SurfBeam®2 Pro Portable Quick Start Guide 1139141_003 Feb. 14, 2013

Step 1: Assembly and Connections

NOTE: When connecting to the power source, the integrity of the protective earth ground must be ensured, so that the equipment is connected to a socket-outlet with a protective earth ground connection.

NOTE: Router IP address: 192.168.1.1 Modem IP address: 192.168.100.1 Default router password is: admin

Step 2: Pointing

1. Wait for the display shown below to appear and press “Enter” to get to main menu.

2. Use arrow keys to select “Pointing” and press “Enter.”

3. Wait for “Long” and “Lat” screen to appear, and then press “Enter.”

4. Set coarse elevation to the value listed on the LCD display, and then lock the antenna dish down.

5. Loosen azimuth lock nuts and set the coarse azimuth.

Page 1

SurfBeam®2 Pro Portable Quick Start Guide 1139141_003 Feb. 14, 2013

6. Fine tune azimuth using knob shown below until “Locked” appears in the Status display and the peak SNR equals the SNR value (target SNR > 12dB). Lock down azimuth and repeat procedure for fine tune elevation using the knobs shown below and press “Enter” to continue.

Once the satellite has been acquired, the terminal is ready for use. The internet, or streaming video, can be accessed using the laptop.

Page 2

2012-2013 ViaSat, Inc. This product includes OpenWrt open source software made available under the GNU General Public License version 2 (GPL V2) as published by the Free Software Foundation. As such, the software is distributed WITHOUT ANY WARRANTY, and to the extent permitted by law, we EXCLUDE ALL WARRANTIES, including the warranties of MERCHANTABILITY and FITNESS FOR A PARTICULAR PURPOSE. Copies of the GPL V2 license can be obtained online at www.gnu.org or in writing from the Free Software Foundation Inc., 51 Franklin Street, Fifth Floor, Boston MA 92110-1301 USA. In compliance with GPL V 2, copies of the modified source code for OpenWrt may be requested in writing by contacting ViaSat, Inc., attn: General Counsel / Source Code Request, 6155 El Camino Real, Carlsbad CA 92009 USA. Your request should clearly identify the product and open source software component(s) to which your request relates.