orange paddle is ⅝˝wide by ⅞˝ long. 10 amps at 250 VAC, 15 amps at125 VAC, ¾ HP at 125 VAC. Two hole mount 1⅝˝c/c. ⅛˝ spade terminals. Shpg. 1⁄10 lb.

SPDT 1 Amp Long WireLever Microswitch

ITEM 11-3249$1.29

• New, ZIPPY Model CNR-05S-03Z lowtorque switch. Plastic housing, 0.6 mm x 80mm long wire lever arm. Two 3.1 mm mount-ing holes on 23.8 mm x 8.7 mm centers.SPECIFICATIONS• Contact type SPDT• Contact ratings • Actuator type lever arm0.1 Amps at 30 VDC VAC • Terminals 5mm spade1 Amp at 125/250 VAC • Min. actuator force250 VAC max. 7.6 gf-cm to actuate

• Actuator travel • Mount two thru holes18° to operate • Size9° to release 31 mm x 19.2 mm x 17.5 mm45° max travel • Shpg. 1⁄10 lb.

SPST N.O. Heavy DutyMomentaryPushbuttonSwitch

ITEM 11-3296$13.95• Brand new, BUYERS BSW002 heavyduty flange mount momentary pushbuttonswitch. Heavy duty spring for push buttonto prevent accidental activation.SPECIFICATIONS• Switch type pushbutton • Face size 2⅛˝ x 27/16˝• Termination • Mounting two holes5/16˝-24 stud terminals on 1¾˝ centers

• Action momentary • Mounting depth 17/16˝• Switch positions two • Shpg. ½ lb.

BatteryClampPairITEM 11-2356$8.99• New, CENTURY. Heavy duty red/blackbattery clamps with 18˝ #4AWG copperleads. Clamps are tough phenolic materialwith large aluminum teeth. Use on batterychargers, test bench, etc. Red is marked+. Black marked –. Shpg. 3 lbs.

RV/Mobile HomeAdapterITEM 11-3225$3.95• New, Electricord (Leviton) Model C-1427-009-BL. Male end plugs into 30 amp 125Voutlet and converts to standard 15 amp fe-male.SPECIFICATIONS • Jacketing type STW• Conductor gauge 12 • End 1: 30 Amp 125 V male• Conductor count 3 • End 2: 15 Amp 125 V female• Length 9˝ • Shpg. 1 lb.

12 VDC WirelessRemoteControls

• New. Wireless remote control receiver/ -transmitter combination. All circuits havecommon input. Each circuit is controlled sep-arately from the buttons on the remote trans-mitters. Contacts close and remain closed foras long as the button on the transmitter is de-pressed. Code learning feature on receiverfor easy programming (no DIP switches orcircuit board traces to cut). Receiver has re-mote 3½˝ antenna on 9 ft. cable for greaterrange than similar units with internal antenna.Requires battery as power source.SPECIFICATIONS FOR BOTH• 12 VDC • 2 bolt base mount 3¾˝ ctrs.• Contacts rated1 amp max. • Size 4⅛˝ x 2½˝ x 1¼˝ • Shpg. 2 lbs.

Dual ChannelITEM 11-2495 $50.95• Two SPNO contacts. Includes two key-ring style, 2-pushbutton transmitters andinstructions.Three ChannelITEM 11-2495-3 $53.95• Two SPNO circuits, one SPDT circuit. In-cludes two key-ring style, 3-pushbuttontransmitters and instructions.

Rotary LimitSwitchITEM 11-3326$28.95• New HONEYWELL LSP1A.Heavy duty rotary limit switch.Spring centering. One set N.C.contacts open in either direc-tion, one set N.O. contacts close in eitherdirection. 9° rotation for actuation. ½˝ con-duit connection. Weather-proof housing.SPECIFICATIONS• Contacts two SPST(one N.O. and one N.C.) • Operating torque 4 in.lbs.

• Voltage 120-600 AC • Shaft 0.284˝ dia. x ⅝˝• Amps 10 serrated• Travel info: • Terminals screwPre-travel 9° • Mount 2 holes thru bodyOver-travel 66° • Size 4⅛˝ x 1⅝˝ x 1⅝˝Total travel 75° • Shpg. 2 lbs.

IEC Standard C14 ACPower InletITEM 11-332079¢• New, snap-in power inlet connector forchassis mount applications. Black thermo-plastic construction. Accepts standardC13 plug.SPECIFICATIONS• Conductors 3 • Connector type C14• Rating 10/15A at 250 VAC • Termination 0.250˝• Panel quick connectcutout size 1.062˝ x 0.807˝ • Size 1⅛˝ x 1¼˝ x 15/16˝thickness 0.031˝ to 0.078˝ • Shpg. 1/10 lb.

800-488-3407 Microswitches & Remote Controls 151&

MicroswitchPairITEM 11-1346$1.89• New takeoffs. Unique pair of SPDT mi-croswitches with common roller spring ac-tuating arm. Set screw adjustment allowsone switch to be actuated a fraction of asecond before the other. Use to sequenceitems with very small time interval.Mounted on steel bracket.SPECIFICATIONS • Contacts rated• Two SPDT switches 5 amps at 125-250 VAC• Size 3½˝ x 2½˝ x 1˝ • Shpg. ¼ lb.

115 VACBuzzer

ITEM 1-1877$2.99• New, general purpose buzzer, soundlevel similar to engraver or hair clippers.Plated metal housing.SPECIFICATIONS • 2 bolt mount on 3½˝ ctrs.• 115 VAC • Size 4˝ x 3˝ x 1½˝• 8 watts • Shpg. 1 lb.

12 VDC Seven ChannelWirelessRemoteControl

ITEM 11-3305 $59.99• Brand new. Wireless remote control re-ceiver/transmitter combination. First 2channels have 30 amp relay outputs.Channels 3-7 are 500 ma output to powerexternal relays (not included). Each circuitis controlled separately from the buttonson the remote keychain transmitter.• Code learning feature on receiver for easyprogramming. DIP switches on receiver toselect activation as long as transmitter but-ton is depressed or momentary pulse forchannels 1, 2, 6 and 7.• Ignition lockout option disables channels1-4 when powered. Switch connections forchannels 1 and 2 allow for manual switch(not included) to activate in addition to re-mote transmitter.• Can be operated from 12 Volt DC powersupply or battery. Only draws 0.15 amps.• Receiver has 14˝ antenna. 100 ft. rangewith clear line of sight. Includes 2 keychainstyle 4-pushbutton transmitters and full in-structions with application examples.SPECIFICATIONS• Voltage 12 VDC • Connections• Channel 1-2 output relay Channel 1-2,• Relay contacts spade terminalsRating 30 Amp max Channel 3-7 and power,

• Relays SPDT 10 pin connector(common N.O. connection) • Mount two hole, 3⅞˝ c/c

• Channels 3-7 • Size 4⅛˝ x 4˝ x 1¼˝output -500 m.a. • Shpg. 2 lbs.

12/3 PowerCord

ITEM 11-2388$3.95• New. Power cord with L5-20P, 20 amp, 1HP, 125 volt AC molded twist lock plug. 12AWG/3 type SJT. 6 feet long. Shpg. 2 lbs.

18/3 80˝ PowerCord

ITEM 11-3319$1.29• New three conductor power cord. SJTjacket type. Standard 3 prong molded plugon one end, right angle IEC female onother end.SPECIFICATIONS• Conductor gauge 18 • Jacketing type SJT• Conductor count 3 • End 1: 3 prong male plug• Length 80˝ • End 2: IEC C13• Rating 10A at 120 VAC • Shpg. ½ lb.

Top Quality Microswitches• For limit switches, burglar alarm systems,etc. Shpg. ¼ lb.

Standard Size MicroswitchesStandard size 1⅞˝ x ¾˝ x ⅝˝.

Pushbutton

A B

ITEM CONTACTS AMP PRICE

(A) 11-1901 SPNO 15 80¢(B) 11-2541 SPDT 15 $1.29

Lever Type


11-3078-A SPNO 20 $2.29

Tit Type


11-975 SPNC 10 85¢

Mini Size MicroswitchesMini size 1⅛˝ x ⅝˝ x ⅜˝.

Lever Type


11-1516 SPNC 10 60¢11-1515 SPNO 10 63¢

Subminiature MicroswitchesSubminiature size ¼˝ x ¾˝ x ½˝.

Lever Type


11-3322 SPNO 5 69¢

3PST RotarySwitch

ITEM 11-1906$9.99

• New, ELECTROSWITCH. 3 sets of con-tacts rated 10 amps, 120 VAC. Handlesnaps to 4 different positions. All contactsopen in two positions, closed in other two.Mount through panel with ¼˝ opening. Size2¾˝ x 2¼˝ x 3¾˝. Shpg. 1 lb.

152 Specialty Switches www.surpluscenter.com8

Handheld PendantSwitch ForSA PowerPacks

ITEM 11-3255 $29.95• New, VASTO Model VHS-61 handheldpendant switch. Ideal for controlling a sin-gle-acting powerpack. Gasketed plastichousing is weatherproof and dustproof.SPECIFICATIONS• Pushbuttons two normally open, momentary• Contact ratings 5 Amps 250 VAC max.• Cord 18/3, 20 ft. long • Shpg. 3 lbs.

12 VDC Heavy DutyDisconnectSwitch

ITEM 11-3294$18.95• Brand new, BUYERS Model SW700heavy duty master disconnect switch.SPECIFICATIONS • Screw terminals• Contacts SPST • Action maintained• Contact ratings: • Switch positions two20 Amps at 12 VDC cont. • Face size 2½˝ diam.125 Amps at 12 VDC int. • Mounting panel ¾˝-1615 sec. ON & 5 min. OFF • Mounting depth 215/16˝

• Switch type rotary • Shpg. 1 lb.

12 VDC Heavy DutyReversingSwitch

ITEM 11-3295$16.95• Brand new, BUYERS PRODUCTS Part #SW710 reversing switch. Heavy-duty 50Amp rotary switch controls forward and re-verse motion of a 12-volt motor without re-quiring a relay. Ideal for use with 12 VDClinear actuators, gearmotors and otherpermanent magnet motors. Commonlyused on 12-volt truck and trailer tarp sys-tems. Three positions: momentary-ON,OFF, momentary-ON. Terminal hardwareincluded.SPECIFICATIONS • Action momentary• Contacts DPDT-CO • Switch positions ON-OFF-ON• Contact rating • Face size 2˝ dia.50 Amps at 12 VDC • Mounting ½˝ hole

• Switch type rotary reversing• Mounting depth 1⅞˝• Four screw terminals • Shpg. 2 lbs.

ReversingDrum

Switch

ITEM 11-1580$58.95

• Brand new, DAYTON Model 2X440A drumtype reversing switch. Double pole, doublethrow, center-off maintained. Heavy dutycopper contacts, painted steel housing,bakelite arc shields. Can be used with DCmotors for reversing only (not suggested forstart/stop operation). UL and CSA listed.SPECIFICATIONS • Contact ratings• DPDT-CO, maintained 1½ HP at 115 VAC• Two bolt base mount 2 HP at 230 VAC, 1 Ph.on 1⅝˝ centers ¼ HP at up to 230 VDC

• Size 2¼˝ x 4˝ x 4¼˝ • Shpg. 2 lbs. Handheld Two ButtonPendantSwitches

SPECIFICATIONS FOR BOTH• Pushbuttons 2 Normally open • Cord 18/3 14 ft. long• Contact rating 5 amp 250 VAC • Shpg. 3 lbs.

ITEM 11-3244 $29.99• New dual pushbutton handheld remote.Set up for use with power up/power downdouble acting hydraulic units. Three wirecontrol with input connecting to both outputwires when “up” is pressed and input to onlyone output wire when “down” is pressed.

ITEM 11-2201 $29.95• Brand new. For power-up, gravity downpowerpacks. Ideal for remote control ofsingle acting hydraulic power units, etc.Weatherproof plastic housing.

11-30 VDCMulti-AxisTilt AlarmITEM 11-2458$39.95• New, SUNDSTRAND-SAUER MCA100A.Multi-axis tilt alarm. Rugged tilt sensor canbe mounted to the frame of most any vehi-cle to warn the operator when the sensor istilted to an angle of 4.5° from level. Damp-ing fluid inside the sensor prevents falsealarms. Reverse polarity and short-circuitprotected. Instructions included.SPECIFICATIONS• 11-30 VDC• Output amps: • Size 3.15˝ x 3.15˝ x 3.27˝0.2 nominal, 0.3 max. • Shpg. 1 lb.

SPST MomentaryPushbuttonSwitch

ITEM 11-3293$5.10• Brand new, BUYERS BSW90030 panelmount momentary normally open pushbut-ton switch. Weather and dust proof hous-ing. Originally intended for vehicle uses.SPECIFICATIONS • Action momentary• Contacts SPST • Switch positions two• Contact ratings • Face size 15/16˝ diam.35 amps at 12 VDC • Mtg. stem ⅝˝-32 x 21/32˝

• Switch type pushbutton • Mounting depth 1¾˝• Srew terminals • Shpg. ¼ lb.

SPST 10 AmpToggleSwitchw/ Recessed Pan

ITEM 11-3298$7.30• Brand new, BUYERS Model SW911 tog-gle switch recessed in a pan. Recessedpan prevents accidental activation and pro-tects switch from impacts. 20 gauge platedsteel pan. Mounts in 2˝ diameter hole, with3 holes on 2⅝˝ diameter bolt circle.SPECIFICATIONS• Contacts SPST • Action maintained• Contact ratings • Switch positions two10 Amps at 12 VDC • Face size 33/16˝ dia.12 VDC max. • Mounting flange

• Switch type toggle • Mounting depth 2˝• Spade terminals • Shpg. ¼ lb.

Waterproof 12 VDCBatteryIsolatorSwitch

ITEM 11-3299 $8.95• Brand new, BUYERS PRODUCTS CO.Part # 6391200 battery isolator key-switch.Excellent for marine or automotive use.Circuit closes when key is locked in place.Waterproof plastic housing with water-re-sistant rubber cover. Removable twist-lockplastic key.SPECIFICATIONS• Contacts SPST • Action maintained• Contact ratings at 12 VDC • Switch positions two100 Amps cont. • Face size 211/32˝ dia.500 Amps max surge • Mounting four 3/16˝ holes

• Switch type rotary isolator• Mounting depth 1½˝• Termination two ⅜˝-16 studs • Shpg. ½ lb.

Key Switch/RockerSwitchPanelITEM 11-3267$7.99• New, plastic panel with keyswitch andmomentary rocker switch. Built for slidingrooms on recreational vehicles.SPECIFICATIONS• Keyswitch SPST • Rocker switch SPDT-COScrew terminals Spade terminalsAction maintained Action momentarySwitch positions two Switch positions three Contacts 13 amp 125 VAC• Face size 5⅞˝ x 3¾˝ • Mounting depth 1⅝˝• Mounting 5¼˝ x 3¼˝ • Shpg. ½ lb.

Control Cablewith Handle

ITEM 1-2331$3.95• New. Throttle control cable with controlhandle assembly. Friction in handle as-sembly holds cable position. Handle de-tent at full throttle position. Stop, slow-fast,and choke positions marked.SPECIFICATIONS• 0.055˝ diam. cable in • Handle size 2½˝ x 9/16˝ x 3˝0.190˝ O.D. steel jacket • Two bolt mount on handle

• Total pull 1⅝˝ assembly on 1½˝ centers• Cable lgth. 30˝ max. • Shpg. 1 lb.

90˝ Control CableITEM 1-3488$1.99• New, steel control cable. Vinyl coating oninner cable for smooth travel. Spring at oneend. Includes one attachment bracket onjacket. Snaps into 9/16˝ hole at each end.(Removing spring gives additional 3˝ oftravel).SPECIFICATIONS • Jacket O.D. 7/16˝• Total lgth. 90˝ • Connector 1: ⅜˝ dia. barrel• Travel 5˝ to start of • Connector 2:spring compression Open rectangle 0.25˝ x 0.55˝

• Cable dia. 0.15˝ • Shpg. 3 lbs.

78˝ Control CableITEM 1-3487$1.99• New, steel control cable. Vinyl coating oninner cable for smooth travel. Includes 3attachment brackets on jacket. Snaps into9/16˝ hole at each end.SPECIFICATIONS• Total lgth. 78˝ • Jacket O.D. 7/16˝• Travel 3⅜˝ • Connectors ⅜˝ dia. barrel• Cable dia. 0.15˝ • Shpg. 2 lbs.

800-488-3407 Gear Pullers & Control Cables 153&

Cast Iron Clevis Ends ITEM 1-1766-J ITEM 1-1766-K

• New. Cast iron clevises for building linkages. Furnished without pins.

Pin Width Width Overall ITEM Size Inside Outside Length Thread Shpg. Price 1-1766-J ½˝ 9/16˝ 1⅛˝ 3˝ ½˝-20 ½ lb. $1.99 1-1766-K ½˝ 9/16˝ 1⅛˝ 2⅝˝ ½˝-20 ½ lb. $1.49 1-1766-L ½˝ 9/16˝ 1⅜˝ 3˝ ¾˝-16 ½ lb. $2.99 1-1766-G ¾˝ ¾˝ 1⅝˝ 6¾˝ ¾˝-16 2 lbs. $3.95

75˝ Heavy DutyControlCableITEM 1-2294 $5.99• New, heavy duty control cable with thickprotective jacket.SPECIFICATIONS• 75˝ end-to-end length • 2nd end:• 45/16˝ travel steel clevis for 5/16˝ pin,• ½˝ O.D. sheathing 7/16˝ outside clevis width,• 3/16˝ diam. steel cable 3/16˝ between clevis ears• 1st end: 5/16˝-24 x 1˝ M • Spring retainer each end• Shpg. 4 lbs. mounts in 9/16˝ dia. opening

Control Cablew/Handle

ITEM 1-2849$4.95• New throttle-control cable with controlhandle assembly. Friction in handle as-sembly holds cable position. Two handledetent positions. Hooked cable end.SPECIFICATIONS • Overall handle size• 0.05˝ diam. cable in 3½˝ x 1⅞˝ x 3½˝0.2˝ O.D. steel jacket • Two bolt mount on handle

• 17/16˝ total pull distance assembly on 113/16˝ ctrs.• 49˝ max. cable length • Shpg. ½ lb.

Rotary Push/PullControl CableITEM 1-3316$4.99• New, push/pull control cable with rotaryinput. Full cable travel achieved with ¾ ro-tation of the knob. Knob stem threaded7/16˝-28. Knob not included.SPECIFICATIONS• Cable dia. 1/16˝ • Jacket ¼˝ O.D. x 70˝ long• Cable travel 19/16˝ • Knob stem• Cable lgth. 72⅞˝ ¼˝ dia. x ½˝ w/ flat• Cable end bent hook • Shpg. ½ lb.

Control Cablew/HandleITEM 1-2850$3.95• New throttle-control cable with controlhandle assembly. Friction in handle as-sembly holds cable position. Two handledetent positions. Hooked cable end.SPECIFICATIONS • Overall handle size• 0.05˝ diam. cable in 3½˝ x 1⅞˝ x 3½˝0.25˝O.D. rubber/steel jacket • Two bolt mount on handle

• 9/16˝ total pull distance assembly on 2˝ ctrs.• 30¾˝ max. cable length • Shpg. ¼ lb.

Shock Absorber

ITEM 1-1557 $3.95• New. Built for use on exercise equip-ment. Provides resistance on extensiononly. 12½˝ travel. Collapsed lgth. 16¾˝. 5/16˝hole at base, ⅝˝ on rod. ½˝ diam. rod. 1½˝OD tube. Shpg. 3½ lbs.

Control Cablewith SpringITEM 1-2584$4.95• New, control cable with hooked spring onone end, clevis on other end. Rubber-coatedsteel jacket with plastic liner for smooth op-eration. ¼˝-28 x 1¼˝ threaded end with re-movable clevis. Cable lgth. is center ofspring hook to center of clevis pin hole.SPECIFICATIONS• 0.1˝ diam. steel cable in • Clevis end0.3˝ O.D. jacket 15/32˝ outside width

• 3⅜˝ total pull distance ¼˝ inside width• 49½˝ cable length 13/32˝ pin hole• Jacket lgth. 37½˝ • Shpg. 1 lb.

Truck HoistControlCableITEM 1-1892 $29.99• New. Manual control cable for operatingtruck hoist valve from the cab. Safety in-terlock button must be pressed whilepushing control knob to release the boxdown. 10 ft. long. ⅜˝ reinforced jacketaround 3/32˝ control cable. ½˝ threadedmount on control end, plain on other end.2½˝ travel to detent stop, 4˝ total travel.Ideal for truck hoists and other manualcontrol applications. Shpg. 3 lbs.

Gear Pullers

Grip, Long Grip and Reversible Grip Gear Pullers• New, ENERPAC MP series mechanical pullers. Top quality tools with forged steel jawsfor durability and long life. Pullers with 2/3 jaws can be used as regular 3 jaw pullers oras 2 jaw pullers for confined spaces. Reversible grip pullers have a standard grip and aslotted grip for use as a bolt grip puller.Grip Puller Capacity Max. Max. ITEM Model Tons # Jaws Reach Jaw Spread Shpg. Price

14-1097-1-2 MP-12 1 2 2.17˝ 2.76˝ 2 lbs. $9.95 14-1097-1-3 MP-13 1 3 2.17˝ 2.76˝ 2 lbs. $10.95Reversible Grip Puller Capacity Max. Max. ITEM Model Tons # Jaws Reach Jaw Spread Shpg. Price

14-1099-2-2 MPR-22 2 2 2.56˝ 3.15˝ 2 lbs. $10.95

2 Jaw Puller 3 Jaw Puller

154 Miscellaneous www.surpluscenter.com8

NylonTie-DownNet

ITEM 1-2327$4.95• New. 36½˝ x 57˝ cargo net made of 2˝nylon webbing with heavy stitching. Four39¼˝ long galvanized steel bars on 15˝spacing made of ¾˝ square stock rivetedto webbing. 3/16˝ mounting holes in webbingon one side. Shpg. 19 lbs.

Baseboard Heaters• New. Brands may vary (Raywall, Markel). Per-manent mount baseboard electric heater. Idealas primary or auxiliary heat source. Mount onexterior wall of room. Use with external ther-mostat (not included). Thermal overload pro-tection. Can be wired from either end. Neutraltan color. UL listed. Size 7˝ high x 2½˝ deep.

ITEM Voltage Length Watts Shpg. Price 11-2560-3 240/208 AC 3 feet 750/550 12 lbs. $9.99 11-3337-40-T 240/208 AC 40 inches 750/550 13 lbs. $7.99 11-2560-5 240/208 AC 5 feet 1250/950 22 lbs. $16.99 11-2560-6 * 240/208 AC 6 feet 1500/1150 24 lbs. $19.99 11-2560-7 * 240/208 AC 7 feet 1750/1300 31 lbs. $21.99 11-2560-8 * 240/208 AC 8 feet 2000/1500 31 lbs. $24.99 11-2560-10 ** 240/208 AC 10 feet 2500/1875 26 lbs. $35.99* Ships over-size UPS. ** Ships over-size truck freight only.

Drawer Slide Sets

• New, ball bearing drawer slide sets.Use for toolboxes, cabinet drawers,etc. Sold in pairs. Two stage extension(except ITEM 1-2946). Friction detentto hold in closed position. All sectionsare ½˝ wide.

ITEM Travel Capacity Retracted Height Mtg typeDetachable Shpg. Price 1-2946 11⅛˝ 100 lbs. 17⅝˝ 1⅜˝ Tabs Y 3 lbs. $1.95 1-2997 13⅞˝ 75 lbs. 14˝ 1⅞˝ Clips Y 3 lbs. $3.79 1-2670 16¼˝ 75 lbs. 16½˝ 1⅞˝ Clips N 4 lbs. $3.99 1-2689 18˝ 75 lbs. 24˝ 2˝ Holes N 6 lbs. $7.95 1-2927 19˝ – 18˝ 2˝ Brackets N 8 lbs. $12.95 1-2690 19˝ 75 lbs. 24˝ 2˝ Holes N 6 lbs. $8.95 1-2734 20½˝ 75 lbs. 19⅞˝ 2˝ Holes Y 6 lbs. $11.95 1-2907 22˝ 100 lbs. 2111/16˝ 1¾˝ Holes Y 5 lbs. $11.95 1-3396 22¼˝ – 22˝ 1.075˝ Studs N 5 lbs. $9.99

Locking PaddleLatch

ITEM 1-2722$3.99

• New, plated steel paddle latch with lock.Includes two keys. 1˝ from back face ofpanel to front of striker pin.SPECIFICATIONS • Mount four ¼˝-20 x ½ ̋studs• Installation opening on 2¾˝ x 3¼˝ centers2½˝ x 3½˝ x 1⅝˝ deep • Size 43/16˝ x 3⅞˝ x 1⅞˝

• Striker pin travel ½˝ • Shpg. 2 lbs.

Appliance Roller Sets

• New MADICO appliance roller sets. Ad-justable length to accommodate mostbrands and types of appliances. Not to beused with commercial weight appliances.Not recommended for cushioned vinylfloor coverings. Not designed to swivel.

ITEM 1-3461 $8.99SPECIFICATIONS • Pair load cap. 1200 lbs.• Heavy plastic construction• Size 18¾˝ x 2⅞˝ x 1¼˝• Length 18¾˝ to 28˝ • Shpg. 2 lbs.

ITEM 1-3480 $8.99SPECIFICATIONS • Pair load cap. 1200 lbs.• Heavy steel construction • Size 17⅛˝ x 3˝ x 1½˝• Length 16¾˝ to 25˝ • Shpg. 3 lbs.

Linear Guide Rail w/Carriage

ITEM 1-3285$129.99

• New, THOMSON Model 2CA08OME -15146A linear twin guide rail with carriage.Originally designed for spanning, bridginggaps, and to move medium loads with vir-tually frictionless travel. Carriage measures3½˝ x 2⅝˝.SPECIFICATIONS• Travel 19˝ • Carriage mount four 10-32• Rail diameter ½˝ tapped mtg. holes 3 ̋x 2 ̋ctrs.• Dynamic load • Rail mount four bolt holecapacity 290 lbs. on 23⅜˝ x 2˝ ctrs.

• Size 24˝ x 2⅝˝ x 1⅝˝ • Shpg. 6 lbs.

Belt DriveConveyor Rollers

• New, belt drive conveyor rollers with ball bearings in both ends. Metal shafts extendfrom both ends. Belt grooves are ⅜˝ wide.

Groove Center ITEM Roller Size Shafts Grooves to Roller End Shpg. Price 1-2465-A * 1.375˝ x 21½˝ Hex 7/16˝ x ⅝˝ Single 2¼˝ 4 lbs. $3.99 1-2465-B * 1.375˝ x 21½˝ Hex 7/16˝ x ⅝˝ Dual 2¼˝ and 3¼˝ 4 lbs. $3.99 1-2461-U 1.95˝ x 29½˝ Hex 7/16˝ x 7/16˝ and ⅞˝ Dual 2˝ and 3¼˝ 6 lbs. $4.99* Includes internal spring that keeps roller centered ITEM 1-2461-U is rubber coated

Rollers

Plain Knurled

• New. Painted steel construction with ball bearings in both ends. Use for building conveyors,guides, etc. Metal shaft extends from both ends. Knurled rollers have knurling over centerof the roller length and have a serrated area at one end except where noted otherwise.

ITEM Roller Size Shafts Style Shpg. Price

1-2470 1.625˝ x 19¼˝ 12MM x ¾˝ Knurled 4 lbs. $7.99 1-2154-K 1.625˝ x 21⅝˝ 12MM x 15/16˝ Plain 4 lbs. $5.99 1-2154-I 1.9˝ x 2211/16˝ 17MM x 1˝ & ⅝˝ Knurled 9 lbs. $9.99 1-1879 1.9˝ x 23¼˝ 17MM x ⅝˝ and 1˝ Knurled 6 lbs. $9.99 1-2161-Q 1.9˝ x 28˝ 7/16˝ Hex x 9/16˝ Plain 6 lbs. $4.79* Vinyl coated

Hard-Drive MagnetSet

ITEM 1-3258$2.49• Used takeoffs. Plated metal housing withtwo powerful neodymium magnets inside.Originally part of a computer hard-drive.SPECIFICATIONS• Size 2⅞˝ x 2˝ x ¾˝ • Shpg. ½ lbs.

CeramicMagnetITEM 1-1939$2.99• New. Very powerful ceramic magnet. 2¾˝outside diam., 1¼˝ diam. bore. ½˝ thick.Shpg. ¼ lb.

Ceramic RingMagnetITEM 1-350919¢• New, ceramic (ferrite) ring magnet.SPECIFICATIONS • Inside diameter ⅜˝• Pull approx. 1 lb. • Thickness 3/16˝• Outside diameter 1¼˝ • Shpg. 1/10 lb.

Cross HandleControl KnobITEM 1-3578$1.29• New black plastic thread on cross handlecontrol knob.SPECIFICATIONS• Threads onto 5/16-18 • Size 2¼˝ diam. x 1⅛˝• Diameter 2¼˝ • Shpg. ¼ lb.

12 VDC HeatingCoolingDevice

ITEM 1-2335$29.95• New OTE INTERNATIONAL INC. Con -sists of a 12 VDC thermo-electric devicesandwiched between two heatsinks. Whenvoltage is applied one heatsink cools to50° F, the other heatsink heats to 140° Fafter 15 minutes. Changing polarity re-verses the action. Airflow over heatsinksrequired for operation. SPECIFICATIONS• 12 VDC • Small heatsink 4˝ x 4½˝• Amps 3.5 • Large heatsink 5˝ x 5˝• Size 5⅛˝ x 5˝ x 3¾˝ • Shpg. 4 lbs.

3 lb. TensionDevice

ITEM 1-3030$7.95• New, JOHN EVANS SONS INC.traction device. Originally built forthe U.S. government. Green plas-tic housing, vinyl-covered, twistedsteel cable. Swivel snap hook onhousing, swivel snap hook andVelcro loop on cable end.SPECIFICATIONS• Load capacity 3 lbs. • Size 4⅛˝ O.D. x 2⅛˝ thick• Cable lgth. 5 feet • Shpg. 3 lbs.

800-488-3407 Miscellaneous 155&

25 cc PlasticSyringe

ITEM 1-2857 49¢• New, plastic syringe with rubber plungerhead. Perfect for use with grease or glue.SPECIFICATIONS• 25 cc (1.55 cubic inch) • 0.1˝ I.D. nozzleinternal volume • Shpg. 1/10 lb.

WarningPlacardSet

ITEM 1-2843$17.99• New, permanent mount warning placardset for trucks and trailers. Aluminum con-struction with stainless steel spring latches.Contains 15 flip-file warning placards. 10¾˝square. Size 13¾˝ x 13¾˝ x ½˝. Shpg. 5 lbs.PLACARD LEGENDS• OXIDIZER 5.1 • FLAMMABLE SOLID 4• POISON 6 • COMBUSTIBLE 3• DANGEROUS WHEN WET 4 • SPONTANEOUSLY • MISCELLANEOUS HAZARD 9 COMBUSTIBLE 4• NON-FLAMMABLE GAS 2 • FLAMMABLE GAS 2• INHALATION HAZARD 6 • CORROSIVE 8• PG III 6 • FLAMMABLE 3• INHALATION HAZARD 2 • DANGEROUS

Aluminum ElectronicEnclosure

ITEM 1-2483$3.99• New, takeout aluminum electronic enclo-sure. Flat black. Ridges on ends for cool-ing. Two cast threaded standoffs insidemain body.SPECIFICATIONS• Lid 14 countersunk holes• Side 1 four countersunk holes• Side 2 one countersunk hole, two openings for wires• Inside dimensions 3½˝ x 5¼˝ x 1¼˝• Size 4˝ x 6˝ x 1½˝ • Shpg. 1 lb.

ElectricWarmingPlate

ITEM 11-1400 $3.69• Keeps food or liquids warm. Useful inlabs, shops for accurate thermostaticallycontrolled temperatures. Special thermo-glass with three 3˝ diam. circular areas thatmaintain even heat range of 265° to 276°F. ON/OFF is indicated by a neon lamp inpanel. Mount in any simple insulatedframe. Back terminals are uninsulated andmust be enclosed. Use on 115 VAC.Draws 120 watts. Size 10⅜˝ x 5⅜˝ x ½˝.Shpg. 3 lbs.

A/C CondenserITEM 28-1423$29.99• New, BLISS-FIELD. Continuous⅜˝ OD steel tubing,steel fins and frame.450 PSI workingpressure. 9⅞˝ x 11˝ finned area. 5/16˝ ODtube ends for brazed on connections. 3row, 30 passes. Fins 3˝ deep. Approx. 4000to 7600 BTU/hr. at 200 to 800 ft./min. airflow. Shpg. 12 lbs.

3/32˝ Vinyl Coated Cable

ITEM 1-276515¢ per ft.• New, 3/32˝ dia. 7x7 galvanized cable withclear vinyl jacket. Very flexible. 3/16˝ OD. 800lb. breaking strength. Shpg. 8 lbs. per 100 ft.

Screwjack

ITEM 1-3074 $9.95• New, ball screw type screwjack. De-signed to convert rotary motion to linearmotion. Two grease zerks in both swiveleye housings. Retracted length measuredfrom swivel eyes center to center.SPECIFICATIONS • 4 revolutions per 1˝ travel• Travel 5½˝ • Rod end mount swivel-ball• Input gear Pin hole ⅜˝ diam.Gear Type helical • Base end mount swivel-ballOutside diam. 3⅛˝ Pin hole ⅜˝ diam.Gear tooth angle 40° • Size 12˝ x 4˝ x 4˝

• Bearing 2.165˝ O.D. • Shpg. 6 lbs.

Bearing Blockw/Auger

ITEM 1-3302$1.69• New, plated steel block with pulley andauger. Three ball bearings on auger end ofshaft for support, two bearings in steelblock. Auger can be removed to exposeoutput shaft for other applications.SPECIFICATIONS• Shaft 4¼˝ total length5/16˝ dia. x 3½˝ stepped to 7mm dia. x ¾˝

• Pulley 1¼˝ dia. • Mount two ¼˝ holes, ⅞˝ c/cfor ¼˝ round belt • Size 3˝ x 1˝ x 1˝

• Auger 2⅞˝ dia. x 1½˝ • Shpg. 2 lbs.

Ball TransferStudITEM 1-3501$2.99• New, plated carbon steel ball with platedsteel housing.SPECIFICATIONS• Ball diam. 1˝ • Mounting height 1½˝• Load capacity 75 lbs. • Size 1¼˝ diam. x 1½˝• Mtg. ¼˝-20 x ⅝˝ stem • Shpg. ¼ lb.

115 VAC Portable SprinklerTransfer

WaterPump

ITEM 2-1384$94.95

• New, DIAMOND Model 312233-01portable utility / transfer water pump. Idealfor boosting pressure to wash cars, boatsand equipment or for lawn-sprinkling up to30 PSI. Continuous duty, TEFC motor withauto-reset thermal protection and built-in,protected ON/OFF switch. Six foot powercord with 3-prong plug. Convenient carry-ing handle. Includes owners manual andtwo 1˝ BSPM-to-¾˝ male garden hoseadapters with gaskets.SPECIFICATIONS • Flow at 30 PSI discharge• Voltage 115 VAC, 60 HZ 6.1 GPM at 5 ft. of lift• Amperage 7 Amps 5.1 GPM at 10 ft. of lift• Power ½ HP 4.2 GPM at 15 ft. of lift• Pressure 51 PSI shutoff 3.9 GPM at 20 ft. of lift• Ports 1˝ BSPM w/ 3.0 GPM at 25 ft. of lift¾˝ garden hose adapters • Size 13¾˝ x 8¾˝ x 10˝

• Max flow rate 9.3 GPM • Shpg. 18 lbs.

1 HP, 600 GPHSprinkler/BoosterPump

ITEM 2-1378 $149.99• New, SIMER 2825SS stainless steelsprinkler booster pump. Ideal for boostingpressure to clean equipment, lawn sprin-kling and other water transfer applications.Use with multiple lawn sprinklers pumpingfrom lakes, streams or ponds. Features in-clude stainless steel pump housing for cor-rosion resistance, TEFC motor enclosure,six foot power cord and carrying handle foreasy portability. Includes two ¾˝ male gar-den hose adapters.SPECIFICATIONS • Max lift 25 ft.• Voltage 115 VAC • Flow rates• Amperage 9.8 Amps 10 GPM at 0 PSI• Power 1 HP 8 GPM at 20 PSI• Pressure 80 PSI max. 6 GPM at 50 PSI• Suction port 1˝ BPT • Size 14¾˝ x 8½˝ x 10¼˝• Discharge port 1˝ BPT • Shpg. 24 lbs.

115 VAC Stainless SteelPortable UtilitySprinklerPump

ITEM 2-1382 $149.99• New, WATERACE Model R100U portableutility / transfer water pump. Ideal for boost-ing pressure to wash cars, boats and equip-ment or for lawn-sprinkling. Can be used asa shallow-well jet pump (25 feet max depth).Continuous duty, TEFC motor with auto-reset thermal protection and six-foot powercord with 3-prong plug. Convenient carry-ing handle. Stainless steel pump housing.Includes owners manual and two 1˝ BSPM-to-¾˝ male garden hose adapters.SPECIFICATIONS• Voltage 115 VAC, 60 HZ • Power 1 HP• Amperage 9.8 Amps • Pressure 80 PSI max.• Max flow 8.9 GPM at 10 PSI & 0 ft. lift• Ports 1˝ BSPM w/ ¾˝ garden hose adapters• Mount four ⅜˝ holes on 6⅜˝ x 5½˝ centers• Size 14⅝˝ x 9¼˝ x 10½˝ • Shpg. 22 lbs.

Waste OilTransferPumps

• Brand new SCC. Flexible impeller typepump designed for pumping used motoroil. Ideal also for water transfer and similarliquids. Bronze head. Self-priming. Not forpumping flammable fuels.SPECIFICATIONS • Ports IN ⅜˝ NPTF,• 6 GPM open flow OUT ¾˝garden hose thread M• 4 GPM at 10 PSI • Size 6˝ x 4˝ x 3¼˝• 18 PSI max. • Shpg. 8 lbs.

ITEM 2-1185 $90.95• 115 VAC, 2 amps.

ITEM 2-1186 $79.95• 12 VDC, 10 amps.

ITEM 2-1185-Kit $11.50• Repair kit includes impeller, seals, re-tainer and cover gasket. Shpg. ½ lb.

ITEM 2-1185-I $6.95• Impeller only. Shpg. 2 oz.

115/230 VAC Shallow WellJet PumpWith PressureSwitch

ITEM 2-1381$119.99• New, WATERACE Model RTS5 shallowwell jet pump with pressure switch. For pri-vate well applications up to 25 feet depth towater. Ideal for low flow sprinkler systems.Cast iron pump housing. Cont inuous duty,TEFC motor with auto-reset thermal protec-tion and voltage selection switch. Adjustablepressure switch set to turn ON/OFF at 30/50PSI, 10 PSI minimum ON, 65 PSI max OFF,differential 20-30 PSI.SPECIFICATIONS• Voltage 115/230 VAC, 60 HZ • Flow at 30 PSI discharge• Amperage 8.4/4.2 Amps 9 GPM at 0 ft. of lift• Power ½ HP 8 GPM at 5 ft. of lift• Pressure 65 PSI shutoff 7.5 GPM at 10 ft. of lift• Ports 1¼˝ PVC suction, 6 GPM at 15 ft. of lift1˝ PVC discharge 4.5 GPM at 20 ft. of lift

• Max flow rate 9 GPM 3 GPM at 25 ft. of lift• Mount two bolts on • Size 16¾˝ x 8¾˝ x 8⅛˝5¼˝ or 57/16˝ centers • Shpg. 41 lbs.

115/230 VAC Cast IronLawn Sprinkler

Pump

ITEM 2-1380$119.99

• New, WATERACE Model R7L sprinklerpump. Cast iron pump housing. Cont -inuous duty, ODP motor with auto-resetthermal protection and voltage selectionswitch. Indoor use only.SPECIFICATIONS • Flow 42 GPM at 10 ft lift• Voltage & 15 PSI discharge115/230 VAC, 60 HZ • Ports 1½˝ NPT

• Amperage • Mount two bolts on14.8/7.4 Amps full load 53/16˝ centers

• Power ¾ HP • Size 17½˝ x 9½˝ x 10½˝• Pressure 45 PSI shutoff • Shpg. 57 lbs.

156 AC Centrifugal Pumps www.surpluscenter.com8

Hot WaterCirculatorPumps

• Brand new LITTLE GIANT. Magneticdrive pumps made for hot water circula-tion. Bronze pump body with Ryton im-peller. Ports ½˝ NPT. Max. system pressure150 PSI. Max. liquid temp. 212° F.

ITEM 2-1166 $169.95• 115 VAC, 1550 RPM motor. 0.43 amps.180 GPH at 1 ft. head. Max. head 4 ft. Size5˝ x 6⅝˝ x 5˝. Shpg. 6 lbs.

ITEM 2-1167 $184.95• 115 VAC, 3000 RPM motor. 1.2 amps.372 GPH at 1 ft. head. Max. head 12 ft.Size 3⅜˝ x 7⅞˝ x 5˝. Shpg. 7 lbs.

Flexible PolyurethaneImpeller PumpITEM 2-1379$89.95

• Brand new, SCC PUMPS Model DC-206-40 flexible impeller pump. Special high ten-sile strength polyurethane impeller. Ideal forwater transfer and similar liquids. Bronzepump body. Permanent magnet motor.Self-priming to ten feet when pumpingwater. Not for pumping flammable liquids.Pre-wired with 10˝ leads.SPECIFICATIONS • Mnt. 4 holes, 3⅜˝ x 1⅞˝• Voltage 12 VDC • Duty intermittent• Current 10 Amps • Fluid temp. range 40-140°F• Pressure 18 PSI max • 50 wt. max viscosity• Ports ¾˝ M garden hose • Size 6¼˝ X 4˝ x 3¼˝w/internal ⅜˝ NPTF • Shpg. 8 lbs.

Flow Rate (GPH) vs. Pressure Head (Feet) For Pumping WaterPressure 1´ 5´ 10´ 15´ 20´ 30´ 40´ Shut-OffFlow (GPH) 385 375 342 312 273 192 85 42

¾ HP Deep WellCast IronPumpWith 2˝Ejector

ITEM 2-1247-A $139.95• New, GENERAL PUMP ModelSGC1200711. Self-priming deep well castiron centrifugal pump. Made in Italy.SPECIFICATIONS • PSI 50 max.• HP ¾ • Temp. range 5° - 122° F• Voltage 115 AC, 60 Hz • IN/OUT 1¼˝/1˝ NPT• Single phase • Plastic impeller• RPM 3400 • Shpg. 44 lbs.• GPM 7.3 at 82 ft. head & 30 ft. suction depth max.• GPM 1.1 at 115 ft. head & 49 ft. suction depth min.

10 HP, 3 Ph. CentrifugalPump

ITEM 2-1383 $799.99• New, DAYTON Model 4ZA47A centrifugalpump. Naval bronze construction. TEFCmotor, 3500 RPM, 215JM frame. Carbonceramic shaft seal.SPECIFICATIONS • Inlet port 3˝ NPT• Flow • Outlet port 2½˝ NPT428 GPM at 50 ft. head • Power 10 HP 3 phase165 GPM at 110 ft. head • Voltage 230/460 VAC293 GPM at 92 ft. head • Current 26.8/12.8 amps(peak efficiency) • Size 24˝ x 15˝ x 14˝

• Pressure 48.3 psi max. • Shpg. 175 lbs.Truck freight only.

Inline CirculatorPump

ITEM 2-1342$14.95

• New, LITTLE GIANT Model 1-AA-OM in-line pump. Open, fan cooled motor. In-tended for use with fountains or freshwater dispensers. Nylon pump head. Alu-minum mounting bracket.SPECIFICATIONS• Voltage 115 VAC • Performance (GPH at head)• Power 1/200 HP 110 GPH at 1 ft. head• Amps 0.5 85 GPH at 3 ft. head• Flow 1 GPM 55 GPH at 5 ft. head• Max. int. liquid temp. 120° F • Base mount• Intake port 2 bolt holes on 3¼˝ ctrs.½˝ NPTM & ¼˝ NPTF • Size 3½˝ x 4˝ x 4˝

• Discharge port ¼˝ NPTM • Shpg. 2 lbs.

ITEM 2-1342-A $14.95• Same as ITEM 2-1342 except 230 VAC,0.3 amps.

800-488-3407 Centrifugal Pumps 157&

1½ / 0.19 HP 2 SpeedSpaPump

ITEM 2-1271-B $189.95• New, STA-RITE Model DJAYEA-0162A.Plastic pump housing.SPECIFICATIONS• Pump: • Pump motor:2˝ male union ports 115 VAC138 GPM at 12 ft./ HP 1.0/0.1660 GPM at 5 ft. max. RPM 3450/172550 ft./12 ft. head at 0 GPM max. Amps 10.4/3.624˝ long, 4 wire power cord Continuous duty

• Auto-reset thermal protect. • Size 15⅝˝ x 6½˝ x 8¾˝• 4 bolt base mnt 3˝ x 5˝ ctrs. • Shpg. 27 lbs.

1 HP PoolPumpw/Strainer

ITEM 2-1357 $159.95• New, FLOTECH Model FPC6131 aboveground pool pump. For pools up to 24,000gallon. Debris trap with clear lid. Threeprong 25 foot power cord.SPECIFICATIONS • Flow rate• Power 1 HP 52 GPM at 25 ft. head• Voltage 115 VAC 45 GPM at 30 ft. head• Max. load amps 12 amps 37 GPM at 35 ft. head• Inlet port 1½˝ NPT 27 GPM at 40 ft. head• Outlet port 1½˝ NPT 12 GPM at 45 ft. head• Size 21˝ x 6⅜˝ x 9¾˝ • Shpg. 25 lbs.

2½ HP, 230 VACSpaPump

ITEM 2-1303 $199.95• New, STA-RITE Model DJAAGB-0151spa pump. Plastic pump housing.SPECIFICATIONSPump motor: Pump:• 230 VAC • 60 ft. head at 0 GPM max.• HP 2½ • 210 GPM at 35 ft. head max.• 3450 RPM • 2˝ male union ports• 11.1 amps • 54˝ long, 3 wire power cord• Continuous duty • Four bolt base mount• Auto-reset thermal protect. on 3˝ x 5˝ centers• Size 17˝ x 6¾˝ x 8¾˝ • Shpg. 36 lbs.

Magnetic DriveChemicalPump

ITEM 2-1075 $135.95• Brand new LITTLE GIANT 2-MD pump.Magnetic drive eliminates shaft seal for re-duced wear and maintenance. Poly pro -pylene pump housing handles lowconcentrate acids. Max. fluid temp. 150° F.Also makes excellent circulation pump.SPECIFICATIONS • 5½ GPM at 9 ft. head• 115 VAC • Max. head 14½ ft.• 1.5 amps • IN ½˝ NPT• 3100 RPM • OUT ½˝ NPT• Magnetic drive • Size 8½˝ x 4˝ x 4½˝• Max. temp. 150° F • Shpg. 4 lbs.

7.5 HP Double CentrifugalPump

ITEM 2-1355 $199.99• New, BYRON JACKSON double centrifu-gal pump with General Electric motor. Castiron construction. Crane type 6 seals onpump shafts.SPECIFICATIONS• Pump 1 • Pump 2Flow 110 GPM Flow 6 GPMPressure 70 PSI max. Pressure 20 PSI max.Ports 1½˝ NPT Ports ¾˝ NPT

• Power 7.5 HP, 3 phase• Voltage 220/440 VAC • Size 26˝ x 15˝ x 12˝• Current 19.6/9.8 amps • Shpg. 250 lbs.

Truck freight only.

7.5 HP Double CentrifugalPump

ITEM 2-1355-A $149.99• New, AURORA double centrifugal pumpwith Marathon motor. Cast iron construc-tion. Crane type 6 seals on pump shafts.SPECIFICATIONS• Pump 1 • Pump 2Flow 110 GPM Flow 6 GPMPressure 70 PSI max. Pressure 20 PSI max.Ports 1¼˝ NPT Ports ¾˝ NPT

• Power 7.5 HP, 3 phase• Voltage 220/440 VAC • Size 27½˝ x 14 ˝ x 10½˝• Current 20/10 amps • Shpg. 225 lbs.

Truck freight only.

¾ HP 115 VAC WaterPump

ITEM 2-1293 $159.95• New, Diamond by GSW Model SJC75.Shallow well jet pump for well depths upto 25 ft. or to draw from ponds. Ideal forpressure boost or sprinkler systems. Castiron housing with plastic impeller. Ther-mally protected. Includes foot valve and100 PSI gauge and pressure switch.SPECIFICATIONS• HP ¾ • Inlet 1¼˝ NPT• 115/230 VAC • Outlet 1˝ NPT• Amps 10/5 • Size 16½˝ x 9¼˝ x 8¼˝• 3400 RPM ODP motor • Shpg. 43 lbs.

Discharge Flow Rates (GPM) at Pumping Depths Pressure 5 ft. 10 ft. 15 ft. 20 ft. 25 ft. 20 PSI 17.6 15.7 13.3 11.6 9.2 30 PSI 16.5 14.8 12.9 11.2 8.9 40 PSI 14.8 13.3 11.4 9.9 7.5


24 VDC CoolantPumpITEM 2-1224$39.99• New, Southside Machine CompanyModel C72-2848. Originally built to pumpanti-freeze. Motor has ball bearings. Polar-ized, two-pin electrical connection.SPECIFICATIONS• Voltage 24 VDC • Ports ¼˝ NPT• Amperage 3.3 • Size 6⅛˝ x 3⅝˝ x 3½˝• Flow 80 GPH at 2 PSI • Shpg. 7 lbs.

272 GPM, 6.5 HPEngine-DrivenTrashPump

ITEM 2-1340 $478.95• Brand new, HYPRO Model 1543A-TSP.Self-priming aluminum body trash pump.Pump front cover is easily taken off to re-move any debris. Aluminum impeller canhandle solid particles in suspension up to 1˝dia. EPDM mechanical seal and inlet valve.Hose barb and strainer for inlet hose sup-plied (hose not included). Steel roll cage.SPECIFICATIONS• 6.5 HP • Max head 106 ft. (46 PSI)• PowerPro OHV gas engine • Max. suction lift 23 ft.• Pump performance: • Self-priming272 GPM @ 12 ́head (5 PSI) • 3˝ BPT ports179 GPM @ 58́ head (25 PSI) • Size 23˝ x 18˝ x 18˝50 GPM @ 93 ́head (40 PSI) • Shpg. 98 lbs.

12 VDC CentrifugalPump

ITEM 2-1155$193.95• Brand new HYPRO “Aqua-Tiger”.Bronze centrifugal pump. Use for agchemical transfer, live well aeration, circu-lation, etc. Permanent magnet motor. Notself-priming.SPECIFICATIONS • 140° F max.• 12 VDC, 5.5 amps • Ports ¾˝ NPT• Max. flow 19 GPM • Size 7˝ x 4½˝ x 4˝• Max. 7 PSI • Shpg. 8 lbs.

Extra High VolumeCentrifugalPump

ITEM 2-1142$362.95• Brand new, HYPRO Model 9206C castiron centrifugal pump. Pedestal mount, di-rect drive. Nylon impeller. Large flow capac-ity satisfies the demands of bigger sprayersallowing wider coverage with each pass.SPECIFICATIONS • Shaft ⅝˝ diam. x 1¾˝• 225 GPM max. flow w/keyway• 80 PSI max. • Inlet 2˝ NPT• 4200 RPM max. • Outlet 1½˝ NPT• 140° F temp max. • Size 8˝ x 8¾˝ x 8¼˝• CCW rotation • Shpg. 28 lbs.

Performance Chart PSI 20 50 80 RPM GPM HP GPM HP GPM HP 2400 114 2.0 3600 225 7.1 143 6.1 4200 225 9.4 225 11.3 80 6.4

Simer WaterPumps

• New, SIMER. Flex -ible impeller pump.

Use to pump water, brine so-lutions and light lubricating oils.

WARNING: This pump should never be usedto pump flammable fluids! Wired with a 4 ft.power cord with on/off switch and alligatorclips. Permanent magnet motor. Includestwo garden hose to ½˝ hosebarb adaptersand instructions.SPECIFICATIONS FOR BOTH• Self-priming to 9 feet • Male garden hose thread ports• Two hour run time max. • Base mount

ITEM 2-1261 $49.95SPECIFICATIONS• Model EBW50 • 20 PSI max.• 1140 liters/hour (301 GPH) • Size 7⅛˝ x 4½˝ x 4½˝• 12 VDC • Shpg. 7 lbs.

ITEM 2-1263 $59.95SPECIFICATIONS • 20 PSI max.• Model EBW85 • No adapters• 1950 liters/hour (515 GPH) • Size 7⅝˝ x 4½˝ x 4½˝• 12 VDC • Shpg. 8 lbs.

158 Centrifugal Pumps & Transfer Pumps www.surpluscenter.com8

Hydraulic DrivenCentrifugalPump

ITEM 2-1180$607.95• Brand new HYPRO Model 9303-HM1C.Cast iron centrifugal pump with direct drivehydraulic motor. Power from tractor hyd rau -lic circuit leaving PTO free for other uses.SPECIFICATIONS• Max. pressure 120 PSI • 140° F max. fluid temp• Max. pump flow 112 GPM • Hydraulic requirements• Pump inlet 1½˝ NPT 13 GPM at 2000 PSI• Pump discharge 1¼˝ NPT • Size 11˝ x 7¾˝ x 8¼˝• Hyd. motor ports ½˝ NPT • Shpg. 31 lbs.

High PressureCentrifugalPump

ITEM 2-1222$276.95• Brand new HYPRO 9203-C. Cast ironpedestal pump. Provides high volume andhigh pressure. Viton seal.SPECIFICATIONS • Shaft ⅝˝ diam. x 2⅛˝• GPM 136 max. w/keyway• PSI 180 max. • Inlet 1½˝ NPT• RPM 6000 max. • Outlet 1¼˝ NPT• Temp. 140° max. • Size 7¼˝ x 8¼˝ x 6¾˝• Rotation CCW • Shpg. 21 lbs.

Performance ChartNote: HP shown is for electric motor; double for gas engines.

PSI 40 60 120 160 RPM GPM HP GPM HP GPM HP GPM HP 3600 90 3.9 34 2.5 – – – – 4200 115 6.5 93 5.9 – – – – 5000 134 10.7 130 10.6 41 6.6 – – 6000 136 15.1 134 15.4 120 16.2 86 14.0

6.5 HP Engine-DrivenWaterPump

ITEM 2-1326 $300.95• Brand new HYPRO 1542P-5SP. Self-priming polypropylene centrifugal pump toprovide high-capacity liquid transfer formany applications. Use for transferringwater, liquid fertilizers and herbicides in-cluding Roundup and Atrazine and otherchemicals compatible with pump materi-als. Self-priming also makes it ideal forlawn and garden watering, tank filling andfloodwater removal when used with astrainer and foot valve (not included).Nylon impeller can handle solid particles insuspension up to ⅜˝ diameter. EPDM me-chanical seal and inlet valve.SPECIFICATIONS • HP 6.5• Pump performance: 200 GPM at 0 ft. head (0 PSI)150 GPM at 58 ft. head (25 PSI), 65 GPM at 115 ft. head (50 PSI)

• PowerPro OHV gas engine • Ports 2˝ NPT• Max head 134 ft. (58 PSI) • Four bolt base mount• Max. suction lift 25 ft. • Size 19˝ x 15˝ x 13˝• Self-priming • Shpg. 54 lbs.

Engine-DrivenWater Pumps

• Brand new, HYPRO. Self-priming, alu-minum centrifugal pumps. Use for transfer-ring water, tank filling and flood waterremoval. Aluminum impeller can handle solidparticles in suspension up to ⅜˝ diameter.EPDM mechanical seal and inlet valve. Hosebarb port adapters and strainer for inlet hosesupplied (hose not included). Steel roll cage.

5.5 HPITEM 2-1338$277.95SPECIFICATIONS• Model 1542A-SP• PowerPro OHV gas engine • 5.5 HP• Pump performance: • Max. suction lift 23´147 GPM @ 12´ head (5 PSI) • Self-priming110 GPM @ 58´ head (25 PSI) • 2˝ BPT ports57 GPM @ 93´ head (40 PSI) • Size 16˝ x 15˝ x 15˝Max head 113´ (49 PSI) • Shpg. 60 lbs.

6.5 HPITEM 2-1339$285.95SPECIFICATIONS• Model 1543A-SP• PowerPro OHV gas engine • 6.5 HP• Pump performance: • Max. suction lift 23´252 GPM @ 23´ head (10 PSI) • Self-priming190 GPM @ 58´ head (25 PSI) • 3˝ BPT ports99 GPM @ 93´ head (40 PSI) • Size 20˝ x 16˝ x 18˝Max head 118´ (51 PSI) • Shpg. 75 lbs.


12 VDC DiaphragmPumpAuto-Demand

ITEM 2-1360$84.95• Brand new, SHURFLO Model 8000-543-236 automatic demand diaphragm pump.Ideal for spot sprayers. Santoprene di-aphragm and Viton valves. Automatic shutoff set to 60 PSI. Pump turns on between15 and 20 PSI less than shut off pressure.Self priming to 8 ft. Can run dry intermit-tently without damage. Wire leads. Rubbervibration damper mounting feet. Metal fit-tings or rigid pipe are not recommendedfor plumbing.SPECIFICATIONS• Voltage 12 VDC • Pressure 50 PSI max.• Amperage 6.4 Amps • Ports ⅜˝ NPT• Flow rates • Duty intermittent1.8 GPM at open flow • Mount 4 bolt on1.47 GPM at 30 PSI 33/16˝ x 2¼˝ ctrs.1.41 GPM at 40 PSI • Size 8¼˝ x 4˝ x 4½˝1.36 GPM at 50 PSI • Shpg. 6 lbs.

DiaphragmPumps

Auto-Demand• Brand new, SHURFLO automatic de-mand diaphragm pumps. Ideal for spotsprayers, bulk transfer, fertilizer drip appli-cations. Santoprene diaphragm and Vitonvalves. Automatic shut off set to 45 PSI.Pump turns on between 15 and 20 PSIless than shut off pressure. Self priming to12 ft. Can run dry intermittently withoutdamage. Rubber vibration damper mount-ing feet. Metal fittings or rigid pipe are notrecommended for plumbing.

115 VACITEM 2-1363 $151.95SPECIFICATIONS• Model 2088-394-144 • Grounded 6 ft. power cord• Voltage 115 VAC • Pressure 40 PSI Max.• Amperage 0.9 Amps • Ports ½˝ MSPT• Flow rates (male straight pipe thread)3.0 GPM at open flow • Duty intermittent2.4 GPM at 10 PSI • Mount 4 bolt on2.2 GPM at 20 PSI 3⅛˝ x 2¼˝ ctrs.1.9 GPM at 30 PSI • Size 9˝ x 5¼˝ x 4⅞˝1.6 GPM at 40 PSI • Shpg. 6 lbs.

12 VDCITEM 2-1362 $99.95SPECIFICATIONS• Model 2088-343-135 • Wire leads• Voltage 12 VDC • Pressure 40 PSI Max.• Amperage 7.7 Amps • Ports ½˝ MSPT• Flow rates (male straight pipe thread)3.0 GPM at open flow • Duty intermittent2.8 GPM at 10 PSI • Mount 4 bolt on2.69 GPM at 20 PSI 3⅛˝ x 2¼˝ ctrs.2.36 GPM at 30 PSI • Size 8¾˝ x 6˝ x 4½˝2.05 GPM at 40 PSI • Shpg. 6 lbs.

800-488-3407 Diaphragm & Piston Pumps 159&

12 VDC DiaphragmPumpAuto-Demand

ITEM 2-1361 $49.95• Brand new, SHURFLO Model SLV10-AA41 automatic demand diaphragmpump. Ideal for spot sprayers. Santoprenediaphragm and Viton valves. Automaticshut off set to 40 PSI. Pump turns on at 25PSI. Self priming to 2½ ft. Can run dry in-termittently without damage. Wire leads.Rubber vibration damper mounting feet.SPECIFICATIONS• Voltage 12 VDC• Amperage 4 Amps • Pressure 50 PSI max.• Flow rates • Ports ⅜˝ hosebarb1 GPM at open flow • Duty intermittent0.9 GPM at 3 PSI • Mount four bolt on0.73 GPM at 10 PSI 3¼˝ x 2¼˝ centers0.62 GPM at 20 PSI • Size 7˝ x 3⅝˝ x 2⅜˝0.49 GPM at 30 PSI • Shpg. 3 lbs.

1½˝ x 100´ SuctionHoseITEM 20-1194$89.99• New. PVC suction hose. Flexible, won’tcollapse. 1½˝ ID x 100 ft. roll. Shpg. 44 lbs.

HyproBig TwinPumps• Brand new. Highvolume two cylin-der piston pumps.used in a variety ofspraying and clean-ing applications.Fur nished withleather cups for herbicide andinsecticide use.SPECIFICATIONS • Shaft 1˝ diam. w/keyway• 400 PSI max. • Reversible• Ports ¾˝ NPT • Size 6¾˝ x 7½˝ x 6¼˝• 140° F max. temp. • Shpg. 19 lbs.

ITEM 2-1120 $447.95• Model 5206C. 6 GPM at 800 RPM max.

ITEM 2-1121 $447.95• Model 5210C. 10 GPM at 600 RPM max.

Performance Chart ITEM 2-1120 ITEM 2-1121 100 PSI 400 PSI 100 PSI 400 PSI GPM HP GPM HP GPM HP GPM HP540 RPM 5.4 0.50 5.3 1.5 9.4 0.94 9.2 2.7800 RPM 7.9 0.74 7.7 2.2 9.9 1.10 9.8 3.0

3 GPM PistonPumps• Brand new.Handles variousspraying, washingand high pres sureapplications. Forhydrostatic test-ing, pressure in -jecting and other highpressure low volumeapplications.SPECIFICATIONS • Reversible• Model C-5330 • Sealed ball bearings• 3 GPM at 500 PSI • Replaceable cyl. sleeves• Max. 500 PSI • Stainless steel valves• Max. 1800 RPM • Size 6˝ x 5˝ x 5˝• Ports ½˝ NPT • Shpg. 12 lbs.

ITEM 245 $255.95• ⅝˝ hollow shaft. Mounts directly overmotor shaft.ITEM 245-A $255.95• ⅝˝ solid shaft. Use w/ couplings or beltand pulley.ITEM 245-B $329.95• Same as ITEM 245 above with ad justablesoap injector. Shpg. 13 lbs. PSI RPM 0 50 100 200 300 400 500 900 ¼ ¼ ¼ ¼ ⅓ ½ ½ 1200 ¼ ¼ ¼ ⅓ ½ ½ ¾ 1800 ¼ ⅓ ½ ½ ½ 1 1

Listed in required HP.

Hypro 5300 Series Repair Kits

ITEM 3430-0009 $9.95• Piston stack kit. Shpg. 1 lb.

ITEM 3430-0197 $24.95• Valve kit (4 valves). Shpg. 1 lb.

ShurfloHosebarb toPipe Fittings

• Brand new Shurflo polypropylene hosebarb to pipe fittings.ITEM Style Description Hose ID Fitting Shpg. Price

2-1366 A Straight hosebarb ⅜˝ ½˝ NPTF Swivel ¼ lb. 99¢2-1367 A Straight hosebarb ½˝ ½˝ NPTF Swivel ¼ lb. 99¢2-1364 A Straight hosebarb ⅝˝ ½˝ NPTF Swivel ¼ lb. 99¢2-1365 A Straight hosebarb ¾˝ ½˝ NPTF Swivel ¼ lb. 99¢2-1369 B Elbow hosebarb ⅜˝ ½˝ NPTF Swivel ¼ lb. 99¢2-1368 B Elbow hosebarb ½˝ ½˝ NPTF Swivel ¼ lb. 99¢2-1371 B Elbow hosebarb ⅝˝ ½˝ NPTF Swivel ¼ lb. 99¢2-1370 B Elbow hosebarb ¾˝ ½˝ NPTF Swivel ¼ lb. 99¢2-1372 C Straight hosebarb ⅜˝ ⅜˝ NPTM ¼ lb. 50¢2-1373 C Straight hosebarb ½˝ ⅜˝ NPTM ¼ lb. 50¢2-1374 C Straight hosebarb ½˝ ½˝ NPTM ¼ lb. 50¢2-1375 D Elbow hosebarb ⅜˝ ⅜˝ NPTM ¼ lb. 55¢

A B C D

8160 Roller Spray Pumps www.surpluscenter.com

High VolumeRollerPump

ITEM 2-1215$363.95

• Brand new HYPRO Model 1502C. Sixroller pump delivers high volume at lowRPM. Cast iron body. Buna-N- seals.SPECIFICATIONS • Ports 1½˝ NPT• 33 GPM at 540 RPM • Max. fluid temp. 140° F62 GPM at 1000 RPM • Rotation CCW

• PSI 150 max. • Shaft 15/16˝ diam.• RPM 1000 max. • Shpg. 28 lbs.

12 Volt RollerPump

ITEM 2-1056 $417.95• Brand new HYPRO. Use for a variety ofagricultural spraying applications in or-chards, feedlots, chemical transfer. Alsofor tractor mounting for herbicide bandingand nitrogen side-dressing.SPECIFICATIONS • Max. 30 amps• 4 roller pump • Viton seals• Self priming to 3 ft. • Polypropylene rollers• 35 PSI cont. • Ni-Resist pump body50 PSI int. • Ports ¾˝ NPT

• 7 GPM • Size 12˝ x 6˝ x 6˝• 12 VDC • Shpg. 16 lbs.

ChemicalSprayRollerPumps

• Brand new. Many industrial, marine, hor-ticultural, agricultural uses. For weed andinsect control. Handles wettable powders,light oils, aromatic solvents, etc.SPECIFICATIONS • 150 PSI• Ports ¾˝ NPT • Self-priming to 3 ft.• Lift to 22 ft. (primed) • Ball bearings• CW • Positive displ.• Stainless steel shaft • Size 5¼˝ x 4⅜˝ x 3˝⅝˝ diam. x 1⅜˝ • Shpg. 6 lbs.

ITEM 222 $196.95• Use w/electric motor. Model 4001N, Ni-Resist. Max. 1800 RPM.

ITEM 224 $189.95• Use w/gas motor. Model 4101N, Ni-Re-sist. Max. 2600 RPM.

ITEM 2-1077 $283.95• Model 410/XL Silvercast. ITEM 222 ITEM 224 & 2-1077 1100 RPM 1800 RPM 1800 RPM 2600 RPM PSI GPM HP GPM HP GPM HP GPM HP 0 5.5 ¼ 9.1 ¼ 5.0 ¼ 7.2 ¼ 50 4.4 ¼ 8.0 ½ 4.5 ⅓ 6.6 ½ 100 3.8 ½ 7.3 1 3.9 ¾ 6.0 1 150 3.3 ¾ 6.7 1¼ 3.4 1 5.4 1¼

Disassemble and reverse rotor for reverse rotation.

22 GPM,7 RollerPumps

Cast IronITEM 268-CP $152.95Ni-ResistITEM 268-NP $296.95SilvercastITEM 268-SP $446.95SPECIFICATIONS• 22.4 GPM • Stainless steel shaft• 200 PSI 15/16˝ diam. x 21/16˝• 850 RPM • Replaceable nylon rollers• Ports ¾˝ NPT • Replaceable seals• CCW • Size 6⅞˝ x 6⅝˝ x 6˝• Ball bearings • Shpg. 18 lbs.

PERFORMANCE TABLESPEED 0 PSI 100 PSI 200 PSI RPM GPM HP GPM HP GPM HP 450 12.5 ¼ 10 ½ 9 1 550 15 ¼ 12.8 ¾ 11.4 1¼ 750 20 ⅓ 17.8 1 16.4 1½ 850 22.4 ½ 20.6 1¼ 19.1 1¾18 GPM,

8 RollerPumps

Cast IronITEM 267-CP $149.95Ni-ResistITEM 267-NP $296.95SilvercastITEM 267-SP $436.95SPECIFICATIONS• 18.3 GPM • Stainless steel shaft• 300 PSI 15/16˝ diam. x 2˝• 850 RPM • Replaceable nylon rollers• Ports ¾˝ NPT • Replaceable seals• CCW • Size 6¾˝ x 6½˝ x 6½˝• Ball bearings • Shpg. 18 lbs.

PERFORMANCE TABLESPEED 0 PSI 100 PSI 300 PSI RPM GPM HP GPM HP GPM HP 450 10.0 ¼ 8.6 1 5.8 2½ 550 12.0 ¼ 10.6 1¼ 8.0 3 750 16.3 ½ 14.9 1½ 12.2 4 850 18.3 ½ 16.9 1½ 14.2 4½

20 GPM,6 RollerPumps

Cast IronITEM 278-CP $114.95Ni-ResistITEM 278-NP $260.95SilvercastITEM 2-1078-SP $366.95SPECIFICATIONS• 19.5 GPM • Shaft ⅝˝ diam. x 1½˝• 300 PSI • Ball bearings• 400 to 1200 RPM • Replaceable rollers, seals• Ports ¾˝ NPT • Size 6˝ x 5¾˝ x 2½˝• CCW • Shpg. 12 lbs.

PERFORMANCE TABLESPEED 0 PSI 100 PSI 300 PSI RPM GPM HP GPM HP GPM HP 540 9.1 0.21 6.5 0.81 3.3 2.10 800 13.3 0.32 11.2 1.13 7.9 2.98 1000 16.5 0.50 14.4 1.44 11.3 3.74 1200 19.5 0.69 17.3 1.80 14.1 4.51

Roller PumpQuickCouplers• Brand new. Use to connect Hypro rollerpumps to standard tractor 1⅜˝ 6 spline 540RPM PTO shafts. Die cast constructionwith quick release collar.

ITEM 1321-0006 $25.95• Fits onto ⅝˝ pump shafts (6 rollerpumps). Shpg. 4 lbs.

ITEM 1321-0007 $27.95• Fits onto 15/16˝ pump shafts (7 & 8 rollerpumps). Shpg. 4 lbs.

Steel ShaftCouplers• Solid steel shaft couplers with four setscrews instead of keyway. Shpg. 2 lbs.

ITEM 1320-0015 ⅝˝ to ¾˝ $21.95ITEM 1320-0016 ⅝˝ to ⅝˝ $20.95

ReplacementRoller Kits

• Brand new. Consists of proper numberof Hypro Super Rollers to bring pump backto peak performance.

ITEM 3430-0581 $19.95• For 4000 series 4 roller pumps. Shpg. 1 lb.

ITEM 3430-0582 $22.95• For 6000 series 6 roller pumps. Shpg. 1 lb.

ITEM 3430-0583 $32.95• For 7000 series 7 or 8 roller pumps.Shpg. 1½ lbs.

Tractor Spray Pumps• Brand new. Hypro roller pumps give high volume and pressure for all types of agri-cultural spraying. Low speed models for use with tractor PTO as well as higher speedversions for electric motor or gas engine driven applications. Rotation can be reversedby disassembling and changing rotor orientation thru housing). All have Super Rollerswhich are compatible with a wide variety of chemicals. 3 different body materials.• Cast Iron for general purpose spraying, Ni-Resist with a higher nickel content to fightcorrosion and Silvercast for much greater wear resistance and compatibility with Roundup.

1200 PSI NeedleValve

ITEM 20-1250$3.99• New R.P.&C. valve. Cast iron needlevalve rated for 1200 PSI. ¼˝ weld in ports.Shpg. 2 lbs.

2˝ NPT BallValveITEM 20-1625$34.95• New, LEGEND Model T-800 ball valve.Heavy duty bronze body. Chrome platedbronze ball. Operate in full open or closedpositions only.SPECIFICATIONS• Ports 2˝ NPT • Temperature 350° F• Pressure (WOG) 400 PSI • Size 315/16˝ x 2⅝˝ x 3⅝˝• Water steam press. 125 PSI • Shpg. 3 lbs.

¾˝ SweatBall ValveITEM 20-1622$3.99• New, full port bronze ball valve. Chromeplated bronze ball.SPECIFICATIONS• Ports ¾˝ for copper pipe • Size 2⅝˝ x 1½˝ x 2¼˝• Pressure (WOG) 600 PSI • Shpg. 1 lb.

¾˝ Brass Ball Valve Pair

ITEM 20-1481 $8.95• New FLOTEC. Originally for installationof whole house water filters. Pair of brassball valves with polished steel ball andteflon seat. Handle included.SPECIFICATIONS• ¾˝NPT male thread one end • 100° F max. temperature• Compression coupling one end • 125 PSI• Adapters for both • 0.6˝ orifice½˝ and ¾˝ ID pipe • Shpg. 2 lbs.

800-488-3407 Pump Accessories 161&

½˝ ShutoffValveITEM 20-1388$2.99• New. ½˝ NPT brass shutoff/flow controlvalve. Union type male fitting for easy in-stallation. Size 3˝ x 1⅜˝ x 3˝. Shpg. 1 lb.

⅜˝ GateValve

ITEM 20-1113$4.99• New. Use to control flow on water sys-tems. ⅜˝ NPT. 125 PSI rating. MilwaukeeValve Co. Shpg. 1½ lbs.

PressureHose Reel

ITEM 20-1248$79.95

• New. Heavy duty hose reel will hold 50 ft.of ¼˝ high pressure spray hose. Springloaded ratchet holds reel in place. Furnishedwith ¼˝ NPT inlet swivel. 300 PSI max. Allsteel construction. Reel is 16˝ diam. x 4½˝wide with 10˝ diam. hub. Shpg. 46 lbs.

120 VAC N.C.Water Valve

ITEM 20-1419$4.95• New DOLE VALVE CO. GS-30. Normallyclosed valve opens when 120 VAC is appliedat the terminals. For use with low pressure (5PSI) water circuits. Spade terminals.SPECIFICATIONS• Coil 120 VAC • Ports ¼˝ NPTM• N.C. • Size 3½˝ x 15/16˝ x 2¾˝• Duty intermittent • Shpg. ½ lb.

½˝ BrassBall Valve

ITEM 20-1200$7.99• New WABCO. All brass 3 piece ballvalve. 250 PSI working pressure. ½˝ NPTmale/ female ports. Size 2½˝ x 1¾˝ x 2˝.Shpg. 1 lb.

120 VAC DualSolenoidValveITEM 20-1483$8.99• New, DOLE water-mixing valve. Consistsof two N.C. solenoid valves mounted in ametal and plastic frame. Screened inletports.SPECIFICATIONS• 120 VAC, 10 watt coils • ¼˝ spade terminals• Two G.H.T. inlet ports • Size 4¾˝ x 3˝ x 3˝• One ½ ̋hosebarb outlet port • Shpg. 1½ lbs.

BrassValve

ITEM 20-983$3.39• New. ⅛˝ NPT female thread. Size 2½˝ x2⅛˝ x 1½˝. Shpg. ½ lb.

120 VAC, 2 WaySolenoid ValveITEM 20-1603$8.95• New, GOULD ALLIED CON-TROL Model 306x14 two waynormally closed solenoid valve.For use in low pressure water systems.SPECIFICATIONS • Max. opening pressure• Configuration 2 way N.C. difference 12 PSI• Voltage 120 VAC • Ports ¼˝ NPTF• Power 9 watts • Size 1⅝˝ x 1½˝ x 2⅞˝• Duty intermittent • Shpg. 1½ lbs.

½˝ CheckValveITEM 20-1420$13.95• New DELTROL Model CMM-30B. Brassbody with ½˝ NPT male threads at eachend. Max. flow rate 10 GPM. 1000 PSImax. Metal/metal seat for use with liquids.Cracking pressure is 1-2.5 PSI. Size ⅞˝diam. x 2˝. Shpg. 1 lb.

Twist DisconnectCouplerITEM 20-1352$4.99• New. Screw coupling originally made forpressure washers. ⅜˝ NPT male thread onbody, 1/4˝ NPT male thread on plug. Ratedto 2500 PSI operating pressure. Shpg. 1 lb.

115 VoltSolenoid

ValveITEM 20-978$4.99

• Brand new WESTINGHOUSE. This typeis often found in dishwashers. Momentarilyenergizing coil fills dispensing chamber.De-energize coil to release liquid. IN ¾˝garden hose thread. OUT 5/16˝ hosebarb(N.C.). Operates on 120 VAC. Current drawis 7.5 watts. Size 4½˝ x 3˝ x 2˝. Shpg. 1 lb.

120 VAC SolenoidValve

ITEM 20-1470$7.95• New DOLE solenoid valve. Normallyclosed. Screened inlet. All plastic con-struction.SPECIFICATIONS • Inlet ⅜˝ NPT• Coil 120 volt AC • Outlet ⅜˝ hosebarb• Watts 10 • 50 PSI• Size 3¼˝ x 3¼˝ x 1¾˝ • Shpg. 1 lb.

Barrel DrainPetcock

ITEM 20-973$1.99• 1 ̋NPT male. Size 2¾ ̋x 2½ ̋x 1½ .̋ Shpg. 1 lb.

¾˝ NPT BallValve

ITEM 20-1621$4.99• New, full port bronze ball valve. Chromeplated bronze ball.SPECIFICATIONS• Ports ¾˝ NPT • Size 2¼˝ x 1½˝ x 2¼˝• Pressure (WOG) 600 PSI • Shpg. 1 lb.

162 Submersible Pumps www.surpluscenter.com8

Submersible12 VDCPumps

ITEM 2-956$37.95• Brand new submersible 12 VDC pump.Features bi-mount bracket for fastening tobilge bottom or transom and twist-lockhousing for easy cleaning.SPECIFICATIONS• 1000 GPH at 0 ft. head • Outlet port ¾˝ hose barb• 500 GPH at 9 ft. head • Size 3¼˝ diam. x 4˝ high• 4 amps • Shpg. 1½ lb.

ITEM 2-955 $30.95• Same as above interchangeable straightand right angle discharge barbs.SPECIFICATIONS • 750 GPH at 0 ft. head• 3 amp • 500 GPH at 6 ft. head

UtilityPump

ITEM 2-1039$104.95• Brand new LITTLE GIANT 5MSP. Ex-tremely versatile pump for many applica-tions. Can be used either submerged orsimply in standing water. Pump out pools,flooded basements, boats as well as circu-lating water or machine tool coolants. Op-erates on 115 VAC, ⅙ HP, 5 amp.Hermetically sealed and lubricated motor.Tough aluminum housing with epoxy coat-ing. 10 ft. power cord. Pumps down to ⅛˝.Delivers 1000 GPH at 10 ft. head. Max.head 26 ft. 1˝ NPT discharge port. Fur-nished with adapter for garden hose. ULListed. Size 7¾˝ x 6⅛˝ x 4⅜˝. Shpg. 8 lbs.

Mini FountainPump

ITEM 2-1172 $29.95• Brand new LITTLE GIANT. Submersible,compact, energy efficient pump for foun-tains, small waterfalls.SPECIFICATIONS• 115 VAC, 5 watts • 6 ft. cord• Adj. flow valve 30-83 GPH • Size 2½˝ x 2˝ x 2˝• Port ½˝ hosebarb • Shpg. 2 lbs.

CompactSubmersible

Pump

ITEM 2-1037 $64.95• Brand new LITTLE GIANT 1MA. Fullysubmersible with side intake and verticaldischarge. Epoxy coated housing withpolypropylene front, impeller and screen.Delivers 100 GPH at 5 ft. head. Max. head7 ft. 115 VAC, 1.1 amp. 6 ft. power cordwith molded plug. Size 4¼˝ x 3⅝˝ x 3⅜˝.Shpg. 3 lbs.

PartsWasherPump

ITEM 2-1038$93.95• Brand new LITTLE GIANT. Submersiblepump made especially for use in partswashers. Flow rate 3 GPM at 1 ft. head.Max. head 7.4 ft. Discharge ¼˝ NPT. Com-patible with UL Listed parts cleaning sol-vents. Max. temp. 100° F. Operates on 115VAC, 1.1 amps. 6 ft. power cord. Size 4˝diam. x 4¼˝. Shpg. 4 lbs.

Submersible115 VACPump

ITEM 2-1036 $58.95• Brand new LITTLE GIANT Model P-AAA.Operates with pump fully submerged inwater. Use for fountains, gardens, etc. Spe-cial case may be mounted with any sidedown. Oil filled sealed motor housing for life-time lubrication. Corrosion resistant nylonhousing. Screened intake. Pumps 70 GPHat 3 ft. head. 6 ft. power cord. Operates on115 VAC, ½ amp. UL Listed. ¼˝ NPT dis-charge port. Size 4˝ x 4˝ x 3˝. Shpg. 3 lbs.

SubmersibleSewagePump

ITEM 2-1042$294.95• Brand new LITTLE GIANT 9S-CIA. Com-pletely submersible pump for rugged dutyuse that standard sump pumps can’t han-dle. Passes liquid and solid waste up to 2˝diam. Use on construction or agriculturalsites for heavy duty dewatering. Cast ironhousing with corrosion resistant epoxycoating. Vortex nylon impeller. Oil filledmotor housing for rapid heat dissipationand lifetime lubrication.• 3400 GPH output at 10 ft. head. Max. 19ft. head. Fully automatic – on at 9 - 14˝, off at2 - 6˝. 4/10 HP motor with thermal protectionruns on 115 VAC. 12.5 amp. 15 ft. powercord. Size 11⅛˝ x 10⅜˝ x 7˝. Shpg. 38 lbs.

LineStrainers• Brand new HYPRO.Keeps debris from beingdrawn thru pump. Provideslonger component life andless downtime.SPECIFICATIONS• Polypropylene construction • 50 mesh• EPDM gasket stainlesssteel screen• 80 PSI at 70° F • Shpg. 1 lb.

ITEM 20-997 $8.45• ½˝ NPT, 7.7 sq. in. open area.

ITEM 20-998 $9.20• ¾˝ NPT, 7.7 sq. in. open area.

ITEM 20-999 $12.95• 1˝ NPT, 13.5 sq. in. open area.

12 VDC MarineCamperPumpITEM 2-924$36.99• Brand new. For boats, camper-trailers,etc. as bilge or water system pump. Non-corrosive. Use in any position provided in-take is submerged. Fits into tight,out-of-way places.SPECIFICATIONS • IN ½˝ NPT• 12 VDC at 1.8 full load amp • OUT ⅜˝ NPT• 339 GPH at 1 ft. • Size 5½˝ x 2˝ x 2˝• 95 GPH at 10 ft. • Shpg. 2 lbs.

SubmersibleSwitchKitITEM 2-1040$43.95• Brand new, LITTLE GIANT RS-5 di-aphragm switch. Converts manual pumpsto automatic operation.SPECIFICATIONS• Max. pump power • On level 6˝ to 9˝½ HP at 115 VAC • Off level 1˝ to 4˝

• Max 10 amps • Size 5˝ x 3½˝ x 2˝• Cord lgth. 10 ft. • Shpg. 1½ lbs.

115 VAC Little GiantSumpPump

ITEM 2-1041$136.95

• Brand new, LITTLE GIANT Model 6-CIA.Automatic sump pump turns on whenwater reaches 7˝ to 10˝ depth. Turns offwhen water level falls to between 1˝ and 4˝.Automatic thermal overload protection.Cast iron pump housing with protectiveepoxy coating for corrosion resistance. Oil-filled motor housing for lifetime lubricationand rapid heat dissipation. Three-prong, 8ft. power cord.SPECIFICATIONS• Voltage 115 VAC • Flow rates vs. discharge ht.• Amperage 9 Amps 46 GPM at 5 ft. head• Power ⅓ HP 29 GPM at 10 ft. head• Port 1½˝ FNPT 12.5 GPM at 15 ft. headw/ 1¼˝ FNPT adaptor 18 ft. max. head

• Min. sump dia. 18˝ • Size 9½˝ x 8½˝ x 6˝• Duty continuous • Shpg. 20 lbs.

⅓ HP, 2200 GPHSubmersibleUtilityPump

ITEM 2-1377$49.99• New, WATER ACE R33SU portable sub-mersible utility pump. Ideal multi-purposepump for many applications includingdraining basements, construction sites,sumps and other dewatering applications.Features include automatic reset thermaloverload protection, rugged thermoplasticimpact resistant housing and eight footgrounded cord. Garden hose adapter in-cluded. Removes water down to ⅛˝.SPECIFICATIONS • Flow rates• Voltage 115 VAC 2160 GPH at 0 ft. head• Amperage 10 Amps 1740 GPH at 5 ft. head• Power ⅓ HP 1620 GPH at 10 ft. head• Port 1¼˝ NPT 720 GPH at 20 ft. head• Port adapter ¾˝ GHT • Size 6˝ x 5¼˝ x 10¼˝• Min. sump depth 2˝ • Shpg. 12 lbs.

& 800-488-3407 Submersible Pumps 163

1470 GPH,⅙ HPUtilityPump

ITEM 2-1345$49.95• New, FLOTEC TEMPEST ModelFPOS1300X utility pump. Ideal multi-pur-pose pump for many household applica-tions including draining basements andsumps. Thermally protected. Garden hoseadapter included. Corrosion resistant ther-moplastic housing. Three-prong, 8 footpower cord.SPECIFICATIONS • Flow rates vs. discharge ht.• Voltage 115 VAC 1470 GPH at 0 ft. head• Amperage 5.0 amps 1250 GPH at 5 ft. head• Power ⅙ HP 930 GPH at 10 ft. head• Port 1˝ NPT 660 GPH at 15 ft. head(male garden hose adapt.) 0 GPH at 20 ft. head

• Min. pump depth 3/16˝ • Size 5⅝˝ x 5⅛˝ x 9˝• Duty continuous • Shpg. 8 lbs.

2880 GPH, ¼ HPAutomaticSumpPump

ITEM 2-1346$59.95• New, FLOTEC Model FPOS1800A auto-matic sump pump with tethered floatswitch. Pump turns on when waterreaches 12½˝ of depth, turns off at 4½˝.Automatic thermal overload protection.Corrosion resistant thermoplastic housing.Three-prong, 8 foot power cord.SPECIFICATIONS • Flow rates vs. discharge ht.• Voltage 115 VAC 2880 GPH at 0 ft. head• Amperage 8.5 amps 2280 GPH at 5 ft. head• Power ¼ HP 1620 GPH at 10 ft. head• Port 1¼˝ FNPT, 660 GPH at 15 ft. head• Port 1½˝ MNPT 0 GPH at 18 ft. head• Min. sump dia. 14˝ • Size 8˝ dia. x 9½˝ tall• Duty continuous • Shpg. 9 lbs.

1260 GPH, ⅙ HPSubmersiblePump

ITEM 2-1358$49.99• New, SIMER Model 2305 portable sub-mersible utility pump. Ideal multi-purposepump for many household applications in-cluding draining basements and sumps.Automatic reset thermal protection. Gar-den hose adapter included. Three prong 8foot power cord.SPECIFICATIONS• Voltage 115 VAC • Flow rates• Amperage 6 amps 1260 GPH at 0 ft. head• Power ⅙ HP 1140 GPH at 5 ft. head• Port 1¼˝ NPT 1120 GPH at 10 ft. headw/ garden hose adapter • Size 6˝ x 5¼˝ x 9˝

• Min. sump depth 2˝ • Shpg. 9 lbs.

Mini FountainPump

ITEM 2-1253$6.95

• New, CAL-PUMP Model P-60. Sub -mersi ble fountain pump for indoor use. Ad-justable output flow. Integral 18/3 cord iswater resistant with three prong plug. ULListed. Made in Italy.SPECIFICATIONS • 6 ft. long cord• 115 VAC • ½˝ O.D. outlet tube• 75 GPH max. • 86° F max. fluid temp.• 1½ ft. max. head • Size 1⅝˝ x 2˝ x 1¾˝• 0.084 amps, 6.2 watts • Shpg. 1½ lbs.

Mini FountainPump

• New, OASE.Submersible

fountain pumpfor indoor or outdoor use. Adjustable outputflow. Integral 18/3 cord is water resistant withthree prong plug. Two suction cups on bottomto hold pump in place. UL Listed. Made in Italy.

ITEM 2-1254 $5.99SPECIFICATIONS • 6 ft. long cord• Model SP70G • 4 watts• 115 VAC • ½˝ O.D. outlet tube• 35-70 GPH • Size 113/16˝ x 1¾˝ x 113/16˝• 31˝ max. head • Shpg. 1 lb.

ITEM 2-1255 $3.99SPECIFICATIONS • 5½ ft. long cord• Model SP40G • 4 watts• 115 VAC • ½˝ O.D. outlet tube• 30-55 GPH • Size 1⅞˝ x 1⅝˝ x 1¾˝• 18˝ max. head • Shpg. 1 lb.

1350 GPH, ¼ HPSubmersibleSump Pump

ITEM 2-1284$59.95• New, MASTERCRAFT. Submersiblesump pump with automatic float switch.Ideal for pumping water out of sumpbasins in basements and other watertransfer applications. Corrosion resistantthermoplastic cap and volute with epoxypowder-coated gloss finish. Open stylenon-clogging impeller. Thermal overloadprotection. 8 ft. grounded cord.SPECIFICATIONS• HP ¼ • Flow rates• 120 VAC 22.5 GPM at 5 ft. head• 8 amps 15.8 GPM at 10 ft. head• Max. head 17 ft. 8.3 GPM at 15 ft. head• Min. sump depth 14˝ • 8 ft. long, 3 prong power cord• Min. sump pit diam. 18˝ • Size 8˝ x 5⅞˝ x 10⅜˝• 1¼˝ NPT female port • Shpg. 11 lbs.

FootValveITEM 20-1136$14.99• New 1½˝ NPT cast iron foot valve withstrainer slots. Leather flapper valve withweight. Size 4˝ x 4˝. Shpg. 3 lbs.

Tuthill ManualTransfer PumpITEM 2-1350$29.99• New, TUTHILL Series 20hand lever piston pump forpumping fluid into a con-tainer. Poly propylene hous-ing, BUNA N seals.Economical manual trans ferpump ideal for use on barrels,drums and storage tanks. Anti-drip nozzle, check valve and 360°locking ring. Telescoping suctionpipe fits up to 36˝ high container. Compat-ible with water, gear oils, engine oils, paraf-fin, fertilizers, mild acids, an ti- freeze,hydraulic oils, diesel, de greasers, herbi-cides and pesticides. Not for use withgasoline, ethanol or methanol.SPECIFICATIONS• Flow 11 fl. oz. per stroke • Inlet 1˝ NPT• Viscosity SAE 90 max. • Outlet nozzle w/strainer• Bung adapter • Size 9¼˝ x 3½˝ x 12˝2˝ NPS • Shpg. 5 lbs.

4700 GPH, ¾ HPSubmersibleSump Pump

ITEM 2-1359$79.99

• New, SIMER Model 3988 submersiblesump pump with vertical float switch. De-signed for sumps. Cast iron base. Openstyle non-clogging impeller. Automaticreset thermal protection. Three prong 9foot power cord.SPECIFICATIONS• Voltage 115 VAC • Min. sump depth 10˝• Amperage 7 Amps • Min. sump diam. 10˝• Power ¾ HP • Flow rates• Switch settings 4700 GPH at 5 ft. head(inches of water level) 4100 GPH at 10 ft. headON 6½˝ 3500 GPH at 15 ft. headOFF 3˝ • Size 9˝ x 6½˝ x 12˝

• Port 1½˝ NPT female • Shpg. 23 lbs.

1˝ Trailer Spindle

ITEM 1-1128 $10.95• Brand new steel trailer spindle with cas-tle nut. 1˝ diam. x 8½˝ long. Shpg. 4 lbs.

8 x 7 SteelWheel

ITEM 1-3491$14.99• New, sand colored steel wheel.SPECIFICATIONS • Pilot hole 213/16˝ diam.• Wheel size 8 x 7 • Backspace 3¾˝• Bolt pattern 5 on • Size 9⅛˝ diam. x 8˝4½˝ bolt circle • Shpg. 7 lbs.

24X9.50-12Wheel AndTireAssembly

ITEM 1-3706$49.99• New, CARLISLE MULTI-TRAC C/S tire onsteel wheel with white finish. Made in theUSA. Not for highway service.SPECIFICATIONS • Mount 5 bolt on 4½˝ B.C.• Size 24X9.50-12 w/ 3¼˝ pilot• O.D. 24˝ • Tubeless• Tread turf • Pressure 22 PSI max.• Tread width 8¼˝ • Ply rating 4• Backspace 5˝ • Shpg. 33 lbs.


ITEM 1-3704$49.99• New, CARLISLE TURF-MASTER tire onsteel wheel with white finish. Made in theUSA. Not for highway service.SPECIFICATIONS • Mount 5 bolt on 4½˝ B.C.• Size 23X8.50-12 w/ 215/16˝ pilot• O.D. 23˝ • Tubeless• Tread turf • Pressure 22 PSI max.• Tread width 7½˝ • Ply rating 4• Backspace 4¾˝ • Shpg. 32 lbs.


ITEM 1-3703$49.99• New, CARLISLE tire on steel wheel withwhite finish. Made in the USA. Not forhighway service.SPECIFICATIONS • Mount 4 bolt on 4˝ B.C.• Size 22X7.50-12 w/ 2¾˝ pilot• O.D. 22˝ • Tubeless• Tread turf • Pressure 12 PSI max.• Tread width 6½˝ • Ply rating 2• Backspace 3½˝ • Shpg. 28 lbs.

26X12.00-12Wheel & TireAssembly

ITEM 1-3710$59.99• New, PROTECH MAXXIS tire on steelwheel with white finish. Not for highwayservice.SPECIFICATIONS• Size 26X12.00-12 • Backspace 5¾˝• O.D. 26˝ • Tubeless• Tread turf • Load rating 1780 lbs• Tread width 10¼˝ • Pressure 20 PSI max.• Mount 5 bolt on 4½˝ B.C. • Ply rating 4w/ 33/16˝ pilot • Shpg. 48 lbs.

18.5x8.5-8 WheelAssembly

ITEM 1-3492$29.99• New, CARLISLE wheel assembly. Sandcolored steel wheel. Filled with polymerfoam, flat proof. Not for highway service.SPECIFICATIONS • Backspace 3¾˝• Size 18.5X8.5-8 • Tubeless• O.D. 165/16˝ • Load rating 935 lbs. max.• Tread turf • Pressure 32 PSI max.• Tread width 6¾˝ • Ply rating 3• Mount 5 bolt on • Ply material nylon4½˝ bolt circle • Shpg. 64 lbs.

TrailerBearingKits

• Brand new, DURA-ROLL replacementtrailer bearing kit. For use with boat, camp-ing, utility and snowmobile trailers. 1 kitper wheel required. Bearings must bepacked with grease before installation. Kitcontents available atwww.surpluscenter.com. Fully tested andexceeds VESC regulations. Installation in-structions included.

Typical AxleBearing Bore Rating

ITEM Inner Outer (lbs.) Shpg. Price1-3535 1˝ 1˝ 2000 1 lb. $ 9.951-3536 ¾˝ ¾˝ 2000 1 lb. $ 8.951-3537 1¼˝ 1¼˝ 2000 1½ lb. $10.951-3538 1⅜˝ 11/16˝ 3500 1 lb. $11.951-3539 11/16˝ 11/16˝ 2000 1 lb. $ 8.95

½˝ I.D. WheelBearingITEM 1-362689¢• New, general purpose replacement ballbearing for wheels. Not sealed. Press fitmount.SPECIFICATIONS • Mount 1⅛˝• Bore ½˝ • Flange dia. 1¼˝• Bore thru-length 7/16˝ • Shpg. ¼ lb.

Coil-over ShockAbsorber Assembly

ITEM 28-1720 $8.95• New, coil-over shock absorber assem-blies. Ideal for go-carts, mini bikes, utilityvehicles and other equipment. Five-wayadjustable ride height settings. Chromeplated spring with black painted body.SPECIFICATIONS• Spring rate 110 lbs./inch • Mounting hole ⅜˝• Extended lgth. 12˝ • Mounting hole width 13/16˝• Travel 2˝ • Size 1¾˝ diam. x 13¼˝• Spring size 1¾˝ diam. x 7˝ • Shpg. 3 lbs.

164 Wheels & Accessories www.surpluscenter.com8

5 Bolt Low SpeedHubw/Bearings

ITEM 1-3747$9.95• New, steel 5 bolt hub. Use for non-high-way applications. Furnished with bearingsand dust cover. (Does not include lug nuts).Outside dia. of bearing housing is 2.25˝.SPECIFICATIONS• Weight capacity 1000 lbs. • Length thru bearings 3½˝• Bolt pattern • Stud size ½-20 x 1˝ long5 bolt on 4½˝ B.C. • Size 5½˝ dia. x 6˝

• Bearing ID 1˝ • Shpg. 5 lbs.

18X8.50-8Wheel AndTireAssemblyITEM 1-3705$39.99• New, CHENG SHIN PROTECH tire onsteel wheel with white finish. Not for high-way service.SPECIFICATIONS • Mount 4 bolt on 4˝ B.C.• Size 18X8.50-8 w/ 29/16˝ pilot• O.D. 17˝ • Tubeless• Tread turf • Pressure 22 PSI max.• Tread width 7½˝ • Ply rating 4• Backspace 3¾˝ • Shpg. 18 lbs.

Hi-SpeedWheelHubs

• Brand new. Fits boat and snowmobiletrailers. Includes grease cap, tapered rollerbearings, seal and studs.

ITEM 1-1133 $23.95• Four lug bolt on 4˝ bolt circle. Use with 1˝spindle. Shpg. 7 lbs.

ITEM 1-1134 $25.95• Five lug bolt on 4½˝ bolt circle. Use with1˝ spindle. Shpg. 7 lbs.

18 x 7.00-7Lug TireAssemblyITEM 1-2759$24.99• New KENDA Pathfinder tubeless tire onsteel rim. Made for use on front of ATV’s. 2ply nylon. Lug tread. Rated 195 lbs. max. at5 PSI. Not for highway service. 3½˝ centeropening on offset 4 bolt rim with 4¼˝ boltcircle. Size 17¼˝ x 6½˝ wide. Shpg. 15 lbs.

18X9.50-8Wheel & TireAssembly

ITEM 1-3600$49.99• New, CHENG SHIN tire on steel wheelwith white finish. Not for highway service.SPECIFICATIONS• Size 18X9.50-8 • Backspace 4˝• O.D. 17˝ • Tubeless• Tread turf • Load rating 695 lbs.• Tread width 8½˝ • Pressure 12 PSI max.• Mount 4 bolt on 4˝ B.C. • Ply rating 2w/ 2¾˝ pilot • Shpg. 20 lbs.

18x9.5-8.00Wheel & TireAssembly

ITEM 1-3165$49.95• New, KENDA tire on painted steel wheel.Not for highway service.SPECIFICATIONS• Size 18x9.5-8.00 • Backspace 315/16˝• O.D. 18˝ • Tubeless• Tread smooth • Pressure 24 PSI max.• Tread width 8½˝ • Ply rating 4• Mount 4 bolt hub on 4˝ B.C.• Ply material nylonw/ 2½˝ pilot • Shpg. 20 lbs.

18x8.50-8Wheel & TireAssembly

ITEM 1-3434$49.99• New, CARLISLE T-Shot Model tire onpainted steel wheel. Not for highway service.SPECIFICATIONS• Size 18x8.50-8 • Backspace 4˝• O.D. 18˝ • Tubeless• Tread turf saver • Pressure 22 PSI max.• Tread width 7˝ • Ply rating 4 ply• Mount 4 bolt on • Ply material nylon4˝ bolt circle • Shpg. 17 lbs.

13 x 5.00-6TractionWheelAssemblies

• New lug tread tires on steel rim. Not forHighway Service. Steel rim has centered hubwith crosshole on each side for left or righthand use. Tire mounted with valve stem onoutside with traction lugs going forward forright side use. Left side use would have tirestem on inside unless tire is remounted.SPECIFICATIONS • Centered hub• Size 13x5.00-6 • Tubeless• Tread directional lug • Pressure 20 PSI max.• Hub 1˝ dia. with • Ply rating 25/16˝ crosshole • Shpg. 10 lbs.

ITEM 1-3612 $16.95• GARDEN TRAC. O.D. 13˝, tread width 4˝,hub width 4˝. Dual grease zerks.

ITEM 1-3570 $12.95• CARLISLE. O.D. 12½˝, tread width 4¼˝,hub width 3⅛˝.

18x6.50-8WheelAssembly

ITEM 1-3637$39.95• New, Carlisle Turf-Saver tire on white 4bolt steel rim. Not for Hi-way Service.SPECIFICATIONS• Size 18x6.50-8 • Backspace 3⅞˝• O.D. 17˝ • Tubeless• Tread Turf-Saver • Load rating 515 lbs. max.• Tread width 5˝ • Pressure 14 PSI max.• 4 hole on 4˝ B.C. • Ply rating 22¾˝ center opening • Shpg. 14 lbs.

800-488-3407 Wheels 165&

205/60/15Wheel& TireAssy.

ITEM 1-3095$59.95• New, ARTIC mud and snow, radial tire onpainted steel wheel. Originally intended forimplement equipment. Re-treaded tire.SPECIFICATIONS • Backspace 4¼˝• Size 205/60/15 • Tubeless• O.D. 25˝ • Load rating 615 kgs. max.• Tread snow and mud (calculated) 1355 lbs. max.• Tread width 7⅞˝ • Press. 300 kilo pascals max.• Mount 5 bolt hub on (calculated) 43 PSI max.5½˝ B.C. w/ 3¾˝ pilot • Shpg. 46 lbs.

13 x 5.00-5 TractionWheel Assemblies

• New, CARLISLE X-Trac tire on steel rim.Built for snow blowers. Not for HighwayService. Very slight rust on rim.SPECIFICATIONS • Hub ⅞˝ dia. x 5⅛˝ wide,• Size 13x5.00-5 ¼˝ crosshole• O.D. 12˝ • Tubeless• Tread directional lug • Pressure 20 PSI max.• Tread width 5˝ • Ply rating 2• Hub offset 1½˝ • Shpg. 10 lbs.

ITEM 1-3533-L $18.95• Mounted for LH side (CCW on stem side).

ITEM 1-3533-R $18.95• Mounted for RH side (CW on stem side).

26x12.00-12Turf SaverTire

ITEM 1-3571$34.99• New, CHENG SHIN tire. Ideal for use onan garden tractors. Not for highway serv-ice.SPECIFICATIONS • Load rating 1185 lbs. max.• Size 26x12.00-12 • Pressure 10 PSI max.• O.D. 23˝ • Ply rating 2• Tread Turf Saver • Ply material nylon• Tread width 10˝ • Tubeless• Actual weight 20 lbs. • Shpg. 42 lbs. (oversize)

18x6.50-8Drive WheelAssembly

ITEM 1-3711$34.95• New, CARLISLE Turf-Saver tire on graysteel rim. Not for Hi-way Service.SPECIFICATIONS• Size 18x6.50-8 • Hub offset 1½˝• O.D. 17˝ • Tubeless• Tread turf-saver • Load rating 515 lbs. max.• Tread width 5˝ • Pressure 14 PSI max.• Hub ¾˝ bore w/keyway • Ply rating 2• Length thru bore 3½˝ • Shpg. 15 lbs.

16x6.50-8 OffsetTraction Wheels

1-3189-L 1-3189-R

• New CARLISLE Model X-TRAC tiremounted on painted steel wheel. Directionallug tread for use on left-hand side of a vehi-cle. Smooth bore with ¼˝ diameter cross-hole. Not for highway service.SPECIFICATIONS • Max. pressure 14 PSI• Size 16x6.50-8 • Outside rim width 5⅜˝• O.D. 15˝ • Bearing type none• Tread directional lug • Hub offset• Tread width 5⅜˝ • Offset 2¼˝• Bore ⅞˝ diam. • Tubeless• Bore thru-lgth. 6⅛˝ • Ply rating 2• Load range 415 lbs. • Shpg. 19 lbs.

ITEM 1-3189-L $23.95• For use on left-hand side of vehicle.

ITEM 1-3189-R $23.95• For use on right-hand side of vehicle.

10½˝ Lug TireAssembly

ITEM 1-3532$13.95• New, TITAN pneumatic lug tread tire, builtfor Gardenway tillers. Not for Hi-way Service.SPECIFICATIONS • Offset ⅜˝• Size 3.25-5 • Tubeless• O.D. 10½˝ • Load rating A• Tread V-Lug • Pressure 17 PSI max.• Tread width 2¾˝ • Ply rating 2• Hub 1˝ bore, ¼˝ cross hole • Shpg. 6 lbs.

4.10/3.50-6Wheel Assy.

ITEM 1-3657$12.95• New, rubber tire on gray steel wheel. Off-set hub. Not for highway use.SPECIFICATIONS• Size 4.10/3.50-6 • Tire type tube• O.D. 12˝ • Load range B• Tread knobby • Max load 400 lbs.• Tread width 3˝ • Pressure 30 PSI max• Hub bore ⅝˝ ball bearings • Ply rating 4• Hub width 3¼˝ • Shpg. 7 lbs.

3.00-4 PneumaticTire Assembly

ITEM 1-3516$4.99• New, knobby tread tire on plastic rim.SPECIFICATIONS • Offset Hub• Size 3.00-4 • Inner tube• O.D. 10˝ • Ply rating 2• Hub ½˝ bore x 2¼˝ wide • Shpg. 3 lbs.

7½˝ x 2˝ WheelAssembly

ITEM 1-1787$7.99• New. Gray tire and plastic wheel. 2¼˝ widehub has 5/16˝ ID ball bearings. 36 PSI max.Furnished with 3˝ long axle bolt. Shpg. 2 lbs.

4.10x3.50-4 PneumaticDrive Wheel

ITEM 1-3499$5.99• New, go cart drive wheel. Yellow steel rimwith offset drive hub.SPECIFICATIONS• Size 4.10x3.50-4 • Tube• O.D. 10˝ • Load rating 300 lbs. max.• Tread knobby • Pressure 30 PSI max.• Tread width 3˝ • Ply rating 2• Hub ⅝˝ bore x 2⅛˝, • Ply material nylon3/16˝ keyway • Shpg. 5 lbs.

4.10/3.50-6WheelAssy.

ITEM 1-1938$23.99• New, CHENG SHIN rubber tire on yellowsteel wheel. ⅝˝ diam. x 2½˝ smooth shafton bearings with ⅜˝-16 female thread ateach end. Includes brake drum 4⅛˝ diam.x 1˝ wide. Offset hub. Not for highway use.SPECIFICATIONS • Tire type tube• Size 4.10/3.50-6 • Load range A• O.D. 12˝ • Pressure 30 PSI max• Tread knobby • Ply rating 2• Tread width 3˝ • Shpg. 8 lbs.

13 x 5.00-6Wheel

ITEM 1-1789$9.99• New. Turf saver tire mounted on 6˝ diabright orange plastic rim. 20 PSI max. ¾˝bore x 4˝ wide offset hub. 12½˝ dia. x 4¾˝wide. Carlisle 2 ply rating tire, made inUSA. Includes plastic bushings for axle.12½˝ OD. Shpg 6 lbs.

13 x 5.00-6Turf Tire

ITEM 1-2082$9.99• New. KENDA. Import turf tire. For lowspeed off road use only.SPECIFICATIONS • 40 PSI max.• Size 13 x 5.00-6 • Tubeless• 4 ply • Shpg. 6 lbs.

166 Wheels www.surpluscenter.com8

11x4.00-4WheelAssembly

ITEM 1-3163$25.95• New, CARLISLE tire on steel rim withheavy roller bearings. Grease zerk for axle.SPECIFICATIONS• Size 11-4.00-4 • Tubeless• O.D. 10½˝ • Pressure 45 PSI max.• Tread width 4˝ • Rating 4 ply• Hub ¾˝ dia. x 4⅜˝ wide • Max. load 350 lbs.w/roller bearings • Shpg. 7 lbs.

5.30 x 4.50-6Wheel Assy.

ITEM 1-2926$21.95• New, CHENG SHIN tire mounted onpainted steel wheel. Smooth bore with ¼˝cross-hole. Not for highway service. Saw-tooth tread.SPECIFICATIONS • 13/16˝ hub extension• Size 5.30 x 4.50-6 beyond rim face• 14¾˝O.D., 3½˝ tread width • Tube type• ¾˝ bore • 65 PSI max.• 3⅝˝ bore width • 4 ply rating• Load range B • Shpg. 11 lbs.

10˝ Lug Tire Assemblies

• New, solid rubber lug tread tire.SPECIFICATIONS FOR BOTH• O.D. 10˝ • Hub 1˝ bore,• Tread V-Lug 5/16˝ cross hole• Tread width 2½˝ • Offset ¼˝• Hub width 3˝ • Shpg. 7 lbs.

ITEM 1-3569-L $7.95• Mounted for LH side (CW on crossholeside).

ITEM 1-3569-R $7.95• Mounted for RH side (CW on crossholeside).

9 x 3.50-4WheelAssembly

ITEM 1-3581$21.95• New, Kenda smooth tread tire on steelrim. Roller bearings in hub. Grease zerk.SPECIFICATIONS • Hub ¾˝ bore x 4⅛˝ wide,• Size 9 x 3.50-4 centered• O.D. 8˝ • Load rating 230 lbs. max.• Tread smooth • Pressure 50 PSI max.• Tread width 3.5˝ • Ply rating 4• Tubeless • Shpg. 5 lbs.

8x2.50-4Wheel & TireAssemblies

$5.99 each• New, pneumatic tire on steel wheel.SPECIFICATIONS FOR ALL• Size 8x2.50-4 • Load capacity 310 lbs.• O.D. 8½˝ • Bearing ball• Wheel width 2⅛˝ • Tube type• Bore ½˝ • Pressure 50 PSI max.• Bore thru-length 2⅞˝ • Ply rating 4• Hub type centered • Shpg. 5 lbs.

ITEM Finish Tread Color1-3673 Bright brass Black1-3676 Galvanized Black1-3681 Bright chrome Black1-3680 Bright brass Gray


7x1.50ReplacementWheel

ITEM 28-1056$2.99• Brand new. Plastic hub wheel 7 x 1.50. Fit½˝ axles. 1⅝˝ wide offset hub. Shpg. 2 lbs.

LightweightSpokedWheelITEM 1-2770$3.95• New, rubber tire on plastic wheel. Dia-mond tread pattern. Centered hub, smoothbore.SPECIFICATIONS • 9/16˝ bore• 13⅝˝ O.D. • 2⅜˝ hub width• 1¾˝ width • Shpg. 4 lbs.

TranslucentLight UpScooterWheelsITEM 1-3523-Y$4.99• New, polyurethane light up yellowscooter wheels. Four internal LEDs thatlight up when the wheel rotates. No batter-ies required, internal magnets generate thepower to light the LEDs. Shielded ballbearings. Ideal replacement or projectwheels. Sold in pairs.SPECIFICATIONS • Wheel color yellow• Wheel dia. 100mm (4˝) • Bore 8mm (0.315˝)• Wheel width 25.4mm (1˝) • Bearing type ABEC 5• LED color Red • Shpg. 2 lbs.

800-488-3407 Wheels 167&

TranslucentScooterWheels

$2.99 each pair• New, CX SKATE Liquid Metal™polyurethane scooter wheels. Shielded ballbearings. Ideal replacement or projectwheels. Sold in pairs.SPECIFICATIONS• Wheel dia. 100mm (4˝) • Bore 8mm (0.315˝)• Wheel width 25.4mm (1˝) • Bearing Type ABEC 5• Wheel durometer 88A • Shpg. 2 lbs.

ITEM 1-3521-B BlueITEM 1-3521-G Green

ITEM 1-3521-R Red

TranslucentVivid ColorScooterWheels

$2.99 each pair• New, CX SKATE Liquid Metal™ poly ure -thane scooter wheels. Vivid color series.Shielded ball bearings. Ideal replacementor project wheels. Sold in pairs.SPECIFICATIONS• Wheel dia. 100mm (4˝) • Bore 8mm (0.315˝)• Wheel width 25.4mm (1˝) • Bearing type ABEC 5• Wheel durometer 88A • Shpg. 2 lbs.

ITEM 1-3526-G Green

ITEM 1-3526-P PinkITEM 1-3526-PU Purple

6˝ x 17/16˝ SolidRubber TireOn Plastic Wheel

ITEM 1-3110$3.95• New, FALLSHAW Model PRA150 solidrubber tire on plastic wheel.SPECIFICATIONS• Wheel size 6˝ x 17/16˝ • Tread pattern 4 groove• Wheel bearings bushing • Bore & thru-length• Hub centered ½˝ diam. x 1½˝• Load capacity 165 lbs. • Shpg. 2 lbs.

9¾˝ x 1¾˝ SolidRubber TireOn Plastic Wheel

ITEM 1-3112$7.95• New, FALLSHAW solid rubber tire onplastic wheel.SPECIFICATIONS • Tread pattern 4 groove• Wheel size 9¾˝ x 1¾˝ • Bore & thru-lgth. ¾˝ diam.• Wheel: steel drive bushing x 111/16˝ w/ 3/16˝ keyway• Hub centered • Shpg. 5 lbs.

ITEM 1-3112-A $6.95• Same as ITEM 1-3112 above except nopress in hub.

6˝ x 1½˝PlasticHub WheelITEM 1-3196$2.69• New, plastic hub wheel with diamondtread tire. Offset hub.SPECIFICATIONS • Bore ½˝• Diameter 6˝ • Hub width 1⅜˝• Width 1½˝ • Shpg. 1½ lbs.

10˝ x 2½˝ Semi-PneumaticWheelAssemblyITEM 1-3510$4.99• New, semi-pneumatic tire on gray plasticwheel. Centered hub.SPECIFICATIONS • Bore 5/8˝ dia.• Size 10˝ x 2½˝ • Bore thru-length 2˝• Tread ribbed • Shpg. 4 lbs.

10.25˝ x 3.25˝SolidWheel

ITEM 1-3601$5.99• New, solid rubber tire on gray steelwheel. Diamond tread pattern. Hub hasholes for 5/16˝ drive pin.SPECIFICATIONS • Bore thru-length 3˝• Size 10.25˝ dia. x 3.25˝ w. • Hub offset ⅞˝• Hub bore ¾˝ diam. • Shpg. 8 lbs.

12˝ Semi-PneumaticRubber TiredWheel

ITEM 1-3605$17.99• New. Ribbed tread semi-pneumatic tireon one piece steel rim.SPECIFICATIONS• Size 12˝ x 3˝ • Load rating 185 lbs.• Tread width 2⅛˝ • Bearings ball• Hub ⅝˝ bore x 2½˝ wide • Shpg 10 lbs.

8˝ Solid RubberTired Wheel

ITEM 1-3613$14.95• New. Ribbed tread heavy duty solid rub-ber tire on one piece steel rim.SPECIFICATIONS • Hub ¾˝ bore x 3˝ wide• Size 8˝ x 2½˝ • Hub offset 1˝• Tread width 1⅞˝ • Bearings ball• Load capacity 400 lbs. • Shpg 7 lbs.

12 x 2 WheelAssembly

ITEM 1-3572$16.95• New, solid rubber tire molded onto alu-minum wheel with caged roller bearinghub. Grease zerk for hub. Heavy duty con-struction.SPECIFICATIONS • Hub bore 1⅛˝• Size 12˝ dia. x 2˝ • Hub width 2⅛˝• Tread smooth • Shpg. 10 lbs.

12˝ x 1⅞˝ Rubber-Over-PlasticWheel

ITEM 1-3607$3.99• New, yellow plastic wheel with rubbertire. Ribbed tire tread.SPECIFICATIONS • Bore ½˝ diam.• O.D. 12˝ • Hub width 2¾˝• Tread width 1⅞˝ • Shpg. 4 lbs.

6˝ x 2˝PolyolefinWheelITEM 1-3508$2.99• New, hard black polyolefin wheel origi-nally made for garbage carts.SPECIFICATIONS • Bore thru-length 29/32˝• Size 6˝ diam. x 2˝ wide • Bearing plain• Load capacity 300 lbs. • Hub centered• Bore ½˝ diam. • Shpg. 2 lbs.

6˝ x 2˝ PlasticWheelITEM 1-330049¢• New, B & D MOLDED PRODUCTS blow-molded plastic wheel.SPECIFICATIONS • Tread pattern lug• Wheel size 6˝ x 2˝ • Bore ½˝ diam.• Wheel bearings N/A • Bore thru-length 113/32˝• Hub offset • Shpg. ¼ lb.

4˝ x 1¼˝Roller

ITEM 1-1908$2.99• New. Polyurethane conveyor roller with 21/32˝ID bearing. Capacity 500 lbs. Shpg. 1 lb.

5˝ BogieWheel

ITEM 1-3122$2.99• New, solid rubber wheel on riveted metalhub. Ball bearings. Offset hub, one sidehas chamfered face with 0.70˝ max I.D.SPECIFICATIONS • Hub bore ⅜˝• O.D. 5˝ • Hub width 13/16˝• Tread smooth • Hub offset 0.40˝• Tread width tapers ¾ ̋to ¼˝ • Shpg. 1 lb.

ITEM 1-3479 $2.99• Same as ITEM 1-3122 above except hubbore is 5/16˝.

8˝ x 1½˝PolyurethaneWheelITEM 1-3740$2.49• New, JARVIS wheel. Blue polyurethanetread bonded to polyolefin wheel.SPECIFICATIONS • Bore thru-length 23/32˝• Size 8˝ dia. x 1½˝ wide • Bearing Delrin• Load capacity 800 lbs. • Hub centered• Bore ½˝ diam. • Shpg. 3 lbs.

168 Wheels www.surpluscenter.com8

10˝ x 1¾˝WheelAssemblyITEM 1-3518$8.99• New, UNIFIT semi-pneumatic tire onwhite finish steel wheel. Centered hub. Ballbearings.SPECIFICATIONS• Size 10˝ x 1¾˝ • Load rating 80 lbs.• O.D. 10˝ • Bore ½˝ dia.• Tread ribbed • Bore thru-length 1½˝• Tread width 15/16˝ • Shpg. 5 lbs.

3⅞˝ x ¾˝Wheel

ITEM 1-1510$1.99• New. Hard plastic 3⅞˝ diam. x ¾˝ widewheel. 3/16˝ diam. x 5/16˝ threaded stud formounting. Shpg. ½ lb.

6 x 1.5 Semi-PneumaticWheel Assy.

ITEM 1-3227$2.99• New, semi-pneumatic tire on red pow-der-coated steel wheel. Centered hub. Ballbearings.SPECIFICATIONS• Size 6 x 1.5 • Load rating 55 lbs.• O.D. 6˝ • Bore ½˝ dia.• Tread ribbed • Bore thru-lgth. 1˝• Tread width 1˝ • Shpg. 3 lbs.

10 x 2.50 WheelAssembly

ITEM 1-3397$4.99• New, ribbed tread semi-pneumatic rub-ber tire on gray plastic wheel hub.SPECIFICATIONS • Centered hub ⅝˝ bore• Size 10˝ x 2.50˝ • Hub width 21/16˝• Tread ribbed • Size 9⅞˝ dia. x 2½˝• Capacity 125 lbs. • Shpg. 5 lbs.

12˝ x 1¾˝ Semi-PneumaticWheelAssemblyITEM 1-3519$9.99• New, UNIFIT semi-pneumatic tire onwhite finish steel wheel. Centered hub. Ballbearings.SPECIFICATIONS• Size 12˝ x 1¾˝ • Load rating 90 lbs.• O.D. 12˝ • Bore ½˝ dia.• Tread ribbed • Bore thru-length 2¼˝• Tread width 15/16˝ • Shpg. 6 lbs.

10˝ x 2½˝SolidWheel

ITEM 1-3658$15.95• New, Valley Industries solid rubber tire ontwo piece steel wheel.SPECIFICATIONS • Bore thru-length 2˝• Diameter 9½˝ • Bearing ball• Tread width 1⅝˝ • Hub offset 1½˝• Bore ⅝˝ diam. • Shpg. 9 lbs.

7¾˝ x 2¼˝ SolidRubberWheelITEM 1-3512$2.99• New, solid rubber tire with ribbed treadon plastic hub wheel. tire. Offset hub.SPECIFICATIONS • Bore ½˝• Diameter 7¾˝ • Hub width 1⅜˝• Width 2¼˝ • Shpg. 3 lbs.

7˝ x 1¼˝ PlasticHubWheelITEM 1-3513$1.99• New, plastic hub wheel with diamondtread tire. Offset hub.SPECIFICATIONS • Bore ½˝• Diameter 7˝ • Hub width 1⅜˝• Width 1¼˝ • Shpg. 1½ lbs.

10x3.5 WheelAssembly

ITEM 1-3756$12.95• New,solid rubber tire on gray steel wheel.Offset hub. Not for highway use.SPECIFICATIONS• O.D. 10˝ • Hub bore 1˝• Tread block • Hub width 2¼˝• Tread width 2¾˝ • Shpg. 8 lbs.

2˝ x ¾˝ RedPoly WheelITEM 1-375469¢• New, FAULTLESS red polyurethane treadon plastic hub.SPECIFICATIONS• Size 2˝ diam. x ¾˝ wide • Bushing plastic• Bore ¼˝ diam. • Hub centered• Bore thru-length 0.95˝ • Shpg. ¼ lb.

8˝ x 1¾˝Wheels

1-2685 1-2686

• New, tires on a plastic hub. “Diamond”tread pattern.SPECIFICATIONS• Wheel size 8˝ dia. x 1¾˝ • ⅜˝ bore

ITEM 1-2685 $1.99• Solid rubber, 17/16˝ hub width. Shpg. 4 lbs.

ITEM 1-2686 $1.49• Semi-pneumatic, 1½ ̋hub width. Shpg. 3 lbs.

6˝ x 2˝ RigidPlateCaster

ITEM 1-3305$12.95• New, FAULTLESS rigid plate caster. “K-wheel” polyurethane tire. Zinc plated yoke.SPECIFICATIONS• Wheel size 6˝ x 2˝ • Mount four bolt• Load capacity 900 lbs. on 3⅝˝ x 3˝ centers• Top plate 3⅞˝ x 4½˝ • Bolt holes 7/16˝ dia.• Mounting height 7¼˝ • Shpg. 5 lbs.

6˝ x 2˝ RigidPlate Casterw/ Shock Absorber

ITEM 1-3313$19.95• New FAULTLESS rigid plate caster withspring action shock absorber. Glass fillednylon tire. Painted steel yoke. Com pres -sion action absorbs jolts and bumps.SPECIFICATIONS• Wheel size 6˝ x 2˝ • Mount four bolt on• Load capacity 1200 lbs. 4⅛˝ x 4½˝ centers• Top plate 5˝ x 5½˝ • Bolt holes ⅜˝ diam.• Mounting height 91/16˝ • Shpg. 10 lbs.

8˝ x 2˝ RigidPlateCasterITEM 1-3304-R$29.99• New FAULTLESS caster with spring ac-tion shock absorber. “SUPER K” poly ure -thane tire. Painted steel yoke. Compressionaction absorbs jolts and bumps.SPECIFICATIONS• Wheel size 8˝ x 2˝ • Mount four bolt on• Load capacity 1500 lbs. 4⅛˝ x 4½˝ centers• Top plate 5˝ x 5½˝ • Bolt holes ⅜˝ dia.• Mounting height 10⅜˝ • Shpg. 12 lbs.

800-488-3407 Plate Casters & Rigid Casters 169&

5˝ x 2˝ Steel Plate CastersSPECIFICATIONS• Steel frame • 5˝ diam. x 2˝ wide wheel• Four bolt mount on 3˝ x 3˝ or 2⅝˝ x 3⅝˝ ctrs.• 6½˝ from floor to plate top • Mtg. plate 4˝ x 4½˝ x ¼˝

1-2275-R 1-2276-R 1-2277-R

Plastic Wheel - 400 lbs. Capacity ITEM Style Condition Shpg. Price 1-2275-R Rigid New 5 lbs. $7.95 1-2276-R Rigid New take-offs 5 lbs. $6.95Phenolic Wheel - 700 lbs. Capacity ITEM Style Condition Shpg. Price 1-2277-R Rigid New 6 lbs. $8.95

Rubber TireHeavy DutyCasters• Heavy duty casterswith cast iron wheelsand rubber tires. Usefor work tables, mate-rial dollies, enginestands, etc. Grease zerkson axles and swivels. Roller bearings. Allsizes have 4⅝˝ x 3⅞˝ top plate.4˝ x 2˝ Wheel 350 lb. CapacityITEM 1-1720-R Rigid 7 lbs. $9.99ITEM 1-1720-S Swivel 7 lbs. $11.995˝ x 2˝ Wheel 450 lb. CapacityITEM 1-1770-R Rigid 7 lbs. $10.99ITEM 1-1770-S Swivel 7 lbs. $12.956˝ x 2˝ Wheel 500 lb. CapacityITEM 1-1721-R Rigid 8 lbs. $11.99ITEM 1-1721-S Swivel 8 lbs. $12.998˝ x 2˝ Wheel 600 lb. CapacityITEM 1-1722-R Rigid 10 lbs. $16.99ITEM 1-1722-S Swivel 12 lbs. $18.99

Steel Wheel Casters

Rigid Swivel

• Brand new. Heavy duty steel wheel cast-ers. Use on work tables, material dollies,carts, etc. Grease zerks on swivels andaxles. All sizes have 4½˝ x 3⅞˝ top plate.4˝ x 2˝ Wheel 900 lb. CapacityITEM 1-1991-R Rigid 7 lbs. $11.95ITEM 1-1991-S Swivel 7 lbs. $14.955˝ x 2˝ Wheel 900 lb. CapacityITEM 1-1780-R Rigid 9 lbs. $13.95ITEM 1-1780-S Swivel 9 lbs. $15.956˝ x 2˝ Wheel 900 lb. CapacityITEM 1-1781-R Rigid 9 lbs. $18.95ITEM 1-1781-S Swivel 9 lbs. $19.958˝ x 2˝ Wheel 900 lb. CapacityITEM 1-1782-R Rigid 14 lbs. $20.95ITEM 1-1782-S Swivel 14 lbs. $22.95

5˝ x 1½˝ PolyolefinRigid PlateCaster

ITEM 1-2376$4.99• New, COLSON. Steel frame with blackpolyolefin wheel.SPECIFICATIONS • 6⅜˝ floor to plate top• 5˝ dia. x 1½˝ wide wheel • Load capacity 400 lb.• Slotted four bolt mount • Mtg. plate 4˝ x 4½˝2⅝˝ x 3⅝˝ to 3˝ x 3˝ ctrs. • Shpg. 2 lbs.

5˝ x 2˝ RigidPlate Caster

ITEM 1-2380$5.99• Used take-offs, steel frame rigid platecaster with a 5˝ diam. x 2˝ wide hard plasticwheel. Top plate 4˝ x 4½˝, with four boltmounting 2¾˝ x 3¼˝. Working height 6¼˝.250 lbs. capacity. Shpg. 5 lbs.

6˝ x 2˝ RigidPlate Caster

ITEM 1-2806-R$11.95• New. Ball bearing rigid plate caster with6˝ diam. x 2˝ wide polypropylene wheel.Top plate 4˝ x 4½˝. Four bolt mount 2⅝˝ x3¼˝. Working height 7½˝. 550 lbs. capacity.Grease zerks on axle and swivel assembly.Shpg. 7 lbs.

5˝ x 2˝ RigidPlateCasterITEM 1-2271-R$10.99• New, FAULTLESS rigid plate caster. Steelconstruction with phenolic wheel. Ball bear-ings on wheel axle. Grease zerk on axle.SPECIFICATIONS • Top plate• Wheel 5˝ diam. x 2˝ 3⅞˝ x 4½˝ x ¼˝• Capacity 900 lbs. • Four bolt mount• Height from floor to 2⅝˝ x 3⅝˝ or 3˝ x 3˝ ctrs.mtg. plate 6½˝ • Shpg. 6 lbs.

8˝ PneumaticRigidCasterITEM 1-2784-R$10.95• New, pneumatic tire plate caster givescushioned ride for load with less floor wear.SPECIFICATIONS• 2.50-4 gray tire • Mtg. pattern 2⅝˝ x 3⅝˝• 8˝ diameter slotted to 3˝ x 3˝• 200 lb. load capacity • 3⅞˝ x 4½˝ mtg. plate• 9½˝ working height • Shpg. 8 lbs.

2½˝ diam. x ¾˝Rigid Caster

ITEM 1-1526$1.99• New. 65 lb. capacity. Top plate is 29/16˝ x1½˝. Height 3⅛˝. Wheel 2½˝ diam. x ¾˝.Shpg. ¾ lb.

RigidCasterYokes

$1.49 each• New, zinc plated caster yoke. ½˝ dia. axleholes.

Max.Wheel Inside

ITEM Dia. Width Mtg. Pattern Shpg.1-3597 6˝ 2⅜˝ 2⅝˝ x 3⅝˝ to 3˝ x 3˝ 3 lbs.1-3303 8˝ 2½˝ 4½˝ x 4⅛˝ 4 lbs.

8˝ x 2˝ SwivelPlate CastersWith Brake

• Used, ALBION swivel plate caster withbrake. Grease zerks for ball bearings onswivel and axle. Polypropylene wheel.SPECIFICATIONS • Mounting height 7½˝• Wheel size 8˝ dia. x 2˝ • Mount slotted• Load capacity 1000 lbs. 2⅝˝ x 3⅝˝ to 3˝ x 3˝• Top plate • Bolt holes 7/16˝

4˝ x 4½˝, 3/16˝ thick • Shpg. 9 lbs.

ITEM 1-3627 $14.95ITEM 1-3628 $16.95• Includes swivel lock.

6˝ x 1½˝ RigidPlate Caster

ITEM 1-3630-R$6.95• Used hard poly wheel rigid plate caster.Stainless steel yoke and plate.SPECIFICATIONS• Wheel size 6˝ dia. x 1½˝ • Mounting height 7½˝• Load capacity 450 lbs. • Slotted 2⅝˝ x 3⅝˝ to 3˝ x 3˝• Top plate 3¾˝ x 4½˝ • Bolt holes ⅜˝• Grease zerk for axle • Shpg. 5 lbs.

170 Swivel Plate Casters www.surpluscenter.com8

6˝ x 2˝ SwivelPlateCasterITEM 1-3661$11.95• Used, Colson series 4 swivel plate caster.Performa rubber tire. Roller bearing on axlewith grease zerk.SPECIFICATIONS • Mounting height 7½˝• Wheel size 6˝ dia. x 2˝ • Slotted• Load capacity 600 lbs. 3˝ x 3˝ to 2⅝˝ x 3⅝˝• Stem ⅜˝ • Bolt holes 7/16˝• Top plate 4˝ x 4½˝ • Shpg. 6 lbs.

6˝ x 2˝PlateCasters

• New, ER WAGNER caster. Polyolefinwheel with thread guards. Plain bearing.SPECIFICATIONS • Mounting height 9½˝• Wheel size 6˝ dia. x 2˝ • Mount 1¾˝ x 2⅝˝• Load capacity 400 lbs. slotted to 3˝• Top plate 2¾˝ x 3¾˝ • Bolt holes 5/16˝

ITEM 1-3228 $7.99• Rigid caster. Shpg. 3 lbs.

ITEM 1-3229 $8.99• Swivel caster w/brake that locks wheel.Shpg. 4 lbs.

125 mm x 32 mmSwivel PlateCasters

• Used, RHOMBUS swivel plate casters.Thermoplastic polyurethane wheel withplastic wheel center.SPECIFICATIONS• Wheel size • Mounting height 6⅜˝

125mm(5˝) x 32mm(1¼˝) • Mount four bolt on• Load capacity 1⅞˝ x 2⅞˝ centers

100 kg or 220 lbs. • Bolt holes 5/16˝ dia.• Top plate 2¾˝ x 3¾˝ • Shpg. 3 lbs.

ITEM 1-3287-B $7.99• Swivel and wheel lock.

ITEM 1-3287-C $6.99• Single position swivel lock.

5˝ SwivelPlate Caster

ITEM 1-3191$1.99• New, JARVIS CASTER, swivel platecaster. Grey thermoplastic rubber treadbonded to black polyolefin wheel core. Ballbearing swivel.SPECIFICATIONS • Mounting height 5¾˝• Wheel size 5˝ dia x 15/16˝ • Mtg. pattern 1¾˝ x 3˝• Load capacity 125 lbs. • Bolt holes 5/16˝• Top plate 3⅝˝ x 2⅜˝ • Shpg. 2 lbs.

5˝ x 15⁄16˝ SwivelPlate Caster

w/Brake

ITEM 1-3446$4.99

• New, FAULTLESS swivel plate casterwith wheel lock. Solid polypropylene wheelplated steel yoke.SPECIFICATIONS• Wheel size 5˝ dia. x 15/16˝ • Mount four bolt on• Load capacity 150 lbs. 1¾˝ x 3˝ centers• Top plate 29/16˝ x 3⅝˝ • Bolt holes 5/16˝ diam.• Mounting height 513/16˝ • Shpg. 1½ lbs.

5˝ SwivelPlateCasterITEM 1-3677$4.95• New, JARVIS Caster, swivel plate casterwith brass finish yoke and side covers.Grey thermoplastic non-marking rubbertread bonded to polyolefin wheel core. Ballbearing swivel and axle.SPECIFICATIONS • Mounting height 6¼˝• Wheel size 5˝ dia x 1¼˝ w. • Mounting pattern 1¾˝ x 3˝• Load capacity 300 lbs. • Bolt holes 5/16˝• Top plate 3⅝˝ x 2⅜˝ • Shpg. 3 lbs.

5˝ x 2˝ SwivelPlateCasterITEM 1-3660$9.95• Used, in good condition swivel plate casterwith grease zerk on both swivel and axle.SPECIFICATIONS• Wheel size 5˝ dia. x 2˝ • Mount slotted• Load capacity 700 lbs. 2⅝˝ x 3⅝˝ to 3˝ x 3˝• Top plate 3⅞˝ x 4½˝ • Bolt holes 7/16˝• Mtg. height 6˝ • Shpg. 7 lbs.

125mm x 32mm SwivelPlate Casterw/ Swivel Lock

ITEM 1-3287-A$6.99• New, RHOMBUS swivel plate caster.Metal lever single position swivel lock (doesnot lock wheel). Thermoplastic polyurethanewheel with plastic wheel center.SPECIFICATIONS• Wheel size • Mounting height 6⅜˝

125mm (5˝) x 32mm (1¼˝) • Mount 4 bolt on• Load capacity 1⅞˝ x 2⅞˝ ctrs.

100 kg or 220 lbs. • Bolt holes 5/16˝ diam.• Top plate 2¾˝ x 3¾˝ x ⅛˝ • Shpg. 3 lbs.

125 mm x 32 mmSwivel PlateCasterITEM 1-3308$6.99• New, RHOMBUS swivel plate caster.Thermoplastic polyurethane wheel withplastic wheel center.SPECIFICATIONS• Wheel size • Mounting height 6⅜˝

125mm(5˝) x 32mm(1¼˝) • Mount four bolt on• Load capacity 1⅞˝ x 2⅞˝ centers

100 kg or 220 lbs. • Bolt holes 5/16˝ dia.• Top plate 2¾˝ x 3¾˝ • Shpg. 3 lbs.

125mm x 32mmSwivel PlateCasterw/ Brake

ITEM 1-3485$8.99• New, RHOMBUS swivel plate caster withwheel and swivel lock. Solid plastic wheel.Plated steel caster yoke.SPECIFICATIONS• Wheel size 125mm x 32mm • Mount four slots on• Load cap. 100 kg. (220 lbs.) 2⅛˝ x 1⅞˝ ctrs.• Top plate 31/16˝ x 29/16˝ • Bolt holes 5/16˝ diam.• Mounting height 69/16˝ • Shpg. 3 lbs.

8˝ x 2˝ SwivelPlateCaster

ITEM 1-3253$15.95• New, MHS Caster Model S182R. Non-marking gray Santoprene rounded edgetire molded onto Polyolefin wheel. Rollerbearings. Grease zerk on axle and swivel.SPECIFICATIONS• Wheel size 8˝ dia. x 2˝ • Mount 2⅝˝ x 3⅝˝• Load capacity 700 lbs. slotted to 3˝ x 3˝• Top plate 4˝ x 4½˝ • Bolt holes ⅜˝• Mounting height 9½˝ • Shpg. 8 lbs.

4˝ Plate Caster Setw/Adjustable

Height

ITEM 1-3137 $18.99• New, plate caster set. Two swivel andtwo rigid casters. Rigid casters feature ad-justable top plate height. Rigid castersmounting height can be adjusted from 4⅝˝minimum to 5˝ maximum. Plated steel yokewith a hard plastic wheel. Brake lock onwheels of rigid caster.SPECIFICATIONS• Wheel size 4˝ dia. x 1˝ w. • Mount 4 bolt on• Top plate 3¾˝ x 2½˝ centers4⅛˝ x 2⅞˝ x ⅛˝ thick • Bolt holes ¼˝ diam.

• Mtg. height 4⅝˝ min. • Shpg. 8 lbs.

2⅞˝ x 1¾˝ SwivelPlate Caster

ITEM 1-3121$3.95• Used FAULTLESS swivel caster. Steelframe with black polyolefin wheel.SPECIFICATIONS • Plate 4⅛˝ x 3⅛˝ x ⅛˝• Wheel size • Mount four bolt on2⅞˝ dia. x 1¾˝ wide 3⅜˝ x 2⅜˝ ctrs.

• Mounting height 3⅞˝ • Bolt holes 5/16˝ dia.• Load capacity 200 lbs. • Shpg. 3 lbs.

800-488-3407 Swivel Plate Casters 171&

4˝ x 15/16˝ SwivelPlate Caster

w/ Brake

ITEM 1-3428$3.99

• New, FAULTLESS swivel plate casterwheel brake. Solid “DYNA-TRED II” wheel.Zinc plated steel caster yoke.SPECIFICATIONS • Mounting height 4¾˝• Wheel size 4˝ x 15/16˝ • Mount 4 bolt 215/16˝ x 1¾˝• Load cap. for set 115 lbs. • Shpg. 1 lb.

3½˝ SwivelCaster

ITEM 1-1907$7.99• New. Ball bearing swivel caster. 3½˝diam. x 1¼˝ wide hard rubber wheel. 3¾˝ x4¼˝ mounting plate. 250 lb. capacity. 4½˝overall height. Shpg. 4 lbs.

3½˝ x 13/16˝Swivel PlateCasterITEM 1-3251$6.95• New, SUPERIOR CASTER swivel caster.Hard rubber tread on thermoplastic wheelwith ball bearings. Nylon bore insert.SPECIFICATIONS• Wheel size • Mounting height 4¾˝3½˝ dia. x 13/16˝ • Mount four bolts on

• Load capacity 170 lbs. 1¾˝ x 2⅞˝ to 3˝ ctrs.• Top plate • Bolt holes 5/16˝3⅝˝ x 2⅜˝ x 5/32˝ thick • Shpg. 3 lbs.

350 lb. DualWheelCaster

ITEM 1-1370$9.99• BASSICK. Dual 3½˝ diam. wheels. Eachwheel is 1˝ wide. Ball bearings with greasezerk on swivel. 3/16˝ thick plate. Weight cap.350 lbs. Size 4¾˝ x 7˝. Shpg. 6 lbs.

3˝ x 15/16˝ SwivelPlate Caster

w/Brake

ITEM 1-3445$3.99

• New, FAULTLESS swivel plate casterwith wheel lock. Solid polypropylene wheelwith plated steel yoke.SPECIFICATIONS• Wheel size 3˝ dia. x 15/16˝ • Mount four bolt on• Load capacity 110 lbs. 111/16˝ x 215/16˝ centers• Top plate 29/16˝ x 3⅝˝ • Bolt holes 5/16˝ diam.• Mounting height 3⅞˝ • Shpg. 1½ lbs.

3˝ x 1¼˝ SwivelPlate Caster

w/Brake

ITEM 1-3449$3.99

• New, FAULTLESS swivel plate casterwith wheel brake. Solid polypropylenewheel with plated steel caster yoke.SPECIFICATIONS• Wheel size 3˝ dia. x 1¼˝ • Mount four bolt on• Load capacity 270 lbs. 2⅜˝ x 37/16˝ centers• Top plate 3⅛˝ x 4⅛˝ • Bolt holes 5/16˝ diam.• Mounting height 313/16˝ • Shpg. 1½ lbs.

SwivelPlateCaster

ITEM 1-1545 $7.95• Used. Built for use under heavy officeequipment. Made by Bassick. Ball bearingswivel caster has dual 2½˝ diam. x ⅞˝ widewheels. Top plate is 9⅝˝ x 4⅞˝ of ¼˝ thicksteel. Four mounting holes on 7⅞˝ x 3˝ pat-tern. Weight capacity 220 lbs. Near newcondition. Shpg. 9 lbs.

40.5mm x 17mmSwivel PlateCasterITEM 1-331299¢• New, FAULTLESS swivel plate caster forfurniture. Polyurethane wheel. Brass finishyoke.SPECIFICATIONS• Wheel size 40.5mm x 17mm • Mount 4 bolt on• Load capacity 70 lbs. 26mm x 42mm ctrs.• Top plate 1½˝ x 2˝ x 3/32˝ • Bolt holes 7mm diameter• Mounting height 2˝ • Shpg. ¼ lb.

2˝ x ¾˝ SwivelPlate Caster

ITEM 1-3283$1.39• New, swivel plate caster with hard plasticwheel. Swivel plate has double-row ballbearings. Wheel has a plain bore.SPECIFICATIONS• Wheel size 2˝ x ¾˝ • Mount 4 holes on• Load capacity 50 lbs. 11/16˝ x 2¼˝ centers• Top plate 1¾˝ x 3˝ x ⅛˝ • Bolt holes ¼˝• Mounting height 213/16˝ • Shpg. ½ lb.

3˝ x 1⅜˝CasterSet

ITEM 1-3056 $7.99• Used, caster set includes two swivel andtwo rigid casters. Black hard plastic wheel.SPECIFICATIONS • Plate size 3¾˝ x 2¾˝• Wheel 3˝ dia. x 1⅜˝ wide • 4 bolt mount 3˝ x 1¾˝ ctrs.• Mounting height 3⅞˝ • Bolt hole 5/16˝ diam.• Set load capacity 200 lbs. • Shpg. 7 lbs.

4˝ x 2˝ SwivelPlateCaster

ITEM 1-3414$8.99• New MAXMORE caster. Phenolic wheelwith roller bearings. Grease zerks for bothswivel and wheel.SPECIFICATIONS• Wheel size 4˝ dia. x 2˝ • Mount 2⅝˝ x 3⅝˝• Load capacity 700 lbs. slotted to 3˝ x 3˝• Top plate 315/16˝ x 4½˝ • Bolt holes ⅜˝• Mounting height 5⅝˝ • Shpg. 5 lbs.

3˝ Rigid PlateCaster

ITEM 1-2991-R$1.59• New, SHEPERD general purpose rigidplate caster. Zinc plated body, polyolefinwheel.SPECIFICATIONS• Wheel 3˝ dia. x 1¼˝ wide • Mounting holes 13/16˝ x 3˝• Load capacity 210 lbs. • Mounting height 313/16˝• Top plate 2⅛˝ x 4¾˝ • Shpg. 1½ lbs.


80mm x 30mmSwivel BearingCasterw/Brake

ITEM 1-3448$3.99• New, RHOMBUS swivel bearing caster.Solid rubber tire on plastic wheel andplated steel yoke. Wheel and swivel lock.SPECIFICATIONS• Wheel size • Mounting height 110mm80mm diam. x 30mm • Mount 12.2mm dia. bolt hole

• Load cap. 80 Kg. (176 lbs.) • Shpg. 1 lb.

100mm x 32mmSwivel BearingCasterw/ Brake

ITEM 1-3464$5.99• New RHOMBUS swivel bearing casterwith wheel and swivel lock. Plated steelyoke. Rubber tire.SPECIFICATIONS• Wheel size 100mm diam. x 32mm (3.93˝ dia. x 1.26˝)• Load capacity 80 Kg. (176.37 lbs.)• Mounting height 129.5mm (5.09˝)˝• Mount bore ½˝ dia. • Shpg. 3 lbs.

125mm x 30mmSwivelBearingCasterw/Brake

ITEM 1-3466$5.99• New, RHOMBUS swivel bearing caster.Solid thermoplastic polyurethane tire onplastic wheel and plated steel yoke. Wheeland swivel lock.SPECIFICATIONS• Wheel size • Mtg. ht. 156mm (6.14˝)125mm dia. x 30mm • Mount 44mm dia. (1.73˝)

• Load cap. 100 kgs. (220 lbs.)Shpg. 1½ lbs.

5˝ x 1⅛˝ SwivelStem Caster

ITEM 1-1591$6.95• New. Ball bearing swivel stem caster with5˝ diam. x 1⅛˝ wide cushion rubber wheel.7/16˝ diam. x 1½˝ stem with retention ring.150 lb. capacity. Shpg. 4 lbs.

150mm x 32mmSwivel BearingCaster w/Brake

ITEM 1-3443$4.99• New, RHOMBUS swivel bearing caster.Solid rubber tire on steel wheel and platedsteel yoke. Wheel and swivel lock.SPECIFICATIONS• Wheel size • Mounting height 7⅛˝150mm diam. x 32mm • Mount 12.2mm bolt hole

• Load cap. 110 Kg. (242 lbs.) • Shpg. 4 lbs.

150mm x 32mmSwivel BearingCasterw/Brake

ITEM 1-3484$8.99• New RHOMBUS swivel bearing casterwith wheel and swivel lock. Plated steelyoke. Rubber tire.SPECIFICATIONS • Load cap. 120 Kg.• Wheel size • Mtg. height 180.5mm (7.1˝)150mm dia. x 32mm • Mount bore ½˝ dia.(5.9˝ dia. x 1.26˝) • Shpg. 4 lbs.

172 Swivel Stem Casters www.surpluscenter.com8

5˝ x 15/16˝ SwivelStem

Casterw/ Wheel Lock

ITEM 1-3307$5.99

• New FAULTLESS swivel stem caster withwheel lock. Thermoplastic tire on blackpolypropylene wheel.SPECIFICATIONS• Wheel size 5˝ x 15/16˝ • Mounting height 5¾˝• Load capacity 125 lbs. • Mount ½˝-13 x 1½˝• Stem threaded • Shpg. 1½ lbs.

4˝ x 1¼˝ SwivelStem Caster

w/ Brake

ITEM 1-3309$5.99

• New, FAULTLESS swivel stem casterwith wheel lock. Thermoplastic rubber tireon polypropylene wheel. Zinc plated steelyoke.SPECIFICATIONS• Wheel size 4˝ x 1¼˝ • Mounting height 5˝• Load capacity 250 lbs. • Mount ½-12 x 1½˝ thread• Threaded stem • Shpg. 2 lbs.

4¾˝ x 1˝ SwivelCasterw/ Swivel Lock

ITEM 1-3257$4.99• New, swivel caster rubber tire on plasticwheel. Chemical, water, salt and oil resistantnon-marking wheel. Plastic yoke with a 1⅛˝long metal insert where a bolt passes thruthe yoke and swivel. Two position swivellock, 180° offset. Shipped with the wheelunattached to yoke for easier installation.SPECIFICATIONS• Wheel size 4¾˝ dia. x 1˝ • Mounting height 6½˝• Mounting bore ½˝ diam. • Size 5⅞˝ x 6½˝ x 2¼˝• Load capacity 275 lbs. • Shpg. 2 lbs.

5˝ SwivelStemCaster

ITEM 1-2785$1.95• New, MHS brand caster. Soft rubber overplastic wheel for quiet, non-marking oper-ation. Ball bearings on swivel. Zinc platedsteel construction.SPECIFICATIONS • 5/16˝ diam. axle• 5˝ diam. x 15/16˝ w. wheel • 315/16˝ swivel radius• 125 lb. load capacity • 523/32˝ height• 7/16˝ diam. x 2˝ long (floor to base of stem)stem with grip ring • Shpg. 1½ lbs.

5˝ x 1½˝ SwivelStemCasterw/ Swivel & Wheel Lock

ITEM 1-3311$19.99• New, FAULTLESS swivel stem caster.Originally intended for scaffold. Swivel andwheel lock. Solid hard rubber wheel. Zincplated steel yoke.SPECIFICATIONS• Wheel size 5˝ x 1½˝ • Mounting height 6¼˝• Load capacity 325 lbs. • Mount 1˝ dia. x 2½˝• Stem friction grip stem • Shpg. 6 lbs.

125mm x 32mmDirectional LockStem Caster

ITEM 1-3482$7.99• New, RHOMBUS swivel stem caster.Solid rubber tire on steel wheel and platedsteel yoke. Downward pressure unlocks toallow swiveling. Thread guards on wheel.SPECIFICATIONS• Wheel 125mm x 32mm • Stem 1˝ dia. x 2⅛˝• Load capacity 220 lbs. w/4 tapped mtg. holes• Mounting height 6⅛˝ • Shpg. 3 lbs.

4˝ SwivelExpandableStem Caster

ITEM 1-3682$4.99• New, JARVIS swivel expandable caster.Rubber bushing expands inside of 1⅛˝ IDtubing with a nut beneath lower raceway.Zinc plated steel frame. Ball bearingswivel. Ball bearing axle with threadguards. PolyLoc wheel features a durablegrey polyurethane tread mechanicallylocked to a solid polyolefin wheel core.SPECIFICATIONS• Wheel size • Mounting height 415/16˝4˝ dia. x 1¼˝ wide • Expandable rubber adapter

• Load capacity 275 lbs. for 1⅛˝ ID tubing• Stem expandable • Shpg. 2 lbs.



w/Brake

ITEM 1-3380$3.99

• New, FAULTLESS swivel stem casterwith brake. Solid polypropylene wheel.Black oxide finish caster yoke.SPECIFICATIONS • Mounting height 3¾˝• Wheel size 3˝ x 1¼˝ • Stem ½˝-13 x 1˝ thread• Load capacity 270 lbs. • Shpg. 1½ lbs.


w/Brake

ITEM 1-3326$3.99

• New FAULTLESS swivel stem caster withbrake. Solid soft rubber wheel. Zinc platedsteel caster yoke.SPECIFICATIONS • Mounting height 3¾˝• Wheel size 3˝ x 1¼˝ • Stem ½˝-13 x 1˝ thread• Load capacity 175 lbs. • Shpg. 1½ lbs.


w/Brake

ITEM 1-3378$3.99

• New, FAULTLESS swivel stem casterwith brake. Solid polypropylene wheel.Zinc plated steel caster yoke.SPECIFICATIONS • Mounting height 3¾˝• Wheel size 3˝ x 1¼˝ • Stem ½˝-13 x 1˝ thread• Load capacity 270 lbs. • Shpg. 1½ lbs.

3˝ x 13/16˝ SwivelStemCaster

ITEM 1-3310$3.99• New, FAULTLESS swivel stem caster.Thermoplastic tire on black polypropylenewheel.SPECIFICATIONS• Wheel size 3˝ x 13/16˝ • Mounting height 3⅝˝• Load capacity 90 lbs. • Mount ⅜˝-16 x 1½˝• Stem threaded • Shpg. 1½ lbs.

2˝ Stem SwivelCaster

w/Brake

ITEM 1-3234$2.99

• New, BOND stem caster. Semi-steelwheel (cast iron enriched with steel) hasplain bore.SPECIFICATIONS • Stem ⅜˝-16 x 1˝ long• Wheel size 2˝ dia. x 3/4˝ • Mtg. ht. 4˝ to end of stem• Load capacity 250 lbs. • Shpg. 2 lbs.

800-488-3407 Swivel Stem Casters 173&

Stem Casters• New. Use on carts,chairs, TV stands, hun-dreds more uses.

ITEM 1-1222 29¢ ea.• 1¼˝ diam. wheel, ball swivel, ¼˝ diam.stem. Shpg. ½ lb. ea.

ITEM 1-1223 32¢ ea.• 1⅝˝ diam. wheel, ¼˝ diam. stem. Shpg.¼ lb. ea.


ITEM 1-3226$6.99• New, ER WAGNER swivel stem caster.Polyurethane wheel with ball bearing andthread guards.SPECIFICATIONS • Stem ⅜-16 thread 1˝ long• Wheel size 3˝ dia. x 1¼˝ • Mounting height 4¼˝• Load capacity 210 lbs. • Shpg. 2 lbs.


ITEM 1-3329$2.99• New, FAULTLESS swivel stem caster.Solid hard rubber wheel. Zinc plated steelcaster yoke.SPECIFICATIONS • Mounting height 3¾˝• Wheel size 3˝ x 1¼˝ • Stem ½˝-13 x ¾˝ thread• Load capacity 270 lbs. • Shpg. 1½ lbs.

3˝ dia. x 1¼˝ Casters• New, Faultless 3˝ dia.x 1¼˝ casters. All have ball bearing swivels with ½˝-13 threadedstem mount and 3¾˝ mounting height. Choose from a wide variety of wheel construction,yoke material ,stem length and brake details. Shpg. 1½ lbs. each.

No Friction RollockBrake Brake Brake

$2.99 ea. $3.99 ea. $3.99 ea.Wheel Load

Height Construction Frame Rating ITEM ITEM ITEM¾˝ Dyna Tred TPR Gray Zinc Plated 180 lbs. 1-3346¾˝ Dyna Tred TPR Gray Black Oxide 180 lbs. 1-3383 1-3412¾˝ Soft Rubber on Plastic Wheel Black Oxide 175 lbs. 1-3339 1-3335¾˝ Solid Soft Rubber Zinc Plated 175 lbs. 1-3328 1-3409¾˝ Solid Soft Rubber Black Oxide 175 lbs. 1-3341¾˝ Solid Hard Rubber Zinc Plated 270 lbs. 1-3334¾˝ Solid Polypropylene Zinc Plated 270 lbs. 1-3405¾˝ Solid Polypropylene Black Oxide 270 lbs. 1-3381 1-33791˝ Dyna Tred TPR Gray Zinc Plated 180 lbs. 1-3347 1-33771˝ Soft Rubber on Plastic Wheel Black Oxide 175 lbs. 1-33401˝ Solid Soft Rubber Zinc Plated 175 lbs. 1-3336 1-33271˝ Solid Polypropylene Zinc Plated 270 lbs. 1-3332 1-3345 1-33331˝ Solid Polypropylene Black Oxide 270 lbs. 1-3342 1-3338 1-34061½˝ Dyna Tred TPR Gray Zinc Plated 180 lbs. 1-3375 1-3408 1-33761½˝ Soft Rubber on Plastic Wheel Black Oxide 175 lbs. 1-3363 1-33441½˝ Solid Soft Rubber Zinc Plated 175 lbs. 1-3331 1-33301½˝ Solid Polypropylene Zinc Plated 270 lbs. 1-3410 1-3325 1-33431½˝ Solid Polypropylene Black Oxide 270 lbs. 1-3337 1-3407 1-3411

Zinc plated, friction brake,solid polypropylene

Black oxide, rollock brake,solid soft rubber

Zinc plated, Zinc plated,solid hard rubber Dyna Tred

Floor Lock

ITEM 1-3602$29.99• New, Model 5X933. Gives positive brak-ing to prevent castered equipment fromrolling. Non-slip rubber 4˝ dia. pad holdssecurely to floor. Step on pedal to apply,tap toe bar to release. Use with 4˝ dia.casters.SPECIFICATIONS• Extended height 5⅜˝ • Mtg. pattern 2⅝˝ x 3⅝˝• Retracted height 4⅝˝ • Bolt holes ⅜˝ dia.• Max. capacity 1000 lbs. • Toe bar ⅜˝ dia. x 8˝• Top plate 5˝ x 5½˝ x ⅜˝ • Shpg. 9 lbs.

Grip Ring Caster Sockets• Brand new, use to mount grip ring casters into 16 gauge steel tubing.

For caster stem dia. 7/16˝. Overall length 1½˝. Shpg. 1/10 lb.

For ¾˝ O.D. 16 Gauge Tubing

ITEM 1-3668 50¢SPECIFICATIONS• Tubing size ¾˝ OD • Outside dia. 0.66˝

For 1˝ O.D. 16 Gauge Tubing

ITEM 1-3667 50¢SPECIFICATIONS• Tubing size 1˝ OD • Outside dia. 0.91˝

174 Grip Ring Stem Casters & Sockets www.surpluscenter.com8

Wheel Stem Stem Wheel Mounting LoadITEM Dia. Width Dia. Length Construction Brake Frame Height Rating Shpg. Price

1-3373 2½˝ 13/16˝ 7/16˝ 1⅜˝ Solid Hard Rubber No Zinc Plated 3˝ 80 lbs. 1 lb. $1.991-3357 3˝ 13/16˝ 7/16˝ 1⅜˝ Dyna Tred II Black Yes Zinc Plated 3½˝ 90 lbs. 1½ lbs. $2.991-3353 3˝ 13/16˝ 7/16˝ 1⅜˝ Dyna Tred II Gray No Zinc Plated 3½˝ 90 lbs. 1 lb. $1.991-3370 3˝ 13/16˝ 7/16˝ 1⅜˝ Dyna Tred TPR Black No Zinc Plated 3½˝ 90 lbs. 1½ lbs. $1.991-3354 3˝ 13/16˝ 7/16˝ 2˝ Solid Rubber Yes Zinc Plated 3⅝˝ 90 lbs. 1 lb. $2.991-3306 3˝ 1¼˝ 7/16˝ 1⅜˝ Solid hard rubber Yes Zinc Plated 3¾˝ 270 lbs. 2 lbs. $3.991-3356 3˝ 1¼˝ 7/16˝ 1⅜˝ Soft rubber on plastic wheel Yes Black Oxide 3¾˝ 175 lbs. 1½ lbs. $2.991-3355 3˝ 1¼˝ 7/16˝ 1⅜˝ Solid Polypropylene Yes Zinc Plated 3¾˝ 270 lbs. 1½ lbs. $3.991-3352 3˝ 1¼˝ 7/16˝ 1⅜˝ Soft rubber on plastic wheel Yes Black Oxide 3¾˝ 175 lbs. 1½ lbs. $2.991-3351 3˝ 1¼˝ 7/16˝ 1⅜˝ Solid Polypropylene No Black Oxide 3¾˝ 270 lbs. 1½ lbs. $1.991-3350 3˝ 1¼˝ 7/16˝ 1⅜˝ Solid Polypropylene No Zinc Plated 3¾˝ 270 lbs. 1½ lbs. $2.991-3348 3˝ 1¼˝ 7/16˝ 1⅜˝ Solid Soft Rubber No Zinc Plated 3¾˝ 175 lbs. 1½ lbs. $1.991-3359 3˝ 1¼˝ 7/16˝ 1⅜˝ Dyna Tred II Gray Yes Zinc Plated 3¾˝ 180 lbs. 1½ lbs. $1.991-3358 3˝ 1¼˝ 7/16˝ 1⅜˝ Dyna Tred II Gray No Zinc Plated 3¾˝ 180 lbs. 1½ lbs. $1.991-3374 3˝ 1¼˝ 7/16˝ 1⅜˝ Dyna Tred TPR Black Yes Black Oxide 3¾˝ 180 lbs. 1½ lbs. $2.991-3371 3˝ 1¼˝ 7/16˝ 1⅜˝ Dyna Tred TPR Black No Black Oxide 3¾˝ 180 lbs. 1½ lbs. $1.991-3368 3˝ 1¼˝ 7/16˝ 1⅜˝ Dyna Tred TPR Gray Yes Zinc Plated 3¾˝ 180 lbs. 1½ lbs. $2.991-3401 3˝ 1¼˝ 7/16˝ 1⅜˝ Solid Polypropylene Yes Black Oxide 3½˝ 270 lbs. 1½ lbs. $2.991-3389 3˝ 1¼˝ 7/16˝ 1⅜˝ Solid Polypropylene Yes Black Oxide 3½˝ 270 lbs. 1½ lbs. $2.991-3388 3˝ 1¼˝ 7/16˝ 1⅜˝ Solid Soft Rubber Yes Zinc Plated 3½˝ 175 lbs. 1½ lbs. $2.991-3386 3˝ 1¼˝ 7/16˝ 1⅜˝ Solid Soft Rubber Yes Zinc Plated 3½˝ 175 lbs. 1½ lbs. $2.991-3362 4˝ 15/16˝ 7/16˝ 1⅜˝ Dyna Tred II Gray Yes Zinc Plated 4⅝˝ 115 lbs. 1½ lbs. $3.991-3361 4˝ 15/16˝ 7/16˝ 1⅜˝ Dyna Tred II Black Yes Zinc Plated 4⅝˝ 115 lbs. 1½ lbs. $4.991-3372 4˝ 15/16˝ 7/16˝ 1⅜˝ Dyna Tred TPR Gray No Zinc Plated 4⅝˝ 115 lbs. 1½ lbs. $2.991-3366 4˝ 15/16˝ 7/16˝ 1⅜˝ Solid Soft Rubber No Zinc Plated 4⅝˝ 115 lbs. 1½ lbs. $2.991-3367 4˝ 15/16˝ 7/16˝ 2˝ Dyna Tred TPR Gray Yes Zinc Plated 4⅝˝ 115 lbs. 1½ lbs. $3.991-3415 4˝ 15/16˝ 7/16˝ 2˝ Dyna Tred TPR Gray Yes Zinc Plated 4⅝˝ 115 lbs. 1½ lbs. $3.991-3402 4˝ 1¼˝ 7/16˝ 1⅜˝ Polyurethane on Polypropylene No Black Plastic 5½˝ 300 lbs. 2 lbs. $3.991-3393 4˝ 1¼˝ 7/16˝ 1⅜˝ Polyurethane on Polypropylene No Gray Plastic 5½˝ 300 lbs. 2 lbs. $3.991-3391 4˝ 1¼˝ 7/16˝ 1⅜˝ Polyurethane on Polypropylene Dual Gray Plastic 5½˝ 300 lbs. 2 lbs. $3.991-3349 5˝ 15/16˝ 7/16˝ 1⅜˝ Dyna Tred II Black No Zinc Plated 5⅝˝ 125 lbs. 1½ lbs. $2.991-3360 5˝ 15/16˝ 7/16˝ 1⅜˝ Dyna Tred II Gray Yes Zinc Plated 5⅝˝ 125 lbs. 1½ lbs. $3.991-3385 5˝ 15/16˝ 7/16˝ 1⅜˝ Dyna Tred TPR Gray Yes Zinc Plated 5⅞˝ 125 lbs. 1½ lbs. $3.991-3387 5˝ 15/16˝ 7/16˝ 1⅜˝ Dyna Tred TPR Black Yes Zinc Plated 5¾˝ 125 lbs. 1½ lbs. $3.991-3384 5˝ 1¼˝ 7/16˝ 1⅜˝ Dyna Tred TPR Gray Dual Zinc Plated 6½˝ 300 lbs. 3 lbs. $4.99

Faultless Grip Ring Stem Casters• New, FAULTLESS grip ring stem casters. All have ball bearing swivels. Choosefrom a wide variety of wheel construction, yoke material and with or without brakes.

• Dual brakes lock both the swivel and wheel

• Dyna Tred II and TPR are thermoplastic rubber on polypropylene wheel

5˝ x 2˝Wheel

ITEM 1-3503$1.99• New, solid plastic wheel. Centered hub.SPECIFICATIONS • Bore ½˝ smooth• Diameter 5˝ • Hub width 23/16˝• Width 2˝ • Shpg. ½ lb.

2½˝ x 13/16˝ SolidRubber WheelITEM 1-373279¢• New, JARVIS wheel. Black solid rubberwheel.SPECIFICATIONS • Bore thru-length 15/16˝• Size 2½˝ dia. x 13/16˝ w. • Bearing Delrin• Load capacity 80 lbs. • Hub centered• Bore ¼˝ diam. • Shpg. ½ lb.

2½˝ x 1¼˝ SolidRubber WheelITEM 1-373379¢• New, JARVIS wheel. Gray solid rubberwheel.SPECIFICATIONS • Bore thru-length 1½˝• Size 2½˝ dia. x 1¼˝ w. • Bearing Delrin• Load capacity 140 lbs. • Hub centered• Bore ½˝ diam. • Shpg. 1 lb.

3˝ x 1¼˝ SoftRubber WheelITEM 1-367979¢• New, JARVIS soft grey rubber wheel withDelrin bearing.SPECIFICATIONS • Bore thru-length 113/32˝• Size 3˝ dia. x 1¼˝ wide • Bearing Delrin• Load capacity 150 lbs. • Hub centered• Bore ½˝ diam. • Shpg. 1 lb.

3˝ x 15/16˝ SoftRubber WheelITEM 1-367889¢• New, JARVIS soft rubber wheel with ballbearing.SPECIFICATIONS • Bore thru-length 13/16˝• Size 3˝ dia. x 15/16˝ wide • Bearing ball• Load capacity 125 lbs. • Hub centered• Bore 5/16˝ diam. • Shpg. 1 lb.

4˝ x 15/16˝ RubberWheelITEM 1-367459¢• New, JARVIS wheel. Cushion thermo-plastic rubber grey tread bonded to a light-weight yet extremely durable polyolefinwheel core. Plain bearing.SPECIFICATIONS • Bore thru-length 17/32˝• Size 4˝ diam. x 15/16˝ wide • Bearing none• Load capacity 125 lbs. • Hub centered• Bore 5/16˝ diam. • Shpg. 1 lb.

5˝ x 1¼˝ RubberWheelITEM 1-373689¢• New, JARVIS wheel. Gray thermoplasticrubber round tread bonded to polyolefinwheel. Protective thread guards.SPECIFICATIONS • Bore thru-length 1⅝˝• Size 5˝ dia. x 1¼˝ wide • Bearing ball• Load capacity 250 lbs. • Hub centered• Bore ⅜˝ diam. • Shpg. 1 lb.

5˝ x 1¼˝RubberWheelITEM 1-3672$1.29• New, JARVIS wheel. Thermoplastic rubberblue tread permanently bonded to a ruggedpolyolefin wheel core. Delrin bearing.SPECIFICATIONS • Bore thru-length 1½˝• Size 5˝ dia. x 1¼˝ wide • Bearing Delrin• Load capacity 250 lbs. • Hub centered• Bore ½˝ diam. • Shpg. 1 lb.

800-488-3407 Caster Wheels 175&

5˝ x 1⅜˝ReplacementWheelITEM 1-3444$5.99• New, FAULTLESS replacement casterwheel. Rubber tire with plastic wheel.Bearing pressed into hub.SPECIFICATIONS • Bore ⅜˝ diam. smooth• Wheel size 5˝ x 1⅜˝ • Shpg. 1 lb.

4˝ x 15/16˝WheelITEM 1-348950¢• New, solid hard rubber, with plastic boreinsert utility wheel. Centered hub.SPECIFICATIONS • Bore 5/16˝• Diameter 4˝ • Hub width 13/16˝• Width 15/16˝ • Shpg. 1 lb.

5˝ x 15/16˝Caster WheelITEM 1-326675¢• New, SHEPHERD Model WH0.50X 1.00 -SFR1 caster wheel. Soft, non-marking rubber(75A durometer) maximizes floor pro tec tionand provides quiet, cushioned ride.SPECIFICATIONS• Size 5˝ O.D. x 15/16˝ width • Hub width 1.15˝• Load capacity 130 lbs. • Bore 5/16˝• No bearings • Shpg. 2 lbs.

3½˝ x 1¼˝WheelITEM 1-318249¢• New, plastic utility wheel with ribbed rub-ber tire. Offset hub (⅛˝)SPECIFICATIONS • Bore 5/16˝• Diameter 3½˝ • Hub width 1¼˝• Width 1¼˝ • Shpg. ½ lb.

You can see all these casters andwheels and much, much more at

our showroom!1015 West “O” Street, Lincoln, NE

Mon - Fri 8 - 5 Sat 8-Noon

3˝ CasterWheel

ITEM 1-3172-A$2.49• New, hard rubber caster wheel with rollerbearing hub. (Dust covers must bemounted with lip facing outward.)SPECIFICATIONS • Bearing size• Outside diam. 3˝ ¾˝ ID x 13/16˝ wide• Tread width 17/16˝ • Load capacity 250 lbs.• Hub width 1⅝˝ • Shpg. 1 lb.

6˝ x 1¼˝RubberWheels

$1.29 each• New, JARVIS wheels. Grey thermoplasticrubber tread permanently bonded to arugged polyolefin wheel core.SPECIFICATIONS • Bore thru-length 1⅝˝• Size 6˝ dia. x 1¼˝ wide • Bearing ball• Load capacity 300 lbs. • Hub centered• Bore ⅜˝ diam. • Shpg. 1 lb.

ITEM 1-3675 Square edge wheel.

ITEM 1-3739 Round edge wheel.

6˝ x 1¼˝PolyurethaneWheels

• New, JARVIS polyurethane wheelsbonded to polyolefin wheel.SPECIFICATIONS• Size 6˝ dia. x 1¼˝ wide • Bore thru-length 1½˝• Load capacity 350 lbs. • Hub centered• Bore ½˝ diam. • Shpg. 1½ lbs.

ITEM 1-3737 $1.29• Blue tread. Delrin bearing.

ITEM 1-3738 $1.29• Gray tread. Ball bearing.

Roller Strip

ITEM 1-2940 $2.95• New, 15 nylon rollers mounted in alu-minum channel. Ideal for light materialhandling. Each roller is ¾˝ diam. x 1˝ withslight crown. 13 are removable and 2 areriveted into place. Channel is 15⅜˝ x 1¼˝ x¾˝. Adhesive foam mounting tape on back.15/16˝ mounting height. Shpg. 1 lb.

12 VDC Winches

• Brand new WOOD POWER. Remoteswitch with clamp mount for power in andout operation with 6 ft. cord. Cam actionclutch for free spooling. Automatic brakingaction. Pulley block included. Four rollerfairlead and mounting plate sold separately.

2000 lbs.ITEM 3-1027 $119.95SPECIFICATIONS • 10.5 FPM & 10 amps• Model WW2000V12 at no load (first layer)• 2000 lbs. max. line-pull • 4.2 FPM & 90 amps• 0.85 HP at full load (first layer)• 12 VDC • Size 11¼˝ x 4⅛˝ x 4⅛˝• 49 ft. of 5/32˝ cable w/hook • Shpg. 18 lbs.

3000 lbs.ITEM 3-1028 $189.95SPECIFICATIONS • 9.5 FPM & 10 amps• Model WW3000V12 at no load (first layer)• 3000 lb. max. line-pull • 1.3 FPM & 150 amps• 1.34 HP at full load (first layer)• 12 VDC • Size 12¾˝ x 4⅛˝ x 4½˝• 45.9 ft. of 3/16˝ cable w/hook • Shpg. 21 lbs.

176 Wood Power Winches www.surpluscenter.com8

12 VDC Winches

• Brand new WOOD POWER. Hand heldcontroller for power in and out operationwith 10 ft. cord. Free spooling clutch. Au-tomatic braking action. Three stage plan-etary gear. Four roller fairlead andmounting plate sold separately.

8000 lbs.ITEM 3-1013 $449.95SPECIFICATIONS • 13 FPM & 30 amps• Model WWX8000V12 at no load (first layer)• 8000 lb. max. line-pull • 4.6 FPM & 350 amps• 2.2 HP at full load (first layer)• 12 VDC • Size 2015/16˝ x 7⅛˝ x 10⅝˝• 95 ft. of 5/16˝ cable w/hook • Shpg. 72 lbs.

10,000 lbs.ITEM 3-1014 $674.95SPECIFICATIONS • 17 FPM & 80 amps• Model WWX10000V12 at no load (first layer)• 10000 lb. max. line-pull • 4.5 FPM & 320 amps• 4 HP at full load (first layer)• 12 VDC • Size 227/16˝ x 7⅛˝ x 10⅝˝• 85 ft. of ⅜˝ cable w/hook • Shpg. 88 lbs.

Hitch Receiver PortableWinchMount

ITEM 3-1023 $99.95• Brand new. Compatible with Wood Power5000, 8000 and 10,000 lbs. winches.Mounts in 2˝ receiver. Shpg. 30 lbs.

12 VDC Winches

• Brand new WOOD POWER. Hand heldcontroller for power in and out operationwith 10 ft. cord. Free spooling clutch. Au-tomatic braking action. Four roller fairleadand mounting plate sold separately.

12,000 lbs.ITEM 3-1015 $937.95SPECIFICATIONS • 15 FPM & 60 amps at• Model WW12000V12 no load (first layer)• 12000 lb. max. line-pull • 5.6 FPM & 310 amps• 4 HP at full load (first layer)• 12 VDC • Size 22⅞˝ x 8⅛˝ x 99/16˝• 92 ft. of 7/16˝ cable w/hook • Shpg. 185 lbs.

Ships UPS in multiple boxes

15,000 lbs.ITEM 3-1016 $1087.95SPECIFICATIONS • 15 FPM & 60 amps at• Model WW15000V12 no load (first layer)• 15000 lb. max. line-pull • 4.3 FPM & 330 amps• 4.5 HP at full load (first layer)• 12 VDC • Size 22⅞˝ x 8⅛˝ x 99/16˝• 92 ft. of 7/16˝ cable w/hook • Shpg. 185 lbs.

Ships UPS in multiple boxes

Camouflaged 12 VDCWinches

• Brand new WOOD POWER. Camou flagedwith “Mossy Oak” break-up pattern. Remoteswitch with clamp mount for power in andout operation with 6 ft. cord. Cam actionclutch for free spooling. Automatic brakingaction. Pulley block included. Four roller fair-lead and mounting plate included. Mountingplate connects the fairlead to the winch.

3000 lbs.ITEM 3-1011 $249.95SPECIFICATIONS • 9.5 FPM & 10 amps• Model WWMO3000V12BU at no load (first layer)• 3000 lb. max. line-pull • 1.3 FPM & 150 amps• 1.34 HP at full load (first layer)• 12 VDC • Size 12¾˝ x 4⅛˝ x 4½˝• 45.9 ft. of 3/16˝ cable w/hook • Shpg. 26 lbs.

5000 lbs.12 VDCWinch

ITEM 3-1012 $374.95• Brand new WOOD POWER. Hand heldcontroller for power in and out operationwith 10 ft. cord. Free spooling clutch. Au-tomatic braking action. Three stage plan-etary gear. Four roller fairlead andmounting plate sold separately.SPECIFICATIONS • 12 FPM & 45 amps• Model WW5000V12 at no load (first layer)• 5000 lb. max. line-pull • 5 FPM & 230 amps• 1.8 HP at full load (first layer)• 12 VDC • Size 1715/16˝ x 7⅛˝ x 10⅝˝• 79 ft. of ¼˝ cable w/hook • Shpg. 52 lbs.

Four Way Roller Fairleads• Brand new, four way roller fairlead. Amounting plate ( sold separately) is re quiredto connect the roller fairlead to the winch.

ITEM 3-1017-R $15.95• For ITEMS 3-1008, 3-1010, 3-1011, 3-1027 and 3-1028 winches. Shpg. 3 lbs.

ITEM 3-1018-R $29.95• For ITEM 3-1012 winch. Shpg. 8 lbs.

ITEM 3-1019-R $39.95• For ITEMS 3-1013 and 3-1014 winches.Shpg. 11 lbs.

ITEM 3-1020-R $49.95• For ITEMS 3-1015 and 3-1016 winches.Shpg. 14 lbs.

Winch Mounting Plates• Brand new, steel mounting plates. Themounting plate connects the roller fairleadto the winch.

ITEM 3-1017-M $15.95• For ITEMS 3-1008, 3-1010, 3-1011, 3-1027and 3-1028 winches and fairleads. Shpg. 3 lbs.

ITEM 3-1018-M $15.95• For ITEM 3-1012 winch and fairleads.Shpg. 17 lbs.

ITEM 3-1019-M $39.95• For ITEMS 3-1013 and 3-1014 winchesand fairleads. Shpg. 25 lbs.

ITEM 3-1020-M $49.95• For ITEMS 3-1015 and 3-1016 winchesand fairleads. Shpg. 33 lbs.

Heavy Duty Snatch BlocksITEM 3-1021-4 $12.95SPECIFICATIONS• 4 Ton max. capacity • 1½˝ dia. attachment hole• Pulley 2⅜˝ O.D. • Shpg. 3 lbs.

ITEM 3-1021-8 $24.95SPECIFICATIONS• 8 Ton max. capacity • 3˝ diam. attachment hole• Pulley 4˝ O.D. • Shpg. 9 lbs.

Winches, hoists, cable and chain in this catalog are not designed or sold for use in lifting humans inany manner. They are used for pulling only and should never be used for vertical lifting.

800-488-3407 Ramsey Winches 177&

8000 lbs. HydraulicWinch

ITEM 3-985$1039.95

• Brand new RAMSEY H200. Low mountworm gear winch. Ideal for wreckers,trucks, roll back car haulers, etc. Ram-Lok® clutch. Char-Lynn hydraulic motor.SPECIFICATIONS• 8000 lbs. (1st layer) • Ports ½˝ NPT• 4500 lbs. (5th layer) • 15 GPM max.• Cable speed • 1500 PSI max.12.6-22 FPM max. • Drum size 7¼˝ dia. x 11⅜˝

• Drum cap. 190 ft. ⅜˝ cable • Size 36˝ x 17¾˝ x 10˝• 60:1 gear ratio • Shpg. 120 lbs.

9000 lb., 12 VDC Winch

ITEM 3-984 $1339.95• Brand new RAMSEY. Industrial wormgear 12 VDC winch for heavy duty appli-cations. Ram Lok® clutch.SPECIFICATIONS • 65-310 amps• 12 VDC • Drum cap. 190 ft. ⅜˝ cable• 9000 lbs. line pull • 12 ft. (remote control)• 470:1 gear ratio • Size 36˝ x 11˝ x 10¼˝• Cable speed 2½-14 FPM • Shpg. 130 lbs.

20,000 lbs. Hydraulic Winch

ITEM 3-986 $3634.95• Brand new RAMSEY H800. Low mountworm gear hydraulic winch. Dow-Lok®

lever clutch worm gear brake. Char-Lynnhydraulic motor.SPECIFICATIONS• 20,000 lbs. (1st layer) • Ports SAE 12• 11,000 lbs. (5th layer) • 30 GPM max.• Cable speed • 2400 PSI max.18-33 FPM max. • Drum size 12˝ dia. x 15˝

• Drum cap. 240 ft. ⅝˝ cable • Size 52˝ x 30˝ x 15˝• 40:1 gear ratio • Shpg. 410 lbs.

Truck freight only.

9500 lbs.12 VDCWinch

ITEM 3-991 $1049.95• Brand new RAMSEY Patriot Series. 3stage planetary gear system for fast linespeeds. Heavy duty 4.8 HP motor forlonger operating duty. Automatic loadholding brake. Cam action clutch for freespooling of cable. Roller fairlead. 12 ft. re-mote control.SPECIFICATIONS• 9500 lbs. • Cable speed 7.8-35.4 FPM• 5.5 HP motor • 105 ft. 5/16˝ cable w/hook• 12 volt DC • Size 22⅝˝ x 6⅛˝ x 10˝• 430 amps • Shpg. 105 lbs.

8000 lb. HydraulicWinch

ITEM 3-965 $1176.95• Brand new RAMSEY. Powerful hydraulicmotor operated winch that provides theperformance needed for industrial winch-ing applications. Planetary gearbox pro-vides rapid cable speed. Oil disc brake.Hand clutch for freespooling.HYDRAULIC SYSTEM REQUIREMENTS• 15 GPM at 2500 PSI• 4 way cylinder spool valve with relief valve• 10 micron filterSPECIFICATIONS• 8000 lbs. (1st layer)• Cable speed 50 FPM at 15 GPM (1st layer)• Drum capacity 170 ft. of ⅜˝ cable• Drum size 9¾˝ between flanges, 4˝ diam. drum,8¼˝ diam. flange

• Size 23½˝ x 8½˝ x 8¾˝• Shpg. 94 lbs.

ITEM 3-979 $1444.95• Same as ITEM 3-965 above except10,000 lbs., 32 FPM line speed. Drum ca-pacity 115 ft. of 7/16˝ cable. Size 27½˝ x 8½˝x 8¾˝. Shpg. 96 lbs.

Ramsey Winches

• Brand new RAMSEY REP Series. Threestage planetary gear system for fast linespeeds. Automatic load holding brake.Cam action clutch for free spooling. Rollerfairlead. 12 ft. remote control.5000 lbs.ITEM 3-981 $729.95SPECIFICATIONS• 5000 lbs. • Cable speed 5-15 FPM• 1.3 HP motor • 80 ft. ¼˝ cable w/hook• 12 volt DC • Size 16⅞˝ x 6˝ x 6⅜˝• 230 amps • Shpg. 65 lbs.8000 lbs.ITEM 3-982 $895.95SPECIFICATIONS• 8000 lbs. • Cable speed 6-18 FPM• 3.6 HP motor • 95 ft. 5/16˝ cable w/hook• 12 volt DC • Size 20⅞˝ x 6˝ x 6⅜˝• 420 amps • Shpg. 80 lbs.9000 lbs.ITEM 3-989 $1019.95SPECIFICATIONS• 9000 lbs. • Cable speed 8-33 FPM• 4.8 HP motor • 95 ft. 5/16˝ cable w/hook• 12 volt DC • Size 22⅝˝ x 6⅛˝ x 6⅜˝• 420 amps • Shpg. 97 lbs.

15,000 lbs. RamseyPatriot Winch

w/ 12 ft.RemoteControl

ITEM 3-1025 $1597.95• Brand new, RAMSEY Patriot 15000 12Volt DC winch. Features series woundmotor and 3 stage planetary geartrain forstrong line pull with high speed. Hand-held remote with 12 ft. cord. Automaticload holding brake. Power in and outwith manual clutch for free-wheeling.Furnished winch cable, battery cablesand roller fairlead.SPECIFICATIONS • Gear ratio 251:1• Rated line pull 15,000 lbs.• Cable 90 ft. of 7/16˝• Battery voltage 12 DC 6x25 wire rope w/hook• Motor 5.5 HP series wound• Drum size 3½˝ dia x 8˝• Current draw 94-460 amps• Size 24½˝ x 8½˝ x 11˝• Line speed 24.9-3.9 ft/min • Shpg. 143 lbs.

12,000 lbs. 12 VDCWorm Gear Winch

ITEM 3-990$1483.95• Brand new RAMSEY RE Series. Worm geardesign provides load reversing protection.Ram LokTM clutch disengages for free spool-ing. Roller fairlead. 12 ft. remote control.SPECIFICATIONS• 12,000 lbs. • Cable speed 3.3-16 FPM• 4.8 HP motor • 100 ft. ⅜˝ cable w/hook• 12 volt DC • Size 22˝ x 10¾˝ x 10¼˝• 380 amps • Shpg. 140 lbs.

Winches, hoists, cable and chainin this catalog are not designed orsold for use in lifting humans inany manner. They are used for

pulling only and should never beused for vertical lifting.

Heavy Duty Fold-DownSeatWith Armrests &Lumbar Support

ITEM 1-3752 $221.95• Brand new, SEAT SOLUTIONS Model44002BK steel frame and black heavy dutyvinyl cover, ZTR or skid steer seat. 3 posi-tion lumbar support. Adjustable tilt backcan be reclined or folded down. Lever con-trols seat to slide forward and backwards.Adjustable arm rests.SPECIFICATIONS• Mounting bolt pattern (width x depth)Adjustable width 7˝ to 13.5˝Slotted slides allow for variable depth spacingMaximum depth 13˝

• Size 24˝ x 20˝ x 26˝• Actual weight 40 lbs. • Shpg. 58 lbs. (oversize)

Ultra High BackSeatwith Slides

ITEM 1-3751$126.95• Brand new, SEAT SOLUTIONS Model46000BK high-back seat. Heavy duty vinylcover. Ideal replacement for skid steers.Also for commercial turf, utility vehicles,forklifts, loaders, backhoes and other con-struction equipment. Spring loaded lever tolock seat slide. Steel pan, drain hole. Ac-cepts operator presence switch.SPECIFICATIONS• Bolt pattern9˝ x 11.5˝ 10.25˝ x 11.5˝10.63˝ x 11˝ 11.25˝ x 11.5˝

• Bolt pattern with slides (width x depth)8˝ x 11⅛˝ 9½˝ x 11⅛˝ 11¼˝ x 11⅛˝

• Size 22.5˝ x 18.9˝ x 22.5˝• Actual weight 26 lbs. • Shpg. 58 lbs. (oversize)

Variable DisplacementAxial Piston Pumps

ITEM 9-8238-L ITEM 9-8238-RRepresents Left Hand DDC Shaft Location Represents Right Hand DDC Shaft Location

• New, WHITE HYDRAULICS KP Series variable displacement axial piston pump to op-erate hydraulic wheel motors on zero turn radius equipment applications including turf,light construction and other mobile equipment.• Features include die cast aluminum body with built-in cooling fins, roller bearing supportfor piston group, bronze coated wear plate, built-in bypass reliefs, charge pump and by-pass valve for free-wheeling equipment.• Left and Right hand pumps are determined by the location of the DDC (Direct Displace-ment Control) shaft when looking at the side of the pump with the work ports and theinput shaft facing down. Suitable for belt or direct drive.

Displ. 0.62 cu. in.SPECIFICATIONS FOR ALL• Disp. 0.62 cu. in. (10 cc) • Mount SAE A 2 bolt • Inlet port SAE 6• Pump type variable piston • DDC shaft 0.47˝ (12mm) dia. • Work ports SAE 8• PSI 1425 cont., 2125 int., 3500 peak w/dual flats and crosshole • Drain port SAE 6• RPM 600 min., 3600 max. • Rqd. filtration 20 Micron • Size 6⅛˝ x 4¾˝ x 5˝• 8.7 GPM at 3600 RPM (fully stroked) • Oil 10cSt (60 SUS) viscosity • Shpg. 10 lbs.

DDC ShaftITEM Model Rot. Location Shaft Price9-8233 101010000025 CW Right 19mm dia. x 5/16˝ tang $79.999-8234 101010000011 CCW Left ⅝˝ dia. 19T spline x 1¼˝ $109.999-8240 * 101010000029 CCW Right 15mm x 2˝ w/keyway $109.999-8243 101010000022 CW Left 15mm x 2˝ w/keyway $109.999-8269 101010000012 CW Right ⅝˝ dia. 19T spline x 1¼˝ $109.99* Return to neutral spring loaded lever mounted on DDC shaft. Size is 6⅛˝ x 7˝ x 5˝.

Displ. 0.79 cu. in.SPECIFICATIONS FOR ALL• Disp. 0.79 cu. in. (13 cc) • Mount SAE A 2 bolt • Inlet port SAE 6• Pump type variable piston • DDC shaft 0.47˝ (12mm) dia. • Work ports SAE 8• PSI 1425 cont., 2125 int., 3500 peak w/dual flats and crosshole • Drain port SAE 6• RPM 600 min., 3600 max. • Rqd. filtration 20 Micron • Size 6⅛˝ x 4¾˝ x 5˝• 11 GPM at 3600 RPM (fully stroked) • Oil 10cSt (60 SUS) viscosity • Shpg. 10 lbs.

DDC ShaftITEM Model Rot. Location Shaft Price9-8235 101013000011 CCW Left ⅝˝ dia. 19T spline x 1¼˝ $114.999-8236 101013000008 CCW Left 15mm x 2˝ w/keyway $114.999-8250 101013000026 CW Left ⅝˝ dia. 19T spline x 1¼˝ $114.99

Displ. 1.10 cu. in.SPECIFICATIONS FOR ALL• Disp. 1.10 cu. in. (18 cc) • Mount SAE A 2 bolt • Inlet port SAE 6• Pump type variable piston • DDC shaft 0.59˝ (15mm) dia. • Work ports SAE 8• PSI 1425 cont., 2125 int., 3500 peak w/dual flats and crosshole • Drain port SAE 8• RPM 600 min., 3600 max. • Rqd. filtration 20 Micron • Size 715/16˝ x 6¼˝ x 5⅜˝• 15.5 GPM at max. speed (fully stroked) • Oil 10cSt (60 SUS) viscosity • Shpg. 17 lbs.

DDC ShaftITEM Model Rot. Location Shaft Price9-8238-L 101018000010 CW Left 17mm x 2.17˝ w/keyway $119.999-8238-R 101018000009 CW Right 17mm x 2.17˝ w/keyway $119.999-8239-L 101018000012 CCW Left 17mm x 2.17˝ w/keyway $119.999-8239-R 101018000012 CCW Right 17mm x 2.17˝ w/keyway $119.99


EquipmentCase

ITEM 1-3664 $9.99• Used, plastic travel case. Originally forphotographic equipment. Aluminum centerband and piano hinge. Interior foam can beremoved for other uses.SPECIFICATIONS• Handles1: suitcase style2: spring loaded 5/16˝ dia. steel w/rubber cushions

• Latches 2• Size 26˝ x 18˝ x 10˝• Shpg. 15 lbs. (+ oversize fee)



UtilityCabinet

ITEM 1-2461$79.95

• New. Six drawer utility cabinet. Ideal forunder-counter cabinet for workshops, re-tail stores, home use, and other storageapplications. Solid oak drawer fronts andsides with dado construction. Upper 2drawers are open frame originally de -signed for cash drawers. Bottom 4 draw-ers have inside dimensions of 19½˝ x 21¾˝x 5˝. Individual color coded keyed locks onbottom 4 drawers. Clear protective finishon front, painted sides and top. Outside di-mensions: 23˝ x 25¼˝ x 41˝. Shpg. 250 lbs.

Truck freight only.


Motor

ITEM 9-9133 $499.95• New WHITE Model GMV320 660-N401hydraulic gerotor motor. Cast iron housing.160mm pilot diameter.SPECIFICATIONS• Disp. 19.5 cu. in. / rev. • Rotation reversible• Motor Type Gerotor • Mount 4 bolt on 7⅞˝ B.C.• PSI 3000 cont., 3500 int. • Shaft 50mm diam. x 3¼˝• Torque: with 14mm key9315 in-lbs. cont. • Ports 1˝ B.S.P.P.10867 in-lbs. int. • Case drain 1/4˝ B.S.P.P.• RPM 473 cont., 556 int. • Size 10⅛˝ x 7˝ x 7˝• GPM 40 cont., 47 int. • Shpg. 76 lbs.

16 RPM, 2 HP Gearmotor

ITEM 5-1775 $899.99• New Reliance Electric Duty Mastermotor with Dodge Quantis right anglehelical bevel gear reducer. Motor has182TC frame and rated for variable fre-quency inverter or sine wave duty.Mounts from 4 hole pattern on bottomand back face of gearbox. ReducerModel BB1083CN180 TC rated for up to6.8 HP input and 26553 in lbs. output.SPECIFICATIONS• Speed 16 RPM • Rotation reversible• Voltage 230/460 AC • Duty continuous• Three phase • Enclosure TEFC• Amperage 7.6/3.8 • Mount 6.57˝ x 8.76˝• Power 2 HP • Shaft 2⅜˝ dia. x 5˝• Torque 7815 in-lbs. • Size 37˝ x 10˝ x 13½˝• Gear ratio 108.52:1 • Shpg. 500 lbs.

Truck freight only.

65 RPM, 1.5 HP Gearmotor

ITEM 5-1774 $799.99• New Reliance Electric Duty Mastermotor with Dodge Quantis right anglehelical bevel gear reducer. Motor has182TC frame and rated for variable fre-quency inverter or sine wave duty.Mounts from 4 hole pattern on bottomand back face of gearbox. ReducerModel BB483 CN1 80 TC rated for up to 4HP input and 3983 in lbs. output.SPECIFICATIONS• Speed 65 RPM • Rotation reversible• Voltage 230/460 AC • Duty continuous• Three phase • Enclosure TEFC• Amperage 7.6/3.8 • Mount 4.72˝ x 5.12˝• Power 1.5 HP • Shaft 1⅝˝ dia. x 3˝• Torque 1485 in - lbs. • Size 29˝ x 13˝ 9˝• Gear ratio 28.55:1 • Shpg. 215 lbs.

Truck freight only.

3˝ x 13⁄16˝ SwivelPlate CasterWith Brake

ITEM 1-3765$1.99• New, JARVIS swivel plate caster withwheel brake. Hard rubber wheel withplated steel caster yoke.SPECIFICATIONS • Mounting height 3½˝• Wheel size 3˝ dia. x 13/16˝ • Mount 4 bolt 1˝ x 2⅛˝ ctrs.• Load capacity 100 lbs. • Bolt holes ¼˝ diam.• Top plate 2⅝˝ x 1¾˝ • Shpg. 1 lb.

2.5 cu. in. WhiteHydraulic

Motor

ITEM 9-8287 $79.99• New, WHITE DRIVE PRODUCTS WR Se-ries Model 255040F3DD22AAAA hydraulicmotor. The WR Series motor incorporates thelatest advances for smooth performance, ef-ficiency and durability. Features include anoptimized Roller Stator with seven precisionrollers, three-zone spool valve, integral checkvalves, high pressure shaft seal and a provi-sion for a case drain to reduce pressure oninternal seals to improve product life. Inter-changeable with the following motor lines:Dynamic BMPH, Danfoss DH, Char-LynnH/S, Parker/Ross MG/TB.SPECIFICATIONS • GPM 12 cont., 16 int.• Disp. 2.5 cu. in. / rev. • Rotation reversible• Motor Type Roller Stator • Mount 4 bolt 3.25˝ B.C.• PSI 2250 cont., 3000 int. • Shaft 1˝ dia. x 1¾˝ keyed• Torque • Ports SAE 10823 in-lbs. cont. • Case drain SAE 41088 in-lbs. int. • Size 5⅝˝ x 4˝ x 4˝


12 Volt DCMuffinFan

ITEM 16-1445$4.99• New, SANYO DENKI Model 109R 1212 -H1071 muffin fan. Brushless motor. 3rdwire for tachometer output. Plastic frameand blades.SPECIFICATIONS • Speed 2600 RPM• Flow 102 CFM max. • Mount 4 hole 4⅛˝ ctrs.• Static press. 0.26 in. H2O • Blade dia. 4⅜˝• Voltage 12 DC • Number of blades 7• Amperage 0.52 Amps • Size 4¾˝ x 4¾˝ x 1¼˝• Power 6.25 Watts • Shpg. 1 lb.

1980 CFM,12 VDCFan

ITEM 16-1442 $109.95• New, DCM Mfg Model TA14R2010 axialfan. Configured to pull air. Blades can beremoved and reversed for pusher opera-tion. Motor sealed against dust and water.Curved plastic blades and housing. Sock-ets for optional right angle mountingbrackets (not included).SPECIFICATIONS• Flow 1980 CFM max • Mounting pattern 1:• Voltage 12 DC 4 holes 7.5˝ x 13˝• Amperage 18.7 Amps max • Mounting pattern 2:• Static press. 1.2˝ H20 max 12 holes 14.66 B.C.• Mnt. 4 holes on 13¼˝ B.C. • Size 15.04˝ dia. x 3.32˝• Blade dia. 14˝ • Shpg. 8 lbs.

ZTR Left/Right TransaxleAssembly

ITEM 13-1489$599.99• New, HYDRO-GEAR ZT-2200 EZTSeries Models ZC-DHBB-4M7C-3FPAand ZC-AHBB-4M7B-2FPA zero-turnstyle hydrostatic transaxles. Includes a leftand right transaxle for building ZTR vehicles orfor use as replacement on equipment. Integrated10cc variable displacement axial pump and a 10cc fixed dis-placement drive motor. Features include a die cast aluminum housing, belt-driveinput pulley with fan, single control lever per unit for forward/reverse and speedcontrol, disengagement lever to allow freewheeling, four bolt hub for direct mounting ofwheel and parking brake.SPECIFICATIONS• Input 3000 RPM max. • Max. weight per axle • Axle lgth. 4⅛˝ housing to face of hub• Overall reduction 19.2:1 18˝ diam. tire 340 lbs. • Output 4 bolt wheel hub on 4˝ B.C.• Output speed 0-150 RPM 20˝ diam. tire 300 lbs. • Mount 6 hole• Engine size 18-22 HP • Max. tire dia. 20˝ • Lubrication 20W-50 oil• Output torque • Input rotation CW • Size 14¾˝ x 14¼˝ x 10¼˝Cont. 115 ft-lbs., Int. 150 ft-lbs. • Input 4½˝ dia. pulley for ½˝ belt • Shpg. 76 lbs.

8000 lb. Worm GearWinch

ITEM 315-B $679.95• Brand new, heavy duty worm-gearwinch. Made to be driven with a vehiclePTO shaft, with an electric motor or a hy-draulic motor. Fully automatic safety brakeand dog clutch for free-spooling. Built witha safety factor of 3:1. Enclosed gears runin oil. Roller bearings.SPECIFICATIONS • 29:1 gear ratio• 8000 lb. rated line pull • Shaft 25 mm diam. x 1¼˝• Drum dimensions • Drum capacity4⅛˝ diameter hub 325’ of ⅜˝ cable10¾˝ diam. flange, 470’ of 5/16˝ cable9⅞˝ between flanges 735’ of ¼˝ cable

• Size 24˝ x 14˝ x 12½˝ • Shpg. 160 lbs.Truck freight only.

High Torque, Low Speed Hydraulic Motors

• New, DYNAMIC JPPS series hy-draulic motors. Rolortorc power ele-ment. High efficiency low, noise, hightorque low speed motors. Combinationof needle and roller bearings on theoutput shaft permit high radial forces.

SPECIFICATIONS• Reversible rotation • Shaft 1˝ diam. x 1⅝˝ w/woodruff key • Cont. pressure 1400 PSI• Max. pressure 2000 PSI • Ports ½˝ NPT

Performance based on 1400 PSI2 Bolt Item 4 Bolt Item Displ. Torque RPM GPM Shpg. Price9-7906-50 9-7907-50 3.04 539 1062 15 14 lbs. $ 99.999-7906-63 9-7907-63 3.89 681 847 15 14 lbs. $ 99.999-7906-100 9-7907-100 6.11 1062 640 18 16 lbs. $104.999-7906-125 9-7907-125 7.7 1354 512 18 16 lbs. $109.999-7906-160 9-7907-160 9.78 1725 400 18 17 lbs. $109.999-7906-200 9-7907-200 12.05 2115 328 18 17 lbs. $114.999-7906-250 9-7907-250 15.12 2655 261 18 18 lbs. $114.999-7906-305 9-7907-305 18.97 3345 210 18 19 lbs. $119.99

800-488-3407 Just Arrived! 179&

Order Online www.surpluscenter.com or by Phone 1-800-488-3407Complete Order Information And Shipping Rates Can Be Found On Pages 146 - 147

Vehicle Color CameraObservation

System

ITEM 11-3316 $262.95• Brand new, color rear observation kit fortrucks, buses, RV’s, construction equip-ment. Improves safety where visibility is re-stricted. Audio function. Wireless handheldremote control. Adjustable bracket andrain/sun shade on camera. 18 LED’saround camera lens to provide night vision.Furnished with 1 camera, inputs for 2 ad-ditional cameras (purchased separately).View from additional cameras can be setfor normal or mirrored image. Multi-lan-guage screen display. Automatic cameraheating below 14°.SPECIFICATIONS • Cable length 65 ft.• Screen 7˝ color LCD • Monitor size 7˝ x 1˝ x 5˝• Operating voltage 12-24 DC • Camera size 3˝ x 2˝ x 1¾˝• Night vision range 5 meters • Control box size• Camera viewing angle 120° 5⅛˝ x 2⅞˝ x 1¼˝• Screen format 16:9/4:3 • Shpg. 7 lbs.

Extra Color Camera ForVehicle ObservationSystemITEM 11-3316-C$110.95• Brand new, extra color camera for ITEM11-3316. Adjustable bracket and rain/sunshade. 18 LED’s around camera lens toprovide night vision. Automatic cameraheating below 14°.SPECIFICATIONS• Operating voltage 12-24 DC • Cable length 65 ft.• Night vision range 5 meters • Size 3˝ x 2˝ x 1¾˝• Camera viewing angle 120° • Shpg. 5 lbs.

12 Volt DCMuffinFanITEM 16-1444$1.99• New, SUNON Model KDE12085PHV3miniature muffin fan. Brushless motor. 3rdwire for tachometer output. Plastic frameand blades.SPECIFICATIONS • Speed 3700 RPM• Flow 10.2 CFM max. • Mount 4 hole 40mm ctrs.• Static press. 0.23 in. H2O • Blade dia. 0.493• Voltage 12 DC • Number of blades 7• Amperage 0.035 Amps • Size 50mm x 50mm x 15mm• Power 0.5 Watts • Shpg. ¼ lb.

120/240 VAC GeneratorPanel

ITEM 11-3306$8.99

• New, generator panel outlet enclosurebox with hinged cover. Electrical compo-nents are mounted in a plastic enclosuredesigned for surface mounting to a panel.Four stud mount for use with 3/16˝ threadcutting speed nuts. One twist-lock and twoduplex receptacle outlets. Two push-but-ton reset circuit breakers. Use for genera-tors, electrical panels, power center for aworkbench, or remove the components toinstall in other applications.SPECIFICATIONS• 240/120 Outlet: NEMA L14-30, 30 amp twist-lock• 120 Outlets: 3-prong 20 amp duplex• Circuit breaker rating 20 amps• Panel opening 8˝ x 5⅛˝ • Face size 8½˝ x 6⅛˝• Mtg. studs 3/16˝ dia. • Size 4⅞˝ x 8½˝ x 6⅛˝c/c 6½˝ x 521/32˝ • Shpg. 4 lbs.


115 VAC Fan Motors• New, made for Broan/Nutone fans. Ther-mal overload protection. Air over design.115 volt AC, single phase, open enclosure,continuous duty.

ITEM 10-2614$6.99SPECIFICATIONS• Model 5KSM84DFK132P • 1⅛˝ hex mounts each end• Amperage 0.56 Amps • Shaft 5/16˝ dia. x ⅜˝ w/flat• Speed 1550 RPM • Size 3.3˝ dia x 2½˝• Rotation CW • Shpg. 3 lbs.

ITEM 10-2613$7.99• Includes 5˝ cord with plug.SPECIFICATIONS • Mount 2 studs on back• Model 5KSM84DFK212AP 2⅞˝ c/c• Amperage 1.2 Amps • Shaft ¼˝ dia. x ⅞˝ w/flat• Speed 1550 RPM • Size 3.3˝ dia x 2˝• Rotation CCW • Shpg. 2 lbs.

Catalog 285 2012 Edition SURPLUS CENTER1015 West ”O“ StreetLincoln, NE 68528

SOURCE CODE

SU

RPLU

S C

EN

TER

CA

TALO

G 285 2012 E

DIT

ION

SURPLUSCENTER®

Catalog 285 - 2012 Edition

Order Onlineor

by Phone!

www.surpluscenter.comor

1-800-488-3407Toll Free FAX 877-474-5198

2.5 HP PowerProGas Engine

ITEM 28-1623$135.99

• Brand new PowerPro. Engine featuresoverhead valves, cast iron sleeve liners,mechanical governor, replaceable valveguides and automatic decompression foreasier starting and exceptional operation.Oil alert system. Emissions compliant in allstates except CA.SPECIFICATIONS • Shaft ⅝˝ diam. x 27/16˝• 2.5 HP w/keyway• 3600 RPM • 4 bolt 35/8˝ B.C. auxiliary• Displ. 5.92 cu. in. mount on PTO side• Bore/stroke 2.05˝ x 1.77˝ • Size 9˝ x 10½˝ x 13½˝• Fuel tank capacity 1½ qt. • Shpg. 25 lbs.

Ammo BoxesITEM 1-3324

ITEM 1-2261

• U.S. military surplus ammo boxes. Steelcon struc tion with removable rubber gas-keted lid.

ITEM 1-2261 $18.95• 40mm. Size 19˝ x 6⅛˝ x 11˝. Shpg. 17 lbs.

ITEM 1-3324 $19.95• 120mm. Size 12¾˝ x 6¼˝ x 31⅞˝. Shpg.22 lbs.

3½˝ x 1¼˝RubberWheelITEM 1-3734$2.99• New, JARVIS wheel. Black neoprene rub-ber tread permanently compressed be-tween two bright nickel plated steel discsthat are welded together.SPECIFICATIONS • Bore thru-length 1⅝˝• Size 3½˝ dia. x 1¼˝ w. • Bearing ball• Load capacity 200 lbs. • Hub centered• Bore ⅜˝ diam. • Shpg. 1½ lbs.

AmmoBoxes

• U.S. military surplus 0.50 caliber ammoboxes. Steel con struc tion with end-hingeand gasket on lid.

ITEM 1-1099 $8.95• Size 11¾˝ x 7¼˝ x 6⅛˝. Shpg. 6 lbs.

ITEM 1-1121 $6.95• 7.62 mm. Size 11˝ x 4˝ x 7˝. Shpg. 5 lbs.






6˝ x 36¾˝ x 2½˝Hydraulic Cylinder

ITEM 9-8025 $599.99• New, EAGLE HYDRAULICS ModelHBU6036-2500-HC hydraulic double act-ing cylinder.SPECIFICATIONS• Double acting • Retracted lgth. 48˝• Bore x Stroke 6˝ x 36˝ • Crosstube ends• Pressure 2500 PSI max. rod 4˝ w., base 6¾˝ w.• Rod dia. 2½˝ • Pin holes 1½˝• Ports ¾˝ NPT • Shpg. 240 lbs.

Truck freight only.


Engine

ITEM 28-1784$219.99

• New, BRIGGS & STRATTON Intek over-head valve horizontal shaft gas engine. Dura-bore cast iron cylinder sleeve. Featuresmanual choke and throttle, fuel shutoff valve.SPECIFICATIONS• Model 12T412-0113-F8 • Shaft horizontal• Engine family 7BSXS.2051HD • Shaft ¾˝ dia. x 25/16˝• Power 6 HP w/keyway• Torque 9 ft-lbs. • Mount 3⅛˝ x 6⅜˝• Bore/Stroke 2.688˝/2.20˝ • Accessory mnt. 3⅝˝ B.C.• Disp. 205 cc. • Fuel tank 1 gal.• Speed 3600 RPM • Size 16½˝ x 12¼˝ x 16¼˝• Start recoil • Shpg. 42 lbs.

120 VAC Red LEDTraffic LightITEM 11-3310$11.95• Removed from service. ECOLUX red 8˝ di-ameter traffic signal light. Multiple red LEDassembly provides high intensity light, longlife, and low power requirements. Black plas-tic housing with red lens and rubber gasket.SPECIFICATIONS • 7¾˝ diameter red lens• 120 VAC • Overall size• 4-6 Watts 8⅜˝ dia. x 3½˝ deep• 60 Hertz • Shpg. 3 lbs.

12 VDC Hyd. DoubleSelectorValve

ITEM 9-7852 $159.99• New, 12 volt DC solenoid operated dou-ble selector valve. Allows one directionalvalve to operate two independent cylin-ders. Energizing coil shifts from cylinder 1to cylinder 2. Ideal for adding a “thumb” tobuckets on loaders.SPECIFICATIONS• Flow rate 13.2 GPM • Connector Hirschmann• Pressure 2500 PSI max. • Ports six SAE 8• Coil voltage 12 VDC • Size 7¼˝ x 2⅝˝ x 2½˝• Current 3 amps • Shpg. 8 lbs.

PRSRT STDUS POSTAGE

PAIDBEAVER DAM, WI

PERMIT #577

surplus center catalog 2012

Documents