surface layer characterization of atomized magnesium for
TRANSCRIPT
![Page 1: Surface Layer Characterization of Atomized Magnesium for](https://reader031.vdocuments.us/reader031/viewer/2022020707/61fe58af230b5514ed609af3/html5/thumbnails/1.jpg)
Surface Layer Characterization of Atomized Magnesium for use in
Powder Metallurgy Products
Materials Engineering ProgramProcess Engineering and Applied ScienceDalhousie University1360 Barrington St., Halifax, NS, B3J 2X4
Paul Burke and Georges J. Kipouros
![Page 2: Surface Layer Characterization of Atomized Magnesium for](https://reader031.vdocuments.us/reader031/viewer/2022020707/61fe58af230b5514ed609af3/html5/thumbnails/2.jpg)
Outline
• Introduction•Background•Surface Contaminants•Mg Surface Contaminants•Mg Sintering Strategies•Future Work•Acknowledgments
![Page 3: Surface Layer Characterization of Atomized Magnesium for](https://reader031.vdocuments.us/reader031/viewer/2022020707/61fe58af230b5514ed609af3/html5/thumbnails/3.jpg)
Introduction
Aluminum
Magnesium
Benefits of Magnesium
•High stiffness to weight ratio•High damping capacity•Recyclable
Issues with Magnesium
•Lack of developed alloys•Difficult forming•Corrosion
![Page 4: Surface Layer Characterization of Atomized Magnesium for](https://reader031.vdocuments.us/reader031/viewer/2022020707/61fe58af230b5514ed609af3/html5/thumbnails/4.jpg)
Introduction
Powder Metallurgy•Powder metal feedstock•Compacted at high pressure in specially shaped die•Sintered at temperature below melting•Near-net shape parts
•Mg P/M largely unexplored
![Page 5: Surface Layer Characterization of Atomized Magnesium for](https://reader031.vdocuments.us/reader031/viewer/2022020707/61fe58af230b5514ed609af3/html5/thumbnails/5.jpg)
Sintering of Metal Powders
• Stages of sintering»Point contact (A)»Initial stage (B)»Intermediate stage (C)»Final stage (D)
A B C D
![Page 6: Surface Layer Characterization of Atomized Magnesium for](https://reader031.vdocuments.us/reader031/viewer/2022020707/61fe58af230b5514ed609af3/html5/thumbnails/6.jpg)
Surface Contaminantson Metal Powders
• Metal core• Surface layer
–Oxide?–Hydroxide?–Carbonate?–Thickness?
![Page 7: Surface Layer Characterization of Atomized Magnesium for](https://reader031.vdocuments.us/reader031/viewer/2022020707/61fe58af230b5514ed609af3/html5/thumbnails/7.jpg)
Surface Contaminants
• Characterizing surface layer– Auger electron spectroscopy
(AES)– X-ray photoelectron
spectroscopy (XPS)– Secondary ion mass
spectroscopy (SIMS)
– Transmission electron microscopy (TEM)
![Page 8: Surface Layer Characterization of Atomized Magnesium for](https://reader031.vdocuments.us/reader031/viewer/2022020707/61fe58af230b5514ed609af3/html5/thumbnails/8.jpg)
Surface Contaminants and Sintering
•Dealing with the surface layer
–Dissolve layer into metal–Diffuse metal through layer–Thermo-chemical reduction
![Page 9: Surface Layer Characterization of Atomized Magnesium for](https://reader031.vdocuments.us/reader031/viewer/2022020707/61fe58af230b5514ed609af3/html5/thumbnails/9.jpg)
Surface Contaminants and Sintering
• Dissolve layer into metal
– Depends on oxygen solubility in metal– Sintering preceded by incubation period
•Fe ~10 seconds•Al ~ 100+ days (Estimate)•Mg ~100+ days (Estimate)
![Page 10: Surface Layer Characterization of Atomized Magnesium for](https://reader031.vdocuments.us/reader031/viewer/2022020707/61fe58af230b5514ed609af3/html5/thumbnails/10.jpg)
Surface Contaminants and Sintering
•Diffuse metal through layer–Depends on diffusion rates and layer
thicknessDM
m2 sec-1
DOxm2 sec-1
Cu 5.65 x 10-13 6.65 x 10-12
Al 1.84 x 10-12 5.51 x 10-30
Mg 3.01 x 10-12 5.25 x 10-24
![Page 11: Surface Layer Characterization of Atomized Magnesium for](https://reader031.vdocuments.us/reader031/viewer/2022020707/61fe58af230b5514ed609af3/html5/thumbnails/11.jpg)
Surface Contaminants and Sintering
• Thermo-chemical reduction• Free energy diagram
– Appropriate temperature, pressure and atmosphere
– Addition of more reactive metal (Mg in Al)
![Page 12: Surface Layer Characterization of Atomized Magnesium for](https://reader031.vdocuments.us/reader031/viewer/2022020707/61fe58af230b5514ed609af3/html5/thumbnails/12.jpg)
Surface Contaminants and Sintering
• Break layer
– Create short-circuit pathway for diffusion through cracks in layer
– Accomplished mechanically or chemically
![Page 13: Surface Layer Characterization of Atomized Magnesium for](https://reader031.vdocuments.us/reader031/viewer/2022020707/61fe58af230b5514ed609af3/html5/thumbnails/13.jpg)
Mg Surface Contaminants
• When exposed to air, MgO forms with Mg(OH)2on the surface
• Thickness depends on exposure time– 1 min, 2.65 nm– 7 days, 5.31 nm– 7 years, 5.67 nm
XPS of Mg Surface
![Page 14: Surface Layer Characterization of Atomized Magnesium for](https://reader031.vdocuments.us/reader031/viewer/2022020707/61fe58af230b5514ed609af3/html5/thumbnails/14.jpg)
Research Objective
• Fundamentals of magnesium sintering– Composition and thickness of surface layer
by AES, XPS, SIMS, FIB/TEM– Decomposition reactions during sintering by
DSC, DTA, TGA
• Practical strategies to aid sintering and mechanical properties
![Page 15: Surface Layer Characterization of Atomized Magnesium for](https://reader031.vdocuments.us/reader031/viewer/2022020707/61fe58af230b5514ed609af3/html5/thumbnails/15.jpg)
Mg Atomized Powder Surface Contaminants (TEM)
![Page 16: Surface Layer Characterization of Atomized Magnesium for](https://reader031.vdocuments.us/reader031/viewer/2022020707/61fe58af230b5514ed609af3/html5/thumbnails/16.jpg)
Mg Atomized Powder Surface Contaminants (XPS)
1200
1300
1400
1500
1600
1700
1800
1900
2000
2100
2200
2300
2400
2500
2600
2700
2800
2900
3000
3100
3200
3300
3400
282283284285286287288289290291292293294295296297298299
Cou
nts
/ s
Binding Energy (eV)
C 1s
C1s
C1s A
C1s B
C1s C
C1s D
XPS identified that the surface contained:
–Magnesium–Oxygen–Carbon
![Page 17: Surface Layer Characterization of Atomized Magnesium for](https://reader031.vdocuments.us/reader031/viewer/2022020707/61fe58af230b5514ed609af3/html5/thumbnails/17.jpg)
Mg Sintering Strategies(Increased sintering time)
• Pure Mg• 600ºC
• 40 min
• Pure Mg• 600ºC• 6 hours
![Page 18: Surface Layer Characterization of Atomized Magnesium for](https://reader031.vdocuments.us/reader031/viewer/2022020707/61fe58af230b5514ed609af3/html5/thumbnails/18.jpg)
Mg Sintering Strategies(Thermo-chemical reduction)
Elements with more stable oxides:– Yb– Be– Dy– Ca– Y
![Page 19: Surface Layer Characterization of Atomized Magnesium for](https://reader031.vdocuments.us/reader031/viewer/2022020707/61fe58af230b5514ed609af3/html5/thumbnails/19.jpg)
Mg Sintering Strategies(Thermo-chemical reduction)
• 1 wt% Y• 600ºC
• 40 min
![Page 20: Surface Layer Characterization of Atomized Magnesium for](https://reader031.vdocuments.us/reader031/viewer/2022020707/61fe58af230b5514ed609af3/html5/thumbnails/20.jpg)
Mg Sintering Strategies(Thermo-chemical reduction)
• 1 wt% Ca• 600ºC
• 40 min
![Page 21: Surface Layer Characterization of Atomized Magnesium for](https://reader031.vdocuments.us/reader031/viewer/2022020707/61fe58af230b5514ed609af3/html5/thumbnails/21.jpg)
Mg Sintering Strategies(Post Sintering Forging)
• Samples of 95% or greater density will withstand hot or cold rolling to further increase density
– 50% cold reduction, 150% hot reduction– Density increases near theoretical– Large increase in hardness
![Page 22: Surface Layer Characterization of Atomized Magnesium for](https://reader031.vdocuments.us/reader031/viewer/2022020707/61fe58af230b5514ed609af3/html5/thumbnails/22.jpg)
Mg Sintering Strategies(Sintering Atmosphere)
• Compacts can be sintered in argon or nitrogen
• During sintering, gas can become trapped as porosity closes– Argon completely inert, pressure inside pore
prevents densification– Nitrogen may react, reducing pressure inside
pore
![Page 23: Surface Layer Characterization of Atomized Magnesium for](https://reader031.vdocuments.us/reader031/viewer/2022020707/61fe58af230b5514ed609af3/html5/thumbnails/23.jpg)
Mg Sintering Strategies(Powder Pre-Treatment)
• Before processing, Mg powder can be dipped with a solution designed to dissolve the surface layer
– Acids, bases, organic compounds possible– Difficulty arises when solution comes into
contact with fresh Mg surface
![Page 24: Surface Layer Characterization of Atomized Magnesium for](https://reader031.vdocuments.us/reader031/viewer/2022020707/61fe58af230b5514ed609af3/html5/thumbnails/24.jpg)
Experiment for FIB/TEM• Expose Mg powder (~ 50 μm) to air:
– One day– Two days– Five days– Seven days
• Examination by FIB/TEM/EDS. Avoid:
– Water, oxygen– Organic solvent– Destruction of film
![Page 25: Surface Layer Characterization of Atomized Magnesium for](https://reader031.vdocuments.us/reader031/viewer/2022020707/61fe58af230b5514ed609af3/html5/thumbnails/25.jpg)
A Micrion-2500 Single Beam FIB System
- 5 nm imaging resolution using a focused Ga ion beam.
- Beam current ranges from 1 pA to 40 nA.
- “Stress free” site specific cross-sectioning and imaging.
- Gas assisted etching and precise metal and oxide deposition.
-Secondary electron (SE) and secondary iron imaging.
![Page 26: Surface Layer Characterization of Atomized Magnesium for](https://reader031.vdocuments.us/reader031/viewer/2022020707/61fe58af230b5514ed609af3/html5/thumbnails/26.jpg)
e-
e-
Ga+
e-
e-
e-
e-
e-
e-
e-
e-
i+
i+
e-
e-
e-
e-
e-
e-e- e-
e-
e-
e-
Gas
Gas Gas
Gas
Gas
Electron Flood GunEtching/Deposition Gas
i+
i+
Detector
Specimen
Schematic Diagram of a Typical FIB System
e-
e-
Ga+
e-
e-
e-
e-
e-
e-
e-
e-
i+
i+
e-
e-
e-
e-
e-
e-e- e-
e-
e-
e-
Gas
Gas Gas
Gas
Gas
Electron Flood GunEtching/Deposition Gas
i+
i+
Detector
Specimen
Schematic Diagram of a Typical FIB System
e-
e-
Ga+
e-
e-
e-
e-
e-
e-
e-
e-
i+
i+
e-
e-
e-
e-
e-
e-e- e-
e-
e-
e-
Gas
Gas Gas
Gas
Gas
Electron Flood GunEtching/Deposition Gas
i+
i+
Detector
Specimen
e-e-
e-
Ga+
e-
e-
e-
e-
e-
e-
e-
e-
i+
i+
e-
e-
e-
e-
e-
e-e- e-
e-
e-
e-
Gas
Gas Gas
Gas
Gas
Electron Flood GunEtching/Deposition Gas
i+
i+
Detector
Specimen
e-
Ga+
e-
e-
e-
e-
e-
e-
e-
e-
i+
i+
e-
e-
e-
e-
e-
e-e- e-
e-
e-
e-
Gas
Gas Gas
Gas
Gas
Electron Flood GunEtching/Deposition Gas
i+
i+
Detector
Specimen
e-
Ga+
e-
e-
e-
e-
e-
e-
e-
e-
i+
i+
e-
e-
e-
e-
e-
e-e- e-
e-
e-
e-
Gas
Gas Gas
Gas
Gas
Electron Flood GunEtching/Deposition Gas
i+
i+
Detector
Specimen
e-e-
Ga+
e-e-
e-e-
e-e-
e-e-
e-e-
e-e-
e-e-
e-e-
i+
i+
e-e-
e-e-
e-e-
e-e-
e-e-
e-e-e-e- e-e-
e-e-
e-e-
e-e-
Gas
Gas Gas
Gas
Gas
Electron Flood GunEtching/Deposition Gas
i+
i+
Detector
Specimen
Schematic Diagram of a Typical FIB SystemFocused Ion Beam Microscope
![Page 27: Surface Layer Characterization of Atomized Magnesium for](https://reader031.vdocuments.us/reader031/viewer/2022020707/61fe58af230b5514ed609af3/html5/thumbnails/27.jpg)
Focused Ion Beam (FIB) Microscopy
The FIB microscopes were developed in the early 1980s. It has been widely implemented in the semiconductor industry as semiconductor device modification, device failure analysis.
In recent years, FIB found many applications in materials studies.
Typical materials science applications include: Stress-free ion beam cross-sectioning and high-resolution ion beam imaging, site-specific TEM specimen preparation, micro-machining and micro-deposition.
![Page 28: Surface Layer Characterization of Atomized Magnesium for](https://reader031.vdocuments.us/reader031/viewer/2022020707/61fe58af230b5514ed609af3/html5/thumbnails/28.jpg)
FIB TEM Sample Preparation TechniquesFIB TEM Sample Preparation TechniquesTraditional H-bar technique
![Page 29: Surface Layer Characterization of Atomized Magnesium for](https://reader031.vdocuments.us/reader031/viewer/2022020707/61fe58af230b5514ed609af3/html5/thumbnails/29.jpg)
Lift-out FIB TEM Sample Preparation Technique
![Page 30: Surface Layer Characterization of Atomized Magnesium for](https://reader031.vdocuments.us/reader031/viewer/2022020707/61fe58af230b5514ed609af3/html5/thumbnails/30.jpg)
A Mg particle is mounted onto the edge of the TEM grid using an external lift-out tool
![Page 31: Surface Layer Characterization of Atomized Magnesium for](https://reader031.vdocuments.us/reader031/viewer/2022020707/61fe58af230b5514ed609af3/html5/thumbnails/31.jpg)
![Page 32: Surface Layer Characterization of Atomized Magnesium for](https://reader031.vdocuments.us/reader031/viewer/2022020707/61fe58af230b5514ed609af3/html5/thumbnails/32.jpg)
![Page 33: Surface Layer Characterization of Atomized Magnesium for](https://reader031.vdocuments.us/reader031/viewer/2022020707/61fe58af230b5514ed609af3/html5/thumbnails/33.jpg)
![Page 34: Surface Layer Characterization of Atomized Magnesium for](https://reader031.vdocuments.us/reader031/viewer/2022020707/61fe58af230b5514ed609af3/html5/thumbnails/34.jpg)
FIB secondary electron image showing the thin film formed on the Mg particle
![Page 35: Surface Layer Characterization of Atomized Magnesium for](https://reader031.vdocuments.us/reader031/viewer/2022020707/61fe58af230b5514ed609af3/html5/thumbnails/35.jpg)
![Page 36: Surface Layer Characterization of Atomized Magnesium for](https://reader031.vdocuments.us/reader031/viewer/2022020707/61fe58af230b5514ed609af3/html5/thumbnails/36.jpg)
![Page 37: Surface Layer Characterization of Atomized Magnesium for](https://reader031.vdocuments.us/reader031/viewer/2022020707/61fe58af230b5514ed609af3/html5/thumbnails/37.jpg)
![Page 38: Surface Layer Characterization of Atomized Magnesium for](https://reader031.vdocuments.us/reader031/viewer/2022020707/61fe58af230b5514ed609af3/html5/thumbnails/38.jpg)
![Page 39: Surface Layer Characterization of Atomized Magnesium for](https://reader031.vdocuments.us/reader031/viewer/2022020707/61fe58af230b5514ed609af3/html5/thumbnails/39.jpg)
![Page 40: Surface Layer Characterization of Atomized Magnesium for](https://reader031.vdocuments.us/reader031/viewer/2022020707/61fe58af230b5514ed609af3/html5/thumbnails/40.jpg)
Future Work
• Continue FIB/TEM and XPS to identify layer constituents and thickness
• Confirm findings with AES, SIMS• Determine decomposition reactions by
thermal analysis (DSC, DTA, TGA) • Identify reduction mechanisms of Ca and Y• Add alloying additions for liquid formation,
strengthening and corrosion resistance
![Page 41: Surface Layer Characterization of Atomized Magnesium for](https://reader031.vdocuments.us/reader031/viewer/2022020707/61fe58af230b5514ed609af3/html5/thumbnails/41.jpg)
Acknowledgments
• Natural Sciences and Engineering Research Council (NSERC) of Canada
• Minerals Engineering Centre (MEC)
• Dr. Jian Li, Dr. C. Bibby (NRCan)
• Dr. Craig Bennett, Dr. Zeynel Bayindir
![Page 42: Surface Layer Characterization of Atomized Magnesium for](https://reader031.vdocuments.us/reader031/viewer/2022020707/61fe58af230b5514ed609af3/html5/thumbnails/42.jpg)
Thank you